Job Search Results

757 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/12/13 Thursday 08:18AM Pacific Time by ContractJobHunter. )

Listings 1 - 757

Go To My Job Tracker

Expand all descriptions

- FAA Technician - Electronic - Level 2

Description:
PDS Tech, Inc. is hiring a FAA Technician in Renton, WA.

Summary:
  • FAA POSITION Constructs, maintains, and tests electrical systems and components.
  • Uses measuring and diagnostic tools to test and modify electronic parts.
  • Ensures systems and components meet established specifications.
  • A certain degree of creativity and latitude is required.
  • Typically reports to a supervisor or manager.

High School diploma or GED equivalent 

• 3 months of relevant Aerospace electronic experience 

• Must be U.S. Citizen to support specific government programs and projects 



Additional Qualifications: 

• Display and/or Radio Frequency experience. 

• Associates Degree in a technical discipline such as electronics, electro-mechanical, or related area or Equivalent 

• Military training. 
  •  

 
Job Number: 1810094264
Job Location: Renton, WA
Duration: 6 months
Input Date: 10/19/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qwIkQAI&URLSource=cjhunter

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 12/19/2016
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2504 - LIAISON ENGINEER (MRB)-2504 - cv, word doc only

Description:
Disposition documentation to resolve fit, form or functional issues on A/C components.

Support to Production, Design Engineering, Procurement & Quality in coordinating resolutions to issues.

Review & trouble shooting of A/C Systems in conjunction with design Engineering as required.

Review & disposition of A/C Wiring & Electrical issues in conjunction with Design Engineering as required.

Corrective Action requests involving Engineering as required.

Obtain & Interface with Design Engineering experts on appropriate issue resolution.

Interpret engineering drawings, specs & provide guidance to junior employees.

Provide status, updates & keep current on information regarding manufacturing changes & problems.

Job is located in Toronto and is for weekend afternoon shift coverage

Bachelor or Masters degree in Aeronautical or Mechanical Engineering from an accredited University.

Minimum of ten years MRB experience or design experience in Aerospace

Possess good knowledge of aircraft structure & system installation technical requirements, aircraft materials and hardware, standards and specifications

Electrical & Systems experience as this would be considered an asset

Person with excellent communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment

Have previous CATIA, Design and MRB experience including support to production would be considered an asset.

Have previous experience as a Mentor and Coach in either Liaison team environment or working with problem solving teams is an asset

Are flexible with work schedule as this position requires weekend work on a rotating schedule and some travel and short-term relocation assignments, and it work day is Weekend-Afternoon Shift .
 
Job Number: 2504
Job Location: Toronto, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/28/2018
Last Updated: 12/05/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

A&P Mechanic

Description:
PDS Tech Inc. is seeking an Aircraft Mechanic, in Saint Augustine, FL.

Summary:
  • Performs a combination of responsibilities consisting of complex mechanical duties in all fields of specialization for the flight line, including power plant, run-in plumbing, hydraulics, rigging, and controls, and structures and surfaces on the complete airplane. 
  • Performs mechanical and operational duties for pre-flight and post-flight service and inspection and/or in preparation of customer acceptance of completed airplanes. 
  • Performs operations such as disassembling, repairing, replacing, rechecking, testing, re-rigging, servicing, and re-installing as necessary. 
  • Operates aircraft power plants and ground equipment during acceptance checks, trouble shooting and routine maintenance of aircraft. 
  • May troubleshoot malfunctions/defects and schedule/modify maintenance procedures. 
  • Maintain practical knowledge of certified aircraft and ground support systems such as controls, fuel, hydraulic, pneumatic, electronic, fire control and armament components.

Basic Qualifications: 
  • High School Diploma/GED plus 4 years of Aircraft Mechanic 3 experience.

Preferred Qualifications: 

  • E2C or E2D aircraft experience.


POC: Clyde (813) 426-9917 or ccallwood@pdstech.com
 
Job Number: 1810090415
Job Location: Saint Augustine, FL
Duration: 0 months
Input Date: 10/23/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mk7pAAA&URLSource=cjhunter

A&P Mechanics

Description:
We have an urgent need for contract Aerospace Mechanics here in Moses Lake, WA. This is a very high paying position. The position also has opportunities to become full time.

Job Duties and Responsibilities

Service, repair, troubleshoot and modify aircraft and aircraft engines.
Repair, replace and rebuild aircraft structures, system and functional components.
Assemble and install electrical, plumbing, mechanical, hydraulic, structural components and accessories using hand tools and power tools.
Adjust, align and calibrate aircraft systems using hand tools, gauges and test equipment, machines and equipment such as shears, sheet metal brakes, welding equipment, pneumatic tools.
Research and understand FAA technical data relevant to assigned tasks.
Maintain the premises in a clean and organized manner.
Remove and/or install aircraft components, test IAW MM, and troubleshoot aircraft systems.


Requirements
Knowledge/Skills/Abilities

Strong knowledge in FAA regulations, Aviation Rules (FOD’s, Safety, Quality, Hazardous Materials, Aircraft Marshalling), aerodynamics, aircraft electrical systems, materials science, aircraft maintenance, electrical testing, instrumentation, gas turbine and piston power plants.
Good leadership (individual contributor) presence:
Able to lead by example and live/work by company values.
Ability to successfully contribute to a positive and productive work environment.
Able to instill a sense of urgency in team members.
Able to be patient and objective in difficult situations with different types of people.
Good customer service tool box:
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong follow-through, quick thinking and resourceful.
Ability to remain calm, cool and collected in stressful situations.
Strong sense of urgency to address and solve important issues.
Good organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Ability to work in a progressive, fast-paced environment (work well under pressure).
Good analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Good communication skills (oral, written) with customers.
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Good interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office, including Word, Excel, Outlook, and PowerPoint.
Education

Associate’s Degree (or Technical School equivalent) in Aircraft Maintenance or related field from an FAA accredited school.
A&P Certificate.
Japanese Bilingual preferred.
Experience

Three (3) plus years of aircraft mechanical experience preferred.
 
Job Location: Moses Lake, WA
Input Date: 10/29/2018
Last Updated: 12/04/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: mcalderon@velocity-cs.com
Website: www.velocity-cs.com

AIRFRAME & POWERPLANT TECHNICIAN

Description:
Johnson Service Group is currently seeking a Airframe & Power Plant Technician to work for our client.

Adjusts, aligns, and calibrates aircraft systems, using hand tools, gauges, and test equipment.
Examines and inspects engines or other components for cracks, breaks or leaks.
Disassembles and inspects parts for wear, warping, or other defects.
Assembles and installs electrical, plumbing, mechanical, hydraulic and structural components and accessories using hand tools and power tools.
Services and maintains aircraft systems by performing tasks, such as flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.
Repairs, replaces and rebuilds aircraft structures, functional components, and parts, such as wings and fuselage, rigging and hydraulic units.
Reads and interprets manufacturers and airline’s maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components
Tests engine operating, using testing equipment to locate source of malfunction.
Minimum Education, Licensure, or Certification (or Substitute Experience) Required:

Airframe and Power plant License Required, high school diploma or equivalent required.
Basic knowledge of operating a personal computer or laptop.
Knowledge of job-specific machines and tools, including their designs, uses, repair, and maintenance.
Capable of repairing machines or systems using the needed tools
Ability to determine the kind of tools and equipment needed to do a job
Able to perform routine maintenance on equipment and determine when and what kind of maintenance is needed.
Capable of determining causes of operating errors and deciding what to do about it.
Able to perform tests and inspections of products, services or processes to evaluate quality or performance.
Able to install equipment, machines, wiring, or programs to meet specifications
Ability to control operations of equipment or systems
Ability to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Able to monitor gauges, dials or other indicators to make sure a machine is working properly.
Minimum Experience Required:

Minimum 1-2 years’ experience performing scheduled and unscheduled maintenance to include: 12/24/36/72 month inspections on charter and/or corporate mid-size jets.
Gulfstream model experience preferred.
 
Job Number: 368921
Job Location: Van Nuys, CA.
Per Diem: If Qualified
Overtime: Possible
Duration: Temp-Direct
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 12/09/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer - Powerplant & FIFA

Description:
The Aerospace Engineer, Powerplant & FIFA position located here in Moses Lake, WA is responsible for supporting the development and TC test pertaining to the Propulsion System including the Nacelle and Engine Build-up (EBU), Auxiliary Power Unit (APU), and the Aircraft Fuel System. This role requires the significant exercise of independent discretion and judgment in matters of significance.



Job Duties and Responsibilities (Essential Functions):

Support Flight Testing Activities, including but not limited to:
Discuss and review test plans and preparation activities.
Help determine test specifications (based upon system architecture).
Attend Ground/Flight Test briefing and debriefings
Participate in Test Readiness Reviews and ensure on-time Engineering deliverables.
Generate developmental engineering drawings and instrumentation change requests as required.
Monitor live flight data, typically via telemetry, during flight test on aircraft.
Create and review Aircraft Restrictions
Create and review Aircraft Troubleshooting
Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
Process, analyze, and draw conclusions from post flight data.
Identify non-conformances, quality escapes, etc. to create rejection tags.
Make assessments to ensure safety of flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate limitations documentation.
Write flight test results reports.
Complete special projects and tasks assigned by Group Lead.


Requirements
Knowledge/Skills/Abilities

Strong Knowledge of flight test operations and flight certification, including:
Propulsion System Integration and Certification.
APU and Tailcone Integration and Certification.
Compliance to requirements for; Powerplant / APU Installation, Engine Oil and Fuel System, FADEC, Engine Operating Characteristics, Negative G, Rotorlock Screening, In-flight Restarts, Engine Performance, Cooling and Ventilation, Drainage, Engine / APU Inlet Distortion, Water Ingestion, Fireworthiness, and Thrust Reverser Endurance.
Aircraft Fuel Systems Design, Integration and Certification.
Experience with; Fuel Vent System, Negative G, Cold Soak / Cold Weather Operation, Ullage and Sump Volume, Fuel System Performance, and Fuel Icing Rig.
Well versed with 14 CFR Part 25 and EASA CS-25 certification process.
Good leadership presence as well as people management skills:
Future-oriented in thinking and operation.
Able to lead by example and live/work by company values.
Ability to successfully contribute to a positive and productive work environment.
Able to instill a sense of urgency in team members.
Able to be patient and objective in difficult situations with different types of people.
Strong skill set for:
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong follow-through, quick thinking and resourceful.
Ability to remain calm, cool and collected in stressful situations.
Strong sense of urgency to resolve the issue.
Strong organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Ability to work in a progressive, fast-paced environment (work well under pressure).
Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Strong communication skills (oral, written, presentation) with both external and internal team.
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
Excels at communicating clearly and effectively verbally. Strong proficiency in writing summaries, documents, reports, and presentations.
Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems.
Proven track record of improving the efficiency of assigned processes or procedures.


Education

Four (4) year degree in Engineering (Aerospace or Mechanical).
Other Engineering fields may be considered.
Experience

Four (4) years aerospace Relevant aerospace engineering experience in propulsion systems including the Nacelle and Engine Build-up (EBU), Auxiliary Power Unit (APU), and the Aircraft Fuel System.
 
Job Location: Moses Lake, WA
Input Date: 10/09/2018
Last Updated: 11/06/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Aerospace Engineer, Powerplant & FIFA

Description:
The Aerospace Engineer, Powerplant & FIFA position is responsible for supporting the development and TC test pertaining to the Propulsion System including the Nacelle and Engine Build-up (EBU), Auxiliary Power Unit (APU), and the Aircraft Fuel System. 
 
Job Duties and Responsibilities:

Support Flight Testing Activities, including but not limited to:
  1. Discuss and review test plans and preparation activities.
  2. Help determine test specifications (based upon system architecture).
  3. Attend Ground/Flight Test briefing and debriefings
  4. Participate in Test Readiness Reviews and ensure on-time Engineering deliverables.
  5. Generate developmental engineering drawings and instrumentation change requests as required.
  6. Monitor live flight data, typically via telemetry, during flight test on aircraft.
  7. Create and review Aircraft Restrictions
  8. Create and review Aircraft Troubleshootings
  9. Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
  10. Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
  11. Process, analyze, and draw conclusions from post flight data.
  12. Identify non-conformances, quality escapes, etc. to create rejection tags.
  13. Make assessments to ensure safety of flight determination.
  14. Document flight test design problems for long term fix.
  15. Generate and review appropriate limitations documentation.
  16. Write flight test results reports.

Complete special projects and tasks assigned by Group Lead.
Knowledge/Skills/Abilities:
  • Strong Knowledge of flight test operations and flight certification, including:
    • Propulsion System Integration and Certification.
    • APU and Tailcone Integration and Certification.
    • Compliance to requirements for; Powerplant / APU Installation, Engine Oil and Fuel System, FADEC, Engine Operating Characteristics, Negative G, Rotorlock Screening, In-flight Restarts, Engine Performance, Cooling and Ventilation, Drainage, Engine / APU Inlet Distortion, Water Ingestion, Fireworthiness, and Thrust Reverser Endurance.
    • Aircraft Fuel Systems Design, Integration and Certification.
    • Experience with; Fuel Vent System, Negative G, Cold Soak / Cold Weather Operation, Ullage and Sump Volume, Fuel System Performance, and Fuel Icing Rig.
    • Well versed with 14 CFR Part 25 and EASA CS-25 certification process.

  • Good leadership presence as well as people management skills: 
    • Future-oriented in thinking and operation.
    • Able to lead by example and live/work by company values.
    • Ability to successfully contribute to a positive and productive work environment.
    • Able to instill a sense of urgency in team members.
    • Able to be patient and objective in difficult situations with different types of people.

  • Strong skill set for:
    • Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
    • Strong follow-through, quick thinking and resourceful.
    • Ability to remain calm, cool and collected in stressful situations.
    • Strong sense of urgency to resolve the issue.

  • Strong organizational, time management and prioritization skills:
    • Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
    • Able to be flexible with attention and priority.
    • Ability to work in a progressive, fast-paced environment (work well under pressure).

  • Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
  • Strong communication skills (oral, written, presentation) with both external and internal team.
    • Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
    • Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
    • Excels at communicating clearly and effectively verbally. Strong proficiency in writing summaries, documents, reports, and presentations.

  • Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
  • Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
  • Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems. 
  • Proven track record of improving the efficiency of assigned processes or procedures.

 
Level Requirements (Minimum):
Education


  • Four (4) year degree in Engineering (Aerospace or Mechanical). 

    • Other Engineering fields may be considered.


Experience

  • Four (4) years aerospace Relevant aerospace engineering experience in propulsion systems including the Nacelle and Engine Build-up (EBU), Auxiliary Power Unit (APU), and the Aircraft Fuel System.

 
Travel (flying and driving) to various domestic and international worksites and client offices are required.  Frequent travel required to the Moses Lake Facility for extended periods of time during scheduled flight test operations.
 
 
Job Number: 1810088065
Job Location: Moses Lake, WA
Duration: 24 months
Input Date: 07/04/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002maMWAAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Stress Analyst Secret Cleared (549)

Description:
*This is a 1 year or more contract position located in Orlando*
*Must have an Active Secret Clearance in order to start position*



We are seeking a contract stress analyst or structures engineer who will be working on flight vehicle (fixed or rotary wing) on aircraft and/or missiles applying knowledge to dynamics and stress of flight of different materials upon vehicles. Models will be put into simulations, and need top pass physical as well as environmental conditions analysis, using linear/non-linear methods.



Candidate will be testing, analyzing, and modifying existing aircraft and integrating modified components into airborne vehicles. The applicant will be a lead analyst, and as such, in addition to normal stress analysis duties, will also will analyze and write documentation using military specifications, internal structural manuals, developing working models, etc.



Required:
*Current Active Secret Clearance
*5+ years’ experience in stress/structural analysis of aircraft using MSC or Nastran
*Good FEA, FEMAP, IDEAS (or NX/ANSA) skills.
*Knowledge of hand analysis.
*4 year Mechanical Engineering degree
 
Job Number: 549
Job Location: Orlando, FL
Input Date: 12/03/2018
Last Updated: 12/12/2018
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Tooling Design Engineers III

Description:
STS Technical Services is now Hiring Aerospace Tooling Design Engineers III in Savannah, Georgia!

Position Summary:
Performs engineering work related to the design of complex tools and equipment used in the manufacture and support of company aircraft.

Essential Duties & Responsibilities:
Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of company aircraft
Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures
Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers
Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures
Write complex procedures on use of tools
May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives
Additional Functions:
Actively works to improve daily processes, and ensures all work meets customer requirements
Assist Tool shop as needed, during Periodic and Conformity Inspections
Assist in formulating Tool Design policies, procedures, and specifications as required
Perform other duties as assigned

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering (a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job)
Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment
Tool Design experience required

Benefits:
STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 44493
Job Location: Savannah, GA
Duration: Contract
Input Date: 11/08/2018
Last Updated: 11/15/2018
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Assembly Technician

Description:
PDS Tech is seeking an Aircraft Assembly Technician for an open position in Mesa, AZ.
In your role, you will:

  • Assemble, disassemble, install, test and troubleshoot mechanical and electrical assemblies and subassemblies on aircraft systems.

    Follow computer based and other specific processes and systems, including manufacturing planning, wiring diagrams, system schematics, process specifications, engineering sketches, and other forms of written and oral instructions. Follow specific tool control, FOD control and safety guidelines and policies.

High School Diploma or GED
At least 2 – 3 years recent experience with mechanical, electrical/avionics, sheet metal or composites on aircraft systems. Need experience and proficiency in any or all of the following: Flight Control systems (build, install and rig), Fuel system installations, Avionics, aircraft wire installation, Engine (build and install), Canopies and Doors. Rotorcraft experience preferred. A & P License preferred.
 
Job Number: 1810088233
Job Location: Mesa, AZ
Duration: 12 months
Input Date: 09/06/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mindy Moore
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mb79AAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Door Design Engineer

Description:
General Summary:
Engineer, Doors Design is responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with a minimum of 10 years directly related experience designing aviation systems; experience can be substituted for the lack of an appropriate degree
2. Some Travel may be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.


The Structures Company is an AA/EOE.
 
