Job Search Results

521 listings were found that matched your search words: Keywords: Aerospace ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/10/15 Monday 10:42AM Pacific Time by ContractJobHunter. )

Listings 1 - 521

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2231 - ELECTRICAL HARNESS DESIGNER - resume - word doc only

Description:
Produce and deliver Harness Data Reports based on Digital Mock-up and Mentor Graphics.

Integrate the design of the wire harnesses.

Incorporate changes (RFC, PCR) on the harness data reports.

Contribute to the team effort by meeting the team%u2019s objectives for productivity and quality.

Contribute to other relevant tasks needed to support the team%u2019s objectives.

Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have experience with harness manufacturing or methods.

Have a minimum of 5 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Mentor Graphics Harness XC tool knowledge is the primary requirement.

Also have experience with Catia V5.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Communicate clearly and openly with your team.

Embrace changes and new ideas.

Are persistent to reach your goals.

Seek out and accept feedback.
 
Job Number: 2231
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 07/27/2017
Last Updated: 01/26/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2240 - REAL TIME SOFTWARE DEVELOPER - AEROSPACE

Description:
Engineering support with the necessary skills to develop, track and troubleshoot real time data collection systems on aero engines.

Candidate must have at least 5 years of relevant experience and have some familiarity/experience with DO-178 and DO-254 standards.

Critical Skills:

Experience troubleshooting and debugging airborne diagnostic systems.

Ability to perform investigations into issues that may span across several different platforms and technologies.

Experience with C/C++

Experience with Embedded Linux Operating System and Linux system administration background.

Experience with Real-time Embedded Systems.

Experience with Wireless GSM.

Ability to come to the correct conclusion during investigation and support it with facts.

Self-Motivated.

Strong Problem solving abilities.

Due to security/clearance factors, candidate must be a US citizen.
 
Job Number: 2240
Job Location: Boston, MA
Rate: 100.00
Per Diem: TBD
Overtime: TBD
Duration: 12+ Mths
Start Date: ASAP
Input Date: 07/27/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanic

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a mid-size but rapidly growing company in Seattle, WA that was founded in 2001. They have a new flight test facility in Moses Lake WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Primary Role: Performing routine and periodic maintenance throughout all phases of flight testing; maintaining quality and safety standards; keeping records; maintaining equipment and supplies.

Secondary Role: Support flight test engineers and ground operations personnel as necessary by helping to install test instrumentation, wiring, and custom manufactured hardware.


Job Duties and Responsibilities:
Perform daily pre and post flight inspections.
Perform routine servicing of aircraft systems.
Perform aircraft systems checks and calibration as required.
Trouble shoot and repair pre and post flight squawks in a timely manner.
Assist in the installation and removal of essential flight test instrumentation hardware and wiring.
Routine removal of panels to route and access flight test instrumentation wires and hardware.
Maintain safe operations and workspace.
Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.
Knowledge/Skills/Abilities:

Experience in maintenance support related to flight test is desired but not required.
Experience with or willing to learn working in a flight test environment.
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong organizational, time management and prioritization skills:

Education
High School Diploma
Formal training in Aviation Maintenance Technologies or other related field
A & P Certificate or equivalent Certificate
1-5 years minimum experience maintaining commercial and/or regional aircraft
 
Job Location: Moses Lake, WA
Rate: open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: Now
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst

Description:
Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
Duration: 1 year contract
Shift: 1st Shift

**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.

Skills:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
- B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: 7854
Job Location: Savannah, GA
Rate: $60.00 - $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/23/2017
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst with active secret / ANSYS heat transfer CFD aerothermodynamics liquid rocket engine systems turbomachinery combustion devices URGENT FL

Description:
160246/7337135

Job Title: Aero Thermal Fluids Analyst
62.86/hr


Number of Positions: 3
Remaining Positions: 3
Duties: ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage or Sterling / Talentwise. See attachment for specific background check onboarding requirements **


-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.
Skills: -Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education: B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering


Skills: Required
• ANSYS
• ACTIVE SECRET CLEARANCE

State/Province: Florida
City/Town: Jupiter
Address: 17900 Beeline Hwy


Start Date: 09/18/2017 Hours Per Week: 40.00
Est. End Date: 09/18/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7337135
Job Location: Jupiter, FL
Rate: 62.86/hr max
Duration: 12 month contract
Input Date: 02/22/2018
Last Updated: 02/27/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerodynamicist

Description:
Aerodynamicist with Performance and Handling Qualities (P&HQ)
- Aerospace experience mandatory
Location: Mojave, CA
Duration: Contract 12-24 months
Hourly Rate: up to $85/hr
Overtime Potential
Per Diem if you qualify
Holiday, annual bonus, sick pay, 401k
8+ years of experience in Stability and Control: vehicle stability, dynamic stability, controllability; Performance experience is a plus but majority should come from S&C and flight dynamics.
Transonic vehicle experience required; Supersonic vehicle experience a plus
Experience in reversible flight controls
Experience with SIDPAC toolset a plus
Job Title: Aerodynamicist with Performance & Handling Qualities (P&HQ) expertise. Main Purpose of the Role is seeking an experienced cross-disciplinary engineer with experiences in aerodynamics and computational fluid dynamics. The candidate will build on an intimate knowledge of all aircraft systems and have the ability to support and develop new project initiatives.
Responsibilities:
• Support event simulation model development and validation of performance, handling qualities, stability, and control criteria for suborbital space missions
• Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
• Works with other engineering groups to ensure proper application of design and P&HQ requirements
• Supports entry into commercial service by ensuring that regulatory and internal company requirements related to loads are met
• Develop standardized analysis and reporting tools
• Perform model updates from data collected during vehicle or component testing and data created with analytical tools
• Develop and maintain P&HQ databases for use in analysis of WK2 and SS2 during all flight phases
• Develop and substantiate rational P&HQ criteria and requirements for unique vehicles with unconventional configurations
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Anticipates and resolves issues by developing standards and guidelines
• Ability to problem solve with a balance of technical product, cost, and schedule
Qualifications:
Professional Requirements
• Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 8 years of experience in aerodynamics development
• Experiences in wind-tunnel and flight test aerodynamic model validation
• Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
• Test plan development and data analysis experience a strong plus
• Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
• Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
• Advanced skills with Linux, Python, Simulink, MATLAB, Fortran, C, C++, and software development best practices.
• CATIA V5 experience preferred
• Air Data Experience preferred
• Experience with FUN3D, NSU3D, Pointwise, and/or similar RANS and gridding methods
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
The Structures Company is an AA/EOE.
Job Type: Contract
 
Job Location: Mojave, CA
Rate: up to 85/hr
Per Diem: yes
Overtime: possible
Duration: 12-24 months
Start Date: asap
Input Date: 10/17/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerodynamicist (CFD)

Description:
Aerodynamicist - CFD
Location: Mojave, CA
Duration: 9+ months
Rate: DOE

Aerospace

Aerodynamicist with P&HQ. Main Purpose of the Role is experienced cross-disciplinary engineer with experiences in aerodynamics, computational fluid dynamics, and thermal analysis.  The candidate will build on an intimate knowledge of all aircraft systems and have the ability to support and develop new project initiatives.
 
Responsibilities:
•             Support loads event simulation model development and validation of aerodynamic criteria for suborbital space missions
•             Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
•             Works with other engineering groups to ensure proper application of design and requirements
•             Supports entry into commercial service by ensuring that regulatory and internal company requirements related to loads are met
•             Develop standardized analysis and reporting tools
•             Perform model updates from data collected during vehicle or component testing and data created with analytical tools
•             Develop and maintain aerodynamic databases for use in analysis during all flight phases
•             Develop and substantiate rational P&HQ criteria and requirements for unique vehicles with unconventional configurations
•             Air Data Experience
 
 
Qualifications:
Professional Requirements
•             Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 5 years of experience in aerodynamics development
•             Experiences in wind-tunnel and flight test aerodynamic model validation
•             Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
•             Test plan development and data analysis experience a strong plus
•             Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
•             Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
•             Advanced skills with Linux, Python, Simulink, MATLAB, Fortran, C, C++, and software development best practices.
•             CATIA V5 experience preferred
•             Experience with FUN3D, NSU3D, Pointwise, and/or similar RANS and gridding methods
•             Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
 The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Per Diem: yes
Overtime: possible
Duration: 9+ months
Start Date: asap
Input Date: 10/17/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Advance Process Engineers - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring Aerospace Advance Process Engineers for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Advance Process Engineer shall evaluate processes and configure Aerospace assembly and sub-assembly systems and develop best practices within the production process.

Job Duties:

• Evaluate and improve on processes in assembly and sub-assembly systems
• Develop innovative solutions
• Work with equipment designers and manufacturing officers to develop a cost-effective and working production process
• Undertake scoping study level trade-off evaluations of process alternatives
• Assist in the preparation of project feasibility level capital and operating costs
• Assist in the development of plans, methods, design, materials handling, manpower requirements, cost analysis and other areas as appropriate
• Review design, management and interpretation of project studies, aimed at understanding the project scope, requirements and performance outcomes
• Search and assimilate information generated by others with the aim of solving relevant project issues
• Provide specialist technical input into team project work
• Provide input and evaluation into recovery estimates
• Act as the process lead on studies and projects
• Develop or bring forward, as appropriate, industry best practices and new technologies
• Oversee the development and maintenance of long and short term processing plans, processing designs and input into project development efforts as appropriate
• Prepare and review project proposals, studies and technical reports
• Oversee the cost effective, safe and timely completion of projects that meet or exceed expectations
• Apply a sound basic knowledge of safety, environment and related issues during the processing of projects
• Has the authority and obligation to stop production in case unsafe working conditions are observed
• Has the obligation to notify the Director IO and the President for Safety related matters requiring immediate attention

Qualifications:

• Bachelor of Applied Science or graduate degree in Engineering or related field
• A minimum of five (5) years’ of related Aerospace experience

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40014
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/07/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace BOM Specialists - Everett, WA

Description:
STS AeroStaff Services is hiring Aerospace BOM Specialists for open positions in Everett, Washington.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Develop and maintain Bill of Materials (BOM) of released engineering drawings for details, assemblies, and installations in order to support the aircraft reconfiguration. Duties will include management of tasks independently with assignments provided by Engineering Procurement Supervisor or Engineering Management.

Job Duties:

• Creates Item Masters & maintains base data
• Creates, maintains and revises base Bill of Material (BOM’s)
• Revises “Scheduled” production BOM(s) & routes as required
• Creates and maintains Top-down-BOM structures
• Process Flam EAMR(s) for Flammability Testing
• Create and maintains Service Bulletin BOM(s)
• Audits and analyzes base BOM(s) and cards as required for accuracy
• Coordinates activities with Production Control, Program Management, Design Engineering, Purchasing, Manufacturing Engineering, Stores/Shipping
• Coordinate part number roll decisions with Engineering
• Processes / incorporates engineering changes and demand changes to base cards
• Coordinates changes by communicating revisions to Purchasing, Stores and Prod Ctrl groups
• Coordinates with Program Manager to meet production order demand release requirements as required
• Researches and analyzes part history
• Communicates and coordinates engineering stop work notices
• Creates and maintains Standard Work Instructions for BOM creation and maintenance
• DBT participation on assigned projects
• Primary Focal for Manufacturing Planning / BOM group on assigned projects
• Performs other duties as assigned

Qualifications:

• High school degree or equivalency required
• A minimum of 3 years’ support experience required based on the duties listed
• Advanced knowledge of Bills of Materials and Planning Structures
• Advanced ability in reading engineering drawings & interpreting process/material specs
• Experience with engineering drawings, i.e. being able to read engineering drawings, parts list and drawing notes
• Customer Focus – solicits and uses feedback for continuous improvement
• Strives for quality and excellence
• Accountability – takes a no excuses approach to making things happen
• Takes responsibility for own actions and results
• Teamwork – Actively assists to move the team toward the completion of goals
• Collaboration - Establishes collaborative relationships to achieve objectives
• Creativity and Innovation - Develops fresh ideas that provide solutions to all types of workplace challenges
• Decision Making and Judgement- Makes timely informed decisions that take into account the facts
• Aerospace or Accounting background
• Ability to work well independently and cross-functionally across multiple organizations and disciplines
• Strong communication, time-management, and problem-solving skills
• Proficient knowledge of MS Office Products (Excel, Word, Project, etc.)
• Establish collaborative relationships to achieve objectives
• Communication – Excellent interpersonal and communication (written and verbal) skills
• Show positive attitude and volunteer for various assignments in order to complete program on schedule and budget
• Self-motivated and multi-tasker

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39991
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Design Engineers - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring Aerospace Design Engineers for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• To design tooling, fixtures or equipment per customer specifications to meet the intended need
• Develop advanced planning on tooling concepts
• Support manufacturing during build phases and resolve any non-conformances in a timely manner
• Utilize CAD software to perform FEA analysis on designs, write FEA reports and provide design feedback to design engineers
• To support and provide feedback on customer RFQ’s
• Assume other accountabilities and duties as assigned by the Leadership

Qualifications:

• Strong CAD (Catia, NX, etc.) design abilities including 3D modeling and complex assemblies
• Experience with and/or knowledge of Tooling Design and Manufacturing, Controls knowledge a plus
• Experience with and/or knowledge of Automated Production Systems a plus
• Ability to effectively prioritize and execute tasks in a high-pressure environment including following on tools during the fabrication, build installation and commissioning phases of the project
• Ability and willingness to travel to any of the customer and Company’s work locations in North America, Europe and Asia, as required by Management
• Must be willing to work extended hours, when necessary, including overtime, weekends and holidays and on night shift, as project and customer demands dictate
• Excellent interpersonal, written and verbal communication skills
• Ability to work with others, including peers and personnel in other departments
• Eligibility for clearance under the Canadian Controlled Goods and the American ITAR requirements
• At minimum a Bachelor of Science in Mechanical or Aerospace Engineering, Masters of Science in an engineering discipline preferred
• PE license preferred, must show ability to attain license
• Minimum 5 years’ experience performing stress analysis utilizing FEA software (Abaqus, Algor, NASTRAN/PASTRAN, etc.) and performing hand calculations

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39985
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer

Description:
Prefer candidates w/ Matlab & Simulink. Perl exp. a plus. Looking for hardware test, requirement development, component selection and component verification acceptance experience
Testing experience is a lower priority compared to other skills. Looking for Components and Test with direct experience in GNC HW component assessment to requirement and analysis. Focus is on GNC Hardware Components.
Will help review component requirements, select vendors, manage vendors/deadlines, develop procedure performance specs, and develop test procedures for integration.
Testing exp a plus, not main priority.
Looking for candidates w/ 5 yrs of exp (mid-level, experienced candidates). 5 – 8 years of experience is good and no master’s is required although desired.
Looking for satellite experience, launch vehicle, UAV and aircraft is acceptable if their related experience is with GNC hardware component.

Perform requirements management, vendor technical monitoring and guidance, and I&T activities for Guidance Navigation and Control (GNC) spacecraft component hardware. This includes analyzing system requirements to perform hardware component selection, developing component hardware Statement of Work (SOW), analyzing, allocating and decomposing higher level spacecraft requirements to their respective GNC components, monitoring component vendor’s development activities per the SOW and developing test procedures and automated tests of the GNC hardware to verify requirements, support spacecraft I&T activities, perform detailed spacecraft simulations using in house simulation tools, and analyze data to develop performance and functional data reports to support requirements.
 
Job Number: 52221
Job Location: Gilbert, AZ
Per Diem: Yes
Duration: 6 months plus
Start Date: ASAP
Input Date: 08/30/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Rich Nguyen
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineers (Level 3) - Atlanta, GA

Description:
STS AeroStaff Services is currently hiring Aerospace Engineers (Level 3) for open positions in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Support Engineering project development for a wide variety of Avionics, Structures, and Systems Engineering initiatives
• Supporting shop, hangar and line maintenance customers in accomplishing Engineering projects
• Leaving the office environment and going to hangar, line, shop, planning and other support groups to gain details necessary to complete accurate project
• Providing aircraft engineering support to a variety of internal customers and outside suppliers to support Engineering solutions for long term safety/reliability/cost effectiveness
• Reviewing, recommending, and implementing manufacturers' service bulletins and other correspondence to affected fleets
• Reviewing data and recommending and implementing changes as required to improve aircraft reliability
• This position reports to the Engineering Solutions Manager, and work demand will vary based on current departmental needs and priorities among multiple managers
• Develops both strategic and tactical plans that create a safety-conscious environment resulting in employee safety and well-being

Qualifications:

• A bachelor's degree is required
• Prefer candidates have: Bachelor's Degree in Engineering with 3-5 years’ aviation related experience, Master's Degree in Engineering with 1-3 years’ aviation related experience, Ph.D. Degree in Engineering, or 5-9 years’ in a technical aviation related discipline with at least 2-3 years’ in an aviation engineering organization
• Project Management skills or certifications a plus
• Recent college graduates with a degree in Engineering or an aviation-related field will be considered
• Previous airline, military, OEM, or MRO experience with commercial aircraft is strongly preferred
• Familiarity with airline flight operations and support systems, FAR 121 dispatch regulations, computers and programming is desirable
• Works under minimal direction. Independently determines and develops approach to solutions
• Only complex/difficult projects are reviewed upon completion for adequacy in meeting objectives
• Majority of projects require no review
• Solid understanding and wide application of technical principle, theories and concepts as they pertain to his/her job function
• General knowledge of engineering related disciplines outside his/her job function
• Provide feasible alternatives to solve difficult technical problems over a wide scope
• Solutions are imaginative and practical
• SCEPTRE knowledge preferred
• Familiarity with Boeing and Airbus products is favorable
• Project Management experience desirable

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40083
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/13/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Expeditors - Cape Canaveral, FL

Description:
STS AeroStaff Services is hiring Aerospace Expeditors for open positions in Cape Canaveral, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Expedite parts to meet developed estimated completion dates
• Expedite parts through other departments to break any hold factor in support of late part delivery
• Expedite material from the receiving dock, stock rooms and buyers in support of late part delivery and deliver to using department
• Maintain weekly visibility on part shortages
• Support of Data Integrity in Company MRP system
• Control of Non-conforming Material / Return to Inventory / Stock Purge
• Expedite Off-site processing

Basic Qualifications:

• High school diploma is required
• Minimum 3 years’ of experience in a production or manufacturing environment
• Minimum 3 years’ of experience working with an MRP system

Preferred Skills and Experience:

• Experience in aerospace, automotive, or consumer electronics manufacturing
• Minimum 3 years’ of production control experience is required

Additional Requirements:

• Lifting up to 30lbs., standing, climbing, bending, grasping, sitting, pulling, pushing stooping, stretching and carrying are generally required to perform the functions of this position
• Must be available to work all shifts, overtime, and weekends, as required

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39932
Job Location: Cape Canaveral, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 08/30/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Instrumentation Technician

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.The strategic purpose of the Test and Evaluation Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

Responsibilities:

Reading and creating wire diagrams.
Selecting or auditing appropriate sensors given engineering requirements.
Working with customers and engineers to define appropriate instrumentation requirements.
Designing instrument installations and creating installation instructions.
Instrumentation installation.
Evaluating instrumentation installations for function and safety.
Troubleshooting instrumentation problems.
Data acquisition system operation.
Documenting data system practices and procedures.
Generating instructions and operation manuals.
Developing sensor calibration and functional test procedures.
Maintaining calibration records.
Domestic and international travel may be required.
Desired Qualifications:

3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to work interdependently, and lead small groups.
CATIA V experience beneficial.
Experience with data processing and analysis beneficial.
Computer programming experience beneficial.
Proficient in working with Microsoft Office applications including Word and Excel.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 09/09/2017
Last Updated: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Instrumentation Technicians-Flight Test

Description:
Interested in candidates with aerospace or automotive backgrounds.

Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

Responsibilities:
� Reading and creating wire diagrams.
� Selecting or auditing appropriate sensors given engineering requirements.
� Working with customers and engineers to define appropriate instrumentation requirements.
� Designing instrument installations and creating installation instructions.
� Instrumentation installation.
� Evaluating instrumentation installations for function and safety.
� Troubleshooting instrumentation problems.
� Data acquisition system operation.
� Documenting data system practices and procedures.
� Generating instructions and operation manuals.
� Developing sensor calibration and functional test procedures.
� Maintaining calibration records.
� Domestic and international travel may be required.

Desired Qualifications:

� 3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to work interdependently, and lead small groups.
� CATIA V experience beneficial.
� Experience with data processing and analysis beneficial.
� Computer programming experience beneficial.
� Proficient in working with Microsoft Office applications including Word and Excel.
 
Job Location: Moses Lake, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 2-3 year contract or Direct
Start Date: Now
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Software Engineer (java)

Description:
Role: Aerospace Software Engineer (java)

Location: Cedar Rapids, Iowa.

Duration:6 months+

Qualifications
Must Have Requirements:

• Bachelor's degree in a Science, Technology, Engineering or Math (STEM) discipline
• Candidate must hold a current U.S. DoD SECRET Security Clearance or be eligible to obtain a U.S. DoD SECRET Security Clearance.
• Enterprise software development experience (Java, XML suite) (2 years)
• Enterprise networking experience (2 years)
• Linux development experience (2 years)
• Experience following a well defined software development process (2 years)
• Adaptable to change, enjoys learning new technologies, and contributes to a positive work environment
• Solid written and verbal communications skills and the ability to work well with others in a professional team environment
• Strong organizational skills and the ability to manage multiple tasks while balancing priorities and schedules
• Motivated self-starter with strong analytical skills
• Configuration management tools and processes experience
 
Job Number: 52234
Job Location: Cedar Rapids, IA
Duration: 6 years+
Input Date: 09/01/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bala
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Structures Engineer

Description:
We are seeking full-time Aerospace Engineers with Structures experience to join our Flight Test Facilities in Moses Lake with the ability to work rotations in our Seattle offices. If you have 4+ years of experience in Structures, we would like to speak with you.
Job Duties
• Create and review Certification Plans.
• Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Reports.
• Review qualification by similarity and/or analysis reports.
• Review system safety documents.
• Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
• Perform Component Drawing Reviews.
• Complete aircraft assembly and installation drawing reviews.
• Participate in Systems Design Reviews.
• Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.
• Support Test planning and preparation activities
• Support Pre and Post Flight Briefing.
• Monitor live flight data, typically via telemetry
• Process and Analyze Post Flight data.
• Appropriate the disposition of non-conformances, quality escapes, etc.
• Document flight test design problems for long term fixes.
• Conduct Tlight Test Report Writing.

Requirements
• Bachelors Degree in Engineering, Mathematics, Physics or related Science (or equivalent combination of work and experience).
• 4+ years of aerospace experience.
• Ability to think critically, identify and synthesize important information necessary to inform client deliverable.
• Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations, etc.)
• A team player with the ability to thrive in a fast-paced environment and work effectively with others across disciplines, functions and organizations.
• Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
• Ability to represent AeroTEC professionally and positively during client interactions and actively build rapport and trust to lead to greater business opportunities for the company.
• Computer Skills: Comfortable and proficient working in Microsoft Office. Intermediate Excel proficiency required.
 
Job Location: Moses Lake, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 09/09/2017
Last Updated: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interior Design Engineer

Description:
Interior Design Engineer:
Location: Southeast USA
Duration: long term contract

The Interior Design Engineer will perform design engineering for cabin & cockpit structures, components, and trim for aircraft. The individual will also support tasks associated with interior Installations.

Duties and Responsibilities:
1. Creates conceptual designs for interiors of the aircraft through 3D modeling software, drawings, and/or drafting application.
2. Develops designs for form/fit/function to meet customer and design criteria.
3. Provides designs for the fabrication process including sheet metal, extrusions and inject molding
4. Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
5. Makes recommendations to engineering lead/management.
6. Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.
7. Ensures adherence to program schedule.
8. Performs other duties as assigned.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors’ degree in Mechanical, Aerospace or Civil Engineering from a four year college or university is required. (In lieu of degree, management may elect to consider individuals with a equivalent years of combined experience and training.)
2. Masters’ degree in Engineering preferred.
3. 8+ years of engineering experience with at least three years of design engineering experience directly related to mechanical/interior design for commercial aircraft.

Knowledge, Skills and Abilities:
1. Working knowledge of conceptual design development of aircraft interiors.
2. Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
3. In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
4. Familiarity with 14CFR Part 23/25.
5. Proficiency in CATIA V5 workbenches or equivalent 3D modeling tools (i.e. - Solidworks, Unigraphics, etc).
6. Proficiency in Teamcenter (or equivalent PLM tool).
7. Ability to work independently or within a team environment.
8. Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
9. Ability to work cross functionally with Quality and Production to resolve issues on the production line.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Southeast US
Rate: DOE
Per Diem: Yes
Overtime: Possible
Duration: 9+ months
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Stability & Control Analyst (Performance & Handling Qualities)

Description:
US Persons ONLY -
• 8+ years of experience in Stability and Control: vehicle stability, dynamic stability, controlability; Performance experience is a plus but majority should come from S&C and flight dynamics.
• Transonic vehicle experience required; Supersonic vehicle experience a plus
• Experience in reversible flight controls
• Experience with SIDPAC toolset a plus


Job Title: Aerodynamicist with Performance & Handling Qualities (P&HQ) expertise. Seeking an experienced cross-disciplinary engineer with experiences in aerodynamics and computational fluid dynamics. The candidate will build on an intimate knowledge of all aircraft systems and have the ability to support and develop new project initiatives.

Responsibilities:
• Support event simulation model development and validation of performance, handling qualities, stability, and control criteria for suborbital space missions
• Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
• Works with other engineering groups to ensure proper application of design and P&HQ requirements
• Supports entry into commercial service by ensuring that regulatory and internal company requirements related to loads are met
• Develop standardized analysis and reporting tools
• Perform model updates from data collected during vehicle or component testing and data created with analytical tools
• Develop and maintain P&HQ databases for use in analysis during all flight phases
• Develop and substantiate rational P&HQ criteria and requirements for unique vehicles with unconventional configurations
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Anticipates and resolves issues by developing standards and guidelines
• Ability to problem solve with a balance of technical product, cost, and schedule


Qualifications:
Professional Requirements
• Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 8 years of experience in aerodynamics development
• Experiences in wind-tunnel and flight test aerodynamic model validation
• Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
• Test plan development and data analysis experience a strong plus
• Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
• Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
• Advanced skills with Linux, Python, Simulink, MATLAB, Fortran, C, C++, and software development best practices.
• CATIA V5 experience preferred
• Air Data Experience preferred
• Experience with FUN3D, NSU3D, Pointwise, and/or similar RANS and gridding methods
• Applicants must be U.S. persons


The Structures Company, LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Bleed Air Designer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-024
Job Location: Greensboro, NC
Rate: Up to $60/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/17/2018
Last Updated: 10/15/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer

Description:
-CNC Programmer needed with atleast 5 years experience.
-Must have 5 Axis experience.
-Mastercam or comparable tool required.
-Aircraft or Aerospace experience preferred.
-Contact Steve@blacktreetech.com
 
Job Location: East of Los Angeles, CA
Rate: $35-40/hour
Per Diem: YES
Overtime: YES
Duration: 6+ Months
Start Date: ASAP
Input Date: 09/13/2017
Firm Name: BLACKTREE TECHNICAL GROUP
Attention: Steve Lucey
Address: 300 TRADECENTER STE 1400
City, State: WOBURN, MA 01801
Phone: 781/932-3333
Website: www.blacktreetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer IV

Description:
CNC Programmer IV

Location: Canoga Park, CA
Rate: DOE
Duration: 1 year contract
Shift: 1st Shift

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Phone AND In-Person interviews are required. Candidates must be able to attend an in-person interview at their own expense **

Duties:
Must show this experience on resume:
** Siemens NX9-NX11 NC Programming experience is required **
** DMU Mori with Siemens 840D Experience; Specifically DMU80 FD and DMU65 **
** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

50% - The NC Programmer is responsible for writing new CNC programs, setup instructions, estimating and making changes to existing CNC programs. Will develop, write and maintain NC programs for complex aerospace components using engineering models, drawings and specifications to support a zero defects machining operations environment. Selects program routines for the most efficient machining methods for each part. Will be involved in the prove out of new technology, first article inspection, fixture design, and day to day programming using Siemens NX9-NX11 CAM.
10% - Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.
5% - Make proper cutting tool selections, taking into consideration such factors as materials, speeds, type of cutters, feeds and control system imitations.
10% - Use machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and 100% defect-free FTT machining processes.
10% - Modify existing parts programs for engineering changes or program improvements.
5% - Work closely with Machinists, Quality, Engineering, Management and other team members.
5% - Develop, write and maintain type II probe and logic macros to perform on machine touch probe measuring, fixture updates, cutter offset updates, and part feature data collection.
5% - Participate in knowledge sharing and cross training activity within the NC programming group.

Skills:
** Siemens NX9-NX11 NC Programming experience is required **
** DMU Mori with Siemens 840D Experience; Specifically DMU80 FD and DMU65 **
** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

Preferred Requirements:
-NX Post Builder expertise
-NX Machine tool Configurator expertise
-Vericut Machine Builder expertise
-Fanuc custom macro programming expertise
-Siemens 840D macro programming expertise

Education:
- Bachelors degree or equivalent experience.
 
Job Number: 7811
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 01/04/2018
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer IV / MUST have Current and Strong NX Programming / local only CA

Description:
160187/7332297

Job Title: CNC Programmer IV
Keywords:
Number of Positions: 1
Remaining Positions: 1
Duties: ** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Required (Please screen for these three items and make sure the experience is accurately reflected on resumes):
** Siemens NX9-NX11 NC Programming experience is required **
** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **
** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

** Candidates above the maximum bill rate will be considered. Please make sure that they are submitted at rates commensurate with their qualificaitons **

** Phone AND In-Person interviews are required. Candidates must be able to attend an in-person interview at their own expense **


• 50% - The NC Programmer is responsible for writing new CNC programs, setup instructions, estimating and making changes to existing CNC programs. Will develop, write and maintain NC programs for complex aerospace components using engineering models, drawings and specifications to support a zero defects machining operations environment. Selects program routines for the most efficient machining methods for each part. Will be involved in the prove out of new technology, first article inspection, fixture design, and day to day programming using Siemens NX9-NX11 CAM.
• 10% - Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.
• 5% - Make proper cutting tool selections, taking into consideration such factors as materials, speeds, type of cutters, feeds and control system imitations.
• 10% - Use machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and 100% defect-free FTT machining processes.
• 10% - Modify existing parts programs for engineering changes or program improvements.
• 5% - Work closely with Machinists, Quality, Engineering, Management and other team members.
• 5% - Develop, write and maintain type II probe and logic macros to perform on machine touch probe measuring, fixture updates, cutter offset updates, and part feature data collection.
• 5% - Participate in knowledge sharing and cross training activity within the NC programming group.




Skills: Required (Please screen for these three items and make sure the experience is accurately reflected on resumes):

** Siemens NX9-NX11 NC Programming experience is required **

** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **

** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

Preferred Requirements:
-NX Post Builder expertise
-NX Machine tool Configurator expertise
-Vericut Machine Builder expertise
-Fanuc custom macro programming expertise
-Siemens 840D macro programming expertise

Education: Bachelors degree or equivalant experience.


Skills: Required
• SIEMENS
• NC PROGRAMMING
• LATHE


Work Performed
Onsite:
State/Province: California
City/Town: Canoga Park
Address: 8900 Desoto Ave


Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 09/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7332297
Job Location: Canoga Park, CA
Rate: 44.29/hr
Duration: 12 month contract
Input Date: 08/28/2017
Last Updated: 09/21/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Calibration Technician -

Description:
JSG is looking for a Calibration Technician for a 15 Month Contract Opportunity with our client in Coatesville, PA


ASSIGNED DUTIES:

Recall calibrated tooling periodically in accordance with company's master calibration schedule.
Send complex calibrated tooling out to a calibration vendor for periodic inspection/maintenance.
Perform simple calibrations in-house in accordance with Sikorsky and NIST (National Institute of Standards and Technology) procedures.
Maintain certification documentation for each piece of Sikorsky PA’s calibrated tooling.
Follow broad instructions and general methods to work from metrology procedures and standards, tool designs, engineering drawings, etc., to perform inspection and calibration duties.
Set up and operate a variety of precision gages and instruments, and perform complex layouts, to inspect and calibrate tools to metrological standards.
Repair, adjust micrometers, height gages, vernier calipers
Maintain close liaison with other departments to resolve metrology problems.
Troubleshoot/repair testing equipment; have a working knowledge of electricity, circuitry, and mechanical components.
Demonstrate knowledge of the technical standards for establishing calibration set out by the American Society of Testing and Materials.
Skills Required:

Candidate must demonstrate excellent math skills (emphasis on trigonometry and geometry) and be able to analyze numerical data
Candidate must demonstrate computer literacy; with emphasis on Microsoft Access and Excel for data management.
Experience Required:

Minimum High School Diploma or Equivalent Required
Formal education in Calibration Technology; or American Society for Quality (ASQ) Certified Calibration Technician certification Required
Demonstrated aerospace metrology experience or Military calibration experience required
 
Job Number: 358918
Job Location: Coatesville, PA
Rate: $21.50hr
Per Diem: no
Overtime: Yes
Duration: 15 months
Start Date: asap
Input Date: 08/04/2017
Last Updated: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III

Description:
Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
**This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **
**Candidates should have 2 to 8 years of related work experience. No recent college graduates please**
**Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware**


Skills:
- 25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
- 25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
- 20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- 10%: Develops trade studies, design concepts, systems integration and component-level test plans.
- 10%: Supplier integration with external vendors
- 10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.


Education:
- A Bachelor's degree in Mechanical or Aerospace Engineering.
- Candidates should have 2 to 8 years of related work experience. No recent college graduates please.
 
Job Number: 7819
Job Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 04/03/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III / local preferred URGENT CA

Description:
160209/7333281

8 open positions

48/hr max

Manager is currently interviewing.

Job Title: Component Product Engineer (Project Engineer) II/III



Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **



* Candidates should have 2 to 8 years of related work experience. No recent college graduates please *



Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.

Skills:
25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.
10%: Supplier integration with external vendors
10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
A Bachelor's degree in Mechanical or Aerospace Engineering.

Skills:
Required

PROJECT ENGINEER COMPONENT ENGINEERING

State/Province: California
City/Town: Canoga Park

Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 03/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7333281
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 04/03/2018
Last Updated: 05/18/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Engineering Liaison Production - Aerospace

Description:
Engineering Liaison Production - Aerospace and Defense
Contract - Contract to hire.

Ingenium Technologies - San Diego, CA
Must be a US person

An Engineering Liaison Production Temp is needed for a proven and reliable world leader in Aviation Air-to-Ground Communications, Aircraft Systems and Tactical Reconnaissance Radars, as well as advanced high-resolution Surveillance Systems.

Responsibilities will include but not be limited to:
• Under general supervision and with intermittent review, this position supports New Product Introduction (NPI) manufacturing engineering by serving as a liaison between the NPI engineers and operational departments.
• Monitors developmental item progress and expedites critical components most often made by a manufacturing service request.
• Evaluates and resolves periodic production problems related to manufacturing service request items.
• Maintains location awareness and physical control of prototype parts and tools in-work.
• Attend frequent factory control sessions to advocate resource assignments for developmental work and resolve holdups.
• May negotiate work plans with suppliers, shop supervisors and manage schedules for timely delivery.
• Examines pre-production drawings and technical information to translate design intent for prototype products.
• Ability to track down responsible authorities in diverse design groups to resolve uncertainties in a timely manner.
• Monitors and reports progress of manufactured or acquired parts for projects.
• Formulate process models and cost-estimation basis in support of capital investment.
Software Requirements:
• Microsoft Office Products

Required Experience:
• 5 to 15 Years experience in aerospace composite manufacturing, processing and materials knowledge.
• Proficient in composite lamination and assembly process techniques, especially as it pertains to the use of tooling.
• Strong working knowledge of composite tool designs including master molds, lamination molds, assembly fixtures, mill fixtures and other similar composite processing fixtures.
• Working knowledge of common composites materials including prepregs and various bagging materials.

Required Education: Bachelor's degree preferred. May substitute equivalent experience in lieu of education.

Position: Contract to Hire, 1 year or longer

Location: San Diego, CA

Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to verify US Citizenship.

Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation, or any other
 
Job Number: 95015
Job Location: San Diego, CA
Rate: $55.00
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: Now
Input Date: 09/13/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: David Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Manufacturing Engineer 2nd Shift - Aerospace

Description:
Description:

Manufacturing Engineer 2nd Shift - Aerospace and Defense

Ingenium Technologies - San Diego, CA

A Manufacturing Engineer 2nd Shift is needed for a proven and reliable world leader in Aviation Air-to-Ground Communications, Aircraft Systems and Tactical Reconnaissance Radars, as well as advanced high-resolution Surveillance Systems.


Responsibilities:

Perform detailed review of composite part CAD model and lamination drawing (solid and honeycomb panel designs)

Generate surface geometry representing tool and honeycomb core layers, generate boundary curve geometry for individual plies from the applicable CAD models and drawings

Utilize Siemens NX and FiberSIM PLM software package to produce a composite manufacturing solution for complex parts that adheres to engineering process specifications

Generate Flat Pattern and Laser Projection files using FiberSIM

Create Powerpoint PlyBook files from Flat Patterns, for use by the Manufacturing Engineering group in lamination work instructions

Provide support to manufacturing engineering on shop floor when needed



Software Requirements:

Experience with CAD, Siemens NX (Unigraphics)/FiberSIM, PLM is required


Required Experience:

5 to 15 Years experience in aerospace composite manufacturing, processing and materials knowledge.
Proficient with CAD (Creo and/or Pro E) and Siemens NX/FiberSIM PLM software
Working knowledge of composite part design and fabrication methods
Experience working in commercial and/or military aircraft manufacturing environments
Familiar with composite lamination drawings and process specifications
Previous hand layup experience with prepreg material is a plus


Required Education: Bachelor's degree preferred. Associate's degree in a related discipline and three or more years progressive experience in a technical field. May substitute equivalent professional experience in lieu of education/training.


