Job Search Results

537 listings were found that matched your search words: Keywords: Civil OR Industrial ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/07/23 Monday 02:50AM Pacific Time by ContractJobHunter. )

Listings 1 - 537

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2239 - CABINET DESIGNER - cv. word doc only

Description:
Act as a specialist in a specific system/monument.

Define technical specifications, mechanical/electrical interfaces, design, integrate, certify, test and troubleshoot the above described systems.

Organize and attend design reviews taking into consideration industry regulations, Client Design Practices and requirements.

Be in direct contact with suppliers and responsible for the delivery of quality engineering documentation that meets Client Standards.

Research, design and evaluate new technical concepts or emerging technologies. (Trade Shows, Air Shows, technical exhibitions, etc).

Procure parts and supply instructions drawings to employees to build mock-ups/prototype.

Provide definition engineering in relation with new designs.

Support the creation of Interface Control Drawings (ICD).

Report status, identify and mitigate roadblocks.

Point of contact on a technical level for designers.

Accountable for engineering deliverables and milestones for a group of monuments.

Bachelor's degree in Mechanical Engineering with 5 to 8 year experience.

Knowledgeable in 3D design with CATIA V5.

Organized and project oriented.

Must be bilingual and have good communication skills including good English and French writing and verbal skills.

Are a team player, working in a multidisciplinary team.

Customer-oriented with innovative problem solving skills and you are organized.

Autonomous, flexible and oriented toward result via your project management skill.

Experience and have lead a small group of designers or equivalent.

Have design experience in cabinet assembly design and/or cabinet installation.
 
Job Number: 2239
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 07/27/2017
Last Updated: 10/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2243 - PNEUMATICS SPECIALIST - cv. word doc only

Description:
Influence the definition of New Aircraft Development Projects within Product Development Engineering as well as supporting Sustaining Programs.

Provide Technical expertise to the Engineering teams, including Strategic Technology and Advanced Design.

Provide direction about Industry trends and identify company needs within the discipline.

Lead or support the Pneumatics Knowledge domain roll-out and knowledge capture & sharing.

Identify, develop and execute development opportunities for discipline members .

Lead or support Systems integration aspects in product development.

Have a Bachelor degree in Mechanical/Aerospace engineering.

Have more than 15 years of engineering experience in the field of Aerospace Pneumatic Systems.

Demonstrate good working knowledge of FAA, EASA, TCCA certification requirements (regulatory Authority delegation is an asset).

Are recognized within the industry for your expertise in Pneumatics.

Have proven leadership skills, work collaboratively in a team environment and possess excellent interpersonal and problem solving skills.

Possess good written and oral communication skills in English. (Knowledge of French is an asset).

Are available to travel on short term assignments as required.

Are proficient with most-used office programs, e.g. MS Word, Excel and Powerpoint.
 
Job Number: 2243
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 07/27/2017
Last Updated: 10/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2254- RM & SAFETY ENGINEER - cv. word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Client aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers.

Responsible for reviewing Partner's/Supplier's reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Will be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare & present risk assessments for continued airworthiness queries.

Bachelor's degree in engineering, with at least fifteen (15) years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.)
 
Job Number: 2254
Job Location: Toronto, Canada
Rate: 63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 08/18/2017
Last Updated: 11/22/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2260 - SR. ELECTRONIC EQUIPMENT DESIGN ASSURANCE - cv - word doc please

Description:
Ensure, by design and documentation reviews and process audits, that suppliers of electronic equipment follow established industry and regulatory guidelines, and sound engineering practices, in developing airborne embedded software and airborne electronic hardware (AEH), such that their products are safe and certifiable.

Liaise with Transport Canada Civil Aviation (TCCA) and produce the necessary compliance data, in order to confirm that suppliers have satisfied all certification authority requirements for software and AEH.

Review safety analyses, attend design reviews, review supplier documentation, and conduct audits on suppliers' software and AEH development products & processes. Where necessary, you will advise suppliers on action required to make their processes and products safe and certifiable, and will ensure that corrective action is carried out.

Technically lead specifically assigned projects and guide more junior group members in achieving their goals.

Keep abreast of the rapidly changing technology and processes, in order to develop and maintain best product development practices' and processes' requirements for the EEDA discipline.


Minimum, Bachelor's degree in Engineering with a specialization in Software, or a degree in Software Engineering or Computer Science.

Minimum, 11 years experience in the development or verification of real-time airborne embedded software applications in a variety of aircraft systems (using RTCA/DO-178B or equivalent standard).

Have experience in the certification, development or testing of airborne electronic hardware (AEH) according to structured development processes (RTCA/DO-254 or equivalent standard).

For both Software and AEH aspects, you are familiar with industry-recognized Software/Firmware Engineering practices, object oriented design, system safety analyses, ARP4754A and ARP4761, DO-178B, or DO-254.

Have experience of software or firmware requirement and design analysis, of writing and of acting as a peer reviewer of life cycle plans, requirements, designs, code, test cases and procedures.

Able to read and critique high-order software coding languages (procedural & object-oriented) or HDL code, as part of the design review activities.

Have working experience in software quality assurance and software configuration management, or experience with certification authorities%u2019 liaison is an asset.

Have good oral and writing skills in the English language.

Must possess the ability to work with minimum supervision, be a team player, be able to work on various projects simultaneously, and have project organization skills.

Take initiative, strong sense of responsibility and good engineering judgment.

Must be available to travel occasionally at suppliers' sites for dedicated process audits.
 
Job Number: 2260
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/24/2017
Last Updated: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2266 - AVIONICS SPECIALIST - cv. word doc only please

Description:
Review Systems architecture design to meet Aircraft Design Requirements & Objectives.

Participate in validation and lead verification activities of assigned system requirements.

Manage, review and approve where appropriate, the deliverables of the assigned system.

Plan short to medium term activities required to support development and certification of assigned system.

Chair weekly integrated product development team with cross-functional engineering discipline.

Keep accurate detail records and artifacts.

Write issue papers, advisory circular compliance matrices and certification plan.

Reviews and sign certification design compliance reports.

Reviews and sign electrical system schematics.

Support the flight test program; including witnessing of tests as required.

Bachelor's Degree in a relevant engineering discipline.

Have at least 15 years relevant experience with the design, development, integration and certification of avionics systems; previous experience with Flight Management System, network security, Air Data, Communication / Navigation would be an asset.

Familiarity and understand of pertinent TC, FAA and EASA rules and requirements.

Ability to work well in a team environment.

Available to to travel.

Must have a good knowledge of RTCA documents DO-178 and DO-160.

Must be familiar with part FAR25 / 525 certification process and with the ARP4754 standard.

Must have an experience with civil aircraft and airworthiness authorities (asset).

Must have strong communication skills (written and spoken).

Must have excellent troubleshooting skills.

Workday expectations: Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc).

Mobility: Occasional travel between plants. Must be able to travel to the US and may be required to travel to other plants on occasion.
 
Job Number: 2266
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 08/31/2017
Last Updated: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2269 - PROGRAM ANALYST - CHANGE MGMT - cv word doc only

Description:
Coordinate the teams and suppliers; remove roadblocks in order to ensure that aircraft changes are moving into the change management process rapidly and efficiently. Gather all necessary information required to implement the changes on the aircrafts (Flight test vehicles and production aircrafts) during the assembly process in Toronto et Montreal.

Participation in reviews including but not exclusive to Technical Interchange Meetings, Change Control Boards, Methods Configuration Groups and Configuration Management of product conformity to understand the end to end impact of the modifications.

Support or coordinate Engineering and special change management meetings with Suppliers and follow-up on actions as required.

Attend harmonization/Implementation planning meeting, follow-up on actions and work with natural team to ensure compliance with Program schedule.

Support, with all concerned stakeholders, the production final line for any change management related items to ensure seamless transfer of information.

Experience in documenting and tracking changes from all sources from initiation to complete implementation to the physical product including all Supplier materials such as commercial, technical, harmonized implementation plan in a timely manner.

Produce governance documentation required for reviews with Upper Management, communication with suppliers, team metrics, etc. Present material as required in the different forums.

Be responsible to coordinate the Change Board reviews, prepare necessary documentation or presentations and document/communicate decisions and actions to key stakeholders. Follow-up on project actions.

Gather and document Business Cases as required.

Bachelor's degree in Engineering or equivalent with more than five (5) years of relevant work experience in the aerospace industry.

Specific knowledge of configuration management, change management and/or project management in aircraft is essential.

Demonstrate excellent communication skills in both French and English.

Possess very good negotiation skills.

Teamwork, customer orientation, leadership and innovation make you an effective person.

Are available to travel for short period of time in order to support the Toronto facility or meetings with suppliers.

Excel and PowerPoint knowledge is essential.
 
Job Number: 2269
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/31/2017
Last Updated: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Level 2

Description:
Aeronautical Engineer - Level 2

Location: Lexington, KY
Rate: $40.00 - $50.00/HR
Duration: 1+ year contract
Shift: 1st Shift

**Candidates must have an Active Secret Clearance or have had one with the last 2 years**

Description
- Evaluates structure integrity using classic and finite element methods.
- Employ classic analysis methods to derive loads using rigid body calculations followed by construction of shear and bending moment diagrams, with the ultimate objective of stress state interactions and fastened joint stress interactions to determine margins of safety.
- Employ finite element methods, using industry standard tools such as FEMAP and NASTRAN to develop more accurate stiffness representations of load paths to perform loads analysis, for both rigid body correlations and internal loads extraction in support of classic stress and fastened joint calculations.

Skill/Experience/Education
Mandatory:
FEMAP/NASTRAN/Classic Methods/Structures Stress/B.S. Degree Engineering

Desired:
ANSYS/AFGROW/Microsoft Office Suite
 
Job Number: 7492
Job Location: Lexington, KY
Rate: $40.00 - $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1+ yr
Input Date: 07/20/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Level 2

Description:
Aeronautical Engineer - Level 2

Location: Lexington, KY
Rate: $55.00 - $65.00/HR
Duration: 6+ month contract
1st Shift

**MUST have an Active Secret Clearance or have had one within the last 2 years**

Job Description:
- Evaluates structure integrity using classic and finite element methods.
- Employ classic analysis methods to derive loads using rigid body calculations followed by construction of shear and bending moment diagrams, with the ultimate objective of stress state interactions and fastened joint stress interactions to determine margins of safety.
- Employ finite element methods, using industry standard tools such as FEMAP and NASTRAN to develop more accurate stiffness representations of load paths to perform loads analysis, for both rigid body correlations and internal loads extraction in support of classic stress and fastened joint calculations.

Skill/Experience/Education
Mandatory:
- B.S. Degree Engineering
- 6 - 8 years of experience as Primary Structures Stress Engineer
- Femap
- NASTRAN
- Classic Methods

Desired:
- ANSYS/AFGROW,
- Microsoft Office Suite
 
Job Number: 7449
Job Location: Lexington, KY
Rate: $55.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 06/22/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Level 2

Description:
Aeronautical Engineer - Level 2

Location: Lexington, KY
Rate: $50.00 - $60.00/HR
Duration: 6+ month contract
Shift: 1st Shift

**Candidates must have an Active Secret Clearance or have had one with the last 2 years**

Description
- Evaluates structure integrity using classic and finite element methods.
- Employ classic analysis methods to derive loads using rigid body calculations followed by construction of shear and bending moment diagrams, with the ultimate objective of stress state interactions and fastened joint stress interactions to determine margins of safety.
- Employ finite element methods, using industry standard tools such as FEMAP and NASTRAN to develop more accurate stiffness representations of load paths to perform loads analysis, for both rigid body correlations and internal loads extraction in support of classic stress and fastened joint calculations.

Skill/Experience/Education
Mandatory:
FEMAP/NASTRAN/Classic Methods/Structures Stress/B.S. Degree Engineering

Desired:
ANSYS/AFGROW/Microsoft Office Suite
 
Job Number: 7491
Job Location: Lexington, KY
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 06/22/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Level 3

Description:
Aeronautical Engineer - Level 3

Location: Lexington, KY
Rate: $55.00 - $75.00/HR
Duration: 6+ month contract
1st Shift

**MUST have an Active Secret Clearance or have had one within the last 2 years**

Job Description:
- Evaluates structure integrity using classic and finite element methods.
- Employ classic analysis methods to derive loads using rigid body calculations followed by construction of shear and bending moment diagrams, with the ultimate objective of stress state interactions and fastened joint stress interactions to determine margins of safety.
- Employ finite element methods, using industry standard tools such as FEMAP and NASTRAN to develop more accurate stiffness representations of load paths to perform loads analysis, for both rigid body correlations and internal loads extraction in support of classic stress and fastened joint calculations.

Skill/Experience/Education
Mandatory:
- B.S. Degree Engineering
- 11+ years of experience as Primary Structures Stress Engineer
- Femap
- NASTRAN
- Classic Methods

Desired:
- ANSYS/AFGROW,
- Microsoft Office Suite
 
Job Number: 7485
Job Location: Lexington, KY
Rate: $55.00 - $75.00/HR
Per Diem: Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 06/26/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Lexington, KY
Rate: $55.00 - $75.00/HR
Duration: 6+ month contract
1st Shift
Overtime: Exempt

**MUST have an Active Secret Clearance or have had one within the last 2 years**

Job Description:
- Evaluates structure integrity using classic and finite element methods.
- Employ classic analysis methods to derive loads using rigid body calculations followed by construction of shear and bending moment diagrams, with the ultimate objective of stress state interactions and fastened joint stress interactions to determine margins of safety.
- Employ finite element methods, using industry standard tools such as FEMAP and NASTRAN to develop more accurate stiffness representations of load paths to perform loads analysis, for both rigid body correlations and internal loads extraction in support of classic stress and fastened joint calculations.

Skill/Experience/Education
Mandatory:
- B.S. Degree Engineering
- 5+ years of experience as Primary Structures Stress Engineer
- Femap
- NASTRAN
- Classic Methods

Desired:
- ANSYS/AFGROW,
- Microsoft Office Suite
 
Job Number: 7448
Job Location: Lexington, KY
Rate: $40.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 6+ mos
Input Date: 09/14/2017
Last Updated: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer – Level 3

Description:
Aeronautical Engineer – Level 3

Location: Lexington, KY
Rate: $55.00 - $75.00/HR
Duration: 6+ month contract
Shift: 1st Shift
Overtime: Exempt

**Candidates must have an Active Secret Clearance or have had one with the last 2 years**

Description
- Evaluates coupled solar radiation, airflow and conduction heat transfer by both classic methods and finite element analysis.
- Knowledge of a wide range of electronics equipment and cooling methods.
- Experienced in idealizing internal air flow and heat conduction paths into simplified representations to achieve efficient analysis.
- Determines appropriate boundary conditions, film coefficients and convection coefficients and is familiar with industry standard documents governing temperature requirements.
- Documents methods, calculations and results comprehensively and clearly, using industry standard substantiation format.

Skill/Experience/Education
Mandatory:
- 11+ years of experience with heat transfer
- Coupled Flow Field and Thermal/ANSYS/BSME

Desired:
FEMAP/Microsoft office suite/Stress Analysis Background
 
Job Number: 7494
Job Location: Lexington, KY
Rate: $55.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 6+ mos
Input Date: 09/14/2017
Last Updated: 10/30/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer – Level 3

Description:
Aeronautical Engineer – Level 3

Location: Lexington, KY
Rate: $60.00 - $75.00/HR
Duration: 6+ month contract
Shift: 1st Shift

**Candidates must have an Active Secret Clearance or have had one with the last 2 years**


Description
- Evaluates structure integrity using classic and finite element methods.
- Employ classic analysis methods to derive loads using rigid body calculations followed by construction of shear and bending moment diagrams, with the ultimate objective of stress state interactions and fastened joint stress interactions to determine margins of safety.
- Employ finite element methods, using industry standard tools such as FEMAP and NASTRAN to develop more accurate stiffness representations of load paths to perform loads analysis, for both rigid body correlations and internal loads extraction in support of classic stress and fastened joint calculations.

Skill/Experience/Education
Mandatory:
- 11+ years of structures and stress engineering
- Femap/NASTRAN/Classic Methods/Primary Structures Stress Engineer/B.S. Degree Engineering

Desired:
ANSYS/AFGROW, Microsoft Office Suite
 
Job Number: 7504
Job Location: Lexington, KY
Rate: $60.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 06/07/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer – Level 3

Description:
Aeronautical Engineer – Level 3

Location: Lexington, KY
Rate: $60.00 - $75.00/HR
Duration: 6+ month contract
Shift: 1st Shift

**Candidates must have an Active Secret Clearance or have had one with the last 2 years**


Description
- Evaluates structure integrity using classic and finite element methods.
- Employ classic analysis methods to derive loads using rigid body calculations followed by construction of shear and bending moment diagrams, with the ultimate objective of stress state interactions and fastened joint stress interactions to determine margins of safety.
- Employ finite element methods, using industry standard tools such as FEMAP and NASTRAN to develop more accurate stiffness representations of load paths to perform loads analysis, for both rigid body correlations and internal loads extraction in support of classic stress and fastened joint calculations.

Skill/Experience/Education
Mandatory:
- 11+ years of structures and stress engineering
- Femap/NASTRAN/Classic Methods/Primary Structures Stress Engineer/B.S. Degree Engineering

Desired:
ANSYS/AFGROW, Microsoft Office Suite
 
Job Number: 7505
Job Location: Lexington, KY
Rate: $60.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 10/30/2017
Last Updated: 11/14/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Advance Process Engineers - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring Aerospace Advance Process Engineers for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Advance Process Engineer shall evaluate processes and configure Aerospace assembly and sub-assembly systems and develop best practices within the production process.

Job Duties:

• Evaluate and improve on processes in assembly and sub-assembly systems
• Develop innovative solutions
• Work with equipment designers and manufacturing officers to develop a cost-effective and working production process
• Undertake scoping study level trade-off evaluations of process alternatives
• Assist in the preparation of project feasibility level capital and operating costs
• Assist in the development of plans, methods, design, materials handling, manpower requirements, cost analysis and other areas as appropriate
• Review design, management and interpretation of project studies, aimed at understanding the project scope, requirements and performance outcomes
• Search and assimilate information generated by others with the aim of solving relevant project issues
• Provide specialist technical input into team project work
• Provide input and evaluation into recovery estimates
• Act as the process lead on studies and projects
• Develop or bring forward, as appropriate, industry best practices and new technologies
• Oversee the development and maintenance of long and short term processing plans, processing designs and input into project development efforts as appropriate
• Prepare and review project proposals, studies and technical reports
• Oversee the cost effective, safe and timely completion of projects that meet or exceed expectations
• Apply a sound basic knowledge of safety, environment and related issues during the processing of projects
• Has the authority and obligation to stop production in case unsafe working conditions are observed
• Has the obligation to notify the Director IO and the President for Safety related matters requiring immediate attention

Qualifications:

• Bachelor of Applied Science or graduate degree in Engineering or related field
• A minimum of five (5) years’ of related Aerospace experience

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40014
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/07/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interior Design Engineer

Description:
Interior Design Engineer:
Location: Southeast USA
Duration: long term contract

The Interior Design Engineer will perform design engineering for cabin & cockpit structures, components, and trim for aircraft. The individual will also support tasks associated with interior Installations.