Job Number: 217
Job Location: Greensboro, NC
Rate: $50-$60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 10/05/2018
Last Updated: 11/14/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interior Design Engineer

Description:
General Summary:

The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. This includes requirements definition for the entire interior including liners, monuments, and seats. Familiarity with FAA certification requirements pertaining to aircraft interiors and human factors is desired. The individual will also support production aircraft completions and supply chain as needed to clarify requirements and provide dispositions to engineering deviations. Most important is the desire to work as a key contributor to the overall engineering organization and provide our customers with the world’s most advance aircraft.

Duties and Responsibilities:
• Creates conceptual designs for interiors of the aircraft through 3D modeling software (CATIA), drawings, and/or drafting application
• Develops designs for form/fit/function to meet customer and design criteria
• Provides designs for the fabrication process including sheet metal, extrusions and inject molding
• Familiarity with structural analysis methods, load paths, and material properties
• Validates engineering designs per engineering core principles, design standards, processes and industry best practices
• Makes recommendations to engineering lead/management
• Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes
• Ensures adherence to program schedule

• Education, Work Experience, Certification and/or Licensure:
• Bachelors’ degree in an engineering field of study from a four year college or university is required. (In lieu of degree, management may elect to consider individuals with a equivalent years of combined experience and training)
• Masters’ degree in Engineering preferred
• Minimum of 15 years engineering design experience directly related to mechanical/interior design required.

The Structures Company is an AA/EOE.
 
Job Number: 248
Job Location: NC
Rate: $55/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: November
Input Date: 10/29/2018
Last Updated: 12/01/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Loads Engineer

Description:
General Summary:

Responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.

Duties and Responsibilities:
Applicant must be able to define and validate aircraft flight and ground loads through simulation/calculation using established theory and methods


Qualifications
Education, Work Experience, Certification and/or Licensure:
BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
Applicant shall possess a minimum of 6 years’ experience in aircraft external Loads analysis; 10 years’ experience is preferred
Excellent communication skills both written and verbal
Experience and demonstrated proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required. Python experience and/or proficiency is desirable

Knowledge, Skills and Abilities:
Knowledge of static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements. Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable
Knowledge of, and experience with, FAA FAR 23 and EASA CS 23 Loads regulatory requirements and means of compliance is required, and experience with FAA FAR 25 and EASA CS 25 Loads regulatory requirements and means of compliance is desirable
Organize, schedule and effectively coordinate work packages / phases, and lead less experienced team members in loads analysis tasks
Must be proficient in generating documentation to support certification efforts related to external loads
Knowledge of, and experience with, aeroelastic principles and concepts, including but not limited to static aeroelastic analysis including divergence and control reversal, is required
Knowledge of, and experience with, dynamic aeroelastic analysis is desirable. Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable
Strong knowledge of CFD principles and CFD-based modeling, along with wind tunnel test data usage for Loads analysis, is required. Applicant must be able to communicate aerodynamic, structures and systems discipline input needs to ensure accurate load set development and conveyance.
Good fundamental knowledge of mass properties principles as they relate to loads analysis
Knowledge and experience with cable-driven / mass-balanced flight control systems required including limited-authority servo systems, and knowledge of, and experience with, advanced flight control architectures including full-authority actuator systems, is desirable
Strong knowledge of flight test data analysis related to structural design loads substantiation, as well as a demonstrated ability or experience with development of computational methods relating to loads analysis

The Structures Company is an AA/EOE.
 
Job Number: 239
Job Location: NC
Rate: Up to $75/Hr. *DOE*
Per Diem: Yes
Duration: 9+ Month
Start Date: October
Input Date: 09/17/2018
Last Updated: 11/14/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Aircraft Mechanics

Description:
Role Description
  1.  Service, repair, troubleshoot and modify aircraft and aircraft engines.
  2. Repair, replace and rebuild aircraft structures, system and functional components.
  3. Assemble and install electrical, plumbing, mechanical, hydraulic, structural components and accessories using hand tools and power tools.
  4. Adjust, align and calibrate aircraft systems using hand tools, gauges and test equipment, machines and equipment such as shears, sheet metal brakes, welding equipment, pneumatic tools.
  5. Research and understand FAA technical data relevant to assigned tasks.
  6. Maintain the premises in a clean and organized manner.
  7. Remove and/or install aircraft components, test IAW MM, and troubleshoot aircraft systems.

Knowledge/Skills/Abilities:
 
  • Strong knowledge in FAA regulations, Aviation Rules (FOD’s, Safety, Quality, Hazardous Materials, Aircraft Marshalling), aerodynamics, aircraft electrical systems, materials science, aircraft maintenance, electrical testing, instrumentation, gas turbine and piston power plants.


  • Good leadership (individual contributor) presence:

    • Able to lead by example and live/work by company values. 
    • Ability to successfully contribute to a positive and productive work environment.
    • Able to instill a sense of urgency in team members. 
    • Able to be patient and objective in difficult situations with different types of people.



  • Good customer service tool box:

    • Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
    • Strong follow-through, quick thinking and resourceful.
    • Ability to remain calm, cool and collected in stressful situations.
    • Strong sense of urgency to address and solve important issues.

  • Good organizational, time management and prioritization skills:
    • Able to multi-task, maintain focus on several different projects at one time and hit deadlines. 
    • Able to be flexible with attention and priority.
    • Ability to work in a progressive, fast-paced environment (work well under pressure).

  • Good analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
  • Good communication skills (oral, written) with customers.  
    • Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.

  • Good interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization. 
  • Good project management skills, including the ability to take ownership for accomplishing assigned tasks.  Results-oriented planner who ensures that goals are met.  Able to set priorities and keep to projected schedules.
  • Computer Skills:  Comfortable and effective working in Microsoft Office, including Word, Excel, Outlook, and PowerPoint.

 
Education
 
  • Associate’s Degree (or Technical School equivalent) in Aircraft Maintenance or related field from an FAA accredited school   
  • A&P Certificate
  • Japanese Bilingual preferred

 
Experience
 
  • Three (3) plus years of aircraft mechanical experience preferred

 
Job Number: 1810089104
Job Location: Moses Lake, WA
Duration: 6 months
Input Date: 07/31/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mf2gAAA&URLSource=cjhunter

Aircraft Seat/Slide Technician

Description:
PDS Tech is seeking Aircraft Seat/Slide  Techs for open positions Atlanta, GA


  • Perform final assembly of interior systems and mechanical assemblies. 
  • Disassembles aircraft interior components.
  • Responsible for proper storage and separation of serviceable parts, i.e. bin or bag.
  • Responsible for proper storage and separation of unserviceable parts, i.e. reject or scrap.
  • Wash serviceable parts.
  • Seat Cleaning.
  • Correct usage of pressure washer.
  • Removal of aircraft seat cushions.
  • Removal of aircraft seat dress.
  • Completes daily paper work for job assignments, indicating material used and amount of time involved.

Basic Qualifications:
  • High School Diploma or GED
  • Mechanical experience required
  • A&P license a plus
  • Knowledge of basic hand tools, i.e.
  • Knowledge of applicable power tools.
  • Completion of seven (7) required safety courses: Respiratory Training, Injury Prevention Program, Emergency Action Plan, Blood borne Pathogens, Hazardous Communication, Lock Out Tag Out, Ergonomics.

 
Job Number: 1810084811
Job Location: Atlanta, GA
Duration: 3 months
Input Date: 04/25/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mNhPAAU&URLSource=cjhunter

Assembler

Description:
PDS Tech, Inc. is seeking Assemblers in Lincolnshire, IL.  
Please reach out to Tiffany Armour tarmour@pdstech.com or call her at 480-351-2945

In this role, you will make utility safety equipment used in commercial, industrial, and residential settings.

What you will do:
  • Assemble fabricated parts at floor stations.
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications.
  • Use hand tools and power tool to assemble units according to product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.

What you will get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training in the area of specialty
  • Opportunity to work with a team making products used in facilities worldwide
  • A fair and consistent pay check

Education Required:
  • High school diploma or GED

Qualifications:

  • Ability to read blueprints
  • mechanical assembly experience


Must provide own safety shoes.

Schedules/Shifts Available:


  • 6:30 am - 3:00 pm

 
Job Number: 1810081754
Job Location: Lincolnshire, IL
Duration: 4 months
Input Date: 05/08/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tiffany Armour
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dxB4AAI&URLSource=cjhunter

Assembly & Test Technician - Navigation Systems

Description:
PDS Tech, Inc. is seeking an Electro-Mechanical Assembly & Test Technician in Clearwater, FL.
• Performs standard testing processes on a variety of equipment and records and analyzes results. 
• This role will be assembling navigation systems. 

  • Candidates require high level of manual dexterity
  • Candidates should have minimum 2 years electro-mechanical assembly experience. 
  • Must be able to work with small intricate or delicate parts – some parts contain beryllium. Perform all other related duties as assigned. 
  • Precision soldering under a microscope experience preferred. 
  • Experience in handling of optical fiber and fusion splicing of fiber preferred but not required. 


 

 
Job Number: 1810083537
Job Location: Clearwater, FL
Duration: 8 months
Input Date: 11/01/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mJYCAA2&URLSource=cjhunter

Avionics Technician

Description:
The ideal candidates will:

  • Determine routing of wires and location and best methods of installing.
  • Install, tests, repair, troubleshoot and performs maintenance and repair of conventional electronic controls, devices and systems.
  • Perform mechanical operations necessary to the dismantling, disassembly, repair, assembly, and installation of electrical units.
  • May be required to operate electronic data entry, storage, processing.
  • Perform installation, maintenance, and repairs on aircraft.
  • Locate and diagnose failures, replaces defective components and performs basic troubleshooting using standard electronic equipment.  

8 years’ experience on H-60 Aircraft is required.
 
 
Job Number: 1810092572
Job Location: Huntsville, AL
Duration: 18 months
Input Date: 09/27/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Sherrita Davis
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f3m2AAA&URLSource=cjhunter

Avionics Technician 2

Description:
PDS TECH INC. is seeking Avionics Technician 2 located in Rancho Bernardo,CA.


Summary:

Performs a variety of duties in the electronic, mechanical, or electromechanical areas.
Constructs, troubleshoots, calibrates, adjusts, tests, and maintains equipment, components, devices, or systems.
Works from engineering drawings and written or verbal instructions.
Operates related equipment; conducts tests and reports data in prescribed format.
Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

 
Basic Qualifications:
*High School Diploma/GED and a min of 2 year of experience fabricating and testing aircraft electrical wire harnesses.
*Experience reading and working to wiring schematics, blueprints, parts lists, and other engineering documentation.
*Knowledge of Electro-Static Discharge (ESD) and Foreign Object Elimination (FOE) principles and experience working in an ESD and FOE sensitive environment.


Preferred Qualifications:
*Previous certifications for fabricating and testing electrical harnesses per IPC/WHMA-A-620.
*Previous certifications and experience soldering electrical and electronic assemblies per joint industry standard IPC J-STD-001.
*Previous experience with 5S practices and working in a lean manufacturing environment.
* AA Degree preferred.
 
 
Job Number: 1810085210
Job Location: San Diego, CA
Duration: 12 months
Input Date: 04/24/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mPTtAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Bleed Air Designer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-024
Job Location: Greensboro, NC
Rate: Up to $60/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/17/2018
Last Updated: 11/14/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Bleed Air Systems Designer

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.

Physical Requirements:
1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.

The Structures Company is an AA/EOE.
 
Job Number: 240
Job Location: NC
Rate: $55/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: October
Input Date: 10/04/2018
Last Updated: 12/12/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

C6141 Electro-Mechanical Tech I

Description:
Primary Function: Conducts preliminary diagnostic analysis of products for repair and/or troubleshooting using schematics, diagrams, and system knowledge.

Major Responsibilities:

  • Demonstrates good mechanical and/or electrical aptitude.

  • Has experience with automotive, truck or boat mechanics or electrical systems.

  • Able to disassemble mechanical and electrical vehicle components.

  • Able to install new mechanical and electrical vehicle components.

  • Able to conceive of and prototype simple mechanical devices such as armor plate, brackets, fixtures, etc.

  • Demonstrates basic cutting, grinding, drilling skills and/or soldering, wiring, and electrical fabrication skills.

  • Good problem solving skills.

  • Works on assembly of products to meet defined schedule.

  • Assembles pre-made mechanical components according to print, manual, or verbal instruction.

  • Tracks performance by updating assigned metrics.

  • May, train or guide staff with less experience in particular products.

  • Follows released and standard procedures to assemble products.

  • Conducts troubleshooting of parts and products using schematics and drawings.

  • Takes direction from more senior staff.

  • Demonstrates the ability to work independently and with limited supervision as needed.


Position Requirements:


  • High school diploma

  • 0 -2 years of experience conducting related electrical/mechanical assembly tasks.



 
Job Number: 18-47441
Job Location: Columbus, OH
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-05-25 00:00:00.0
Start Date: 2018-11-26 00:00:00.0
Input Date: 11/07/2018
Last Updated: 12/13/2018
Firm Name: NESCO RESOURCE
Attention: Aaron Ludwig
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Designer

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

CAD Designer
(US Citizenship Required*)
Marion, VA
2018-7214

Responsibilities:
• 3D design and modeling of mechanical hardware
• Applying 3D dimensions and text to 3D models using the FT&A module
o (3D-Model Based Definition)
• Generating 3D-PDF files using Anark software (training provided)

Qualifications:
• Strong mechanical design background
• Proficient in the Catia V5, Part Design, Assembly Design, Generative Shape Design, and Functional Tolerancing & Annotation modules
• Proficient in GD&T
• ASME Y14.100 Engineering Drawing Practices
• ASME Y14.5 Dimensioning and Tolerancing
• ASME Y14.41 Digital Product Definition Data Practices
Preferred:
• Windchill PDM System
• Mechanical Engineering Degree
• Experience in the manufacture of mechanical assemblies
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Associate's degree or equivalent is required plus a minimum of 5 years of relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7214
Job Location: Marion, VA
Duration: 6 Months
Input Date: 11/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Detrom Garrett
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Operator

Description:
Must be proficient in AutoCAD (version 2014 or higher). Must be proficient using Windows based software and MS office 2000 or higher (Excel, Word, PowerPoint, etc.). Must have strong organizational skills. Someone with a little bit of experience in the construction field



PREFERRED.


  • More along with electrical or mechanical construction, not electronic board layouts.

  • Willing to look at candidates recently graduated from school but has some business experience as a CAD person.

  • High school or equivalent education required.

  • Resumes need to be well constructed, accurate, spell checked, etc. which shows attention to detail with the desire to do a good job. It shows that the candidates care about what they put their name on.

  • Receive project assignments from Design Team member.

  • Under supervision, prepare construction drawings required to support the installation of electronic special systems (fire alarm, security, access control, and other low voltage specialty systems)

  • Electronic systems drawings will typically consist of items such as floor plan layouts, riser diagrams, electrical interconnections drawings and installation terminations.

  • ¿Prepare submittal documentation (i.e.,. data sheets, battery calculations) Maintain project drawing files, and associated records and documentation tracking & maintaining as-built drawings Perform other duties as assigned.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 18-43362
Job Location: Irving, TX
Rate: 22.46USD/Hour
Per Diem: --
Overtime: --
Duration: 2018-08-05 00:00:00.0
Start Date: 2018-06-25 00:00:00.0
Input Date: 10/11/2018
Last Updated: 11/29/2018
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

CNC Machinist SECRET

Description:

Security Clearance required

JOB FUNCTION

Under minimum Shop Supervision, accurately and efficiently sets-up and operates 5axis CNC Mills to manufacture tooling and parts.
 
 
JOB RESPONSIBILITIES
This document in no way states or implies that these are the only duties to be performed by the employee occupying the position.



  • Performs sets-up and operates a CNC Mill to provide Quality Parts and Tooling.
  • Interprets and follows engineering planning.
  • Performs inspection of machined parts.
  • Performs MDI’s on programs when necessary.
  • Interfaces and partners with Engineering, Programming and Quality Inspection as necessary.
  • Clearly interfaces and established effective communication with opposite shift via logbook, verbal communication and shift interchanges.
  • Performs troubleshooting of quality errors to assist in the root cause & correction process.
  • Informs and escalates issues to the Supervisor accordingly and refrains from making modifications to the program without seeking proper approval.
  • Participates in 6S programs and maintains work area, tools, and equipment in a neat, clean, and orderly manner.
  • Operates forklift and crane in accordance with standard operating procedures.
  • Performs other related duties as required and assigned.
  • Actively participates in company behavioral safety program.

 
 
EDUCATION
Any combination of education and experience providing the required skill and knowledge for successful job performance will be considered.

  • CNC Machinist Certification preferred.
  • Forklift and Crane certification preferred.

 
 
EXPERIENCE & QUALIFICATIONS

  • Must be a U.S Citizen and not hold multiple citizenships.
  • Must possess Secret Security Clearance and maintain security clearance for the duration of employment.
  • 5 + years’ experience desirable operating full 5 Axis CNC mills.
  • Proficient with Fanuc 15MB and 30i controls (Siemens 840D a plus) or Heidenhain.
  • Ability to read blue prints, maintain tolerances, and able to perform own set-ups.
  • Experience machining Invar, Aluminum, Composite and Graphite materials.
  • Knowledge and understanding of machining techniques and processes.
  • Technical aptitude and excellent judgment skills.
  • Ability to use manual inspection equipment i.e. Micrometers, Calipers, Bore Gages etc.
  • Ability to MDI (Manual Data Input) hole patterns and radii.
  • Perform Trigonometry.
  • Thorough understanding of machining different materials and the ability to calculate spindle speed, machining feedrates, and proper chip load.
  • Over 4,000 hours experience with Fanuc controls, Siemens or Heidenhain.
  • Knowledge of advanced cutting tool technology.
  • Optimization of feeds and speeds.
  • Forklift and crane proficiency.

 
 
CORE COMPETENCY

  • Read/communicate with coworkers and leads.
  • Knowledge of GD&T, shop math, and blueprint reading.
  • Proficient Forklift and crane operating skills.


  • Problem solving – the individual identifies and reports problems in a timely manner.
  • Interpersonal Skills – the individual remains open to ideas and exhibits willingness to try new things.
  • Oral communication – the individual speaks clearly.
  • Quality Control – the individual demonstrates accuracy and thoroughness and monitors own work to ensure quality.
  • Adaptability – the individual adapts to changes in the work environment, manages competing demands and is able to deal with frequent change, delays or unexpected events.
  • Dependability – the individual is consistently at work and on time, follows instructions, responds to management direction and solicits feedback to improve performance.
  • Safety and security – the individual actively promotes and personally observes safety and security procedures, and uses equipment and materials properly.