Position: 2nd Shift, Contract to Hire, 6mos or longer

Location: San Diego, CA


Employment Criteria : This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Citizen, who does not work for a foreign company/foreign government/foreign governmental agency or organization, and is in compliance with International Traffic in Arms Regulations.


Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 95012
Job Location: San Diego, CA
Rate: $45.00
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: Now
Input Date: 09/13/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: David Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer (6 openings)

Description:
Composite Structural Design Engineer (6 openings)
Location: Mojave, CA
Duration: 12+ months
Hourly rate: Open, DOE
Desired Skills: MICROSOFT OFFICE;CATIA; Structural design of primary and secondary composite aircraft structure.
Composite Structural Design Engineer Job Description
Perform preliminary and detail design of metallic and composite structure, including initial sizing of joints, structure layout and design for manufacturability.
Create 3D/2D definition of parts, assemblies and installations.
CATIA V5, Composites workbench is a plus.
Establish manufacturing tolerances for production of structural components using GD&T.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements
Works with Industrial Design team to develop conceptual designs for cabin interior
Develops rapid prototypes for evaluation throughout design development process
Develops 3D CAD models and 2D engineering definition for detail parts, assemblies, and installations inside the pressurized cabin
Establishes manufacturing tolerances for production of structural components
Develops and documents system requirements and interface constraints for components
Coordinates with Analysis and Testing departments to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes .
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)
Educational Requirements
Bachelor's degree from an accredited institution, with a concentration in Aeronautical and Astronautical, Aerospace, or Mechanical Engineering..
Composite Structural Design Engineer requirements:
3 years or more experience design engineering for aerospace composite fabrication and assembly processes.
Proficient with CATIA V5
Required Workbenches: Part Design, Assembly Design, Sketcher, Drafting, Wireframe and Surface Design
Desired Workbenches: Generative Shape Design (GSD), Composites (CPD) Experience using GD&T and ASME Y14.5M-1994 drafting standards
Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
Experience designing for aerospace environments
D_ _esired Experience in the development of human spaceflight hardware desired
Experience with Product Lifecycle Management (PLM) software and configuration management processes
Excellent analytical and decision-making skills Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.
Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook
Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
Composite Structural Design Engineer
The Structures Company, LLC is an AA/EOE.
 
Job Location: Mojave, CA
Rate: "open"
Per Diem: yes
Overtime: possible
Duration: 12+ month
Start Date: asap
Input Date: 09/19/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Computer Systems Security Specialist 4

Description:
Computer Systems Security Specialist 4

Location: Centennial, CO
Pay Rate: DOE
Duration: 1 year contract
**MUST have an ACTIVE DoD SECRET CLEARANCE**
**MUST be a U.S. CITIZEN**

PRIMARY DUTIES AND RESPONSIBILITIES:
The Cyber Threat Intelligence Analyst and Liaison is an integral part of the Company Information Security Team. The primary function of the role will be to identify, process, and analyze cyber threats; establishing the extent of the threat, potential impact to the environment, and work with the team to manage the risk.
• Triage, process, and analyze cyber threats originating from Intel feeds and analytical systems.
• Perform detailed analysis of threats, combining sound analytical skills with advanced knowledge of IT and network threats.
• Analyze cyber threat data and correlate with understanding of existing environments.
• Perform post mortem analysis on logs, traffic flows, and other activities to identify malicious activity.
• Reviewing weekly, monthly, and on demand threat intelligence reports.
• Liaise with service providers, ISACs, ISAOs, and enforcement organizations to ensure a continual flow of updated threat data.
• Articulate security issues, analysis, and remediation techniques to peers, leadership, and across business lines.
• Respond to technical security questions and concerns from the business.
• Gather, maintain, and analyze cyber-security data and other key performance indicators for regular executive review.
• Maintain a strong awareness and understanding of the current threat landscape.
• Conduct research on emerging security threats and potential impact.
• Conduct research on and communicate emerging security tools to meet organizational needs.
• Develop and manage security status metrics reports to Leadership.
• Coordinate and conduct special projects as directed by the Company CISO.
• Provide Information Security Incident Response & Assessment Management.
• Perform Information Security Forensics.
• Perform Cyber Investigations.
• Oversee Penetration Testing Service coordination.

REQUIRED QUALIFICATIONS:
• Bachelors Degree in Computer Science, Information Technology, MIS or equivalent.
• 10 years IT experience
• 5 years professional experience working in Information Security in a computer/network/security analyst role monitoring systems.
• Hold and maintain an ACTIVE DoD SECRET CLEARANCE w/ SCI eligibility.
• Demonstrated understanding of the life cycle of network threats, attacks, attack vectors and methods of exploitation with an understanding of intrusion set tactics, techniques, and procedures (TTPs).
• Experience with SIEM systems, preferably SPLUNK.
• Hold a proficient understanding of TCP/IP, common networking ports and protocols, traffic flow, system administration, OSI model, defense-in-depth and common security elements.
• Excellent analytical, problem solving, written, and verbal communication skills.
• Proven ability to effectively communicate technical security requirements across multiple lines of business operations.
• Knowledge of Incident Management Process.
• Hands-on experience with Network IDS/IP system.
• Proven ability to find, evaluate and succinctly summarize and analyze information.
• Experience using common vulnerability detection and discovery tools.
• Experience working in or with an outsourced service organization.

DESIRED QUALIFICATIONS:
• Experience working in Aerospace and/or DoD environments.
• Active interest in cyber security, incident detection, network and systems security.
• Familiarity with cyber-crime and cyber-attacks, responsible groups, motivations and techniques.
• Demonstrated hands-on experience analyzing high volumes of logs, network data (e.g. Netflow, FPC), and other attack artifacts in support of incident investigations.
• Demonstrated commitment to training, self-study and maintaining proficiency in the technical cyber security domain.
• Familiarity or experience in Intelligence Driven Defense and/or Cyber Kill Chain™ methodology.
• Experience with Information Security frameworks (i.e. ISO/IEC 27001, NIST SP 800-53, NIST SP 800-37), and service delivery frameworks (e.g. ITIL)
• Experience with Antivirus/Malware Console management
• Experience with Windows and Linux/UNIX systems.

DESIRED CERTIFICATIONS:
• CISSP – Certified Information Systems Security Professional
• CEH – Certified Ethical Hacker
• ISSAP – Information Systems Security Architecture Professional
• GCIH – Certified Incident Handler (GIAC)
 
Job Number: 7507
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 06/07/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Electrical Harness Installation Engineer-Special Missions

Description:
Unique Skills:
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required. _________________________________________________________________________________________________________________________ Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned
 
Job Number: 115282
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 09/07/2017
Firm Name: INTERGEN GROUP
Attention: Kim mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contracts Manager

Description:
This individual will lead the contracts administration team and prioritize workflow to support customer and internal business objectives. Review RFP/RFQs, support proposal activities and participate as required in negotiations. Oversee the administration of contracts of sale and other terms of business. Lead the team on high dollar value proposals, negotiations and other complex contractual issues.



Principal Responsibilities:

PRE-CONTRACT ANALYSIS
•Evaluation and assessment of risk for proposed new/sustaining business
•Ensure new business meets company business objectives
•Prepare business cases evaluating investment, profitability, and returns of new proposals; present and defend business cases to management.
•Prepare commercial/technical volumes and proposals for submittal to customers, including TINA compliant proposal packages when required.
•Serve as liaison between client and clients customers for pricing and contractual matters.

CONTRACT NEGOTIATION
•Negotiation of sales contracts including pricing and other terms of business with customers
•Preparations of non-disclosure and other company agreements where appropriate
•Ensuring limit of liability coverage with customers where appropriate
•Negotiation and coordination of all issues with the customers pertaining to contractual matters.

CONTRACT MANAGEMENT & REVIEW
•Review assigned customer Contracts and Purchase Orders and issue internal client Work Authorization for distribution throughout the company.
•Contract Administration, including coordination of changes with the customers, assertion development/negotiation, assistance in cash collection, contract closeout, and other administrative matters.
•Learn and fully understand customer contract requirements, communication methods (including portals), metrics, and be able to assure client business processes effectively support and align as needed to execute successfully on customer requirements.
•Interact with customers and internal company disciplines as needed ensuring contract compliance.

OTHER RESPONSIBILITIES
•Manage progress payment schedules and provide financial forecasts to management as required.
•Ensure compliance of sub-contractor proposed cost or pricing data, within the requirements in FAR Part 15 as applicable.
•Conduct fact finding of supplier proposal data (including at sub-contractor locations as needed), to assure supported basis of estimates and documentation.
•Support the Program Office to assure all items that affect communication, cost, schedule, etc. are properly managed from a contractual perspective in a timely manner.
•Support customer and third party audits, and audit requirements, fully.


Education:

Bachelor’s degree required (Contract Law, Business Administration, or related field). MBA in business or related discipline is preferred.


Experience and Qualifications:
•Must have a minimum of 10 years Government Contracts experience
•Must have experience with high level bids and proposals
•A minimum of seven years of experience in a business and/or manufacturing environment preferably in the commercial and/or military aerospace market is required. Significant or extra-ordinary experience or education may be considered in lieu of ten years of experience.
•Working knowledge of FAR/DFAR requirements, including most aspects of the preparation and support of TINA compliant proposal packages is required.
•Understanding of basic business financials, including rate structures, cash flow analysis, and basic financial calculations is required.
•Comfort and familiarity with engineered products in a manufacturing environment is preferred.
•Good analytical/judgment skills and a good financial acumen are required.
•Effective interpersonal skills, written communication skills, and negotiation experience is required.
•Experience with EVMS is highly preferred.
•Must be familiar with Microsoft Office applications and able to learn other IT systems.
 
Job Number: 52283
Job Location: St. Louis, MO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 3+ months
Start Date: 9/11/17
Input Date: 09/07/2017
Last Updated: 09/11/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contracts Manager

Description:
Contracts Manager

Pay Rate: $75-85/hour
Location: St. Louis
Duration: 3-6 months

NO Clearance required

Lead the contracts administration team and prioritize workflow to support customer and internal business objectives. Review RFP/RFQs, support proposal activities and participate as required in negotiations. Oversee the administration of contracts of sale and other terms of business. Lead the team on high dollar value proposals, negotiations and other complex contractual issues.

Principal Responsibilities:

1. PRE-CONTRACT ANALYSIS

• Evaluation and assessment of risk for proposed new/sustaining business

• Ensure new business meets company business objectives

• Prepare business cases evaluating investment, profitability, and returns of new proposals; present and defend business cases to management.

• Prepare commercial/technical volumes and proposals for submittal to customers, including TINA compliant proposal packages when required.

• Serve as liaison between client and clients customers for pricing and contractual matters.


2. CONTRACT NEGOTIATION

• Negotiation of sales contracts including pricing and other terms of business with customers

• Preparations of non-disclosure and other company agreements where appropriate

• Ensuring limit of liability coverage with customers where appropriate

• Negotiation and coordination of all issues with the customers pertaining to contractual matters.


3. CONTRACT MANAGEMENT & REVIEW

• Review assigned customer Contracts and Purchase Orders and issue internal client Work Authorization for distribution throughout the company.

• Contract Administration, including coordination of changes with the customers, assertion development/negotiation, assistance in cash collection, contract closeout, and other administrative matters.

• Learn and fully understand customer contract requirements, communication methods (including portals), metrics, and be able to assure client business processes effectively support and align as needed to execute successfully on customer requirements.

• Interact with customers and internal company disciplines as needed ensuring contract compliance.


4. OTHER RESPONSIBILITIES

• Manage progress payment schedules and provide financial forecasts to management as required.

• Ensure compliance of sub-contractor proposed cost or pricing data, within the requirements in FAR Part 15 as applicable.

• Conduct fact finding of supplier proposal data (including at sub-contractor locations as needed), to assure supported basis of estimates and documentation.

• Support the Program Office to assure all items that affect communication, cost, schedule, etc. are properly managed from a contractual perspective in a timely manner.

• Support customer and third party audits, and audit requirements, fully.

• Other duties as required.

Education

Bachelor’s degree required (Contract Law, Business Administration, or related field). MBA in business or related discipline is preferred.
Experience and Qualifications

• Must have a minimum of 10 years Government Contracts experience
• Must have experience with high level bids and proposals
• A minimum of seven years of experience in a business and/or manufacturing environment preferably in the commercial and/or military aerospace market is required. Significant or extra-ordinary experience or education may be considered in lieu of ten years of experience.
• Working knowledge of FAR/DFAR requirements, including most aspects of the preparation and support of TINA compliant proposal packages is required.
• Understanding of basic business financials, including rate structures, cash flow analysis, and basic financial calculations is required.
• Comfort and familiarity with engineered products in a manufacturing environment is preferred.
• Good analytical/judgment skills and a good financial acumen are required.
• Effective interpersonal skills, written communication skills, and negotiation experience is required.
• Experience with EVMS is highly preferred.
• Must be familiar with Microsoft Office applications and able to learn other IT systems.









• Minimum 10 years of United States Government Contracts experience
• Customer Focused
• Extensive experience with high level bids & proposals
• Relationship builder & problem solver
• Extensive negotiation skills
• Compliance experience
• Temporary position up to 3 months
• Overtime available
• Reports to Vice President, Commercial
• $75 - $85 per hour, negotiable for a perfect fit
• Work Location - St. Louis
 
Job Location: St. Louis, MO
Rate: $75-85/hr
Per Diem: yes
Overtime: possible
Duration: 3-6 months
Start Date: asap
Input Date: 09/01/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
All candidates must have a Bachelor’s degree to apply.

RESPONSIBILITIES
• Reviews Engineering design documents consisting of drawing, engineering order and parts list for consistency with company standards, design quality, requirements and its corrective interpretation.
• Also reviews 3D models used to produce 2D design are properly associated and provide repeatability and correct representation in the Digital Aircraft Model.
• Constant Interaction with Design teams to review/discuss issues and agree on acceptable solutions

TASKS
• Check Drawing, Engineering order and parts list for adherence to company standards.
• Check 3D information in CATIA and PLM System clearly describe and annotate issues found to designer and engineering design field
• Work with design team to solve issues identified
• Consult with design team and other checkers for interpretation provide inputs to management on major issues being identified and help develop alternatives for solutions

REQUIREMENTS
• 10 plus years of experience designing mechanical and/ or structural parts, assemblies or installations for aircraft
• 7 years of experience with CATIA and PLM Systems (preferably Teamcenter)
• 5 years of experience working with GD&T
• Very familiar with aircraft production and assembly methods
• BS Mechanical or Aerospace Engineering
• Experience with Composite materials a Plus
 
Job Number: 28-016
Job Location: Greensbo, NC
Rate: $48-$60 DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/20/2017
Last Updated: 12/18/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafting Checker (aerospace)

Description:
Drafting Checker
Greensboro, NC: location
Duration: 9+ months
contract rate: DOE

Job Summary
Design Checker
Desired Skills
ROBOTICS;CATIA;Design Checker
Job Description Rich
 
General Summary: 
Review Engineering Design Documentation consisting of Drawing, Engineering Order and Parts List for consistency with company standards, drawing quality and drafting requirements. Also review 3D dataset to ensure correct design representation in the Digital Aircraft model.
 
Duties and Responsibilities:
1.     Check Drawing, Engineering Order and Parts List for adherence to company standards;
2.     Check 3D dataset in CATIA V5 and PLM System.
3.     Participate to design reviews and provide guidance to design team regarding drafting rules and dimension & tolerance requirements.
4.     Collaborate with Design and Integrated Product Teams to solve issues identified during the reviews.
5.     Document and communicate issues found during reviews.
6.     Consult with design team and other checkers for interpretation or drafting rules.
7.     Act as a Subject Matter Expert regarding interpretation and application of drafting rules.
8.     Provide inputs to management on major issues being identified and help develop alternatives for solutions.
 
Education, Work Experience, Certification and/or Licensure:
1.     10+ years of experience designing mechanical and / or structural parts, assemblies or installations for aircraft.
2.     At least 7 years of experience with CATIA and PLM Systems (preferably Teamcenter).
3.     5 years of experience working with GD&T and 5 years of experience checking Aerospace Drawings.
4.     Candidate must be detail oriented.
5.     BS Mechanical or Aerospace Engineering.  Experience can used in lieu of education.
6.     Experience with composite materials is a plus.
 
Knowledge, Skills and Abilities:
1.     Familiarity with aircraft production and assembly methods.
2.     Ability to address issues identified in a direct but respectful way.
3.     Ability to consistently apply defined criteria.
4.     Able to work with people with diverse corporate / design culture background.
Physical Requirements:
1.     Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2.     Incumbents may be required to sit, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3.     Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
4.     Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
5.     Read, hear, speak, and see with no restrictions, as required by job duties.
6.     Comprehend and adhere to management directions and/or safety instructions with no restrictions.
7.     Effectively communicate in Business English language.
8.     Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
9.     Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.  
 
 
Notes
401K
6 paid holidays
Annual bonus

The Structures Company LLC is an AA/EOE.
 
Job Location: Greensboro, NC
Rate: open
Per Diem: yes
Overtime: possible
Duration: 9_+ months
Start Date: asap
Input Date: 09/29/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS Flammability

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

We are looking for an ECS Engineer with a focus on Flammability

Responsibilities:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Verifying Comportment ventilation and drain from the view point of fire marshal
Engine and APU Compartment Ventilation/Fire extinguisher from the viewpoint of fire marshal
Prepare test reports.
Domestic and occasional international travel is required.
Requirements:

Flammable Fluid Test, Report, Document, Design for company and certification
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 09/09/2017
Last Updated: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First


Unique Skills:
-Experience with Autocad required; Aerospace experience required.
-Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required.
-Be Familiar with CFR 14 Part 25 and AS50881.
-Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts.
-Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.

Job Description:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7059
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 05/22/2018
Last Updated: 05/23/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineering

Description:
UNIQUE SKILLS
Experience with Autocad required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-736-93664
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Washington)

Description:
Electrical Engineer

Location: Everett, Washington
Duration: 6 months
Rate: up to $55/hr


Primary Responsibilities
Summary
This position is responsible for leading assigned designs in the engineering department utilizing established modeling and design standards.  The Design Engineer will support design and development of engineering packages based on customer and OEM requirements for production, retrofit applications and product development.
 
