Job Search Results

575 listings were found that matched your search words: Keywords: Civil OR Industrial ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2017/09/23 Saturday 06:12PM Pacific Time by ContractJobHunter. )

Listings 1 - 575

Go To My Job Tracker

Expand all descriptions

2128 - STRESS ENGINEER - resume - cv. word doc only

Description:
Preliminary and detailed sizings.

Stress analyses to ensure requirements (strength, fatigue, damage tolerance, weights, customers) are met.

Validation of engineering drawings and IPDT support.

Preparation of certification reports and support to entry-into-service.


University mechanical or civil or aerospace engineering degree with a minimum of 5 years relevant experience. Your experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Knowledge of CATIA, finite element modeling and analysis is an asset. General computer skills are essential.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Able to read and write in English and have good communication skills. Being completely bilingual (French and English) is an asset.

Excellent knowledge of aircraft structure and system installation technical requirements ( TCCA, FAA & EASA).

Must have Experience of working with new design and must be able to demonstrate understanding of aircraft component load path and functions.

Must have experience using Patran and Nastran.
 
Job Number: 2128
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 07/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2143 - METHODS AGENT - CABINET CONFIGURATION - Word doc. only

Description:
Define and produce work instructions for the fabrication and assembly destined for the manufacturing of cabinets.

Work in close collaboration with the Engineering, Production, Logistics and quality functions.

Investigate root causes and analyze potential solutions taking into account cost, impacts and risks of a production change.

Ensure production change feasibility.

Analyze the feasibility of customer requests (P&O, C&O) and program change requests (PCR).

Plan and implement changes in production (all change affecting the production method) and coordinate first unit in production.

Support daily production activities.

Identify non-value added activities, eliminate them and optimize production.

Establish the following requirements: ergonomics & health & safety, tools and production equipment according to optimal work methodology.

Participate in the development and maintenance of methods procedures.

Participate in continuous improvement through the achieving excellence system.

Technical college degree, university degree and/or equivalent experience.

Minimum of 8 years of experience in aerospace or other related manufacturing industry.

Experience in cabinet making, finishing or composite will be considered an asset.

Are functional in the French language, spoken and written.

Are able to read technical drawings and have good visualization skills in 3D.

Have good knowledge of MSOffice suite (Word, Excel, PowerPoint, Outlook).

Knowledge of aircraft structures, systems or interiors will be considered an asset.

Knowledge of SAP and CATIA V5 is required.

Are organized, a good planner and problem solver.

Have a good judgment, have a sense for innovation and possess a good decisional process.

Have good interpersonal communication skills and are customer oriented.

Have strong project management skills and function well within a multidisciplinary team
 
Job Number: 2143
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 05/23/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2146 - AVIONICS SYSTEM ENGINEER - resume word doc. only

Description:
Perform technical integration activities associated with all Client Avionic systems.

Generate requirements, analyze, review and approve system designs, oversee system integration, coordinate with various Integrated Product Teams/Suppliers, work with all departments for design validation and verification, testing and certification and provide support to certification authorities as required.

Review and approve the suppliers design through participation in the supplier's development, design, manufacture, integration, and verification process.

Assist in functional, integration, qualification, and ground/flight testing of all the Client avionics systems.

Perform ground and/or flight testing activities for Client avionics systems on dedicated specialist test rigs.

Develop testing procedures, perform test preparation and undertake test vehicle validation.

Participate in troubleshooting and develop/implement resolution plans when testing anomalies occur.

Be asked to work on various avionics systems including but not limited to: Auto-flight: Flight guidance, Auto-throttle, Autoland;
Flight Displays: EFIS, EICAS, HUD;
Flight Management Systems (FMS): Navigation, RNP etc.
FANS/LINK 2000
Communications including VHF, CPDLC, HF, SATCOM etc.
Digital Integration: Integrated Modular Avionics, Data-buses ARINC 429, AFDX, TTP etc).
CVR/FDR, Inertial Reference System and other Client secondary Avionics Systems.


University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent.

Must have 15 or more years of relevant aerospace systems experience.

Have a good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Have a good knowledge of RTCA documents DO-178 and DO-160.

Are familiar with part FAR25 / 525 certification process and with the ARP4754 standard.

Have an experience with civil aircraft in a production or maintenance environment (asset).

Have strong communication skills (written and spoken).

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc). Weekend, night and evening shift may be expected.

Occasional business trips to Wichita, KS may occur.
 
Job Number: 2146
Job Location: Mirabel, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 07/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2150 - CABINET DESIGNER - Word document only please.

Description:
Act as a specialist in a specific system / monument

Define technical specifications, mechanical/electrical interfaces, design, integrate, certify, test and troubleshoot the above described systems.

Organize and attend design reviews taking into consideration industry regulations, Bombardier Aerospace Design Practices and requirements.

Be in direct contact with suppliers and responsible for the delivery of quality engineering documentation that meets Bombardier Standards.

Research, design and evaluate new technical concepts or emerging technologies. (Trade Shows, Air Shows, technical exhibitions, etc).

Procure parts and supply instructions drawings to employees to build mock-ups/prototype.

Provide definition engineering in relation with new designs%u2026
Support the creation of Interface Control Drawings (ICD)
Report status, identify and mitigate roadblocks
Point of contact on a technical level for designers
Accountable for engineering deliverables and milestones for a group of monuments

Bachelor's degree in Mechanical Engineering with 5 to 8 year experience.

Knowledgeable in 3D design with CATIA V5

Organized and project oriented.

Good communication skills including good English and French are assets

Customer-oriented with innovative problem solving skills and you are organized.

Autonomous, flexible and oriented toward result via your project management skill.

Experience and have lead a small group of designers or equivalent.

Design experience in cabinet assembly design and/or cabinet installation

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc)
 
Job Number: 2150
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 8+ Mths
Start Date: ASAP
Input Date: 05/17/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2153 - DESIGN/STRESS SPECIALIST - Word document only please.

Description:
Work in a very dynamic integrated product development team (IPDT) involving all technical and production functions.

Put forward optimal solutions for major aircraft structures suitable for latest manufacturing technologies and processes.

Carry out technical feasibility studies, preliminary concepts, volume management for equipment, interfaces requirement, technical review.

Support to IPDT and Suppliers.

Work on Trade Studies, test plans, Installation and detail drawings.

Support experimental testing and entry into service.

University mechanical or civil or aerospace engineering degree.

Minimum of 15 years of relevant experience.

Must have experience in Primary and Secondary Aircraft Structures.

Must have experience with Mechanical systems and systems installations.

Experience in design and creation of MBD and 2D drawings of detail parts (machined parts, sheet metal), assemblies and installation drawings in CATIA V5.

Must have working knowledge of CATIA V5 (minimum 2000H experience).

Ability to understand complex engineering issues.

Basic knowledge required:
- 3D and MBD creation in CATIA V5
- GD&T and technical drawings
- Certification rules
- Manufacturing requirements

Must be computer literate and familiar with commonly used software (MS Office).

Experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Have the knowledge of CATIA, finite element modeling and analysis is an asset.

Have general computer skills - essential.

Are a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Read and write in English and have good communication skills.
Being bilingual (French and English), is an asset.
 
Job Number: 2153
Job Location: Montreal, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/31/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2154 - PROJ. ENGINEER - ELECTRICAL WIRING DESIGN - resume word doc only

Description:
Provide project management support for multiple projects dealing with changes to the basic aircraft, options and in-service issues.

Establish the project scope, define implementation strategies & risks and present business cases

Prepare & maintain schedules, cost control & progress reports

Support the Service for the delivery of engineering solutions (drawings, modsums, etc) and ensure functional groups meet their commitments until successful implementation.

Take meeting minutes and actions and insure a proper follow-up to reach goals and expectations

Contribute by participating to other tasks depending on program needs and demonstrating flexibility to adapt.

University degree in engineering and/or a related field and/or minimum of fifteen (15) years equivalent experience in the aerospace industry.

Proven experience in project management and/or project engineering.

Demonstrate superior organizational and leadership skills and feel comfortable in a dynamic and changing work environment.

A high level of communication skills in both French and English is an asset.

Preference will be given to candidates who are PMP members of the PMI (Program Management Institute).

Knowledge of the Client Engineering System and client Change Management process would be an asset.

Knowledge of Electrical Harness Design would be a strong asset.

An understanding of aerospace product certification is an asset.

Must be proficient with MS Office applications including MS Project, Power Point, Excel and Access.

Certification in Project Management is an asset

An understanding of aerospace product certification is an asset.
 
Job Number: 2154
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 07/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2167 - INDUSTRIAL ENGINEER - resume - word doc only

Description:
Elaborate, participate, maintain and improve an industrial strategy and manufacturing plan for the CSeries final assembly line.

Participate in the elaboration of production activities sequences for assembly stations.

Balance manpower needs according to organizational needs.

Define labor standards, balance and configure the positions and the assembly line to accommodate the different pace changes, analyze and make observations and take measures to determine the ratios of value-added activities.

Evaluate and propose key indicators to measure productivity of the assembly process and the performance measure.

Identify and propose improvement projects as well as participate and conduct Kaizen workshops in order to solve problems and find solutions, while engaging the team members.

Able to develop comprehensive strategies for industrial engineering.

Elaborate work charters, anteriority diagrams, operations sequences, performance calculations, elaboration of manpower needs, material flow analysis, work measurement, acceleration or decrease of pace.

Define project implementation strategy: content, scope, resources, timeframe, costs, risks, quality management, communications and training.

Industrial Engineering degree (Bachelor Degree is required)

Demonstrate skills in project management.

Must have minimum 8 years%u2019 experience as an Industrial Engineer balancing production lines.

Very good communicator and have good interpersonal skills (French & English). Must be functional in the French language, spoken and written.

Experience in a manufacturing environment is essential.

Ability to manage priorities and overcome setbacks.

Master industrial engineering techniques and value-added concepts (essential).

Are recognized as having a high level of initiative, autonomy, and innovation and to have practical sense.

Have mastered Microsoft Office tools.

Master with diagnostic tools such as VSM, material flow analysis, capacity analysis, etc.

Must be able to read technical drawings.
 
Job Number: 2167
Job Location: Mirabel, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/18/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2175 - STRESS ENGINEER - resume - word doc. only

Description:
Stress analysis in support to Non Conformity Reports (NCR) raised during production by working closely with production and liaison engineering.

Preliminary and detailed sizing.

Stress analyses to ensure requirements (static, fatigue, damage tolerance, weights, customers) are met.

Validation of engineering drawings and IPDT support.

Preparation of certification reports and support to entry-into-service.

Have a University mechanical or civil or aerospace engineering degree with a minimum of 5 years relevant experience.

Experience should include at least one of the following skills in the structural integrity qualification (loads, static, fatigue, and damage tolerance) of airplane components.

MRB Structures Stress on Client aircrafts is an asset.

Knowledge of CATIA, finite element modeling/analysis, and Nasgro is an asset. General computer skills are essential.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Must be able to read and write in English and have good communication skills.

Being completely bilingual (French and English) is an asset.
 
Job Number: 2175
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 07/12/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2180 - CABINET DESIGNER - resume word doc only

Description:
Act as a specialist in a specific system / monument

Define technical specifications, mechanical/electrical interfaces, design, integrate, certify, test and troubleshoot the above described systems.

Organize and attend design reviews taking into consideration industry regulations, client's aerospace design practices and requirements.

Be in direct contact with suppliers and responsible for the delivery of quality engineering documentation that meets Bombardier Standards.

Research, design and evaluate new technical concepts or emerging technologies. (Trade Shows, Air Shows, technical exhibitions, etc).

Procure parts and supply instructions drawings to employees to build mock-ups/prototype.

Provide definition engineering in relation with new designs%u2026

Support the creation of Interface Control Drawings (ICD)

Report status, identify and mitigate roadblocks

Point of contact on a technical level for designers

Accountable for engineering deliverables and milestones for a group of monuments

Must have a bachelor's degree in Mechanical Engineering with 5 to 8 year experience

Knowledgeable in 3D design with CATIA V5

Well organized and project oriented.

Team player, working in a multidisciplinary team.

Customer-oriented with innovative problem solving skills and you are organized.

You are autonomous, flexible and oriented toward result via your project management skill.

Experience with and have lead a small group of designers or equivalent.

Design experience in cabinet assembly design and/or cabinet installation

Good communication skills in French and English (written and verbal) are assets
 
Job Number: 2180
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 07/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2183 - STRESS ENGINEER - resume - cv. word doc only

Description:
Preliminary and detailed sizings.

Stress analyses to ensure requirements (strength, fatigue, damage tolerance, weights, customers) are met.

Validation of engineering drawings and IPDT support.

Preparation of certification reports and support to entry-into-service.

Have a University mechanical or civil or aerospace engineering degree with a minimum of 5 years relevant experience. Your experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Knowledge of CATIA, finite element modeling and analysis is an asset. General computer skills are essential.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Must be able to read and write in English and have good communication skills. Being completely bilingual (French and English) is an asset.

Must have knowledge and experience of structural sizing methodologies.

Must be competent in one of the following and have some knowledge of all other aspects of analysis (Structural stress analysis, FEM, fatigue/DTA and loads).

Must have experience in at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Must have Excellent knowledge of aircraft structure and system installation technical requirements ( TCCA, FAA & EASA).

Must have Experience of working with new design and must be able to demonstrate understanding of aircraft component load path and functions.

Must have experience using Patran and Nastran.

Must have working knowledge of Catia V5, finite element modeling and analysis is an asset.

Must be computer literate and familiar with commonly used software ( MS Office )
 
Job Number: 2183
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 07/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2191 - STRUCTURAL STRESS INTEGRATOR - resume word doc only

Description:
Perform sizing and support design activities for major interfaces between Structural Suppliers.

Monitor, support and provide guidance to the work package Structural Suppliers to ensure a quality product and supporting documentation are produced.

Ensure the harmonization of sizing methodologies and guidelines between the Structures work packages.

Review and approve structural substantiation reports from the Structural Suppliers.

Support the development, execution and revision of data for material allowable and sub-component structural testing.

Participate and assist in the coordination of Certification activities that directly pertains to the work package.

Provide clear visibility to management of the status and/or emerging issues related to the supported activities.

Bachelor's degree or a Master's degree in mechanical/aerospace engineering and a minimum of 15 years of relevant experience in the aerospace industry.

Previous experience in Aircraft Structural substantiation analysis.

Knowledge and experience of structural sizing methodologies as well as allowable and sub-component testing for composite material is a definite asset.

This position requires a confident, knowledgeable and energetic person with excellent communication and listening skills that is able to work in a team environment.

Must have experience using Patran and Nastran.

Must have working knowledge of Catia V5.

Previous experience in an integration role or function is required.

Must have excellent troubleshooting and problem solving skills.

Must have excellent communication skills.
 
Job Number: 2191
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/31/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2192 - SR&ED TAX CREDITS COORDINATOR

Description:
Coordinate the engineering activities of the SR&ED (Scientific Research & Experimental Development) tax credit program in Client with the Client taxation organization and a network of Business Units specialists.

Advise and provide training to Business Units specialists on the application of SR&ED tax credit eligibility rules in their activities.

Review and approve projects or SR&ED activities submitted internally by the business units

Develop tools and solutions to support the SR&ED tax credit claim.

Act as the point of contact with Business units and Canada Revenue Agency on technical matters under your responsibility.

Prepare and support audits by the Canada Revenue Agency.

Propose and execute continuous improvements linked to your mandates.

Team player; you share common goals with your business partners and put people first.

Have an engineering background, preferably a master in Aerospace, Mechanical, Electrical engineering or similar degree.

Acquainted with the Canada Revenue Agency SR&ED tax credit program, and have a minimum of 5 years' experience applying the program in Aerospace or other industries.

Understand aerospace technical challenges and look forward to further you understanding of innovation processes.

With an analytical mind, rigour and focus are your strengths.

Are able to concurrently execute regular activities and capture ad hoc opportunities

Possess good leadership and communication skills, and are very comfortable dealing with external parties.

Fluency in both English and French, written and oral forms, is required.

Must be proficient with MS Office applications including MS Project, Power Point, Excel and Access.

Canadian or Canadian Perm Residence only.
 
Job Number: 2192
Job Location: Montreal, Canada
Rate: 74.00 Canadian
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 06/13/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2198 - AVIONICS SPECIALIST - resume word doc only please

Description:
Review Systems architecture design to meet Aircraft Design Requirements & Objectives.

Participate in validation and lead verification activities of assigned system requirements.

Manage, review and approve where appropriate, the deliverables of the assigned system.

Plan short to medium term activities required to support development and certification of assigned system.

Chair weekly integrated product development team with cross-functional engineering discipline.

Keep accurate detail records and artifacts.

Write issue papers, advisory circular compliance matrices and certification plan.

Reviews and sign certification design compliance reports.

Reviews and sign electrical system schematics.

Support the flight test program; including witnessing of tests as required.

Bachelor's Degree in a relevant engineering discipline.

At least 5 to 10 years relevant experience with the design, development, integration and certification of avionics systems; previous experience with Flight Management System, network security, Air Data, Communication / Navigation would be an asset.

Familiar and understanding of pertinent TC, FAA and EASA rules and requirements.

Ability to work well in a team environment.

Ability to travel.

Must have a good knowledge of RTCA documents DO-178 and DO-160.

Must be familiar with part FAR25 / 525 certification process and with the ARP4754 standard.

Must have an experience with civil aircraft and airworthiness authorities (asset).

Must have strong communication skills (written and spoken).

Must have excellent troubleshooting skills.
 
Job Number: 2198
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 05/31/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2205 - STRUCTURAL GROUND. TEST INTEG. - resume word doc only

Description:
Lead multi-functional ground test review meetings.

Coordinate EXP internal activities to meet schedule and budget.

Work in close relationship with EXP Management and Program team.

Provide detail schedule and Status Report.

Execute EXP Test Portfolio following established priorities.

Interact technically with Client Suppliers to achieve Montreal site mandate.

Work in close interaction with Shop and QC (union staff).

Manage budget/operating plan definition and periodic tracking.

Prepare presentations and information for upper management.


Have a Degree in Mechanical engineering or equivalent experience.

Have a minimum of five 5 year experience in the aerospace industry, with close interaction with engineering and production teams.

Have strong communication skills both in English (written, spoken) and French (spoken).

Have good knowledge of MS Project (intermediate or advanced user).

Are a strong team player and can demonstrate superior organizational and leadership skills.

Are driven by results and autonomous.

Previous experience in Project Management is required.

A positive attitude and able to work in a fast-paced, high-pressure environment.

Must have strong communication and negotiation skills.

Must have excellent troubleshooting skills.

Must have Excellent Presentation Skills.
 
Job Number: 2205
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 07/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2212 - MANUFACTURING ENGINEER - word doc only

Description:
Administer and manage the budget estimates, schedules, planning, coordination and communication on all project stages

Prepare and lead workshops with multidisciplinary team

Write tenders and identify selected suppliers for the award of contract

Coordinate multidisciplinary resources involved in the project

Maintain and communicate effective project visibility through governance

Ensure compliance with deliverables (costs, deadlines and quality)

Identify, manage risks and assist in solving problems and obstacles associated to the project

Document success and opportunities

Provide feedback (post-mortem) on the project to main stakeholders

Participate in the improvement of the existing processes


Engineering degree or technical degree

Five to ten (5 - 10) years of experience in project management.

You master Catia V5 & MS Project Systems

Good knowledge manufacturing processes utilized in the aerospace industry

Organizational, leadership, teamwork and mobilization skills

Experience in project management

Good command of the software used for project management

Able to work under pressure and meet deadlines

Bilingual with good abilities for oral and written communication

Work under minimum supervision

Logical mindset, resourcefulness, detail oriented, rigor and discipline

Have analytical skills and ability to see the overall picture

French - English working knowledge an asset
 
Job Number: 2212
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 07/12/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2215 - DESIGNER & STRESS ANALYST - cv - word doc only

Description:
Preliminary and detailed sizings.

Stress analyses to ensure requirements (strength, fatigue, damage tolerance, weights, customers) are met.

Validation of engineering drawings and IPDT support.

Preparation of certification reports and support to entry-into-service.


University mechanical or civil or aerospace engineering degree with a minimum of 5 years relevant experience.

Your experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Knowledge of CATIA, finite element modeling and analysis is an asset. General computer skills are essential.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Must be able to read and write in English and have good communication skills. Being completely bilingual (French and English) is an asset.

Must have experience in Primary and Secondary Aircraft Structures.

Must have experience with Mechanical systems and systems installations.

Must have experience in design and creation of MBD and 2D drawings of detail parts (machined parts, sheet metal), assemblies and installation drawings in CATIA V5.

Must have working knowledge of CATIA V5 (minimum 2000H experience).

Must have the ability to understand complex engineering issues.

Basic knowledge required :
- 3D and MBD creation in CATIA V5
-GD&T and technical drawings
-Certification rules
-Manufacturing requirements

Must be computer literate and familiar with commonly used software ( MS Office )
 
Job Number: 2215
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/16/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

Admin Assistants - Ozark, AL

Description:
STS AeroStaff Services is currently hiring Admin Assistants for open positions in Ozark, Alabama.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Provides support for various departments through a variety of specialized functions such as entering, compiling, or arranging data, making computation
• Lays out and prepares reports, processing, and coding documents
• Files and maintains specialized and comprehensive records of various items

Qualifications:

• Bachelor's or associates degree may be a plus (high school diploma or equivalent required)
• Prefer 3 or more years’ previous clerical, administration or customer service experience, preferably in a regulated industry
• Additional experience may be a plus
• Aviation experience preferred, and/or working knowledge of industry practices

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 37904
Job Location: Ozark, AL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 06/14/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Email: Resumes@STSEngineering.com
Website: www.stsaviationgroup.com

Administrative Assistant 4

Description:
PDS Tech is seeking a candidate for the Administrative Assistant 4 position located in Orlando, FL.  
Handles multiple projects at the same time, projects can be as short as a day or as long as a few months. 
would coordinate and organize calls to get information to further process, analyze, y and compile in slides and informative packages. 
Must be analytical , very proficient in Excel , power point , efficient elements etc... 
Prepares, composes, and edits most complex slide presentations, documents and other correspondence.
Prepare and finalize presentations, reports, spreadsheets and other documents.
Guides the maintenance of database information. 

Preferred candidates would have experience with all above that can be referenced and / or Recent MBA graduates and / or Prospect MBA graduate and / or has experiences in Power generation / oil and gas services industry and / or consulting experience.
 
Job Number: 1710066799
Job Location: Orlando, FL
Duration: 5 months
Input Date: 04/14/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Audrei Cortez
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000021kg7&URLSource=cjhunter

Aeronautical Engineer - Level 2

Description:
Aeronautical Engineer - Level 2

Location: Lexington, KY
Rate: $40.00 - $50.00/HR
Duration: 1+ year contract
Shift: 1st Shift

**Candidates must have an Active Secret Clearance or have had one with the last 2 years**

Description
- Evaluates structure integrity using classic and finite element methods.
- Employ classic analysis methods to derive loads using rigid body calculations followed by construction of shear and bending moment diagrams, with the ultimate objective of stress state interactions and fastened joint stress interactions to determine margins of safety.
- Employ finite element methods, using industry standard tools such as FEMAP and NASTRAN to develop more accurate stiffness representations of load paths to perform loads analysis, for both rigid body correlations and internal loads extraction in support of classic stress and fastened joint calculations.

Skill/Experience/Education
Mandatory:
FEMAP/NASTRAN/Classic Methods/Structures Stress/B.S. Degree Engineering

Desired:
ANSYS/AFGROW/Microsoft Office Suite
 
Job Number: 7492
Job Location: Lexington, KY
Rate: $40.00 - $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1+ yr
Input Date: 07/20/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Aeronautical Engineer - Level 2

Description:
Aeronautical Engineer - Level 2

Location: Lexington, KY
Rate: $50.00 - $60.00/HR
Duration: 6+ month contract
Shift: 1st Shift

**Candidates must have an Active Secret Clearance or have had one with the last 2 years**

Description
- Evaluates structure integrity using classic and finite element methods.
- Employ classic analysis methods to derive loads using rigid body calculations followed by construction of shear and bending moment diagrams, with the ultimate objective of stress state interactions and fastened joint stress interactions to determine margins of safety.
- Employ finite element methods, using industry standard tools such as FEMAP and NASTRAN to develop more accurate stiffness representations of load paths to perform loads analysis, for both rigid body correlations and internal loads extraction in support of classic stress and fastened joint calculations.

Skill/Experience/Education
Mandatory:
FEMAP/NASTRAN/Classic Methods/Structures Stress/B.S. Degree Engineering

Desired:
ANSYS/AFGROW/Microsoft Office Suite
 
Job Number: 7491
Job Location: Lexington, KY
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 06/22/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Aeronautical Engineer - Level 2

Description:
Aeronautical Engineer - Level 2

Location: Lexington, KY
Rate: $55.00 - $65.00/HR
Duration: 6+ month contract
1st Shift

**MUST have an Active Secret Clearance or have had one within the last 2 years**

Job Description:
- Evaluates structure integrity using classic and finite element methods.
- Employ classic analysis methods to derive loads using rigid body calculations followed by construction of shear and bending moment diagrams, with the ultimate objective of stress state interactions and fastened joint stress interactions to determine margins of safety.
- Employ finite element methods, using industry standard tools such as FEMAP and NASTRAN to develop more accurate stiffness representations of load paths to perform loads analysis, for both rigid body correlations and internal loads extraction in support of classic stress and fastened joint calculations.

Skill/Experience/Education
Mandatory:
- B.S. Degree Engineering
- 6 - 8 years of experience as Primary Structures Stress Engineer
- Femap
- NASTRAN
- Classic Methods

Desired:
- ANSYS/AFGROW,
- Microsoft Office Suite
 
Job Number: 7449
Job Location: Lexington, KY
Rate: $55.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 06/22/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Aeronautical Engineer - Level 2 - KY - C

Description:
Chipton-Ross is seeking an Aeronautical Engineer - Level 2 for an opening in Lexington, KY.

RESPONSIBILITIES:
Evaluates structure integrity using classic and finite element methods. Employ classic analysis methods to derive loads using rigid body calculations followed by construction of shear and bending moment diagrams, with the ultimate objective of stress state interactions and fastened joint stress interactions to determine margins of safety. Employ finite element methods, using industry standard tools such as FEMAP and NASTRAN to develop more accurate stiffness representations of load paths to perform loads analysis, for both rigid body correlations and internal loads extraction in support of classic stress and fastened joint calculations.

REQUIRED EXPERIENCE:
FEMAP/NASTRAN/Classic Methods/Structures Stress

PREFERRED EXPERIENCE:
ANSYS/AFGROW/Microsoft Office Suite

EDUCATION:
B.S. Degree Engineering

WORK HOURS:
5/40, 1st Shift

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 163730
Job Location: Lexington, KY
Rate: $40 to $50.00 DOE
Duration: 9 Months
Input Date: 06/05/2017
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Aeronautical Engineer

Description:
Location: Lexington, KY
Rate: $55.00 - $75.00/HR
Duration: 6+ month contract
1st Shift
Overtime: Exempt

**MUST have an Active Secret Clearance or have had one within the last 2 years**

Job Description:
- Evaluates structure integrity using classic and finite element methods.
- Employ classic analysis methods to derive loads using rigid body calculations followed by construction of shear and bending moment diagrams, with the ultimate objective of stress state interactions and fastened joint stress interactions to determine margins of safety.
- Employ finite element methods, using industry standard tools such as FEMAP and NASTRAN to develop more accurate stiffness representations of load paths to perform loads analysis, for both rigid body correlations and internal loads extraction in support of classic stress and fastened joint calculations.

Skill/Experience/Education
Mandatory:
- B.S. Degree Engineering
- 5+ years of experience as Primary Structures Stress Engineer
- Femap
- NASTRAN
- Classic Methods

Desired:
- ANSYS/AFGROW,
- Microsoft Office Suite
 
Job Number: 7448
Job Location: Lexington, KY
Rate: $40.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 6+ mos
Input Date: 09/14/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Aeronautical Engineer - Level 3 - KY

Description:
Chipton-Ross is seeking a Aeronautical Engineer - Level 3 for an opening in Lexington, KY.

RESPONSIBILITIES:
Evaluates coupled solar radiation, airflow and conduction heat transfer by both classic methods and finite element analysis. Knowledge of a wide range of electronics equipment and cooling methods. Experienced in idealizing internal air flow and heat conduction paths into simplified representations to achieve efficient analysis. Determines appropriate boundary conditions, film coefficients and convection coefficients and is familiar with industry standard documents governing temperature requirements. Documents methods, calculations and results comprehensively and clearly, using industry standard substantiation format.

REQUIRED EXPERIENCE:
Coupled Flow Field and Thermal/ANSYS/BSME

PREFERRED EXPERIENCE:
FEMAP/Microsoft office suite/Stress Analysis Background

EDUCATION:
Bachelors of Science in Mechanical Engineering

WORK HOURS:
5/40

 
Job Number: 162918
Job Location: Lexington, KY
Rate: Up to $55.00 DOE
Duration: 6 Months
Input Date: 04/17/2017
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Aeronautical Engineer - Level 3 - KY - C

Description:
Chipton-Ross is seeking an Aeronautical Engineer - Level 3 for an opening in Lexington, KY.

RESPONSIBILITIES:
Evaluates structure integrity using classic and finite element methods. Employ classic analysis methods to derive loads using rigid body calculations followed by construction of shear and bending moment diagrams, with the ultimate objective of stress state interactions and fastened joint stress interactions to determine margins of safety. Employ finite element methods, using industry standard tools such as FEMAP and NASTRAN to develop more accurate stiffness representations of load paths to perform loads analysis, for both rigid body correlations and internal loads extraction in support of classic stress and fastened joint calculations.

REQUIRED EXPERIENCE:
Femap/NASTRAN/Classic Methods/Primary Structures Stress Engineer

PREFERRED EXPERIENCE:
ANSYS/AFGROW, Microsoft Office Suite

EDUCATION:
B.S. Degree Engineering

WORK HOURS:
5/40, 1st Shift

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 163760
Job Location: Lexington, KY
Rate: $60 to $75.00 DOE
Duration: 9 Months
Input Date: 06/07/2017
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

Aeronautical Engineer - Level 3 - KY - C

Description:
Chipton-Ross is seeking an Aeronautical Engineer - Level 3 for an opening in Lexington, KY.

RESPONSIBILITIES:
Evaluates structure integrity using classic and finite element methods. Employ classic analysis methods to derive loads using rigid body calculations followed by construction of shear and bending moment diagrams, with the ultimate objective of stress state interactions and fastened joint stress interactions to determine margins of safety. Employ finite element methods, using industry standard tools such as FEMAP and NASTRAN to develop more accurate stiffness representations of load paths to perform loads analysis, for both rigid body correlations and internal loads extraction in support of classic stress and fastened joint calculations.

REQUIRED EXPERIENCE:
Femap/NASTRAN/Classic Methods/Primary Structures Stress Engineer

PREFERRED EXPERIENCE:
ANSYS/AFGROW, Microsoft Office Suite

EDUCATION:
B.S. Degree Engineering

WORK HOURS:
5/40, 1st Shift

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 163761
Job Location: Lexington, KY
Rate: $60 to $75.00 DOE
Duration: 9 Months
Input Date: 06/07/2017
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Aeronautical Engineer - Level 3 - KY - C

Description:
Chipton-Ross is seeking an Aeronautical Engineer - Level 3 for an opening in Lexington, KY.

RESPONSIBILITIES:
Evaluates coupled solar radiation, airflow and conduction heat transfer by both classic methods and finite element analysis. Knowledge of a wide range of electronics equipment and cooling methods. Experienced in idealizing internal air flow and heat conduction paths into simplified representations to achieve efficient analysis. Determines appropriate boundary conditions, film coefficients and convection coefficients and is familiar with industry standard documents governing temperature requirements. Documents methods, calculations and results comprehensively and clearly, using industry standard substantiation format.

REQUIRED EXPERIENCE:
Coupled Flow Field and Thermal/ANSYS/BSME

PREFERRED EXPERIENCE:
FEMAP/Microsoft office suite/Stress Analysis Background

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
5/40, 1st Shift

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 163729
Job Location: Lexington, KY
Rate: $55 to $75.00 DOE
Duration: 9 Months
Input Date: 06/05/2017
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Aeronautical Engineer - Level 3 - KY - C

Description:
Chipton-Ross is seeking a Aeronautical Engineer - Level 3 for an opening in Lexington, KY.

RESPONSIBILITIES:
Evaluates structure integrity using classic and finite element methods. Employ classic analysis methods to derive loads using rigid body calculations followed by construction of shear and bending moment diagrams, with the ultimate objective of stress state interactions and fastened joint stress interactions to determine margins of safety. Employ finite element methods, using industry standard tools such as FEMAP and NASTRAN to develop more accurate stiffness representations of load paths to perform loads analysis, for both rigid body correlations and internal loads extraction in support of classic stress and fastened joint calculations.

REQUIRED EXPERIENCE:
Femap/NASTRAN/Classic Methods/Primary Structures Stress Engineer

PREFERRED EXPERIENCE:
ANSYS/AFGROW, Microsoft Office Suite

EDUCATION:
B.S. Degree Engineering

WORK HOURS:
5/40, 1st Shift

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 163658
Job Location: Lexington, KY
Rate: $55 to $75.00 DOE
Duration: 9 Months
Input Date: 05/31/2017
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Aeronautical Engineer - Level 3 - KY - C

Description:
Chipton-Ross is seeking an Aeronautical Engineer - Level 3 located in Lexington, KY

RESPONSIBILITIES:
Evaluates structure integrity using classic and finite element methods. Employ classic analysis methods to derive loads using rigid body calculations followed by construction of shear and bending moment diagrams, with the ultimate objective of stress state interactions and fastened joint stress interactions to determine margins of safety. Employ finite element methods, using industry standard tools such as FEMAP and NASTRAN to develop more accurate stiffness representations of load paths to perform loads analysis, for both rigid body correlations and internal loads extraction in support of classic stress and fastened joint calculations.

Desired Skills:
ANSYS/AFGROW, Microsoft Office Suite

EDUCATION:
Femap/NASTRAN/Classic Methods/Primary Structures Stress Engineer/B.S. Degree Engineering

WORK HOURS:
5/40 work week
First Shift

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 162915
Job Location: Lexington, KY
Rate: $55 to $65.00 DOE
Duration: 11 MONTHS
Input Date: 04/17/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: daubert@chiptonross.com
Website: www.chiptonross.com

Aeronautical Engineer - Level 3 - KY - C -

Description:
Chipton-Ross is seeking an Aeronautical Engineer - Level 3 for an opening in Lexington, KY.

RESPONSIBILITIES:
Evaluates structure integrity using classic and finite element methods. Employ classic analysis methods to derive loads using rigid body calculations followed by construction of shear and bending moment diagrams, with the ultimate objective of stress state interactions and fastened joint stress interactions to determine margins of safety. Employ finite element methods, using industry standard tools such as FEMAP and NASTRAN to develop more accurate stiffness representations of load paths to perform loads analysis, for both rigid body correlations and internal loads extraction in support of classic stress and fastened joint calculations.

REQUIRED EXPERIENCE:
Femap/NASTRAN/Classic Methods/Primary Structures Stress Engineer

PREFERRED EXPERIENCE:
ANSYS/AFGROW, Microsoft Office Suite

EDUCATION:
B.S. Degree Engineering

WORK HOURS:
5/40, 1st Shift

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 163431
Job Location: Lexington, KY
Rate: $55 to $65.00 DOE
Duration: 10 Months
Input Date: 05/19/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: daubert@chiptonross.com
Website: www.chiptonross.com

Stress Engineer - Interim Secret Clearance

Description:
PDS Tech, Inc. is seeking an Aeronautical Engineer - Level 3 for an open position in Lexington, KY.
Job Description: 
  • Evaluates structure integrity using classic and finite element methods.
  • Employ classic analysis methods to derive loads using rigid body calculations followed by construction of shear and bending moment diagrams, with the ultimate objective of stress state interactions and fastened joint stress interactions to determine margins of safety.
  • Employ finite element methods, using industry standard tools such as FEMAP and NASTRAN to develop more accurate stiffness representations of load paths to perform loads analysis, for both rigid body correlations and internal loads extraction in support of classic stress and fastened joint calculations. 



