Job Search Results

635 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/12/14 Friday 02:51AM Pacific Time by ContractJobHunter. )

Listings 1 - 635

Go To My Job Tracker

Expand all descriptions

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 12/19/2016
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2377 - MECHANICAL DESIGNER - CABINETS - cv, word doc only

Description:
Act as a specialist in aircraft interior cabinets.

Search for information related to project assignment to the interior and exterior of the aircraft.

Manage customer requests related to customizations of interior options.

Establish technical requirements, mechanical and electrical interfaces and design, integrate, certify, test and troubleshoot the systems described above.

Assume responsibility for Definition engineering deliverables and milestones that the department must meet.

Act as the technical focal point for the engineering external suppliers.

Manage and conduct quality, productivity and cost governance with the engineering external suppliers.

You must be challenge-driven, results-oriented and problem-solving oriented.

Excellent knowledge in design and development of concepts using graphic design software.

Bachelor's Degree in Mechanical or Equivalent Engineering or college.

Familiar with the CATIA V5 3D design tool.

Are well organized and focused on projects.

Good oral and written communication skills in English and French.

Collaborate in a multidisciplinary team, you adapt easily to changes, and customer satisfaction is your number one priority.

Are customer focused, problem-solving and innovative focus as well.

Are autonomous, flexible and results-oriented through project management skills.

Have experience in the design or installation of cabinets to be assembled.
 
Job Number: 2377
Job Location: Montreal, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/03/2018
Last Updated: 06/04/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2395 - AVIONIC/ELECTRICAL SYS. ENGINEER - cv, word doc only

Description:
Support the Client Mod-line in Montreal by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Electrical and Avionic systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests

Track and ensure successful implementation of systems installations and modifications

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes

Develop good working relationships with various departments within BA and with all suppliers

Bachelor of Engineering Degree and eligibility for Professional Engineer registration.

AME license is an asset.

Have experience in providing engineering support to a Final Line/ Production.

Have 15 or more years%u2019 experience in aircraft electrical systems and or avionics systems (Electrical Generation, Distribution, Lighting, Navigation, Communication, Displays, EICAS, Data Concentration System, AFCS, Stall System, OMS, FDR, CVR etc).

Are Conversant with design, qualification and certification test requirements of Aircraft Electrical and or Avionic systems.

Have flexibility to travel.

Must be familiar with Part 25 certification requirements and advisory material.

Must be able to read and work with Electric Systems Schematic Drawings.

Possess strong integration skills, in both system partner management and system technical integration

Are familiar with Microsoft Office software tools

Have Strong communication skills, ability to work well in a multi-disciplinary team environment. Ability to communicate in both languages written and spoken would be a strong asset.

Experience in project management would be an asset.

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc). Regular Shift = Day (6:30 to 3:00); occasionally may have to support other shifts (as required).

Will travel to Toronto, Pitfield and Air Canada Hanger in Montreal.
 
Job Number: 2395
Job Location: Toronto, Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/26/2018
Last Updated: 05/29/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2399 - CABIN ELECTRICAL SYSTEM INTEGRATOR - cv, word doc only

Description:
Perform engineering integration of cabin systems, such as camera system, security system, lighting system, electrical doors and cabin management system (CMS), etc.

Insure that all new electrical designs conforms to Certification regulations (FAR, RAC, EU-OPS 1, etc.) and to Bombardier%u2019s design best practices.

Create required documentation such as technical white papers, functional diagrams, Technical requirement Documents (TRD) and statement of Work (SOW).

Create System definition documentation (ex. : ESSD, SDD et ICD).

Review and approve new cabin systems concepts and prepare related Aircraft integration documentation.

Create engineering requirements to integrate as part of the Functional Tests Engineering Requirements (FTER) and certification documentation related to cabin systems.

Complete the Electrical load Analysis for the cabin systems to be added to the Aircraft electrical load analysis.

Supplier coordination and follow-up.

Provide production support and answer promptly to raised issues according to their assigned priority level.

Perform troubleshooting when required, to minimize issues impact on customer and/or in production.

Bachelor in Electrical Engineering or equivalent and cumulated at least five (5) years of experience with aircraft electrical systems.

Familiar with FAR Part 25 and the Aircraft Electrical System certification regulations.

Experienced with Supplier management.

Have good knowledge of AutoCAD, et MS Office tools.

Bilingual (French & English) written and spoken.

Have ability to work with minimum supervision, within a multi-disciplinary team.

Proven record of leadership and technical problem solver.

Knowledge of Supplemental Type Certificate (STC) process.

Knowledge in the field of Electromagnetics considered an asset.
 
Job Number: 2399
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/01/2018
Last Updated: 05/18/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Electrical Engineers - Wichita, KS

Description:
STS AeroStaff Services is hiring Aviation Electrical Engineers in Wichita, Kansas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Responsible for providing engineering design support to Cessna Citation Service Centers in support of complex aircraft alterations. Manage small to large scale certification projects with responsibilities to include establishing systems design requirements, developing and presenting systems architecture concepts, completing systems design, and obtaining certification for the project.

Job Duties:

• Responsible for developing and completing complex engineering designs
• Ensures designs meet or exceed customers’ expectations and Cessna Quality and Safety standards
• Position requires a strong avionics/electrical systems background and the ability to conduct avionics and electrical systems testing both on and off the aircraft
• Works with Service Center personnel in reviewing customer requests for aircraft installations
• Evaluates feasibility of the requested alterations and provides alternate solutions if necessary
• Monitors and researches new technologies and FAA mandates for potential project opportunities to support the aftermarket
• Guides and directs activities to ensure timely and efficient completion of assigned projects
• Development of program schedules outlining key deliverables and establishing time lines for completion of tasks
• Responsible for identifying FAR’s (Federal Aviation Regulations) applicable to any given project and establishing a means of compliance for those regulations

Qualifications:

• Bachelor of Science in Engineering (Electrical/Mechanical) or related field
• An ability to develop wiring diagrams utilizing company electronic drawing tools is preferred

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 42332
Job Location: Wichita, KS
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 05/08/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 02/27/2017
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Electrical System Designer

Description:
Avionic Electrical Systems Designer does integration and implementation. (design, certification and system support). Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services. Contributes to planning, developing and coordinating of important engineering projects. Provides specialized technical assistance to team members. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems. Determines and develops own approach to solutions within schedule and cost objectives. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives. Acts as liaison with representatives outside of the assigned group/area Additional Functions. Actively works to improve daily processes and ensures all work meets customer requirements. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product. Performs other duties as assigned
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with



Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/30/2018
Last Updated: 05/18/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Avionics Electrical Systems Engineer

Description:
Avionics Electrical Systems Engineer assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.

Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/04/2018
Last Updated: 12/07/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Electrical Systems Engineers - Many Needed

Description:
Aircraft power / electrical / avionic systems design, integration and implementation. (design, certification and system support)
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
See Other Requirements in Job Description.
5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD
Email resume to: mmccarthy@pdstech.com
 
Job Number: Avionics/Sys-Gulf
Job Location: Savannah, GA
Rate: $60.00-$63.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 05/31/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
The Avionics Engineer will be responsible for the design, development, and integration of the assigned avionic systems for the aircraft.

Previous Garmin experience is required.

Duties and Responsibilities:
1. Define, plan, and develop complex systems level requirements to support the avionic systems for the HondaJet aircraft.
2. Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
3. Interface with suppliers to ensure technical requirements are met to support aircraft development need dates.
4. Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution.
5. Perform system evaluation and analysis to verify the system design compliance with functional requirements.
6. Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule.
7. Develop targeted system level enhancements to address customer feedback and product improvement initiatives.
8. Conduct system lab testing and aircraft functional testing.
9. Prepare presentations on avionics system design/development status.
10. Support system analyses for avionic systems.

Education, Work Experience, Certification and/or Licensure:
1. Minimum of 6 years to a maximum of 14 years aviation experience; 3+ years of experience working with integrated aircraft avionic/electrical systems in the areas of design engineering, system analysis, and system test.
2. Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronic Engineering.

Knowledge, Skills and Abilities:
1. Familiarity of avionics/electrical design requirements of 14CFRPart 23.
2. Proficiency in writing technical documentation and reports involving test data and analysis.
3. Familiarity with avionics/electrical test laboratories and lab equipment.
4. Working knowledge of system qualification requirements including DO-160F/G for environmental, DO-178B for software, and DO-254 for complex electronic hardware.
5. Familiarity with SAE ARP 4754 and ARP4761 desirable.
6. Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required.
7. Proficiency in requirements management tools such as DOORS, PLM tools such as TeamCenter and SAP is preferred.
8. Ability to manage and complete complex work assignments.
9. Ability to work independently and within a multi-functional team environment.
 
Job Number: 28-022
Job Location: Greensboro, NC
Rate: $50 - $60
Per Diem: Yes
Overtime: YES
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 05/02/2018
Last Updated: 09/26/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Firmware Engineer

Description:
ENEA Software & Services, in partner with an Aerospace client, are looking to fill an immediate opening:

Firmware Engineer
To work on a 6-9 month contract in Gig Harbor, WA

Responsibilities:
• Design, develop, code, test and debug system software.
• Interface with hardware design and development.
• Analyze and enhance efficiency, stability and scalability of system resources.

Experience Requirements:
• Related Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering or equivalent;
• 3-5 years’ experience developing real time embedded software;
• Proficiency with C, C++;
• An understanding of the prototyping and reverse engineering method of developing and certifying avionics;
• Familiar with source control and issue tracking systems;
• Willingness to follow rigorous processes for designing, implementing and testing code (DO-178B/C desired)
• Experience with DOORS, TI ARM processors, and Code Composer Studio desired;
• Ability to collaborate, innovate and bring technical zeal;
• Passion for aviation and familiarity with rotorcraft a plus!
 
Job Number: 583
Job Location: Gig Harbor, WA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 year
Start Date: May 15, 2018
Input Date: 05/02/2018
Last Updated: 05/18/2018
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician

Description:
Avionics Technician provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.
Education:
High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Four (4) years’ experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.
 
Job Number: 116864
Job Location: Savannah, GA
Per Diem: Yes
Input Date: 01/19/2018
Last Updated: 05/18/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Rashmi
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Avionics Technician 2

Description:
PDS TECH INC. is seeking Avionics Technician 2 located in Rancho Bernardo,CA.


Summary:

Performs a variety of duties in the electronic, mechanical, or electromechanical areas.
Constructs, troubleshoots, calibrates, adjusts, tests, and maintains equipment, components, devices, or systems.
Works from engineering drawings and written or verbal instructions.
Operates related equipment; conducts tests and reports data in prescribed format.
Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

 
Basic Qualifications:
*High School Diploma/GED and a min of 2 year of experience fabricating and testing aircraft electrical wire harnesses.
*Experience reading and working to wiring schematics, blueprints, parts lists, and other engineering documentation.
*Knowledge of Electro-Static Discharge (ESD) and Foreign Object Elimination (FOE) principles and experience working in an ESD and FOE sensitive environment.


Preferred Qualifications:
*Previous certifications for fabricating and testing electrical harnesses per IPC/WHMA-A-620.
*Previous certifications and experience soldering electrical and electronic assemblies per joint industry standard IPC J-STD-001.
*Previous experience with 5S practices and working in a lean manufacturing environment.
* AA Degree preferred.
 
 
Job Number: 1810085210
Job Location: San Diego, CA
Duration: 12 months
Input Date: 04/24/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mPTtAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Contractor (Custom Engineering)

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Must be proficient at creating design and compliance data to support after-market installations on all company models.
• Must understand FAA/ODA/Industry requirements associated with aircraft modifications.

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
 
Job Number: 24-213
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/03/2018
Last Updated: 08/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Buyer/Procurement Analyst

Description:
Description:
At Client Rotary and Mission Systems, we are driven by innovation and integrity. We believe that by applying the highest standards of business ethics and visionary thinking, everything is within our reach – and yours as a client employee. Client values your skills, training and education. Come and experience your future! Candidate will also be responsible for general purchasing of low to medium complexity Mechanical and Electrical commodities and sub-assemblies in support multiple Client’s programs. Candidate will engage with cross-functional teams to ensure supplier deliveries meet program performance, schedule and cost requirements. Adheres to policies, procedures, programs, systems and assure timely and economical procurement of all material, parts, assemblies, equipment and service.

Skill/Experience/Education:
Mandatory:
Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 3 years of professional experience; or 1 year of professional experience with a related Masters degree. Considered experienced, but still a learner.
 
Job Number: 08064
Job Location: Moorestown, NJ
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 08/24/2018
Firm Name: ICONMA LLC
Attention: Pritam Prince
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

CNC Machinist

Description:
CNC Machinist applies advanced skills in administration and use of procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. 2. Independently perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. 3. Set up and operate necessary test equipment in accordance with required documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. 4. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required maintenance data to ensure conformity requirements are met. 5. Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. 6. Demonstrate expertise and efficiency in repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. 7. Demonstrate expertise in use, maintenance, and calibration requirements of precision measuring and inspection tools such as, but not limited to, micrometers, calipers, bore gauges, multimeters, watt meters, spectrum analyzers, and borescopes. 8. Demonstrate expertise in the flow of materials and work order processes within the repair station. 9. Maintain and utilize all required paperwork in accordance with FAA Repair Station requirements. 10. Maintain a clean and orderly work area. 11. Comply with all company and legislative environmental health and safety regulations. Must be proficient in the setup and operation of 3-5 axis CNC Mills. Must be able to setup and operate conventional mills and lathes and use related precision measuring tools to inspect machined detail components to blueprints / 3D models.


CNC Machinist Lay-out, remove, fabricate and/or install major and minor repairs to flight controls and other secondary structure components using honeycomb core sandwich construction techniques, composite repair techniques, test bench procedures, hydraulic press procedures, and servicing carts. 2. Fabricate and repair sheet metal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. 3. Remove & install APUs and perform all required APU maintenance for all aircraft models 4. Perform repairs to electronic assemblies and subassemblies by removing and replacing circuit components, either through hole or surface mount, using acceptable soldering and circuit repair techniques. 5. Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. 6. Assist with training and instructing of other Acft Compo Repair I and II Techs. 7. Perform other duties as assigned.
HS diploma or GED. A&P license, FCC license, or NCATT cert preferred. Able to read/interpret blueprints, engrg docs and use/read precision measuring tools. Proficient in the operation of all tools & equip in the dept. Basic understanding of shop math. 4 yrs. experience in one of the following or other related expr: Sheetmetal, hydraulic overhaul, avionics/elect compo repair. Accredited schooling in electronics and elect sys may offset some experience reqmts. APU removal, install, service.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/04/2018
Last Updated: 12/07/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Product Definition & Verification (Checking) Designer III/IV

Description:
Creo Product Definition & Verification Checker III/IV

Location: Canoga Park, CA
Rate: $55-$60/hr DOE
Duration: 6 Month W2 Contract
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**Candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** 10 years as a drawing and model checker for Aerospace mechanical hardware**
** Strong proficiency using GD&T per ASME Y14.5 **
** 5-10 years Creo and Windchill PLM System **

Under limited general direction and following established procedures in accordance with contractual requirements and Company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

30% - Performs design calculations to validate any phase of design requirements.

20% - Estimation of resources and schedule required to complete a design activity and training to staff.

10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
-10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
 
Job Number: 8889
Job Location: Canoga Park, CA
Rate: 55-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 04/09/2018
Last Updated: 05/23/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II (Project Engineer) – Electric Thrusters ** Candidates must have Electric Propulsion or Plasma Physics education or experience ** WA

Description:
161793/8205016
Job Title: Component Product Engineer II (Project Engineer) – Electric Thrusters

Number of Positions: 1

Remaining Positions: 1

Additional Information: More resumes needed! Candidates must have Electric Propulsion or Plasma Physics education or experience.

** Candidates must have Electric Propulsion or Plasma Physics education or experience **


Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Seeking a motivated aerospace engineer to support our electric propulsion thrusters.
The selected candidate will help assure the success of space missions through development, qualification, and production of Hall, Arcjet, Ion, or other EP thrusters.
The candidate will demonstrate attention to detail and the highest standards of quality assurance for the production of mission critical hardware.
The candidate will also be a key resource in the design, development and testing of new electric propulsion products.