Tasks Performed
 
Essential Duties and Responsibilities include the following with other duties as assigned:
Assigned design tasks include but not limited to: basic aircraft electrical design, wiring  installations, wiring diagrams, cable assemblies/harnesses, detailed assemblies and  internal specifications.
Works under the direction of an engineering manager, maintains or modifies basic electronic/electrical system/subsystems based on defined requirements using approved processes and tools.
Participates in teams to support the development of designs. Supports the documentation of design implementation.
Obtain, interpret, and analyze OEM airplane install drawings using approved processes and tools.
Obtain, interpret, and analyze OEM airplane electrical design data.
Provides technical, design and informational support for airplane modifications (including full-time on-site modification support and on-call home-team support), manufacturing support and/or in-service issues.
Troubleshoots basic electronic/electrical system/subsystems problems.
Actively support engineering department goals and initiatives.
Coordinate with other departments as necessary.
Utilize internal drawing/document standards per customer or regulatory agency requirements.
Some domestic or international travel may be required.
Perform engineering design check and sign documents.  With periodical technical Provides technical, design and informational support for complex production, product support or in-service issues. Effectively troubleshoots difficult, intermittent, chronic or complex system problems.
Perform analysis of engineering designs including but not limited to Electrical Load Analysis (ELA), System Safety Assessment (SSA), Transverse Separation Analysis (TVSA), etc.
Define and oversee Design Validation testing including but not limited to Engineering Functional Testing, EMI Ground/Flight Testing, etc.
Define engineering task scope (such as work scope validation) for design tasks.
Perform engineering design/analysis with minimum technical guidance.
Provide junior level mentoring and performance management input to PE/Functional Manager.
Perform engineering design approvals (design/approval authority) and task scheduling (such as detailed schedule of a given task per program requirements).
Perform engineering design analysis and validation (such as engineering development testing, airplane and component functional test procedure, HALT, HASS, component qualification testing per RTCA/DO-160, etc).
Perform engineering project scope review, project time estimates and project RFQ commitment, along with resources planning and assignments.
Act as design authority for design tasks.
Define engineer tasks for PE/functional manager.
Desired Education
BS degree Electrical Engineering, Aerospace Engineering or related Engineering field preferred
Desired Degree
BS degree Electrical Engineering, Aerospace Engineering or related Engineering field preferred
Desired Job Experience

Education and/or Experience
BS degree Electrical Engineering, Aerospace Engineering or related Engineering field and 8 years or more of experience or equivalent working experience (18 years minimum in an aerospace related field).  Education level required, and amount of relevant experience required here.

Notes:
Should have Aircraft Modification or Retrofit Experience, Electrical background.
experience in any of the following
Aircraft Installations
Boeing Aircraft preferably 777
AutoCAD
Electrical Systems design
Wiring Diagrams
Harness design
Cabin Databases and Lighting Databases is a plus

The Structures Company, LLC is an AA/EOE
 
Job Location: Everett, WA
Rate: up to 55/hr
Per Diem: yes
Overtime: possible
Duration: 6 mos +
Start Date: asap
Input Date: 12/13/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
• Responsible for developing, modifying and implementing electrical power distribution and avionics system designs
• Originate specifications, control documents, test plans, test reports, and / or other documentation in support of repairs, and STC electrical power distribution and avionics alterations, design and development activities
• Support project efforts to interpret customer requirements into system requirements and specifications
• Prepare material for, and conduct periodic design reviews
• Apply certification, inspection and maintainability requirements to the design
• Ensure that all specifications, designs and developments adhere to civil aviation, technical and aerospace industry standards
• Provide support in the development and maintaining of configuration baselines for aircraft / avionics systems and sub-systems
• Familiar with computer-aided design and drafting packages including AutoCAD
 
Input Date: 08/30/2017
Firm Name: JOHNSON SERVICE GROUP
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer reports to the Engineering Manager. The Electrical Engineer plans, designs, and oversees the installation, operation and maintenance of electrical/electronic components, equipment, and systems. Furthermore, acts as a focal point/ individual contributor with respect to electrical and electromagnetic compatibility compliance to industry/regulatory requirements and standards for airborne applications such as RTCA DO-160 or MIL-STD-461E.
Electrical Engineer performs conventional, moderately complex engineering assignments that may involve component, equipment or product design, simulation, testing, and preparation of specifications, process studies, and/or research investigations. Instructions are provided on task specifications and design constraints. Close guidance on new design or applications is provided.


JOB RESPONSIBILITIES

• Applies standard engineering techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.
• Performs low to medium complex circuit/wiring design activities and, subsequently, prepares appropriate validation and verification means.
• Supports product certification/qualification with subject matter knowledge and exercise professional judgment whilst supporting other business functions.
• Typically focuses on existing products or processes.
• Liaises with drafters, technicians, and others to contribute to project completion.
• Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.
• Performs other related duties as required.



MINIMUM REQUIREMENTS:
• Bachelor's degree in Electrical Engineering from an accredited four-year college or university; and three-to-five years related professional experience and/or training; alternatively, an equivalent combination of education and experience.
• Aerospace industry experience is strongly preferred.
• Must be proficient with basic physical laws/techniques as applied in electrical engineering (e.g. Ohm’s Law, Kirchhoff’s Laws), electromagnetic characteristics of materials, electrical circuit theory, two-pole and four-pole theory, Maxwell equations, and basic linear/digital/power electronics.
 
Job Location: Everett, WA
Rate: Negotiable
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/17/2017
Last Updated: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer

Description:
Electrical Harness Installation Engineer
Savannah, GA
Rate: $58-$63

Unique Skills:

Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned
 
Job Number: 7231
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/23/2017
Last Updated: 10/03/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer-Special Missions

Description:
UNIQUE SKILLS
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 17-783-115282
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer - Special Missions

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract (1-4 years)
Shift:1st Shift


Unique Skills:
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

Job description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 7876
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/09/2018
Last Updated: 03/12/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness installation Engineer

Description:
UNIQUE SKILLS
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 17-676-94842
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Manufacturing Engineer - Aerospace

Description:
Electronic Manufacturing Engineer - Aerospace and Defense

Ingenium Technologies - San Diego, CA
Contract- Contract to Hire

Must be a US Person.

A Manufacturing Engineer - Contract - is needed for a proven and reliable world leader in Aviation Air-to-Ground Communications, Aircraft Systems and Tactical Reconnaissance Radars, as well as advanced high-resolution Surveillance Systems.

Responsibilities:

Support the design, first article, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all platforms. Assemblies will include surface mount as well as through hole technology and mechanical assembly

Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.

Specify and implement automation equipment and processes.

Identify and assist in addressing safety issues on the manufacturing floor.

Support manufacturing production planning and coordination, execution and operations process development.

Provide production support to assemblers and leads.

Document manufacturing processes and assembly work instructions in conjunction with T&O Planning.

Design shop aids and tooling to assist production.

Disposition non-conforming parts, identify root cause, and implement corrective and/or preventive action to reduce scrap and rework.

Collaborate with Design Engineering during prototype, development and first article manufacturing.

Clearly and effectively communicate both verbally and in written form to both technical and non-technical audiences, especially regarding manufacturing processes, engineering issues and proposed changes, and quality issues and dispositions.


Software Requirements:

Experience with SAP, Microsoft Office Project and Visio
Database knowledge in Oracle and FileMaker


Required Experience:

5 to 15 Years experience in aerospace composite manufacturing, processing and materials knowledge.
Experience with IPC & MIL standards, including: IPC/WHMA-A-610 and 620 , J-STD-001
Knowledge of the requirements for Soldered Electrical and Electronic Assemblies, MIL-STD-1553 %u2013 Digital Time Division Command/Response Multiplex Data Bus, MIL-STD-1760 %u2013 Aircraft Electrical Interconnection System, SAE-AS39029 (MIL-C-39029)
Experience implementing capital equipment in factory environment.
Experience with MRP systems, eg SAP or MTO/WDS. Experience with Microsoft Office Project and Visio.
Experience with programming and databases, e.g. Oracle and FileMaker. Knowledge of SQL.
Experience with process mapping and demand flow technology
Strong background in electro-mechanical assemblies.
Six Sigma Green Belt preferred


Required Education: Bachelor's degree is required.

Position: Contract to Hire, 6mos or longer


Location: San Diego, CA


Employment Criteria : This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Citizen, who does not work for a foreign company/foreign government/foreign governmental agency or organization, and is in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 95014
Job Location: San Diego, CA
Rate: $55.00
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: Now
Input Date: 09/13/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: David Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine Control Logic Analyst

Description:
Engine Control Logic Analyst

Jupiter, FL
1 year Contract
Pay Rate: $60.00-70.00/Hr

1st Shift

Duties:
Engine Control Logic Analyst to support Hypersonics program.



** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage, Sterling or Talentwise. See attachment for specific background check onboarding requirements **



Keywords:

-Hypersonics

-Control Systems

-Requirements

-Programming

-Embedded Software

-Logic

Skills:
Required:

Familiarity with industry standards for engine control software design (P&W SEPG-0-000, NASA NPR 7150.2A, ISO 12207, DO-178C or other industry standard).
Good technical writing skills.
Project/schedule management skills.
Requirements generation skills.
Ability to translate engine operation requirements into engine control logic flow diagrams.
Proficiency with MS Office: Word, EXCEL and Powerpoint.
Desired:

Experience/proficiency with the following tools and computing platforms is desired: Windows, Alpha/VMS, C Programming, Pictures-to-Code, Matlab/Simulink, Unigraph.
Experience with linear model generation and control loop gain sizing and stability analysis.
Familiarity with Aerojet Rocketdyne procedures (AR ENG-P-4.03.04)


Education:
B.S. or M.S. in Mechanical or Aerospace Engineering
 
Job Number: 7883
Job Location: Jupiter, FL
Rate: 50-70
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/12/2017
Last Updated: 11/27/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine Control Logic Analyst

Description:
Keywords:
-Hypersonics -Control Systems -Requirements -Programming -Embedded Software -Logic

Skill Required:
Familiarity with industry standards for engine control software design (P&W SEPG-0-000, NASA NPR 7150.2A, ISO 12207, DO-178C or other industry standard).
Good technical writing skills.
Project/schedule management skills.
Requirements generation skills.
Ability to translate engine operation requirements into engine control logic flow diagrams.
Proficiency with MS Office: Word, EXCEL and Powerpoint.

Desired:
Experience/proficiency with the following tools and computing platforms is desired: Windows, Alpha/VMS, C Programming, Pictures-to-Code, Matlab/Simulink, Unigraph.
Experience with linear model generation and control loop gain sizing and stability analysis.
Familiarity with Aerojet Rocketdyne procedures (AR ENG-P-4.03.04)

Education:
B.S. or M.S. in Mechanical or Aerospace Engineering
 
Job Number: SH375839
Job Location: Jupiter, FL
Rate: 70
Duration: 2 months
Start Date: ASAP
Input Date: 09/12/2017
Firm Name: CDI CORPORATION
Attention: Stephen Harwan
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine Control Logic Analyst with active secret URGENT FL

Description:
160331/7443403

Job Title: Engine Control Logic Analyst
Keywords:
Number of Positions: 3

Remaining Positions: 3

Duties:
Engine Control Logic Analyst to support Hypersonics program.



** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage, Sterling or Talentwise. See attachment for specific background check onboarding requirements **



Keywords:

-Hypersonics

-Control Systems

-Requirements

-Programming

-Embedded Software

-Logic

Skills:
Required:

Familiarity with industry standards for engine control software design (P&W SEPG-0-000, NASA NPR 7150.2A, ISO 12207, DO-178C or other industry standard).
Good technical writing skills.
Project/schedule management skills.
Requirements generation skills.
Ability to translate engine operation requirements into engine control logic flow diagrams.
Proficiency with MS Office: Word, EXCEL and Powerpoint.
Desired:

Experience/proficiency with the following tools and computing platforms is desired: Windows, Alpha/VMS, C Programming, Pictures-to-Code, Matlab/Simulink, Unigraph.
Experience with linear model generation and control loop gain sizing and stability analysis.
Familiarity with Aerojet Rocketdyne procedures (AR ENG-P-4.03.04)


Education:
B.S. or M.S. in Mechanical or Aerospace Engineering


Skills:
Required

ENGINE CONTROLSCONTROL SYSTEMSREQUIREMENTS ANALYSISEMBEDDED SOFTWAREAEROSPACE


State/Province: Florida
City/Town: Jupiter

Start Date: 10/02/2017 Hours Per Week: 40.00
Est. End Date: 12/31/2017 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7443403
Job Location: Jupiter, FL
Rate: 70/hr max
Duration: 12 month contract
Input Date: 09/25/2017
Last Updated: 10/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician 4 Computer Aided Metrology

Description:
Work Schedule: 4/10 - (2nd shift)

Engineering Technician 4 Computer Aided Metrology.

We are looking for highly motivated individuals that are willing to work in a fast paced manufacturing environment covering multiple programs. Candidate will be required to use highly sophisticated computer aided metrology equipment that will require knowledge of multiple software applications. Candidate will have responsibility for overseeing lesser skilled employees assisting them with their training and development in the computer aided metrology field.

Basic Qualifications:

High School Diploma/GED plus 10 years of experience.

Position requires Assembly Tooling and or composite tooling background with assorted Computer-Aided Measurement Systems (C.A.M.S.) and an emphasis on (FARO-LEICA-API) Laser Tracking Interferometer or non-Interferometer Systems (minimum 10 years). Experience in data collection for the Validation/Verification of Tooling and Engineering. This position requires experience working with Manufacturing Engineering developing solutions to highly complex mechanical problems. Also working with Engineering for dispositions and best methodology to make repairs. Analyze and advise on data results. Must be proficient in Microsoft suite. Ability to work on high ladders and portable platforms, heavy lifting as well as standing for long periods of time. Candidate may be required to work any shift as well as overtime as necessary. High school diploma or equivalent required. Working knowledge of Photogrammetric laser radar systems and laser scanning systems and articulating arms. Theodolite systems are also required. Computer aided graphic interfaces such as Verisurf X, SA and Maya matrix Build!IT and Polyworks.

Preferred Qualifications:

Familiar with multiple computer aided metrology systems such as laser trackers, articulated arms, scanners, projection lasers etc. Experience and background in design of tools and assemblies is also very much desired. Experience in 3D modeling systems such as Catia UG is a plus. Preferred experience and the ability to analyze collected data to computer models using CATIA V5 R22 or later. Assist in the assignment of personnel to support all Aerospace Systems computer aided measurement tasks. Advise and Train personnel in the usage of C.A.M.S. with O.J.T in addition to classroom time and assist in the certification testing. Implement Lean Thinking in the operations and documentation of C.A.M.S. Experience in reverse engineering and model building from collected data.
 
Job Number: 1614
Job Location: Palmdale, CA
Rate: DOE
Duration: 12 Months
Input Date: 08/21/2017
Last Updated: 09/25/2017
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
External Loads Engineer

Description:
External Loads Engineer
Contract duration: 9+ months
Location: Greensboro, NC
RAte: Open, DOE

Desired Skills
C++;LINUX;UNIX;NASTRAN;PATRAN;FORTRAN;External Loads Engineer

Job Description 
External Loads and Dynamics Engneer
 
General Summary: 
 
Responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.
 
Duties and Responsibilities:
Applicant will define and validate aircraft flight and ground loads through simulation/calculation using established theory and methods.
 
Qualifications
 
Education, Work Experience, Certification and/or Licensure:
BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
Applicant shall possess a minimum of 6 years’ experience in aircraft external Loads analysis with preferably 10 years’ experience, including static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements.  Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable
Knowledge of, and experience with, dynamic aeroelastic analysis is desirable
Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable  
Strong knowledge of CFD principles and CFD-based modeling , along with wind tunnel test data usage for Loads analysis, is required
Proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required
Knowledge of mass properties principles as they relate to loads analysis required.
Knowledge and experience with cable-driven / mass-balanced flight control systems required
Experience with flight test data analysis related to structural design loads substantiation, as well as a demonstrated ability or experience with development of computational methods relating to loads analysis
 
 
 
 
 
 The Structures Company is an AA/EOE.
 
 
Notes
US Citizen, Or Greencard holder.
401K
6 paid holidays
Annual bonus
 
Job Location: Greensboro, NC
Per Diem: yes
Overtime: possible
Duration: 9+ months
Start Date: asap
Input Date: 09/13/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

External Loads Engineer

Description:
Responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.

Duties and Responsibilities:
Applicant must be able to define and validate aircraft flight and ground loads through simulation/calculation using established theory and methods.

Education, Work Experience, Certification and/or Licensure:
1. BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
2. Applicant shall possess a minimum of 6 years’ experience in aircraft external Loads analysis with preferably 10 years’ experience
3. Excellent communication skills both written and verbal
4. Experience and demonstrated proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required. Python experience and/or proficiency is desirable.

Knowledge, Skills and Abilities:
1. Knowledge of static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements. Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable.
2. Knowledge of, and experience with, FAA FAR 23 and EASA CS 23 Loads regulatory requirements and means of compliance is required, and experience with FAA FAR 25 and EASA CS 25 Loads regulatory requirements and means of compliance is desirable.
3. Must be proficient in generating documentation to support certification efforts related to external loads.
4. Knowledge of, and experience with, dynamic aeroelastic analysis is desirable. Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable.
5. Strong knowledge of CFD principles and CFD-based modeling, along with wind tunnel test data usage for Loads analysis, is required. Applicant must be able to communicate aerodynamic, structures and systems discipline input needs to ensure accurate load set development and conveyance.
 
Job Number: 28-031
Job Location: Greensboro, NC
Rate: $70-$75/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 09/19/2018
Last Updated: 10/15/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Sciences

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.

Seeking multiple contract or fulltime Flight Sciences Engineers to join the teams in Seattle and Moses Lake with at least five years� experience in flight sciences, including:
- Stability & Control
- Aircraft Performance
- 6DOF Flight Simulation

Essential functions:
� Define and validate flight test specifications
� Perform data review and analysis for verification of aircraft level requirements
� Utilize flight simulation models and data
� Support ground and flight test activities
� Prepare flight test reports

Desired Qualifications:
� Flight Sciences Engineer with experience with FAA Part 25 or Part 23 aircraft certification
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor or advanced degree in Aerospace Engineering.

If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Seattle, WA
Per Diem: possible
Overtime: Yes
Duration: lt
Start Date: asap
Input Date: 09/09/2017
Last Updated: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Controls -

Description:
Johnson Service Group is seeking a Flight Test Controls for a 15 month contract in West Palm Beach, FL!

The applicant will need to work in West Palm Beach, FL for the first four to six months of the assignment in order to become familiar with the aircraft and the test requirements. The applicant will then likely be expected to move to Patuxent River, MD as the program shifts testing to be conducted from there.

Description:

Plan, conduct, manage and report flight control systems and handling qualities flight tests.
Test planning function involves determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
These details are written into published test plans. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
Large volumes of gathered flight data are processed, analyzed, and reported. These results are written into published test reports.
Work closely with the handling qualities and flight controls design engineers to become familiar with the flight control system hardware components and software, specifically control law design. Quickly identify problems on the test aircraft, troubleshoot the issue, and work with design engineering to implement a solution.
Utilize Mat lab to analyze flight test data and work with control laws.
Fly on board experimental aircraft to conduct test flights, modify software flight test variables, and collect data.
Experience:

Minimum of a Bachelor's degree in Aerospace Engineering, Mechanical or Electrical Engineering. Master’s degree a plus.
Minimum of 4 years of fixed/rotary wing flight control systems and handling qualities flight test engineering experience.
Fly-By-Wire experience preferred. Analytical thinking, troubleshooting, problem solving, and communication--written and oral. Technical writing.
Matlab/Simulink, Microsoft Office applications. General aviation knowledge; pilot license is preferred.