Duties and Responsibilities:
1. Creates conceptual designs for interiors of the aircraft through 3D modeling software, drawings, and/or drafting application.
2. Develops designs for form/fit/function to meet customer and design criteria.
3. Provides designs for the fabrication process including sheet metal, extrusions and inject molding
4. Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
5. Makes recommendations to engineering lead/management.
6. Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.
7. Ensures adherence to program schedule.
8. Performs other duties as assigned.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors’ degree in Mechanical, Aerospace or Civil Engineering from a four year college or university is required. (In lieu of degree, management may elect to consider individuals with a equivalent years of combined experience and training.)
2. Masters’ degree in Engineering preferred.
3. 8+ years of engineering experience with at least three years of design engineering experience directly related to mechanical/interior design for commercial aircraft.

Knowledge, Skills and Abilities:
1. Working knowledge of conceptual design development of aircraft interiors.
2. Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
3. In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
4. Familiarity with 14CFR Part 23/25.
5. Proficiency in CATIA V5 workbenches or equivalent 3D modeling tools (i.e. - Solidworks, Unigraphics, etc).
6. Proficiency in Teamcenter (or equivalent PLM tool).
7. Ability to work independently or within a team environment.
8. Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
9. Ability to work cross functionally with Quality and Production to resolve issues on the production line.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Southeast US
Rate: DOE
Per Diem: Yes
Overtime: Possible
Duration: 9+ months
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Aircraft Painter II

Description:
PDS Tech is seeking an  RS Acft Painter II for an open position in Savannah, GA.


The Aircraft Painter II works under minimum supervision to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures. 

Principal Duties and Responsibilities:

Essential Functions:
1. Safely perform aircraft preparation, painting, and detailing of aircraft under minimal supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. 2. Follow standard operating procedures when using tools and equipment such as dual action sanders, hydraulic lift platforms and paint sprayers. Properly care for and maintain shop equipment and tools. 3. Follow standard operating procedures when using sealants, paint strippers and corrosion-preventive chemicals and use protective equipment as required. 4. Comply with safety rules and procedures and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. 5. Use the material tracking system to create parts demand, track squawks and to sign-off work. 6. Assist with aircraft movement in hangars. 7. Offer continuous improvement ideas/participate in continuous improvement activities. 

Education and Experience Requirements: High school diploma/GED. Valid Drivers License required. Two (2) years experience in related paint processes. Aircraft industry experience preferred. A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics) is necessary.

Other Requirements: 1. Ability to read, write, speak, and understand the English language. 2. Able to use tools and equipment associated with the aircraft painting process. 3. Ability to read and interpret blueprints and engineering documentation. 4. Able to pass Pulmonary Function Test to obtain respirator certification. 5. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 6. Must be computer literate.

Unique Skills: Aircraft Painting Skills

POC:  Clyde (813) 426-9917 or ccallwood@pdstech.com 


 
Job Number: 1710072520
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/23/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023B6tAAE&URLSource=cjhunter

Branch Manager

Description:
Our Client: Intl Freight Forwarder, Seeking:

BRANCH MANAGER- SAN FRANCISCO, CA
Overseeing 8-10 Direct reports with a Branch operation of 35-45.

Fulfill and exceed customer expectations by providing the highest possible service quality to the customers
* Optimize the transaction, Increase sales and decrease costs
* Responsible for strong growth within the Branch and maximal utilization of business potential
* Continuous strive for high productivity, competitive efficiency and best quality
* Willcontinuously strive for maximum productivity to assume best use of all resources
* Fully adhere to all defined global processes, policies and standards and to local law

Responsibility for all operational activities of Branch.
* Responsible for the financial results and the continuous supervision of the financial status, including activities in the field of accounting, financial controlling and strategic planning
* Prepare the local budget including the investment program, together with detailed documentation according to the instructions issued by Corporate Controlling
* Develop and expand customer relationships
* Implement the Internal Control System (ICS) and all processes included in the Internal Management System (IMS)
* Responsible for the standardization of processes, structures and systems according to corporate decisions
* Arrange and continuously optimize organizational structures, including internal service providers, shared service and competence centers.
* Responsible for the supervision of personnel matters, with particular emphasis on staff training and career planning in cooperation with local HR
* Ensure the adherence to instructions, policies and guidelines defined by Global Process and corporate functions

Inform him/herself about all applicable local and international laws, regulations, and legal obligations and of ensuring compliance
* Ensure a regular and consistent information flow to the Country/Area Management about all important matters.
* Responsibility for budget and business performance on Branch level
* Disciplinary responsibility for all direct reports
* As defined in the Global Signing Policy

Functional know-how in air / logistics / SCM
* Understanding of Company's strategy and products
* Knowledge about markets & competitors, about trends & challenges for our industry
* Business Acumen (understands principles and language, incl. the fundamentals of finance and profitability
* Solid business administration competence
* Has an overall understanding of business processes and independencies


Job Requirements:
* Good strategic and planning skills, ability to translate strategy to operational plan and execute
* Proven track record in People management and Leadership Skills (knowledgeable in Recruitment Selection/Training/Development/Coaching/Conflict Management/Performance Management)
* Good communication skills (open and confidential communication style)
* Solid know how in change management and innovation (analytical, systematic, creative, inventive)
* Strong decision-making capabilities and high accountability
* High result orientation and customer focus
* Ability to integrate and coordinate efforts/resources across functions and boundaries
* Management and organizational skills (prioritize, plan, assign, delegate, control)
* Act as a role model for Corporate Values and fully adheres to the Code of Conduct

Educational background / Work Experience

* Higher education level in Forwarding and Business Administration, B.S. Degree Preferred.
* Management experience (minimum 5 years)
* Working experience (minimum 5 years)
* Industry experience (minimum 3 years)
* Preferably international working experience

Fluent IN ENGLISH.

Company offers comprehensive package : including major medical, 401K, Generous car allowance, Manager Bonus Incentive Program.
 
Job Number: 158476
Job Location: San Francisco, CA
Rate: $62 to $67.00 DOE
Duration: Perm
Input Date: 10/07/2016
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Lisa Roll
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lroll@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Project Spec II - Special Missions

Description:
UNIQUE SKILLS
This position provides technical and project oversight of projects for TC design changes and STCs to clients' certified aircraft. The chosen candidate will serve as a liaison between the company and FAA/ODA, engineering focal and other Civil Aviation Authorities. Qualified Candidates: - must be detail oriented and thorough - must demonstrate strong technical writing skills of certification documentation - must be experienced in establishing Certification project plans and leading projects to closure - have ability to handle multiple cert projects simultaneously - be a good team player - Certification projects experience in Special Missions projects and STCs is highly desirable

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree Engineering, Business or related field or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years supporting engineering certification projects and/or activities.

POSITION PURPOSE
Under minimum supervision, performs a variety of engineering tasks to support MRA (Major Repairs and Alterations), STC (Supplemental Type Certificate), TC (Type Certificate) and/or other regulatory approval project processes including review of data packages, identification of procedural and certification issues, and providing guidance to engineering on procedures and regulations.

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Reviews STC/TC/MRA data packages prior to submission to the FAA (Federal Aviation Administration) for completeness and adherence to the established requirements. Makes decisions and recommendations that are recognized as authoritative to ensure STC/TC/MRA documentation is prepared and processed in accordance with approved procedures.
2. Assists department manager/ODA Program/Project Administrator in providing training and guidance concerning ODA procedures. 3. Demonstrates creativity, foresight, and mature engineering judgment in anticipating and solving procedural issues that may impact the schedule of STC/TC/MRA issuance.
4. Interfaces with local and foreign authorities on issues related to STC/TC/MRA projects.
5. Actively works to improve the department processes and ensures all work meets customer requirements and expectations.
6. Maintains a current and up-to-date knowledge in the field in order to recommend process changes or innovations that will improve the quality, economy, and effectiveness of the company products.

ADDITIONAL FUNCTIONS
1. Familiar with working regulatory issues and coordinating closure of Issue Papers and other certification issues.
2. Develops department training material.
3. Assumes responsibility for assigned projects, tasks, or processes.
4. Assists department manager/ODA Program/Project Administrator in resolving standardization issues.
5. Keeps abreast of changes to regulatory requirements and guidance material.
6. Minimum travel required. Perform other duties as assigned.

OTHER REQUIREMENTS
1. Must be proficient in working with MS Office software.
2. Strong background with Federal Aviation Administration (FAA) certification processes.
3. Strong background with Federal Regulations (14 CFR Part 21, 23, 25, 43, 91, 135 and 183) and associated guidance material.
4. Must be very experienced in working with regulatory requirements.
5. Must possess excellent attention to detail and display the ability to effectively adjust to changing engineering practices and procedures.
6. Must have excellent organizational and planning skills.
 
Job Number: 17-773-110241
Job Location: Southeast
Rate: $40.00 to $45.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Project Spec II - Special Missions

Description:
Certification Project Spec II - Special Missions

Location: Savannah, GA
Pay Rate: $40/hr - $45/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-This position provides technical and project oversight of projects for TC design changes and STCs to Company's certified aircraft.
-The chosen candidate will serve as a liaison between the company and FAA/ODA, engineering focal and other Civil Aviation Authorities.

Qualified Candidates:
- must be detail oriented and thorough
- must demonstrate strong technical writing skills of certification documentation
- must be experienced in establishing Certification project plans and leading projects to closure
- have ability to handle multiple cert projects simultaneously
- be a good team player
- Certification projects experience in Special Missions projects and STCs is highly desirable

Education and Experience Requirements:
Bachelor's Degree Engineering, Business or related field or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years supporting engineering certification projects and/or activities.

Position Purpose:
Under minimum supervision, performs a variety of engineering tasks to support MRA (Major Repairs and Alterations), STC (Supplemental Type Certificate), TC (Type Certificate) and/or other regulatory approval project processes including review of data packages, identification of procedural and certification issues, and providing guidance to engineering on procedures and regulations.

Principle Duties and Responsibilities/Essential Functions:
1. Reviews STC/TC/MRA data packages prior to submission to the FAA (Federal Aviation Administration) for completeness and adherence to the established requirements. Makes decisions and recommendations that are recognized as authoritative to ensure STC/TC/MRA documentation is prepared and processed in accordance with approved procedures.
2. Assists department manager/ODA Program/Project Administrator in providing training and guidance concerning ODA procedures.
3. Demonstrates creativity, foresight, and mature engineering judgment in anticipating and solving procedural issues that may impact the schedule of STC/TC/MRA issuance.
4. Interfaces with local and foreign authorities on issues related to STC/TC/MRA projects.
5. Actively works to improve the department processes and ensures all work meets customer requirements and expectations.
6. Maintains a current and up-to-date knowledge in the field in order to recommend process changes or innovations that will improve the quality, economy, and effectiveness of the company products.

Additional Functions:
1. Familiar with working regulatory issues and coordinating closure of Issue Papers and other certification issues.
2. Develops department training material.
3. Assumes responsibility for assigned projects, tasks, or processes.
4. Assists department manager/ODA Program/Project Administrator in resolving standardization issues.
5. Keeps abreast of changes to regulatory requirements and guidance material. 6. Minimum travel required. Perform other duties as assigned.

Other Requirements:
1. Must be proficient in working with MS Office software.
2. Strong background with Federal Aviation Administration (FAA) certification processes.
3. Strong background with Federal Regulations (14 CFR Part 21, 23, 25, 43, 91, 135 and 183) and associated guidance material.
4. Must be very experienced in working with regulatory requirements.
5. Must possess excellent attention to detail and display the ability to effectively adjust to changing engineering practices and procedures.
6. Must have excellent organizational and planning skills.
 
Job Number: 7733
Job Location: Savannah, GA
Rate: 40-45
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/09/2017
Last Updated: 10/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Commercial Avionics Systems Engineer -

Description:
Johnson Service Group (JSG) is seeking a candidate for a Commercial Avionics Systems Engineer to be an integral part of a small and fast-paced team supporting the engineering projects, product development, and test.

Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.

Airframes may include, but are not limited to S-76, S-92 and their derivatives, including integration of new technologies into the S-92.

Primary Responsibilities

Development of requirements
System Integration
Generation of lab and aircraft test procedures
Troubleshooting avionics issues on test, production and fielded aircraft
Support program management reviews
Beneficial Experience

FAA and foreign certification (preferred)
DO-178B, DO-160 and DO-254 processes (preferred)
Technical project management (preferred)
Supplier technical management (preferred)
Pilot or A&P experience (preferred)
Educational Requirements:

BS Engineering in a related field w/7+ years relevant professional experience
Will consider non-degreed candidate's who have equivalent professional experience (11+ years)
 
Job Number: 356482
Job Location: Trumbull, CT
Rate: $56hr
Per Diem: yes
Overtime: possible
Duration: 15 months
Start Date: asap
Input Date: 08/04/2017
Last Updated: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer - Level 2

Description:
Components Engineer - Level 2

Location: Dallas, TX (Grand Prairie, TX)
Rate: $65.00 - $75.00/HR
Duration: 1 year contract
Shift: 1st Shift

**MUST be a U.S. Citizen**
**MUST be able to obtain a Secret security clearance**

Description:
- Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements.
- Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components.
- Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records.
- Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.


Skill/Experience/Education
Mandatory:
- Must have parts management experience working with designers to select components for use in designs.
- Must have obsolescence experience working with component lists and industry tools to evaluate part availability and determining path forward when issues are identified.
- Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
- Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages.
- Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance.
- The candidate will periodically be required to make presentations to program management and customers.
- Must have ability to obtain a Secret security clearance.


Desired:
- Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies.
- Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.
 
Job Number: 7584
Job Location: Dallas, TX
Rate: $65.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 01/19/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer - Level 2 / Obsolescence / Parts Management / Must have ability to obtain a Secret security clearance TX

Description:
159780
Requirement# MFC-REQ-1421
Work location Dallas, TX
Work Week 9/80
Priority
Needed Date 07/05/2017
End Date 07/05/2018
Number of Resources 1
Security Clearance Ability to Obtain Secret
(Prime Contract:, Can start w/o clearance:Yes, Interim Clearance Sufficient:Yes)

Type of Service: Engineering
Title: Components Engineer - Level 2
Description
Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.

Skill/Experience/Education
Mandatory:

Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers. Must have ability to obtain a Secret security clearance.
Desired:

Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies. Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.

Skill Matrix

Parts Management Working with designers to select components for use in designs. 0-3 Years Yes
Obsolescence Work with component lists and industry tools to evaluate part availability and determining path forward when issues are identified. 0-3 Years Yes



Interview Required Yes
Max Pay Rate 75.00 USD
Shift 1st Shift
OT Allowed No
Travel No
Non-Exempt
 
Job Number: JE-1421
Job Location: Dallas, TX
Rate: 75/hr max
Duration: 12 month contract
Input Date: 10/13/2017
Last Updated: 10/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer (6 openings)

Description:
Composite Structural Design Engineer (6 openings)
Location: Mojave, CA
Duration: 12+ months
Hourly rate: Open, DOE
Desired Skills: MICROSOFT OFFICE;CATIA; Structural design of primary and secondary composite aircraft structure.
Composite Structural Design Engineer Job Description
Perform preliminary and detail design of metallic and composite structure, including initial sizing of joints, structure layout and design for manufacturability.
Create 3D/2D definition of parts, assemblies and installations.
CATIA V5, Composites workbench is a plus.
Establish manufacturing tolerances for production of structural components using GD&T.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements
Works with Industrial Design team to develop conceptual designs for cabin interior
Develops rapid prototypes for evaluation throughout design development process
Develops 3D CAD models and 2D engineering definition for detail parts, assemblies, and installations inside the pressurized cabin
Establishes manufacturing tolerances for production of structural components
Develops and documents system requirements and interface constraints for components
Coordinates with Analysis and Testing departments to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes .
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)
Educational Requirements
Bachelor's degree from an accredited institution, with a concentration in Aeronautical and Astronautical, Aerospace, or Mechanical Engineering..
Composite Structural Design Engineer requirements:
3 years or more experience design engineering for aerospace composite fabrication and assembly processes.
Proficient with CATIA V5
Required Workbenches: Part Design, Assembly Design, Sketcher, Drafting, Wireframe and Surface Design
Desired Workbenches: Generative Shape Design (GSD), Composites (CPD) Experience using GD&T and ASME Y14.5M-1994 drafting standards
Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
Experience designing for aerospace environments
D_ _esired Experience in the development of human spaceflight hardware desired
Experience with Product Lifecycle Management (PLM) software and configuration management processes
Excellent analytical and decision-making skills Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.
Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook
Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
Composite Structural Design Engineer
The Structures Company, LLC is an AA/EOE.
 
Job Location: Mojave, CA
Rate: "open"
Per Diem: yes
Overtime: possible
Duration: 12+ month
Start Date: asap
Input Date: 09/19/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Senior / Design Engineer

Description:
RESPONSIBILITIES
Creates basic designs of aircraft interiors, structures and mechanical systems for Fit, Form and Function to meet customer criteria, quality standards, FAA requirements, budget and project schedules using Computer Aided Drafting/Design tools.
• Designs and checks aircraft interior furnishing and/or structures.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.

TARGET QUALIFICATIONS
• Bachelor's degree (B.S.) in engineering, minimum of 5 years relevant experience, or equivalent combination of education and experience. Aviation background and aircraft interior experience preferred.
• Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

IN-DEPTH KNOWLEDGE, SKILLS, AND ABILITIES
• Ability to design and check interior engineering drawings for Fit, Form and Function.
• Strong Computer Aided Drafting/Design skills using AutoCAD and/or Inventor.
• Three dimensional (3D) design/drafting skills are preferred.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally as part of an established and growing team.
 