Typical duties will include assisting the program manager in manufacturing and delivering flight hardware, guiding integrated product development teams, and leading product proposals.
Additional duties will include performing technical analyses, conceptualizing new product designs, establishing system requirements and specifications, planning and conducting test and product verification activities, analyzing test data, developing new business relationships, and generating customer presentations.
Skills:
Required:

2 years of experience in propulsion, plasma devices, or mission-critical technology is required.
Must be proficient with Microsoft Office products (Word, Excel, and PowerPoint).
Desired:

Priority will be given to candidates with experience in electric propulsion including cathodes, plasma thrusters, Hall thrusters, ion thrusters and arcjets.
Priority will also be given to candidates with experience in a production environment developing and improving products and manufacturing processes.
Candidates should have strong technical writing and presentation skills, and should have experience working in teams.
Education:
A Bachelor's degree in Aerospace Engineering, Aeronautical Engineering, Astronautics, Mechanical Engineering or Physics is required.
A Master's degree or higher in an engineering discipline or physics is preferred.

Skills:
Required
PROJECT ENGINEERAEROSPACE ELECTRICAL

State/Province: Washington
City/Town: Redmond

Start Date: 04/30/2018 Hours Per Week: 40.00
Est. End Date: 10/28/2018 Hours Per Day: 8.00
Schedule Notes: 9/80 schedule. OT possible. Days Per Week: 5.00
 
Job Number: MB-8205016
Job Location: Redmond, WA
Rate: 53/hr max
Per Diem: no
Duration: 6 months
Input Date: 05/24/2018
Last Updated: 05/31/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Project Manager - E E Background (OK)

Description:
Basic Purpose/Accountabilities:
Accountable for project management activities, including front end loading, detailed design, and construction support for electrical projects at the Client Refinery Technical Services.

Accountable for small and mid-sized projects up to $30MM.

Primary Functions/Responsibilities:
Safety
• Manage electrical projects resulting in all work being conducted safely, environmentally friendly, and technically sound. All compliance requirements will be met.
• Complete all required safety training and adhere to applicable safe work practices and procedures.
Integrity
• Accountable and deliver on commitments
Responsibility
• Provide single point of accountability for project management and project expertise.
• Manage project costs, project schedule, personal resources, technical competency, environmental requirements and safety.
• Interact with Process, Instrument/Electrical Engineers, and Mechanical Engineers to coordinate project activities and coordination of assigned resources for completion of projects to meet project timeframes.
• Taking a lead role in electrical capital projects
Innovation
• Participate in and support the use of the Front End Loading and other demonstrated best practices in the execution of projects.
Teamwork
• Partner with customers to develop project charters, secure funding, engineer projects, support construction and provide assistance through the startup of projects.

Critical Skills:
• BS degree in Electrical Engineering
• Able to interact with Contractors

Leadership Criteria:
• Strong leadership skills
• Communicate clear and specific strategies
• Use technical/project expertise to contribute to success
• Establish priorities and develops critical tasks
• Engender trust
• Create free flow of information
• Encourage creativity, innovation and continuous improvement
• Drive company values and values of all people
• Strong business focus to ensure value adding activities are captured and implemented
• Excellent customer focus
• Ability to utilize functional knowledge and expertise to contribute to the success of the business

Experience with:
• Electrical design, technical expertise and engineering support related to refinery electrical equipment and power distribution systems.
• Project management including developing capital estimates, preparing funding, detail design, scheduling, construction and execution plans.

Other:
• Minimum of 5 years refinery project experience

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-50118OKPCR
Job Location: Ponca City, OK
Rate: $ BOE/HR
Per Diem: PD Split Possible
Overtime: Possible
Duration: 11 mos or longer
Start Date: ASAP
Input Date: 06/25/2018
Last Updated: 06/29/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification Checker III/IV URGENT CA

Description:
161675/8206731 (7812987)
Job Title: Creo Product Definition & Verification Checker III/IV

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **





** 10 years as a drawing and model checker for Aerospace mechanical hardware**



** Strong proficiency using GD&T per ASME Y14.5 **



** 5-10 years Creo and Windchill PLM System **





Under limited general direction and following established procedures in accordance with contractual requirements and Aerojet Rocketdyne policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.



40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.



30% - Performs design calculations to validate any phase of design requirements.



20% - Estimation of resources and schedule required to complete a design activity and training to staff.



10% - Provide technical guidance to less senior CAD designers and to design support personnel.



Skills:
-10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).

-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.

-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).

-ASME Certification in GD&T is a plus.

-Ability to read and interpret product definition and related specifications.

-Electronic markup tools and the ability to work paperless is required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.


Skills:
Required
GEOMETRIC DIMENSIONINGCREOGEOMETRIC TOLERANCINGWINDCHILLAEROSPACE
Additional
PACKAGING ENGINEERINGHARNESS CABLING

State/Province: California
City/Town: Canoga Park

Start Date: 04/30/2018 Hours Per Week: 40.00
Est. End Date: 10/28/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-8206731
Job Location: Canoga Park, CA
Rate: 60/hr max
Per Diem: no
Duration: 6 months
Input Date: 04/25/2018
Last Updated: 05/23/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cyber Software Engineer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Required Experience:



  • 5-10 years in aerospace/defense industry

  • 4 years of relevant experience in the fields of computer processing technology, PP, AT, or Cybersecurity

  • Experience in requirements generation, design, development, integration, and testing of systems for military applications

  • Experience with weapon systems, processing timelines, and real-time operating systems

  • Experience leading and advising DoD customers on PP issues

  • Experience with program protection concepts, anti-tamper, cryptography, and security solutions

  • Familiarity with documentation and tools such as: DoD 8500 series, DoD 5200 series, NIST Special Publications (800-53, 800-37, etc.)

  • Active DoD Secret Security clearance with ability to obtain Top Secret clearance

  • Project management experience


 


Desired Experience and Skills:



  • DoD Top Secret clearance with current SSBI within last 5 years

  • Cyber Certifications in accordance with DoDD 8570/DoDD 8140 such as CISSP, GSLC, CEH

  • Aircraft/store integration experience

  • Experience briefing customer communities on PP, AT, or Cybersecurity


 


Education Required:



  • BS, Electrical Engineering or Computer Science

  • MS, Electrical Engineering or Computer Science Desired


 
Job Number: O8197317
Job Location: Northridge, CA
Rate: 80-100
Per Diem: Yes, Split
Overtime: Yes
Duration: 1 year+
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
DESIGN VERIFICATION ENGINEER

Description:
Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

KBRwyle is seeking an individual to perform analog verification and research of advanced analog mixed signal integrated circuit blocks. The applicant must be familiar with analog, RF and mixed signal design/fabrication and the associated EDA design tools. Other duties may include designing test articles to evaluate security principles. The selected applicant will represent KBRwyle and DoD customers in outside discussions and technical forums. This position will require some travel. The selected candidate will meet eligibility requirements for a DoD a security clearance.

Required Skills & Experience
An MS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required. A strong understanding of design principles, parasitic interactions, and post-fab test is required.

Desired Skills and Experience
Additional experience in digital circuit design is desired. Familiarity with advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is desired. Familiarity with at least one (1) commercial scripting programming language such as PERL or Python is desired.
 
Job Number: KM0013
Job Location: Dayton, OH
Rate: OPEN
Input Date: 05/03/2018
Last Updated: 05/18/2018
Firm Name: MIDCOM CORPORATION
Attention: Kristine M.
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 4 (Electrical Systems Design)

Description:
Design and Analysis Engineer 4

Location: Everett, WA
Duration: 3 months

Job Description:
Generic Statement of Work:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

Specific Statement of Work:
777X Air supply, support of Qualification testing (coordination between Client Electrical AR and supplier around Qual test procedure review/approval, Qual failures/root cause, Qual reports/analysis/similarity…), DMDT inputs, Paper ICD, FSD, Slate, and Certification documentation.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 622-Electrical Systems Design

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 18-07302
Job Location: Everett,, WA
Input Date: 04/30/2018
Last Updated: 06/04/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design/Mechanical Engineer-Cabin Interiors

Description:
Design/Mechanical Engineer-Cabin Interiors
Savannah, GA
Rate: $55.00/HR

Unique Skills:

Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
 
Job Number: 8982
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/24/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer

Description:
* Looking for someone with SolidWorks Composer software exp (it’s a CAD Model animation software package)
* Although the emphasis is Mechanical Design, the ideal candidate should have some exposure to electrical design drawings as well.

Summary

The Designer will prepare rough sketches, with a focus on Mechanical Design and Drafting, by studying customer specifications and creating a picture of the system, components and/or parts to support sales and marketing.

Duties / Responsibilities:
> Applies standard design practices through the use of welding, machining, manufacturing and assembly drawing symbols, descriptions and call outs.
> Prepares final drawings by studying engineering sketches, specifications and supporting documents.
> Develops layouts of the system, sub-systems, and parts; identifying dimensions, angles, curvatures, tolerances and materials
> Maintains engineering data base by entering data and completing backups.
> Mechanical design of enclosures, test fixtures and detailed electronics packages utilizing SolidWorks modeling software; design components for various fabrication processes including milling, turning, injection molding and sheet metal forming.
> Creates designs with appropriate dimensions, tolerances and part finishes while considering manufacturing technology; generates fabrication/assembly drawings of components & assemblies using ASME Y14.5 standards
> Reverse engineer complex components and assemblies; contributes to team effort by accomplishing related tasks as needed.
> Develop / design of fabrication & assembly drawings of system components/assemblies
> Resolve discrepancies by collecting and analyzing information, conferring with engineers, vendors, technicians and clients
> Identify & verify specifications by examining engineering docs & performing calculations

Job Requirements / Experience:
> 7+ years’ work experience in computer aided drafting with an Associate’s Degree in Mechanical Design or equivalent technical school training; U.S. Citizen is required
> 3-D modeling, SolidWorks (preferred)
> Experience in mechanical design and layout preferably in specialized packaging solutions
> Must have good mathematical background to handle common calculations
> Experience with machine processes, mechanical fabrication, materials and assembly processes a plus
 
Job Number: 023_2018
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: Long-Term / Temp-to-Perm
Start Date: ASAP
Input Date: 10/15/2018
Last Updated: 10/16/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

Digital Design Engineer

Description:
Job Description:


  • Client is seeking an individual with specialized skills in digital design tools with a firm background in computer operating systems and processes necessary to develop Client and unique digital circuit blocks and apply advanced algorithms in next generation silicon processes.

  • Primary job functions will include system administration, installation, and maintenance of an advanced circuit design environment consisting of commercial- and government- developed electronic design software.

  • Other duties may include supporting analog and RF design, developing standard cell libraries, and testing fabricated chipsets.

  • The selected candidate will represent our Client and DoD customers in outside discussions and technical forums.

  • This position will require some travel and require a security clearance.




Required Skills & Experience


  • A BS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required.

  • The applicant must be familiar with the Red Hat enterprise operating system or comparable Linux distributions, installation, maintenance, port security, backup, and shell scripting.

  • Familiarity with installation and maintenance of the advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is required.

  • The applicant must be capable of debugging and troubleshooting electronic design tool installation/maintenance and interaction with 3rd party tools and process design kits.

  • Experience in deriving verification test benches from detailed specifications is required.

  • Familiarity with at least one (1) commercial scripting programming language such as

  • PERL or Python is required.




Desired Skills and Experience

Additional experience in digital circuit design is desired, including: Verilog/VHDL behavioral modeling, Digital IC design for manufacturing (JTAG insertion, test vector generation, Built-In Self-Test), an understanding of physical design issues including layout, familiarity with memory compilers, Cadence Skill code development, and fundamentals of Process Design Kits (PDKs).



Special Requirements/ Certifications:

Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs
 
Job Number: 18-12267
Job Location: Dayton, OH
Rate: 0.0USD/Hour
Per Diem: SPLIT
Overtime: Possible
Duration: 2018-08-10 00:00:00.0
Start Date: 2018-05-13 00:00:00.0
Input Date: 03/27/2018
Last Updated: 12/13/2018
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
DoD Secret - Sr. Electrical Engineer with active secret MD

Description:
161900/5289

Job Title: DoD Sr. Electrical Engineer - Maryland
Job Category: Engineering

Work Site Address : Columbia, MD, 21046
Job Number: 5289
Max Pay Rate: TBD
Start Date: 5/30/18
End Date: 5/30/19
Position Type: Contract
Active secret to start


Job Description

Roles and Responsibilities
Provides design expertise, guidance and consulting services throughout the project lifecycle. Plan, design, model, and analysis normal, mission critical, and backup emergency power systems for commercial and government facilities. Responsible for electrical designs on projects, preparing reports and specifications, and providing a high level of technical leadership.

Represents the Architectural and Engineering Services Group in interactions with the project’s sponsors, contractors, and other project team members.

Performs analysis, design and documentation of large and small complex building electrical systems including site and building power distribution, lighting, lightning protection, fire alarms, mission critical and emergency electrical systems.

Performs equipment selection, equipment specification, system design, system layout, field investigation, and construction administration.

Prepares, analyzes and reviews electrical models using SKM Power Tools and review of electrical system calculations.

Works with an experienced group of engineers to prepare construction contract drawings and specifications consistent with system and sponsors requirements and standards.

Takes responsibility for the project electrical requirements, addressing any electrical design issues.

Establishes electrical project budgets and schedules.

Prepares reports and studies that present technical information in a clear and concise manner.

Contributes to the overall business development of the company.

Required:
Bachelor’s degree from accredited university in an electrical engineering discipline.

8+ years of relevant experience in three phase power system design and engineering.

Experience should include building power systems (normal, mission critical, backup power generation, protection, and related control systems)
Excellent verbal and written communication skills, with an emphasis on the ability to organize and present design information to sponsors.

Excellent communication skills essential for team-based working.
Familiarity with applicable industry codes and standards.

Ability to write reports and assess electrical systems and construction quality.

Desired Qualifications:
P.E. Registration (E.I.T. will be accepted in lieu of P.E. for exceptional candidates).

SKM Power Tools and AGI32 experience.

Proficiency with the latest version of AutoCAD and REVIT.

Design experience with governmental sites, data centers, and coordination and arc flash studies.

Experience with testing and commissioning of electrical systems.
US citizenship and the ability to obtain and maintain DoD clearance is required. Travel may include both domestic and international short-term assignments depending on project requirements.

Candidates for interviews shall present a portfolio demonstrating and substantiating their experience, technical capabilities, project management experience, and ability to meet position requirements.
 
Job Number: JK-5289
Job Location: Columbia, MD
Rate: open
Per Diem: no
Duration: 12 months
Input Date: 05/17/2018
Last Updated: 05/25/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer/Electrical Wire Designer III - (PA)

Description:
Supports the EDI Wiring Process & Tools teams to instantiate the necessary improvements driving quality and efficiency across BDS. Coordinate design teams across BDS enabling commonality at all levels of design. Coordinate a multi-disciplined and international team to achieve the EDI Deployment and Sustainment of the Capital Logic Component Library and Symbol Library. Primary duties include:

Enter and update parts in library as appropriate
Enable commonality of EDI Design and Standards across BDS
Execute BDS Library change control board decisions (both for components and symbology)
Develop necessary configuration control mechanisms and process documentation to enable a common library system that can support rapid design additions as well as multi-program derivations
Coordinate and support reduction of the backlog of parts and symbol entry needed for each program deployment. Support Deployment Specialists to keep program need dates up to date and hold program accountable to provide specification sheets when required for part entry
Coordinate the efforts of the distributed team of core librarians entering parts and symbols into the tool
Responsible for the overall quality of each component and symbol in the Capital Tools Suite Library
Provide guidance and query responses to core librarians
Coordinate and attend international calls to destinations such as India at reasonable hours for both parties.

Works under general direction.

Baseline description: Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers. Works under general direction.