 
 
Working Conditions:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • Typically stands for extended periods at workstation.
  • Will use hands for extended periods of time while operating CNC mills.
  • See, hear, touch, feel and lift (up to 40 lbs.)
  • Will access and work in the manufacturing plant.
  • Will be required to stand for extended periods of time when conducting training, CI events or work cell duties.
  • While performing the duties of this job, employee may be exposed to moving mechanical parts, fumes and airborne particles.
  • May be required to travel to other site locations during the work day.
  • May be required to work OT and weekends to meet department and business demands.
  • Work with safe manufacturing processes and understands PPE that is required in the manufacturing area.
  • Knows the purpose and location of Material Safety Data Sheets.


 
Special Requirements:
Employment is contingent upon successfully passing an employee reference check, criminal background check, and drug screening.
This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR).



 
Job Number: 1810089624
Job Location: Santa Ana, CA
Duration: 36 months
Input Date: 08/10/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mhSrAAI&URLSource=cjhunter

CNC Machinist

Description:
CNC Machinist applies advanced skills in administration and use of procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. 2. Independently perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. 3. Set up and operate necessary test equipment in accordance with required documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. 4. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required maintenance data to ensure conformity requirements are met. 5. Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. 6. Demonstrate expertise and efficiency in repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. 7. Demonstrate expertise in use, maintenance, and calibration requirements of precision measuring and inspection tools such as, but not limited to, micrometers, calipers, bore gauges, multimeters, watt meters, spectrum analyzers, and borescopes. 8. Demonstrate expertise in the flow of materials and work order processes within the repair station. 9. Maintain and utilize all required paperwork in accordance with FAA Repair Station requirements. 10. Maintain a clean and orderly work area. 11. Comply with all company and legislative environmental health and safety regulations. Must be proficient in the setup and operation of 3-5 axis CNC Mills. Must be able to setup and operate conventional mills and lathes and use related precision measuring tools to inspect machined detail components to blueprints / 3D models.


CNC Machinist Lay-out, remove, fabricate and/or install major and minor repairs to flight controls and other secondary structure components using honeycomb core sandwich construction techniques, composite repair techniques, test bench procedures, hydraulic press procedures, and servicing carts. 2. Fabricate and repair sheet metal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. 3. Remove & install APUs and perform all required APU maintenance for all aircraft models 4. Perform repairs to electronic assemblies and subassemblies by removing and replacing circuit components, either through hole or surface mount, using acceptable soldering and circuit repair techniques. 5. Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. 6. Assist with training and instructing of other Acft Compo Repair I and II Techs. 7. Perform other duties as assigned.
HS diploma or GED. A&P license, FCC license, or NCATT cert preferred. Able to read/interpret blueprints, engrg docs and use/read precision measuring tools. Proficient in the operation of all tools & equip in the dept. Basic understanding of shop math. 4 yrs. experience in one of the following or other related expr: Sheetmetal, hydraulic overhaul, avionics/elect compo repair. Accredited schooling in electronics and elect sys may offset some experience reqmts. APU removal, install, service.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/04/2018
Last Updated: 12/07/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

Cabinet Finisher II

Description:
PDS is seeking a Cabinet Finisher II  for an open position in Savannah, GA.

Under general supervision, prepares and applies finishes to aircraft furniture using aircraft specifications, designs and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship. 

Principal Duties and Responsibilities: 

Essential Functions: 1. Works under general supervision to prepare furniture for finish and disassembly using blueprints, aircraft specifications and design/engineering drawings. 2. Performs high quality repairs to various finished surfaces in the shop and aboard aircraft. Cleans and polishes blemishes as needed to prepare the aircraft for delivery. Applies finish to furniture using spray equipment and other manual/mechanical methods. 3. Uses various types of sandpapers, polishes, adhesives, masking mediums, solvents, finish materials, hand tools and various power tools to disassemble and finish furniture. 4. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior (PTP). 5. Uses the material tracking system to create parts demand, track squawks and to sign-off work. 

Additional Functions: 1. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques. 2. Performs other duties as required. 

Please contact our Altanta or Savannah offices:  Atlanta@pdstech.com Office: 877-272-0088 and SavannahBranch@pdstech.com Office: 912-480-4706
 

Education and Experience Requirements:

High school diploma/GED. Two (2) years experience in wood finishing. Experience in aerospace industry preferred. Basic knowledge of cabinet finishing processes and products.

 



Unique Skills:



Knowledge of Solumina preferred but not required.

Other Requirements: 1. Possess a working knowledge of inspection and process specifications. 2. The ability to read, write, speak, and understand the English language. 3. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 4. Must be computer literate.


 
Job Number: 1810082578
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/25/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e0N6AAI&URLSource=cjhunter

Calibration Development Engineer

Description:
PDS TECH INC is currently looking for a Calibration Development Engineer  for our client near Santa Clarita. 

Responsibilities include:
Development primary focus revolves around engine mapping.
Responsibilities include planning, coordinating, executing and reporting on engine calibrations, engine systems or other powertrain systems as required.  
Collect data from testing on dynamometers, test rigs, and any other external test facilities and/or at the race track.  
Subsequent analysis and reporting is required.
Experience with Matlab, Atlas, and AVL software preferred and with Bosch, PI/Cosworth, Motec a plus.
Development may include performance, drivability and/or reliability of engines, engine systems and/or powertrain components per project goals. Must complete writing of test requests, daily progress, test reports and a concise presentation of testing results, analysis, conclusions and suggestions for future development as needed.
Must be able to execute tests first-hand, able to (post-) process raw data and present final results to technical reviews.
Post processing experience with engine controls system such as Simulink is preferred.


Qualifications
 
Requirements include Bachelor's of Science in Mechanical Engineering or equivalent with a solid understanding of internal combustion engines; 3-5 years minimum experience with development and testing of racing engine or chassis components.
 
Previous dynamometer testing of high performance race engines including setup and maintenance; technical report writing. Previous experience with AVL Puma, MTS/Adapt, Pi Toolbox or Wintax software a plus.
 

Must have the ability to plan, organize, schedule and coordinate activities for self-based on an evaluation of work needs and an estimation of timing and create efficient test procedures, specifying the necessary data acquisition and analyze the results to reach an accurate conclusion and present suggestions for follow-up work.
Must have excellent verbal and written communication skills; ability to work in team environment and able to work under minimal supervision; ability to be self-directed, detailed oriented who can effectively work well under pressure in a diverse environment.
Willingness to be hands on in a fast pace environment.

 

 
Job Number: 1810094624
Job Location: Santa Clarita, CA
Per Diem: No
Duration: 12 months
Input Date: 11/07/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Hemant Sachdev
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qxmAQAQ&URLSource=cjhunter

Composite Technician (5) - CO

Description:
Chipton-Ross is seeking a Composite Technician (5) for an opening in Littleton/Waterton, CO.

RESPONSIBILITIES:
We are looking for talented Composite Technicians that have a strong mechanical aptitude and are eager to learn more about the industry. The technician's will be tasked to layup complex parts, final bag them cure, and process them through a curing vessel. Our technicians are also charged with bonding different types of fittings, inserts, spools, and cups using a multitude of adhesives. Employees will also be asked to complete minor hand machining operations using all types of manufacturing hand tools. Technicians are tasked to preform assembly work using close tolerance fasteners. Additional technician responsibilities also include attention to detail, use of personal protection equipment, ability to work in small teams and to work to established schedules. Employee's should be able to work overtime as required and weekends if needed.

REQUIRED EXPERIENCE:
Must be able to - Receive detailed written instructions from a supervisor, lead technician, or manufacturing engineer - Perform adhesive bonding operations to fabricate parts and/or for repair applications - Selects tooling and materials compatible with the processing techniques identified in the work instructions - Performs pre-preg composite lay-up - Verify work and ensure a defect free part prior to presenting to quality control
1-3 years experience

PREFERRED EXPERIENCE:
Experience in composite hardware layup/assembly. Past experience working in an aerospace manufacturing environment.
- Installation and torqueing of fasteners - Drilling and installing rivets - Measurement and shimming interfaces to close tolerances - Apply aerospace paint, primer and other coatings using spray, brush, swab applications - Surface prep, using grit blast, hand abrade and power abrasion techniques - Vacuum bag processing - Oven/autoclave curing operation - Tooling fabrication from various materials such as aluminum, composites, and wood - Working with small shop power tools (saws, routers, sanders, and grinders) - Machine shop equipment operation (mill, lathe, table saw, band saw, etc) - Assembly of composite structures including setup, bonding, and fastener applications. - Operation of measuring devises such as calipers, height gages, micrometers, and torque wrenches.
Aircraft & Powerplant license or similar professional certifications

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
1st Shift
Full-Time


 
Job Number: 174525
Job Location: Littleton/Waterton, CO
Rate: Up to $27.33 DOE
Duration: 4 Months
Input Date: 10/15/2018
Last Updated: 12/13/2018
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Management

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Configuration Management
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-7288

Responsibilities:
• Support Process Engineering Changes; focus on data and change management documentation, not involving actual Engineering design work.
• Support analysis and updating of Excel spreadsheets to track the Engineering Change Accomplishment Records for manufacturing incorporations.
• Support processing of Subcontractor Data Requirement Lists
• Prepare and route associated emails requesting approvals, archiving documents and updating the database to reflect accomplishments.

Qualifications:
• Proficient in writing changes in Teamcenter or another major Product Data Management System
• Must have exceptional team relationship skills as well as exceptional attention to detail and quality
• Must demonstrate good written and oral communication skills
• Proficiency with MS Office applications including Word, Excel, and PowerPoint
• Able to work independently as well as in a team environment
• Demonstrated effective time management skills
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Pursuing a Bachelor of Science degree in an engineering discipline, Electrical Engineering, Mechanical Engineering, or Physics preferred, from an accredited 4-year university or college.
• Ideal candidate should have between 1-3 years of relevant experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7288
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 11/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Sallye Smith
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Composite Aircraft Propulsion Structures

Description:
Design Engineer - Composite Aircraft Propulsion Structures
Location: Chula Vista, CA


MIN. EDUCATION: ABET Approved Bachelor Engineering: Aerospace or Mechanical


MIN. EXPERIENCE:

•8 Yrs Aerospace-Structural Designing (6 yrs with w MEng.)
•6,000 Hrs Using CATIA V5
•3 Years Designing Composite Parts with CPD or 3 Years with Fibersim


DURATION: Estimate 1-2 years











Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55265
Job Location: Chula Vista, CA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 10/31/2018
Last Updated: 11/12/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II with PTC CREO

Description:
WHO ARE WE
LMI is a world-class leader in designing, building and manufacturing aerospace structures, systems and components for commercial, business and regional, and military aerospace customers. We employ engineering, manufacturing and testing experts throughout the United States and the rest of the world. Our integrated team approach and full life cycle of capabilities enable our employees to take advantage of a wide range of opportunities for career growth within our organization.

POSITION SUMMARY

We are currently seeking a Design Engineer II with CREO experience. This position will work with the engineering team and will ensure the successful integration of each design element with the product as a whole. This individual will work both independently as well as part of the larger engineering team. Tasks will include the development of aircraft structural layouts and the design of individual components, assemblies, and installations. Engineering materials will include metals, nonmetals, and composite structural materials. Tasking may also include design and integration of aircraft mechanical systems, hydraulic systems, electrical systems, environmental control systems and a variety of other equipment and systems as needed.

ESSENTIAL JOB RESPONSIBILITIES

The Design Engineer II will work with minimal intervention and must rely on experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas:

Applies standard engineering practices and techniques, including innovative methodology, to provide effective solutions to problems involving a wide number of variables.
Able to ensure the selection and application of materials and processes are appropriate to each design element with the ability to generate and/or revise specifications when necessary.
Compose compliance matrix to meet customer specification requirements.
In-depth knowledge of standard concepts, practices, and procedures within a specified engineering field.
Proficiency utilizing CATIA V5 engineering design software.
Works on problems of complex scope where analysis of situation or data requires a review of identifiable factors to determine appropriate action.
Ability to guide, mentor and advise other design engineering staff.
Creativity and latitude is expected.
Participate in a variety of process improvement projects.
Able to support design reviews with timely and relevant information and understanding.
Performs other duties as required.

EDUCATION AND EXPERIENCES

Requires a BSME, BSCE, BSAE, or a Bachelor’s degree in a related engineering field and a minimum of 5-9 years of experience in the Aerospace Industry or in a related field.
Requires proficiency using CATIA V5 and must be highly competent using MS Office products.
Must understand and apply Geometric Dimensioning and Tolerancing.
Must be proficient in PTC CREO Software.

WHY CHOOSE LMI AEROSPACE?

We take care of our people.

401(k) retirement savings plan with a percentage company-match contribution
Competitive wages
Paid holidays
Paid time off
Medical, dental, vision, life, and accidental insurance
Short-term disability
Long-term disability
Employee assistance plan — for access to counseling, consulting and other community resources
Wellness program
Tuition assistance
Subject to eligibility, terms, and conditions

This job description is only a summary of the typical functions of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. The responsibilities, tasks, and duties may differ from those outlined in the job description and other duties, as assigned, may be required. This document does not create an employment contract. Employees of the Company are employed on an “at will” basis and may be terminated at any time.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer


COPY AND PASTE THE FOLLOWING LINK:
https://lmiaerospace.wd1.myworkdayjobs.com/en-US/LMI_Careers/job/Hurst-TX/Design-Engineer-II_R0005454
 
Job Number: R0005454
Job Location: Everett-WA , San Diego-CA, Hurst-TX
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/06/2018
Last Updated: 11/15/2018
Firm Name: LMI AEROSPACE
Attention: Human Resources
Address: 4838 RONSON CT STE R
City, State: SAN DIEGO, CA 92111
800 Phone: 800/677-7868
Website: www.lmiaerospace.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer III

Description:
LMI is a world-class leader in designing, building and manufacturing aerospace structures, systems and components for commercial, business and regional, and military aerospace customers. We employ engineering, manufacturing and testing experts throughout the United States and the rest of the world. Our integrated team approach and full life cycle of capabilities enable our employees to take advantage of a wide range of opportunities for career growth within our organization.

POSITION SUMMARY

We are currently seeking a Design Engineer III in Reno, NV. This position will provide onsite support to the customer and will be the liaison between the customer and offsite Engineering Services project team. This individual will be required to attend customer meetings, answer customer questions, and deliver important information to the offsite team to ensure a successful integration. This individual will work both independently as well as part of the larger engineering team. Tasks will include the development of aircraft sub-systems layouts and the design of individual components, assemblies, and installations. Tasking will include design and integration of aircraft mechanical systems, hydraulic systems, electrical systems, environmental control systems and a variety of other equipment and systems as needed.

ESSENTIAL JOB RESPONSIBILITIES for Design Engineer III in Reno, NV

The Design Engineer III will rely on extensive experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas:

Applies standard engineering practices and techniques, including innovative methodologies, to provide effective solutions to problems involving a wide number of variables.
Review and understand customer’s Statement of Work (SOW), technical specifications, Interface Control Drawings, schedules and budgets.
Create/compile technical documentation that supports evolving/changing designs.
Able to ensure the selection and application of materials and processes are appropriate to each design element with the ability to generate and/or revise specifications when necessary.
Compose compliance matrix to meet customer specification requirements.
Assist in producing engineering quotes to specifications or customer repair demands.
Create Service Bulletins, Repair Schemes and Service Letters that meet the customers’ modifications or repair needs.
Responsible for communicating with customers and suppliers, translating technical information and ensuring compliance to standards and requirements.
In-depth knowledge of standard concepts, practices, and procedures.
Proficiency utilizing CATIA V5 engineering design software.
Works on problems that are complex in scope where analysis of situation or data requires a review of identifiable factors to determine appropriate action.
Ability to guide, mentor and advise other design engineering staff.
Provide direction and serve as expert resource to other department engineers and management team.
Function as an interface to ensure complete understanding of requirements, goals and constraints.
Document issues and communicate to necessary departments, evaluate potential problems and provide risk assessment. Follow-up to ensure that issues have been successfully resolved.
A wide degree of creativity and latitude is expected.
Participate in a variety of process improvement projects.
Will facilitate or lead teams.
Able to support design reviews with preparation and knowledgeable presentation of review material.
Directs work of others and acts as a lead.
Performs other duties as required.
EDUCATION AND EXPERIENCES for Design Engineer III in Reno, NV

Requires a BSME, BSCE, BSAE, or a Bachelor’s degree in a related engineering field and a minimum of 10+ years of experience in the Aerospace Industry or in a related field.
Requires proficiency using CATIA V5 and must be highly competent using MS Office products.
Strong leadership ability and excellent communication skills are necessary.
WHY CHOOSE LMI AEROSPACE?

We take care of our people.

401(k) retirement savings plan with a percentage company-match contribution
Competitive wages
Paid holidays
Paid time off
Medical, dental, vision, life, and accidental insurance
Short-term disability
Long-term disability
Employee assistance plan — for access to counseling, consulting and other community resources
Wellness program
Tuition assistance
Subject to eligibility, terms, and conditions

This job description is only a summary of the typical functions of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. The responsibilities, tasks, and duties may differ from those outlined in the job description and other duties, as assigned, may be required. This document does not create an employment contract. Employees of the Company are employed on an “at will” basis and may be terminated at any time.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer

COPY AND PASTE THE FOLLOWING LINK:
https://lmiaerospace.wd1.myworkdayjobs.com/en-US/LMI_Careers/job/LMI---San-Diego---Remote-California/Design-Engineer-III_R0005438-1
 
Job Number: R0005438
Job Location: Reno, NV
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/06/2018
Last Updated: 11/15/2018
Firm Name: LMI AEROSPACE
Attention: Human Resources
Address: 4838 RONSON CT STE R
City, State: SAN DIEGO, CA 92111
800 Phone: 800/677-7868
Website: www.lmiaerospace.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineers III

Description:
STS Technical Services is Hiring Design Engineers III in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Job Summary:

The Design Analyst is responsible for the engineering, designing, and drafting of tools, gages, lifting devices, work platforms, tail docks, and fall restraint systems to support maintenance on our ground support equipment, aircraft fleets, components, and engine types throughout company operations.

