Job Search Results

841 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/09/24 Monday 03:00PM Pacific Time by ContractJobHunter. )

Listings 1 - 841

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2314 - AVIONICS SYSTEMS INTEGRATOR - cv - in word doc only

Description:
Responsible Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and
responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems;

Participate in the Avionics Systems architecture design to meet

Support the Bombardier Flight Test Center in development and certification tests; witnessing of tests may be required;

Support the Final Assembly Line and In Service Aircraft for any development issues;

Manage, review and approve the deliverables of the Avionics System Suppliers;

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress;

Support other departments such as Production, Customer Support, Program Office and Product Planning;

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities;

University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent;

At least three (3) years of relevant experience with the design,

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft;

Good knowledge of RTCA documents DO-178 and DO-160;

Familiar with part FAR25/525 certification process and with the ARP4754 standard;

Proficient with the use of Microsoft Office software tools to produce presentation and reports.

Ability to work well in a team environment;

Strong communication skills (written and spoken).

Be able to travel is a must - USA &Toronto.

English - French working knowledge an asset
 
Job Number: 2314
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wkp
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 01/04/2018
Last Updated: 02/23/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2316 - PROPULSION-PNEUMATIC SYS. ENGINEER - cv in word doc only

Description:
Support the Global 7000/8000 Mod-line in Montreal by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Electrical and Avionic systems related issues, analyze and develop solutions/recommendations and reports.

Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests.

Track and ensure successful implementation of systems installations and modifications.

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations.

Recommend and review design changes.

Develop good working relationships with various departments within the company and with all suppliers.

Bachelor of Engineering Degree and eligibility for Professional Engineer registration.

15 years%u2019 experience in aircraft Propulsion and/or Pneumatic systems (High and Low Pressure Ducting, Environmental Control System, Avionics Cooling, Oxygen System, Power plant, Fuel systems, etc).

Must have a good knowledge of propulsion and air systems and their integration on the aircraft (APU Engines, low pressure and high pressure air systems, FIDEEX Systems, Fuel Systems).

AME license is an asset.

Experience in providing engineering support to a Final Line/ Production.

Conversant with design, qualification and certification test requirements of Propulsion and/or Pneumatic systems.

Able to to travel. Occasional business trips to Toronto and frequent travel between plants in Montreal. Will travel to Toronto, Pitfield and Air Canada Hanger in Montreal.

Must be familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Familiar with Microsoft Office software tools.

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Regular Shift = Afternoon Shift (3:30 to 12:00); occasionally may have to support other shifts (as required).
 
Job Number: 2316
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/08/2018
Last Updated: 02/23/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2320 - PROCESS ASSURANCE ENGINEER - cv - word doc only

Description:
Support the development and maintenance of process assurance plan(s).

Support the definition and development of the Bombardier Process Assurance processes, checklists and deliverables.

Plan, coordinate and participate in internal and supplier process assurance oversight activities.

Generate process assurance reports and process assurance findings as a result of the oversight activities.

Review and assess acceptability of corrective action plans addressing identified process assurance findings.

Conduct follow-up of corrective action plan implementation.

Collect measurements and provide metrics to support the development of regular visibility reports related to process assurance execution as well as oversight activity results.

Support the development and delivery of training to DADs / Integrators / Engineering Specialists in the Process Assurance methodology.

University degree in Engineering (or equivalent) with 5 to 10 years experience in the aerospace industry.

Knowledge of airworthiness, process assurance and/or quality assurance processes and requirements.

Experience in the development or verification of aircraft systems (using ARP4754A/4761 or equivalent standard) is required.
(The candidate may also have experience in the certification, development or testing of Software or airborne electronic hardware (AEH) according to structured development processes (RTCA/DO-178B or DO-254 or equivalent standard).

Knowledge of airworthiness, process assurance and/or quality assurance processes and requirements.

Display strong interpersonal and professional demeanor as a business representative of the company.

Must be willing to travel to support the process assurance audit/inspection activities.
 
Job Number: 2320
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/10/2018
Last Updated: 03/13/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2321 - PROPULSION SYSTEMS ENGINEER - cv. word doc only

Description:
Design and integration of the system;

Review of the design and documentation of all the aspects related to your system;

Checking for quality of the Supplier's analyses;

Validation and verification of system requirements;

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing;

Definition, preparation and execution of qualification and certification tests;

Working with supplier in the investigation and resolution of test findings;

Preparation or review of qualification or certification reports;

Working with suppliers to establish complete system requirements and system interfaces;

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments;

Provide support to business units in Propulsion Control requirement definition, verification and validation, following ARP4754

Identify issues and obstacles, follow-up and communicate progress;

Prepare reports or presentations.

Bachelor degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of eight (8) years.

Possess very good knowledge in Propulsion Control Systems and their integration on the aircraft.

Background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Familiarity with Part 25 Regulations and certification requirements.

Flight testing/testing experience is an asset.

Have good oral and technical writing skills in English and French knowledge is an asset.

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers.

Dynamic person with initiative, a strong sense of responsibility and good judgment

Have knowledge of MS Office software (essential).

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc).

Must be able to travel to USA (Wichita) to support Flight testing and supplier reviews (if required).
 
Job Number: 2321
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/11/2018
Last Updated: 05/18/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2327 - HYDRO-MECHANICAL SYSTEMS - FINAL ASSEMBLY LINE

Description:
Support the Client Mod-line in Montreal by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Hydro-Mechanical systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests

Track and ensure successful implementation of systems installations and modifications

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes

Develop good working relationships with various departments within BA and with all suppliers

Have a Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset

Have experience in providing engineering support to a Final Line/ Production

Have 15 or more years experience in aircraft Hydro-Mechanical systems (Fly-By-Wire & Control Surfaces, Wing High Lift, Hydraulics, Landing Gear, Brakes, etc)

Are Conversant with design, qualification and certification test requirements of Hydro-Mechanical systems

Have flexibility to travel.

Are Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration

Are familiar with Microsoft Office software tools

Have Strong communication skills, ability to work well in a multi-disciplinary team environment.

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc).

Afternoon Shift (3:30 to 12:00); occasionally may have to support other shifts (as required).

Occasional business trips to Toronto and frequent travel between plants in Montreal.
 
Job Number: 2327
Job Location: Toronto, Canada
Rate: 66.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 02/01/2018
Last Updated: 03/29/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

Software / Systems Engineer 3

Description:
PDS Tech, Inc. is seeking a Systems Engineer for an open position in El Segundo, CA
  • Primary Responsibilities:

    - Develops and maintains code and integrates software components into a fully functional software system and assists

    with test procedures and documenting test results to ensure software system requirements are met.

    - Supports software project management.

    - Troubleshoots software issues and works under general supervision.

Qualifications 

This position requires the ability to obtain a US Security Clearance, for which the US Government requires US Citizenship.
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.



Basic Qualifications:

- 2+ years of performing server software development in Java.

- 2+ years of experience developing ground control software.

- 1+ years of experience with SQL Server databases.

- 1+ years of experience with validation testing.

- Experience with software integration.

- Experience with XML.

Preferred Qualifications:

- Experience with avionics control algorithms, hardware interfaces and I/O device drivers, networking, SQL and nonrelational

databases, web-based development.

- Java software development experience running in the JBoss / Wild-Fly service bus.

- Experience with Payload Command generation and Payload Telemetry processing.

- JUnit Test experience.

- Experience performing JAXB code development.

- Experience with TCP/IP data transfer.
 
Job Number: 1810081318
Job Location: El Segundo, CA
Duration: 10 months
Input Date: 02/09/2018
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dl3hAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer with active secret / design of mechanical and electronic interfaces / integration test / serial buses C/C++ programming CA

Description:
160459
Requirement #AERO-REQ-0666
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 11/27/2017
End Date 11/09/2018
Number of Resources 1
Security Clearance Secret

Title: Aeronautical Engineer

Description

Candidate will be responsible for designing and building a system integration laboratory (SIL). This effort includes design of mechanical and electronic interfaces to support software development, integration and test efforts. Candidate will have hands-on hardware experience and software skills. Candidate will be able to troubleshoot hardware/software integration issues and perform integration and test. Define, develop, analyze and coordinate SIL requirements, allocate requirements and define interfaces between subsystems. Effort also includes flow down of requirements to procurement specifications, and management of vendor selection and vendor performance, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews. Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment. Complex organization and documentation skills are required.

Skill/Experience/Education

Mandatory:

Final Secret Clearance.

Hardware and software integration experience.
Demonstrated ability to design and troubleshoot mechanical and electronic interfaces to support software development and test.
C or C++ programming experience.
Experience with serial buses.

Desired:

B.S. Degree or above in an Engineering Discipline Several years of laboratory experience


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0666
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 12/04/2017
Last Updated: 03/15/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Electromechanical Engineers - Redondo Beach, CA

Description:
STS AeroStaff Services is hiring Aerospace Electromechanical Engineers in Redondo Beach, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• The responsibilities include mechanical design & analysis using computer-aided design (CAD), conducting packaging trades, tolerance and interference analyses, generating drawing packages & associated electronic data, and supporting the fabrication, assembly and test of the hardware

Required:

• 5 Years’ with Bachelors in Science; 3 Years’ with Masters; 0 Years’ with PhD
• A Bachelor of Science degree in a STEM (Science, Technology, Engineering or Math) discipline
• Electronic packaging, CAD, or mechanical design experience in an aerospace environment
• Demonstrated technical skills with experience supporting a multi-disciplined team
• Experience working with different partners across organizations and programs
• Proficient in performing tolerance and interference analyses
• Experience in generating and releasing product detail and assembly drawings
• Experience with PTC Creo / Intralink software applications

Desired:

• A Master’s Degree in Mechanical or Aerospace Engineering and 4+ years’ of engineering experience in an aerospace environment
• Experience with electronic packaging / mechanical design for airborne & space applications
• Electronics design development and sustaining experience spanning cradle to grave
• Experience with Enovia PLM software application
• Proficiency with electrical design, electronics manufacturing processes and qualification activities
• Familiarity with research and development of advanced packaging technologies
• Active Clearance

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41401
Job Location: Redondo Beach, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/05/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineering Design Checkers - Lexington, KY

Description:
STS AeroStaff Services is hiring Aerospace Engineering Design Checkers in Lexington, Kentucky.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Examines engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation
• This position will support engineers in the review of design data that will comply with applicable military specifications, SAE, ANSI, ASME, and other related standards
• This position will be responsible for reviewing drawings for formatting errors and working with the engineering team to ensure a high level of quality in the design data
• This position will also be responsible for reviewing change documentation and its related incorporations for completeness and correctness
• This position will help develop a set of common Design Standards that meets our Customers and Program requirements
• This position will be expected, at times, to be involved with the drawing creation and subsequent Production review processes

Basic Qualifications:

• Familiarity with SAE AS50881 and ANSI/ASME Y14.100 or related design and drafting standards
• CATIA V5 experience
• Familiarity with Change Documentation process and all related requirements to this process, Microsoft office suite (Word, Excel, PowerPoint)

Preferred Qualifications:

• Teamcenter or similar PDM/PLM software tool
• Experience working in an aerospace environment with exposure to or interface with DoD customers
• AutoCAD or other 2D drafting program

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41422
Job Location: Lexington, KY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/07/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Data Entry Operators - Orlando, FL

Description:
STS AeroStaff Services is hiring Aircraft Data Entry Operators in Orlando, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Maintains aircraft and engine logbooks and associated records
• Proficient performing all operator, data entry and retrieval functions associated with aircraft recordkeeping
• Performs networking functions between individual stations, including analysis and correction of errors caused by software, hardware or data entry
• Transmits and receives data via floppy disk, modem and other electronic means
• Extracts data, formulates and interprets management reports, creates archives, backups, and data saves in support of Station Aircraft Maintenance operations
• Performs a wide range of clerical and administrative duties related to aircraft maintenance, such as preparing reports and correspondence, filing and typing, performing data base and systems analysis
• Performs requirements in accordance with the procedures established in by the customer

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39849
Job Location: Orlando, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/07/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Kitting Technicians - Atlanta, GA

Description:
STS AeroStaff Services now offers Aircraft Kitting Technician jobs in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Under the direction of the Logistics Supervisor, the Kitting Clerk will assemble Aircraft Parts and interior Integration kits using released engineering design data and parts lists.

Job Duties:

• Read and understand released engineering data to include parts lists, drawings, test plans and service bulletins
• Maintain correct revision level of manufactured parts and parts lists
• Ensure parts and installation kits are properly identified and labeled
• Ensure proper certification paperwork is maintained with parts throughout kitting process
• Perform work in a neat and organized manner within estimated or budgeted hours while maintaining high standards of quality
• Operate necessary equipment for the packaging of parts and kits
• Complete all required paperwork for kitting and certification
• Safely operate forklifts (sit down and standup), pallet jacks and hand trucks
• Perform all other duties assigned by Logistics Supervisor or Supply Chain Planning Manager
• Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs in job turnovers
• Documents actions by completing production and quality logs
• Updates job knowledge by participating in educational opportunities (offsite / off-shift training) and continuous self-improvement through trade publications
• Accomplishes organization goals by accepting ownership for accomplishing new and different requests (cross training), exploring opportunities to add value to job accomplishments
• Comply with lean manufacturing principles and work with leads and supervisors to explore and implement best practices in the manufacturing process
• Maintains safe operations by adhering to safety procedures and regulations

Qualifications:

• High school diploma or equivalent, completion of vocational training or an apprenticeship will be an asset
• Experience in performing Kitting in a manufacturing type of environment preferred
• Familiarity with STC, Conformity, and PMA part requirements preferred
• Able to use manual hand tools (i.e. hammer, drill, pry bar, etc.)
• Previous forklift experience or the ability to learn how to operate forklifts
• Must be able to read and understand released engineering data, parts lists, drawings, test plans and service bulletins
• Must be a self-starter requiring minimum supervision and able to perform job assignments with a very high degree of accuracy
• Should have knowledge of typical PC/business software applications (i.e. Word, Excel and Internet)
• Must have excellent interpersonal skills and be able to interact with a wide variety or people
• Must be able to work in a fast paced environment and maintain a high quality of work
• Must be able to work flexible shifts to include overtime and weekends (as needed) in order to meet customer schedules and needs of other departments
• High level of manual dexterity and detail orientation
• Able to manufacture aircraft interior parts and assemblies in accordance with released data
• Good oral and written communication skills; able to read, comprehend and create written and verbal instructions in the English language

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41354
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 01/31/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Records Specialists - Dallas, TX

Description:
STS AeroStaff Services is hiring Aircraft Records Specialists in Dallas, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Schedule:

Wednesday-Saturday, 6:00am-4:00pm

Job Summary:

Responsible for processing the retention of all Maintenance Records into the imaging system and ensures the documents are maintained permanently in accordance with procedures and FAA regulations.

Job Duties:

• Accomplishes imaging needs and requirements (eg. SIS scanning/indexing/verifying)
• Assists research Teams (such as AD Compliance, Mx Programs, Mx Program Compliance, and Engineering) with locating documents
• Works as liaison to outsourced vendors and facilities regarding package/paperwork reciepts and/or uploading for FTP retrieval
• Performs data entry into databases (eg. engine oil consumption, engine trends, work package lifecycle, overtime info)
• Ensures maintenance packages and paperwork are received into Records and distributed to appropriate personnel
• Responsible for Records mail pick-up and basket distribution duties
• Audits maintenance packages of work accomplished, log page discrepancies and deferred maintenance items. (eg. MCAUDIT)
• Reviews documentation of maintenance accomplished for proper sign-off
• Reports all errors to CASS as appropriate
• Performs the removal and installation of on condition and hard time components
• Assists in monitoring correction requests, Records email box and other problem issues for Tech Ops
• Works on special projects for other Teams when necessary

Qualifications:

• High School Diploma required; Associates or Bachelor’s degree preferred
• Minimum 6 months’ experience in aviation records preferred
• Prior work experience or training performing document imaging preferred
• Must be able to work from seated and standing positions for long periods of time
• Must be able to read review, and accurately apply and categorize technical documents, understand office procedures and follow instructions
• Must be able to operate document imaging equipment and use a computer tools
• Must be able to work under tight time constraints to accomplish daily assignments and projects
• Must be able to utilize Microsoft Office software; specifically Excel and Outlook
• Must be able to accurately and efficiently review and enter data into computerized systems
• Strong desire and ability to work in a technically oriented environment
• Must possess good organizational and communication skills
• Must have the ability to manage interruptions, prioritize responsibilities and work in a fast paced environment
• Must have a positive attitude and be a Team player
• Must maintain the confidentiality of proprietary information handled in daily tasks
• Must be able to work a flexible schedule with day, night and weekend duty and holiday work
• Prior work experience and/or familiarity with aircraft maintenance terms and documentation preferred
• Excellent organization skills and time management
• Must work under tight time constraints to accomplish assignments and projects

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41501
Job Location: Dallas, TX
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/13/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Records Specialists - Houston, TX

Description:
STS AeroStaff Services now offers Aircraft Records Specialist jobs in Houston, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Purpose:

The Aircraft Records Specialist is responsible for data entry, audits, and updates of daily production documentation by the maintenance organization.

Job Duties:

• Audits maintenance packages of work accomplished, log page discrepancies and deferred maintenance items
• Reviews documentation of maintenance accomplished for accuracy, proper sign-off and compliance
• Performs the data entry in the Maintenance Activity Communication History module of the maintenance computer system
• Performs the removal and installation of components in the Component Control System module of the maintenance computer system
• Reviews and Updates documentation pertaining to AD's and modification compliance in the Modification Control System module of the maintenance computer system
• Ensures all scheduled maintenance has been audited for proper sign-off and updated in the system prior to the release of the aircraft
• Audit vendor airworthiness certification and enter work accomplished into the maintenance computer system
• Maintains aircraft and engine flight hours and cycles utilization reports, master log reports, and engine oil consumption reports
• Maintains historical records in the mainframe database for components, maintenance activity and communication and modification compliance
• Responsible for the retention of all aircraft maintenance records into an imaging system and ensure the documents are maintained permanently in accordance with standards and FAA regulations
• Processes engine, APU, and gear assembly build ups and teardowns documentation from vendor and shop locations
• Produces Aircraft Records specification reports when requested from outside parties
• Monitor correction requests
• Interact with Planning, Records, Reliability, Production and Engineering departments
• Responsible for verifying the accuracy of maintenance databases through various reports
• Submits recommendations for process improvements and assists Records Analyst in training new Employees

Qualifications:

• High school diploma or equivalency required; minimum two year college is preferred
• Minimum two years’ in the aviation industry (Records, Planning, Reliability, or Production) is preferred
• Must be able to master PC software packages including Microsoft Excel/Word/Access applications
• Experience working with an imaging system software is a plus
• Experience working with the Maxi-Merlin main frame application is a plus
• Ability to learn to read technical documents, follow instructions, and understand office procedures
• Must have vision ability sufficient to view and read computer monitor on a frequent basis
• Must be able to lift 30 pounds and drive on secured airport property
• Must be able to comply with Company attendance standards as described in established guidelines
• Must meet confidentiality expectations as to confidential, proprietary and sensitive Company information
• Must have a valid driver's license at time of hire and be comfortable driving at night
• Candidate must be able to type 40 WPM, detailed oriented, self-starter, dependable, able to multi task, work in a close environment with a Team and able to work productively with little supervision

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41218
Job Location: Houston, TX
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/05/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Applications Engineer - Level 3

Description:
Location: Lexington, KY
Rate: $55.00 - $65.00/HR
Duration: 9 month contract
Shift: 1st Shift
Overtime: Exempt

*****MUST have an Active Secret Clearance or to have had one with the last 2 years*****

Job Description:
- This is a mid-to-advanced career position (5 to 15 years of experience) for a SharePoint Administrator on a Department of Defense (.mil) network.
- The SharePoint Admin will be responsible for managing the daily operations and milestone events (e.g. troubleshooting, patches, data backup, and upgrades) for the collaboration tool at the Special Operations Forces Support Activity (SOFSA) contract in Lexington, Kentucky.
- She / he will be part of the IT department and will work with the user community (mainly back office operations such as contracts administration, quality assurance, and procurement) to ensure the software meets the needs of the overall contract.
- This includes, but is not limited to, configuration settings, and workflow / report design and support.
- A primary responsibility will be to upgrade the current SharePoint instance from 2010 to 2013.
- This is not a remote position.
- Personal Portable Electronic Devices (e.g. cell phones) are not allowed in the facility.

Skill/Experience/Education
Mandatory:
*****MUST have an Active Secret Clearance or to have had one with the last 2 years*****
- 5+ years of experience with SharePoint 2010 and 2013 Administration (Server Side)
- 5+ years of experience with PowerShell Scripting
- Security + certification
- MCSE certification

Desired:
- Nintex Workflow, Active Directory, Basic SQL Experience, Windows Administration, SQL Server Reporting Services, Internet Information Services
 
Job Number: 8599
Job Location: Lexington, KY
Rate: $55.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 9 mos
Input Date: 02/12/2018
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Associate Program Manager

Description:
SUMMARY
Supports Program Manager with all aspects of Program Management.

