Job Search Results

918 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2017/12/16 Saturday 05:09AM Pacific Time by ContractJobHunter. )

Listings 1 - 918

Go To My Job Tracker

Expand all descriptions

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2117 - ELECTRICAL WIRING DESIGNERS (EWIS) - cv, word doc only

Description:
Perform as a technical authority in wiring 3D design.

Perform as a technical authority in wiring diagram design.

Review and approve WD documentation and datasets in part or in whole.

Provide technical support on change management implementation (RFC, PCR).

Recommend and approve design changes

Provide technical leadership, coaching, men.toring and training to staff.

Identify and manage technical risks & opportunities.

Support Supervisor to disposition conflicting requests from different stakeholders.

Communicate lessons learned to other community members.


Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have a minimum of 15 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Have experience with Mentor Graphics Logic tool.

Have a strong sense of responsibility and have good organization skills.

Have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM's, RAE documents and BAPS related to harnesses (Client Eng Practices).

Must Know the Harness Configuration Process and can develop associated tools.

Must have mastered CATIA 3D wiring design electrical workbench suite.

Must Master 2D design diagram and schematics.

Must Master Knowledge of wiring parts qualification.

Must Master Knowledge of the wiring design process.

Must Master Knowledge of wiring parts selection in aircraft systems.

Must Master strong communication and negotiation skills.

Must Master excellent troubleshooting skills.

Must Master Knowledge of New EWIS Regulations.

Must be flexible, may be required to contribute by participating to other tasks depending on program needs and demonstrating flexibility to adapt.
 
Job Number: 2117
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2146 - AVIONICS SYSTEM ENGINEER - resume word doc. only

Description:
Perform technical integration activities associated with all Client Avionic systems.

Generate requirements, analyze, review and approve system designs, oversee system integration, coordinate with various Integrated Product Teams/Suppliers, work with all departments for design validation and verification, testing and certification and provide support to certification authorities as required.

Review and approve the suppliers design through participation in the supplier's development, design, manufacture, integration, and verification process.

Assist in functional, integration, qualification, and ground/flight testing of all the Client avionics systems.

Perform ground and/or flight testing activities for Client avionics systems on dedicated specialist test rigs.

Develop testing procedures, perform test preparation and undertake test vehicle validation.

Participate in troubleshooting and develop/implement resolution plans when testing anomalies occur.

Be asked to work on various avionics systems including but not limited to: Auto-flight: Flight guidance, Auto-throttle, Autoland;
Flight Displays: EFIS, EICAS, HUD;
Flight Management Systems (FMS): Navigation, RNP etc.
FANS/LINK 2000
Communications including VHF, CPDLC, HF, SATCOM etc.
Digital Integration: Integrated Modular Avionics, Data-buses ARINC 429, AFDX, TTP etc).
CVR/FDR, Inertial Reference System and other Client secondary Avionics Systems.


University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent.

Must have 15 or more years of relevant aerospace systems experience.

Have a good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Have a good knowledge of RTCA documents DO-178 and DO-160.

Are familiar with part FAR25 / 525 certification process and with the ARP4754 standard.

Have an experience with civil aircraft in a production or maintenance environment (asset).

Have strong communication skills (written and spoken).

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc). Weekend, night and evening shift may be expected.

Occasional business trips to Wichita, KS may occur.
 
Job Number: 2146
Job Location: Mirabel, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2154 - PROJ. ENGINEER - ELECTRICAL WIRING DESIGN - resume word doc only

Description:
Provide project management support for multiple projects dealing with changes to the basic aircraft, options and in-service issues.

Establish the project scope, define implementation strategies & risks and present business cases

Prepare & maintain schedules, cost control & progress reports

Support the Service for the delivery of engineering solutions (drawings, modsums, etc) and ensure functional groups meet their commitments until successful implementation.

Take meeting minutes and actions and insure a proper follow-up to reach goals and expectations

Contribute by participating to other tasks depending on program needs and demonstrating flexibility to adapt.

University degree in engineering and/or a related field and/or minimum of fifteen (15) years equivalent experience in the aerospace industry.

Proven experience in project management and/or project engineering.

Demonstrate superior organizational and leadership skills and feel comfortable in a dynamic and changing work environment.

A high level of communication skills in both French and English is an asset.

Preference will be given to candidates who are PMP members of the PMI (Program Management Institute).

Knowledge of the Client Engineering System and client Change Management process would be an asset.

Knowledge of Electrical Harness Design would be a strong asset.

An understanding of aerospace product certification is an asset.

Must be proficient with MS Office applications including MS Project, Power Point, Excel and Access.

Certification in Project Management is an asset

An understanding of aerospace product certification is an asset.
 
Job Number: 2154
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/31/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2181 - EMC ENGINEERING SPECIALIST - cv - word doc only.

Description:
Analyze new harness designs, assess impact on systems, propose EMC compliance approaches, write/review test plans, test procedures and test reports,

Analyze modifications at aircraft level and check compliance with certification regulations,

Support and witness EMC tests in Canada, United States and Europe as needed

Scope the critical work needed, estimate the time required, plan and execute according to priorities.

Master of Science degree in EMC Engineering, or alternatively a Bachelor's degree in Electrical or Physic

Engineering with five (5) years aerospace experience,

Minimum of five (5) years working experience in EMC/HIRF/Lightning,

You have EMC testing experience,

Minimum of two (2) years working experience with cabling/harness design,

General knowledge of aircraft and harness design,

You have good oral and technical writing skills in English (French is an asset),

Strong communication, troubleshooting and negotiation skills,
 
Job Number: 2181
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 10/03/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2196 - RM&S ENGINEER - resume word doc only please.

Description:
Be part of the Client R,M&S team, for the Client aircraft, and the primary tasks are to conduct aircraft safety and/or system safety activities, and to support all design activities.

Be responsible for RM&S deliverables specific to the assigned systems.

Participate in the, system functional hazard analysis, aircraft and system fault tree analysis, system safety assessment, failure mode and effect analysis and the final R,M&S certification report.

The duties will also require certification activities. This will involve co-ordination of technical issues and resolutions across all Client, Partner/Supplier, Regulatory and Customer parties.

University graduate in electrical/mechanical engineering with at least 15 years R,M&S experience.

Have a strong electro-mechanical background and has an excellent understanding of aircraft performance characteristics, aircraft systems definition, integration, interfaces, component qualification, reliability and safety requirements and certification process of flight controls systems.

Preferably have been directly involved in the aircraft definition and certification.

Must be very cognizant of the relevant Airworthiness Regulations and certification process.

Have the ability to communicate sound technical proposals and work status to senior management, be a team player, a self-motivated person and be able to work under pressure.

Possess a strong sense of responsibility and integrity.

Have good oral and technical writing skills in English are required (French is an asset).

Possess basic knowledge of MS Office.

Knowledge of creating Failure Mode Effect Analysis (FMEA), Fault Tree Analysis (FTA) and Safety Analysis is required.

Aircraft Level System Safety, preferably in Hydro-Mechanical but could also be Electrical Avionics.

Must have Aircraft Level Knowledge of the following:
In-depth aircraft level understanding FMEA - Failure mode and effects analysis
FTA - Fault Tree Analysis, CMA - Common Mode Assessment
CCMR Process - Candidate Certification Maintenance requirement
25.1309 Regulation
ARP4761 Safety process

Software Skills:
CAFTA required
Must be proficient with Excel
MS Access database development would be asset
Microsoft Office Suite
CATIA would be an asset
 
Job Number: 2196
Job Location: Montreal, Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2213 - ELEC. SYS. SCHEMATIC DIAGRAM DESIGN - cv, word doc only

Description:
WILL PROVIDE ADDITIONAL INFO


Bachelor Degree in Aircraft Avionics or Electrical Engineering or Bachelor Degree in Engineering with equivalent work experience in Wiring Integration or Methods.

Minimum fifteen (15) years of relevant working experience in Aerospace .

Knowledge of Mentor Graphics (ESSD) is mandatory.

Have wiring design, wiring installation and/or wiring is a plus.

Must know the Harness Configuration Process.

Must have mastered CATIA 3D wiring design electrical workbench suite.

Possibility for shift work on any day and/or at any time of day Day shift but possibility to work Evening Shift on occasion.
 
Job Number: 2213
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 3+Mths
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2226 - CABINET INTEGRATOR - resume - word doc only

Description:
Act as a specialist in aircraft interior cabinets.

Search for information related to project assignment to the interior and exterior of the aircraft.

Manage customer requests related to customizations of interior options.

Establish technical requirements, mechanical and electrical interfaces and design, integrate, certify, test and troubleshoot the systems described above.

Assume responsibility for Definition engineering deliverables and milestones that the department must meet.

Must be challenge-driven, results-oriented and problem-solving oriented.

Excellent knowledge in design and development of concepts using graphic design software.


Bachelor's Degree in Mechanical or Equivalent Engineering or college with a minimum 5 years of relevant experience.

Familiar with the CATIA V5 3D design tool.

Must have experience in the design or installation of cabinets to be assembled.

You are well organized and focused on projects.

Must have good oral and written communication skills in English and French.

Able to work in a multidisciplinary teams, you adapt easily to changes, and customer satisfaction is your number one priority.

Customer focused, problem-solving and innovative focus as well.

Autonomous, flexible and results-oriented through project management skills.
 
Job Number: 2226
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 10/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2228 - AVIONICS SYSTEMS INTEGRATOR - resume - word doc only

Description:
Responsible, as an Avionics Systems Integrator Specialist, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Challenger aircrafts.

Responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate and define Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Flight Test Center in development and certification tests; witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.


University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent.

Must have at least eight (8) years of relevant experience with the design, development, integration and certification of Avionics systems.

Have a good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Good knowledge of RTCA documents DO-178 and DO-160.

Good knowledge of part FAR25/525 certification process and with the ARP4754 standard.

Experience with civil aircraft and airworthiness authorities.

Systems: Datalink, Flight Management System and Display integration.

Proficient with the use of Microsoft Office software tools to produce presentation and reports.

Ability to work well in a team environment.

Strong communication skills (written and spoken).
 
Job Number: 2228
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 12/15/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2231 - ELECTRICAL HARNESS DESIGNER - resume - word doc only

Description:
Produce and deliver Harness Data Reports based on Digital Mock-up and Mentor Graphics.

Integrate the design of the wire harnesses.

Incorporate changes (RFC, PCR) on the harness data reports.

Contribute to the team effort by meeting the team%u2019s objectives for productivity and quality.

Contribute to other relevant tasks needed to support the team%u2019s objectives.

Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have experience with harness manufacturing or methods.

Have a minimum of 5 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Mentor Graphics Harness XC tool knowledge is the primary requirement.

Also have experience with Catia V5.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Communicate clearly and openly with your team.

Embrace changes and new ideas.

Are persistent to reach your goals.

Seek out and accept feedback.
 
Job Number: 2231
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 12/15/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2236 - INTERIORS INTEGRATOR - cv - word doc only

Description:
Perform engineering integration of cabin systems.

Create engineering requirements to integrate as part of the Functional Tests Engineering Requirements (FTER) and certification documentation related to cabin systems.

Review and approve new cabin systems concepts and prepare related Aircraft integration documentation.

Create required documentation such as technical white papers, functional diagrams, Technical requirement Documents (TRD) and statement of Work (SOW).

Supplier coordination and follow-up.

Provide production support and answer promptly to raised issues according to their assigned priority level.

Perform troubleshooting when required, to minimize issues
impact on customer and/or in production.

Bachelor in Electrical Engineering or equivalent and accumulated at least five (5) years of experience with aircraft mechanical systems.

Experienced with project and Supplier management.

Bilingual (French - English) written and spoken.

Ability to work with minimum supervision, within a multi-disciplinary team.

Proven record of leadership and technical problem solver.

Must be proficient in 3D design with CATIA V5.

Must be customer-oriented with innovative problem solving skills.

Relevant technical experience in interior completion is required.

Knowledge of certification requirements is an asset.

Understanding of interiors products integration in Business (preferred).

Must have design experience in cabinet assembly design and/or cabinet installation.

Experience in interiors completion Design is an asset.

Must be capable of obtaining Design Authority status.
 
Job Number: 2236
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2237 - ELECTRICAL WIRING INTERCONNECT SYSTEM - cv - word doc only

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.

Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical.

Capable of interfacing with wiring diagrams, system, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

Support to Production; respond to RNC.

Provides technical assistance to engineering staff and
contributes to completion of project milestones.

Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.


University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Minimum 11 years of relevant aerospace experience.

Excellent verbal and written communication skills, and computer skills (PC/MS Office) are require.

Must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative.

Must have wiring design, wiring installation and/or wiring troubleshooting experience and you are familiar with ECAD tools & processes.

Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

Must Know the Harness Configuration Process and can develop associated tools.

Must have mastered CATIA V5 3D wiring design electrical workbench suite.

Must Master 2D design diagram and schematics.

Must Master Knowledge of wiring parts qualification.

Must Master Knowledge of the wiring design process.
 
Job Number: 2237
Job Location: Mirabel, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2239 - CABINET DESIGNER - cv. word doc only

Description:
Act as a specialist in a specific system/monument.

Define technical specifications, mechanical/electrical interfaces, design, integrate, certify, test and troubleshoot the above described systems.

Organize and attend design reviews taking into consideration industry regulations, Client Design Practices and requirements.

Be in direct contact with suppliers and responsible for the delivery of quality engineering documentation that meets Client Standards.

Research, design and evaluate new technical concepts or emerging technologies. (Trade Shows, Air Shows, technical exhibitions, etc).

Procure parts and supply instructions drawings to employees to build mock-ups/prototype.

Provide definition engineering in relation with new designs.

Support the creation of Interface Control Drawings (ICD).

Report status, identify and mitigate roadblocks.

Point of contact on a technical level for designers.

Accountable for engineering deliverables and milestones for a group of monuments.

Bachelor's degree in Mechanical Engineering with 5 to 8 year experience.

Knowledgeable in 3D design with CATIA V5.

Organized and project oriented.

Must be bilingual and have good communication skills including good English and French writing and verbal skills.

Are a team player, working in a multidisciplinary team.

Customer-oriented with innovative problem solving skills and you are organized.

Autonomous, flexible and oriented toward result via your project management skill.

Experience and have lead a small group of designers or equivalent.

Have design experience in cabinet assembly design and/or cabinet installation.
 
Job Number: 2239
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 10/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2254- RM & SAFETY ENGINEER - cv. word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Client aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers.

Responsible for reviewing Partner's/Supplier's reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Will be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare & present risk assessments for continued airworthiness queries.

Bachelor's degree in engineering, with at least fifteen (15) years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.)
 
Job Number: 2254
Job Location: Toronto, Canada
Rate: 63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/22/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2260 - SR. ELECTRONIC EQUIPMENT DESIGN ASSURANCE - cv - word doc please

Description:
Ensure, by design and documentation reviews and process audits, that suppliers of electronic equipment follow established industry and regulatory guidelines, and sound engineering practices, in developing airborne embedded software and airborne electronic hardware (AEH), such that their products are safe and certifiable.

Liaise with Transport Canada Civil Aviation (TCCA) and produce the necessary compliance data, in order to confirm that suppliers have satisfied all certification authority requirements for software and AEH.

Review safety analyses, attend design reviews, review supplier documentation, and conduct audits on suppliers' software and AEH development products & processes. Where necessary, you will advise suppliers on action required to make their processes and products safe and certifiable, and will ensure that corrective action is carried out.

Technically lead specifically assigned projects and guide more junior group members in achieving their goals.

Keep abreast of the rapidly changing technology and processes, in order to develop and maintain best product development practices' and processes' requirements for the EEDA discipline.


Minimum, Bachelor's degree in Engineering with a specialization in Software, or a degree in Software Engineering or Computer Science.

Minimum, 11 years experience in the development or verification of real-time airborne embedded software applications in a variety of aircraft systems (using RTCA/DO-178B or equivalent standard).

Have experience in the certification, development or testing of airborne electronic hardware (AEH) according to structured development processes (RTCA/DO-254 or equivalent standard).

For both Software and AEH aspects, you are familiar with industry-recognized Software/Firmware Engineering practices, object oriented design, system safety analyses, ARP4754A and ARP4761, DO-178B, or DO-254.

Have experience of software or firmware requirement and design analysis, of writing and of acting as a peer reviewer of life cycle plans, requirements, designs, code, test cases and procedures.

Able to read and critique high-order software coding languages (procedural & object-oriented) or HDL code, as part of the design review activities.

Have working experience in software quality assurance and software configuration management, or experience with certification authorities%u2019 liaison is an asset.

Have good oral and writing skills in the English language.

Must possess the ability to work with minimum supervision, be a team player, be able to work on various projects simultaneously, and have project organization skills.

Take initiative, strong sense of responsibility and good engineering judgment.

Must be available to travel occasionally at suppliers' sites for dedicated process audits.
 
Job Number: 2260
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2262 - TECHNICAL INTEGRATOR - ENGINEERING SIMULATION (ESIM) - cv - word doc

Description:
Ensure ESIM rig readiness for Integration, Validation and BA Acceptance in Montreal :

Ensure proper integration of aircraft systems real time simulation models (RTI models),

Support tests of systems functionality (ATM), malfunctions (MCD) and performance (ATG),

Coordinate snags disposition between ESIM supplier and Client,

Ensure proper level of functionality and performance in accordance with CFTC requirements (Client Flight Test Center),
Finalize implementation of RFC's/PCR's,
Ensure rig configuration control and conformity.

Adhere to Change Management process: early identification of issues/changes/impact statement,

Ensure proper coordination and working link between Client and ESIM supplier: monitor progress, adjust schedule, shuffle priorities to meet schedule

Support reviews of ATM (Acceptance Test Manuals), MCD (Malfunctions Control Documents) and ATG (Acceptance Test Guidelines),

Solve problems in a timely fashion and with a high level of quality,

For any given mission/assignment/problem to be solved, work with the team to provide:


Bachelor's Degree in Electrical Engineering with 5-8 years of experience in Avionic & Electrical Systems, Systems Simulation and Testing area.

Strong communication skills both in English (written, spoken) and French (spoken).

Strong troubleshooting/problem solving skills.

Have the proper attitude to work with Suppliers.

Must have working knowledge using Microsoft Project and Microsoft Office applications.

Are a strong team player and can demonstrate superior organizational and leadership skills.

Autonomous and able to work with little to no guidance.

Driven by results.

Familiarity with part FAR25 / 525 certification process and with the ARP4754 standard, FAR25 requirements and the qualification rules pertaining to avionics/electrical systems is an asset.

Demonstrate initiative, a strong sense of responsibilities and good technical judgment.
 
Job Number: 2262
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 10/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2263 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv - word doc only

Description:
Support the Client Final Line Assembly by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Hydro-Mechanical related issues (FBW & Control Surfaces, Wing High Lift, Hydraulics, Landing Gear, Brakes), analyze and develop solutions/recommendations and reports. Disposition RFCs and RNCs as required.

Work with the product development team to assists with technical proposal activities, including preparation of written material and presentations. Recommend and approve design changes.

Support flight test activities including the development and approval of Test Definition Sheets, trouble-shooting FTV issues, Problem Report Resolution, Test Witnessing, Test reports review and approval.

Support all development, Safety of Flight and Certification Testing on suppliers test rigs, systems and structures test rigs

Interface with the Design Approval Delegate (DADs and CDADs) to ensure all design activities and decisions meet regulatory requirement to achieve flawless certification.

Develop good working relationships with various departments within Company and with all suppliers.


Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset.

Experience in providing engineering support to the Final Line/ Production.

5-10 years'experience in aircraft Hydro-Mechanical systems (FBW, Flt Ctrl, Hydraulic, Landing Gear).

Conversant with design, qualification and certification test requirements of Aircraft Electrical systems.

Knowledge of control systems including system controllers%u2019 integration and design and Software/Hardware certification (DO-160, DO-178, etc).

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Familiar with Microsoft Office software tools.

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Must have previous experience with fly by wire, wing high-lift or hydraulic systems on Commercial or Business Aircraft.

Must have experience in the definition and certification of at least one complex aircraft control system. Flight Controls/FBW experience would be an asset.

Must have a good understanding of all facets of system definition, integration, and certification and have a good knowledge of aircraft systems and interfaces (e.g., electrical, Hydraulic , Avionics, Auto-Flight, Flight Controls) integration, testing and installation.

Have a good knowledge of data buses, input signal management including monitoring, redundancy management and mode logic, and failure modes and effects.
 
Job Number: 2263
Job Location: Toronto, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/22/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2264 - EMC SPECIALIST - cv - word doc only

Description:
Analyze new systems designs, assess technical impacts, propose EMC compliance approaches, review/approve test plans, test procedures and test reports, and check compliance with certification regulations.

Support and witness EMC tests in Canada, United States and Europe as needed.

Scope the critical work needed, estimate the time required, plan and execute according to priorities.


Master degree in Electrical or EMC Engineering, or alternatively a Bachelor's degree in Electrical or Physics Engineering with eight (8) years aerospace experience.

Have a minimum of eight (8) years working experience in EMC/HIRF/Lightning (FAR 25.981 is an asset).

Have EMC bench testing experience (aircraft testing experience is an asset).

Have a minimum of five (5) years working experience with systems qualification/certification.

Have a general knowledge of aircraft and harness design.

Have good oral and technical writing skills in English (French is an asset).

Have strong communication, troubleshooting and negotiation skills.

Must have a minimum of two (2) years working experience with cabling/harness design.

Must have familiarization with DO160, STD ARP, MIL STD, FAA regulations, as well as other applicable airworthiness regulations.

Must be able to support and witness EMC tests in Canada, United States and Europe as needed.
 
Job Number: 2264
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2266 - AVIONICS SPECIALIST - cv. word doc only please

Description:
Review Systems architecture design to meet Aircraft Design Requirements & Objectives.

Participate in validation and lead verification activities of assigned system requirements.

Manage, review and approve where appropriate, the deliverables of the assigned system.

Plan short to medium term activities required to support development and certification of assigned system.

Chair weekly integrated product development team with cross-functional engineering discipline.

Keep accurate detail records and artifacts.

Write issue papers, advisory circular compliance matrices and certification plan.

Reviews and sign certification design compliance reports.

Reviews and sign electrical system schematics.

Support the flight test program; including witnessing of tests as required.

Bachelor's Degree in a relevant engineering discipline.

Have at least 15 years relevant experience with the design, development, integration and certification of avionics systems; previous experience with Flight Management System, network security, Air Data, Communication / Navigation would be an asset.

Familiarity and understand of pertinent TC, FAA and EASA rules and requirements.

Ability to work well in a team environment.

Available to to travel.

Must have a good knowledge of RTCA documents DO-178 and DO-160.

Must be familiar with part FAR25 / 525 certification process and with the ARP4754 standard.

Must have an experience with civil aircraft and airworthiness authorities (asset).

Must have strong communication skills (written and spoken).

Must have excellent troubleshooting skills.

Workday expectations: Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc).

Mobility: Occasional travel between plants. Must be able to travel to the US and may be required to travel to other plants on occasion.
 
Job Number: 2266
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2270 - FLY-BY-WIRE SYSTEMS ENGINEER - cv. word doc only

Description:
Integration of equipment to the aircraft and development of equipment interface to other systems and structure.

Develop concepts, design approach and philosophy with the system Partner.

Develop, validate and verify technical requirements of the FBW Flight Control System (FCS) electronic controllers and prepare technical requirements documents.

Validate the FBW electronic controller%u2019s hardware definition and oversee their design.

Perform/Review analysis to evaluate concepts feasibility.

Perform trade off studies and life cycle cost analysis.

Oversee the development of electronic controller interface to other systems and structure.

Actively participate to the different peer and design reviews (PDR, CDR, ...) .

Review/Prepare test procedures.

Review/Prepare certification and test reports.

Review supplier qualification documentation and recommend for approval.

Resolve problems arising from the development and certification activities.

University Engineering Degree in electrical engineering (hardware/electronic designs) or equivalent, and have a minimum of 5 years experience in aerospace related field.

Have been directly involved in the definition and certification of at least one aerospace control system.

Possess an excellent understanding of all facets of system definition, integration, and certification and have a good knowledge of aircraft systems and interfaces (e.g., electrical, hydraulic, avionics, auto-flight).

Have a thorough knowledge of electronic controller designs and qualification to aerospace standards.

Strong knowledge of RTCA DO-160.

Good knowledge of RTCA DO-254.

Have a basic knowledge of FBW FCS architecture, input signal management including monitoring, redundancy management and mode logic, failure modes and effects.

Have a basic knowledge of rigorous requirements validation and design verification processes and techniques (ARP4754).

Good knowledge of Part 25 certification process.

Working knowledge of MATLAB/Simulink/Stateflow simulation environment.

Have a good knowledge of MS Office and Requirements Management tools is an asset.

Have excellent oral presentation and technical writing skills in English (French is an asset).

Possess the following soft skills:

Able to work with limited supervision, be organized, a team player, a self-motivated person, Customer focused, and able to work under pressure.

Show initiative, innovation, leadership, a strong sense of responsibility, integrity, adaptability, good interpersonal communication skills, good engineering judgment, and drive for results.
 
Job Number: 2270
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2nd Shift Maintenance Technician

Description:
Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

For consideration to this position, please contact Eric Khassanov at ekhassanov@pdstech.com or 843-277-6611.
 
 


 
Job Number: 1610057656
Job Location: KS City, MO
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FgpWAAS&URLSource=cjhunter

Acceptance Technician - Secret Clearance

Description:
PDS Tech, Inc is seeking a candidate for the Acceptance Technician Secret Clearance position located in Dallas, TX.  
Performs a wide variety of technical tasks in support of processes, engineering, quality control, calibration, laboratories, production/test environment, line maintenance and/or chemical handling.
Tests, troubleshoots, repairs, maintains and installs a variety of electronic, electromechanical, and mechanical, computer, laboratory and scientific systems and/or equipment.
May assist in the development of procedures. Selects, sets up and operates engineering and scientific equipment.
Observes, analyzes and reports test data; and when appropriate makes necessary repairs to equipment.
Utilizes various engineering and scientific drawings, manuals and other related documentation in the performance of their tasks.
May include configuration/data management.
Checks for work correctness.
May assist in directing work, assigning and outlining tasks.
Candidate will also be responsible for training/mentoring junior test technicians. 
 
Required Skills:
• Candidate must have 4 years experience in electronics industry or equivalent military electronics experience
• Ability to work directly from approved procedures, schematics, and verbal instructions
• Ability to troubleshoot electronic circuits to component level and effectively identify failure trends
• Ability to isolate problems between the test environment (test station, interface adapter, test cables, etc.) and the units under test and resolve as necessary
• Select appropriate test equipment and configure it based on test specification
• Able to communicate technical issues by generating comprehensive failure entries which correlate failure modes back to the associated test specification(s)
• Ability to interpret test data (plots, graphs, tabulated parameters, etc.) to determine pass/fail condition and determine when further analysis is needed
• Must work well in a team environment
• Candidate must be experienced in the use of computers and software applications (both desktop and technical).
Must be well versed in computer architectures and data protocols in order to facilitate networking/interfacing with other test equipment
• Lifting up to 25lbs, walking, and could involve stair/ladder climbing at the test range(s)
• Candidate must be willing to work second or third shift
• Candidate must have an active Secret Clearance

Desired Skills:
• Radar or Electronic Warfare (EW) systems knowledge
• Direct experience with Radar System and subsystem (Transmitter, Receiver, Antenna, Signal/Data Processor, Power Supply, etc.) evaluation
• Ability to work in a fast-paced manufacturing/production test environment.

Required Education:
Associates Degree in Electronics Science, Military Electronics training or direct experience in testing and troubleshooting of Radar systems
 
Job Number: 1710072910
Job Location: Dallas, TX
Duration: 18 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Jason Andrzejewski
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023EXqAAM&URLSource=cjhunter

Administrative Assistant 2

Description:
PDS Tech, Inc. is seeking an Administrative Assistant 2 for an open position in Orlando, FL.
In your role, you will:

The Learning Administrator supports the Learning Campus (LC) US Organization initiatives by coordinating and administering courses, programs and corresponding logistics.
This role works closely with the Learning Partners (Program Managers), Project Managers and Program Facilitators and other vendors to understand course requirements to ensure that programs and offerings are properly planned, created in appropriate learning management system (LMS), managed, executed, and closed appropriately.
Learning Administrators also provide on-site support for courses and programs held at their respective location.
Being accessible and a team player are essential to this role with ability to be flexible and work independently.
This is a very fast-paced environment where ingenuity and customer/team collaboration are valued. 

General duties: 
Supports in organizing and maintaining office supplies/files both physical and electronic.
Schedules resources such as people, meetings, appointments, rooms, and equipment; take calls, emails, case and order inquiries, responds to questions, and escalations.
Ability to prioritize and plan multiple tasks for simultaneous projects is key. 

Drafts and edits semi-complex email messages, templates and other correspondence.
Participates in the preparation of reports, spreadsheets and other documentation as required to customers.
Responsible for accurate input and maintenance of course data in learning management systems as well as extracting database information from multiple technological platforms. Willingness to understand and be passionate about the end-to-end learning experience for employees.
MUST have capacity to support Large Volume of course logistics with all associated tasks and activities within the established deadlines and budget.
MUST have MS Office proficiency.
Read/write French is a PLUS. 

Acts as back up support to other Learning Administrators during absence or vacation periods. 
Specific duties: 
Establishing courses in multiple LMS (Learning Management Systems) 
Monitoring course registration and follow up as needed; 
Coordination of external facilitators and internal support; 
Manage both facilitator and ongoing learner correspondence; 
Booking of course venue and coordination (with point of contact) for all program logistics; 
Coordinate catering (on and off-site) as well as course materials management; 
Organizing technical support as required; 
On-site program support as necessary (i.e. classroom setup, assisting with requests during course, managing the venue setup/cleanup); 
Manage off-site logistics with hosting divisional contact, coordinate internal support; 
Respond to customer/learner inquiries regarding class availability and registration/cancellation process; 
Close courses after completion - update learner records as needed and budget documents; 
Participate in annual course planning sessions with Learning partners team members. 
Finance/Accounting Support (billing procedures, PO creation, invoice audits and submissions, reconciliation of course expenses) 
Case & Order gatekeeper and/or support for incoming customer inquiries; 
Procurement - support purchase of class supplies via OneSRM portal and print materials with Siemens vendors. 
Reporting requirements - in support of scheduled and ad hoc requests for essential course/participant data 

Other support duties to be assigned as identified by the Learning Services Team Lead or Program Manager.
 
Job Number: 1710064658
Job Location: Orlando, FL
Per Diem: No
Duration: 7 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Janelie Pizzetulla
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021NMHAA2&URLSource=cjhunter

Administrative Assistant 2

Description:
PDS Tech is seeking an Administrative Assistant for an open position in Roosevelt, Wa. 
In your role, you will: 

  • The Field Administrative Support (FAS) person will assist the site with warehouse logistics and administrative tasks.
  • This includes organizing and maintaining a warehouse, shipping and receiving, documentation review, electronic and physical filing, reporting, compliance paperwork, tool and parts management, facility organization and paperwork reviews. 

  • This position will require forklift operations and prior experience is preferred but not required.
  • This is an ideal position for someone who can operate independently and is a highly motivated self-starter that has an attention to detail.
  • Significant computer work with e-mail, Microsoft Office and SAP is part of the normal working environment.
  • Candidates must be able to work on their feet for long periods and regularly lift 50 pounds.

 
Job Number: 1610048928
Job Location: Roosevelt, WA
Per Diem: No
Duration: 11 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Israel Ireneo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001yV4vAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer – Level 3

Description:
Aeronautical Engineer – Level 3

Location: Lexington, KY
Rate: $55.00 - $75.00/HR
Duration: 6+ month contract
Shift: 1st Shift
Overtime: Exempt

**Candidates must have an Active Secret Clearance or have had one with the last 2 years**

Description
- Evaluates coupled solar radiation, airflow and conduction heat transfer by both classic methods and finite element analysis.
- Knowledge of a wide range of electronics equipment and cooling methods.
- Experienced in idealizing internal air flow and heat conduction paths into simplified representations to achieve efficient analysis.
- Determines appropriate boundary conditions, film coefficients and convection coefficients and is familiar with industry standard documents governing temperature requirements.
- Documents methods, calculations and results comprehensively and clearly, using industry standard substantiation format.

Skill/Experience/Education
Mandatory:
- 11+ years of experience with heat transfer
- Coupled Flow Field and Thermal/ANSYS/BSME

Desired:
FEMAP/Microsoft office suite/Stress Analysis Background
 
Job Number: 7494
Job Location: Lexington, KY
Rate: $55.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 6+ mos
Input Date: 10/30/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Advance Process Engineers - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring Aerospace Advance Process Engineers for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Advance Process Engineer shall evaluate processes and configure Aerospace assembly and sub-assembly systems and develop best practices within the production process.

Job Duties:

• Evaluate and improve on processes in assembly and sub-assembly systems
• Develop innovative solutions
• Work with equipment designers and manufacturing officers to develop a cost-effective and working production process
• Undertake scoping study level trade-off evaluations of process alternatives
• Assist in the preparation of project feasibility level capital and operating costs
• Assist in the development of plans, methods, design, materials handling, manpower requirements, cost analysis and other areas as appropriate
• Review design, management and interpretation of project studies, aimed at understanding the project scope, requirements and performance outcomes
• Search and assimilate information generated by others with the aim of solving relevant project issues
• Provide specialist technical input into team project work
• Provide input and evaluation into recovery estimates
• Act as the process lead on studies and projects
• Develop or bring forward, as appropriate, industry best practices and new technologies
• Oversee the development and maintenance of long and short term processing plans, processing designs and input into project development efforts as appropriate
• Prepare and review project proposals, studies and technical reports
• Oversee the cost effective, safe and timely completion of projects that meet or exceed expectations
• Apply a sound basic knowledge of safety, environment and related issues during the processing of projects
• Has the authority and obligation to stop production in case unsafe working conditions are observed
• Has the obligation to notify the Director IO and the President for Safety related matters requiring immediate attention

Qualifications:

• Bachelor of Applied Science or graduate degree in Engineering or related field
• A minimum of five (5) years’ of related Aerospace experience

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40014
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/07/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace BOM Specialists - Everett, WA

Description:
STS AeroStaff Services is hiring Aerospace BOM Specialists for open positions in Everett, Washington.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Develop and maintain Bill of Materials (BOM) of released engineering drawings for details, assemblies, and installations in order to support the aircraft reconfiguration. Duties will include management of tasks independently with assignments provided by Engineering Procurement Supervisor or Engineering Management.

Job Duties:

• Creates Item Masters & maintains base data
• Creates, maintains and revises base Bill of Material (BOM’s)
• Revises “Scheduled” production BOM(s) & routes as required
• Creates and maintains Top-down-BOM structures
• Process Flam EAMR(s) for Flammability Testing
• Create and maintains Service Bulletin BOM(s)
• Audits and analyzes base BOM(s) and cards as required for accuracy
• Coordinates activities with Production Control, Program Management, Design Engineering, Purchasing, Manufacturing Engineering, Stores/Shipping
• Coordinate part number roll decisions with Engineering
• Processes / incorporates engineering changes and demand changes to base cards
• Coordinates changes by communicating revisions to Purchasing, Stores and Prod Ctrl groups
• Coordinates with Program Manager to meet production order demand release requirements as required
• Researches and analyzes part history
• Communicates and coordinates engineering stop work notices
• Creates and maintains Standard Work Instructions for BOM creation and maintenance
• DBT participation on assigned projects
• Primary Focal for Manufacturing Planning / BOM group on assigned projects
• Performs other duties as assigned

Qualifications:

• High school degree or equivalency required
• A minimum of 3 years’ support experience required based on the duties listed
• Advanced knowledge of Bills of Materials and Planning Structures
• Advanced ability in reading engineering drawings & interpreting process/material specs
• Experience with engineering drawings, i.e. being able to read engineering drawings, parts list and drawing notes
• Customer Focus – solicits and uses feedback for continuous improvement
• Strives for quality and excellence
• Accountability – takes a no excuses approach to making things happen
• Takes responsibility for own actions and results
• Teamwork – Actively assists to move the team toward the completion of goals
• Collaboration - Establishes collaborative relationships to achieve objectives
• Creativity and Innovation - Develops fresh ideas that provide solutions to all types of workplace challenges
• Decision Making and Judgement- Makes timely informed decisions that take into account the facts
• Aerospace or Accounting background
• Ability to work well independently and cross-functionally across multiple organizations and disciplines
• Strong communication, time-management, and problem-solving skills
• Proficient knowledge of MS Office Products (Excel, Word, Project, etc.)
• Establish collaborative relationships to achieve objectives
• Communication – Excellent interpersonal and communication (written and verbal) skills
• Show positive attitude and volunteer for various assignments in order to complete program on schedule and budget
• Self-motivated and multi-tasker

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39991
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Design Engineers - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring Aerospace Design Engineers for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• To design tooling, fixtures or equipment per customer specifications to meet the intended need
• Develop advanced planning on tooling concepts
• Support manufacturing during build phases and resolve any non-conformances in a timely manner
• Utilize CAD software to perform FEA analysis on designs, write FEA reports and provide design feedback to design engineers
• To support and provide feedback on customer RFQ’s
• Assume other accountabilities and duties as assigned by the Leadership

Qualifications:

• Strong CAD (Catia, NX, etc.) design abilities including 3D modeling and complex assemblies
• Experience with and/or knowledge of Tooling Design and Manufacturing, Controls knowledge a plus
• Experience with and/or knowledge of Automated Production Systems a plus
• Ability to effectively prioritize and execute tasks in a high-pressure environment including following on tools during the fabrication, build installation and commissioning phases of the project
• Ability and willingness to travel to any of the customer and Company’s work locations in North America, Europe and Asia, as required by Management
• Must be willing to work extended hours, when necessary, including overtime, weekends and holidays and on night shift, as project and customer demands dictate
• Excellent interpersonal, written and verbal communication skills
• Ability to work with others, including peers and personnel in other departments
• Eligibility for clearance under the Canadian Controlled Goods and the American ITAR requirements
• At minimum a Bachelor of Science in Mechanical or Aerospace Engineering, Masters of Science in an engineering discipline preferred
• PE license preferred, must show ability to attain license
• Minimum 5 years’ experience performing stress analysis utilizing FEA software (Abaqus, Algor, NASTRAN/PASTRAN, etc.) and performing hand calculations

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39985
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineers (Level 3) - Atlanta, GA

Description:
STS AeroStaff Services is currently hiring Aerospace Engineers (Level 3) for open positions in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Support Engineering project development for a wide variety of Avionics, Structures, and Systems Engineering initiatives
• Supporting shop, hangar and line maintenance customers in accomplishing Engineering projects
• Leaving the office environment and going to hangar, line, shop, planning and other support groups to gain details necessary to complete accurate project
• Providing aircraft engineering support to a variety of internal customers and outside suppliers to support Engineering solutions for long term safety/reliability/cost effectiveness
• Reviewing, recommending, and implementing manufacturers' service bulletins and other correspondence to affected fleets
• Reviewing data and recommending and implementing changes as required to improve aircraft reliability
• This position reports to the Engineering Solutions Manager, and work demand will vary based on current departmental needs and priorities among multiple managers
• Develops both strategic and tactical plans that create a safety-conscious environment resulting in employee safety and well-being

Qualifications:

• A bachelor's degree is required
• Prefer candidates have: Bachelor's Degree in Engineering with 3-5 years’ aviation related experience, Master's Degree in Engineering with 1-3 years’ aviation related experience, Ph.D. Degree in Engineering, or 5-9 years’ in a technical aviation related discipline with at least 2-3 years’ in an aviation engineering organization
• Project Management skills or certifications a plus
• Recent college graduates with a degree in Engineering or an aviation-related field will be considered
• Previous airline, military, OEM, or MRO experience with commercial aircraft is strongly preferred
• Familiarity with airline flight operations and support systems, FAR 121 dispatch regulations, computers and programming is desirable
• Works under minimal direction. Independently determines and develops approach to solutions
• Only complex/difficult projects are reviewed upon completion for adequacy in meeting objectives
• Majority of projects require no review
• Solid understanding and wide application of technical principle, theories and concepts as they pertain to his/her job function
• General knowledge of engineering related disciplines outside his/her job function
• Provide feasible alternatives to solve difficult technical problems over a wide scope
• Solutions are imaginative and practical
• SCEPTRE knowledge preferred
• Familiarity with Boeing and Airbus products is favorable
• Project Management experience desirable

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40083
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/13/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Expeditors - Cape Canaveral, FL

Description:
STS AeroStaff Services is hiring Aerospace Expeditors for open positions in Cape Canaveral, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Expedite parts to meet developed estimated completion dates
• Expedite parts through other departments to break any hold factor in support of late part delivery
• Expedite material from the receiving dock, stock rooms and buyers in support of late part delivery and deliver to using department
• Maintain weekly visibility on part shortages
• Support of Data Integrity in Company MRP system
• Control of Non-conforming Material / Return to Inventory / Stock Purge
• Expedite Off-site processing

Basic Qualifications:

• High school diploma is required
• Minimum 3 years’ of experience in a production or manufacturing environment
• Minimum 3 years’ of experience working with an MRP system

Preferred Skills and Experience:

• Experience in aerospace, automotive, or consumer electronics manufacturing
• Minimum 3 years’ of production control experience is required

Additional Requirements:

• Lifting up to 30lbs., standing, climbing, bending, grasping, sitting, pulling, pushing stooping, stretching and carrying are generally required to perform the functions of this position
• Must be available to work all shifts, overtime, and weekends, as required

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39932
Job Location: Cape Canaveral, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 08/30/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Instrumentation Technician

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.The strategic purpose of the Test and Evaluation Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

Responsibilities:

Reading and creating wire diagrams.
Selecting or auditing appropriate sensors given engineering requirements.
Working with customers and engineers to define appropriate instrumentation requirements.
Designing instrument installations and creating installation instructions.
Instrumentation installation.
Evaluating instrumentation installations for function and safety.
Troubleshooting instrumentation problems.
Data acquisition system operation.
Documenting data system practices and procedures.
Generating instructions and operation manuals.
Developing sensor calibration and functional test procedures.
Maintaining calibration records.
Domestic and international travel may be required.
Desired Qualifications:

3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to work interdependently, and lead small groups.
CATIA V experience beneficial.
Experience with data processing and analysis beneficial.
Computer programming experience beneficial.
Proficient in working with Microsoft Office applications including Word and Excel.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Aircraft Painter (35) - OR

Description:
Chipton-Ross is seeking 35 Marine Painters for openings in Portland, OR.

RESPONSIBILITIES:
Looking for Marine painters with experience working on Aircraft or Large Boats.

REQUIRED EXPERIENCE:
- 2-3 years experience
- Electrostatic Spray Gun
- High Pressure Spray Gun
- Mini Jet Spray Gun
- Marine, Auto body or Industrial Painters preferably with HVLP (High Volume Low Pressure) air-fed electro-static paint sprayers.
- At least 2+ years of Industrial and/or Commercial marine/transportation painting experience is highly desired.


ADDITIONAL EXPERIENCE:
Refurbishing experience a big plus.

EDUCATION:
High School Diploma

VARIABLE SHIFT
Shifts are 4- 12 hour shifts.
4 days on, 4 days off

ADDITIONAL:

May pay as low as $15 for an entry level position and if candidate doesn't test as well as expected.
Position may be temp to perm or direct placement, depending on client's needs a candidate's testing.
Client will expect testing for all candidates that they are interested in and show that they have an interest in committing to this opportunity. Client will coordinate and pay for round trip flight to Portland and also give one day of per diem. Skills tests are on Wed, Thurs, Fri. If skills test is passed, client will determine if candidate is Jr. or Sr, and make an offer based on results of testing.

May go up to $22/hour for 2-3 yrs expereince with a STRONG skilll set. Client hopes to move those hired to a Senior Painting position within 3 months, and Senior positions there pay $25.

Shifts are 4- 12 hour shifts. 4 days on, 4 days off with a 10-15% shift differential available.


 
Job Number: 162173
Job Location: Portland, OR
Rate: $22 to $25.00 DOE
Duration: PERM
Input Date: 12/15/2017
Firm Name: CHIPTON ROSS
Attention: Leila Morrow
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmorrow@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airport Staffing & Flight Scheduling Analysts - Seattle, WA

Description:
STS AeroStaff Services is hiring Airport Staffing & Flight Scheduling Analysts in Seattle, Washington.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The contractor will be working a key project to change the FA Open Time Trading rules in JCTE and Crew Exchange, third party vendor systems developed by Jeppesen. The contractor will fulfill two roles on the project, the Project Manager and the Business Analyst. As the project manager, they will document and control scope, track progress, escalate issues, and report progress to stakeholders. As a business analyst, they will review the contract language to be programmed, work with the SMEs to capture requirements in the form of User Stories, capture test scenarios, and manage the user acceptance testing.

Job Responsibilities:

• Review Collective Bargaining Agreement (CBA) language and rules
• Review Prior Business Requirements document as a reference
• Schedule and facilitate Requirements sessions
• Capture Requirements and Rules in the form of User Stories and Acceptance Criteria with SMEs and QA analyst
• Capture Test scenarios for each User Story with SMEs and QA analyst
• Work with SMEs and Vendor developers on tracking and answering questions
• Create a User Acceptance Test Plan
• Schedule and Facilitate User Acceptance testing
• Track defects reported from UAT and triage with SMEs
• Provide assistance to Support team as needed
• Weekly status report
• Communicate to all stakeholders
• Creation of project charter
• Create project plan and timeline with tasks
• Work with project sponsor on Change Management and Training Plan
• Work with project sponsor on creation of support team for go-live

Qualifications:

• Documenting detailed Business Requirements and Rules in the form of User Stories and Acceptance Criteria with SMEs and QA analysts
• Documenting various Testing Scenarios based on User Stories and input from SMEs
• Ability to read and comprehend Collective Bargaining Agreement language and rules
• Creating Test Plans with SME input
• Organize User Acceptance Testing and track progress on testing
• Excellent communication and active listening skills
• Ability to quickly learn new concepts, rules, and systems
• General PM – scoping management, risk management, communication management, change management, cost management, quality management
• Implementation of vendor IT systems
• Ability to fill dual roles on project BA and PM for multiple projects
• Organized

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39840
Job Location: Seattle, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/01/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Airworthiness Inspector Sr

Description:
PDS is seeking a  Airworthiness Inspector Sr  for an open position in Savannah, GA.

The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. 

Essential Functions:
  1. 1. Responsible for all quality control inspections on aircraft/components in the Repair Station.
  2. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
  3. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting.
  4. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components.
  5. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
  6. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
  7. 7. Ensures aircraft/components are airworthy prior to any flight activities.
  8. 8. Mentors technicians on effective documentation. 


Additional Functions:

  • Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, airworthiness Directive status, and Service Bulletin status.
  • Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
  • Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example.
  • Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures.
  • Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft.
  • May perform ODA functions as assigned.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
  • Performs other duties as assigned. 


For Additional Information on this Opening Please Contact
Kellye Roberts
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com

Education and Experience Requirements:



  • High School graduate/GED. Airframe and Powerplant License required.
  • Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.

Other Requirements:

  • Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
  • Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required.
  • Familiar with FAA certification approval processes.
  • Strong written and verbal communication skills. Must be able to effectively prioritize tasks.
  • Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.


Unique Skills:



  • Must be able to support AAP on extended or alternate shifts and weekends.


For Additional Information on this Opening Please Contact
Kellye Roberts
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com

 
Job Number: 1710067773
Job Location: Savannah, GA
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Kellye Roberts
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000012Yk7AAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Analog Design Engineer

Description:
Job Summary:

Lead the development of science instruments for space flight missions; work with scientists and engineers across technical boundaries to develop instrument concept; spearhead new technology development of detectors and electronics in laboratory vacuum systems; travel to the facilities of other instrument team members to participate in design meetings; oversee the process of writing requirement and specification documents; lead the design of flight electronics to meet high-reliability requirements that are necessary for NASA missions; direct the development of prototype experiments in the laboratory; review procedures and oversee comprehensive hardware verification tests; organize and deliver presentations to NASA representatives in formal design reviews; provide support for instrument qualification tests and calibration, including field tests at customer facilities (NASA centers, government labs); participate in commissioning and operation of science instrument after it has been launched into space.

Education/Experience:
Requires a BS degree in Electrical Engineering
Advanced degree (MSEE or equivalent) is desirable/preferred.
Requires 10-15 years of related experience to include strong analog design and analysis skills, a digital design background, and hardware/software troubleshooting.
Must possess the ability to lead and mentor less experienced engineering staff, lead/direct the development of prototype experiments, scientific instruments and spearhead new technology developments; experience with scientific instruments associated electronics and detector systems preferred with the ability to write requirement and specification documents, procedures and conduct comprehensive hardware verification tests; must possess strong communication and presentation skills to deliver presentations to internal as well as external customers (NASA, ESA, commercial). A valid/clear driver's license is required.
This position requires passing the test.

Special Considerations:
Must be a U.S. citizen or Permanent Resident due to ITAR work in section
 
Job Location: San Antonio, TX
Rate: Open
Per Diem: Yes, Split
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 09/13/2017
Firm Name: AMERICAN CONTRACT GROUP
Address: 50 HIGH ST STE 46
City, State: NORTH ANDOVER, MA 01845
Phone: 978/984-5581
800 Phone: 877/723-9087
Fax Phone: 978/208-8246
Website: www.americancontractgroup.com

Apprentice Avionics Harness Technician - (6) - CA

Description:
Chipton-Ross is seeking a Apprentice Avionics Harness Technician for an opening in Hawthorne, CA.

RESPONSIBILITIES:
As an Avionics Harness Technician you will be responsible for fabricating and assembling high quality/high reliability wire harnesses and electro-mechanical assemblies under the instruction of a seasoned Technician. This is a great opportunity to learn more about Avionics for individuals with a strong mechanical aptitude and a passion for working with their hands.
Read, interpret and work from drawings, controlled documentation and processes. Self-monitor work progress against area benchmarks to achieve on time product delivery. Record work performed on shop floor management system (ERP). Perform verification of flight hardware and document results in a clear, precise and complete manner. Assist with area efficiency improvement projects.


REQUIRED EXPERIENCE:
High School Diploma or Equivalent. At least 5 years experience using basic mechanical and/or electronics hand tools. Associates Degree or Technical Certification. Experience working and collaborating in a team environment. Experience preferred in fast-paced production environment with flight quality hardware. Excellent communication (written and verbal) and teamwork skills. Excellent concentration and attention to detail with outstanding work efficiency and accuracy. Participation in STEM (Science, Technology, Engineering and Mathematics) related activities, clubs or groups. Computer literate.
Must be willing to work 1st shift, 7:00 AM 5:30 PM. Must be willing to work overtime and weekends as needed. Must be able to lift and carry up to 40 pounds. Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching are generally required to perform the functions of this position.

EDUCATION:
High School Diploma

WORK HOURS:
-5/50, 1st Shift: 7:00AM - 5:00PM
 
Job Number: 161967
Job Location: Hawthorne, CA
Rate: $DOE
Duration: 3 Months
Input Date: 12/11/2017
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

Assembler - Level 3

Description:
PDS Tech is seeking an Assembler for an open position in Acton, MA

In your role, you will:

    • Ability to accept various assignments in a non-structured, erratic production environment. 

    • Will be reporting to the Production Manager. 

    • Assembles fabricated parts at floor stations. 

    • Tests and calibrates parts and mechanisms to meet tolerances and product specifications. 

    • Uses hand tools and power tools to assemble units according to product specifications. 

    • Identifies units that fail tests or tolerance levels and repairs as necessary. 
    • HS Diploma or GED required 

    • Steel toed shoes required 



    Basic Qualifications: 

    • 1 year of experience in electro-mechanical assembly. 



    Additional Qualifications: 

    • Ability to function as part of a team and contribute to its overall success. 

    • High energy effort to complete tasks, flexibility and capability of working in a constantly changing department. 

    • Basic understanding of analog and digital PCB’s. 

    • Familiar with personal computers and their basic operation. 
     
    Job Number: 1610061012
    Job Location: Acton, MA
    Duration: 6 months
    Input Date: 12/15/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Lea Salmo
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FypSAAS&URLSource=cjhunter

    Assembler - Level 4

    Description:
    PDS Tech is seeking an Assembler for an open position in Clearwater, FL 

    In your role, you will:

      The Assembler / Wire personnel must perform duties to ensure effective wiring and assembly of standard and non standard products
      As our ideal candidate, you will meet the following requirements: 
      • Basic Qualifications: 

        - Due to government regulations, must be a US Citizen 

        - High School Diploma or GED 

        - 5-7 years of Assembler experience (i.e. soldering, wiring & electronics).
        •   Wire harness soldering experience with extensive use under microscope. 

      • IPC-7711/7721 IPC Certification Training 

        IPC/WHMA-A-620 Certification Training 



        Additional Qualifications: 

        - Working knowledge of computers strongly desired 

        - Ability to work with “fine pitch” components & detail chassis wiring. 

        - Position requires the completion of 40hr solder & ESD training certification class. 

        - Experience in Space & Defense manufacturing environment. 

        - Individual is expected to have good verbal and written communications skills. 

        - Candidate must be able to work in a self directed, teaming & continuous improvement environment. 

        - Self-directed teaming skills 

        - Good written & verbal communication skills 

        - Continuous Improvement skills (6-Sigma); greenbelt is a plus 

        - Good Team Player 



       
       
      Job Number: 1610059883
      Job Location: Clearwater, FL
      Duration: 8 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Lea Salmo
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FscDAAS&URLSource=cjhunter

      Assembler - 2nd shift

      Description:
      PDS Tech, Inc. is seeking an Electro-Mechanical Assembler for an open position in Lincolnton, NC.
       

       
      Job Number: 1710064335
      Job Location: Lincolnton, NC
      Duration: 6 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Roger Greco
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GMAeAAO&URLSource=cjhunter

      Assembler Level - 1

      Description:
      PDS Tech, Inc. is seeking a candidate for the Assembler Level -1 for an open position located in Niagara Falls NY.
      Job Description: 
      • Performs a variety of operations to assemble precision electromechanical products such as accelerometers, gyros.
      • Performs tasks such as drilling, reaming, burnishing, and tapping; uses precision measuring instruments to ensure conformance to specified tolerances; disassembles precision assemblies and corrects malfunctions.
      • May assemble and modifies pre-production precision units for engineering personnel as directed.
      • May monitor and verify quality in accordance with statistical process or other control procedures

      Mandatory:
      • High school degree or equivalent
      • Two (2) years experience in using a Microscope to assemble miniature part and or assemblies.
      • Experience working in an ISO/clean room/instrument or medical device manufacturing environment.
      • High level of manual dexterity and attention to detail a must
      • Ability to follow procedures, drawings, manufacturing instructions and specifications, documenting work, controlled documents.
      • Ability to identify product issues.
      • IPC-A-610 and/or IPC J-STD-001 certification is desireable.
      • Previous experience in miniature precision devices is desirable.
      • Quality control experience desirable.
      • Good oral communication skills and ability to work in a team environment. 
      • Electro-Mechanical Assembler = Accelerometer Assembler  


      Desired:

      • High school degree or equivalent, and Two (2) years experience in miniature part (microscope) assembly
      • Experience working in an ISO/clean room/instrument or medical device manufacturing environment.
      • High level of manual dexterity and attention to detail a must.
      • Ability to follow procedures, drawings, manufacturing instructions and specifications, documenting work, controlled documents.
      • Ability to identify product issues
      • IPC-A-610 and/or IPC J-STD-001 certification is desireable.
      • Previous experience in miniature precision devices is desirable.
      • Quality control experience desirable.
      • Good oral communication skills and ability to work in a team environment.

       
      Job Number: 1710066563
      Job Location: Niagara Falls, NY
      Duration: 12 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Earl Sawyer
      Address: 2154 N CENTER ST STE 405D
      City, State: NORTH CHARLESTON, SC 29406
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000021jbIAAQ&URLSource=cjhunter

      Assembler/Integrator

      Description:
      PDS Tech is seeking a candidate for the Assembler/Integrator position located in Madison, AL.  
      The successful candidate will be required to perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies.
      Additional duties will include printing labels required for unit identification, serialization, revision level, and cage code information.
      Experience with Bartender label printing software (or similar), Intermec and Rayjet laser printers desired.
      Some knowledge of Microsoft Office Suite programs. 
      May conduct quality inspections on the production line in accordance with quality specifications.
      May disassemble, modify, rework, reassemble, and test production or prototype assemblies and subassemblies according to specifications including bills of material and work instructions. Experience working from drawings and diagrams. 

      Basic Requirements:
      • Must be a team player
      • Strong interpersonal skills.
      • Must be able to work in a fast paced environment.
      • Must have strong communication skills 

      *# of Years Experience 2 years additional education and/or experience 
        
      *Educational Requirements:  High School 
        
      *Please specify any Other Details/Requirements for this position: US CITIZENSHIP IS REQUIRED 
       
      Job Number: 1710067532
      Job Location: Madison, AL
      Duration: 12 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Enrique Perez
      Address: 3201 CHERRY RIDGE DR STE A103
      City, State: SAN ANTONIO, TX 78230-4824
      Phone: 210/524-1496
      800 Phone: 866/570-1503
      Email: cecjsanantonio@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000012RlqAAE&URLSource=cjhunter

      Assembler- MA

      Description:
      Chipton Ross is seeking an Assembler in Marion, MA

      Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

      Mandatory:
      Ability to read/comprehend MEIs, PWIs and manufacturing prints supplied and assemble various products meeting IPC 610 standards and customer requirements.

      Desired:
      Soldering experience, Ability to read/comprehend documentation written in English Good communication skills. Ability to learn and follow written instructions.
       
      Job Number: 160418
      Job Location: Marion, MA
      Rate: $15 to $17.00 DOE
      Duration: 1 year
      Input Date: 12/11/2017
      Firm Name: CHIPTON ROSS
      Attention: Johnnie Barrientos
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: jbarrientos@chiptonross.com
      Website: www.chiptonross.com

      Assembly Tech II

      Description:
      PDS Tech is currently needing Assembly Technicians swing shift in Chandler, AZ.  Please reach out to Jonas Lindner at:  480.212.0845 or jlindner@pdstech.com

      Performs a wide variety of electronic or electro-mechanical assembly operations on assemblies or sub-assemblies.  Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering and cable harnessing on assembly units.  Makes setups and adjustments holding tolerances to blueprint specs.
      Performs specific back-end semiconductor mfg. functions in the production of semiconductor devices.  Operates various equipment in performing functions such as wafer scribe and break, die sort, die attach, lead bonding and seal, test, or mark and pack.
      • Build mechanical assemblies and sub-assembles
      • Must be able to read pneumatic and electrical schematics
      • Responsible for helium leak testing, cabling, module and sub-assembly testing
      • Operates hand and power tools to complete assemblies
      • Reads and interprets work instructions to ensure accuracy of work performed.
      • Interacts with mgmt. and team members to encourage effective communications on production floor
      • Performs standard testing and minor troubleshooting
      • Ensures quality standards are met throughout all steps of the assembly process
      • Attendance is essential
      • Knowledge of operating hand tools, portable power tools and bench tools
      • Strong attention to detail, quality focused and willing to learn
      • Excellent communication skills
      • Basic computer skills and the ability to operate computer terminals
      • 3 plus years experience in mfg./cleanroom environment
      • Performs other duties as required.


       

       
      Job Number: 1710069740
      Job Location: Chandler, AZ
      Duration: 6 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Jonas Lindner
      Address: 1839 S ALMA SCHOOL RD STE 250
      City, State: MESA, AZ 85210
      Phone: 480/929-9922
      800 Phone: 800/657-0997
      Fax Phone: 480/929-9779
      Email: cecjphoenix@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CnlhAAC&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Aviation Cargo Care Representatives - Dallas, TX

      Description:
      STS AeroStaff Services is hiring Aviation Cargo Care Representatives for open positions in Dallas, Texas.

      Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

      Job Duties:

      • Assist Customers with all cargo inquiries received through the Cargo Customer Care Center
      • Support the objectives of Cargo Management, Ground Operations
      • Follows the Basic Principles of Leadership and leads by example in all management practices
      • Entertain and qualify all calls to the Cargo Customer Care Center (CCCC), answering Customer inquiries on cargo policies and procedures
      • Process booking requests for human remains shipments
      • Process and respond to cargo claims and refund requests, both verbal and written
      • Assist Customers and Cargo Agents with tracing cargo shipments
      • Process new cargo account applications
      • Support and assist Cargo Management with operational projects
      • Provide support to the Area Managers with sales/marketing projects and Customer Relations as needed

      Qualifications:

      • High School diploma or equivalency required
      • College course work or degree would be an asset
      • Experience Experience handling inbound telephone Customer Service and/or sales preferred
      • Knowledge of air cargo policies and procedures would be an asset
      • Ability to perform physical activities such as lifting, standing, sitting, driving, pulling, pushing, squatting, hearing, climbing, walking, kneeling, reaching, crawling writing, and speaking
      • Ability to type and/or use a computer keyboard with sufficient speed and accuracy to meet demands of job
      • Must be aware of hazardous situations and be able to handle emergencies as needed
      • Must be able to comply with Company attendance standards as described in established guidelines
      • Possess excellent organizational skills; including file maintenance and reporting
      • Ability to solve problems by asking fact finding questions and utilizing multiple data sources
      • Must be able to handle multiple situations simultaneously and difficult/demanding Customer Service issues
      • Must communicate effectively by telephone
      • Strong written communications skills
      • Written communication (including email) must be professional in tone and audience appropriate
      • Must be proficient in the use of current software, i.e. Microsoft Office (e.g., Outlook, Excel, Word, Access, and PowerPoint), Cargo point of sale system, Salesforce, etc.
      • Must be able to utilize multiple applications simultaneously
      • Must meet confidentiality expectations as to confidential, proprietary and sensitive Company information
      • Must be available to work a variety of shifts
      • Must be able to travel occasionally and work extended hours on an as needed basis
      • Must maintain a well-groomed appearance
      • Must be a U.S. citizen or have authorization to work in the United States as described by the Immigration Reform act of 1986

      Benefits:

      STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

      We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

      Thanks for taking the time, and we look forward to hearing from you soon.
       
      Job Number: 39984
      Job Location: Dallas, TX
      Rate: DOE
      Per Diem: No
      Overtime: Possible
      Duration: Temp
      Start Date: ASAP
      Input Date: 09/06/2017
      Firm Name: STS AEROSTAFF SERVICES
      Attention: STS AeroStaff Services
      Address: 2000 NE JENSEN BEACH BLVD
      City, State: JENSEN BEACH, FL 34957
      800 Phone: 877/707-5767
      Fax Phone: 877/707-5767
      Website: www.stsaviationgroup.com

      Aviation Mechanics - Clearance

      Description:
      Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

      Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
      Several Openings For:
      • General Mechanic
      • Electrical
      • Structures
      • Avionics Tech
      • Quality Inspection
      • Supply Chain Specialist


      Great Opportunity for Ex-military/Exiting Military/ and Veterans
      Previous military experience a plus!


       
      Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
      Required- Minimum of 5 years' experience working on 747 platform.
      Tools: no tools required
      Location: San Antonio, Texas

      ***Current Security Top Secret Clearance required
      US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

      **submittal must reference Job ID number 1710063637

      Camille Zunker- czunker@pdstech.com
       
      Job Number: 1710063637
      Job Location: San Antonio, TX
      Duration: 12 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Camille Zunker
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Aviation Program Managers - Elk Grove Village, IL

      Description:
      STS AeroStaff Services is hiring Aviation Program Managers for open positions in Elk Grove Village, Illinois.

      Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

      Qualifications:

      • A new graduate with an engineering or program management degree is highly preferred; however, a candidate with no degree is acceptable as long as they have 5-10 years’ of program management experience
      • Aviation experience is preferred, but is not necessary
      • Automotive or customer service experience is also a plus

      Benefits:

      STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

      We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

      Thanks for taking the time, and we look forward to hearing from you soon.
       
      Job Number: 39962
      Job Location: Elk Grove Village, IL
      Rate: DOE
      Per Diem: No
      Overtime: Possible
      Duration: Temp
      Start Date: ASAP
      Input Date: 09/01/2017
      Firm Name: STS AEROSTAFF SERVICES
      Attention: STS AeroStaff Services
      Address: 2000 NE JENSEN BEACH BLVD
      City, State: JENSEN BEACH, FL 34957
      800 Phone: 877/707-5767
      Fax Phone: 877/707-5767
      Website: www.stsaviationgroup.com

      Avionics / Elec Techs

      Description:

       PDS TECH INC is currently looking for 4 Avionics Techs for our Long Beach customer.
      2 on 1st shift and 2 on 2nd shift

      If you are interested and available, please call 1-800-234-8644 x 20210
      Send resume to: KPelonis@pdstech.com


      Education and Experience Requirements:


      High School graduate/GED. A & P license, FCC license or NCATT certification preferred.
      Four (4) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.


      Position Purpose:



      Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements. 

      Principal Duties and Responsibilities:

      Essential Functions:
      1. Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
      2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
      3. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
      4. Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
      5. Performs and complies with engineering changes and modifications as required.
      6. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
      7. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
      8. Tests and maintains test equipment, electronic systems, and components.
      9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
      10. Adapt to sudden schedule changes. 

      Additional Functions:
      1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
      2. Performs other duties as assigned. 

      Other Requirements:
      1. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
      2. Ability to read and interpret basic blueprints and schematic diagrams.
      3. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
      4. Must be able to climb stairs and ladders, work in confined areas and lift up to 80 pounds.




       



       



       
      Job Number: 1710067142
      Job Location: Long Beach, CA
      Per Diem: No
      Duration: 6 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Karla Pelonis
      Address: 3130 S HARBOR BLVD STE 100
      City, State: SANTA ANA, CA 92704
      Phone: 714/540-7900
      800 Phone: 800/234-8644
      Fax Phone: 714/540-8092
      Email: cecjcostamesa@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000021mnUAAQ&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Avionics Electrical Engineer - Custom Engineering

      Description:
      Avionics Electrical Engineering Consultant- Custom Engineering

      Location: Savannah, GA
      Rate: $61.00 - $68.00/HR
      Duration: Long Term contract
      Shift: First

      Unique Skills:
      -Must be able to substantiate experience at creating engineering design/compliance data that's complaint to FAA/Company ODA requirements.
      - Looking for a seasoned/experienced electrical engineer/designer/integrator with Company experience on GIV, GV, G450, G550 and if possible G650.
      - Having GII and GIII and MidCabin experience is a bonus.
      - The person needs to be proficient in AutoCad and as a bonus either CATIA and or SmarTeam.
      - Mainly AutoCad and of course experience using Microsoft Word/Excel.
      - Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing.
      - Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

      Education:
      Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

      Position Purpose:
      Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services.

      Principal Duties and Responsibilities: Essential Functions:
      1. Contributes to planning, developing and coordinating of important engineering projects
      2. Provides specialized technical assistance to team members
      3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
      4. Determines and develops own approach to solutions within schedule and cost objectives
      5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
      6. Acts as liaison with representatives outside of the assigned group/area

      Additional Functions:
      1. Actively works to improve daily processes and ensures all work meets customer requirements
      2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
      3. Performs other duties as assigned
      Other Requirements:
      1. Advanced degree in engineering related field preferred
      2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
       
      Job Number: 7314
      Job Location: Savannah, GA
      Rate: 61-68
      Per Diem: Yes
      Overtime: Possible
      Duration: LT
      Start Date: ASAP
      Input Date: 11/10/2017
      Firm Name: INCONEN CORPORATION
      Attention: Rex Calkins
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Website: www.inconen.com

      Avionics Electrical Engineers

      Description:
      Jets experience a plus
       
      Job Location: Midwest
      Input Date: 01/14/2015
      Firm Name: ADVANCED TECHNOLOGY
      Address: 15 KENNETH MINER DR
      City, State: WRENTHAM, MA 02093
      800 Phone: 877/334-7700
      Fax Phone: 877/335-7700
      Email: jmac@advancedtechno.com
      Website: www.advancedtechno.com

      Avionics Electrical Engineers

      Description:
      Jets experience a plus
       
      Job Location: Southeast
      Input Date: 01/14/2015
      Firm Name: ADVANCED TECHNOLOGY
      Address: 15 KENNETH MINER DR
      City, State: WRENTHAM, MA 02093
      800 Phone: 877/334-7700
      Fax Phone: 877/335-7700
      Email: jmac@advancedtechno.com
      Website: www.advancedtechno.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Avionics Engineer

      Description:
      A leading Aerospace company, located in Canoga Park, CA, is seeking a Principal Engineer - Avionics, for a 8+ month contract role.

      ** Candidates must be U.S. Citizens **
      ** Permanent residents are NOT eligible for this role **
      ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

      -Support Electro-Mechanical Packaging of complex electrical/electronic assemblies required.
      -Extensive experience in Creo design required.
      -Candidate must have strong GD&T and tolerance analysis skills required.
      -Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.
      -Experience in design of cables and harnesses for applications for Aerospace products.
      -Proficiency in use of Creo PDM/Link and Windchill.
      -Proficiency in generating drawings is required.

      Skills:
      -Electronic-Mechanical Packaging Design a must.
      -ProE/Creo CAD design a must.
      -GD&T a must.
      -Electronic packaging design for harsh environments.
      -Design of cables and harnesses.
      -Drawing Generation.
      -Tolerance Stack-up analysis.
      -Creo PDM/Link and Windchill.

      Education:
      -BSME with 10 years of experience or 15 + years of equivalent experience.
       
      Job Number: 12241
      Job Location: Canoga Park, CA
      Rate: Open
      Per Diem: Yes
      Overtime: Possible
      Duration: 8 Months+
      Start Date: October
      Input Date: 10/30/2017
      Firm Name: LOGIN CONSULTING SERVICES
      Attention: Tali Lerea
      Address: 300 CONTINENTAL BLVD STE 530
      City, State: EL SEGUNDO, CA 90245-5067
      Phone: 310/607-9091
      Fax Phone: 310/607-9818
      Website: www.loginconsult.com

      Avionics Installer

      Description:
      Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems.
       
      Essential Functions:
      1. Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings.
      2. Maintains required logs and records.
      3. Completes tasks within allotted time frame.
      4. Ensures that work accomplished meets applicable regulatory requirements and customer specifications.
      5. Checks all work and ensures a defective free assembly prior to final inspection.
      6. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
      7. Maintains a neat and orderly work area.
       
      Additional Functions:
      1. Properly care for and maintain shop equipment and tools as assigned by Supervisor.
      2. Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.)
      3. Performs other duties as assigned.
       
      Education and Experience Requirements:
      High School diploma/GED. Knowledge of applicable regulatory requirements and customer specifications.
      Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience.
      Ability to read and interpret basic blueprints and schematic diagrams.
      2nd Shift
       
       
      Job Number: 1710073184
      Job Location: Westfield, MA
      Duration: 12 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Tyler Belisle
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000023FeeAAE&URLSource=cjhunter

      Avionics Installer- 1st shift

      Description:





      PDS TECH INC is currently looking for Avionics Installers for our customer in Long Beach

      If you are interested and available, please call Karla Pelonis (800) 234-8644 x 20210 and forwarded your updated resume to kpelonis@pdstech.com

       



      Avionics installation or maintenance history required. Computer literate required. 



      Education and Experience Requirements:



      High School diploma/GED. Knowledge of applicable regulatory requirements and customer specifications. Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience. Ability to read and interpret basic blueprints and schematic diagrams.


      Position Purpose:



      Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems. 

      Principal Duties and Responsibilities:

      Essential Functions:
      1. Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. 2. Maintains required logs and records.
      3. Completes tasks within allotted time frame.
      4. Ensures that work accomplished meets applicable regulatory requirements and customer specifications.
      5. Checks all work and ensures a defective free assembly prior to final inspection.
      6. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
      7. Maintains a neat and orderly work area. 

      Additional Functions:
      1. Properly care for and maintain shop equipment and tools as assigned by Supervisor.
      2. Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.)
      3. Performs other duties as assigned. 

      Other Requirements:
      1. Strong written and verbal skills required.
      2. Computer skills and general software knowledge necessary.





       





       
      Job Number: 1710072940
      Job Location: Long Beach, CA
      Per Diem: Yes
      Duration: 12 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Karla Pelonis
      Address: 3130 S HARBOR BLVD STE 100
      City, State: SANTA ANA, CA 92704
      Phone: 714/540-7900
      800 Phone: 800/234-8644
      Fax Phone: 714/540-8092
      Email: cecjcostamesa@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000023EakAAE&URLSource=cjhunter

      Avionics Installer- 2nd shift

      Description:





      PDS TECH INC is currently looking for Avionics Installers for our customer in Long Beach

      If you are interested and available, please call Karla Pelonis (800) 234-8644 x 20210 and forwarded your updated resume to kpelonis@pdstech.com

       



      Avionics installation or maintenance history required. Computer literate required. 



      Education and Experience Requirements:



      High School diploma/GED. Knowledge of applicable regulatory requirements and customer specifications. Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience. Ability to read and interpret basic blueprints and schematic diagrams.


      Position Purpose:



      Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems. 

      Principal Duties and Responsibilities:

      Essential Functions:
      1. Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. 2. Maintains required logs and records.
      3. Completes tasks within allotted time frame.
      4. Ensures that work accomplished meets applicable regulatory requirements and customer specifications.
      5. Checks all work and ensures a defective free assembly prior to final inspection.
      6. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
      7. Maintains a neat and orderly work area. 

      Additional Functions:
      1. Properly care for and maintain shop equipment and tools as assigned by Supervisor.
      2. Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.)
      3. Performs other duties as assigned. 

      Other Requirements:
      1. Strong written and verbal skills required.
      2. Computer skills and general software knowledge necessary.





       





       
      Job Number: 1710073124
      Job Location: Long Beach, CA
      Per Diem: Yes
      Duration: 12 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Karla Pelonis
      Address: 3130 S HARBOR BLVD STE 100
      City, State: SANTA ANA, CA 92704
      Phone: 714/540-7900
      800 Phone: 800/234-8644
      Fax Phone: 714/540-8092
      Email: cecjcostamesa@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000023FS4AAM&URLSource=cjhunter

      Avionics/Electrical Technician

      Description:
      Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.

      Essential Functions:
      1. Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
      2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
      3. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
      4. Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
      5. Performs and complies with engineering changes and modifications as required.
      6. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
      7. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
      8. Tests and maintains test equipment, electronic systems, and components.
      9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
      10. Adapt to sudden schedule changes.
       
      Education and Experience Requirements:
      High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Four (4) year’s experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.
       
      1. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
      2. Ability to read and interpret basic blueprints and schematic diagrams.
      3. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
      4. Must be able to climb stairs and ladders, work in confined areas and lift up to 80 pounds.
       
       
      Job Number: 1710073185
      Job Location: Westfield, MA
      Duration: 12 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Tyler Belisle
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000023FejAAE&URLSource=cjhunter

      Avionics/Electrical Technician

      Description:
      Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.

      Essential Functions:
      1. Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
      2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
      3. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
      4. Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
      5. Performs and complies with engineering changes and modifications as required.
      6. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
      7. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
      8. Tests and maintains test equipment, electronic systems, and components.
      9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
      10. Adapt to sudden schedule changes.
       
      Education and Experience Requirements:
      High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Four (4) year’s experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.
       
      1. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
      2. Ability to read and interpret basic blueprints and schematic diagrams.
      3. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
      4. Must be able to climb stairs and ladders, work in confined areas and lift up to 80 pounds.
       
       
      Job Number: 1710073186
      Job Location: Westfield, MA
      Duration: 12 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Tyler Belisle
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000023FetAAE&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Avionics/Electrical Engineer

      Description:
      Unique Skills:
      Looking for a seasoned/experienced electrical engineer/designer/integrator. The person needs to be proficient in AutoCAD and as a bonus either CATIA and or SmarTeam. Mainly AutoCad and of course experience using Microsoft Word/Excel. Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing. Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

      Education/Experience:
      Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

      Principal Duties and Responsibilities:
      1. Contributes to planning, developing and coordinating of important engineering projects
      2. Provides specialized technical assistance to team members
      3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
      4. Determines and develops own approach to solutions within schedule and cost objectives
      5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
      6. Acts as liaison with representatives outside of the assigned group/area
       
      Job Number: 24-168
      Job Location: Savannah, GA
      Rate: $61-$68/hr.
      Per Diem: YES
      Overtime: YES
      Duration: 1 YR+
      Start Date: ASAP
      Input Date: 11/13/2017
      Firm Name: PRECISION PERSONNEL INC
      Attention: Matt
      Address: 600 CLEVELAND ST STE 700
      City, State: CLEARWATER, FL 33755
      Phone: 727/449-0600
      800 Phone: 877/600-2333
      Fax Phone: 727/449-0627
      Website: www.precisionpersonnel.com

      Avionics/Electrical Engineer

      Description:
      -Holiday Pay
      -Longevity Pay
      -Medical/Dental Insurance
      -Weekly Pay
      -Identity Theft Protection
      -401(k) Immediate Enrollment
      -Direct Deposit

      PDS is an equal opportunity employer
      EOE M/F/D/V (minorities, female, disabled, veterans)
       
      Job Location: Savannah, GA
      Input Date: 09/26/2017
      Firm Name: PDS TECHNICAL SERVICES
      Address: 3922 COCONUT PALM DR STE 100
      City, State: TAMPA, FL 33601
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: www.pdstech.com

      Buyer (2) - FL

      Description:
      Chipton-Ross is seeking a Buyer (2) for an opening in Naples, FL.

      RESPONSIBILITIES:
      Obtains the best quality, service, and value for products and services through effective bidding, negotiation, and supplier management. Identifies manufacturing needs, identifies and selects suppliers, initiates purchase orders, and arranges for delivery. Provides parts, equipment, services, and materials of limited scope and complexity.

      REQUIRED EXPERIENCE:
      2. May have limited prior industry experience or worked with direction in student internship programs. 3. Certificate in Purchasing Management (CPM) preferred.4. Knowledge of key purchasing and negotiating methods, principles and concepts and general business operations. 5. General knowledge of legal and regulatory requirements related to procurement. 6. Basic understanding of continuous improvement techniques and methods. 7. Ability to use standard business application software and specialized purchasing and/or materials systems (e.g. electronic data interface (EDI) or manufacturing resource planning (MRP) systems). 8. Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, and percentages. 9. Ability to research and analyze data and develop recommendations or resolve problems by drawing on internal information and referring to prior decisions. 10. Ability to work with only general work direction and instructions regarding the scope of assignments and determine priority and order of assignments. 11. Ability to read, analyze, and interpret financial reports. 11. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. 12. Ability to define problems, collect data, establish facts, and draw valid conclusions. 13. Ability to negotiate effectively to obtain the best price and terms. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.

      EDUCATION:
      Bachelors degree (BA) in Business Administration or related field (MUST), Professional entry level position.

      WORK HOURS:
      1st Shift, Full-Time

       
      Job Number: 165172
      Job Location: Naples, FL
      Rate: $20.42 to $27.81 DOE
      Duration: 5 Months
      Input Date: 12/11/2017
      Firm Name: CHIPTON ROSS
      Attention: Silmese Graves
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: sgraves@chiptonross.com
      Website: www.chiptonross.com

      CATIA Instructor

      Description:
      PDS is seeking an CATIA Instructor for an open position in Savannah, GA

      In your role, you will:


      Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of the Client's products and services 

      Essential Functions:
      1. Formal Classroom instruction experience required for CATIA and PDM.
      2. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
      3. Is consulted extensively by associates and others as a recognized authority within the field
      4. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
      5. Approach to problem solving balances technical product, cost and schedule
      6. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
      7. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative 


      Additional Functions:

      • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
      • Performs other duties as assigned 


      Education and Experience Requirements:


      Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

      Other Requirements:

      • Formal Classroom instruction experience required for CATIA and PDM.
      • Advanced degree in engineering, or related curriculum preferred
      • The level of technical skill and abilities appropriate for this grade will be established by each discipline


      Unique Skills:



      CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.

      POC:  Clyde (813)426-9917 or ccallwood@pdstech.com 
       


       
      Job Number: 1610056929
      Job Location: Savannah, GA
      Duration: 6 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Clyde Callwood
      Address: 3922 COCONUT PALM DR STE 100
      City, State: TAMPA, FL 33601
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FavrAAC&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Calibration Technician -

      Description:
      JSG is looking for a Calibration Technician for a 15 Month Contract Opportunity with our client in Coatesville, PA


      ASSIGNED DUTIES:

      Recall calibrated tooling periodically in accordance with company's master calibration schedule.
      Send complex calibrated tooling out to a calibration vendor for periodic inspection/maintenance.
      Perform simple calibrations in-house in accordance with Sikorsky and NIST (National Institute of Standards and Technology) procedures.
      Maintain certification documentation for each piece of Sikorsky PA’s calibrated tooling.
      Follow broad instructions and general methods to work from metrology procedures and standards, tool designs, engineering drawings, etc., to perform inspection and calibration duties.
      Set up and operate a variety of precision gages and instruments, and perform complex layouts, to inspect and calibrate tools to metrological standards.
      Repair, adjust micrometers, height gages, vernier calipers
      Maintain close liaison with other departments to resolve metrology problems.
      Troubleshoot/repair testing equipment; have a working knowledge of electricity, circuitry, and mechanical components.
      Demonstrate knowledge of the technical standards for establishing calibration set out by the American Society of Testing and Materials.
      Skills Required:

      Candidate must demonstrate excellent math skills (emphasis on trigonometry and geometry) and be able to analyze numerical data
      Candidate must demonstrate computer literacy; with emphasis on Microsoft Access and Excel for data management.
      Experience Required:

      Minimum High School Diploma or Equivalent Required
      Formal education in Calibration Technology; or American Society for Quality (ASQ) Certified Calibration Technician certification Required
      Demonstrated aerospace metrology experience or Military calibration experience required
       
      Job Number: 358918
      Job Location: Coatesville, PA
      Rate: $21.50hr
      Per Diem: no
      Overtime: Yes
      Duration: 15 months
      Start Date: asap
      Input Date: 10/19/2017
      Firm Name: JOHNSON SERVICE GROUP
      Attention: Rich Martinsen
      Address: 950 S BASCOM AVE STE 2122
      City, State: SAN JOSE, CA 95128
      Phone: 408/728-9510
      800 Phone: 866/656-0539
      Fax Phone: 408/271-2701
      Website: www.jsginc.com

      Circuit Card Assembly Specialist

      Description:
      PDS Tech Inc. is seeking Circuit Card Assembly Specialists for an expanding program in Huntsville, AL.
      • Performs all Circuit Card production assembly operations on electronic/electrical assemblies and subassemblies.
      • Performs simple rework and modification to circuit card parts and assemblies.
      • Provides maintenance on machines and tooling and machine set up tasks to prepare machines for production activity following the machine inspection checklists.
      • Documents results in accordance with applicable procedures.
      • Collects and inputs data for statistical process control analysis.

      Work related skills equivalent to 3 years of circuit card related technical experience
      Associates (2-year) degree in electronics, mechanical or other technical discipline 

      Basic Manufacturing Skills

      Basic Electricity

      Circuit Card Assembly (CCA) experience

      J-standard soldering certified

       
       
      Job Number: 1710072262
      Job Location: Huntsville, AL
      Duration: 12 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Enrique Perez
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000023APlAAM&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Commercial Avionics Systems Engineer -

      Description:
      Johnson Service Group (JSG) is seeking a candidate for a Commercial Avionics Systems Engineer to be an integral part of a small and fast-paced team supporting the engineering projects, product development, and test.

      Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.

      Airframes may include, but are not limited to S-76, S-92 and their derivatives, including integration of new technologies into the S-92.

      Primary Responsibilities

      Development of requirements
      System Integration
      Generation of lab and aircraft test procedures
      Troubleshooting avionics issues on test, production and fielded aircraft
      Support program management reviews
      Beneficial Experience

      FAA and foreign certification (preferred)
      DO-178B, DO-160 and DO-254 processes (preferred)
      Technical project management (preferred)
      Supplier technical management (preferred)
      Pilot or A&P experience (preferred)
      Educational Requirements:

      BS Engineering in a related field w/7+ years relevant professional experience
      Will consider non-degreed candidate's who have equivalent professional experience (11+ years)
       
      Job Number: 356482
      Job Location: Trumbull, CT
      Rate: $56hr
      Per Diem: yes
      Overtime: possible
      Duration: 15 months
      Start Date: asap
      Input Date: 10/19/2017
      Firm Name: JOHNSON SERVICE GROUP
      Attention: Rich Martinsen
      Address: 950 S BASCOM AVE STE 2122
      City, State: SAN JOSE, CA 95128
      Phone: 408/728-9510
      800 Phone: 866/656-0539
      Fax Phone: 408/271-2701
      Website: www.jsginc.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Completions Design Engineer

      Description:
      Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Final Phase Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation.Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area.
       
      Job Number: 24-179
      Job Location: Savannah, GA
      Rate: $58.00 - $63.00
      Per Diem: Yes
      Overtime: Yes
      Duration: 1 Year plus
      Start Date: ASAP
      Input Date: 09/01/2017
      Firm Name: PRECISION PERSONNEL INC
      Attention: Matt
      Address: 600 CLEVELAND ST STE 700
      City, State: CLEARWATER, FL 33755
      Phone: 727/449-0600
      800 Phone: 877/600-2333
      Fax Phone: 727/449-0627
      Website: www.precisionpersonnel.com

      Completions Electrical Design Engineer

      Description:
      • Experience with Aircraft Cabin Interiors and Systems to include but not limited to: Cabin Management System, Cabin Entertainment System, Cabin Lighting, Cabin Switch Controls, Telephone System, Satellite communications, Water System, Waste System, EWIS, Cabin interior monuments and Seats
      • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
      • 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

      Essential Functions:
      • Contributes to planning, developing and coordinating of important engineering projects
      • Provides specialized technical assistance to team members
      • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
      • Determines and develops own approach to solutions within schedule and cost objectives
      • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
      • Acts as liaison with representatives outside of the assigned group/area.
       
      Job Number: 24-183
      Job Location: Savannah, GA
      Rate: $58 - $63
      Per Diem: Yes
      Overtime: Yes
      Duration: 1 Year plus
      Start Date: ASAP
      Input Date: 12/12/2017
      Firm Name: PRECISION PERSONNEL INC
      Attention: Matt
      Address: 600 CLEVELAND ST STE 700
      City, State: CLEARWATER, FL 33755
      Phone: 727/449-0600
      800 Phone: 877/600-2333
      Fax Phone: 727/449-0627
      Email: matt@precisionpersonnel.com
      Website: www.precisionpersonnel.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Component Design Engineer in East Aurora, NY #4916AS

      Description:
      Recruiter to Contact: Adam Salazar
      Job Title: Design Engineer
      Job Number: 4916
      Location: East Aurora, NY
      Compensation: DOE
      Assignment Length: 12 Month
      2 openings

      GENERAL FUNCTION:

      This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components and systems that will become the new products of Moog, Inc. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.

      DIMENSIONS:

      Expected annual production sales from projects: $4M to $10M

      NATURE AND SCOPE:

      A variety of technical functions exist within the Design/Development Engineering Department. Reporting to the division's Chief Engineer typically are Associate Engineers, Development Engineers, Design and Project Engineers, Senior Design and Senior Project Engineers, Senior Staff Engineers, and Principal Engineers, as well as Engineering Managers, Section Heads or Group Leaders. The Design Engineer typically reports to an Engineering Manager, Section Head or Group Leader within the department and on demanding projects he/she might work under the leadership of a Senior Design Engineer. The incumbent receives instructions on specific assignment objectives, complex features, and possible solutions. He/She is expected to make independent and unreviewed decisions on routine technical matters. However, assistance is furnished on unusual problems and work is periodically reviewed for application of sound professional judgment.

      The Design Engineer is a key contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. The products of Moog generally are unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The Design Engineer generally will operate as part of a design/development team, which includes other Department engineers with his/her primary concern being component design. The incumbent must effectively coordinate the work of drafters, technicians, and others who assist in specific assignments.

      In the early stages of a new program, the project team will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations. Under the technical direction of the Engineering Manager, Section Head or the team's lead engineer, the Design Engineer will then guide the evolution of the conceptual design, technical project planning, detail design, and development testing. This requires some travel and the participation in presentations to customers.

      The Design Engineer will apply creative skills to generate designs that fulfill the conflicting requirements of meeting performance goals, robustness over extreme conditions, minimum weight, awkward envelopes, and cost effectiveness. Successful mechanical designs require judicious material selection, effective use of stress analysis, and sometimes design of unique kinematic mechanisms. Successful electrical designs require intelligent component selection and effective use of thermal stress analysis. Circuit designs must be reliable and make optimal use of available space.

      To be considered for the position of Design Engineer, a candidate should have a minimum of an MS Degree, preferably in Mechanical, Aeronautical or Electrical Engineering plus three years of design/development engineering experience. As an alternative, the candidate would have a BS Degree plus six years minimum of design/development engineering experience. To fulfill the demands of design and development of new products the individual must have self-starting instincts and strong analytical skills. A Mechanical Design Engineer should have a good sense of three dimensional spatial orientation and seasoned knowledge of mechanical hardware design. An Electrical Design Engineer should have solid knowledge of circuit design and a wide range of electrical components.

      Basic knowledge of closed loop control systems and good communication skills is also necessary.

      ACCOUNTABILITIES:

      1. Contribute to the development of new product requirements through consulting with customers and sales personnel.

      2. Validate conceptual problem solutions by performing trade studies and analyses.

      3. Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.

      4. Operate as a key element in a team of creative, independent individuals.

      5. Represent Moog in a manner consistent with its technical reputation.

      6. Create reliable designs through a comprehensive experimental development test program.

      7. Document designs, analyses, and test results with accurate and concise repo
       
      Job Number: #4916AS
      Job Location: East Aurora, Ny
      Rate: 50/hr W2 Ceiling rate
      Per Diem: N/A
      Duration: 12 Months+
      Start Date: ASAP
      Input Date: 09/22/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Adam Salazar
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Website: www.midcom.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Components Engineer - Level 2

      Description:
      Components Engineer - Level 2

      Location: Dallas, TX (Grand Prairie, TX)
      Rate: $65.00 - $75.00/HR
      Duration: 1 year contract
      Shift: 1st Shift

      **MUST be a U.S. Citizen**
      **MUST be able to obtain a Secret security clearance**

      Description:
      - Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements.
      - Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components.
      - Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records.
      - Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.


      Skill/Experience/Education
      Mandatory:
      - Must have parts management experience working with designers to select components for use in designs.
      - Must have obsolescence experience working with component lists and industry tools to evaluate part availability and determining path forward when issues are identified.
      - Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
      - Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages.
      - Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance.
      - The candidate will periodically be required to make presentations to program management and customers.
      - Must have ability to obtain a Secret security clearance.


      Desired:
      - Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies.
      - Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.
       
      Job Number: 7584
      Job Location: Dallas, TX
      Rate: $65.00 - $75.00/HR
      Per Diem: Split Possible
      Overtime: Possible
      Duration: 1 yr
      Input Date: 10/06/2017
      Firm Name: INCONEN CORPORATION
      Attention: Patrick O'Neil
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Website: www.inconen.com

      Components Engineer - Level 2 - TX - C

      Description:
      Chipton-Ross is seeking a Components Engineer - Level 2 for an opening in Dallas, TX.

      RESPONSIBILITIES:
      Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.

      REQUIRED EXPERIENCE:
      Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM's, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers.

      PREFERRED EXPERIENCE:
      Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies. Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.

      EDUCATION:
      Accredited High School Diploma/GED

      WORK HOURS:
      9/80, 1st Shift

      MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.


       
      Job Number: 164049
      Job Location: Dallas, TX
      Rate: Up to $75.00 DOE
      Duration: 12 Months
      Input Date: 12/15/2017
      Firm Name: CHIPTON ROSS
      Attention: Kevin Suk
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: ksuk@chiptonross.com
      Website: www.chiptonross.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Components Engineer - Level 2 / Obsolescence / Parts Management / Must have ability to obtain a Secret security clearance TX

      Description:
      159780
      Requirement# MFC-REQ-1421
      Work location Dallas, TX
      Work Week 9/80
      Priority
      Needed Date 07/05/2017
      End Date 07/05/2018
      Number of Resources 1
      Security Clearance Ability to Obtain Secret
      (Prime Contract:, Can start w/o clearance:Yes, Interim Clearance Sufficient:Yes)

      Type of Service: Engineering
      Title: Components Engineer - Level 2
      Description
      Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.

      Skill/Experience/Education
      Mandatory:

      Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers. Must have ability to obtain a Secret security clearance.
      Desired:

      Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies. Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.

      Skill Matrix

      Parts Management Working with designers to select components for use in designs. 0-3 Years Yes
      Obsolescence Work with component lists and industry tools to evaluate part availability and determining path forward when issues are identified. 0-3 Years Yes



      Interview Required Yes
      Max Pay Rate 75.00 USD
      Shift 1st Shift
      OT Allowed No
      Travel No
      Non-Exempt
       
      Job Number: JE-1421
      Job Location: Dallas, TX
      Rate: 75/hr max
      Duration: 12 month contract
      Input Date: 10/17/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Jeana Edrozo
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Website: www.midcom.com

      Components Engineer - Level 2 Level 2- Interim Secret

      Description:
      PDS Tech, Inc. is seeking a Components Engineer- Level 2 for an open position in Dallas, TX.
      Job Description:
      • Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements.
      • Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components.
      • Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records.
      • Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components. 

      Mandatory Skills:
      • Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
      • Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages.
      • Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance.
      • The candidate will periodically be required to make presentations to program management and customers.
      • Must have ability to obtain a Secret security clearance. 
      • Parts Management=  Working with designers to select components for use in designs. 
      • Obsolescence = Work with component lists and industry tools to evaluate part availability and determining path forward when issues are identified. 
      • Must have Interim Secret Clerance.


      Desired Skills:

      • Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies.
      • Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline. 


       
       
      Job Number: 1710070154
      Job Location: Grand Prairie, TX
      Per Diem: No
      Duration: 12 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Dale Hightower
      Address: 2154 N CENTER ST STE 405D
      City, State: NORTH CHARLESTON, SC 29406
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Cq0WAAS&URLSource=cjhunter

      Components Engineer - Level 3- Interim Secret

      Description:
      PDS Tech, Inc. is seeking a  Components Engineer - Level 3 for an open position in Orlando, FL
      Job Description: 

      • Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements.
      • Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components.
      • Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.

      Skills:
      • Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
      • Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages.
      • Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance.
      • The candidate will periodically be required to make presentations to program management and customers. 


      Mandatory Skills:

      • Five years or more of experience in Component Engineering.
      • Must be proficient with computer tools such as MS Excel.
      • Should be comfortable working in a team environment and willing to shadow Senior Components Engineer at the start of the assignment to develop the necessary skills for this position.
      • Also must be able to learn task specific tools such as Q-Star, Partminer and web based obsolescence tools.
      • Must have good communication skills and able to effectively work with manufacturers and other external part suppliers.


       
       
      Job Number: 1710071428
      Job Location: Orlando, FL
      Per Diem: No
      Duration: 12 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Dale Hightower
      Address: 2154 N CENTER ST STE 405D
      City, State: NORTH CHARLESTON, SC 29406
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i5000000237hoAAA&URLSource=cjhunter

      Components Engineer - Level 3

      Description:
      Location: Orlando, FL
      Rate: $40.00 - $45.00/HR
      Duration: 1 year contract
      Shift: 4x10

      **MUST have an Active Secret Clearance or have had one within the last two (2) years**

      Description
      - Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements.
      - Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components.
      - Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records.
      - Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.

      Skills:
      - Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
      - Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages.
      - Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance.
      - The candidate will periodically be required to make presentations to program management and customers.

      Skill/Experience/Education
      Mandatory:
      - Five years or more of experience in Component Engineering.
      - Must be proficient with computer tools such as MS Excel.
      - Should be comfortable working in a team environment and willing to shadow Senior Components Engineer at the start of the assignment to develop the necessary skills for this position.
      - Also must be able to learn task specific tools such as Q-Star, Partminer and web based obsolescence tools.
      - Must have good communication skills and able to effectively work with manufacturers and other external part suppliers.
       
      Job Number: 7694
      Job Location: Orlando, FL
      Rate: $40.00 - $45.00/HR
      Per Diem: Split Possible
      Overtime: Possible
      Duration: 1 yr
      Input Date: 12/12/2017
      Firm Name: INCONEN CORPORATION
      Attention: Patrick O'Neil
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Email: patrick@inconen.com
      Website: www.inconen.com

      Components Engineer - Level 3 (3) - FL - C

      Description:
      Chipton-Ross is seeking a Components Engineer - Level 3 (3) for an opening in Orlando, FL.

      RESPONSIBILITIES:
      Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components. Skills: Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM's, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers.

      REQUIRED EXPERIENCE:
      Five years or more of experience in Component Engineering. Must be proficient with computer tools such as MS Excel. Should be comfortable working in a team environment and willing to shadow Senior Components Engineer at the start of the assignment to develop the necessary skills for this position. Also must be able to learn task specific tools such as Q-Star, Partminer and web based obsolescence tools. Must have good communication skills and able to effectively work with manufacturers and other external part suppliers.

      EDUCATION:
      Accredited High School Diploma/GED

      WORK HOURS:
      4/10, Full-Time

      MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
       
      Job Number: 164497
      Job Location: Orlando, FL
      Rate: Up to $45.00 DOE
      Duration: 12 Months
      Input Date: 12/15/2017
      Firm Name: CHIPTON ROSS
      Attention: Terry Jones
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: tjones@chiptonross.com
      Website: www.chiptonross.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Components Engineer - Level 3 with active secret FL

      Description:
      160017
      Requirement #MFC-REQ-1448
      Work Location Orlando, FL
      Work Week 4/10-A
      Needed Date 09/11/2017
      End Date 09/03/2018
      Number of Resources 3
      Security Clearance Active Secret

      Title: Components Engineer - Level 3

      Description
      Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components. Skills: Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers.

      Skill/Experience/Education

      Mandatory:

      Five years or more of experience in Component Engineering. Must be proficient with computer tools such as MS Excel. Should be comfortable working in a team environment and willing to shadow Senior Components Engineer at the start of the assignment to develop the necessary skills for this position. Also must be able to learn task specific tools such as Q-Star, Partminer and web based obsolescence tools. Must have good communication skills and able to effectively work with manufacturers and other external part suppliers.


      Interview Required Yes
      Max Pay Rate 45.00 USD


      OT Allowed Yes (#hours allowed: 10, Pre-Approval Reqd.:Yes)

      Exempt
       
      Job Number: JE-1448
      Job Location: Orlando, FL
      Rate: 45/hr max
      Duration: 12 month contract
      Input Date: 10/03/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Jeana Edrozo
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Website: www.midcom.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Contract - Electrical Harness Installation Engineer-Special Missions

      Description:
      Unique Skills:
      Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required. _________________________________________________________________________________________________________________________ Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned
       
      Job Number: 115282
      Job Location: Savannah, GA
      Per Diem: Possible
      Overtime: Possible
      Start Date: ASAP
      Input Date: 09/07/2017
      Firm Name: INTERGEN GROUP
      Attention: Kim mason
      Address: SUITE 200
      5051 PEACHTREE CORNERS CIR

      City, State: PEACHTREE CORNERS, GA 30092
      Phone: 678/318-1816
      Fax Phone: 678/493-1467
      Website: www.intergengroup.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Controls Engineer

      Description:
      -Seeking Controls Engineer with atleast 10 years experience
      -Allen Bradley PLC programming required.
      -Must have electrical design experience using AutoCAD. AutoCAD Electrical would be a strong plus.
      -Must have production machinery background.
      - Contact steve@blacktreetech.com
       
      Job Location: Roanoke area, VA
      Rate: Negotiable
      Per Diem: YES
      Overtime: Possible
      Duration: 11+ Months
      Start Date: ASAP
      Input Date: 09/13/2017
      Firm Name: BLACKTREE TECHNICAL GROUP
      Attention: Steve Lucey
      Address: 300 TRADECENTER STE 1400
      City, State: WOBURN, MA 01801
      Phone: 781/932-3333
      Website: www.blacktreetech.com

      Crew Station Design

      Description:
      PDS Tech is seeking a Crew Station Design for an open position in Shelton, CT.

      Responsibilities to Include:Develop and design menus, logic and display graphics in a multifunction glass cockpit Pilot Vehicle Interface (PVI) or coordinate design activities of suppliers. Assume responsibility for PVI designs and coordinate with people of various disciplines in an Integrated Product Team environment that requires flexibility and diplomacy. Coordinate evaluation of designs in simulation, take ownership of design approval, and produce configuration-managed specification documents for software requirements developers. Support hot bench, ground, and flight testing of finished product. Secondary duties may include design and development of air vehicle Crew Station Geometry and layout of controls and displays to accommodate full anthropometric range of expected users. Evaluate Crew Station Design and layout in physical and/or electronic mockups, simulations and air vehicles
       
      Required:
      - MS/MA in Human Factors, Experimental Psychology, or related degree
      - (BS Industrial Design, Industrial Engineering or equivalent with Human Factors coursework will be considered)
      - Experience with Part Mission or Full Mission simulation of Pilot Vehicle Interface designs
      - Rapid Prototyping tools such as VAPS® or equivalent
      - Basic Office and database management software (word processing, Power Point, Excel, drawing tools, etc)
      - Excellent communication, writing and presentation skills
       
      Desirable:
      - Experience in military aviation (helicopters in particular).
      - Rational ClearCase, or equivalent configuration management tool.
      - Experience with Human Modeling tools such as Jack® or equivalent.
      - Experience with 3D modeling tools such as CATIA®, ProEngineer® or equivalent
       
       
      Job Number: 1610058626
      Job Location: Shelton, CT
      Per Diem: No
      Duration: 24 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Ryan Bushey
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Fkh2AAC&URLSource=cjhunter

      Design Checker

      Description:
      1. Review 3D engineering data for conformance to requirements as directed.
      2. Check parts for fit, form and function to the extent that information is available.
      3. Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to requirements as directed.

      Checkers are responsible for determining the acceptability of data in the following areas:
      1. Accuracy and completeness of engineering product definition data, including CAD and PDM data.
      2. Proper application and compliance with all Engineering and customer drawing requirements.
      3. Use and understanding of GD & T a must.
      4. Dimensioning and tolerancing including familiarity with ASME Y14.5.
      5. Application of best drafting and design practices and procedures.
      6. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
      7. Advise Design personnel regarding company drawing and design practices and procedures.
      8. Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
      9. Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
      10. Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
      11. Knowledge of company parts list & PdocM, a plus.
      12. Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

      Essential Duties and Responsibilities
      1. Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
      2. Ensures designs meet customer criteria, quality standards and FAA requirements.
      3. Adheres to budget and project schedules.
      4. Provides design guidance and feedback to other engineering personnel.
      5. Other duties as assigned.
      6. Knowledge of industry design and documentation standards.
      7. Experience with mechanical assemblies and manufacturing technique design.
      8. Ability to work independently and cross-functionally.
      9. Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills.
      10. Knowledge of Excel, Share Point software, Microsoft Office a plus

      Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
       
      Job Number: 24-191
      Job Location: Savannah, GA
      Rate: $50.00 - $55.00
      Per Diem: Yes
      Overtime: Yes
      Duration: 1 Year plus
      Start Date: ASAP
      Input Date: 12/12/2017
      Firm Name: PRECISION PERSONNEL INC
      Attention: Matt
      Address: 600 CLEVELAND ST STE 700
      City, State: CLEARWATER, FL 33755
      Phone: 727/449-0600
      800 Phone: 877/600-2333
      Fax Phone: 727/449-0627
      Email: matt@precisionpersonnel.com
      Website: www.precisionpersonnel.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Design Engineer

      Description:
      Design Engineer
      East Aurora, NY
      12+ month contract

      This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components and systems. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.


      NATURE AND SCOPE:

      The Design Engineer typically reports to an Engineering Manager, Section Head or Group Leader within the department and on demanding projects he/she might work under the leadership of a Senior Design Engineer. The incumbent receives instructions on specific assignment objectives, complex features, and possible solutions. He/She is expected to make independent and unreviewed decisions on routine technical matters.

      The Design Engineer is a key contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. The Design Engineer generally will operate as part of a design/development team, which includes other Department engineers with his/her primary concern being component design.

      Successful mechanical designs require judicious material selection, effective use of stress analysis, and sometimes design of unique kinematic mechanisms. Successful electrical designs require intelligent component selection and effective use of thermal stress analysis. Circuit designs must be reliable and make optimal use of available space.

      Required:

      MS Degree preferred in Mechanical, Aeronautical, or Electrical Engineering plus 3 years of design experience

      Alternatively, BS Degree plus 6 years of design experience

      Self-starting instincts

      Strong analytical skills

      3D spatial orientation

      Mechanical hardware design.

      Circuit design and a wide range of electrical components.

      Basic knowledge of closed loop control systems

      Good communication skills
       
      Job Number: 52252
      Job Location: East Aurora, NY
      Rate: DOE
      Per Diem: Possible
      Overtime: Possible
      Duration: 12 months
      Start Date: 9/5/17
      Input Date: 09/21/2017
      Firm Name: BUTLER AEROSPACE & DEFENSE
      Attention: Laura Leszek
      Address: SHELTON POINTE STE 204
      2 TRAP FALLS ROAD

      City, State: SHELTON, CT 06484
      Phone: 203/926-2705
      Fax Phone: 203/926-0082
      Website: www.butler.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Design Engineer - Electrical

      Description:
      ESSENTIAL DUTIES AND RESPONSIBILITIES:
      • Research aircraft systems and components as necessary to perform assignments.
      • Design and develop engineering solutions in support of innovative concepts, and the replication and modification of existing electrical and electromechanical designs.
      • Develop, analyze, and substantiate low to high complex repair solutions for mitigating all kinds of electrical issues.
      • Provide design and repair engineering assistance in support of mechanical and composite projects when assigned.
      • Create technical documents for certification, maintenance and operation of various types of projects.
      • Produce structural, technical and sometimes market analysis for which FAA approval can be obtained to ensure compliance with all appropriate regulatory, customer, OEM, production and management requirements.
      • Create various types of engineering drawings using common CAD software such as AutoCAD and SolidWorks.
      • Perform mechanical and electrical assembly when assigned.
      • Ensure all applicable customer, OEM, FAA, and maintenance requirements are met.
      • Approve engineering documents within authorized signatory level.
      • Train and assist other engineers in performance of their assigned tasks.
      • Participate in the development of work statements and hour estimates in support of project proposals.
      • Represent company on engineering technical matters with OEM’s, customers, operators and regulatory authorities.
      • Interact in a professional manner with members of internal and external organizations.
      • Independently evaluate, select, and adapt to situations. Modify techniques, procedures and criteria to solve problems encountered.
      • Monitor and approve engineering use of Customer, OEM, and other technical data to ensure compliance with all appropriate regulations and requirements.
      • Ensure projects are accomplished within a reasonable time frame as defined by a Project Lead or Engineering Management.
       
      Job Location: Everett, WA
      Input Date: 09/07/2017
      Firm Name: APA SERVICES
      Attention: Kami M Muehlberger
      Address: 4150 INTERNATIONAL PLZ STE 510
      City, State: FORT WORTH, TX 76109
      800 Phone: 888/272-7868
      Fax Phone: 800/285-8805
      Website: www.apaservices.net

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Design Engineer / development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components NY

      Description:
      Request number: 4916
      Date created: 08/28/2017
      Job title: Design Engineer
      Number of openings: 2

      Position location: East Aurora - NY
      Employment type: Contract
      OT exempt: No

      Shift: 1st
      Education Requirement: MS/MA
      Driving on company time?: No

      Maximum Hourly Pay Rate: 50
      Start Date: 09/05/2017
      Tentative End Date: 08/31/2018

      Job Description
      Function: GENERAL FUNCTION:

      This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components and systems that will become the new products of Moog, Inc. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.

      DIMENSIONS:

      Expected annual production sales from projects: $4M to $10M

      NATURE AND SCOPE:

      A variety of technical functions exist within the Design/Development Engineering Department. Reporting to the division's Chief Engineer typically are Associate Engineers, Development Engineers, Design and Project Engineers, Senior Design and Senior Project Engineers, Senior Staff Engineers, and Principal Engineers, as well as Engineering Managers, Section Heads or Group Leaders. The Design Engineer typically reports to an Engineering Manager, Section Head or Group Leader within the department and on demanding projects he/she might work under the leadership of a Senior Design Engineer. The incumbent receives instructions on specific assignment objectives, complex features, and possible solutions. He/She is expected to make independent and unreviewed decisions on routine technical matters. However, assistance is furnished on unusual problems and work is periodically reviewed for application of sound professional judgment.

      The Design Engineer is a key contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. The products of Moog generally are unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The Design Engineer generally will operate as part of a design/development team, which includes other Department engineers with his/her primary concern being component design. The incumbent must effectively coordinate the work of drafters, technicians, and others who assist in specific assignments.

      In the early stages of a new program, the project team will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations. Under the technical direction of the Engineering Manager, Section Head or the team's lead engineer, the Design Engineer will then guide the evolution of the conceptual design, technical project planning, detail design, and development testing. This requires some travel and the participation in presentations to customers.

      The Design Engineer will apply creative skills to generate designs that fulfill the conflicting requirements of meeting performance goals, robustness over extreme conditions, minimum weight, awkward envelopes, and cost effectiveness. Successful mechanical designs require judicious material selection, effective use of stress analysis, and sometimes design of unique kinematic mechanisms. Successful electrical designs require intelligent component selection and effective use of thermal stress analysis. Circuit designs must be reliable and make optimal use of available space.

      To be considered for the position of Design Engineer, a candidate should have a minimum of an MS Degree, preferably in Mechanical, Aeronautical or Electrical Engineering plus three years of design/development engineering experience. As an alternative, the candidate would have a BS Degree plus six years minimum of design/development engineering experience. To fulfill the demands of design and development of new products the individual must have self starting instincts and strong analytical skills. A Mechanical Design Engineer should have a good sense of three dimensional spatial orientation and seasoned knowledge of mechanical hardware design. An Electrical Design Engineer should have solid knowledge of circuit design and a wide range of electrical components.

      Basic knowledge of closed loop control systems and good communication skills is also necessary.

      ACCOUNTABILITIES:

      1. Contribute to the development of new product requirements through consulting with customers and sales personnel.

      2. Validate conceptual problem solutions by performing trade studies and analyses.

      3. Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.

      4. Operate as a key element in a team of creative, independent individuals.

      5. Represent Moog in a manner consistent with its technical reputation.

      6. Create reliable designs through a comprehensive experimental development test program.

      7. Document designs, analyses, and test results with accurate and concise repo
      Essential job functions: manufacturing and procurement as well as mechanical assembly and testing will be required.

      Request status: Open
       
      Job Number: JE-4916
      Job Location: East Aurora, NY
      Rate: 50/hr max
      Duration: 12 month contract
      Input Date: 09/28/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Jeana Edrozo
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Website: www.midcom.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Design Support and Training - Instructor - Tech Spec II

      Description:
      UNIQUE SKILLS
      CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.

      EDUCATION AND EXPERIENCE REQUIREMENTS
      Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

      POSITION PURPOSE
      Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

      PRINCIPAL DUTIES AND RESPONSIBILITIES
      ESSENTIAL FUNCTIONS
      1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
      2. Is consulted extensively by associates and others as a recognized authority within the field
      3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
      4. Approach to problem solving balances technical product, cost and schedule
      5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
      6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

      ADDITIONAL FUNCTIONS
      1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
      2. Performs other duties as assigned

      OTHER REQUIREMENTS
      1. Advanced degree in engineering, or related curriculum preferred
      2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
       
      Job Number: 17-758-82041
      Job Location: Southeast
      Rate: $60.00 to $62.00/per hour
      Per Diem: Split
      Overtime: Possible
      Duration: 6 mths +
      Start Date: ASAP
      Input Date: 11/30/2017
      Firm Name: AGENTE TECHNICAL
      Attention: Alexa Bui
      Address: 714 CENTERPARK DR STE 140
      City, State: COLLEYVILLE, TX 76034-2852
      Phone: 972/415-4545
      800 Phone: 866/758-2494
      Fax Phone: 866/717-5927
      Website: www.agentetech.com

      Design Support and Training Instructor

      Description:
      Design Support and Training - Instructor - Tech Spec II
      Savannah, GA
      Rate:$60-$62

      Unique Skills:

      CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.


      Education and Experience Requirements:

      Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

      Position Purpose:

      Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

      Principal Duties and Responsibilities:

      Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

      Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

      Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
       
      Job Number: 6620
      Job Location: Savannah, GA
      Rate: $60-$62
      Per Diem: Yes
      Overtime: Possible
      Duration: LT
      Start Date: ASAP
      Input Date: 12/12/2017
      Firm Name: INCONEN CORPORATION
      Attention: Brad
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Email: brad@inconen.com
      Website: www.inconen.com

      Designer/Drafter 3

      Description:
      PDS Tech, Inc. is seeking a Designer/Drafter for an open position in NSacaramento, CA.
      In your role you will:

      • Completes complex drawings to suit engineering changes and initiates engineering changes.
      • Completes the creation of complex design layout and detail drawings of complex products.
      • Performs compilation of materials and specification sheets.
      • Performs dimensions/specification determination necessary on complex drawings for effective manufacturing.
      • Performs the designs of cost-effective complex products with adherence to applicable industry and customer standards/specifications.
      • Completes complex investigations related to product design and maintenance.
      • Performs review of complex engineering drawings and supporting documents for adherence to drafting standards.
      • Completes planning test programs.
      • Selects material based on application; may coordinate procurement. 


       
      Skills and requirements: 
      • PTC CREO Elements/Pro 5.0 
      • Pro Sheetmetal, Piping, Cabling, Surfacing 
      • Autocad 2010 
      • Experience designing sheet metal parts, structural weldments, Electro-Mechanical packaging, large and small welded and/or bolted assemblies, fiberglass and plastic parts 
      • Experience with corrosion protection (ie. Paint, Powder Coat, anodizing, zinc plating) 
      • Experience creating bill of materials, Engineering change procedure, technical writing skills, and creating work instructions 
      • Experience working in a manufacturing environment, interfacing with factory workers, purchasing, communication with suppliers and customers, and interdepartmental interaction 


      Education and Work Experience

      • Bachelor's degree in related field with 2 years experience 
      • Associate Degree in related field with 3 years experience 
      • High School Diploma with 5 years experience 


       
       
      Job Number: 1610055971
      Job Location: Sacramento, CA
      Per Diem: No
      Duration: 6 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Lea Salmo
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FXkOAAW&URLSource=cjhunter

      Designer/Drafter 4

      Description:
      PDS Tech is seeking a candidate for the Designer/Drafter 4 position located in Sacramento, CA.

      Requirements: 
      •Prepare schematics using Elcad. Elcad experience is preferred but not mandatory. Electrical circuit design experience and willingness to use Elcad is essential. 
      • Prepare and review electrical design to US and European standards (IEEE, NFPA, DIN etc..) 
      •Prepare, review and submit technical specifications and proposals 
      •Prepare, review and submit light rails, locomotives and coaches electrical concept of low voltage and high voltage 
      •Provide support to customers, vendors, chain management and engineering management 
      •Create, update and manage redlines of Engineering/Manufacturing BOM 
      •Create and release engineering documents (redlines and BOM) via PDMLink, SAP and JDEdwards 
      •Experience working in a manufacturing environment, interfacing with factory workers, purchasing, communication with suppliers and customers, and interdepartmental interaction 
       
      Skills: 
      • The ability to interpret customer specification and design electrical schematics in consistency with US (or defined) standards is a must 
      • Interfacing and interpreting system engineering documents is a key part of the design process 
      • The ability to perform complex and technically demanding work within technical or paraprofessional area will be required 
      •Preempts potential problems and provides effective solutions in reaction to application of concepts, techniques, knowledge, or processes. 
      •Independently seeks complex solutions and unusual problems before contacting others 
      •The role may require providing expert advice, training, and technical assistance to support staff and train lower level employees. 

      Education and Work Experience: 
      •Bachelor's degree in related field with 2 years’ experience 
      •Associate Degree in related field with 3 years’ experience 
      •High School Diploma with 5 years’ experience
       
      Job Number: 1710066630
      Job Location: Sacramento, CA
      Duration: 6 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Janelie Pizzetulla
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000021jwuAAA&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Die Engineering Leads - Auburn Hills, MI

      Description:
      STS AeroStaff Services is hiring Die Engineering Leads for open positions in Auburn Hills, Michigan.

      Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

      Job Duties:

      • Conduct Stamping Simulation, Sheet metal Die Development, Die Compensation, Die Manufacturing, Die trial and Virtual Die Tryout in conjunction with Project Management and Customer Engineering teams
      • Perform binder development and draw simulations to ensure safe panels per customer requirements and standards within program timing constraints
      • Analyze spring back, surface abnormalities and other non-conformance and recommend compensation or other countermeasures
      • Develop trim lines, die faces and break lines per customer standards and product requirements
      • Understand GD&T and tolerance stack ups, make recommendations for to ensure feasible product can be released within program timing constraints
      • Perform scrap shed analysis and enact countermeasures for non-conformance areas
      • Provide feedback to die build source for optimal die processes and die designs
      • Interact with customer Product teams and Project Management to ensure feasibility of all details within timing requirements
      • Support of cost reduction/value engineering initiatives
      • Use of software, including but not limited to Autoform, Dynaform, Omnicad, CATIA V5 R19, UG NX, and LS Dyna 5.7

      Qualifications:

      • B.S. in Materials Science, Mechanical Engineering, Industrial Systems Engineering, or relevant area of study Graduate degree is preferred
      • 2 – 5 years of experience with Autoform, Dynaform, Omnicad, CATIA V5 R19, UG NX, and LS Dyna 5.7
      • Understanding of modeling concepts that correlates with actual die construction
      • Must be able to collaborate and work in a team environment with a high level of interpersonal skills
      • Must be able to create technical reports and have excellent presentation skills
      • Must have a basic understanding of sheet metal forming principals
      • Keep up to date with latest die processes and tooling trends to maintain industry leading skills
      • Extensive understanding of sheet metal forming principals, materials commonly used in today’s applications and be able to recommend material alternatives based on application and product geometry
      • High level of analytical ability where problem solving is a must
      • Excellent written and verbal communication and presentation skills

      Benefits:

      STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

      We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

      Thanks for taking the time, and we look forward to hearing from you soon.
       
      Job Number: 40026
      Job Location: Auburn Hills, MI
      Rate: DOE
      Per Diem: No
      Overtime: Possible
      Duration: Temp
      Start Date: ASAP
      Input Date: 09/07/2017
      Firm Name: STS AEROSTAFF SERVICES
      Attention: STS AeroStaff Services
      Address: 2000 NE JENSEN BEACH BLVD
      City, State: JENSEN BEACH, FL 34957
      800 Phone: 877/707-5767
      Fax Phone: 877/707-5767
      Website: www.stsaviationgroup.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Diesel Technician - Vehicle Product Validation and Testing

      Description:
      Job Title: Diesel Technician - Vehicle Product Validation and Testing
      Location: Portland, OR 97217
      Duration: 1 2 Months
      Job Details
      • This is a great vehicle diesel technician position that gets you involved in validating of new prototype test vehicles for a major truck manufacture located in Portland, Oregon.
      • Diesel Technicians will work in the vehicles validation and testing department of new up and coming vehicles that are not yet released to be sold. The Validation group responsibilities is to install one off or several prototype mechanical or electrical components for testing and product improvements purposes. You’ll also be doing engine diagnostics of electrical and mechanical components and repairing or replace any component failures on engine, transmission, suspensions, exhaust and other areas of the vehicle when products fail.
      • As a validation diesel technician, you’ll be writing up engineering reports of the vehicle component failures in detail for the engineering validation team to review. You’ll work closely with the mechanical and electrical engineers that are responsible for the components. Verify and go over and validate any component failures or improvements with team members.
      • You’ll also keep current fleet maintained and running well by doing normal scheduled maintenance work such as oil and air filter changes, brake replacements, tire rotations and other normal scheduled maintenance during the validation and testing period of the test fleet.

      Education:
      • Diesel Technician Technical School (or) Associates Degree in Diesel Technician

      Requirements:
      • Must have 2+ years of diesel technician experience
      • Must have your own tools
      • Be a quick leaner
      • Have good communication skills
      • Work well with others.
       
      Job Number: 3410
      Job Location: Portland, ORE
      Rate: DOE
      Per Diem: Possible
      Overtime: Possible
      Duration: 12 Months
      Start Date: ASAP
      Input Date: 09/05/2017
      Firm Name: OLSA RESOURCES INC
      Attention: Sarabjit Saxena
      Address: 3836 N BALLAST ST
      City, State: PORTLAND, OR 97217
      Phone: 503/608-7895
      Fax Phone: 503/608-7896
      Website: www.olsaresources.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Digital Design Engineer

      Description:
      The client is an established pioneer in space exploration and military/defense technology. A leader in high technology and engineering services, the client is world renowned for its expertise in the areas of infrared detection and space & missile electronics. As a first-rank engineering and production company, the client is engaged in the design, development, and manufacture of highly-sophisticated electronics equipment that is used in a variety of product areas for government, civil and commercial applications.

      Electrical Engineer to support new product development within the Space Products development team. In this role, you will have the opportunity to be part of a team that designs and implements spacecraft and launch vehicle communication and avionics equipment.

      Responsibilities include digital systems design using VHDL to develop and implement digital wireless receivers, transmitters, transponders, and launch vehicle avionics equipment. Candidates with experience developing algorithms for digital signal processing, forward error correction coding and decoding, encryption/decryption, waveforms and data protocols in FPGAs are desired. System modeling and simulation capabilities utilizing MatLab/ Simulink and ModelSim/Questa tools are preferred.

      The position involves working in teams to generate technical proposals, present at design reviews, perform requirements development, system architecture development, system partitioning, assessing system performance using analysis, simulation, and laboratory testing

      This position requires a BSEE, BSEET, or BSECE degree. We are seeking a candidate with 3 years of demonstrated experience in the specification, design, implementation, simulation, test, verification, validation, and debugging of digital communication systems, avionics systems, and/or control systems. Experience with Actel FPGAs is a plus.
       
      Job Number: 17-779-9286
      Job Location: Midwest
      Rate: $70.00 to $90.00/per hour
      Per Diem: No
      Overtime: Possible
      Duration: 6 mths +
      Start Date: ASAP
      Input Date: 10/17/2017
      Firm Name: AGENTE TECHNICAL
      Attention: Alexa Bui
      Address: 714 CENTERPARK DR STE 140
      City, State: COLLEYVILLE, TX 76034-2852
      Phone: 972/415-4545
      800 Phone: 866/758-2494
      Fax Phone: 866/717-5927
      Website: www.agentetech.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Drafter 4 / Catia V5 V6 Teamcenter CA

      Description:
      160178/1609
      Drafter 4 (Job Number: 17018411)

      Number of Openings: 2

      Location(s): United States-California-San Diego


      Shift: 1st Shift

      Target Start Date: Oct 2, 2017

      Title: Drafter 4

      Rate: $30 - $40/hour

      Location: San Diego, CA

      Positions: 2 Total

      Duration: 6 Months

      Shift: 1st Shift - 9/80

      Position Summary / Responsibilities
      Plans, lays outs, draws, and revises detailed part, assembly, and installation engineering drawings from basic layouts, established references, and standard data in a field of specialization such as structures, devices, mechanics, electrical, or electronics. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA. Completes details of major layout drawings prepared by others in accordance with standard engineering drafting practices. Determines scaling; inserts necessary reference planes, centering and dimension lines, hidden line interpolations, and sectioning; prepares specifications for parts, assemblies, and installations; prepares complete production detail drawings; contributes design modifications to improve quality of product or facilitate manufacturing operations.


      Basic Qualifications:

      •Experience with Drawing Releases
      •Experience with Product Lifecycle Management
      •TeamCenter
      •AA or other 2 year technical degree in related discipline and 6 years related experience.

      Preferred Qualifications:

      •CATIA V5/6
      •Experience with NG Products (Triton)
      •Experience with Commercial Electronics
      •19 in. standard rack mounting and computer specification experience
       
      Job Number: MB-17018411
      Job Location: San Diego, CA
      Rate: 30-40 DOE
      Duration: 6 month contract
      Input Date: 09/28/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Jeana Edrozo
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Website: www.midcom.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Drafter – CAD/Manufacturing Engineering

      Description:
      Seeking a Drafter – CAD/Manufacturing Engineering for an opening in Anaheim, CA.

      RESPONSIBILITIES:
      1. Create 2D Autodesk Inventor views for assembly using the 3D Autodesk Inventor model.
      2. Draft 2D Drawings in Inventor and apply GD&T.
      3. Develop assembly instructions in Excel and Paint using the 2D Inventor views.
      4. Generate Engineering drawings, schematics, wire lists and Bill of Materials of electro-mechanical assemblies.
      5. Generate Engineering Change Requests (ECR) in Agile system.
      6. Create routers and Kit by Operation in Make-To-Order system (MTO).
      -To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

      REQUIRED EXPERIENCE:
      1. Knowledge of Mil-Specifications.
      2. Familiar with military and commercial standards pertaining to hardware, material and processes.
      3. Capable of handling multiple projects simultaneously.
      4. Knowledge of machine shop practices.
      5. Practical Drafting experience required.

      -Must have one-year experience in AutoCAD and Autodesk Inventor.
      -Must have one-year experience in 2D drafting using GD&T.
      -Must have one-year experience in using Excel and Paint.

      MATHEMATICAL SKILLS
      Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

      WORK ENVIRONMENT
      The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

      The noise level in the work environment is usually moderate.

      EDUCATION:
      Accredited High School Diploma/GED

      WORK HOURS:
      9/80, Full-Time
       
      Job Number: 165116
      Job Location: Anaheim, CA
      Rate: $33.00
      Duration: 6 Months
      Start Date: ASAP
      Input Date: 09/06/2017
      Firm Name: CHIPTON ROSS
      Attention: Debbie Aubert
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Website: www.chiptonross.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      ECS Flammability

      Description:
      Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

      The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

      We are looking for an ECS Engineer with a focus on Flammability

      Responsibilities:

      Coordinate system test and certification requirements.
      Author flight test and ground test specifications.
      Support flight test and ground test activities.
      Analyze test data and evaluate system operation.
      Verifying Comportment ventilation and drain from the view point of fire marshal
      Engine and APU Compartment Ventilation/Fire extinguisher from the viewpoint of fire marshal
      Prepare test reports.
      Domestic and occasional international travel is required.
      Requirements:

      Flammable Fluid Test, Report, Document, Design for company and certification
      Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
      Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
      Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint.
      Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
      If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

      Candidates must have legal authorization to work in the United States, Canada or Mexico
       
      Job Location: Seattle, WA
      Per Diem: Possible
      Overtime: Possible
      Start Date: ASAP
      Input Date: 10/06/2017
      Firm Name: VELOCITY CONSULTING SOLUTIONS
      Attention: Miguel Calderon
      Address: 20306 15TH AVE NE STE A
      City, State: SHORELINE, WA 98155
      Phone: 206/812-1061
      Website: www.velocity-cs.com

      EE Technician

      Description:
      PDS Tech, Inc is seeking a candidate for the EE Technician for a 12 month contract position located in Santa Clara Valley, CA.  

      Looking for driven technicians to support the Hardware and Firmware design teams with familiarity with Sensor / Camera / Radar / Lidar / RF. 

      If you are interested, please email Jill Maasberg your resume to jmaasberg@pdstech.com

      We are looking for 5 EE Technicians, one each with the following strengths
      1. Need someone with good electronic skills, able to solder, able to work with little instruction, can build test fixtures, experience in wire harnesses.
      2. Need someone with RF background, self motivated, able to work with little instructions.
      3. Need a candidate with some background in SW, good electronic skills, able to solder, able to work with little instruction, can build test fixtures, experience in wire harnesses. Python script, Linux SW
      4. Need a candidate with a Sensor / camera background. Hands on work. some background in electronics is a plus, able to work with little instruction.
      5. Need a floating tech, SW, good electronic skills, able to solder, able to work with little instruction, can build test fixtures, experience in wire harnesses. Python script, Linux SW
      ​Key Qualifications:
      - Tech Diploma in Electrical Engineering
      - Hands-on experience with electronic product assembly.
      - Hands on experience in prototype work and functional verification specifically with electronics.
      - Hands on and fluent with lab equipment: digital multimeter, spectrum analyzer, signal generator, oscilloscope, power supply, data loggeretc.
      - Must have superb soldering & rework skills (0402, QFNs, BGAs, CSPsetc)
      - Strong documentation and communication skills- strong technical writing.
      - Great computer skills: Mac & PC
      - Able to manage multiple tasks at once
      - Needs to be able to work independently but able to take direction from multiple sources (Lab Manager and Lab Engineers).
      -Sensor / Camera / Radar / Lidar / RF. 

      Valuable Prior Experience:
      - Developing automated test and measurement systems
      - System of environments optimized for high speeded measurements
      - Schematic capture for boards or flexes
      - Optical experience
       
      Job Number: 1710072884
      Job Location: Santa Clara, CA
      Duration: 12 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Jill Maasberg
      Address: 12708 RIATA VISTA CIR STE A-108
      City, State: AUSTIN, TX 78727
      Phone: 512/343-0303
      800 Phone: 800/917-2841
      Email: cecjaustin@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000023EUrAAM&URLSource=cjhunter

      EHI Engineers

      Description:
      Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, system, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
       
      Job Location: Savannah, GA
      Input Date: 07/07/2014
      Firm Name: INCONEN CORPORATION
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Email: cathy@inconen.com
      Website: www.inconen.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      EMI/EMC Test Engineer

      Description:
      Responsibilities:
      Plans, prioritizes and organizes available resources to meet Group and Company objectives and schedules.
      Responsible for the setup and conduct of assigned test projects.
      Provides supervision to test technicians and support engineers in the setup and conduct of tests.
      Ensures test technician(s)/support engineer(s) understand test requirements and method of conducting test.
      Provides support to test technician(s)/support engineer(s) in the setup and conduct of test projects.
      Sets leadership example in the conduct and documentation of test projects.
      Assesses capital equipment needs of Group and provides recommendations to Management.
      Supports the training and development of laboratory personnel
      Responsible for the quality of work performed by the Group.
      Reviews test data to ensure accuracy prior to moving to next task
      Alerts client and test engineer/manager of any out-of-tolerances or other anomalies and documents appropriately (notice-of-anomaly or test discrepancy report)
      Prepares 'Basis of Estimates” and 'Cost Estimates” in support of proposals.
      Represents the Group and Company in a professional and disciplined manner
      Adheres to plans and schedules (discusses with supervision any proposed deviations prior to action being taken)
      Does not make commitments to clients or prospective clients without first obtaining approval of laboratory manager.
      Plans ahead with client to facilitate test project.
      Provides positive leadership to co-workers
      Responsible for the generation of test plans and procedures.
      Responsible for the accuracy of the technical content of docum
      ents generated.
      Interfaces directly with client to ensure accuracy and completeness of document.
      Provide leadership towards maintaining ISO/IEC 17025 laboratory accreditation compliance
      Pursue continuous improvement initiatives in accordance with requirements for accreditation compliance
      Support on-site assessments by accrediting body auditors
      Conduct laboratory quality audits

      Qualifications:
      BS Electrical Engineering

      Knowledge Desired:
      MIL-STD-461 Test Specifications
      RTCA/DO-160 Test Specifications
      Desired 4 years or more experience in laboratory environment with direct knowledge of EMI/EMC testing
       
      Job Number: 17-39415
      Job Location: Mason, OH
      Rate: 50.00
      Per Diem: SPLIT
      Overtime: YES
      Duration: 1 YEAR
      Start Date: ASAP
      Input Date: 09/07/2017
      Firm Name: NESCO RESOURCE
      Attention: Paul Chacon
      Address: 153 PARLIAMENT LOOP STE 1001
      City, State: LAKE MARY, FL 32746
      Phone: 407/710-8000
      Fax Phone: 407/710-8001
      Website: www.nescoresource.com

      Electric System Component Outfitting Interface Engineer

      Description:
      This position is located in Nagoya, Japan.

      Electric system component outfitting interface engineer
      • Mechanical/ structural interface engineering expertise
      • Willing to be a leading engineer rather than just a manager or an advisor

      • 10+ years experience 
      • Bachelors Degree in Engineering
      • International experience desirable. 
      • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

       
      Job Number: 1610044922
      Job Location: Nagoya,
      Duration: 36 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Ryan Bushey
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i5000000037FjAAI&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Applications Engineer

      Description:
      Electrical Applications Engineer

      Location: Savannah, GA
      Pay Rate: $58/hr - $63/hr
      Duration: Long Term Contract
      Shift: First
      *Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project*

      Unique Skills:
      -Experience with Autocad required; Aerospace experience required.
      -Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required.
      -Be Familiar with CFR 14 Part 25 and AS50881.
      -Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts.
      -Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.

      Job Description:
      -Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
      -5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

      Position Purpose:
      -Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

      Principal Duties and Responsibilities/Essential Functions:
      1. Contributes to planning, developing and coordinating of important engineering projects
      2. Provides specialized technical assistance to team members
      3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
      4. Determines and develops own approach to solutions within schedule and cost objectives
      5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
      6. Acts as liaison with representatives outside of the assigned group/area

      Additional Functions:
      1. Actively works to improve daily processes and ensures all work meets customer requirements
      2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
      3. Performs other duties as assigned

      Other Requirements:
      1. Advanced degree in engineering related field preferred
      2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
       
      Job Number: 7059
      Job Location: Savannah, GA
      Rate: 58.00-63.00
      Per Diem: Yes
      Overtime: Possible
      Duration: LT
      Input Date: 10/06/2017
      Firm Name: INCONEN CORPORATION
      Attention: Cathy O'Neil
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Website: www.inconen.com

      Electrical Applications Engineer

      Description:
      Hiring in multiple locations

      Email your resume or apply online

      Benefits Available
      - long term contracts
      - top per diem rates
      - direct deposit
      - referral bonuses
      - 401(k) program
       
      Input Date: 05/09/2017
      Firm Name: NESC STAFFING
      Address: 150 MIRONA RD
      City, State: PORTSMOUTH, NH 03801
      800 Phone: 800/562-3463
      Email: lokeefe@nesc.com
      Website: www.nesc.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Applications Engineer

      Description:
      Develop Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components, such as: connectors, backshells and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

      Experience/Education Required
      BSME/BSEE or equivalent experience.

      Unique Skills
      Experience with AutoCAD is required.
       
      Job Number: 24-161
      Job Location: Savannah, GA
      Rate: $58-$63
      Per Diem: YES
      Overtime: YES
      Duration: 1 YR +
      Start Date: ASAP
      Input Date: 10/30/2017
      Firm Name: PRECISION PERSONNEL INC
      Attention: Matt
      Address: 600 CLEVELAND ST STE 700
      City, State: CLEARWATER, FL 33755
      Phone: 727/449-0600
      800 Phone: 877/600-2333
      Fax Phone: 727/449-0627
      Website: www.precisionpersonnel.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Applications Engineering

      Description:
      UNIQUE SKILLS
      Experience with Autocad required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

      JOB DESCRIPTION
      Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

      PRINCIPAL DUTIES AND RESPONSIBILITIES
      ESSENTIAL FUNCTIONS
      1. Contributes to planning, developing and coordinating of important engineering projects
      2. Provides specialized technical assistance to team members
      3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
      5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
      6. Acts as liaison with representatives outside of the assigned group/area

      ADDITIONAL FUNCTIONS
      1. Actively works to improve daily processes and ensures all work meets customer requirements
      2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
      3. Performs other duties as assigned

      OTHER REQUIREMENTS
      1. Advanced degree in engineering related field preferred
      2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
       
      Job Number: 17-736-93664
      Job Location: Southeast
      Rate: $58.00 to $63.00/per hour
      Per Diem: Split
      Overtime: Possible
      Duration: 6 mths +
      Start Date: ASAP
      Input Date: 11/30/2017
      Firm Name: AGENTE TECHNICAL
      Attention: Alexa Bui
      Address: 714 CENTERPARK DR STE 140
      City, State: COLLEYVILLE, TX 76034-2852
      Phone: 972/415-4545
      800 Phone: 866/758-2494
      Fax Phone: 866/717-5927
      Website: www.agentetech.com

      Electrical Applications Engineering Consultant

      Description:
      PDS Tech is seeking an Electrical Applications Engineer for an open position in Savannah, GA.
      In your role, you will:

       

      Unique Skills:



      • Experience with Mentor Graphics L-Cable required. Aerospace experience required.
      • Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881.
      • Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts.
      • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.



      Principal Duties and Responsibilities: Essential Functions:

      • Contributes to planning, developing and coordinating of important engineering projects
      • Provides specialized technical assistance to team members
      • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
      • Determines and develops own approach to solutions within schedule and cost objectives
      • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
      • Acts as liaison with representatives outside of the assigned group/area


      Additional Functions:

      • Actively works to improve daily processes and ensures all work meets customer requirements
      • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
      • Performs other duties as assigned Other

      As our ideal candidate, you will meet the following requirements:
      • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. 

      Education/Experience:

      • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
      • 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical

       
      Job Number: 1610052916
      Job Location: Savannah, GA
      Per Diem: No
      Duration: 6 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Clyde Callwood
      Address: 3922 COCONUT PALM DR STE 100
      City, State: TAMPA, FL 33601
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000001tKymAAE&URLSource=cjhunter

      Electrical Applications Engineering Contractor

      Description:
      PDS Tech is seeking an Electrical Applications Engineer for an open position in Savannah, GA.
      In your role, you will:

       

      Unique Skills:



      Experience with Autocad required.

      Aerospace experience required.

      Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.



      Position Purpose:
      Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

      Principal Duties and Responsibilities:

      Essential Functions:

      1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

      Additional Functions:
      1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned


      As our ideal candidate, you will meet the following requirements:
      • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. 

      Education/Experience:

      • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
      • 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical

      POC: Clyde (813) 426-9917 or ccallwood@pdstech.com

      PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.
       
      Job Number: 1710063879
      Job Location: Savannah, GA
      Per Diem: No
      Duration: 6 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Clyde Callwood
      Address: 3922 COCONUT PALM DR STE 100
      City, State: TAMPA, FL 33601
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKHeAAO&URLSource=cjhunter

      Electrical Applications Engineers

      Description:
      Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. Mentor L-Cable
       
      Job Location: Savannah, GA
      Input Date: 07/07/2014
      Firm Name: INCONEN CORPORATION
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Email: cathy@inconen.com
      Website: www.inconen.com

      Electrical CAD Designer/Drafter

      Description:
      Overview:
      • Develop system designs and create construction documents for electrical projects using AutoCAD/AutoCAD Electrical.
      • MicroStation would be a plus
      • Work may include single line diagrams, schematics, interconnect diagrams, panel layouts, bill of materials, conduit and cable tray layouts/schedules/fill calculations, and cable and wire interconnection reports.
      • Create drawings for electrical enclosures, equipment, instruments, and installations details.    
      • Complete electrical drawings package under direction from electrical engineering group.

      • Must have strong knowledge and skill with AutoCAD Electrical software.
      • Minimum 3 years AutoCAD drafting experience.
      • MicroStation would be a plus
      • Clear understanding of electrical engineering terminology, codes, and drafting techniques.
      • Familiar with construction processes.
      • Associates Degree in engineering drafting/design or related field.
      • Ability to analyze problems and develop solutions.
      • Ability to clearly communicate technical/non-technical aspects of engineering and construction projects.

       
      Job Number: 1710064163
      Job Location: Green Bay, WI
      Duration: 6 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Sue Van Pay
      Address: 110 PACKERLAND DR STE A
      City, State: GREEN BAY, WI 54303
      Phone: 920/499-9943
      800 Phone: 800/333-1389
      Fax Phone: 920/499-9067
      Email: cecjgreenbay@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GLU5AAO&URLSource=cjhunter

      Electrical Engineer (Washington)

      Description:
      Electrical Engineer

      Location: Everett, Washington
      Duration: 6 months
      Rate: up to $55/hr


      Primary Responsibilities
      Summary
      This position is responsible for leading assigned designs in the engineering department utilizing established modeling and design standards.  The Design Engineer will support design and development of engineering packages based on customer and OEM requirements for production, retrofit applications and product development.
       
      Tasks Performed
       
      Essential Duties and Responsibilities include the following with other duties as assigned:
      Assigned design tasks include but not limited to: basic aircraft electrical design, wiring  installations, wiring diagrams, cable assemblies/harnesses, detailed assemblies and  internal specifications.
      Works under the direction of an engineering manager, maintains or modifies basic electronic/electrical system/subsystems based on defined requirements using approved processes and tools.
      Participates in teams to support the development of designs. Supports the documentation of design implementation.
      Obtain, interpret, and analyze OEM airplane install drawings using approved processes and tools.
      Obtain, interpret, and analyze OEM airplane electrical design data.
      Provides technical, design and informational support for airplane modifications (including full-time on-site modification support and on-call home-team support), manufacturing support and/or in-service issues.
      Troubleshoots basic electronic/electrical system/subsystems problems.
      Actively support engineering department goals and initiatives.
      Coordinate with other departments as necessary.
      Utilize internal drawing/document standards per customer or regulatory agency requirements.
      Some domestic or international travel may be required.
      Perform engineering design check and sign documents.  With periodical technical Provides technical, design and informational support for complex production, product support or in-service issues. Effectively troubleshoots difficult, intermittent, chronic or complex system problems.
      Perform analysis of engineering designs including but not limited to Electrical Load Analysis (ELA), System Safety Assessment (SSA), Transverse Separation Analysis (TVSA), etc.
      Define and oversee Design Validation testing including but not limited to Engineering Functional Testing, EMI Ground/Flight Testing, etc.
      Define engineering task scope (such as work scope validation) for design tasks.
      Perform engineering design/analysis with minimum technical guidance.
      Provide junior level mentoring and performance management input to PE/Functional Manager.
      Perform engineering design approvals (design/approval authority) and task scheduling (such as detailed schedule of a given task per program requirements).
      Perform engineering design analysis and validation (such as engineering development testing, airplane and component functional test procedure, HALT, HASS, component qualification testing per RTCA/DO-160, etc).
      Perform engineering project scope review, project time estimates and project RFQ commitment, along with resources planning and assignments.
      Act as design authority for design tasks.
      Define engineer tasks for PE/functional manager.
      Desired Education
      BS degree Electrical Engineering, Aerospace Engineering or related Engineering field preferred
      Desired Degree
      BS degree Electrical Engineering, Aerospace Engineering or related Engineering field preferred
      Desired Job Experience

      Education and/or Experience
      BS degree Electrical Engineering, Aerospace Engineering or related Engineering field and 8 years or more of experience or equivalent working experience (18 years minimum in an aerospace related field).  Education level required, and amount of relevant experience required here.

      Notes:
      Should have Aircraft Modification or Retrofit Experience, Electrical background.
      experience in any of the following
      Aircraft Installations
      Boeing Aircraft preferably 777
      AutoCAD
      Electrical Systems design
      Wiring Diagrams
      Harness design
      Cabin Databases and Lighting Databases is a plus

      The Structures Company, LLC is an AA/EOE
       
      Job Location: Everett, WA
      Rate: up to 55/hr
      Per Diem: yes
      Overtime: possible
      Duration: 6 mos +
      Start Date: asap
      Input Date: 12/13/2017
      Firm Name: STRUCTURES COMPANY LLC
      Attention: Mark Sharp
      Address: P O BOX 2278
      City, State: SEAL BEACH, CA 90740
      Phone: 714/823-3000
      Email: marksharp@thestructurescompany.com
      Website: www.thestructurescompany.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Design Engineer

      Description:
      Electrical Design Engineer
      Savannah, GA
      Rate: $60-$63

      Unique Skills:

      Unique Skills: Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

      Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

      Other Requirements:
      10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

      Position Purpose:
      Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

      Principal Duties and Responsibilities:

      Essential Functions:
      1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

      Additional Functions:
      1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

      Other Requirements:
      1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill
      and abilities appropriate for this grade will be established by each discipline
       
      Job Number: 7701
      Job Location: Savannah, GA
      Rate: $60-$63
      Per Diem: Yes
      Overtime: Possible
      Duration: LT
      Start Date: ASAP
      Input Date: 10/03/2017
      Firm Name: INCONEN CORPORATION
      Attention: Cathy O'Neil
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Website: www.inconen.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Design Test Engineer

      Description:
      Electrical Test Engineer: Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

      Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns. Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired.

      Experience should also include five years working on the testing of complex mechanical systems, testing of electrical systems and components such as motor controllers, actuator controls, & system controllers. Capability of working independently and is self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required. T
       
      Job Number: CT38872
      Job Location: Windsor Locks, CT, CT
      Rate: 67.00
      Per Diem: Possible
      Overtime: Possible
      Duration: 1 year
      Input Date: 09/06/2017
      Firm Name: APOLLO PROFESSIONAL SOLUTIONS
      Attention: Bill Carriveau
      Address: 7310 RITCHIE HWY STE 400
      City, State: GLEN BURNIE, MD 21061-3092
      800 Phone: 866/277-3343
      Website: www.apollopros.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Design and Aircraft Interior Eng Contractor TS II

      Description:
      UNIQUE SKILLS
      Experience in engineering liaison and design of electrical systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, cabin management and communication systems. Experience in writing engineering corrective action dispositions by performing associated research; creating modification wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop) AutoCAD, CATIA V5 and SmarTeam experience preferred Take ownership of deliverables produced & their quality. Coordination with the other Engineering disciplines, client and vendors. Experience with leadership/program management on a design program. Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

      EDUCATION AND EXPERIENCE REQUIREMENTS
      Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

      POSITION PURPOSE
      Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

      PRINCIPLE DUTIES AND RESPONSIBILITIES
      ESSENTIAL FUNCTIONS
      1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
      2. Is consulted extensively by associates and others as a recognized authority within the field
      3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
      4. Approach to problem solving balances technical product, cost and schedule
      5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
      6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

      ADDITIONAL FUNCTIONS
      1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

      OTHER REQUIREMENTS
      1. Advanced degree in engineering, or related curriculum preferred.
      2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
       
      Job Number: 17-777-110701
      Job Location: Southeast
      Rate: $65.00 to $70.00/per hour
      Per Diem: Split
      Overtime: Possible
      Duration: 6 mths +
      Start Date: ASAP
      Input Date: 10/19/2017
      Firm Name: AGENTE TECHNICAL
      Attention: Alexa Bui
      Address: 714 CENTERPARK DR STE 140
      City, State: COLLEYVILLE, TX 76034-2852
      Phone: 972/415-4545
      800 Phone: 866/758-2494
      Fax Phone: 866/717-5927
      Website: www.agentetech.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Design and Aircraft Interior Engineer

      Description:
      • Experience in engineering liaison and design of electrical systems that are part of and support aircraft interiors.
      • This includes:
      o Entertainment, power, lighting, cabin management and communication systems.
      • Experience in writing engineering corrective action dispositions by performing associated research
      • Creating modification wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop)
      • AutoCAD, CATIA V5 and SmarTeam experience preferred
      • Take ownership of deliverables produced & their quality.
      • Coordination with the other Engineering disciplines, client and vendors.
      • Experience with leadership/program management on a design program.
      • Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.
       
      Job Number: 24-195
      Job Location: Savannah, GA
      Rate: $65 to $70/hr
      Per Diem: YES
      Overtime: YES
      Duration: 1 Year plus
      Start Date: ASAP
      Input Date: 10/30/2017
      Firm Name: PRECISION PERSONNEL INC
      Attention: Matt
      Address: 600 CLEVELAND ST STE 700
      City, State: CLEARWATER, FL 33755
      Phone: 727/449-0600
      800 Phone: 877/600-2333
      Fax Phone: 727/449-0627
      Website: www.precisionpersonnel.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Design and Aircraft Interior Engineer

      Description:
      Electrical Design and Aircraft Interior Engineer

      Location: Savannah, GA
      Pay Rate: $65/hr - $70/hr
      Duration: Long Term Contract
      Shift: First

      Unique Skills:
      -Experience in engineering liaison and design of electrical systems that are part of and support aircraft interiors.
      -This includes entertainment, power, lighting, cabin management and communication systems.
      -Experience in writing engineering corrective action dispositions by performing associated research; creating modification wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop)
      -AutoCAD, CATIA V5 and SmarTeam experience preferred
      -Take ownership of deliverables produced & their quality.
      -Coordination with the other Engineering disciplines, client and vendors.
      -Experience with leadership/program management on a design program.
      -Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

      Education and Experience Requirements:
      Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

      Position Purpose:
      Guides successful completion of major engineering programs, or conceives research in areas of considerable scope/complexity supporting development/production of Company products and services

      Principle Duties and Responsibilities/Essential Functions:
      1. Selects appropriate methods, techniques, and evaluation criteria to resolve engineering issues
      2. Is consulted extensively by associates and others as a recognized authority within the field
      3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
      4. Approach to problem solving balances technical product, cost and schedule
      5. Works without appreciable direction; work reviewed from a long-range perspective for desired results
      6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

      Additional Functions:
      1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

      Other Requirements:
      1. Advanced degree in engineering, or related curriculum preferred.
      2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
       
      Job Number: 7765
      Job Location: Savannah, GA
      Rate: 65-70
      Per Diem: Yes
      Overtime: Possible
      Duration: LT
      Start Date: ASAP
      Input Date: 10/06/2017
      Firm Name: INCONEN CORPORATION
      Attention: Rex Calkins
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Website: www.inconen.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Design and Cabin Management Eng Contractor TS II

      Description:
      UNIQUE SKILLS
      Experience in engineering design of electrical systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, cabin management and communication systems. Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop) AutoCAD, CATIA V5 and SmarTeam experience preferred Take ownership of deliverables produced & their quality. Coordination with the other Engineering disciplines, client and vendors. Experience with leadership/program management on a design program. Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

      EDUCATION AND EXPERIENCE REQUIREMENTS
      Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.


      POSITION PURPOSE
      Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

      PRINCIPLE DUTIES AND RESPONSIBILITIES
      ESSENTIAL FUNCTIONS
      1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
      2. Is consulted extensively by associates and others as a recognized authority within the field
      3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
      4. Approach to problem solving balances technical product, cost and schedule
      5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
      6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

      ADDITIONAL FUNCTIONS
      1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

      OTHER REQUIREMENTS
      1. Advanced degree in engineering, or related curriculum preferred.
      2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
       
      Job Number: 17-776-111061
      Job Location: Southeast
      Rate: $65.00 to $70.00/per hour
      Per Diem: Split
      Overtime: Possible
      Duration: 6 mths +
      Start Date: ASAP
      Input Date: 11/30/2017
      Firm Name: AGENTE TECHNICAL
      Attention: Alexa Bui
      Address: 714 CENTERPARK DR STE 140
      City, State: COLLEYVILLE, TX 76034-2852
      Phone: 972/415-4545
      800 Phone: 866/758-2494
      Fax Phone: 866/717-5927
      Website: www.agentetech.com

      Electrical Design and Cabin Management Eng Contractor TS II

      Description:

      PDS Tech is seeking an  Electrical Design and Cabin Management Eng Contractor TS II for an open position in Savannah, GA.

      Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

      Principle Duties and Responsibilities:

      Essential Functions:
      1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative 

      Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

      Education and Experience Requirements: Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job. 

      Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.



      Unique Skills: Experience in engineering design of electrical systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, cabin management and communication systems. Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop) AutoCAD, CATIA V5 and SmarTeam experience preferred Take ownership of deliverables produced & their quality. Coordination with the other Engineering disciplines, client and vendors. Experience with leadership/program management on a design program. Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.


       
      Job Number: 1710072188
      Job Location: Savannah, GA
      Duration: 6 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Jyotsna Sivan
      Address: 900 CIRCLE 75 PKWY SE STE 600
      City, State: ATLANTA, GA 30339
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000023AC7AAM&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Design and Cabin Management Engineer

      Description:
      Experience in engineering design of electrical systems that are part of and support aircraft interiors. This includes:
      • Entertainment, power, lighting, cabin management and communication systems. Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop)
      • AutoCAD, CATIA V5 and SmarTeam experience preferred
      • Take ownership of deliverables produced & their quality.
      • Coordination with the other Engineering disciplines, client and vendors.
      • Experience with leadership/program management on a design program.
      • Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

      Education and Experience Requirements :
      • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
      • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
      • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
       
      Job Number: 24-194
      Job Location: Savannah, GA
      Rate: $65 to $70/hr
      Per Diem: YES
      Overtime: YES
      Duration: 1 Year plus
      Start Date: ASAP
      Input Date: 10/30/2017
      Firm Name: PRECISION PERSONNEL INC
      Attention: Matt
      Address: 600 CLEVELAND ST STE 700
      City, State: CLEARWATER, FL 33755
      Phone: 727/449-0600
      800 Phone: 877/600-2333
      Fax Phone: 727/449-0627
      Website: www.precisionpersonnel.com

      Electrical Design and Cabin Management Engineer

      Description:
      Electrical Design and Cabin Management Engineer

      Location: Savannah, GA
      Pay Rate: $65/hr - $70/hr
      Duration: Long Term Contract
      Shift: First

      Unique Skills:
      -Experience in engineering design of electrical systems that are part of and support aircraft interiors.
      -This includes entertainment, power, lighting, cabin management and communication systems.
      -Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop)
      -AutoCAD, CATIA V5 and SmarTeam experience preferred.
      -Take ownership of deliverables produced & their quality.
      -Coordination with the other Engineering disciplines, client and vendors.
      -Experience with leadership/program management on a design program.
      -Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

      Education and Experience Requirements:
      Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

      Position Purpose:
      Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

      Principle Duties and Responsibilities/Essential Functions:
      1. Selects appropriate methods, techniques, and evaluation criteria to resolve engineering issues
      2. Is consulted extensively by associates and others as a recognized authority within the field
      3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
      4. Approach to problem solving balances technical product, cost and schedule
      5. Works without appreciable direction; work reviewed from a long-range perspective for desired results
      6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

      Additional Functions:
      1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
      Other Requirements:
      1. Advanced degree in engineering, or related curriculum preferred.
      2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
       
      Job Number: 7764
      Job Location: Savannah, GA
      Rate: 65-70
      Per Diem: Yes
      Overtime: Possible
      Duration: LT
      Start Date: ASAP
      Input Date: 12/12/2017
      Firm Name: INCONEN CORPORATION
      Attention: Rex Calkins
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Email: rex@inconen.com
      Website: www.inconen.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Engineer

      Description:
      SUMMARY
      Performs a variety of engineering work including design, analysis, substantiation, certification, drawing interpretation and project management as related to transport category aircraft.

      ESSENTIAL DUTIES AND RESPONSIBILITIES
      Create step by step work instructions for the removal and installation of hardware and components as they relate to aircraft structures, systems, interiors and avionics. Troubleshooting of noted aircraft systems Repair, design and analysis of metal, composite and metal bond structures Knowledge of the Federal Aviation Regulations FARs from Title 14 of the Code of Federal Regulations as they apply to transport category aircraft. Knowledge of cabin specific regulatory requirements, including flammability and crashworthiness as examples Familiarity with the Supplemental Type Certificate STC process Familiarity with the FAA Airworthiness Directive AD process and rules governing disposition Translates guidance and engineering principles and procedures into usable working direction for assigned projects Ability to read and interpret technical drawings, preferably those created by Boeing, Airbus and Douglas. They should also be familiar with the documents needed to routinely maintain commercial aircraft Structural Repair Manual SRM, Aircraft Maintenance Manual AMM, Illustrated Parts Catalog IPC, etc. Ability to analyze Original Equipment Manufacturer OEM source documents Service Bulletins, Service Letters, etc. and make independent decisions based on analysis of available data regarding incorporation on Customers fleet. Ability to quickly learn and adhere to Operators specific processes and procedures. Project Management skills multiple task Gathers, coordinates and applies basic engineering data using established and appropriate or defined engineering principles and procedures Applies area of specialty to design, develop and implement creative and innovative solutions to difficult problems Reviews progress with management and recommends corrective action along with review of alternatives Performs such individual assignments as supervisors and superiors may direct ensures adequate and continuous controls are exercised over all assigned activities affecting quality establishes and maintains effective work relationships within the department, the Corporation and the community and maintains the professional competence, knowledge and skill necessary for the satisfactory performance of all assigned responsibilities Travel as required All other duties as assigned.
       
      Job Number: 17-729
      Job Location: Midwest
      Rate: Open
      Per Diem: Split
      Overtime: Possible
      Duration: 6 mths +
      Start Date: ASAP
      Input Date: 11/30/2017
      Firm Name: AGENTE TECHNICAL
      Attention: Alexa Bui
      Address: 714 CENTERPARK DR STE 140
      City, State: COLLEYVILLE, TX 76034-2852
      Phone: 972/415-4545
      800 Phone: 866/758-2494
      Fax Phone: 866/717-5927
      Website: www.agentetech.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Engineer

      Description:
      US Citizen

      Proficient in VHDL and related tool suites
      Proficient use and understanding of ASIC/FPGA engineering concepts, principles, and theories
      Proficient in the principles and techniques of ASIC/FPGA design
      Proficient understanding of ASIC/FPGA processes
      Proficient knowledge of other related disciplines
      Keeps abreast of technology trends
      Proficient awareness of business objectives and Engineering's role in achieving
      Proficient in Microsoft Office applications
      Proficient in ASIC/FPGA design tools
       
      Job Number: 40618
      Job Location: NJ
      Rate: Open
      Per Diem: Split
      Overtime: Possible
      Duration: 6 mos +
      Start Date: ASAP
      Input Date: 09/05/2017
      Firm Name: PANTHER GROUP
      Attention: Marques
      Address: 5 MILL AND MAIN PL STE 430
      City, State: MAYNARD, MA 01754
      Phone: 781/790-7900
      800 Phone: 800/776-0562
      Fax Phone: 781/672-2570
      Website: www.thepanthergrp.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Engineer

      Description:
      • Responsible for developing, modifying and implementing electrical power distribution and avionics system designs
      • Originate specifications, control documents, test plans, test reports, and / or other documentation in support of repairs, and STC electrical power distribution and avionics alterations, design and development activities
      • Support project efforts to interpret customer requirements into system requirements and specifications
      • Prepare material for, and conduct periodic design reviews
      • Apply certification, inspection and maintainability requirements to the design
      • Ensure that all specifications, designs and developments adhere to civil aviation, technical and aerospace industry standards
      • Provide support in the development and maintaining of configuration baselines for aircraft / avionics systems and sub-systems
      • Familiar with computer-aided design and drafting packages including AutoCAD
       
      Input Date: 08/30/2017
      Firm Name: JOHNSON SERVICE GROUP
      Address: 1600 AIRPORT FWY STE 400
      City, State: BEDFORD, TX 76022-6871
      Phone: 817/545-4009
      Fax Phone: 817/545-2006
      Website: www.jsginc.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Engineer

      Description:
      Huntsville, Al, Tucson, Az or McKinney, Tx
      Sr. Electrical Engineer I - 39357
      Hunstville, AL
      Senior Designer or Electrical Engineer with understanding and wide application of technical theories, and concepts in digital design, with general knowledge of other related disciplines. The Senior Designer provides technical solutions to a wide range of difficult problems. This position will function in a multi-disciplined design team. The person will be the Responsible Engineering Authority (REA) for hardware design, fabrication, assembly, test, and integration of a circuit card. Designs include technology of processors, FPGAs, memory, and industry interfaces, such as PCIe, Ethernet, I2C, UART. Candidates can independently determine and develop approach to solutions to contribute to the completion of specific programs and projects.

      Required Skills:
      • A minimum of 4 years’ experience in Digital Design
      • Proven ability to take a design concept from the block diagram or requirements level and develop a complete hardware design
      • Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution.
      • Experience with embedded test techniques, design for test, design margin analysis and circuit design for production • A strong advocate for process improvement
      • A self-motivated and effective communicator • Experience in managing schedule and resources to meet assigned milestones • Ability to obtain and retain security clearance

      Desired Skills:
      • Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES)
      • Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)
      • Six Sigma specialist


      Required Education (including Major):
      Bachelor’s Degree in Electrical Engineering (MS preferred) or similar degree and meets the experience requirements
       
      Job Number: 39357
      Job Location: Huntsville, Al
      Duration: 18 months
      Start Date: ASAP
      Input Date: 08/30/2017
      Firm Name: APOLLO PROFESSIONAL SOLUTIONS
      Attention: Rick Nussbaum
      Address: 1700 WELLS RD STE 1
      City, State: ORANGE PARK, FL 32073-2373
      Phone: 904/562-3215
      800 Phone: 866/277-3343
      Fax Phone: 904/713-2000
      Website: www.apollopros.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Engineer

      Description:
      Must be able to interview in person.

      The EE in this position will be responsible for the design, implementation and testing of electrical/electronic systems for new unmanned vehicles. The ideal candidate will participate in requirements and design reviews, translate requirements into electrical designs. The candidate must work well with customers, contractors, and mechanical engineers to effect implementation of system requirements. The EE reports to the Chief Engineering, Program Manager and Technical Director.
      Required Skills and Responsibilities:
      • Perform studies, trades, and analysis as required to support system requirements and their evolution.
      • Electrical circuit design, experience with modifying existing designs or create new designs
      • Proficient in electrical CAD tools for schematic capture and PCB layout.
      • Knowledge of wire harness design, including selection of connectors, wires and cables.
      • Work with designer to lay the cable runs into the CAD model of the airframe.
      • Document systems design, systems analysis, system interface design, and systems integration.
      • Familiar with embedded board systems design
      • Embedded systems and microcontroller implementation and programming
      • Knowledge of common data bus standards and implementations.
      • Interact with customers regarding new capability implementation and integration into an existing network infrastructure.
      • Interface effectively with users, customers, management, and other engineering personnel
      • Proven teamwork and interpersonal skills with the ability to act in a mentor role and be an advocate for positive change.
      • Possess strong verbal and written communications skills.
      • Ability to create and follow standard processes and clearly document results.
      • Knowledge of aircraft electrical systems.

      Preferred Qualifications:
      • Familiar with the Microchip PIC family embedded systems
      • Altium Schematic and Board Layout
      • UAV/Aircraft Integration and Testing
      • Accustomed to working with SAE or DoD standards for aircraft electrical systems.
      • Knowledge of power generation and conversion systems.
      • Knowledge of airborne communications hardware (standard interfaces and protocols, networking, SATCOM, data links, cellular, etc…

      Typical Education/Experience Level 2/3 - Degree and typical experience in engineering classification: 5-9 Years with Bachelors of Science (engineering degree preferred); 3-5 Years with Masters; 10-13 years of experience may be considered in lieu of degree.
       
      Job Number: D115
      Job Location: Irvine, CA
      Rate: $50 - $55
      Per Diem: No
      Duration: 12 mos
      Input Date: 08/30/2017
      Firm Name: 804 TECHNOLOGY
      Attention: Dwayne Crecelius
      Address: 5381 HIGHWAY N STE 201
      City, State: COTTLEVILLE, MO 63304
      Phone: 636/928-0330
      Fax Phone: 636/530-3693
      Website: www.804technology.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Engineer

      Description:
      Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to: -Cabin Management System -Cabin Entertainment System -Cabin Lighting -Cabin Switch Controls -Telephone System -Satellite communications -Water System -Waste System -EWIS -Cabin interior monuments -Seats

      Education/Experience
      Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

      Essential Functions:
      1. Contributes to planning, developing and coordinating of important engineering projects
      2. Provides specialized technical assistance to team members
      3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
      4. Determines and develops own approach to solutions within schedule and cost objectives
      5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
      6. Acts as liaison with representatives outside of the assigned group/area.
       
      Job Number: 24-175
      Job Location: Savannah, GA
      Rate: $58-$63
      Per Diem: YES
      Overtime: YES
      Duration: 1 YR+
      Start Date: ASAP
      Input Date: 10/30/2017
      Firm Name: PRECISION PERSONNEL INC
      Attention: Matt
      Address: 600 CLEVELAND ST STE 700
      City, State: CLEARWATER, FL 33755
      Phone: 727/449-0600
      800 Phone: 877/600-2333
      Fax Phone: 727/449-0627
      Website: www.precisionpersonnel.com

      Electrical Engineer