Job Number: 17-712
Job Location: Northwest
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
1. Review 3D engineering data for conformance to requirements as directed.
2. Check parts for fit, form and function to the extent that information is available.
3. Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
1. Accuracy and completeness of engineering product definition data, including CAD and PDM data.
2. Proper application and compliance with all Engineering and customer drawing requirements.
3. Use and understanding of GD & T a must.
4. Dimensioning and tolerancing including familiarity with ASME Y14.5.
5. Application of best drafting and design practices and procedures.
6. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
7. Advise Design personnel regarding company drawing and design practices and procedures.
8. Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
9. Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
10. Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
11. Knowledge of company parts list & PdocM, a plus.
12. Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
1. Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
2. Ensures designs meet customer criteria, quality standards and FAA requirements.
3. Adheres to budget and project schedules.
4. Provides design guidance and feedback to other engineering personnel.
5. Other duties as assigned.
6. Knowledge of industry design and documentation standards.
7. Experience with mechanical assemblies and manufacturing technique design.
8. Ability to work independently and cross-functionally.
9. Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills.
10. Knowledge of Excel, Share Point software, Microsoft Office a plus

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-191
Job Location: Savannah, GA
Rate: $50.00 - $55.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Mechanical

Description:
SKILLS AND KNOWLEDGE:
• Ability to solve practical problems and deal with variables in an environment where limited standardization exists.
• Must be adaptable and flexible at all times and apply knowledge and skills to develop creative solutions to a wide variety of unique design, modification, and repair problems encountered.
• Strong PC skills will include e-mail, word processing, spreadsheet, communications, operating systems, and advanced computer drafting skills.
• Ability to accomplish basic stress analysis and substantiation for complex repairs or modifications using standard accepted industry practices and other structural design methodologies.
• Ability to understand regulatory requirements for airworthiness, for the FAA and various foreign authorities (JAA, JAR, CAA, DGAC, CAAC, etc.) and include in engineering documents, drawings and designs.
• Ability to understand and promote the policies / procedures of company and company Engineering.
• Ability to understand and apply the policies / procedures of all customer(s).
• Ability to understand and apply information from Structural Repair Manuals (SRMs), Aircraft Maintenance Manuals (MMs), Illustrated Parts Catalogs (IPCs), Service Bulletins (SBs) and other aircraft reference materials.
• Ability to interpret and use aircraft manufacturing, assembly, and installation drawings.
• Assertive communication skills are required.
 
Job Location: Everett, WA
Input Date: 10/03/2017
Firm Name: APA SERVICES
Attention: Kami M Muehlberger
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Die Engineering Leads - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring Die Engineering Leads for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Conduct Stamping Simulation, Sheet metal Die Development, Die Compensation, Die Manufacturing, Die trial and Virtual Die Tryout in conjunction with Project Management and Customer Engineering teams
• Perform binder development and draw simulations to ensure safe panels per customer requirements and standards within program timing constraints
• Analyze spring back, surface abnormalities and other non-conformance and recommend compensation or other countermeasures
• Develop trim lines, die faces and break lines per customer standards and product requirements
• Understand GD&T and tolerance stack ups, make recommendations for to ensure feasible product can be released within program timing constraints
• Perform scrap shed analysis and enact countermeasures for non-conformance areas
• Provide feedback to die build source for optimal die processes and die designs
• Interact with customer Product teams and Project Management to ensure feasibility of all details within timing requirements
• Support of cost reduction/value engineering initiatives
• Use of software, including but not limited to Autoform, Dynaform, Omnicad, CATIA V5 R19, UG NX, and LS Dyna 5.7

Qualifications:

• B.S. in Materials Science, Mechanical Engineering, Industrial Systems Engineering, or relevant area of study Graduate degree is preferred
• 2 – 5 years of experience with Autoform, Dynaform, Omnicad, CATIA V5 R19, UG NX, and LS Dyna 5.7
• Understanding of modeling concepts that correlates with actual die construction
• Must be able to collaborate and work in a team environment with a high level of interpersonal skills
• Must be able to create technical reports and have excellent presentation skills
• Must have a basic understanding of sheet metal forming principals
• Keep up to date with latest die processes and tooling trends to maintain industry leading skills
• Extensive understanding of sheet metal forming principals, materials commonly used in today’s applications and be able to recommend material alternatives based on application and product geometry
• High level of analytical ability where problem solving is a must
• Excellent written and verbal communication and presentation skills

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40026
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/07/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Digital Design Engineer

Description:
The client is an established pioneer in space exploration and military/defense technology. A leader in high technology and engineering services, the client is world renowned for its expertise in the areas of infrared detection and space & missile electronics. As a first-rank engineering and production company, the client is engaged in the design, development, and manufacture of highly-sophisticated electronics equipment that is used in a variety of product areas for government, civil and commercial applications.

Electrical Engineer to support new product development within the Space Products development team. In this role, you will have the opportunity to be part of a team that designs and implements spacecraft and launch vehicle communication and avionics equipment.

Responsibilities include digital systems design using VHDL to develop and implement digital wireless receivers, transmitters, transponders, and launch vehicle avionics equipment. Candidates with experience developing algorithms for digital signal processing, forward error correction coding and decoding, encryption/decryption, waveforms and data protocols in FPGAs are desired. System modeling and simulation capabilities utilizing MatLab/ Simulink and ModelSim/Questa tools are preferred.

The position involves working in teams to generate technical proposals, present at design reviews, perform requirements development, system architecture development, system partitioning, assessing system performance using analysis, simulation, and laboratory testing

This position requires a BSEE, BSEET, or BSECE degree. We are seeking a candidate with 3 years of demonstrated experience in the specification, design, implementation, simulation, test, verification, validation, and debugging of digital communication systems, avionics systems, and/or control systems. Experience with Actel FPGAs is a plus.
 
Job Number: 17-779-9286
Job Location: Midwest
Rate: $70.00 to $90.00/per hour
Per Diem: No
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Director, Training & Flight Operations

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for Director, Training & Flight Operations, Customer Support Division for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

In this role, you will be responsible for the development and delivery of Regional Jet Customer training, flight manuals and flight operations engineering support. 



  • Training services include the development of courseware, training devices, training manuals and delivery of initial and recurrent training for Pilots, Technical/Mechanics, Cabin Crews, Ground Servicing Crews, and Dispatchers within an airline. In addition, this person must manage the relationship and performance of CAE, the Company's selected training service provider. 
  • Development, verification/validation and certification of flight operations manuals
  • Flight Operations Engineering support to Company's customers


Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team and team structure, implementing governance and communication processes, and evaluating the performance of the group.


Work Location
The Primary Work Location will be Nagoya, Japan.  Travel to USA or other country will be required.

Scope of Work
Specific Training responsibilities include:

  • Overall management of the relationship with and performance of CAE, Company’s training services provider, ensuring training devices and services are high quality at market prices
  • Development and maintenance of training curriculum and courseware for pilots, technicians/mechanics, flight attendants, and flight planning engineers, and ground handling services
  • Development and maintenance of training documentation for each course offered
  • Ensure there are sufficient qualified training instructors located at training delivery sites for the life of the aircraft
  • Ensure training devices (e.g., Full Flight Simulators (FFS), Integrated Procedures Trainers (IPT), Virtual Maintenance Trainers (VMT), Computer Based Training (CBT), Door Trainer and Cabin Trainers) & training facilities meet training objectives and are certified (where applicable) by regulators
  • Obtain regulator certifications such as OSD, FSB, etc.
  • Commitment of training services (both proforma and for fee) to customers as part of the airplane sales process
  • Scheduling customer training at a location that minimizes customer travel costs, meets customer requirements for timing (schedule), and fits within the Company's Training Program strategy.

 
Specific Flight Operations Support responsibilities include:

  • Define the process interfaces with Flight Test organization, Pilot organization and Flight operation engineering organization. 
  • Development, verification/validation, maintenance and delivery of all technical and administrative documents in support of customer’s flight operations.
    • Airplane Flight Manual (AFM)
    • Flight Crew Operating Manual (FCOM)
    • Quick Reference Handbook (QRH)
    • Weight & Balance Manual (WBM)
    • Master Minimum Equipment List (MMEL)
    • Dispatch Deviation Guide (DDG)
    • Flight Crew Training Manual (FCTM)
    • Cabin Crew Operating Manual (CCOM)
    • Aircraft Characteristics for Airport Planning (AC)



  • Ensure documents meet industry standards for content and format by participating in and influencing industry standards board that define flight operations documentation requirements
  • Create airplane performance databases and may provide specialized training courses to customers to assist them in their understanding and use of the airplane and documents listed above.  Such courses may include:
    • Performance Engineers course
    • Weight & Balance course

  • Review and approve requests from airlines for non-normal operations such as flight with missing secondary structure
  • Respond to Flight Operations related Customer Service Requests.  Utilize the Safety Process for emergent Flight Operations related Safety issues.
  • Prepare and Release Flight Operations Bulletins.  MITAC must define both a Routine bulletin type as well as an Alert bulletin type to correspond to the Maintenance related Service Bulletins
  • Define a change process that addresses Flight Operations related changes that may impact the certification basis of the airplane (e.g. Airplane Flight Manual)

Expected Education/Experience and Skills:



  1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
  2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in managerial positions providing Training and/or Flight Operations management functions to commercial airline customers.
  3. Commercial pilots license preferred.
  4. Candidates must have skills and experience managing Partners and Suppliers.

 
Job Number: 1710068573
Job Location: Nagoya,
Duration: 36 months
Input Date: 05/24/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002JqSMAA0&URLSource=cjhunter

Electrical Design Engineer

Description:
Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
- Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill
and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7701
Job Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 05/17/2018
Last Updated: 07/18/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
• Responsible for developing, modifying and implementing electrical power distribution and avionics system designs
• Originate specifications, control documents, test plans, test reports, and / or other documentation in support of repairs, and STC electrical power distribution and avionics alterations, design and development activities
• Support project efforts to interpret customer requirements into system requirements and specifications
• Prepare material for, and conduct periodic design reviews
• Apply certification, inspection and maintainability requirements to the design
• Ensure that all specifications, designs and developments adhere to civil aviation, technical and aerospace industry standards
• Provide support in the development and maintaining of configuration baselines for aircraft / avionics systems and sub-systems
• Familiar with computer-aided design and drafting packages including AutoCAD
 
Input Date: 08/30/2017
Firm Name: JOHNSON SERVICE GROUP
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Huntsville, Al, Tucson, Az or McKinney, Tx
Sr. Electrical Engineer I - 39357
Hunstville, AL
Senior Designer or Electrical Engineer with understanding and wide application of technical theories, and concepts in digital design, with general knowledge of other related disciplines. The Senior Designer provides technical solutions to a wide range of difficult problems. This position will function in a multi-disciplined design team. The person will be the Responsible Engineering Authority (REA) for hardware design, fabrication, assembly, test, and integration of a circuit card. Designs include technology of processors, FPGAs, memory, and industry interfaces, such as PCIe, Ethernet, I2C, UART. Candidates can independently determine and develop approach to solutions to contribute to the completion of specific programs and projects.

Required Skills:
• A minimum of 4 years’ experience in Digital Design
• Proven ability to take a design concept from the block diagram or requirements level and develop a complete hardware design
• Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution.
• Experience with embedded test techniques, design for test, design margin analysis and circuit design for production • A strong advocate for process improvement
• A self-motivated and effective communicator • Experience in managing schedule and resources to meet assigned milestones • Ability to obtain and retain security clearance

Desired Skills:
• Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES)
• Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)
• Six Sigma specialist


Required Education (including Major):
Bachelor’s Degree in Electrical Engineering (MS preferred) or similar degree and meets the experience requirements
 
Job Number: 39357
Job Location: Huntsville, Al
Duration: 18 months
Start Date: ASAP
Input Date: 08/30/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1700 WELLS RD STE 1
City, State: ORANGE PARK, FL 32073-2373
Phone: 904/562-3215
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

Electrical Engineer

Description:
PDS is seeking a Electrical Engineer TS I  for an open position in Savannah, GA.
In your role, you will:


Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions:

1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

Education and Experience Requirements:



Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD. 

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline

Unique Skills: Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com 
 
Job Number: 1710071488
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/02/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i5000000238B7AAI&URLSource=cjhunter

Electrical Engineer

Description:

PDS Tech, Inc. is seeking an Electrical Engineer for a position located in Kansas City, MO. 
Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

The Client's organization has several open opportunities for Electrical Engineers.  We are seeking engineers who are interested in supporting one or more of the following areas:  electrical and/or electronic components and major assemblies; discrete and custom devices; complex cables; RF/radar/antenna devices and components; test equipment hardware and/or software; test & controls; purchased and COTS products; control account management.

  • Performs project planning and manages project resources, including multiple individuals and disciplines, to achieve quality, delivery, and cost objectives.
  • Conducts research and development experiments to resolve complex engineering and quality problems involving highly technical, scientific methods.
  • Writes technical reports on results and conclusions drawn from experiments conducted and incorporates findings in formal specifications.
  • Translates design agency concepts into production items by coordinating the activities of engineering, quality, manufacturing, and related organizations.
  • Estimates set-up times, flow times, costs of production and acceptance equipment, and compiles cost estimates and delivery quotations, monitors performance, and prepares reports, statistics, and recommendations for management review.
  • Contributes to business growth through the pursuit of new technology; participates in establishing operating procedures on new products and components.
  • Defines and recommends new designs, design changes, and alternate designs of instruments, and test equipment, and orders tooling, gaging, and equipment necessary to assure product quality.
  • Plans and performs engineering testing and development programs and uses advanced statistical and scientific methods to address and resolve critical engineering and production problems to assure product manufacturability.
  • Originates, refines, and releases complex manufacturing or inspection work directions.
  • Determines acceptability of processes and materials in conjunction with customers, design agency, quality, and other affected organizations.
  • Interacts with customers, design agency and/or supplier counterparts to resolve moderate to complex design, development, production and acceptance issues.
  • Based on research, applies, develops and recommends innovative methodologies and technologies which are equal to the industry's state of the art to resolve processing and design problems.
  • Provides technical consultation to management and others, and leads technical project teams. 
  • Responsible for work that may involve longer range and/or complex business objectives in field of expertise.
  • Evaluates and implements innovations and technological advances that improve quality, reduce flowtime, improve productivity, and enhance operational surety.
  • Performs highly complex calibration and measurement services, recommends changes in calibration procedures to improve services, and solves special measurement problems.
  • May perform other duties as required.
  • Conducts activities in a safe and healthy manner and works in accordance with established HS&E requirements to ensure the protection of employees, the public, and the environment.  Takes actions necessary to "stop" work when an unsafe condition or action is identified.  Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

Basic Qualifications: 
  • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
  • Bachelor of Science degree in Electrical Engineering from an ABET accredited program or an equivalent ABET accredited engineering degree.
  • Minimum two (2) years directly applied engineering experience.


Additional Qualifications: 

  • Five (5) or more years directly applied engineering experience in a technology and/or manufacturing environment preferred.
  • Advanced degree in an engineering, physics or business discipline is advantageous.
  • Six Sigma certification (black belt; green belt) preferred.
  • Experience/history reflective of executing continuous improvement toward products and/or processes.
  • Technical project management experience.
  • Experience/familiarity with enterprise resource planning and/or earned value management systems.
  • Experience presenting technical material to varied levels of audiences.
  • Willingness to travel up to 25% of time.

 
Job Number: 1710068676
Job Location: KS City, MO
Duration: 6 months
Input Date: 05/25/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tanya James
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002Jr0WAAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer reports to the Engineering Manager. The Electrical Engineer plans, designs, and oversees the installation, operation and maintenance of electrical/electronic components, equipment, and systems. Furthermore, acts as a focal point/ individual contributor with respect to electrical and electromagnetic compatibility compliance to industry/regulatory requirements and standards for airborne applications such as RTCA DO-160 or MIL-STD-461E.
Electrical Engineer performs conventional, moderately complex engineering assignments that may involve component, equipment or product design, simulation, testing, and preparation of specifications, process studies, and/or research investigations. Instructions are provided on task specifications and design constraints. Close guidance on new design or applications is provided.


JOB RESPONSIBILITIES

• Applies standard engineering techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.
• Performs low to medium complex circuit/wiring design activities and, subsequently, prepares appropriate validation and verification means.
• Supports product certification/qualification with subject matter knowledge and exercise professional judgment whilst supporting other business functions.
• Typically focuses on existing products or processes.
• Liaises with drafters, technicians, and others to contribute to project completion.
• Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.
• Performs other related duties as required.



MINIMUM REQUIREMENTS:
• Bachelor's degree in Electrical Engineering from an accredited four-year college or university; and three-to-five years related professional experience and/or training; alternatively, an equivalent combination of education and experience.
• Aerospace industry experience is strongly preferred.
• Must be proficient with basic physical laws/techniques as applied in electrical engineering (e.g. Ohm’s Law, Kirchhoff’s Laws), electromagnetic characteristics of materials, electrical circuit theory, two-pole and four-pole theory, Maxwell equations, and basic linear/digital/power electronics.
 
Job Location: Everett, WA
Rate: Negotiable
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/17/2017
Last Updated: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Location: Grand Prairie, TX
Pay Rate: DOE ($40/hr - $45/hr)
Duration: 6+ month contract
Schedule: 9/80
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Description
-Electrical design support will be required to support missile electrical architecture trade studies and concept design.
-Overall missile electrical design and particular focus for the control actuation system design is required.
-Candidate may need to work with component suppliers.
-The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-The engineer must be proficient in EE toolsets; have good communication skills, and be able to work with internal and external customers.

Skill/Experience/Education (Mandatory):
-Researches, develops, designs, and tests electrical components, equipment, systems, and networks.
-Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
-Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or no experience required with a related Masters degree.
-Considered experienced, but still a learner.
 
Job Number: 7136
Job Location: Grand Prairie, TX
Rate: 40-45
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 08/29/2017
Last Updated: 10/03/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Engineer - Product/Process

Description:
PDS Tech, Inc. is seeking a Product/Process Electrical  Engineer for a position located in Kansas City, MO. 
Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

This Electrical Engineer position will fulfill a technical role in the Secure Electronics organization. Engineers in this organization provide engineering support of highly technical and advanced manufacturing processes typically requiring specialized qualifications, knowledge, and/or skill. This engineer will perform project management, as well as, design, development, evaluation, and quality control functions on complex engineering projects and electrical assembly devices. While in the position, increasing roles of project leadership are expected. This position will exercise considerable latitude in determining technical objectives of assignments.