The Design Analyst must have experience in custom design of machinery, tools and prototypes that ensure full adherence to all safety and compliance regulations and standards.

Job Duties & Requirements:

A broad scope of CAD design capabilities are required including:

The generation of 3-D solid models using Autodesk Inventor or Solidworks
These models are utilized for functions including but not limited to Finite Element Analysis, CNC tool paths, 3-D printing and 2-D manufacturing drawings
Additionally, creative problem solving skills are required and are used to resolve complex repair problems in which a solution is undefined
The Design Analyst is a technical representative of company Tooling Services
A qualified applicant must be able to professionally interact with vendors, engineering firms, fabrication and machine shops, and departmental personnel throughout the company
The Design Analyst must have both Mechanical and Structural skills
The Mechanical element includes the designing of jigs, fixtures and gagging
These tools are designed using manufacturer’s part prints, overhaul manual criteria, authorized repair documents, AD Notes and any other applicable information important to the function of the tool
The Structural element includes the design and analysis of maintenance work stands, tail docks and lifting/handling devices
All structural designs must adhere to all applicable standards such as those set forth by AISC (American Institute of Steel Construction), ANSI (American National Standards Institute), AWS D1.1 (Structural Welding Code) and Delta’s SPM (Safety Policy Manual)
The Design Analyst is also responsible for the review and implementation of OEM tool change bulletins

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 44601
Job Location: Atlanta, GA
Duration: Contract
Input Date: 11/08/2018
Last Updated: 11/15/2018
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Design/Data Integrity Engineer

Description:
Design/Data Integrity Engineer in Structural/Mechanical Engineering for Completions Engineering. Responsibilities primarily involve engineering design, modeling, drafting, and checking of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation. At times this position may also be asked to review design work created using either AutoCAD or CATIA V5 and ensure design standards are consistent with company standards and accepted design methods. Engineering design work includes the creation of drawings/models using either AutoCAD or CATIA V5. Design engineer will employ design standards consistent with company standards and accepted design methods. Design assignments are executed under the direction of a Lead engineer or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head. Experience as Design Checker/Data Integrity a plus.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Thirteen (13) yrs. specific technical discipline or fifteen (15) yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Appleton, WI
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/11/2018
Last Updated: 12/07/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

Designer / Drafter

Description:
PDS Tech, Inc. is seeking a Designer/Drafter for an open position in Santa Fe Springs, CA
 
Responsibilities for this position include:
  • Developing and maintaining all Facility drawing packages.
  • Developing and maintaining system and sub-system drawing packages.
  • Developing and maintaining engineering manufacturing drawings associated with site.
  • Incorporating redlines into existing drawings in multiple CAD systems.
  • Working with minimal supervision after initial orientation.
  • Creating and revising site layouts, detailed parts, assemblies, and manufacturing engineering drawings from existing basic layouts, external references, and standard data residing in-house and in public databases to develop final drawings of site, devices, mechanical and piping (P&ID’s) utilizing computer-aided design (CAD).
  • Completing new and revision detailing of model designs into layout drawings possibly prepared by others in accordance with standard engineering drafting practices on site.
  • Determining scaling; inserts, necessary reference planes, centering and dimension lines, hidden line interpolations, and sectioning for parts, assemblies; preparing complete production detail drawings.
  • Contributing design modifications to improve quality of product or facilitate manufacturing operations.

Qualifications
  • High School Diploma with a minimum of 3 years Design/Drafting experience / Associates Degree with a minimum of 5 years Design/Drafting experience (preferred)
  • 2 – 5 years’ experience in Design/Drafting using Inventor 2015 version or higher
  • 2 – 5 years’ experience in Design/Drafting using Autocad 2015 version or higher
  • Full understanding of GD&T, version ASME Y14.5M-1994.
  • Experience with CADKEY 1999
  • Experience with NX 8.5.3 or higher
  • Experience with TeamCenter PLM system
  • Familiar with basic parametric modeling
  • Proficient in Office 2010 version or higher (Excel, Work, Outlook, Power Point)

 
Job Number: 1810087495
Job Location: Santa Fe Springs, CA
Per Diem: No
Duration: 12 months
Input Date: 06/11/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mXvIAAU&URLSource=cjhunter

Designer, Bleed Air Systems/Vapor Cycle Systems

Description:
General Summary: 
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.
 
Duties and Responsibilities:

  • Prepare 3D layout models of the BAS and VCS.
  • Prepare 3D installation and detail models of the BAS and VCS.
  • Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
  • Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:

  • Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Education, Work Experience, Certification and/or Licensure:



  • Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

 
Knowledge, Skills and Abilities:


  • Experience using CATIA V5 to prepare 3D parametric models and 2D drawings.  Minimum of 10,000 hours.
  • Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
  • Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.

 
Job Number: 1810094374
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 10/31/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qwfoQAA&URLSource=cjhunter

Designer, Structures - Wing & Fuselage

Description:
PDS Tech is currently recruiting for a long term contract in Greensboro, NC for a Structures Engineer in Wing or Fuselage.
General Summary:

Structures Designer Engineering will serve in a design role and be responsible for conceptual design developing drawings and supporting documents i.e. parts list checklist, E0s. Will support design reviews and PDRs/CDRs.

Duties and Responsibilities:

  • Generates engineering models, drawings, parts list and E0 utilizing CATIA V5
  • Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
  • Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development.
  • Familiarity with structural analysis methods, load paths, and material properties
  • Manages task execution to ensure on-time and on-target completion
  • Perform tolerance and deviation studies. Define detail parts dimensional requirements to meet final design intent.
  • Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producibility
  • Working knowledge of metallic aircraft construction including primary structure, materials processes and tooling.
  • Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions

Education, Work Experience, Certification and/or Licensure:



  • Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
  • Experience in primary and secondary structural design including Wing or Fuselage
  • Must possess a minimum of 2000 hours of experience with CATIA V5 

Knowledge, Skills and Abilities:

  • Knowledge of AMSE Y14.5 dimensioning and tolerancing
  • Possess strong communication skills both verbal and writing skills conducting presentations to internal and external customers
  • Experience with Catia V5
  • Working knowledge of full life cycle drawing approval process including communication with manufacturing, stress, CM, and quality
  • Proficient in Microsoft Office Products

Physical Requirements:

  • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  • Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  • Read, hear, speak, and see with no restrictions, as required by job duties.
  • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  • Effectively communicate in Business English language.
  • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50Ibs or more during the work shift, with the use of Company provided "reach assistance technology" or "movement assist technology" (fork-lifts, pallet jacks, pulleys, dolly's, robotics reach equipment, people movers etc.), as required by job duties.

 
Job Number: 1810086435
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 07/24/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mTmFAAU&URLSource=cjhunter

Designer, Structures - Wing & Fuselage

Description:
General Summary:
Structures Designer Engineering will serve in a design role and be responsible for conceptual design developing drawings and supporting documents i.e. parts list checklist, E0s. Will support design reviews and PDRs/CDRs.  This is a DIRECT position.

Duties and Responsibilities:

  • Generates engineering models, drawings, parts list and E0 utilizing CATIA V5
  • Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
  • Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development.
  • Familiarity with structural analysis methods, load paths, and material properties
  • Manages task execution to ensure on-time and on-target completion
  • Perform tolerance and deviation studies. Define detail parts dimensional requirements to meet final design intent.
  • Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producibility
  • Working knowledge of metallic aircraft construction including primary structure, materials processes and tooling.
  • Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions

Education, Work Experience, Certification and/or Licensure:



  • Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
  • Experience in primary and secondary structural design including Wing or Fuselage
  • Must possess a minimum of 2000 hours of experience with CATIA V5 

Knowledge, Skills and Abilities:

  • Knowledge of AMSE Y14.5 dimensioning and tolerancing
  • Possess strong communication skills both verbal and writing skills conducting presentations to internal and external customers
  • Experience with Catia V5, TeamCenter
  • Working knowledge of full life cycle drawing approval process including communication with manufacturing, stress, CM, and quality
  • Proficient in Microsoft Office Products

Physical Requirements:

  • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  • Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  • Read, hear, speak, and see with no restrictions, as required by job duties.
  • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  • Effectively communicate in Business English language.
  • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50Ibs or more during the work shift, with the use of Company provided "reach assistance technology" or "movement assist technology" (fork-lifts, pallet jacks, pulleys, dolly's, robotics reach equipment, people movers etc.), as required by job duties.

 
Job Number: 1810087974
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 07/03/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002ma7HAAQ&URLSource=cjhunter

Dimension Control Technician/Laser Tracker Systems 3

Description:
PDS TECH INC. is seeking Dimension Control Technician/Laser Tracker Systems 3 located in Palmdale,CA.

Summary:

 Position requires Assembly Tooling and or composite tooling background with assorted Computer-Aided Measurement Systems (C.A.M.S.) and an emphasis on (FARO-LEICA) Laser Tracker Systems.
This position requires the willingness to train lesser qualified personnel in the use of sophisticated Metrology equipment with model based

graphical interfaces. 
Experience in data collection for the Validation/Verification of Tooling and Engineering.
This position requires experience working with Manufacturing Engineering developing solutions to highly complex mechanical problems.
Also working with Engineering for dispositions and best methodology to make repairs.
Analyze and advise on data results.
Must be proficient in Microsoft suite. Ability to work on high ladders and portable platforms, heavy lifting as well as standing for long periods of time.
Candidate may be required to work any shift as well as overtime as necessary.
High school diploma or equivalent required.
Working knowledge of Photogrammetric laser radar systems and laser scanning systems.
Computer aided graphic interfaces such as Verisurf X, SA, Polyworks and Maya matrix Build!IT.

Basic Qualifications:



High school diploma plus 4 years of related experience.



 



Team player with excellent communication skills




Assembly Tooling and or composite tooling background with assorted Computer-Aided Measurement Systems (C.A.M.S.) and an emphasis on (FARO-LEICA) Laser Tracker Systems and Romer absolute arms   



 



Must be proficient in Microsoft suite.



 



Ability to work on high ladders and portable platforms, heavy lifting as well as standing for long periods of time. 



 



Computer aided graphic interfaces such as Verisurf X, SA, Polyworks and Maya matrix Build!IT.




Preferred Qualifications:



Familiar with multiple computer aided metrology systems such as laser trackers, articulated arms, scanners and 6DoF (Six Degree of Freedom) etc. Also prefer some experience in computer aided graphic interfaces such as Verisurf X, Polyworks and Maya matrix Build!IT. Preferred experience in the ability to analyze collected data to computer models using CATIA V5.


 
Job Number: 1810085884
Job Location: Palmdale, CA
Duration: 0 months
Input Date: 09/11/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jonas Lindner
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mS6FAAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Doors Design Engineer

Description:
Responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.

Education, Work Experience, Certification and/or Licensure:
1. BS in Mechanical Engineering with a minimum of 10 years directly related experience designing aviation systems; experience can be substituted for the lack of an appropriate degree
2. Some Travel may be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.
 
Job Number: 28-027
Job Location: Greensboro, NC
Rate: Up to $60/hr, DOE
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 05/25/2018
Last Updated: 11/14/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

ECS & Ice Protection Design Engineer

Description:
PDS Tech is seeking an Ice Protection Design Engineer in Wichita, KS

Responsible for design, development, and certification in the area of systems for new and existing 14 CFR Part 23/25
Responsible for development and documentation of system architecture, system requirements, system schematics and computer simulations, coordination of system test article fabrication and/or validation of initial design through physical test, and certification documentation of aircraft hydraulic systems.
Prepare certification plans, conformity requests, equipment qualification test plans/results, system safety documents, ground and flight test plans/results and certification reports. Reviews engineering drawings for systems prepared using computer based drafting tools (CATIA/CCD and/or CATIA V5).Supplier coordination and review of supplier engineering documents. Troubleshooting activities in both production and field environments.
Support investigation, root cause analysis, corrective action, and ODA/FAA coordination of aircraft field issues and component failures when warranted for certification concerns.
Required: 

o 3+ years of related experience in the design, development and testing of Environmental Control Systems and/or Ice Protection systems on fixed wing aircraft 

o CATIA fluent for preparation of layouts, trade studies, kinematic models, and engineering drawings 

o Aircraft aluminum structure design; familiar with typical fabrication and assembly processes (forming, machining, fastening, etc.) 

o Aircraft mechanical system design 

o Preferred: CATIA V6 and Enovia experience
 
Job Number: 1810090601
Job Location: Wichita, KS
Duration: 12 months
Input Date: 10/26/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mkd4AAA&URLSource=cjhunter

ECS & Pneumatic Subsystems Engineer

Description:
Seeking an ECS & Pneumatic Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Environmental Control System (ECS), Cabin Pressurization, Oxygen System, Anti-Ice System and Bleed Air Management for a supersonic business jet. The successful candidate will manage the ECS & Pneumatic systems design and system suppliers, as well as all design and certification activity required.

Duties include, but are not limited to:
• Develop ECS & Pneumatic systems design, architecture and product plans, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of ECS & Pneumatic systems
• Define requirements for the ECS & Pneumatic systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of ECS & Pneumatic systems requirements
• Perform ECS & Pneumatic systems tests and certification, and provide system and certification documentation
• Manage the ECS & Pneumatic subsystem scheduling, budget, resources and suppliers
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort.
• She/he will prioritize the allocation of the ECS & Pneumatic resources to meet the milestones of the program schedule, from concept through certification.

Minimum Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure/confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in ECS systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing ECS systems from concept through certification strongly desired
• Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
 
Job Number: 42-001
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 12/03/2018
Last Updated: 12/10/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

ELECTRONICS DESIGN ENGINEER

Description:
JSG is seeking an Electronics Design Engineer for our Aerospace Client in Glendale, CA.
LOCAL CANDIDATES ONLY - Direct Hire

Work as part of a world-class, multi-disciplinary team to develop ruggedized electronic products incorporating embedded microprocessors, and transition them into production for aerospace, military, sub-sea, and other harsh-environment applications.

Job Description:

Work from Marketing Requirements to develop electronic hardware designs incorporating embedded microprocessors responsive to the requirements, including
Product design architecture
parts and vendor selection
detailed hardware design and schematic generation and capture in PADS
preliminary parts layout for fit checks
work with PCB layout design team and PCBA vendors
work with mechanical design team
develop firmware/scripts/applications to test hardware
Debug and troubleshoot new designs
Execute functional verification of electrical subsystems
Support manufacturing for all designs including microprocessors, including
Work with Test Engineering to develop appropriate acceptance test stations in production
Troubleshoot problems in production and at customer sites
Work with Product Marketing and Business Development to prepare responses to customer Requests for Proposals
Customer specification review
Preliminary design concepts
Estimate engineering effort to execute designs and firmware/software
Preliminary bill of materials and costing
Basic Qualifications

Bachelor’s degree in Electrical Engineering, Computer Science, related filed or equivalent experience
10+ years overall experience in hardware design
High level of expertise in embedded microprocessor design and programming (C/C++, etc.)
Experience with Ethernet product design (10/100/1000BASE-T interfaces, PHYs, unmanaged switches.) 10GBASE-T interface experience a plus.
Skilled in the design and use of common I/O protocols (I2C, USB, JTAG, Ethernet).
High level of experience with hands-on troubleshooting and turn-on of new circuitry, including test bench equipment such as multi meters, DAQs, spectrum analyzers, JTAG and ICE probes, software, oscilloscopes, etc.
Experience in qualifying embedded systems to MIL-STD-810 MIL-STD-461 or IEC equivalents
Experience in failure analysis and troubleshooting skills in a production and R&D environment
Experience with prototyping solutions and bench testing methodology
Experience with test automation with background in scripting
Excellent technical writing skills and experience writing hardware, software, and interface requirements along with qualification test plans and procedures.
Able to handle ITAR data. Must be US Person or have Green Card.

Preferred Qualifications

Experience with military systems with battery charging, embedded protocol transceivers, microprocessor and FPGA-based systems
Experience with Ethernet product design and testing (Ethernet switch ICs, fiber-optic media converters, etc.)
Experience with digital video systems testing
HD-SDI, 3G-SDI, HDMI, DVI, DisplayPort
 
Job Number: 368920
Job Location: Glendale, CA.
Per Diem: No
Overtime: possible
Duration: Direct
Start Date: ASAP
Input Date: 10/03/2018
Last Updated: 12/09/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

EMBEDDED SYSTEM ENGINEER

Description:
JSG is hiring an Embedded System Engineer for a 15+ months contract opportunity in Stratford, CT!

Description:

Ground Test Engineer - Supports, performs, and manages a specific function within a larger mechanical system, often including hardware and mechanical parts.
Responsible for projects with significant scope and complexity covering all aspects of Ground Testing helicopter components and systems.

Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.
Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports.
Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems.

This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.
Test programs typically involve full scale fatigue and static evaluations of dynamic components, main and tail rotor whirl tests, airframe static tests, airframe shake tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight.
Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft, and oversight of supplier performed component qualification efforts.
 
Job Number: 368042
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 08/31/2018
Last Updated: 12/09/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

ENGINEERING GROUND TEST LABORATORY TECHNICIAN

Description:
Engineering Ground Test Laboratory Technician

Stratford, CT

15+ Months Contract Opportunity



Structural lab technician capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.

Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
Must possess skills and aptitude to operate test facilities and data acquisition systems.
 
Job Number: 367128
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 08/31/2018
Last Updated: 12/09/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

Electric System Component Outfitting Interface Engineer

Description:
This position is located in Nagoya, Japan.

Electric system component outfitting interface engineer
  • Mechanical/ structural interface engineering expertise
  • Willing to be a leading engineer rather than just a manager or an advisor

  • 10+ years experience 
  • Bachelors Degree in Engineering
  • International experience desirable. 
  • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

 
Job Number: 1610044922
Job Location: Nagoya,
Duration: 36 months
Input Date: 09/05/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Ryan Bushey
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i5000000037FjAAI&URLSource=cjhunter

Electrical Design Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

1) AutoCAD required, Catia V5and CHS preferred
2) Electrical system design experience preferred
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design
8) Familiarity with aircraft STC procedures preferred.
9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required
 
Job Number: 24-288
Job Location: Savannah, GA
Rate: $68/hr
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 12/03/2018
Last Updated: 12/10/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Electrical Design Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1) AutoCad required, Catia V5and CHS preferred
2) GV,GVI, and GVII electrical system design experience preferred.
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design
8) Familiarity with aircraft STC procedures preferred.
9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 9857
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/24/2018
Last Updated: 12/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Electrical Design Engineer

Description:
Are you looking for an exciting career opportunity as an Electrical Design Engineer?  Please reach out to Pam at:  pzack@pdstech.com or call her at 480.212.0849

Description:  
Analog Design Engineer
 
Experienced Electronics Engineer to provide technical expertise and project planning support to develop new product lines and to support existing group product lines with design engineering related functions.
 