Additional Notes

The job involves significant teamwork and coordination with flight test co-workers in a variety of disciplines (pilots, mechanics, inspectors, instrumentation and data technicians), qualification or certification authority representatives and subject matter expert design engineers. The applicant will also team with design engineering by participating in simulation testing. Good interpersonal skills are imperative. Personal flexibility is required to occasionally support unusual working hours.
 
Job Number: 356488
Job Location: West Palm Beach, FL
Rate: $39hr
Per Diem: yes
Overtime: possible
Duration: 15 months
Start Date: asap
Input Date: 08/04/2017
Last Updated: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

Essential Functions:
Coordinate test and certification requirements.
Author flight test and ground test plans including test hazard analysis.
Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
Support instrumentation installation as required.
Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
Support flight and ground test conduct and data collection.
Analyze test data and evaluate compliance with regulations.
Prepare certification test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 11/30/2017
Last Updated: 12/07/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineers

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
This position will be in the Test and Evaluation Support unit, which has four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

The Instrumentation Engineer is responsible for supporting the operational and technical success of the instrumentation group. This person works closely with all other Instrumentation Engineers, Technicians, other T&E Support Staff to meet instrumentation requirements.

Job Duties and Responsibilities (Essential Functions):

� Provide instrumentation services: to include:
o production of instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
o Ensuring that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
o Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
� Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs. Works closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.
� Support Program Teams: Works with OEM & STC program and project managers with technical resources requirements. Fully supports the test planners in regards to their instrumentation needs.


Knowledge/Skills/Abilities:
� Intermediate knowledge skills and competency of Flight Test Instrumentation (FTI) and data equipment for the purpose of recording and monitoring parameters fitted to experimental aircraft including associated of industry processes and practices to include:
o Electrical and avionics design,
o Data Systems Design Principles
o Telemetry
o Air data booms (straight nose and swivel-head)
o Static trailing cones
o Sensitive aircraft instruments
o Cockpit displays
o End-user interface
o Portable test equipment such as hand-held stick force gauges
o High-end GPS receivers and antennas for precise aircraft positioning
o Position transducers - sting potentiometers, rotary potentiometers, LVDTs, RVDTs
o Pressure transducers
o Flowmeters
o Temperature sensors - thermocouple wire/probes/assemblies, RTD probes, thermistors, glass bulb thermometers
o Strain gauges, load cells, force transducers, torque sensors
o Portable weather stations - wind speed/direction, outside air temperature, relative humidity
o Video recording equipment
o Signal conditioners
o Data acquisition systems and data loggers
� Intermediate knowledge of flight test operations and flight certification.

Level Requirements (Minimum):
Education
� Formal Instrumentation Training (Military or Civilian) � Preferred
� BS in Engineering or equivalent experience

Experience
� 5+ years relevant technical experience
� Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.
 
Job Number: #301-Flight Test Instrumentation
Job Location: Moses Lake, WA - Washington
Rate: Open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: ASAP
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Software Engineer

Description:
DUTIES:Simi Valley, California 93065

• Develop System Test Plans, execute simulator and system flight tests, and document test results. This includes determining, communicating, and documenting flight test objectives, and developing test cards accordingly.

• Participate in flight readiness reviews, test event briefs, and post-test debriefs with UAV Operators and Observers.

• Coordinate the use of test ranges with UAV Operators and Observers.

• Ensure test assets are prepared to support testing, including checking that product hardware and software are properly configured, test cards and procedures are written, equipment is operational, batteries are charged, etc.

• Participate in test activities, fill in test data sheets, and transfer telemetry files to the network.

• Debrief engineering and management team on results of flight and simulator tests.

• Capture test failure details in defect reports, using an issue tracking system, like Bugzilla or JIRA.

• Position may require up to 25% travel.



QUALIFICATIONS:

• Bachelor’s Degree (strongly preferred) from an accredited University in Electrical Engineering, Software Engineering, Aerospace Engineering, or a related discipline.

• 7+ years of experience in multiple engineering projects including research and development efforts, with a focus on unmanned aircraft systems, simulation, integration, and test. Demonstrated ability to successfully contribute to successful short term projects (3 – 9 months).

• Familiarity with unmanned aircraft systems, including avionics, power, and Ground Control Stations (GCS’s).

• Minimum 3 years of experience conducting system tests or flight tests.

• Ability to develop ad hoc tests to troubleshoot test failures.

• Ability to analyze test data using software tools like MATLAB or Excel.

• Desired hands on lab experience in test engineering, including use of test and measurement equipment.

• Strong computer skills including Microsoft Office, engineering analysis tools (e.g., MATLAB, Simulink), and software development environments (e.g., Visual Studio).
 
Job Number: WW081817AERO
Job Location: Simi Valley, CA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 YEAR
Start Date: ASAP
Input Date: 08/18/2017
Last Updated: 10/04/2017
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Jr Project Manager (Contract or Direct)

Description:
Our client in the Portland, OR area is seeking a MS Project and Office365 expert in the Aerospace Industry. Looking to move quickly for the right candidate. Only JR level candidates should apply.
STC and/or Retrofit a huge plus
 
Job Location: Portland, ORE
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 1+ yrs
Start Date: ASAP
Input Date: 09/13/2017
Firm Name: AVIATION CONSULTING EXPERTS INC
Attention: Brook
Address: 13901 AVIATOR WAY
City, State: FORT WORTH, TX 76177-4308
Phone: 817/952-9193
Fax Phone: 817/231-0133
Website: www.aviationaces.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Loads & Dynamics Analysis Support

Description:
Candidate will provide loads and dynamics analysis support for the SLS program launch and space vehicle hardware. Providing expertise on loads and dynamics of launch vehicles and spacecraft, including finite element and hand calculations and the determination of mode shapes, frequencies, stresses and deflections caused by transient loads, thermal conditioning and environments, random vibration and static loading conditions. Translating loads and dynamic criteria to requirement verification closure statements.

Required: B.S. degree and 25 years previous experience on NASA and/or Launch Vehicle design and analysis. M.S degree and 20 years previous experience on NASA and/or Launch Vehicle design and analysis. Minimum of 20 plus years’ experience in aerospace loads and dynamics analysis. Experience in launch vehicle analysis of pre-launch, liftoff and ascent flight mechanics analysis as it relates to loads and dynamic analysis.

NASA and/or Launch Vehicle design and analysis experience REQUIRED.

Desired: SLS experience preferred.
review all current openings at www.hi-tecsolutions.com/jobs
 
Job Number: 213
Job Location: Huntsville, AL
Rate: 75.00
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: asap
Input Date: 09/19/2017
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: 2501 E PIEDMONT RD STE 103
City, State: MARIETTA, GA 30062-7753
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintainability Engineer III

Description:
1) Maintainability Predictions in accordance with MIL-HDBK-472, and 2) Maintainability Analysis Reports to include conducting maintenance studies using MIL-HDBK-470A criteria to assess impact to Accessibility, Human Factors, Preventive Maintenance as a result of aircraft modifications. Catia skills highly desirable.

Principal Duties and Responsibilities
1. Coordinate and conduct maintenance program development activities in support of the scheduled maintenance program for existing or future aircraft programs maintenance tasks, maintenance skills, manning and documentation procedures, including off-sight presentations/meetings.
2. Evaluate fleet data to determine the feasibility of incorporating mechanical, materials, and/or procedural advancements that improve aircraft availability or the technicians ability to perform scheduled or corrective maintenance.
3. Evaluate methods that lead to the reduction of expended task man-hours and needed support equipment to affect maximum aircraft availability with minimum maintenance resources.
4. Utilize departmental, company, and industry resources to the maximum in developing maintenance practices for aircraft.
5. Coordinate the evaluation of current maintenance practices or suggestions to determine their feasibility/practicality for application to the fleet. Present Maintenance Program changes to the Customer based boards for review, acceptance and application to fleet inspection schedules.
6. Maintain liaison with maintainability/logistics groups, within the aircraft and aerospace industry, to stay abreast of new developments, component designs, and processes that may be applicable to maintainability functions and directly benefit scheduled maintenance programs.
7. Must independently exercise self-policing practices to ensure timely, effective follow-through and close-out of assigned tasks. Inform cognizant individuals of obstacles that hinder a successful conclusion.
8. Coordinate and lead major project activities. Review work of team members for technical and grammatical accuracy.
9. Perform dispatch reliability and aircraft availability information review and calculations.
10. Represent Maintainability Engineering in dealing with Regulatory bodies and officials.

Other Requirements:
1. Knowledge of aircraft inspection programs, Federal Aviation Regulations, aircraft systems and technical manuals including maintenance record systems required.
2. Proficient knowledge of MSG-3 Maintenance Program Development process.

Experience/Education Required
Bachelors degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience. A&P license preferred.

Seven years of related aircraft maintenance and operational experience required or equivalent aircraft experience.
 
Job Number: 24-186
Job Location: Savannah, GA
Rate: $62 to $67/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 11/07/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Our client seeking a 1st Shift Manufacturing Engineer to work on a contractual basis evaluating products and processes. The successful candidate will interface among designers, process improvement teams, quality control, field engineers, and production personnel.

Principal Duties and Responsibilities:

• Conduct projects and studies involving process or product improvements, process control and the analysis of technical problems with limited supervision and guidance.
• Evaluate the manufacturability of parts and assemblies and suggest improvements.
• Develop and document production and assembly processes and test procedures.
• Provide training and technical support to hourly personnel for new processes.
• Analyze and refine existing processes that do not consistently yield acceptable results.
• Analyze discrepant parts or units as required to determine whether a process problem exists.
• May participate on various teams for design review, configuration control, process improvement, etc., as assigned.
• Estimate production or rework labor for parts or assemblies.
• Performs all operations according to prescribed safety principles.
• All other related duties as assigned.

Required Qualifications:
• Bachelor of Science in Mechanical, Manufacturing, or Aeronautical Engineering, or a related discipline.
• 2+ years’ manufacturing/production engineering experience.
• Ability to conduct root-cause problem analysis and to develop appropriate corrective and preventive action.
• Ability to make independent judgments on technical issues.
• Ability to lift 25 lbs. occasionally, and work in an office, lab, shop floor, and indoor industrial environment.

Desired Qualifications:
• Familiarity with common aerospace sheet-metal fabrication and assembly processes.
• Working knowledge of Geometric Dimensioning & Tolerance.
• Practical experience with blueprint reading.
 
Job Location: Davenport, IA
Rate: Open
Per Diem: Yes, Split
Overtime: Possible
Duration: 6-12 Months
Start Date: ASAP
Input Date: 09/13/2017
Firm Name: AMERICAN CONTRACT GROUP
Attention: Derek Doucette
Address: 50 HIGH ST STE 46
City, State: NORTH ANDOVER, MA 01845
Phone: 978/984-5581
800 Phone: 877/723-9087
Fax Phone: 978/208-8246
Website: www.americancontractgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Location: Decatur, AL
Rate: $35.00 - $50.00/HR (DOE)
Duration: 6 month contract (possible extension)
Overtime: Exempt

Job Description:
- Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.
- Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.
- Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
- Adapts machine or equipment design to factory and production conditions.
- May incorporate inspection and test requirements into the production plan.
- Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.
- Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
- Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
- Ensures processes and procedures are in compliance with regulations.


Basic Requirements:
- Bachelor’s degree in Manufacturing, Mechanical or Aerospace Engineering
- Proficiency with Microsoft Office Applications (Excel, Word, PowerPoint, Project)
- Good oral and written skills


Preferred Qualifications:
- Exposure to CNC machining practices
- Training or experience developing and maintaining a manufacturing bill of materials
- Training or experience designing the arrangement of build fixtures and machines within plant facilities to ensure efficient and productive layout
- Knowledge of tool and equipment fabrication
 
Job Number: 7862
Job Location: Decatur, AL
Rate: $35.00 - $50.00/HR (DOE)
Per Diem: Split Possible
Overtime: No/Exempt
Duration: 6 mos
Input Date: 09/11/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Role: Manufacturing Engineer
Location: Cincinnati, OH 45242
Duration: 4 - 6+ months contract

Job Description:
Performs a variety of engineering work in planning, design and modification of fixtures, tools, and manufacturing processes. Resolves production problems and completes documentation on assigned parts. Interfaces with customers as needed. Generally, operates with appreciable latitude for non-reviewed action or decision-making. Has average to above-average knowledge and understanding of Electro-Chemical Machining (ECM) technologies and processes.
• Determines the sequence of operations in the manufacture of parts.
• Prepares and updates routers and operation sheets.
• Researches new manufacturing methods.
• Establishes manufacturing standards.
• Determines and troubleshoots manufacturing processes at all levels of complexity.
• Engineers tools, fixture and gauging modifications.
• Gives technical direction to CAD/CAM, production and inspection personnel as needed.
• Coordinates part inspection procedures with Quality Engineers.
• Addresses and documents cause and corrective action issues to prevent future problem occurrences.
• Interfaces with customers concerning design problems, part prints, etc.
• Performs other duties as assigned by management.

Requirements
• Bachelor’s Degree in mechanical engineering, manufacturing engineering, or equivalent experience and training.
• Minimum of 3 years’ experience (4-7 is preferred) as a Manufacturing Engineer II or the equivalent engineering experience in jet engine manufacturing processes, materials, and designs.
• Thorough knowledge of aerospace manufacturing and quality requirements.
• Average to above-average knowledge and understanding of ECM technologies and processes.
• Demonstrated ability to set up and operate ECM equipment.
• Proficient in the use of word processing, spreadsheet, and data base computer software (i.e. Word, Excel).
• Good interpersonal and communication skills.
 
Job Number: 52291
Job Location: Cincinnati, OH
Rate: open
Per Diem: Yes
Overtime: NO
Duration: 6+ months
Start Date: ASAP
Input Date: 09/11/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Arun
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 1

Description:
Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Duration: 1 year contract

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or to have had one with the last two (2) years**

Job Description:
- Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.
- Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.
- Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
- Adapts machine or equipment design to factory and production conditions.
- May incorporate inspection and test requirements into the production plan.
- Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.
- Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
- Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
- Ensures processes and procedures are in compliance with regulations.

Skill/Experience/Education
Mandatory:
- Mechanical, Electrical, Aerospace Engineering Degree.
- 1st, 2nd or 3rd shift schedules may be required.
- On-aircraft and off operations.
- In this role, the employee will review mechanical designs for ease of manufacturing and work closely with design engineering for improvements.
- The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions.
- This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists.
- The employee will work with manufacturing on issues and process improvements.
- Active Secret Security Clearance within the last 2 years.

Desired:
- Job scope experience
- Team Center Engineering experience
- Production Engineering experience
- Production Operations experience
- Mechanical Experience
- Electrical Experience
- Lean Six Sigma practices SOF CLSS contract, facility, and customer knowledge
- Ability to read and interpret engineering drawings
- Excellent verbal and written communications skills
 
Job Number: 7709
Job Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 08/02/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer 3

Description:
Manufacturing Engineer 3

Location: Ridley Park, PA
Duration: 6 months

Description:
Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Additionally Mandatory Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skills:
The following skills are preferred for this assignment. The level is intermediate
MES - (SAP Complex Assy Solutions), Teamcenter (Siemens PLM Software), Model Based Instructions (MBI) Authoring, Wire & Equipment Installation, Assy and Integration and Aerospace.

Skill Code:
66T-Electrical/Electronics.
 
Job Number: 17-15711
Job Location: Ridley Park, PA
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: 9/29/17
Input Date: 09/06/2017
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III - (PA) - Electrical/Electronics

Description:
Develops and implements production and tooling methodologies. Participates on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines. Develops, identifies and implements conceptual designs and maintains the program architecture for build. Leads and implements manufacturing plans. Conducts producibility and variation analyses to ensure that manufacturing process capability matches requirements. Assists in providing producibility information for inclusion in project plans and helps document producibility best practices. Analyzes design/build concepts to evaluate producible design/build definitions. Resolves technical problems of significant impact to performance, cost or schedule. Coordinates and implements new engineering principles, theories, advanced technologies and concepts. Validates and ensures production readiness of solutions to complex problems. Implements lean principles and technologies.

achelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

MES - (SAP Complex Assy Solutions), Teamcenter (Siemens PLM Software), Model Based Instructions (MBI) Authoring, Wire & Equipment Installation, Assy and Integration and Aerospace.
 
Job Number: MFGEeePA
Job Location: Ridley Park, PA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 10/15/2017
Last Updated: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer with active secret / extensive SAP experience CA

Description:
159848
Requirement #AERO-REQ-0604
Work location Palmdale, CA
Work Week 9/80-A
Priority High
Needed Date 07/14/2017
End Date 08/10/2018
Number of Resources 1
Security Clearance Secret

Title: Manufacturing Engineer
Description
Candidate will work in a manufacturing environment and work cross-functionally with operations team to support Manufacturing Execution System (MES) ERP4C. Candidate will work with core support team to troubleshoot, design and develop requirements for the MES system. Candidate will work trouble tickets, participate in design reviews and work with core IT/One Aero team on the development of new capabilities for MES system. Will be responsible for identifying system issues and making recommendations for corrections. Must have a thorough understanding of manufacturing process and procedures including fabrication, assembly and coatings in several disciplines including composites, metallics, machining, bonded assemblies, and installations. Must have previous experience in a manufacturing environment working cross functionally with other disciplines including industrial engineering, planning, scheduling and production planning. A thorough understanding of engineering blueprints, process specifications and facility lay-outs is required. Previous experience with lean manufacturing and process improvements is required.

Skill/Experience/Education
Mandatory:

Active Secret Clearance with investigations within the past 5 years.

SAP Superuser; Subject Matter Expert in SAP Bill of Materials & Production System Development. Enterprise Resource Planning (ERP) and Material Requirements Planning (MRP), System Deployment and System Development . Ability to work extended work hours to meet project schedule requirements.
Desired:

Masters degree from an accredited college in a related discipline. Understanding of LM Palmdale company policies, procedures and systems including SAP, One-Aero, ERP4C. Airframe and Systems Integration experience Working knowledge of aerospace organizations including: Planning, Quality, Prod Control, ERP, IT. Quality, etc. Certified Manufacturing Engineer, Greenbelt, Blackbelt or Lean Certification Independent creative thinking and problem solving

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Manufacturing Engineering Mfg. Eng. level 2 or 3 6-8 Years Yes


Interview Required Yes
OT Allowed Yes (#hours allowed: 15, Pre-Approval Reqd.:No)
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 45.00 USD
5-8 Yrs Pay Rate: 55.00 USD
9+ Yrs Pay Rate: 65.00 USD
 
Job Number: JE-0604
Job Location: Palmdale, CA
Rate: 45-65/hr DOE
Duration: 12 month contract
Input Date: 09/14/2017
Last Updated: 09/25/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Sustaining Engineer - hydraulic

Description:
Johnson Service Group (JSG) is searching for a Mechanical Sustaining Engineer, capable of providing technical guidance to assure the performance of hydraulic actuation components currently in service on commercial and military aircraft.