ESSENTIAL DUTIES AND RESPONSIBILITIES
• Comprehends contractual obligations and statement of work for assigned program(s) and provides guidance based on these documents to other program team members as required.
• Participates in program planning and documenting.
• Develops and maintains status and visibility tools.
• Assists with oversight and coordination of vendor activities and communication.
• Comprehends and monitors assigned aspects of a program and report status.
• Coordinates or assists with coordinating program reviews and meetings.
• Coordinates program related travel as required.
• Organizes and facilitates communications between the customer and appropriate GTI personnel.
• Provides leadership and coordination of team-based solutions to program issues.
• Develops methods and procedures for managing programs.
• Assists or takes primary role in developing or administering program change orders.
• Assists with part procurement and status as required.
• Assists in maintaining program financial health tools.
• Participates in risk identification and risk mitigation activities.
• Assists with final inspection (closing process) as required.
• Responsible for ensuring that assigned small-scale projects progress on schedule within budget and meets or exceeds minimum quality standards; this may include post delivery support.
• Assists in preparing and maintaining departmental policies, procedures and reporting.
• Maintains regular attendance including being at work, being on time to work and working full shifts.
• Other duties as assigned.

COMPETENCIES
To perform the job successfully, an individual should demonstrate the following competencies:

CORE COMPETENCIES
• Adaptability - Adapts to changes in the work environment, manages competing demands, and accepts constructive criticism/feedback and changes approach or method to best fit the situation.
• Communications - Expresses ideas and thoughts effectively in verbal and written form, exhibits good listening and comprehension, keeps others informed and uses appropriate communication methods.
• Dependability - Responds to requests for service and assistance, follows instruction and responds to management direction, takes responsibility for own actions and doing the best job possible, keeps commitments, and maintains reliable attendance.
• Initiative - Sets and achieves challenging goals, demonstrates persistence and overcomes obstacles, measures self against standard of excellence, recognizes and acts on opportunities, and takes calculated risks to accomplish goals.
• Teamwork - Balances team and individual responsibilities, exhibits objectivity and openness to others' views, gives and welcomes feedback, contributes to building a positive team spirit, and puts success of team above own interests.
• Work Quality - Demonstrates accuracy and thoroughness, displays commitment to excellence, looks for ways to improve and promote quality, applies feedback to improve performance, and monitors own work to ensure quality.

JOB CORE COMPETENCIES
• Customer Service – Displays courtesy and sensitivity, manages difficult or emotional customer situations, meets commitments, responds promptly to customer needs, and solicits customer feedback to improve service.
• Planning & Organization – Prioritizes and plans work activities, uses time efficiently, plans for additional resources, integrates changes smoothly, sets goals and objectives, and works in an organized manner.
• Productivity – Meets productivity standards, completes work in timely manner, strives to increase productivity, works quickly and achieves established goals.
• Relationship Building –Builds rapport up, down, and across the organization, establishes collaborative relationships to achieve objectives, seeks win-win solutions to conflict, develops network of professional contacts, and displays empathy and tolerate diverse viewpoints.

SUMMARY OF EDUCATION, EXPERIENCE & CERTIFICATION
Bachelor's degree (B. S.) in Engineering or a related discipline from a four-year college or university and a minimum of four years related experience and/or training, or equivalent combination of education and experience. Aerospace background and aircraft interior industry experience preferred.

Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

REQUIRED KNOWLEDGE, SKILLS & ABILITIES
• Ability to work well independently and cross-functionally as part of an established and growing team.
• Demonstrates the interest and ability to grow within the program management function.
• Displays sound judgment, problem-solving skills and ability to function independently to accomplish tasks with minimal supervision.
• Strong communication, time-management and problem-solving skills.
• Ability to read, analyze and interpret the most complex documents.
• Ability to respond effectively to the most sensitive inquiries or complaints.
• Ability to write speeches and articles using original or innovative techniques or style.
• Ability to make effective and persuasive speeches and presentations on controversial or complex topics to top management, public groups and/or boards of directors.
• Ability to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems.
• Ability to deal with nonverbal symbolism (formulas, scientific equations, graphs, etc.) in its most difficult phases.
• Ability to deal with a variety of abstract and concrete variables.
• Demonstrated experience with Accounting, Database and Project Management software.
• Proficient in Microsoft Office applications with advanced Excel skills.
• Ability to sit for extended periods of time, use hands to lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds, and have close/color vision ability to adjust focus.
• Ability to travel as required.
• Ability to work outside of core business hours as required.
 
Job Number: 18-811
Job Location: Northwest
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 02/08/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Automation Software Developers

Description:
OOP-object oriented programming, high speed
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: ccastro@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Quality Inspectors - Spokane, WA

Description:
STS AeroStaff Services is now hiring Aviation Quality Inspectors in Spokane, Washington.

We offer a competitive salary, amazing employee benefits and an excellent commission’s package alongside the opportunity to work with some truly incredible people.

Job Summary:

This Role will be tasked to utilize their seasoned skills to be effective, efficient and productive on a daily basis. Quality Inspectors will be expected to work as a cohesive unit to manage all quality control aspects of aircraft maintenance, aircraft painting, material and tooling acquisition, and administration of maintenance and training records, as well as assist in creating an atmosphere of communication, collaboration and teamwork.

Job Duties:

• Continuing Education of CFRs such as Part 145, 121, 65 and Part 43
• Coordination of External Audit Inspections, Reports, Corrective Actions, and Responses
• Coordination of Customer Inspector Training and Certification Requirements
• Organizational Skills to Function Properly in a Fast Paced Industrial Environment
• Qualification Validation and Appointment for Interim Quality Manager to Support Organization During Extended Period Absences
• Ensure that Work Orders are Completed Per Established Inspection Procedures and Sign Air Worthiness Releases
• Ensure that Inspection Items are Compliant and Complete
• Ensure that Parts Tags are Filled Out and Processed Properly with Proper Tag Attached
• Support Records Supervisor with Controlling and Auditing Work Orders
• Perform Receiving, Preliminary, In-Process, Hidden Damage and Final Inspections
• Provide Training (Initial and Recurrent) to Site Employees
• Perform Quality Assurance Audits and Routine Surveillance of In-Process Work
• Manage the Internal Quality Audit Program
• Review Inspection Forms and Paperwork for Proper Completion
• Serve as the Alternate Repair Station Point of Contact for the FAA
• Survey and Approve Potential Materials and Service Vendors

At STS AeroStaff Services, we treat our employees like family. We nurture and guide their careers down the path of success and promise to work with them every step of the way to ensure prolonged professional happiness and complete job satisfaction.

Qualifications:

• High School Diploma or GED (required)
• Bachelor’s Degree in Industrial Engineering, Operational Management, General Business, Etc. (preferred)
• Experience in Lieu of College Education (consideration)
• Minimum of 5 Years’ Experience in the Aviation Quality/Inspection Area with a Large Organization
• Ability to Wear Full Face Respirators, Coveralls and Fall Restraint Equipment
• Ability to Pass a DOT Drug and Alcohol Test
• Ability to Pass a 10 Year Background Check and Obtain TSA Airport Badge
• Ability to Work a Variety of Shifts Based on Company and Client Needs
• Current FAA A&P Certificate (validation verified)
• Current Software Skills such as MS Office Suite, Outlook, SharePoint, etc.
• Experience Designing, Developing, Implementing and Training Program Related Items
• Experience with Lean Production, TQM, and/or Six Sigma Work Environments
• Ability to Communicate Effectively with a Variety of Methods (Verbal, Written, Presentation, Etc.)
• Achieve Compliance Goals: 1. Customer Pick-Up Rate of 15/Aircraft; 2. Customer Satisfaction Rate of 4.5 for Quality Category; 3. Indirect Labor Hours of 110% or Less; 4. Corrective Action Completion Rate of 95% On-Time
• Manage the Administration of Manuals: Repair Station, Quality Control, Repair Station Training, Operations Specifications and the Quality Management System
• Creation of Standardized Reporting of Service Risks, Major Repairs and Unapproved Parts in Accordance with Applicable Regulations
• Evaluation of Inspector and Designated Inspector Qualifications and Authorization to Perform Appropriate Inspection
• Ensure that all Aircraft Maintenance Meets FAA, Customer, Company and/or Manufacturer Specifications

Not only is STS AeroStaff Services widely considered one of the premiere staffing organizations in the country, we’ve also been honored with multiple awards recognizing us as innovators and leaders throughout the recruiting industry.

If you or someone you know is interested in learning more, we encourage you to share this post across your social media channels or simply apply on this page. For questions, please call 1-877-707-5767.
 
Job Number: 41370
Job Location: Spokane, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/01/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
BIT Engineer (Built in Test Engineer)/ DoD Clearance Required

Description:
Job Title: BIT Engineer (Built in Test Engineer)/ DoD Clearance Required
Location: Compton, CA
Duration: 12 months
Pay Rate: $125/ hour

**DoD Secret Clearance is required**

Description:
The Software Engineering Center is seeking a Built in Test Engineer to work on next gen Tactical Airborne Sensor System.

Job Description:
Applicant needs to have experience with Real Time Embedded Systems in regard to Built-In-Test (BIT). The BIT suite of applications will need to provide confidence for correct operation of each module in various subsystems.

Required Skills:
• Startup-Up BIT (SBIT): Comprehensive testing of hardware and functionality during system startup. Needs to identify subsystem and module in the case of failure.
• Initiated BIT (IBIT): Manual BIT (intrusive). Halts current application and runs comprehensive tests and failure identification on system/module.
• Periodic BIT (PBIT): Non-intrusive tests that can be run while other applications are active.

Desired Skills:
• Device Driver
• Board Support Package
• Ability to use a logic analyzer and/or oscilloscope
• Knowledge of EO/IR and RADAR systems

Required Education:
• B.S. Engineering Degree in either Computer Science or Electrical Engineering

Additional Job Details:
• DoD Secret Clearance is required
 
Job Number: 382771
Job Location: Compton, CA
Rate: $125/ hour
Per Diem: none
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 02/07/2018
Firm Name: CDI CORPORATION
Attention: Jason Greer
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Business Process Consultant

Description:
Our client, the single largest financial and administrative healthcare network in the United States, is a solutions-driven healthcare technology and services leader. With over 30 years in the industry, our client is successfully connecting all private and government payers, claim-submitting providers and pharmacies in a hybrid cloud-based, user-centric and secure infrastructure environment. In addition to moving data from point A to point B, our client translates, analyzes and helps mine huge virtual silos of information to improve the business of healthcare at all levels.

Business Process Consultant
Nashville, TN
2018-5315

Join our IT Transition Program Management team to support migrating IT Applications and Infrastructure into the company. You will oversee migration and streamlining of new hire onboarding processes (systems access, equipment provisioning, facilities management) into the new organization with scalable processes and procedures. You will not only focus on project management, but process improvement and will create a systemic process flow across multiple functions.

Responsibilities:
• Evaluate business requirements and system usage in order to make strategic recommendations.
• Develop and drive project plans with the goal of ensuring maximum client success.
• Create and examine process flows across multiple functions and make recommendations for process improvement.
• Be an adaptable, independent contributor, and provide overall quality control to all projects.
• Leads, through (agile/scrum/waterfall) methodologies, collaborative efforts through all phases of the project, including requirements gathering and tactical user experience activities.
• Facilitate the definition of project objectives, goals, tasks, and resource requirements.
• Partner with the project client/owner/sponsor and all stakeholders to create and implement appropriate and efficient solutions based on business objectives, ensuring technical feasibility.
• Conduct process reviews and make recommendations to streamline and create efficiency/scale in current state processes.
• Provide project management for project activities to ensure that the project is completed on time, within budget and scope.
• Provide project management for scheduling, tracking, issue management, risk management, change management, and status reporting.
• Provide consultation, guidance, and support to teams to ensure alignment and a shared understanding of the SDLC best practices.
• Facilitate project team meetings, manage agendas and meeting recaps to ensure all project tasks and goals are being accomplished as expected.

Qualifications:
• PMP/CSM Certified and process improvement expertise (such as Six Sigma training) preferred
• Excellent time management skills and able to prioritize/self-direct as needed.
• Experience with SaaS models.
• Proven track record of delivering projects on time and within agreed upon scope.
• Able to work on a team and lead others as required completing projects.
• Excellent verbal, written and interpersonal communication skills.
• A quick study who can work under minimal supervision.
• Strong project management skills and able to prioritize activities.
• Able to build strong relationships with internal team members across geographically dispersed teams; offshore experience a plus.
• Independently motivated with proven ability to follow through on initiatives.
• Highly engaging and collaborative style in working cross-functionally.
• Able to forecast and management resource allocation.
• Experience managing multiple concurrent projects with diverse working groups
• Experience with systems, databases and virtual infrastructure
• Strong analytical and decision-making skills
• Working knowledge of the components of the software release process, including issues of development, documentation, packaging and quality assurance
• Proficient in MS Project, SharePoint, MS Visio, MS Power Point, MS Word, and MS Excel
• Able to work in a fast paced, high pressure environment while remaining calm, cool and collected
• Research capabilities, writing experience, and knowledge of IT security & compliance requirements a plus

*Applicants must be currently authorized to work in the United States for any employer. No sponsorship is available for this position.

Education and Experience:
• Bachelor’s degree
• 5+ years (preferred) of experience with consulting, project management and SDLC

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5315
Job Location: Nashville, TN
Duration: 6 Months
Input Date: 02/01/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Bradley Davis
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Business System Analyst

Description:
We are seeking for a Business System Analyst for this National company located in Bend, Oregon.

This role will leverage appropriate Business Systems Analysis tools/solutions based on the standards/best practices of our client. This position requires minimal supervision delivering outcomes, significant breadth/depth of job specific knowledge and significant level of service delivery, professionalism, and communication.

The Business Systems Analyst (BSA) and/or Technical BA is responsible for:
Performing application process definition
Technical application modeling
Requirements gathering and analysis capabilities to help identify and understand how software and hardware systems are currently fulfilling needs and/or gaps
Participation in working groups and/or as part of PMO led projects
Project
Completing the IT application and software model as it relates to the supply chain function.
Socialize model and fit/gap recommendations where application/hardware support should be handled - i.e. changes to organization support and roles/responsibilities to be successful
Aid in any transition of Supply Chain applications/hardware support into the IDS organization
Establish a Technical supply chain roadmap and strategic plan
 
Job Location: Bend, ORE
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 01/31/2018
Last Updated: 03/03/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

C# Interface Software Engineer- Top Secret Clearance, Clifton, NJ 07014

Description:
PDS Tech, Inc. is seeing Software Engineers with Top Secret DoD clearances in Clifton, NJ.  07014  Please send resume to Elisa Petersen at epetersen@pdstech.com or call at 316-448-0890.

Provide engineering services in command and control applications including requirement analysis, design, development, test, and sustainment for cutting-edge communications and information processing software systems as directed.  Provide monthly status reports of activities supported in subcontractor format. Travel as required.

Labor skills requirements:
  • TS/SCI clearance, active CI polygraph preferred
  • Bachelor’s degree in Computer Engineering, Computer Science, or related field with a minimum of 5 years of applicable experience
  • Minimum 3 years of direct software development experience with

(1) User interface software applications in C#, WPF, WCF, and Python working with Visual Studio .Net and the Windows application domain OR
 
  • Experience with various software architectures and platforms
  • Thorough understanding of software engineering principles, processes, and industry best practices with the ability to apply them in daily work
  • Ability to read, analyze and interpret requirements and common government specifications
  • Skilled in independently balancing a fair work load, managing priorities, maintaining a commitment to quality standards, overcoming obstacles, and achieving results
  • Experience implementing software applications involving the government customer
  • Organizational skills to work with a variety of people in different disciplines, working from multiple locations on tasks involving rapidly changing information
  • Strong communications skills both written and oral as well as presentation skills to communicate information effectively to both internal and external customers, managers and technical staff

Engineering support required for a six-month period of performance after receipt of order (ARO) with option to extend in 6-month increments.
 
 

 
Job Number: 1810081296
Job Location: Clifton, NJ
Duration: 6 months
Input Date: 02/12/2018
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dkuYAAQ&URLSource=cjhunter

C++ Embedded Systems Engineer - Top Secret Clearance, Clifton, NJ 07014

Description:
PDS Tech, Inc. is seeing Software Engineers with Top Secret DoD clearances in Clifton, NJ.  Please send resume to Elisa Petersen at epetersen@pdstech.com or call 316-448-0890.

Provide engineering services in command and control applications including requirement analysis, design, development, test, and sustainment for cutting-edge communications and information processing software systems as directed.  Provide monthly status reports of activities supported in subcontractor format. Travel as required.

Labor skills requirements:
  • TS/SCI clearance, active CI polygraph preferred
  • Bachelor’s degree in Computer Engineering, Computer Science, or related field with a minimum of 5 years of applicable experience
  • Minimum 3 years of direct software development experience with


(1.) Embedded systems in C++ working with Linux/Ubuntu operating systems. RTOS experience is preferred.

  • Experience with various software architectures and platforms
  • Thorough understanding of software engineering principles, processes, and industry best practices with the ability to apply them in daily work
  • Ability to read, analyze and interpret requirements and common government specifications
  • Skilled in independently balancing a fair work load, managing priorities, maintaining a commitment to quality standards, overcoming obstacles, and achieving results
  • Experience implementing software applications involving the government customer
  • Organizational skills to work with a variety of people in different disciplines, working from multiple locations on tasks involving rapidly changing information
  • Strong communications skills both written and oral as well as presentation skills to communicate information effectively to both internal and external customers, managers and technical staff

Engineering support required for a six-month period of performance after receipt of order (ARO) with option to extend in 6-month increments.
 
 

 
Job Number: 1810081277
Job Location: Clifton, NJ
Duration: 6 months
Input Date: 02/12/2018
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dkshAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAE Engineer

Description:
Description:


BS Degree in ME/AERO. Minimum of 6+ years of industry experience as CAE analyst and specific solver software usage depending on department specialty area. Minimum of 5 years of experience using pre-processor / post-processor tools (Hyperworks) for complex vehicle system level CAE model construction, visualization, and analysis. Related advanced degree may be substituted for 2 years of experience.

Requirements for a CAE Analyst:

- Strong vehicle dynamics and chassis control background (education and project experiences) with focus on handling, traction, stability, braking control systems.
- Must be proficient in popular vehicle dynamics software such as CarSim, control simulation tools such as MATLAB/Simulink as well as rapid control prototyping platforms such as dSPACE RTI/ControlDesk, and be able to create and debug models/codes including chassis control logic algorithms.
- Integrate controller models into vehicle simulation platforms for SIL and HIL bench setups and applications.
- Validate accuracy of simulation models by comparing to test data.
- Predict handling, braking and chassis control system responses, assess control system fail-safe/ISO26262 characteristics using SIL, HIL and DIL setups, and develop countermeasure to get desired performance while guaranteeing robustness.
- Must be able to develop modeling and simulation methods, produce customer-oriented results and explain them from root cause standpoint.
- Must be able to work independently, and be willing to deal with fast changing environment.
- Must be able to maintain schedule and stay focused on priorities.
- Min. Bachelor Degree in Engineering and more than 2 years vehicle dynamics modeling/simulation experience.

- Some experience in any of the following vehicle dynamics modeling/control systems is a plus: TargetLink, SIMPACK, ADAMS/Car, VSM, CarMaker
 
Job Number: NSR10008CAE
Job Location: Columbus Area, OH
Rate: Open
Per Diem: No
Overtime: Straight
Duration: LT
Start Date: ASAP
Input Date: 02/19/2018
Firm Name: NSR GROUP
Attention: Mariko Akiyama
Address: 655 METRO PL S STE 600-044
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr-j.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CMM Inspector

Description:
Major purpose:
Programs, sets up and operates Coordinate Measuring Machines (CMM) in order to make complex, precise measurements of the requisite materials and parts. The individual performs visual and dimensional inspection on parts to determine their accuracy to parts specifications. Training and mentors other CMM operators in CMM inspection techniques.

Essential Duties and Responsibilities:
• Sets up and operates CMM in order to make complex, precise measurements of parts.
• Reads and interprets specifications, blueprints, and models for product tolerances and dimensions.
• Verified conformance of parts to specifications and blueprints with respect to measurements.
• Provide manufacturing with 1st piece and in-process data to ensure parts conformance.
• Interprets measurement output data and graphic data.
• Work with engineering, machinists and quality assurance personnel to trouble shoot, research and solve technical problems.

Education/Experience:
• Technical certificate in related field required, Associate degree preferred.
• Must have a minimum of 5+ years’ experience in a manufacturing – aerospace environment.
• Must have good communications skills, written/verbal, with all levels of personnel.
• Must have excellent computer skills.

Special Skills:
• Proficient in coordinate measuring machine techniques and application.
• Must have knowledge and ability to operate CMM’s using PC-DMIS software.
• Knowledge and familiarity with Polyworks and/or Verisurf is also preferred.
• Ability to read, understand and interpret blueprints and other technical data including geometric dimensioning and tolerances.
• Proficient in AS9102 FAI reporting.
• Net-Inspect experience beneficial.
• Proficient in use of precision measuring tools.
• Strong mathematical and mechanical skills.
• Working knowledge of manufacturing processes, CNC equipment, quality standards and rework processes.
• Experience with quality systems and their application.
• Must have problem solving skills and experience.
 