This position requires experience interacting with customers and working in a team environment. 
 
Key Responsibilities:



  • Provide Analog Design and Analysis expertise utilizing Cadence Simulation tools. 
  • Provide leadership in and conduct activities associated with new product development as it pertains to design, documentation, engineering analysis, product design, drawing preparation, and Design Reviews as well as support of business development (marketing) activities.  
  • Provide leadership in and conduct activities associated with support of existing product manufacturing efforts as it pertains to design, documentation, and general support of inspection processes, manufacturing processes and test processes and cost reduction activities to include engineering analysis, product design, drawing preparation, cost estimation, and product planning.  
  • Provide technical support and guidance (mentoring) to junior engineers, to include review and critique of design documentation, development plans, test plans, and test results. 
  • Provide leadership of failure investigation activities through application of rigorous root cause analysis. 
  • Provide project design support of Internal Research and Development (IRAD) activities, as well as providing engineering leadership and conducting design engineering tasks related to those activities. 
  • Assist in design and development of manufacturing tooling and test equipment. 
  • Prepare reports and presentations related to design and development activities, including technical proposal submittals, test plans and reports. 
  • Support kaizen-related process improvement activities.

 
Qualifications:

  • Bachelor of Science Degree in Electronics Engineering; Advanced degree a plus. 
  • Minimum of five years of experience in design-related engineering position. 
  • Experience developing and integrating electronic assemblies into product designs preferred.  This includes leveraging the entire value chain from supplier through final factory manufacturing operations. 
  • Experience with EMI/EMC compliance. 
  • Experience with DOE, FMEA, PFMEA, Six sigma or similar analysis tools. 
  • Experience with government specifications and industry standards related to safety critical electronics a plus. 
  • Advanced skill level in Microsoft Office (Word, Excel, Access, and PowerPoint). 
  • Intermediate skill level in Microsoft Project and Visio preferred. 
  • Advanced skill level in Analog Simulation, preferably with Cadence PSPICE. 
  • Strong Analog background with High Power, High Voltage experience a plus. 
  • Experience performing Stress Analysis and Thermal Analysis.
  • Demonstrated ability to apply mathematics, science, and technology in product design and complex problem solving 
  • Superior written and oral communication skills.

 
 This is a Direct Hire position with opportunity for growth! 




 
Qualifications:  
  • Bachelor’s Degree- Mechanical, Aerospace or Electrical Mechanical.  Advanced degree a plus
  • 5 years’ experience in design; preferably in related field.
  • Design experience- plan to production is a must. 
  • 2 years participation in cross functional team while developing products is preferred.
  • Presentation skills are required. 

 
Job Number: 1810089190
Job Location: Hollister, CA
Duration: 0 months
Input Date: 08/01/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mfR8AAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
AutoCad required, Catia V5and CHS preferred. 14 CFR 25 Subpart H - EWIS experience preferred. Part 25 Certification Experience for Cabin Interiors preferred. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. Experience with power distribution, lighting, switching, sizing and routing. 7) Familiarity in mechanical system design. Familiarity with aircraft STC procedures preferred. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.
 
Job Number: 18-140257
Job Location: Southeast
Per Diem: Split
Overtime: Possible
Duration: Year +
Start Date: ASAP
Input Date: 11/27/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: Windsor Locks, CT
Pay Rate: $58/hr
Duration: 1 year contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**NO RELOCATION COMPENSATION**

Description:
-Manages a team and provides direction development, design, and testing of electrical components, particularly motors and sensors for manned space applications. This will included extensive supplier technical management.
-Project Engineering Supplier Designed Equipment (SDE) Integrated Product Development (IPD) Team Lead will provide continuous support of NASA’s vision to develop and expand science capabilities aboard the ORION Program for the next decade. Manned Space capabilities are enabled by the life support hardware and engineering services provided by the ORION program in Windsor Locks, CT.
-The successful candidate will be responsible for leading the IPD teams consisting of Systems Engineering, Test Engineering, Mechanical/Electrical Design, Supplier Quality, Materials Engineering, Manufacturing Engineering, Material Planners, and Purchasing to coordinate the manufacture, qualification, and delivery of various Environmental Control and Life Support System (ECLSS) components by working closely with the supply base to drive the design of these components by following the SDE Engineering Standard Work processes according to the approved budget and schedule.
-Familiarity with Earned Value Management System (EVMS), DOORS, SAP, and UTAS Engineering Change System are a plus. The SDE IPD team lead will report directly to the Program Engineering Manager and Program Managers, and will play a critical role in driving project execution while meeting both internal and external customer expectations. Detailed coordination with the Program Office will be required in managing the suppliers and the IPD Team. Participation and preparation for monthly program and design reviews with Lockheed Martin are also required. This position requires creation and delivery of technical presentations to management and customers.

Additional Job Details:
*Education / Certifications
• BA/BS degree in Science, Technology, or Engineering w/ 5+ years of experience is required - Graduate degree preferred.
• 4+ years leading teams and managing projects *Experience/Qualifications Prior experience working with or managing multi-disciplinary teams in a fast paced environment
• Excellent verbal, written and interpersonal communication skills
• Experience and familiarity with new product introduction and product life cycle from concept to qualification (preferably leading new supplier design and development efforts for motors, actuators, and sensors including various system integrations)
• Natural presence/comfortable presenting to internal and external customers
• Demonstrated command of RRCA methodology and tools
• Ability to bring team members together and work problems to resolution
• Ability to work independently and as part of a team
• Proven planning, adaptability, organizational and negotiation skills for effective team management
• Ability to anticipate project risks and build contingency plans
• Manage hardware contracts from stages of proposal through delivery, including tracking procurement status, establishing engineering and operations efforts, and oversight of assembly and test progress.
• Interface with both internal operations and engineering functions to facilitate assembly, test, and delivery of hardware.
• Participate in weekly/monthly reviews with Lockheed customer to communicate status of contracts and schedule.
• Provide direction to IPT (Integrated Product Team) for actions on in-process hardware.
• Develop and manage program schedules to drive on-time contract deliveries.
• Participate in contract proposals, including BOE and BOM estimates.
• Provide quarterly sales support to Program Management through effective supplier invoicing plans and strategies
• Utilize Earned Value methodology to forecast program demands and track project completion.
• Process engineering changes to ensure high quality, conforming hardware is being received, built, and delivered to our customers
• Project Management Professional (PMP) certification is a plus.
• US Citizen
 
Job Number: 9973
Job Location: Windsor Locks, CT
Rate: 58
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/16/2018
Last Updated: 11/21/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Engineer

Description:
PDS TECH INC. is seeking  Electrical Engineer in Tewksbury, MA
 
The primary responsibilities will be the development and implementation of test capabilities leveraging a strong working knowledge of test equipment hardware and software technologies. This is an excellent position for a test equipment engineer who has a background in digital test, analog test, RF test, or power supply test and a desire to apply those skills to combined hardware/software test solutions.You will be joining a diverse project team for the design and development of test equipment and test solutions for testing radar, sonar, communication, missile, combat control systems, subsystems and components for various programs within IDS. These products can contain Analog, RF, Microwave, Acoustic, High Power, and Digital Electronic technology and can also have Software (embedded, firmware, Signal Processing, VHDL, etc.). Test Development Engineers are involved from the beginning of product design as a concurrent engineering effort, continuing into supporting engineering design verification testing, production test and final system level verification and sell-off; includes in-plant or field testing. Typical test solutions include simulation, stimulation and data acquisition capability to provide stimulus and response test environments for verifying functional performance. Typical test systems encompass Hardware In the Loop Stimulators, Custom Automatic Test Equipment, Commercial Automatic Test Equipment, High Power, Mixed-Signal, Digital and Environmental Stress Screening systems, mechanical holding fixtures, adapters, and interface cabling and harnessing. .

Basic Qualifications: B.S. in Electrical Engineering or Computer Engineering or B.S. in Electronic Engineering Technology8+ years’ experience in engineering design and development environment with 4+ years direct exposure to Test Equipment  Design and Development tasks U.S. Citizenship is required Desired Qualifications: Digital, and/or Analog, and/or RF, and/or power supply test hardware design experienceUse of Commercial Test and Measurement EquipmentVXI/VME/MXI/PXI/CompactPCI Application DevelopmentCMMI and 6 Sigma ExperienceStrong interpersonal and communication skillsGood decision-making and problem-solving skillsExperience with VHDL a plusSoftware applications / programming skills a plusAbility to obtain a security clearanceKeywords: Test Equipment Design and Development, Digital, Analog, RF, power supply test, hardware design, clearance 
 
 
Job Number: 1810089990
Job Location: Tewksbury, MA
Duration: 12 months
Input Date: 09/04/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Michael Accunzo
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002miceAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Motor Design Management)

Description:
PDS Tech, Inc. is seeking an Electrical Engineer to manage Motor Design in Windsor Locks, CT.

The ideal candidate will manage a team and provide direction development, design, and testing of electrical components, particularly motors and sensors for manned space applications. This will include extensive supplier technical management.

The ISR & Space Systems business has contributed to significant advances in ground, air, space and imaging technology for over 85 years. Within ISR & Space Systems we design and manufacture Environmental Control and Life Support Systems on the International Space Station, including the space suit, and undersea in submarines.

Project Engineering Supplier Designed Equipment (SDE) Integrated Product Development (IPD) Team Lead will provide continuous support of NASA’s vision to develop and expand science capabilities aboard the ORION Program for the next decade. Manned Space capabilities are enabled by the life support hardware and engineering services provided by the ORION program in Windsor Locks, CT.

The successful candidate will be responsible for leading the IPD teams consisting of Systems Engineering, Test Engineering, Mechanical/Electrical Design, Supplier Quality, Materials Engineering, Manufacturing Engineering, Material Planners, and Purchasing to coordinate the manufacture, qualification, and delivery of various Environmental Control and Life Support System (ECLSS) components by working closely with the supply base to drive the design of these components by following the SDE Engineering Standard Work processes according to the approved budget and schedule.

Familiarity with Earned Value Management System (EVMS), DOORS, SAP, and UTAS Engineering Change System are a plus. The SDE IPD team lead will report directly to the Program Engineering Manager and Program Managers and will play a critical role in driving project execution while meeting both internal and external customer expectations.

Detailed coordination with the Program Office will be required in managing the suppliers and the IPD Team. Participation and preparation for monthly program and design reviews with Lockheed Martin are also required.

This position requires creation and delivery of technical presentations to management and customers.

Education / Certifications
•BA/BS degree in Science, Technology, or Engineering w/ 5+ years of experience is required - Graduate degree preferred.
•4+ years leading teams and managing projects

Experience/Qualifications
•Prior experience working with or managing multi-disciplinary teams in a fast paced environment
•Excellent verbal, written and interpersonal communication skills
•Experience and familiarity with new product introduction and product life cycle from concept to qualification (preferably leading new supplier design and development efforts for motors, actuators, and sensors including various system integrations) Natural presence/comfortable presenting to internal and external customers
•Demonstrated command of RRCA methodology and tools
•Ability to bring team members together and work problems to resolution
•Ability to work independently and as part of a team
•Proven planning, adaptability, organizational and negotiation skills for effective team management
•Ability to anticipate project risks and build contingency plans
•Manage hardware contracts from stages of proposal through delivery, including tracking procurement status, establishing engineering and operations efforts, and oversight of assembly and test progress.
•Interface with both internal operations and engineering functions to facilitate assembly, test, and delivery of hardware.
•Participate in weekly/monthly reviews with Lockheed customer to communicate status of contracts and schedule.
•Provide direction to IPT (Integrated Product Team) for actions on in-process hardware.
•Develop and manage program schedules to drive on-time contract deliveries.
•Participate in contract proposals, including BOE and BOM estimates.
•Provide quarterly sales support to Program Management through effective supplier invoicing plans and strategies
•Utilize Earned Value methodology to forecast program demands and track project completion.
•Process engineering changes to ensure high quality, conforming hardware is being received, built, and delivered to our customers
•Project Management Professional (PMP) certification is a plus.
•US Citizen
 
Job Number: 1810093767
Job Location: Windsor Locks, CT
Overtime: yes
Duration: 1 year
Start Date: ASAP
Input Date: 11/07/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Electrical Engineer (Software Development) - (Renton)

Description:
Required qualifications:
• Electrical Engineering experience with an emphasis in software development
• Experience working with two or more of the following: web application development, mobile application development, object oriented design and analysis, networking, unit testing, systems administration, and/or developing large software systems
• Experience with hardware and software configuration management
• Familiarity with and the ability to program with Visual Basic and C#
• This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Typical Education & Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.


Preferred qualifications:
• Critical technical skills include proficiency in airplane digital signals and low voltage data acquisition
• Ability to create and update drawings with Auto Cad and/or Autodesk inventor
• Experience with digital data busses such as ARINC 429/717.
• Experience with aviation connector interfaces and packing such as ARINC 600.
• Knowledge of web design and maintenance
• Experience programming PLCs and HMIs
• Experience with National instruments Lab Windows CVI.
• Experience with equipment configuration control through Version Description Documents and/or Equipment Documents
• Experience using aviation interfaces such as synchros, resolvers, Linear Variable Displacement Transducers (LVDTs) and variable reluctance proximity sensors
Bachelor of Science degree in one of the following areas is highly preferred
Aeronautical Engineering
Aeronautics & Astronautics Engineering
Aeronautical Engineering Technology
Chemical Engineering
Civil Engineering
Aerospace Engineering
Electrical Engineering Technology
Manufacturing Engineering
Manufacturing Engineering Technology
Mechanical Engineering
Manufacturing Systems Engineering
Material Sciences and Engineering
Industrial & Systems Engineering
Mechanical Engineering Technology
Electrical Engineering
Metallurgical and Materials Engineering
Plastics Engineering
Plastics Engineering Technology
Structural Engineering

Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: EERenton
Job Location: Renton, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 10/23/2018
Last Updated: 12/07/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: janice.plattner@acsicorp.com
Website: www.acsicorp.com

Electrical Power Generation and Distribution Engineer

Description:
• Electrical Power Generation and Distribution Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Electrical Power Generation and Distribution Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Electrical Power Generation and Distribution design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-007
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 12/03/2018
Last Updated: 12/10/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: Matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/31/2017
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

Electrical Technician - Level 2 - Secret

Description:
PDS Tech, Inc, is seeking an Electrical Technician Level- 2, in Orlando, FL.
Job Description: 

  • Electronics Technician qualified and trained to support electrical/mechanical fabrication and limited testing associated with aerospace related or comparably critical systems.
  • Tasks include cable / harness fabrication, surface mount and thru-hole soldering, test box layout (including drilling / punching boxes to accept connectors, test points, etc.).
  • Candidate will support multiple missile and fire control programs

Mandatory Skills:
  • Must have active secret clearance with investigation within the last 6 years
  • Must be a detailed worker, capable of following written and oral instructions from engineering drawings and other inputs.
  • Candidate must be able to pass company provided solder and harness fabrication training.
  • Candidate must have prior surface mount soldering experience



Desired Skills:

  • Familiarity with cable/harness fabrication, manual soldering (SMT and Thru-Hole), test box layout (including drilling/punching boxes to accept connectors, test points, etc.) is desired.
  • Knowledge and use of basic test equipment such as multimeters as well as basic AC/DC circuitry is preferred.
  • Related military experience and previous company experience is a plus.
  • IPC-620, IPC-610 and J-STD-001 certification highly desirable. 



 
 
Job Number: 1810089606
Job Location: Orlando, FL
Duration: 12 months
Input Date: 10/19/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Alec Merriman
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mhQgAAI&URLSource=cjhunter

Electrical Technician Level 2 - CA

Description:
Chipton-Ross is seeking an Electrical Technician Level 2 for an opening in Santa Barbara, CA.

RESPONSIBILITIES:
Provides engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors

REQUIRED EXPERIENCE:
Experienced integrated circuit technician to help advance the state of the art in infrared and visible imager readout integrated circuits (ROICs). Significant experience with physical layout of mixed signal VLSI CMOS transistor level designs is required. The selected candidate will perform silicon layout of analog and digital submicron transistor level designs in support of advanced infrared cameras and imagers. Designs include ultralow noise analog circuit blocks, low power analog to digital conversion, high speed multi GHz data transmission and serializers. MUST HAVE CMOS integrated circuit layout experience

PREFERRED EXPERIENCE:
Schematic capture, design verification and simulation.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
4/10, Monday-Thursday 3:00 pm - 01:30 am
Full-Time


 
Job Number: 173751
Job Location: Santa Barbara, CA
Rate: Up to $45.00 DOE
Duration: 12 Months
Input Date: 09/07/2018
Last Updated: 12/13/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

Electro/Mechanical Design Engineer

Description:
-Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
-Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
-Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
-Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T
 
Job Number: 0878
Job Location: Multiple
Rate: 50-80/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months plus
Start Date: 2/3 wks
Input Date: 05/29/2018
Last Updated: 12/13/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ElectroMechanical Engineer III

Description:
We are seeking an Electro-Mechanical Engineer in Texas! Read below for more information on this position and submit your resume if you qualify!

The ideal candidate for this position will perform the following tasks:
* Responsible for missile harness design and 3D routing and general packaging support.
* Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. Research, development and design of components, equipment and networks for military applications.
* Responsible for interfacing with electrical engineers in interpreting system interconnect diagram(s), harness schematics, and providing guidance for improving the layout based on best physical routing practices.
* Responsible for harness piece-part/component selection to meet interfacing hardware and environmental requirements.

Mandatory Qualifications and Experience:
* Requires 5 or more years of electro-mechanical design experience of airborne avionics, missile and/or ground-based equipment.
* Design experience should include electrical cable and/or network design and general electro-mechanical design.
* Must have experience with cabling/harness design.
* Must be proficient with the Pro/Cable module in Creo, have good communication skills, and be able to work with internal and external customers.
* The ability to work with minimal oversight.