 
Mandatory Skills:
  • Femap/NASTRAN/Classic Methods/Primary Structures Stress Engineer/B.S. Degree Engineering
  • Senior Stress Engineer = Predominant and most recent experience in structures and stress engineering  
  • Interim Secret Clearance Required 



Desired Skills:

  • ANSYS/AFGROW, Microsoft Office Suite 

 
Job Number: 1710068871
Job Location: Lexington, KY
Duration: 9 months
Input Date: 06/01/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002JsWr&URLSource=cjhunter

Stress Engineer - Level 3 - Interim Secret Clearance

Description:
PDS Tech, Inc. is seeking an Aeronautical Engineer - Level 3 for an open position in Lexington, KY.
Job Description: 
  • Evaluates structure integrity using classic and finite element methods.
  • Employ classic analysis methods to derive loads using rigid body calculations followed by construction of shear and bending moment diagrams, with the ultimate objective of stress state interactions and fastened joint stress interactions to determine margins of safety.
  • Employ finite element methods, using industry standard tools such as FEMAP and NASTRAN to develop more accurate stiffness representations of load paths to perform loads analysis, for both rigid body correlations and internal loads extraction in support of classic stress and fastened joint calculations. 



 
Mandatory Skills:
  • Femap/NASTRAN/Classic Methods/Primary Structures Stress Engineer/B.S. Degree Engineering
  • Senior Stress Engineer = Predominant and most recent experience in structures and stress engineering  

 Interim Secret Clearance Required 

Desired Skills:

  • ANSYS/AFGROW, Microsoft Office Suite 

 
Job Number: 1710068445
Job Location: Lexington, KY
Duration: 10 months
Input Date: 05/22/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000012cUB&URLSource=cjhunter

Aeronautical Engineer – Level 3

Description:
Aeronautical Engineer – Level 3

Location: Lexington, KY
Rate: $60.00 - $75.00/HR
Duration: 6+ month contract
Shift: 1st Shift

**Candidates must have an Active Secret Clearance or have had one with the last 2 years**


Description
- Evaluates structure integrity using classic and finite element methods.
- Employ classic analysis methods to derive loads using rigid body calculations followed by construction of shear and bending moment diagrams, with the ultimate objective of stress state interactions and fastened joint stress interactions to determine margins of safety.
- Employ finite element methods, using industry standard tools such as FEMAP and NASTRAN to develop more accurate stiffness representations of load paths to perform loads analysis, for both rigid body correlations and internal loads extraction in support of classic stress and fastened joint calculations.

Skill/Experience/Education
Mandatory:
- 11+ years of structures and stress engineering
- Femap/NASTRAN/Classic Methods/Primary Structures Stress Engineer/B.S. Degree Engineering

Desired:
ANSYS/AFGROW, Microsoft Office Suite
 
Job Number: 7505
Job Location: Lexington, KY
Rate: $60.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 06/07/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Aeronautical Engineer – Level 3

Description:
Aeronautical Engineer – Level 3

Location: Lexington, KY
Rate: $60.00 - $75.00/HR
Duration: 6+ month contract
Shift: 1st Shift

**Candidates must have an Active Secret Clearance or have had one with the last 2 years**


Description
- Evaluates structure integrity using classic and finite element methods.
- Employ classic analysis methods to derive loads using rigid body calculations followed by construction of shear and bending moment diagrams, with the ultimate objective of stress state interactions and fastened joint stress interactions to determine margins of safety.
- Employ finite element methods, using industry standard tools such as FEMAP and NASTRAN to develop more accurate stiffness representations of load paths to perform loads analysis, for both rigid body correlations and internal loads extraction in support of classic stress and fastened joint calculations.

Skill/Experience/Education
Mandatory:
- 11+ years of structures and stress engineering
- Femap/NASTRAN/Classic Methods/Primary Structures Stress Engineer/B.S. Degree Engineering

Desired:
ANSYS/AFGROW, Microsoft Office Suite
 
Job Number: 7504
Job Location: Lexington, KY
Rate: $60.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 06/07/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Aeronautical Engineer – Level 3

Description:
Aeronautical Engineer – Level 3

Location: Lexington, KY
Rate: $55.00 - $75.00/HR
Duration: 6+ month contract
Shift: 1st Shift
Overtime: Exempt

**Candidates must have an Active Secret Clearance or have had one with the last 2 years**

Description
- Evaluates coupled solar radiation, airflow and conduction heat transfer by both classic methods and finite element analysis.
- Knowledge of a wide range of electronics equipment and cooling methods.
- Experienced in idealizing internal air flow and heat conduction paths into simplified representations to achieve efficient analysis.
- Determines appropriate boundary conditions, film coefficients and convection coefficients and is familiar with industry standard documents governing temperature requirements.
- Documents methods, calculations and results comprehensively and clearly, using industry standard substantiation format.

Skill/Experience/Education
Mandatory:
- 11+ years of experience with heat transfer
- Coupled Flow Field and Thermal/ANSYS/BSME

Desired:
FEMAP/Microsoft office suite/Stress Analysis Background
 
Job Number: 7494
Job Location: Lexington, KY
Rate: $55.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 6+ mos
Input Date: 09/14/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Aerospace CMM Inspectors - Hawthorne, CA

Description:
STS AeroStaff Services is currently hiring Aerospace CMM Inspectors for open positions in Hawthorne, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Surface plate work/inspection
• Inspect supplied product according to the applicable drawing and or work order specifications to verify that it conforms to all design requirements
• Perform repetitive inspection following standardized methods
• Perform receiving inspections, first article inspections, and production inspections
• In-Process Inspection: Visual and/or dimensional inspection of precision machined and sheet metal parts
• Interact proactively with other departments to improve products and reduce cost
• Communicate help resolve quality related issues as they relate to the shops production and Document production non-conformances in accordance with prescribed procedures and processes as required
• Support Quality Management System policies and procedure documentation, assess compliance to company and industry standards, initiate and lead continual improvement and Lean Manufacturing initiatives
• Work in a cross functional environment utilizing PC-DMIS programming skills as applied to an Articulating Romer ARM and CMMs
• Create, maintain and verify CMM programs used for the measurements of manufactured and supplied parts
• Performs documentation review and verification of certifications, specifications, and conformance to design and specification requirements

Basic Qualifications:

• Must be a U.S. Citizen
• High school diploma or GED is required
• Must be knowledgeable of sheet metal fabrication process
• Experienced with the inspection of sheet metal parts
• Able to read and interpret various mechanical drawings and blueprints
• Ability to utilize hand tools for inspection, i.e. micrometers, calipers, scales, gauges and height gauges
• Clear understanding of document control processes
• Ability to relate and interact with staff at all levels of the organization
• Works independently and is self-directed
• Experience with GD&T is desired
• Able to multi-task between production checks and FAIs
• Minimum of 3 years’ of precision mechanical inspection experience required
• Minimum of 3 years of CMM or ROMER/Faro Arm experience required
• At least 3 years’ of practical experience in a launch vehicle/spacecraft hardware integration environment
• Must be able to read and interpret design drawings and CAD models

Preferred Skills and Experience:

• Aerospace precision inspection experience
• ISO 9001 / AS9100 experience
• CMM experience with PC-DMIS software experience
• NC inspection experience with PC-DMIS NC/ CAPPS NC
• Romer Arm experience with Verisurf/ PCDMIS software
• Solid computer skills in Microsoft Word, Outlook and Excel
• DCC (Direct Computer Control) experience
• Statistical process controls experience a plus
• Ability to detect design and drawing flaws
• Ability to read and interpret engineering drawings and specification using ASME Y14.5
• GD&T and skillful use of metrology tools and gauges
• Example: Thread gauge, profilometer, height gauge, calipers, micrometers, etc.

Additional Requirements:

• Must be able to lift up to 25lbs. unassisted
• Must be able to work either 1st Shift (5:00am-3:30pm) or 2nd shift hours (3:30pm-2:00am) based on staffing needs, and overtime as needed
• Must be able to stand for extended periods – 8 hours min
• Must be able to work all shift hours, able to work overtime and weekend as needed

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38989
Job Location: Hawthorne, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 06/13/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Email: Resumes@STSEngineering.com
Website: www.stsaviationgroup.com

Aerospace Industrial Engineer(1 shift)

Description:
Role: Aerospace Industrial Engineer(1 shift)

Location: Wichita, KS

Duration:1 year+

Description :

Analyzes and designs sequence of operations and work flow to improve efficiencies in plant and production facilities and equipment layouts; and establishes methods for maximum utilization of production facilities and personnel and optimization of product flow. Conducts studies pertaining to cost control, cost reduction, inventory control, and production record systems.

•Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience.

Project: Shop support. Will be working on Rate Readiness, tool improvements and metrics.
 
Job Number: 51822
Job Location: Wichita, KS
Input Date: 06/13/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bala
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Email: balap@butler.com
Website: www.butler.com

Aerospace Test Engineer - California

Description:
Leading aircraft company are seeking an experienced Aerospace Test Engineer to support the development, integration and testing of an ejectable flight data recorder project. This is in the early stages of the project and the role will support all phases of system development including design and analysis, requirements compliance methods, certification (verification / validation) test preparation, and integration into large scale commercial aircraft environments.

Responsibilities include:

* Identify testing required for verification and validation using industry standards & regulations
* Prepare system and component functional and performance certification test procedures, manufacturing test methods and procedures, in accordance with input from other team members.
* Review and evaluate identified program functional and performance requirements for applicability to program goals and objectives.
* Establish testing protocols and test requirements based upon test specifications, drawings, as well as manufacturing and process specifications.
* Identify industry standard test equipment and resources
* Conduct and/or witness mechanical and environmental tests for FAA certification. .
* Test and certification will include subcomponent and component system qualification, for both mechanical and electrical requirements
* Position will require interfacing with the FAA or designated engineering representative, preparation of technical status presentations and leading detailed test reviews.

You will have considerable experience in aerospace structural and electrical testing and must be familiar with aerospace test standards MIL-STD-810 and DO-160, with DO-178 and DO-254 knowledge preferred. A working knowledge of CATIA V5 and DOORS requirements management tool would also be useful.

Experience must include a strong background in the aerospace engineering requirements and verification process and the ability to understand mechanical and electrical aerospace drawings, environmental requirements, test requirements, and various aerospace test methods.

This is an initial 12 month contract, working on a long-term project, so work is likely to extend for at least 2 years.
 
Job Number: JO0000000012
Job Location: Newport Beach, CA
Rate: to $75/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 07/21/2017
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Email: jobs@strongfieldtech.com
Website: www.strongfield.com

Air Systems Engineer-Lead

Description:
Primary Responsibilities:
Candidate will be responsible for leading projects, defining scope and responsibilities, leading a team of engineers/designers.
Will be required to thoroughly check drawings for design intent and check Bill of Materials.
Must ensure drawings and deliverables meet the scope and client expectations.
Support procurement activities, including coordination with vendors and vendor drawings review.
Support contractor reviews, and installation planning activities.
Individual will travel globally for machine installation, check out and start up
Candidate will plan the work, and track and report work in progress.
Will lead a design team for projects, and work with other disciplines to assure the project design is complete and accurate.
 
BS or MS in Mechanical or Chemical Engineering required.
10 to 12 years’ of related experience in the consumer products industry or any related industry is required. Experience with an engineering consulting firm is a plus.
Candidate should possess good experience on air systems, which include high vacuum systems, low vacuum systems, forced air systems, dust collection equipment like bag filters, RACF (reverse air flow cleaning filters), cartridge filters, trim collectors etc., vacuum material handling and vacuum conveying system concepts.
Knowledge of spark suppression and explosion suppression systems is preferred.
Experience on installation and duct traverse flow data collection would be added advantage.
Candidate must be able to calculate air balance, mass balance, line sizing, duct sizing, process vacuum requirements based on functions, and system pressure drop calculations.
Knowledge of international standards such as AMCA, ASHRAE , SMANCA ACGIL are required.
Should be able to select and size the fans, duct, and other air system elements like cyclones, filters etc.
Candidate must possess good communication skills and be able to successfully interact with clients on global projects.
Microsoft Office experience is required.
AutoCAD and SolidWorks experience is preferred.
Domestic and international travel will be required.
 
 
Job Number: 1610057845
Job Location: Green Bay, WI
Duration: 4 months
Input Date: 10/06/2016
Firm Name: PDS TECHNICAL SERVICES
Attention: Sue Van Pay
Address: 110 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 920/499-9943
800 Phone: 800/333-1389
Fax Phone: 920/499-9067
Email: cecjgreenbay@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002Fhdv&URLSource=cjhunter

Aircraft Engine Test Engineer

Description:
An aero engine company in Shanghai, China is currently looking for engineers with extensive experiences in the field as follows:
1) Testing
2) Engine test
3) Flight test

1.  Bachelor degree or above in Aerospace Engineering, Mechanical Engineering or related degree
2. Minimum 10 years related experience in aerospace or aero engine industries 
3. Good knowledge of the function of engine components and systems, understanding of engine controls
4. Knowledge of integration of testing, validation and certification of aero engines
5. General knowledge of aircraft maintenance and engineering operations
 

 
Job Number: 1710069373
Job Location: Shanghai,
Duration: 12 months
Input Date: 06/13/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002K3bg&URLSource=cjhunter

Aircraft Painter (35) - OR

Description:
Chipton-Ross is seeking 35 Marine Painters for openings in Portland, OR.

RESPONSIBILITIES:
Looking for Marine painters with experience working on Aircraft or Large Boats.

REQUIRED EXPERIENCE:
- 2-3 years experience
- Electrostatic Spray Gun
- High Pressure Spray Gun
- Mini Jet Spray Gun
- Marine, Auto body or Industrial Painters preferably with HVLP (High Volume Low Pressure) air-fed electro-static paint sprayers.
- At least 2+ years of Industrial and/or Commercial marine/transportation painting experience is highly desired.


ADDITIONAL EXPERIENCE:
Refurbishing experience a big plus.

EDUCATION:
High School Diploma

VARIABLE SHIFT
Shifts are 4- 12 hour shifts.
4 days on, 4 days off

ADDITIONAL:

May pay as low as $15 for an entry level position and if candidate doesn't test as well as expected.
Position may be temp to perm or direct placement, depending on client's needs a candidate's testing.
Client will expect testing for all candidates that they are interested in and show that they have an interest in committing to this opportunity. Client will coordinate and pay for round trip flight to Portland and also give one day of per diem. Skills tests are on Wed, Thurs, Fri. If skills test is passed, client will determine if candidate is Jr. or Sr, and make an offer based on results of testing.

May go up to $22/hour for 2-3 yrs expereince with a STRONG skilll set. Client hopes to move those hired to a Senior Painting position within 3 months, and Senior positions there pay $25.

Shifts are 4- 12 hour shifts. 4 days on, 4 days off with a 10-15% shift differential available.


 
Job Number: 162173
Job Location: Portland, OR
Rate: $22 to $25.00 DOE
Duration: PERM
Input Date: 02/28/2017
Firm Name: CHIPTON ROSS
Attention: Leila Morrow
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmorrow@chiptonross.com
Website: www.chiptonross.com

Aircraft Stability & Control Analyst (Performance & Handling Qualities)

Description:
US Persons ONLY -
• 8+ years of experience in Stability and Control: vehicle stability, dynamic stability, controlability; Performance experience is a plus but majority should come from S&C and flight dynamics.
• Transonic vehicle experience required; Supersonic vehicle experience a plus
• Experience in reversible flight controls
• Experience with SIDPAC toolset a plus


Job Title: Aerodynamicist with Performance & Handling Qualities (P&HQ) expertise. Seeking an experienced cross-disciplinary engineer with experiences in aerodynamics and computational fluid dynamics. The candidate will build on an intimate knowledge of all aircraft systems and have the ability to support and develop new project initiatives.

Responsibilities:
• Support event simulation model development and validation of performance, handling qualities, stability, and control criteria for suborbital space missions
• Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
• Works with other engineering groups to ensure proper application of design and P&HQ requirements
• Supports entry into commercial service by ensuring that regulatory and internal company requirements related to loads are met
• Develop standardized analysis and reporting tools
• Perform model updates from data collected during vehicle or component testing and data created with analytical tools
• Develop and maintain P&HQ databases for use in analysis during all flight phases
• Develop and substantiate rational P&HQ criteria and requirements for unique vehicles with unconventional configurations
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Anticipates and resolves issues by developing standards and guidelines
• Ability to problem solve with a balance of technical product, cost, and schedule


Qualifications:
Professional Requirements
• Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 8 years of experience in aerodynamics development
• Experiences in wind-tunnel and flight test aerodynamic model validation
• Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
• Test plan development and data analysis experience a strong plus
• Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
• Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
• Advanced skills with Linux, Python, Simulink, MATLAB, Fortran, C, C++, and software development best practices.
• CATIA V5 experience preferred
• Air Data Experience preferred
• Experience with FUN3D, NSU3D, Pointwise, and/or similar RANS and gridding methods
• Applicants must be U.S. persons


The Structures Company, LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 09/13/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: MarkSharp@thestructurescompany.com
Website: www.thestructurescompany.com

Aircraft Stress Engineers - Active Secret Clearance

Description:
Composite Structural Analysts
Role description & Responsibilities:
Highly motivated structural analysis engineer with composite structures and assemblies for military and/or commercial aircraft. The candidate should also have experience with the characterization of composite materials with ASTM standard tests. Responsibilities will include but are not limited to the analysis of laminates, sandwich structures, bonded and bolted assemblies, and leading composite material characterization activities including: authoring test plans and test reports, data reduction and calculation of material allowables.
Experience Requirements:
� MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE
� BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 7 years related experience in design engineering function
� Minimum of 4 years of experience with Abaqus and/or Nastran
� Static structural and structural/thermal analysis
� Buckling, stability, and modal analysis
� Loads definition
� Material characterization testing
� Knowledge of composite materials and manufacturing processes
� Oral and written communication skills
� Ability to work in a fast paced dynamic environment as part of a multi-discipline team

Experience Preferred:
� Proficiency with NX, Catia V5, Fibersim, MSC Marc, Altair Hyperworks/Optistruct, and Hypersizer are also desirable
� Definition of layups and ply patterns with Fibersim to generate finite element models
� Script writing, workflow automation
� Constitutive Model Development and implementation
� Requirements definition and verification
� Previous experience in aerospace manufacturing facility
Skills & Qualifications:
� Strong interpersonal skills with the ability to work with a team
� Excellent communication skills are required.
� Ability to make sound decisions
� Ability to multi-task
� Ability to prioritize and manage time effectively
Education/Certifications:
� BS degree in Civil, Mechanical, Aerospace Engineering, or related

The Structures Company is an AA/EOE.
 
Job Location: UT
Rate: $75-95/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 05/31/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

Altium Circuit Board Designer

Description:
An Leading Aerospace company, located in Canoga Park, CA, is seeking an Altium Circuit Board Designer for a 5+ month contract role.

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


-Must have Altium Design experience specifically with using both schematic capture, and board layout design for power supplies (high voltage and high current).

-Must have good drafting skills per GD&T rules.

The primary duty is to generate Printed Wire Boards (PWB) on Altium PWB Design Tools for applications our design programs. This assignment will require an experienced individual that can work closely with electrical/electronics circuit designers and electro-mechanical designers in a team environment.

Skills:
-Must have ALTIUM design experience specifically. Other PWB tools are not applicable.
-Extensive (6+ years) experience in the design, development and generation of PWB drawings.

Must have experience in the developing the assembly drawings at the Circuit Card Assembly/Printed Wiring Assembly (CCA/PWA) level using either CREO or newly release Drafting Option within Altium.

-GD&T experience is required.

Education:
-BSEE with 5 years of experience or 10+ years of direct industry experience in design and development of Printed Wiring Boards and Circuit Card Assemblies.
 
Job Number: 12240
Job Location: Canoga Park, CA
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 5 Months+
Start Date: July
Input Date: 06/07/2017
Firm Name: LOGIN CONSULTING SERVICES
Attention: Tali Lerea
Address: 300 CONTINENTAL BLVD STE 530
City, State: EL SEGUNDO, CA 90245-5067
Phone: 310/607-9091
Fax Phone: 310/607-9818
Email: tali.lerea@loginconsult.com
Website: www.loginconsult.com

Appraisal Customer Service

Description:
PDS Tech is seeking Appraisal Customer Service for an open position in Coraopolis, PA

JOB SUMMARY
Responsible for interacting with Settlement Services clients and business functional operations departments to insure that appraisal orders are processed according to client requirements and delivered timely.

ESSENTIAL JOB FUNCTIONS
1.Fields incoming phone calls and email requests from ESS clients. Provides order status via email, phone and Vision status notes. Contacts internal departments for status of late appraisals. Monitors daily work in progress reports to identify overdue appraisals.
2.Fields incoming client phone calls, email status and issue resolution requests.
3.Utilizes a daily work in progress report and the call system, to insure the resolution of internal calls and the timely processing of client appraisal orders.
4.Regularly communicates with clients and company departments via phone, email and by entering order status notes into the order management platform.
5.Delivers superior customer service, effectively communicates via email and phone, manages their work utilizing reports, and effectively communicates order status with other departments.
6.Other duties as assigned.
 
EDUCATION / EXPERIENCE REQUIREMENTS
 
•Graduation from a 4-year college or university with major course work in a discipline related to the requirements of the position is preferred.
•Proficient in Microsoft Office Suite
•1 year of related mortgage industry experience/training
 
PHYSICAL CONDITIONS/WORKING ENVIRONMENT
 
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
 
Individuals may need to sit or stand as needed; may require walking, primarily on a level surface, throughout the day;  reaching above shoulder heights, below the waist or lifting as required to file documents or store materials; proper lifting techniques required; may include lifting up to 25 pounds for files or paper.
 
Note any additional physical requirements for the job (e.g. heavy lifting requirements).
 
 
Job Number: 1610051969
Job Location: Coraopolis, PA
Duration: 6 months
Input Date: 06/27/2016
Firm Name: PDS TECHNICAL SERVICES
Attention: Ali Khan
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000001sip8&URLSource=cjhunter

Assembler Level 3

Description:
PDS Tech is seeking a candidate for Assembler- Level 3 in Torrance CA.

Assembles fabricated parts at floor stations.
Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
Uses hand tools and power tools to assemble units according to product specifications.
Identifies units that fail tests or tolerance levels and repairs as necessary.
Special Considerations: Lifting is generally at or below 30Lbs. without significant repetitions.
Moderate exposure to machinery, chemical, biological, and physical risks is anticipated.
Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures. 
Requires a high school diploma or its equivalent.
May be required to complete an apprenticeship and/or formal training in area of specialty.
May require 4-6 years of experience in the field or in a related area.
 
Job Number: 1710066126
Job Location: Torrance, CA
Duration: 6 months
Input Date: 03/31/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Israel Ireneo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000021bd5&URLSource=cjhunter

Assembler Level 3

Description:
PDS Tech is seeking a candidate for Assembler- Level 3 in Torrance CA.

Assembles fabricated parts at floor stations.
Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
Uses hand tools and power tools to assemble units according to product specifications.
Identifies units that fail tests or tolerance levels and repairs as necessary.
Special Considerations: Lifting is generally at or below 30Lbs. without significant repetitions.
Moderate exposure to machinery, chemical, biological, and physical risks is anticipated.
Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures. 
Requires a high school diploma or its equivalent.
May be required to complete an apprenticeship and/or formal training in area of specialty.
May require 4-6 years of experience in the field or in a related area.
 
Job Number: 1710066129
Job Location: Torrance, CA
Duration: 6 months
Input Date: 03/31/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Israel Ireneo
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000021bdP&URLSource=cjhunter

Assembly Mechanic - Level 1

Description:
PDS Tech, Inc. is seeking a candidate for Assembly Mechanic - Level 1 position located in Memphis, TN.

In your role, you will:

  • Constructs, maintains, and tests mechanical equipment, machinery, and components.
  • Identifies parts for replacement and machines that need new parts and places orders as necessary.


Special Considerations:

  • Lifting is generally at or below 30Lbs. without significant repetitions.
  • Moderate exposure to machinery, chemical, biological, and physical risks is anticipated.
  • Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures. 

  • Requires a high school diploma or its equivalent.
  • May be required to complete an apprenticeship and/or formal training in area of specialty.
  • May require 0-2 years of experience in the field or in a related area.
  • Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
  • Relies on instructions and pre-established guidelines to perform the functions of the job.
  • Works under immediate supervision. 

 
Job Number: 1710067388
Job Location: Memphis, TN
Duration: 7 months
Input Date: 04/27/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Shannon White
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000012QiK&URLSource=cjhunter

Avionics Systems Engineer

Description:
Description:
• Seeking a candidate for a Commercial Avionics Systems Engineer to be an integral part of a small and fast-paced team supporting the engineering projects, product development, and test.
• Researches, develops, designs, and tests electrical components, equipment, systems, and networks.
• Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
• Airframes may include but are not limited to S-76, S-92 and their derivatives, including integration of new technologies into the S-92.

Primary Responsibilities
• Development of requirements
• System Integration
• Generation of lab and aircraft test procedures
• Troubleshooting avionics issues on test, production, and fielded aircraft
• Support program management reviews

Beneficial Experience
• FAA and foreign certification (preferred)
• DO-178B, DO-160 and DO-254 processes (preferred)
• Technical project management (preferred)
• Supplier technical management (preferred)
• Pilot or A&P experience (preferred)

Educational Requirements:
• BS Engineering in a related field w/7+ years relevant professional experience
• Will consider non-degreed candidates who have equivalent professional experience (11+ years)
 
Job Number: 1551
Job Location: Trumbull, CT
Rate: 55.00
Per Diem: Yes, Split
Overtime: Some
Duration: 18 Months, with possible extension
Start Date: ASAP
Input Date: 06/05/2017
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Email: lokeefe@nesc.com
Website: www.nesc.com

Branch Manager

Description:
Our Client: Intl Freight Forwarder, Seeking:

BRANCH MANAGER- SAN FRANCISCO, CA
Overseeing 8-10 Direct reports with a Branch operation of 35-45.

Fulfill and exceed customer expectations by providing the highest possible service quality to the customers
* Optimize the transaction, Increase sales and decrease costs
* Responsible for strong growth within the Branch and maximal utilization of business potential
* Continuous strive for high productivity, competitive efficiency and best quality
* Willcontinuously strive for maximum productivity to assume best use of all resources
* Fully adhere to all defined global processes, policies and standards and to local law

Responsibility for all operational activities of Branch.
* Responsible for the financial results and the continuous supervision of the financial status, including activities in the field of accounting, financial controlling and strategic planning
* Prepare the local budget including the investment program, together with detailed documentation according to the instructions issued by Corporate Controlling
* Develop and expand customer relationships
* Implement the Internal Control System (ICS) and all processes included in the Internal Management System (IMS)
* Responsible for the standardization of processes, structures and systems according to corporate decisions
* Arrange and continuously optimize organizational structures, including internal service providers, shared service and competence centers.
* Responsible for the supervision of personnel matters, with particular emphasis on staff training and career planning in cooperation with local HR
* Ensure the adherence to instructions, policies and guidelines defined by Global Process and corporate functions

Inform him/herself about all applicable local and international laws, regulations, and legal obligations and of ensuring compliance
* Ensure a regular and consistent information flow to the Country/Area Management about all important matters.
* Responsibility for budget and business performance on Branch level
* Disciplinary responsibility for all direct reports
* As defined in the Global Signing Policy

Functional know-how in air / logistics / SCM
* Understanding of Company's strategy and products
* Knowledge about markets & competitors, about trends & challenges for our industry
* Business Acumen (understands principles and language, incl. the fundamentals of finance and profitability
* Solid business administration competence
* Has an overall understanding of business processes and independencies


Job Requirements:
* Good strategic and planning skills, ability to translate strategy to operational plan and execute
* Proven track record in People management and Leadership Skills (knowledgeable in Recruitment Selection/Training/Development/Coaching/Conflict Management/Performance Management)
* Good communication skills (open and confidential communication style)
* Solid know how in change management and innovation (analytical, systematic, creative, inventive)
* Strong decision-making capabilities and high accountability
* High result orientation and customer focus
* Ability to integrate and coordinate efforts/resources across functions and boundaries
* Management and organizational skills (prioritize, plan, assign, delegate, control)
* Act as a role model for Corporate Values and fully adheres to the Code of Conduct

Educational background / Work Experience

* Higher education level in Forwarding and Business Administration, B.S. Degree Preferred.
* Management experience (minimum 5 years)
* Working experience (minimum 5 years)
* Industry experience (minimum 3 years)
* Preferably international working experience

Fluent IN ENGLISH.

Company offers comprehensive package : including major medical, 401K, Generous car allowance, Manager Bonus Incentive Program.
 
Job Number: 158476
Job Location: San Francisco, CA
Rate: $62 to $67.00 DOE
Duration: Perm
Input Date: 10/07/2016
Firm Name: CHIPTON ROSS
Attention: Lisa Roll
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lroll@chiptonross.com
Website: www.chiptonross.com

Business Development Manager

Description:
•Develop and execute the Sales Plan to meet performance expectations and requirements. The Sales Plan will primarily consist of fabrication sales (vessels, tanks, heat exchangers, and piping), but will also include selling Engineering, Construction, and Plant Maintenance Services.
80% of the effort will be related to New Fabrication Sales. 20% will be related to expanding existing Sales.
•Assist in preparing Quotes and getting feedback on quotes.
•Prepare sales presentations to explain company services during sales visits with potential or existing clients.
•Build relationships with key customers to enhance long-term business prospects through various mediums i.e. keeping-in-touch calls, emails, direct meetings and travel.
•Canvas the market to gain insight and adjust to the ever-changing competitive situation.
•Assist team to develop a coordinated sales effort while keeping management informed on the status of prospects and quotes.
•Obtain ongoing training on both functional and technical skills.
•Must be able to effectively communicate, both verbally and in writing, to all levels of the organization and with Clients.
•Must maintain a professional and business like demeanor at all times.
•Attendance is a requirement in order to meet the business demands relating to internal and external appointments.
BASIC QUALIFICATIONS :
•Minimum 3-10 years’ experience in the mechanical fabrication industry.
•Possess and maintain a valid and unrestricted driver’s license
•Business Development experience
•Must be authorized to work in the US without company sponsorship
•Willing to travel up to 75% of the time calling on current and potential clients. Nation Wide Travel Required

Required experience:
Business Development: 5 years
ASME Code Pressure Vessel Fabrication: 3-5 years
Pipe Fabrication Industry: 3-5 years

PREFERRED QUALIFICATIONS:
Knowledge of Tank, Vessel, and Pipe shop fabrication
•Knowledge of ASME Section VIII pressure vessel fabrication, ASME 31.1 & 31.3 pipe fabrication and AWS Structural Steel Fabrication preferred.

POSITION CRITERIA:
•Ability to respond to a variety of challenging circumstances while continuing to demonstrate superior selling skills focused on key Client needs and our services.
•Ability to provide technical solutions built around customer needs.
•Skilled in time management and follow-up contact, with potential clients and existing clients.
•Skilled in sales and business development negotiating skills while understanding and using techniques needed to close orders.
•Skilled in preparing and presenting sales proposals that address/meet customer expectations.
•Robust presentation, training and communications skills.
•Strong work ethic, communications skills, competitiveness.
 
 
Job Number: 1610060694
Job Location: De Pere, WI
Duration: 6 months
Input Date: 12/02/2016
Firm Name: PDS TECHNICAL SERVICES
Attention: Sue Van Pay
Address: 110 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 920/499-9943
800 Phone: 800/333-1389
Fax Phone: 920/499-9067
Email: cecjgreenbay@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002FxCk&URLSource=cjhunter

Buyer Associate

Description:
PDS Tech, Inc. is seeking a Buyer Associate for an open position in Windsor Locks, CT.
  • This position will support the Space Systems Windsor Locks procurement group.
  • This group is responsible for the procurement of a variety of material including: machined parts, electronic parts and assemblies, and major subcontract/engineered items (i.e., supplier designed valves, motors, sensors, etc...).
  • All procurements are done on a spot-buy basis (no LTAs).
  • The selected candidate will support all phases of the procurement process from source selection and negotiations to post-award administration.
  • Other duties may include, but are not limited to: performing various reviews/audits at a supplier's facility, negotiating terms and conditions of purchase with the assistance of company Counsel, coordinating the resolution of supplier issues, reviewing and understanding supplier-generated program schedules, expediting orders to ensure on-time delivery of hardware and other deliverables, and the completion of ad hoc reports for management.

  • The ideal candidate will have 2+ years of procurement experience of the commodities noted above preferably in support of U.S. Government contracts and/or within the aerospace industry. A general; knowledge of FAR, DFAR, NFS and Export Control (ITAR & EAR) requirements is preferred.
  • The ability to read and understand blueprints and other technical data is highly desirable.

 
Job Number: 1610061297
Job Location: Windsor Locks, CT
Duration: 12 months
Input Date: 12/15/2016
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002G1Va&URLSource=cjhunter

Buyer/Planner

Description:
PDS Tech is seeking a Materials Planner in Boilingbrook, IL.
Key Responsibilities:
• Will be working with Suppliers 

• Processing POs and following up on them 

• Having Excel experience is KEY for this position 

• Using AS400, having is a plus, but will be taught 

• Working in a Light Industrial Warehouse/distribution environment, so having this is very helpful for this role 

• Managing Supplier delivery 

• Supporting Factory On-Time-Delivery 

• A plus to have Lean Manufacturing or Lean Supply Chain 

• Handling invoicing discrepancies with Suppliers 

• Scheduling production, looking at system (CMS-AS400) and what net requirements are. and creating Work Orders 

 
Job Number: 1710065392
Job Location: Bolingbrook, IL
Duration: 6 months
Input Date: 03/16/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Lea Salmo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000021X63&URLSource=cjhunter

CADD Designer/Technician II

Description:
PDS Tech, Inc. is seeking a CADD Designer/Technician II for our client in Fort Worth, TX.  
Please contact Lyle Brown @ 512-343-1519 or email resumes to lbrown@pdstech.com for immediate consideration.

The CAD designer works as an independent contractor in conjunction with the Conveyance Team to prepare preliminary designs using engineering design concepts and design software. This person must have exceptional time management skills, be detail oriented, and have a solid understanding of design software standards.

Essential Functions

• Drafts detailed drawings of pipeline plan and profile sheets, plots maps and charts showing profiles and cross-sections, indicating relation of topographical contours and elevations to buildings, retaining walls, tunnels, overhead power lines, and other structures from engineer markups and sketches.
• Work to provide drawings, figures, exhibits, etc. as required to meet the team needs.
• Work closely with all team members to ensure that the drawings convey the correct information, to obtain information or ensure drawing clarity.
• Self-check own work for completeness, accuracy, meeting standards, fits and stack-ups.
• Must have a good working knowledge of geometry, mathematics and trigonometry to base work upon.
• Thorough knowledge of the standard terminology, techniques and practices of engineering drafting.
• Must be able to modify existing drawings to minimize the need to create new drawings and create new drawings when necessary in a timely fashion, which meet internal standards.
• Able to take layouts from engineers and provide construction sheets detailing the facility
• Able to contribute in design reviews and improve job efficiencies.
• Computer literacy in the company’s software.
• CAD system proficiency.
• Working knowledge of general construction techniques and the role of the drawings in the construction project.
• Ability to understand and follow oral and written instructions and sketches.
• Ability to serve as lead technician to coordinate project drafting.
• Must maintain an awareness of and regularly work within established schedules and budgets.

Competencies
• Working knowledge of AutoCAD, Microstation preferred.
• Working knowledge of AutoCAD infrastructure (common name Civil 3D).

Personal Qualities
Independent, detail oriented, self-directed worker; knows when to stop and ask questions; organized and able to prioritize multiple tasks; desire to continue learning; enjoys researching and solving complex problems. Fits in company culture of integrity, kindness, service and excellence.

Supervisory Responsibility
This position has no direct supervisory responsibilities.

Work Environment
Candidates should be prepared to serve in a traditional professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. 
Physical/Mental Demands
Physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.  While performing the duties of this job, the employee is regularly required to talk or hear.

Mental demands typically include time management, conflict resolution, excellent communication and organizational skills. Must be able to manage fast paced project environment with multiple deadlines. 

Position Type/Expected Hours of Work
This is a temporary, contract position that is not expected to last three to six months. Days and hours of work are Monday through Friday, 8:00 a.m. to 5 p.m. Occasional longer hours may be required as job duties demand, including evenings and/or weekend work.

Travel
Travel is not expected for this position's essential job duties.

Required Education and Experience
• Minimum Experience:  5 years of Water or Wastewater or Gas Utility Experience including Pump Station
• Knowledge and Practical Use of AutoCAD 2011 or newer.  Minimum 5 years’ experience with AutoCAD.
• Knowledge and Practical Use of AutoCAD Infrastructure (common name Civil 3D).  Minimum 2 years’ experience with Civil 3D

Update on 6/28: MIcrostation is not a must have. 
Clete Martin (Hiring Mgr)


Preferred Education and Experience
AutoCAD Certified, Associates or Bachelor's degree.