Summary of Duties:   
 Performs project planning and manages project resources, including multiple individuals and disciplines, to achieve quality, delivery, and cost objectives.
  • Conducts research and development experiments to resolve complex engineering and quality problems involving technical, scientific methods.
  • Writes technical reports on results and conclusions drawn from experiments conducted and incorporates findings in formal specifications.
  • Translates design agency concepts into production items by coordinating the activities of engineering, quality, manufacturing, and related organizations.
  • Estimates set-up times, flow times, costs of production and acceptance equipment, and compiles cost estimates and delivery quotations, monitors performance, and prepares reports, statistics, and recommendations for management review.
  • Participates in establishing operating procedures on new products and components.
  • Defines and recommends new designs, design changes, and alternate designs of instruments, and test equipment, and orders tooling, gaging, and equipment necessary to assure product quality.
  • Plans and performs engineering testing and development programs and uses advanced statistical and scientific methods to address and resolve critical engineering and production problems to assure product manufacturability.
  • Originates, refines, and releases complex manufacturing or inspection work directions.
  • Determines acceptability of processes and materials in conjunction with customers, design agency, quality, and other affected organizations.
  • Based on research, applies, develops and recommends innovative methodologies and technologies which are equal to the industry's state of the art to resolve processing and design problems.
  • Provides technical consultation to management and others, and leads technical project teams.
  • Responsible for work that may involve longer range and/or complex business objectives in field of expertise.
  • Evaluates and implements innovations and technological advances that improve quality, reduce flowtime, improve productivity, and enhance operational surety.
  • Performs highly complex calibration and measurement services, recommends changes in calibration procedures to improve services, and solves special measurement problems.
  • May perform other duties as required.
  • Conducts activities in a safe and healthy manner and works in accordance with established HS&E requirements to ensure the protection of employees, the public, and the environment. Takes actions necessary to "stop" work when an unsafe condition or action is identified. Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

Basic Qualifications: 
  • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
  • Bachelor of Science degree in Electrical Engineering from an accredited Engineering program.
  • Two (2) or more years of relevant experience in engineering of products or processes or comparable related technical area. 

Additional Qualifications:  
 
  • Existing DOE Q clearance.
  • MS in Electrical Engineering from ABET accredited institution.
  • Five (5) or more years of relevant, progressive experience preferred in engineering of products or processes or comparable technical area.
  • Demonstrated experience in project leadership.
  • Broad knowledge of manufacturing or quality processes and techniques.
  • Ability to apply advanced design, development, evaluation, and quality control techniques to highly complex.
  • Electrical Engineering concepts and projects.
  • Ability to work without supervision, with latitude for independent action and decision making.
  • Ability to provide technical guidance, project management, consultative services, and innovative solutions.
  • RF engineering experience.
  • Strong communication skills, both written and verbal.
  • Demonstrated technical innovation and problem solving.
  • Significant experience in a manufacturing or design environment.

 
Job Number: 1710068677
Job Location: KS City, MO
Duration: 6 months
Input Date: 05/25/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tanya James
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002Jr0bAAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ElectroMechanical Engr - Level 3 with active secret TX

Description:
159948
Requirement# MFC-REQ-1432
Work Location GRAND PRAIRIE, TX
Work Week 9/80-A Priority
Needed Date 08/22/2016
End Date 07/05/2018
Number of Resources 1
Security Clearance Secret

Type of Service: Engineering
Title: ElectroMechanical Engr - Level 3

Description
Lockheed Martin is seeking a Hardware Electro-Mechanical Packaging Design Engineer for a position in Grand Prairie, TX who will be responsible for missile harness design and 3D routing and general packaging support. Activity will require: Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. Research, development and design of components, equipment and networks for military applications. The engineer will be responsible for interfacing with electrical engineers in interpreting system interconnect diagram(s), harness schematics, and providing guidance for improving the layout based on best physical routing practices. The engineer will also be responsible for harness piece-part/component selection to meet interfacing hardware and environmental requirements. Clearance status required on resume.
Skill/Experience/Education
Mandatory:

- Requires 5 or more years of electro-mechanical design experience of airborne avionics, missile and/or ground-based equipment. Design experience should include electrical cable and/or network design and general electro-mechanical design. - Candidate must have experience with cabling / harness design. - The engineer must be proficient with the Pro/Cable module in Creo, have good communication skills, and be able to work with internal and external customers. The ability to work with minimal oversight.
Desired:

Knowledge of Lockheed Martin MFC (Dallas) procedures in CAD modeling and working knowledge of military and / or industry hardware specifications.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Electronic Package Design Modeling and Drafting 4-5 Years Yes
Harness Design Pro/Cable (Creo) 4-5 Years Yes



Interview Required Yes
Max Pay Rate 65.00 USD
Shift 1st Shift
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
 
Job Number: JE-1432
Job Location: Grand Prairie, TX
Rate: 65/hr max
Duration: 12 month contract
Input Date: 09/11/2017
Last Updated: 09/18/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine Control Logic Analyst

Description:
Keywords:
-Hypersonics -Control Systems -Requirements -Programming -Embedded Software -Logic

Skill Required:
Familiarity with industry standards for engine control software design (P&W SEPG-0-000, NASA NPR 7150.2A, ISO 12207, DO-178C or other industry standard).
Good technical writing skills.
Project/schedule management skills.
Requirements generation skills.
Ability to translate engine operation requirements into engine control logic flow diagrams.
Proficiency with MS Office: Word, EXCEL and Powerpoint.

Desired:
Experience/proficiency with the following tools and computing platforms is desired: Windows, Alpha/VMS, C Programming, Pictures-to-Code, Matlab/Simulink, Unigraph.
Experience with linear model generation and control loop gain sizing and stability analysis.
Familiarity with Aerojet Rocketdyne procedures (AR ENG-P-4.03.04)

Education:
B.S. or M.S. in Mechanical or Aerospace Engineering
 
Job Number: SH375839
Job Location: Jupiter, FL
Rate: 70
Duration: 2 months
Start Date: ASAP
Input Date: 09/12/2017
Firm Name: CDI CORPORATION
Attention: Stephen Harwan
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine Control Logic Analyst

Description:
Engine Control Logic Analyst

Jupiter, FL
1 year Contract
Pay Rate: $60.00-70.00/Hr

1st Shift

Duties:
Engine Control Logic Analyst to support Hypersonics program.



** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage, Sterling or Talentwise. See attachment for specific background check onboarding requirements **



Keywords:

-Hypersonics

-Control Systems

-Requirements

-Programming

-Embedded Software

-Logic

Skills:
Required:

Familiarity with industry standards for engine control software design (P&W SEPG-0-000, NASA NPR 7150.2A, ISO 12207, DO-178C or other industry standard).
Good technical writing skills.
Project/schedule management skills.
Requirements generation skills.
Ability to translate engine operation requirements into engine control logic flow diagrams.
Proficiency with MS Office: Word, EXCEL and Powerpoint.
Desired:

Experience/proficiency with the following tools and computing platforms is desired: Windows, Alpha/VMS, C Programming, Pictures-to-Code, Matlab/Simulink, Unigraph.
Experience with linear model generation and control loop gain sizing and stability analysis.
Familiarity with Aerojet Rocketdyne procedures (AR ENG-P-4.03.04)


Education:
B.S. or M.S. in Mechanical or Aerospace Engineering
 
Job Number: 7883
Job Location: Jupiter, FL
Rate: 50-70
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/12/2017
Last Updated: 11/27/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine Control Logic Analyst with active secret URGENT FL

Description:
160331/7443403

Job Title: Engine Control Logic Analyst
Keywords:
Number of Positions: 3

Remaining Positions: 3

Duties:
Engine Control Logic Analyst to support Hypersonics program.



** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage, Sterling or Talentwise. See attachment for specific background check onboarding requirements **



Keywords:

-Hypersonics

-Control Systems

-Requirements

-Programming

-Embedded Software

-Logic

Skills:
Required:

Familiarity with industry standards for engine control software design (P&W SEPG-0-000, NASA NPR 7150.2A, ISO 12207, DO-178C or other industry standard).
Good technical writing skills.
Project/schedule management skills.
Requirements generation skills.
Ability to translate engine operation requirements into engine control logic flow diagrams.
Proficiency with MS Office: Word, EXCEL and Powerpoint.
Desired:

Experience/proficiency with the following tools and computing platforms is desired: Windows, Alpha/VMS, C Programming, Pictures-to-Code, Matlab/Simulink, Unigraph.
Experience with linear model generation and control loop gain sizing and stability analysis.
Familiarity with Aerojet Rocketdyne procedures (AR ENG-P-4.03.04)


Education:
B.S. or M.S. in Mechanical or Aerospace Engineering


Skills:
Required

ENGINE CONTROLSCONTROL SYSTEMSREQUIREMENTS ANALYSISEMBEDDED SOFTWAREAEROSPACE


State/Province: Florida
City/Town: Jupiter

Start Date: 10/02/2017 Hours Per Week: 40.00
Est. End Date: 12/31/2017 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7443403
Job Location: Jupiter, FL
Rate: 70/hr max
Duration: 12 month contract
Input Date: 09/25/2017
Last Updated: 10/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Contractor/Checker

Description:
Engineering Contractor/Checker

Location: Savannah, GA
Pay Rate: $50/hr - $55/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Review 3D engineering data for conformance to Company requirements as directed.
-Check parts for fit, form and function to the extent that information is available.
-Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed.
-Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding Company drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of Company parts list & PdocM, a plus.
• Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.
• Knowledge of Excel, Share Point software, Microsoft Office a plus

Job Description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 7680
Job Location: Savannah, GA
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/25/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Specialist / Control Systems – Level III

Description:
Location: Huntsville, AL
Rate: $40.00 - $47.00/HR
Duration: 1 year contract


** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Job Overview:
Without appreciable direction, performs control system engineering assignments requiring a broad understanding of controls engineering principles and a working knowledge of other related disciplines to analyze rocket propulsion system and component performance.

Responsibilities:
60% - Use system simulation software tools including custom software applications in Matlab/Simulink and C++ computer language to evaluate control system performance. Apply advanced techniques and extension of theories, precepts, and closed loop control theory and related sciences to predict system stability and transient/steady state performance of rocket propulsion systems. Support material review boards to develop exoneration paths for non-conforming hardware used in flight systems. Plans, conducts, and directs development of software applications and a wide range of math models using several programming languages (Fortran, C/C++, VisualBasic, etc.) and other software, using advanced techniques in controls engineering to optimize propulsion systems.

30% - Support solid rocket motor development and verification testing through test setup, conduct, and data reduction. Assesses feasibility of proposed products, testing and analyses and reviews results of other team members for technical accuracy.

10% - Documents work in reports and presentations, and presents results to large diverse audiences that include customer and industry technical experts. Reviews work of peers and less experienced engineers.

Skills:
-Rocket propulsion industry technical experience preferred, especially with control systems.
-Experience with Matlab/Simulink.

Education:
-Bachelor's Degree in Electrical or Mechanical Engineering or appropriate controls related discipline/science and nine years of directly related industry experience required (or equivalent combination of education and experience).
-Advanced degree preferred.
-Coursework and experience in propulsion systems and linear/digital controls required.
 
Job Number: 7753
Job Location: Huntsville, AL
Rate: $40.00 - $47.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 08/25/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Specialist / Control Systems – Level III

Description:
Location: Sacramento, CA
Rate: $40.00 - $47.00/HR
Duration: 1 year contract


** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Job Overview:
Without appreciable direction, performs control system engineering assignments requiring a broad understanding of controls engineering principles and a working knowledge of other related disciplines to analyze rocket propulsion system and component performance.

Responsibilities:
60% - Use system simulation software tools including custom software applications in Matlab/Simulink and C++ computer language to evaluate control system performance. Apply advanced techniques and extension of theories, precepts, and closed loop control theory and related sciences to predict system stability and transient/steady state performance of rocket propulsion systems. Support material review boards to develop exoneration paths for non-conforming hardware used in flight systems. Plans, conducts, and directs development of software applications and a wide range of math models using several programming languages (Fortran, C/C++, VisualBasic, etc.) and other software, using advanced techniques in controls engineering to optimize propulsion systems.

30% - Support solid rocket motor development and verification testing through test setup, conduct, and data reduction. Assesses feasibility of proposed products, testing and analyses and reviews results of other team members for technical accuracy.

10% - Documents work in reports and presentations, and presents results to large diverse audiences that include customer and industry technical experts. Reviews work of peers and less experienced engineers.

Skills:
-Rocket propulsion industry technical experience preferred, especially with control systems.
-Experience with Matlab/Simulink.

Education:
-Bachelor's Degree in Electrical or Mechanical Engineering or appropriate controls related discipline/science and nine years of directly related industry experience required (or equivalent combination of education and experience).
-Advanced degree preferred.
-Coursework and experience in propulsion systems and linear/digital controls required.
 
Job Number: 7752
Job Location: Sacramento, CA
Rate: $40.00 - $47.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 08/25/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineers

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
This position will be in the Test and Evaluation Support unit, which has four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

The Instrumentation Engineer is responsible for supporting the operational and technical success of the instrumentation group. This person works closely with all other Instrumentation Engineers, Technicians, other T&E Support Staff to meet instrumentation requirements.

Job Duties and Responsibilities (Essential Functions):

� Provide instrumentation services: to include:
o production of instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
o Ensuring that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
o Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
� Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs. Works closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.
� Support Program Teams: Works with OEM & STC program and project managers with technical resources requirements. Fully supports the test planners in regards to their instrumentation needs.


Knowledge/Skills/Abilities:
� Intermediate knowledge skills and competency of Flight Test Instrumentation (FTI) and data equipment for the purpose of recording and monitoring parameters fitted to experimental aircraft including associated of industry processes and practices to include:
o Electrical and avionics design,
o Data Systems Design Principles
o Telemetry
o Air data booms (straight nose and swivel-head)
o Static trailing cones
o Sensitive aircraft instruments
o Cockpit displays
o End-user interface
o Portable test equipment such as hand-held stick force gauges
o High-end GPS receivers and antennas for precise aircraft positioning
o Position transducers - sting potentiometers, rotary potentiometers, LVDTs, RVDTs
o Pressure transducers
o Flowmeters
o Temperature sensors - thermocouple wire/probes/assemblies, RTD probes, thermistors, glass bulb thermometers
o Strain gauges, load cells, force transducers, torque sensors
o Portable weather stations - wind speed/direction, outside air temperature, relative humidity
o Video recording equipment
o Signal conditioners
o Data acquisition systems and data loggers
� Intermediate knowledge of flight test operations and flight certification.

Level Requirements (Minimum):
Education
� Formal Instrumentation Training (Military or Civilian) � Preferred
� BS in Engineering or equivalent experience

Experience
� 5+ years relevant technical experience
� Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.
 
Job Number: #301-Flight Test Instrumentation
Job Location: Moses Lake, WA - Washington
Rate: Open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: ASAP
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware Engineer Sr.

Description:
Hardware Engineer Sr
Moorestown, NJ
1 Year Contract
$45.00-65.00/Hr

MUST HAVE AN ACTIVE SECRET CLEARANCE

Description

Hardware engineer experienced with the selection, utilization, integration and test of COTS processors, switches and routers, VME modules and sub-assemblies. Support manufacturing build and test at component through system test levels.




Skill/Experience/Education

Mandatory:

BS Degree in Electrical Engineering or Electrical and Computer Engineering. Minimum of 6 years of professional level experience. Demonstrated experience supporting the production build and test and debug of complex commercial systems containing items such as Cisco Switches, Routers, VME based modules. Also demonstrated experience installing and rebuilding commercial operating systems such as VxWorks, Red Hawk Linux, Windows and COTS equipment proprietary operating environments. Experience in testing and debugging various military and industry standard interface types including FDDI, Fast Ethernet, Gigabit Ethernet, NTDS A/B, NTDS E, and NTDS D. Experience and proven superior performance in the use of commercial real time operating systems and development environments including Tornado / VxWorks and Concurrent Power MAX. Experience with or strong academic background in System Networking. Experience with writing Unix shell or Tera Term scripts for test automation. Hands on experience working in an integration and test environment and production environment. Knowledgeable in the use of digital and network test equipment. Experience developing and executing factory acceptance test procedures. Experience as a Network Systems Engineer with Linux based OS System Administrator skills. Willingness to perform physical tasks relating to movement of test gear, packing and carrying equipment boxes. Willing to travel occasionally for brief periods of time. And willingness to support shift work to meet test resource requirements.

Desired:

MS Degree in Electrical Engineering or Electrical and Computer Engineering.
 
Job Number: 7475
Job Location: Moorestown, NJ
Rate: 45.00-65.00/Hr
Per Diem: Possible Split
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 08/07/2017
Last Updated: 11/14/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Image Processing Algorithm Engineer

Description:
MAJOR PURPOSE
Image Processing, Image Science, Algorithm, Computer Vision, Infrared, Sensor, Target, Signal Processing
Military infrared imaging technology is advancing rapidly. This is enabling the use of novel image processing algorithms to provide new benefits to the warfighter. The Client is the industry leader in state-of-the art long range infrared sensor systems. We are seeking a motivated and talented engineer to participate with and contribute to a development team that working on advanced image processing and computer vision algorithms and implements them in real-time military and space systems. The successful candidate will combine knowledge of image processing / computer vision algorithms and real-time coding architectures to propose and develop solutions for next generation military systems. These algorithms and solutions will be used across multiple Client Technologies companies. The candidate must be a self-starter and able to handle multiple tasks in parallel, collaborating with other engineering teams across multiple Client Technologies divisions.

MAJOR FUNCTIONS
Responsibilities will include
• Research and develop advanced image processing and computer vision algorithms, such as image restoration, scene segmentation, target detection, and data fusion.
• Utilize an expertise and training in real-time coding methods, architectures and languages to implement advanced algorithms as highly optimized code in real-time processors.
• Participate in development teams that design and implement real-time image processing for military systems. Teams may span multiple Client Communications companies.
• Assist in designing image processing system architectures and evaluating image processing algorithms.
• Identify cutting-edge image processing or computer vision algorithms that can enhance new or existing imaging systems

EDUCATION/EXPERIENCE/LICENSES
Education:
• MS in Electrical Engineering / Computer Engineering / Computer Science / Physics or Mathematics with 3 years experience.
Required Experience
• Minimum 3 years industry and/or research experience developing algorithms for image/video processing, pattern recognition and computer vision applications.
• Expertise in machine learning, object detection and estimation, video fusion, image restoration and scene segmentation algorithms.
• Experience in system or computer vision modeling, simulations and algorithm performance evaluation.
• Algorithm prototyping and performance evaluation in Matlab and/or Python.
• Algorithm implementation in a high level language (C/C++/Java).
Desirable Experience
• An understanding of imaging sensors in any domain – Visible, IR, UV, X-ray, CT, Ultrasound etc.
• Experience in real-time programming, parallel and distributed computing, CUDA and VHDL.
• Experience in Visual Studio and Qt on Windows and Linux platforms.
• Experience with Altera or Xilinx development tools.
• Experience in software/firmware development life cycles.
 
Job Number: 17-782-8746
Job Location: Midwest
Rate: $70.00 to $90.00/per hour
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:
Industrial Engineer 3 (Aviation Industry) needed for a contract to direct opportunity with Yoh’s client located in St. Louis, MO
The Big Picture – Top Skills You Should Possess:

What you’ll be doing:
• Applies advanced Industrial Engineering concepts, techniques, and analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers).
• Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements.
• Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization.

Technical/Functional skills:
• Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation).
You will be responsible for:
• Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Major functions: Qualifications/Requirements:

• Bachelor Degree

What You Need to Bring to the Table:
• Excellent written and verbal communication skills
• Strong customer service skills
• Must be detail-oriented, accurate and well organized.