Desired Qualifications and Experience:
* Knowledge of company procedures in CAD modeling
* Working knowledge of military and/or industry hardware specifications

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129195
Job Location: gr, TX
Duration: 11 mos
Start Date: 11/26/2018
Input Date: 11/02/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

Electromechanical Technician / no clearance CA

Description:
163555
Electromechanical Technicians (Job Number: 18023262)

Number of Openings: 6

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Nov 12, 2018

Target End Date: Nov 1, 2019

Targets: 6**

Work Week: 9/80

Location: Redondo Beach, CA

Pay rate: $27.00 - $32.00

Duration of Assignment: Up to 1 year

Clearance: None


PRIMARY DUTIES AND RESPONSIBILITIES:
Under close supervision, performs routine technical functions related to the support of development engineering activities such as design, test, checkout, fabrication, modification, and assembly of electronics and Electro-mechanical systems, experimental design circuitry, prototype models or specialized test equipment. Applications may include analog, digital and/or video type circuits and logic systems. Guidance is readily available from superiors. Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform routine testing, checkout, troubleshooting, prototype building, environmental testing, and simple developmental engineering tasks. Performs routine operational tests and fault isolation on development systems and equipment to ensure conformance with design specifications. Diagnoses and isolates malfunctions down to component level. Conducts defined engineering tests and collects data as assigned. Utilizes routine development or diagnostic equipment including oscilloscope, VOM, DVM, signal generators and similar test apparatus. Normally assigned in area such as development, engineering, test equipment design, or the like. Excludes those assigned to production test activities. Entry Level. Excludes trainees with no academic preparation or experience.

EXPERIENCE and TRAINING:
Electronics training equivalent to 2 years technical trade school or military technical school.


Basic Qualifications:

High School diploma or equivalent and 2 years additional education and/or related experience.


Preferred Qualifications:

2 years military or applicable experience is preferred
 
Job Number: MB-1695
Job Location: Redondo Beach, CA
Rate: 32/hr max
Per Diem: no
Duration: 1 year
Input Date: 12/12/2018
Last Updated: 12/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 04/07/2017
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

Electronics Assembly Technician (6) - OH

Description:
Chipton-Ross is seeking an Electronics Assembly Technician (6) for an opening in Mason, OH.

RESPONSIBILITIES:
The Electronics Assembly Technician will perform the mechanical assembly of space avionic boxes using various types of hardware and tools. The Assembly Technician fabricates Circuit Card Assemblies (CCA) and cable wire harnesses, conformal coating, and soldering.
Perform mechanical assembly using various types of hardware and tools.
Use lean manufacturing concepts in assembling product.
Maintain configuration control on all product assembled.
Maintain control over material being used in the fabrication process.
Solder (Leaded and Surface Mount Components) on CCA's.
Perform other duties as assigned.

REQUIRED EXPERIENCE:
Prior manufacturing experience is preferred; electronics experience is a preferred.
Ability to follow work instructions and read mechanical drawings.
Basic computer skills including familiarity with Excel.
Strong written and interpersonal skills, such as communicating well with customers, management, engineering and manufacturing as well as other disciplines of the organization.
Strong planning/organizational skills with ability to prioritize work assignments.
Ability to work individually and in a team oriented environment.
Able to attain J-STD-001 solder certification within 30 days subject to class availability.

EDUCATION:
Accredited High School Diploma/GED, Associates Degree in a technical or engineering field is preferred.

WORK HOURS:
9/80, 1st Shift
Full-Time


 
Job Number: 174067
Job Location: Mason, OH
Rate: $16 to $18.00 DOE
Duration: 4 Months
Input Date: 09/24/2018
Last Updated: 12/13/2018
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Packaging Engineer UG/NX NY

Description:
Request number: 5654
Job title: Electronics Packaging Engineer
Number of openings: 1

Position location: East Aurora - NY
Employment type: Contract
OT exempt: No

Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Maximum Hourly Pay Rate: 53
Start Date: 10/22/2018
Tentative End Date: 10/21/2019

Electronics Packaging Engineer

Essential job functions:
This is a mechanical design engineering position within an EE design function. It entails the mechanical packaging of electronic circuits and related hardware.

Specific requirements are as follows:
-Experience with the packaging of electronics systems intended to be used in severe thermal and dynamic environments.
-Knowledge of materials and processes relevant to aerospace electronics.
-Experience with contemporary solid modeling tools such as Unigraphics NX.
-Knowledge of design techniques for high voltage systems
-Experience with FEM thermal and structural analysis tools such as ANSYS Workbench.
-Experience with Thermal Desktop and Icepak (nice to have)
-Knowledge of environmental test of aerospace electronics.

Education:
BS Degree preferably in Mechanical, Aeronautical or Electrical Engineering plus six years minimum of design/development engineering experience.

Masters Degree, preferably in Mechanical, Aeronautical or Electrical Engineering plus three years of design/development engineering experience.
 
Job Number: MB-5654
Job Location: East Aurora, NY
Rate: 53/hr
Per Diem: no
Duration: 12 months
Input Date: 11/05/2018
Last Updated: 11/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electronics Technician / Must have hand soldering experience. Cable harness fabrication and bench work experience preferred TX

Description:
163437 Electronics Technician
Location: Fort Worth, TX
Status: Open

Request: Light Industrial - Electronics Technician
Qty: 2
Desired Start Date: 10/29/2018
End Date: 2/28/2019

Job Description:
Consist of engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25lbs. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors. An AA in Electrical or Electronics Engineering is highly preferred. Extensive hand soldering experience mandatory.

Must have hand soldering experience. Cable harness fabrication and bench work experience preferred.

Region: Fort Worth, TX
Level: Level 2: 3+ YRS
Pay Rate: $16.00 - $31.00 Hourly
 
Job Number: JE-1219-1
Job Location: Fort Worth, TX
Rate: 31/hr max
Per Diem: no
Duration: 6 months
Input Date: 12/11/2018
Last Updated: 12/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Electronics Technician (2) - TX

Description:
Chipton-Ross is seeking an Electronics Technician located in Fort Worth, TX

RESPONSIBILITIES:
Consist of engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25lbs. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

REQUIRED EXPERIENCE:
Must have hand soldering experience. Cable harness fabrication and bench work experience preferred. Level 2: 3+ YRS

EDUCATION:
Accredited AA in Electrical or Electronics Engineering is highly preferred. Extensive hand soldering experience mandatory.

WORK HOURS:
Full-Time/First Shift

 
Job Number: 174660
Job Location: Fort Worth, TX
Rate: Up to $35.25 DOE
Duration: 4 MONTHS
Input Date: 11/08/2018
Last Updated: 12/13/2018
Firm Name: CHIPTON ROSS
Attention: Chris Conaway
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cconaway@chiptonross.com
Website: www.chiptonross.com

Electrophysics Engineer IV - Electromagnetic Compatibility - (OK)

Description:
Several openings in Oklahoma City, OK.

Active Secret Clearance, NOT required to start.

Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate complex systems and components into higher level systems and platforms. Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts critical tests of various kinds to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Generates major sections of proposals to support development of new business.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: ElectroPhysicsOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 10/16/2018
Last Updated: 12/07/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: vibhas.sadhu@acsicorp.com
Website: www.acsicorp.com

Electrophysics Engineer/Scientist

Description:
PDS Tech Inc. is seeking an Electrophysics Engineer/Scientist, at the Oklahoma City, OK.

Summary:
  • Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components.
  • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
  • Develops architectures to integrate systems and components into higher level systems and platforms.
  • Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements.
  • Defines and conducts tests to validate performance of designs to requirements.
  • Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements.
  • Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested.
  • Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status.
  • Writes appropriate sections of proposals to support development of new business.
  • Works under general direction.
     


 
Prerequisites:
  • Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard. Experience with Military Programs and/or Commercial Derivative aircraft is highly desired.

 
Job Number: 1810094694
Job Location: OK City, OK
Duration: 6 months
Input Date: 11/09/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Alex Ysassi
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qxvHQAQ&URLSource=cjhunter

Electrophysics Engineer/Scientist

Description:
PDS Tech Inc. is seeking an Electorphysics Engineer/Scientist, in Oklahoma City, OK.

Summary:
  • Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components.
  • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
  • Develops architectures to integrate complex systems and components into higher level systems and platforms.
  • Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements.
  • Defines and conducts critical tests of various kinds to validate performance of designs to requirements.
  • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
  • Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues.
  • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
  • Generates major sections of proposals to support development of new business.
  • Works under minimal direction.

Prerequisites:
  • Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
     

 
Job Number: 1810093660
Job Location: OK City, OK
Duration: 6 months
Input Date: 10/17/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Alex Ysassi
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f8BOAAY&URLSource=cjhunter

Electrophysics Engineer/Scientist 4 - Electromagnetic Compatibility

Description:
**Requires the ability to obtain Secret Clearance**

Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate complex systems and components into higher level systems and platforms. Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts critical tests of various kinds to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Generates major sections of proposals to support development of new business. Works under minimal direction.
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 373626
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 10/16/2018
Last Updated: 12/13/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrophysics Engineer/Scientist 5 - Electromagnetic Compatibility

Description:
**Requires the ability to obtain Secret Clearance**

Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate multiple systems into higher level systems and platforms. Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements. Develops new and improved modeling and simulation techniques. Leads development and execution of critical tests to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Creates new tools to improve management of projects. Leads development of major sections of large-scale proposals to support development of new business. Works under consultative direction.
Degree and typical experience in engineering classification: Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard. Experience with Military Programs and/or Commercial Derivative aircraft is highly desired.
 
Job Number: 373676
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 11/07/2018
Last Updated: 12/13/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrophysics Engineer/Scientist- Level 3

Description:
PDS Tech Inc. is seeking an Electrophysics Engineer/Scientist, at the Oklahoma City, OK.

Summary:
  • Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components.
  • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
  • Develops architectures to integrate systems and components into higher level systems and platforms.
  • Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements.
  • Defines and conducts tests to validate performance of designs to requirements.
  • Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements.
  • Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested.
  • Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status.
  • Writes appropriate sections of proposals to support development of new business.
  • Works under general direction.
     


 
Prerequisites:
  •  Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

 
Job Number: 1810094690
Job Location: OK City, OK
Duration: 6 months
Input Date: 11/07/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Sheila Hernandez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qxusQAA&URLSource=cjhunter

Electrophysics Engr/Scien 3 - (5) - OK - O/M

Description:
Chipton-Ross is seeking 5 Electrophysics Engineers/Scien 3 located in Oklahoma City, OK

RESPONSIBILITIES:
Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate systems and components into higher level systems and platforms. Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts tests to validate performance of designs to requirements. Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested. Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status. Writes appropriate sections of proposals to support development of new business. Works under general direction.

EDUCATION:
Accredited Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

WORK HOURS:
Full-Time/First Shift
8 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 174946
Job Location: OK City, OK
Rate: $DOE
Duration: 6 MONTHS
Input Date: 11/07/2018
Last Updated: 12/13/2018
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Electrophysics Engr/Scien 5 - OK - O/M

Description:
Chipton-Ross is seeking an Electrophysics Engineer/Scien 5 located in Oklahoma City, OK

RESPONSIBILITIES:
Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate multiple systems into higher level systems and platforms. Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements. Develops new and improved modeling and simulation techniques. Leads development and execution of critical tests to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Creates new tools to improve management of projects. Leads development of major sections of large-scale proposals to support development of new business. Works under consultative direction.

EDUCATION:
Accredited Degree and typical experience in engineering classification: Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard. Experience with Military Programs and/or Commercial Derivative aircraft is highly desired.

WORK HOURS:
Full-Time/First Shift
8 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 174947
Job Location: OK City, OK
Rate: $DOE
Duration: 6 MONTHS
Input Date: 11/07/2018
Last Updated: 12/13/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer III / CAD / Proficiency with RTCA/DO-178B development and verification / expert-level fluency in ANSI C and assembly / expertise with low-level software including device drivers, interrupt service routines CA

Description:
Engineer III

Work Site Address: Irvine, CA 92618
Job Number: 5962
Max Pay Rate: 60-65/hr max
12 months

2 openings

Roles and Responsibilities

Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.).

Qualifications and Education Requirements
· Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.
· Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience.
· Has thorough knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies.
· Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.
· Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.
· Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.
· Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.


Preferred Skills
Proficiency with RTCA/DO-178B development and verification; expert-level fluency in ANSI C and assembly, expertise with low-level software including device drivers, interrupt service routines, etc.
 
Job Number: JK-5962
Job Location: Irvine, CA
Rate: 60-65/hr max
Per Diem: no
Duration: 12 months
Input Date: 12/10/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Engineer Mechanical (Aircraft Fuel Systems Design Engineer) Clearance

Description:
PDS TECH INC. is seeking Engineer Mechanical (Aircraft Fuel Systems Design Engineer) located in Melbourne,FL.  Contact Elisa Petersen for details at 316-448-0890 or send resume to epetersen@pdstech.com


Summary:
The successful candidate will have a demonstrated ability to design and integrate aircraft fuel subsystems, as well as a demonstrated ability to prepare build-to packages utilizing 3D modeling software.
Active DoD Secret clearance required to start.
Last investigation must be within the last 6 years Offer is contingent upon ability to obtain access to Special Programs (SAP).

 


Qualifications
 
Basic Qualifications: 
Minimum of 14 years’ experience directly related to aircraft subsystem design and integration, as well as proven engineering team leadership abilities.  Demonstrate experience with 3D modeling software (NX or equivalent). Active DoD Secret Clearance.

 
Preferred Qualifications:
Bachelor of Science degree is Aerospace, Mechanical, Electrical Engineering or Bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university.  Experience with, NX and TeamCenter. Demonstrated ability to perform design utilizing tube routing functions within the NX software.
 
 
Job Number: 1810086188
Job Location: Saint Augustine, FL
Duration: 0 months
Input Date: 07/17/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mTBIAA2&URLSource=cjhunter

Engineer Mechanical (Composite Aircraft Design) 3- Secret

Description:
PDS Tech Inc. is seeking a Mechanical Engineer- Secret Clearance, in Melbourne FL.
Active DoD Secret Clearance is required to start. Secret Clearance must have been established or reviewed within the last 6 years. Offer is contingent upon the ability to obtain access to Special Programs (SAP).
Summary:
  • Candidate will be responsible for structural design of primary and secondary composite and metallic aircraft structural parts and assemblies for both new and existing aircraft. 
  • Candidate will work within an Integrated Product Team (IPT) environment, interfacing with IPT leadership, suppliers, customers, and other technical disciplines. 
  • Proficiency with the NX-TeamCenter tool suite and the ability to independently prepare and lead the preparation of product build packages is essential.  
  • Candidate may participate in on-site support at product manufacturing and integration sites. 

Please send your resume to Elisa Petersen at epetersen@pdstech.com or call 316-448-0890. 
Prerequisites:
  • 5+ years of experience in aircraft mechanical design (will consider years of experience/education in lieu of degree).
  • Experience designing composite aircraft primary structure.
  • Proficiency with NX solid modeling software.
  • Proficiency with TeamCenter PLM software.
  • The ability to obtain and maintain access to Special Programs.

 Preferred Qualifications:

  • Bachelor of Science degree in STEM.
  • Proficiency with FiberSim composite definition software.

 
Job Number: 1810089266
Job Location: Melbourne, FL
Duration: 12 months
Input Date: 08/23/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mgGsAAI&URLSource=cjhunter

Engineer Mechanical (Composite Aircraft Design) 4 - Secret

Description:
PDS Tech Inc. is seeking a Mechanical Engineer -4 Secret Clearance, in Melbourne, FL.
Active DoD Secret Clearance is required to start. Secret Clearance must have been established or reviewed within the last 6 years. Offer is contingent upon the ability to obtain access to Special Programs (SAP).
Summary:
  • Candidate will be responsible for structural design of primary and secondary composite and metallic aircraft structural parts and assemblies for both new and existing aircraft.
  • Candidate will work within an Integrated Product Team (IPT) environment, interfacing with IPT leadership, suppliers, customers, and other technical disciplines.
  • Proficiency with the NX-TeamCenter tool suite and the ability to independently prepare and lead the preparation of product build packages is essential.  
  • Candidate may participate in on-site support at product manufacturing and integration sites. 

Please send your resume to Elisa Petersen at epetersen@pdstech.com or call 316-448-0890
Basic Qualifications:
  • 9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD. (Will consider years of experience/education in lieu of degree).
  • Experience designing composite aircraft primary structure.
  • Proficiency with NX solid modeling software.
  • Proficiency with TeamCenter PLM software.

Preferred Qualifications:

  • Bachelor of Science degree in STEM.
  • Proficiency with FiberSim composite definition software.

 
Job Number: 1810089265
Job Location: Melbourne, FL
Duration: 12 months
Input Date: 08/23/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mgGnAAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Mechanical - 3 / Structural design experience using NX CA

Description:
Engineer Mechanical - 3 (Job Number: 18016421)

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Oct 29, 2018

Target End Date: Oct 25, 2019

Pay Rate: $46 to $48/hr

Work Schedule: 9/80

Duration of Assignment: Up to 1 year

Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy. Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines.


Basic Qualifications:

5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.


Preferred Qualifications:

Structural design experience using NX
 
Job Number: MB-1681
Job Location: El Segundo, CA
Rate: 48/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/30/2018
Last Updated: 12/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Engineer Structural - Secret

Description:
PDS Tech Inc. is seeking a Engineer Structural, in Melbourne, FL.

Summary:
  • Perform static, dynamic, and DaDT structural analyses of composite and metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program.
  • Ensure that designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives.
  • The analyst may also be expected to derive non-flight applied loads, create, extract and distribute internal loads, and perform weight and stiffness optimization.
  • Tools utilized may include FEMAP, NX, and other software applications.

Active DoD Secret Security Clearance is required to start.

Basic Qualifications:
  • 5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.

Preferred Qualifications:

  • Knowledge of FEMAP and NX CAE.
  • Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.
  • Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.

 
Job Number: 1810092309
Job Location: Melbourne, FL
Duration: 8 months
Input Date: 09/26/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f2wfAAA&URLSource=cjhunter

Engineer Structural - Secret

Description:
PDS Tech Inc. is seeking a Engineer Structural, in Melbourne, FL.