Job Number: 40-002
Job Location: Crestview, FL
Rate: $30 - $35
Per Diem: Yes
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 01/25/2018
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer

Description:
Job Title: Numerical Control Programmer

Location: St. Louis, MO

Duration: Long term 24+ months

Pay Rate: $60/ hour

Job Description:

To define, plan, design and refine fixtures, data and processes necessary to facilitate and control the manufacture of products in the St. Louis facilities.
Plans, creates, verifies and revises machine control data and documentation that direct the operation for multi-axis numerically controlled machines and robots required to manufacture and inspect complex parts and tools.
Provides numerical control, machining and programming technical expertise to cross-functional engineering and manufacturing team.
Establishes technical requirements for manufacturing and producibility.
Defines and designs complex fixtures used to manufacture or inspect parts.
Plans, guides and facilitates the development and integration of new machining techniques and manufacturing methods or inspection techniques, processes and software.
Continuously improves the quality of manufacturing processes and supplier-provided work

Experience and Qualifications:

Over four (4) years of recent N/C Programming experience, using CAD/CAM systems to analyze and modify part models and produce programs required.
Aerospace manufacturing experience required.
3, 4, and 5-axis NC programming for milling parts.
Structure parts (e.g. spars, ribs, skins, bulkheads and nacelle fittings)
High speed aluminum and /or titanium machining experience.
Vericut 7.XXX simulation minimum experience.
CATIA V5 R2014 minimum experience.
Familiarity with Windows environments and office tools.
Machinist experience preferred.

Education:

Associate’s Degree in N/C Programming, Manufacturing Technology or equivalent preferred. Bachelor’s Degree in Manufacturing Technology or related field preferred.
Combination of education and experience may be considered in lieu of degree.

Physical Demands:

Typical machine shop work environment and physical expectations
 
Job Number: 382791
Job Location: St Louis, MO
Rate: $60/ hour
Per Diem: none
Overtime: yes
Duration: Long Term/ ongoing
Start Date: ASAP
Input Date: 02/07/2018
Last Updated: 03/02/2018
Firm Name: CDI CORPORATION
Attention: Jason Greer
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer IV

Description:
CNC Programmer IV

Location: Canoga Park, CA
Rate: DOE
Duration: 1 year contract
Shift: 1st Shift

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Phone AND In-Person interviews are required. Candidates must be able to attend an in-person interview at their own expense **

Duties:
Must show this experience on resume:
** Siemens NX9-NX11 NC Programming experience is required **
** DMU Mori with Siemens 840D Experience; Specifically DMU80 FD and DMU65 **
** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

50% - The NC Programmer is responsible for writing new CNC programs, setup instructions, estimating and making changes to existing CNC programs. Will develop, write and maintain NC programs for complex aerospace components using engineering models, drawings and specifications to support a zero defects machining operations environment. Selects program routines for the most efficient machining methods for each part. Will be involved in the prove out of new technology, first article inspection, fixture design, and day to day programming using Siemens NX9-NX11 CAM.
10% - Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.
5% - Make proper cutting tool selections, taking into consideration such factors as materials, speeds, type of cutters, feeds and control system imitations.
10% - Use machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and 100% defect-free FTT machining processes.
10% - Modify existing parts programs for engineering changes or program improvements.
5% - Work closely with Machinists, Quality, Engineering, Management and other team members.
5% - Develop, write and maintain type II probe and logic macros to perform on machine touch probe measuring, fixture updates, cutter offset updates, and part feature data collection.
5% - Participate in knowledge sharing and cross training activity within the NC programming group.

Skills:
** Siemens NX9-NX11 NC Programming experience is required **
** DMU Mori with Siemens 840D Experience; Specifically DMU80 FD and DMU65 **
** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

Preferred Requirements:
-NX Post Builder expertise
-NX Machine tool Configurator expertise
-Vericut Machine Builder expertise
-Fanuc custom macro programming expertise
-Siemens 840D macro programming expertise

Education:
- Bachelors degree or equivalent experience.
 
Job Number: 7811
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 01/04/2018
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer IV CA (local only)

Description:
Job Title: CNC Programmer IV
Keywords:
Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **





Required (Please screen for these three items and make sure the experience is accurately reflected on resumes):



** Siemens NX9-NX11 NC Programming experience is required **

** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **

** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **



** Candidates above the maximum bill rate will be considered. Please make sure that they are submitted at rates commensurate with their qualificaitons **



** Phone AND In-Person interviews are required. Candidates must be able to attend an in-person interview at their own expense **

50% - The NC Programmer is responsible for writing new CNC programs, setup instructions, estimating and making changes to existing CNC programs. Will develop, write and maintain NC programs for complex aerospace components using engineering models, drawings and specifications to support a zero defects machining operations environment. Selects program routines for the most efficient machining methods for each part. Will be involved in the prove out of new technology, first article inspection, fixture design, and day to day programming using Siemens NX9-NX11 CAM.
10% - Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.
5% - Make proper cutting tool selections, taking into consideration such factors as materials, speeds, type of cutters, feeds and control system imitations.
10% - Use machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and 100% defect-free FTT machining processes.
10% - Modify existing parts programs for engineering changes or program improvements.
5% - Work closely with Machinists, Quality, Engineering, Management and other team members.
5% - Develop, write and maintain type II probe and logic macros to perform on machine touch probe measuring, fixture updates, cutter offset updates, and part feature data collection.
5% - Participate in knowledge sharing and cross training activity within the NC programming group.








Skills:
Required (Please screen for these three items and make sure the experience is accurately reflected on resumes):



** Siemens NX9-NX11 NC Programming experience is required **



** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **



** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **



Preferred Requirements:

-NX Post Builder expertise

-NX Machine tool Configurator expertise

-Vericut Machine Builder expertise

-Fanuc custom macro programming expertise

-Siemens 840D macro programming expertise

Education:
Bachelors degree or equivalant experience.

Skills:
Required
SIEMENS NC PROGRAMMING LATHE

State/Province: California
City/Town: Canoga Park

Start Date: 01/29/2018 Hours Per Week: 40.00
Est. End Date: 01/29/2019 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7332297
Job Location: Canoga Park, CA
Rate: 46/hr
Duration: 12 month contract
Input Date: 03/06/2018
Last Updated: 03/19/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmers - Atlanta, GA

Description:
STS AeroStaff Services now offers CNC Programmer jobs in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Under the direction of production management, the CNC Programmer will generate CAM code programs for a variety of CNC machines, Point drawings, and machine set ups. The programs generated will produce or repair precision aircraft parts using multiple types of CNC equipment, accurate measurement tools and portable coordinate measuring equipment.

Job Duties:

• Plans machining operation by generating CNC G&M code programs/point drawings and machine set-up sheets by studying work orders, engineering orthographic drawings, engineering work instructions, materials, specifications, reference planes, locations of surfaces, and machining parameters interpreting geometric Imperial, SI dimensions base on ANSI and ISO standards and tolerances (GD&T)
• Use CAD/CAM software to program mills and lathes by entering machine code and operation instructions, including zero and reference points, setting tool registers and offsets, compensation, conditional switches, and calculating requirements including basic math (geometry, and trigonometry)
• Sets-up mills, lathes and grinders by installing and adjusting three- and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers. Indicating vices, machining fixtures and tramming machine heads.
• Verifies settings and program code by measuring positions, first-run part, and sample work pieces adhering to standards
• Maintains part specifications by observing machining operations
• Verify the feed and speed of machines during the machining process, taking measurements, detecting program code error and malfunctions
• Troubleshooting processes, adjusting and editing programming parameters
• Sharpening and replacing worn tools
• Adhering to quality assurance procedures and processes specifications
• Maintains equipment by completing instructed preventive maintenance requirements, following manufacturer's and instructions
• Troubleshooting malfunctions and reporting to management for equipment repairs
• Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs in job turnovers
• Documents actions by completing production and quality logs
• Updates job knowledge by participating in educational opportunities (offsite / off-shift training) and continuous self-improvement through trade publications
• Accomplishes organization goals by accepting ownership for accomplishing new and different requests (cross training), exploring opportunities to add value to job accomplishments
• Comply with lean manufacturing principles and work with leads and supervisors to explore and implement best practices in the manufacturing process
• Maintains safe operations by adhering to safety procedures and regulations
• Effectively work with co-workers, engineering and management in problem solving and exploring and implementing best practices in our operations
• Be prepared to cross train and be utilized in other aspects in the production process

Qualifications:

• High school diploma or equivalent, completion of vocational training or an apprenticeship will be an asset
• Proven experience as CNC Programmer and Machinist with formal training setting up and running Mills, Lathes, and Grinders
• Knowledge of CAD/CAM software, CNC G&M Code manual input for machine controls
• Experience in using and/or programming manual, semi-automated or CNC automated tools and machines (lathes, grinders etc.)
• Proficient in reading and interpreting engineering drawings, schematics, engineering orders, and technical manuals
• Able to read and understand Boeing and Airbus process and material specifications
• Knowledge of the properties of metal and other material
• High level of manual dexterity and detail orientation
• Ability to use precision measuring and portable coordinate measuring equipment tools to take accurate measurements
• Able to manufacture aircraft interior parts and assemblies in accordance with released data
• Proficient in math and analytical abilities (to include but not limited to Algebra, Geometry, Trigonometry)
• Good oral and written communication skills; able to read, comprehend and create written and verbal instructions in the English language
• Maintains safe operations by adhering to safety procedures and regulations

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41356
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 01/31/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Civil Engineer

Description:
Civil Engineer

Location: Lake Buena Vista, Florida

Terms: Long Term Contract Employment

The successful candidate will assist the civil engineering team with the evaluation of existing civil utility infrastructure and assist with preparation of H&H analysis associated with the infrastructure. Assistance for civil plan production and environmental analysis/permitting as part of departmental and multidiscipline efforts will also be required. Drawings will be prepared using Autodesk Civil 3D and AutoCAD software. Job requires close collaboration with engineers and architects, as well as clients and stakeholders from a diverse group of business units.

Basic Qualifications:

Experienced Civil Engineer with Environmental Engineering focus.
Proficient knowledge of Autodesk Civil3D, AutoCAD, and Microsoft Office products.
Proficient knowledge of drafting standards, including plan and detail production.
Moderate to proficient knowledge of environmental permitting, hydraulic & hydrologic analysis an modeling, StormCAD, SewerCAD, WaterCAD and ICPR software; knowledge of Bluebeam or other pdf software.
Must be a detail-oriented team player who has the ability to work independent with strong organizational skills and able to work with others in a fast-paced production environment.
5-10 years of experience is required.
Required Education:

Bachelor's Degree.
 
Job Number: 378476
Job Location: Lake Buena Vista, FL
Rate: 40.00
Per Diem: No
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 01/30/2018
Firm Name: CDI CORPORATION
Attention: Kris Douglas
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composites Tooling Engineer / CAD Creo or Solidworks CA

Description:
14307

Title Composites Tooling Engineer
45/hr max

Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We currently have an exciting opportunity for a Composite Tooling Engineer in our Airframe and Composite Design group in San Diego, CA.

DUTIES AND RESPONSIBILITIES:
•Provides expertise in tooling design for both large and small composite laminates including primary structure and control surfaces.
•Understands composite tooling theory and the selection of appropriate tooling material for the application and/or production volume required.
•Applies technical knowledge to analyze, investigate and resolve assigned engineering problems encountered on the production floor with regard to damaged tooling.
•Applies engineering principles effectively for design, development and sustaining engineering activities related to aircraft systems integration and installation.
•Documents findings, communicates results to engineering staff, makes technical presentations and may represent the organization as the prime technical contact on small identifiable projects.
•Advises management of work in progress, material availability and potential problems to ensure that personnel, equipment, materials and/or services are provided as needed.
•Person will be responsible for working with personnel throughout the company to help resolve any engineering related tooling issue that may impact the manufacturing delivery schedule.
•Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
•Expected to work in a safe manner in accordance with established operating procedures and practices.
•Other duties as assigned.
•Exposure to various composite manufacturing processes and tooling concepts.
•Experience with Pro-E Cad software.
•Responsible for observing all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
•Expected to work in a safe manner in accordance with established operating procedures and practices.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent engineering experience in lieu of education. Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks. Able to work extended hours as required. A Professional Engineering License is desirable.
Additional Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; two or more years of experience with a bachelors degree. May substitute equivalent engineering experience in lieu of education.
•Must have an understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.
•Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems.
•Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area.
•Background with various composite tooling design is preferred.
•Experienced with a CAD program; Creo, Solidworks, etc.
•Ability to present information to internal and external customers.
•Able to work extended hours as required.
•A Professional Engineering License is desirable.
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14307
Job Location: San Diego, CA
Rate: 45/hr max
Duration: 6 month contract
Input Date: 01/30/2018
Last Updated: 02/22/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Maintainability Eng III

Description:
Unique Skills:
Prior experience in development of Maintainability Predictions and analysis per MIL-HDBK-472, Human Engineering Design Guidelines per MIL-HDBK-759, Mean-Time-To-Repair (MTTR), assessing aircraft modifications for Maintainability impacts, CATIA V5 including Human Builder & Kinematics, and Reliasoft reliability & maintainability software are desired. Candidates with prior US military aircraft maintainer or air crew experience strongly preferred.

Education and Experience Requirements:
Bachelor’s degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience sufficient to perform the essential functions of the job. A&P license preferred. Six (6) years of Maintenance Programs/Maintainability experience or aircraft maintenance and operational experience.

Position Purpose:
Responsible for participating in the planning, development, and sustainment of Aircraft Maintenance Programs and related issues regardless of complexity.

Principal Duties and Responsibilities:

Essential Functions: 1. Share responsibility for planning, developing, and sustainment of new and existing Aircraft Maintenance Programs and engineering projects of major complexity within established scope, meeting requirements of FAR 25.1529 or other applicable regulatory directives. 2. Maintain a current knowledge of developments in the field of specialty and/or other related aircraft fields and provide recommendations to department management for process/procedure changes to prepare for new standards and implementation of new methodologies. 3. Meet cost and schedule requirements while ensuring accuracy and consistency. 4. Develop standards and guides to support Maintenance Programs activities. 5. Mentor other team members in areas relative to Maintenance Programs processes and procedures. 6. Engage with internal/external stakeholders to ensure department deliverables are being met or exceeded. 7. Recommend innovations that improve collaboration, communication, quality, and/or effectiveness of product. 8. Review, and provide feedback on written work of team members. 9. Perform other duties as assigned.

Other Requirements: 1. Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.
 
Job Number: 119581
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 02/14/2018
Firm Name: INTERGEN GROUP
Attention: Kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Qual Eng II

Description:
Unique Skills:
Catia V5 Exp.

Education and Experience Requirements:
Bachelors degree in a related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.4 years related technical exp in a manufacturing environment or repair and overhaul working with quality management systems with continually increasing responsibility. 3 years exp specific to the appropriate Quality department work to be performed.

Position Purpose:
Working under general supervision, in a team oriented environment, perform all tasks in area of responsibility in a timely and efficient manner to support the inspection/quality system ensuring all aspects of the delivered/finished article is manufactured in accordance with approved quality system requirements and is certified as compliant to type design requirements or compliant with in service limitations for Repair Station activities.

Principal Duties and Responsibilities:

Essential Functions: 1. Manage the compliance of the quality activities of suppliers or facilities through the application of system, product and process audits to the requirements of the FAA approved data. 2. Certify a supplier or assess a facility quality system, personnel, processes and equipment as required to the applicable quality standards. 3. Perform surveillance, source inspections, and first article inspections at supplier facilities, foreign or domestic and/or monitor the inspection system performance throughout all Operations, Materials and Repair Stations. 4. Coordinate quality assurance program plans, monitor and modify audit schedules, evaluate acceptance test programs, and quality engineering requirements of suppliers or facilities and review to ensure program effectiveness and integrity. 5. Witness and validate acceptance, qualification, interchangeability, configuration and compatibility tests. 6. Provide liaison support regarding supplier or facility performance to established requirements. 7. Coordinate documentation support for FAA Compliance.

Additional Functions: 1. Conduct product, system or process failure investigations, and provide technical assistance in resolution of quality problems. 2. Verify required corrective action implementation for timeliness and effectiveness. 3. Perform trend analysis of audit results to identify quality system deficiencies. 4. Work with other departments as needed to meet quality compliance of parts and processes. 5. Perform other duties as assigned.

Other Requirements: 1. Previous Quality experience relative/complying with Regulatory Standards. 2. Understands and is able to apply and communicate to others: blueprints/specifications; Federal Aviation Regulations; Quality Control System Requirements; knowledge of manufacturing/fabrication techniques and processes 3. Computer literate; capable of working within the various software applications utilized throughout the corporation. 4. ASQ Certification as Quality Engineer or Quality Auditor preferred. 5. A&P license preferred.
 
Job Number: 122241
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 02/14/2018
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Administrative / Coordinator

Description:
Notes from Hiring Manager:

* This position will be supporting one of our client’s Security Solutions contracts
* Should have an administrative logistics background, preferably with defense / government / military contracts.
* Must be detail oriented with strong MS office skills, particularly Office and Excel (client currently has 2016 Excel software so must have experience with at least 2013; 2016 preferred)
* Need to have great communication skills as they will be dealing with both internal and external persons
* Strong organization skills as they’ll also be assisting with the Supply Chain Group
* Looking for the right personality fit; someone who can think / act on-the-fly & who’s not easily frustrated

Responsibilities:

> Organize and properly record archived files
> Filing/scanning hard copy files, data entry
> Research data / old files and properly organize / match
> Work closely with Supply Chain Group for deliveries, scheduling/planning of materials and other shipments as needed
> Assist with clerical tasks, i.e. shipping documents, completion sheets, etc….
> Provide additional admin support as needed

Experience:

> 5+ years of related work experience preferably with defense / government / military contracts
> Must be detail oriented and able to multi-task and prioritize
> Must be US Citizen w/ HS Diploma or equivalent; Associate / Bachelor degree in a related field is a plus
> Experience and familiarity with ITAR compliance is preferred
> Demonstrate reliability and strict confidentiality
> Excellent customer service demeanor to interact effectively with customers/vendors
> Work independently with limited supervision/consultation from superiors
> Demonstrate a working knowledge of Microsoft Office applications, especially Word & Excel (2013 or 2016)
> Understand and follow oral and written directions
> Plan and organize work to complete promptly, paying close attention to detail
> Strong attention to detail; excellent data entry and organizational skills; strong written and verbal communication skills

Take Care,


Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
 
Job Number: 040_2017
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes
Duration: 6-12+ Months
Start Date: ASAP
Input Date: 12/05/2017
Last Updated: 04/02/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Customer Service & Support Admins - Phoenix, AZ

Description:
Now Hiring Customer Service & Support Admins!

Overview:

STS AeroStaff Services is now offering Customer Service & Support Admin jobs in Phoenix, Arizona. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best administrative jobs in Phoenix, Arizona; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as a Customer Service & Support Admin, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Essential Duties & Responsibilities:

• Provides friendly service to and maintains positive relationships with all internal and external Customers
• Works in a cooperative spirit to ensure the success of our Company
• Performs secretarial and administrative duties for Leadership and staff under minimal supervision
• Answers calls, relays and takes messages, transfers calls, provides assistance to callers, screens calls and places calls for management
• Maintains department personnel files and paperwork
• Organizes and maintains payroll file room and coordination of timely rotation of files to off-site storage facility
• Orders supplies using established Company vendors and ordering methods
• Opens, sorts, screens and responds to incoming mail
• Composes, types and edits correspondence
• Compiles data and prepares special reports; gathers and summarizes data
• Makes arrangements for meetings and luncheons as directed by the department Leadership Team
• Maintains appointment calendars for management
• Arranges travel and accommodations for management and staff
• Establishes meeting times, secures location and contacts attendees
• Establishes and maintains files and other information for reference and control purposes
• Prepares confidential paperwork regarding performance appraisals, promotions and other people-related issues for management
• Maintains invoice and budget files and assists in the compilation of variance reports
• Operates computer equipment utilizing word processing, spreadsheet, data base management and presentation software
• Some data entry may be required
• Operates copy machine, FAX equipment and other standard office equipment
• May perform other job duties as directed by Leadership
• Must be able to meet any physical ability requirements listed on this description
• May perform other job duties as directed by Employee's Leaders

Qualifications:

• High School diploma or equivalency required
• Previous analytical/technical experience preferred
• Must provide friendly service to and maintains positive relationships with all internal and external Customers
• Operation of multi-line telephone with courtesy and sufficient speed
• Ability to operation copy machine, FAX machine and other standard office equipment
• Open, sort and screen incoming mail
• Must master computer software applications such as Outlook, Quickbase, Microsoft Word, Excel, PowerPoint and Access
• Must have sufficient ability to handle and resolve office administration tasks
• Must be able to perform mathematical computations
• Must possess excellent organization skills including establishing and maintaining files for reference and control purposes
• Must work under tight time constraints including meeting unforeseen deadlines to accomplish assignments and projects
• Must be able to effectively communicate verbally, by telephone and face to face
• Must have ability to keyboard with sufficient speed and accuracy to meet the demands of the job
• Must be able to read documents, follow instructions, learn and understand office procedures
• Must compile data and prepare special reports
• Responsible for making arrangements for meetings and luncheons and handle travel arrangements as necessary
• Responsible for the payroll records for the entire Department, including Incentive Passes
• Must have ability or must gain ability to use SWEEP for ordering department supplies
• Must be able to work varying schedules and work weekends as required
• Must be able to work occasional overtime, as necessary
• Must be able to comply with Company attendance standards as described in established guidelines
• Must meet confidentiality expectations as to confidential, proprietary and sensitive Company information
• Must maintain a well-groomed appearance per Company appearance standards as described in established guidelines
• Must be a U.S. citizen or have authorization to work in the United States as defined by the Immigration Reform Act of 1986

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.
 