Additional Eligibility Qualifications
1. Must have a valid Driver's License.
2. Must be able to read, write and speak English at a professional level.

Work Authorizations/Security Clearance
Must be able to legally work in the United States without sponsorship.

AAP/EEO Statement
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected veteran status.

Other Duties
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job.  Duties, responsibilities and activities may change at any time with or without notice.


 
 
Job Number: 1710069588
Job Location: Fort Worth, TX
Duration: 1 months
Input Date: 06/19/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Lyle Brown
Address: 12708 RIATA VISTA CIR STE A-108
City, State: AUSTIN, TX 78727
Phone: 512/343-0303
800 Phone: 800/917-2841
Email: cecjaustin@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002Cmgk&URLSource=cjhunter

CMM Inspector - CA

Description:
Chipton-Ross is seeking a CMM Inspector for an opening in Chatsworth, CA.

RESPONSIBILITIES:
Verification of product conformance to established Company and Customer requirements including manufacturing plans, internal audits, policies, procedures, work instructions, quality records, specifications, drawings, mylars, acceptance gages and tooling, etc.

The CMM Inspector provides the technical interface between the programming and operations organizations as it relates to conformance of product produced with digital data.

- Coordinate CMM programming requirements with CMM Programmer.
- Provide technical support to operations pertinent to compliance with engineering requirements.
-Interact with customer representative on any and all issues pertaining to the CMM Inspection Process. (i.e. Digital Data, Contractual requirements for deliverable data, etc. as delegated by the Supervisor/Leadman)
- Interact with Engineering, Manufacturing and Production control Management in the execution of process flow through the CMM.
- Identify software/hardware issues that may have detrimental effects on the CMM process.
- Undertake Continual Improvement Projects as defined and as assigned by the Director of Quality Assurance/QA Supervisor or Leadman.
- Support process changes as a result of continual improvement efforts.
- Perform Critical Inspection Analysis in support of Root Cause Analysis process for all customer complaints and customer returns affecting the CMM process.
- Assist in the development of Quality Management System Policies and the generation of the associated procedures and work/form instructions for the Quality Assurance Procedures pertinent to the CMM process.
- Participate in decision-making process in conjunction with Quality Assurance Management/Engineering/Manufacturing personnel on day-to-day issues relative to the determination of product/process acceptance criteria.
-Other duties may be assigned.

REQUIRED EXPERIENCE:
- AA degree (or equivalent experience) in related discipline and 5-10 years of equivalent experience within a manufacturing environment in the aerospace industry at a technical capacity.
- Must have the ability to handle multiple projects simultaneously, organizing assigned work effectively, and forecasting potential problems.
- Must have a strong understanding of aerospace technical issues.
- Must be well organized and meet deadlines.
- Must have excellent communication skills both written and oral.

EDUCATION:
High School Diploma

WORK HOURS:
THIRD SHIFT
 
Job Number: 159079
Job Location: Chatsworth, CA
Rate: $56000 to $64000.00 DOE
Duration: PERM
Input Date: 07/26/2016
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

CNC Machinist

Description:
CNC Machinists/Programmers - 5 Axis
Wheeling, IL

Contract to Hire

Must be familiar with Fanuc controls. Seeking Aerospace Industry experience.

MUST be willing and able to work this shift: 6PM-6AM (4 days on, 3 days off, 3 days on, 4 days off)

Our client is looking for operators, machinists and programmers available for basic setup through complete processing of advanced components for CNC turning/CNC milling machines - utilizing metal machining knowledge to set-up and develop machine processes as well as operate a variety of CNC machines to produce high-precision machined parts.


Positions involve:

Accurate record keeping.
Able to read and interpret drawings and work instructions.
Proper inspection of first-run and in-process parts.
Safe operation of CNC machinery.
Ability to set-up and machine components.
Ability to create and edit programs on Mastercam and Unigraphics NX software.
Ability to keep a safe and clean working environment.

Requirements:

2.5-5 years experience in programming, editing, set-ups and operating of CNC machines for precision parts.
Read and understand GCode/measuring equipment.
Interpret drawings with complex GD&T symbols.
Manual agility.
Experience with:
CNC mills - 3 to 5 axis.
CNC lathes with live tooling.
Fanuc and/or Heidenhain controls.
For Programmers:
Mastercam programming and/or Unigraphics NX software experience.
Experience with limited dimension drawings and solid models
 
Job Number: 51271
Job Location: Wheeling, IL
Duration: LT
Start Date: ASAP
Input Date: 06/09/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Email: lleszek@butler.com
Website: www.butler.com

Cert Project Specialist I

Description:
Unique Skills:

Previous experience supporting FAA/Gulfstream ODA certification projects. (For example STC/MRA/TC projects)

Position Purpose:

Under general supervision, performs a variety of engineering tasks associated with ODA (Organization Delegation Authorization), FAA (Federal Aviation Administration), EASA (European Aviation Safety Agency) and/or other FCAA (Foreign Civil Aviation Authorities) certification projects. Primary responsibilities include the gathering, organizing, generating, reviewing and processing of engineering documentation associated with MRA (Major Repairs and Alterations), STC (Supplemental Type Certificate), Type Certificate (TC) and/or other regulatory approvals projects.

Principal Duties and Responsibilities:

Essential Functions: 1. Reviews STC/TC/MRA data packages prior to submission to the FAA for completeness and adherence to the established requirements. Makes recommendations to ensure STC/TC/MRA documentation is prepared in accordance with approved procedures. 2. Gathers, organizes, and processes engineering documentation related to STC/TC/MRA projects. 3. Exercises creativity and initiative in processing, handling, and distributing engineering documentation to both internal and external organizations. 4. Participates on work teams to achieve department goals, complete milestones and improve processes. 5. Tracks STC/TC/MRA projects to ensure completion within the required timeframe. 6. Assists FAA Designees in STC/TC/MRA project development, as described by Gulfstream ODA Operations Manual procedures. 7. Develops and broadens skills for competency enhancement and career progression.

Additional Functions: 1. Performs other duties as assigned. 2. Minimum travel required.

Other Requirements: 1. Good working knowledge of MS Office software. 2. Must be familiar with Federal Aviation Administration (FAA) certification processes. 3. Must be familiar with Federal Aviation Regulations (14 CFR Part 21, 23, 25, 43, 91, 135 and 183) and associated guidance material. 4. Must possess excellent attention to detail and display the ability to effectively adjust to changing engineering practices and procedures. 5. Must have excellent organizational and planning skills.
 
Job Number: 17-680-100081
Job Location: Southeast
Rate: $61.00 to $68.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/13/2017
Firm Name: AGENTE TECHNICAL
Attention: Alrxa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Email: abui@agentetech.com
Website: www.agentetech.com

Project/Change Management

Description:
Change/Project Management - #1 rated company to work in St. Louis, MO. (Downtown area). 
Must have experience with the following:

Risk Analysis /Manufacturing Processes/Business Analyst

**Prefer Industrial Engineering Degree 
  • Experience and knowledge of change management principles and methodologies
  • Familiarity with project management approaches, tools and phases of the project lifecycle
  • Familiarity of manufacturing processes
  • Up to 60% travel required
  • The position will play a key role in helping capital projects meet business, schedule and budget objectives.  This position will focus on the operational, non-construction elements of a project, including methods, materials, man and machine.


 
Job Number: 1710069120
Job Location: Saint Louis, MO
Duration: 12 months
Input Date: 06/07/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002K1QQ&URLSource=cjhunter

Chief Aviation Inspectors - Elk Grove Village, IL

Description:
STS AeroStaff Services is currently hiring Chief Aviation Inspectors for open positions in Elk Grove Village, Illinois.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Purpose:

To ensure the repair stations operations are conducted in accordance with the pertinent FAA Regulations, client’s Quality Manual/Procedures, Customer Air Carrier Requirements and is designated with final airworthiness determination.

Job Duties:

• The Chief Inspector will have the final airworthiness authority for the release, as airworthy, of the units the repair station is rated to repair and maintain
• Responsible for ensuring all articles delivered to and maintained by the repair station are properly recorded and staged from receipt to delivery in their airworthy/serviceable condition
• Managing and delegating to the repair stations inspection staff ensuring the quality and production needs are maintained
• Perform, and have oversight of inspection personnel/activity, including Preliminary, Hidden Damage, In-Progress and Final inspections/RTS of aircraft articles processed by the Repair Station and assuring proper recording of results
• Ensure compliance with pertinent FAA regulations, manufacturer’s technical data/approved supplements, RSM/QCM and customer requirements
• Report all quality related issues to the QA Manager as soon as the Facility Manager is advised and ensure corrective actions are implemented
• Confirm that all equipment being maintained by the repair station is on the Capabilities List, the proper data is available and in use, the staff is properly trained and all records of work/release are complete/accurate
• Perform duties delegated by Quality Assurance Manager
• Directly responsible for the compliance with the FAA Approved training program manual; including indoctrination, initial, recurrent, ongoing, semi-annual, and specialized training
• Ensure any applicable Airworthiness Directive are posted and are being used and verify compliance with all other supplements, approvals, requirements
• Submit reports of defect or un-airworthy condition to the “Service Difficulty Reports”
• Assume all duties and responsibilities detailed in the RSQCM to include; calibration program, shelf life program, internal auditing, BER/scrap, work turn over, suspected unapproved parts, salvage parts program and incoming goods
• Performing semi-annual internal audit of the repair station and any approved contractors
• Coordinate with station manager inspection requirements
• Ensure and assist in all areas of the Safety Program and Zero Harm Program to ensure that they are fully enforced and by all client employees
• Provide feedback/suggestion to improve customer satisfaction
• Communicate with customers and regulatory agencies during audits or visits
• Ensure system security of our FAA approved electronic recordkeeping system regarding their area/s of responsibility
• Maintain safe and clean work environment
• Overseeing the quality of products in accordance with monthly budgeted production goals
• Maintaining quality standard in accordance with the regulations, customer requirements and internal procedure
• Establishing a quality and compliance system which will result in no major audit finding;
• Equipment rejection rates shall be at 98% or higher
• Maintaining positive MTTR
• Contributing to positive MOP by controlling wastes
• Enforcing the client Zero Harm Culture and goals

Qualifications:

• 2+ years’ experience as a lead inspector or manager in related aviation field
• 5 years’ aviation related industry experience
• Confident personality with the ability to interface/communicate with the authorities and customers
• Experience in performing Audits
• Strong knowledge of FAA regulations and Part 145 requirements
• Competent in reading and interpreting manuals, drawings, policies
• Good communication and punctuation skills
• Computer literacy and familiar with Microsoft office
• Ability to learn new software programs and systems
• Appropriately certificated under Part 65 (A&P or FAA Repairman)
• Ability to work in a high activity/fast paced environment while managing associated stress
• Possesses excellent organizational skills and ability to work independently
• Organize responsibilities of the inspection staff and delegate duties to properly qualified inspection personnel
• Effectively execute training in accordance with the Approved Training Program and internal requirements
• Ability to make quality decisions and effectively solve problems
• Strong verbal and written communication skills, including the ability to facilitate meetings and effectively lead groups
• Ability to build and maintain effective working relationships with all levels of management and staff
• Ability to lift, pull, and push in excess of 65 lbs
• Must be able to read, write and understand the English language
• Part 65 A&P or Repairman Certificate

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38651
Job Location: Elk Grove Village, IL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 06/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Email: Resumes@STSEngineering.com
Website: www.stsaviationgroup.com

Civil/Industrial Openings

Description:
Hiring in multiple locations

Email your resume or apply online

Benefits Available
- long term contracts
- top per diem rates
- direct deposit
- referral bonuses
- 401(k) program
 
Input Date: 05/09/2017
Firm Name: NESC STAFFING
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
800 Phone: 800/562-3463
Email: lokeefe@nesc.com
Website: www.nesc.com

Commercial Avionics Systems Engineer

Description:
PDS Tech, Inc  is seeking a Commercial Avionics Systems Engineer for an open position in Trumbull, CT.
Seeking a candidate for a Commercial Avionics Systems Engineer to be an integral part of a small and fast-paced team supporting the engineering projects, product development, and test. 

Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes. 

Airframes may include, but are not limited to S-76, S-92 and their derivatives, including integration of new technologies into the S-92. 

Primary Responsibilities 
1. Development of requirements 
2. System Integration 
3. Generation of lab and aircraft test procedures 
4. Troubleshooting avionics issues on test, production and fielded aircraft 
5. Support program management reviews 
 
Beneficial Experience 

- FAA and foreign certification (preferred) 
- DO-178B, DO-160 and DO-254 processes (preferred) 
- Technical project management (preferred) 
- Supplier technical management (preferred) 
- Pilot or A&P experience (preferred) 

Educational Requirements: 
- BS Engineering in a related field w/7+ years relevant professional experience 
- Will consider non-degreed candidate's who have equivalent professional experience (11+ years) 
 
Job Number: 1710064302
Job Location: Trumbull, CT
Per Diem: No
Duration: 24 months
Input Date: 02/22/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002GM2s&URLSource=cjhunter

Component Product Engineer - Manufacturing / Aerospace

Description:
Major aerospace company has a 6 Month+ contract position open for a Component Product Engineer who has manufacturing experience in the aerospace industry.

Job Responsibilities:

-Work with manufacturing suppliers on fabrication of aerospace quality hardware.

-Work with the design, analysis, and operations teams.

-Work effectively with the technical, business and program office team members regarding technical issues and component status.

-Up to 25% travel required.

Skills:
Required:

-Experience working with manufacturing suppliers on fabrication of aerospace quality hardware.

-Experience working with the design, analysis, and operations team.

-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.

Desired:

-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.

-Rotating machinery experience is not required but is beneficial.


Keywords:

-Turbomachinery

-Rotating machinery

-Design

-Fabrication
 
Job Number: 12262
Job Location: Canoga Park, CA
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 6 Months+
Start Date: August
Input Date: 08/03/2017
Firm Name: LOGIN CONSULTING SERVICES
Attention: Tali Lerea
Address: 300 CONTINENTAL BLVD STE 530
City, State: EL SEGUNDO, CA 90245-5067
Phone: 310/607-9091
Fax Phone: 310/607-9818
Email: tali.lerea@loginconsult.com
Website: www.loginconsult.com

Components Engineer - Level 2

Description:
Components Engineer - Level 2

Location: Dallas, TX
Rate: $60.00 - $65.00/HR
1 year contract


** MUST have ability to obtain a Secret security clearance**

Description:
- Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements.
- Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components.
- Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records.
- Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.


Skill/Experience/Education
Mandatory:
- Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
- Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages.
- Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance.
- The candidate will periodically be required to make presentations to program management and customers.
- Must have parts management experience working with designers to select components for use in designs.
- Must have obsolescence experience working with component lists and industry tools to evaluate part availability and determining path forward when issues are identified.
- Must have ability to obtain a Secret security clearance.


Desired:
- Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies.
- Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.
 
Job Number: 7156
Job Location: Dallas, TX
Rate: $60.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 03/06/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Components Engineer - Level 2 / Obsolescence / Parts Management / Must have ability to obtain a Secret security clearance TX

Description:
159492
MFC-1334
Components Engineer - Level 2
Dallas, TX
65/hr max
12 month contract
No Clearance

Description
Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.
Skill/Experience/Education
Mandatory:

Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers. Must have ability to obtain a Secret security clearance.
Desired:

Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies. Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Parts Management Working with designers to select components for use in designs. 0-3 Years Yes
Obsolescence Work with component lists and industry tools to evaluate part availability and determining path forward when issues are identified. 0-3 Years Yes
 
Job Number: JE-1334
Job Location: Dallas, TX
Rate: 65/hr max
Duration: 12 month contract
Input Date: 07/31/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Computing Security & Information Protection Specialist, Berkeley, MO 63134

Description:
PDS is seeking a Computing Security & Information Protection Specialist for an open position in Berkeley, MO 63134.  
In your role you will:
  • Evaluates, communicates and mitigates computing and information security risks.
  • Ensures that appropriate processes are in place and followed so that systems are compliant with applicable requirements.
  • Participates in compliance audits and assessments. Analyzes security events and records to determine if security incidents have occurred.
  • Provides consultation on security issues.
  • Develops policies and provides oversight for protection of computing security systems. U
  • ses advanced investigative knowledge to assist in investigations. Participates in and/or leads incident response teams.
  • Participates in and/or leads the development of information security training materials and processes.
  • Provides compliance and audit support.
  • This job requires interfacing with the appropriate government customers, suppliers, and company personnel to implement protective mechanisms and to ensure understanding of and compliance with government and company computing security requirements.
  • The candidate will be responsible to ensure that customer needs are effectively promoted in policy and security standards.

Education:
Technical bachelor’s degree and typically 5 or more years’ related work experience or a Master’s degree with typically 3 or more years’ or a PhD degree or an equivalent combination of education and experience. A technical degree is defined as any four year degree, or greater, in a mathematic, scientific or information technology field of study.
Experience:
  • With minimum supervision, the candidate must be able to perform security analysis of operational environments, threats, vulnerabilities and internal interfaces to define and assess compliance to accepted industry and government standards.
  • Configure various operating systems such as Windows, Linux, and Solaris to meet Joint Special Access Program Implementation Guide (JSIG), Joint Air Force Army& Navy 6/3 (JAFAN 6/3), ICD 503 and National Industrial Security Program Operating Manual (NISPOM) standards.
  • Develop certification and accreditation (C&A) documentation for new and existing systems; perform risk managed file extractions in accordance with customer guidance.
  • Review weekly audit logs and investigate any anomalies for UNIX, Linux and Windows systems.
  • Analyze new technologies, both hardware and software, to determine security vulnerabilities and mitigations.
  • The candidate will also be required to train general and privileged users in computing security processes, policies and procedures.
  • This job will require documenting and presenting for approval Information System Security Plans, Concept of Operations (CONOPS,) and other written documentation as required by JSIG, JAFAN 6/3, NISPOM, ICD 503 and other customer direction.

 
 
 




 
 


 
 
Job Number: 1610047223
Job Location: Saint Louis, MO
Per Diem: No
Duration: 6 months
Input Date: 06/14/2016
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000026Cp8&URLSource=cjhunter

Contract - Simulation & Software Engineering Contractor

Description:
Unique Skills:
1. Matlab/Simulink experience modeling real time aircraft systems 2. Aerospace background with avionics lab testing experience 3. Ability to understand aircraft electrical wiring diagrams as it relates to HIL simulation 4. Experience with high level programming or scripting language such as C/C++, Python 5. Knowledge of data protocols used in aerospace 6. Experience modeling aircraft systems in real time on industry standard simulation platforms (eg NI, Speedgoat, Dspace,ADI) 7. Flight and/or aircraft system lab HIL simulation experience 8. Ability to work independently and self-govern priorities in accordance with lab customer needs ob Description Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 92762
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 06/09/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: SUITE 200
5051 PEACHTREE CORNERS CIR

City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Email: recruiter@intergengroup.com
Website: www.intergengroup.com

Contract Senior / Design Engineer

Description:
RESPONSIBILITIES
Creates basic designs of aircraft interiors, structures and mechanical systems for Fit, Form and Function to meet customer criteria, quality standards, FAA requirements, budget and project schedules using Computer Aided Drafting/Design tools.
• Designs and checks aircraft interior furnishing and/or structures.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.

TARGET QUALIFICATIONS
• Bachelor's degree (B.S.) in engineering, minimum of 5 years relevant experience, or equivalent combination of education and experience. Aviation background and aircraft interior experience preferred.
• Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

IN-DEPTH KNOWLEDGE, SKILLS, AND ABILITIES
• Ability to design and check interior engineering drawings for Fit, Form and Function.
• Strong Computer Aided Drafting/Design skills using AutoCAD and/or Inventor.
• Three dimensional (3D) design/drafting skills are preferred.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally as part of an established and growing team.
 
Job Number: 17-712
Job Location: Northwest
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 09/11/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Email: abui@agentetech.com
Website: www.agentetech.com

Contracts Administrator

Description:
PDS Tech, Inc. is seeking a Contract Administrator for an open position in Windsor locks, CT.
Job Description:  

  • The Electric, Environmental & Engine Systems (EEES) business unit – provides products for military and commercial airframe and industrial markets.
  • The military contracts group supporting the Airframe Systems & Components (ASC) division of Global Engines, Airframes and Industrials (GEAI) has an immediate opening for a Contracts Administrator based in Windsor Locks, CT. 
  • Successful candidate will be responsible for performing contract administration duties associated with government and military indirect and international customers.
  • Aspects of contract administration support include, but not limited to: proposal development, review and negotiation of contract terms and conditions, drafting of contract documents (including Non-Disclosure Agreements, Memorandum of Agreements, and Technical Assistance Agreements), order reviews and purchase order acknowledgments, flow down of contract requirements and amendments to internal customers, change management, identification of contract and business risk, accounts receivable support/reporting, audit support, and contract close out. 

Experience/Skills:
  • 0-2 years of experience in contract administration, with exposure to both US Government and commercial type contracts.
  • Successful candidate will be a self-starter, an effective communicator, and possess strong analytical and problem-solving skills; successful candidate must be organized and detail-oriented, as well as be able to communicate and work effectively to support internal and external customers in a very fast-paced dynamic environment.
  • Microsoft Office Skills is required. 


Education:

  • BA/BS required.

 
Job Number: 1710062427
Job Location: Windsor Locks, CT
Duration: 22 months
Input Date: 01/17/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002G7ra&URLSource=cjhunter

Contracts Manager-Military

Description:
The Contracts Manager will serve as a subject matter expert for Military Manufacturing contract matters. The Contract Manager reviews, prepares, and negotiates documents necessary to protect the company's contractual posture with adherence to company policy and applicable laws and regulations; performs general contract management and administration responsibilities; provides interpretation of terms and conditions and advises management of contractual rights and obligations; and consults with the legal and other departments as needed to ensure the company has preserved its rights, while limiting its liabilities.

Detailed Description:
Perform functions necessary for all phases of Military contract’s and subcontract management from cradle to grave, including but not limited to proposal/bid/business development support, contract/subcontract formation, pre- and post-award protest, negotiation, cost and price analysis, contract execution, administration, change order management, reporting, termination, and closeout. Identify and mitigate risks connected with non-standard conditions and other party changes in proposed contractual documents.
Monitor and track contract performance (contract schedules, deliverables, funding, invoicing, and payments) and proactively identify and address potential risk areas or other problems that could have an adverse impact on the company. Participate in program reviews and contracts-related meetings with internal and/or external customers. Develop and maintain positive customer relationships, both internally and externally, and support the generation of additional or new business opportunities. Ensure that contracts, subcontracts, and other agreements are managed in accordance with company policies and procedures, applicable laws and regulations, and customer requirements. Review and prepare various business agreements, documentation, correspondence, forms, and reports which may be required to support business development activities, solicitations, contract awards, subcontract awards, and related activities. Maintain contract files and records, manage archive records, and maintain contract information in various databases and ERP system. Participate in the resolution of contract disputes, audits, and other post-award contract matters; and perform other duties as assigned by management.
Requirements:
BA/BS degree required, MBA, or related field with 5+ years of experience in Contract Management & Negotiation in the high-technology, government / military commercial and international industries. Expert level knowledge of MIL / NAVSEA / ITAR and contract principles specific to the award and management of commercial contracts. Must have U.S. Citizenship. Ability to communicate effectively and must have strong written and verbal communication skills. Strong organizational skills and ability to review and manage voluminous contract files, correspondence, and maintain information in electronic databases. Strong time management skills with ability to work well under pressure, multi-task, and handle multiple priorities. Self-motivated and good level of focus/concentration with ability to prioritize, follow-through, and complete tasks on time. Ability to exercise good judgment and handle confidential and sensitive issues. Detail oriented with high level of accuracy. Excellent analytical and problem-solving skills. Ability to work independently and as part of a team. Strong computer skills with advanced working knowledge of Microsoft Word, Excel, and PowerPoint. Some limited travel may be required to support business development and contracting activities.
 
Job Number: 1710067965
Job Location: De Pere, WI
Duration: 6 months
Input Date: 05/09/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Sue Van Pay
Address: 110 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 920/499-9943
800 Phone: 800/333-1389
Fax Phone: 920/499-9067
Email: cecjgreenbay@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000012Zdk&URLSource=cjhunter

Control Laws Engineer - Flight Dynamics Group

Description:
This position is located in Nagoya, Japan. However, the job may involve international travel. Deployment for extended periods to USA to support Flight Tests may be necessary.

PDS Tech is seeking a Control Laws Engineer for the Flight Dynamics Group, Regional Jet Development Project.

The professional will work as part of the Control Laws team and the main scope of the work is to provide specialized technical assistance to the team regarding Control Laws Design, Verification and Certification.



This will include Control Law design and analysis tasks, support to piloted simulation/evaluation and flight testing, including data analysis/synthesis and problem reporting/resolution. Validation and verification activities may form a significant part of the assigned tasks, including desktop, rig and aircraft level analysis and testing with production of appropriate documentation to support Certification.



Use and development of simulation models, tools and environments will be a regular feature of the work.



If requested, the specialist will also work on other activities related to Control Laws, such as Failure Analysis, Flight Control System integration, ASE and interfacing to other teams.

Basic work scope is to provide technical assistance to the development and certification of the Regional Jet Program, focusing primarily on Control Laws Design, evaluation, verification and optimization.



  1. This activity includes:
    1. Control Law design, including gain tuning, stability and handling qualities analysis.
    2. Planning, preparing, executing, analysing and documenting Desktop Simulations
    3. Planning, preparing, supporting, analysing and documenting Manned simulations
    4. Planning, preparing supporting, analysing and documenting Flight Test activities
    5. Support to problem report resolution, including interaction with the pilot community.
    6. Validation and Verification work and associated documentation
    7. Support to tools, methods and analysis environment development
    8. Analysis of identified Failure cases and support to associated HQRM analysis and test activities
    9. Support to integration activities with other areas of organization including Flight Control Systems, Aeroelastics, Loads
    10. Preparation of documentation to support Certification and, if requested, coordination with authorities (JCAB, EASA, FAA)


  • 5+ years of Aerospace Industry experience.
  • At least 3 years of Control Laws experience with OEM, preferably on a Civil Aircraft project
  • Good knowledge of Flight Dynamics and computer simulation/modelling required
  • Recent experience of piloted assessment of Control Laws including planning, preparing and analysing simulator, rig and Flight test results.
  • Experience of direct support to Flight testing including TM work is advantageous
  • Knowledge of Part 25 rules and guidance material for Certification
  • Knowledge/Experience on analysis of failure cases is advantageous
  • Experience in design, qualification and certification of civil aircraft equipped with FbW is advantageous
  • Ability to use and/or develop analysis tools to support Control Laws Design and Verification tasks
  • Knowledge of Flight Control Systems design, ASE and/or Loads analysis is advantageous
  • Good MATLAB/Simulink skills and experience essential
  • Good programming skills, including in ‘C’ are highly advantageous
  • Good team working and interpersonal skills
  • Good English language skills
  • Japanese language skills are advantageous

 
Job Number: 1610057891
Job Location: Nagoya,
Duration: 36 months
Input Date: 01/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Jordan
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002FhuC&URLSource=cjhunter

Crew Station Design

Description:
PDS Tech is seeking a Crew Station Design for an open position in Shelton, CT.

Responsibilities to Include:Develop and design menus, logic and display graphics in a multifunction glass cockpit Pilot Vehicle Interface (PVI) or coordinate design activities of suppliers. Assume responsibility for PVI designs and coordinate with people of various disciplines in an Integrated Product Team environment that requires flexibility and diplomacy. Coordinate evaluation of designs in simulation, take ownership of design approval, and produce configuration-managed specification documents for software requirements developers. Support hot bench, ground, and flight testing of finished product. Secondary duties may include design and development of air vehicle Crew Station Geometry and layout of controls and displays to accommodate full anthropometric range of expected users. Evaluate Crew Station Design and layout in physical and/or electronic mockups, simulations and air vehicles
 
Required:
- MS/MA in Human Factors, Experimental Psychology, or related degree
- (BS Industrial Design, Industrial Engineering or equivalent with Human Factors coursework will be considered)
- Experience with Part Mission or Full Mission simulation of Pilot Vehicle Interface designs
- Rapid Prototyping tools such as VAPS® or equivalent
- Basic Office and database management software (word processing, Power Point, Excel, drawing tools, etc)
- Excellent communication, writing and presentation skills
 
Desirable:
- Experience in military aviation (helicopters in particular).
- Rational ClearCase, or equivalent configuration management tool.
- Experience with Human Modeling tools such as Jack® or equivalent.
- Experience with 3D modeling tools such as CATIA®, ProEngineer® or equivalent
 
 
Job Number: 1610058626
Job Location: Shelton, CT
Per Diem: No
Duration: 24 months
Input Date: 10/19/2016
Firm Name: PDS TECHNICAL SERVICES
Attention: Ryan Bushey
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002Fkh2&URLSource=cjhunter

Customer Relations Specialist

Description:
Customer Relations Specialist

Location: Ridley Park, PA
Duration: 3 Months

Description:
The Global Sales & Marketing Customer Engagement (CE) function is responsible for delivering unparalleled customer experiences that strengthen relationships, enhance business growth and advance the global brand of The client Company.
As a member of the BDS Customer Engagement team, you will provide leadership and support in strategic event planning and marketing support to various BDS programs, both domestic and international. The position is focused on providing support to the client Military Aircraft (BMA) and Vertical Lift business units of BDS as well as to research-and-development programs and site, community, local government, and supplier activities.

Candidate will report to the Manager-Customer Engagement for client Defense, Space, and Security located in St. Louis, MO. The role requires the planning, coordination and execution of complex customer visits, special events, conferences, product demonstrations, site tours, and sponsored functions for U.S. Department of Defense and international customers, as well as senior client and industry partner executives.

Candidate will be required to lead or assist with customer engagements, manage vendors, prepare and deliver executive event briefs, and assess event effectiveness at the local client site and other venues. The job entails the use of event planning and project management skills, marketing tactics, clear understanding of customer requirements, a substantial working knowledge of U.S. and foreign government regulations, familiarity with international cultures and customs, and strict adherence to company guidelines, policies, and procedures. You will continuously collect, integrate and disseminate information to all stakeholders to ensure execution to the plan. In addition, you will utilize event management tools and data to capture and closeout event reports.

Demonstrated leadership, event project management, strategy, marketing, communications and teambuilding skills are key to this role. Other essential skills and competencies are business knowledge, flexibility, attention to detail, decisiveness, forward thinking and a positive approach to change and innovation. The role requires the ability to manage multiple projects simultaneously with minimal supervision, meet deadlines and event budget targets, create and maintain effective working relationships and customer partnerships.

Education / Experience:
Bachelor's and typically 6 or more years' related work experience, a Master's degree and typically 4 or more years' related work experience or an equivalent combination of education and experience.

Skill Code:
K03-Customer Relations Mgt
Category Name Required

Areas of Expertise Project Management Yes


Soft Skills Oral and Written Communication Skills Yes


Software Skills MS Office Yes
 
Job Number: 17-10132
Job Location: Ridley Park, PA
Per Diem: possible
Overtime: possible
Duration: 3-6 mos
Start Date: 6/23/17
Input Date: 06/15/2017
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 312/502-4795
Email: constance@iconma.com
Website: www.iconma.com

Customer Service Assistant

Description:
PDS Tech is seeking a Customer Service Assistant for an open position in Nebraska City, NE
Essential Duties and Responsibilities:

Works closely with the District Sales Manager while acting as the main point of contact for customer issues pertaining to products and services. 

 The CAR manages the OTC process by reviewing each Customer PO/contract, validating pricing, working with and assisting with resolving AR issues when appropriate. 

 Review, process and manage Customer complaints/returns within prescribed timescales in the QM module as documented in the RMA guidelines for successful outcome and feedback both internally and externally. 

 Establish and maintain effective and efficient utilization of records and files necessary in providing timely and satisfactory service to Customers. 

 Prepares, generates, and distributes daily reports (as required) and order acknowledgements to appropriate personnel. 

 Understand product specifications and relay them accurately to both internal and external Customers. 

 Understand and retain all processes and procedures of the CAR function. CAR’s are required to take an active role in process development and continuous improvement. 

 Participate in training sessions, meetings, skill building and professional development classes. 

 Contributes to the development and maintenance of standards, policies, and procedures. 

 Responsible for actively ensuring the retention of the organization’s customer base which includes promoting the organizations existing customers. 

 Provides back-up support to other group members in the performance of job duties as required. 

 Supports/participates in the organization’s Continuous Improvement Program. 

 Liaise with Sales, Operations and Materials Management to ensure all activities related to material or product deliveries are communicated for inclusion within the production capacity planning program, and all delivery issues are escalated appropriately. 

 Responsible for the completion of ‘order management’ on all accounts to ensure prompt order processing with high levels of accuracy; including verification of product configuration from customer.

 Monitor and maintain all credit and debits for customer accounts. 

 Act as first point of contact for Customer and vendor inquiries. 

 Prepare documentation for pricing committee for bids and quotes. 

 Maintain and continuously improve upon all work procedures in support of Company and Departmental standards and procedures. 

 Use judgment appropriately to escalate all issues concerning the department or employee concerns. 
Qualifications or Functional Experience: 

A university degree in business studies, marketing or equivalent is preferred; or at least 5 years’ experience in customer service within a manufacturing or industrial setting. 

 Alternatively, the equivalent combination of formal education and experience within a similar office environment will be considered. 

 Practical experience in formulating short and long term business plans concerning internal sales targets. 

 Bilingual ability of both the spoken and written word would be a candidate advantage. 

 A valid driver’s license is essential. 



System or Knowledge: 



This includes: 

 IT/Computer literacy – good knowledge and technical skills in Microsoft applications such as; PowerPoint, Excel, Word, Outlook and Project. 

 Knowledge and technical skills in the use of role related software; such as SAP. 

 One to three years product knowledge. Must possess strong technical aptitude.
 
Job Number: 1710064323
Job Location: NE City, NE
Duration: 9 months
Input Date: 02/23/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Israel Ireneo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002GM9W&URLSource=cjhunter

Data Integrity Technical Specialist I

Description:
Unique Skills:
Check 3D engineering data for conformance to Client requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Client requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas: • Accuracy and completeness of engineering product definition data, including CAD and PDM data. • Proper application and compliance with all Engineering and customer drawing requirements. • Use and understanding of GD & T a must. • Dimensioning and tolerancing including familiarity with ASME Y14.5. • Application of best drafting and design practices and procedures. • Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts. • Advise Design personnel regarding drawing and design practices and procedures. • Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams. • Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments. • Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements. • Knowledge of parts list & PdocM, a plus.

Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Client products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-684-98741
Job Location: Southeast
Rate: $50.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 08/08/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Email: abui@agentetech.com
Website: www.agentetech.com

Designer/Drafter 3

Description:
PDS Tech, Inc. is seeking a Designer/Drafter for an open position in NSacaramento, CA.
In your role you will:

  • Completes complex drawings to suit engineering changes and initiates engineering changes.
  • Completes the creation of complex design layout and detail drawings of complex products.
  • Performs compilation of materials and specification sheets.
  • Performs dimensions/specification determination necessary on complex drawings for effective manufacturing.
  • Performs the designs of cost-effective complex products with adherence to applicable industry and customer standards/specifications.
  • Completes complex investigations related to product design and maintenance.
  • Performs review of complex engineering drawings and supporting documents for adherence to drafting standards.
  • Completes planning test programs.
  • Selects material based on application; may coordinate procurement. 


 
Skills and requirements: 
  • PTC CREO Elements/Pro 5.0 
  • Pro Sheetmetal, Piping, Cabling, Surfacing 
  • Autocad 2010 
  • Experience designing sheet metal parts, structural weldments, Electro-Mechanical packaging, large and small welded and/or bolted assemblies, fiberglass and plastic parts 
  • Experience with corrosion protection (ie. Paint, Powder Coat, anodizing, zinc plating) 
  • Experience creating bill of materials, Engineering change procedure, technical writing skills, and creating work instructions 
  • Experience working in a manufacturing environment, interfacing with factory workers, purchasing, communication with suppliers and customers, and interdepartmental interaction 


Education and Work Experience

  • Bachelor's degree in related field with 2 years experience 
  • Associate Degree in related field with 3 years experience 
  • High School Diploma with 5 years experience 


 
 
Job Number: 1610055971
Job Location: Sacramento, CA
Per Diem: No
Duration: 6 months
Input Date: 09/16/2016
Firm Name: PDS TECHNICAL SERVICES
Attention: Lea Salmo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002FXkO&URLSource=cjhunter

Director of Technical Publications

Description:

PDS Tech is seeking candidates for Director of Technical Publications for the Regional Jet Program.
The primary work location will be Seattle, Washington, USA, with travel required to Nagoya, Japan.