Summary:
  • Perform static, dynamic, and DaDT structural analyses of composite and metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program.
  • Ensure that designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives.
  • The analyst may also be expected to derive non-flight applied loads, create, extract and distribute internal loads, and perform weight and stiffness optimization.
  • Tools utilized may include FEMAP, NX, and other software applications.

Active DoD Secret Security Clearance is required to start.

Basic Qualifications:
  • 5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.


Preferred Qualifications:

  • Knowledge of FEMAP and NX CAE.
  • Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.
  • Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.

 
Job Number: 1810092306
Job Location: Melbourne, FL
Duration: 8 months
Input Date: 09/21/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f2wBAAQ&URLSource=cjhunter

Engineering Manager, Systems Software (749)

Description:
**Must be US Citizen to apply for Secret cleared positions**



CSS Staffing is seeking an Engineering Manager, Systems Software, who has proven experience with a strong systems software development and programmatic background who has experience in managing systems, and software development teams – from project estimation to planning, executing, testing, software release management and QA - for development programs and production support activities across a diverse product portfolio in a matrix organization to achieve operational results. This role includes active management of the systems, software engineering functional group as well as management of cross-functional engineering activities on assigned programs.



Required Skills

*BSEE or related degree in software engineering or computer science

*Proven experience leading engineering teams with five (5) years minimum experience as a supervisor/manger.

*Minimum of Five (5) years’ experience with IA technologies and of their interactions to ensure system performance, including:

Mechanical structures, stiffness, inertia, weight trade-offs

System, motion and dynamics, expected pointing accuracy

Electric motors, performance, torque, construction

Position measurement with resolvers, Inductosyn, measuring tools

System performance calculation, simulation –consumption, vibration, temperature…-

Electronics hardware, noise, emissions

Control loops, reaction speed, performance assessment

Software for control, diagnostic, graphical user interface (Linux/RTOS/Python)

Positioner testing, tuning, qualification, field installation

EMI design, test, remediation

MIL/Rugged environment design, qualification test

*Experience with engineering and quality requirements for defense applications

*Ability to obtain and maintain a secret security clearance



Desired Skills

*Masters’ Degree in Engineering or Management

*Twelve (12) years minimum experience in new product development and engineering-to-production transitions

*8 years’ experience developing hardware requirements to meet higher-level system goals

*8 years’ experience with simulation software such as ModelSIM

*8 years’ experience with Altium Designer for schematic entry

*8 years’ experience with Altera’s Quartus Prime IDE

*8 years’ experience generating product cost estimates and writing proposals

*8 years’ experience with code development processes or of LCM and/or Stage-Gate methodology

*Active secret security clearance highly desired
 
Job Number: 749
Job Location: Exeter, NH
Input Date: 12/03/2018
Last Updated: 12/12/2018
Firm Name: CSS STAFFING
Attention: Shay Rosen
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Email: shay@cssstaffing.com
Website: www.cssstaffing.com

Engineering Mechanical Design 3 / Catia V5 CA

Description:
163185
Engineering Mechanical Design 3 (Job Number: 18017716)

Number of Openings: 1

Location(s): United States-California-San Diego


Shift: 1st Shift

Target Start Date: Aug 30, 2018

Target End Date: Jan 25, 2019

Pay Rate: $53/hr

Work Schedule: 9/80



We are looking for a Mechanical Design Engineer for the Global Hawk program for the Equipment Installations Design Team.

This design engineering position will be responsible for the development, drafting, release and support to installation of detail aircraft components, support assemblies and equipment installation package BTPs/Drawings.

This will include both traditional 2D drawings using CATIA V5 drafting in accordance with NGC Design standard practices, fit/tolerance analysis/evaluation, design for manufacturability and coordination with other engineering disciplines of fully compliant hardware.


This designer will also develop and produce equipment installation requirement packages using 3D Model Based Definition and Functional tolerance Analysis in accordance with design standards for both secondary structure and electronic and payload equipment into the USAF Global Hawk UAS.

Basic Qualifications:
•B.S. Degree in Mechanical Engineering, Aerospace Engineering plus 5 years of experience.
•1 years experience with CATIA V5 for mechanical design
•5 years of aircraft mechanical design experience



Preferred Qualifications:
•2 years experience with aircraft equipment installations, secondary structure design and equipment packaging design
•Experience with ANSI Y14.5 GD&T for producible design.
•Experience with designing aircraft components for retrofit modification.
•Experience with military aircraft safe wire installations in accordance with SAE AS 50881
•Experience with design for human factors in accordance with MIL-STD-1472 or similar
•Experience with TeamCenter 2007, TeamCenter Unified/ CPLM
 
Job Number: MB-1684ATO
Job Location: San Diego, CA
Rate: 53/hr
Per Diem: no
Duration: 5 months
Input Date: 12/04/2018
Last Updated: 12/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Engineers -- Midwest & Southeast Locations

Description:
PDS is looking for Many Engineers:

Looking for those with an Active Secret clearance or the ability to obtain clearance

Mid-Level & Sr Software Engineers
-Oklahoma City, OK and St Louis, MO

Mid-Level & Sr Stress Engineers
-Oklahoma City, OK; St Louis, MO; and Charleston, SC

Systems Engineers - Avionics or Mechanical exp
-Oklahoma City, OK

Structures Engineers (Degreed)
Structures Designers (non-degreed)
-Oklahoma City, OK and Charleston, SC

Paperless Hiring, Paperless Weekly Pay, Direct Deposit, Holiday & Longevity Pay, Customizable Benefits, Identity Theft Protection, 401(k) Immediate Enrollment
 
Job Location: Midwest & Southeast
Input Date: 07/17/2018
Firm Name: PDS TECHNICAL SERVICES
800 Phone: 855/205-5824
Email: aircraftengineerjobs@pdstech.com
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Mechanical Design Engineer Creo (202)

Description:
This is a full time, 1 year contract located in York, PA*



We are recruiting for an entry level contract Mechanical Design Engineer who has fundamental knowledge of aerospace/DoD mechanical designing using Pro/E Creo.



Much of the work may be in mechanical and parts design, preparing items for machining and fabrication, welding, and assembly. A good knowledge of manufacturing processes will be used daily on manufacturing site.



Required:

*1-2 years’ experience in military/aerospace mechanical design using Pro/E Creo.
*Familiar with GD&T (ASME 14.5-2009)

*Able to work with some electrical as well as mechanical parts

*Able to work with Excel and creating large spreadsheets.

*Experience creating and reading engineering drawings, schematics.
*4 year engineering degree, or 4-5 years designing experience in lieu of degree



Pluses:

*Vehicle designing experience a plus
 
Job Number: 202
Job Location: York, PA
Input Date: 11/01/2018
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 2

Description:
Equipment & Tool Designer 2

Location: Tukwila, WA
Duration: 6 Months

Job Description:
The Client Additive Manufacturing and Prototyping Lab is looking for early career individuals interested in working in fast paced environment. Work is emergent, high variety, and high impact. Individuals will be expected to work independently and as part of team to accomplish tasks and must have a get it done/figure it out attitude. The goal of this position is to identify and test fit candidates with the hope of finding individuals who will make a good permanent addition to the team at the end of the contract.

Job requirements:
-Part cleaning
-Build set-up and take down
-Part finishing
-Customer interface
-Use of hand and power tools
-Use of computers

Education / Experience:
AA degree in related discipline and typically 1 or more years of related experience or an equivalent combination of education and experience.

Skills:
Category Name Required Level
Areas of Expertise Mechanical No
Soft Skills Ability to Follow-up Yes Advanced
Soft Skills Ability to meet deadlines Yes Advanced
Soft Skills Ability to Work Independently Yes Advanced
Soft Skills Ability to Work with Others Yes Advanced
Technical Skills Mechanical Aptitude Yes Intermediate
Technical Skills Machining No
Technical Skills Mechanic/Technician Exp. No
Technical Skills Tool & Die Maker No
Technical Skills Wood finishing No
Technical Skills Woodworking techniques and properties No
Technical Skills Woodworking tools No

Skill Code:
66W-Tech Designer

Please share updated resume at ravi@iconma.com
 
Job Number: 18-16540
Job Location: Tukwila, WA
Per Diem: Available
Input Date: 10/22/2018
Last Updated: 11/01/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 3

Description:
Equipment & Tool Engineer 3

Location: Renton, WA
Duration: 6 months

Description:
Required qualifications:
- Electrical Engineering experience with an emphasis in software development
- Experience working with two or more of the following: web application development, mobile application development, object-oriented design and analysis, networking, unit testing, systems administration, and/or developing large software systems
- Experience with hardware and software configuration management
- Familiarity with and the ability to program with Visual Basic and C#

Typical Education & Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Preferred qualifications:
- Critical technical skills include proficiency in airplane digital signals and low voltage data acquisition
- Ability to create and update drawings with Auto Cad and/or Autodesk inventor
- Experience with digital data busses such as ARINC 429/717.
- Experience with aviation connector interfaces and packing such as ARINC 600.
- Knowledge of web design and maintenance
- Experience programming PLCs and HMIs
- Experience with National instruments Lab Windows CVI.
- Experience with equipment configuration control through Version Description Documents and/or Equipment Documents
- Experience using aviation interfaces such as synchros, resolvers, Linear Variable Displacement Transducers (LVDTs) and variable reluctance proximity sensors

Bachelor of Science degree in one of the following areas is highly preferred
Aeronautical Engineering
Aeronautics & Astronautics Engineering
Aeronautical Engineering Technology
Chemical Engineering
Civil Engineering
Aerospace Engineering
Electrical Engineering Technology
Manufacturing Engineering
Manufacturing Engineering Technology
Mechanical Engineering
Manufacturing Systems Engineering
Material Sciences and Engineering
Industrial & Systems Engineering
Mechanical Engineering Technology
Electrical Engineering
Metallurgical and Materials Engineering
Plastics Engineering
Plastics Engineering Technology
Structural Engineering

Skill Code:
66U-Designer Engineer.

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 18-17824
Job Location: Renton,, WA
Per Diem: Available
Input Date: 10/23/2018
Last Updated: 11/01/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer II - (Sylmar, CA)

Description:
- Design solar panels, solar panel components, and associated support tooling in AutoCAD / Inventor Pro Suite. Also
design and update searchlight and high intensity illumination products for solar cell and solar panel test in AutoCAD /
Inventor Pro Suite.
- Work closely with Panel Product Engineers to translate customer schematics and specifications into manufacturing
efficient panel layouts and detailed manufacturing drawings, inclusive of Bill of Materials (BOMs), detail views, wiring
lists, schematics, and notes. Participate in round-table drawing reviews and CAD-check of drawings generated by others.
Generate soft tooling files from AutoCAD model. Learn to generate and check photomask drawings.
- Work with Illuminations Systems Product Engineers to generate and update part and assembly documentation needed
for procurement, manufacturing and assembly, including generation of 3D models, verification of model tolerances, and
model management in VAULT.
Work with Product and Process Engineers to identify and define the manufacturing support tooling necessary to safely
build and test the hardware in conformance with customer requirements. Generate tooling procurement and assembly
drawings and models using AutoCAD/Inventor Pro Suite.
- Support proposal and design trade efforts by providing rapid assessment of potential layout options. Assess
customer ICDs for manufacturability and provide feedback/improvement suggestions to enhance compliance and/or
manufacturability. Participate in LEAN improvement initiatives from both manufacturing and engineering perspective.
Continually advance ideas for streamlining both design/documentation and manufacturing processes by applying DFMAT
principles to all generated and reviewed deliverable hardware and manufacturing/support tool designs.
- Apply GD&T principles to assure manufacturability for internally built assemblies and to help resolve procurement
issues.
- Use Finite Element Analysis to support new design development and Root Cause investigations. Use Inventor CFD tool
to assess thermal and mechanical stress on deliverable hardware and to assess factors of safety for assembly/ground
support tooling.
- Assist Product Engineering in preparation of program SDRL documentation, including parts and material lists, mass
analysis, magnetic moment analysis, and detailed design descriptions for internal and customer review packages. Learn
to perform radiation and power analysis and to generate handling procedures and hardware test reports to backfill as
needed during periods of high volume activity.
Qualifications - Internal
Basic Qualifications
- Proficiency in 2D and 3D CAD modeling using AutoCAD/Inventor Pro Suite 11 (or higher), including:
- Use of block part libraries
- Generation of multilayer drawing packages, detailed assembly views, and schematics
- Familiarity with AutoDesk Vault
- Demonstrated working knowledge of basic GD&T principles
- Working knowledge of Finite Element Analysis techniques, preferably using Inventor Pro Suite Analysis package
(including definition of model, mesh, and boundary conditions and interpretation/presentation of the results)
- Ability to read/generate electrical schematics
- Experience with PCBs or other electronics packaging and wiring design
- Ability to communicate effectively with a diverse group of both internal and external customers and colleague
Preferred Knowledge / Skills
- Familiarity with VBA, SQL, or Labview
- Familiarity with basic physics of solar cells, photolithographic processes, Aerospace materials and assembly techniques,
PCBs and electronics, FEA and FMECA analysis techniques
- Ability to compile and present data using Excel and PowerPoint, and to generate/update procedural documentation using
MS Word
Typical Education / Experience
Degree and typical experience in engineering classification: Bachelor's and 2 or more years' experience or a Master's
degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in
engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required,
accreditation standard.
 
Job Number: EquipToolECA
Job Location: Sylmar, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 11/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
External Loads Engineer

Description:
Responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.

Duties and Responsibilities:
Applicant must be able to define and validate aircraft flight and ground loads through simulation/calculation using established theory and methods.

Education, Work Experience, Certification and/or Licensure:
1. BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
2. Applicant shall possess a minimum of 6 years’ experience in aircraft external Loads analysis with preferably 10 years’ experience
3. Excellent communication skills both written and verbal
4. Experience and demonstrated proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required. Python experience and/or proficiency is desirable.

Knowledge, Skills and Abilities:
1. Knowledge of static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements. Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable.
2. Knowledge of, and experience with, FAA FAR 23 and EASA CS 23 Loads regulatory requirements and means of compliance is required, and experience with FAA FAR 25 and EASA CS 25 Loads regulatory requirements and means of compliance is desirable.
3. Must be proficient in generating documentation to support certification efforts related to external loads.
4. Knowledge of, and experience with, dynamic aeroelastic analysis is desirable. Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable.
5. Strong knowledge of CFD principles and CFD-based modeling, along with wind tunnel test data usage for Loads analysis, is required. Applicant must be able to communicate aerodynamic, structures and systems discipline input needs to ensure accurate load set development and conveyance.
 
Job Number: 28-031
Job Location: Greensboro, NC
Rate: $70-$75/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 09/19/2018
Last Updated: 11/14/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

FAA Technician - Electronic - Level 3

Description:
PDS Tech, Inc. is hiring FAA Electronics Technician - Level 3 in Olathe, KS.
For this role is looking for a candidate that can identify the schematic symbols for basic electronic components and have some basic knowledge of electronic theory.  Examples of components the right candidate will be able to identify are resistors, capacitors, transistors, diodes, inductors, and logic gates. Would also like for there to be an understanding of how those components work and how they interact with AC and DC voltage.  Candidate MUST have the ability to read schematics at a high level to help troubleshoot electrical circuits.
In your role you will:
  • Construct, maintain, and test electrical systems and components.
  • MUST be able to test & troubleshoot down to the component level.
  • MUST BE ABLE TO READ SCHEMATICS - To diagnose and repair circuitry.
  • Use measuring and diagnostic tools to test and modify electronic parts.
  • Ensure systems and components meet established specifications.
  • Familiar with a variety of the field's concepts, practices, and procedures.
  • Relies on experience and judgment to plan and accomplish goals.
  • Performs a variety of complicated tasks.
  • A wide degree of creativity and latitude is expected.
  • Typically reports to a supervisor or manager.

As our ideal candidate, you will meet the following requirements:
  • Requires a high school diploma or its equivalent.
  • May be required to complete an apprenticeship and/or formal training in area of specialty.
  • May require 4-6 years of experience in the field or in a related area.
  • Soldering background/experience is a PLUS
  • Troubleshooting Electronics to component level PREFERRED experience.
  • MUST HAVE ELECTRONICS BACKGROUND
  • Background in avionics electronics and mechanical background is very beneficial.
  • Must be a U.S. citizen.
  • Currently hiring for both 1st and 2nd shift

Please send your resume to mmarquez@pdstech.com today!!
 
Job Number: 1810091083
Job Location: Olathe, KS
Duration: 6 months
Input Date: 11/05/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002eyvfAAA&URLSource=cjhunter

Final Line Mechanic II

Description:
PDS Tech is seeking a Final Line Mechanic II for an open position in Savannah, GA.
In your role, you will:

  • Assemble, install, and adjust aircraft structure parts and system components. Rig control cables, sectors, linkages, control surfaces, landing gear and doors, engines, cowls, aircraft entry doors and associated parts and hardware.
  • Remove and replace system components, cut and fit system lines and associated hardware necessary to facilitate and perform repairs.
  • Responsible for quality and efficiency of all installations; ensure all parts/assembly meet requirements. Perform necessary rework to ensure installations meet conformity.
  • Install systems lines, valves, ducts and associated parts and hardware. Work to ensure a leak free system.
  • Use a variety of tools and equipment, including permaswage pumps, dies, line cutting tools, wrenches, checking tools, witness guages, etc. and tools to successfully complete component and perform minor structure installation.
  • Assist in troubleshooting mechanical and structural problems to facilitate and perform basic repairs.
  • Update and sign required logs and records as required.
  • Check own work and may be required to check work of junior mechanics to ensure a defect free installation prior to final inspection.
  • Maintain a neat and orderly work area, support the company FOD and 5S programs and comply with all safety regulations.  
  • Maintain and use all logs and records such as MIR sheets, DMTs, Crabs, PCOs, etc.
  • Support continuous improvement processes as assigned.


Additional Functions:



  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
  • Perform other duties as assigned.

Education and Experience Requirements:
High School graduate/GED. Airframe and Power Plant License preferred. Three (3) years aerospace/aviation experience or equivalent mechanical experience such as auto mechanics, heavy equipment, etc.

Other Requirements:
1. Must be able to climb ladders and stairs, work in small-space restricted areas and lift up to 50 lbs. 2. Solumina and Smarteam experience preferred. 3. Requires ability to read and interpret basic blueprints and schematic diagrams and use all tools required to do the job. 4. Must be skilled in close tolerance work and have knowledge of use of special tools and ability to perform close tolerance work such as drilling, reaming, ship fitting parts, etc. 5. Ability to operate hydraulic mule pumps, fixtures, and jigs.