Job Number: 41478
Job Location: Phoenix, AZ
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/12/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cyber - A&A Engineer - Analyst Lead Validator - DOD - Top Secret Clearance

Description:
Primary responsibility is to perform in the Assessment & Authorization (A&A) role to ensure assigned Dept. of Navy/DoD systems/Enclaves/Networks have the proper Authorization to Operate (ATO) and Authorization to Connect (ATC) certifications.
• Will be a part of a team developing recommended courses of action needed to transition current policies and procedures to the Risk Management Framework (RMF) approved processes.
• Advise and assist associated organization POCs in their efforts to prepare and submit ATO and ATC packages to their respective approval authorities.
• Identify network devices and equipment that have not been properly updated to minimize the potential for unauthorized intrusions and malicious software.
• Conduct risk and vulnerability assessments of planned and installed information systems to identify vulnerabilities, risks, and protection needs.
• Provide solutions to complex problems that require the regular use of expertise and creativity. Problems are broadly defined and solutions require the continuation of specialized theories and knowledge.
 
Job Number: 5197 & 5198
Job Location: North Charleston, SC
Rate: $65-75hr (DOE)
Per Diem: NO
Overtime: Possible
Duration: Contract
Start Date: ASAP
Input Date: 02/01/2018
Last Updated: 02/19/2018
Firm Name: MIDCOM CORPORATION
Attention: Juan Johnson
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design & Analysis Engineer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design & Analysis Engineer 3
(U.S. Citizenship Required*)
Huntington Beach, CA
2018-5280

Join our team as a Design & Analysis Engineer in Avionics and Flight Controls Engineering on the C-17 Military Airlifter Program in Long Beach/Huntington Beach, California.

Responsibilities:
• Developing electronic and electrical flight control system solutions
• Participating in modification projects for flight control hardware and software designs based on platform requirements
• Executing systems and software testing to verify operational and functional requirements
• Managing hardware/software suppliers' performance to ensure customer requirements are met
• Supporting resolution of product integration & field operation issues
• Researching new technologies for potential application to C-17
• Developing solutions to technical problems of safety of flight scope and impact
• Applying solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
• Integrating into teams and collaborating with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
• Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
• Work with customers and their representatives to obtain feedback for product enhancements and corrective actions.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
• Degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

Apply Here: https://careers-moseleytechnical.icims.com/jobs/5280/design-and-analysis-engineer-3/job?mode=view
 
Job Number: 2018-5280
Job Location: Huntington Beach, CA
Rate: BOE
Duration: 6 Months
Input Date: 02/01/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Carl May
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design & Analysis Engineer 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design & Analysis Engineer 4
(U.S. Citizenship Required*)
Huntington Beach, CA
2018-5278

Join our team as a Design & Analysis engineer in Avionics and Flight Controls Engineering on the C-17 Military Airlifter Program in Long Beach/Huntington Beach, California.

Responsibilities:
• Developing electronic and electrical flight control system solutions
• Participating in modification projects for flight control hardware and software designs based on platform requirements
• Executing systems and software testing to verify operational and functional requirements
• Managing hardware/software suppliers' performance to ensure customer requirements are met
• Supporting resolution of product integration & field operation issues
• Researching new technologies for potential application to C-17
• Developing solutions to technical problems of safety of flight scope and impact
• Applying solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
• Integrating into teams and collaborating with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
• Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
• Work with customers and their representatives to obtain feedback for product enhancements and corrective actions.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience.
• Degree from an ABET accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

Apply Here: https://careers-moseleytechnical.icims.com/jobs/5278/design-and-analysis-engineer-4/job?mode=view
 
Job Number: 2018-5278
Job Location: Huntington Beach, CA
Rate: BOE
Duration: 6 Months
Input Date: 02/01/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Carl May
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Prefer Secret Clearance

Familiarity with SAE AS50881 and ANSI/ASME Y14.100 or related design and drafting standards
• CATIA V5 experience
• Familiarity with Change Documentation process and all related requirements to this process,Microsoft office suite (Word, Excel, PowerPoint)

Teamcenter or similar PDM/PLM software tool
• Experience working in an aerospace environment with exposure to or interface with DoD customers
• AutoCAD or other 2D drafting program
 
Job Number: 0310
Job Location: KY
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 02/09/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
1. Review 3D engineering data for conformance to requirements as directed.
2. Check parts for fit, form and function to the extent that information is available.
3. Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
1. Accuracy and completeness of engineering product definition data, including CAD and PDM data.
2. Proper application and compliance with all Engineering and customer drawing requirements.
3. Use and understanding of GD & T a must.
4. Dimensioning and tolerancing including familiarity with ASME Y14.5.
5. Application of best drafting and design practices and procedures.
6. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
7. Advise Design personnel regarding company drawing and design practices and procedures.
8. Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
9. Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
10. Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
11. Knowledge of company parts list & PdocM, a plus.
12. Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
1. Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
2. Ensures designs meet customer criteria, quality standards and FAA requirements.
3. Adheres to budget and project schedules.
4. Provides design guidance and feedback to other engineering personnel.
5. Other duties as assigned.
6. Knowledge of industry design and documentation standards.
7. Experience with mechanical assemblies and manufacturing technique design.
8. Ability to work independently and cross-functionally.
9. Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills.
10. Knowledge of Excel, Share Point software, Microsoft Office a plus

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-191
Job Location: Savannah, GA
Rate: $50.00 - $55.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
•Experience in part/assembly design for consumer products.
•Solid understanding of strength of materials, material science, Design-for-Assembly, and Geometric Dimensioning & Tolerancing as related to product development.
•Experience in part/assembly/tooling fabrication methods from prototype through mass production manufacturing.
•Proficiency in 3D parametric modeling software is required (top-down/bottom-up modeling, 3D sketching, and configuration based models). SolidWorks experience is preferred.
•Experience in rapid prototyping and machine tool fabrication methods is desired
•Writing technical specifications, test procedures and project documentation
•Ability to execute complex verbal/written instructions for multiple project initiatives.
•Understanding of battery chemistries and ANSI or IEC standards is a plus.
 
Job Number: 41471
Job Location: CT
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 01/30/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 1

Description:
Design and Analysis Engineer 1

Location: Oklahoma City, OK
Duration: 6 Months

Skill Code: 664-Electronic Sys Design & Analy

Description:
This is an entry level engineering position performing Avionics and associated ground Systems support and Testing. Candidate will perform AV/FC Systems Development Support. This activity will consist of performing system core & interface testing, as well as Lab Test Equipment Support & Maintenance for the C-17 Military Airlifter. Candidate will become a team member in the avionics organization working closely with software, avionics, and systems engineers. Activities will be undertaken per organization and program standards and procedures, under the guidance of subject matter expert engineers and management, but with appropriate freedom to learn and innovate.

A successful candidate will possess excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization. The selected candidate will be tasked to develop solutions to engineering technical problems; and to apply engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

Education / Experience:
Required: Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry.

Please share updated resume at ravi@iconma.com in interested.
 
Job Number: 18-02264
Job Location: Oklahoma City,, OK
Input Date: 02/09/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 1

Description:
Design and Analysis Engineer 1

Location: Oklahoma City, OK
Duration: 6 Months

Skill Code: 664-Electronic Sys Design & Analy

Description:
This is an entry level engineering position performing Avionics and associated ground Systems support and Testing. Candidate will perform AV/FC Systems Development Support. This activity will consist of performing system core & interface testing, as well as Lab Test Equipment Support & Maintenance for the C-17 Military Airlifter. Candidate will become a team member in the avionics organization working closely with software, avionics, and systems engineers. Activities will be undertaken per organization and program standards and procedures, under the guidance of subject matter expert engineers and management, but with appropriate freedom to learn and innovate.

A successful candidate will possess excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization. The selected candidate will be tasked to develop solutions to engineering technical problems; and to apply engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

Education / Experience:
Required: Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry.
 
Job Number: 18-02264
Job Location: Oklahoma City, OK
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: 2/26/18
Input Date: 02/09/2018
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design and Analysis Engineer 2 positions

Description:
Mech Sys Design & Anlaysis Engr 3

Location: Seal Beach, CA
Duration: 9+ months

Description:
Supports the computer-aided design (CAD) development and documentation of mechanical, hydraulic , propulsion and flight controls Maintenance Ground Operations Systems (MGOS) ground support equipment (GSE) tooling design. Supports the development, testing and/or modification of GSE systems, components and installation designs/drawings to provide design documentation to downstream groups. Profficient with Geometric Tolerancing and Drawing Release (PDM / ENOVIA).Generates GSE CAD 3-D models (in CATIA V5) and documents analyses to validate and verify GSE and components meet requirements and specifications. Produces First Pass Quality (FPQ) GSE designs and drawings per MGOS standards, processes and Desk Instructions. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Skill Code: 63B-Mechanical System Design
 
Job Location: Seal Beach, CA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 9 months
Start Date: Asap
Input Date: 03/28/2018
Last Updated: 03/30/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Design and Analysis Engineer 3

Location: Oklahoma City, OK
Duration: 6 months

Job Description:
This is a mid-level engineering position performing Avionics and associated ground Systems support and Testing. Candidate will perform Lab Test Equipment/systems Operations, Support & Maintenance. This includes Avionics and associated ground Systems development support, troubleshooting and Testing, and performing system core & interface testing for the C-17 Military Airlifter. Candidate will become a team member in the avionics organization working closely with software, avionics, and systems engineers. Activities will be undertaken per organization and program standards and procedures, under the guidance of subject matter expert engineers and management, but with appropriate freedom to learn and innovate.

A successful candidate will possess excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization. The selected candidate will be tasked to develop solutions to engineering technical problems; and to apply engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
664-Electronic Sys Design & Analy
 
Job Number: 18-02263
Job Location: Oklahoma City, OK
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: 2/26/18
Input Date: 02/09/2018
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Please share updated resume at ravi@iconma.com

Job Title: Design and Analysis Engineer 3 (18-02081)

Location: Oklahoma City, OK
Duration: 6 Months

Skill Code: 664-Electronic Sys Design & Analy

Description:
Client is seeking a engineer on the C-17 Military Airlifter Program in Oklahoma City, OK. Candidate to perform Lab Test Equipment/Systems Operations, Support & Maintenance, and Ground Support software modification and integration. Familiarity with ATLAS, test equipment, LabWindows CVI and ability to troubleshoot electronics desired.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.




Design and Analysis Engineer 3 / (18-02072)

Location: Oklahoma City, OK
Duration: 6 months

Description:
Perform Avionics and associated ground Systems support and Testing with focus on flight controls testing. Perform AV/FC Systems Development Support. Perform system core & interface testing. Perform Lab Test Equipment Support & Maintenance.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
664-Electronic Sys Design & Analy



Design and Analysis Engineer 3 (18-02078)

Location: Oklahoma City, OK
Duration: 6 Months

Job Description:
Perform AV/FC and associated ground Systems depot level maintenance, development, repair and Testing. Lead and perform design, drawing development and release, fabrication and maintenance of equipment for ground support depot level troubleshooting and repair of fielded ground support end items.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
664-Electronic Sys Design & Analy



Design and Analysis Engineer 3 (28872-1)

Location: Oklahoma City, OK
Duration: 6 months

Job Description:
Perform Lab Test Equipment/Systems Operations, Support & Maintenance. Perform Avionics and associated ground Systems development support, troubleshooting and Testing. Perform system core & interface testing. Familiarity with software development and maintenance, lab maintenance is desired.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
664-Electronic Sys Design & Analy
 
Job Number: 18-02077
Job Location: Oklahoma City,, OK
Input Date: 02/16/2018
Last Updated: 02/23/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

Design and Analysis Engineer 4 - CA

Description:
Chipton-Ross is seeking 1 Design and Analysis Engineer 4's located in Huntington Beach, CA

RESPONSIBILITIES:
Seeking design and analysis engineers in Avionics and Flight Controls Engineering on the C-17 Military Airlifter Program. Candidate to perform Lab Test Equipment/systems Operations, Support & Maintenance, and develop Test Program software modification and integration.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 3:45 PM

 
Job Number: 168163
Job Location: Huntington Beach, CA
Rate: $DOE
Duration: 6 Months
Input Date: 01/25/2018
Last Updated: 09/24/2018
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Digital FPGA Design Engineer CA

Description:
161212
Request number: 5156
Date created: 02/06/2018
Job title: Digital/FPGA Design Engineer
Number of openings: 1
Position location: Torrance - CA
Employment type: Contract
OT exempt: No


Shift: 1st
Education Requirement: MS/MA
Driving on company time?: No
Minimum Years of Experience: 5
Maximum Hourly Pay Rate: 50
Start Date: 02/12/2018
Tentative End Date: 08/12/2018


Job Description
Function: As the Digital/FPGA Design Engineer, you will be responsible for designing, developing, modifying, and evaluating FPGA's and ASIC's that interface with electronics, electro-mechanical or mechanical components, assemblies or integrated circuitry for actuation systems or Avionics equipment. Includes new design, as well as modification activities that results in significant product enhancement. Activities encompass design, analysis, testing and process development using engineering principles and methods. Technical integrated circuits; and embedded software/firmware design. Designs will have emphasis on high reliability flight critical applications designed to DO254 Level A requirements.

Required skills:
· Bachelor of Science in Electronics Engineering
· Five or more years relevant experience
· High-speed digital logic circuit designs for Flight critical applications, Critical Timing analyses.
· Experience working on FPGA or ASIC designs that have been qualified to DO254 Level A.
· VHDL Coding of Complex high-speed digital logic.
· DOORS experience is a plus
 
Job Number: MB-5156
Job Location: Torrance, CA
Rate: 50/hr max
Duration: 6 month contract
Input Date: 02/07/2018
Last Updated: 03/05/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Digital/FPGA Design Engineer

Description:
As the Digital/FPGA Design Engineer, you will be responsible for designing, developing, modifying, and evaluating FPGA's and ASIC's that interface with electronics, electro-mechanical or mechanical components, assemblies or integrated circuitry for actuation systems or Avionics equipment. Includes new design, as well as modification activities that results in significant product enhancement. Activities encompass design, analysis, testing and process development using engineering principles and methods. Technical integrated circuits; and embedded software/firmware design. Designs will have emphasis on high reliability flight critical applications designed to DO254 Level A requirements.


· Bachelor of Science in Electronics Engineering
· Five or more years relevant experience
· High-speed digital logic circuit designs for Flight critical applications, Critical Timing analyses.
· Experience working on FPGA or ASIC designs that have been qualified to DO254 Level A.
· VHDL Coding of Complex high-speed digital logic.
· DOORS experience is a plus
 
Job Number: 5156
Job Location: Torrance, CA
Rate: DOE
Duration: 6-12 Months
Start Date: ASAP
Input Date: 02/07/2018
Last Updated: 02/26/2018
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: Milwaukee, WI
Duration: 12 months

Principal Duties:
- Participates in the development and/or improvement of new and existing products for design change, cost reductions, warranty improvements, and manufacturability.
- Works with minimal direction to create and develop product concepts, and oversees the development to meet time and budgetary constraints.
- Conducts engineering qualification tests on the product including coordinating with outside agencies to ensure compliance.
- Takes initiative to recommend projects, product improvements or cost reductions.
- Performs tradeoff between implementation, schedule, cost and resource constraints and recommend alternatives.
- Provides technical feedback, input and consultation to other departments in design or implementation activities.
- Utilizes CAD systems as related to job.
- Utilizes software application programs such as Microsoft Office, Mentor Graphics Expedition, etc.
- Handles multiple complex or multi-activity tasks simultaneously. Has effective time management skills so that high priority tasks are completed as planned.
- Other duties as assigned.

Requirements:
- Bachelor Degree in Electrical Engineering or a closely related discipline. Master degree preferred.
- Minimum 5 years, preferred 10 years, of experience in product design or engineering experience. Advanced skills, additional education and exceptional performance may alter this requirement.
- Able to apply fundamental engineering theories, mathematics, mechanics, and physical science concepts to the job.
- Experience with electrical schematic capture, PCB layout, 3D CAD modeling, parts database structures, BOM structures, and engineering change management.
- Preferred experience with Mentor Graphics Expedition, Mentor Graphics Valor, and Windchill/Creo.
- Preferred experience in the fields of electrical (120/230Vac), electronic, mechatronics, and electro-mechanical design.
- Preferred experience designing circuits to control DC brush and brushless motors.
- Preferred experience with EMC design techniques.
- Preferred experience designing for regulatory compliance of UL, CE, and other global standards.
- Knowledge of manufacturing processes and limitations to assure conformance of design and fabrication of product.
- Able to obtain and interpret datasheets for electrical and control components, and determine electrical and mechanical requirements.
- Able to proficiently use the tools or materials required to perform typical assigned duties.
- Demonstrated ability to work in a team environment, good written and oral communications skills, flexibility and adaptability to changing situations.
- Preferred experience interfacing with global manufacturing facilities.
- Ability to work independently, as well as direct the work of others.
- High attention to detail and solid organizational skills.
- Possess a professional appearance and positive work attitude, in accordance with work area and company policies.

If interested then please send updated resume at ravi@iconma.com
 
Job Number: 18-00807
Job Location: Milwaukee,, WI
Input Date: 01/17/2018
Last Updated: 02/02/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design & Analysis Engineers III - OK

Description:
Active Secret Clearance, NOT REQUIRED to start.

Our Aerospace Client is currently seeking an experienced Electrical systems Designers to perform Electrical Loads Analysis and power systems modification. This
includes Airborne Surveillance Command and Control aircraft from around the world including, NATO, French, Saudi, US, UK, Japan AWACS, B-52 Bombers, C32/C40 VIP transports, , the E-4 National Airborne Operations Center, KC-767
International Tankers and VC-25 presidential transport.
This position is located in Oklahoma City, Oklahoma
Job Responsibilities will include but not be limited to:
- Develop and document electrical load analysis based upon system design.
- Provide coordination memos with impact analysis for systems design changes.
- Present results of analysis at customer design reviews (PDR, CDR)
- Publish reports detailing the aircraft electrical load and bus capability.
- Utilize existing software to complete Electrical Load Analysis
- Direct a team of engineers providing individual direction.
- Leverage existing tools and help develop a path forward for a common tool for ELA.
- Works on unusually complex technical problems and provides solutions which are highly innovative and ingenious.
- Develops advanced technical ideas and guides their development into final product
- Serves as organization spokesperson on advanced projects and programs. Acts as advisor to management and
customers on advanced technical research studies.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Previous experience with aircraft power distribution and architecture desired.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 01/09/2018
Last Updated: 03/09/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ElectroMechanical Engr - Level 3 / PWB / CREO / Catia / active secret FL

Description:
Requirement#MFC-REQ-1452
Work LocationOrlando, FL
Work Week9/80-A

Needed Date08/14/2017
End Date08/13/2018
Number of Resources4

Number of Resources Level of Clearance Prime Contract Number Can Start Without Clearance(Yes/No) Interim Clearance Sufficient
4 Secret No No

TitleElectroMechanical Engr - Level 3
Description
Hardware ElectroMechanical packaging design engineer will be responsible for the hardware development for missile and/or fire control electronics: specifically printed wiring board (PWB) and circuit card assembly (CCA) design as well as general packaging support. Activity will require cross functional coordination to complete PWB/CCA hardware design and integration for the designated weapon system. General qualifications: Researches, develops, and designs component, equipment, and networks for military applications. Candidate must have experience CCA and PWB design as well as the associated components and connectors.
Skill/Experience/Education
Mandatory:

Candidate must have a Bachelors degree from an accredited college in a related discipline, Proficient with Pro-E and/or Creo or Catia software, Must have security clearance
Desired:

CREO


Interview RequiredYes
Max Pay Rate53.00 USD

Shift1st Shift
OT AllowedYes (OT Limitation: No)
TravelNo
Non-Exempt
Rate TypePer Hour
 
Job Number: JE-1452
Job Location: Orlando, FL
Rate: 53/hr max
Duration: 12 month contract
Input Date: 02/05/2018
Last Updated: 03/01/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Engineers - Orlando, FL

Description:
STS AeroStaff Services is hiring Electromechanical Engineers in Orlando, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Hardware ElectroMechanical packaging design engineer will be responsible for the hardware development for missile and/or fire control electronics: specifically printed wiring board (PWB) and circuit card assembly (CCA) design as well as general packaging support
• Activity will require cross functional coordination to complete PWB/CCA hardware design and integration for the designated weapon system
• General qualifications: Researches, develops, and designs component, equipment, and networks for military applications

Basic Qualifications:

• Candidate must have a Bachelor’s degree from an accredited college in a related discipline
• Candidate must have experience CCA and PWB design as well as the associated components and connectors
• Proficient with Pro-E and/or Creo or other 3D software (such as Catia, Solidworks, etc)
• Must be able to obtain a security clearance

Preferred Qualifications:

• CREO experience

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41497
Job Location: Orlando, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/13/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Design & Analysis Engineer I & III - (OK)

Description:
This is a mid-level engineering position performing Avionics and associated ground Systems support and Testing. Candidate will perform avionics and associated Ground Systems support and testing with a focus on Flight Controls. Perform AV/FC Systems analysis, development and test. All effort is in support of the C-17 Military Airlifter. Candidate will become a team member in the avionics organization working closely with software, avionics, and systems engineers. Activities will be undertaken per organization and program standards and procedures, under the guidance of subject matter expert engineers and management, but with appropriate freedom to learn and innovate.