Job Description



The Customer Support Director of Technical Publications is responsible for the Development, Verification & Validation, Certification Approval, Publication and Revision of all maintenance and repair documents for the program to ensure the aircraft can be maintained in an airworthy condition as designed by Engineering and approved by regulatory authorities.  Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team (including 3rdparties required to supplement staff) and team structure, implementing governance and communication processes, and the performance of the group.



 



Scope of Work



Processes:



  • Implement the processes and tools required to author, publish and revise all maintenance and repair documents in accordance with industry standards.
  • Manage the document development process to meet program schedule milestones.
  • Establish and manage 3rd parties required to supplement the staff.
  • Coordinate with Design Engineering and Suppliers to obtain technical information and content required to meet industry standards for document scope and content.
  • Author and publish all Instructions for Continuing Airworthiness (ICA) documents (see Deliverables and Products section for a list of ICA documents) and other industry standard manuals required for maintenance and repair of the fleet.
  • Establish the document revision process required to incorporate changes from Design Engineering as well as Customer Originated Change (COC) requests (e.g. Engineering Orders, SB accomplishment, implemented Supplemental Type Certificates, etc.).
  • Review and accept Component Maintenance Manuals (CMM) produced by Partners.
  • Author and publish Service Bulletins originating from the Airplane Change Process


“Authoring” as described above include the development of maintenance procedures, safety warnings, cautions & notes, access identification, remove/replace instructions, and test procedures.  All documents produced by this group’s activities must conform to strict formatting and publishing standards as defined by ATA S1000D and other adopted industry specifications.  Documents are revision controlled to include highlight sheets, list of effective pages, revision bars, and distributed in both PDF and SGML (selected documents only) upon approval by the required regulatory authority as applicable.



 



The primary deliverables of Technical Publications include:



  • Service Bulletins
  • Maintenance Tips
  • Aircraft Maintenance Manual (AMM)
  • Fault Isolation Manual (FIM)
  • Aircraft Recovery Manual (ARM)
  • Standard Wiring Practice Manuals (SWPM)
  • Wiring Diagram Manual (WDM)
  • System Schematic Manual (SSM)
  • Structural Repair Manual (SRM)
  • Aircraft Illustrated Parts Catalog (AIPC)
  • Corrosion Prevention Manual (CPM)
  • Non Destructive Test Manual (NDTM)
  • Maintenance Planning Document (MPD)
  • Maintenance Review Board Report (MRBR)
  • Maintenance Task Cards (MTC)
  • Illustrated Tool & Equipment Manual (ITEM)
  • Maintenance Facilities and Equipment (MFEPM)
  • Component Maintenance Manuals (CMM) –  Proprietary Parts


The Technical Publications function will be performed both in Seattle, WA and Komaki, Japan.  Third parties will be used for the initial document creation process as the permanent team is formed and capabilities are implemented.



 






      Expected Education/Experience and Skills:



      1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
      2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in senior leadership positions providing Technical Publication functions to commercial airline customers.
      3. Candidates must be familiar iSpec2200 and S1000D and have participated in technical publication Industry Standards groups.
      4. Candidates must have skills and experience managing Suppliers.

       
      Job Number: 1710063876
      Job Location: Seattle, WA
      Duration: 24 months
      Input Date: 03/27/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Lucinda Contreras
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002GKHP&URLSource=cjhunter

      Director, Training & Flight Operations

      Description:
      Legacy Engineering, a division of PDS Tech, is seeking candidates for Director, Training & Flight Operations, Customer Support Division for the Regional Jet Development Program. 
      This position is located in Nagoya, Japan.  

      In this role, you will be responsible for the development and delivery of Regional Jet Customer training, flight manuals and flight operations engineering support. 



      • Training services include the development of courseware, training devices, training manuals and delivery of initial and recurrent training for Pilots, Technical/Mechanics, Cabin Crews, Ground Servicing Crews, and Dispatchers within an airline. In addition, this person must manage the relationship and performance of CAE, the Company's selected training service provider. 
      • Development, verification/validation and certification of flight operations manuals
      • Flight Operations Engineering support to Company's customers


      Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team and team structure, implementing governance and communication processes, and evaluating the performance of the group.


      Work Location
      The Primary Work Location will be Nagoya, Japan.  Travel to USA or other country will be required.

      Scope of Work
      Specific Training responsibilities include:

      • Overall management of the relationship with and performance of CAE, Company’s training services provider, ensuring training devices and services are high quality at market prices
      • Development and maintenance of training curriculum and courseware for pilots, technicians/mechanics, flight attendants, and flight planning engineers, and ground handling services
      • Development and maintenance of training documentation for each course offered
      • Ensure there are sufficient qualified training instructors located at training delivery sites for the life of the aircraft
      • Ensure training devices (e.g., Full Flight Simulators (FFS), Integrated Procedures Trainers (IPT), Virtual Maintenance Trainers (VMT), Computer Based Training (CBT), Door Trainer and Cabin Trainers) & training facilities meet training objectives and are certified (where applicable) by regulators
      • Obtain regulator certifications such as OSD, FSB, etc.
      • Commitment of training services (both proforma and for fee) to customers as part of the airplane sales process
      • Scheduling customer training at a location that minimizes customer travel costs, meets customer requirements for timing (schedule), and fits within the Company's Training Program strategy.

       
      Specific Flight Operations Support responsibilities include:

      • Define the process interfaces with Flight Test organization, Pilot organization and Flight operation engineering organization. 
      • Development, verification/validation, maintenance and delivery of all technical and administrative documents in support of customer’s flight operations.
        • Airplane Flight Manual (AFM)
        • Flight Crew Operating Manual (FCOM)
        • Quick Reference Handbook (QRH)
        • Weight & Balance Manual (WBM)
        • Master Minimum Equipment List (MMEL)
        • Dispatch Deviation Guide (DDG)
        • Flight Crew Training Manual (FCTM)
        • Cabin Crew Operating Manual (CCOM)
        • Aircraft Characteristics for Airport Planning (AC)



      • Ensure documents meet industry standards for content and format by participating in and influencing industry standards board that define flight operations documentation requirements
      • Create airplane performance databases and may provide specialized training courses to customers to assist them in their understanding and use of the airplane and documents listed above.  Such courses may include:
        • Performance Engineers course
        • Weight & Balance course

      • Review and approve requests from airlines for non-normal operations such as flight with missing secondary structure
      • Respond to Flight Operations related Customer Service Requests.  Utilize the Safety Process for emergent Flight Operations related Safety issues.
      • Prepare and Release Flight Operations Bulletins.  MITAC must define both a Routine bulletin type as well as an Alert bulletin type to correspond to the Maintenance related Service Bulletins
      • Define a change process that addresses Flight Operations related changes that may impact the certification basis of the airplane (e.g. Airplane Flight Manual)

      Expected Education/Experience and Skills:



      1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
      2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in managerial positions providing Training and/or Flight Operations management functions to commercial airline customers.
      3. Commercial pilots license preferred.
      4. Candidates must have skills and experience managing Partners and Suppliers.

       
      Job Number: 1710068573
      Job Location: Nagoya,
      Duration: 36 months
      Input Date: 05/24/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chad Dunavant
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002JqSM&URLSource=cjhunter

      Doors Design Engineer

      Description:
      General Summary:
      Design Engineer responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

      Duties and Responsibilities:
    1. Generates Engineering Models and Drawings utilizing CATIA Version 5
    2. Performs trade studies to identify optimal engineering solution
    3. Collaborates with the Integrated Product Team to resolve cross functional issues
    4. Reviews work performed by others and ensure work is to the highest standard
    5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
    6. Have the ability to understand and apply certification requirements
    7. Implement design solutions optimized for cost and weight
    8. Manages task execution to ensure on-time and on-target completion.
    9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality
    10. Searches for problem root cause and develop corrective action plans and solutions
    11. Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones
    12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience

      Education, Work Experience, Certification and/or Licensure:
      BS in Mechanical Engineering with 10-15 years directly related experience
    13. OR MS / MBA with 8-13 years of experience
    14. OR 18-23 years directly related experience
    15. Some Travel may be required

      Knowledge, Skills and Abilities:
    16. Proficient in use of CATIA Version 5
    17. Advanced knowledge of drafting rules
    18. Advanced knowledge of Geometrical Dimensioning and Tolerancing
    19. Proficient in Microsoft Office Products
    20. Use of Team Center
    21. Familiar with FAR Part 23 or Part 25
    22. Functional knowledge of SAP
       
    23. Job Number: 28-010
      Job Location: Greensboro, NC
      Rate: $50 - $65/hr.
      Per Diem: YES
      Overtime: YES
      Duration: 1 YR+
      Start Date: ASAP
      Input Date: 02/14/2017
      Firm Name: PRECISION PERSONNEL INC
      Attention: Matt
      Address: 600 CLEVELAND ST STE 700
      City, State: CLEARWATER, FL 33755
      Phone: 727/449-0600
      800 Phone: 877/600-2333
      Fax Phone: 727/449-0627
      Email: matt@precisionpersonnel.com
      Website: www.precisionpersonnel.com

      Electrical Distribution Designer: Fremont, MI/ Sparta, MI, Flint, MI and Grand Rapids, MI

      Description:
      Please let me know if you would be comfortable with the job description and do send me your updated resume

      Electrical Distribution Designer

      Location: Fremont, MI/ Sparta, MI, Flint, MI and Grand Rapids, MI
      Duration: 19+ months

      Department Summary:
      The LVD Engineering department at client produces quality, expert and efficient design services within scope and on-time to internal and external clients, to provide safe and reliable electric service to our customers.

      Job Description/Responsibilities:
      Primarily responsible for electric distribution system design for the Low Voltage Distribution (LVD) Engineering, the LVD Engineering Technician will design projects as approved through the LVD Planning department, and as required for new business approved through the client Management department.

      LVD Planning includes distribution circuit System Owners, and CEM includes customer Project Coordinators. These are the two main internal clients of the LVD Engineering and Design department. Designs flow to Scheduling (and then to Field Construction) for execution in partnership with LVD Planning and CEM.

      Key Responsibilities in this area include:
      - Design electric distribution systems for customer relocation, capacity projects, failures or reliability improvement projects
      - Design various new business projects, including line extensions (primary, secondary) and services of various degrees of difficulty, and customer types (residential, commercial, industrial, developments)
      - Design in a CAD system
      - Identify other pole attachments
      - Negotiate with customers and obtaining easements (or work with the Right of Way department)
      - Work with government entities for permits (or work with the Permitting department)
      - Track projects in spreadsheets and/or databases
      - Create projects and/or orders and order materials in SAP
      - Communicate work to internal departments (LVD Planning, Forestry, Long and Short Range Scheduling, Field/Construction, Closeout, etc.)
      - Create billing invoices

      Skills:
      The following skills and abilities will set you apart from others:
      - Experience with electric utility
      - Successfully completed electric power classes
      - Electric distribution system design knowledge and experience
      - Electric distribution system construction knowledge
      - Experience with CAD systems
      - Working with SAP

      Must have:
      - Excellent oral and written communication skills
      - Ability to work as an independent contributor with minimal supervision at the assigned physical work location
      - The LVD Engineering department assists with storm and emergency restoration activities and includes both office and field assignments; employees must be willing to work additional hours as necessary to assist with storm restoration activities

      Education:
      - A 2-year Associate Degree in the requisite scientific or technical field, of which, 48 credit hours must be technical in nature. 48 scientific or technical credit hours as measured on a semester basis; the 48 scientific or technical credit hours can be obtained through colleges, technical institutes, licensed apprenticeship programs, trade schools, military programs, etc.
       
      Job Number: 17-09231
      Job Location: Grand Rapids, MI
      Rate: Open
      Duration: 20 months
      Start Date: Asap
      Input Date: 07/06/2017
      Firm Name: ICONMA LLC
      Attention: Mohamed Zoheb
      Address: 850 STEPHENSON HWY STE 612
      City, State: TROY, MI 48083
      Phone: 248/602-3856
      Email: mzoheb@iconma.com
      Website: iconma.com

      Electrical Engineer

      Description:

      PDS Tech, Inc. is seeking an Electrical Engineer for a position located in Kansas City, MO. 
      Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

      The Client's organization has several open opportunities for Electrical Engineers.  We are seeking engineers who are interested in supporting one or more of the following areas:  electrical and/or electronic components and major assemblies; discrete and custom devices; complex cables; RF/radar/antenna devices and components; test equipment hardware and/or software; test & controls; purchased and COTS products; control account management.

      • Performs project planning and manages project resources, including multiple individuals and disciplines, to achieve quality, delivery, and cost objectives.
      • Conducts research and development experiments to resolve complex engineering and quality problems involving highly technical, scientific methods.
      • Writes technical reports on results and conclusions drawn from experiments conducted and incorporates findings in formal specifications.
      • Translates design agency concepts into production items by coordinating the activities of engineering, quality, manufacturing, and related organizations.
      • Estimates set-up times, flow times, costs of production and acceptance equipment, and compiles cost estimates and delivery quotations, monitors performance, and prepares reports, statistics, and recommendations for management review.
      • Contributes to business growth through the pursuit of new technology; participates in establishing operating procedures on new products and components.
      • Defines and recommends new designs, design changes, and alternate designs of instruments, and test equipment, and orders tooling, gaging, and equipment necessary to assure product quality.
      • Plans and performs engineering testing and development programs and uses advanced statistical and scientific methods to address and resolve critical engineering and production problems to assure product manufacturability.
      • Originates, refines, and releases complex manufacturing or inspection work directions.
      • Determines acceptability of processes and materials in conjunction with customers, design agency, quality, and other affected organizations.
      • Interacts with customers, design agency and/or supplier counterparts to resolve moderate to complex design, development, production and acceptance issues.
      • Based on research, applies, develops and recommends innovative methodologies and technologies which are equal to the industry's state of the art to resolve processing and design problems.
      • Provides technical consultation to management and others, and leads technical project teams. 
      • Responsible for work that may involve longer range and/or complex business objectives in field of expertise.
      • Evaluates and implements innovations and technological advances that improve quality, reduce flowtime, improve productivity, and enhance operational surety.
      • Performs highly complex calibration and measurement services, recommends changes in calibration procedures to improve services, and solves special measurement problems.
      • May perform other duties as required.
      • Conducts activities in a safe and healthy manner and works in accordance with established HS&E requirements to ensure the protection of employees, the public, and the environment.  Takes actions necessary to "stop" work when an unsafe condition or action is identified.  Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

      Basic Qualifications: 
      • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
      • Bachelor of Science degree in Electrical Engineering from an ABET accredited program or an equivalent ABET accredited engineering degree.
      • Minimum two (2) years directly applied engineering experience.


      Additional Qualifications: 

      • Five (5) or more years directly applied engineering experience in a technology and/or manufacturing environment preferred.
      • Advanced degree in an engineering, physics or business discipline is advantageous.
      • Six Sigma certification (black belt; green belt) preferred.
      • Experience/history reflective of executing continuous improvement toward products and/or processes.
      • Technical project management experience.
      • Experience/familiarity with enterprise resource planning and/or earned value management systems.
      • Experience presenting technical material to varied levels of audiences.
      • Willingness to travel up to 25% of time.

       
      Job Number: 1710068676
      Job Location: KS City, MO
      Duration: 6 months
      Input Date: 05/25/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Tanya James
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002Jr0W&URLSource=cjhunter

      Electrical Engineer

      Description:
      Electrical Engineer reports to the Engineering Manager. The Electrical Engineer plans, designs, and oversees the installation, operation and maintenance of electrical/electronic components, equipment, and systems. Furthermore, acts as a focal point/ individual contributor with respect to electrical and electromagnetic compatibility compliance to industry/regulatory requirements and standards for airborne applications such as RTCA DO-160 or MIL-STD-461E.
      Electrical Engineer performs conventional, moderately complex engineering assignments that may involve component, equipment or product design, simulation, testing, and preparation of specifications, process studies, and/or research investigations. Instructions are provided on task specifications and design constraints. Close guidance on new design or applications is provided.


      JOB RESPONSIBILITIES

      • Applies standard engineering techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.
      • Performs low to medium complex circuit/wiring design activities and, subsequently, prepares appropriate validation and verification means.
      • Supports product certification/qualification with subject matter knowledge and exercise professional judgment whilst supporting other business functions.
      • Typically focuses on existing products or processes.
      • Liaises with drafters, technicians, and others to contribute to project completion.
      • Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.
      • Performs other related duties as required.



      MINIMUM REQUIREMENTS:
      • Bachelor's degree in Electrical Engineering from an accredited four-year college or university; and three-to-five years related professional experience and/or training; alternatively, an equivalent combination of education and experience.
      • Aerospace industry experience is strongly preferred.
      • Must be proficient with basic physical laws/techniques as applied in electrical engineering (e.g. Ohm’s Law, Kirchhoff’s Laws), electromagnetic characteristics of materials, electrical circuit theory, two-pole and four-pole theory, Maxwell equations, and basic linear/digital/power electronics.
       
      Job Location: Everett, WA
      Rate: Negotiable
      Per Diem: Possible
      Overtime: Possible
      Duration: LT
      Start Date: ASAP
      Input Date: 05/17/2017
      Firm Name: AMERICAN CYBERSYSTEMS
      Attention: Andrew Walbert
      Address: 1750 112TH AVE NE STE C228
      City, State: BELLEVUE, WA 98004
      Phone: 425/605-2321
      Fax Phone: 425/558-0688
      Email: andrew.walbert@aictalent.com
      Website: www.acsicorp.com

      Electrical Engineer Level 3 - PA - C

      Description:
      Chipton-Ross is seeking an Electrical Engineer Level 3 for an opening in Archbald, PA.

      RESPONSIBILITIES:
      Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.

      REQUIRED EXPERIENCE:
      Electrical circuit design, analysis, and documentation experience

      EDUCATION:
      High School Diploma

      WORK HOURS:
      9/80, 1st Shift

      MISCELLANEOUS:
      Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
       
      Job Number: 162928
      Job Location: Archbald, PA
      Rate: Up to $50.00 DOE
      Duration: 11 Months
      Input Date: 04/18/2017
      Firm Name: CHIPTON ROSS
      Attention: Terry Jones
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: tjones@chiptonross.com
      Website: www.chiptonross.com

      Electrical Engineer - Level 3

      Description:
      PDS Tech, Inc. is seeking an Elctrical Engineer-  Level 3 for an open position in Grand Prairie, TX
      Job Description: 

      • Subordinate to the Integrated Product Team Leader.
      • Responsibilities include hands on lab work, data analysis, technical writing and facilitating meetings. 



       
      Mandatory Skills:
      • Electrical Engineering Bachelor of Science degree or similar experience.
      • 10 years of experience in any combination of hardware verification and validation in related industry (nuclear power instrumentation and control, commercial aviation, or defense).
      • Strong understanding of requirements analysis, derivation, and verification.
      • Ability to derive test requirements and generate test plan, standard operating procedures, conduct test and generate test reports.



      Desired Skills:

      • Hardware/Software verification and validation experience in a DO-254 or similar environment. 

       
      Job Number: 1710066644
      Job Location: Grand Prairie, TX
      Duration: 12 months
      Input Date: 04/12/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Earl Sawyer
      Address: 2154 N CENTER ST STE 405D
      City, State: NORTH CHARLESTON, SC 29406
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000021jzZ&URLSource=cjhunter

      Electrical Engineer - Level 3

      Description:
      Electrical Engineer - Level 3

      Location: Grand Prairie, TX
      Pay Rate: DOE ($40/hr - $45/hr)
      Duration: 6+ month contract
      Schedule: 9/80
      *MUST HAVE AN ACTIVE SECRET CLEARANCE*

      Description
      -Electrical design support will be required to support missile electrical architecture trade studies and concept design.
      -Overall missile electrical design and particular focus for the control actuation system design is required.
      -Candidate may need to work with component suppliers.
      -The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
      -The engineer must be proficient in EE toolsets; have good communication skills, and be able to work with internal and external customers.

      Skill/Experience/Education (Mandatory):
      -Researches, develops, designs, and tests electrical components, equipment, systems, and networks.
      -Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
      -Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or no experience required with a related Masters degree.
      -Considered experienced, but still a learner.
       
      Job Number: 7136
      Job Location: Grand Prairie, TX
      Rate: 40-45
      Per Diem: Split Possible
      Overtime: Possible
      Duration: 6+ months
      Start Date: ASAP
      Input Date: 08/29/2017
      Firm Name: INCONEN CORPORATION
      Attention: Rex Calkins
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Email: rex@inconen.com
      Website: www.inconen.com

      Electrical Engineer - Level 3 - TX

      Description:
      Chipton-Ross is seeking a Electrical Engineer - Level 3 for an opening in Grand Prairie, TX.

      RESPONSIBILITIES:
      Subordinate to the Integrated Product Team Leader. Responsibilities include hands on lab work, data analysis, technical writing and facilitating meetings.

      REQUIRED EXPERIENCE:
      Electrical Engineering Bachelor of Science degree or similar experience.10 years of experience in any combination of hardware verification and validation in related industry (nuclear power instrumentation and control, commercial aviation, or defense). Strong understanding of requirements analysis, derivation, and verification. Ability to derive test requirements and generate test plan, standard operating procedures, conduct test and generate test reports.

      PREFERRED EXPERIENCE:
      Hardware/Software verification and validation experience in a DO-254 or similar environment.

      EDUCATION:
      Electrical Engineering Bachelor of Science degree

      WORK HOURS:
      9/80, 1st Shift
       
      Job Number: 162817
      Job Location: Grand Prairie, TX
      Rate: Up to $60.00 DOE
      Duration: 12 Months
      Input Date: 04/11/2017
      Firm Name: CHIPTON ROSS
      Attention: Kevin Suk
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: ksuk@chiptonross.com
      Website: www.chiptonross.com

      Electrical Engineer - Level 3 with active secret TX

      Description:
      Electrical Engineer - Level 3
      Description
      Electrical design support will be required to support missile electrical architecture trade studies and concept design. Overall missile electrical design and particular focus for the control actuation system design is required. Candidate may need to work with component suppliers. The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years). The engineer must be proficient in EE toolsets; have good communication skills, and be able to work with internal and external customers.
      Skill/Experience/Education
      Mandatory:

      Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
      Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or no experience required with a related Masters degree. Considered experienced, but still a learner.

      Skill Matrix
      There is no skill matrix for this requirement
       
      Job Number: JE-1228
      Job Location: Grand Prairie, TX
      Rate: 45/hr max
      Duration: 12 month contract
      Input Date: 06/28/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Jeana Edrozo
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Email: jeana@midcom.com
      Website: www.midcom.com

      Electrical Engineer - Product/Process

      Description:
      PDS Tech, Inc. is seeking a Product/Process Electrical  Engineer for a position located in Kansas City, MO. 
      Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

      This Electrical Engineer position will fulfill a technical role in the Secure Electronics organization. Engineers in this organization provide engineering support of highly technical and advanced manufacturing processes typically requiring specialized qualifications, knowledge, and/or skill. This engineer will perform project management, as well as, design, development, evaluation, and quality control functions on complex engineering projects and electrical assembly devices. While in the position, increasing roles of project leadership are expected. This position will exercise considerable latitude in determining technical objectives of assignments.

      Summary of Duties:   
       Performs project planning and manages project resources, including multiple individuals and disciplines, to achieve quality, delivery, and cost objectives.
      • Conducts research and development experiments to resolve complex engineering and quality problems involving technical, scientific methods.
      • Writes technical reports on results and conclusions drawn from experiments conducted and incorporates findings in formal specifications.
      • Translates design agency concepts into production items by coordinating the activities of engineering, quality, manufacturing, and related organizations.
      • Estimates set-up times, flow times, costs of production and acceptance equipment, and compiles cost estimates and delivery quotations, monitors performance, and prepares reports, statistics, and recommendations for management review.
      • Participates in establishing operating procedures on new products and components.
      • Defines and recommends new designs, design changes, and alternate designs of instruments, and test equipment, and orders tooling, gaging, and equipment necessary to assure product quality.
      • Plans and performs engineering testing and development programs and uses advanced statistical and scientific methods to address and resolve critical engineering and production problems to assure product manufacturability.
      • Originates, refines, and releases complex manufacturing or inspection work directions.
      • Determines acceptability of processes and materials in conjunction with customers, design agency, quality, and other affected organizations.
      • Based on research, applies, develops and recommends innovative methodologies and technologies which are equal to the industry's state of the art to resolve processing and design problems.
      • Provides technical consultation to management and others, and leads technical project teams.
      • Responsible for work that may involve longer range and/or complex business objectives in field of expertise.
      • Evaluates and implements innovations and technological advances that improve quality, reduce flowtime, improve productivity, and enhance operational surety.
      • Performs highly complex calibration and measurement services, recommends changes in calibration procedures to improve services, and solves special measurement problems.
      • May perform other duties as required.
      • Conducts activities in a safe and healthy manner and works in accordance with established HS&E requirements to ensure the protection of employees, the public, and the environment. Takes actions necessary to "stop" work when an unsafe condition or action is identified. Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

      Basic Qualifications: 
      • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
      • Bachelor of Science degree in Electrical Engineering from an accredited Engineering program.
      • Two (2) or more years of relevant experience in engineering of products or processes or comparable related technical area. 

      Additional Qualifications:  
       
      • Existing DOE Q clearance.
      • MS in Electrical Engineering from ABET accredited institution.
      • Five (5) or more years of relevant, progressive experience preferred in engineering of products or processes or comparable technical area.
      • Demonstrated experience in project leadership.
      • Broad knowledge of manufacturing or quality processes and techniques.
      • Ability to apply advanced design, development, evaluation, and quality control techniques to highly complex.
      • Electrical Engineering concepts and projects.
      • Ability to work without supervision, with latitude for independent action and decision making.
      • Ability to provide technical guidance, project management, consultative services, and innovative solutions.
      • RF engineering experience.
      • Strong communication skills, both written and verbal.
      • Demonstrated technical innovation and problem solving.
      • Significant experience in a manufacturing or design environment.

       
      Job Number: 1710068677
      Job Location: KS City, MO
      Duration: 6 months
      Input Date: 05/25/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Tanya James
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002Jr0b&URLSource=cjhunter

      Electrical Engineer - TX - C

      Description:
      Chipton Ross is seeking an Electrical Engineer in GRAND PRAIRIE, TX

      Start Date: ASAP

      Job Description:
      Electrical design support will be required to support missile electrical architecture trade studies and concept design. Overall missile electrical design and particular focus for the control actuation system design is required. Candidate may need to work with component suppliers.

      The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years). The engineer must be proficient in EE toolsets; have good communication skills, and be able to work with internal and external customers.

      Mandatory Skills:
      Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes. Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or no experience required with a related Masters degree. Considered experienced, but still a learner.

      MISCELLANEOUS:
      Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

       
      Job Number: 161283
      Job Location: Grand Prairie, TX
      Rate: Up to $45.00 DOE
      Duration: 1 Year
      Input Date: 12/21/2016
      Firm Name: CHIPTON ROSS
      Attention: Robert Davis
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: rdavis@chiptonross.com
      Website: www.chiptonross.com

      Electrical Engineer 2/3- SECRET

      Description:
      PDS Tech, Inc. is seeking an Electrical Engineer in Melbourne, FL. 

      Position Summary / Responsibilities
       
      Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
       

       


      Qualifications
       
      Basic Qualifications:  
      ATP Engineer 2/3  

      • Strong MS Office skills, strong technical writing abilities, must be willing to relocate to Palmdale in approx. 1-2 years. 
      • Knowledge of electrical harness continuity testing, MIL-STD-810 testing, fiber optic testing, data communication cable and coaxial cable testing, and basic programming ability desired.
      • Experience in support of aerospace electrical subsystem design or test operations. 
      • Level 2: 2 Years with Bachelors in Science Electrical Engineering; 0 Years with Masters
      • Level 3: 5 Years with Bachelors in Science Electrical Engineering; 3 Years with Masters; 0 Years with PhD.

       
      Position requires an active DoD Secret clearance
      Active DoD Secret Security Clearance is required to start. Secret Clearance must have been established or reviewed within the last 6 years. Contingent upon the ability to obtain access to Special Programs is required.
       
      Job Number: 1710066898
      Job Location: Melbourne, FL
      Duration: 9 months
      Input Date: 04/17/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Lucinda Contreras
      Address: 11828 W CENTRAL STE 100
      City, State: WICHITA, KS 67212-5129
      Phone: 316/729-1800
      800 Phone: 800/333-8644
      Fax Phone: 316/729-1857
      Email: cecjwichita@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000021l2S&URLSource=cjhunter

      Electrical Engineer Designer - Secret Clearance

      Description:
      PDS Tech is seeking a candidate for the Electrical Engineer Designer- Secret Clearance position located in Tucson, AZ.  
      The Electrical Engineer will develop FPGA designs for all major vendors and device families including: Xilinx, Altera, Lattice, and Microsemi.
      Designs are implemented using VHDL and support the following type of applications: gigabit serial interfaces, Radio Frequency (RF) and Electro-Optical (EO) Digital Signal Processing (DSP), control loops, data links, embedded processing, and processor interfaces.
      As a configurable logic designer you will work with circuit card designers and systems engineers to develop requirements, select parts, architect the device, perform code development, simulations, and place and route.
      Designs are verified against requirements using both directed test and constrained random methodologies and are supported from requirements definition through integration and test, and eventually production.
      Configuration management of the design is maintained throughout the entire design process. 
      Required Skills:
      U.S. Citizenship is required
      • Ability to apply advanced digital design knowledge and principles to complex designs
      • Proficient at using a hardware description language such as VHDL, Verilog, or System Verilog
      • Proficient with FPGA timing constraints and timing closure • Proficient with digital toolsets and backend vendor tools
      • Proficient with a software or scripting language
      • Ability to take a design from concept to production
      • Ability to collaborate and work with other disciplines
      • Ability to solve integration issues and determine root cause
      • Self-directed – Able to complete tasks with minimum oversight
      • Strong written and verbal communications
      • Cross discipline knowledge such as software, digital signal processing, etc.

      Desired Skills:
      • Digital Signal Processing and simulation using MATLAB or equivalent
      • Experience applying fixed-point analysis and conversion of floating point algorithms
      • Experience with embedded systems design utilizing Microblaze, NIOS, and ARM processors
      • Knowledge of encryption/decryption standards such as AES, RSA, ECC, etc.
      • Knowledge of industry standard interfaces and protocols such as AXI, PCIe, SPI, I2C, etc.
      • Integration experience with FPGA based systems
      • Knowledge of ASIC design flow and process
      • Familiarity with advanced verification techniques
      • Ability to manage and trace requirements.

      Required Education: Bachelor of Science in Electrical Engineering, Science or Mathematics with a minimum of 4 years of relevant experience.
       
      Job Number: 1710064893
      Job Location: Tucson, AZ
      Duration: 12 months
      Input Date: 05/16/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: David Goodman
      Address: 1839 S ALMA SCHOOL RD STE 250
      City, State: MESA, AZ 85210
      Phone: 480/929-9922
      800 Phone: 800/657-0997
      Fax Phone: 480/929-9779
      Email: cecjphoenix@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000021Tu7&URLSource=cjhunter

      Electrical Engineer II

      Description:
      PDS Tech is seeking an Electrical Engineer II for an open position in Arlington, TX

      In your role, you will:


      The Electrical Engineer 2 is responsible for designing and developing the electrical system components on a variety of flight simulator programs. Design responsibilities include creating system wiring diagrams, circuit breaker panels, interface diagrams, power distribution, and other items using CAD tools. The position will work closely with senior level electrical engineers.
       
      Duties:
      • Provide electrical design and development support on a variety of simulator programs.
      • Coordination of design activities with fellow electrical team members, mechanical engineering counterpart, and systems engineering to ensure that designs meet program requirements.
      • Support peer reviews for electrical designs.
      • Perform and document electrical load analysis.
      • Support development of Interface Control Documents (ICD)s.
      • Ability to work with a variety of I/O systems.
      • Knowledge of both analog and digital component design.
      • Support development of hardware subcontractor specifications.

       
      As our ideal candidate, you will meet the following requirements:

      Qualifications:
      • B/S in Electrical Engineering.
      • 4+ years of electrical engineering technical experience.
      • Experience with CAD software, preference to AutoCAD.
      • Systems integration experience.
      • Knowledge of FIO, Racktangle, & VMIC I/O is a plus.
      • Good computer skills including working knowledge of Microsoft Office.
      • Strong communication skills and good team work.
      Be able to obtain a DOD security clearance.

      Additional requirements: 
      Aerospace experience is required.
       
      At a minimum resumes should reflect experience with the following within the aerospace industry.
       
      •             Design and develop electrical systems on aircraft
      •             Produce wiring diagrams using computer aided design
      •             Experience with electrical load analysis

       
       
      Job Number: 1610060907
      Job Location: Arlington, TX
      Per Diem: No
      Duration: 6 months
      Input Date: 12/06/2016
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Rebecca Burrows
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002FyJF&URLSource=cjhunter

      Electrical Engineer Level - 3 - SECRET

      Description:
      PDS Tech, Inc. Is seeking a Electrical Engineer - Level 3 for an open position in Grand Prairie, TX.
      MUST HAVE SECRET CLEARANCE
      Job Description: 
      • Electrical design support will be required to support missile electrical architecture trade studies and concept design.
      • Overall missile electrical design and particular focus for the control actuation system design is required.
      • Candidate may need to work with component suppliers.
      • The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
      • The engineer must be proficient in EE toolsets; have good communication skills, and be able to work with internal and external customers. 

      Mandatory Skills:
      • Researches, develops, designs, and tests electrical components, equipment, systems, and networks.
      • Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
      • Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or no experience required with a related Masters degree.
      • Considered experienced, but still a learner. 



       
       
      Job Number: 1610061539
      Job Location: Grand Prairie, TX
      Per Diem: No
      Duration: 12 months
      Input Date: 01/17/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Rebecca Burrows
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002G2zV&URLSource=cjhunter

      Electrical Engineer with active secret CA

      Description:
      Requirement #AERO-REQ-0578
      Work location Palmdale, CA
      Work Week 9/80
      Priority High
      Needed Date 06/27/2017
      End Date 01/31/2018
      Number of Resources1
      Security Clearance Secret (Prime Contract: Circle A, Can start w/o clearance: No, Interim Clearance Sufficient: No)

      Title: Electrical Engineer-N
      Description
      Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, products, and systems for commercial, industrial, and domestic purposes. The applicant will be focused on electrical schematic design and Generator Control Unit (GCU) integration for an ADP program. The applicant will also perform electrical load analysis and analysis and integration of aircraft generators. Duties include creating wiring diagrams and harness assembly diagrams, resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised manufacturing wiring documents Candidate will be part of a team effort to develop wiring from design to installation, to include liaisoning between Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance with specifications.
      Skill/Experience/Education
      Mandatory:

      Experience creating electrical schematics and developing aircraft electrical power systems. Secret Clearance with investigation within the past five years.
      Desired:

      Experience with Generator Control Unit (GCU) integration. Experience with Mentor Graphics Capital Harness; Experience designing analog circuit logic. Experience with CATIA V5.

      Skill Matrix
      Skill Name Description Level (1-5, 5 being the highest)
      1 2 3 4 5 Years Mandatory(Yes/No)
      Elecrical Circuit Design Perform analog circuit logic and schematic design. 9-10 Years Yes
      Electrical Power System Design Design aircraft Electrical Power Systems, specifically Generator Control Unit integration. 6-8 Years Yes



      Interview Required Yes
      OT Allowed Yes (#hours allowed: 0, Pre-Approval Reqd.:Yes)
      Travel No
      Non-Exempt
       
      Job Number: JE-0578
      Job Location: Palmdale, CA
      Rate: 65-75/hr DOE
      Duration: 7 month contract
      Input Date: 09/06/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Jeana Edrozo
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Email: jeana@midcom.com
      Website: www.midcom.com

      Electrical Engineer with active secret CA

      Description:
      Title: Electrical Engineer-N
      Work Location: Palmdale, CA
      Start Date: 6/27/2017
      Active secret
      70-75/hr


      Job Description:
      Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, products, and systems for commercial, industrial, and domestic purposes. The applicant will be focused on electrical schematic and harness design and development for an ADP program. The applicant will also perform electrical load analysis and analysis and integration of aircraft generators. Duties include creating wiring diagrams and harness assembly diagrams, resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised manufacturing wiring documents Candidate will be part of a team effort to develop wiring from design to installation, to include liaisoning between Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance with specifications.


      Mandatory Skills:
      Experience creating electrical schematics and performing electrical wiring harness design for aircraft. Secret Clearance with investigation within the past five years.