Summary of Job Scopes:

3-6+ years of related mechanical sustaining engineering experience, ideally with hydraulic actuators and hydraulic control valves, or similar products for the Aerospace Commercial and and Defense industries.
Requires mechanical engineering expertise with hydraulic control valves and hydraulic actuators.
Working knowledge of gears is a plus.
A qualified candidate will interface with the Quality Assurance and After-Market Organizations to support the investigation of field failures or internal proposed changes.
Responsible for interfacing with design and analysis engineering organizations to implement proposed design changes.
Requires working knowledge and understanding of requirements verification processes to assure the successful implementation of any proposed design changes.
Responsible for assuring the existence of artifacts that document the verification of any proposed design changes.
Position requires a working knowledge of data configuration management and change control process.
Responsible for interfacing with configuration management organization to assure the release and control of relevant configuration data.
Requires working knowledge of aerospace standards, i.e. relevant SAE ARP, FAA regulations & guidance, military standards, etc.
Working knowledge of ATA 2000 is a plus.
Responsible for determining the effort (hours) and the duration (time) required to generate all technical support for the sustaining activities.
May carry out complex or novel research assignments requiring the development of new or improved techniques and procedures.
May promote and implement process improvements company-wide.
May write product standards and design guidelines.
Education:

Bachelor's Degree in Mechanical Engineering or a similar technical discipline
Type of employment: Contract with potential for long term

Location: Duarte, CA
 
Job Number: 359944
Job Location: Duarte, CA
Rate: $45-$48hr
Per Diem: no
Overtime: possible
Duration: 12 months
Start Date: asap
Input Date: 08/15/2017
Last Updated: 09/26/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Model Based Systems Engineering (MBSE) Technical Specialist

Description:
Location: Canoga Park, CA
Rate: DOE
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
-The successful candidate will have experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
-Knowledge of Jazz Team Server (JTS) enterprise management is useful.
-An intermediate level of practice as a SysML Model User and Builder is desired.
-Understanding of how these applications are deployed and used in the aerospace industry is preferred.
-Rocket engine or propulsion system domain knowledge is desirable.
-The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.

Skills:
Required:
-Experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
-An intermediate level of practice as a SysML Model User and Builder is desired.
-The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.

Desired:
-Knowledge of Jazz Team Server (JTS) enterprise management is useful.
-Understanding of how these applications are deployed and used in the aerospace industry is preferred.
-Rocket engine or propulsion system domain knowledge is desirable.

Education:
-BS or MS in Engineering, Computer Science or related field is required.
-MS in Systems Engineering is desirable.
 
Job Number: 7755
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 08/11/2017
Last Updated: 11/14/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Model Based Systems Engineering (MBSE) Technical Specialist URGENT CA

Description:
160120/7326500
Canoga Park, CA
70/hr max
6 months

Model Based Systems Engineering (MBSE) Technical Specialist

Remaining Positions: 1

Duties: ** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

-The successful candidate will have experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
-Knowledge of Jazz Team Server (JTS) enterprise management is useful.
-An intermediate level of practice as a SysML Model User and Builder is desired.
-Understanding of how these applications are deployed and used in the aerospace industry is preferred.
-Rocket engine or propulsion system domain knowledge is desirable.
-The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.
Skills: Required:
-Experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
-An intermediate level of practice as a SysML Model User and Builder is desired.
-The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.

Desired:
-Knowledge of Jazz Team Server (JTS) enterprise management is useful.
-Understanding of how these applications are deployed and used in the aerospace industry is preferred.
-Rocket engine or propulsion system domain knowledge is desirable.
Education: -BS or MS in Engineering, Computer Science or related field is required.

-MS in Systems Engineering is desirable.



Skills: Required
• MBSE
• IBM RATIONAL SOFTWARE
• DOORS SOFTWARE

State/Province: California
City/Town: Canoga Park

Start Date: 09/04/2017 Hours Per Week: 40.00
Est. End Date: 03/04/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7326500
Job Location: Canoga Park, CA
Rate: 70/hr max
Duration: 6 month contract
Input Date: 10/11/2017
Last Updated: 11/29/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Procurement Engineer - Level 3

Description:
Procurement Engineer - Level 3

Location: Tampa, FL
Pay Rate: DOE ($25/hr - $45/hr)
Duration: 6 month contract
Shift: First, 5/40
Travel: Yes; Lackland AFB San Antonio, TX
***MUST have an ACTIVE SECRET CLEARANCE***

Description
-Coordinates with Subcontract Management Team, Procurement Engineering Management, Systems Engineering, the Suppliers (CAE USA) and Industry experts to facilitate the design, production, test and qualification of aerospace and defense products.
-Analyzes technical data, designs, preliminary specifications, manufacturing limitations, supplier facilities, and parts/equipment availability.
-Investigates and recommends potential suppliers based on assessments of response to specifications, costs, inspection of facilities, and historical performance.
-Facilitate technical trade-offs and standardization that may lead to more economical procurement.
-Recommends design changes or process improvement to mitigate production issues.
-Leads teams of Supplier and internal staff in collaboratively solving problems in Producibility, Quality, Inspection, Cost, Mistake-Proofing, Test, Reliability and Affordability while based in supplier facility and customer site.
-Provides technical solutions to a wide range of difficult problems.
-Solutions are imaginative, thorough, and practicable, and consistent with organization objectives.
-Works under general direction only and independently determines and develops approach to solutions.
-Work is reviewed upon completion for adequacy in meeting objectives.
-Reports directly to the Lead Procurement Engineer on the C-5 program.
-Provides surveillance and Quality Assurance direction to supplier while supporting the program needs.
-Experience with requirements management and flowdown to supplier.
-Reviews and approves Supplier Statements of Work (SSOW), technical specification, and supplier deliverables (SDRLs).
-Onsite Quality Assurance representative on program assuring data trend analysis, lean practices, process improvement, operating procedure compliance, quality control, supplier surveillance, containment activity, supporting TKOs/RBATs/PACs, continuous improvement, configuration management, and root cause analysis following AS9100, ISO9001, ASQ, and CMMI.

Skill/Experience/Education (MANDATORY):

-Quality Assurance (4-5+ years experience)
-Supplier Quality Assurance (4-5+ years experience)
-Hardware Engineering (4-5+ years experience)
-Test Verification/Validation (4-5+ years experience)
-Configuration Management (4-5+ years experience)
-ISO 9001: 2008 training (required)
-AS9100C training (required)
-Lockheed Martin Procure 2 Pay (P2P) training (required)
-Auditor training (required)
-Engineering or Technical 4-year Degree
-Process Improvement
-Purchase Orders
-Physical and Software Configuration Audits
-Source Inspections
-QMS
-Risk Assessment
-ASQ
-Corrective Action and Prevention
-Reliability
-Logistics
-Excel


Desired:
-Subcontracts Management (0-3+ years experience)
-Systems Engineering [aircraft avionics systems] (0-3+ years experience)
-Green Belt/Black Belt Certification
 
Job Number: 7345
Job Location: Tampa, FL
Rate: 25-45
Per Diem: Split Possible
Overtime: Yes
Duration: 6 mos
Start Date: ASAP
Input Date: 04/19/2017
Last Updated: 11/14/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer / Component Product Engineer II - III (Valves & Actuators) CA

Description:
160214/7333750
Job Title: Project Engineer / Component Product Engineer II - III (Valves & Actuators)

Number of Positions: 2

5 to 10 years of experience

Duties: ** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** This is NOT a Designer role. Please make sure that all candidates with a Designer background or expectation are aware of this **

** Manager likes to see college GPA's on resumes **


-Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.

Skills: -Experience with liquid rocket propulsion systems desired.
-Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.
-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.
-Demonstrated leadership skills are highly desireable.
Education: BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 3 years experience in related field. MSME/AE degree is highly desireable.



Skills: Required
• PROJECT ENGINEER
• COMPONENT ENGINEERING

State/Province: California
City/Town: Canoga Park



Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 03/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7333750
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 6 month contract
Input Date: 10/12/2017
Last Updated: 12/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer/Component Product Engineer II-III (Valves & Acutators

Description:
Location: Canoga Park, CA
Rate: $35.00 - $45.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** This is NOT a Designer role**
-Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.


Skills:
-Experience with liquid rocket propulsion systems desired.
-Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.
-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.
-Demonstrated leadership skills are highly desireable.

Education:
BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 5 - 10 years experience in related field. MSME/AE degree is highly desireable.
 
Job Number: 7823
Job Location: Canoga Park, CA
Rate: $35.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 10/11/2017
Last Updated: 12/18/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager

Description:
2 Positions Available.

•Responsibility for managing and delivering projects or work package/s with limited complexity to cost, schedule and technical performance.
•Definition and execution of the project management plan, to include responsibility matrix and cost and resource plans
•Tracking schedule, cost and resources
•Ensure that all required resources such as engineering, manpower, production, computer time, facilities, etc., are available for the project.
•Conducting formal cost and schedule variance analysis and development of any recovery plans required to eliminate schedule or cost variances.
•Participate/lead Program Reviews, Integrated Baseline Reviews (IBRs) and other project or management reviews.
•Coordinate the development, implementation and production cycle of new or modified products.
•Manage the efforts, cost, and schedule for engineering design and development, and for its integration into manufacturing.

Required Qualifications:
•Bachelor’s degree in Engineering, Business Administration, or related field.
•Minimum 2 years' project management. (Aerospace Industry Strongly Preferred)
•Demonstrated ability to interpret contracts, develop and administer budgets, and monitor programs including schedules and risk-control.
•Ability to plan and implement detailed projects and to create project overviews.
•Skilled in detail oriented work, but capable of seeing the big picture.
•Able to independently prioritize daily activities and meet department objectives.
•Demonstrated delegation capabilities and ability to lead Integrated Product Teams (IPT).
•Excellent writing skills, including the ability to read, write, and understand technical and financial proposals and reports.
•Capable of expressing ideas clearly and communicating effectively with employees at all levels in the organization, including the ability to prepare and make technical presentations to customers, vendors, small groups of mid- and top-level managers, and other stakeholders.
•Proficient with Microsoft Office PRO including Project and Visio, as well as databases, spreadsheets, etc.
•Able to travel internationally.
 
Job Number: 52260
Job Location: IA
Duration: 6-12Months
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Specialist Engineer

Description:
Description
This individual will provide Quality Engineering support to the assigned product team spanning the life cycle of the program; including design, development, production, test, and supplier support. An understanding of engineering drawings, specifications, and typical aerospace product assurance processes (dimensional inspection, NDT, source/receiving inspection, etc) is required.
Requirements
Essential Job Functions

15% - Utilizes engineering background and expertise to communicate quality requirements to product team members, in-house inspection personnel, and suppliers. Communicates quality issues to program and process management.


20% - Reviews engineering drawings for inspectability. Works with inspection process experts to develop special inspection techniques where necessary. Assures that fabrication and inspection requirements defined in engineering drawings/specifications are appropriate for the design and comply with customer and company quality requirements.



15% - Participates in design reviews with customers. Presents the product inspection plan describing how hardware acceptance processes will assure compliance with design, customer, and company requirements.

20% - Provides a clear and concise flow down of product definition and quality requirements to suppliers. Works closely with Supply Management and Supplier Quality to coordinate/resolve supplier issues.

15% Reviews product nonconformances. Assure adequate nonconformance description and appropriate disposition. Handles and communicates deviations/nonconformances at different levels within the organization. Interfaces with the Material Review Board (MRB) to describe impact of nonconformance (schedule, cost, performance, etc.) and explain technical justification for the hardware disposition.



10% - Drives corrective and preventative action activity both in-house and at the supplier, and provides corrective action board support to manage timely and effective problem closure and recurrence control.



5% - Prepares comprehensive analyses, procedures, reports and presentations for both internal and external customers.

Skills:
Effective verbal and written communication skills.
Strong interpersonal skills and ability to work within a close-knit team environment.
Valid driver’s license.
Education:
Bachelor’s degree in appropriate discipline and 9 years of directly related experience, or an equivalent combination of education and experience.
 
Job Number: 7337172
Job Location: Canoga Park, CA
Rate: DOE
Duration: 12 Months
Input Date: 09/11/2017
Last Updated: 10/04/2017
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Specialist Engineer

Description:
Quality Assurance Specialist Engineer

Canoga Park, CA
1 Year Contract
$50.00-54.00/Hr

1st Shift

Duties:
** Candidates must be U.S. Citizens **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Dual Citizens or candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible **

This individual will provide Quality Engineering support to the assigned product team spanning the life cycle of the program; including design, development, production, test, and supplier support. An understanding of engineering drawings, specifications, and typical aerospace product assurance processes (dimensional inspection, NDT, source/receiving inspection, etc) is required.

Essential Job Functions

15% - Utilizes engineering background and expertise to communicate quality requirements to product team members, in-house inspection personnel, and suppliers. Communicates quality issues to program and process management.

20% - Reviews engineering drawings for inspectability. Works with inspection process experts to develop special inspection techniques where necessary. Assures that fabrication and inspection requirements defined in engineering drawings/specifications are appropriate for the design and comply with customer and company quality requirements.

15% - Participates in design reviews with customers. Presents the product inspection plan describing how hardware acceptance processes will assure compliance with design, customer, and company requirements.

20% - Provides a clear and concise flow down of product definition and quality requirements to suppliers. Works closely with Supply Management and Supplier Quality to coordinate/resolve supplier issues.

15% Reviews product nonconformances. Assure adequate nonconformance description and appropriate disposition. Handles and communicates deviations/nonconformances at different levels within the organization. Interfaces with the Material Review Board (MRB) to describe impact of nonconformance (schedule, cost, performance, etc.) and explain technical justification for the hardware disposition.

10% - Drives corrective and preventative action activity both in-house and at the supplier, and provides corrective action board support to manage timely and effective problem closure and recurrence control.

5% - Prepares comprehensive analyses, procedures, reports and presentations for both internal and external customers.

Skills:
Effective verbal and written communication skills.
Strong interpersonal skills and ability to work within a close-knit team environment.
Valid driver’s license.

Education:
Bachelor’s degree in appropriate discipline and 9 years of directly related experience, or an equivalent combination of education and experience.
 
Job Number: 7880
Job Location: Canoga Park, CA
Rate: 50.00-54.00/Hr
Per Diem: Possible Split
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 09/11/2017
Last Updated: 12/12/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Specialist Engineer / NDT / 6 openings! CA

Description:
160315/7337172

Job Title: Quality Assurance Specialist Engineer
Rate 54/hr max

Number of Positions: 6

Remaining Positions: 6

Duties:
** Candidates must be U.S. Citizens **



** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Dual Citizens or candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible **





This individual will provide Quality Engineering support to the assigned product team spanning the life cycle of the program; including design, development, production, test, and supplier support. An understanding of engineering drawings, specifications, and typical aerospace product assurance processes (dimensional inspection, NDT, source/receiving inspection, etc) is required.



Essential Job Functions

15% - Utilizes engineering background and expertise to communicate quality requirements to product team members, in-house inspection personnel, and suppliers. Communicates quality issues to program and process management.


20% - Reviews engineering drawings for inspectability. Works with inspection process experts to develop special inspection techniques where necessary. Assures that fabrication and inspection requirements defined in engineering drawings/specifications are appropriate for the design and comply with customer and company quality requirements.



15% - Participates in design reviews with customers. Presents the product inspection plan describing how hardware acceptance processes will assure compliance with design, customer, and company requirements.


20% - Provides a clear and concise flow down of product definition and quality requirements to suppliers. Works closely with Supply Management and Supplier Quality to coordinate/resolve supplier issues.


15% Reviews product nonconformances. Assure adequate nonconformance description and appropriate disposition. Handles and communicates deviations/nonconformances at different levels within the organization. Interfaces with the Material Review Board (MRB) to describe impact of nonconformance (schedule, cost, performance, etc.) and explain technical justification for the hardware disposition.



10% - Drives corrective and preventative action activity both in-house and at the supplier, and provides corrective action board support to manage timely and effective problem closure and recurrence control.



5% - Prepares comprehensive analyses, procedures, reports and presentations for both internal and external customers.

Skills:
Effective verbal and written communication skills.
Strong interpersonal skills and ability to work within a close-knit team environment.
Valid driver’s license.
Education:
Bachelor’s degree in appropriate discipline and 9 years of directly related experience, or an equivalent combination of education and experience.


Skills:
Required

QUALITY ENGINEER AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 09/25/2017 Hours Per Week: 40.00
Est. End Date: 09/25/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7337172
Job Location: Canoga Park, CA
Rate: 54/hr max
Duration: 12 month contract
Input Date: 11/13/2017
Last Updated: 11/27/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer(aerospace)

Description:
Role: Quality Engineer

Location; Cincinnati, OH



Requirements:
•Bachelor’s Degree in engineering, quality, or equivalent training and experience, preferably in the aerospace industry.
•Minimum of 3 years as Quality Engineer II or equivalent experience.
•In depth knowledge of NDT processes and familiarity with the following: welding; heat treating of aerospace alloys; non-destructive testing; shot peening; coordinate measuring machines; inspection methods; and measuring and test equipment.
•Proficient in the use of personal computers, blueprint reading, geometric tolerances, and application of SPC to part characteristics.
•Good interpersonal and communication skills, problem solving skills, and understanding of aerospace requirements.
•Must attend training and earn DQR, DSQR, and/or other customer certifications as required in order to release manufactured parts for shipment.



Physical Requirements:

Normal working environment – standing, sitting, walking – typically inside a building. Occasional stooping, twisting, lifting, bending, and carrying. Minimal or no exposure to excessive noise, dirt, chemicals, extreme temperatures, or hazardous conditions. Continual use of computers
 
Job Number: 52290
Job Location: Cincinnati, OH
Input Date: 09/11/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bala
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
Reliability Engineer

Principle Duties and Responsibilities
·Perform detailed analysis and assessment of mechanical and electromechanical designs to identify and document reliability, maintainability and safety considerations.
· Develop reliability program plans, perform reliability analysis, apportion failure rates, generate reliability predictions and reports, analyze production and field data to identify reliability improvement opportunities.
·Utilize the company Failure Reporting, Analysis and Corrective Action System (FRACAS).
·Conduct and document Failure Modes Effects and Criticality Analysis (FMECA/FMEA) and Fault Tree Analysis.
·Support and/or lead Root Cause and Root Cause Failure Analysis.
·Perform systems and subsystems safety hazard analysis, assign hazard rating, develop mitigation strategies, actively track and manage hazards to acceptable risk levels.
·Perform maintainability analysis, identify preventative maintenance activities and cycle times, ensure customer maintenance requirements are met and support customer maintenance demonstrations.
·Generate proposals, RM&S estimates and support Total Cost of Ownership or Life Cycle Cost predictions.
·Participate in Integrated Product Teams for collaborative design and project execution coordination.
·Implement Reliability Growth program to include recommendations and support for Highly Accelerated Life Tests (HALT), Highly Accelerated Stress Screening (HASS), Test Analyze and Fix (TAAF), reliability risk reduction, Environmental Stress Screening (ESS), acceptance testing and qualification testing.
·Make independent judgments regarding technical issues and recommendation to improve company processes.
Required Qualifications:
· Bachelor of Science in Engineering or Engineering Technology discipline.
·8+ years experience as an RM&S engineer or equivalent role.
·Expert in performing reliability, maintainability and safety analysis for defense and commercial aerospace systems.
·Expert in utilizing 217Plus and generating MTBF, MTTR, Failure Rates and Availability predictions.
·Experienced using PTC/Relex Reliability Prediction software.
·Strong technical writing, report preparation and communication skills.