BONUS POINTS!
• This is a contract position with a possibility to go direct based on business needs

What’s In It For You?
• An excellent long-term Contract opportunity with the exciting aviation industry.

Get Hired, Apply Now!
Recruiter: Angela Schlipp / 314-704-4818

Yoh makes finding and applying for jobs simple. Partner with Yoh to find the right opportunities across multiple industries in the US and UK. Find out more here!
Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer, M/F/D/V. Click here to contact us if you are an individual with a disability and require accommodation in the application process.
 
Job Number: AS96655
Job Location: St. Louis, mo
Rate: 50/hr
Per Diem: NO
Overtime: possible
Duration: 6 months
Start Date: ASAP
Input Date: 09/08/2017
Firm Name: YOH SERVICES
Attention: Angela Schlipp
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:
Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Must be US Person for purposes of Export Compliance.
 
Job Number: 63134
Job Location: MO
Rate: open
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: asap
Input Date: 09/08/2017
Last Updated: 09/11/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer 3

Description:
Industrial Engineer 3

Location: Berkeley, MO
Duration: 6 months

Job Description:
Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Skill Code: D26-Mfg Industrial Engrg
 
Job Number: 17-15850
Job Location: Berkeley, MO
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: 9/29/17
Input Date: 09/11/2017
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer 3

Description:
Industrial Engineer 3

Location: New Orleans, LA
Duration: 1+ years

Job Description:
The client is seeking an experienced Industrial Engineer to join the team in New Orleans, Louisiana. This position offers an exciting opportunity to support the NASA Space Launch System Core Stage and Exploration Upper Stage production based at the NASA Michoud Assembly Facility. The Michoud Assembly Facility is the home of the production program for the Space Launch System.

The ideal candidate will have experience:
- Performing and/or developing Process Management, Process Measurement, Performance Metrics, Root Cause Analysis, Project Management, Lean Manufacturing, Manufacturing Operations (Support), Business Case Analysis, Forecasting, Resource Scheduling and Constraint Based Scheduling, Operating Plans, Supply Chain and Manufacturing
- Proficiency and experience using Microsoft Office suite including MS Project.

Candidate must be able to:
- Support a rotating shift (Rotating shifts first and/or second) are required to support production as needed.
- Interact with employees to gather data for process development and improvements. This may include observing and documenting processes, and collecting data in manufacturing areas or in assemblies during various production phases.
- This position requires the ability to walk, stand, and enter into work areas via steps or ladders as needed. Candidate may be in proximity to chemicals when observing/gathering data in an area in the factory where chemicals are in use.

The position required the use of advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods to develop optimal process designs and efficient utilization of resources in the creation and validation of products. Analyzes and designs value stream, including capability, capacity, throughput, work flow and logistics.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification.
 
Job Number: 17-09334:
Job Location: New Orleans, LA
Rate: Open
Per Diem: Yes
Duration: 12 months
Start Date: Asap
Input Date: 08/24/2017
Last Updated: 11/09/2017
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer III (LA)

Description:
SEVERAL OPENINGS

The ideal candidate will have experience:
- Performing and/or developing Process Management, Process Measurement, Performance Metrics, Root Cause Analysis,
Project Management, Lean Manufacturing, Manufacturing Operations (Support), Business Case Analysis, Forecasting,
Resource Scheduling and Constraint Based Scheduling, Operating Plans, Supply Chain and Manufacturing
- Proficiency and experience using Microsoft Office suite including MS Project.
Candidate must be able to:
- Support a rotating shift (Rotating shifts first and/or second) are required to support production as needed.
- Interact with employees to gather data for process development and improvements. This may include observing and
documenting processes, and collecting data in manufacturing areas or in assemblies during various production phases.
- This position requires the ability to walk, stand, and enter into work areas via steps or ladders as needed. Candidate may
be in proximity to chemicals when observing/gathering data in an area in the factory where chemicals are in use.

The position required the use of advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods to develop optimal process designs and efficient utilization of resources in the creation and validation of products. Analyzes and designs value stream, including capability, capacity, throughput, work flow and logistics.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification.
 
Job Number: IEIIILA
Job Location: New Orleans, LA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 10/17/2017
Last Updated: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer III (MO)

Description:
SEVERAL OPENINGS

Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Number: IEIIIMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 10/17/2017
Last Updated: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineers - HOT** Many Needed

Description:
**Must be Degreed
Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product life cycle, resulting in a robust product design and work statement that meets program requirements

Email resumes to: mmccarthy@pdstech.com
 
Job Number: BO-MO-Ind
Job Location: St. Louis, MO
Rate: $52.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 09/08/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Jr Project Manager (Contract or Direct)

Description:
Our client in the Portland, OR area is seeking a MS Project and Office365 expert in the Aerospace Industry. Looking to move quickly for the right candidate. Only JR level candidates should apply.
STC and/or Retrofit a huge plus
 
Job Location: Portland, ORE
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 1+ yrs
Start Date: ASAP
Input Date: 09/13/2017
Firm Name: AVIATION CONSULTING EXPERTS INC
Attention: Brook
Address: 13901 AVIATOR WAY
City, State: FORT WORTH, TX 76177-4308
Phone: 817/952-9193
Fax Phone: 817/231-0133
Website: www.aviationaces.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison MRB / Product Review Engineer II (FL)

Description:
INTERIM SECRET NOT REQUIRED TO START.

Applies basic Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provide summary analysis and metrics as directed by higher level employees for consultation to customers (e.g., management, departments, suppliers). Applies basic industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes as directed to enhance schedule performance, lower cost, and improve quality, through the application of Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Utilizes engineering methods (e.g., mathematical models, simulation, statistics) to assist in developing optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and supports the design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry.
 
Job Number: MRBfl
Job Location: Jacksonville, FL
Rate: up to $50/hour
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 09/26/2017
Last Updated: 11/15/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MM-System Engineering DMSMS–Grade 04

Description:
EDUCATION
BS, Electrical/Mechanical Engineering
MS, Electrical/Mechanical Engineering

Experience as design/ component engineer with semiconductor industry, an electrical component engineer with an Avionics OEM (Original Equipment Manufacturer), or as a DMSMS (Diminishing Manufacturing Sources and Material Shortages)/Obsolescence Technical Engineer.

Provide design guidance to engineering/suppliers for use of preferred parts to minimize impact from DMSMS

Review new designs and propose replacement options for both electrical and mechanical component selections based on cost, volume, DMSMS, reliability, quality and availability.
Interface with equipment manufacturers and LRU suppliers to clarify parts support, availability and recommended resolutions.

Manage component lifecycle and Bill of Material grading through DMSMS forecast tool [e.g. Silicon Expert, IHS, Q-Star, etc.] to identify, forecast, and resolve obsolete component issues.
Investigate and close DMSMS issues from engineering, production, and/or fielded parts.
Identify and analyze critical parts and recommend resolutions for proactive monitoring efforts.

Develop processes and lead working group meetings to track status and action items for a given design or manufacturing issues regarding; DMSMS, failure analysis, corrective actions, and root cause analysis.
Measure and track internal metrics to ensure DMSMS processes are being followed and implemented.
 
Job Number: 17-699-1616
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer IV - (AL) - ACTIVE SECRET CLEARANCE

Description:
ACTIVE SECRET CLEARANCE REQUIRED TO START.

The Strategic Missile & Information Systems Parts Materials & Processes (PM&P) team is a Specialty Engineering function which provides expertise in EEE, mechanical, metallic and non-metallic parts, materials and related processes as well as survivability. The PM&P subject matter experts are responsible for working with program designers, IPTs and subcontractors to select parts, materials and processes that meet program designated PM&P requirements along with supporting part testing, failure analysis and mitigation development as well as performing supplier compliance assessments and development of all required plans. Additionally, the subject matter experts will support all Parts, Materials, & Processes Control Board (PMPCB) related functions including reviewing of Non-Standard Part Approval Requests and relevant data, PMPCB working groups and board meetings and interfacing with both the customer and subcontractors in support of the PMPCB.

Field of expertise must be electrical engineering, materials science and/or engineering, physics or equivalent. Applicants must have prior knowledge of military and industry parts and materials specifications, bills of materials, obsolescence, and have coordinated activities with suppliers.

It is desired that applicants have prior experience working with defense contractors, parts, materials, & processes mission assurance plans. Some working knowledge of ionizing radiation effects and testing is also preferred.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

We also have full Medical/Dental, Life, Vision, and 401k.
 
Job Number: MP&Pal
Job Location: Huntsville, AL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 06/20/2017
Last Updated: 10/13/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintainability Engineer III

Description:
1) Maintainability Predictions in accordance with MIL-HDBK-472, and 2) Maintainability Analysis Reports to include conducting maintenance studies using MIL-HDBK-470A criteria to assess impact to Accessibility, Human Factors, Preventive Maintenance as a result of aircraft modifications. Catia skills highly desirable.

Principal Duties and Responsibilities
1. Coordinate and conduct maintenance program development activities in support of the scheduled maintenance program for existing or future aircraft programs maintenance tasks, maintenance skills, manning and documentation procedures, including off-sight presentations/meetings.
2. Evaluate fleet data to determine the feasibility of incorporating mechanical, materials, and/or procedural advancements that improve aircraft availability or the technicians ability to perform scheduled or corrective maintenance.
3. Evaluate methods that lead to the reduction of expended task man-hours and needed support equipment to affect maximum aircraft availability with minimum maintenance resources.
4. Utilize departmental, company, and industry resources to the maximum in developing maintenance practices for aircraft.
5. Coordinate the evaluation of current maintenance practices or suggestions to determine their feasibility/practicality for application to the fleet. Present Maintenance Program changes to the Customer based boards for review, acceptance and application to fleet inspection schedules.
6. Maintain liaison with maintainability/logistics groups, within the aircraft and aerospace industry, to stay abreast of new developments, component designs, and processes that may be applicable to maintainability functions and directly benefit scheduled maintenance programs.
7. Must independently exercise self-policing practices to ensure timely, effective follow-through and close-out of assigned tasks. Inform cognizant individuals of obstacles that hinder a successful conclusion.
8. Coordinate and lead major project activities. Review work of team members for technical and grammatical accuracy.
9. Perform dispatch reliability and aircraft availability information review and calculations.
10. Represent Maintainability Engineering in dealing with Regulatory bodies and officials.

Other Requirements:
1. Knowledge of aircraft inspection programs, Federal Aviation Regulations, aircraft systems and technical manuals including maintenance record systems required.
2. Proficient knowledge of MSG-3 Maintenance Program Development process.

Experience/Education Required
Bachelors degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience. A&P license preferred.

Seven years of related aircraft maintenance and operational experience required or equivalent aircraft experience.
 
Job Number: 24-186
Job Location: Savannah, GA
Rate: $62 to $67/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 11/07/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Our client seeking a 1st Shift Manufacturing Engineer to work on a contractual basis evaluating products and processes. The successful candidate will interface among designers, process improvement teams, quality control, field engineers, and production personnel.

Principal Duties and Responsibilities:

• Conduct projects and studies involving process or product improvements, process control and the analysis of technical problems with limited supervision and guidance.
• Evaluate the manufacturability of parts and assemblies and suggest improvements.
• Develop and document production and assembly processes and test procedures.
• Provide training and technical support to hourly personnel for new processes.
• Analyze and refine existing processes that do not consistently yield acceptable results.
• Analyze discrepant parts or units as required to determine whether a process problem exists.
• May participate on various teams for design review, configuration control, process improvement, etc., as assigned.
• Estimate production or rework labor for parts or assemblies.
• Performs all operations according to prescribed safety principles.
• All other related duties as assigned.

Required Qualifications:
• Bachelor of Science in Mechanical, Manufacturing, or Aeronautical Engineering, or a related discipline.
• 2+ years’ manufacturing/production engineering experience.
• Ability to conduct root-cause problem analysis and to develop appropriate corrective and preventive action.
• Ability to make independent judgments on technical issues.
• Ability to lift 25 lbs. occasionally, and work in an office, lab, shop floor, and indoor industrial environment.

Desired Qualifications:
• Familiarity with common aerospace sheet-metal fabrication and assembly processes.
• Working knowledge of Geometric Dimensioning & Tolerance.
• Practical experience with blueprint reading.
 
Job Location: Davenport, IA
Rate: Open
Per Diem: Yes, Split
Overtime: Possible
Duration: 6-12 Months
Start Date: ASAP
Input Date: 09/13/2017
Firm Name: AMERICAN CONTRACT GROUP
Attention: Derek Doucette
Address: 50 HIGH ST STE 46
City, State: NORTH ANDOVER, MA 01845
Phone: 978/984-5581
800 Phone: 877/723-9087
Fax Phone: 978/208-8246
Website: www.americancontractgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer 3 (Aviation Industry) needed for a contract to direct opportunity with Yoh’s client located in Philadelphia, PA

The Big Picture – Top Skills You Should Possess:

What you’ll be doing:

Develops and implements production and tooling methodologies.
Participates on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines.
Develops, identifies and implements conceptual designs and maintains the program architecture for build.
Leads and implements manufacturing plans.
Technical/Functional skills:

Analyzes design/build concepts to evaluate producible design/build definitions.
Resolves technical problems of significant impact to performance, cost or schedule. Coordinates and implements new engineering principles, theories, advanced technologies and concepts.
Validates and ensures production readiness of solutions to complex problems. Implements lean principles and technologies
You will be responsible for:

Conducts producibility and variation analyses to ensure that manufacturing process capability matches requirements.
Assists in providing producibility information for inclusion in project plans and helps document producibility best practices.
Major functions: Qualifications/Requirements:

Bachelor Degree
What You Need to Bring to the Table:

Excellent written and verbal communication skills
Strong customer service skills
Must be detail-oriented, accurate and well organized.
BONUS POINTS!

This is a contract position with a possibility to go direct based on business needs
What’s In It For You?

An excellent long-term Contract opportunity with the exciting aviation industry.
Get Hired, Apply Now!

Recruiter: Angela Schlipp / 314-704-4818

Yoh makes finding and applying for jobs simple. Partner with Yoh to find the right opportunities across multiple industries in the US and UK. Find out more here!

Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer, M/F/D/V. Click here to contact us if you are an individual with a disability and require accommodation in the application process.
 
Job Number: AS96507
Job Location: Philadelphia, PA
Rate: 50/hr
Per Diem: NO
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: YOH SERVICES
Attention: Angela Schlipp
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer with active secret / extensive SAP experience CA

Description:
159848
Requirement #AERO-REQ-0604
Work location Palmdale, CA
Work Week 9/80-A
Priority High
Needed Date 07/14/2017
End Date 08/10/2018
Number of Resources 1
Security Clearance Secret

Title: Manufacturing Engineer
Description
Candidate will work in a manufacturing environment and work cross-functionally with operations team to support Manufacturing Execution System (MES) ERP4C. Candidate will work with core support team to troubleshoot, design and develop requirements for the MES system. Candidate will work trouble tickets, participate in design reviews and work with core IT/One Aero team on the development of new capabilities for MES system. Will be responsible for identifying system issues and making recommendations for corrections. Must have a thorough understanding of manufacturing process and procedures including fabrication, assembly and coatings in several disciplines including composites, metallics, machining, bonded assemblies, and installations. Must have previous experience in a manufacturing environment working cross functionally with other disciplines including industrial engineering, planning, scheduling and production planning. A thorough understanding of engineering blueprints, process specifications and facility lay-outs is required. Previous experience with lean manufacturing and process improvements is required.

Skill/Experience/Education
Mandatory:

Active Secret Clearance with investigations within the past 5 years.

SAP Superuser; Subject Matter Expert in SAP Bill of Materials & Production System Development. Enterprise Resource Planning (ERP) and Material Requirements Planning (MRP), System Deployment and System Development . Ability to work extended work hours to meet project schedule requirements.
Desired:

Masters degree from an accredited college in a related discipline. Understanding of LM Palmdale company policies, procedures and systems including SAP, One-Aero, ERP4C. Airframe and Systems Integration experience Working knowledge of aerospace organizations including: Planning, Quality, Prod Control, ERP, IT. Quality, etc. Certified Manufacturing Engineer, Greenbelt, Blackbelt or Lean Certification Independent creative thinking and problem solving

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Manufacturing Engineering Mfg. Eng. level 2 or 3 6-8 Years Yes


Interview Required Yes
OT Allowed Yes (#hours allowed: 15, Pre-Approval Reqd.:No)
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 45.00 USD
5-8 Yrs Pay Rate: 55.00 USD
9+ Yrs Pay Rate: 65.00 USD
 
Job Number: JE-0604
Job Location: Palmdale, CA
Rate: 45-65/hr DOE
Duration: 12 month contract
Input Date: 09/14/2017
Last Updated: 09/25/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Marketing Analyst

Description:
Our Client: Intl Freight Forwarder and Supply Chain
Seeking:

Marketing Analyst
Permanent position Salary range: $45k-$65k

Providing Support to Corporate Sales and Marketing to this International Freight Forwarding / 3PL/ Supply Chain Company

Responsibilities
Qualifications
Ideal Candidate will have Marketing Experience and Knowledge of International Freight Forwarding / Logistic Services

Products: Air/Ocean Import, Air/Ocean Export/ Customs Brokerage/ Domestic/Warehousing/Distribution/Supply Chain

JOB SUMMARY:

Support Corporate Sales & Marketing (including Director of Marketing and Global HQ in Taipei) in delivering initiatives required to help achieve company goals. This role will be key in helping us standardize our approach to RFI completions, promotional and collateral resource fulfillment, sales team support (research, sales deck support, etc.), web copy and industry newsletters, and the various needs of sales people around the world. The ideal candidate would maintain great attention to detail, be able to produce high quality written English, have in-depth knowledge of our industry, and uphold a high level of professionalism.


DUTIES AND RESPONSIBILITIES:

1. RFI completion complete RFIs for large opportunities, reaching out and balancing the input of global stakeholders and synthesizing the content in a concise, professional document; develop library of RFI responses for future use.

2 Marketing Resource Fulfilment work with regions to source and fulfil internal orders for marketing promotional and printed collateral materials. Develop streamlined process balancing cost and required on-site dates.

3. General Sales Team Support support business development via market or client-specific research for large clients and opportunities; work with sales to develop targeted sales decks for clients. Manage marketing resources on company intranet.

4. Support External Branding Make necessary updates to website copy and compile a company newsletter for clients in cooperation with product and regional team leaders; shepherd the translation process to ensure quality and fluid process.

5. Agency Partner Coordination support Marketing Director in project management tasks associated with Client's marketing agency including budgeting, timelines/milestone management, invoicing/payment, etc.

6. Support product directors or other executives in the company with special project assignment needs



Bachelors degree, highly desired
Client will consider a recent college grad with 1-3 marketing experience, With interest in the Global Logistics Industry.