      Desired Skills:
      Experience with Mentor Graphics Capital Harness; Experience designing analog circuit logic. Experience with CATIA V5.

      Skill Matrix
      Skill Name Description Level (1-5, 5 being the highest)
      1 2 3 4 5 Years Mandatory(Yes/No)
      Elecrical Circuit Design Perform analog circuit logic and schematic design. 9-10 Years Yes
      Wire Harness Design Design aircraft electrical wiring harnesses, preferably using Mentor Graphics Capital Harness. 9-10 Years Yes
       
      Job Number: JE-0577
      Job Location: Palmdale, CA
      Rate: 70-75/hr DOE
      Duration: 6 month contract
      Input Date: 06/23/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Jeana Edrozo
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Email: jeana@midcom.com
      Website: www.midcom.com

      Electrical Engineer with active secret CA

      Description:
      Job Title: Electrical Engineer
      Job Number: 159158/0498
      Location: Palmdale, CA
      Compensation: 65-75/hr
      Assignment Length: 12 month contract
      Security Clearance Secret

      Description:


      Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, products, and systems for commercial, industrial, and domestic purposes. The applicant will be focused on the electrical wiring and harness assembly diagram design and development for an ADP program. Duties include creating electrical architectures/schematics and creating electrical harness drawings. Also includes resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised manufacturing wiring documents. .
      Skill/Experience/Education
      Mandatory:

      Experience creating electrical architectures/schematics and electrical harness design. Experience using electrical harness design tools such as Mentor Graphics Capital Harness or HarnesSyS.
      Secret Clearance.
      Desired:

      Experience performing electrical load analysis and electrical power system integration
      Experience with CATIA V5 Experience generating System Check Procedures and providing support Experience incorporating subsystem hardware into a Software Integration Lab (SIL) and troubleshooting integration issues.

      Skill Matrix
      Skill Name Description Level (1-5, 5 being the highest)
      1 2 3 4 5 Years Mandatory(Yes/No)
      Wiring Harness Design Design aircraft electrical wiring harnesses, preferably using Mentor Graphics Capital Harness. 6-8 Years Yes
      Electrical architecture/schematic design Evaluate system requirements to generate electrical architectures and schematics. 6-8 Years Yes
      Electrical Power System Design Evaluate electrical load requirements and design electrical power and distribution systems. 6-8 Years No
       
      Job Number: DW-0498
      Job Location: Palmdale, CA
      Rate: 65-75/hr DOE
      Duration: 12 month contract
      Input Date: 06/05/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Jeana Edrozo
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Email: jeana@midcom.com
      Website: www.midcom.com

      Electrical Systems Engineer (DER preferred)

      Description:
      Electrical Systems Engineer
      Location: Idaho
      Duration: 6 months +
      Rate: Open

      Job Summary
      Electrical Engineer (DER Preferred)
      Desired Skills
      Radio and Avionic installation and integration.
      Job Description:
      Electrical Systems Engineer
      We are seeking an Electrical Engineer. This position will report to the Type Design Engineering Manager and will
      be responsible for developing processes, solving problems, and making improvements across various systems (Electrical, Avionics,
      Environmental Controls, Flight Controls, Mechanical Systems, etc).
      Essential Duties and Responsibilities (other duties may be assigned):
       Design and develop products, tools and or systems.
       Research and implement solutions for design improvements and part obsolescence.
       Perform testing to validate designs.
       Complete design and drawing changes with engineering substantiations.
       Prepare requirements, specifications, and assist with the development of processes.
       Prepare certification documentation, reports, procedures and tests.
       Develop, document, and integrate engineering principles, lean manufacturing techniques, and standard operating
      procedure into the engineering culture.
       Develop designs using Design for Manufacturing (DFM) and Lean Manufacturing principles.
       Plan, schedule, conduct, or coordinate detailed phases of engineering projects in a part of a major project or in a total
      project of moderate scope.
       Perform work which involves conventional engineering practice but may include a variety of complex features such as
      conflicting design requirements, unsuitability of standard materials, and difficult coordination requirements.
       Provides technical solutions to a wide range of difficult problems. Solutions are imaginative, thorough, practicable, and
      consistent with organizational objectives.
      Position Requirements:
       Bachelor's degree and 5 to 7 years engineering experience in the aerospace industry.
       The ability to work independently as well as lead a small team of peers.
       CAD and MS Office Suite proficiency.
       NX experience preferred.
       Experience in bench and the flight testing environments preferred.
       Familiarity with 14 CFR Part 23 regulations required.
      The Structures Company is an AA/EOE.
       
      Job Location: Idaho, ID
      Per Diem: yes
      Overtime: possible
      Duration: 6 mos +
      Start Date: asap
      Input Date: 06/16/2017
      Firm Name: STRUCTURES COMPANY LLC
      Attention: Mark Sharp
      Address: P O BOX 2278
      City, State: SEAL BEACH, CA 90740
      Phone: 714/823-3000
      Email: marksharp@thestructurescompany.com
      Website: www.thestructurescompany.com

      Energy Associate

      Description:
      PDS Tech, Inc. is seeking an Energy Associate for an open position in Berlin, CT. 

      This position is responsible for supporting the Connecticut Industrial Energy Efficiency Team. The primary responsibility is assisting in the management of industrial projects in CT for manufacturing customers for implementation of electric and natural gas energy efficiency measures. This position is also responsible to follow up on leads and to respond to new inquires, make contacts and promote cost-effective energy efficiency measures to industrial customers.



       
      The ideal candidate will have:
      • experience or course work with implementation of or knowledge of energy-efficient equipment and systems improvement for process measures, compressed air systems, lighting, heating, ventilating and air conditioning (HVAC) systems, energy-saving control strategies, and other options
      • Knowledge of Lean manufacturing concepts Energy modeling experience is also highly desired.
      • The ideal candidate is an Engineering student with a focus on Energy Efficiency and with experience with working in a team and with effective project management skills.
      • The position requires solid understanding of computer applications such as Microsoft Word and Excel. Demonstrations of exceptional customer service and communication skills are required.
      • Candidates pursuing or interested in Certified Energy Manager (CEM), or Fundamentals of Engineering (FE) Certifications are preferred.


      Candidates must have the following skills / experience to be considered:
      (1) Project Management experience
      (2) Energy Efficiency knowledge
      (3) Manufacturing/Process knowledge
      (4) Organizational skills.
      (5) Good Communication skills.
       
       
      Job Number: 1610059444
      Job Location: Kensington, CT
      Duration: 12 months
      Input Date: 11/01/2016
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chris O\'Connor
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002FpTY&URLSource=cjhunter

      Engineer Electrical 2/3 - FL - C

      Description:
      Chipton-Ross is seeking a Engineer Electrical 2/3 for an opening in Melbourne, FL.

      RESPONSIBILITIES:
      Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.

      REQUIRED EXPERIENCE:
      ATP Engineer 2/3 (1 position)
      -Strong MS Office skills, strong technical writing abilities, must be willing to relocate to Palmdale in approx. 1-2 years.
      -Knowledge of electrical harness continuity testing, MIL-STD-810 testing, fiber optic testing, data communication cable and coaxial cable testing, and basic programming ability desired.
      -Experience in support of aerospace electrical subsystem design or test operations.
      -Level 2: 2 Years with Bachelors in Science Electrical Engineering; 0 Years with Masters
      -Level 3: 5 Years with Bachelors in Science Electrical Engineering; 3 Years with Masters; 0 Years with PhD.

      EDUCATION:
      Bachelors in Science Electrical Engineering

      WORK HOURS:
      Shift: 1st Shift

      MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

       
      Job Number: 162897
      Job Location: Melbourne, FL
      Rate: $34 to $51.00 DOE
      Duration: 9-12 Months
      Input Date: 04/14/2017
      Firm Name: CHIPTON ROSS
      Attention: Robert Davis
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: rdavis@chiptonross.com
      Website: www.chiptonross.com

      Engineer Structural 3 - FL - C

      Description:
      Chipton-Ross is seeking a Engineer Structural 3 for an opening in Melbourne, FL.

      RESPONSIBILITIES:
      Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Analyzes damage tolerance, durability, design allowables and structural modeling. Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis. Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications.

      REQUIRED EXPERIENCE:
      Structural Analysis Engineer 3
      -Mid-level Mechanical, Aerospace or Civil Engineer with experience in aerospace static and dynamic structural analysis, structural design, shock, vibration, and fatigue.
      -Primary responsibilities include support of primarily metallic subsystem and secondary structure design.
      -5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.

      EDUCATION:
      Bachelors in Science

      WORK HOURS:
      Shift: 1st Shift - 9/80

      MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

       
      Job Number: 162894
      Job Location: Melbourne, FL
      Rate: $43 to $54.00 DOE
      Duration: 9-12 Months
      Input Date: 04/14/2017
      Firm Name: CHIPTON ROSS
      Attention: Kevin Suk
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: ksuk@chiptonross.com
      Website: www.chiptonross.com

      Engineer Structural 3-SECRET

      Description:
      PDS Tech, Inc. is seeking a Structural Engineer 3 in Melbourne, FL. 

      Position Summary / Responsibilities
       
      Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Analyzes damage tolerance, durability, design allowables and structural modeling. Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis. Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications.
       

       


      Qualifications
       
      Basic Qualifications:  
       
      Structural Analysis Engineer 3

      • Mid-level Mechanical, Aerospace or Civil Engineer with experience in aerospace static and dynamic structural analysis, structural design, shock, vibration, and fatigue.
      • Primary responsibilities include support of primarily metallic subsystem and secondary structure design. 
      • 5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.

               All positions Require an active DoD Secret clearance
       
      Active DoD Secret Security Clearance is required to start. Secret Clearance must have been established or reviewed within the last 6 years. Contingent upon the ability to obtain access to Special Programs is required.
       
      Job Number: 1710066896
      Job Location: Melbourne, FL
      Duration: 9 months
      Input Date: 04/17/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Lucinda Contreras
      Address: 11828 W CENTRAL STE 100
      City, State: WICHITA, KS 67212-5129
      Phone: 316/729-1800
      800 Phone: 800/333-8644
      Fax Phone: 316/729-1857
      Email: cecjwichita@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000021l2I&URLSource=cjhunter

      Engineer Structural 4/5

      Description:
      PDS Tech, Inc. is seeking a Structural Engineer 4 or 5 in Melbourne, FL. 

      Position Summary / Responsibilities
       
      Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Analyzes damage tolerance, durability, design allowables and structural modeling. Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis. Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications.
       

       


      Qualifications
       
      Basic Qualifications:  
      Dynamics Engineer 5 (1 position)

      • Primary responsibilities include dynamics related support of structural and subsystem design and testing. 
      • Required skills include structural and subsystem test dynamic loads development, impact analysis, as well as shock, vibration, and acoustic evaluation and mitigation.
      • The work will include building dynamic models, and conducting static and dynamic analyses.
      • The work will also include test planning and coordination for ground and subcomponent tests.
      • 14 Years with Bachelors in Science; 12 Years with Masters; 9 Years with PhD.

      Structural Analysis Engineer 4 (1 position)

      • Experienced Mechanical, Aerospace or Civil Engineer with experience in aerospace static and dynamic structural analysis, structural design, shock, vibration, and fatigue.
      • Primary responsibilities include support of primarily metallic subsystem and secondary structure design.
      • 9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD. 

               All positions Require an active DoD Secret clearance
       
      Active DoD Secret Security Clearance is required to start. Secret Clearance must have been established or reviewed within the last 6 years. Contingent upon the ability to obtain access to Special Programs is required.
       
      Job Number: 1710066895
      Job Location: Melbourne, FL
      Duration: 9 months
      Input Date: 04/17/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Phil Press
      Address: 370 N WESTLAKE BLVD STE 120
      City, State: WESTLAKE VILLAGE, CA 91362
      Phone: 805/418-9862
      800 Phone: 866/458-4322
      Fax Phone: 805/418-9866
      Email: cecjwestlake@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000021l2D&URLSource=cjhunter

      Engineer Structural 4/5 - (2) - FL - C

      Description:
      Chipton-Ross is seeking a Engineer Structural 4/5 for an opening in Melbourne, FL.

      RESPONSIBILITIES:
      Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Analyzes damage tolerance, durability, design allowables and structural modeling. Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis. Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications.

      REQUIRED EXPERIENCE:
      Dynamics Engineer 5 (1 position)
      -Primary responsibilities include dynamics related support of structural and subsystem design and testing.
      -Required skills include structural and subsystem test dynamic loads development, impact analysis, as well as shock, vibration, and acoustic evaluation and mitigation.
      -The work will include building dynamic models, and conducting static and dynamic analyses.
      -The work will also include test planning and coordination for ground and subcomponent tests.
      -14 Years with Bachelors in Science; 12 Years with Masters; 9 Years with PhD.

      Structural Analysis Engineer 4 (1 position)
      -Experienced Mechanical, Aerospace or Civil Engineer with experience in aerospace static and dynamic structural analysis, structural design, shock, vibration, and fatigue.
      -Primary responsibilities include support of primarily metallic subsystem and secondary structure design.
      -9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.

      EDUCATION:
      Bachelors in Science

      WORK HOURS:
      Shift: 1st Shift - 9/80

      MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

       
      Job Number: 162893
      Job Location: Melbourne, FL
      Rate: $55 to $80.00 DOE
      Duration: 9-12 Months
      Input Date: 04/14/2017
      Firm Name: CHIPTON ROSS
      Attention: Debbie Aubert
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: daubert@chiptonross.com
      Website: www.chiptonross.com

      Engineer-RF - II

      Description:
      PDS Tech, Inc. is seeking a candidate for Engineer-RF - II position located in Alpharetta, GA.

      Responsible for contributing in the RF Design of the regional cellular network. 

      Responsibilities include: 
      Creating search areas within their geographic area of responsibility; working with the performance team to understand area and issues within his/her sector; and working with System Performance counterpart to understand issues and help reduce Lost Calls and Ineffective Attempts within their sector. 

      Other responsibilities include: 
      Creating and supplying cell site translations; performing drive testing to evaluate search area candidate as necessary; preparing FCC/FAA and FAS submissions in a timely manner; performing radio engineering evaluation for system planning and site acquisition; beginning to identify location specific needs for new cells taking baseline, performance, capacity, and population into consideration; and evaluating coverage problems and requirements for coverage cells. 
      BS in Engineering or Computer Science or equivalent work experience in the cellular or telecommunications industry.
      General understanding and or working knowledge in one or more of the following platforms and/or technologies:
      Voice cells infrastructure including
      Lucent, Motorola, Nortel, CDMA data Digital Communications including:   
      DS1, DS3, Fiber, ISDN Operating systems and applications including:  
      UNIX, Windows, MS Office Wireless data service including:  
      CDPD, CDMA, CSD, STP, RF Fingerprinting Analog, CDMA, Flexent Modular cells (CDMA & PCS), RMT software, and 3G technology Test equipment including:  
      T-Birds, DataPro, pilot scanners, baseline equipment, spectrum analyzers RF System Optimization techniques for voice and data for Nortel, Motorola, and/or Lucent infrastructure Should have a good understanding of engineering concepts, and must show aptitude and desire to learn and advance in a technical field.
      Proficient in office computer applications:
      Excel, Word, PowerPoint, and Access.
      5 to 7 years of experience.
       
      Job Number: 1710068969
      Job Location: Alpharetta, GA
      Duration: 12 months
      Input Date: 06/05/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Gabriel Virata
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002JvWP&URLSource=cjhunter

      Engineering Recruiter - Wichita

      Description:
      Job Title:      Engineering Recruiter
      Location:      Wichita, KS
      Salary:           Base + Commission
      Job Type:      Full Time w/ benefits
       
       
      User-added image
       
      “Connecting the Right People to the Right Jobs”
      Do you have a passion for interacting with people and helping them find a job?  Do you thrive in a fast paced, high volume environment?  If so, PDS Tech may have an opportunity for YOU!  We are looking for self-confident experienced recruiters that can persevere in the staffing world.
       
      Job Responsibilities:
      •  Create and build a pool of qualified candidates
      • Assess and analyze candidate’s technical and professional skills through careful resume screening and phone interviews
      • Negotiate wages and other terms and conditions of employment
      • Meet or exceed set goals in a competitive environment

      Job Requirements:

      • Two plus years Engineering Recruiting experience
      • Staffing industry experience desirable
      • Advanced internet recruiting/sourcing techniques
      • Able to interact effectively with internal and external contacts at all levels
      • Able to work flexible hours on short notice as needed
      • Enjoy working in a fast paced environment
      • Use good judgment and discretion to accomplish goals
      • Be currently authorized to work in the United States for any employer

      To View all jobs at PDS Tech please visit our career section at http://www.pdstech.com
      PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.
       
       
       
       
      Job Number: 1710068733
      Job Location: Wichita, KS
      Duration: 12 months
      Input Date: 05/26/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Stacy Smith
      Address: 11828 W CENTRAL STE 100
      City, State: WICHITA, KS 67212-5129
      Phone: 316/729-1800
      800 Phone: 800/333-8644
      Fax Phone: 316/729-1857
      Email: cecjwichita@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002JrHo&URLSource=cjhunter

      Enterprise Architect (Mobile Solution Architect) Level 5 (KS)

      Description:
      Designs, defines and engineers system architecture for new or existing complex computer systems within a defined business process. Determines and defines systems specifications, input/output processes, context, interface, integration, and working parameters for hardware/software compatibility and maintenance of system security. Coordinates design of subsystems and their integration into the total system. Uses knowledge of systems engineering, software improvement frameworks, network architecture, system performance analysis, and information system security to identify, analyze, and resolve program deficiencies. Develops and recommends corrective actions, as well as identifies risks and gaps associated with current system constraints. May provide technical guidance for database administrators and software developers.

      Requirements:
      Duration: Hiring Manager is wanting to hire direct. Candidates must know this position could end earlier than 90 days if Client finds direct hires. Hiring Manger would be interested in contract to direct placement.

      Shift: 1st
      Little to no OT
      No traveling involved
      No Per Diem

      Must have a Bachelor's degree or better.

      Desired Skills:

      · Excellent presentation and facilitation skills

      · Able to work independently and efficiently to meet deadlines

      · Able to multi-task multiple priorities in a fast-paced environment

      · Self motivated, detail-oriented and excellent organizational and time management skills

      · Team player with a ‘can-do’ positive attitude

      · Able to coordinate deployments at multiple work sites – including international

      · Strong knowledge of enterprise IT architectures, web services, and web protocols

      · Ability to create robust and scalable high volume mobile applications, developing prototypes quickly.

      · Citrix XenApp, XenDeskop, and XenMobile for application delivery, virtualization, and containerization

      · Citrix Netscaler or comparable load balancing and micro-VPN infrastructure

      · Familiarity with industry security requirements such as FIPS, NIST, and EAR/ITAR

      · Familiarity with mobile communication apps and methods, including Exchange, Outlook, Skype for Business

      · Popular mobile platforms, including iOS, Android, ChromeOS

      Qualifications:

      · Bachelor or Master Degree: Engineering, Computer Science or other technical discipline

      · 5-10 years of overall mobile architecture experience

      · Knowledge of IT architecture of multi-sites and enterprise-wide IT solutions

      Understanding of Lean, Six Sigma, and supply chain principles
      FOSTER DESIGN'S BENEFITS:
      • Working for a 53-year old company
      • Minimum 6 Paid Holidays
      • Blue Cross Blue Shield – Group Medical Insurance Plan
      • MetLife – Long Term Disability Insurance
      • Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
      • Vacation Pay
      • Paid Weekly (Direct Deposit)
       
      Job Number: FD-501560KS
      Job Location: Wichita, KS
      Rate: $BOE/HR
      Per Diem: No
      Overtime: No much, if any
      Duration: 6 months
      Start Date: 07/07/2017
      Input Date: 06/28/2017
      Firm Name: FOSTER DESIGN INC
      Attention: Recruiter
      Address: 200 W DOUGLAS AVE STE 110
      City, State: WICHITA, KS 67202
      Phone: 316/832-9700
      800 Phone: 800/345-3394
      Fax Phone: 316/832-9357
      Email: contract@fosterdes.com
      Website: www.fosterdes.com

      Fabrication Technician

      Description:
      PDS Tech, Inc is seeking a candidate for the Fabrication Technician position located in Beltsville, MD.  
      The Assembly Technician position will provide mechanical technician support for the manufacturing of integrated products in our composite structures assembly area. This involves the assembly of hardware to consolidated, honeycomb panels and structures. 
      Minimum Requirements: 
      • HS diploma or equivalent (education will be verified) 
      • Minimum 2 years previous fabrication / honeycomb panel and structure assembly or aerospace mechanical assembly experience. 
      • Experience in an aerospace and/or manufacturing environment preferred. 
      • Mechanical aptitude to include the ability to read and interpret drawings. 
      • Familiarity with hand tools and good math/geometry skills. 
      • Candidate must be able to read, write and follow written manufacturing instructions and technical procedures in English. 
      • Must work closely with lead technicians and supervisor to meet build requirements and schedules. 
      • Must have experience / be able to operate equipment such as hand tools and power tools (rivet shavers, rivet tools, torque wrenches, drills) and precision measuring tools (micrometers, scales) for processing metals and wood. 
      • Ability to lift up to 50 lbs. 
      • Ability to stand for long periods of time. 
      • Demonstrates high level of concern for safety of self and others. 
      • Willing to work flexible schedules as needed to meet delivery dates. 
      Preferred Skills: 
      • Previous fabrication (honeycomb panel and structures assembly) experience in aerospace manufacturing environment. 
      • Experience preparing/mixing epoxy and silicone adhesives for mechanical and thermal component installation in honeycomb panels. 
      • Experience handling hazardous materials utilizing PPE (Personal Protective Equipment) in accordance with OSHA and industry standards. 
      • Computer skills including MS Word and Excel are a plus. 
      Competencies for Success: 
      • Successful candidate will be a team player with a strong desire to work in a fast-paced, professional manufacturing environment 
      • Ability to follow instructions, plan work, and manage time appropriately 
      • Ability to follow safety procedures 
      • Demonstrates a positive attitude and strong work ethic 
      • Works with a high degree of accuracy and attention to detail 
      • Ability to arrive and report to work on-time, as scheduled 
       
      Job Number: 1710068928
      Job Location: Beltsville, MD
      Duration: 6 months
      Input Date: 06/02/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: David Goodman
      Address: 1839 S ALMA SCHOOL RD STE 250
      City, State: MESA, AZ 85210
      Phone: 480/929-9922
      800 Phone: 800/657-0997
      Fax Phone: 480/929-9779
      Email: cecjphoenix@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002JtHI&URLSource=cjhunter

      Field Engineer II - Secret Clearance

      Description:
      PDS Tech is seeking a candidate for the Field Engineer II- Secret Clearance position located Sand Diego, CA. 
      The In-service Shipboard Systems Engineer will have the knowledge and skill sets necessary to support the LPD Program in executing the Life-Cycle Engineering and Support (LCE&S) Contract activities on all LPD in-service ships.
      These LPD17 Class In-service ships are currently home-ported in San Diego, CA; Norfolk, VA; Mayport. FL; and Sasabo, Japan; additional future home-ports are possible.
      Travel up to 50% of the time in support of the Navy’s directed Ship’s Availability and emergent support requests.
      Assignments may include Ship Trials, Ship sail away, and Sea Trials for duration's up to a month on rare occasions 

      The In-service System Engineer will be responsible for supporting the following tasking: 
      · Support in-port and underway events on-board the LPD17 Class ships including System support, troubleshooting, installation, and crew training for Shipboard Wide Area Network (SWAN), Magnetic Signature Control System (MSCS), Navigation Data Distribution System (NDDS), Computer Information Display System (CIDS), Integrated Voice Networks (IVN), and other systems as required 

      · Ability to work with Ship’s Force at all levels in order to provide distant support/troubleshooting of hardware and software for the various Raytheon systems
      Required Skills:
      (4+) years - Experience working in any of the following areas: shipboard networking communications, navigation, command and control and/or integrated electronic control systems Experience with electronic navigation and/or network communication systems
      Experience with hardware/software installations and troubleshooting - in a shipyard and/or shipboard environment
      Currently holds or able to obtain an interim security clearance within 30 days

      Desired Skills:
      Knowledge of integrated communications networks, including working knowledge of network servers, switches and Internet Protocols (IPs) Working knowledge of Information Assurance (IA), and of recent advancements in cyber security
      Familiarity with fundamental concepts of core Whole Life Engineering and Life Cycle Sustainment disciplines
      Demonstrated effectiveness in work prioritization in a dynamic environment
      Experience in working aboard Navy ships both in-port and underway to accomplish shipboard testing and troubleshooting of various interconnecting systems
      Experience in the design/development and/or testing of electronic systems
      Experience in work-planning and tasking to established budgets and schedules
      Knowledge of  LPD 17 Class integrated shipboard electronic systems (MSCS, SWAN, ECS, SCS, IVDS, CIDS, SPS-73, IVN, & NDDS)
      Familiarity with logistic support products
      Familiarity with the SHIPMAIN maintenance and modernization process.
      Familiarity with the Ships Self Defense System (SSDS)
      Working knowledge of activities of a Regional Maintenance Center, and other Navy waterfront resources
      Working knowledge of planning yard maintenance and modernization documentation
      Relevant knowledge and understanding of the duties of Ships Force officers Technical team leadership experience in a cross functional team
      Familiarity with the principles of Systems Engineering and Systems Integration to the extent of proposing engineering upgrades in response to technical systemic problems, component obsolescence and/or the emergence of new and superior technologies.
      Excellent verbal and written communication skills
      Ability to communicate and make presentations to Industry and Navy staff members
      Working knowledge of Integrated Voice Networks (IVN) 
      Education (including Major): Bachelor's degree or multiple years of relevant field experience may be considered in lieu of a degree. (Two years related work experience can substitute for one year of education)
       
      Job Number: 1610058264
      Job Location: San Diego, CA
      Duration: 6 months
      Input Date: 04/17/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Terry Brooke
      Address: 1839 S ALMA SCHOOL RD STE 250
      City, State: MESA, AZ 85210
      Phone: 480/929-9922
      800 Phone: 800/657-0997
      Fax Phone: 480/929-9779
      Email: cecjphoenix@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002Fj5M&URLSource=cjhunter

      Fire Protection Test & Analysis Engineer

      Description:

      SUMMARY JOB DESCRIPTION



      -The primary work location will be in Nagoya, Japan. However, depending on the positions applying for, a successful candidate may be required to travel to Moses Lake (WA, USA) and other test sites and stay there where aircraft flight tests are performed on a long term basis.



      -Basic scope of work is to provide assurance of successful showing of compliance with relevant regulatory requirements in the Type Certification Application and Approval processes with regard to fire extinguishing and smoke detection.



      -The main duties and responsibilities of a successful candidate will include having overall responsibility for the planning of the required flight/ground test phases, working with the flight/ground test instrumentation engineers, preparing the maneuver-by-maneuver plan for each test flight or test on ground and develop/review test plans, test specifications and test reports



      -A successful candidate is expected to work flexibly and effectively in a multi-cultural and multi-linguistic environment in Nagoya, Headquarter of our company in Japan. Basic Japanese Language skill is preferable but not required.


      COMMON QUALIFICATIONS



      -Bachelor’s Degree in Engineering with 15 years of aviation related industry experience, or



      -15-20 years in an aviation engineering organization; Aerospace or Aircraft Systems Engineering.



      -Must have excellent written and verbal communication skills in English.



      -Ability to demonstrate interpersonal and communication techniques



      -A good team player who can work in a team environment and coordinate with other engineers from culturally and linguistically diverse backgrounds.



      -Ability to identify potential issues in the course of Type Certification approval process.



      -Ability to adapt successfully to changing situations and environments



      -Ability to dealing with changing priorities and workloads



       



      JOB-RELATED QUALIFICATIONS



      -Thermal analysis
      -Good thermal dynamic background
      -Modeling thermal dynamic, making specification/documentation, request document, required definition report good solution for over heat and under cooling issues, ground/flight test for environment temperature of all aircraft zone such as unpressured area, pressure area, and propulsion area 
      -CFD
      -Good communication in structure engineering


       
      Job Number: 1610058856
      Job Location: Nagoya,
      Duration: 36 months
      Input Date: 03/10/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chad Dunavant
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002FmfQ&URLSource=cjhunter

      HVAC/Mechanical Engineer

      Description:

      Primary Responsibilities:



      Candidate will be responsible for leading projects, defining scope and responsibilities, leading a team of engineers/designers



      Must ensure deliverables meet the scope and client expectations 



      Support procurement activities, including coordination with vendors and vendor drawing reviews



      Support contractor reviews, and installation planning activities



      Individual will travel globally for machine installation, check out and start up



      Candidate will plan the work, and track and report work in progress



      Will lead a design team for projects, and work with other disciplines to assure the project design is complete and accurate


      Qualifications:



       



      BS or MS in Mechanical or Chemical Engineering required



      7 to 10 years of related experience is required. Experience with an engineering consulting firm is a plus.



      Candidate should possess good experience on HVAC systems, utilities and fire systems design



      Knowledge of design problems of civil and industrial area of various kinds and, possibly, related to fire protection it would be considered an asset 



      Experience in setting, development, evaluation and implementation of projects for air conditioning systems, generation and distribution utilities in the industrial and civil sectors



      Knowledge of issues related to the pharmaceutical, consumer products, and chemical industry would be an advantage



      Knowledge of boiler systems is preferred



      Candidate must be able to calculate heat balance, air balance, mass balance, line sizing, and duct sizin



      Knowledge of international standards such as ASME, AMCA, ASHRAE , SMACNA ACGIL are required



      Should be able to select and size the boilers, fans, coils, duct, and other HVAC elements



      Candidate must possess good communication skills and be able to successfully interact with clients on global project



      Microsoft Office experience is required



      AutoCAD and SolidWorks experience is preferred



      Domestic and international travel will be required


       
      Job Number: 1610057836
      Job Location: Green Bay, WI
      Duration: 4 months
      Input Date: 10/06/2016
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Sue Van Pay
      Address: 110 PACKERLAND DR STE A
      City, State: GREEN BAY, WI 54303
      Phone: 920/499-9943
      800 Phone: 800/333-1389
      Fax Phone: 920/499-9067
      Email: cecjgreenbay@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002FhcT&URLSource=cjhunter

      HYDRAULIC/MECH. FLT CONTROLS - Grade 07

      Description:
      PDS Tech, Inc. is seeking a candidate for the HYDRAULIC/MECH. FLT CONTROLS - Grade 07 position located in Stratford, CT. 

      Purpose: 

      Provide mechanical design administrative support to the Hydraulics and Mechanical Controls team on the 53K program. 

      Job Duties: 
      1. Developing design change notices, supporting engineer change requests. 
      2. Tracking engineering design changes through the entire release process. 
      3. Supporting supplier managers and cost account manager utilizing the client's EV system. 
      Education: 
      Bachelors' Degree in Engineering Design required 
      10-15 years experience in the Aerospace industry is required. 

       
       
      Job Number: 1710069521
      Job Location: Stratford, CT
      Duration: 3 months
      Input Date: 06/16/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Ryan Bushey
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002Cm4Q&URLSource=cjhunter

      Hardware Engineer Sr

      Description:
      Hardware Engineer Sr
      Moorestown, NJ
      1 Year Contract
      $45.00-65.00/Hr

      MUST HAVE AN ACTIVE SECRET CLEARANCE

      Description

      Hardware engineer experienced with the selection, utilization, integration and test of COTS processors, switches and routers, VME modules and sub-assemblies. Support manufacturing build and test at component through system test levels.


      Skill/Experience/Education

      Mandatory:

      BS Degree in Electrical Engineering or Electrical and Computer Engineering. Minimum of 6 years of professional level experience. Demonstrated experience supporting the production build and test and debug of complex commercial systems containing items such as Cisco Switches, Routers, VME based modules. Also demonstrated experience installing and rebuilding commercial operating systems such as VxWorks, Red Hawk Linux, Windows and COTS equipment proprietary operating environments. Experience in testing and debugging various military and industry standard interface types including FDDI, Fast Ethernet, Gigabit Ethernet, NTDS A/B, NTDS E, and NTDS D. Experience and proven superior performance in the use of commercial real time operating systems and development environments including Tornado / VxWorks and Concurrent Power MAX. Experience with or strong academic background in System Networking. Experience with writing Unix shell or Tera Term scripts for test automation. Hands on experience working in an integration and test environment and production environment. Knowledgeable in the use of digital and network test equipment. Experience developing and executing factory acceptance test procedures. Experience as a Network Systems Engineer with Linux based OS System Administrator skills. Willingness to perform physical tasks relating to movement of test gear, packing and carrying equipment boxes. Willing to travel occasionally for brief periods of time. And willingness to support shift work to meet test resource requirements.

      Desired:

      MS Degree in Electrical Engineering or Electrical and Computer Engineering.
       
      Job Number: 7475
      Job Location: Moorestown, NJ
      Rate: $45.00-65.00/Hr
      Per Diem: Possible Split
      Overtime: Possible
      Duration: 1 Year
      Start Date: ASAP
      Input Date: 05/30/2017
      Firm Name: INCONEN CORPORATION
      Attention: Brad
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Email: brad@inconen.com
      Website: www.inconen.com

      Hardware Engineer Sr (2) - NJ - C

      Description:
      Chipton-Ross is seeking a Hardware Engineer Sr for an opening in Cherry Hill, NJ.

      RESPONSIBILITIES:
      Hardware engineer experienced with the selection, utilization, integration and test of COTS processors, switches and routers, VME modules and sub-assemblies. Support manufacturing build and test at component through system test levels.

      REQUIRED EXPERIENCE:
      -BS Degree in Electrical Engineering or Electrical and Computer Engineering.
      -Minimum of 6 years of professional level experience. -Demonstrated experience supporting the production build and test and debug of complex commercial systems containing items such as Cisco Switches, Routers, VME based modules.
      -Also demonstrated experience installing and rebuilding commercial operating systems such as VxWorks, Red Hawk Linux, Windows and COTS equipment proprietary operating environments. -Experience in testing and debugging various military and industry standard interface types including FDDI, Fast Ethernet, Gigabit Ethernet, NTDS A/B, NTDS E, and NTDS D.
      -Experience and proven superior performance in the use of commercial real time operating systems and development environments including Tornado / VxWorks and Concurrent Power MAX. -Experience with or strong academic background in System Networking.
      -Experience with writing Unix shell or Tera Term scripts for test automation.
      -Hands on experience working in an integration and test environment and production environment.
      -Knowledgeable in the use of digital and network test equipment. -Experience developing and executing factory acceptance test procedures.
      -Experience as a Network Systems Engineer with Linux based OS System Administrator skills.
      -Willingness to perform physical tasks relating to movement of test gear, packing and carrying equipment boxes.
      -Willing to travel occasionally for brief periods of time. And willingness to support shift work to meet test resource requirements.

      PREFERRED EXPERIENCE:
      MS Degree in Electrical Engineering or Electrical and Computer Engineering.

      EDUCATION:
      Accredited High School Diploma/GED

      WORK HOURS:
      5/40, 1st Shift

      MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

       
      Job Number: 163559
      Job Location: Cherry Hill, NJ
      Rate: $45 to $65.00 DOE
      Duration: 12 Months
      Input Date: 05/30/2017
      Firm Name: CHIPTON ROSS
      Attention: Brenda Ordaz
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: bordaz@chiptonross.com
      Website: www.chiptonross.com

      Hardware Engineer Sr- SECRET

      Description:
      PDS Tech, Inc. is seeeking a Hardware Engineer Sr. for an open position in Moorestown, NJ.
      Job Description: 
      • Hardware engineer experienced with the selection, utilization, integration and test of COTS processors, switches and routers, VME modules and sub-assemblies.
      • Support manufacturing build and test at component through system test levels.
      • Candidate MUST possess an ACTIVE SECRET clearance!

      Mandatory Skills:
      • BS Degree in Electrical Engineering or Electrical and Computer Engineering.
      • Minimum of 6 years of professional level experience.
      • Demonstrated experience supporting the production build and test and debug of complex commercial systems containing items such as Cisco Switches, Routers, VME based modules.
      • Also demonstrated experience installing and rebuilding commercial operating systems such as VxWorks, Red Hawk Linux, Windows and COTS equipment proprietary operating environments.
      • Experience in testing and debugging various military and industry standard interface types including FDDI, Fast Ethernet, Gigabit Ethernet, NTDS A/B, NTDS E, and NTDS D.
      • Experience and proven superior performance in the use of commercial real time operating systems and development environments including Tornado / VxWorks and Concurrent Power MAX. 
      • Experience with or strong academic background in System Networking.
      • Experience with writing Unix shell or Tera Term scripts for test automation.
      • Hands on experience working in an integration and test environment and production environment.
      • Knowledgeable in the use of digital and network test equipment.
      • Experience developing and executing factory acceptance test procedures.
      • Experience as a Network Systems Engineer with Linux based OS System Administrator skills.
      • Willingness to perform physical tasks relating to movement of test gear, packing and carrying equipment boxes.<br/><br/>Willing to travel occasionally for brief periods of time. And willingness to support shift work to meet test resource requirements.<br/>



      Desired Skills:

      • MS Degree in Electrical Engineering or Electrical and Computer Engineering. 