A successful candidate will possess excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization. The selected candidate will be tasked to develop solutions to engineering technical problems; and to apply engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 02/09/2018
Last Updated: 03/09/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Design & Analysis Engineer II & III & IV - (CA)

Description:
SEVERAL OPENINGS IN THE HUNTINGTON BEACH, CA AREA.

- Developing electronic and electrical flight control system solutions
- Participating in modification projects for flight control hardware and software designs based on platform requirements
- Executing systems and software testing to verify operational and functional requirements
- Managing hardware/software suppliers' performance to ensure customer requirements are met
- Supporting resolution of product integration & field operation issues
- Researching new technologies for potential application to C-17
- Developing solutions to technical problems of safety of flight scope and impact
- Applying solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
- Integrating into teams and collaborating with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
- Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
- Work with customers and their Boeing representatives to obtain feedback for product enhancements and corrective actions.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEhb
Job Location: Huntington Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 01/26/2018
Last Updated: 03/09/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Systems Design & Analysis Engineer III - (OK)

Description:
Perform Lab Test Equipment/Systems Operations, Support & Maintenance. Perform Avionics and associated ground Systems development support, troubleshooting and Testing. Perform system core & interface testing. Familiarity with software development and maintenance, lab maintenance is desired.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 02/06/2018
Last Updated: 03/23/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Systems Design & Analysis Engineer III - (OK)

Description:
We are seeking a engineer on the C-17 Military Airlifter Program in Oklahoma City, OK. Candidate to perform Lab Test Equipment/Systems Operations, Support & Maintenance, and Ground Support software modification and integration. Familiarity with ATLAS, test equipment, LabWindows CVI and ability to troubleshoot electronics desired.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 02/06/2018
Last Updated: 03/23/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Embedded S/W Engineer - Level 2 (6) - TX - C

Description:
Chipton-Ross is seeking a Embedded S/W Engineer - Level 2 (6) for an opening in Grand Prairie, TX.

RESPONSIBILITIES:
Client's Tactical Missiles Advanced Programs area is seeking Software Engineering candidates to perform development associated with the following program product lines: Tactical Missile System (TACMS), Army Tactical Missile System (ATACMS), and Guided Multiple Launcher Rocket System (GMLRS). Software engineering effort will be to implement Operational Flight Software (OFS), Operational Test Software (OTS), and Launcher Simulation/Emulator Software updates.

Skills required are real time programming, including experience with the vxWorks real time operating system, inertial and GPS navigation applications, and Ethernet communication protocol. Preferred skills and experience include use of the GNAT Ada compilation system, C/C++, Wind River Workbench development environment, Power PC experience, including use of an In-Circuit Emulator, and the Razor configuration management data base system.

BS in Computer Engineering, Computer Science, Software Engineering, or Related Field C/C++, ADA, Real Time Software Development, Wind River Workbench, Power PC Development, vxWorks, Inertial & GPS navigation unit experience

PREFERRED EXPERIENCE:
Software configuration management tool experience, Razor

EDUCATION:
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field C/C++, ADA, Real Time Software Development, Wind River Workbench, Power PC Development, vxWorks, Inertial & GPS navigation unit experience

WORK HOURS:
9/80, 1st Shift, Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 165908
Job Location: Grand Prairie, TX
Rate: Up to $80.73 DOE
Duration: 12 Months
Input Date: 10/17/2017
Last Updated: 09/24/2018
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Level 2 with active secret TX

Description:
160551
Requirement#MFC-REQ-1512
Work LocationGRAND PRAIRIE, TX
Work Week9/80-A
Needed Date12/04/2017
End Date06/04/2018
Number of Resources4
Active Secret

Title:Embedded S/W Engineer - Level 2

Description
Our Australian Mine Truck program is looking for software engineering with experience in ground vehicle software development.
Looking for candidates with the following attributes:
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and product on Autonomous Ground Vehicle System.
Interfaces with customers, suppliers, application users, and other technical and support personnel.
Must have Secret clearance in place prior to submitting resume. Resume must have status of clearance stated.
Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
C/C++
Software Static Analysis Tools
Object oriented design
Real Time Software Development
Algorithms Implementation and Development
Knowledge of model based design using Matlab/Simulink
Desired:

Software Configuration Management (CM) Tools;

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Software Static Analysis Tools 4-5 Years Yes
Object oriented design 4-5 Years Yes
Real Time Software Development 4-5 Years Yes
Algorithms Implementaiton and Development 4-5 Years No
Knowledge of model based design using Matlab/Simulink 4-5 Years No
Software Configuration Management (CM) Tools 0-3 Years No


Interview Required Yes
Max Pay Rate 80/hr

Shift1 st Shift
OT Allowed No
Travel Yes (Various)
Travel Description Travel to customer locations (as required)
Exempt
 
Job Number: JE-1512
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 6 month contract
Input Date: 03/15/2018
Last Updated: 04/04/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Level 2 with active secret TX

Description:
160554
Requirement#MFC-REQ-1515
Work LocationGRAND PRAIRIE, TX
Work Week9/80-A

Needed Date02/05/2018
End Date08/05/2018
Number of Resources2

Active Secret

Title:Embedded S/W Engineer - Level 2
Description
Lockheed Martin is seeking Software engineers to enhance their existing Ground vehicle Hardware in the Loop (HWIL) Laboratory and its tools for their Australian Mine autonomous vehicle program.
These positions required the following skill sets: Past Hardware In the Loop (HWIL) development experience, Low Fidelity Gazebo models, vehicle models, mine environment models, sensor, models, Test cases, and other simulation development/enhancement as needed.

Primary development language will be C++ and it will be hosted on multiple Operating Systems such as Ubuntu, Redhat Linux, and VxWorks. Experience with ROS/Gazebo is also highly desired.

Travel will be required to Littleton Colorado
Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, Hardware In The Loop (HWIL) experience, C/C++, Gazebo, ROS, simulation development/enhancement, Ubuntu, Redhat Linux, and VxWorks.
Desired:

Software Configuration Management (CM) Tools;

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Hardware In The Loop (HWIL) experience 4-5 Years Yes
Gazebo 4-5 Years Yes
ROS 4-5 Years Yes
Prior simulation development/enhancement experience 4-5 Years Yes
Ubuntu 4-5 Years Yes
Redhat Linux 4-5 Years Yes
VxWorks 0-3 Years Yes



Interview Required Yes
Max Pay Rate 80/hr
Shift 1st Shift
OT Allowed No
Travel Yes (Various)
Travel Description Travel to customer locations (as required)
Exempt
 
Job Number: JE-1515
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 6 month contract
Input Date: 03/15/2018
Last Updated: 04/04/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Level 2 with active secret TX

Description:
160555
Requirement#MFC-REQ-1516
Work LocationGRAND PRAIRIE, TX
Work Week9/80-A

Needed Date02/26/2018
End Date02/22/2019
Number of Resources6

Active Secret

Title:Embedded S/W Engineer - Level 2

Description
Lockheed Martin's Tactical Missiles Advanced Programs area is seeking Software Engineering candidates to perform development associated with the following program product lines: Tactical Missile System (TACMS), Army Tactical Missile System (ATACMS), and Guided Multiple Launcher Rocket System (GMLRS). Software engineering effort will be to implement Operational Flight Software (OFS), Operational Test Software (OTS), and Launcher Simulation/Emulator Software updates.

Skills required are real time programming, including experience with the vxWorks real time operating system, inertial and GPS navigation applications, and Ethernet communication protocol. Preferred skills and experience include use of the GNAT Ada compilation system, C/C++, Wind River Workbench development environment, Power PC experience, including use of an In-Circuit Emulator, and the Razor configuration management data base system.
Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required BS in Computer Engineering, Computer Science, Software Engineering, or Related Field C/C++, ADA, Real Time Software Development, Wind River Workbench, Power PC Development, vxWorks, Inertial & GPS navigation unit experience
Desired:

Software configuration management tool experience, Razor

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
ADA 4-5 Years Yes
Real Time Software Development 4-5 Years Yes
Wind River Workbench 4-5 Years Yes
Power PC Development 4-5 Years Yes
vxWorks 4-5 Years Yes
Razor 0-3 Years No
Inertial & GPS navigation unit experience 4-5 Years Yes


Interview Required Yes
Max Pay Rate 80/hr
Shift 1st Shift
OT Allowed No
Travel Yes (Various)
Travel Description Travel to customer locations (as required)
Exempt
 
Job Number: JE-1516
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 03/15/2018
Last Updated: 04/04/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Secret Clearance

Description:
***Must have Active Secret Clearance***



Major purpose:

The Aero Software Engineer is responsible for designing, developing, integrating and test of high fidelity, scalable, physics-based Aerodynamics Software models for Real-Time simulation training applications. Responsibilities also include troubleshooting and fixing existing software discrepancies in a variety of aerodynamic subsystems such as: engines, flight controls, control loading, motion, and aircraft systems.



Major functions:

" Provide aerodynamic software design, development and integration support on a variety of simulator programs for both helicopter and fixed wing platforms

" Support peer reviews for aero software solutions

" Troubleshoot pre-existing software discrepancies within the aero domain

" Support testing activity both in the lab and on the simulator to include flight test matching, qualification test guide (Client) analysis and certification testing

" Ability to work with a variety of aero subsystems and understand the interactions with other simulator subsystems

" Ability to work tasks to completion with minimal guidance



Education/Required Experience


" B/S in Aerodynamics, Physics, Mathematics or equivalent experience with an emphasis on software

" Minimum of 8 years of aerodynamic engineering technical experience

" Minimum of 8 years experience in software development with C/C++, Fortran, and/or Ada

" Experience developing in a Unix or Linux operating system environment

" Experience working with FAA Level \'D\' fidelity requirements is desired

" Proficiency with Matlab SimuLink is a plus

" Systems integration experience

" Good computer skills including working knowledge of Microsoft Office

" Must exhibit strong problem-solving skills

" Strong communication skills and good team work



 
Job Number: 18-03647
Job Location: Arlington, TX
Rate: 65.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2018-08-12 00:00:00.0
Start Date: 2018-02-12 00:00:00.0
Input Date: 01/25/2018
Last Updated: 03/30/2018
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine/APU, ECS, Fuel Systems Engineer

Description:
Engine/APU, ECS, Fuel Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Required Experience in the following:
• System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing
• Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings
• Software Certification: Experience reviewing PSAC, CIA, SAS. Experience in software V&V Required Experience in the following:
• Engine Systems (FADEC)
• Environmental Control Systems
• APU systems
• Fuel systems (Distribution and Indication)

Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Exposure to Part 33 certification
• Project Management Skills/Experience:
• Configuration change management
 
Job Number: 7519
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Electromechanical - 3 / active secret preferred / CREO / electronic packaging CA

Description:
1631
Engineer Electromechanical - 3 (Job Number: 18002041)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Mar 19, 2018

Target End Date: Mar 15, 2019

Pay Rate: $58/hr. - $60/hr.

Work Week: 9/80

Location: Redondo Beach, CA

Duration: 1 year

The responsibilities include mechanical design & analysis using computer-aided design (CAD), conducting packaging trades, tolerance and interference analyses, generating drawing packages & associated electronic data, and supporting the fabrication, assembly and test of the hardware.


Basic Qualifications:

•5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.
•A Bachelor of Science degree in a STEM (Science, Technology, Engineering or Math) discipline
•Electronic packaging, CAD, or mechanical design experience in an aerospace environment
•Demonstrated technical skills with experience supporting a multi-disciplined team
•Experience working with different partners across organizations and programs
•Proficient in performing tolerance and interference analyses
•Experience in generating and releasing product detail and assembly drawings
•Experience with PTC Creo / Intralink software applications



Preferred Qualifications:

•A Master’s Degree in Mechanical or Aerospace Engineering and 4+ years of engineering experience in an aerospace environment
•Experience with electronic packaging / mechanical design for airborne & space applications
•Electronics design development and sustaining experience spanning cradle to grave
•Experience with Enovia PLM software application
•Proficiency with electrical design, electronics manufacturing processes and qualification activities
•Familiarity with research and development of advanced packaging technologies
•Active DoD Secret or Top Secret, and/or SCI clearance
 
Job Number: MB-1631
Job Location: Redondo Beach, CA
Rate: 58-60/hr
Per Diem: no
Duration: 12 month contract
Input Date: 06/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Engineer Structural- 5- Secret Clearance

Description:
PDS Tech is seeking a candidate for the Engineer Structural 5 position located in Melbourne, FL.  

Perform static, dynamic, and DaDT structural analyses of metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program.
Ensure that 
designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives.
The analyst may also be expected to derive non-flight applied loads, create, extract and 
distribute internal loads, and perform weight and stiffness optimization. T
ools utilized may include FEMAP, NX,Teamcenter 
and other software applications.

Basic Qualifications:



Bachelor of Science degree (ME/AE/CE) with 14 years of experience in AEROSPACE Structural Analysis.




Preferred Qualifications:



Knowledge of FEMAP and NX CAE. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.

 


 
Job Number: 1710075260
Job Location: Melbourne, FL
Duration: 5 months
Input Date: 10/11/2017
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023L3MAAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Design Checker - Level 3

Description:
Location: Lexington, KY
Rate: $25.00 - $35.00/HR
Duration: 1 year contract
Shift: 1st shift

****MUST have an Active Secret Clearance or to have had one within the last 2 years*****

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years*****
Examines engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.
- This position will support engineers in the review of design data that will comply with applicable military specifications, SAE, ANSI, ASME, and other related standards.
- This position will be responsible for reviewing drawings for formatting errors and working with the engineering team to ensure a high level of quality in the design data.
- This position will also be responsible for reviewing change documentation and its related incorporations for completeness and correctness.
- This position will help develop a set of common Design Standards that meets our Customers and Program requirements.
- This position will be expected, at times, to be involved with the drawing creation and subsequent Production review processes.

Skill/Experience/Education
Mandatory:
Must have 6+ years of experience of each of the following:
- Familiarity with SAE AS50881 and ANSI/ASME Y14.100 or related design and drafting standards - CATIA V5 experience
- Familiarity with Change Documentation process and all related requirements to this process, Microsoft office suite (Word, Excel, PowerPoint)
****MUST have an Active Secret Clearance or to have had one within the last 2 years*****

Desired:
- Teamcenter or similar PDM/PLM software tool
- Experience working in an aerospace environment with exposure to or interface with DoD customers
- AutoCAD or other 2D drafting program
 
Job Number: 8590
Job Location: Lexington, KY
Rate: $25.00 - $35.00/HR
Per Diem: Split Possible
Overtime: No
Duration: 1 yr
Input Date: 03/07/2018
Last Updated: 07/10/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician

Description:
This position will assist Manufacturing and/or Service Engineering activities related to MMDG product lines. The position will perform testing and troubleshooting to determine root cause failures and maintain the computer-controlled systems used within the production facility. The position will perform engineering tests per defined procedures to support the service department.

Required Qualifications:
• Ability to accurately interpret written test procedures
• Basic mechanical knowledge of test equipment
• Use various electronic equipment and software to complete tasks
• Use of office software (Word, Excel, Power Point, MS Project, Visio etc.)
• Ability to effectively communicate in person and via email/telephone
• Ability to effectively follow verbal instructions from department engineers
• Ability to lift up to 25 pounds on a repeated basis
• Close vision (clear vision at 20 inches or less) / Color vision (ability to identify and distinguish colors)
• Able to succeed in highly regulated compliance oriented environment while still providing service excellence

Other Required Skills:
• Ability to define problems, collect data, establish facts, and draw valid conclusions
• Ability to interpret an extensive variety of technical instructions and deal with several abstract and concrete variables
 
Job Number: 5159
Job Location: Salt Lake, UT
Rate: 20.00-25.00HR
Duration: 6-12 Months
Start Date: ASAP
Input Date: 02/09/2018
Last Updated: 02/26/2018
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designers/ Engineers (Level 3 and 4)

Description:
Equipment & Tool Designers and Engineers – Multiple Priority Positions

Location: Everett, WA
Duration: 9+ months

Description:
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Education/ Experience:
Degree and typical experience in engineering classification: Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
66U-Designer Engineer
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 9 months
Start Date: Asap
Input Date: 05/30/2018
Last Updated: 08/24/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Equipment & Tool Engineer 4
(U.S. Citizenship Required*)
Mesa, AZ
2018-5328

Responsibilities:
• Develop program/project requirements, and develop highly complex equipment/tooling concepts and designs solutions, including alternatives for the Production System.
• Validate analysis of technical data, influence product engineering design, and make robotics, automation or technical recommendations to support production system integration for aerospace products.
• Lead creation and modification of equipment and tooling definition at the program level.
• Execute project plans, provide input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets.
• Ensure compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
• Lead gated reviews and develop plans for production readiness, preventative maintenance and spares.
• Validate contractual performance milestones.
• Develop and implement work-arounds, and maintain configuration of hardware, software and documentation.
• Conduct studies and make recommendation for disposition of assets.

Qualification:
• As this is a Lead Checker Position, candidate needs extensive checking experience.
• Must be highly skilled in CATIA & Industry Standards.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience.
• Degree from accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5328
Job Location: Mesa, AZ
Rate: BOE
Duration: 6 Months
Input Date: 02/02/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4 (Everett, WA & Mesa, AZ )

Description:
Equipment & Tool Engineer 4

Location: Everett, WA & Mesa, AZ
Duration: 9 months

Description:
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Education/ Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
66U-Designer Engineer

Required Skills:
Skills: Category Name Required
Areas of Expertise CATIA V5 No
Software Skills CATIA V5 No
Technical Skills CATIA V5 No

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 18-00738
Job Location: Everett,, WA
Input Date: 02/16/2018
Last Updated: 02/23/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

Equipment & Tool Engineer 4 - AZ

Description:
Chipton-Ross is seeking a Equipment & Tool Engineer 4 for an opening in Mesa, AZ.

RESPONSIBILITIES:
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

REQUIRED EXPERIENCE:
Must have extensive checking experience.
Must be highly skilled in CATIA & Industry Standards.

EDUCATION:
Accredited Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 3:30 PM
 
Job Number: 168370
Job Location: Mesa, AZ
Rate: $DOE
Duration: 6 Months
Input Date: 02/01/2018
Last Updated: 09/24/2018
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer IV - (WA)

Description:
SEVERAL OPENINGS IN THE EVERETT, SEATTLE, WA AREA.

Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

CATIA V5

ACS Group (formerly 'Comforce')
 
Job Number: EquipToolWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 01/17/2018
Last Updated: 02/23/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities CAD Designer

Description:
Facilities CAD Designer
(U.S. Citizenship Required*)
Decatur, AL
2018-5282

Responsibilities:
• Responsible for management and maintenance of facility AutoCAD drawings and technical library.
• Facilitates employee move management.
• Coordinates with management for office rearrangement.
• Maintains equipment inventory and provides input on furniture selection and count.
• May identify vendors for food and fitness equipment.
• Works closely with Facility Engineering.

Qualification:
• Certified training in AutoCAD. Highly proficient utilizing AutoCAD software (version 2013 or newer) and ability to utilize software shortcut features and efficiencies.
• Create and modify detailed drawings using CAD hardware and software from sketches, layouts or notes provided by customer base.
• Must be able to perform the research required for completion of task assignments
• Provide engineering data, instructions, documents (drawings, reports, etc) and technical support
• Interaction with coworkers on design and layouts requirements
• Maintains compliance with contractual and regulatory obligations
• Complete assignments within scheduled milestones

Preferred Qualifications:
• Must be able to work in team environment
• Actively works to improve daily processes
• Maintains a current knowledge of development
• Will have a working knowledge of traditional drafting methods
• Excellent problem-solving skills and ability to work independently as well as communicate with team effectively

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Required – High School Diploma and 4 years of directly related experience
• Preferred – Associates Degree

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!




Apply Online Here: https://careers-moseleytechnical.icims.com/jobs/5282/facilities-cad-designer/job?mode=view
 
Job Number: 2018-5282
Job Location: Decatur, AL
Rate: BOE
Duration: 12 Months
Input Date: 02/01/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Detrom Garrett
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Financial Analyst (Secret Clearance)

Description:
Secret Clearance required.

Role Purpose
The Staff Accountant under the leadership of the Controller is responsible for the accurate and timely monthly general ledger closing process for the St Louis site and 3 administrative reporting units. The Staff Accountant must be able to work across departments and apply accounting principles, government regulations and company policy to prepare general ledger entries. This position will also be responsible for account reconciliations and analysis, preparation of monthly financial reporting and maintaining the fixed asset records.