Additional Experience Requirements:
Familiarity in wire design, wire installation
Experience in harness design.
Knowledge of Electrical System Design and best practices.
Knowledge of part standards.
Experience in Computer Aided Design and drafting standards.
Familiarity with Configuration and Data Management.
1 -2 to years of experience with the Mentor Graphics Capital tools suite (including Logic, HarnessXC, and Library)
Familiarity with CAD Tools, such as CEEDS, as well as EXCEL spreadsheets

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: EETechDesPA
Job Location: Ri, PA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 04/09/2018
Last Updated: 05/25/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

EHI Engineers

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, system, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
 
Job Location: Savannah, GA
Input Date: 07/07/2014
Firm Name: INCONEN CORPORATION
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: cathy@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ELECTRICAL DESIGNER

Description:
JSG is looking for an Electrical Designer for 12+ months contract opportunity in Reno, NV!

Description:

Prepares preliminary and detailed electrical and communication physical arrangement drawings, electrical wiring diagrams, schematics, Bill of Materials, foundations drawings, grounding plans, raceway plans and site grading plans under the direction of the engineering department.

Must have experience working with hybrid drawings containing both vector and raster components.

Ability to follow standards and maintain project drawing files and associated records/documentation.
Expert in the use of AutoCAD and Visio.
Knowledgeable in standard drafting practices for construction. Good basic math skills.

Experience in electrical equipment drafting, including racks, cabinets, power panels, cable tray, wiring diagram and assemblies.
Able to read measuring devices.
Ability to provide creative input/suggestions and set up drafting processes.

2+ years applicable experience required. 2 year technical degree or more preferred. MS Office, Windows 7, SharePoint file management, etc.

Must be able to work a reasonable amount of overtime, and to do site survey and to perform escorting as required.
 
Job Number: 365396
Job Location: RENO, NV
Per Diem: If qualified
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 04/20/2018
Last Updated: 05/21/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ELECTRICAL ENGINEER - Midwest, OK

Description:
This position will support our Air Traffic Control and Landing Systems (ATCALS), B-1 and B-52 customers, by solving electrical sustainment issues. The sustainment projects address obsolete components in multiple instrumentation, control, power, electronic, electro-mechanical interface systems. The engineer will:
• Provide technical solutions
• Diagnose malfunctions in existing components and make improvements or modification to produce the desired results
• Develop technical documentation and publications relating to users, systems, processes, work flows, operations, products, and services.
• Create new electrical schematics
• Ensure proper system artwork generation
• Implement design changes of existing components
• Write engineering change orders
REQUIREMENTS
This position requires a Bachelors in Electrical Engineering. The candidate must have good oral and written communication skills. The candidate must have the ability to obtain a security clearance.
PREFERRED SKILLS
Aerospace, DOD or ATCALS experience are definite pluses. The ideal candidate will have experience with circuit design, signal/power analysis, instrumentation, EMI/radar and programming skills. Skills in SolidWorks Electrical and NI Circuit Design Pro are also preferred.
 
Job Number: KM0012
Job Location: Midwest, OK
Rate: OPEN
Input Date: 05/03/2018
Last Updated: 05/18/2018
Firm Name: MIDCOM CORPORATION
Attention: Kristine M.
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ELECTRICAL ENGINEER III - ELECTRONIC DESIGN

Description:
Johnson Service Group is currently looking for an Electrical Design Engineer for a Temporary position with our Customer in Warrendale, PA. through 2018

The Electrical Design Engineer will be responsible for design, layout, testing, and evaluation of electrical and electromechanical devices and systems. They will work as part of a multi-disciplinary product development team to assess customer needs, generate and analyze concepts, create requirements and specifications, and perform formal risk assessments. They will design parts and sub-assemblies, participate in cross-functional design reviews, and support the transition of projects from development to manufacturing and field service. They will create schematics, wiring diagrams, system diagrams and PCB layouts as well as check drawings to ensure they meet specification and follow best industry practices. Most importantly, the EE exhibits the desire and ability to collaborate, and excels in teamwork and communication. Our Customer is all about continuous improvement, and this professional thrives in such an environment.



Essential Functions:

Responsible for the design, and analysis of complex level electrical systems, equipment and PCB assemblies.
Conduct feasibility studies of new and modified designs exercising judgment within broadly defined practices and policies in selecting methods, techniques, and evaluation criteria.
Work on complex multi-product level problems where analysis of situations or data requires an in-depth evaluation of various factors.
Direct support personnel in the preparation of prototype fabrication.
Participate in multi-disciplinary technical teams to research, develop, test and evaluate solutions.
Evaluate issues and failures to determine root cause and potential solutions
Work on intermediate level component and subassembly problems where analysis of situations or data requires an in-depth evaluation of various factors.
Collaborate with software, mechanical, testing and other cross functional teams to perform FMEAs and risk assessments.
Mentoring and coordination of other engineers.
Direct support of customers, to include travel to off-site locations as necessary to evaluate field issues.
Educational Requirements:

BS degree in Electrical Engineering or equivalent
Required Knowledge and Skills:

4+ years of Electrical Engineering experience
Experience the electrical and cross functional aspects of a formal product development environment including schematic capture, PCB development, Bill of Materials, MRP systems and associated tools (including Orcad or Altium).
Demonstrated experience designing electrical and robotic subassemblies and systems
Understanding of architectural design concepts of machine controls and I/O systems
Able to effectively solve problems, work independently on system level designs and multi-task as required.
Good interpersonal and communication skills
Self-starter, capable of working independently as well as building strong cross functional collaborative relationships.
Must be able to work in a team environment and assist cross functional teams with the debugging of complex issues.
The candidate must be highly motivated to work in a fast-paced environment.
Strong written and verbal communication skills.
Proficient with the Microsoft Office Suite of Products.
Must be legally authorized to work in United States
Preferred Knowledge and Skills:

Familiarity with PCB development including footprint generation and PCB layout a plus.
Familiarity with motion controllers, servo- and stepper- motors, and networked I/O systems a plus.
Experience with Product Lifecycle Management (PLM) tools and ECR, ECO processes.
Experience in LabView
Working experience with FDA regulated, ISO13485, or other highly regulated environments.
Work Conditions:

Office Environment
 
Job Number: 364448
Job Location: Warrendale, PA
Per Diem: Possible
Overtime: Possible
Duration: 12/2018 +
Start Date: ASAP
Input Date: 04/04/2018
Last Updated: 05/21/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS 3-D Wire Router

Description:
EWIS 3-D Wire Router - Cabin Development

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
Ideal Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to:
- 3D wire routing
- EWIS
- Cabin Management System
- Cabin Entertainment System
- Cabin Lighting
- Cabin Switch Controls
- Telephone System
- Satellite communications
- Water System
- Waste System
- Cabin interior monuments
- Seats

Education and Experience Requirements:
High School Diploma/GED required
 
Job Number: 9081
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/04/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS 3-D Wire Router - Cabin Development

Description:
• In Cabin Development, we design, engineer and certify the next generation of cabin interiors.

Education/Skills
• Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to:
3D wire routing, EWIS, Cabin Management System, Cabin Entertainment System, Cabin Lighting, Cabin Switch Controls, Telephone System, Satellite communications, Water System, Waste System, Cabin interior monuments, Seats

Software experience preferred:
• Catia V5
• SmarTeam
• Capital Logic (Mentor Graphics)
• Office Suite (Word, Excel, Power Point, Outlook)
 
Job Number: 24-247
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 05/04/2018
Last Updated: 08/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

EWIS Expert

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for EWIS Expert for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

As a global engineering expert in aircraft Electrical Wiring Interconnection Systems, you will coordinate with contracted suppliers, interface with all other aircraft functions and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft System development and Certification;
 
Scope of Work:
         Work as Global engineering expert as part of the EWIS team
         Basic work scope is to participate in the development and finalization of the aircraft T/C design, compliant to all applicable requirements.
         This activity includes:



  • Evaluating the current aircraft design, with respect to compliance to the EWIS related airworthiness regulations of JCAB, FAA and EASA,
  • Coordinate activities related to defining the ESSDs required to generate wiring diagrams
  • Support verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.
  • Coordinating integration of design change activities originated from EWIS requirements when required, run unit base and manage aircraft level changes for EWIS group
  • Responsible for tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, technical calculation, interface discussions with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
  • Coaching and Education of company members about professional knowledge in the EWIS domain.
  • Interface with other suppliers as appropriate.
  • Provide technical expertise and assist in resolving the EWIS issues during any rig testing or flight testing.
     


 



 
Job Number: 1710075244
Job Location: Nagoya,
Duration: 12 months
Input Date: 03/16/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023L1VAAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical ( EWIS )

Description:
Electrical EWIS Engineer develops electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required

Electrical EWIS Engineer selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/15/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer

Description:
Location: Savannah, GA
Rate: $60.00 - $67.00/HR
Duration: Long Term Contract
Shift: 1st Shift

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- EWIS knowledge.
- Wire Harness Routing.
- Wire Harness Installation.
- CATIA V5 Electrical Workbench.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 9100
Job Location: Savannah, GA
Rate: $60.00 - $67.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/08/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7977
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/21/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer -TSII

Description:
UNIQUE SKILLS
Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
Essential Functions
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 18-813-123182
Job Location: Southeast
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Unique Skills:
• Required As a Electrical Applications Engineer (TSII) at Gulfstream you will develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
• Select qualified electrical components such as connectors, backshells, and other parts.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired
 
Job Number: 24-243
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 05/11/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift
Per Diem Split: Yes (if eligible)
Overtime: Possible

****MUST be a U.S. Citizen or Permanent Resident****

Unique skills:
- Required as a Electrical Applications Engineer (TSII) at Company you will develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
- Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
- Select qualified electrical components such as connectors, backshells, and other parts.
- Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
- Aerospace Experience is required
- Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
- Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
- Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 8914
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/07/2018
Last Updated: 05/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Electrical Applications Engineer has experience with AutoCAD required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

Electrical Applications Engineer assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/29/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First


Unique Skills:
-Experience with Autocad required; Aerospace experience required.
-Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required.
-Be Familiar with CFR 14 Part 25 and AS50881.
-Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts.
-Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.

Job Description:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7059
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 05/22/2018
Last Updated: 05/23/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Applications Engineers

Description:
Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. Mentor L-Cable
 
Job Location: Savannah, GA
Input Date: 07/07/2014
Firm Name: INCONEN CORPORATION
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: cathy@inconen.com
Website: www.inconen.com

Avionics Engineer

Description:
JOB SUMMARY:
Principal responsibilities include design and integration of aircraft avionics and electrical systems for modifications.
JOB RESPONSIBILITIES:
• Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD, Mentor Graphics and/or IAI HarnesSys)
• Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft
• Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents
• Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc.
• Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.
• Assist with the development, design, testing and certification documentation for new or modified printed circuit board modules for aircraft
EDUCATION/ EXPERIENCE:
• At least 2 years of related experience
• Bachelor’s Degree (or equivalent industry experience) in: Electrical Engineering, Computer Engineering or Electrical/Electronic Engineering Technology, or related technical degree.
• Electronic drafting experience with CATIA-CADAM Drafting (CCD), Mentor Graphics and/or IAI HarnesSys desired.
• C/C++ and assembly programming experience or coursework desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus.
• Experience with avionics and electrical system design to the requirements of CFR 14 Parts 23 & 25 is desired.
• Experience with 3D modeling and drafting using CATIA V5 file based/Enovia and/or CATIA V6/Enovia is beneficial.
 
Job Number: 87958
Job Location: multiple
Rate: open
Per Diem: possible
Overtime: possible
Duration: Long Term
Start Date: ASAP
Input Date: 07/25/2018
Last Updated: 12/13/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
No Clearance Required.

Experience and expertise in Ethernet IP in Cyclone IV designs (Altera Tri-speed Ethernet Controller)

Experience in reverse engineering schematic capture designs

Experience in JTAG development a plus
Experience in FPGA designs for RF design a plus

Experience and expertise in the latest ZBT RAM customized controllers a plus
 
Job Number: 41964
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 06/14/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Performs design and drafting of both electrical and mechanical aspects of electronic equipment. Lays out printed circuit boards; designs wiring harnesses; performs layout drawing and checking of schematic diagrams as supplied in rough form by electrical engineering; makes wiring diagrams from schematic diagrams (vice-versa). Performs overall chassis and housing design/drafting, including overall system packaging. Designs front panels, chassis, brackets, card cages. Assists in selection of components such as connectors, terminals strips, switches. Produces schematic diagrams and/or CAD drawings for submission to customers, plant, operations or outside vendors to produce the specified wiring harnesses, printed circuit cards, mechanical support to batteries, LRU and generating elements specified to assemble a complete electronic device. Output must be able to be entered directly into data management configuration control.
 
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 05/08/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer (Contract) - Areospace - Los Angeles Area

Description:
Keltia Design in Everett, is a technical support services company supplying technical recruiting, CAD training, and engineering design services to customers in the Aerospace industry on a permanent or contractual basis.

Responsibilities include the design, development, qualification, and documentation of technical data packages, which are used for electrical systems modification programs involving commercial transport category aircraft. Additionally, provide engineering support for existing manufactured product through investigation, problem resolution, ECN/EO and drawing revision documentation.

Relevant experience creating wiring diagrams and drawings, wire
drawings, PLC, schematics, routing and clipping installation drawings,
and wire harness fabrication drawings. Note, an understanding of ATA
Chapter Codes, the use of aircraft manuals (IPC, M/M, and W/D), and
the use of electrical production illustration drawings is desirable.
Experience with Airbus is required

A Bachelor degree and experience utilizing CATIA V5 and/or AutoCad is preferred. If you are interested please email me your updated word formatted resume, with your salary requirements and availability
 
Job Number: KELT315
Job Location: LA, CA
Per Diem: Possible
Overtime: No
Duration: 6mo+
Start Date: ASAP
Input Date: 05/03/2018
Firm Name: KELTIA DESIGN INC
Attention: Mary
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Autocad Electrical System Design Engineer (Contract) - Areospace

Description:
Keltia Design in Everett WA, is a technical support services company supplying technical recruiting, CAD training, and engineering design services to customers in the Aerospace industry on a permanent or contractual basis.


Requirements:

10+ yrs. experience of electrical system design for aircraft.
Understanding of AC/DC power supply, power requirement for different LRUs

Experience with the main power supply panel at the FWD and AFT of the airplane.
Experience with electrical switches.
Expertise with wiring diagram in AutoCAD
Experience with Cable assembly/wire harness assembly in CATIA. Cable assembly routing from Main power supply panel to individual LRUs.
Experience with electrical installation drawing in CATIA.

REQUIRED: Expertise with AUTOCAD Electrical Design

If you are interested please email me your updated WORD formatted resume, with your desired rate and availability.
 
Job Number: KELTIA070618
Job Location: ORE
Rate: DOE
Per Diem: Yes
Overtime: Yes
Duration: 6mo.
Start Date: ASAP
Input Date: 07/12/2018
Firm Name: KELTIA DESIGN INC
Attention: Mary
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Designer

Description:
Prefer design experience with relevant applications in a defense environment. Ability to create and interpret electrical and mechanical drawings. Ability to apply EE concepts and formulas at the subsystem level. Ability to independently design, test, integrate, and document designs to a simple subsystem level based on provided requirements. Ability to independently create PCB layouts and complete the design of boards of medium complexity. Ability to test and troubleshoot existing released vehicle subsystems. Ability to independently support customers (manufacturing and field) with vehicle and box level problems. Expert knowledge of CAD drafting/modeling and design techniques. Good planning, time management and organization skills. Good communication and interpersonal skills. Ability to explain concepts to personnel unacquainted with the field of expertise. Good presentation and report writing skills. Ability to work as part of a team. Ability to make presentations to department managers and staff. Ability to train less experienced staff.
 
Job Location: MN
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 05/08/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Eng wCatia V5

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required
 
Job Number: 18-16742
Job Location: Southeast
Per Diem: Split
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 07/11/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Electrical EWIS Engineer

Description:
Electrical EWIS Engineer Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative 

Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required





Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job. 
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/04/2018
Last Updated: 12/07/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
No Clearance Required.

•Power supply design experience of 8 years or more.
•Experience in Mentor Graphics Schematic capture.
•Experience in PAD’s layout tools.
•Omnify configuration tools experience is a plus.

•Experience in DC/DC, AC/DC and PFC designs.
•Familiar with custom designs and if needed use of MCOTS power converter bricks such as SynQor and Vicor.
 
Job Number: 41792
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 06/14/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
JOB SUMMARY
Reporting to the Engineering Manager the Electrical Engineer plans, designs, and oversees the installation, operation and maintenance of electrical/electronic components, equipment, and systems. Furthermore, acts as a focal point/ individual contributor with respect to electrical and electromagnetic compatibility compliance to industry/regulatory requirements and standards for airborne applications such as RTCA DO-160 or MIL-STD-461E.
Performs conventional, moderately complex engineering assignments that may involve component, equipment or product design, simulation, testing, and preparation of specifications, process studies, and/or research investigations. Instructions are provided on task specifications and design constraints. Close guidance on new design or applications is provided
JOB RESPONSIBILITIES
• Electrical Engineer applies standard engineering techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.
• Performs low to medium complex circuit/wiring design activities and, subsequently, prepares appropriate validation and verification means.
• Supports product certification/qualification with subject matter knowledge and exercise professional judgment whilst supporting other business functions.
• Typically focuses on existing products or processes.
• Liaises with drafters, technicians, and others to contribute to project completion.
• Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.
• Performs other related duties as required.
• Bachelor's degree in Electrical Engineering from an accredited four-year college or university; and three-to-five years related professional experience.

• Aerospace industry experience is strongly preferred.
• Must be proficient with basic physical laws/techniques as applied in electrical engineering (e.g. Ohm’s Law, Kirchhoff’s Laws), electromagnetic characteristics of materials, electrical circuit theory, two-pole and four-pole theory, Maxwell equations, and basic linear/digital/power electronics.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/09/2018
Last Updated: 10/05/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
- Military ground vehicle wiring harness and cabling design experience - Experience working with electrical/electronic systems of military ground vehicles
- Working knowledge of Visio Technical, Pro-E, Pro-Cable and/or CADDS 5
- System, subsystem and component specification development and the process to verify specifications
- Low voltage (28Vdc) power distribution and management (Solid State Power Controller/Programmable Power Controller)
- Vehicle Signal management (Sensor/Transducer Input/Output signal management)
- Smart Display Unit
- Working knowledge of military electrical connectors and electrical cabling specifications
- SAEJ1939 CANBus, Mil-Std – 1553, 10/100 and Gigabit Ethernet Protocols
- Integration of military communication/antenna systems including BFT, SINCGARS, DAGR, CREW2
- Responsible for technical decisions, which may impact project completion.
- Specify and design components from system, subsystem, or configuration item requirements and demonstrate through modeling, simulation and analysis or test that these requirements are met.
- Prepares engineering documentation (specification, ICDs, design documents, and technical/test reports) and complete technical data packages.
- Prepares cost estimates and schedules for assigned electrical design projects.
-Prepares Change Notices, Engineering Change Proposals and Engineering Orders as required to complete assignments.
- Monitors procurement, manufacturing, and delivery of components through purchasing and manufacturing departments to ensure that schedules are met.
- Guide drafters and designers in creating clear and releasable documents.
-Provides regular status reports to supervisor, project engineer, and customers as needed.
 
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 05/08/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Seeking an Electrical Engineer for one of our clients in Pittsburgh, PA.

Job Description:

The candidate must have a strong background in utility distribution design work package development including, but not limited to overhead, URD (underground residential distribution), and underground cable/conduit design work packages.

Additional experience in utility distribution construction and construction supervision preferred.

This design experience must include complex overhead and underground distribution projects in urban and rural environments in compliance with client's engineering and construction specifications, field engineering of project requirements, identification of conflicting utilities, engineering and design calculations, and work permit development.

Candidate must comply with quality control and safe work practices and maintain compliance with project scope, schedule, and budget. This position will be a member of a design team comprised of engineers, designers, and CAD technicians.


Job Duties:

Designing of overhead, URD, reconductoring and asset replacement projects.
Underground cable/conduit distribution projects in urban and rural environments.

Maintaining compliance with client engineering and construction specification.

Identification of conflicting utilities.

Performing engineering and design calculations and work permit development.

Maintain quality control and safe work practices and while maintaining compliance within the project scope, schedule and budget.

Our portfolio includes large energy projects for utilities, power generation owners, and industrial clients, as well as working with an established group of industry-leading construction partners.


A Bachelors Degree in Electrical Engineering.

Minimum of 0-2 years of experience with electric utility distribution design and construction projects.
Candidates with experience that exceeds the listed requirements may be considered for a higher level position.

Field work will be required which will require the following:
Ability to walk two miles.
Ability to swing a 5 lb. Hammer.
Ability to stake poles.
Open to overnight travel/travel in general.
 
Job Number: 29327
Job Location: Pittsburgh, PA
Rate: $21
Per Diem: Possible
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 05/07/2018
Firm Name: TAD PGS INC
Attention: Si Nguyen
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 714/622-3967
800 Phone: 800/261-3779
Fax Phone: 714/897-8455
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Savannah, GA
Rate: $52.00 - $57.00/HR
Duration: Long Term
Shift: 1st Shift

**MUST be a U.S. Citizen or Permanent Resident**

Required Skills:
- Experience designing data acquisition systems for aircraft and test lab environment.
- Working knowledge of force, flow, pressure and temperature sensing technologies.
- Knowledge of ARINC bus architectures; 664, 429, 825
- Experience with IADS data display and analysis software

Education and Experience Requirements:
Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 8930
Job Location: Savannah, GA
Rate: $52.00 - $57.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/07/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
JOB SUMMARY

Electrical Engineer Reports to the Engineering Manager and a member of a given integrated product team, the Electrical Engineer will participate in the development of new aircraft system designs, modifications to existing designs, and new customer introductions.

JOB RESPONSIBILITIES

• Responsible for the design assigned including manufacturability, assembly, and meeting cost and weight targets
• Responsible for Bills of Material
• Responsible for following up/communicating with purchasing, prototyping, testing, and manufacturing to ensure high quality of design.
• Detail design of electrical integration into aircraft cabin monuments
• Design for manufacturability and assembly
• The design and detail modeling of a variety of monument components in order to meet the program requirements
• Production detail design and support development
• Delivery of detail design into BOM
• Ability to make trade-offs to yield optimum results, achieving cost, weight, functionality and reliability goals
• Managing and meeting cost and weight targets
• High attention to details in the design
• Communicating effectively and professionally with customers and suppliers
• Participating in Design Reviews throughout each phase of the New Product Introduction process
• The selection and application of materials and processes appropriate to each design element
• Ensuring the successful integration of each design element with the product as a whole
• Following and contributing to the development of the Best Practice guidelines as laid out in Quality documentation
• Checking engineering packages
• Generating and/or revising specifications
• Participating in the validation of the product (using such methods as prototyping, test, DFMEA)
• Detail design of work packages
• Coordinate and consolidate electrical design from various product sites
• Good communication and leadership skills
• Travel up to 10% both domestically and internationally
• Any other reasonable engineering related duties

• Bachelor's degree in Engineering from a four-year college or university; and three-to-five years related experience and/or training; or equivalent combination of education and experience.
• MS Word, Excel and Outlook
 
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/13/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer develops electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/30/2018
Last Updated: 05/18/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Cabin Systems)

Description:
• Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and System. This includes:
o Cabin interior monuments and Seats
o Cabin Management System
o Cabin Entertainment System
o Cabin Lighting and Cabin Switch Controls
o Telephone System
o Satellite communications
o Water System and Waste System
o EWIS

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad engineer experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-208
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (TSI)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Principal Duties and Responsibilities
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline

Unique Skills:
• Experience designing data acquisition systems for aircraft and test lab environment.
• Working knowledge of force, flow, pressure and temperature sensing technologies.
• Knowledge of ARINC bus architectures; 664, 429, 825
• Experience with IADS data display and analysis software

Experience/Education:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job
 
Job Number: 24-244
Job Location: Savannah, GA
Rate: $52-57
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 04/16/2018
Last Updated: 08/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - AutoCAD

Description:
Cabin Management systems, in-flight entertainment. Military avionics experience may be considered. AutoCAD
 
Job Number: 18-12794
Job Location: TX
Per Diem: Split
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 11/27/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Cabin Development

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Ideal Candidates will have electrical engineering experience with Cabin Interiors and Systems to include but not limited to: - Cabin Management System - Cabin Entertainment System - Cabin Lighting - Cabin Switch Controls - Telephone System - Satellite communications - Water System - Waste System

Education:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
 
Job Number: 24-257
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 05/18/2018
Last Updated: 08/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Cabin Development

Description:
Electrical Engineer - Cabin Development

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
Ideal Candidates will have electrical engineering experience with Cabin Interiors and Systems to include but not limited to:
- Cabin Management System
- Cabin Entertainment System
- Cabin Lighting
- Cabin Switch Controls
- Telephone System
- Satellite communications
- Water System
- Waste System

Education and Experience Requirements:
High School diploma required
 
Job Number: 9077
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/04/2018
Last Updated: 06/26/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Secret Clearance REQUIRED

Description:
Government Contract - Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs

ROLE AND RESPONSIBILITIES
Provide electrical engineering support to Research, Development, Test and Evaluation (RDT&E) programs for military aircraft/weapon systems, including planning, directing, and/or participating in aircraft and laboratory testing. Prepares procurement specification inputs, interface drawings, installation design packages, and calibration procedures to accommodate unique test requirements. Oversees systems modifications, installation, integration, and checkout functions. Performs test planning, data collection, and test data analysis. Functions entail providing support for electrical power quality testing and evaluation, including voltage and frequency transients/modulation, voltage distortion, and power interruption on various aircraft, shipboard, ground vehicle, and vendor prototype components and equipment. Functions involve applying engineering principles to modify and upgrade laboratory electrical and instrumentation systems in support of power and propulsion RDT&E programs. Projects will interface test articles with programmable power supplies and data acquisition equipment to conduct power quality tests, followed by analysis of test article responses for compliance with MIL-SPECS/MIL-STDs. In particular, candidate must have experience with Interface Standards for input power to military and aircraft contained in MIL-STD-704, military vehicles contained in MIL-STD-1275, and FAA RTCA DO-160. That experience must also include interpreting guidance for test procedures specified in MIL-HDBK-704 parts 1 through 8. Position also requires knowledge of test planning, data collection, data analysis, test report writing, and presentation of results. Further requirements include specialized knowledge and experience in the design, installation, operation, calibration, maintenance and repair of power quality test facilities, associated equipment, and their control systems. Duties may include performing other tasks for propulsion and power as directed.

Candidate must be able to obtain/retain a Secret level DoD security clearance, and may be required to perform other tasks on an as-needed basis. Position is located in Patuxent River, MD.


REQUIREMENTS
Education: Bachelor's Degree in Electrical Engineering (EE) from ABET accredited university required with a minimum of 8 years' experience supporting RDT&E to include 6 years performing functional aspects as described in the roles and responsibilities.
Master's Degree in Electrical or other Engineering related discipline a plus.

Experience: Experience working with research, development and testing with respect to requirements and characteristics of propulsion and power equipment performance.
Experience must include conducting tests to generate extreme power conditions meeting specification for standardized test regimes then conducting performance tests of electronic and electrically-powered equipment after exposure to test conditions.
Applying test conditions to include extremes with respect to voltage, frequency, modulation, distortion, and other characteristics.
Performing tests post exposure to extreme conditions to verify operation remains within specification and the equipment continues to function reliably in-service.
Experience with MIL-STD-704, MIL-STD-1275, and FAA RTCA DO-160 required.
Must have demonstrated experience directing, monitoring, and/or participating in the installation, configuration, calibration, and operation of engine test systems, environmental chambers, associated instrumentation, and/or data acquisition systems used for testing propulsion and electrical power systems.
The candidate should be capable of managing programs including writing proposals, developing program plans, and providing briefing material.


Knowledge, Skills and Abilities:
The candidate should be capable of managing programs including writing proposals, developing program plans, and providing briefing material.
Functions involve applying engineering principles to modify and upgrade laboratory electrical and instrumentation systems in support of power and propulsion RDT&E programs.
Applying analysis and test methods demonstrating equipment compliance to power characteristics.
Ability to develop test plans, design test equipment, establish protocols and procedures specific to individual test articles following guidance provide in DoD, FAA, and other documents.
Knowledge in applying programmable power sources with appropriate software and firmware needed to generate waveforms specified by test standards.
Knowledge of MIL-STD-704 and the eight parts of MIL-HDBK-704 for aircraft systems.
Knowledge of MIL-STD-1275 for Military Vehicles.


Equipment and Machines:
Ability to operate office equipment such as personal computer, printer, copy machine, telephone, fax machine and other equipment including desk supplies and other work related tools as required.
Ability to operate power test systems to include programmable AC/DC power sources, power analyzer, test management and control systems, laboratory measuring, environmental chambers and other equipment required to provide test conditions, manage test sequences, and perform measurements of test parameters.
Ability to perform or facilitate calibration and repair of laboratory testing and measurement systems.


Attendance: Monday-Friday. Regular attendance of scheduled hours is extremely important, but not critical, except for deadlines and meetings.
Punctuality and regular attendance are necessary to meet deadlines.
Must exhibit flexibility of work hours to adjust to surge situations based on critical mission requirements that may require evening and weekend hours.
Must demonstrate professional behavior at all times when dealing with customers, management and co-workers.
Must have clear, concise and accurate communications skills, both verbal and written.
Grooming and dress must be appropriate for the position and must not impose a safety risk to employees or others.
Must maintain a positive work atmosphere by behaving and communicating in a professional manner.
Independent personal transportation to work site is required.
Some travel is required to support projects; this may involve airline travel.
Power quality testing will typically be performed in a laboratory environment.
Some test protocols may require testing in the field and potentially in a shipboard environment.

PREFERRED SKILLS
Prior DoD acquisition work experience is preferred. Familiarity with NAVAIR Propulsion and Power Laboratories and related competencies also preferred.

ADDITIONAL NOTES
Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.

Special Requirements/ Certifications:
Candidates must be a U.S. Citizen 
 
Job Number: 18-17413
Job Location: Patuxent River, MD
Rate: $40-45/hr
Per Diem: SPLIT
Overtime: Possible
Duration: 3 Month Contract-TO-Hire
Start Date: ASAP
Input Date: 05/10/2018
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Electrical Engineer 2 - O/M - LA

Description:
Chipton-Ross is seeking a Electrical Engineer 2 for an opening in Avondale, LA.

RESPONSIBILITIES:
Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned shipboard systems. Candidate will perform the following: Research, development, and design of electrical components, equipment, systems, and networks in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve vendor proposals; review, comment on, adjudicate and approve vendor furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testing; develop drawings and other documents IAW Mil-Specs and contract drawings; interface with other disciplines and departments to ensure a seamless integration of assigned systems into the shipboard environment; address and resolve technical issues, and make decisions on problems in his/her area of responsibility; support shipbuilding production department as required.

REQUIRED EXPERIENCE:
Bachelor's of Electrical Engineering with two years of engineering experience or Master's of Electrical Engineering with no prior experience, or similar degree background. . Previous shipbuilding experience is highly desired. A qualified candidate should be proficient in Microsoft Office applications and AutoCAD 2014.

ADDITIONAL EXPERIENCE:
It is preferred that the candidate be familiar with shipboard Interior Communications systems such as Switchboards, Telephone systems, Announcing, TV and Audio, Alarms, Indicating, etc. and have an understanding of the typical shipboard interfaces, interconnections, and integration requirements. Familiarity with electrical power distribution systems, control systems, and C4ISR systems is a plus. Current clearance is also a plus.

EDUCATION:
Bachelor's of Electrical Engineering

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 155942
Job Location: Avondale, LA
Rate: $42 to $46.00 DOE
Duration: 1 year
Input Date: 06/03/2016
Last Updated: 12/13/2018
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer AAP

Description:
• Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
• Wiring diagram creation, Wire harness creation, Wire installation drawing creation. Competent in circuit design, voltage, shielding.
• Able to coordinated vendors, manufacturing and other engineering personnel in development and testing to resolve problems. Usage of Auto cad and Catia V5. CHS is a plus but not required.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
• Languages Required (in addition to English): None

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job
 
Job Number: 24-235
Job Location: Savannah, GA
Rate: $62-$67
Per Diem: yes
Overtime: yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 03/20/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer/PCB Design Engineer

Description:
--STEPPER MOTOR EXPERIENCE REQUIRED--

Senior electronics designer with a solid electronic product design skills used in complex electromechanical projects involving maintenance of life of on-market products. May lead small teams of engineers in the completion of project goals. Full responsibility of the design from concept through prototyping and leading into integration in final production line. Must have the technical ability to oversee and guide staff towards the completion of project goals. Applies familiarity with the FDA’s guidance on medical device development to ensure compliance.

Provide Core Electrical Engineering expertise:
a)Circuit design and analysis skillset, including in-depth understanding of technologies currently used in the industry.
b)Analog and digital circuit design
c)Expertise in computer-aided electrical design tools (eCAD)
d)Testing circuit performance
Use experience in board level (PWA) manufacturing and current practices, including
a)Analyzing component specifications and creating internal specifications as needed
b)Interacting with new and existing vendors and managing vendor relationships
c)Managing eCAD outputs per customer practices and ensuring that customer designs are properly executed by external contract manufacturers in support of R&D activities.

About Enea
Enea is a global supplier of network software platforms and world class services, with a vision of helping customers develop amazing functions in a connected society. We are committed to working together with customers and leading hardware vendors as a key contributor in the open source community, developing and hardening optimal software solutions. Every day, more than three billion people around the globe rely on our technologies in a wide range of applications in multiple verticals – from Telecom and Automotive, to Medical and Avionics. We have offices in Europe, North America and Asia, and are listed on Nasdaq Stockholm. Discover more at www.enea.com and start a conversation at info@enea.com.
 
Job Number: 575
Job Location: Chicago, Il
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 year
Start Date: April 23, 2018
Input Date: 05/02/2018
Last Updated: 05/18/2018
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineering Manager

Description:
Electrical Engineering Manager needed for an immediate full time opportunity with our client in Burlington MA. As a key contributor you will serve a dual-role taking on technical engineering responsibilities and manage, mentor and develop a small staff of electrical and firmware engineers. Please apply below and call me today for immediate consideration. Thank you.



James St. Pierre - Branch Manager - Nesco Resource, LLC - 603.417.3001 - jstpierre@nescoresource.com



Key Responsibilities and Activities


  • Provides electrical engineering recommendations and technical support on electrical engineering reviews, strategic plans, and projects

  • Assists with allocation, budgeting, resource planning, and scheduling

  • Manages unit and development cost estimations and helps determine affordable and reliable material sources

  • Ensures on-time product development by collaborating with other leaders to estimate reasonable and precise schedules and solve problems quickly

  • Streamlines production while meeting compliance and safety guidelines

  • Creates production, quality validation, and evaluation requirements and tests and troubleshoots production dilemmas

  • Establishes technical standards in reviews, documentations, and designs


Required Skills and Experience


  • Bachelor\'s Degree in Electrical Engineering with 7+ years\' experience in the automotive, aviation, or robotics industry

  • Experience with multiple hybrid and electric vehicle electronic architectures

  • Experience with CANbus

  • Experience with schematic capture and PCB layout using modern EDA tools

  • Experience with automotive, robotics or aviation/aerospace wiring harness and connector component sourcing

  • Experience with automotive, robotics or aviation/aerospace product development

  • Experience with design control and change management techniques


Desired Skills and Experience


  • Master\'s Degree in Electrical Engineering or related field

  • Knowledge of Embedded coder, Simulink, autocode generation process, RTE generation, and bootloaders

  • Familiarity with the ISO 26262 specification




 
Job Number: 18-13443
Job Location: Woburn, MA
Rate: 140000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-23 00:00:00.0
Input Date: 04/04/2018
Last Updated: 05/18/2018
Firm Name: NESCO RESOURCE
Attention: James St Pierre
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Electrical Engineers

Description:
Vehicle systems integration
 
Job Location: OH/MI/IN
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineers - Many Needed

Description:
Must have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement.
. 10 yrs. in the specific technical discipline or 15 yrs. broad engineering experience in several technical disciplines with Bachelors, or 8 yrs. in the specific technical discipline with Masters, or 6 yrs. in the specific technical discipline with PhD

Email resumes to: mmccarthy@pdstech.com
 
Job Number: Electrical-Gulf
Job Location: Savannah, GA
Rate: $60.00-$63.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 05/10/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Eng wCatia V5 - TS II

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
• EWIS knowledge. Wire Harness Routing. Wire Harness Installation. CATIA V5 Electrical Workbench.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Principal Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-256
Job Location: Savannah, GA
Rate: $60 - $67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/17/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer-Special Missions

Description:
UNIQUE SKILLS
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 17-783-115282
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Loads Analysis Engineers - Many Needed

Description:
**Must be degreed
Job Responsibilities will include but not be limited to:
- Develop and document electrical load analysis based upon system design.
- Provide coordination memos with impact analysis for systems design changes.
- Present results of analysis at customer design reviews (PDR, CDR)
- Publish reports detailing the aircraft electrical load and bus capability.
- Utilize existing software to complete Electrical Load Analysis

*Email resumes to mmccarthy@pdstech.com
 
Job Number: BO-OK-Loads/ELE
Job Location: Oklahoma City, OK
Rate: $68.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 9 Months+
Start Date: ASAP
Input Date: 06/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power-Loads Engineering Contractor - Special Missions

Description:
UNIQUE SKILLS
Required Experience in the following:
• Electrical Power Generation, control and indicating
• Power Distribution, control and indicating
• Electrical Load Analysis

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Project Management Skills/Experience
• Configuration change management
 
Job Number: 17-742-103561
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Last Updated: 07/20/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Project Engineer

Description:
Electrical Project Engineer

Company: UTAS
Location: Windsor Locks, CT
Pay Rate: $58/hr
Duration: 12 Month W2 Contract
Shift: First
Openings: 1
Travel: Potential travel of 1 trip per quarter.
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
*NO RELOCATION COMPENSATION**

Description:
Manages a team and provides direction on research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

Additional Job Details
-We are now looking for highly motivated and technically sound individuals to join us as an Electrical Project Engineer.
-You will be supporting programs in developing new electronic controller products and will learn aspects of engineering and program management and have the opportunity to see the entire design build and test life cycle.
-Electrical products are typically controllers driving rotating machinery (pumps/fans/actuators) and have built in sensor/data acquisition systems with serial interface controls. They are designed for long life, high reliability and operate in severe space radiation environments.
-Some of these products include: process controllers, sensor signal conditioning, DC/DC Converters, FPGA based digital controllers, brushless DC motor controllers, actuator control/drives, hardware based closed loop system process control, and more.
-Candidates shall have 3 to 7 yrs experience in new electronics design and/or electronics testing.
-Candidates must have the desire and energy to ability to manage/lead the Integrated Product Development Team subject matter experts to ensure the electronics are designed, tested and verified to the requirements while controlling the project budget and scope.
-Project Management Professional training is a plus.

Requirements:
-Bachelors degree or higher
-Strong project/program management experience
-3-7+ years of electronics design/testing
 
Job Number: 8921
Job Location: Windsor Locks, CT
Rate: 58
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 04/13/2018
Last Updated: 08/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design & Analysis Engineer V - (AZ)

Description:
ACTIVE SECRET CLEARANCE REQUIRED TO START.

Avionics Systems Engineer responsible for avionics software/hardware integration on the Apache Area Weapon System (AWS). Responsibilities include complex avionics development activities including pursuing advanced technologies, performing trade studies, developing technical approaches, decomposition, flowdown and traceability of system and software requirements, and system/subsystem verification testing. The purpose of the work is to perform gun scoring and analysis. Will be a member of a cross functional integrated product team. Responsible for close coordination with US Army and international customers to ensure implementation is responsive to requirements, using appropriate project integration methodologies, and project management practices. Work with customers to develop and document complex electronic and electrical system requirements. Analyze and translate requirements into system, hardware and software designs and interface specifications. Test and validate to ensure system designs meet operational and functional requirements. Monitor supplier performance to ensure system integration and compliance with requirements. Solve problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Research specific technology advances for potential application to company business needs.

The ideal candidate must be able to design, develop, test and present complex electrical and networking systems that utilize sensor technology. Exposure to missile, gun, or rocket technology is highly desired. Control theory expertise desired.

Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEaz
Job Location: Mesa, AZ
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 04/03/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Electrical Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Aircraft power / electrical / avionic systems design, integration and implementation. (design, certification and system support)

Job description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7677
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 05/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Unique Skills:
• Avionics System Integration Experience Require, Honeywell Epic System Experience Preferred

Position Purpose:
• Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Performs other duties as assigned
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-215
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 05/17/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technician

Description:
Major purpose:



General duties expected of a technician to include test, troubleshoot, repair, modify, and inspect product maintained in the shop to component level. Products include a mix of analog, RF, and digital circuits across through hole, surfacemount, and Ball Grid Array technologies. Must be proficient with PCs to operate with multiple data bases, M/S Office applications, and Automated Test Equipment. Will routinely use general purpose and specialized test equipment including multimeters, Oscilloscopes, Signal Generators, Power Meters, Network and Spectrum Analyzers.Additional Job Requirements:



Applicant at a minimum must meet the requirements for the classification of Technical Associate II. Minimum qualifications for this position are an AA Degree in electronics or equivalent combination of schooling plus experience in an applicable environment. Preferred candidate should have knowledge of electronic theory relating to RF transmission, receiver circuits, analog and digital circuitry. Ability to troubleshoot RF circuits with working knowledge of spectrum analysis, coax cable measurements and calibrations is required. Prior experience in the procedures, practices, inspection methods, materials, and equipment used in maintaining TCAS and Transponders and/or experience working within an FAA Part 145 Repair Station or Part 21 Production Approval Holder highly desired. Candidate must comply with DOT(FAA) drug and alcohol screening requirements.
 
Job Number: 18-14748
Job Location: Phoenix, AZ
Rate: 24.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-03-29 00:00:00.0
Start Date: 2018-03-26 00:00:00.0
Input Date: 04/12/2018
Last Updated: 06/05/2018
Firm Name: NESCO RESOURCE
Attention: Samir Nye
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/31/2017
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronic Systems Design & Analysis Engineer III- (HB)

Description:
- Developing electronic and electrical flight control system solutions
- Participating in modification projects for flight control hardware and software designs based on platform requirements
- Executing systems and software testing to verify operational and functional requirements
- Managing hardware/software suppliers' performance to ensure customer requirements are met
- Supporting resolution of product integration & field operation issues
- Researching new technologies for potential application to C-17
- Developing solutions to technical problems of safety of flight scope and impact
- Applying solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
- Integrating into teams and collaborating with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
- Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
- Work with customers and their representatives to obtain feedback for product enhancements and corrective actions.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEIIIHB
Job Location: Huntington Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/11/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronic Systems Design & Analysis Engineer IV - (OK)

Description:
Must be able to obtain a Security Clearance.

We are seeking Communication / Network System Design engineers within Avionics and Flight Controls Engineering organization of the Military Airlifter Program in Oklahoma City, OK. This is a senior level position in Avionics and Flight Controls Engineering organization of the Military Airlifter Program in Oklahoma City, OK. Working under the supervision of Lead Engineers, selected candidates will quickly integrate into the team and collaborate with multiple engineering disciplines in the specification, test and support of airborne electronic subsystems including sensors, controls, communications, displays, and processors. The candidate will participate in projects aimed at solving issues and implementing their solutions utilizing Agile methods and processes. The candidate will have the opportunity to work with customers and their Boeing representatives to obtain feedback for product enhancements and corrective actions.

Tasks may include:
Development of electronic and electrical system solutions
Participation in modification projects for basic hardware and software designs based on platform requirements
Execution of systems and software testing to verify operational and functional requirements
Management of hardware/software suppliers' performance to ensure customer requirements are met
Supporting resolution of product integration & aircraft production issues

An ideal successful candidate possesses technical and engineering skills already developed while attaining his/her Science degree(s) and entry level work experience. Excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization is a must. The selected candidate will be tasked to develop solutions to technical problems of limited scope and impact; and to apply solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

The selected candidate will integrate into our Agile Development teams, where personal attributes that include ownership, responsibility, and commitment are a must. The candidate will be expected to interact professionally with customers, suppliers, field representatives, and fellow engineers. The candidate must be dependable, innovative, an independent thinker, and possess excellent & creative problem solving skills. The candidate should have demonstrated 'hands on' capabilities in class projects and/or previous work experience or hobbies. The candidate should also be able to demonstrate through past experience his/her capability to work independently, persevere, and generally 'find a way' when roadblocks are encountered.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK29919
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/09/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronic Systems Design & Analysis Engineer IV - (WA)

Description:
Generic Statement of Work: Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

Specific Statement of Work: 777X Air supply, support of Qualification testing (coordination between Boeing Electrical AR and supplier around Qual test procedure review/approval, Qual failures/root cause, Qual reports/analysis/similarity…), DMDT inputs, Paper ICD, FSD, Slate, and Certification documentation.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEIVWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 3+ Months
Start Date: ASAP
Input Date: 04/30/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Assembler

Description:
Under limited supervision performs a wide variety of tasks through verbal or detailed instructions in support of a manufacturing/production environment with no instructions needed on routine work, and general instructions given on new lines of work or special assignments.
Duties include assembly, disassembly, re-assembly, fabrication, minor repair and/or minor rework of surface mount and/or through hole printed circuit card assemblies, sub-assemblies, and/or electro-mechanical assemblies.
RF experience is a plus. Duties include (but not limited to) board and/or component preparation, touch up, manually soldering components.
Performs modifications or upgrades or removal of and/or replacement of standard electro-mechanical, surface mount, through hole components.
May perform in-process self checks on items prior to submitting to formal inspection and/or test personnel. Works with electronic/electrical hand tools using drawings, wire lists and technical repair standards.

Hourly Rate: $17
 
Job Number: KM0010
Job Location: Chesapeake, VA
Input Date: 04/27/2018
Last Updated: 05/18/2018
Firm Name: MIDCOM CORPORATION
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Design Engineer

Description:
Location: Orlando, FL
Rate: $50.00 - $55.00/HR
Duration: 6 month contract position
Schedule: 9/80

**Candidates must be U.S. Citizens**

Duties:
- An Electromechanical Design Engineer is responsible for the design, documentation and production floor support of hardware (missile electronics, missile electrical cabling, airborne support equipment, ground support equipment and test sets.
- Additional duties include investigation of discrepant hardware and test anomalies.

Skills:
Required:
- Design experience with electrical cables, test sets, breakout boxes, 19” support equipment rack design
- Proficiency with Creo Parametric 2.0 Cabling and Intralink.
- Proficiency with ASME Y14.5M-1994 and generating detailed engineering drawings.
- Proficiency with reading schematics for electrical cable assemblies in order to define and select connectors, backshells, splices, wiring, etc.
- Basic computer skills and a working knowledge of Microsoft Office products (Word and Excel)
- Compliance to quality and safety policies at all times!
- Must be a US Citizen
- Physical Requirements – This work requires delicate handling, reaching, light lifting and may require a combination of sitting and standing as well as walking between test locations and occasional use of small step-ladders.

Desired:
- Experience with design of flexible and semi-rigid RF cables

Education:
- Must have at minimum a Bachelor of Science degree in an Engineering related discipline.
 
Job Number: 8769
Job Location: Orlando, FL
Rate: $50.00 - $55.00/HR
Per Diem: Per Diem Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 03/15/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Design Engineer FL

Description:
161672/7809667
Job Title: Electromechanical Design Engineer

Number of Positions: 1

Remaining Positions: 1

55/hr max

Duties:
** Candidates must be U.S. Citizens **



An Electromechanical Design Engineer is responsible for the design, documentation and production floor support of hardware (missile electronics, missile electrical cabling, airborne support equipment, ground support equipment and test sets.


Additional duties include investigation of discrepant hardware and test anomalies.
Skills:
Required:

Design experience with electrical cables, test sets, breakout boxes, 19” support equipment rack design
Proficiency with Creo Parametric 2.0 Cabling and Intralink.
Proficiency with ASME Y14.5M-1994 and generating detailed engineering drawings.
Proficiency with reading schematics for electrical cable assemblies in order to define and select connectors, backshells, splices, wiring, etc.
Basic computer skills and a working knowledge of Microsoft Office products (Word and Excel)
Compliance to quality and safety policies at all times!
Must be a US Citizen
Physical Requirements – This work requires delicate handling, reaching, light lifting and may require a combination of sitting and standing as well as walking between test locations and occasional use of small step-ladders.
Desired:

Experience with design of flexible and semi-rigid RF cables
Education:
Must have at minimum a Bachelor of Science degree in an Engineering related discipline.