Unique Skills:



Demonstrated experience with aircraft power plants / nacelles is preferred.


 
Job Number: 1810094165
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 10/16/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qw4QQAQ&URLSource=cjhunter

Flammability Engineer

Description:

PDS Tech is seeking a Flammability Engineer for an open position in Mobile, AL

Position Summary: 



The Flammability Engineer will support Company cabin and cargo engineering team in the review and approval of interior engineering flammability data in support of major and minor changes to aircraft type design



Primary Responsibilities: 



  • Ensure aircraft type design complies with type certification requirements for cabin and cargo material flammability requirements.
  • Generate certification plans and support the creation of compliance statements in support of major projects.
  • Provide solutions to issues arising during certification projects and provide status to Management on these key issues.
  • Coordinate with suppliers during development phase of the equipment to ensure that compliance to Company requirements are satisfied. 
  • Define the certification requirements to support aircraft modification in accordance with customer's request.
  • Review and approve Airbus internal and vendor test plans and reports, including witnessing testing as required.
  • Ensure that the design can be certified and all the necessary data for test and certification is produced.
  • Provide input and feedback on matters pertaining to certification between equipment suppliers, customers and Airbus engineering organizations.
  • Generate reports as required. Reviews and approves suppliers compliance reports.
  • Create and ensure that the engineering is robust and meets integrated project requirements. 
  • Perform other tasks as assigned


Experience / Skills / Training: 



  • Clear and in-depth knowledge of FAA, European and other Foreign National Authority aircraft certification regulations pertaining to Part 23 and 25 cabin interior and flammability requirements.
  • A good understanding of the Part 23 or 25 certification process (TC & STC), regulations, orders, notices and policies.
  • Minimum of 10 years in aviation or 5 years in aircraft compliance experience, specifically cabin and/or passenger to freighter.
  • Ability to write reports and technical memorandums.
  • Strong liaison with other departments both internally and internationally.


Education / Special Qualifications: 



  • Bachelor's Degree (B.S) in Mechanical, Aerospace, or Civil Engineering preferred.

  • Position requires in-depth knowledge of Engineering Mechanics and Strength of Materials.
  • Good leadership and communication skills.
  • Minimum of 5 years in cabin or cargo compartment stress analysis.
  • Experience in static (FE and free-body), fatigue and transient analysis, Nastran, Patran, MathCad.
  • Familiar with FAA/EASA Aircraft regulatory requirements.
  • Able to utilize Microsoft Excel, Word, PowerPoint and Project PC tools


Education / Special Qualifications:
5 years of aircraft certification experience and 3 years flammability certification experience. 
Bachelor’s in Engineering and Part 23 or 25 certification process understanding.

 

 


Travel:



Up to 10% business travel.

 



Essential Functions:   



  • Vision: able to see and utilize computer screens; able to move through office and from point to point to find specific co-workers and in-house experts.
  • Hearing: able to hear in normal conversations and respond to warnings and signals.
  • Speaking:  able to participate in normal business conversations.
  • Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): able to operate standard office equipment and utilize electronic id to enter building
  • Carrying: able to carry up to 20 lbs./9kg. when transporting documents, printer paper and similar items.
  • Lifting:  able to lift up to 20lbs/9kg. on occasion.
  • Pushing / Pulling: able to push/pull office chairs and pieces of equipment
  • Sitting:  able to sit for extended periods of time in front of a computer terminal while writing bulletins or participating in meetings
  • Squatting / Kneeling:  able to occasionally able to squat/kneel to access items stored on low shelving
  • Standing: able to stand for long periods of time in meetings and discussions
  • Travel:  able to travel through office/work complex and occasionally within US for business meetings.
  • Walking (include routine walking such as to a shared printer to retrieve documents):  able to walk through office and production areas sometimes on uneven surfaces to reach meetings, visitors and direct others to meetings.

 
Job Number: 1810087122
Job Location: Mobile, AL
Duration: 6 months
Input Date: 07/19/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mWhoAAE&URLSource=cjhunter

Flight Controls Engineer

Description:
PDS Tech is seeking a Flight Controls Systems Engineer for an open position in Wichita, KS.
In your role, you will:
  • Responsible for design, development, and certification in the area of systems for new and existing 14 CFR Part 23/25
  • . Responsible for development and documentation of system architecture, system requirements, system schematics and computer simulations, coordination of system test article fabrication and/or validation of initial design through physical test, and certification documentation of aircraft hydraulic systems.
  • Prepare certification plans, conformity requests, equipment qualification test plans/results, system safety documents, ground and flight test plans/results and certification reports. Reviews engineering drawings for systems prepared using computer based drafting tools (CATIA/CCD and/or CATIA V5).Supplier coordination and review of supplier engineering documents.
  • Troubleshooting activities in both production and field environments. Support investigation, root cause analysis, corrective action, and ODA/FAA coordination of aircraft field issues and component failures when warranted for certification concerns.
  •  

• Required: 

o CATIA fluent for preparation of layouts, trade studies, kinematic models, and engineering drawings 

o 14 CFR Part 23/25 aircraft flight Controls design experience, 5 years minimum 

o Aircraft aluminum structure design; fluent with typical fabrication and assembly processes (forming, machining, fastening, etc.) 

o Aircraft mechanical system design 

o Preferred: ASME Y14.5 Geometric Dimensioning and Tolerancing 

o Preferred: CATIA V6 and Enovia experience
 
Job Number: 1810090589
Job Location: Wichita, KS
Duration: 12 months
Input Date: 10/26/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mkbwAAA&URLSource=cjhunter

Flight Controls Engineer

Description:
PDS Tech is seeking a Flight Controls Engineer for an open position in Nagoya, Japan.

 
  •  
  • B.S. degree in Aerospace Engineering, Mechanical Engineering or related technical degree.
  • Applicable coursework or coop/intern experience to this position desired.
  • Working knowledge of generic CAD design tool processes is desired.
  • Experience with CATIA V6/Enovia – or ability to learn it quickly from V5
  • Experience with Kinematics in CATIA
  • Flight Controls Systems design experience a plus
  • Must have excellent verbal communication and presentation skills.
  • Proficient with Microsoft Office applications including Word and Excel.
  • Professional demeanor, troubleshooting and organizational skills are necessary.
  • International experience desirable. 
  • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

 
Job Number: 1610045561
Job Location: Nagoya,
Duration: 36 months
Input Date: 08/09/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000003BKTAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls and Simulation Engineer

Description:
Flight Controls and Simulation Engineer

As a Flight Controls and Simulation Engineer, your role will be to design and implement flight control, estimation, and simulation software for an unconventional autonomous vehicle. You will be involved in all stages of development — from dynamic modeling and sub-scale testing, to designing complex control systems, analyzing their robustness and performance, and validating them in simulation and on full-scale aircraft.
You have a passion for self-piloted aircraft. You have an in-depth understanding of fixed-wing and rotorcraft flight dynamics, and of classical and modern flight control techniques. You have designed, analyzed, implemented, and tested complex — yet elegant — multi-level controller architectures, and successfully deployed them in the real world. You have built high-fidelity 6DOF simulations for software-in-the-loop and hardware-in-the-loop testing.
You have a strong mathematical background, with an emphasis on linear algebra, estimation, and optimization. You have used your talents in applied control theory to contribute meaningfully to the design, analysis, and flight testing of one or more operational aircraft. You are familiar with model-based design techniques, and how they are deployed within the constraints of safety-critical embedded systems. You have working familiarity with the principles of software engineering, and have some experience with application level software deployment, testing, and debugging.
As our projects are “out-of-the-box” by design, you will be expected to seek, investigate, and implement creative solutions to challenges and impediments, and skillfully pivot when needed, with minimum loss of momentum. We expect you to do this with equal parts technical intuition and rigorous by-the-book protocol.
To get specific, your responsibilities will be to:
Design and implement flight control, navigation, guidance, estimation, and simulation software for unconventional aircraft
Effectively communicate your designs, analysis, and engineering intent with the rest of the engineering team and partners
Assist the engineering and flight testing team as required

Qualifications:
A Master’s or Doctorate degree in Aeronautical, Mechanical, Electrical, or Software Engineering
At least five years of progressively ambitious experience in the area of vehicle dynamics, controls, and simulation
Expert level knowledge of MATLAB, Simulink, and associated workflows
Experience with C, C++, or another compiled/systems language and Python or another interpreted language
Experience with typical airborne sensors: IMUs, GPS, Air Data, Lidar, etc
A strong mathematical background
Excellent communication skills
An aptitude for working in small teams, with the ability to take a leading role in your area(s) of specialty and readiness to work across disciplines where appropriate


The Structures Company is an AA/EOE.
 
Job Number: 236
Job Location: ORE
Rate: DOE
Per Diem: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 09/06/2018
Last Updated: 12/01/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrument Engineer

Description:
Flight Test Instrument Engineer

Location: Windsor Locks, CT
Pay Rate: $42/hr
Duration: 12 Month W2 Contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met. Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns.

Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex mechanical systems, testing of electrical systems and components such as motor controllers, actuator controls, & system controllers. Capability of working independently and is self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

US Person is required

This position may include off-shift work hours and weekends as required.

Education:
-Bachelors or higher required
-6+ years of directly related experience
 
Job Number: 9856
Job Location: Windsor Locks, CT
Rate: 42
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/31/2018
Last Updated: 10/31/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Flight Test Instrumentation Technician

Description:
Role Description
 
Summary
As part of a multicultural team, you will be responsible for manufacturing, assembling, and supporting testing of hardware for flight testing of aircraft. Working from engineering instructions, procedures and drawings with limited guidance, fabricate, install, check-out, calibrate, diagnose, and troubleshoot instrumentation data acquisition systems and sensors. This position will require planning, building and terminating various cable harnesses required in the instrumentation system and significant attention to detail to support safe testing.
 
 
Responsibilities
  • Assembly of components to aerospace standards working from blueprints, engineering orders, schematics, repair manuals and other technical documents
  • Termination and installation of wire harnesses and tubing
  • Work with engineers to review design concepts and provide feedback for ease of assembly
  • Review, edit and follow work instructions for installation tasks
  • Plan, communicate and execute installation steps for complex mechanical installations
  • Work safely in aircraft environment


Qualifications
  • Associates or 2 year technical degree along with a minimum of 1 year of flight test operations experience
  •  
  • A minimum of 5 years’ experience in flight test operations in lieu of the degree
  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to use standard mechanical tools and fabrication shop equipment
  • Must be capable and comfortable working within a diverse team environment

 
Desired

  • A&P license or equivalent experience
  • Experience operating heavy lifting equipment such as cranes and forklifts
  • Experience with measurement tools
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Knowledge in the use of 3D CAD tools, and the ability to read mechanical drawings and electrical diagrams.

 
Job Number: 1810094286
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 10/16/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qwKqQAI&URLSource=cjhunter

Fluid System Responsible Engineer 4- Secret Clearance

Description:
PDS Tech, Inc is seeking a candidate for the Flight System Responsible Engineer 4 Secret Clearance position located in Melbourne, FL.  
  • Description
    Immediate opening for an experienced engineer specializing in aircraft Subsystems such as Environmental Control Systems, Fuel Systems, Hydraulics Systems, and etc. 
  • The successful candidate will have a demonstrated ability to architect, develop, modify, test and trouble-shoot aircraft fluid subsystems.
  • In addition, the successful candidate will have demonstrated ability to manage suppliers engaged in development of fluid subsystems, and demonstrated team leadership abilities. 
  •  Demonstrated ability to perform subsystem analysis and prepare build-to packages utilizing 3D modeling software is a plus.
  • This position will be permanently located in Melbourne, FL. Some travel is required.
  •  Active DoD Secret Clearance. /SAP

Basic Qualifications:
  • 9 Years with Bachelors in Science;
  • 7 Years with Masters; 4 Years with PhD.
    Bachelor of Science degree is Aerospace, Mechanical, Electrical Engineering or Bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university with a minimum of 6 years’ experience directly related to aircraft subsystem development and analysis, as well as proven engineering team leadership and supplier management skills or Master’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 7 years of experience directly related to aircraft subsystem development and analysis, as well as proven engineering team leadership and supplier management skills. 
  • Active DoD Secret Clearance.

 
Preferred Qualifications:

  • Bachelor of Science in Mechanical or Aerospace engineering plus a Master of Science in Mechanical or Aerospace engineering or Technical Management, or an MBA. 
  • Experience with AMESim fluid system modeling tool, NX and TeamCenter. 
  • Active DoD Secret Clearance.

 
Job Number: 1710073608
Job Location: Melbourne, FL
Duration: 12 months
Input Date: 10/03/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023Gq7AAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Systems Engineer

Description:
• Fuel Systems Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Fuel Systems Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Fuel Systems design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-008
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 10/31/2018
Last Updated: 11/14/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Full Time Mid-Level Design Engineer - Composites

Description:
Design Engineer Composites
Location: West Lafayette, IN
Direct, full time position


Job Description:

Seeking Design Engineers to perform mechanical design and drafting tasks including composite part design. Qualifications include:
•Experience with surfacing, solid modeling, and drafting
•CAD Software: CATIA V5
•Primary / Secondary Structural Design experience including sheet metal, machined and composite parts
•Experience using Composites workbench (CPD) for CATIA V5
•Composite Tooling (molds, trim tools) design preferred
•Experience with GD&T preferred
•Aerospace experience preferred




Min years of experience: preferred 3 yrs minimum including experience with composites design

Degree Requirements: BS in Engineering or Engineering Technology




____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55310
Job Location: IN, AL, CT
Rate: Negotiable
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/05/2018
Last Updated: 12/13/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Email: lleszek@butler.com
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
GROUND TEST AND AIRCRAFT INSTRUMENTATION TECHNICIAN

Description:
Ground Test and Aircraft Instrumentation Technician

15+ Months Contract Opportunity

Stratford, CT

Work from Engineering Requests, Procedures and Drawings with limited guidance; to Fabricate, Install, Check-out, Diagnose, and Trouble-Shoot Instrumentation Data Acquisition Systems/Sensors in support of Ground and Flight Test Programs.

Requires planning, building and terminating the various cable harnesses required in the Instrumentation System.
Assist in performing System and sensor calibrations.
Working environment consist of the Structural Test Lab, Remote Test Stands ( Engineering & Quality Assurance ) as well as Offsite support to include Aircraft Instrumentation .
Requires a good working knowledge of Instrumentation Sensors, slip rings, and data acquisition systems.
Must possess a strong Mechanical and Electrical background and familiarity with Strain Gages and their circuitry, linear displacement and vibration transducers, measurement systems, instrumentation wiring and documentation.
Ability to perform strain gage installations preferred.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
 
Job Number: 367113
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 08/31/2018
Last Updated: 11/13/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

Ground Test Engineer

Description:
PDS Tech, Inc. is seeking a Ground Test Engineer in Stratford, CT.
The ideal candidate will support, perform, and manage a specific function within a larger mechanical system, often including hardware and mechanical parts. 
Responsible for projects with significant scope and complexity covering all aspects of Ground Testing helicopter components and systems. 
Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.
Typical tasks include:
  • detailed test planning,
  • coordination with internal and external customers,
  • test conduct,
  • use of computer data analysis tools, and
  • generation of test plans and reports.

Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems. This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.
Test programs typically involve full scale fatigue and static evaluations of dynamic components, main and tail rotor whirl tests, airframe static tests, airframe shake tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight. Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft, and oversight of supplier performed component qualification efforts.
 

 
Job Number: 1810090990
Job Location: Stratford, CT
Duration: 18 months
Input Date: 09/03/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002ey6TAAQ&URLSource=cjhunter

Ground Test Engineer

Description:
 PDS Tech, Inc. is seeking a Ground Test Engineer for an open position in Stratford, CT.
 
The Ground Test Engineer will support, perform, and manage a specific function within a larger mechanical system, often including hardware and mechanical parts.
 
The ideal candidate will be responsible for projects with significant scope and complexity covering all aspects of Ground Testing helicopter components and systems.
 
Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.
 
Typical tasks include:
  • detailed test planning,
  • coordination with internal and external customers,
  • test conduct,
  • use of computer data analysis tools, and
  • generation of test plans and reports.

 
Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems. This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.
 
Test programs typically involve full scale fatigue and static evaluations of dynamic components, main and tail rotor whirl tests, airframe static tests, airframe shake tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight.
 
Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft, and oversight of supplier performed component qualification efforts.
 

 
Job Number: 1810088944
Job Location: Stratford, CT
Duration: 18 months
Input Date: 08/17/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002me69AAA&URLSource=cjhunter

Hydraulic Systems Specialist

Description:
PDS Tech is seeking a Hydraulic Systems Specialist for the Flight Control System Design Group, Regional Jet Development Project.

This position is located in Nagoya, Japan.  You may be requested to relocate to Seattle or Moses Lake (Washington State, USA) where aircraft flight testing is performed. It may also be requested to travel to systems supplier sites to manage the Hydraulics Gear technical contract.

SUMMARY of Responsibility
* Leading the development and finalization of the airplane’s design, being compliant to all applicable requirements,
* Responsible for leading activities of the Hydraulics System. This will include interfacing with all other aircraft functions and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft Landing Gear System,
* Work as a team member in a multi-cultural and international working environment in Japan Headquarters. Japanese Language skill is not required.
 
Responsibilities include but are not limited to:
(1) Develop and finalize the company’s airplane’s design, compliant to all applicable Landing Gear Structural and Mechanical System Requirements,
This activity includes;
(a) Evaluate the current aircraft design, with respect to compliance to the Landing Gear related airworthiness regulations of JCAB, FAA and EASA,
(b) Coordinate integration of design change activities originated from Landing Gear requirements when required,
(c) Present and Discuss the Hydraulic System compliance with the Transport Authorities,
(d) Lead verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.,
(2) Initiate/review related documents, technical calculation, interface discussion with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
(3) Manage the technical contract requirements with applicable Hydraulic System suppliers and other interfacing suppliers as appropriate,
(4) Provide expertize to assist in resolving the Hydraulic System performance during any rig testing or Flight testing,
 (5) Performs other duties as may be assigned.
 


Educational Requirements:
* BS Degree in Engineering; Mechanical or Aer