DUTIES AND RESPONSIBILITIES:
• Primary responsibility and accountability for monthly close, including the preparation and rationalization of journal vouchers, ledgers and financial statements
• Evaluate, and apply internal controls to achieve accurate and efficient accounting systems and compliance with company, professional, and government accounting practices.
• Preparation of monthly general ledger account reconciliations and income tax accruals calculation
• Preparation and/or review of general ledger entries to record business transactions and evaluate to ensure accuracy and compliance with policies
• Maintain fixed asset schedules and record monthly depreciations
• Prepare monthly, quarterly and annual tax schedules
• Assist with annual physical inventory process
• Train support staff in functional areas of responsibility and on accounting systems.
• Assist in the development of policies and procedures to safeguard company assets and ensure transactions are recorded properly.
• Assist in special projects as needed.
• Interpretation and application of accounting and procurement standards and regulations.
• Responds to audit questions related to the accounting system raised by government agencies and other customers.
• Prepares and files excise, property, employment, income and miscellaneous tax returns, reports and claims.
• Pursue personal development of skills and knowledge necessary for the effective performance.
• Performs other duties, tasks and responsibilities as assigned.

EVMS background of understanding the various processes (work authorization, scheduling, EACs, budget change requests, etc) with the added expertise of being able to:

1. Meet with personnel to understand and document process flows
2. Edit/Write process documentation whether in the form of work/desktop instructions or the System Description itself
3. Ability to summarize process flows and develop “story boards” so that they are easily explained and understood by those not intimately involved in the process (ie, customers, DCMA auditors, etc.

***Creates and manages the cost/budget/actuals/forecast and works within the accounting systems.

Qualifications
DOD Secret Clearance is required.
Education:
• Bachelor degree in Accounting or Finance required.
Required:
• Minimum 2 years of experience of applicable work experience. Experience in public accounting and manufacturing experience preferred.
Additional Qualifications:
• Thorough knowledge of US GAAP accounting
• Working knowledge of Hyperion software preferred.
• Must be able to work with minimal supervision and is responsible to independently evaluate a broad range of critical decisions and present recommended actions to senior-level management.
• U.S. Person per ITAR regulations to comply with export compliance and site SSA requirements
• Excellent PC skills in Windows Suite
• Capable of working under pressure to meet deadlines
• Strong communication & interpersonal skills
• Strong organizational skills and process adherence skills
• Ability to manage cross functional project teams
• Unquestioned business ethics, honesty, and integrity
• Excellent PC skills in Windows Suite required.
• Experience with Business Planning Systems
• Prior experience in DoD or Aerospace
Clearance required: Secret
 
Job Number: 382789
Job Location: SEATTLE, WA
Input Date: 02/06/2018
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control DER

Description:
Position Purpose:
Responsible for the design, research and development of advanced new applications resulting in new product/business for the company.

Unique Skills:
• Flight Controls Software DER. Please see DER chart for additional details.
• This position will need the following delegations on FAA chart Systems and Equipment: D1, D2, D3 and D7.

Education and Experience Requirements:
• Bachelor's Degree in engineering, a related curriculum required or equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job.
• Fifteen (15) + year’s progressively responsible engineering exp in specific tech discipline with Bachelors. Exp credit considered for related adv degrees limited to 2 yrs Masters, 4 yrs PhD in fields applicable to this job. Requires approval of Eng PRB include bus justification.

Principle Duties and Responsibilities:
• Plans R&D programs and recommends technological application programs to meet corporate objectives
• Proactively promotes process initiatives that improve the balance of technical product, cost and schedule
• Applies cutting edge theories and technologies by exhibiting an exceptional degree of ingenuity, creativity and resourcefulness
• Champions and develops innovative principles and ideas
• Often acts independently and exercises wide latitude in determining objectives and approaches to critical assignments
• As a recognized expert in the field, provides consultative services to senior/executive leaders both within the company and the industry Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-228
Job Location: Savannah, GA
Rate: $135.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 04/11/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Software DER

Description:
Position Purpose:
Responsible for the design, research and development of advanced new applications resulting in new product/business for the company.

Unique Skills:
Flight Controls Software DER. Please see DER chart for additional details.

Education and Experience Requirements:
• Bachelor's Degree in engineering, a related curriculum required or equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job.
• Fifteen (15) + year’s progressively responsible engineering exp in specific tech discipline with Bachelors. Exp credit considered for related adv degrees limited to 2 yrs Masters, 4 yrs PhD in fields applicable to this job. Requires approval of Eng PRB include bus justification.

Principle Duties and Responsibilities:
• Plans R&D programs and recommends technological application programs to meet corporate objectives
• Proactively promotes process initiatives that improve the balance of technical product, cost and schedule
• Applies cutting edge theories and technologies by exhibiting an exceptional degree of ingenuity, creativity and resourcefulness
• Champions and develops innovative principles and ideas
• Often acts independently and exercises wide latitude in determining objectives and approaches to critical assignments
• As a recognized expert in the field, provides consultative services to senior/executive leaders both within the company and the industry Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-225
Job Location: Savannah, GA
Rate: $135.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 04/11/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Systems Engineer

Description:
The Flight Control Systems Engineer is responsible for (but not limited to) supporting the following:


• Design and test of Flight Control Systems (FCS) with embedded DO-178 software and DO-254 complex hardware, including Fly-By-Wire Flight Control Systems. Specifically the integrated hardware and software specification, design, implementation, and verification of a flight control system per the DO-178 and DO-254 standards.


• System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing in desktop simulation environment and systems integration labs, aircraft flight test, and aircraft/system qualification and certification


Bachelor’s Degree is required.
Major in Computer Engineering, Software Engineering, or Computer Science is preferred.
Bachelor’s Degree in Physics, Electrical, Aerospace, or Mechanical Engineering will be considered with sufficient software development experience.
Master’s Degree in the Engineering disciplines mentioned above is preferred.

Desired Skills

· Embedded DO-178 software
· MathWorks MATLAB / Simulink with Stateflow and Embedded Coder
C/C++ code
C# test scripts
· IBM Rational DOORS
· Serena Dimensions / PVCS
Git
 
Job Location: TX
Input Date: 02/06/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Candace
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Full-Stack Developer (U.S. citizenship required)

Description:
Full-Stack Developer (U.S. citizenship required)

Location: Centennial, CO
Pay Rate: Depends on Experience (DOE)
Duration: 6 month W2 contract
Shift: not specified
**MUST be a U.S. CITIZEN**

Summary:
As a full-stack developer, the ideal candidate will be responsible for building a new single page application for our CRE Dashboard project. We are seeking a talented developer who is self-motivated to work with our Certified Responsible Engineers (CRE’s) in developing new features to support their business needs.

Responsibilities Include:
• Work with Product Owner & key stakeholders to identify solutions that meet their needs
• Collaborate with business users and technology partners at all levels
• Provide direction for testing of new functionality
• Concept, storyboard, wireframe and prototype user experiences on web app
• True full stack development, exposure to front end and back end architecture
• Provide valuable insight into front end development best practices, trends and techniques

Job Requirements
REQUIREMENTS:
• Bachelor's degree in Information Science/Information Technology, Computer Science, Engineering or related experience.
• 5+ year’s software development experience.
• Experience in Java
• Experience in a modern web application framework (preferably Spring)
• Experience in writing SQL queries against relational database (preferably Oracle)
• Experience in a version control system (preferably GIT)
• Experience in a Linux or Unix based environment
• Exposure to production systems design including Performance, Efficiency and Security
• Exposure to query optimization and troubleshooting
• Exposure to effective data modeling within SQL
• Understanding of modern Microservice-based architectures and methodologies
• Exposure to REST and effective web service design
• Strong communication, decision-making, and problem-solving skills
• Deep knowledge of AngularJS practices and commonly used modules based on extensive work experience.
• Concept, storyboard, wireframe and prototype user experiences on web apps.
• Proficiency with testing tools (Karma, Jasmine).
• Ability to maintain a high level of attention to detail with flexibility to work independently and collaboratively
• Experienced in Agile methods using Scrum.
• JIRA experience or knowledge of preferred
 
Job Number: 8353
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 12/05/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Guidance, Nav & Ctrl Eng (3)-FL-C

Description:
Chipton-Ross is seeking 3 (three) Guidance, Nav & Ctrl Eng in Orlando, FL.

Description
Guidance, Navigation, and Control (GNC) engineer position. Responsibilities include, but are not limited to developing and analyzing GNC algorithms, Inertial Tracking / Target State Estimation algorithms, and Navigation algorithms using various simulations. Experience designing closed-loop control systems and missile autopilot algorithms is a big plus. Develop and test 6-DOF simulation models and simulation builds, and perform flight software verification / hardware-in-the-loop (HWIL) integration tests. Perform development and performance assessment in the context of Integrated Flight Simulation (IFS). The candidate should have a strong controls background and an understanding of Optimal State Estimation techniques using Kalman filters. Must have C/C++, and, MATLAB programming experience.

Skill/Experience/Education
Mandatory:
Bachelor's Degree, or higher, from an accredited University and at least three (3) years experience working GNC related assignments.

Desired:
RF/EO Modeling, Mission Planning, Common Simulation Framework (CSF), and / or Simulink and FORTRAN experience is a plus

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 166750
Job Location: Orlando, FL
Rate: $DOE
Duration: 12 months
Input Date: 12/05/2017
Last Updated: 09/24/2018
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Guidance, Nav & Ctrl Eng - Level 4 (3) - FL - C

Description:
Chipton-Ross is seeking a Guidance, Nav & Ctrl Eng - Level 4 (3) for an opening in Orlando, FL.

RESPONSIBILITIES:
Guidance, Navigation, and Control (GNC) engineer position. Responsibilities include, but are not limited to developing and analyzing GNC algorithms, Inertial Tracking / Target State Estimation algorithms, and Navigation algorithms using various simulations. Experience designing closed-loop control systems and missile autopilot algorithms is a big plus. Develop and test 6-DOF simulation models and simulation builds, and perform flight software verification / hardware-in-the-loop (HWIL) integration tests. Perform development and performance assessment in the context of Integrated Flight Simulation (IFS). The candidate should have a strong controls background and an understanding of Optimal State Estimation techniques using Kalman filters. Must have C/C++, and, MATLAB programming experience.
EDUCATION:
Bachelor's Degree, or higher, from an accredited University and at least three (3) years experience working GNC related assignments.

PREFERRED EXPERIENCE:
RF/EO Modeling, Mission Planning, Common Simulation Framework (CSF), and / or Simulink and FORTRAN experience is a plus

WORK HOURS:
9/80, 1st Shift, Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 166660
Job Location: Orlando, FL
Rate: Up to $65.62 DOE
Duration: 11 Months
Input Date: 11/29/2017
Last Updated: 09/24/2018
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
HVAC Engineer

Description:
HVAC Engineer

Cape Canaveral, FL
1 Year Contract
Pay Rate: DOE

Job Description / Responsibilities:

The Mechanical HVAC Engineer will produce moderately-complex technical designs and some analysis mechanical to new and existing facility related systems in support of ULA Atlas V, Delta IV and future Vulcan Launch Operations at Cape Canaveral Air Force Station Florida. The successful candidate, as part of ULA’s Engineering and Infrastructure Team, shall be required to produce accurate and detailed design drawings as well as generate validating system analysis calculations. He/she will gather information, perform field walk-downs, and create or revise electronic CAD files. Projects typically involve implementations being performed by external Contractors, in accordance with construction documents.

The successful candidate should have at least 15 years of relevant experience in designing, building, modifying, testing and maintaining commercial and industrial HVAC systems. Experience with chilled water and DX systems, ventilation and air distribution required. Engineer shall perform engineering thermodynamic, heat transfer and fluid/gas dynamic calculations. Apply knowledge of regulatory and certifying agency requirements to ensure product and/or service is in compliance. Apply knowledge of functional testing requirements to ensure product and/or service meets or exceeds customer expectations. Project support will also include generation of Statement of Work, Contractor contract documents for schedule integration, fabrication and installation phases. The successful candidate will be required to coordinate multiple construction activities and project schedules around launch activities. The successful candidate should be self-motivated and able to work productively without constant direct supervision. He/she will be given latitude to establish priorities, determine technical objectives and define the most efficient approaches to completing assignments. Some outside work climbing stairs and accessing ladders will be required. He/she may need to work at heights on launch structures and facility catwalks. The successful candidate shall be willing to support second/third shifts and weekends as required.

Skills:
This position requires expert knowledge of mechanical design, analysis and drafting practices and a sound practical knowledge of engineering principles, practices, and industry standards. At least 10 years of recent Autodesk AutoCAD experience. Other 3D modeling and design experience in Autodesk Revit or other Building Information Modeling (BIM) software is highly preferred.

Educational and Professional Qualifications:
A Bachelor’s degree from an accredited college in Mechanical Engineering and 15 years of applicable experience is preferred. A related discipline degree, or equivalent experience/combined education, with 10+ years of professional experience shall also be considered. Professional Engineering registration in the State of Florida is preferred, although not required.
 
Job Number: 8429
Job Location: Cape Canaveral, FL
Rate: DOE
Per Diem: Possible Split
Overtime: Exempt
Duration: 1 Year
Start Date: ASAP
Input Date: 12/19/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Process Development Engineer

Description:
Work Schedule

• Monday to Friday, 8-5



Scope of Position:

• Intermediate level process development engineer focused on advancing connectivity innovation.

• Responsible for technical development of new products/processes under some guidance from senior level engineers.

• Improving processes and solving problems based on fundamental understanding gained through the use of the scientific method and DOE.

• Reducing defects by eliminating root causes.

• Application of DMAIC and advanced statistical tools.

• Improving manufacturing cost, quality, uptime, yields, cycle time, and safety.

• Evaluating new raw materials, defining process parameters, and developing new processing equipment.

• Documenting experiment planning and process changes.



Day to Day Responsibilities:

• Design and develop new processes or improve existing processes at Corning facilities worldwide.

• Create operational ranges for parameters defined as a result of experimental development.

• Assist in the development of project plans and execute schedules to meet promised deliverables.

• Establish process development technical guideline.

• Work with local plant process experts and global SMEs on new processes innovation.

• Solve problems and improve processes based on fundamental understanding.

• Ensure that manufacturing requirements are properly developed and documented in conjunction with appropriate manufacturing, production, and engineering personnel.

• Provide information and technical assistance to manufacturing, engineering, and production personnel as required.

• Develop documentation for each project and work with associated plant personnel to implement it.

• Structured problem solving methods such as KT, Designed Experimentation, and Six Sigma.

• Implement Process Control and Process Discipline systems into manufacturing operations.

• Analyze process data using statistical tools (e.g. pareto, regression, time charting, analysis of variance, gauge R&R, etc.).

• Review and interpret data to make recommendations on immediate actions, long term corrective actions, follow-up experiments, etc.

• Troubleshoot equipment and processes.

• Document all new ideas for possible patent submission.



Required Skills

1. 3-5 years experienced in process development.

2. Proficient project management skills, including managing multiple projects simultaneously.

3. Advanced use of MS Office (Excel, Word, Project, PowerPoint)



Desired Skills

• Design products or manufacturing processes using CAD (Pro Engineer a PLUS)

• Problem solving – some level of experience in the use of DOE, SPC, Six Sigma and other process control/ analysis techniques.

• Capable of performing complex data analysis using MS excel (SPC), JMP, or Minitab software

• Familiar with fiber optic theory (a PLUS)

• Fluent in foreign languages: Spanish, Chinese, and Polish (a PLUS)



Education and Experience

• BS in an applicable engineering discipline.



Soft Skills

• Strong written and oral communication skills.

• Personal initiative and commitment.

• Organized with good planning and time management skills.

• Ability to build relationships within cross functional groups; team building skills, positive attitude, flexible and good work ethic

 
Job Number: 18-05399
Job Location: Fort Worth, TX
Rate: 45.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-02-18 00:00:00.0
Start Date: 2018-02-19 00:00:00.0
Input Date: 02/07/2018
Last Updated: 04/04/2018
Firm Name: NESCO RESOURCE
Attention: Anthony Kees
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Information System Security Officer (ISSO) with active secret / (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP) is required FL

Description:
7631875

Job Title: Information System Security Officer (ISSO)

Number of Positions: 1

Remaining Positions: 1

Duties:
** An active SECRET (or higher) DoD Security Clearance is required **



** A current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP) is required **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



-The ISSO is responsible for ensuring the appropriate operational security posture is maintained for an information system (IS) and as such, works in close collaboration with the Information System Security Manager (ISSM).

-The ISSO shall have the detailed knowledge and expertise required to manage the security aspects of an IS and is assigned responsibility for the day-to-day security operations of a system.

-Responsibilities also include physical and environmental protection, personnel security, incident handling, and security training and awareness.

-In close coordination with the ISSM, the ISSO plays an active role in monitoring a system and its environment of operation to include developing and updating the System Security Plan (SSP), managing and controlling changes to the system, and assessing the security impact of those changes.



Responsibilities of the ISSO include, but are not limited to:

a. Ensure systems are operated, maintained, and disposed of in accordance with security policies and procedures as outlined in the security authorization package;

b. Attend technical and security training (e.g., operating system, networking, security management) relative to assigned duties;

c. Ensure all users have the requisite security clearances, authorization, need-to-know, and are aware of their security responsibilities before granting access to the IS;

d. Report all security-related incidents to the ISSM;

e. Conduct periodic reviews of ISs to ensure compliance with the security authorization package;

f. Serve as member of the CCB, if designated by the ISSM;

g. Coordinate any changes or modifications to hardware, software, or firmware of a system with the ISSM prior to the change;

h. Formally notify the ISSM when changes occur that might affect system authorization;

i. Monitor system recovery processes to ensure security features and procedures are properly restored and functioning correctly;

j. Ensure all IS security-related documentation is current and accessible to properly authorized individuals;

k. Ensure audit records are collected and reviewed; and

l. ISSO shall be adequately trained and possesses technical competence commensurate with the complexity of the ISs.

Skills:
Minimum Qualifications

- Current SECRET (or higher) DoD Security Clearance

- Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)

- Experience with Microsoft Windows and/or Linux system administration (2+ years)

- Familiarity with configuration control and change management (SCCM)

- Experience with networking concepts (switches, network security, TACLANE)

- Experience with security concepts (Data Loss Prevention, Active Directory, and Security Log Analysis)

- Active and continuous learner - either higher education or Continuing Professional Education



Required Competencies

- Strong written and verbal communication skills; ability to present reports to management; motivated to thoroughly investigate, analyze, and document system issues and resolutions

- Ability to produce quality deliverables and to complete assigned projects on time; provides consistent status updates to ensure IT security projects stay focused

- Consistent attention to detail - completes tasks per standard operating procedures; reports discovered anomalies and inconsistencies

- Persistent and creative problem solver - strong troubleshooting skills and determined to find solutions to technical problems; identifies root cause and presents possible solutions to management

- Strong work ethic and a proven professional - respectful, dependable, takes initiative and follows through, dedicated to excellence and getting the job done



Preferred Competencies

- Operating System and networking certifications

- Knowledge of and experience with compliance to government regulations and standards (NIST Special Publications, NISPOM, Risk Management Framework, etc.)

- Direct experience with a Department of Defense (DoD) or Defense Industrial Base (DIB) company supporting critical information systems



Additional Details

The ideal candidate for this position must be able to:

- Report to work on time

- Perform job duties for a specific duration of time or within a given period of time

- Follow directions based on government requirements and company policies

- Interact well with co-workers and customers

- Accept constructive criticism

- Maintain regular/consistent attendance and a full-time schedule

- Maintain current status on projects

- Stay current on training requirements

- Solve issues and incidents in the field and be willing to work after hours as needed to complete an urgent and important task

- Effective service depends upon the contractors performing duties to the best of their abilities; frequent absences will disrupt business operations and create additional work for coworkers; prompt and regular attendance is critical to the success of the company's mission.