Desired Qualifications:
·Certified Reliability Professional (CRP) or Certified Reliability Engineer (CRE).
· Strong statistical analysis and pragmatic problem solving skills.
· Experience with DO178B, DO254 and 14 CFR Part 25.
· Familiar with Design For Six Sigma (DFSS) and/or Six Sigma methodologies.
 
Job Location: Davenport, IA
Rate: Open
Per Diem: Yes
Overtime: Some
Duration: 6-12
Start Date: ASAP
Input Date: 09/13/2017
Firm Name: AMERICAN CONTRACT GROUP
Attention: Derek Doucette
Address: 50 HIGH ST STE 46
City, State: NORTH ANDOVER, MA 01845
Phone: 978/984-5581
800 Phone: 877/723-9087
Fax Phone: 978/208-8246
Website: www.americancontractgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Advanced Processors - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring Senior Advanced Processors for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• The Advanced Processor shall evaluate processes and configure manufacturing systems to reduce cost, improve sustainability and develop best practices within the production process
• Create complex processes, validate customer processes, write quote letters, contact outside vendors for quotes of their equipment, provide customer and specific deliverables for ALL phases of the quoting process
• Perform all processes in process designer and train colleagues in advanced process designer
• Assist in creating workable libraries and assist in developing the process designer and estimating collaboration

Qualifications:

• Bachelor of Applied Science or graduate degree ( Engineering)
• A minimum of ten (10) years’ of related experience including at least five (5) years’ in an advance processing role and accountability
• Solid experience with expert advanced processing capabilities in all fields (BiW, TCF, Aerospace, logistics and military)
• Champion user of the software process designer

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40024
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/07/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Mechanical Designers - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring Senior Mechanical Designers for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

To develop engineered solutions using an established CAD system from concept through 3-D design and 2-D detailing of tooling for the manufacturing sector in automotive (body-in-white and powertrain), aerospace, construction and forestry industries. To coordinate design and engineering communications and closely work with proposal and estimating, project management, purchasing, manufacturing operations, quality, field service, aftermarket sales and documentation departments.

Job Duties:

• Construct and modify CAD models per customer CAD standards using one or more of the following systems: Catia, Unigrahics, FIDES, AutoCad, Inventor, and Solidworks
• Estimate design hours for tool concept to design and release for original content as well as changes
• Prepare layout and detail drawings of design as required to project timelines
• Develop creative and innovative engineered solutions that meet or exceed customer requirements
• Review and study customer specifications, engineering schematics and other data in order to determine the design procedures needed to generate and release digital and/or hardcopy printouts related to the engineering and manufacturing requirements
• Perform necessary engineering calculations and proper material selection to satisfy the required design functionality
• Coordinate any structural and/or finite element analysis that need to be performed for assessing the functionality of the tools designed
• Coordinate the development of part drawings, including CAD drawings, through other designers, internal or outsourced, to comprehensively manage the complete design of the tools that are assigned
• Meet and review design details and function with customer engineer and designer per Quality Stage Gate requirements as stipulated by customer for design reviews
• Work effectively to project budgets and timelines, with constant awareness to design within the project budget constraints
• Work closely with customer engineer and/or designer on design changes to improve manufacturability, maintainability and serviceability of equipment
• Verify the completeness and the accuracy of the CAD model and data before final release of the drawings for purchasing or fabrication and before final storage of the data for future retrieval, with significant prior expertise and experience in checking detail drawings for the manufacturing tooling industry
• Be knowledgeable of the release systems and procedures, and release all the necessary detail drawings in digital and/or hardcopy formats per established requirements of the internal and external customers (for example release to purchasing for make/buy decision, input for controls design and engineering, and documents to support field installation and service personnel, direct digital transfers to customer systems)
• Possess general awareness of Geometric Dimensioning and Tolerancing (GD&T) concepts and its application in manufacturing and assembly sectors in automotive, aerospace, construction and forestry industries
• Be knowledgeable about the FMEA, 8-D and structural analysis (FEA) performed on the tools and/or the process stations using the tool(s) assigned. Initiate ideas and coordinate efforts for continuous improvement of product/tool and process

Qualifications:

• A Bachelor of Applied Science or Mechanical Engineering degree or equivalent from a recognized University is preferred or an Associate Degree/Engineering Diploma, preferably with a specialization in design and drafting, from a recognized Community College or equivalent experience as assessed by the Hiring Manager
• Specialized training with certifications where applicable from recognized training organizations, in the use of CAD systems and software, such Catia, Unigrahics, FIDES, AutoCad, Inventor, Solidwork
• A minimum of 10 years of direct experience and demonstrated capabilities in concepting, 3-D designing and 2-d detailing by consistently using one or more of the above mentioned CAD systems for the design of manufacturing and assembly tooling, which include geo, respot, end-of-arm tooling, etc.
• Experience in one or more of the following industries is a must – automotive, aerospace, construction and forestry vehicles/equipment manufacturing industries
• In the automotive manufacturing industry, specific experience focused in any one or more of the following areas is highly recommended: body-in-white welding and assembly, closure hanging, powertrain manufacturing and assembly (including machining and assembly automation, material handling systems, component washers, leak-testers, functional testing machines), final assembly, or material handling in manufacturing plants
• Leadership abilities in coordinating design related tasks among peers, Junior Designer inside the Company or from engineering design outsource agencies and holding them accountable to deliver on time per the project timeline and ensuring quality of CAD data
• Ability to effectively prioritize and execute tasks in a high pressure environment including following on tool s during the fabrication, build installation and commissioning phases of the project
• Ability and willingness to travel to any of the customer and Company’s work locations in North America, Europe and Asia, as required by Management
• Must be willing to work extended hours, when necessary, including overtime, weekends and holidays and on night shift, as project and customer demands dictate
• Excellent interpersonal, written and verbal communication skills
• Ability to work with others, including peers and personnel in other departments
• Eligibility for clearance under the Canadian Controlled Goods and the American ITAR requirements

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39986
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Service and Repair(aerospace)

Description:
Role: Service and Repair(aerospace)

Location: salt lake city, UT

Duration:5-6 months+



**Computer Literacy is a must, assembly experience is not required as candidate can be trained on the assembly process**

Required Skills/Qualifications:
• Must show proof of Hepatitis B shots or willing to get shots (company paid)
• Ability to read and understand Device/Work instructions
• Ability to record data on documentation and in computer software
• Ability to understand verbal work instructions from Supervisor
• Ability to lift up to 25 pounds on a repeated basis
• Close vision (clear vision at 20 inches or less) / Color vision (ability to identify and distinguish colors)
• Depth perception (three-dimensional vision, ability to judge distances and spatial relationships)
• Basic knowledge of windows based computer software
• Basic math skills
• Ability to perform these operations using units of American money and weight measurement, volume, and distance
• Ability to carry out tasks through detailed written or oral instructions
• Ability to deal with problems involving a few concrete variables in standardized situations
• Able to succeed in highly regulated compliance oriented environment while still providing service excellence

Preferred Qualifications:
• IPC soldering certification preferred

Education and/or Experience:
High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.
 
Job Number: 52284
Job Location: salt lake city, UT
Overtime: yes
Duration: 5-6 months
Input Date: 09/06/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bala
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation & Software Engineer

Description:
Simulation & Software Engineer
Savannah, GA
Long Term Contract
$58.00-63.00/Hr

Unique Skills:
1. Matlab/Simulink experience modeling real time aircraft systems
2. Aerospace background with avionics lab testing experience
3. Ability to understand aircraft electrical wiring diagrams as it relates to HIL simulation
4. Experience with high level programming or scripting language such as C/C++, Python
5. Knowledge of data protocols used in aerospace
6. Experience modeling aircraft systems in real time on industry standard simulation platforms (eg NI, Speedgoat, Dspace,ADI)
7. Flight and/or aircraft system lab HIL simulation experience
8. Ability to work independently and self-govern priorities in accordance with lab customer needs

Job Description
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7079
Job Location: Savannah, GA
Rate: 58.00-63.00/Hr
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/22/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer Sr with active secret / Ada NY

Description:
160120/1522

Work Location OWEGO, NY
Work Week 9/80-A
Priority Medium
Needed Date 09/11/2017
End Date 03/09/2018
Number of Resources 2
Security Clearance Active Secret to start



Title: Software Engineer Sr

Description
Work in military avionics/aerospace systems/subsystems integration applications. Ada programing language is strongly desired. Additional knowledge of C/C++/C# Language is acceptable. Ada/Ada95, DoD standards and development, familiar with fixed wing/helo systems, embedded applications/dev, Wind River VxWorks RTOS and interface layers, Visual Studio, .net framework, Team Foundation Server. Additional experience with low level graphics and intel/Linux OpenGL experience is desirable. The successful candidate must be flexible, motivated, details-focused, team-oriented and demonstrate a strong work ethic along with the ability to multi-task. Designs, develops, operates, maintains, and documents software and firmware components and computing systems software to be applied to engineering, scientific, and manufacturing requirements. Applies the required standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and environments as aerospace /avionics applications, mission support applications, laboratory simulation/emulation systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, as well as other technical, management and support personnel.
Attachments: Owego Software.docx
Skill/Experience/Education
Mandatory:

Secret clearance. Ada/Ada95.


Desired:

Ada/Ada95, DoD standards and development, familiar with fixed wing/helo systems, embedded applications/dev, Wind River VxWorks RTOS and interface layers, Visual Studio, .net framework, Team Foundation Server.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Ada/Ada 95 4-5 Years Yes


Interview Required Yes
Min Pay Rate 45.00 USD
Max Pay Rate 85.00 USD

Shift 1st Shift
OT Allowed Yes (#hours allowed: 5, Pre-Approval Reqd.:Yes)
Travel No
Exempt
 
Job Number: JE-1522
Job Location: Owego, NY
Rate: 45-85 DOE
Duration: 6 month contract
Input Date: 08/14/2017
Last Updated: 09/25/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret / Matlab Simulink CA

Description:
160101
Requirement #AERO-REQ-0625
Work Location Palmdale, CA
Work WeeK 9/80-A
Priority High
Needed Date 08/29/2017
End Date 05/29/2018
Number of Resources 1
Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)


Title: Software Engineer

Description
Develop, analyze, integrate, and test flight control laws and embedded software for the Advanced Development Programs (ADP, Skunk Works) Flight Control and Vehicle Management Systems Integration team. Contribute to software requirements, design, code, reviews, and test of operational flight programs. Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment. Selected applicant will be subjected to government security investigation and must meet eligibility requirements for access to classified information and special program clearances
Candidate must possess an active SECRET clearance.

Skill/Experience/Education
Mandatory:

Candidate must have Flight Control system experience and Experience with MATLAB, OR Simulink
Candidate must possess an active SECRET clearance.
Desired:

Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0625
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 9 month contract
Input Date: 04/18/2018
Last Updated: 04/19/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer – Level 3

Description:
Location: Denver, CO
Rate: DOE
Duration: 1 Year

**MUST be a U.S. Citizen**

Job Description:
- Position is for a HCS FSW Contractor
- Contract labor to support our client, an aerospace company, with INCA and EDS in support of the Commercial Crew Program (CCP) and the Intermediate Cryogenic Propulsive Stage (ICPS) programs.
- Required to perform total embedded software product lifecycle development.
- The software engineer is required to execute requirements analysis, software design and implementation, and perform verification and validation tasks.
- Subcontractor will need to have an aerospace engineering background to be able to understand the physics of the systems (tank pressures, engines, actuators, avionics) being coded and to do the unit test review required to verify that the coding requirements have been satisfied in each test.
- Experience with the real-time embedded systems, Ada programming language, Linux operating system, and the Eclipse development environment is desired.
- This position will perform EDS and ICPS FSW development work scope which is short term in nature, with the primary effort finishing within one year.
-Bachelor's degree or higher required.
 
Job Number: 7664
Job Location: Denver, CO
Rate: DOE
Per Diem: Split Possible
Overtime: No
Duration: 1 yr
Input Date: 07/27/2017
Last Updated: 10/06/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Avionic-Mechanical Design Engineer

Description:
TOOLS
Inventor (3D Modeling)

INTAKE NOTES
Looking for Avio Mechanical Design Engineer with heavy mechanical experience and some electrical exposure. Familiar with 3D modeling using Inventor or Solidworks, Catia is ok (not preferred). Must have aircraft hardware experience such as; honeycomb panels, potted inserts (screw into panel), sheet metal design, understanding of aircraft separation design/requirements. We basically need a CAD jockey for 6 months.


JOB DESCRIPTION
Responsible for the design and oversight of the wire installation, operation and maintenance of electrical components, equipment and systems.
· Develops and maintains aircraft electrical equipment installations, concepts and designs.
· Interfaces with engineering leads to resolve design issues, captures changes and closes out designs to meet schedule and budget targets.
· Supports installation of electrical systems via liaison with modification facility, identifies root cause issues, captures redline updates, resolves design issues and updates drawings to meet schedule.
· Prepares and analyzes electrical system layouts and performs design reviews.
· Documents processes, specifications and procedures that support the design and manufacture of electrical commodities.
· Designs the installation of electrical components, equipment and systems with maintenance and operational functionality in mind.
· Utilizes 3D CAD (Inventor) installations of electrical components to meet requirements.
· Bachelor's degree (B.S.) in Aerospace or Electrical engineering desired, minimum of five years relevant aerospace experience or equivalent combination of education and experience. Aircraft interior and/or VIP retro-fit experience preferred.
· Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

IN-DEPTH KNOWLEDGE, SKILLS, AND ABILITIES FOR THIS ROLE INCLUDE:
· Proven proficiency in 3D Inventor for design and development of aircraft wire routing drawings for shipside and monuments to latest FAA design standards to meet customer requirements.
· Understands wire schematics, system block diagrams and topologies.
· Extensive technical knowledge of Boeing aircraft for VIP and/or commercial models.
· Strong working knowledge of My Boeing Fleet for OEM data sets.
· Thorough knowledge of equipment installation.
· Understanding of the certification and electrical design process.
· Ability to trouble-shoot electrical systems.
· Competent user of CAD and data management systems.
· Must be able to provide layouts and program design reviews.
 
Job Number: 17-744
Job Location: Northwest
Rate: Open
Per Diem: SPlit
Overtime: Possible
Duration: 6 mths
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Avionics Systems Design Engineer

Description:
TOOLS
Visual Engineer (V.E.)

INTAKE NOTES
We need an electrical systems engineer with VE background to hit the ground running. Engineer will design wire diagrams/schematics for IFE, power supply, and lighting for aircraft interiors retrofit, not OEM. I am not looking for an OEM person.

JOB DESCRIPTION
Creates advanced designs of avionics to include cabin system components, in-flight entertainment, communication systems, LED cabin lighting, AC/DC power systems and products to meet customer criteria, design quality standards, FAA requirements, budget and project schedules.

ESSENTIAL DUTIES AND RESPONSIBILITIES
• Defines avionics and electrical system architecture requirements, definition, system and sub-system aircraft integration for VIP/VVIP aircraft platforms.
• Develops aircraft integration design solutions utilizing engineering drafting tools for avionics and electrical aircraft interiors, system components and support aircraft installations and testing.
• Interfaces with engineering leads to resolve design issues, captures changes and closes out designs to meet schedule and budget targets.
• Supports installation of systems via liaison with modification facility, identifies root cause issues, captures redline updates, resolves design issues and updates drawings to meet schedule.
• Develops verification and test procedures, ground and flight test procedures and interfaces with FAA designees to incorporate compliance with the latest FAA design guidance requirements.
• Works directly with equipment vendors to capture requirements and ensures operational interface between systems and sub-systems is maintained and validated.
• Maintains close coordination with project engineers to comply with schedule and cost requirements of programs.
• Participates in the project bid process to capture engineering and design requirements for bid estimates and firm price quotes to customers.
• Interfaces with customers (internal and external) during entire project to ensure designs meet customer criteria.
• Reviews completed drawing packages from peers and approves them for release.
• Prepares design check lists as needed.
• Maintains regular attendance including being at work, being on time to work and working full shifts.
• Other duties as assigned.

Bachelor's degree (B.S.) in aerospace or electrical engineering desired; minimum of eight years relevant aerospace experience; or equivalent combination of education and experience. Aircraft interior and/or VIP retro-fit experience preferred.

Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.
REQUIRED KNOWLEDGE, SKILLS & ABILITIES
• Must have Visual Engineering (VE) CAD design experience
• Extensive technical knowledge of Boeing aircraft for VIP and/or commercial models.
• Strong working knowledge of My Boeing Fleet for OEM data sets.
• Thorough knowledge of power distribution.
• Thorough understanding of the certification and electrical design process.
• Must be able to provide complex lay-outs and program design studies.
• Ability to work and make decisions independently with limited supervision.
• Ability to successfully interface with customers on projects.
• Competent use of CAD and data management systems.
• Ability to understand and derive multiple customer standard electrical system requirements.
• Ability to work well independently and cross-functionally across multiple organizations.
• Strong communication, time-management, and problem-solving skills.
 
Job Number: 17-745
Job Location: Northwest
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Design Engineer VI

Description:
Position Summary: Directly support the F/A-18 & EA-18G Fleet Support Team (FST) Structures Group at Fleet Readiness Center West (FRCW), NAS Lemoore, located at Lemoore, CA. This position is a Structures Engineering Production liaison support on-site at NAS Lemoore.

Essential Duties and Responsibilities:
Provide structural engineering liaison support to all F/A-18 production efforts, fleet repairs and sustainment activities. These include providing complete evaluation of aircraft structural damage (due to cracks, corrosion, thermal damage, etc.), provide engineering repair designs and prepare detailed repair instructions consistent with the engineering strength requirements of the F/A-18 program.
Provide final approval and recommendation on parts substitution, materials substitution, and repair processes including deviations from standard repair requirements and engineering repair dispositions.
Engineering liaison support to include providing technical assistance to production and shop personnel on various courses of action regarding structural components and aircraft repair dispositions.
Serve as the on-site technical consultant representing the F/A-18 FST regarding aircraft repairs, maintenance inspections and repair modifications. Serve as spokesman and representative advisor on specific engineering issues. Interface with the F/A-18 FST engineering, other field teams and Navy Squadrons.

Qualifications & Skills Requirements:
At least ten (10) years of experience in a relevant engineering/science field.
BS or BA degree in a relevant engineering/science field. Proficient in Microsoft Office including Word, Excel, and Access
Current Secret Clearance is required.

Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to stand and/or walk and occasionally lift and/or move up to 10 pounds. Will need to be able to move throughout the office and talk/hear or otherwise communicate with other employees and management. Work will be performed in an office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.
LMI Aerospace Engineering Services is an E-Verify EOE/Minorities/Females/Disability/Vets employer

Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
 

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Technical Engineer VI

Description:
Essential Duties and Responsibilities:
Perform various tasks related to the development, operation, evaluation, and improvement of weapon systems supportability and/or maintainability programs for F/A-18 and EA-18G aircraft.
Work on logistics and maintainability programs and with logistics and maintenance control organizations on issues such as: technical evaluation and identification of weapons systems logistics requirements and resources; development of logistics support and maintainability programs or plans; systems acquisition requirements analysis; life cycle cost analysis and control; weapons systems standardization and compatibility.
Assist in the development, improvement, sustainment, and implementation of requirements to the IMC/P Specification, Age Exploration Specification/Bulletins (AEB) efforts, Organizational Level scheduled maintenance publications (MRC), and data trending.

Qualifications & Skills Requirements:
5 years of relevant experience.
BS or BA degree. ALLOWABLE SUBSTITUTION: An additional five (5) years of acquisition or operational logistics management experience may be substituted for a BS or BA degree.
Proficient in Microsoft Office including Word, Excel, and Access
Active (current) Secret Clearance is required.

Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to stand and/or walk and occasionally lift and/or move up to 10 pounds. Will need to be able to move throughout the office and talk/hear or otherwise communicate with other employees and management. Work will be performed in an office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.

LMI Aerospace Engineering Services is an E-Verify EOE/Minorities/Females/Disability/Vets employer

Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
 

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Technical Engineer VI

Description:
Essential Duties and Responsibilities:
Reliability Centered Maintenance Analyst (RCM), support FRCSW, NAS North Island, San Diego, CA.
Perform analyses, effectively using NAVAIR software to document (RCM) analyses, drafting reports, papers, and presentations on results of RCM analyses.
Candidate will also be performing basic statistical and cost analyses, and participate in RCM system expert team meetings and interviews.
Performs other duties as required.

Qualifications & Skills Requirements:
5 years of relevant experience
BS or a BA degree. ALLOWABLE SUBSTITUTION: An additional five (5) years of acquisition or operational logistics management experience may be substituted for a BS or BA degree.
Active (current) Secret Clearance is required.
Experience in aviation maintenance with exposure to aircraft, aircraft systems, ground support equipment, trend analysis or reliability analysis is highly desired.
Candidate should have a working knowledge of MRC decks, aircraft maintenance plans, aircraft maintenance and systems.
Familiarity with IRCMS reliability software, and any/all phases of Design Interface Maintenance Planning is highly desired.
Reliability Centered Maintenance (RCM) training is considered a definite plus, but is not required.
Candidate should be able to demonstrate the ability to collect, sort and analyze various qualitative and quantitative data.
Candidate should have a working knowledge of Naval Aviation Maintenance Planning, PMIC’s, MRC decks, CNAF 4790.2, aircraft maintenance plans, aircraft maintenance and systems.
The candidate will be expected to be proficient with the Microsoft Office suite of software tools (Outlook, Word, Excel, and PowerPoint)

Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to stand and/or walk and occasionally lift and/or move up to 10 pounds. Will need to be able to move throughout the office and talk/hear or otherwise communicate with other employees and management. Work will be performed in an office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.

LMI Aerospace Engineering Services is an E-Verify EOE/Minorities/Females/Disability/Vets employer

Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
 

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Bachelor's Degree (B.S) in Mechanical, Aerospace, or Civil Engineering

Position requires in-depth knowledge of Engineering Mechanics and Strength of Materials.
•Good leadership and communication skills.
•Minimum of 5 years in cabin or cargo compartment stress analysis.
•Experience in static (FE and free-body), fatigue and transient analysis, Nastran, Patran, MathCad.
•Familiar with FAA/EASA Aircraft regulatory requirements.
•Able to utilize Microsoft Excel, Word, PowerPoint and Project PC tools
review all current openings at www.hi-tecsolutions.com/jobs
 
Job Number: 632066
Job Location: Mobile, AL
Rate: 60-70
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: asap
Input Date: 09/19/2017
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: 2501 E PIEDMONT RD STE 103
City, State: MARIETTA, GA 30062-7753
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

4 Aircraft Stress Engineers with Composites

Description:
4 Aircraft Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $75-85/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 10/03/2018
Last Updated: 10/15/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer

Description:
Location: Canoga Park, CA
Rate: $60.00 - $75.00/HR
Duration: 6 month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
-Must have recent experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis).
-Aerospace or Defense related experience preferred over airframe or aviation experience.
-Recent college grads are okay with at least some ANSYS experience.
-Prefer candidates with stable work histories (are not “job hoppers” and do not have big resume gaps).
-Master’s degree strongly preferred.


The selected candidate will:
Assist other analysts and designers engaged with development and production of new and existing liquid rocket engines, propulsion system components and secondary structure.
Perform structural analyses utilizing class hand-calculation methods and finite element models.
Construct and solve static and dynamic finite element models with ANSYS
Participate in dynamic test planning and execution.
Correlate structural models to test results.
Interpret analytical results, assess design margins and prepare technical reports.


Skills:
-Demonstrated experience performing linear, non-linear and structural dynamic analyses supporting design, development and production qualification of new or updated products is required.
-Proficiency using finite element analysis tools such as ANSYS is required.
-Knowledge and experience with aerospace product development efforts is desired.
-Must have the ability to read and interpret engineering drawings.
-Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.


Education:
-BS in Mechanical Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis or an equivalent combination of education and experience.
-Master’s degree is strongly preferred.
 
Job Number: 7877
Job Location: Canoga Park, CA
Rate: $60.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 04/24/2018
Last Updated: 05/23/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer / no clearance / candidates with recent ANSYS Structural Analysis experience URGENT CA

Description:
160343/7441118

Job Title: Structural Analysis Engineer

Additional Information: Candidates needed! Manager is interviewing. Must have recent Aerospace structural analysis experience using ANSYS. See job description for other requirements.

-Must have recent experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis).

-Aerospace or Defense related experience preferred over airframe or aviation experience.
-Recent college grads are okay with at least some ANSYS experience.
-Prefer candidates with stable work histories (are not “job hoppers” and do not have big resume gaps).
-Master’s degree strongly preferred.



Number of Positions: 4

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



-Must have experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis).



-Prefer candidates with stable work histories (are not “job hoppers”).



-Master’s degree strongly preferred.



The selected candidate will:

Assist other analysts and designers engaged with development and production of new and existing liquid rocket engines, propulsion system components and secondary structure.
Perform structural analyses utilizing class hand-calculation methods and finite element models.
Construct and solve static and dynamic finite element models with ANSYS
Participate in dynamic test planning and execution.
Correlate structural models to test results.
Interpret analytical results, assess design margins and prepare technical reports.



Skills:
-Demonstrated experience performing linear, non-linear and structural dynamic analyses supporting design, development and production qualification of new or updated products is required.

-Proficiency using finite element analysis tools such as ANSYS is required.

-Knowledge and experience with aerospace product development efforts is desired.

-Must have the ability to read and interpret engineering drawings.

-Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.



Education:
-BS in Mechanical Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis or an equivalent combination of education and experience.

-Master’s degree is strongly preferred.

Skills:
Required

ANSYS AEROSPACE STRUCTURAL ANALYSIS FINITE ELEMENT ANALYSIS

State/Province: California
City/Town: Canoga Park

Start Date: 10/02/2017 Hours Per Week: 40.00
Est. End Date: 04/01/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7441118
Job Location: Canoga Park, CA
Rate: 65-75/hr max
Duration: 6 month contract
Input Date: 05/24/2018
Last Updated: 05/29/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer with active secret / ANSYS required FL URGENT URGENT

Description:
Job Title: Structural Engineer
Job Number: 159123/6808601
Location: Jupiter, FL
Compensation: 75/hr
Assignment Length: 12 month contract
Active secret clearance or active within the last two years is REQUIRED
Candidates must be experienced with Ansys as their primary FEA tool.

Candidates needed! Please note that this is not a design role. Candidates should have experience focusing on structural analysis and ANSYS rather than design. Thanks!



Description:

** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years. They must be able to obtain and maintain a U.S. Security Clearance at the appropriate level **
. Active secret clearance or active within the last two years is REQUIRED

** Candidates must be U.S. Citizens **


** Candidates must be able to satisfy federal government requirements for access to government information. Permanent residents are NOT eligible for this role. Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT eligible **







Assist other engineers and designers engaged with the development and production of new and existing liquid rocket engine and hypersonic propulsion system components and secondary structure.
Perform structural analyses utilizing classic hand-calculation methods and finite element models.
Construct and solve static and dynamic finite element models with ANSYS.
Independently exercise expertise to provide guidance to program/product team and other structural analysis team members.
Interpret analytical results, assess design margins and prepare technical reports.
Skills:
Required:

This position requires a BS in Mechanical Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis. Demonstrated experience performing linear and non-linear analyses supporting design, development and production qualification of new or updated products is required.
Proficiency using finite element analysis tools such as ANSYS is required.
Must have the ability to read and interpret engineering drawings.
Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.


Desired:

10 years combined education/experience and experience with aerospace product development efforts is desired.
Experience interfacing with structural dynamics and using system model results is beneficial.



Keywords:

Structures, Structural Analysis, HCF, LCF, fatigue, fracture mechanics, ANSYS

Education:
This position requires a BS in Mechanical Engineering or Engineering Mechanics
 
Job Number: MB-6808601
Job Location: Jupiter, FL
Rate: 75/hr max
Duration: 12 month contract
Input Date: 10/04/2017
Last Updated: 10/11/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required. 
  • Composite experience 

 
Job Number: 1610051183
Job Location: Palmdale, CA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLaAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US.
 Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051186
Job Location: CO Springs, CO
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLpAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051181
Job Location: Grand Prairie, TX
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLQAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051185
Job Location: Denver, CO
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLkAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051178
Job Location: Huntsville, AL
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLBAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051189
Job Location: Marietta, GA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydM4AAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051182
Job Location: El Segundo, CA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLVAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051187
Job Location: Greenville, TX
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLuAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051188
Job Location: Warner Robins, GA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLzAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051180
Job Location: Fort Worth, TX
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLLAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051184
Job Location: San Diego, CA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLfAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051152
Job Location: Houston, TX
Duration: 12 months
Input Date: 06/09/2016
Last Updated: 10/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydHEAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610050801
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 06/01/2016
Last Updated: 10/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ybKsAAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer (secret clearance)

Description:
Structural Design Engineer

Secret Clearance Required: active with 5 year refresh/update
Location: St Louis, MO
Duration: long term contract
Rate; up to $75/hr
Multiple openings


Job Purpose
Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components. Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers).
• Develop design data for aircraft structural components, systems components, assemblies and installations.
• Complete assignments within scheduled milestones.
• Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
• Mentor associate structural engineers.
• Actively works to improve daily processes.
• Maintains a current knowledge of developments in aircraft structures.
• Participates in projects to improve productivity and financial performance.
• Perform other job duties as assigned.

Qualifications
• Bachelor’s Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience.
• Minimum 8 years engineering experience.
• Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000).
• Experience with Team Center & Enovia is a plus.
• Attention to detail of completed designs is critical. Ability to work with cross functional teams required.
• Proficient at producing high quality designs within schedule and budget.
• Must be able to work in team environment.
• Must be able to work overtime and weekends as required.
Required:
• Must have active secret clearance or active within the last 2 years
• Composite experience
The Structures Company LLC is an AA/EOE.
 
Job Location: St. Louis, MO
Rate: up to $75/hr
Per Diem: yes
Overtime: possible
Duration: 12+ month
Start Date: asap
Input Date: 09/13/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Designers - UGNX & Teamcenter

Description:
Structural Designers - many needed
UGNX & Teamcenter
Sheetmetal/Composites
Aerospace Background
10+ Years exp. (Degreed or Non-Degreed)

Please email resumes to: mmccarthy@pdstech.com
 
Job Number: Bo-AL-Structures
Job Location: Huntsville, AL
Rate: $54.00-$56.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: 10/2/2017
Input Date: 09/22/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer

Description:
Structural Engineer

Location: Jupiter, FL
Rate: $70.00 - $75.00/HR
1 year contract


** Candidates must either have an Active Secret clearance or have had a Secret clearance in the last two years.**

** Candidates must be U.S. Citizens **
** Candidates must be able to satisfy federal government requirements for access to government information. Permanent residents are NOT eligible for this role. Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT eligible **

** Candidates must have experience with ANSYS **

- Assist other engineers and designers engaged with the development and production of new and existing liquid rocket engine and hypersonic propulsion system components and secondary structure.
- Perform structural analyses utilizing classic hand-calculation methods and finite element models.
- Construct and solve static and dynamic finite element models with ANSYS.
- Independently exercise expertise to provide guidance to program/product team and other structural analysis team members.
- Interpret analytical results, assess design margins and prepare technical reports.

Skills:
Required:
- This position requires a BS in Mechanical Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis.
- Demonstrated experience performing linear and non-linear analyses supporting design, development and production qualification of new or updated products is required.
- Proficiency using finite element analysis tools such as ANSYS is required.
- Must have the ability to read and interpret engineering drawings.
- Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.

Desired:
- 10 years combined education/experience and experience with aerospace product development efforts is desired.
- Experience interfacing with structural dynamics and using system model results is beneficial.
- Experience with static and rotating (turbines, pumps etc) structures is a plus.

Keywords:
- Structures, Structural Analysis, HCF, LCF, fatigue, fracture mechanics, ANSYS

Education:
- This position requires a BS in Mechanical Engineering or Engineering Mechanics.
 
Job Number: 7199
Job Location: Jupiter, FL
Rate: $70.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 06/12/2017
Last Updated: 10/09/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structure MRB Engineer

Description:
Structures MRB Engineer
Gulfstream
Savannah, GA
Rate: $62.00-$68.00/HR
Long Term contract

Unique Skills:
- Bachelors degree in aerospace or mechanical engineering
- Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer
- Experience should include creation of engineering dispositions for nonconformance’s for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, empennage).
– Experience should be in a Production and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as Catia V5, Smarteam, Word, Excel)

Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7219
Job Location: Savannah, GA
Rate: $62-$68
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/03/2017
Last Updated: 10/06/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer/Flight Test

Description:
Note: This is a Weekend shift

Unique Skills:
- Bachelors degree in aerospace or mechanical engineering.
- Minimum 10 yrs dedicated structures MRB Engineering experience at a recognized airframe manufacturer.
- Experience should include creation of engineering dispositions for nonconformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, empennage).
- Experience should be in an aircraft Production, Flight Test and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in schedule driven environment.
- Strong written/verbal communication and interpersonal skills. - Must be computer literate (such as Catia V5, Smarteam, Solumina, Word, Excel).
 
Job Number: 24-186
Job Location: Savannah, GA
Rate: $62.00 to $68.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 06/12/2017
Last Updated: 09/01/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sustaining Design Engineer

Description:
Skills / Experience

• BSME or related experience
• Must be able to present technical information and conduct equipment maintenance
• Must have Analysis, Design Skills, Stress Analysis, Technical Writing and Strong GD&T skills
• Proficiency in MSOffice
• Proficiency in Computer Aided Design - Pro-E / Creo (Preferred) or CATIA V5 – 2000 hrs minimum
• Personal integrity willing to make decisions and stand by that decision
• Technical skills to research and write technical reports
• Evaluates and can read and interpret mechanical blue prints applying geometric tolerances
• Thorough understanding of how to apply strength of materials, static and dynamics relating to gearboxes and actuators
• Understands how to conduct tolerance study on mechanical actuators and gearboxes
• Self-starter with mechanical skills relating to gear driven equipment
• 5 years’ experience in MRB (Material Review Board) dispositions in the Aerospace industry
• Knowledge of aerospace specifications such as MIL standards, AMS, NAS, NASM and how and where to apply
• Understands Gear terminology AGMA, ANSI and other related gear and spline standards and knowledge

Benefits:
Relocation Bonus
Immediate Health Benefits
401k
Tuition Reimbursement
Stock Purchase
 
Job Location: Park City, UT
Input Date: 10/03/2017
Firm Name: APA SERVICES
Attention: Kami M Muehlberger
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Engineer NY

Description:
Request number: 4917
Date created: 08/28/2017
Job title: System Engineer
Number of openings: 3
Job type: Engineering/IT/Professional
Position location: East Aurora - NY
Employment type: Contract
OT exempt: No


Shift: 1st
Education Requirement: MS/MA

Additional Shift Details:
Driving on company time?: No

Maximum Hourly Pay Rate: 56
Start Date: 09/05/2017
Tentative End Date: 08/31/2018

Job Description

Function: 1. SUMMARY or MAJOR FUNCTION OF THE JOB
Describe the primary purpose of the job (i.e., why does the job exist?) in 1 – 3 sentences.
The System Design Engineer participates in defining the overall technical solution by interfacing directly with project management and design engineers with the goal of providing system level architectures and trade spaces necessary to support the end-users technical, financial and schedule needs. Primary activities include creation of system architecture, performance prediction, system sizing analysis, creating technical requirements baselines and Verification and Validation planning.
2. DIMENSIONS THAT SHOW THE RELATIVE SIZE AND SCOPE OF THE JOB WITHIN MOOG
Specify any of the following significant quantifiable elements of the business on which this job exercises control or significant influence.
Exercises Significant, but not Controlling, Influence:
Personnel: Total of 3 personnel
Annual Sales to External Customers: US$0 to $1,000,000 (Assigned Project Value)
3. PRINCIPAL ACCOUNTABILITIES or KEY RESULTS OF THE JOB
In the context of Item 1, list 5-8 major outcomes that this job is expected to deliver through time.
System Design
1 Create detailed product sizing and performance prediction analysis to support requirements generation for new products through the use of models, simulation and mathematical analysis.
2 Support the development of system level solution architecture with the assistance of senior level design and system engineers.
3 Contribute to product development by creating and executing detailed Verification and Validation plans and procedures for development and qualification testing of components and subsystems. This to include definition of required test equipment.
4 Lead the development of component level requirements that are fully traceable to system level requirements. Write specifications to capture these requirements.
5 Participate in the integration and test of components and subsystems.
6 Create concise reports and proposal write-ups that describe the design decisions and analysis results.
Business Development
1 Be a key contributor to the preparation of successful proposals. Contributions to include verification and validation approaches, component level design requirements, requirements compliance assessment, cost estimates and technical write-ups.
Project Management
1 Manage work packages within the established budget and schedule.
Engineering Leadership
1 Operate as a contributing member of in a team of creative, independent individuals.
2 Represent Moog in a manner consistent with its strong technical reputation.

. SPECIAL CIRCUMSTANCES or UNUSUAL CHALLENGES
What conditions (if any) create unusual difficulty or signify importance for the outcomes that are expected from this job?
• Required to coordinate / gather / facilitate design requirements generated across other design functions such as Electrical Design, Mechanical Design, Software Design and Project / Product Engineering.
• Significant support of STE design engineer to ensure proper verification and validation approach is utilized.
• Some travel is required. This is estimated to be 8 trips per year to visit customers, vendors or other Moog s