Skills:
Required
DESIGN ENGINEERENGINEEREXCELMICROSOFT OFFICEWORD
Additional
ANALOG SILICONAPQPCABLINGCREODOCUMENTATIONGROUND SUPPORT EQUIPMENTMICROSOFT EXCELMICROSOFT WORDMISSILEPARAMETRICRACK DESIGNREADING SCHEMATICSRFSCHEMATICSWIRING

Minimum Degree Required: Associate's Degree (Community College, MBO)

State/Province: Florida
City/Town: Orlando

Start Date: 03/26/2018 Hours Per Week: 40.00
Est. End Date: 09/28/2018 Hours Per Day: 8.00
Schedule Notes: Days Per Week: 5.00
 
Job Number: MB-A7809667
Job Location: Orlando, FL
Rate: 55/hr max
Per Diem: no
Duration: 6 months
Input Date: 06/21/2018
Last Updated: 06/22/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Engineer

Description:
Electronic Engineer for one of our clients in Vancouver, WA.

**Candidate must have a Secret Security Clearance**

Job Description:
Provide professional engineering expertise/assistance to engineering design and field personnel regarding all aspects of documentation:
Assist with the documentation of Telecommunication projects by providing scoping input for concept design documents and producing detailed design drawings, draft bills of materials, and draft statements of work
Review and disseminate all provided documentation of status reports by Field Engineers; may require facilitating project documentation efforts and providing documentation oversight.
Perform basic filing and document management.
Assist with Telecommunication equipment inventory maintenance.
Participate in teams to research and document existing telecommunication and related equipment, including wire tracing.
Mark up “As Built” prints for drawing development in CAD software, documenting anomalies and any pertinent issues.
Verify circuit data via company’s TCIS database (Telecom Circuit Information System).
Research and report on missing information from data sheets, recording appropriately.
Report weekly to company Manager, providing Field Engineer status updates.
Access energized facilities and radio station facilities for a general review of system configuration, spacing and rack layouts. (Requires Access Worker Permit, see page 4).
Facilitate and provide coordination for the design and construction of various facilities including project scheduling and estimating upon request and supervision of company manager/personnel.
With oversight and approval from company staff, prepare to scope input for concept design document, detailed design drawings, bill of material, or procurement specifications for equipment, verifying that technical tradeoffs have been considered and that decisions conform to existing policies and standards and are within budgetary constraints.
Prepare comprehensive final hardware design packages for assigned projects, including final detailed design drawings, draft statements of work (construction and contract), and all other documents for the telecommunication equipment installation, layout, wiring, and testing for review and approval by the company staff.
Participate in events at specific project sites, including scoping meetings, equipment installation, and testing phases.
Education/Experience:
A Bachelor’s Degree in Engineering, preferably in Telecommunications Engineering or a closely-related field is required.
Level 1 position: ½ to 4 years of experience in Telecommunications Engineering or closely-related field is required.
Proficiency with Microsoft Office Suite products, such as Word, Excel, PowerPoint, and Outlook (Microsoft Office 2010 proficiency required).
Technical Requirements:
Must know engineering concepts, principles, and practices.
Skill in oral and written communication to effectively fulfill client/customer/team requirements.
Experience or knowledge regarding managing and providing coordination for the design and construction of various facilities including project scheduling and estimating is desirable.
Experience or knowledge regarding the review and evaluation of design packages (including drawings, material certifications and submittals for conformance to the design specifications) is highly desirable.
Ability to analyze complex installations, facilities or structures using the latest techniques and applicable codes.
General Requirements:
Carry out assigned tasks with a professional demeanor reflected in excellent written and oral communication skills, listening skills, patience, analytical reasoning and problem-solving abilities.
Meet timelines, milestones, deliverables and provide timely status updates.
Participate and perform effectively in a project team environment and effectively manage multiple work assignments and changing priorities.
Obtain appropriate manager/personnel approval for all recommendations and drafted materials.
Ensure proper identification of self as a contract worker in all communications, correspondence, etc.
Additional Requirements:
The selected candidate will be required to sign a company Non-Disclosure Agreement (NDA) as a condition of the contract assignment.
Offsite Work may not be performed without prior approval from the Client Manager.
All information associated with work performed offsite must be maintained in the company network environment. No company information will be allowed to be transmitted, stored and created, etc., on the contract worker's devices. Contract personnel must follow all company and government-wide security, asset management, and cybersecurity policies and procedures.
Offsite work may only be performed within the company service area unless approved by the Supplemental Labor Management Office (SLMO). Contract personnel must keep their employees informed of their work location at all times and must coordinate any changes with their employer and SLMO before the change occurs.
Approximately 20% local and overnight travel to field locations is required (PPE Required)
Up to 5% Overtime may be required
Frequent walking on uneven terrain.
Valid U.S. drivers license is required
First Aid/AED/CPR Certification required within 30 days of assignment start.
The worker/employer is responsible for maintaining current certification.
Personal Protective Equipment (PPE) is required for all field travel:
Must obtain and maintain an Access Permit (see the following appendix) as a condition of this assignment
ASTM F2413-11, Class 75EH rated footwear with over the ankle lace up and rigid sole and heel. Arc Flash-rated footwear requirements: The exterior of the boot must be made entirely of natural materials - all leather or a leather and rubber combination.
White Hard Hat required for Access Permit holder
Electrical and Arc Flash protective clothing and PPE as required by OSHA and consistent with company Safety and health policy for electric work inside and around company substation facilities (Occasional User - estimated usage 4 - 5 days per month)
Eye protection
Hearing protection
Dust Mask
Hand protection (work gloves) as needed.
Other appropriate/required PPE, as required by State or Federal OSHA for the work to be performed.
 
Job Number: 29323
Job Location: Vancouver, WA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 1 year, could go longer
Input Date: 05/08/2018
Firm Name: TAD PGS INC
Attention: Terry Bentley
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 714/622-3967
800 Phone: 800/261-3779
Fax Phone: 714/897-8455
Website: www.tadpgs.com

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 04/07/2017
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Specialist

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Electronics Specialist
(U.S. Citizenship Required*)
Tallahassee, FL
2018-5914

Responsibilities:
• Perform troubleshooting of production hardware including but not limited to circuit cards, harnesses, electrical boxes and vehicle harnesses.
• Perform routine testing of production hardware at the box and circuit card level using automated, semi-automated bench top equipment.
• Perform troubleshooting of production electro-mechanical production hardware
• Support Test Engineering and Manufacturing Engineering in the identification and resolution of production yield issues and customer returns/complaints.
• Adequately record results in troubleshooting, testing and investigations to ensure all aspects of our Quality and Manufacturing systems are fulfilled.
• Performing hand-check testing on certain hardware using appropriate meters.
• Work with Test Engineering to trouble-shoot test station issues and write documents for items not working properly.
• Write up test equipment issues

Qualifications:
• Must be familiar with the use and operation of various types of test and measurement equipment to include; oscilloscopes, digital multi-meters, power supplies, logic analyzers, bus analyzers etc.
• Must be computer literate and familiar with standard computer applications like MS Word & Excel, email, etc
• Able to learn our systems at an accelerated pace.
• Familiarity with DITMCO and VXI a plus.
• Able to read, interpret, and use drawings and schematics for troubleshooting of production hardware.
• Must be a US citizen capable of obtaining a Security Clearance.
• Able and willing to work overtime during the week and weekends.
• Must be able to wear PPE including protective shoes and glasses.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Associated Degree in Electrical or Electronics Engineering Technology (ASEET) or equivalent (additional experience or military training will be considered in lieu of degree)
• 2-5 yrs related work experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5914
Job Location: Tallahassee, FL
Rate: Based on experience
Input Date: 05/03/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Jeremy Israel
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Electromechanical - 3 / active secret preferred / CREO / electronic packaging CA

Description:
1631
Engineer Electromechanical - 3 (Job Number: 18002041)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Mar 19, 2018

Target End Date: Mar 15, 2019

Pay Rate: $58/hr. - $60/hr.

Work Week: 9/80

Location: Redondo Beach, CA

Duration: 1 year

The responsibilities include mechanical design & analysis using computer-aided design (CAD), conducting packaging trades, tolerance and interference analyses, generating drawing packages & associated electronic data, and supporting the fabrication, assembly and test of the hardware.


Basic Qualifications:

•5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.
•A Bachelor of Science degree in a STEM (Science, Technology, Engineering or Math) discipline
•Electronic packaging, CAD, or mechanical design experience in an aerospace environment
•Demonstrated technical skills with experience supporting a multi-disciplined team
•Experience working with different partners across organizations and programs
•Proficient in performing tolerance and interference analyses
•Experience in generating and releasing product detail and assembly drawings
•Experience with PTC Creo / Intralink software applications



Preferred Qualifications:

•A Master’s Degree in Mechanical or Aerospace Engineering and 4+ years of engineering experience in an aerospace environment
•Experience with electronic packaging / mechanical design for airborne & space applications
•Electronics design development and sustaining experience spanning cradle to grave
•Experience with Enovia PLM software application
•Proficiency with electrical design, electronics manufacturing processes and qualification activities
•Familiarity with research and development of advanced packaging technologies
•Active DoD Secret or Top Secret, and/or SCI clearance
 
Job Number: MB-1631
Job Location: Redondo Beach, CA
Rate: 58-60/hr
Per Diem: no
Duration: 12 month contract
Input Date: 06/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer III MUST HAVE DO-178B / EXPERT-LEVEL in ANSI C and ASSEMBLY / LOW LEVEL SW & device drivers CA

Description:
Job Title: Engineer III
Work Site: Irvine, CA
Job Number: 5493

Start Date: ASAP
End Date: 12/31/18
Position Type: Contract
60/hr max
6 months +

Job Summary

Can work remotely.
MUST HAVE DO-178B / EXPERT-LEVEL in ANSI C and ASSEMBLY / LOW LEVEL SW & device drivers

Proficiency with RTCA/DO-178B development and verification; expert-level fluency in ANSI C and assembly, expertise with low-level software including device drivers, interrupt service routines, etc.

Job Description

Roles and Responsibilities
Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.).


Qualifications and Education Requirements

· Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.
· Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience.
· Has thorough knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies.
· Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.
· Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.
· Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.
· Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.
 
Job Number: JK-5493
Job Location: Irvine, CA
Rate: 60/hr max
Per Diem: no
Duration: 6 months
Input Date: 05/14/2018
Last Updated: 06/04/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Quality - 3 with active secret CA

Description:
1639
Engineer Quality - 3 (Job Number: 18005160)

Number of Openings: 1

Location(s): United States-California-Sunnyvale


Shift: 2nd Shift

Target Start Date: Jun 4, 2018

Target End Date: May 31, 2019

Rate: $55.00/hr.

Location: Sunnyvale, CA

Work Week: 5/40

Duration: 1 year

Clearance: Active Secret clearance required to start


Develops, modifies, applies and maintains quality evaluation and control systems and protocols for processing materials into partially finished or finished materials product. Collaborates with engineering and manufacturing functions to ensure quality standards are in place. Devises and implements methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment. Designs and analyzes inspection and testing processes, mechanisms and equipment; conducts quality assurance tests; and performs statistical analysis to assess the cost of and determine the responsibility for, products or materials that do not meet required standards and specifications. Audits quality systems for deficiency identification and correction. Ensures that corrective measures meet acceptable reliability standards and that documentation is compliant with requirements. May specialize in the areas of design, incoming material, production control, product evaluation and reliability, inventory control and/or research and development as they apply to product or process quality. May be certified in lean and six-sigma quality engineering methodologies.


Basic Qualifications:

5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.


Preferred Qualifications:

Hands-on experience in the assembly, integration, and test of satellite payloads and space vehicles. Knowledge of blue-prints, work instructions, electrical testing, safety, metrics, creating and dispositioning (MRB) discrepancy reports and associated paperwork. Strong floor presence, knowledge of effective pre-task instructions, procedure reviews and approvals, audits of high-bay and other highbay areas.
 
Job Number: MB-1639
Job Location: Sunnyvale, CA
Rate: 55/hr max
Per Diem: no
Duration: 1 year
Start Date: Shift: 2nd Shift
Input Date: 06/12/2018
Last Updated: 06/29/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Contractor - Interiors Design

Description:
Mechanical Engineer required for Completions Design / Aircraft Cabin Interiors. -Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues. -Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
 
Job Number: 18-130761
Job Location: Southeast
Rate: Open
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 05/25/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software OR Systems Engineer

Description:
The initial training period for 6 months in Cedar Rapids, then work effort will be brought back to Enea Phoenix Engineering Office if this is more convenient for you. May also choose to stay onsite in Iowa.

FMS engineers (Systems and/or Software Engineers)
Job Requirements:

Significant Avionics FMS or Flight Controls software experience is required

Software experience that can also write Low and Higher Level Requirements and associated tests. Debugging software on target hardware to obtain root cause is also a plus
Undergraduate or Graduate degree in Computer Science, Computer Engineering, Electrical Engineering, or related scientific discipline

Working knowledge of high-order programming languages (C, Ada, C++, Matlab/Simulink, etc.)

Demonstrated teamwork and leadership abilities

Strong communication and presentation skills

Strong object-oriented language (C++, C#, Python, etc.) and software development methodologies (Waterfall, Agile, etc.)

Strong background with GUI a plus!

Embedded software experience is required

Knowledge of DO-178 Development Standards

Enea does not have the ability to sponsor applicants for work visas for this position.
 
Job Number: 398
Job Location: Cedar Rapids, IA
Rate: 55.00
Per Diem: YES
Overtime: YES
Duration: 1 YEAR +
Start Date: August 30
Input Date: 07/26/2018
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walt Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design Engineer

Description:
Position Description

Seeking a lead Electrical Hardware Design Engineer. The individual selected for this position will be a proven leader with diverse technical capabilities and demonstrated “hands-on” electrical engineering expertise. The individual will contribute to the design, development, integration/test, and production of dynamic IR based electro-optic military systems. The engineer will work with a multi-discipline team to develop complex products including lasers, receivers, sensors, as well as multi-axis beam directors. The individual must be a self-starter with development experience working with integrated military avionics/electronic hardware and supporting test equipment. The selected candidate will be expected to lead electrical/hardware engineering teams through all phases of the product life cycle from conceptual development and detail design through qualification, manufacturing transition and production support. The engineer will be responsible for developing robust hardware architectures and solutions to meet demanding customer requirements, and will leverage their electrical engineering expertise to lead and/or perform circuit and CCA design and analysis, FPGA/CPLD designs/developments (Xilinx, Lattice), technical trade studies, analog/digital/mixed signal interface design, reverse engineering of legacy designs, component selection, evaluation of technology insertion/upgrades, as well as laboratory test and troubleshooting. Day to day, activities may range from planning work products and managing subcontract developments to supporting product builds & integration efforts. With a product focus, the individual is also expected to actively partner with operations personnel to develop solutions that adhere to UPC, DFT, and DFM requirements. Additionally, the engineer will support resolution of technical issues that are discovered during manufacture and test of deliverable hardware. This will include evaluating and troubleshooting LRU and circuit card level issues, assess test faults for root cause, identify disposition/corrective actions, and evaluate test equipment performance and integrity. The ideal candidate will thrive in a learning environment that encourages leadership and technical growth.