Education:
- Undergraduate degree in Information Technology or Cyber Security, but candidate with proven experience will not be excluded from consideration

- Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)



Languages:
English Read Write Speak
Certifications & Licenses:
CISA
CISM
CISSP
Security+

Skills:
Required
CISMCISSPDODBUSINESS OPERATIONSCISA
Additional
NETWORKINGNISTOPERATIONSPASSPORTPROBLEM SOLVERRISK MANAGEMENTSECURITYSECURITY PLANSECURITY POLICIESSOLUTIONSSYSTEM SECURITYTRAININGACTIVE DIRECTORYAUDITCHANGE MANAGEMENTCYBER SECURITYDATA LOSS PREVENTIONDOCUMENTATIONEXCELLENT WRITTEN AND VERBAL COMMUNICATION SKILLSFIRMWAREISSLINUXLOSS PREVENTIONMICROSOFT WINDOWSNETWORK SECURITYSYSTEM ADMINISTRATIONSYSTEMS ADMINISTRATIONTRADING

Minimum Degree Required: Master's Degree

State/Province: Florida
City/Town: Jupiter

Start Date: 01/08/2018 Hours Per Week: 40.00
Est. End Date: 06/29/2018 Hours Per Day: 8.00
Schedule Notes: Days Per Week: 5.00
 
Job Number: MB-7631875
Job Location: Jupiter, FL
Rate: 72/hr max
Per Diem: no
Duration: 6 month contract
Input Date: 04/20/2018
Last Updated: 05/18/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Infrastructure Engineer -Secret Clearance

Description:
PDS Tech, Inc is seeking a candidate for the Infrastructure Engineer- Secret Clearance position located in Aurora, CO.  
You will be responsible for deploying and integrating scripts and recipes to automate Systems configurations and COTS configurations in complex server environments.
These environments, a mix of servers, workstations, and custom hardware, provide the backbone for the operational system of a critical, strategic national asset.
The environments also support product development, testing, and maintenance.
The candidate would be responsible for implementation of automation recipes (Chef) and scripts (Ruby, PowerShell, Python and others) as part of an automated installation process.
The ideal candidate will be a self-starter, have an engineering mindset, and be able to troubleshoot complex problems.
This position may require some on call support and overtime as well as limited (<20%) travel for installation and troubleshooting support.
US citizenship is required due to the candidate needing a current US secret security clearance.
Requirements:
•Must possess an active US DoD Secret or higher clearance US Citizenship
•For G09 = 6+ years of relevant Infrastructure/IT experience related to system installation and configuration
•Background in Systems Operations environment supporting complex environment deployment and management activities
•Experience with automation tools such as Chef (preferred), Puppet, Ansible, SaltStack, Fabric or similar products for O/S builds, software installation and configuration •Hands-on experience with virtualization tools and cloud computing, either private (VMware, OpenStack) or public (AWS)Systems integration experience
•Ability to troubleshoot complex configuration problems or system issues
•Experience with Windows or Linux System Administration
•Strong scripting skills (i.e. PowerShell, Python, Ruby, bash, etc.) •
Ability to communicate clearly and effectively both written and oral

Desired Skills:
•Experience with orchestration tools – Rundeck, VMware Orchestrator
•Understanding of Infrastructure as Code and demonstrated implementation
•Understanding of DevOps concepts •Experience with VMware– vCenter, ESXi, vSphere
•Understanding of Change Management processes - Version Control of software and code - GIT, CVS •The ability to effectively plan their own work up and the work of others on the team\

Required Education:
Bachelor Degree in Information Systems, Information Technology, Management Information Systems, Computer Science, Computer Engineering, Computer Information Systems, Computer Systems Engineering and six years of related work experience or equivalent combination of education and experience (technical Bachelor Degree = additional 8 years of related work experience).
 
Job Number: 1710077409
Job Location: Aurora, CO
Duration: 12 months
Input Date: 11/09/2017
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jason Andrzejewski
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023QJBAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integrated Fluid Systems Propulsion/Mechanical Contract

Description:
IFS (Integrated Fluid Systems) Propulsion/Mechanical Contract

Location: Denver, CO
Pay Rate: DOE
Duration: 1 year W2 contract
Shift: not specified, exempt OT
**MUST be a U.S. CITIZEN**

Job Description
1. Contract Labor job description
a. Required: Mechanical or Aerospace engineering degree (BS) or equivalent
b. Required: Experience in the design, operation and/or control of pneumatic systems or cryogenic fluid systems that are used to transfer liquid nitrogen, liquid oxygen, liquid hydrogen and/or liquid natural gas.
c. Required: Experience working in a team environment
d. Required: Excellent communication skills
e. Optional: Experience in testing and debugging software
f. Optional: Experience with launch vehicle design and/or operation
g. Optional: Experience with developing requirements/procedures for automated operations
2. Expected deliverables
a. The following are the deliverables in support of the Common Avionics Integrated Fluid Systems Development and Qualification:
i. Verification that the ground system software meets all operational requirements for the Propulsion Systems
ii. Real time troubleshooting where software deficiencies are detected during system simulations conducted with the software team
 
Job Number: 8434
Job Location: Denver, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 12/19/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Checker IV - (AZ)

Description:
Lead Checker Position / Must have extensive checking experience / Must be highly skilled in CATIA & Industry Standards.

Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: CheckerAZ
Job Location: Mesa, AZ
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 02/02/2018
Last Updated: 03/09/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison MRB / Product Review Engineer III (OH)

Description:
Active Secret Clearance, NOT REQUIRED to start.

Applies knowledge of Boeing design principles to assess and resolve product/process issues in the repair and manufacturing testing of electronic circuits and electrical assemblies for the Electronics program. Analyzes, conducts root cause analysis and develops dispositions for design non-conformances. Applies engineering principles to research technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions. Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution. Develops and implements product/process improvements. Ensures supplier and build partner compliance with Boeing standards. Develops customer correspondence for continued safe operation and maintenance of equipment.

Expected Duties
Reviewing and evaluating functional and performance test data for electrical and electronics circuits and electrical assemblies against their acceptance criteria. Troubleshoot electronics and electrical assemblies and identify defects to next subassembly. Disposition defects for appropriate repairs and rework.
Collect and evaluate data on customer findings for product/process improvement opportunities that may include recurrent product support issues.
Participates in Material Review Boards and Integrated Product Teams (IPTs). Provide Engineering support for material review activities on electronic and electronic components by performing Engineering investigation of requirements traces, generating supplier statement of work documents for vendor repair, resolving technical issues at vendors, coordinating technical activities with multifunctional teams.
Lead the technical evaluation of vendors proposed plans by reviewing vendor acceptance test procedures for compliance to requirements and review of vendor rework findings to determine if failure has been verified.

Must be capable of utilizing: schematics, software descriptions, historical data, electronic and electrical device functional descriptions, technical manuals, automated test equipment, standard lab equipment.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

ACS Group (formerly 'Comforce')
 
Job Number: MRBoh
Job Location: Heath, OH
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 01/24/2018
Last Updated: 03/23/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Responsibilities include but are not limited to the following: 



  • Develop tooling and machine design concepts and support Tool and Machine Design Engineers in creating 3D models and drawings in TcUA (Product lifecycle management system) 

  • Insure models and drawings meet all department standards and customer requirements. 

  • Present models and drawings in design reviews to ensure safety, quality, delivery, cost objectives and customer satisfaction with design from all team members. 

  • Manage multiple projects and customers while creating efficient designs to meet the program cost and schedule requirements. 

  • Work with internal customers to concept needed support equipment for new and existing programs. 

  • Work closely with Tool and Machine Design Engineers to create final drawings and meet design costs and schedules. 


 


Requirements: 



  • 4 year BS Design and Drafting or equivalent experience 

  • Working knowledge of GD&T. 

  • Familiar with machine design and aircraft tooling. 

  • Experience with model checking for accuracy and model integrity. 

  • Experience with creating drawings. 

  • CATIA V5, TcUA, NX or other 3D modeling software a plus. 


 


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 


 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: O6820283
Job Location: Clearfield, UT
Rate: 40-50
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintainability Eng III

Description:
Maintainability Eng III
Savannah, GA
Rate: $58-$63

Unique Skills:

Prior experience in development of Maintainability Predictions and analysis per MIL-HDBK-472, Human Engineering Design Guidelines per MIL-HDBK-759, Mean-Time-To-Repair (MTTR), assessing aircraft modifications for Maintainability impacts, CATIA V5 including Human Builder & Kinematics, and Reliasoft reliability & maintainability software are desired. Candidates with prior US military aircraft maintainer or air crew experience strongly preferred.


Education and Experience Requirements:

Bachelors degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience sufficient to perform the essential functions of the job. A&P license preferred. Six (6) years of Maintenance Programs/Maintainability experience or aircraft maintenance and operational experience.

Position Purpose:

Responsible for participating in the planning, development, and sustainment of Company Aircraft Maintenance Programs and related issues regardless of complexity.

Principal Duties and Responsibilities:

Essential Functions: 1. Share responsibility for planning, developing, and sustainment of new and existing Aircraft Maintenance Programs and engineering projects of major complexity within established scope, meeting requirements of FAR 25.1529 or other applicable regulatory directives. 2. Maintain a current knowledge of developments in the field of specialty and/or other related aircraft fields and provide recommendations to department management for process/procedure changes to prepare for new standards and implementation of new methodologies. 3. Meet cost and schedule requirements while ensuring accuracy and consistency. 4. Develop standards and guides to support Maintenance Programs activities. 5. Mentor other team members in areas relative to Maintenance Programs processes and procedures. 6. Engage with internal/external stakeholders to ensure department deliverables are being met or exceeded. 7. Recommend innovations that improve collaboration, communication, quality, and/or effectiveness of product. 8. Review, and provide feedback on written work of team members. 9. Perform other duties as assigned.

Other Requirements: 1. Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.
 
Job Number: 8313
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/27/2017
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintainability Engineer

Description:
Position Purpose:
Responsible for participating in the planning, development, and sustainment of Aircraft Maintenance Programs and related issues regardless of complexity.

Unique Skills:
• Prior experience in development of Maintainability Predictions and analysis per MIL-HDBK-472, Human Engineering Design Guidelines per MIL-HDBK-759, Mean-Time-To-Repair (MTTR), assessing aircraft modifications for Maintainability impacts, CATIA V5 including Human Builder & Kinematics, and Reliasoft reliability & maintainability software are desired.
• Candidates with prior US military aircraft maintainer or air crew experience strongly preferred.

Education and Experience Requirements:
• Bachelor’s degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience sufficient to perform the essential functions of the job. A&P license preferred.
• Six (6) years of Maintenance Programs/Maintainability experience or aircraft maintenance and operational experience.

Principal Duties and Responsibilities:
• Share responsibility for planning, developing, and sustainment of new and existing Aircraft Maintenance Programs and engineering projects of major complexity within established scope, meeting requirements of FAR 25.1529 or other applicable regulatory directives.
• Maintain a current knowledge of developments in the field of specialty and/or other related aircraft fields and provide recommendations to department management for process/procedure changes to prepare for new standards and implementation of new methodologies.
• Meet cost and schedule requirements while ensuring accuracy and consistency.
• Develop standards and guides to support Maintenance Programs activities.
• Mentor other team members in areas relative to Maintenance Programs processes and procedures.
• Engage with internal/external stakeholders to ensure department deliverables are being met or exceeded.
• Recommend innovations that improve collaboration, communication, quality, and/or effectiveness of product.
• Review, and provide feedback on written work of team members.
• Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.
 
Job Number: 24-219
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 03/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (15 plus needed)

Description:
Unique Skills:
• Catia V5, SAP and Solumina experience.

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Three (3) years Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-206
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 03/19/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Savannah, GA
Rate: $50-$55
Long Term contract
1st Shift



Unique Skills:
Knowledgeable with CATIA, SAP, Solumina software programs. Aircraft experience with aircraft shop support and creating work instructions.


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 8217
Job Location: Savannah, GA
Rate: $50.00 -$55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/21/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Fort Worth, TX
1 Year Contract
Pay Rate: $48.25/Hr

Job Description:

• Report to a design lead on the 1018 program
• Perform and/or oversee aspects of engineering standard work throughout Preliminary Design, Detail Design, and Verification/Validation
• Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements
• Must be fluent with detailed part and assembly definition (FTA) using Catia V5
• Ensure accuracy and adherence to Product Definition Standard Work in the communication of Design Intent through duties which includes: o Understand, apply and interpret Geometric Form Control to ASME Y14.5 & ASME 14.41 standards o Create / review parametric 3D models and other definition files to Design intent and Product Definition standard work using the Catia V5 software
• Types of hardware include products such as. o Hydraulic actuators o Oleo-Pneumatic shock struts (single and dual stage) o Landing gear assemblies o System routings (electrical and hydraulic)
• The engineer will create detail design, developmental and production mechanical documentation such as detail drawings, assembly drawings, engineering change incorporations as part of Technical Data Packages in accordance with contractual specifications and UTAS policies
• Product definition includes: o Associated parts list o Detailed part and assembly definition
• Experience with SMARTEAM PDM & MATRIX ONE for the approval and release of part definition and engineering changes (configuration management)
• Support drawing release schedule.
• Assist with driving improvements and harmonizing Acceptance Test Procedures using MS Word/MS Excel
• Drive improvements into daily activities, striving for right the first time and on time all the time (LEAN principles)
• Kinematics analysis using Catia V5
• Weight impact
• Tolerance stack-up evaluation

Basic Qualifications:

• ***BS in Mechanical or Aerospace Engineering***
• 10+ years design experience with a background in kinematics, mechanics and aeronautics.
• Proficient in Catia V5 detailed modeling (kinematics and systems routings a plus) and FTA generation, layouts and checking experience.
• Working knowledge of materials and surface treatments.
• Strong communication skills.
• US citizen, permanent resident alien or able to review all export-controlled technical information.
• Knowledgeable of hydraulic actuator/system design, forgings, layouts, mechanical system and structural design (fatigue and static).
• Proficient with GD&T (ASME Y14.5, ASME Y14.100 and Y14.41).
• Landing gear and/or hydraulic actuator design experience.
• Open minded, pro-active, quick learning ability and strong desire to learn
• Experience using SMARTeam – PDM
• Experience using MATRIX ONE – PLM
 
Job Number: 8507
Job Location: Fort Worth, TX
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 03/12/2018
Last Updated: 03/12/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 3

Description:
Location: Lexington, KY
Rate: $60.00 - $71.00/HR
Duration: 9 month contract position
Shift: 1st Shift

******MUST have an Active Secret Clearance or to have had one within the last 2 years******

Job Description:
******MUST have an Active Secret Clearance or to have had one within the last 2 years******
This job involves designing modifications for post production C-130 and potentially other fixed-wing aircraft by designing installations, integrations, modified parts, assemblies, and systems based on customer specifications. This position will interpret customer requirements then research, develop and document mechanical designs using applicable military specifications, ANSI/ASME or related design and drafting standards.

Skill/Experience/Education
Mandatory:
- Familiarity with ANSI/ASMEY14.100 or similar design and drafting standards
- 4+ years of experience with Catia V5 3D parametric modeling and drafting
- 4+ years of experience with Structural component and assembly design
- Perform detailed drawing checks and be responsible for completion of production ready drawings
- Ability to work under little or no direct supervision
- Demonstrated previous success working in a team based environment to meet objectives

Desired:
******MUST have an Active Secret Clearance or to have had one within the last 2 years******
- Any familiarity with structure of C130 aircraft, specifically C130J
- Air Force customer experience
- Experience or familiarity with engineering change documentation
- Experience with Teamcenter PLM software

.
 
Job Number: 8433
Job Location: Lexington, KY
Rate: $60.00 - $71.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 04/23/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineers - Lexington, KY

Description:
STS AeroStaff Services is hiring Mechanical Design Engineers in Lexington, Kentucky.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• This job involves designing modifications for post-production C-130 and potentially other fixed-wing aircraft by designing installations, integrations, modified parts, assemblies, and systems based on customer specifications
• This position will interpret customer requirements then research, develop and document mechanical designs using applicable military specifications, ANSI/ASME or related design and drafting standards

Basic Qualifications:

• Must have active clearance
• Familiarity with ANSI/ASMEY14.100 or similar design and drafting standards
• Experience with Catia V5 3D parametric modeling and drafting
• Perform detailed drawing checks and be responsible for completion of production ready drawings
• Ability to work under little or no direct supervision
• Demonstrated previous success working in a team based environment to meet objectives

Preferred Qualifications:

• Any familiarity with structure of C130 aircraft, specifically C130J
• Air Force customer experience
• Experience or familiarity with engineering change documentation
• Experience with Teamcenter PLM software
• Active DoD secret clearance

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41479
Job Location: Lexington, KY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/12/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer

Description:
Job Title: Mechanical Designer



Major purpose: In this dynamic role you'll use 3-Dimensional (3D) CAD software to design electro-mechanical components and create detail drawings, assembly drawings, sketches & diagrams. You must be familiar with ASME drafting and drawing practice, and good with maintaining documents and files using PLM software.



Major functions: Your Day To Day Responsibilities:

• Use computer assisted design/drafting (CAD) equipment and software (Inventor) to develop mechanical and electro-mechanical solutions using standard industry principles for product design.

• Design mechanical and electromechanical assemblies using design for manufacturing (DFM), design for assembly (DFA) principles.

• Create and revises production electro-mechanical drawings (assembly drawings with details).

• Generate mechanical drawings for use in sheet metal, machining and weld operations.

• Make finished drawings, checks dimensions of parts, materials to be used, and component relationships. Sketches rough layout of design concept and computes angles, weights, surface areas, dimensions, radii, clearances, tolerances, leverages and location of holes. Draft detailed multiview drawings of assemblies and products. Draws finished designs from sketches utilizing solid models and layouts.

• Utilize knowledge of various machines, engineering practices, mathematics, raw materials, processes and other physical sciences to complete drawings.

• Update Drafting / Engineering Standards, make source control drawings.

• Create and process engineering change notices.

• Troubleshoot and evaluate mechanical and electromechanical product manufacturing issues. Revise documentation as needed.

• Communicate with QA, Engineering, Vendors, Buyers and Manufacturing departments regarding new and revised drawings.

• Build BOMs (Bill of Materials), resolve manufacturing issues, and implements ECRs and ECOs (Engineering Change Requests, Engineering Change Orders).

• Travel and working off-site at another location may be required.

Technical/Functional skills:



Education/Experience/Licenses etc.: Your Education/Experience Includes:

• 5-10+ years of experience working with the design and manufacture of electro-mechanical products using 3D CAD software (Inventor).

• Knowledge of military standards and specifications is a plus.

• Associates Degree or College Degree preferred.

• Mechanical aptitude with ability to complete mathematical calculations - plane and solid geometry and trigonometry, fractions, percentages, ratios, proportions and measurements.

THIS POSITION DOES NOT OFFER RELOCATION ASSISTANCE



 
 
Job Number: 18-02961
Job Location: Ayer, MA
Rate: 39.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2018-05-31 00:00:00
Start Date: 2018-01-29 00:00:00
Input Date: 01/19/2018
Last Updated: 02/26/2018
Firm Name: NESCO RESOURCE
Attention: Brandon Taheri
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer

Cape Canaveral, FL
1 Year Contract
Pay Rate: DOE

Job Description / Responsibilities:
The Mechanical Engineer will produce moderately-complex technical designs and some analysis mechanical / structural modifications to new and existing facility related systems in support of ULA Atlas V, Delta IV and future Vulcan Launch Operations at Cape Canaveral Air Force Station Florida. The successful candidate, as part of ULA’s Engineering and Infrastructure Team, shall be required to produce accurate and detailed design drawings as well as generate validating stress analysis calculations. He/she will gather information, perform field walk-downs, and create or revise electronic CAD files. Projects typically involve implementations being performed by external Contractors, in accordance with construction documents. Project support will also include generation of Statement of Work, Contractor contract documents for schedule integration, fabrication and installation phases. The successful candidate will be required to coordinate multiple construction activities and project schedules around launch activities. The candidate shall possess and apply knowledge and technical expertise to the design, analysis, and maintenance of facility related mechanical and electromechanical products and systems. The successful candidate should have at least 10 years of relevant design and analysis experience in building and/or modifying large industrial facility mechanical systems. The desired experience shall be in the following areas; water piping and plumbing, mechanical hydraulic systems, fire protection systems and light structural design. A smaller percentage of the work will involve the design and analysis of facility HVAC systems and mechanical components of support equipment and facility platform systems.

Skills:
This position requires knowledge of predominantly mechanical design, analysis and drafting practices and a sound practical knowledge of engineering principles, practices, and industry standards. At least 10 years of recent Autodesk AutoCAD experience. He/she shall have analysis experience using STAAD and/or RISA, Femap – NX Nastran and be able to create stress calculations by hand with Excel or MathCAD. Other 3D modeling and design experience in Autodesk Inventor, Autodesk Revit or other Building Information Modeling (BIM) software is highly preferred.

Educational and Professional Qualifications:
Bachelors degree from an accredited college in Mechanical Engineering is preferred. A related discipline degree, or equivalent experience/combined education, with 10+ years of professional experience. Professional Engineering registration in the State of Florida is preferred, although not required.
 
Job Number: 8430
Job Location: Cape Canaveral, FL
Rate: DOE
Per Diem: Possible Split
Overtime: Exempt
Duration: 1 Year
Start Date: ASAP
Input Date: 12/19/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Mechanical Engineer

Description:

PDS Tech, Inc. is seeking a Mechanical Engineer for a position located in Kansas City, MO. 
Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

The Client's organization has several open opportunities for Mechanical Engineers.  We are seeking engineers who are interested in supporting one or more of the following areas:  product engineering, process engineering, purchased product engineering, systems engineering and mechanical testing.  Job title will be commiserate with level of experience. 