       
      Job Number: 1710068815
      Job Location: Moorestown, NJ
      Per Diem: No
      Duration: 12 months
      Input Date: 06/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Earl Sawyer
      Address: 2154 N CENTER ST STE 405D
      City, State: NORTH CHARLESTON, SC 29406
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002Jrye&URLSource=cjhunter

      Hardware Systems Engineer

      Description:
      A Leading Aerospace company, located in Jupiter, FL, is seeking a Specialist Systems Engineer IV, for a 6+ month contract role.

      ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

      ** Candidates must have dedicated Hardware experience (not looking for Software or Electrical engineers) **

      Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
      Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
      Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
      Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
      Represents the organization in conferences to resolve important questions and to plan and coordinate work.
      May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date. Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
      Develops solutions to complex problems which require the use of ingenuity and creativity.
      Work is reviewed at extended intervals for desired results and achievement.
      Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

      Duties:
      -60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates
      requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.

      -15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.

      -15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.

      -10% - Communicates results in oral presentations and written communication.

      Skills:

      Nine years minimum directly related industry experience in Systems Engineering disciplines (requirements development and management, risk management, and system integration) across the full product development life-cycle for aerospace/rocket propulsion system design and development.
      Experience with requirements management software (IBM Rational DOORS, IBM Requisite Pro, etc.).
      Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level (requires U.S. Citizenship).

      Education:

      Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace).
      Advanced degree desirable.
      Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.
       
      Job Number: 11859
      Job Location: Jupiter, FL
      Rate: Open
      Per Diem: Yes
      Overtime: Possible
      Duration: 6 Months+
      Start Date: June
      Input Date: 05/15/2017
      Firm Name: LOGIN CONSULTING SERVICES
      Attention: John Dillon
      Address: 300 CONTINENTAL BLVD STE 530
      City, State: EL SEGUNDO, CA 90245-5067
      Phone: 310/607-9091
      Fax Phone: 310/607-9818
      Email: john.dillon@loginconsult.com
      Website: www.loginconsult.com

      ISSO Security Analyst

      Description:
      A leading Aerospace company, located in Gainesville, VA, is seeking a ISSO Security Analyst for a contract thru 12/31/17+.

      ** An active SECRET (or higher) DoD Security Clearance is required **

      ** A current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP) is required **

      -The ISSO is responsible for ensuring the appropriate operational security posture is maintained for an information system (IS) and as such, works in close collaboration with the Information System Security Manager (ISSM).

      -The ISSO shall have the detailed knowledge and expertise required to manage the security aspects of an IS and is assigned responsibility for the day-to-day security operations of a system.

      -Responsibilities also include physical and environmental protection, personnel security, incident handling, and security training and awareness.

      -In close coordination with the ISSM, the ISSO plays an active role in monitoring a system and its environment of operation to include developing and updating the System Security Plan (SSP), managing and controlling changes to the system, and assessing the security impact of those changes.

      Responsibilities of the ISSO include, but are not limited to:

      a. Ensure systems are operated, maintained, and disposed of in accordance with security policies and procedures as outlined in the security authorization package;

      b. Attend technical and security training (e.g., operating system, networking, security management) relative to assigned duties;

      c. Ensure all users have the requisite security clearances, authorization, need-to-know, and are aware of their security responsibilities before granting access to the IS;

      d. Report all security-related incidents to the ISSM;

      e. Conduct periodic reviews of ISs to ensure compliance with the security authorization package;

      f. Serve as member of the CCB, if designated by the ISSM;

      g. Coordinate any changes or modifications to hardware, software, or firmware of a system with the ISSM prior to the change;

      h. Formally notify the ISSM when changes occur that might affect system authorization;

      i. Monitor system recovery processes to ensure security features and procedures are properly restored and functioning correctly;

      j. Ensure all IS security-related documentation is current and accessible to properly authorized individuals;

      k. Ensure audit records are collected and reviewed; and

      l. ISSO shall be adequately trained and possesses technical competence commensurate with the complexity of the ISs.
      Skills:

      Minimum Qualifications

      - Current SECRET (or higher) DoD Security Clearance

      - Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)

      - Experience with Microsoft Windows and/or Linux system administration (2+ years)

      - Familiarity with configuration control and change management (SCCM)

      - Experience with networking concepts (switches, network security, TACLANE)

      - Experience with security concepts (Data Loss Prevention, Active Directory, and Security Log Analysis)

      - Active and continuous learner - either higher education or Continuing Professional Education



      Required Competencies

      - Strong written and verbal communication skills; ability to present reports to management; motivated to thoroughly investigate, analyze, and document system issues and resolutions

      - Ability to produce quality deliverables and to complete assigned projects on time; provides consistent status updates to ensure IT security projects stay focused

      - Consistent attention to detail - completes tasks per standard operating procedures; reports discovered anomalies and inconsistencies

      - Persistent and creative problem solver - strong troubleshooting skills and determined to find solutions to technical problems; identifies root cause and presents possible solutions to management

      - Strong work ethic and a proven professional - respectful, dependable, takes initiative and follows through, dedicated to excellence and getting the job done

      Preferred Competencies

      - Operating System and networking certifications

      - Knowledge of and experience with compliance to government regulations and standards (NIST Special Publications, NISPOM, Risk Management Framework, etc.)

      - Direct experience with a Department of Defense (DoD) or Defense Industrial Base (DIB) company supporting critical information systems

      Additional Details

      The ideal candidate for this position must be able to:

      - Report to work on time

      - Perform job duties for a specific duration of time or within a given period of time

      - Follow directions based on government requirements and company policies

      - Interact well with co-workers and customers

      - Accept constructive criticism

      - Maintain regular/consistent attendance and a full-time schedule

      - Maintain current status on projects

      - Stay current on training requirements

      - Solve issues and incidents in the field and be willing to work after hours as needed to complete an urgent and important task

      - Effective service depends upon the contractors performing duties to the best of their abilities; frequent absences will disrupt business operations and create additional work for coworkers; prompt and regular attendance is critical to the success of the company's mission.


      Education:

      - Undergraduate degree in Information Technology or Cyber Security, but candidate with proven experience will not be excluded from consideration

      - Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)
       
      Job Number: 12244
      Job Location: Gainesville, VA
      Rate: Open
      Per Diem: Yes
      Overtime: Possible
      Duration: 1 Year+
      Start Date: October
      Input Date: 09/21/2017
      Firm Name: LOGIN CONSULTING SERVICES
      Attention: Zachary Eggers
      Address: 300 CONTINENTAL BLVD STE 530
      City, State: EL SEGUNDO, CA 90245-5067
      Phone: 310/607-9091
      Fax Phone: 310/607-9818
      Email: zachary.eggers@loginconsult.com
      Website: www.loginconsult.com

      Image Processing Algorithm Engineer - OH

      Description:
      Chipton-Ross is seeking a Image Processing Algorithm Engineer for an opening in Mason, OH.

      RESPONSIBILITIES:
      Research and develop advanced image processing and computer vision algorithms, such as image restoration, scene segmentation, target detection, and data fusion.
      Utilize an expertise and training in real-time coding methods, architectures and languages to implement advanced algorithms as highly optimized code in real-time processors.
      Participate in development teams that design and implement real-time image processing for military systems. Teams may span multiple client companies.
      Assist in designing image processing system architectures and evaluating image processing algorithms.
      Identify cutting-edge image processing or computer vision algorithms that can enhance new or existing imaging systems

      REQUIRED EXPERIENCE:
      Minimum 3 years industry and/or research experience developing algorithms for image/video processing, pattern recognition and computer vision applications.
      Expertise in machine learning, object detection and estimation, video fusion, image restoration and scene segmentation algorithms.
      Experience in system or computer vision modeling, simulations and algorithm performance evaluation.
      Algorithm prototyping and performance evaluation in Matlab and/or Python.
      Algorithm implementation in a high level language (C/C++/Java).

      PREFERRED EXPERIENCE:
      An understanding of imaging sensors in any domain Visible, IR, UV, X-ray, CT, Ultrasound etc.
      Experience in real-time programming, parallel and distributed computing, CUDA and VHDL.
      Experience in Visual Studio and Qt on Windows and Linux platforms.
      Experience with Altera or Xilinx development tools.
      Experience in software/firmware development life cycles.

      EDUCATION:
      MS in Electrical Engineering / Computer Engineering / Computer Science / Physics or Mathematics with 3 years experience.

      WORK HOURS:
      9/80, 1st Shift, Fulltime
       
      Job Number: 163830
      Job Location: Mason, OH
      Rate: $70 to $90.00 DOE
      Duration: 12 Months
      Input Date: 06/13/2017
      Firm Name: CHIPTON ROSS
      Attention: Kevin Suk
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: ksuk@chiptonross.com
      Website: www.chiptonross.com

      Implementation Engineer _ Telecommunications Engineer - II

      Description:
      PDS Tech is seeking a candidate for the Implementation Engineer- Telecommunications Engineer- III position located in Richardson, TX.  
      Candidate must have an in-depth and hands on understanding of IP telephony to include a background in multicasting deployments.
      Ability to configure Cisco routers (ASR9K, 7600, 4500X, etc.) and performance monitoring equipment including Endace probes, ‘Creanord NIDs and Accedian NIDs is also a requirement of this position.
      A knowledge of the Financial industry is desirable and considered a plus.
      L2 and L3 MPLS network design experience is also required.
       
      ​ A minimum of 10 years of IP networking experience and an engineering degree or equivalent experienced is a priority for this position.
       
      Job Number: 1710063354
      Job Location: Richardson, TX
      Duration: 6 months
      Input Date: 03/09/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Gabriel Virata
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002GAln&URLSource=cjhunter

      Industrial Engineer

      Description:
      -Holiday Pay
      -Medical
      -Dental
      -Vision
      -Short-Term Disability
      -Direct Deposit
      -401(k) Immediate Enrollment
      -Annual Bonus
      -Referrals
      -Personal Communications
       
      Input Date: 01/23/2017
      Firm Name: AGENTE TECHNICAL
      Attention: Alexa Bui
      Address: 714 CENTERPARK DR STE 140
      City, State: COLLEYVILLE, TX 76034-2852
      Phone: 972/415-4545, 817/354-5555
      800 Phone: 866/758-2494
      Email: resumes@agentetech.com
      Website: www.agentetech.com

      Industrial Engineer 3

      Description:
      Industrial Engineer 3

      Location: New Orleans, LA
      Duration: 1+ years

      Job Description:
      The client is seeking an experienced Industrial Engineer to join the team in New Orleans, Louisiana. This position offers an exciting opportunity to support the NASA Space Launch System Core Stage and Exploration Upper Stage production based at the NASA Michoud Assembly Facility. The Michoud Assembly Facility is the home of the production program for the Space Launch System.

      The ideal candidate will have experience:
      - Performing and/or developing Process Management, Process Measurement, Performance Metrics, Root Cause Analysis, Project Management, Lean Manufacturing, Manufacturing Operations (Support), Business Case Analysis, Forecasting, Resource Scheduling and Constraint Based Scheduling, Operating Plans, Supply Chain and Manufacturing
      - Proficiency and experience using Microsoft Office suite including MS Project.

      Candidate must be able to:
      - Support a rotating shift (Rotating shifts first and/or second) are required to support production as needed.
      - Interact with employees to gather data for process development and improvements. This may include observing and documenting processes, and collecting data in manufacturing areas or in assemblies during various production phases.
      - This position requires the ability to walk, stand, and enter into work areas via steps or ladders as needed. Candidate may be in proximity to chemicals when observing/gathering data in an area in the factory where chemicals are in use.

      The position required the use of advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods to develop optimal process designs and efficient utilization of resources in the creation and validation of products. Analyzes and designs value stream, including capability, capacity, throughput, work flow and logistics.

      Education / Experience:
      Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification.
       
      Job Number: 17-09334:
      Job Location: New Orleans, LA
      Rate: Open
      Per Diem: Yes
      Duration: 12 months
      Start Date: Asap
      Input Date: 08/24/2017
      Firm Name: ICONMA LLC
      Attention: Mohamed Zoheb
      Address: 850 STEPHENSON HWY STE 612
      City, State: TROY, MI 48083
      Phone: 248/602-3856
      Email: mzoheb@iconma.com
      Website: iconma.com

      Industrial Engineer 3

      Description:
      PDS Tech is seeking an Industrial Engineer for an open position in New Orleans, LA.
      In your role you will:

      • Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers).
      • Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements.
      • Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization.
      • Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation).
      • Ensures project is completed within budget.
      • Utilizes advanced engineering methods to develop optimal process designs and efficient utilization of resources in the creation and validation of products.
      • Analyzes and designs value stream, including capability, capacity, throughput, work flow and logistics.
         

      Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification.
       
      Job Number: 1710068518
      Job Location: New Orleans, LA
      Duration: 12 months
      Input Date: 05/23/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Rebecca Burrows
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002Jq63&URLSource=cjhunter

      Industrial Engineer II

      Description:
      Industrial Engineer II

      Location: Savannah
      Rate: $35.00 - $38.00/HR
      Duration: Long Term contract
      Shift: 1st Shift


      Unique Skills:
      * Shop floor layout (6S)
      * Maintenance ground support experience.


      Education and Experience Requirements:
      Bachelor’s degree in Industrial, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience. Proven knowledge of Lean and/or Six Sigma principles. Three (3) years Industrial Engineering, Manufacturing Engineering, or related technical experience. Ability to read and interpret blueprints and facility layouts. Ability to operate personal computers, CAD systems, and appropriate software.


      Position Purpose:
      Under minimal supervision, provides Industrial Engineering support through the application of classical and Lean Industrial Engineering principles. Assures assigned projects are accomplished within projected or approved cost.

      Principal Duties and Responsibilities:
      Essential Functions: 1. Perform all activities necessary to support assigned area, providing timely response to all requests. Assure assigned projects are accomplished within projected time and approved costs. 2. Prepare and submit necessary paperwork for equipment, machinery, and facilities acquisition including justifications and economic analysis. 3. Initiate and implement cost reduction programs. 4. Implement plant layout, process flow, and material handling techniques 5. Maintain and submit daily/weekly/monthly activity reports and project status. 6. Investigate, evaluate, and implement facilities expansions, department rearrangements, new technologies and manufacturing techniques, employee suggestions, and make-or-buy proposals. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of IE policies and procedures. 8. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 9. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 10. Support all Safety, Sustainability and Ergonomic initiatives as required.

      Additional Functions: 1. Develop and maintain work place methods and manpower requirements. 2. Assist in the training and development of entry-level industrial engineering personnel. 3. As required, aid in development and maintenance of Business Continuity Plan. 4. Perform other duties as assigned.
       
      Job Number: 7303
      Job Location: Savannah, GA
      Rate: $35.00 - $38.00/HR
      Per Diem: Possible
      Overtime: Possible
      Duration: LT
      Input Date: 04/12/2017
      Firm Name: INCONEN CORPORATION
      Attention: Patrick O'Neil
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Email: patrick@inconen.com
      Website: www.inconen.com

      Industrial Engineer III (AZ)

      Description:
      Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

      Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

      We also offer full medical, dental, vision, and 401k.
       
      Job Number: IEaz
      Job Location: Mesa, AZ
      Rate: up to $46/hour
      Per Diem: YES
      Overtime: Possible
      Duration: 6+ Months
      Start Date: ASAP
      Input Date: 05/09/2017
      Firm Name: AMERICAN CYBERSYSTEMS
      Attention: Janice Plattner
      Address: 1750 112TH AVE NE STE C228
      City, State: BELLEVUE, WA 98004
      Phone: 425/605-2321
      Fax Phone: 425/558-0688
      Email: janice.plattner@acsicorp.com
      Website: www.acsicorp.com

      Industrial Engineer III (LA)

      Description:
      SEVERAL OPENINGS

      The ideal candidate will have experience:
      - Performing and/or developing Process Management, Process Measurement, Performance Metrics, Root Cause Analysis,
      Project Management, Lean Manufacturing, Manufacturing Operations (Support), Business Case Analysis, Forecasting,
      Resource Scheduling and Constraint Based Scheduling, Operating Plans, Supply Chain and Manufacturing
      - Proficiency and experience using Microsoft Office suite including MS Project.
      Candidate must be able to:
      - Support a rotating shift (Rotating shifts first and/or second) are required to support production as needed.
      - Interact with employees to gather data for process development and improvements. This may include observing and
      documenting processes, and collecting data in manufacturing areas or in assemblies during various production phases.
      - This position requires the ability to walk, stand, and enter into work areas via steps or ladders as needed. Candidate may
      be in proximity to chemicals when observing/gathering data in an area in the factory where chemicals are in use.

      The position required the use of advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods to develop optimal process designs and efficient utilization of resources in the creation and validation of products. Analyzes and designs value stream, including capability, capacity, throughput, work flow and logistics.

      Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification.
       
      Job Number: IEIIILA
      Job Location: New Orleans, LA
      Rate: OPEN
      Per Diem: YES
      Overtime: Possible
      Duration: 12+ Months
      Start Date: ASAP
      Input Date: 09/08/2017
      Firm Name: AMERICAN CYBERSYSTEMS
      Attention: Janice Plattner
      Address: 1750 112TH AVE NE STE C228
      City, State: BELLEVUE, WA 98004
      Phone: 425/605-2321
      Fax Phone: 425/558-0688
      Email: janice.plattner@acsicorp.com
      Website: www.acsicorp.com

      Industrial Engineers

      Description:
      Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience.
      Project: Shop support. Will be working on Rate Readiness, tool improvements and metrics.
      SAP & Proficient with MS Excel
       
      Job Number: Ind-KS
      Job Location: Wichita, KS
      Rate: 50.00
      Per Diem: Possible
      Overtime: Possible
      Duration: LT
      Start Date: ASAP
      Input Date: 06/12/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Mary Ann McCarthy
      Address: 1215 FERN RIDGE PKWY STE 231
      City, State: ST LOUIS, MO 63141
      Phone: 314/628-9143
      800 Phone: 800/472-3737
      Fax Phone: 314/628-9485
      Email: mmccarthy@pdstech.com
      Website: www.pdstech.com

      Industrial Engineers - Many Needed

      Description:
      *Must be Degreed
      *Performing and/or developing Process Management, Process Measurement, Performance Metrics, Root Cause Analysis,
      Project Management, Lean Manufacturing, Manufacturing Operations (Support), Business Case Analysis, Forecasting,
      Resource Scheduling and Constraint Based Scheduling, Operating Plans, Supply Chain and Manufacturing
      - Proficiency and experience using Microsoft Office suite including MS Project.
      Candidate must be able to:
      - Support a rotating shift (Rotating shifts first and/or second) are required to support production as needed.
       
      Job Number: BO-LA-Ind.
      Job Location: New Orleans, LA
      Rate: $50.00-$52.00/hour
      Per Diem: Possible
      Overtime: Possible
      Duration: 12 Months+
      Start Date: ASAP
      Input Date: 07/12/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Mary Ann McCarthy
      Address: 1215 FERN RIDGE PKWY STE 231
      City, State: ST LOUIS, MO 63141
      Phone: 314/628-9143
      800 Phone: 800/472-3737
      Fax Phone: 314/628-9485
      Email: mmccarthy@pdstech.com
      Website: www.pdstech.com

      Industrial Painter

      Description:
      Sprays surfaces of manufactured products such as piping and/or tanks, or working area with protective or decorative material such as paint, enamel, glaze, gel-coat, or lacquer by performing the following duties.  Cleans grease and dirt from product.  Applies masking tape over parts and areas that are not to be coated. Selects and mixes coating liquid to produce desired color. Pours coating liquid into spray container and connects gun to air hose. Turns sprayer valves and nozzle to regulate width and pressure of spray. Pulls trigger and directs spray onto work surface to apply prime or finish coat. Coats areas inaccessible to hand sprayer with brush. Cleans spraying equipment and brushes with solvent. Removes rust from metal with acid, wire brush, or steel wool.
       
      Must have industrial painting experience.
      2nd shift position.  Mon-Wed 5:00pm to 3:30am, Thurs 3:45pm to 2:15am
       
       
      Job Number: 1710066465
      Job Location: Kaukauna, WI
      Duration: 6 months
      Input Date: 05/26/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Tyler Belisle
      Address: 110 PACKERLAND DR STE A
      City, State: GREEN BAY, WI 54303
      Phone: 920/499-9943
      800 Phone: 800/333-1389
      Fax Phone: 920/499-9067
      Email: cecjgreenbay@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000021ir6&URLSource=cjhunter

      InfoSec Engineer

      Description:
      PDS Tech is seeking a InfoSec Engineer for an open position in Dallas TX

      • SIEM (Security Information and Event Management): Must have experience extracting pertinent security data, setting up SIEM solutions and troubleshooting connectivity issues.



      • Install and maintain SIEM, IPS, DLP and APT tools like RSA Netwitness, Cisco Sourcefire, McAfee DLP, Whole Disk Encryption, BeyondTrust, Shavlick, Cylance, Proofpoint Email Gateway, Skyhigh, Landesk MDM, BCWipe, Shavlick, Tripwire, Cloudvisory



      • Monitor system logs, SIEM tools and network traffic for unusual or suspicious activity. Interpret such activity and make recommendations for resolution with the help of InfoSec Team Lead
         



      • intrusion incidents, conduct forensic investigations, and mount incident responses



      • Collaborate to create robust authentication, authorization, and encryption solutions that can be verified to implement company's Information Security Policy



      • Evaluate new technologies and processes that enhance security capabilities in the areas of data classification and handling, DLP, IDS/IPS, end-point protection (mobile and desktop), monitoring, incident management, etc.



      • Ensure appropriate security access and protection against unauthorized access, modification, or destruction



      Qualifications and Education Requirements:



       
      BS required, preferably a degree in computer science, engineering, cyber security, or a related subject
      3-6 years' experience implementing Security solutions
       
       
       
      Hands on, direct experience with:
       
      Experience with a broad range of security technologies, including NextGen Firewalls, DLP, NAC, IDS/ IPS, IdAM, Certificate Management, SIEM, Endpoint Protection, Anti-malware, vulnerability management
      SIEM Technologies (RSA Netwitness, ArcSight, QRadar,etc)
      IDS/IPS, penetration and vulnerability testing
      Working experience with industry frameworks (ISO 27001, ISO 27002, NIST 800-171
      Strong knowledge of technology and security topics including network security, wireless security, application security, infrastructure hardening and security baselines, web server and database security
       
      Knowledge of network infrastructure, including routers, switches, firewalls, and associated


       
      Job Number: 1710069577
      Job Location: Dallas, TX
      Duration: 6 months
      Input Date: 06/19/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Richard Escobar
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002CmVs&URLSource=cjhunter

      InfoSec Engineer

      Description:
      PDS Tech is seeking a InfoSec Engineer for an open position in Dallas TX

      • SIEM (Security Information and Event Management): Must have experience extracting pertinent security data, setting up SIEM solutions and troubleshooting connectivity issues.



      • Install and maintain SIEM, IPS, DLP and APT tools like RSA Netwitness, Cisco Sourcefire, McAfee DLP, Whole Disk Encryption, BeyondTrust, Shavlick, Cylance, Proofpoint Email Gateway, Skyhigh, Landesk MDM, BCWipe, Shavlick, Tripwire, Cloudvisory



      • Monitor system logs, SIEM tools and network traffic for unusual or suspicious activity. Interpret such activity and make recommendations for resolution with the help of InfoSec Team Lead
         



      • intrusion incidents, conduct forensic investigations, and mount incident responses



      • Collaborate to create robust authentication, authorization, and encryption solutions that can be verified to implement company's Information Security Policy



      • Evaluate new technologies and processes that enhance security capabilities in the areas of data classification and handling, DLP, IDS/IPS, end-point protection (mobile and desktop), monitoring, incident management, etc.



      • Ensure appropriate security access and protection against unauthorized access, modification, or destruction




      • Understanding of encryption, hashing, secure random number generation, key derivation, digital signatures, etc.



      • Knowledge of network based, system level and application layer attacks and mitigation methods, and TCP/IP, HTTP/S, and related protocols.



      • Have working experience and knowledge of UNIX, and Linux (Redhat, Centos) operating systems and Windows 2012 & 2016 operating systems



      • Test security solutions using industry standard analysis criteria



      • Deliver technical reports and formal papers on test findings



      • Respond to information security issues during each stage of a project's/incident's lifecycle



      • Provide technical security advice



      • Implement or coordinate remediation required by audits, and document exceptions as necessary



      • Perform installation and configuration management of security systems and applications, including policy assessment and compliance tools, network security appliances and host-based security systems



      • Collate security incident and event data to produce monthly exception and management reports



      • Report unresolved network security exposures, misuse of resources or noncompliance situations using defined escalation processes.



      • Assist team members in the use of security tools, the preparation of security reports and the resolution of security issues.



      •  Research, recommend, evaluate and implement information security solutions that identify and/or protect against potential threats, and respond to security violations with the help of Infosec Team Lead



      •  Recommend, schedule and/or apply fixes, security patches and any other measures required in the event of a security breach



      • Tests and recommends security measures to reduce and mitigate risk
         



        BS required, preferably a degree in computer science, engineering, cyber security, or a related subject



       
      Job Number: 1710067125
      Job Location: Dallas, TX
      Duration: 7 months
      Input Date: 04/21/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Richard Escobar
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000021mjD&URLSource=cjhunter

      Information System Security Officer (ISSO) with active secret FL

      Description:
      159671/7222476
      Job Title: Information System Security Officer (ISSO)
      Keywords:
      Number of Positions: 1
      Remaining Positions: 1
      Duties: ** An active SECRET (or higher) DoD Security Clearance is required **

      ** A current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP) is required **

      ** Candidates must be U.S. Citizens **

      ** Permanent residents are NOT eligible for this role **

      ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

      -The ISSO is responsible for ensuring the appropriate operational security posture is maintained for an information system (IS) and as such, works in close collaboration with the Information System Security Manager (ISSM).
      -The ISSO shall have the detailed knowledge and expertise required to manage the security aspects of an IS and is assigned responsibility for the day-to-day security operations of a system.
      -Responsibilities also include physical and environmental protection, personnel security, incident handling, and security training and awareness.
      -In close coordination with the ISSM, the ISSO plays an active role in monitoring a system and its environment of operation to include developing and updating the System Security Plan (SSP), managing and controlling changes to the system, and assessing the security impact of those changes.

      Responsibilities of the ISSO include, but are not limited to:
      a. Ensure systems are operated, maintained, and disposed of in accordance with security policies and procedures as outlined in the security authorization package;
      b. Attend technical and security training (e.g., operating system, networking, security management) relative to assigned duties;
      c. Ensure all users have the requisite security clearances, authorization, need-to-know, and are aware of their security responsibilities before granting access to the IS;
      d. Report all security-related incidents to the ISSM;
      e. Conduct periodic reviews of ISs to ensure compliance with the security authorization package;
      f. Serve as member of the CCB, if designated by the ISSM;
      g. Coordinate any changes or modifications to hardware, software, or firmware of a system with the ISSM prior to the change;
      h. Formally notify the ISSM when changes occur that might affect system authorization;
      i. Monitor system recovery processes to ensure security features and procedures are properly restored and functioning correctly;
      j. Ensure all IS security-related documentation is current and accessible to properly authorized individuals;
      k. Ensure audit records are collected and reviewed; and
      l. ISSO shall be adequately trained and possesses technical competence commensurate with the complexity of the ISs.
      Skills: Minimum Qualifications
      - Current SECRET (or higher) DoD Security Clearance
      - Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)
      - Experience with Microsoft Windows and/or Linux system administration (2+ years)
      - Familiarity with configuration control and change management (SCCM)
      - Experience with networking concepts (switches, network security, TACLANE)
      - Experience with security concepts (Data Loss Prevention, Active Directory, and Security Log Analysis)
      - Active and continuous learner - either higher education or Continuing Professional Education

      Required Competencies
      - Strong written and verbal communication skills; ability to present reports to management; motivated to thoroughly investigate, analyze, and document system issues and resolutions
      - Ability to produce quality deliverables and to complete assigned projects on time; provides consistent status updates to ensure IT security projects stay focused
      - Consistent attention to detail - completes tasks per standard operating procedures; reports discovered anomalies and inconsistencies
      - Persistent and creative problem solver - strong troubleshooting skills and determined to find solutions to technical problems; identifies root cause and presents possible solutions to management
      - Strong work ethic and a proven professional - respectful, dependable, takes initiative and follows through, dedicated to excellence and getting the job done

      Preferred Competencies
      - Operating System and networking certifications
      - Knowledge of and experience with compliance to government regulations and standards (NIST Special Publications, NISPOM, Risk Management Framework, etc.)
      - Direct experience with a Department of Defense (DoD) or Defense Industrial Base (DIB) company supporting critical information systems

      Additional Details
      The ideal candidate for this position must be able to:
      - Report to work on time
      - Perform job duties for a specific duration of time or within a given period of time
      - Follow directions based on government requirements and company policies
      - Interact well with co-workers and customers
      - Accept constructive criticism
      - Maintain regular/consistent attendance and a full-time schedule
      - Maintain current status on projects
      - Stay current on training requirements
      - Solve issues and incidents in the field and be willing to work after hours as needed to complete an urgent and important task
      - Effective service depends upon the contractors performing duties to the best of their abilities; frequent absences will disrupt business operations and create additional work for coworkers; prompt and regular attendance is critical to the success of the company's mission.

      Education: - Undergraduate degree in Information Technology or Cyber Security, but candidate with proven experience will not be excluded from consideration
      - Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)


      Skills: Required
      • CYBER SECURITY
      • LINUX
      Additional
      Languages: English( Speak, Read, Write )

      State/Province: Florida
      City/Town: Jupiter


      Start Date: 06/19/2017 Hours Per Week: 40.00
      Est. End Date: 12/30/2017 Hours Per Day: 8.00
      Schedule Notes: Days Per Week: 5.00
       
      Job Number: MB-7222476
      Job Location: Jupiter, FL
      Rate: 52/hr max
      Duration: 6 month contract
      Input Date: 06/19/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Jeana Edrozo
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Email: jeana@midcom.com
      Website: www.midcom.com

      Information System Security Officer (ISSO) with active secret VA

      Description:
      159639/7213927

      Job Title: Information System Security Officer (ISSO)

      Number of Positions: 1
      Remaining Positions: 1
      Duties: ** An active SECRET (or higher) DoD Security Clearance is required **

      ** A current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP) is required **

      ** Candidates must be U.S. Citizens **

      ** Permanent residents are NOT eligible for this role **

      ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

      -The ISSO is responsible for ensuring the appropriate operational security posture is maintained for an information system (IS) and as such, works in close collaboration with the Information System Security Manager (ISSM).
      -The ISSO shall have the detailed knowledge and expertise required to manage the security aspects of an IS and is assigned responsibility for the day-to-day security operations of a system.
      -Responsibilities also include physical and environmental protection, personnel security, incident handling, and security training and awareness.
      -In close coordination with the ISSM, the ISSO plays an active role in monitoring a system and its environment of operation to include developing and updating the System Security Plan (SSP), managing and controlling changes to the system, and assessing the security impact of those changes.

      Responsibilities of the ISSO include, but are not limited to:
      a. Ensure systems are operated, maintained, and disposed of in accordance with security policies and procedures as outlined in the security authorization package;
      b. Attend technical and security training (e.g., operating system, networking, security management) relative to assigned duties;
      c. Ensure all users have the requisite security clearances, authorization, need-to-know, and are aware of their security responsibilities before granting access to the IS;
      d. Report all security-related incidents to the ISSM;
      e. Conduct periodic reviews of ISs to ensure compliance with the security authorization package;
      f. Serve as member of the CCB, if designated by the ISSM;
      g. Coordinate any changes or modifications to hardware, software, or firmware of a system with the ISSM prior to the change;
      h. Formally notify the ISSM when changes occur that might affect system authorization;
      i. Monitor system recovery processes to ensure security features and procedures are properly restored and functioning correctly;
      j. Ensure all IS security-related documentation is current and accessible to properly authorized individuals;
      k. Ensure audit records are collected and reviewed; and
      l. ISSO shall be adequately trained and possesses technical competence commensurate with the complexity of the ISs.
      Skills: Minimum Qualifications
      - Current SECRET (or higher) DoD Security Clearance
      - Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)
      - Experience with Microsoft Windows and/or Linux system administration (2+ years)
      - Familiarity with configuration control and change management (SCCM)
      - Experience with networking concepts (switches, network security, TACLANE)
      - Experience with security concepts (Data Loss Prevention, Active Directory, and Security Log Analysis)
      - Active and continuous learner - either higher education or Continuing Professional Education

      Required Competencies
      - Strong written and verbal communication skills; ability to present reports to management; motivated to thoroughly investigate, analyze, and document system issues and resolutions
      - Ability to produce quality deliverables and to complete assigned projects on time; provides consistent status updates to ensure IT security projects stay focused
      - Consistent attention to detail - completes tasks per standard operating procedures; reports discovered anomalies and inconsistencies
      - Persistent and creative problem solver - strong troubleshooting skills and determined to find solutions to technical problems; identifies root cause and presents possible solutions to management
      - Strong work ethic and a proven professional - respectful, dependable, takes initiative and follows through, dedicated to excellence and getting the job done

      Preferred Competencies
      - Operating System and networking certifications
      - Knowledge of and experience with compliance to government regulations and standards (NIST Special Publications, NISPOM, Risk Management Framework, etc.)
      - Direct experience with a Department of Defense (DoD) or Defense Industrial Base (DIB) company supporting critical information systems

      Additional Details
      The ideal candidate for this position must be able to:
      - Report to work on time
      - Perform job duties for a specific duration of time or within a given period of time
      - Follow directions based on government requirements and company policies
      - Interact well with co-workers and customers
      - Accept constructive criticism
      - Maintain regular/consistent attendance and a full-time schedule
      - Maintain current status on projects
      - Stay current on training requirements
      - Solve issues and incidents in the field and be willing to work after hours as needed to complete an urgent and important task
      - Effective service depends upon the contractors performing duties to the best of their abilities; frequent absences will disrupt business operations and create additional work for coworkers; prompt and regular attendance is critical to the success of the company's mission.

      Education: - Undergraduate degree in Information Technology or Cyber Security, but candidate with proven experience will not be excluded from consideration
      - Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)


      Skills: Required
      • CYBER SECURITY
      Additional
      Languages: English( Speak, Read, Write )

      State/Province: Virginia
      City/Town: Gainesville
      Address: 5731 Wellington Road


      Start Date: 06/05/2017 Hours Per Week: 40.00
      Est. End Date: 06/01/2018 Hours Per Day: 8.00
      Schedule Notes: Days Per Week: 5.00
       
      Job Number: MB-7213927
      Job Location: Gainesville, VA
      Rate: 67.50/hr max
      Duration: 12 month contract
      Input Date: 08/23/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Jeana Edrozo
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Email: jeana@midcom.com
      Website: www.midcom.com

      Integrated Planning & Service Readiness Leader

      Description:

      Legacy Engineering, a division of PDS Tech, is seeking an Integrated Planning & Service Readiness Leader for the Regional Jet Development Program.



      Promotion to Director Level will be indicated based on performance.



      This position is located in Nagoya, Japan.



      The Director of Service Readiness is a key member of the Customer Support leadership team, responsible to define and manage Customer Support requirements and commitments, develop, integrate and control the overall Customer Support non-recurring and recurring statement of work, support Sales campaigns, and establish and manage customer and supplier entry-into-service preparation activities. These responsibilities include Customer Support deliverable definition and requirements management, integrated planning across all the groups within Customer Support and key interfaces between Customer Support and other company divisions, integrated schedule development and performance tracking, resource management, and program communication.  In addition, this person will, on behalf of the SVP and Head of Customer Support, lead Customer Support team meetings.
       
      Additional group leader responsibilities include establishing deliverable commitments, work priorities, creating and managing the development process, creating the team as needed (including 3rd parties required to supplement company staff) and team structure, implementing governance and communication processes, and evaluating the performance of the group.