Skills Required

Established digital hardware architect for complex military/avionic equipment
Solid fundamentals of digital/analog/mixed signal electronics and interface/communication standards
Working experience with lasers, receivers, sensors/cameras, and/or related IR technologies
Understanding of complex electronics manufacturing and test methodologies
Experience with state-of-the-art electrical engineering development tools
Demonstrated leadership capabilities in team environment with strong written and verbal communication skills
Motivated self-starter and problem solver with proven experience in leading and supporting diverse multi-disciplinary teams


Skills Preferred

Current “hands-on” experience with Cadence electrical engineering development tools
Experience with XILINX & Lattice FPGA developments and toolsets.
Familiarity with JTAG protocol
Control account management experience
MATLAB/Simulink tool experience
Familiarity with image and signal processing algorithms
Life cycle engineering support related to diminishing manufacturing sources and material shortages (DMSMS)


Experience Required

5+ years of experience with laser, IR, and other detection and imaging technologies The selected electrical engineer is expected to have applicable experience in the following areas:
10+ years of demonstrated experience in Product development and support of DoD military electronics/avionics equipment
Design and development of IR technology hardware and systems (lasers, detection/imaging sensors, etc.)
Design and development of motion systems including motors, encoders, controllers, laser diode drivers, airborne power systems
Design of digital hardware architectures that leverage embedded processors, microcontrollers, and VHDL based FPGAs that provide capability and functionality to a larger system
Digital, Analog and Mixed Signal design and troubleshooting with an excellent working knowledge of common electronic circuits and components
Demonstrated experience in Product/Factory Support of DoD military electronics/avionics equipment
State-of-the-art electrical engineering design tools
Design and manufacturing standards associated with complex multilayer CCAs
Strong “hands-on” laboratory experience with instrumentation, equipment, and processes
Working experience with Interface standards including military/avionics communication buses (i.e. RS-485, Mil-Std-1553B, Ethernet)
Technical leadership of electrical / hardware teams in executing engineering development efforts


Education Required

Bachelor's degree in Electrical Engineering with 12+ years of experience OR a Master’s Degree and 10+ years of experience
 
Job Number: 41859
Job Location: Nashua, NH
Per Diem: Yes
Duration: 12 Months
Start Date: ASAP
Input Date: 06/14/2018
Firm Name: PANTHER GROUP
Attention: John Sabbagh
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Engineer

Description:
HGS Electrical Engineering is responsible for all electrical engineering tasks related to the design, analysis, test and certification of aerospace head-up display and guidance products, both in the commercial and military fields. This position requires a background in FPGA design and verification. This position requires responsibility for all aspects of the FPGA design and verification beginning with requirements definition up and through the introduction of the design into manufacturing. Support of projects includes schedule preparation and reporting of status on assigned tasks as well as interaction with team members from other disciplines. This position will work with little or no supervision.

Principal Duties and Responsibilities:
- Design FPGAs for commercial and military Head Up & Helmet Mounted Displays per DO-254
- Define requirements for a new design and develop requirements specification
- Perform preliminary design-including block diagram, trade off studies and design reviews
- Perform detailed design-including implemenation, design analysis, and design reviews
- Support board level FPGA integration
- Perform functional tests and design verification tests
- Present FPGA for FAA SOI Audits
- Oversee efforts and train less experienced FPGA designers
- Define Production Test Requirements
 
Job Number: 1
Job Location: Portland, ORE
Per Diem: Split
Overtime: YES
Duration: 2 years
Start Date: ASAP
Input Date: 05/08/2018
Firm Name: TECHNICAL RESOURCES UNLIMITED INC
Attention: Joe Caron
Address: 210 BROADWAY STE 106
City, State: LYNNFIELD, MA 01940
Phone: 781/595-8200
800 Phone: 855/878-8200
Fax Phone: 781/598-2240
Website: www.truinc1.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Maintenance Technicians - Nashville, TN

Description:
STS AeroStaff Services is hiring Facilities Maintenance Technicians in Nashville, Tennessee.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Qualifications:

• Must have experience with one or more of the following: Plumbing, Electrical, and/or HVAC

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41621
Job Location: Nashville, TN
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 05/07/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
GROUND TEST AND AIRCRAFT INSTRUMENTATION TECHNICIAN

Description:
Ground Test and Aircraft Instrumentation Technician

15+ Months Contract Opportunity

Stratford, CT

Work from Engineering Requests, Procedures and Drawings with limited guidance; to Fabricate, Install, Check-out, Diagnose, and Trouble-Shoot Instrumentation Data Acquisition Systems/Sensors in support of Ground and Flight Test Programs.

Requires planning, building and terminating the various cable harnesses required in the Instrumentation System.
Assist in performing System and sensor calibrations.
Working environment consist of the Structural Test Lab, Remote Test Stands ( Engineering & Quality Assurance ) as well as Offsite support to include Aircraft Instrumentation .
Requires a good working knowledge of Instrumentation Sensors, slip rings, and data acquisition systems.

Must possess a strong Mechanical and Electrical background and familiarity with Strain Gages and their circuitry, linear displacement and vibration transducers, measurement systems, instrumentation wiring and documentation.
Ability to perform strain gage installations preferred.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
 
Job Number: 365889
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 05/10/2018
Last Updated: 05/21/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
HVAC Technician

Description:
The HVAC Technician’s primary function is to maintain, install, troubleshoot and repair all types of building equipment and HVAC / Electrical Systems to the customers' satisfaction. Assists other mechanics and technicians occasionally in aspects of building maintenance. Confer with customers to ensure completion of all tasks in a satisfactory manner.

Responsibilities:

> Maintain, install, and troubleshoot electrical equipment and HVAC systems.
> Perform general building and office repairs and office relocation tasks.
> Read and interpret blueprints and building drawings.
> Collect data on various types of equipment.
> Conduct periodic building walk-through to locate problems; perform minor carpentry, drywall and painting.
> Practice good housekeeping and safety standards & Total Quality principles and concepts.

Qualifications:

> 3+ years related experience with a high school diploma and/or related technical education and training.
> Chlorofluorocarbon (CFC) Certification is required
> Ability to troubleshoot and repair electrical systems AND HVAC systems.
> Ability to make general mechanical repairs.
> Good verbal and written communication skills.
> Ability to maintain a valid driver's license.
> Knowledge of HVAC principles and National Electrical Codes (NEC).

Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Office: 508.230.5030 x123
 
Job Number: 018_2018
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 12+/- Months
Start Date: ASAP
Input Date: 09/05/2018
Last Updated: 10/16/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Harness Installation Designers - Many Needed

Description:
* Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches.
* Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements.
* Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design.
* Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.
* 2D Drawing Design Preferred
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

Email resumes to: mmccarthy@pdstech.com
 
Job Number: Harness - Gulf
Job Location: Savannah, GA
Rate: $58.00-$63.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 05/10/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Harness Installation Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
- Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
- Aerospace experience is required.
- Knowledge of Catia V5 is required.
- Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches.
- Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements.
- Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design.
- Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.
- 2D Drawing Design Preferred

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8857
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/27/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Sean O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Inspector

Description:
Notes from the Hiring Manager:

<> The Inspector should have experience inspecting cables and mechanical parts within a manufacturing environment , preferably with a mechanical background instead of electrical
<> They will receive multiple parts, which will be a mixture of cables and mechanical parts but vary from day-to-day; they should be able to see the part and know how to proceed with inspection, or at least be able to read the engineering drawings.
<> Experience with inspection tools such as Calipers, Measuring Devices / Equipment, Tape Measure, Feeler Gauge, etc
<> IPC 610 or 620 Certification is a plus


Summary:

To perform checks, tests, gauging, and instrument inspections of materials, goods in process, and finished goods.

Job Description:

> Performs audits, tests & inspections of materials, goods in process or finished goods within value stream (receiving through final system assembly) assuring quality first by determining compliance to drawings, procedures & specifications
> Applies established inspection procedures & uses simple inspection/testing tools and instruments of a “go/no go” nature.
> Develops and/or uses test and inspection set-ups utilizing mechanical and/or electrical test measurement equipment.
> Inspection methods and limits require good judgment and interpretation.
> Requires interpretation of inspection plans, tests and procedures.
> Recommends changes to procedures, processes, and drawings to improve efficiency and/or quality of the product.
> Identifies and documents nonconforming material in accordance with applicable procedures.
> Assists and trains others in assuring the proper test, measurement, and procedural operations.
> Ensure adherences to policies and procedures accordingly.
> Practices Total Quality principles and concepts.
> Acquire IPC-610/STD 001 and IPC-620 Certifications as applicable

Qualifications:

> 1-2 years related experience with a High School diploma preferred
> Knowledge of manufacturing and quality assurance processes and/or procedures.
> Knowledge of military and commercial quality specifications.
> Knowledge of Statistical Process Control.
> Knowledge of digital and analog circuitry.
> Knowledge of electrical and/or mechanical inspection.
> Knowledge of workmanship standards.
> Knowledge of packaging and preservation requirements.
> Understanding of Total Quality principles and concepts.
> Ability to communicate effectively verbally and in writing.
> Ability to use electrical and mechanical inspection equipment.
> Ability to develop and use simple to complex inspection set-ups.
> Basic algebraic skills.
> Ability to read, analyze and interpret detailed specifications, drawings, procedures, and schematics.
> Ability to work effectively within a team environment
 
Job Number: 024_2018
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 12+/- Months
Start Date: ASAP
Input Date: 04/02/2018
Last Updated: 05/29/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Mechanical Design Engineer

Description:
Interior Mechanical Design Engineer

Location: Savannah, GA
Pay Rate: $50.40/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
-Mechanical Engineer required for Completions Design / Aircraft Cabin Interiors.
-Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
-Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
-Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
-Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
-Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues.
-Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items. Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.

Education and Experience Requirements:
Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job. 18 months of related Engineering experience. Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.

Position Purpose:
Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Company
aircraft.

Principle Duties and Responsibilities/Essential Functions:
1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements
Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise
Perform other duties as assigned.

Other Requirements:
1. The level of technical skills and abilities appropriate for this grade will be established by each discipline.
2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.
3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources.
4. Ability to convey technical concepts in both written and verbal formats.
5. Contacts are primarily within the organization, with occasional customer contacts on routine issues.
6. Works under general supervision for routine tasks of minor complexity.
7. With supervision/mentorship, can coordinate the activities for lower level engineering staff.

Send your resume to rex@inconen.com if qualified
 
Job Number: 8795
Job Location: Savannah, GA
Rate: 50.40
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/21/2018
Last Updated: 05/23/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Software Engineer - contract work - AZ

Description:
Developing
(1) network client/server software
(2) Distributed Systems
(3) TCP / UDP communication protocol.]
The position requires someone who’s actually done software development focused in the areas that are captured above.
C++ development.
Should be familiar w/ UML.
-Knowledge of WindRiver Simics or Perl will be considered a plus.

Role/Duties:
Design, develop and test spacecraft simulation software.
Debug and diagnose software in a lab environment.
Coordinate with engineering peers of other disciplines to develop software models of hardware components, support software integration activities and resolve interface issues.
The candidate must work in a team setting but should be able to independently and efficiently manage their time to complete assignments in a dynamic, schedule-driven environment.
 
Job Number: 205878
Job Location: AZ
Rate: 50-75 / hr
Per Diem: YES
Overtime: Possible
Duration: 12 months
Start Date: 2/3 weeks
Input Date: 05/29/2018
Last Updated: 12/13/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Verification Engineer (Medical Device--802.11)

Description:
Principal Engineer, Verification / Testing Lead

The Principal Engineer will lead a team of verification engineers in planning, developing, executing, and documenting software and hardware verification of the Communication Engine (CE). The CE supports the wireless communication technologies (WLAN 802.11) which are integrated into the general infusion pump.

You will drive test strategy across distributed teams in a highly regulated healthcare environment. You will also strive to enable automated test solutions that will support 24/7 continuous integration testing.

Essential Duties & Responsibilities

Plan and organize testing activities around project needs and timelines
Provide technical leadership in developing test automation for the communications engine of a general infusion pump
Develop test strategies using industry best practices to effectively test the software and hardware of the communications engine
Act as subject matter expert in reporting status to V&V and site management detailing issues, risks, mitigations, and results
Work on special projects as they arise
Knowledge, Skills & Qualifications

Demonstrated ability to manage small teams in planning and organizing formal test activities
Excellent documentation and communication skills
Knowledge of configuring, analyzing, and testing wireless connectivity software (802.11 a/b/g/n)
Experience (4+ years) in using scripting languages (Ruby preferred) in automated testing solutions
Familiarity with best practices in Verification/Validation in a highly regulated environment
Android experience preferred
Education and Experience

Bachelor’s degree in Computer Science, Electrical Engineering, or similar discipline from an accredited college or university and 6+ years of experience
An equivalent combination of education and relevant experience can substitute
 
Job Number: 573
Job Location: Poway, CA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: May 15, 2018
Input Date: 05/02/2018
Last Updated: 05/18/2018
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walt Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

MP&P Engineer 3 - CA

Description:
Chipton-Ross is seeking a MP&P Engineer 3 located in Huntington Beach, CA

RESPONSIBILITIES:
Parts Manager/Components Engineer - Manage the electrical, electronic, and electro-mechanical (EEE) parts and components including subcontractor oversight of EEE parts and components for the PAC-3 Program. Position requires a strong track record in communication with program management, customers, and subcontractors outside of Client. The position also requires controlling PMP product specifications, subcontractors parts management control plans, and DMSMS part management plans, lead teams in assessing applications, qualifications, evaluate/approve replacement EEE parts and components including qualification of plastic encapsulated microcircuits (PEMs), technology insertion, life cycle cost and parts obsolescence assessments/solutions, developing non-standard parts approval requests (NSPARS) for new part additions and assessing derating exceptions. The parts manager will have authority regarding all technical PMP dispositions. The parts manager is expected to integrate technical, value, safety, and HAZ-MAT considerations of EEE parts and components into product definition to comply with Client, customer, and government requirements. The parts manager will be the prime interface with the customer on parts, materials and process concerns and lead initiatives to improve/develop PMP control processes in the absence of existing procedures for the PAC-3 Program as well as for the Client enterprise PM&P Engineering Function. The parts manager will support with the PAC-3 PMPCB Chairman and work with parts managers/component engineers as well as other members of the PAC-3 Program team to define/implement engineering solutions to meet organization objectives. The parts manager will also work with the PAC-3 reliability, quality, configuration management, and logistics team to implement the PAC-3 Program PMP practices across the program in a cost efficient manner while maintaining contractual standards.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

WORK HOURS:
Full-Time/First Shift
8 AM - 4 PM

MISCELANEOUS:
Travel Required-Travel to EEE Part manufacturer's local and domestic travel on occasion.

 
Job Number: 168068
Job Location: Huntington Beach, CA
Rate: $DOE
Duration: 6 MONTHS
Input Date: 01/22/2018
Last Updated: 12/13/2018
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

Maintenance Mechanic - Level 1 - FL

Description:
Chipton-Ross is seeking a Maintenance Mechanic for an opening in Pinellas Park, FL.

RESPONSIBILITIES
Typical minimums: High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data.
Competently uses computers and other systems to access, maintain and manipulate data.
Interpersonal skills and the ability to interface with all levels, to work in teams or independently and communicate effectively with all co-workers or supervisory staff.
" Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
" Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
" Light janitorial duties expected.
" May perform routine inspections to determine repair and maintenance work necessary.

REQUIREMENTS
" Basic equipment/machines repair (NOT PARTS) and troubleshooting skills, for both electrical and hydraulic systems.
" Carpentry and plumbing experience required.
" Strong troubleshooting/diagnostic skills; proficient with multi-meter
" Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
" Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
" Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
" Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
" Commercial plumbing repairs
" Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)

SHIFT
1st Shift: 6:30am to 5:00pm
4/10 work schedule
 
Job Number: 166611
Job Location: Pinellas Park, FL
Rate: $16 to $22.00 DOE
Duration: 12 Months
Input Date: 03/11/2018
Last Updated: 12/13/2018
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Manufacturing Engineer 3
(U.S. Citizenship Required*)
Berkeley, MO
2018-5990

Responsibilities:
• Develop and implement production and tooling methodologies.
• Participate on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines.
• Develop, identify, and implement conceptual designs and maintain the program architecture for build.
• Lead and implement manufacturing plans.
• Conduct producibility & variation analyses to ensure that manufacturing process capability matches requirements.
• Assist providing producibility information for inclusion in project plans and help document producibility best practices.
• Analyze design/build concepts to evaluate producible design/build definitions.
• Resolve technical problems of significant impact to performance, cost or schedule.
• Coordinate & implement new engineering principles, theories, advanced technologies and concepts.
• Validate & ensure production readiness of solutions to complex problems.
• Implement lean principles and technologies.
• Drive part demand, procurement orders, and issue fabrication orders (with internal & external suppliers).
• Effort includes mechanical and electrical manufacturing.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5990
Job Location: Berkeley, MO
Rate: Based on experience
Duration: 6 Months
Input Date: 05/14/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Theo Hawthorne
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Manufacturing Planner 3
(U.S. Citizenship Required*)
Renton, WA
2018-6006

Responsibilities:
• Develop, implement, and maintain various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
• Develop manufacturing concepts and strategies to support business objectives.
• Develop and integrate suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
• Review & approve supplier data to ensure manufacturing related requirements are met.
• Develop tooling requirements based on manufacturing and engineering requirements.
• Manage tools from initial design to end of use disposition.
• Investigate and resolve manufacturing related issues.
• Perform producibility assessments for part or product designs.
• Provide producibility input to design, manufacturing processes and manufacturing technologies to meet cost and schedules.
• Develop integrated work statements and sequencing of events to support delivery commitments.
• Draft, update and review processes and procedures to support business and regulatory agency requirements.
• Work under general direction.

Qualification:
• Electrical planning experience required. 737 electrical planning experience preferred.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6006
Job Location: Renton, WA
Rate: Based on experience
Duration: 6 Months
Input Date: 05/25/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Andrea Moseley
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner III & IV - Electrical/Electronics - (WA)

Description:
SEVERAL OPENINGS IN THE EVERETT & RENTON, WA AREAS.

Manufacturing Planners with Electrical/Electronics experience.

- Develop, implement and maintain various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
- Assist with development and integration of suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
- Assist in reviewing supplier data to ensure manufacturing related requirements are met.
- Identifies tooling requirements and initiates tooling orders based on manufacturing and engineering requirements.
- Assist in tooling dispositions.
- Investigate and resolve manufacturing related issues of limited scope.
- Assist with producibility assessments for part or product designs.
- Assist in providing input to design, manufacturing processes and manufacturing technologies to meet cost and schedules.
- Develop work statements and sequencing of events to support delivery commitments.
- Assist in the review, maintenance and monitoring of internal documents.
- Provide ship side support, research and shop assistance

Preferred Qualifications:

- Basic understanding of wiring and wire routing
- - Experience with wire bundle fabrication concepts, wire installation, electrical equipment installation and installation of wiring provisions.
Experience in Teamcenter
- Experience using Manufacturing Execution Systems (CMES)
- WIRS: Wires Information Release System
- CAPP II

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: MPEEwa
Job Location: Renton & Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 05/16/2018
Last Updated: 06/15/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner III - Structures/Composites/Electrical (WA)

Description:
**HOT** SEVERAL OPENINGS IN RENTON, AUBURN, & EVERETT, WA.

Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops manufacturing concepts and strategies to support business objectives. Develops and integrates suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Reviews and approves supplier data to ensure manufacturing related requirements are met. Develops tooling requirements based on manufacturing and engineering requirements. Manages tools from initial design to end of use disposition. Investigates and resolves manufacturing related issues. Performs producibility assessments for part or product designs. Provides producibility input to design, manufacturing processes and manufacturing technologies to meet cost and schedules. Develops integrated work statements and sequencing of events to support delivery commitments. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements.

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: MFGPWA
Job Location: Renton & Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 10+ Months
Start Date: ASAP
Input Date: 05/09/2018
Last Updated: 07/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Research Engineer

Description:
Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.


Seeking an electronic/photonic/manufacturing device engineer or research scientist to provide support to a program focusing on printing techniques for electronic and photonic device fabrication. The selected candidate will use additive manufacturing and conventional cleanroom processing techniques to fabricate and design electronic and RF components for a variety of applications such as basic electronic controls, RF antennas, photonics, etc. Additive manufacturing refers to inkjet printing, aerosol jet printing, extrusion printing (such as Nscrypt), and 3D printing such as polyjet or thermoplastics; conventional cleanroom processing techniques refers to photolithography for electronic device fabrication and its associated characterization. Expertise is not expected in all of these areas, but some familiarity is needed. The selected candidate will complete research tasks with minimum oversight and deliver completed prototypes, produce reports, and process documentation. Duties will include designing experiments to characterize printer performance, identifying appropriate materials to deposit either purchased commercially or manufactured in-house, and some device design and characterization of manufactured devices. Additional responsibilities will include 1) designing and fabricating photonic and electronic devices, 2) becoming an expert at running and maintaining both the aerosol jet and ink jet printers, 3) specifying additional materials and equipment to purchase to support research, 4) contributing to reports and presentations of technical progress, and 5) authoring scientific papers and attending conferences. Education/Experience: The selected candidate must have a PhD in electrical engineering, materials engineering, mechanical engineering, physics, optics or related field with three years of experience. Knowledge, Skills and Abilities: This position will require basic knowledge of CAD or AutoCAD and software design. Familiarity with materials and device characterization is required: electrical, RF, optical, mechanical. Familiarity with RF modeling software (such as Comsol) is desired. Applicant selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.
 
Job Number: KM0011
Job Location: Dayton, OH
Input Date: 04/27/2018
Last Updated: 05/18/2018
Firm Name: MIDCOM CORPORATION
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
Model and calculate mass properties data to support all phases of project development. Translate customer requirements into mass models for development of mission profiles. Analyze mission configurations using 2D drawings and 3D CAD. Generate mass properties distributions for modifications and input to structural loads models. Lead weight reduction tasks.
Articulate mass properties requirements, risks, opportunities, and status at formal design reviews.
Perform weight and balance measurements of components and final products. Coordinate mass properties requirements with multi-disciplinary teams including maintenance, production, logistics support, flight test, flight operations and other disciplines.

Familiarity with SAWE and American Institute for Aeronautics and Astronautics (AIAA) Recommended Practices and Standards, Automated Weight and Balance System (AWBS) and FAA airworthiness regulations.
Knowledge and experience in aircraft operations, familiarity with Microsoft Office, and 3D CAD/CAM tools (CATIA preferred)
Familiarity with aerospace system design and integration, manufacture, and maintainability, including familiarity with best practices in mechanical, electrical, and systems design.
Requires a BS in Related Field.

Update Mass Properties Databases.
-Assist and perform mass property trade studies as necessary.
-Suggest and track weight improvement ideas.
-Assist in Mass Properties measurements from a detail up to a vehicle level.
-Other Mass Properties tasks as needed.

The position will be working detail design on a new composite vehicle. They will primarily be reviewing drawings and incorporating them into our database in support of weight tracking, loads, stress and flutter; working trade studies to support configuration decisions; and tracking and suggesting weight savings ideas to support the program requirements.

The Structures Company is an AA/EOE.
 
Job Number: 104
Job Location: Mojave, CA
Rate: $75/hr. DOE
Per Diem: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 08/01/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
PRIMARY RESPONSIBILITIES INCLUDE:
Provide mass properties engineering in accordance with industry standards and Society of Allied Weight Engineers (SAWE) best practices. Analyze mass properties impacts of internal and external modifications, and impacts to systems and subsystems. Analyze and account for changes in mass properties throughout program lifecycle.
Model and calculate mass properties data to support all phases of project development. Translate customer requirements into mass models for development of mission profiles. Analyze mission configurations using 2D drawings and 3D CAD. Generate mass properties distributions for modifications and integrate with OEM data for input to structural loads models. Manage subcontractor efforts related to mass properties including vendor weight control. Lead weight reduction tasks.
Articulate mass properties requirements, risks, opportunities, and status at formal design reviews to both internal and external customers.
Generate FAA and DoD mass properties documentation meeting requirements of airworthiness certification including weight and balance manuals, supplements, and equipment lists.
Perform weight and balance measurements of components and final products. Coordinate mass properties requirements with multi-disciplinary teams including maintenance, production, logistics support, flight test, flight operations and other disciplines.

EDUCATION, EXPERIENCE AND SKILLS REQUIRED:
Requires a BS in Related Field.

Sr. Mass Properties Engineer with 10+ Years of experience
Familiarity with SAWE and American Institute for Aeronautics and Astronautics (AIAA) Recommended Practices and Standards, Automated Weight and Balance System (AWBS) and FAA airworthiness regulations.
Knowledge and experience in aircraft operations, familiarity with Microsoft Office, and 3D CAD/CAM tools (Solidworks preferred)
Familiarity with aerospace system design and integration, manufacture, and maintainability, including familiarity with best practices in mechanical, electrical, and systems design.
Must be a problem solver capable of working alone or with a technical team in a fast paced environment.

Note: Ability to obtain/maintain a security clearance may is required.

The Structures Company is an AA/EOE.
 
Job Number: 196
Job Location: CO
Rate: $55-$63/Hr., DOE
Per Diem: Yes
Overtime: Yes
Duration: 6+ Months
Start Date: May 2018
Input Date: 05/24/2018
Last Updated: 08/01/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Mechanic

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610060095
Job Location: KS City, MO
Duration: 12 months
Input Date: 01/25/2017
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002FtZOAA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer III

Description:
Mechanical Engineer III (Senior Engineer) needed for a contract opportunity with Yoh’s client located in Gloucester, MA

The Big Picture – Top Skills You Should Possess:
• MUST HAVE CURRENT PRO/ENGINEER CREO EXPERIENCE TO APPLY.
• BSME or equivalent with a minimum of 7 years related experience.
• Experience in 3D Computer-Aided Design using Pro/Engineer Creo, PDM Link
• Finite Element Modeling/Analysis tools (ANSYS, Auto Desk, Pro/Mechanica, MathCad, etc.)
• Strong theoretical background in mechanical engineering disciplines – structural, heat transfer, mechanism design, fluid systems, and system-level integration
• Professional or laboratory “Hands-on” experience in a product manufacturing environment
• Knowledge of test and verification techniques; including data analysis
• Ability to work with limited supervision and work within diverse, cross functional development teams
• Experience in designing complex systems/subsystems in any of the following fields is a plus: large capital equipment/industrial machine design, defense, aerospace, semiconductor equipment, and/or sophisticated medical equipment.

What You’ll Be Doing:
• You will be designing, implementing, and verifying complex mechanical subsystems in large scale capital equipment.
• Projects will include New Product Development and Continuous Improvement, and will be a team approach with Electrical, Software, and other Mechanical Engineers.
• The successful candidate will enjoy a fast paced environment filled with technical challenges.
• Execution of all project phases from conceptual designs through detailed design, prototype part procurement, development test, reliability test, and release to manufacturing.
• Delivery of technical presentations
• System level design to integrate multiple subassemblies into major machine level assemblies.
• Lead a subsystem design effort including specifications, design, and analysis
• Design of mechanical parts (vacuum chambers, frames and support structures, motor controlled mechanisms, etc) and assemblies using 3D CAD.
• Analysis (GDT, structural, heat transfer, etc) of mechanical parts and assemblies.
• Documentation of mechanical parts and assemblies for release into medium volume production systems.
• Evaluation of designs for cost and manufacturability performance

What You Must Bring to the Table:

• MUST HAVE CURRENT PRO/ENGINEER CREO EXPERIENCE TO APPLY.
• BSME or equivalent with a minimum of 7 years related experience.
• Experience in 3D Computer-Aided Design using Pro/Engineer Creo, PDM Link
• Finite Element Modeling/Analysis tools (ANSYS, Auto Desk, Pro/Mechanica, MathCad, etc.)
• Strong theoretical background in mechanical engineering disciplines – structural, heat transfer, mechanism design, fluid systems, and system-level integration
• Professional or laboratory “Hands-on” experience in a product manufacturing environment
• Knowledge of test and verification techniques; including data analysis
• Ability to work with limited supervision and work within diverse, cross functional development teams
• Experience in designing complex systems/subsystems in any of the following fields is a plus: large capital equipment/industrial machine design, defense, aerospace, semiconductor equipment, and/or sophisticated medical equipment.


What are you waiting for? Apply Now!
Recruiter: Patty Shofner
Phone Number: 636-275-1221
Yoh makes finding and applying for jobs simple. Partner with Yoh to find the right opportunities across multiple industries in the US and UK. Find out more here!
Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer, M/F/D/V. Click here to contact us if you are an individual with a disability and require accommodation in the application process.
 
Job Location: Gloucester, MA
Input Date: 05/09/2018
Firm Name: YOH SERVICES
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer SECRET CLEARANCE needed UTAH

Description:
Job description:
Experience in the use of ANY 3-D CAD system (NX Preferred)
Aerospace assembly and component installation experience e
Structural and non-structural bonding experience
Support assembly and installation of composite and metallic components into larger aerospace assemblies. Work closely with operations personnel to develop manufacturing solutions and solve production issues component and sub assembly installation, line drilling, power feed drilling, fastened assembly of composite and metallic structures, structural and non-structural bonding, hydraulic component installation, electrical component installation, and functional test of electrical and hydraulic systems. Learn and understand requirements to determine product impacts and recommend disposition of the parts. Work in a cross functional team to develop and implement process improvements.
Requirements & Qualifications:
•Active Secret DoD Clearance needed
 
Job Number: 2985
Job Location: promontory, UT
Rate: 60-100/ hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months
Start Date: 2/3 weeks
Input Date: 04/13/2018
Last Updated: 10/04/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems DER

Description:
Dept. 660 Mechanical Systems DER

Position Purpose:
Responsible for the design, research and development of advanced new applications resulting in new product/business for the company.

Unique Skills:
• DER for Cockpit Arrangements and Cabin Arrangements
• Mechanical Chart of Authority should mention Cockpit Arrangements
• Electrical Chart of Authority should mention mechanical aspects for electrical installations
• Authority required on Part 25 Chart C1 : A1, A2, A7, D1, D2, D7, E1, E2, E7, K1, K2, K7, N1, N2 and N7
• Authority required on Part 25 Chart C2 : I1, I2, I4, L1, L2, and L4

Education and Experience Requirements:
• Bachelor's Degree in engineering, a related curriculum required or equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job.
• Fifteen (15)+ years progressively responsible engineering exp in specific tech discipline with Bachelors. Exp credit considered for related adv degrees limited to 2 yrs Masters, 4 yrs PhD in fields applicable to this job.
• Requires approval of Eng PRB incl bus justification.

Essential Functions:
• Plans R&D programs and recommends technological application programs to meet corporate objectives
• Proactively promotes process initiatives that improve the balance of technical product, cost and schedule
• Applies cutting edge theories and technologies by exhibiting an exceptional degree of ingenuity, creativity and resourcefulness
• Champions and develops innovative principles and ideas
• Often acts independently and exercises wide latitude in determining objectives and approaches to critical assignments
• As a recognized expert in the field, provides consultative services to senior/executive leaders both within the company and the industry
• Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-226
Job Location: Savannah, GA
Rate: $135.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Naval Systems Engineer

Description:
• We’re looking for someone to join the unmanned surface vessel team who has knowledge of naval architecture and engineering, which includes an understanding of the design and operation of shipboard systems. Ideally, the candidate will be able to provide feedback across multiple programs, and may be able to consult on things like craft design.. .controls… automation.. etc. They will help support the full lifecycle of engineering programs.
• Some key resume words the managers will be looking for: navy, naval design, marine design, naval architecture, naval control systems, autopilot, automation
• This position is for an individual contributor (won’t be managing people below him/her) that can offer their expertise to help consult on things like craft design/controls/automation within our various programs. Ideally looking for a Systems Engineer that understands…
o How to control boat/crafts
o The ‘naval architecture’ side (i.e. boat engines… propeller design… how to select the proper engine/propeller set based on the craft)
• Must have 5 or more years of experience
• Willing to travel up to 25% of the time for on the water performance testing (within the US)
• Must have a minimum of a Bachelors degree (masters degree preferred)  Targeting degrees in: Mechanical, Electrical, Software, or Systems Engineering, Marine or Naval Engineering
• Must be a US Citizen with ability to obtain security clearance (active clearance preferred)

Direct or contract to direct

 
Job Number: Naval
Job Location: Hunt Valley, MD
Rate: open
Per Diem: yes
Overtime: possible
Duration: L
Start Date: ASAP
Input Date: 05/08/2018
Firm Name: TECHNICAL RESOURCES UNLIMITED INC
Attention: Barbara Nuzzolo
Address: 210 BROADWAY STE 106
City, State: LYNNFIELD, MA 01940
Phone: 781/595-8200
800 Phone: 855/878-8200
Fax Phone: 781/598-2240
Website: www.truinc1.com

THIS JOB IS NO LONGER AVAILABLE.