 
  • Completes assignments and provides detailed instructions in the design and/or project management of new and current projects, products, programs, components, tools and acceptance equipment under technical guidance of higher level engineers or departmental management
  • Participates in establishing operating procedures on new products and components
  • Assists in the development of test procedures and performance of routine to moderately complex engineering evaluation tests, product and process capability studies, quality audits, product or project data reviews, and other engineering evaluation work
  • Evaluates opportunities for defect prevention based on standard or accepted solutions
  • Prepares evaluation reports, analyzes discrepancies, and makes recommendations for product, test equipment, procedures and manufacturing or operating processes that improve productivity and quality and reduce flowtime
  • Assists in the preparation of product or project definitions, manufacturing drawings and specifications, and test equipment designs
  • Defines and acquires tooling, gaging and other equipment necessary to manufacture parts and to assure product quality
  • Interacts with design agencies, suppliers and/or internal organizations such as the Integrated Supply Chain to assist in resolving design, development, production and acceptance issues
  • Provides technical assistance in appropriate assigned field
  • Evaluates and makes recommendations regarding technological advances that improve productivity and quality,reduce flowtime, and enhance operational surety
  • May perform other duties as required
  • Conducts activities in a safe and healthy manner and works in accordance with established ES&H requirements to ensure the protection of associates, the public, and the environment. Takes actions necessary to stop work when an unsafe condition or action is identified. Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

Basic Qualifications: 
  • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
  • Bachelor of Science degree in Mechanical Engineering from an ABET accredited program or an equivalent ABET accredited engineering degree.
  • Minimum three (3) years of professional technical experience.
  • Proficiency in Microsoft Excel, Word and PowerPoint required

Additional Qualifications: 

  • Hands-on experience with 3D design software like Creo or SolidWorks
  • Effective verbal, written and presentation skills
  • Knowledge of continuous improvement methodologies including Six Sigma
  • Previous experience in a manufacturing environment
  • Experience in engineering related administrative activities such as configuration management, financial reporting, product testing procedures & data entry preferred
  • Proven ability in decision making and organization, planning and problem solving skills
  • Ability to work under minimal supervision, with latitude for independent action and decision making.
  • Good people skills, ability to motivate teams to produce on-target and timely results.
  • Demonstrate project/program management via multiple priorities/projects
  • Ability to plan and organize, demonstrate excellent time management and support several projects at once
  • Willingness to travel on occasion

 
Job Number: 1710068729
Job Location: KS City, MO
Duration: 6 months
Input Date: 05/26/2017
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tanya James
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002JrH0AAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer – Robotics – Automation

Description:
Mechanical Engineer – Robotics – Automation

Location: Seattle, Washington 98103

Terms: 4 Open Positions – Long Term Contract Employment – Direct or Perm is an Option!

As our operations continue to grow, its becoming ever more important to automated our infrastructure for deploying and operating at scale. We have developed a portfolio of automation projects that span manufacturing, supply chain, and datacenter operations. We are looking for motivated professionals with experience designing complex automated systems in CAD. From component level detail to factory layout and optimization.

Requirements:

Minimum 10+ years professional experience in CAD Design
Solidworks, AutoCAD, Creo/ProE computer aided design systems
Layout planning and optimization
Geometric Dimensioning and Tolerancing
Nice to Haves:

Minimum 2+ years developing robotic, mechatronic, or material handling systems in a field related to manufacturing or logistics
Certification: CSWA, CSWP, CSWE, CPPA, ACP
Controls systems
Statistical modeling
Understanding Robot kinematics and Work Envelope
Material control dynamics and principles
Rate and systems throughput modeling
Top 3 Daily Responsibilities:

Work with senior engineering staff to define product specifications.
Use CAD software such as AutoCad, Inventor, Solidworks, or ProE to design building scale automation systems, components, robotic work cells
Document design details and make schematic drawings for contracting components from suppliers.
Overall Responsibilities:

You will work with Automation Systems team to define product specifications for robotics, autonomous vehicles, and material handling systems.
Convert those specifications to virtual models in Solidworks, Autodesk, or ProE computer aided design software.
Generate design details and schematic drawings from the virtual models for contracting from our supply base.
Test and measure components and systems to ensure they meet design standards.
Education Requirements:

B.S. in Mechanical Engineering (or equivalent engineering degree could be acceptable).

Without a degree, candidate would be possible with trade certification in certified Solidworks professional (CSWP) or expert (CSWE)
 
Job Number: 376336
Job Location: Seattle, WA
Rate: 62.00
Per Diem: No
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 03/26/2018
Firm Name: CDI CORPORATION
Attention: Kris Douglas
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
N/C Programmer - (WA)

Description:
Provides numerical control, machining and programming technical experience. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for a complete spectrum of numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction. NC Programmer with the following skills:
1. 1+ year experience using MetrologXG version software to program Coordinate Measurement Machine (CMM)
2. Preferred: Experience programming dual armed CMM using Metrolog software
3. Skilled in knowledge and interpretation of Geometric Dimension and Tolerancing (GDT)
4. 2+ years working with CATIA (or other Model Based Definition (MBD) software to access released engineering models and interrogate them for GDT and calculated measurements

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience. 1+ year experience using MetrologXG version software to program Coordinate Measurement Machine (CMM). Preferred: Experience programming dual armed CMM using Metrolog software.

ACS Group (formerly 'Comforce')
 
Job Number: NCpuyallup
Job Location: Puyallup, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/10/2018
Last Updated: 05/11/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer (Active Secret Clearance Required)

Description:
Job Type: W2 - Contract

Job Duration: 1 Year with possible extension

Program: Air Force - Long Range Strike Bomber Program (LRS-B) - B-21 Raider

Work Authorization: Active Secret Clearance issued by the Department of Defense is REQUIRED and the last investigation must have been completed within the past 6 years to be eligible for the Special Access Clearance for this program (SAP)

Hourly Rate: Dependent on Experience, Negotiable

Per Diem: Available for eligible applicants

Bonus: 1 week's pay - 20% paid after 1st two weeks, remaining 80% paid out at the end of the project or 6 months, whichever comes first

Holiday Pay: 6 Paid Holidays - (New Year’s Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day)


Manager Notes:
Manager would like contractor to start anytime between 2/16/18 and 3/30/2018. May be able to start prior to Program Clearance. More than likely will target start date 6 weeks after offer acceptance.
REQUIRED ACTIVE DAY ONE DOD SECRET CLEARANCE WITH RECENT INVESTIGATION (WITHIN THE LAST 6 YEARS)

Description:
Provides numerical control, machining, and programming technical expertise to cross-functional engineering and manufacturing teams. Establishes technical requirements for manufacturing and producibility.
Plans, creates, verifies, and revises machine control data and documentation that directs the operations for numerically controlled machines and robots required to manufacture and inspect parts, tools and assemblies.
Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, and software.
Apply knowledge of engineering data, geometric dimensioning and tolerancing, and machine control languages in order to plan, create and revise machine-control data and associated inspection plans.
Ability to create and revise measuring machine programs and/or computer generated solid models, statistical process-control graphic aids, in-process inspection graphic aids, and key characteristics media.
Ability to create and/or validate machine-control data, inspection point coordinate data and documentation

Requirements:
REQUIRED ACTIVE DAY ONE DOD SECRET CLEARANCE WITH RECENT INVESTIGATION (WITHIN THE LAST 6 YEARS)
Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience.
Required: Trim and Drill Experience
 
Job Number: S579046
Job Location: Wichita, KS
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/08/2018
Last Updated: 05/21/2018
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer (WA)

Description:
NC Programmer provides numerical control, machining and programming technical experience. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for a complete spectrum of numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction. NC Programmer with the following skills. Experience using MetrologXG version software to program Coordinate Measurement Machine (CMM) Preferred: Experience programming dual armed CMM using Metrolog software Skilled in knowledge and interpretation of Geometric Dimension and Tolerancing (GDT) 2+ years working with CATIA (or other Model Based Definition (MBD) software to access released engineering models and interrogate them for GDT and calculated measurements AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: NCpuyallup
Job Location: Puyallup, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/30/2018
Last Updated: 02/23/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer - Level 3 (OK)

Description:
Provides numerical control, machining, and programming technical expertise to cross-functional engineering and manufacturing teams. Establishes technical requirements for manufacturing and producibility.

Plans, creates, verifies, and revises machine control data and documentation that directs the operations for numerically controlled machines and robots required to manufacture and inspect parts, tools and assemblies.

Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, and software.

Apply knowledge of engineering data, geometric dimensioning and tolerancing, and machine control languages in order to plan, create and revise machine-control data and associated inspection plans.

Ability to create and revise measuring machine programs and/or computer generated solid models, statistical process-control graphic aids, in-process inspection graphic aids, and key characteristics media.

Ability to create and/or validate machine-control data, inspection point coordinate data and documentation.

Education/Experience:
Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience.

Must be available to work any shift
OT is as needed
Phone interviews will be conducted

SKILLS NEEDED:
SmartCam is needed
Strong 3/4 axis experience
Catia V5 is helpful but not needed
SAP is helpful but not needed

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-580985OK
Job Location: McAlester, OK
Rate: $50.00/HR
Per Diem: Yes - Possible - plus possible split
Overtime: Yes, as needed
Duration: 6 Months or longer
Start Date: 02/16/2018
Input Date: 02/05/2018
Last Updated: 02/16/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer - Level 3 (OK)

Description:
Provides numerical control, machining, and programming technical expertise to cross-functional engineering and manufacturing teams. Establishes technical requirements for manufacturing and producibility.

Plans, creates, verifies, and revises machine control data and documentation that directs the operations for numerically controlled machines and robots required to manufacture and inspect parts, tools and assemblies.

Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, and software.

Apply knowledge of engineering data, geometric dimensioning and tolerancing, and machine control languages in order to plan, create and revise machine-control data and associated inspection plans.

Ability to create and revise measuring machine programs and/or computer generated solid models, statistical process-control graphic aids, in-process inspection graphic aids, and key characteristics media.

Ability to create and/or validate machine-control data, inspection point coordinate data and documentation.

Education/Experience:
Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience.

Must be available to work any shift
OT is as needed
Phone interviews will be conducted

SKILLS NEEDED:
SmartCam is needed
Strong 3/4 axis experience
Catia V5 is helpful but not needed
SAP is helpful but not needed

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-580985OK
Job Location: McAlester, OK
Rate: $50.00/HR
Per Diem: Yes - Possible - plus possible split
Overtime: Yes, as needed
Duration: 6 Months or longer
Start Date: 03/09/2018
Input Date: 03/01/2018
Last Updated: 03/05/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NDT Engineer Specialist

Description:
NDT Engineer Specialist

Savannah, GA
Long Term Contract
Pay Rate: DOE

Unique Skills:

NDT skills along with part 145 product support manual specialization.


Education and Experience Requirements:

Bachelors degree in engineering or technical curriculum; or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 10 years prior aerospace experience (Commercial, DOD Department of Defense) in NDT and quality systems (working with composites and metals in manufacturing, repair and inspection of aircraft, space systems, motorsports, marine or armament).

Position Purpose:

Leads successful completion of major NDT/engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services including advanced composites and metals processes specifically with regard to production testing criteria, equipment, methodology and specification development for production acceptance testing.

Principal Duties and Responsibilities:

Essential Functions:
1. Establish standards for and/or develop NDT procedures to ensure robust process control including the Gulfstream Shop Practice Manual or Service Manuals as assigned. 2. Lead root cause and corrective action of NDT related MRB to eliminate repetitive rework and continuously improve existing techniques balancing technical product, cost, and schedule. 3. Team leadership of cross-functional product teams (PDT). 4. Identify appropriate methods/techniques for NDT inspection of pre-cured/co-cured or manufactured composite and metals components/articles. 5. Measure and document the capabilities of production inspection methods relative to flaw size and type to support development of robust design incorporating NDT inspection capabilities. 6. Interpret Engineering drawings/requirements and develop recommendations for management and engineering staff to determine quality standards for nondestructive testing. 7. Develop and assess NDT evaluation technologies in support of new and existing programs and improve manufacturing process inspection using NDT methods. 8. Maintain current knowledge of developments in the field of composites and/or related manufacturing technologies in order to recommend innovations to improve quality and effectiveness of company products, equipment and services. 9. Provide certification and training services for Gulfstream as assigned.

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product. 2. Performs other duties as assigned.

Other Requirements:
1. Advanced degree in engineering or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline. 3. ASNT SNT-TC-1A - Level III (Qualified/Certified) preferred in all five principal Gulfstream NDT methods (Minimum 2 of 3 primary methods (ET, RT, and UT required). 4. Capable of operating data analysis and computer software for NDT testing.

Languages Required (in addition to English): None
 
Job Number: 8597
Job Location: Savannah, GA
Rate: DOE
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/07/2018
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Piping Design Checker

Description:
•Piping Design in the Petrochemical Industry
•Minimum 3 years of Piping Design checking
•Proficient in 3D modeling utilizing either of the following software :
PDS E3D, PDMS. AutoCAD Plant 3D 2016 (or higher), or SP3D
Experience with Point Cloud technologies such as LFM Server or AutoCAD Recap
 
Job Location: LA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 02/01/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Piping Designer

Description:
•Proficient in 3D modeling utilizing either of the following software :
PDS E3D, PDMS. AutoCAD Plant 3D 2016 (or higher), or SP3D
•Proficient in Point Cloud technologies such as LFM Server or AutoCAD Recap.
•Capable of managing and overseeing beginner level designers
•Capable of communication with other disciplines and clients.
•Support field assignments and lead field walks as required.
•Capable of providing conceptual input/design during the planning stages of a project
•Able to perform administrative tasks of determining manpower, estimating and progressing design
 
Job Number: 41499
Job Location: LA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 02/01/2018
Firm Name: PANTHER GROUP
Attention: John
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Engineer

Description:
Seeking a Senior SW Engineer with C/C++ development skills needed to support multiple programs.


Role and Responsibilities include the following areas:
• Execute to program requirements. Ensure that cost and schedule commitments are being met to ensure on time delivery of the end product deliverables
• Debug, troubleshoot, issue investigation, find root cause and provide corrective action determination to address integration issues
• Interface directly with Raytheon management team and customers in meetings and reviews
• Expand and influence program developments by working closely with the program managers and other engineers to process direction for the program
• Provide weekly reporting of key programmatic milestones in accordance with the program plan, while insuring risk mitigation throughout the program

Required Experience, Knowledge and/or Skills:
• 8 years software development experience
• Proven experience performing as a Senior SW Engineer for software development teams
• Proven experience in using Green Hills Integrity
• Proven experience spanning software architecture, design and system integration with experience developing embedded software utilizing C and C++
• Proven experience in leading teams using Waterfall and/or Agile Scrum methodology
• Proven experience in writing software test plan and test procedures
• Ability to support engineering team members on various programs
• Ability to multi-task, to support multiple customers, and to work within specific schedule and cost constraints
• Strong organizational skills and ability to motivate and lead a team
• Possess and demonstrate excellent interpersonal, presentation and verbal/written communication skills
• Excellent time management skills


Desired Experience, Knowledge, and/or Skills:
• Certified EVMS
• Experience working with IMS (Integrated Master Schedule)
• Experience with Green Hills Integrity
• Experience with KIV-7M product
• Experience with Raytheon’s Development Process
• Experience in Waterfall and Agile/Scrum, Continuous Integration Environments
• Experience with requirements management using DOORS
• Experience with configuration management using MKS and Git
• Software or Systems Engineering Integration expertise

Required Education Requirement: B.S. Computer Science, Computer Engineering, Software Engineering, Electrical Engineering or other Engineering discipline


Desired Education Requirement: M.S. in Computer Science, Computer Engineering, or Electrical Engineering
 
Job Number: 8006788
Job Location: El Segundo, CA
Rate: DOE
Duration: 12 Months
Start Date: ASAP
Input Date: 02/07/2018
Last Updated: 03/01/2018
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Engineer

Description:
The Software Engineering Center is seeking a Built in Test Engineer to work on next gen Tactical Airborne Sensor System.

Built In Test (BIT) Engineer Job Description:
Applicant needs to have experience with Real Time Embedded Systems in regards to Built-In-Test (BIT). The BIT suite of applications will need to provide confidence for correct operation of each module in various subsystems.

Required Skills:
- Startup-Up BIT (SBIT): Comprehensive testing of hardware and functionality during system startup. Needs to identify subsystem and module in the case of failure.
- Initiated BIT (IBIT): Manual BIT (intrusive). Halts current application and runs comprehensive tests and failure identification on system/module.
- Periodic BIT (PBIT): Non-intrusive tests that can be run while other applications are active.

Desired Skills:
- Device Driver
- Board Support Package
- Ability to use a logic analyzer and/or oscilloscope
- Knowledge of EO/IR and RADAR systems

Required Education:
- B.S. Engineering Degree in either Computer Science or Electrical Engineering
 
Job Number: 8015551
Job Location: Canoga Park, CA
Rate: DOE
Duration: 12 Months
Start Date: ASAP
Input Date: 02/06/2018
Last Updated: 02/19/2018
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Enginer

Description:
Experience programing GPUs / CUDA. Able to implement Signal processing algorithms on GPU and access performance bottlenecks.
 
Job Number: 711
Job Location: El Segunda, CA
Rate: 75.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/07/2018
Firm Name: UNIVERSAL STAFFING SERVICES
Attention: Nancy Boyce
Address: 628 HEBRON AVE
City, State: GLASTONBURY, CT 06033
Phone: 860/527-8135
Website: www.ussjobs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Test Engineer

Description:
Systems Integration and Test (I&T) Engineer to expend the existing team of engineers due to increase in demand for our services. The successful candidate will be responsible for the technical leadership, of I&T activities for assigned program(s).

Required Skills:
• Minimum 8 years of combined experience in the field of hardware/software development and Integration/Testing of complex systems
• Minimum of 2 years of experience in technical leadership, cost, and schedule management associated with integration and testing activities on complex programs
• Write highly complex test procedures and protocols to assess product reliability and evaluate the ability of products to meet performance standards and specifications
• Previous experience with real time embedded systems development and debugging
• Previous experience with systems requirements verification and validation process
• Develop complex test simulations to evaluate how products react under different conditions and analyze product failure to assess the integrity and reliability of product performance. Debugs complex test hardware and software
• Write test scripts such as python and LabView on complex test stations
• Understand networking protocols such as TCP/IP, UDP, ARP, and ICMP
• Prior experience in the technological spaces the work requires

Desired Skills:
• Experience with CMMI and EVMS processes

Required Education:
Bachelors in Computer Science, Computer Engineering, Electrical Engineering, or equivalent, advanced degree desirable
 
Job Number: 8006624
Job Location: El Segundo, CA
Rate: DOE
Duration: 12 Months
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 03/05/2018
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Engineer

Description:
Job Summary:
The successful candidate will work in a team environment to perform the following: process design, relief valve sizing, develop heat and material balances, process flow diagrams and piping and instrument diagrams, size and specify large scale petroleum refining equipment including reactors, fired heaters, pumps, compressors, heat exchangers, fractionation towers, piping and related equipment. The technologies involved will be diverse and cutting edge, spanning all aspects of modern refinery and petrochemical operations.

Job Description:
• Developing flow diagrams, relief valve sizing, heat and material balances, process design and assessment of mechanical equipment, hydraulic modeling, and design of over-pressure protection for new and existing equipment
• Engineering and process design for pressure vessels, tanks, pumps, and compressors
• Manage front end development through to final appropriation
• Managing multiple project, budgets and scope changes

Qualifications:
• Candidate must have a bachelor’s degree in Chemical Engineering
• Candidate must have a minimum of seven years’ experience in process engineering- including process design
• Candidate must have a background in refinery / petrochemical
• Candidate must be capable of working multiple projects at different phases of development at one time, OT may be required on occasion
• Candidate must have experience with process simulation
• Software experience includes ASPEN HYSYS, ProMax, PipeFlow
• Candidate must have excellent communication skills both- written and verbal.
• Candidate must be a self-starter, client focused, team player, and committed to technical excellence
• Critical thinking skills for problem solving, follow through
• Registered Louisiana P.E. a plus
 
Job Number: 41500
Job Location: Baton Rouge, LA
Input Date: 02/01/2018
Firm Name: PANTHER GROUP
Attention: John Sabbagh
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Engineer

Description:
•Developing flow diagrams, relief valve sizing, heat and material balances, process design and assessment of mechanical equipment, hydraulic modeling, and design of over-pressure protection for new and existing equipment
•Engineering and process design for pressure vessels, tanks, pumps, and compressors
•Manage front end development through to final appropriation
•Managing multiple project, budgets and scope changes
Qualifications:
•Candidate must have a bachelor’s degree in Chemical Engineering
•Candidate must have a minimum of seven years’ experience in process engineering- including process design
•Candidate must have a background in refinery / petrochemical
•Candidate must be capable of working multiple projects at different phases of development at one time, OT may be required on occasion
•Candidate must have experience with process simulation
•Software experience includes ASPEN HYSYS, ProMax, PipeFlow
•Candidate must have excellent communication skills both- written and verbal.
•Candidate must be a self-starter, client focused, team player, and committed to technical excellence
•Critical thinking skills for problem solving, follow through
•Registered Louisiana P.E. a plus
 
Job Number: 41500
Job Location: LA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 02/01/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Procurement Agent 2 and 3

Description:
Procurement Agent 3 Positions (Level 2 & 3)

Location: Mesa, AZ
Duration: 6+ months

Description:
Performs continuous review and analysis of demand and supply. Prepares and executes proprietary information agreements. Supports sourcing strategies, negotiations and documenting of contracts and agreements. Communicates performance expectations and metrics to evaluate and monitor supplier performance.

This team is responsible for the procurement and contract management of Information Technology and Data Analytic products and services, including IT infrastructure, IT hardware and Software, managed services, training, consulting and engineering services, across client’s global enterprise and is critical to enabling company operations. This is a chance to be a part of a team whose collective experience spans across the globe and many areas of expertise. We pride ourselves on performance and diversity.

Education / Experience:
Bachelor's degree and typically 3 or more years’ related work experience, a Master’s degree and typically 1 or more years’ related work experience or an equivalent combination of education and experience.

Skill Code: H01-Procurement Admin
 
Job Location: Mesa, AZ
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 01/09/2018
Last Updated: 03/30/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Design Engineer - Agricultural (KS)

Description:
This Client uses Creo 4 and Windchill for their CAD package, so that experience would be helpful, but any 3D modeling experience could wor