      Reports to:



      Senior Vice President and Head of Customer Support



      Scope of Work



      • Defines Customer Support service offerings and develops a standard Services Catalog that meets or exceeds customer or market expectations
      • Support of aircraft sales campaigns and manage the commitment process for customer requests outside of the Customer Support standard offering
      • Manage the Service Ready process across all Customer Support functions to ensure all CS committed deliverables are prepared and the customers are ready to put their first airplane into service;  this includes managing the many meetings to coordinate these activities internal to CS, with customers and suppliers
      • Negotiate and administer contracts with Customer Support suppliers, or with Customers for supplemental services (beyond those services agreed to in the airplane sales agreement)
      • Establish Service Ready processes and manage Service Ready activities to ensure Customers that support products and services and aircraft Suppliers are ready to support a smooth introduction of the aircraft into revenue service
      • Definition and control of Customer Support (CS) requirements (both customer and regulatory requirements)
      • Definition and control of overall Customer Support Statement of Work (SOW) and Work Breakdown Structure (WBS)
      • Ensure WBS elements are assigned to responsible organizations within CS (Organization Breakdown Structure – OBS)
      • Work with CS leadership team to create and control an Integrated Plan
      • Work with each CS group leader to create a CS-level integrated schedule.  Ensure the Integrated schedule supports Program critical milestones.  Ensure interface milestones are defined between CS groups and between CS groups and other company divisions. Document the various critical paths that management needs to focus on. Implement processes to keep schedules under baseline control and to provide weekly performance reports
      • Ensure resources requirements are aligned to committed schedule tasks and fit within the financial constraints of the Customer Support business plan
      • Manage/control the overall CS budget; obtain budget authorization, provide weekly/monthly actual-to-plan assessment
      • Implement and manage the process to identify and manage risks, issues and opportunities against the baselines.  In addition, control the “help needed” requests coming from the CS work groups
      • Hire and train key project management resources and provide project management support to the CS group leaders
      • Lead weekly program review meetings and develop CS-level summary program status material
      • Ensure CS supplier SOW is controlled and group leaders are managing supplier performance
      • Serve as the primary Customer Support (CS) interface to the Program Management Office
      • Develop Key Performance Indicators (KPIs) that track Customer Support performance and customer satisfaction
      • Act as the Customer Support interface to the Warranty and Guarantee committees
      • Lead the development of new Customer Support services which differentiate company from its competitors.

      It is important that the CS Service Readiness leader is able to work well with peers, subordinates and leaders in a demanding, new-airplane environment.  Experience in Commercial or Regional aircraft Customer Support functions will benefit the individual and group performance.
       
      6. Expected Education/Experience and Skills:



      1. Qualified candidates must hold an engineering degree from an accredited Engineering School. A business degree and/or a certificate in Program Management from an accredited university is preferable
      2. Candidates must have experience developing, managing and selling new business offerings
      3. Candidates must have profit & loss management experience
      4. Candidates must have demonstrated ability to develop positive working relationships and have excellent interpersonal communication skills
      5. Candidates must have 10 or more years in program management positions and 5 or more years leading program management functions preferably within an aerospace company Original Equipment Manufacturer
      6. Candidates must be familiar with program management industry best practices
      7. Candidates must have skills and experience working in cross-functional assignments.

       
      Job Number: 1710069304
      Job Location: Nagoya,
      Duration: 36 months
      Input Date: 06/12/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chad Dunavant
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002K3BK&URLSource=cjhunter

      Interior Install Techs - 2nd shift

      Description:


      PDS TECH is looking for Interior Installtion Tech for our client in Long Beach, CA.

      If you are interested and available, please call 1-800-234-8644 x 20210
      Resume to: KPelonis@pdstech.com


      Education and Experience Requirements:




      High school diploma/GED. Two (2) years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.


      Position Purpose:



      The Interior Installation Technician II works under general supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.

      Principal Duties and Responsibilities:

      Essential Functions: 1. Safely perform aircraft removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. 2. Use the material tracking system to create parts demand, track squawks and to sign-off work. 3. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. 4. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. 5. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. 6. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. 7. Assist technicians, under supervision, with aircraft maintenance requirements. 8. Adapt to sudden schedule changes.

      Additional Functions: 1. Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. 2. Make and use simple patterns for own use employing standardized procedures. 3. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 4. Perform other duties as required.

      Other Requirements: 1. Ability to read, write, speak, and understand the English language. 2. Ability to read and interpret blueprints and engineering documentation. 3. Ability to use hand/power tools and equipment associated with installation and removal of interiors. 4. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 5. Must be computer literate. 6. Excellent communication skills, both verbal and written.




      2 positions
      1 on 1st and 1 on 2nd shift
       
      Job Number: 1610049030
      Job Location: Long Beach, CA
      Per Diem: No
      Duration: 12 months
      Input Date: 04/20/2016
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Karla Pelonis
      Address: 3130 S HARBOR BLVD STE 100
      City, State: SANTA ANA, CA 92704
      Phone: 714/540-7900
      800 Phone: 800/234-8644
      Fax Phone: 714/540-8092
      Email: cecjcostamesa@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000001yVHK&URLSource=cjhunter

      Logistics Analyst - NC- C

      Description:
      Chipton Ross is seeking a Logistics Management Analyst in Fort Bragg, NC.


      Controls the efficient flow of goods, services, and information between point of origin through customer placement in order to meet customer requirements. Ensures that customer service and time objectives are achieved within existing financial constraints in order to meet marketing and financial objectives. Ensures the execution and continuous improvement of standard logistics processes, such as the replenishment system, data interchange systems, demand management, electronic data systems administration and related functions. Builds relationships with strategic customers through logistics initiatives. Integrates learning from customers, competitors, operating entities, distribution, transportation, customer service, other industries, industry groups, and professional training to continuously improve competitive position.

      MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
       
      Job Number: 163020
      Job Location: Fort Bragg, NC
      Rate: Up to $26.44 DOE
      Duration: 4 months
      Input Date: 05/11/2017
      Firm Name: CHIPTON ROSS
      Attention: Robert Davis
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: rdavis@chiptonross.com
      Website: www.chiptonross.com

      Logistics Engineer

      Description:
      PDS Tech, Inc. is seeking a candidate for Logistics Engineer position located in Riverdale, MD. 

      • Position requires skills, capabilities and knowledge required to interface with program level representatives as well as engineers and other technical personnel designing, developing and delivering flight elements.
      • Excellent oral, written, interpersonal, customer relation skills, and presentation skills required. Experience with a PC and Microsoft Office Word, Excel, PowerPoint, and Outlook required.
      • Ability to work independently with minimal supervision, and to make rational decisions, and to exercise good judgment is essential
      • Experience in technical integration of complex aerospace systems or operations engineering during the design, development, test and evaluation (DDT&E) and operations phases is desired.
      • Experience with ground operations and logistics for Space Shuttle, International Space Station (ISS), Expendable Launch Vehicle, Ground Support Equipment (GSE) requirements, implementation, and/or manufacturing, integration of payloads, space systems, and/or space programs is highly desired.
      • Knowledge of NASA spacecraft, launch vehicles, space launch operations, and flow processes desired.
      • Systems Engineering experience and/or education.
      • Logistics Engineering experience and/or education.
      • Experience reviewing, understanding, interpreting, assessing, and analyzing flight and ground hardware drawings/schematics.
      • Experience in definition and selection of Line Replaceable Units (LRUs).
      • Experience maintaining an LSA Record (LSAR) database.
      • Experience perform access analysis, Maintenance Tasks Analysis, and related assessments/analyses.
      • Experience supporting manufacturing, in-process test, integrated test development activities, and launch site operations.
      • Experience in reviewing and understanding Interface Control Documents (ICDs).
      • Experience in Verification and Validation of design and performance requirements related to space launch vehicles.
      • Experience understanding flight and ground hardware assembly and integration of sub-systems.
      Desired Qualifications/Experience:
      • Experience within aerospace/space industry highly desired.
      • Experience in development and management of console operations procedures and tools. Experience managing, monitoring, assessing and performing operations of complex systems in a console environment. (Test Console Operations, Vehicle Console Operations, etc.)
      • Using software tools that consider factors such as mean time between failures (MTBF), mean time to failure (MTTF), mean time to repair (MTTR), failure mode and effects analysis (FMEA), statistical distributions, tradeoffs in component/system design, repair capability, training, spares inventory, demand history, storage and distribution points, and transportation methods.
      • Using LSA and an LSAR database similar to PowerLOG-J to increase efficiency of maintenance and reduce the cost of providing support by preplanning all aspects of Integrated Logistics Support. Define support requirements for launch vehicle and support equipment system design.
      • Familiarity with Human Factor Engineering, MIL-STD-472G Education Science, Technology, Engineering, or Mathematics (STEM) Degree from an ABET-accredited university is required.
      Educational requirements:
      Equivalent of a Ph.D. with a minimum of 8 years of experience, a Masters with a minimum of 10 years of experience, or a BS with a minimum of 12 years of experience.
      Degree in Systems and/or Logistics Engineering desired.
      Proof of U.S. Citizenship is required.
       
      Job Number: 1710067282
      Job Location: Huntsville, AL
      Duration: 3 months
      Input Date: 04/26/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: David Goodman
      Address: 1839 S ALMA SCHOOL RD STE 250
      City, State: MESA, AZ 85210
      Phone: 480/929-9922
      800 Phone: 800/657-0997
      Fax Phone: 480/929-9779
      Email: cecjphoenix@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000021nqS&URLSource=cjhunter

      Machine Operator - Level 2

      Description:
      PDS Tech, Inc. is seeking a candidate for Machine Operator- Level 2 position located in Munice, Indiana.
      • Sets up and operates a production machine in accordance with established procedures and guidelines.
      • Reads and interprets blueprints and diagrams to select, position and secure machinery.
      • Adjusts machine settings to complete tasks accurately, according to specifications, and in a timely fashion.

      Requires a high school diploma or its equivalent.
      May have to complete an apprenticeship and/or formal training in area of specialty with 2-4 years of experience in the field or in a related area.
      Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
      Relies on instructions and pre-established guidelines to perform the functions of the job.
      Works under immediate supervision.
      Primary job functions do not typically require exercising independent judgment.
      Typically reports to a supervisor/manager.

      Special Considerations:
      Lifting is generally at or below 30Lbs. without significant repetitions.
      Moderate exposure to machinery, chemical, biological, and physical risks is anticipated.
      Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures.

       
      Job Number: 1710067919
      Job Location: Muncie, IN
      Duration: 8 months
      Input Date: 05/09/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Audrei Cortez
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000012ZSc&URLSource=cjhunter

      Machine Operator Level 2

      Description:
      PDS Tech, Inc. is seeking a candidate for Machine Operator - Level 2 in Muncie, IN.
      • Sets up and operates a production machine in accordance with established procedures and guidelines.
      • Reads and interprets blueprints and diagrams to select, position and secure machinery.
      • Adjusts machine settings to complete tasks accurately, according to specifications, and in a timely fashion. 

      • Requires a high school diploma or its equivalent.
      • May have to complete an apprenticeship and/or formal training in area of specialty with 2-4 years of experience in the field or in a related area.
      • Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
      • Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision.
      • Primary job functions do not typically require exercising independent judgment.
      • Typically reports to a supervisor/manager.
      • Special Considerations: Lifting is generally at or below 30Lbs. without significant repetitions.
      • Moderate exposure to machinery, chemical, biological, and physical risks is anticipated.
      • Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures.

       
      Job Number: 1710067274
      Job Location: Muncie, IN
      Duration: 7 months
      Input Date: 04/26/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Israel Ireneo
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000021noR&URLSource=cjhunter

      Machinist Level 4

      Description:
      PDS Tech is seeking a CNC Machinist in Garden Grove, CA. 
      • • Perform CNC set ups, operate and troubleshoot CNC mills 

        • Understand, write and edit Gibbs CNC programming routines. 

        • Verify dimensions of machined parts. 

        • Communicate regularly with supervisors and other employees regarding any production issues and ways to eliminate possible errors on set-up and/or programming. 

        • Evaluate and update “estimated to actual” cycle times. 

        • Focus on set-up and run time reduction. 

        • Maintain shop areas including cleaning, organizing tools, etc. 

      Minimum Requirements: 

      • Must have a High School Diploma or equivalent. Technical/vocational training/certification desired. 

      • 5+ years’ experience as CNC machinist in 3 & 4 axis. 

      • Ability to work within .0002” tolerance. 

      • Experience in the machining of various materials and metals including Aluminum, Copper, Brass, Invar, etc. 

      • CNC related knowledge including speeds and feeds. 

      • Experience working with Fadal and Haas CNC equipment desired. 

      • Prior aerospace, machining or automotive industry experience desired. 

      • Ability to read and understand drawings, schematics, blue prints, work instructions and use standard machine shop tools. 

      • Experience working in an environment of continuous process improvement and a track record of developing and implementing process improvements. AS9100 experience desired. 

      • Good interpersonal skills and ability to work effective with others. 

      • Excellent communication skills, both oral and written. English proficiency is required. 

      • Needs to be self-motivated and work independently on assignments with minimal oversight or direction. 

      • Ability to interact effectively with supervision, management and customer representatives. 

      • High attention to detail and data accuracy. 

      • Knowledge of all inspection equipment to perform job duties including height gages, micrometers, calipers, depth gages, etc. 

      • Knowledge of basic shop math and GD&T required. 

      • Demonstrated knowledge of workplace Health & Safety requirements. 
       
      Job Number: 1710065455
      Job Location: Garden Grove, CA
      Duration: 6 months
      Input Date: 03/17/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Israel Ireneo
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000021XLw&URLSource=cjhunter

      Maintenance Mechanic

      Description:
      TECHNICAL ASSOCIATE (NO Machinists)

      Maintenance Mechanic

      2nd shift (must be able to train on 1st shift, 6 am - 2:30 pm, for 1 month).
      Shifts will be as follows:
      2nd shift: 2PM to 10:30 PM


      The Technician will support coating process development and industrialization efforts, coating equipment operation and maintenance, and data documentation and reporting.

      DESIRED: Maintenance mechanic that has hands-on experience with operation plans.

       
      Job Number: 1710065854
      Job Location: Cincinnati, OH
      Duration: 12 months
      Input Date: 03/24/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Eric Khassanov
      Address: 2154 N CENTER ST STE 405D
      City, State: NORTH CHARLESTON, SC 29406
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000021a7s&URLSource=cjhunter

      Maintenance Technician

      Description:
      PDS Tech is seeking a Maintenance Technician for an open position in Clover, SC
      Job Duties: 

      • Use a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters. 

      • Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and NFPA codes. 

      • Performs calibration of instruments using various testers as stated on manufacturer manuals or standard work document. 

      • Identify and react to facility and equipment related maintenance issues in a timely and efficient manner. 

      • Perform preventive and repair maintenance tasks from written and verbal instructions. 

      • Documents all labor and material usage on designated work order system. 

      • Prioritize work assignments based on supervisor and production requirements. Keep supervisor informed of pending maintenance issues. 

      • Actively participate in suggestion and continuous improvement initiatives while supporting the 5s agenda. 

      • Maintain work environments in a safe and orderly condition. 

      • Follow all safety policies in the performance of job assignments in order to provide a safe working environment for all associates. 

      • Performs minor plumbing, office and equipment repairs as directed/supervised by management. 

      • Demonstrates adherence to all company policies and safety regulations in the performance of all assignments. 

      • Promote a safe and productive work environment. 
      Basic Qualifications: 

      • High School Diploma or GED. 

      • 5 years of Maintenance Technician or Mechanic experience including fabrication using lathes, mills, and shop equipment. 

      • 5 years of an electrical background including troubleshooting low and high voltage circuits. 

      • 5 years of power system knowledge, breakers panels, transformers, VFD’s and switch gears. 

      • Minimum of 1-2 yrs of industrial sewing machine repair experience 



      Preferred Qualifications: 

      • Associate’s degree or Technical certificate (HVAC, Electronics) 

      • 5 years of knowledge of PLC, electrical, and mechanical maintenance. 

      • Gerber automated cutting equipment
       
      Job Number: 1710062181
      Job Location: Clover, SC
      Per Diem: No
      Duration: 6 months
      Input Date: 01/12/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Melanie Streat
      Address: 2154 N CENTER ST STE 405D
      City, State: NORTH CHARLESTON, SC 29406
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002G6AS&URLSource=cjhunter

      Manager, Government Contracts

      Description:
      Government Contracts Manager - 

      Manages complex prime contracts / subcontracts in support of the Military Line of Business to include U.S. Army, Navy, Air Force, Special Operations,  Foreign Military Sales, et al.  Manages complex contractual and proposal activities for Department of Defense and Department of Homeland Security. 



      Primary Responsibilities:



      1.  Preparing Proposal Responses /Contract Negotiation (35%)



      • Manages preparation of proposal responses in line with Quality Gate process
        • Review /provide recommendations on contract terms & conditions (to include FAR/DFAR review and analysis via EXCEL).  Obtain approvals as required.
        • Respond to general proposal questions
        • Prepare/submit timely proposals

      • Perform contract negotiations with the customer, and supports Contracts leadership during higher level negotiations and contract definition. Obtain approvals as required
      • Identify and resolve contract and proposal issues, bid strategy, risk areas, and implications of emerging contractual issues.


      2.  Description:  Contract Management  ( 30%)



      • Draft agreements (teaming agreements, consulting agreements, NDAs (inclusive of multi-party), proposals, purchase orders, contracts and subcontracts. Obtain approvals as required.
      • Review contracts, subcontracts, modifications, bids, and invoices for content and accuracy; etc.  and obtains approvals as required
      • Oversee changes to requirements, scope or schedule are addressed with the customer and handled through contract modifications and documented through SAP Contracts to Cash and communicated through Contract Financial Brief to the team.
      • Oversee contract/subcontract inspections/audits Generate and maintain contract documentation and obtains approvals as required


      3.  Record Keeping & Reporting  (25%)



      • Manage accurate/complete contractual documentation in contracts database.
      • Provide timely reporting of requested/contracted information to include among others,  Small Business Plans, Contractor Manpower Reports, Spend Plans, IMS Reporting and CPAR responses.


      4.  General Contracts and Program Management Support (10%)



      • Prepare, write, and review program correspondence (contracts, finance, logistics, engineering, proposal administration) for management review/approval prior to submission to the customer.  Coordinate meetings, agendas, and minutes for business involving contracts or contract related issues. 
      • Interact daily and effectively communicate with program leadership, program managers, government personnel, prime contractors, and subcontractors on a variety of contract and subcontract issues.
      • Perform other contracts related duties as need to support the program and/or business as directed by the Sr. Director, Government Contracts


      Qualified Experience / Skills / Training: 



      Education:



      • BS/BA Degree in an associated discipline required (or equivalent in experience and education).


      Experience:



      Required:



      • Experienced U.S. Government Contracts Professional with 10-12 years of experience within either Government or Private industry with an emphasis in contract negotiation, placement and management.
      • Experience working on proposals for U.S. Government requirements; have hands on experience in pricing costs, time & materials and fixed price type contracts.


      Licensure/Certifications:



      Preferred



      • NCMA Certification or Government Equivalent.


      Knowledge, Skills, Demonstrated Capabilities:



      Required



      • Subject Matter Expert to include areas such as, but not limited to the following: contract modifications, contract compliance, contract requirements, contract changes, proposal preparation, Non-Disclosure Agreements, and contract negotiations.
      • Demonstrated knowledge of the FAR and DFARS and a solid understanding of DOD , DHS and GSA contracting methods.
      • Familiarity with the U.S. Government proposal review processes, and cost-allow ability and auditing.
      • In-depth knowledge of FAR Part 12 - Acquisition of Commercial Items policies and procedures, as well as FAR Part 15 Contracting by Negotiations
      • Ability to multi-task .
      • Team player, willing to go the extra mile to assure that projects are completed accurately and in a timely manner.
      • A high level of integrity is essential as well as an understanding of the importance of protecting the interests of the company while also assuring customer satisfaction.


       Preferred



      • An understanding of US Government Business Systems (Accounting, Billing, Cost Estimating, Property, Purchasing, Material Management and Accounting System (MMAS), Earned Value Management (EVM)) and the impacts that cost and schedule have on a Program.


      Communication Skills (Spoken, Written, Influencing, Proficiency in Other Languages):



      • Excellent internal and external communication skills and ability to write executive level letters, presentations, documents.


      Technical Systems Proficiency:



      • Internal and commercial systems proficiency required for the position. Ex: Microsoft Office Suite (including WORD, EXCEL PowerP oint), SharePoint, Project Management Systems,  SAP(can be learned).


      Travel Required:



      • 25% Domestic and possible International


      Citizenship:



      • U.S. citizen or green card holder.


      Decision Making, Complexity:



      As a person with delegated authority to sign business and contractual documents obligating Airbus Helicopters, Inc. funds, this person must have the business acumen and contract knowledge to make appropriate decisions prior to signing these documents. 



      Organizational information:



      Reports to the Sr. Manager, Government Contracts.



      Direct Reports:      Exempt: 1 (Potentially)                                         



      Job Dimensions, Contributions to Success:



      Responsible for assisting in budget creation and execution, and responsible for contract and financial management for all Programs assigned.



      Nature of Contacts:



      Involved, negotiation type communication on a  daily basis with internal and external parties



      Physical Requirements:



      Requires the ability to communicate effectively, both verbally and in written form. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; talk or hear. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.  Must be able to travel away from facility to carry out functions of position.  Must be able to travel domestically and internationally to carry out position responsibilities.  Requires use of computer.



       



       
      Job Number: 1710068331
      Job Location: Grand Prairie, TX
      Duration: 12 months
      Input Date: 05/17/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Rebecca Burrows
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000012blE&URLSource=cjhunter

      Manufacturing Engineer

      Description:
      Hello, my name is Brian Smith and I work for a company called 804 Technology. We are currently looking 2 Manufacturing Engineers with LEAN process improvement and manufacturing assembly experience preferably in aerospace located in St. Charles MO. The full job description is listed below as well as my contact information. If you are interested please respond be sending me your resume and your availability. Thank you in advance for your time.
      Brian Smith
      636-928-0330
      bsmith@804technology.com

      Manufacturing Engineer Contract/ Direct Contract
      3 mo+ Shift 1st
      Market BG/DT Yes to both
      Market State Tax Alert

      Required:
      Resume submittal to HR/Hiring Manager
      Minimum 3 years of experience

      We are looking for a Contingent Manufacturing Engineer with 3 plus years’ experience in the aerospace industry.
      • Able to review planning for improvement
      • Able to review assembly process for improvement
      • Proficient with Lean principles and methods

      Job Responsibilities:
      • Responsible for providing technical support, troubleshooting problems, and resolves production issues of various scope and complexity relating to quality.
      • Responsible for technical problem definition and solution in manufacturing environment. Responsible to act as liaison with design engineering on incorporating changes to the designs which improve manufacturability.
      • Develops, implements, maintains, and improve processes in the manufacture of aircraft structural assemblies.
      • Provides technical assistance and training support to manufacturing technicians.
      • Determines proper flow and sequence of material for efficient build process, and establishes methods for maximum utilization of production facilities and personnel.
      • Provides technical interpretation of drawings and specifications
      • Eliminate/reduce defects and improve yields. Perform root cause analysis and take corrective action to resolve failures.
      • Maintain awareness of the technological state-of-the-art and of the Company’s competitive position in the assigned area.
      • Develops, implements, and maintains processes in the manufacture of aircraft assemblies.
      • Supports Lean/Six Sigma initiatives including 5S, Waste Reduction, and Flow Improvements.
      • Understands Six Sigma Process control methods.
      • Defines and implements SPC control of key process characteristics. Utilizes output to identify trends, runs and out of control signals to prevent Quality excursions.
      • Analyze manufacturing processes for cost reduction opportunity
      • Eliminate/reduce build related test defects. Perform root cause analysis and take corrective action to resolve failures.
       
      Job Location: St. Charles, MO
      Rate: open
      Per Diem: Split
      Overtime: possible
      Duration: 3-6mos
      Start Date: ASAP
      Input Date: 06/16/2017
      Firm Name: 804 TECHNOLOGY
      Attention: Brian Smith
      Address: 5381 HIGHWAY N STE 201
      City, State: COTTLEVILLE, MO 63304
      Phone: 636/928-0330
      Fax Phone: 636/530-3693
      Email: bsmith@804technology.com
      Website: www.804technology.com

      Manufacturing Engineer

      Description:
      PDS Tech, Inc. is seeking a Manufacturing Engineer for an open position in Windsor Locks, CT.
      • Manages high complexity design and planning of layout for assembly and materials handling.
      • Adaptation of machine or equipment design to factory and production conditions.
      • Planning of sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.

      Job Responsibilities:

      • The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
      • Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel.
      • Develop the specific methods and instructions for manufacture and/or assembly of products.
      • Determine manufacturing feasibility to: o Identify potential fabrication problems o Draw attention to special fabrication requirements o Ensure the latest developments in manufacturing technology are considered in the design phase.
      • Establish design inherent cost targets which reflect hardware target cost. The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost.
      • Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans.
      • Establish touch labor cost targets on shop/lab activities as requested.
      • Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process.
      • Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.
      • Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems.
      • Review and implement engineering changes to determine feasibility, producibility and delta cost impact.
      • Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions.
      • Lead efforts to understand non-conformances and reduce Cost of Poor Quality.
      • Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification

      Education:
      • Candidate must possess a BS in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
      • Background courses in mechanical design and/or manufacturing courses are beneficial.

      Experience Preferred:

      • 10 years’ experience working on the manufacture of complex mechanical systems is desirable
      • Working knowledge of Microsoft Windows environment and experience in using any type of Publishing System
      • Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
      • Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
      • Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable
      • Experience with a MRP (Manufacturing Resource Planning) system is desirable.

       
      Job Number: 1610059633
      Job Location: Windsor Locks, CT
      Per Diem: No
      Duration: 24 months
      Input Date: 04/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chris O\'Connor
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002Fqgi&URLSource=cjhunter

      Manufacturing Engineer

      Description:
      PDS Tech, Inc. is seeking a Manufacturing Engineer for an open position in Windsor Locks, CT.
      • Manages high complexity design and planning of layout for assembly and materials handling.
      • Adaptation of machine or equipment design to factory and production conditions.
      • Planning of sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.

      Job Responsibilities:

      • The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
      • Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel.
      • Develop the specific methods and instructions for manufacture and/or assembly of products.
      • Determine manufacturing feasibility to: o Identify potential fabrication problems o Draw attention to special fabrication requirements o Ensure the latest developments in manufacturing technology are considered in the design phase.
      • Establish design inherent cost targets which reflect hardware target cost. The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost.
      • Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans.
      • Establish touch labor cost targets on shop/lab activities as requested.
      • Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process.
      • Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.
      • Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems.
      • Review and implement engineering changes to determine feasibility, producibility and delta cost impact.
      • Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions.
      • Lead efforts to understand non-conformances and reduce Cost of Poor Quality.
      • Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification

      Education:
      • Candidate must possess a BS in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
      • Background courses in mechanical design and/or manufacturing courses are beneficial.

      Experience Preferred:

      • 10 years’ experience working on the manufacture of complex mechanical systems is desirable
      • Working knowledge of Microsoft Windows environment and experience in using any type of Publishing System
      • Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
      • Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
      • Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable
      • Experience with a MRP (Manufacturing Resource Planning) system is desirable.

       
      Job Number: 1610059629
      Job Location: Windsor Locks, CT
      Per Diem: No
      Duration: 24 months
      Input Date: 03/03/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chris O\'Connor
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002FqgO&URLSource=cjhunter

      Manufacturing Engineer

      Description:
      PDS Tech, Inc. is seeking a Manufacturing Engineer for an open position in Windsor Locks, CT.
      • Manages high complexity design and planning of layout for assembly and materials handling.
      • Adaptation of machine or equipment design to factory and production conditions.
      • Planning of sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.

      Job Responsibilities:

      • The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
      • Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel.
      • Develop the specific methods and instructions for manufacture and/or assembly of products.
      • Determine manufacturing feasibility to: o Identify potential fabrication problems o Draw attention to special fabrication requirements o Ensure the latest developments in manufacturing technology are considered in the design phase.
      • Establish design inherent cost targets which reflect hardware target cost. The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost.
      • Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans.
      • Establish touch labor cost targets on shop/lab activities as requested.
      • Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process.
      • Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.
      • Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems.
      • Review and implement engineering changes to determine feasibility, producibility and delta cost impact.
      • Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions.
      • Lead efforts to understand non-conformances and reduce Cost of Poor Quality.
      • Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification

      Education:
      • Candidate must possess a BS in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
      • Background courses in mechanical design and/or manufacturing courses are beneficial.

      Experience Preferred:

      • 10 years’ experience working on the manufacture of complex mechanical systems is desirable
      • Working knowledge of Microsoft Windows environment and experience in using any type of Publishing System
      • Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
      • Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
      • Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable
      • Experience with a MRP (Manufacturing Resource Planning) system is desirable.

       
      Job Number: 1610059632
      Job Location: Windsor Locks, CT
      Per Diem: No
      Duration: 24 months
      Input Date: 03/03/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chris O\'Connor
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002Fqgd&URLSource=cjhunter

      Manufacturing Engineer

      Description:
      PDS Tech, Inc. is seeking a Manufacturing Engineer for an open position in Windsor Locks, CT.
      • Manages high complexity design and planning of layout for assembly and materials handling.
      • Adaptation of machine or equipment design to factory and production conditions.
      • Planning of sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.

      Job Responsibilities:

      • The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
      • Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel.
      • Develop the specific methods and instructions for manufacture and/or assembly of products.
      • Determine manufacturing feasibility to: o Identify potential fabrication problems o Draw attention to special fabrication requirements o Ensure the latest developments in manufacturing technology are considered in the design phase.
      • Establish design inherent cost targets which reflect hardware target cost. The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost.
      • Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans.
      • Establish touch labor cost targets on shop/lab activities as requested.
      • Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process.
      • Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.
      • Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems.
      • Review and implement engineering changes to determine feasibility, producibility and delta cost impact.
      • Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions.
      • Lead efforts to understand non-conformances and reduce Cost of Poor Quality.
      • Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification

      Education:
      • Candidate must possess a BS in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
      • Background courses in mechanical design and/or manufacturing courses are beneficial.

      Experience Preferred:

      • 10 years’ experience working on the manufacture of complex mechanical systems is desirable
      • Working knowledge of Microsoft Windows environment and experience in using any type of Publishing System
      • Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
      • Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
      • Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable
      • Experience with a MRP (Manufacturing Resource Planning) system is desirable.

       
      Job Number: 1610059631
      Job Location: Windsor Locks, CT
      Per Diem: No
      Duration: 24 months
      Input Date: 12/22/2016
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chris O\'Connor
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002FqgY&URLSource=cjhunter

      Manufacturing Engineer

      Description:
      PDS Tech, Inc. is seeking a Manufacturing Engineer for an open position in Windsor Locks, CT.
      • Manages high complexity design and planning of layout for assembly and materials handling.
      • Adaptation of machine or equipment design to factory and production conditions.
      • Planning of sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.

      Job Responsibilities:

      • The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
      • Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel.
      • Develop the specific methods and instructions for manufacture and/or assembly of products.
      • Determine manufacturing feasibility to: o Identify potential fabrication problems o Draw attention to special fabrication requirements o Ensure the latest developments in manufacturing technology are considered in the design phase.
      • Establish design inherent cost targets which reflect hardware target cost. The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost.
      • Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans.
      • Establish touch labor cost targets on shop/lab activities as requested.
      • Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process.
      • Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.
      • Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems.
      • Review and implement engineering changes to determine feasibility, producibility and delta cost impact.
      • Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions.
      • Lead efforts to understand non-conformances and reduce Cost of Poor Quality.
      • Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification

      Education:
      • Candidate must possess a BS in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
      • Background courses in mechanical design and/or manufacturing courses are beneficial.

      Experience Preferred:

      • 10 years’ experience working on the manufacture of complex mechanical systems is desirable
      • Working knowledge of Microsoft Windows environment and experience in using any type of Publishing System
      • Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
      • Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
      • Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable
      • Experience with a MRP (Manufacturing Resource Planning) system is desirable.

       
      Job Number: 1610059635
      Job Location: Windsor Locks, CT
      Per Diem: No
      Duration: 24 months
      Input Date: 12/22/2016
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chris O\'Connor
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002Fqgs&URLSource=cjhunter

      Manufacturing Engineer

      Description:
      PDS Tech, Inc. is seeking a Manufacturing Engineer for an open position in Windsor Locks, CT.
      • Manages high complexity design and planning of layout for assembly and materials handling.
      • Adaptation of machine or equipment design to factory and production conditions.
      • Planning of sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.

      Job Responsibilities:

      • The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
      • Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel.
      • Develop the specific methods and instructions for manufacture and/or assembly of products.
      • Determine manufacturing feasibility to: o Identify potential fabrication problems o Draw attention to special fabrication requirements o Ensure the latest developments in manufacturing technology are considered in the design phase.
      • Establish design inherent cost targets which reflect hardware target cost. The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost.
      • Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans.
      • Establish touch labor cost targets on shop/lab activities as requested.
      • Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process.
      • Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.
      • Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems.
      • Review and implement engineering changes to determine feasibility, producibility and delta cost impact.
      • Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions.
      • Lead efforts to understand non-conformances and reduce Cost of Poor Quality.
      • Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification

      Education:
      • Candidate must possess a BS in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
      • Background courses in mechanical design and/or manufacturing courses are beneficial.

      Experience Preferred:

      • 10 years’ experience working on the manufacture of complex mechanical systems is desirable
      • Working knowledge of Microsoft Windows environment and experience in using any type of Publishing System
      • Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
      • Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
      • Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable
      • Experience with a MRP (Manufacturing Resource Planning) system is desirable.

       
      Job Number: 1610059895
      Job Location: Windsor Locks, CT
      Per Diem: No
      Duration: 24 months
      Input Date: 11/10/2016
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chris O\'Connor
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002FsdL&URLSource=cjhunter

      Manufacturing Engineer

      Description:
      PDS Tech, Inc. is seeking a Manufacturing Engineer for an open position in Windsor Locks, CT.
      • Manages high complexity design and planning of layout for assembly and materials handling.
      • Adaptation of machine or equipment design to factory and production conditions.
      • Planning of sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.

      Job Responsibilities:

      • The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
      • Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel.
      • Develop the specific methods and instructions for manufacture and/or assembly of products.
      • Determine manufacturing feasibility to: o Identify potential fabrication problems o Draw attention to special fabrication requirements o Ensure the latest developments in manufacturing technology are considered in the design phase.
      • Establish design inherent cost targets which reflect hardware target cost. The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost.
      • Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans.
      • Establish touch labor cost targets on shop/lab activities as requested.
      • Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process.
      • Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.
      • Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems.
      • Review and implement engineering changes to determine feasibility, producibility and delta cost impact.
      • Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions.
      • Lead efforts to understand non-conformances and reduce Cost of Poor Quality.
      • Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification

      Education:
      • Candidate must possess a BS in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
      • Background courses in mechanical design and/or manufacturing courses are beneficial.

      Experience Preferred:

      • 10 years’ experience working on the manufacture of complex mechanical systems is desirable
      • Working knowledge of Microsoft Windows environment and experience in using any type of Publishing System
      • Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
      • Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
      • Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable
      • Experience with a MRP (Manufacturing Resource Planning) system is desirable.

       
      Job Number: 1610059634
      Job Location: Windsor Locks, CT
      Per Diem: No
      Duration: 24 months
      Input Date: 11/04/2016
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chris O\'Connor
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002Fqgn&URLSource=cjhunter

      Manufacturing Engineer

      Description:
      PDS Tech, Inc. is seeking a Manufacturing Engineer for an open position in Windsor Locks, CT.
      • Manages high complexity design and planning of layout for assembly and materials handling.
      • Adaptation of machine or equipment design to factory and production conditions.
      • Planning of sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.

      Job Responsibilities:

      • The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
      • Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel.
      • Develop the specific methods and instructions for manufacture and/or assembly of products.

      Determine manufacturing feasibility to: 

      • Identify potential fabrication problems
      • Draw attention to special fabrication requirements
      • Ensure the latest developments in manufacturing technology are considered in the design phase.
      • Establish design inherent cost targets which reflect hardware target cost. The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost.
      • Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans.
      • Establish touch labor cost targets on shop/lab activities as requested.
      • Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process.
      • Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.
      • Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems.
      • Review and implement engineering changes to determine feasibility, producibility and delta cost impact.
      • Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions.
      • Lead efforts to understand non-conformances and reduce Cost of Poor Quality.
      • Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification

      Education:
      • Candidate must possess a BS in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
      • Background courses in mechanical design and/or manufacturing courses are beneficial.

      Experience Preferred:

      • 10 years’ experience working on the manufacture of complex mechanical systems is desirable
      • Working knowledge of Microsoft Windows environment and experience in using any type of Publishing System
      • Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
      • Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
      • Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable
      • Experience with a MRP (Manufacturing Resource Planning) system is desirable.