Job Requirements:
Salary DOE
Full medical and 401k
 
Job Number: 159135
Job Location: El Segundo, CA
Rate: $24 to $28.00 DOE
Duration: Perm
Input Date: 10/07/2016
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Lisa Roll
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lroll@chiptonross.com
Website: www.chiptonross.com

Mechanical 2D and 3D Engineering Checker

Description:
Mechanical 2D and 3D Engineering Checker
Savannah, GA
Rate: $55-$63

Unique Skills:

Required Check 2D engineering data and 3D models for conformance to Company requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of GAC parts list & PdocM, a plus. Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Other duties as assigned.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7821
Job Location: Savannah, GA
Rate: $55-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 07/18/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Sustaining Engineer - hydraulic

Description:
Johnson Service Group (JSG) is searching for a Mechanical Sustaining Engineer, capable of providing technical guidance to assure the performance of hydraulic actuation components currently in service on commercial and military aircraft.

Summary of Job Scopes:

3-6+ years of related mechanical sustaining engineering experience, ideally with hydraulic actuators and hydraulic control valves, or similar products for the Aerospace Commercial and and Defense industries.
Requires mechanical engineering expertise with hydraulic control valves and hydraulic actuators.
Working knowledge of gears is a plus.
A qualified candidate will interface with the Quality Assurance and After-Market Organizations to support the investigation of field failures or internal proposed changes.
Responsible for interfacing with design and analysis engineering organizations to implement proposed design changes.
Requires working knowledge and understanding of requirements verification processes to assure the successful implementation of any proposed design changes.
Responsible for assuring the existence of artifacts that document the verification of any proposed design changes.
Position requires a working knowledge of data configuration management and change control process.
Responsible for interfacing with configuration management organization to assure the release and control of relevant configuration data.
Requires working knowledge of aerospace standards, i.e. relevant SAE ARP, FAA regulations & guidance, military standards, etc.
Working knowledge of ATA 2000 is a plus.
Responsible for determining the effort (hours) and the duration (time) required to generate all technical support for the sustaining activities.
May carry out complex or novel research assignments requiring the development of new or improved techniques and procedures.
May promote and implement process improvements company-wide.
May write product standards and design guidelines.
Education:

Bachelor's Degree in Mechanical Engineering or a similar technical discipline
Type of employment: Contract with potential for long term

Location: Duarte, CA
 
Job Number: 359944
Job Location: Duarte, CA
Rate: $45-$48hr
Per Diem: no
Overtime: possible
Duration: 12 months
Start Date: asap
Input Date: 08/15/2017
Last Updated: 09/26/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Model Based Systems Engineering (MBSE) Technical Specialist

Description:
Location: Canoga Park, CA
Rate: DOE
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
-The successful candidate will have experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
-Knowledge of Jazz Team Server (JTS) enterprise management is useful.
-An intermediate level of practice as a SysML Model User and Builder is desired.
-Understanding of how these applications are deployed and used in the aerospace industry is preferred.
-Rocket engine or propulsion system domain knowledge is desirable.
-The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.

Skills:
Required:
-Experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
-An intermediate level of practice as a SysML Model User and Builder is desired.
-The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.

Desired:
-Knowledge of Jazz Team Server (JTS) enterprise management is useful.
-Understanding of how these applications are deployed and used in the aerospace industry is preferred.
-Rocket engine or propulsion system domain knowledge is desirable.

Education:
-BS or MS in Engineering, Computer Science or related field is required.
-MS in Systems Engineering is desirable.
 
Job Number: 7755
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 08/11/2017
Last Updated: 11/14/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Model Based Systems Engineering (MBSE) Technical Specialist URGENT CA

Description:
160120/7326500
Canoga Park, CA
70/hr max
6 months

Model Based Systems Engineering (MBSE) Technical Specialist

Remaining Positions: 1

Duties: ** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

-The successful candidate will have experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
-Knowledge of Jazz Team Server (JTS) enterprise management is useful.
-An intermediate level of practice as a SysML Model User and Builder is desired.
-Understanding of how these applications are deployed and used in the aerospace industry is preferred.
-Rocket engine or propulsion system domain knowledge is desirable.
-The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.
Skills: Required:
-Experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
-An intermediate level of practice as a SysML Model User and Builder is desired.
-The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.

Desired:
-Knowledge of Jazz Team Server (JTS) enterprise management is useful.
-Understanding of how these applications are deployed and used in the aerospace industry is preferred.
-Rocket engine or propulsion system domain knowledge is desirable.
Education: -BS or MS in Engineering, Computer Science or related field is required.

-MS in Systems Engineering is desirable.



Skills: Required
• MBSE
• IBM RATIONAL SOFTWARE
• DOORS SOFTWARE

State/Province: California
City/Town: Canoga Park

Start Date: 09/04/2017 Hours Per Week: 40.00
Est. End Date: 03/04/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7326500
Job Location: Canoga Park, CA
Rate: 70/hr max
Duration: 6 month contract
Input Date: 10/11/2017
Last Updated: 11/29/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX 3D Wire Harness Routing

Description:
Job Title: NX 3D Wire Harness Routing
Location: Portland, OR 97217
Duration: 12+ Months

JOB FUNCTIONS
• Design and develop vehicle components and systems using Siemens NX CAD..
• Coordinate and execute the packaging development and documentation for all Mechatronics owned electrical /electronic devices and their mounting systems.
• Create and maintain detailed part and assembly drawings.
• Assist with selection of proper materials, tolerances, finishes, fasteners and production methods.
• Analyze and provide creative, technically sound solutions to problems encountered in validation and production.
• Apply Client and industry drafting and design standards, including GD&T.

BASIC QUALIFICATIONS
• Mechanical or Electrical Engineering degree or related engineering degree preferred but not required.
• Siemens NX CAD experience preferred.
• CHS Capital Harness experience preferred.
• Previous electrical and electronics packaging experience preferred.
• A general knowledge of automotive systems preferred.
• Excellent verbal and written communication skills, as well as personal computer office automation skills are required.
 
Job Number: 3312
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 09/05/2017
Firm Name: OLSA RESOURCES INC
Attention: Sarabjit Saxena
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

Ocean Import Agent

Description:
Our Client is a Mid-sized Int'l Freight Forwarder

Seeking: OCEAN IMPORT AGENT
Location: Lake Success, NY
Salary is $45K-$50K- DOE

Understand the processes, documentation, and terminology involved in international shipping from time of purchase order issuance through the delivery of the cargo.
Knowledge of delivery orders process, create docs, select carrier for delivery. Knowledge of Docs needed for Customs Clearance.
Apply industry knowledge and critical-thinking to adapt processes/create solutions in response to challenges both internally and externally
Execute/Coordinate tasks on the shipments to meet all customer SOP requirements: processing pre-alerts, delivery of freight, governmental filings, etc.
Ensure a high-level of data integrity within the shipments: acknowledgement of shipment details, INCOterms, routing, dates, documents, etc.
Facilitate Relationships
Communicate clearly, timely, and effectively with Customers, Company offices and Outside Vendors
Promote a positive working relationship for all team members
Ensure customer SOPs are maintained and adhered to.
Monitor customer shipment trends and its impact to our processes and operations
Perform other duties and projects not reflected on this list, as assigned
Required Qualifications:
Excellent customer service skills to be utilized with customers and the network
Strong communication, prioritization, and multi-tasking skills
Critical-thinking, flexibility, and problem-solving skills to adapt to ever-changing tasks and customer needs
High level of attention to detail

Job Requirements:
Education and/or Experience

Associate's degree or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. 4 year degree a plus.

Experience dealing large volume of data entry.

Company offers full medical benefits and 401k



 
Job Number: 158338
Job Location: Lake Success, NY
Rate: $22 to $24.00 DOE
Duration: Perm
Input Date: 10/07/2016
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Lisa Roll
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lroll@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Procurement Engineer - Level 3

Description:
Procurement Engineer - Level 3

Location: Tampa, FL
Pay Rate: DOE ($25/hr - $45/hr)
Duration: 6 month contract
Shift: First, 5/40
Travel: Yes; Lackland AFB San Antonio, TX
***MUST have an ACTIVE SECRET CLEARANCE***

Description
-Coordinates with Subcontract Management Team, Procurement Engineering Management, Systems Engineering, the Suppliers (CAE USA) and Industry experts to facilitate the design, production, test and qualification of aerospace and defense products.
-Analyzes technical data, designs, preliminary specifications, manufacturing limitations, supplier facilities, and parts/equipment availability.
-Investigates and recommends potential suppliers based on assessments of response to specifications, costs, inspection of facilities, and historical performance.
-Facilitate technical trade-offs and standardization that may lead to more economical procurement.
-Recommends design changes or process improvement to mitigate production issues.
-Leads teams of Supplier and internal staff in collaboratively solving problems in Producibility, Quality, Inspection, Cost, Mistake-Proofing, Test, Reliability and Affordability while based in supplier facility and customer site.
-Provides technical solutions to a wide range of difficult problems.
-Solutions are imaginative, thorough, and practicable, and consistent with organization objectives.
-Works under general direction only and independently determines and develops approach to solutions.
-Work is reviewed upon completion for adequacy in meeting objectives.
-Reports directly to the Lead Procurement Engineer on the C-5 program.
-Provides surveillance and Quality Assurance direction to supplier while supporting the program needs.
-Experience with requirements management and flowdown to supplier.
-Reviews and approves Supplier Statements of Work (SSOW), technical specification, and supplier deliverables (SDRLs).
-Onsite Quality Assurance representative on program assuring data trend analysis, lean practices, process improvement, operating procedure compliance, quality control, supplier surveillance, containment activity, supporting TKOs/RBATs/PACs, continuous improvement, configuration management, and root cause analysis following AS9100, ISO9001, ASQ, and CMMI.

Skill/Experience/Education (MANDATORY):

-Quality Assurance (4-5+ years experience)
-Supplier Quality Assurance (4-5+ years experience)
-Hardware Engineering (4-5+ years experience)
-Test Verification/Validation (4-5+ years experience)
-Configuration Management (4-5+ years experience)
-ISO 9001: 2008 training (required)
-AS9100C training (required)
-Lockheed Martin Procure 2 Pay (P2P) training (required)
-Auditor training (required)
-Engineering or Technical 4-year Degree
-Process Improvement
-Purchase Orders
-Physical and Software Configuration Audits
-Source Inspections
-QMS
-Risk Assessment
-ASQ
-Corrective Action and Prevention
-Reliability
-Logistics
-Excel


Desired:
-Subcontracts Management (0-3+ years experience)
-Systems Engineering [aircraft avionics systems] (0-3+ years experience)
-Green Belt/Black Belt Certification
 
Job Number: 7345
Job Location: Tampa, FL
Rate: 25-45
Per Diem: Split Possible
Overtime: Yes
Duration: 6 mos
Start Date: ASAP
Input Date: 04/19/2017
Last Updated: 11/14/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Planning & Scheduling Analyst I

Description:
Program Planning & Scheduling Analyst I
Savannah, GA
Long Term Contract
$30.00/Hr

Unique Skills:
Experienced with Aircraft Maintenance Scheduling: Scheduled Maintenance, Modification Period Scheduling, Flying Schedule, Flying Schedule effectiveness and Time Change component scheduling.

Education and Experience Requirements:
Bachelors Degree in Industrial Engineering, Business Administration, or related curriculum, or an equivalent combination of education and experience to successfully perform the essential functions of the job. Two (2) years formal scheduling experience. Requires proven experience with PC based software such as MS Excel, Project, Access, Word and Power Point. Experience with resource loaded plans desired.

Position Purpose:
Under general supervision gathers given information, organizes and produces schedules, program plans, financial and resource plans, and other duties needed to support assigned programs. Responsible for supporting the team with resource loaded plans and forecast analysis as required.

Principal Duties and Responsibilities:

Essential Functions: 1. Produce resource loaded schedules and/or financial operations of assigned programs with gathered activities, hours, and budget. 2. Produce recovery plans as requested using given information. 3. Utilize tools provided for collecting and maintaining program analysis and detail level data. 4. Prepare status reports and forecasts for assigned programs. 5. Responsible for preparing and maintaining schedules at all levels in support of assigned projects/programs.

Additional Functions: 1. Perform other duties as assigned.
Languages Required (in addition to English): English
 
Job Number: 7074
Job Location: Savannah, GA
Rate: 30.00
Per Diem: $110/Weekly, Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/16/2017
Last Updated: 10/23/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
The Electronics Division of Client is an established pioneer in space exploration and military/defense technology. A leader in high technology and engineering services, the Client is world renowned for its expertise in the areas of infrared detection and space & missile electronics. As a first-rank engineering and production company, the client is engaged in the design, development, and manufacture of highly-sophisticated electronics equipment that is used in a variety of product areas for government, civil and commercial applications.

DESCRIPTION
Broad range of experience needed to join Test Engineering team. As a member of this team, you will manage and direct design engineers, test engineers, and technicians to develop test sets to test Spacecraft, Launch Vehicle, and Infrared Imaging products.
This will entail managing the technical effort as well as the schedule, Budgets and work assignments as needed to support development efforts. This candidate must understand, generate, and optimize the requirements for test development. Project engineering, IPT leadership, or management experience will be an asset in this position. Knowledge of instrument control, test and measurement system development as well as test equipment configuration is desirable. Experience developing with programming languages such as Labview and TestStand will be useful.
 
Job Number: 17-780-9285
Job Location: Midwest
Rate: $40.00/per hour
Per Diem: No
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager

Description:
2 Positions Available.

•Responsibility for managing and delivering projects or work package/s with limited complexity to cost, schedule and technical performance.
•Definition and execution of the project management plan, to include responsibility matrix and cost and resource plans
•Tracking schedule, cost and resources
•Ensure that all required resources such as engineering, manpower, production, computer time, facilities, etc., are available for the project.
•Conducting formal cost and schedule variance analysis and development of any recovery plans required to eliminate schedule or cost variances.
•Participate/lead Program Reviews, Integrated Baseline Reviews (IBRs) and other project or management reviews.
•Coordinate the development, implementation and production cycle of new or modified products.
•Manage the efforts, cost, and schedule for engineering design and development, and for its integration into manufacturing.

Required Qualifications:
•Bachelor’s degree in Engineering, Business Administration, or related field.
•Minimum 2 years' project management. (Aerospace Industry Strongly Preferred)
•Demonstrated ability to interpret contracts, develop and administer budgets, and monitor programs including schedules and risk-control.
•Ability to plan and implement detailed projects and to create project overviews.
•Skilled in detail oriented work, but capable of seeing the big picture.
•Able to independently prioritize daily activities and meet department objectives.
•Demonstrated delegation capabilities and ability to lead Integrated Product Teams (IPT).
•Excellent writing skills, including the ability to read, write, and understand technical and financial proposals and reports.
•Capable of expressing ideas clearly and communicating effectively with employees at all levels in the organization, including the ability to prepare and make technical presentations to customers, vendors, small groups of mid- and top-level managers, and other stakeholders.
•Proficient with Microsoft Office PRO including Project and Visio, as well as databases, spreadsheets, etc.
•Able to travel internationally.
 
Job Number: 52260
Job Location: IA
Duration: 6-12Months
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer

Description:
The Quality Engineer plans and directs activities concerned with development, application and maintenance of quality standards for industrial processes, materials and products by performing the following duties.

Job Responsibilities:
• The Quality Engineer performs professional Quality Engineering assignments of a basic degree of complexity under direction and supervision with limited latitude for independent action and decision.
• Work involves the application of basic engineering principles to develop methods and procedures to improve and maintain product quality standards.
• Assignments include the design of systems of recording and analyzing product quality level; the development of quality control inspection requirements and techniques, and the interpretation of product quality trends.
• May prepare plans, specifications and cost estimates for assignments of moderate difficulty where technical supervision provides an outline of tasks to be performed and suggestions as to methods of approach and procedures to be followed.
• Conducts analysis of tests of a routine degree of complexity and provides recommendations accordingly.
• May assign work to inspectors and technicians.
• Performs other related duties as required.

Minimum Requirements:
• Bachelor's degree (B.A.) from four-year college or university; and one to two years related experience and/or training; or equivalent combination of education and experience.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/20/2017
Last Updated: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer II

Description:
Essential Functions and Key Responsibilities:

•Develops solutions to problems of moderate scope and complexity requiring judgment and ingenuity working within established standards and procedures relative to planning and directing activities concerned with development, application, and maintenance of quality standards for industrial processes, materials, and products.
•Management applies general direction to the results expected and reviews completed work for soundness and accuracy.
•Conducts analytical studies on simple to moderately complex engineering proposals to develop and initiate standards and methods for inspection, testing, and evaluation.
•Analyzes research data and proposed product specifications to determine feasibility of product proposal.
•Confers with research personnel to clarify or resolve problems.
•Devises sampling procedures, designs and develops forms and instructions for recording, evaluating, and reporting quality and reliability data.
•Establishes programs to evaluate precision and accuracy of production equipment and testing, measurement, and analytical equipment and facilities.
•Develops and implements methods and procedures for disposition of discrepant material and devises methods to assess cost and responsibility.
•May perform on site quality audits of vendors for initial qualification, maintaining vendor qualification and quality problem resolution.
•Directs workers engaged in measuring and testing product and tabulating data concerning materials, product, or process quality and reliability.
•Compiles and writes training material and conducts training sessions on quality control activities.
•This position may provide administrative and technical leadership over other Stakeholders in the department.
QUALIFICATIONS:
Bachelor's degree (B. A.) from four-year college or university and three (3) to six (6) years related experience and/or training; or equivalent combination of education and experience. MRB experience preferred.
 
Job Number: 13757
Job Location: Tulsa, OK
Rate: $35
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/13/2017
Firm Name: APA SERVICES
Attention: Lisa Adams
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer II-MRO

Description:
Summary Statement: Applies advanced knowledge of principles, theories, concepts and industry practices and standards in the area of planning and directing activities concerned with development, application, and maintenance of quality standards for industrial processes, materials, and products.

Essential Functions and Key Responsibilities:
•Develops solutions to problems of moderate scope and complexity requiring judgment and ingenuity working within established standards and procedures relative to planning and directing activities concerned with development, application, and maintenance of quality standards for industrial processes, materials, and products. Management applies general direction to the results expected and reviews completed work for soundness and accuracy.
•Conducts analytical studies on simple to moderately complex engineering proposals to develop and initiate standards and methods for inspection, testing, and evaluation.
•Analyzes research data and proposed product specifications to determine feasibility of product proposal.
•Confers with research personnel to clarify or resolve problems.
•Devises sampling procedures, designs and develops forms and instructions for recording, evaluating, and reporting quality and reliability data.
•Establishes programs to evaluate precision and accuracy of production equipment and testing, measurement, and analytical equipment and facilities.
•Develops and implements methods and procedures for disposition of discrepant material and devises methods to assess cost and responsibility.
•May perform on site quality audits of vendors for initial qualification, maintaining vendor qualification and quality problem resolution.
•Directs workers engaged in measuring and testing product and tabulating data concerning materials, product, or process quality and reliability.
•Compiles and writes training material and conducts training sessions on quality control activities. T
•his position may provide administrative and technical leadership over other Stakeholders in the department.

JOB QUALIFICATIONS: Bachelor's degree (B. A.) from four-year college or university and three (3) to six (6) years related experience in an MRO environment
 
Job Number: QEIIMRO
Job Location: Tulsa, OK
Rate: $35
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/11/2017
Firm Name: APA SERVICES
Attention: Lisa Adams
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer(aerospace)

Description:
Role: Quality Engineer

Location; Cincinnati, OH



Requirements:
•Bachelor’s Degree in engineering, quality, or equivalent training and experience, preferably in the aerospace industry.
•Minimum of 3 years as Quality Engineer II or equivalent experience.
•In depth knowledge of NDT processes and familiarity with the following: welding; heat treating of aerospace alloys; non-destructive testing; shot peening; coordinate measuring machines; inspection methods; and measuring and test equipment.
•Proficient in the use of personal computers, blueprint reading, geometric tolerances, and application of SPC to part characteristics.
•Good interpersonal and communication skills, problem solving skills, and understanding of aerospace requirements.
•Must attend training and earn DQR, DSQR, and/or other customer certifications as required in order to release manufactured parts for shipment.



Physical Requirements:

Normal working environment – standing, sitting, walking – typically inside a building. Occasional stooping, twisting, lifting, bending, and carrying. Minimal or no exposure to excessive noise, dirt, chemicals, extreme temperatures, or hazardous conditions. Continual use of computers
 
Job Number: 52290
Job Location: Cincinnati, OH
Input Date: 09/11/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bala
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
R&D Engineers - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring R&D Engineers for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Analyze proposal product, equipment, customer specifications and process requirements to conceive and produce a practical mechanical design within the limitations defined by mechanical design leaders
• Assist design leaders in producing sub-assemblies by integration predetermined purchased components with manufactured details
• Produce design release packages in preparation for submission to project management
• Provide support to manufacturing to clarify design issues
• Other responsibilities and duties as assigned by management
• Has the authority and obligation to stop production in case unsafe working conditions are observed
• Has the obligation to notify the Director IO and the President for Safety related matters requiring immediate attention

Qualifications:

• University degree in engineering or college diploma in mechanical engineering technology or equivalent experience
• Three to Five (3-5) years’ experience in mechanical design
• Design experience should include familiarity with industrial washers and automation
• Design experience must include knowledge of fabrication and machining principles
• Good communication skills
• The ability to work in a team atmosphere

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40029
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/07/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Recruiters - McLean, VA

Description:
STS AeroStaff Services is hiring Recruiters in McLean, Virginia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Our client is looking for a full-life cycle recruiter to support their mission systems sector. The successful candidate should have experience in a high-volume, fast paced environment with demonstrated experience sourcing, screening, qualifying, interviewing and candidate relationship management while guiding hiring managers and candidates through the selection process. A successful candidate must be able manage competing demands; accept constructive feedback, while being extremely adaptable and flexible to changing business requirements. This recruiter will support a broad customer base in a highly technical environment and will handle sensitive and confidential information.

A successful candidate must be able to demonstrate a wide degree of creativity, near and long-term recruiting strategies, proficiency with online tools, personal organization and the ability to function independently in a high-volume, fast paced environment.

Candidate should have previous experience with server-based applicant tracking systems, project management, written & oral communication skills, demonstrated ability to command the attention and respect of leadership, ability to create and manage strategic alliances with customers.

Job Duties:

• Must demonstrate solid judgment, the ability to quickly learn systems, processes, and procedures
• Must be able to quickly assimilate technical information, build solutions and operate with financial responsibility
• Knowledge in all full-life cycle recruiting including, but not limited to sourcing, screening, qualifying, interviewing, comp analysis and formulating offers
• Experience with relationship management while guiding hiring managers and candidates through the selection process
• Position requires a demonstrated ability to recruit for a broad/deep range of technical positions and handle sensitive and confidential information appropriately
• The successful candidate must be able to maintain excellent customer service with hiring managers, candidates and maintain a partnership with HR Business Leaders
• Ability to function independently in a high-volume fast paced environment
• Demonstrated ability to command the attention and respect of leadership, ability to create and manage strategic alliances and drive the process
• A successful candidate must demonstrate solid judgment, the ability to quickly learn systems, processes and procedures
• Must be able to quickly assimilate technical information and operate with financial responsibility
• Should have a strong understanding of OFCCP process compliance
• Position can be located in McLean, VA or Fairfax, VA
• Occasional travel may be required

Minimum Qualifications:

• Bachelor’s Degree and 6 years’ related experience or an equivalent combination of education & experience; 10 years’ total experience without degree
• Demonstrated success in a corporate recruiting environment or agency recruiting firm
• Experience with server-based applicant tracking systems, ideally TALEO
• Technical industry knowledge with the ability to understand relevant skills, target companies and user groups
• Demonstrated success in a full-life cycle technical staffing role
• Demonstrated ability as an active social media recruiting user
• Ability to obtain an Interim Secret clearance

Preferred Qualifications:

• Background in agency recruiting, ability to demonstrate effective client management and interpersonal communication skills
• Ability to demonstrate research and sourcing strategies for hard to fill positions
• Ability to demonstrate effective ways to build talent pipelines and tactical research
• Knowledge of alternative search techniques to find and engage passive candidates
• Excellent written and verbal communication skills

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40068
Job Location: McLean, VA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/13/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer 4

Description:
REQUIRED EXPERIENCE:
Bachelor's degree in a technical field such as Electrical Engineering, Probability/Statistics, Mathematics, or related disciplines and a minimum of 9 years' relevant experience (7 years with a Master's degree).
Candidate is expected to have an understanding of technical principles, theories, subsystem design, and knowledge of general satellite design.
Ability to perform various reliability related tasks including: providing reliability support to the design team through the performance of design tradeoffs, reliability failure rate/MTBF predictions, de-rating analysis, allocation of reliability requirements, performing failure modes and effects analysis (FMEA) and identify fault modes and responses, identify critical items and document controls, and support to design reviews.
Candidate has a familiarity with functional block diagrams, reliability block diagrams, and ability to interpret schematics.
Candidate must show an understanding of how a unit functions independently as well as interacts with other units.
Candidate must be able to develop technical solutions to potential reliability and availability problems.
Applicant must be able to adapt probability and statistical tools to solve problems involving non-standard configurations and definitions of system success; knowledge of industry tools used to conduct Reliability analysis.
Individual must have the ability to prepare and present briefings to senior leadership and external customers, excellent interpersonal and communication skills and have experience with modeling and simulations, and software analysis tools used in Reliability analysis.
Must be proficient with Microsoft tools.
Preferred Qualifications:
14 Years with Bachelors in Science; 12 Years with Masters; 9 Years with PhD.
Reliability experience in a Space related program.

EDUCATION:
Bachelor's degree in a technical field such as Electrical Engineering, Probability/Statistics, Mathematics, or related disciplines, OR 7 Master's degree is required.

HOURS:
9/80 workweek

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
Candidates responding to this posting must currently possess the eligibility to work in the United States. No third parties please.
 
Job Number: 165215
Job Location: Redondo Beach, CA
Duration: 1 Year
Start Date: ASAP
Input Date: 09/13/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Mechanical Designers - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring Senior Mechanical Designers for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

To develop engineered solutions using an established CAD system from concept through 3-D design and 2-D detailing of tooling for the manufacturing sector in automotive (body-in-white and powertrain), aerospace, construction and forestry industries. To coordinate design and engineering communications and closely work with proposal and estimating, project management, purchasing, manufacturing operations, quality, field service, aftermarket sales and documentation departments.

Job Duties:

• Construct and modify CAD models per customer CAD standards using one or more of the following systems: Catia, Unigrahics, FIDES, AutoCad, Inventor, and Solidworks
• Estimate design hours for tool concept to design and release for original content as well as changes
• Prepare layout and detail drawings of design as required to project timelines
• Develop creative and innovative engineered solutions that meet or exceed customer requirements
• Review and study customer specifications, engineering schematics and other data in order to determine the design procedures needed to generate and release digital and/or hardcopy printouts related to the engineering and manufacturing requirements
• Perform necessary engineering calculations and proper material selection to satisfy the required design functionality
• Coordinate any structural and/or finite element analysis that need to be performed for assessing the functionality of the tools designed
• Coordinate the development of part drawings, including CAD drawings, through other designers, internal or outsourced, to comprehensively manage the complete design of the tools that are assigned
• Meet and review design details and function with customer engineer and designer per Quality Stage Gate requirements as stipulated by customer for design reviews
• Work effectively to project budgets and timelines, with constant awareness to design within the project budget constraints
• Work closely with customer engineer and/or designer on design changes to improve manufacturability, maintainability and serviceability of equipment
• Verify the completeness and the accuracy of the CAD model and data before final release of the drawings for purchasing or fabrication and before final storage of the data for future retrieval, with significant prior expertise and experience in checking detail drawings for the manufacturing tooling industry
• Be knowledgeable of the release systems and procedures, and release all the necessary detail drawings in digital and/or hardcopy formats per established requirements of the internal and external customers (for example release to purchasing for make/buy decision, input for controls design and engineering, and documents to support field installation and service personnel, direct digital transfers to customer systems)
• Possess general awareness of Geometric Dimensioning and Tolerancing (GD&T) concepts and its application in manufacturing and assembly sectors in automotive, aerospace, construction and forestry industries
• Be knowledgeable about the FMEA, 8-D and structural analysis (FEA) performed on the tools and/or the process stations using the tool(s) assigned. Initiate ideas and coordinate efforts for continuous improvement of product/tool and process

Qualifications:

• A Bachelor of Applied Science or Mechanical Engineering degree or equivalent from a recognized University is preferred or an Associate Degree/Engineering Diploma, preferably with a specialization in design and drafting, from a recognized Community College or equivalent experience as assessed by the Hiring Manager
• Specialized training with certifications where applicable from recognized training organizations, in the use of CAD systems and software, such Catia, Unigrahics, FIDES, AutoCad, Inventor, Solidwork
• A minimum of 10 years of direct experience and demonstrated capabilities in concepting, 3-D designing and 2-d detailing by consistently using one or more of the above mentioned CAD systems for the design of manufacturing and assembly tooling, which include geo, respot, end-of-arm tooling, etc.
• Experience in one or more of the following industries is a must – automotive, aerospace, construction and forestry vehicles/equipment manufacturing industries
• In the automotive manufacturing industry, specific experience focused in any one or more of the following areas is highly recommended: body-in-white welding and assembly, closure hanging, powertrain manufacturing and assembly (including machining and assembly automation, material handling systems, component washers, leak-testers, functional testing machines), final assembly, or material handling in manufacturing plants
• Leadership abilities in coordinating design related tasks among peers, Junior Designer inside the Company or from engineering design outsource agencies and holding them accountable to deliver on time per the project timeline and ensuring quality of CAD data
• Ability to effectively prioritize and execute tasks in a high pressure environment including following on tool s during the fabrication, build installation and commissioning phases of the project
• Ability and willingness to travel to any of the customer and Company’s work locations in North America, Europe and Asia, as required by Management
• Must be willing to work extended hours, when necessary, including overtime, weekends and holidays and on night shift, as project and customer demands dictate
• Excellent interpersonal, written and verbal communication skills
• Ability to work with others, including peers and personnel in other departments
• Eligibility for clearance under the Canadian Controlled Goods and the American ITAR requirements

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39986
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Technical Writers - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring Senior Technical Writers for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Prepare written text describing the operation, maintenance, calibration and/or repair of Welding and Assembly systems and related equipment
• Construct and/or edit 2D(line) and 3D(solid) illustrations from native CAD models, ”.jt” files, photographs, and other equipment supplier references
• Prepare Spare Parts Lists from mechanical and controls bills-of-material (BOMs), OEM catalog references, and other published data sources
• Develop, edit and maintain various industrial placards (ECPL, Lubrication, Maintenance, etc.,) single point / one point lessons, work instructions, job aids
• Create illustrations, charts, graphs, slides, etc., using Microsoft PowerPoint to support Sales, Engineering, Estimating and Training proposals and presentations
• Develop project “Buy-Off” manuals: prepare content-specific check sheets, inspection reports, OEM equipment signoff statements and other customer defined templates
• Shoot, enhance and edit digital photographs of equipment and products
• Edit raw digital video files rendering them as 30fps “still frame” animations for use in engineering reports

Qualifications:

• A 4-year degree in English, communication arts, illustration, digital publishing, graphic design, language arts or technical writing is strongly preferred
• Equivalent experience in the practical maintenance of manufacturing equipment and/or industrial controls may be considered. (Minimum of Associate Degree is also required)
• Minimum of 7 years of experience in automotive industry with a focus on tooling and with increasing responsibilities, including leadership roles is required
• 5 years of publication / illustration experience
• Development of Operator and/or Skilled Trades training material
• Proficient in MS Office 2010 applications, Adobe Creative Cloud applications (Photoshop, etc.)Adobe Premiere Elements
• Proficient in the use of AutoCAD (2D)
• Familiarity with manufacturing process of suppliers and customers (welding, riveting, structural joining, etc.) is helpful
• Work with subject matter experts who will provide knowledge transfer to enable appropriate course content and lab scenarios with functional results
• Strong organizational skills, note taking, writing and verbal skills
• Ability to work independently, and handle stress in a fast paced, multi-task oriented atmosphere

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39987
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation & Software Engineer

Description:
Simulation & Software Engineer
Savannah, GA
Long Term Contract
$58.00-63.00/Hr

Unique Skills:
1. Matlab/Simulink experience modeling real time aircraft systems
2. Aerospace background with avionics lab testing experience
3. Ability to understand aircraft electrical wiring diagrams as it relates to HIL simulation
4. Experience with high level programming or scripting language such as C/C++, Python
5. Knowledge of data protocols used in aerospace
6. Experience modeling aircraft systems in real time on industry standard simulation platforms (eg NI, Speedgoat, Dspace,ADI)
7. Flight and/or aircraft system lab HIL simulation experience
8. Ability to work independently and self-govern priorities in accordance with lab customer needs

Job Description
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7079
Job Location: Savannah, GA
Rate: 58.00-63.00/Hr
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/22/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Electrical Engineer II - Clearance / ability to obtain and retain a Secret security Clearance AZ TX AL

Description:
160219/7317190

Sr Electrical Engineer II - Clearance (7317190)
- Huntsville, Tucson or McKinney
Must be able to obtain secret clearance

Senior Designer or Electrical Engineer to contribute
to the design, analysis, simulation, test, and
integration of digital electronic modules and/or CCAs
for Missile applications. The Senior Electrical
Engineer must be experienced in all aspects of circuit
card design from concept through delivery to higher
level assemblies as evidenced by multiple successful
design completions (including hardware designs with
processors, FPGAs, memory, and industry interfaces,such as PCIe, Ethernet, I2C, UART). This position
will function in multi-disciplined design teams across
multiple projects. This person will be the
Responsible Engineering Authority (REA) for
development of one or more complex modules, CCAs
or units and will be expected to apply rigorous and
systematic design processes to ensure total design
compliance. This position will interface with
Integrated Product Team Leads (IPTL) and stake
holders to ensure program objectives are achieved.
The position requires frequent use and application of
technical standards, principles, concepts and
techniques. Candidates will be expected to provide
solutions to a variety of technical problems of
moderate scope and complexity, working under
general supervision. Successful candidate should
expect to be immersed in a fast-paced, team-based,
and challenging technical environment where an
individual with talent and initiative can stand out and thrive.

Required Skills: • U.S Citizenship required The ability to obtain and retain a Secret security Clearance • Minimum of 6 years Engineering design experience, with at least 2 years in a senior position • A self-motivated and effective communicator • Ability to prioritize work of others and handle multiple tasks at a time • Experience in the development and design of electronic circuit designs, multi-assembly system/unit design, processor designs a plus • Proven ability to take a design concept from the block diagram or requirements level and develop a complete hardware design, and verifying via test and integration • Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution. • Experience with embedded test techniques, design for test, design margin analysis and design for production • A strong advocate for process improvement • Experience in managing schedule and resources to meet assigned milestones • Capable of functioning in multi-disciplined design teams across multiple projects Desired Skills: • Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES) • Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB) • Experience with intellectual property generation (patents & publications) • Team and project leadership skills • Knowledge of software and/or FPGA code development • Experience leading a program transition from development to production • Demonstrated ability to manage technical and schedule risks and to identify cost reduction opportunities • Knowledgeable in cost/schedule development and management Required Education (including Major): Bachelor’s Degree in Electrical Engineering (MS preferred) or similar degree and meets the experience
 
Job Number: MB-7317190
Job Location: Huntsville, Tucson or McKinney, AL, AZ, TX
Rate: DOE
Duration: 6-12 month contract
Input Date: 09/18/2017
Last Updated: 09/29/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stock Clerks - Palmdale, CA

Description:
STS AeroStaff Services is hiring Stock Clerks in Palmdale, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Performs a combination of manual and clerical duties to receive, store, and issue equipment, materials, and supplies in a central warehouse
• Examines stock to verify conformance to specifications and invoices
• Stores articles according to identifying factors
• Fills orders or issues supplies from stock
• Requisitions stock to fill incoming orders; and prepares stock use reports
• Determines methods or places for storage considering guidelines for temperature, humidity, weight or height limits, turnover, floor loading capacity, and required space
• Exclude shipping and/or receiving clerks

Basic Qualifications:

• High School Diploma plus 0 years of experience
• Reach Lift and Forklift certified
• Ability to frequently move and position objects weighing up to 40lbs.
• Familiar with Office Suite

Preferred Qualifications:

• Experience with SAP software
• Industry experience

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40077
Job Location: Palmdale, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/27/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Stress Engineer 3 (Aviation Industry) needed for a contract to direct opportunity with Yoh’s client located in Charleston, SC
The Big Picture – Top Skills You Should Possess:
What you’ll be doing:
• Develops, integrates and documents structural requirements to establish the system design.
• Coordinates with other engineering groups to establish the product’s environment.
• Guides product design and verifies structural integrity by using analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance.
Technical/Functional skills:
• Develops test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications.
• Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied.
You will be responsible for:
• Supports in-service products by investigating failures and analyzing improvements. Works under general direction.
Major functions: Qualifications/Requirements:

• Bachelor Degree

What You Need to Bring to the Table:
• Excellent written and verbal communication skills
• Strong customer service skills
• Must be detail-oriented, accurate and well organized.
BONUS POINTS!
• This is a contract position with a possibility to go direct based on business needs
What’s In It For You?
• An excellent long-term Contract opportunity with the exciting aviation industry.
Get Hired, Apply Now!
Recruiter: Angela Schlipp / 314-704-4818
Yoh makes finding and applying for jobs simple. Partner with Yoh to find the right opportunities across multiple industries in the US and UK. Find out more here!
Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer, M/F/D/V. Click here to contact us if you are an individual with a disability and require accommodation in the application process.
 
Job Number: AS27186
Job Location: Charleston, SC
Rate: open
Per Diem: NO
Overtime: possible
Duration: 3 months
Start Date: ASAP
Input Date: 09/12/2017
Firm Name: YOH SERVICES
Attention: Angela Schlipp
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Bachelor's Degree (B.S) in Mechanical, Aerospace, or Civil Engineering

Position requires in-depth knowledge of Engineering Mechanics and Strength of Materials.
•Good leadership and communication skills.
•Minimum of 5 years in cabin or cargo compartment stress analysis.
•Experience in static (FE and free-body), fatigue and transient analysis, Nastran, Patran, MathCad.
•Familiar with FAA/EASA Aircraft regulatory requirements.
•Able to utilize Microsoft Excel, Word, PowerPoint and Project PC tools
review all current openings at www.hi-tecsolutions.com/jobs
 
Job Number: 632066
Job Location: Mobile, AL
Rate: 60-70
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: asap
Input Date: 09/19/2017
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: 2501 E PIEDMONT RD STE 103
City, State: MARIETTA, GA 30062-7753
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

Stress Engineer

Description:
PDS Tech is seeking a Stress Engineer in St. Louis, MO

Email resumes to: gsachez@pdsech.com or call 314-264-3135 to discuss. 

  • The Stress (Analysis) Engineer will develop, analyze, design and establish test procedures for aero-structure products and airframe structure for a variety of internal and external customers
  • Design and analyze details of mechanically fastened and bonded joints for both composite and metallic airframe structures.
  • Support the design and development of 3D CATIA datasets and/or 2D drawings
  • Integrate technical, cost, value, and safety considerations into the product definition to comply with customer, regulatory and company requirements and document results in drawings, datasets, reports specifications and supporting data
  • Interface with other members of project or program team, management and manufacturing staff to develop producible products that reduce process times, rework, and scrap
  • Interface with customers and suppliers to achieve cost effective, technically sound and functionally superior product.

Basic Qualifications:



  • Bachelor’s degree in Engineering from an ABET accredited program.
  • 8+ years metals and/or composite analysis experience in an aero-structure design/manufacturing environment.
  • Strong computer skills with knowledge of Microsoft Office products.   Experience with CATIA V4/V5 a plus.
  • Experience with FEM (Finite Element Method) packages which includes Nastran / Patran and /or other packages such as ANSYS.   
  • Experience with hand calculations and template use/applications
  • Willingness to travel in support of the development effort


Preferred Qualifications:



  • Composites and Metallic experience 
  • Patran or Nastran 
  • Previous Large Aircraft or Fighter Jet experience is a plus. 

Required: 

  • Must have active Secret Clearance,investigation within the last 5 years. 
  • Must be a US citizen able to hold secret level security clearance. 
  • Bachelor’s degree in Engineering from an ABET accredited program.

PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries.  Several large programs are on the horizon in the St. Louis, MO area. These highly compensated positions will move quickly.  Please connect with us now for immediate consideration when  these positions arrive.  Apply to this posting, or contact Gus Sanchez at 314-264-3135 or gsanchez@pdstech.com for more information.
 
Job Number: 1610051297
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 06/14/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydeRAAQ&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.

Email resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss. 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • Must have active secret clearance or active within the last 2 years
  • Composite experience 

Email resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss. 
 
Job Number: 1610051299
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 06/07/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydebAAA&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051188
Job Location: Warner Robins, GA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLzAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051182
Job Location: El Segundo, CA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLVAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051180
Job Location: Fort Worth, TX
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLLAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051187
Job Location: Greenville, TX
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLuAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051184
Job Location: San Diego, CA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLfAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US.
 Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051186
Job Location: CO Springs, CO
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLpAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051189
Job Location: Marietta, GA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydM4AAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051185
Job Location: Denver, CO
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLkAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051178
Job Location: Huntsville, AL
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLBAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required. 
  • Composite experience 

 
Job Number: 1610051183
Job Location: Palmdale, CA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLaAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051181
Job Location: Grand Prairie, TX
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLQAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051152
Job Location: Houston, TX
Duration: 12 months
Input Date: 06/09/2016
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydHEAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610050801
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 06/01/2016
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ybKsAAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer (secret clearance)

Description:
Structural Design Engineer

Secret Clearance Required: active with 5 year refresh/update
Location: St Louis, MO
Duration: long term contract
Rate; up to $75/hr
Multiple openings


Job Purpose
Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components. Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers).
• Develop design data for aircraft structural components, systems components, assemblies and installations.
• Complete assignments within scheduled milestones.
• Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
• Mentor associate structural engineers.
• Actively works to improve daily processes.
• Maintains a current knowledge of developments in aircraft structures.
• Participates in projects to improve productivity and financial performance.
• Perform other job duties as assigned.

Qualifications
• Bachelor’s Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience.
• Minimum 8 years engineering experience.
• Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000).
• Experience with Team Center & Enovia is a plus.
• Attention to detail of completed designs is critical. Ability to work with cross functional teams required.
• Proficient at producing high quality designs within schedule and budget.
• Must be able to work in team environment.
• Must be able to work overtime and weekends as required.
Required:
• Must have active secret clearance or active within the last 2 years
• Composite experience
The Structures Company LLC is an AA/EOE.
 
Job Location: St. Louis, MO
Rate: up to $75/hr
Per Diem: yes
Overtime: possible
Duration: 12+ month
Start Date: asap
Input Date: 09/13/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structure & Payload Design Engineer

Description:
Structure & Payload Design Engineer (Aviation Industry) needed for a contract to direct opportunity with Yoh’s client located in St. Louis, MO

The Big Picture – Top Skills You Should Possess:

What you’ll be doing:
• Develops, integrates and documents structural and interior payload system requirements to establish the system design.
• Develops, maintains and modifies structural and interior payload system and component designs, using 3-D Computer Aided
• Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle.

Technical/Functional skills:
• Experience with Unigraphics (NX8) and Teamcenter 8.

You will be responsible for:
• Performs, integrates analytical and test results to validate and verify systems and components meet requirements and specifications.
• Develops new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort.
• Works under general direction

Major functions: Qualifications/Requirements:

• Bachelor Degree

What You Need to Bring to the Table:
• Excellent written and verbal communication skills
• Strong customer service skills
• Must be detail-oriented, accurate and well organized.

BONUS POINTS!
• This is a contract position with a possibility to go direct based on business needs

What’s In It For You?
• An excellent long-term Contract opportunity with the exciting aviation industry.

Get Hired, Apply Now!
Recruiter: Angela Schlipp / 314-704-4818

Yoh makes finding and applying for jobs simple. Partner with Yoh to find the right opportunities across multiple industries in the US and UK. Find out more here!
Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer, M/F/D/V. Click here to contact us if you are an individual with a disability and require accommodation in the application process.
 
Job Number: AS27151
Job Location: St. Louis, mo
Rate: 55/hr
Per Diem: NO
Overtime: possible
Duration: 4 months
Start Date: ASAP
Input Date: 09/08/2017
Firm Name: YOH SERVICES
Attention: Angela Schlipp
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supply Chain Procurement (KS)

Description:
Conducts, manages and maintains synchronization of a supply chain for obtaining goods and services for the company. Interfaces with internal and external customers and suppliers. Acts as an authorized agent of the company with responsibility for managing all supplier-related activities and authority to commit company resources through contracts and agreements. Manages inventory levels, simulation, modeling forecasting data, and supplier performance. Monitors customer inventory demand and material assets to optimize total supply chain planning. Incorporates planning decisions from customers and suppliers to reduce material and product variability, and arrive at optimal solutions. Develops requests for quotations and proposals, analyzes supplier responses, negotiates and awards contracts, and manages post award supplier activities. Interfaces with internal and external customers and suppliers. Ability to analyze internal and external systems that create demand for products to validate requirements (e.g., customer inventory demand, supplier parts availability and material assets that are on hand or in transit) and to determine the proper course of action (e.g., release orders/maintain schedules against existing contracts to internal and external suppliers for procured items) to satisfy requirements. Apply knowledge of suppler management and procurement process in development and execution of contracts/agreements for obtaining goods and services. Knowledge of industry standards, supplier capabilities, product configuration, manufacturing processes, and governmental regulations relating to procurement.

Requirements:
Not a typical Buyer position. Hiring Manager is looking for candidates with extensive Project/Program Management experience. Candidates that possess critical thinking skills demonstrated through their work history (problem solvers).  

Manager looking for fresh candidates so please do not submit candidates previously submitted to Client Supply Chain requisitions

Level 3

Ed / Exper
Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience- 

First Shift 
Local Candidates Only - no per diem

Looking for a highly skilled and trained candidate.
Excel experience (V-look-up, charts, etc).
Powerpoint - prepare and present 
Extensive SAP experience
Buying/procurement industry experience. Strong Supplier communication and interfacing.

FOSTER DESIGN'S BENEFITS:
• Working for a 53-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-543610KS
Job Location: Wichita, KS
Rate: $40.00/HR
Per Diem: No - Local Talent Only
Overtime: Yes
Duration: 4 Months
Start Date: 09/08/2017
Input Date: 08/30/2017
Last Updated: 09/14/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sustaining Design Engineer

Description:
Skills / Experience

• BSME or related experience
• Must be able to present technical information and conduct equipment maintenance
• Must have Analysis, Design Skills, Stress Analysis, Technical Writing and Strong GD&T skills
• Proficiency in MSOffice
• Proficiency in Computer Aided Design - Pro-E / Creo (Preferred) or CATIA V5 – 2000 hrs minimum
• Personal integrity willing to make decisions and stand by that decision
• Technical skills to research and write technical reports
• Evaluates and can read and interpret mechanical blue prints applying geometric tolerances
• Thorough understanding of how to apply strength of materials, static and dynamics relating to gearboxes and actuators
• Understands how to conduct tolerance study on mechanical actuators and gearboxes
• Self-starter with mechanical skills relating to gear driven equipment
• 5 years’ experience in MRB (Material Review Board) dispositions in the Aerospace industry
• Knowledge of aerospace specifications such as MIL standards, AMS, NAS, NASM and how and where to apply
• Understands Gear terminology AGMA, ANSI and other related gear and spline standards and knowledge

Benefits:
Relocation Bonus
Immediate Health Benefits
401k
Tuition Reimbursement
Stock Purchase
 
Job Location: Park City, UT
Input Date: 10/03/2017
Firm Name: APA SERVICES
Attention: Kami M Muehlberger
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer ( EE Parts Engineer)

Description:
Looking for systems engineer ( EEE Parts Engineer) who can review and disposition Government Industry Data Exchange Program (GIDEP) Reports

•Demonstrated experience applying EEE knowledge to assess the aircraft design

Desired skills
•Experience with new aircraft design and development
•Experience providing oversight to aircraft suppliers
•Experience with military or government aircraft programs
*Windchill
*GIDEP


Windchill is a plus
 
Job Location: CO
Input Date: 09/13/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Candace
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TH-AVIONICS-Grade 07

Description:
Seeking a candidate for a Commercial Avionics Systems Engineer to be an integral part of a small and fast-paced team supporting the engineering projects, product development, and test.
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
Airframes may include, but are not limited to S-76, S-92 and their derivatives, including integration of new technologies into the S-92.

PRIMARY RESPONSIBILITIES
1. Development of requirements
2. System Integration
3. Generation of lab and aircraft test procedures
4. Troubleshooting avionics issues on test, production and fielded aircraft
5. Support program management reviews

BENEFICIAL EXPERIENCE
- FAA and foreign certification (preferred)
- DO-178B, DO-160 and DO-254 processes (preferred)
- Technical project management (preferred)
- Supplier technical management (preferred)
- Pilot or A&P experience (preferred)

EDUCATIONAL REQUIREMENTS
- BS Engineering in a related field w/7+ years relevant professional experience
- Will consider non-degreed candidates who have equivalent professional experience (11+ years)
 
Job Number: 17-703-1551
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Design Certification Eng Contractor - Special Missions

Description:
UNIQUE SKILLS
This position provides technical and project oversight of projects for TC design changes and STCs to clients’ stream's certified aircraft. The chosen candidate will serve as a liaison between the company and FAA/ODA, engineering focal and other Civil Aviation Authorities. Qualified Candidates: - Must be detail oriented and thorough - Strong technical expertise in Special Missions Certification Project STCs is highly desirable - Must demonstrate strong technical writing skills of certification documentation - Must be experienced in establishing Certification project plans and leading projects to closure - Have ability to handle multiple cert projects simultaneously - Be a good team player - Certification projects experience in Special Missions projects and STCs is highly desirable

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yr. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-774-110261
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Design Certification Engineer - Special Missions

Description:
Technical Design Certification Engineer - Special Missions

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-This position provides technical and project oversight of projects for TC design changes and STCs to Company's certified aircraft.
-The chosen candidate will serve as a liaison between the company and FAA/ODA, engineering focal and other Civil Aviation Authorities.

Qualified Candidates:
- Must be detail oriented and thorough
- Strong technical expertise in Special Missions Certification Project STCs is highly desirable
- Must demonstrate strong technical writing skills of certification documentation
- Must be experienced in establishing Certification project plans and leading projects to closure
- Have ability to handle multiple cert projects simultaneously
- Be a good team player
- Certification projects experience in Special Missions projects and STCs is highly desirable

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7736
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/09/2017
Last Updated: 10/30/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer II - Wire Installation Design (FL)

Description:
SEVERAL OPENINGS IN FT. WALTON BEACH, FL.

Maintains releases and assists in developing electrical/mechanical drawings, systems designs or engineering documentation and data, by applying Company, industry and governmental standards. Using design tools, prepares documentation and incorporates basic design changes. Creates, develops and maintains elementary systems designs. Supports engineering system design and functionality validation activities. Supports the development and maintenance of moderately-complex product installation designs and part designs. Supports coordination with internal partners and external suppliers. CATIA V5

AA Degree or higher
 
Job Number: TechDesFL
Job Location: Ft. Walton Beach, FL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 08/14/2017
Last Updated: 09/15/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Recruiter

Description:
Job Description:
We are looking to hire an experienced or non-experienced Recruiter who is motivated and can work their desk with minimal supervision. The right candidate may also be given the opportunity to transition in to sales / account management.

Our office is located on Route 44 (exit 6 off 495) on the Lakeville / Middleboro line and our office hours are 9:00 to 5:00 Monday thru Friday. I pasted the job description below for you to review; if you are interested in hearing more about the opportunity then please respond to this email with an updated Word formatted resume. If you are not interested, please forward this to a friend or colleague who you think may be interested. We are looking to fill these two openings as soon as possible so please respond in a timely manner. Please note my contact information is below; thank you for your time and I look forward to hearing from you.

Experience Level:
Unspecified

Requirements:
Responsible for sourcing, recruiting, and screening applicants for a variety of technical positions, including but not limited to, engineers, designers, analysts, assembler technicians and all other modalities across all industries.

Primary responsibilities:
> Source, interview/phone screen and select applicants for technical positions.
> Meet with sales/account managers to determine job descriptions and open requisitions.
> Match applicants to job openings / requisitions.
> Source for future job openings, possible clients and job market information or tips.
> List job postings on job boards, social media, corporate career web sites, and other possible channels.
> View applications.
> Call applicants and perform phone screens.
> Instruct applicants on the nature of the job and whom they will be speaking with during the interview.
> Participate in final selection of applicant.
> Create portfolio of possible candidates.
> Check references.
> Inform candidate of company's decision.
> Inform applicants not chosen of company's decision.
> Keep track of potential candidates

Core Competencies:
> Oral and Written Communication
> Team Player
> Shows Initiative
> Good Organization skills
> General housekeeping in responsibility, maintaining an organized & professional work area
> Excellent written and verbal communication skills

Education / Experience:
> 1-3+ years experience working in an office setting
> Experience working the phones (cold calling, incoming calls, etc.)

Mark A Ludwig
Vice President of Sales
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 - 6180
Toll Free: (800) 510 - 8050 x123
Fax: (508) 923 - 0005
www.globalamericanstaffing.com
 
Job Number: Recruit_2017
Job Location: Lakeville, MA
Rate: DOE
Per Diem: N/A
Overtime: N/A
Duration: Perm Hire
Start Date: ASAP
Input Date: 03/01/2018
Last Updated: 03/07/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Telemetry and Data Operator

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry. This is an opportunity to work on a cutting edge flight test program!

We are seeking Telemetry and Data Operators to join the team in Moses Lake, WA.

Knowledge and Responsibilities:

Operate and maintain telemetry, data processing, and video systems in support of flight test data collection
Assist in the preparation and check-out of telemetry systems, conduct telemetry operations, and process data post flight.
Flight test experience is strongly desired
Candidate will have knowledge of the operation of tracking antennas and telemetry receivers as well as all standard lab equipment used for the maintenance and troubleshooting of telemetry systems and subsystems
Candidate must be proficient in the use of data servers and computer peripherals for the purpose of data downloading, processing, managing, backup, and recovery of data
 
Job Location: Moses Lake, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Start Date: Now
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer

Description:
Tool Designer 3 (Aviation Industry) needed for a contract to direct opportunity with Yoh’s client located in Helena, MT

The Big Picture – Top Skills You Should Possess:

What you’ll be doing:

Investigates, develops and verifies accuracy of tooling concepts and tooling definitions.
Researches tool designs to create and revise tool usage instructions.
Prepares tool design or fabrication off load packages.
Technical/Functional skills:

Develops, documents and maintains complex tool inspection and maintenance requirements.
Participates in multi-functional product design reviews to support manufacturing/tooling plan.
Works under general direction.
You will be responsible for:

Provides engineering design disposition on tool discrepancies to identify solutions.
Major functions: Qualifications/Requirements:



Bachelor Degree
What You Need to Bring to the Table:

Excellent written and verbal communication skills
Strong customer service skills
Must be detail-oriented, accurate and well organized.
BONUS POINTS!

This is a contract position with a possibility to go direct based on business needs
What’s In It For You?

An excellent long-term Contract opportunity with the exciting aviation industry.
Get Hired, Apply Now!

Recruiter: Angela Schlipp / 314-704-4818

Yoh makes finding and applying for jobs simple. Partner with Yoh to find the right opportunities across multiple industries in the US and UK. Find out more here!

Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer, M/F/D/V. Click here to contact us if you are an individual with a di