       
      Job Number: 1610059636
      Job Location: Windsor Locks, CT
      Per Diem: No
      Duration: 24 months
      Input Date: 11/04/2016
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chris O\'Connor
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002Fqgx&URLSource=cjhunter

      Manufacturing Engineer

      Description:
      PDS Tech, Inc. is seeking a Manufacturing Engineer  for an open position in Windsor Locks, CT.

      The Manufacturing Engineering functional group is responsible for determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware for use in space and sea applications, while complying with all applicable Environmental, Health and Safety requirements as well as all applicable Quality requirements. Job Responsibilities: The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
       
      • Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel
      • Develop the specific methods and instructions for manufacture and/or assembly of products. 

                  Determine manufacturing feasibility to

      • Identify potential fabrication problems o Draw attention to special fabrication requirements
      • Ensure the latest developments in manufacturing technology are considered in the design phase.
      • Establish design inherent cost targets which reflect hardware target cost
      • The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost
      • Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans.
      • Establish touch labor cost targets on shop/lab activities as requested.
      • Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process.
      • Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.
      • Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems.
      • Review and implement engineering changes to determine feasibility, producibility and delta cost impact.
      • Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions.
      • Lead efforts to understand non-conformances and reduce Cost of Poor Quality.
      • Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification

       • Candidate must possess a BS in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
       • Background courses in mechanical design and/or manufacturing courses are beneficial 

      Experience Preferred:

       • 10 years’ experience working on the manufacture of complex mechanical systems is desirable
       • Working knowledge of Microsoft Windows environment and experience in using any type of Publishing System
      • Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desire
       
       
      Job Number: 1610058903
      Job Location: Windsor Locks, CT
      Per Diem: No
      Duration: 24 months
      Input Date: 10/24/2016
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chris O\'Connor
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002Fmtn&URLSource=cjhunter

      Manufacturing Engineer

      Description:
      PDS Tech, Inc. is seeking a Manufacturing Engineer  for an open position in Windsor Locks, CT.

      The Manufacturing Engineering functional group is responsible for determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware for use in space and sea applications, while complying with all applicable Environmental, Health and Safety requirements as well as all applicable Quality requirements. Job Responsibilities: The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
       
      • Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel
      • Develop the specific methods and instructions for manufacture and/or assembly of products. 

                  Determine manufacturing feasibility to

      • Identify potential fabrication problems o Draw attention to special fabrication requirements
      • Ensure the latest developments in manufacturing technology are considered in the design phase.
      • Establish design inherent cost targets which reflect hardware target cost
      • The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost
      • Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans.
      • Establish touch labor cost targets on shop/lab activities as requested.
      • Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process.
      • Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.
      • Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems.
      • Review and implement engineering changes to determine feasibility, producibility and delta cost impact.
      • Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions.
      • Lead efforts to understand non-conformances and reduce Cost of Poor Quality.
      • Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification

       • Candidate must possess a BS in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
       • Background courses in mechanical design and/or manufacturing courses are beneficial 

      Experience Preferred:

       • 10 years’ experience working on the manufacture of complex mechanical systems is desirable
       • Working knowledge of Microsoft Windows environment and experience in using any type of Publishing System
      • Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desire
       
       
      Job Number: 1610058900
      Job Location: Windsor Locks, CT
      Per Diem: No
      Duration: 24 months
      Input Date: 10/24/2016
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chris O\'Connor
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002FmtY&URLSource=cjhunter

      Manufacturing Engineer

      Description:
      PDS Tech, Inc. is seeking a Manufacturing Engineer  for an open position in Windsor Locks, CT.

      The Manufacturing Engineering functional group is responsible for determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware for use in space and sea applications, while complying with all applicable Environmental, Health and Safety requirements as well as all applicable Quality requirements. Job Responsibilities: The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
       
      • Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel
      • Develop the specific methods and instructions for manufacture and/or assembly of products. 

                  Determine manufacturing feasibility to

      • Identify potential fabrication problems o Draw attention to special fabrication requirements
      • Ensure the latest developments in manufacturing technology are considered in the design phase.
      • Establish design inherent cost targets which reflect hardware target cost
      • The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost
      • Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans.
      • Establish touch labor cost targets on shop/lab activities as requested.
      • Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process.
      • Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.
      • Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems.
      • Review and implement engineering changes to determine feasibility, producibility and delta cost impact.
      • Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions.
      • Lead efforts to understand non-conformances and reduce Cost of Poor Quality.
      • Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification

       • Candidate must possess a BS in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
       • Background courses in mechanical design and/or manufacturing courses are beneficial 

      Experience Preferred:

       • 10 years’ experience working on the manufacture of complex mechanical systems is desirable
       • Working knowledge of Microsoft Windows environment and experience in using any type of Publishing System
      • Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desire
       
       
      Job Number: 1610058902
      Job Location: Windsor Locks, CT
      Per Diem: No
      Duration: 24 months
      Input Date: 10/24/2016
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chris O\'Connor
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002Fmti&URLSource=cjhunter

      Manufacturing Engineer - Level 1

      Description:
      Manufacturing Engineer - Level 1

      Location: Marion, MA
      Rate: $25.00 - $35.00/HR
      1 year contract position

      **MUST be able to obtain a Secret Clearance**

      Description
      - Plans, directs, and coordinates elements of design, materials, and manufacturing processes in industrial plants.
      - Works from the design for a product and develop processes for production, standards, and quality control.

      Skill/Experience/Education
      Mandatory:
      - Manufacturing Engineering experience.
      - Pro-E experience.
      - Procedure development experience.
       
      Job Number: 7252
      Job Location: Marion, MA
      Rate: $25.00 - $35.00/HR
      Per Diem: Split Possible
      Overtime: Possible
      Duration: 1 yr
      Input Date: 03/29/2017
      Firm Name: INCONEN CORPORATION
      Attention: Patrick O'Neil
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Email: patrick@inconen.com
      Website: www.inconen.com

      Manufacturing Engineers - South Carolina

      Description:
      Leading global aerospace company are seeking a number of experienced Manufacturing Engineers for the introduction of new products into manufacture within one of their new production facilities in South Carolina.

      They are looking for experienced Manufacturing Engineers who have worked in the aircraft/aerospace industry, specifically in the forming and machining of thin metallic structures. This work relates to the introduction of new products, such as aircraft skins. (Lip Skins)

      Initial contracts will be 3-6 months, with a strong likelihood of further work beyond this.
       
      Job Number: JO0000000004
      Job Location: SC
      Rate: Negotiable
      Per Diem: Possible
      Overtime: Possible
      Duration: 3-6 months initially
      Start Date: ASAP
      Input Date: 07/28/2017
      Firm Name: STRONGFIELD TECHNOLOGIES USA INC
      Attention: Adrian Medhurst
      Address: 5000 BIRCH ST STE 3000
      City, State: NEWPORT BEACH, CA 92660
      Email: jobs@strongfieldtech.com
      Website: www.strongfield.com

      Manufacturing Process Engineer-Secret Clearance

      Description:
      PDS Tech is seeking a candidate for the Manufacturing Process Engineer position located in Clearfield, UT.  
      Process Development - Manufacturing Engineer will be responsible for the following: 
      • Applies a comprehensive knowledge of composites processing to develop processes for new products. 
      • Troubleshoots existing processes to improve safety, quality, cost and efficiency. 
      • Applies 6 sigma tools to measure and analyze process data. 
      • Manages development projects (funded through direct, indirect, IR&D or CRAD) by developing a project plan, managing work of technicians, managing to budgets and schedules, and preparing reports. 
      • Stays current on manufacturing, material, and process technologies for potential application in Orbital ATKs current processes. 
      Minimum Qualifications: 
      • BS in classical engineering (Mechanical, Civil, Materials Science, etc.) with a minimum of 10 years of industry experience or MS with a minimum of 5 years of industry experience preferred. 
      • Minimum of 7 years of experience in a composites Process Development and Manufacturing Engineering environment. 
      • Solid understanding of machine automation – esp of composites manufacturing equipment 
      • Green belt six sigma 
      • Successful experience in process design and start up required 
      • Demonstrated knowledge of broad composites manufacturing technology 
      MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE
      **Must have an active clearance with an investigation within the last 4.5 years (or 4 years 6 months)** 
      Preferred Qualifications: 
      • Experience in robotics, aerospace composites, and Six Sigma certification desirable. 
      • Experience in working with composite lamination process and equipment preferred 
      • Experience working in a high rate manufacturing environment 
      • Experience in applied research and development for new products 
      Competencies for Success: 
      • Demonstrates a commitment to quality and safety 
      • Excellent communication skills 
      • Ability to multitask and prioritize 
      • Strong attention to detail and accuracy 
      • Ability to work independently 
      • Ability to work in a dynamic, fast paced, diverse environment 
      • Initiative, self-starter, adaptable, and high motivation for excellence 
      • High energy, results oriented, self-motivated / self-reliant, team player 
      • Strong interpersonal skills with ability to interface with an organization at all levels
       
      Job Number: 1710065778
      Job Location: Clearfield, UT
      Duration: 12 months
      Input Date: 03/23/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: David Goodman
      Address: 1839 S ALMA SCHOOL RD STE 250
      City, State: MESA, AZ 85210
      Phone: 480/929-9922
      800 Phone: 800/657-0997
      Fax Phone: 480/929-9779
      Email: cecjphoenix@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000021Zb4&URLSource=cjhunter

      Manufacturing/Industrial Engineer 2

      Description:
      PDS Tech is seeking a candidate for the Manufacturing/Industrial Engineer 2 position located in Sacramento, CA.   
      Provides support in developing and implementing semi-complex performance measurement and improvement initiatives.
      Participates in making semi-complex inspections and investigations by gathering data related to proper utilization of company labor, equipment, materials and facilities.
      Supporsemi-complex planning of equipment layout, workflow, and accidental prevention measures to maintain optimum and safe utilization of plant resources.
      Participates in determining the most economic methods, operation sequence and tooling for the fabrication of parand finishing/assembly of componenfor semi-complex processes. Participates in designing and performing studies of semi-complex manufacturing processes and equipment.
      Performs support in semi-complex manufacturing engineer duties, may include plant layout, scrap reduction and quality assurance functions..

       
      Job Number: 1710069549
      Job Location: Sacramento, CA
      Duration: 12 months
      Input Date: 06/16/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Israel Ireneo
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002CmGh&URLSource=cjhunter

      Marketing Analyst

      Description:
      Our Client: Intl Freight Forwarder and Supply Chain
      Seeking:

      Marketing Analyst
      Permanent position Salary range: $45k-$65k

      Providing Support to Corporate Sales and Marketing to this International Freight Forwarding / 3PL/ Supply Chain Company

      Responsibilities
      Qualifications
      Ideal Candidate will have Marketing Experience and Knowledge of International Freight Forwarding / Logistic Services

      Products: Air/Ocean Import, Air/Ocean Export/ Customs Brokerage/ Domestic/Warehousing/Distribution/Supply Chain

      JOB SUMMARY:

      Support Corporate Sales & Marketing (including Director of Marketing and Global HQ in Taipei) in delivering initiatives required to help achieve company goals. This role will be key in helping us standardize our approach to RFI completions, promotional and collateral resource fulfillment, sales team support (research, sales deck support, etc.), web copy and industry newsletters, and the various needs of sales people around the world. The ideal candidate would maintain great attention to detail, be able to produce high quality written English, have in-depth knowledge of our industry, and uphold a high level of professionalism.


      DUTIES AND RESPONSIBILITIES:

      1. RFI completion complete RFIs for large opportunities, reaching out and balancing the input of global stakeholders and synthesizing the content in a concise, professional document; develop library of RFI responses for future use.

      2 Marketing Resource Fulfilment work with regions to source and fulfil internal orders for marketing promotional and printed collateral materials. Develop streamlined process balancing cost and required on-site dates.

      3. General Sales Team Support support business development via market or client-specific research for large clients and opportunities; work with sales to develop targeted sales decks for clients. Manage marketing resources on company intranet.

      4. Support External Branding Make necessary updates to website copy and compile a company newsletter for clients in cooperation with product and regional team leaders; shepherd the translation process to ensure quality and fluid process.

      5. Agency Partner Coordination support Marketing Director in project management tasks associated with Client's marketing agency including budgeting, timelines/milestone management, invoicing/payment, etc.

      6. Support product directors or other executives in the company with special project assignment needs



      Bachelors degree, highly desired
      Client will consider a recent college grad with 1-3 marketing experience, With interest in the Global Logistics Industry.

      Job Requirements:
      Salary DOE
      Full medical and 401k
       
      Job Number: 159135
      Job Location: El Segundo, CA
      Rate: $24 to $28.00 DOE
      Duration: Perm
      Input Date: 10/07/2016
      Firm Name: CHIPTON ROSS
      Attention: Lisa Roll
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: lroll@chiptonross.com
      Website: www.chiptonross.com

      Material Handler - Level 1

      Description:
      PDS Tech is seeking a candidate for Material Handler position located in Elk Grove Village, IL.  
      Distribution center experience.
      Picking and Packaging small electronics items using RF system.
      Shipping UPS & Fedex Small Parcels. 
      Loads and unloads material within a warehouse or storage facility.
      Utilizes hand trucks, forklifts, hoists, conveyors, or other handling equipment to move material to and from aircraft, trucks or trains and within the storage facility.
      May require a high school diploma with 0-2 years of experience in the field or in a related area.
      Has knowledge of commonly-used practices, and procedures within a particular field.
      Relies on instructions and pre-established guidelines to perform the functions of the job.
      Works under immediate supervision.
      Primary job functions do not typically require exercising independent judgment.
      Typically reports to a supervisor or manager.

      Special Considerations:
      Lifting is generally at or below 30Lbs. without significant repetitions
      . Moderate exposure to machinery, chemical, biological, and physical risks is anticipated.
      Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures.
       
      Job Number: 1710064755
      Job Location: Elk Grove Village, IL
      Duration: 6 months
      Input Date: 03/06/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Lea Salmo
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000021SmE&URLSource=cjhunter

      Material Handler - Level 1

      Description:
      PDS Tech is seeking a candidate for the Material handler Level 1 position located in Reno, NV.  
      • Loads and unloads material within a warehouse or storage facility.
      • Utilizes hand trucks, forklifts, hoists, conveyors, or other handling equipment to move material to and from aircraft, trucks or trains and within the storage facility.

      • May require a high school diploma with 0-2 years of experience in the field or in a related area.
      • Has knowledge of commonly-used practices, and procedures within a particular field.
      • Relies on instructions and pre-established guidelines to perform the functions of the job.
      • Works under immediate supervision.
      • Primary job functions do not typically require exercising independent judgment.
      • Typically reports to a supervisor or manager.
      • Special Considerations:
      • Lifting is generally at or below 30Lbs. without significant repetitions.
      • Moderate exposure to machinery, chemical, biological, and physical risks is anticipated.
      • Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures. 

      ** Candidate should possess at least a minimum of 1 year of receiving experience ** 

      This position is in general is an order fulfillment center job. General duties would involve receiving, cycle counts, picking, packing, and shipping activities. Preferred qualifications are: 
      • 1+ years of warehousing experience 
      • 1+ years of operating a forklift, reach truck, order picker, walkie rider, or a wave

       
      Job Number: 1710064306
      Job Location: Reno, NV
      Duration: 9 months
      Input Date: 02/22/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Shannon White
      Address: P O BOX 619820
      City, State: DALLAS, TX 75261-9820
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9636
      Email: cecjnrt@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002GM3C&URLSource=cjhunter

      Material Handler Level 1

      Description:
      PDS Tech, Inc. is seeking a candidate for Material Handler - Level 1 position located in Reno, NV. 
      • Loads and unloads material within a warehouse or storage facility.
      • Utilizes hand trucks, forklifts, hoists, conveyors, or other handling equipment to move material to and from aircraft, trucks or trains and within the storage facility. 
      • Relies on instructions and pre-established guidelines to perform the functions of the job.
      •  

      Special Considerations: Lifting is generally at or below 30Lbs. without significant repetitions. Moderate exposure to machinery, chemical, biological, and physical risks is anticipated. Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures. 
       
      • May require a high school diploma with 0-2 years of experience in the field or in a related area.
      • Has knowledge of commonly-used practices, and procedures within a particular field.
      • Candidate should possess at least a minimum of 1 year of receiving experience
      • 1+ years of warehousing experience 
      • 1+ years of operating a forklift, reach truck, order picker, walkie rider, or a wave

       
      Job Number: 1710067297
      Job Location: Reno, NV
      Duration: 7 months
      Input Date: 04/26/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Israel Ireneo
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000021nsO&URLSource=cjhunter

      Materials Logistics Specialist 2

      Description:
      PDS Tech, Inc. is seeking a Materials Logistics Specialist 2 for an open position in Alpharetta, GA. 
      • Participates in monitoring of semi-complex materials through the production cycle. 
      • Participates in the preparation and maintenance of basic reports; analyzes supplier capability; participates in make/buy studies and cost analyses. 
      • Participates in creating integrated project plans and schedules for the supply team's capital and development projects. 
      • Participates in the effectiveness evaluation of current material control standards. 
      • Supports the planning and coordination of new product introductions; assess the impact and support changes to overall production schedules. 

      Required Knowledge/Skills, Education and Experience: 
      2 years experience in related field required; 
      5 year experience in related field preferred 
      1. Occupation related competencies: • Education: BS/BA required; BS/BA in Engineering or Supply Chain Mgmt preferred • Supply chain industry association membership • Supply chain-specific certification. 
      2. Profession related competencies: • Inventory management • Planning, Scheduling, Execution, activity control 
      1. Sales and Operations Planning 
      2. Detailed scheduling and finite capacity scheduling 
      3. Manufacturing resources planning (MRP II) 
      4. Production activity control o ERP and MRP o MRP exception management o SAP production planning module o Demand management and forecasting o Process improvement o Six sigma o Lean operating principles o Tactical purchasing, supplier management o Contract and material negotiating o Consignment inventory and supplier management o Kanban o Theory of constraints o Lot sizing o Value Stream / Process Mapping o Excel-advanced (pivot tables/charts, VBA, solver, dynamic charting) o Access – work with a create database with queries and forms 
      o Queuing theory and WIP calculation (WIP = TP X CT) o Standards (time measurement) o Vendor managed inventory o JIT material management 3. Foundational competencies • Workplace and leadership competencies o Problem solving and decision making o Teamwork and collaboration o Accountability and responsibility o Customer focus (internal and external) o Strategic planning o Analytical thinking o Supporting and training o Project management o Risk management • Personal effectiveness o Awareness of needs of others and empathy o Integrity o Continuous learning o Effective communication o Interpersonal skills o Creativity / Innovative o Detailed oriented o Self-directed and motivated o Organizing and quality orientation o Results orientation o Assertiveness 
      PLEASE NOTE: Qualified Applicants must be legally authorized for employment in the United States. Qualified Applicants will not require employer sponsored work authorization now or in the future for employment in the United States. Direction of Others: May provide general guidance or train lower level support staff. Key Working Relationships: Primarily intra-organizational contacts and some external contacts. 
      General Requirements Job Family Responsibilities: Participates in monitoring of semi-complex materials through the production cycle. Participates in the preparation and maintenance of basic reports; analyzes supplier capability; participates in make/buy studies and cost analyses. Participates in creating integrated project plans and schedules for the supply team's capital and development projects. Participates in the effectiveness evaluation of current material control standards. Supports the planning and coordination of new product introductions; assess the impact and support changes to overall production schedules. Education: BS/BA in related discipline, or advanced degree, where required, or equivalent combination of education and experience. Certification may be required in some areas. Knowledge and Experience: Demonstrates a good grasp of knowledge and principles of field of specialization and applies through successful completion of assignments. Successfully applies knowledge of fundamental concepts, practices, and procedures of particular area of specialization.Typically 2-5 years of successful experience in related field and successful demonstration of Key Responsibilities and Knowledge as presented above. Advanced degree MAY be substituted for experience, where applicable. 
      Direction of Others: May provide general guidance or train lower level support staff. Key Working Relationships: Primarily intra-organizational contacts and some external contacts. 
      Offer of employment with client is conditioned upon the successful completion of a background check and drug screen, subject to applicable laws and regulations. Equal Employment Opportunity Statement client is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, marital status, family responsibilities, pregnancy, genetic information, protected veteran or military status, other categories protected by federal, state, or local law, and regardless of whether the qualified applicants are individuals with disabilities. EEO is the Law: Applicants and employees are protected under Federal law from discrimination. Click here to learn more..
       
      Job Number: 1710066785
      Job Location: Alpharetta, GA
      Duration: 12 months
      Input Date: 04/14/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Lea Salmo
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i500000021kct&URLSource=cjhunter

      Materials Scheduler

      Description:
      PDS Tech, Inc. is seeking a candidate for the Materials Scheduler position located in Clearwater, FL.

      Job Responsibilities: 

      • Maintain Program Delivery Master Schedule Formats that shows current status and projections to internal plans. 
      • Insure that product end items are loaded and maintained in SAP to reflect internal schedule requirements. 
      • Coordinate with Material Control and the Master Scheduler to insure that appropriate process times are maintained within SAP. 
      • Develop and maintain Product Detail Schedules for reporting status, priorities, accomplishments and projections. 
      • Coordinate program and functional approval of schedules. 
      • Maintain awareness of product schedule status through SAP, status meetings and personal interface to insure that your product is being completed per schedule. 
      • Act as the Program interface for communicating and obtaining product schedule requirements, schedule status and priorities. 
      • Coordinate program resource availability to achieve the product internal schedules. (Master Scheduler/Work Cell PC will coordinate Production/Test resource availability) 
      • Move hardware and expedite/prioritize for things that fall outside of the standard Production/Test processes. (Work Cell PC will handle hardware that is in the Production/Test area) 
      • Lead and coordinate program activities required to prevent, minimize or eliminate schedule delays and impacts. 
      • Develop work around plans where needed. (Work Cell PC will provide info for Production/Test work around plans and projections) 
      • Hold program rundown meetings to communicate schedule status, needs and concerns. 
      • Manager wants to focus on 3+ years of planning/production control experience 
      • This position supports production floor with 80% of the time spent away from the desk. 
      • This role is primarily a Production Scheduler 
      • Key to success is having a solid foundation in production planning and production control. 
      • Communicates and works with the respective department personnel to ensure critical parts are expedited through the required processes. 
      • With on the job training, candidate will support production floor planning in the movement of parts from one work center to another. 
      • Ability to use MS Excel and Access Data Base Tools with prior experience applying these tools in a manufacturing environment. 
      • Collects and analyzes data to evaluate operational difficulties and makes recommendations to solve problems. 
      • Has knowledge of commonly-used concepts, practices, and procedures within a manufacturing environment. 
      Basic Qualifications: 
      • Requires High School Diploma or GED 
      • Must be a US Citizen 
      • Minimum of 3 years working in a manufacturing environment in a planning/production control/production coordination capacity. 
      • 3 years Microsoft Excel experience including expertise with advanced functions such as v-lookups and pivot tables 
      • Highly organized with strong attention to detail. 
      • SAP experience a plus but not required 
      • Working in the Aero industry is a plus but not required 
      • Reports to Production Planning Manager 

      Additional Qualifications: 
      • Bachelor's degree is a PLUS 
      • SAP experience 
      • Documented ability to prioritize daily program work load, with limited supervision. 
      • Excellent organization skills. 
      • Excellent oral and written communications skills 
      • Past experience working under pressure and delivering desired results 
       
       
      Job Number: 1710069568
      Job Location: Clearwater, FL
      Duration: 8 months
      Input Date: 06/19/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Audrei Cortez
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002CmQ9&URLSource=cjhunter

      Materials Scheduler

      Description:
      PDS Tech, Inc. is seeking a candidate for the Materials Scheduler position located in Clearwater, FL.

      Job Responsibilities: 

      • Maintain Program Delivery Master Schedule Formats that shows current status and projections to internal plans. 
      • Insure that product end items are loaded and maintained in SAP to reflect internal schedule requirements. 
      • Coordinate with Material Control and the Master Scheduler to insure that appropriate process times are maintained within SAP. 
      • Develop and maintain Product Detail Schedules for reporting status, priorities, accomplishments and projections. 
      • Coordinate program and functional approval of schedules. 
      • Maintain awareness of product schedule status through SAP, status meetings and personal interface to insure that your product is being completed per schedule. 
      • Act as the Program interface for communicating and obtaining product schedule requirements, schedule status and priorities. 
      • Coordinate program resource availability to achieve the product internal schedules. (Master Scheduler/Work Cell PC will coordinate Production/Test resource availability) 
      • Move hardware and expedite/prioritize for things that fall outside of the standard Production/Test processes. (Work Cell PC will handle hardware that is in the Production/Test area) 
      • Lead and coordinate program activities required to prevent, minimize or eliminate schedule delays and impacts. 
      • Develop work around plans where needed. (Work Cell PC will provide info for Production/Test work around plans and projections) 
      • Hold program rundown meetings to communicate schedule status, needs and concerns. 
      • Manager wants to focus on 3+ years of planning/production control experience 
      • This position supports production floor with 80% of the time spent away from the desk. 
      • This role is primarily a Production Scheduler 
      • Key to success is having a solid foundation in production planning and production control. 
      • Communicates and works with the respective department personnel to ensure critical parts are expedited through the required processes. 
      • With on the job training, candidate will support production floor planning in the movement of parts from one work center to another. 
      • Ability to use MS Excel and Access Data Base Tools with prior experience applying these tools in a manufacturing environment. 
      • Collects and analyzes data to evaluate operational difficulties and makes recommendations to solve problems. 
      • Has knowledge of commonly-used concepts, practices, and procedures within a manufacturing environment. 
      Basic Qualifications: 
      • Requires High School Diploma or GED 
      • Must be a US Citizen 
      • Minimum of 3 years working in a manufacturing environment in a planning/production control/production coordination capacity. 
      • 3 years Microsoft Excel experience including expertise with advanced functions such as v-lookups and pivot tables 
      • Highly organized with strong attention to detail. 
      • SAP experience a plus but not required 
      • Working in the Aero industry is a plus but not required 
      • Reports to Production Planning Manager 

      Additional Qualifications: 
      • Bachelor's degree is a PLUS 
      • SAP experience 
      • Documented ability to prioritize daily program work load, with limited supervision. 
      • Excellent organization skills. 
      • Excellent oral and written communications skills 
      • Past experience working under pressure and delivering desired results 
       
       
      Job Number: 1710069569
      Job Location: Clearwater, FL
      Duration: 8 months
      Input Date: 06/19/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Lea Salmo
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002CmQx&URLSource=cjhunter

      Materials Scheduler

      Description:
      PDS TECH is seeking a Material Scheduler for an open position in Clearwater, FL
      • With on the job training, candidates will support Planning Production Schedules; Materials Monitoring; and review factors which affect schedules. 

      • Collects and analyzes data to evaluate operational difficulties and makes recommendations to solve problems. 

      • Follows established modeling and evaluation processes to determine the effectiveness of current operational activities and to determine problem areas and develop solutions. 
      Basic Qualifications: 

      • Requires a Bachelor's degree. Supplier she hold a copy on file 

      • Must be a US Citizen 

      • Minimum of 3 years working in a manufacturing environment in a materials scheduling/planning/production control/production coordination capacity. 

      • Strong skills with MS Excel and Access Data Base 

      • SAP experience a plus but not required 

      • Working in the Aero industry would also be a HUGE plus but not required 

      • Familiar with standard concepts, practices, and procedures within a manufacturing environment. 

      • Reports to Materials Management Manager 
       
      Job Number: 1710062660
      Job Location: Clearwater, FL
      Duration: 8 months
      Input Date: 01/20/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Lea Salmo
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002G8TJ&URLSource=cjhunter

      Mechanical Assembler

      Description:
      Requires knowledge of mechanical machine assembly. Requires the ability to read engineering drawings.  Must be a team player who is quality oriented. Position requires a quality conscious, industrious individual who pays attention to detail. Applies mechanical ability and mechanical testing procedures to layout, build, test, troubleshoot and modify machinery. Fits and assembles components according to engineering drawings. Possesses knowledge of machine assembly to construct machinery according to work order specifications.  Help with proper operation and alignment of mechanical components such as belts, air cylinders, shafts, motors, ect. Verifies conformance of parts to stock list and engineering drawings using measuring instruments such as calipers, gauges, and micrometers. Verifies alignment and tolerances of moving parts using measuring instruments such as dial indicators and thickness gauges. Sets up and operates a variety of hand tools such as drill press, saws, ect.  Operates tow motor, pallet jack, hoist, and overhead crane to aid in the safe handling of raw materials and fabricated parts.
      Completion of a vocational diploma in mechanics or equivalent training, and/or one to two years experience in machine assembly or similar field.  Capable of reading engineering drawings. Set up and operate a variety of power tools. Must have tools required to perform daily routine.
      1st and 2nd shift positions available.
       
      Job Number: 1710064096
      Job Location: De Pere, WI
      Duration: 6 months
      Input Date: 02/17/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Tyler Belisle
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002GKof&URLSource=cjhunter

      Mechanical Designer

      Description:
      Responsibilities include developing moderately difficult working drawings within company and industry codes and standards, from equipment specifications and detailed drawings.The candidate may provide some layout work or checking under the close supervision and exhibit a complete understanding of the materials and methods normally utilized.  Uses computer-aided design equipment and/or graphic tools.  May assist in the preparation of cost and material estimates, specifications, reports and studies.  May assist in field verification and start-up assignments.
      Training and Experience:  Requires a fundamental understanding and application of technical principles, theories and concepts in the field of Mechanical Design.  Requires an understanding of Manufacturing Practices and material selection.  3-5 years of experience required, drafting/design and related coursework.  AutoCAD software experience a MUST.  SolidWorks software experience a plus.  Microsoft Office software experience.  Associate Degree in Mechanical Design or related field.  May require travel & field support.
       
      Job Number: 1610056995
      Job Location: Green Bay, WI
      Per Diem: No
      Duration: 6 months
      Input Date: 09/29/2016
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Sue Van Pay
      Address: 110 PACKERLAND DR STE A
      City, State: GREEN BAY, WI 54303
      Phone: 920/499-9943
      800 Phone: 800/333-1389
      Fax Phone: 920/499-9067
      Email: cecjgreenbay@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail_logged_in?id=a1i50000002FbEJ&URLSource=cjhunter

      Mechanical Quoting Specialist - RM

      Description:
      Johnson Service Group is looking for a Quotations Specialist that would be responsible for the preparation and analysis of requests for quotes to suppliers (RFQ).

      Essential Functions and Responsibilities:

      • Examine, review and evaluates cost data for accuracy, price competitiveness, and supply.

      • Familiar with a variety of supplier commodities, electronics, sheet metal, packaging, PCBs.

      • Examines pricing and compiles finished quotes to include labor, material, test, overhead and logistics.

      • Performs a variety of complex tasks working with Suppliers, SQE, Supply Chain, Program Managers, etc.

      Qualifications Required/Job Specifications:

      Must have a minimum of (5) five years of experience in EMS, (Electronic Manufacturing Services), Purchasing, Warehouse and Logistics Environment.
      Possess a BA/BS degree in industrial, mechanical or business administration or equivalent experience
      Ability to interpret a variety of instructions written, oral, diagram or schedule form.
      Ability to effectively present information and respond to questions from managers, employees, customers and suppliers.
      Must understand complex pricing negotiations.
      Must have Advanced computer skills with a required
      proficiency MS Office including Word, PPT, and Excel
      (Macros, V-Lookups).
      Strong organizational skills and detail-oriented.
      Manages conflicting priorities in a fast-paced environment.
      Must be self-directed, dependable, and motivated with excellent relationship and time management skills. ERP experience (Preferably SAP)
      Ability to effectively present information and respond to questions from managers, employees, customers and suppliers.
      Possess a high level of integrity in handling confidential and sensitive information.
      Available to work the days and hours necessary to perform all assigned responsibilities and tasks. Must be available (especially during regular business hours or shifts) to communicate with subordinates, supervisors, customers, vendors, and any other person or organization with whom interaction is required to accomplish work and goals.
      Nonessential Skills and Experience:

      Preferred: APICS (American production inventory control society) Certification
      This may include odd hour teleconferences with global facilities.
       
      Job Number: 358762
      Job Location: Milpitas, CA
      Rate: $70k/yr
      Per Diem: no
      Overtime: possible
      Duration: full time
      Start Date: asap
      Input Date: 06/16/2017
      Firm Name: JOHNSON SERVICE GROUP
      Attention: Rich Martinsen
      Address: 950 S BASCOM AVE STE 2122
      City, State: SAN JOSE, CA 95128
      Phone: 408/728-9510
      800 Phone: 866/656-0539
      Fax Phone: 408/271-2701
      Email: rmartinsen@jsginc.com
      Website: www.jsginc.com

      Mechanical and 2D/3D Checking Engineering Contractor (TS I)

      Description:
      Mechanical and 2D/3D Checking Engineering Contractor (TS I)

      Location: Savannah, GA
      Rate: $50.00/HR - $55.00/HR
      Duration: Long Term contract
      Shift: 1st Shift

      Unique Skills:
      -Check 2D engineering data and 3D models for conformance to Company requirements as directed.
      -Check parts for fit, form and function to the extent that information is available.
      -Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed.
      -Checkers are responsible for determining the acceptability of data in the following areas:
      • Accuracy and completeness of engineering product definition data, including CAD and PDM data.
      • Proper application and compliance with all Engineering and customer drawing requirements.
      • Use and understanding of GD & T a must.
      • Dimensioning and tolerancing including familiarity with ASME Y14.5.
      • Application of best drafting and design practices and procedures.
      • Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
      • Advise Design personnel regarding Company drawing and design practices and procedures.
      • Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
      • Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
      • Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
      • Knowledge of Company parts list & PdocM, a plus.

      Essential Duties and Responsibilities:
      • Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
      • Ensures designs meet customer criteria, quality standards and FAA requirements.
      • Adheres to budget and project schedules.
      • Provides design guidance and feedback to other engineering personnel.
      • Other duties as assigned.
      • Knowledge of industry design and documentation standards.
      • Experience with mechanical assemblies and manufacturing technique design.
      • Ability to work independently and cross-functionally.
      • Experience in communicating with employees/teams in productive and efficient manner.
      • Strong communication and problem-solving skills.

      Education and Experience Requirements:
      Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

      Position Purpose:
      Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

      Principal Duties and Responsibilities/Essential Functions:
      1. Contributes to planning, developing and coordinating of important engineering projects
      2. Provides specialized technical assistance to team members
      3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
      4. Determines and develops own approach to solutions within schedule and cost objectives
      5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
      6. Acts as liaison with representatives outside of the assigned group/area

      Additional Functions:
      1. Actively works to improve daily processes and ensures all work meets customer requirements
      2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
      3. Performs other duties as assigned

      Other Requirements:
      1. Advanced degree in engineering related field preferred
      2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
       
      Job Number: 7546
      Job Location: Savannah, GA
      Rate: $50.00 - $55.00/HR
      Per Diem: Possible
      Overtime: Possible
      Duration: LT
      Start Date: ASAP
      Input Date: 06/19/2017
      Firm Name: INCONEN CORPORATION
      Attention: Rex Calkins
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Email: rex@inconen.com
      Website: www.inconen.com

      Mechanical and 2D/3D Checking Engineering Contractor (TS I)

      Description:
      Unique Skills:
      Check 2D engineering data and 3D models for conformance to requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to as directed. Checkers are responsible for determining the acceptability of data in the following areas: • Accuracy and completeness of engineering product definition data, including CAD and PDM data. • Proper application and compliance with all Engineering and customer drawing requirements. • Use and understanding of GD & T a must. • Dimensioning and tolerancing including familiarity with ASME Y14.5. • Application of best drafting and design practices and procedures. • Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts. • Advise Design personnel regarding GAC drawing and design practices and procedures. • Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams. • Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments. • Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements. • Knowledge of GAC parts list & PdocM, a plus. Essential Duties and Responsibilities • Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems. • Ensures designs meet customer criteria, quality standards and FAA requirements. • Adheres to budget and project schedules. • Provides design guidance and feedback to other engineering personnel. • Other duties as assigned. • Knowledge of industry design and documentation standards. • Experience with mechanical assemblies and manufacturing technique design. • Ability to work independently and cross-functionally. • Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills.

      Education and Experience Requirements:
      Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

      Position Purpose:
      Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

      Principal Duties and Responsibilities:

      Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

      Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

      Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
       
      Job Location: Savannah, GA
      Per Diem: Possible
      Overtime: Possible
      Start Date: ASAP
      Input Date: 06/16/2017
      Firm Name: