Job Search Results

918 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2017/10/18 Wednesday 06:05AM Pacific Time by ContractJobHunter. )

Listings 1 - 918

Go To My Job Tracker

Expand all descriptions

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 10/18/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: [

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2117 - ELECTRICAL WIRING DESIGNERS (EWIS) - cv, word doc only

Description:
Perform as a technical authority in wiring 3D design.

Perform as a technical authority in wiring diagram design.

Review and approve WD documentation and datasets in part or in whole.

Provide technical support on change management implementation (RFC, PCR).

Recommend and approve design changes

Provide technical leadership, coaching, men.toring and training to staff.

Identify and manage technical risks & opportunities.

Support Supervisor to disposition conflicting requests from different stakeholders.

Communicate lessons learned to other community members.


Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have a minimum of 15 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Have experience with Mentor Graphics Logic tool.

Have a strong sense of responsibility and have good organization skills.

Have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM's, RAE documents and BAPS related to harnesses (Client Eng Practices).

Must Know the Harness Configuration Process and can develop associated tools.

Must have mastered CATIA 3D wiring design electrical workbench suite.

Must Master 2D design diagram and schematics.

Must Master Knowledge of wiring parts qualification.

Must Master Knowledge of the wiring design process.

Must Master Knowledge of wiring parts selection in aircraft systems.

Must Master strong communication and negotiation skills.

Must Master excellent troubleshooting skills.

Must Master Knowledge of New EWIS Regulations.

Must be flexible, may be required to contribute by participating to other tasks depending on program needs and demonstrating flexibility to adapt.
 
Job Number: 2117
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2146 - AVIONICS SYSTEM ENGINEER - resume word doc. only

Description:
Perform technical integration activities associated with all Client Avionic systems.

Generate requirements, analyze, review and approve system designs, oversee system integration, coordinate with various Integrated Product Teams/Suppliers, work with all departments for design validation and verification, testing and certification and provide support to certification authorities as required.

Review and approve the suppliers design through participation in the supplier's development, design, manufacture, integration, and verification process.

Assist in functional, integration, qualification, and ground/flight testing of all the Client avionics systems.

Perform ground and/or flight testing activities for Client avionics systems on dedicated specialist test rigs.

Develop testing procedures, perform test preparation and undertake test vehicle validation.

Participate in troubleshooting and develop/implement resolution plans when testing anomalies occur.

Be asked to work on various avionics systems including but not limited to: Auto-flight: Flight guidance, Auto-throttle, Autoland;
Flight Displays: EFIS, EICAS, HUD;
Flight Management Systems (FMS): Navigation, RNP etc.
FANS/LINK 2000
Communications including VHF, CPDLC, HF, SATCOM etc.
Digital Integration: Integrated Modular Avionics, Data-buses ARINC 429, AFDX, TTP etc).
CVR/FDR, Inertial Reference System and other Client secondary Avionics Systems.


University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent.

Must have 15 or more years of relevant aerospace systems experience.

Have a good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Have a good knowledge of RTCA documents DO-178 and DO-160.

Are familiar with part FAR25 / 525 certification process and with the ARP4754 standard.

Have an experience with civil aircraft in a production or maintenance environment (asset).

Have strong communication skills (written and spoken).

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc). Weekend, night and evening shift may be expected.

Occasional business trips to Wichita, KS may occur.
 
Job Number: 2146
Job Location: Mirabel, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2154 - PROJ. ENGINEER - ELECTRICAL WIRING DESIGN - resume word doc only

Description:
Provide project management support for multiple projects dealing with changes to the basic aircraft, options and in-service issues.

Establish the project scope, define implementation strategies & risks and present business cases

Prepare & maintain schedules, cost control & progress reports

Support the Service for the delivery of engineering solutions (drawings, modsums, etc) and ensure functional groups meet their commitments until successful implementation.

Take meeting minutes and actions and insure a proper follow-up to reach goals and expectations

Contribute by participating to other tasks depending on program needs and demonstrating flexibility to adapt.

University degree in engineering and/or a related field and/or minimum of fifteen (15) years equivalent experience in the aerospace industry.

Proven experience in project management and/or project engineering.

Demonstrate superior organizational and leadership skills and feel comfortable in a dynamic and changing work environment.

A high level of communication skills in both French and English is an asset.

Preference will be given to candidates who are PMP members of the PMI (Program Management Institute).

Knowledge of the Client Engineering System and client Change Management process would be an asset.

Knowledge of Electrical Harness Design would be a strong asset.

An understanding of aerospace product certification is an asset.

Must be proficient with MS Office applications including MS Project, Power Point, Excel and Access.

Certification in Project Management is an asset

An understanding of aerospace product certification is an asset.
 
Job Number: 2154
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/16/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2181 - EMC ENGINEERING SPECIALIST - cv - word doc only.

Description:
Analyze new harness designs, assess impact on systems, propose EMC compliance approaches, write/review test plans, test procedures and test reports,

Analyze modifications at aircraft level and check compliance with certification regulations,

Support and witness EMC tests in Canada, United States and Europe as needed

Scope the critical work needed, estimate the time required, plan and execute according to priorities.

Master of Science degree in EMC Engineering, or alternatively a Bachelor's degree in Electrical or Physic

Engineering with five (5) years aerospace experience,

Minimum of five (5) years working experience in EMC/HIRF/Lightning,

You have EMC testing experience,

Minimum of two (2) years working experience with cabling/harness design,

General knowledge of aircraft and harness design,

You have good oral and technical writing skills in English (French is an asset),

Strong communication, troubleshooting and negotiation skills,
 
Job Number: 2181
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 10/03/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2196 - RM&S ENGINEER - resume word doc only please.

Description:
Be part of the Client R,M&S team, for the Client aircraft, and the primary tasks are to conduct aircraft safety and/or system safety activities, and to support all design activities.

Be responsible for RM&S deliverables specific to the assigned systems.

Participate in the, system functional hazard analysis, aircraft and system fault tree analysis, system safety assessment, failure mode and effect analysis and the final R,M&S certification report.

The duties will also require certification activities. This will involve co-ordination of technical issues and resolutions across all Client, Partner/Supplier, Regulatory and Customer parties.

University graduate in electrical/mechanical engineering with at least 15 years R,M&S experience.

Have a strong electro-mechanical background and has an excellent understanding of aircraft performance characteristics, aircraft systems definition, integration, interfaces, component qualification, reliability and safety requirements and certification process of flight controls systems.

Preferably have been directly involved in the aircraft definition and certification.

Must be very cognizant of the relevant Airworthiness Regulations and certification process.

Have the ability to communicate sound technical proposals and work status to senior management, be a team player, a self-motivated person and be able to work under pressure.

Possess a strong sense of responsibility and integrity.

Have good oral and technical writing skills in English are required (French is an asset).

Possess basic knowledge of MS Office.

Knowledge of creating Failure Mode Effect Analysis (FMEA), Fault Tree Analysis (FTA) and Safety Analysis is required.

Aircraft Level System Safety, preferably in Hydro-Mechanical but could also be Electrical Avionics.

Must have Aircraft Level Knowledge of the following:
In-depth aircraft level understanding FMEA - Failure mode and effects analysis
FTA - Fault Tree Analysis, CMA - Common Mode Assessment
CCMR Process - Candidate Certification Maintenance requirement
25.1309 Regulation
ARP4761 Safety process

Software Skills:
CAFTA required
Must be proficient with Excel
MS Access database development would be asset
Microsoft Office Suite
CATIA would be an asset
 
Job Number: 2196
Job Location: Montreal, Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/16/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2213 - ELEC. SYS. SCHEMATIC DIAGRAM DESIGN - cv, word doc only

Description:
WILL PROVIDE ADDITIONAL INFO


Bachelor Degree in Aircraft Avionics or Electrical Engineering or Bachelor Degree in Engineering with equivalent work experience in Wiring Integration or Methods.

Minimum fifteen (15) years of relevant working experience in Aerospace .

Knowledge of Mentor Graphics (ESSD) is mandatory.

Have wiring design, wiring installation and/or wiring is a plus.

Must know the Harness Configuration Process.

Must have mastered CATIA 3D wiring design electrical workbench suite.

Possibility for shift work on any day and/or at any time of day Day shift but possibility to work Evening Shift on occasion.
 
Job Number: 2213
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 3+Mths
Start Date: ASAP
Input Date: 10/16/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2226 - CABINET INTEGRATOR - resume - word doc only

Description:
Act as a specialist in aircraft interior cabinets.

Search for information related to project assignment to the interior and exterior of the aircraft.

Manage customer requests related to customizations of interior options.

Establish technical requirements, mechanical and electrical interfaces and design, integrate, certify, test and troubleshoot the systems described above.

Assume responsibility for Definition engineering deliverables and milestones that the department must meet.

Must be challenge-driven, results-oriented and problem-solving oriented.

Excellent knowledge in design and development of concepts using graphic design software.


Bachelor's Degree in Mechanical or Equivalent Engineering or college with a minimum 5 years of relevant experience.

Familiar with the CATIA V5 3D design tool.

Must have experience in the design or installation of cabinets to be assembled.

You are well organized and focused on projects.

Must have good oral and written communication skills in English and French.

Able to work in a multidisciplinary teams, you adapt easily to changes, and customer satisfaction is your number one priority.

Customer focused, problem-solving and innovative focus as well.

Autonomous, flexible and results-oriented through project management skills.
 
Job Number: 2226
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 10/16/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2228 - AVIONICS SYSTEMS INTEGRATOR - resume - word doc only

Description:
Responsible, as an Avionics Systems Integrator Specialist, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Challenger aircrafts.

Responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate and define Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Flight Test Center in development and certification tests; witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.


University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent.

Must have at least eight (8) years of relevant experience with the design, development, integration and certification of Avionics systems.

Have a good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Good knowledge of RTCA documents DO-178 and DO-160.

Good knowledge of part FAR25/525 certification process and with the ARP4754 standard.

Experience with civil aircraft and airworthiness authorities.

Systems: Datalink, Flight Management System and Display integration.

Proficient with the use of Microsoft Office software tools to produce presentation and reports.

Ability to work well in a team environment.

Strong communication skills (written and spoken).
 
Job Number: 2228
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 09/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2231 - ELECTRICAL HARNESS DESIGNER - resume - word doc only

Description:
Produce and deliver Harness Data Reports based on Digital Mock-up and Mentor Graphics.

Integrate the design of the wire harnesses.

Incorporate changes (RFC, PCR) on the harness data reports.

Contribute to the team effort by meeting the team%u2019s objectives for productivity and quality.

Contribute to other relevant tasks needed to support the team%u2019s objectives.

Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have experience with harness manufacturing or methods.

Have a minimum of 5 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Mentor Graphics Harness XC tool knowledge is the primary requirement.

Also have experience with Catia V5.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Communicate clearly and openly with your team.

Embrace changes and new ideas.

Are persistent to reach your goals.

Seek out and accept feedback.
 
Job Number: 2231
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/16/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2236 - INTERIORS INTEGRATOR - cv - word doc only

Description:
Perform engineering integration of cabin systems.

Create engineering requirements to integrate as part of the Functional Tests Engineering Requirements (FTER) and certification documentation related to cabin systems.

Review and approve new cabin systems concepts and prepare related Aircraft integration documentation.

Create required documentation such as technical white papers, functional diagrams, Technical requirement Documents (TRD) and statement of Work (SOW).

Supplier coordination and follow-up.

Provide production support and answer promptly to raised issues according to their assigned priority level.

Perform troubleshooting when required, to minimize issues
impact on customer and/or in production.

Bachelor in Electrical Engineering or equivalent and accumulated at least five (5) years of experience with aircraft mechanical systems.

Experienced with project and Supplier management.

Bilingual (French - English) written and spoken.

Ability to work with minimum supervision, within a multi-disciplinary team.

Proven record of leadership and technical problem solver.

Must be proficient in 3D design with CATIA V5.

Must be customer-oriented with innovative problem solving skills.

Relevant technical experience in interior completion is required.

Knowledge of certification requirements is an asset.

Understanding of interiors products integration in Business (preferred).

Must have design experience in cabinet assembly design and/or cabinet installation.

Experience in interiors completion Design is an asset.

Must be capable of obtaining Design Authority status.
 
Job Number: 2236
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2237 - ELECTRICAL WIRING INTERCONNECT SYSTEM - cv - word doc only

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.

Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical.

Capable of interfacing with wiring diagrams, system, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

Support to Production; respond to RNC.

Provides technical assistance to engineering staff and
contributes to completion of project milestones.

Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.


University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Minimum 11 years of relevant aerospace experience.

Excellent verbal and written communication skills, and computer skills (PC/MS Office) are require.

Must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative.

Must have wiring design, wiring installation and/or wiring troubleshooting experience and you are familiar with ECAD tools & processes.

Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

Must Know the Harness Configuration Process and can develop associated tools.

Must have mastered CATIA V5 3D wiring design electrical workbench suite.

Must Master 2D design diagram and schematics.

Must Master Knowledge of wiring parts qualification.

Must Master Knowledge of the wiring design process.
 
Job Number: 2237
Job Location: Mirabel, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2239 - CABINET DESIGNER - cv. word doc only

Description:
Act as a specialist in a specific system/monument.

Define technical specifications, mechanical/electrical interfaces, design, integrate, certify, test and troubleshoot the above described systems.

Organize and attend design reviews taking into consideration industry regulations, Client Design Practices and requirements.

Be in direct contact with suppliers and responsible for the delivery of quality engineering documentation that meets Client Standards.

Research, design and evaluate new technical concepts or emerging technologies. (Trade Shows, Air Shows, technical exhibitions, etc).

Procure parts and supply instructions drawings to employees to build mock-ups/prototype.

Provide definition engineering in relation with new designs.

Support the creation of Interface Control Drawings (ICD).

Report status, identify and mitigate roadblocks.

Point of contact on a technical level for designers.

Accountable for engineering deliverables and milestones for a group of monuments.

Bachelor's degree in Mechanical Engineering with 5 to 8 year experience.

Knowledgeable in 3D design with CATIA V5.

Organized and project oriented.

Must be bilingual and have good communication skills including good English and French writing and verbal skills.

Are a team player, working in a multidisciplinary team.

Customer-oriented with innovative problem solving skills and you are organized.

Autonomous, flexible and oriented toward result via your project management skill.

Experience and have lead a small group of designers or equivalent.

Have design experience in cabinet assembly design and/or cabinet installation.
 
Job Number: 2239
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 10/16/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2254- RM & SAFETY ENGINEER - cv. word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Client aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers.

Responsible for reviewing Partner's/Supplier's reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Will be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare & present risk assessments for continued airworthiness queries.

Bachelor's degree in engineering, with at least fifteen (15) years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.)
 
Job Number: 2254
Job Location: Toronto, Canada
Rate: 63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/16/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2260 - SR. ELECTRONIC EQUIPMENT DESIGN ASSURANCE - cv - word doc please

Description:
Ensure, by design and documentation reviews and process audits, that suppliers of electronic equipment follow established industry and regulatory guidelines, and sound engineering practices, in developing airborne embedded software and airborne electronic hardware (AEH), such that their products are safe and certifiable.

Liaise with Transport Canada Civil Aviation (TCCA) and produce the necessary compliance data, in order to confirm that suppliers have satisfied all certification authority requirements for software and AEH.

Review safety analyses, attend design reviews, review supplier documentation, and conduct audits on suppliers' software and AEH development products & processes. Where necessary, you will advise suppliers on action required to make their processes and products safe and certifiable, and will ensure that corrective action is carried out.

Technically lead specifically assigned projects and guide more junior group members in achieving their goals.

Keep abreast of the rapidly changing technology and processes, in order to develop and maintain best product development practices' and processes' requirements for the EEDA discipline.


Minimum, Bachelor's degree in Engineering with a specialization in Software, or a degree in Software Engineering or Computer Science.

Minimum, 11 years experience in the development or verification of real-time airborne embedded software applications in a variety of aircraft systems (using RTCA/DO-178B or equivalent standard).

Have experience in the certification, development or testing of airborne electronic hardware (AEH) according to structured development processes (RTCA/DO-254 or equivalent standard).

For both Software and AEH aspects, you are familiar with industry-recognized Software/Firmware Engineering practices, object oriented design, system safety analyses, ARP4754A and ARP4761, DO-178B, or DO-254.

Have experience of software or firmware requirement and design analysis, of writing and of acting as a peer reviewer of life cycle plans, requirements, designs, code, test cases and procedures.

Able to read and critique high-order software coding languages (procedural & object-oriented) or HDL code, as part of the design review activities.

Have working experience in software quality assurance and software configuration management, or experience with certification authorities%u2019 liaison is an asset.

Have good oral and writing skills in the English language.

Must possess the ability to work with minimum supervision, be a team player, be able to work on various projects simultaneously, and have project organization skills.

Take initiative, strong sense of responsibility and good engineering judgment.

Must be available to travel occasionally at suppliers' sites for dedicated process audits.
 
Job Number: 2260
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2262 - TECHNICAL INTEGRATOR - ENGINEERING SIMULATION (ESIM) - cv - word doc

Description:
Ensure ESIM rig readiness for Integration, Validation and BA Acceptance in Montreal :

Ensure proper integration of aircraft systems real time simulation models (RTI models),

Support tests of systems functionality (ATM), malfunctions (MCD) and performance (ATG),

Coordinate snags disposition between ESIM supplier and Client,

Ensure proper level of functionality and performance in accordance with CFTC requirements (Client Flight Test Center),
Finalize implementation of RFC's/PCR's,
Ensure rig configuration control and conformity.

Adhere to Change Management process: early identification of issues/changes/impact statement,

Ensure proper coordination and working link between Client and ESIM supplier: monitor progress, adjust schedule, shuffle priorities to meet schedule

Support reviews of ATM (Acceptance Test Manuals), MCD (Malfunctions Control Documents) and ATG (Acceptance Test Guidelines),

Solve problems in a timely fashion and with a high level of quality,

For any given mission/assignment/problem to be solved, work with the team to provide:


Bachelor's Degree in Electrical Engineering with 5-8 years of experience in Avionic & Electrical Systems, Systems Simulation and Testing area.

Strong communication skills both in English (written, spoken) and French (spoken).

Strong troubleshooting/problem solving skills.

Have the proper attitude to work with Suppliers.

Must have working knowledge using Microsoft Project and Microsoft Office applications.

Are a strong team player and can demonstrate superior organizational and leadership skills.

Autonomous and able to work with little to no guidance.

Driven by results.

Familiarity with part FAR25 / 525 certification process and with the ARP4754 standard, FAR25 requirements and the qualification rules pertaining to avionics/electrical systems is an asset.

Demonstrate initiative, a strong sense of responsibilities and good technical judgment.
 
Job Number: 2262
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 10/16/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2263 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv - word doc only

Description:
Support the Client Final Line Assembly by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Hydro-Mechanical related issues (FBW & Control Surfaces, Wing High Lift, Hydraulics, Landing Gear, Brakes), analyze and develop solutions/recommendations and reports. Disposition RFCs and RNCs as required.

Work with the product development team to assists with technical proposal activities, including preparation of written material and presentations. Recommend and approve design changes.

Support flight test activities including the development and approval of Test Definition Sheets, trouble-shooting FTV issues, Problem Report Resolution, Test Witnessing, Test reports review and approval.

Support all development, Safety of Flight and Certification Testing on suppliers test rigs, systems and structures test rigs

Interface with the Design Approval Delegate (DADs and CDADs) to ensure all design activities and decisions meet regulatory requirement to achieve flawless certification.

Develop good working relationships with various departments within Company and with all suppliers.


Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset.

Experience in providing engineering support to the Final Line/ Production.

5-10 years'experience in aircraft Hydro-Mechanical systems (FBW, Flt Ctrl, Hydraulic, Landing Gear).

Conversant with design, qualification and certification test requirements of Aircraft Electrical systems.

Knowledge of control systems including system controllers%u2019 integration and design and Software/Hardware certification (DO-160, DO-178, etc).

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Familiar with Microsoft Office software tools.

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Must have previous experience with fly by wire, wing high-lift or hydraulic systems on Commercial or Business Aircraft.

Must have experience in the definition and certification of at least one complex aircraft control system. Flight Controls/FBW experience would be an asset.

Must have a good understanding of all facets of system definition, integration, and certification and have a good knowledge of aircraft systems and interfaces (e.g., electrical, Hydraulic , Avionics, Auto-Flight, Flight Controls) integration, testing and installation.

Have a good knowledge of data buses, input signal management including monitoring, redundancy management and mode logic, and failure modes and effects.
 
Job Number: 2263
Job Location: Toronto, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 10/16/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2264 - EMC SPECIALIST - cv - word doc only

Description:
Analyze new systems designs, assess technical impacts, propose EMC compliance approaches, review/approve test plans, test procedures and test reports, and check compliance with certification regulations.

Support and witness EMC tests in Canada, United States and Europe as needed.

Scope the critical work needed, estimate the time required, plan and execute according to priorities.


Master degree in Electrical or EMC Engineering, or alternatively a Bachelor's degree in Electrical or Physics Engineering with eight (8) years aerospace experience.

Have a minimum of eight (8) years working experience in EMC/HIRF/Lightning (FAR 25.981 is an asset).

Have EMC bench testing experience (aircraft testing experience is an asset).

Have a minimum of five (5) years working experience with systems qualification/certification.

Have a general knowledge of aircraft and harness design.

Have good oral and technical writing skills in English (French is an asset).

Have strong communication, troubleshooting and negotiation skills.

Must have a minimum of two (2) years working experience with cabling/harness design.

Must have familiarization with DO160, STD ARP, MIL STD, FAA regulations, as well as other applicable airworthiness regulations.

Must be able to support and witness EMC tests in Canada, United States and Europe as needed.
 
Job Number: 2264
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2266 - AVIONICS SPECIALIST - cv. word doc only please

Description:
Review Systems architecture design to meet Aircraft Design Requirements & Objectives.

Participate in validation and lead verification activities of assigned system requirements.

Manage, review and approve where appropriate, the deliverables of the assigned system.

Plan short to medium term activities required to support development and certification of assigned system.

Chair weekly integrated product development team with cross-functional engineering discipline.

Keep accurate detail records and artifacts.

Write issue papers, advisory circular compliance matrices and certification plan.

Reviews and sign certification design compliance reports.

Reviews and sign electrical system schematics.

Support the flight test program; including witnessing of tests as required.

Bachelor's Degree in a relevant engineering discipline.

Have at least 15 years relevant experience with the design, development, integration and certification of avionics systems; previous experience with Flight Management System, network security, Air Data, Communication / Navigation would be an asset.

Familiarity and understand of pertinent TC, FAA and EASA rules and requirements.

Ability to work well in a team environment.

Available to to travel.

Must have a good knowledge of RTCA documents DO-178 and DO-160.

Must be familiar with part FAR25 / 525 certification process and with the ARP4754 standard.

Must have an experience with civil aircraft and airworthiness authorities (asset).

Must have strong communication skills (written and spoken).

Must have excellent troubleshooting skills.

Workday expectations: Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc).

Mobility: Occasional travel between plants. Must be able to travel to the US and may be required to travel to other plants on occasion.
 
Job Number: 2266
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2270 - FLY-BY-WIRE SYSTEMS ENGINEER - cv. word doc only

Description:
Integration of equipment to the aircraft and development of equipment interface to other systems and structure.

Develop concepts, design approach and philosophy with the system Partner.

Develop, validate and verify technical requirements of the FBW Flight Control System (FCS) electronic controllers and prepare technical requirements documents.

Validate the FBW electronic controller%u2019s hardware definition and oversee their design.

Perform/Review analysis to evaluate concepts feasibility.

Perform trade off studies and life cycle cost analysis.

Oversee the development of electronic controller interface to other systems and structure.

Actively participate to the different peer and design reviews (PDR, CDR, ...) .

Review/Prepare test procedures.

Review/Prepare certification and test reports.

Review supplier qualification documentation and recommend for approval.

Resolve problems arising from the development and certification activities.

University Engineering Degree in electrical engineering (hardware/electronic designs) or equivalent, and have a minimum of 5 years experience in aerospace related field.

Have been directly involved in the definition and certification of at least one aerospace control system.

Possess an excellent understanding of all facets of system definition, integration, and certification and have a good knowledge of aircraft systems and interfaces (e.g., electrical, hydraulic, avionics, auto-flight).

Have a thorough knowledge of electronic controller designs and qualification to aerospace standards.

Strong knowledge of RTCA DO-160.

Good knowledge of RTCA DO-254.

Have a basic knowledge of FBW FCS architecture, input signal management including monitoring, redundancy management and mode logic, failure modes and effects.

Have a basic knowledge of rigorous requirements validation and design verification processes and techniques (ARP4754).

Good knowledge of Part 25 certification process.

Working knowledge of MATLAB/Simulink/Stateflow simulation environment.

Have a good knowledge of MS Office and Requirements Management tools is an asset.

Have excellent oral presentation and technical writing skills in English (French is an asset).

Possess the following soft skills:

Able to work with limited supervision, be organized, a team player, a self-motivated person, Customer focused, and able to work under pressure.

Show initiative, innovation, leadership, a strong sense of responsibility, integrity, adaptability, good interpersonal communication skills, good engineering judgment, and drive for results.
 
Job Number: 2270
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 10/16/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2nd Shift Maintenance Technician

Description:
Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

For consideration to this position, please contact Eric Khassanov at ekhassanov@pdstech.com or 843-277-6611.
 
 


 
Job Number: 1610057656
Job Location: KS City, MO
Duration: 12 months
Input Date: 10/18/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: [

2nd shift Mechanic

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610055807
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 10/18/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: [

A&P Mechanics - 1st Shift

Description:
PDS TECH is looking for A&P Mechanics - 1st shift in Long Beach, CA.

If interested and available - Call 800-234-8644 x 20210
Send resume to: KPelonis@pdstech.com


Position Purpose:

Perform required periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time.  Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications. 


Call 800-234-8644 for consideration.

Principal Duties and Responsibilities
Essential Functions:
1. Perform required periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time.
2. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting.
3. Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned.
4. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications.
5. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
6. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. 7. Operate and supervise use of special support equipment used in removal and installations of major components.
8. Coordinate movement of aircraft as required. 8. Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components.
9. Coordinate with other departments to arrange for the overhaul or repair of customer property as needed. 

Additional Duties:
1. Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers.
2. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags.
3. Implement and apply Lean/continuous improvement processes to all areas of responsibility.
4. Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use.
5. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
6. Perform other duties as assigned. 

Other Requirements: 1. Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. 2. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.) 4. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.
Call 800-234-8644 and/or send your resume to aviationjobs@pdstech.com for consideration.PDS Tech, Inc. is proud to bean Equal Opportunity Employer -Minorities/Female/Disabled/Veteran (EOE M/F/D/V)Founded in 1977, PDS Tech, Inc. is one of the nation's premier specialty staffing firms with 31 offices nationwide.We offer a full range of benefits including:- Health insurance- Paid holidays- Weekly payroll- Immediate 401(k) eligibility- Completion bonuses- TrainingPlease note availability of benefitsmay vary by position.PDS specializes in Engineering and IT arenas including Aerospace, Defense, Electronics, Telecommunications, Automotive, and Energy just to name a few. Our reputation, track record, and years of continuous growth reflect the commitment to quality that our employees and clients experience first-hand. For more information about PDS, please check our website, www.pdstech.com$$$ PDS pays for referrals! $$$We pay thousands each month in referral bonuses!Contact a recruiter for details.To find a branch near you, look at our Branch LocatorThis position may require you to submit to and pass a drug test and/or background check. If this is a hands-on position, you may also be required to pass a safety and productivity examination. PDS Tech, Inc. will comply with all applicable federal and state laws governing the use of such background checks and drug tests.
 
Job Number: 1710068817
Job Location: Long Beach, CA
Per Diem: Yes
Duration: 6 months
Input Date: 10/18/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: [

AIRFRAME DESIGN - Grade 07

Description:
PDS Tech, Inc. is seeking a candidate for AIRFRAME DESIGN - Grade 07 position located in Shelton, CT.

Description: 

  • Have a detailed working knowledge of Air Vehicle systems including Airframe, Propulsion, Subsystems, Landing Gear, Electrical Wiring and Equipment and, Mission Systems as well as equipment, and components whose primary function is mechanical in nature. Examples include: arresting and landing gear, auxiliary power, crew escape, canopy, aerial delivery, cockpit displays, environmental control, fire protection, flight control, fuel, hydraulic, wheels/tires/brakes, life support, mechanical systems (e.g., door drives), pneumatic, and electro-mechanical elements of electrical power and wiring systems that conduct power or data between major components, connectors, and sub-components. 
  • Lead Requirements Flowdown Activity including Verification and support development of Interfaces for ADME Subsegments. This includes development, release and maintenance of Allocated and Product Baseline level client's Engineering Specifications. 
  • Liaison between ADME Subsegments and System Engineering assisting requirement derivation, flowdown, compliance and verification efforts at the Customer, Functional and Allocated baseline levels. 
  • Coordinate Requirements Management efforts with other Core Processes pillars including Supplier Development, Risk Management & EVM to maximize IPTs’ overall success. 
  • Develop best practices including metrics and reports to track requirements and interface development against program milestones as well closure of gaps and compliance items. 
  • Prepare data and present requirements flowdown status and compliance/risk at key customer milestones: milestones (SRR, SFR, PDR, CDR, PRR). 
  • Utilize DOORS as the main tool to perform all requirements and interface development as well as document release. 
  • The Core Services Requirements Development Analyst would be responsible for concurrently shepherding multiple IPTs as described above, perhaps spanning multiple programs and ADME groups with subsequent exposure to multiple Program and Functional Management Teams. 

Experience/Qualifications: 
The ideal candidate will demonstrate many or all of the following qualifications: 
• BS in engineering or equivalent 
• Minimum of 5-7 years of experience in Requirements Management 
• Experience in leading and executing complex tasks 
• Experience in Requirements Management and Systems Engineering is a required 
• Ability to communicate effectively with senior leadership and working level teammates. 
• Highly motivated and flexible individual with a track record of demonstrated results. 
• Must be proficient in using DOORS, MS Excel, MS Word, MS Power Point, and MS Access.
 
Job Number: 1710068326
Job Location: Shelton, CT
Duration: 14 months
Input Date: 10/18/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Ryan Bushey
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: [

Acceptance Technician - Secret Clearance

Description:
PDS Tech, Inc is seeking a candidate for the Acceptance Technician Secret Clearance position located in Dallas, TX.  
Performs a wide variety of technical tasks in support of processes, engineering, quality control, calibration, laboratories, production/test environment, line maintenance and/or chemical handling.
Tests, troubleshoots, repairs, maintains and installs a variety of electronic, electromechanical, and mechanical, computer, laboratory and scientific systems and/or equipment.
May assist in the development of procedures. Selects, sets up and operates engineering and scientific equipment.
Observes, analyzes and reports test data; and when appropriate makes necessary repairs to equipment.
Utilizes various engineering and scientific drawings, manuals and other related documentation in the performance of their tasks.
May include configuration/data management.
Checks for work correctness.
May assist in directing work, assigning and outlining tasks.
Candidate will also be responsible for training/mentoring junior test technicians. 
 
Required Skills:
• Candidate must have 4 years experience in electronics industry or equivalent military electronics experience
• Ability to work directly from approved procedures, schematics, and verbal instructions
• Ability to troubleshoot electronic circuits to component level and effectively identify failure trends
• Ability to isolate problems between the test environment (test station, interface adapter, test cables, etc.) and the units under test and resolve as necessary
• Select appropriate test equipment and configure it based on test specification
• Able to communicate technical issues by generating comprehensive failure entries which correlate failure modes back to the associated test specification(s)
• Ability to interpret test data (plots, graphs, tabulated parameters, etc.) to determine pass/fail condition and determine when further analysis is needed
• Must work well in a team environment
• Candidate must be experienced in the use of computers and software applications (both desktop and technical).
Must be well versed in computer architectures and data protocols in order to facilitate networking/interfacing with other test equipment
• Lifting up to 25lbs, walking, and could involve stair/ladder climbing at the test range(s)
• Candidate must be willing to work second or third shift
• Candidate must have an active Secret Clearance

Desired Skills:
• Radar or Electronic Warfare (EW) systems knowledge
• Direct experience with Radar System and subsystem (Transmitter, Receiver, Antenna, Signal/Data Processor, Power Supply, etc.) evaluation
• Ability to work in a fast-paced manufacturing/production test environment.

Required Education:
Associates Degree in Electronics Science, Military Electronics training or direct experience in testing and troubleshooting of Radar systems
 
Job Number: 1710072910
Job Location: Dallas, TX
Duration: 18 months
Input Date: 10/18/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Jason Andrzejewski
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: [

Administrative Assistant 2

Description:
PDS Tech, Inc. is seeking an Administrative Assistant 2 for an open position in Orlando, FL.
In your role, you will:

The Learning Administrator supports the Learning Campus (LC) US Organization initiatives by coordinating and administering courses, programs and corresponding logistics.
This role works closely with the Learning Partners (Program Managers), Project Managers and Program Facilitators and other vendors to understand course requirements to ensure that programs and offerings are properly planned, created in appropriate learning management system (LMS), managed, executed, and closed appropriately.
Learning Administrators also provide on-site support for courses and programs held at their respective location.
Being accessible and a team player are essential to this role with ability to be flexible and work independently.
This is a very fast-paced environment where ingenuity and customer/team collaboration are valued. 

General duties: 
Supports in organizing and maintaining office supplies/files both physical and electronic.
Schedules resources such as people, meetings, appointments, rooms, and equipment; take calls, emails, case and order inquiries, responds to questions, and escalations.
Ability to prioritize and plan multiple tasks for simultaneous projects is key. 

Drafts and edits semi-complex email messages, templates and other correspondence.
Participates in the preparation of reports, spreadsheets and other documentation as required to customers.
Responsible for accurate input and maintenance of course data in learning management systems as well as extracting database information from multiple technological platforms. Willingness to understand and be passionate about the end-to-end learning experience for employees.
MUST have capacity to support Large Volume of course logistics with all associated tasks and activities within the established deadlines and budget.
MUST have MS Office proficiency.
Read/write French is a PLUS. 

Acts as back up support to other Learning Administrators during absence or vacation periods. 
Specific duties: 
Establishing courses in multiple LMS (Learning Management Systems) 
Monitoring course registration and follow up as needed; 
Coordination of external facilitators and internal support; 
Manage both facilitator and ongoing learner correspondence; 
Booking of course venue and coordination (with point of contact) for all program logistics; 
Coordinate catering (on and off-site) as well as course materials management; 
Organizing technical support as required; 
On-site program support as necessary (i.e. classroom setup, assisting with requests during course, managing the venue setup/cleanup); 
Manage off-site logistics with hosting divisional contact, coordinate internal support; 
Respond to customer/learner inquiries regarding class availability and registration/cancellation process; 
Close courses after completion - update learner records as needed and budget documents; 
Participate in annual course planning sessions with Learning partners team members. 
Finance/Accounting Support (billing procedures, PO creation, invoice audits and submissions, reconciliation of course expenses) 
Case & Order gatekeeper and/or support for incoming customer inquiries; 
Procurement - support purchase of class supplies via OneSRM portal and print materials with Siemens vendors. 
Reporting requirements - in support of scheduled and ad hoc requests for essential course/participant data 

Other support duties to be assigned as identified by the Learning Services Team Lead or Program Manager.
 
Job Number: 1710064658
Job Location: Orlando, FL
Per Diem: No
Duration: 7 months
Input Date: 10/18/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Audrei Cortez
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: [

Administrative Assistant 2

Description:
PDS Tech is seeking an Administrative Assistant for an open position in Roosevelt, Wa. 
In your role, you will: 

  • The Field Administrative Support (FAS) person will assist the site with warehouse logistics and administrative tasks.
  • This includes organizing and maintaining a warehouse, shipping and receiving, documentation review, electronic and physical filing, reporting, compliance paperwork, tool and parts management, facility organization and paperwork reviews. 

  • This position will require forklift operations and prior experience is preferred but not required.
  • This is an ideal position for someone who can operate independently and is a highly motivated self-starter that has an attention to detail.
  • Significant computer work with e-mail, Microsoft Office and SAP is part of the normal working environment.
  • Candidates must be able to work on their feet for long periods and regularly lift 50 pounds.

 
Job Number: 1610048928
Job Location: Roosevelt, WA
Per Diem: No
Duration: 11 months
Input Date: 10/18/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Israel Ireneo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: [

Aeronautical Engineer - Level 3 - KY - C

Description:
Chipton-Ross is seeking an Aeronautical Engineer - Level 3 for an opening in Lexington, KY.

RESPONSIBILITIES:
Evaluates coupled solar radiation, airflow and conduction heat transfer by both classic methods and finite element analysis. Knowledge of a wide range of electronics equipment and cooling methods. Experienced in idealizing internal air flow and heat conduction paths into simplified representations to achieve efficient analysis. Determines appropriate boundary conditions, film coefficients and convection coefficients and is familiar with industry standard documents governing temperature requirements. Documents methods, calculations and results comprehensively and clearly, using industry standard substantiation format.

REQUIRED EXPERIENCE:
Coupled Flow Field and Thermal/ANSYS/BSME

PREFERRED EXPERIENCE:
FEMAP/Microsoft office suite/Stress Analysis Background

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
5/40, 1st Shift

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 163729
Job Location: Lexington, KY
Rate: $55 to $75.00 DOE
Duration: 9 Months
Input Date: 10/17/2017
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Aeronautical Engineer – Level 3

Description:
Aeronautical Engineer – Level 3

Location: Lexington, KY
Rate: $55.00 - $75.00/HR
Duration: 6+ month contract
Shift: 1st Shift
Overtime: Exempt

**Candidates must have an Active Secret Clearance or have had one with the last 2 years**

Description
- Evaluates coupled solar radiation, airflow and conduction heat transfer by both classic methods and finite element analysis.
- Knowledge of a wide range of electronics equipment and cooling methods.
- Experienced in idealizing internal air flow and heat conduction paths into simplified representations to achieve efficient analysis.
- Determines appropriate boundary conditions, film coefficients and convection coefficients and is familiar with industry standard documents governing temperature requirements.
- Documents methods, calculations and results comprehensively and clearly, using industry standard substantiation format.

Skill/Experience/Education
Mandatory:
- 11+ years of experience with heat transfer
- Coupled Flow Field and Thermal/ANSYS/BSME

Desired:
FEMAP/Microsoft office suite/Stress Analysis Background
 
Job Number: 7494
Job Location: Lexington, KY
Rate: $55.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 6+ mos
Input Date: 10/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Advance Process Engineers - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring Aerospace Advance Process Engineers for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Advance Process Engineer shall evaluate processes and configure Aerospace assembly and sub-assembly systems and develop best practices within the production process.

Job Duties:

• Evaluate and improve on processes in assembly and sub-assembly systems
• Develop innovative solutions
• Work with equipment designers and manufacturing officers to develop a cost-effective and working production process
• Undertake scoping study level trade-off evaluations of process alternatives
• Assist in the preparation of project feasibility level capital and operating costs
• Assist in the development of plans, methods, design, materials handling, manpower requirements, cost analysis and other areas as appropriate
• Review design, management and interpretation of project studies, aimed at understanding the project scope, requirements and performance outcomes
• Search and assimilate information generated by others with the aim of solving relevant project issues
• Provide specialist technical input into team project work
• Provide input and evaluation into recovery estimates
• Act as the process lead on studies and projects
• Develop or bring forward, as appropriate, industry best practices and new technologies
• Oversee the development and maintenance of long and short term processing plans, processing designs and input into project development efforts as appropriate
• Prepare and review project proposals, studies and technical reports
• Oversee the cost effective, safe and timely completion of projects that meet or exceed expectations
• Apply a sound basic knowledge of safety, environment and related issues during the processing of projects
• Has the authority and obligation to stop production in case unsafe working conditions are observed
• Has the obligation to notify the Director IO and the President for Safety related matters requiring immediate attention

Qualifications:

• Bachelor of Applied Science or graduate degree in Engineering or related field
• A minimum of five (5) years’ of related Aerospace experience

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40014
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/07/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace BOM Specialists - Everett, WA

Description:
STS AeroStaff Services is hiring Aerospace BOM Specialists for open positions in Everett, Washington.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Develop and maintain Bill of Materials (BOM) of released engineering drawings for details, assemblies, and installations in order to support the aircraft reconfiguration. Duties will include management of tasks independently with assignments provided by Engineering Procurement Supervisor or Engineering Management.

Job Duties:

• Creates Item Masters & maintains base data
• Creates, maintains and revises base Bill of Material (BOM’s)
• Revises “Scheduled” production BOM(s) & routes as required
• Creates and maintains Top-down-BOM structures
• Process Flam EAMR(s) for Flammability Testing
• Create and maintains Service Bulletin BOM(s)
• Audits and analyzes base BOM(s) and cards as required for accuracy
• Coordinates activities with Production Control, Program Management, Design Engineering, Purchasing, Manufacturing Engineering, Stores/Shipping
• Coordinate part number roll decisions with Engineering
• Processes / incorporates engineering changes and demand changes to base cards
• Coordinates changes by communicating revisions to Purchasing, Stores and Prod Ctrl groups
• Coordinates with Program Manager to meet production order demand release requirements as required
• Researches and analyzes part history
• Communicates and coordinates engineering stop work notices
• Creates and maintains Standard Work Instructions for BOM creation and maintenance
• DBT participation on assigned projects
• Primary Focal for Manufacturing Planning / BOM group on assigned projects
• Performs other duties as assigned

Qualifications:

• High school degree or equivalency required
• A minimum of 3 years’ support experience required based on the duties listed
• Advanced knowledge of Bills of Materials and Planning Structures
• Advanced ability in reading engineering drawings & interpreting process/material specs
• Experience with engineering drawings, i.e. being able to read engineering drawings, parts list and drawing notes
• Customer Focus – solicits and uses feedback for continuous improvement
• Strives for quality and excellence
• Accountability – takes a no excuses approach to making things happen
• Takes responsibility for own actions and results
• Teamwork – Actively assists to move the team toward the completion of goals
• Collaboration - Establishes collaborative relationships to achieve objectives
• Creativity and Innovation - Develops fresh ideas that provide solutions to all types of workplace challenges
• Decision Making and Judgement- Makes timely informed decisions that take into account the facts
• Aerospace or Accounting background
• Ability to work well independently and cross-functionally across multiple organizations and disciplines
• Strong communication, time-management, and problem-solving skills
• Proficient knowledge of MS Office Products (Excel, Word, Project, etc.)
• Establish collaborative relationships to achieve objectives
• Communication – Excellent interpersonal and communication (written and verbal) skills
• Show positive attitude and volunteer for various assignments in order to complete program on schedule and budget
• Self-motivated and multi-tasker

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39991
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Design Engineers - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring Aerospace Design Engineers for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• To design tooling, fixtures or equipment per customer specifications to meet the intended need
• Develop advanced planning on tooling concepts
• Support manufacturing during build phases and resolve any non-conformances in a timely manner
• Utilize CAD software to perform FEA analysis on designs, write FEA reports and provide design feedback to design engineers
• To support and provide feedback on customer RFQ’s
• Assume other accountabilities and duties as assigned by the Leadership

Qualifications:

• Strong CAD (Catia, NX, etc.) design abilities including 3D modeling and complex assemblies
• Experience with and/or knowledge of Tooling Design and Manufacturing, Controls knowledge a plus
• Experience with and/or knowledge of Automated Production Systems a plus
• Ability to effectively prioritize and execute tasks in a high-pressure environment including following on tools during the fabrication, build installation and commissioning phases of the project
• Ability and willingness to travel to any of the customer and Company’s work locations in North America, Europe and Asia, as required by Management
• Must be willing to work extended hours, when necessary, including overtime, weekends and holidays and on night shift, as project and customer demands dictate
• Excellent interpersonal, written and verbal communication skills
• Ability to work with others, including peers and personnel in other departments
• Eligibility for clearance under the Canadian Controlled Goods and the American ITAR requirements
• At minimum a Bachelor of Science in Mechanical or Aerospace Engineering, Masters of Science in an engineering discipline preferred
• PE license preferred, must show ability to attain license
• Minimum 5 years’ experience performing stress analysis utilizing FEA software (Abaqus, Algor, NASTRAN/PASTRAN, etc.) and performing hand calculations

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39985
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineers (Level 3) - Atlanta, GA

Description:
STS AeroStaff Services is currently hiring Aerospace Engineers (Level 3) for open positions in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Support Engineering project development for a wide variety of Avionics, Structures, and Systems Engineering initiatives
• Supporting shop, hangar and line maintenance customers in accomplishing Engineering projects
• Leaving the office environment and going to hangar, line, shop, planning and other support groups to gain details necessary to complete accurate project
• Providing aircraft engineering support to a variety of internal customers and outside suppliers to support Engineering solutions for long term safety/reliability/cost effectiveness
• Reviewing, recommending, and implementing manufacturers' service bulletins and other correspondence to affected fleets
• Reviewing data and recommending and implementing changes as required to improve aircraft reliability
• This position reports to the Engineering Solutions Manager, and work demand will vary based on current departmental needs and priorities among multiple managers
• Develops both strategic and tactical plans that create a safety-conscious environment resulting in employee safety and well-being

Qualifications:

• A bachelor's degree is required
• Prefer candidates have: Bachelor's Degree in Engineering with 3-5 years’ aviation related experience, Master's Degree in Engineering with 1-3 years’ aviation related experience, Ph.D. Degree in Engineering, or 5-9 years’ in a technical aviation related discipline with at least 2-3 years’ in an aviation engineering organization
• Project Management skills or certifications a plus
• Recent college graduates with a degree in Engineering or an aviation-related field will be considered
• Previous airline, military, OEM, or MRO experience with commercial aircraft is strongly preferred
• Familiarity with airline flight operations and support systems, FAR 121 dispatch regulations, computers and programming is desirable
• Works under minimal direction. Independently determines and develops approach to solutions
• Only complex/difficult projects are reviewed upon completion for adequacy in meeting objectives
• Majority of projects require no review
• Solid understanding and wide application of technical principle, theories and concepts as they pertain to his/her job function
• General knowledge of engineering related disciplines outside his/her job function
• Provide feasible alternatives to solve difficult technical problems over a wide scope
• Solutions are imaginative and practical
• SCEPTRE knowledge preferred
• Familiarity with Boeing and Airbus products is favorable
• Project Management experience desirable

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40083
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/13/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Expeditors - Cape Canaveral, FL

Description:
STS AeroStaff Services is hiring Aerospace Expeditors for open positions in Cape Canaveral, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Expedite parts to meet developed estimated completion dates
• Expedite parts through other departments to break any hold factor in support of late part delivery
• Expedite material from the receiving dock, stock rooms and buyers in support of late part delivery and deliver to using department
• Maintain weekly visibility on part shortages
• Support of Data Integrity in Company MRP system
• Control of Non-conforming Material / Return to Inventory / Stock Purge
• Expedite Off-site processing

Basic Qualifications:

• High school diploma is required
• Minimum 3 years’ of experience in a production or manufacturing environment
• Minimum 3 years’ of experience working with an MRP system

Preferred Skills and Experience:

• Experience in aerospace, automotive, or consumer electronics manufacturing
• Minimum 3 years’ of production control experience is required

Additional Requirements:

• Lifting up to 30lbs., standing, climbing, bending, grasping, sitting, pulling, pushing stooping, stretching and carrying are generally required to perform the functions of this position
• Must be available to work all shifts, overtime, and weekends, as required

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39932
Job Location: Cape Canaveral, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 08/30/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aerospace Instrumentation Technician

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.The strategic purpose of the Test and Evaluation Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

Responsibilities:

Reading and creating wire diagrams.
Selecting or auditing appropriate sensors given engineering requirements.
Working with customers and engineers to define appropriate instrumentation requirements.
Designing instrument installations and creating installation instructions.
Instrumentation installation.
Evaluating instrumentation installations for function and safety.
Troubleshooting instrumentation problems.
Data acquisition system operation.
Documenting data system practices and procedures.
Generating instructions and operation manuals.
Developing sensor calibration and functional test procedures.
Maintaining calibration records.
Domestic and international travel may be required.
Desired Qualifications:

3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to work interdependently, and lead small groups.
CATIA V experience beneficial.
Experience with data processing and analysis beneficial.
Computer programming experience beneficial.
Proficient in working with Microsoft Office applications including Word and Excel.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: mcalderon@velocity-cs.com
Website: www.velocity-cs.com

Aircraft Painter (35) - OR

Description:
Chipton-Ross is seeking 35 Marine Painters for openings in Portland, OR.

RESPONSIBILITIES:
Looking for Marine painters with experience working on Aircraft or Large Boats.

REQUIRED EXPERIENCE:
- 2-3 years experience
- Electrostatic Spray Gun
- High Pressure Spray Gun
- Mini Jet Spray Gun
- Marine, Auto body or Industrial Painters preferably with HVLP (High Volume Low Pressure) air-fed electro-static paint sprayers.
- At least 2+ years of Industrial and/or Commercial marine/transportation painting experience is highly desired.


ADDITIONAL EXPERIENCE:
Refurbishing experience a big plus.

EDUCATION:
High School Diploma

VARIABLE SHIFT
Shifts are 4- 12 hour shifts.
4 days on, 4 days off

ADDITIONAL:

May pay as low as $15 for an entry level position and if candidate doesn't test as well as expected.
Position may be temp to perm or direct placement, depending on client's needs a candidate's testing.
Client will expect testing for all candidates that they are interested in and show that they have an interest in committing to this opportunity. Client will coordinate and pay for round trip flight to Portland and also give one day of per diem. Skills tests are on Wed, Thurs, Fri. If skills test is passed, client will determine if candidate is Jr. or Sr, and make an offer based on results of testing.

May go up to $22/hour for 2-3 yrs expereince with a STRONG skilll set. Client hopes to move those hired to a Senior Painting position within 3 months, and Senior positions there pay $25.

Shifts are 4- 12 hour shifts. 4 days on, 4 days off with a 10-15% shift differential available.


 
Job Number: 162173
Job Location: Portland, OR
Rate: $22 to $25.00 DOE
Duration: PERM
Input Date: 10/17/2017
Firm Name: CHIPTON ROSS
Attention: Leila Morrow
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmorrow@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airport Staffing & Flight Scheduling Analysts - Seattle, WA

Description:
STS AeroStaff Services is hiring Airport Staffing & Flight Scheduling Analysts in Seattle, Washington.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The contractor will be working a key project to change the FA Open Time Trading rules in JCTE and Crew Exchange, third party vendor systems developed by Jeppesen. The contractor will fulfill two roles on the project, the Project Manager and the Business Analyst. As the project manager, they will document and control scope, track progress, escalate issues, and report progress to stakeholders. As a business analyst, they will review the contract language to be programmed, work with the SMEs to capture requirements in the form of User Stories, capture test scenarios, and manage the user acceptance testing.

Job Responsibilities:

• Review Collective Bargaining Agreement (CBA) language and rules
• Review Prior Business Requirements document as a reference
• Schedule and facilitate Requirements sessions
• Capture Requirements and Rules in the form of User Stories and Acceptance Criteria with SMEs and QA analyst
• Capture Test scenarios for each User Story with SMEs and QA analyst
• Work with SMEs and Vendor developers on tracking and answering questions
• Create a User Acceptance Test Plan
• Schedule and Facilitate User Acceptance testing
• Track defects reported from UAT and triage with SMEs
• Provide assistance to Support team as needed
• Weekly status report
• Communicate to all stakeholders
• Creation of project charter
• Create project plan and timeline with tasks
• Work with project sponsor on Change Management and Training Plan
• Work with project sponsor on creation of support team for go-live

Qualifications:

• Documenting detailed Business Requirements and Rules in the form of User Stories and Acceptance Criteria with SMEs and QA analysts
• Documenting various Testing Scenarios based on User Stories and input from SMEs
• Ability to read and comprehend Collective Bargaining Agreement language and rules
• Creating Test Plans with SME input
• Organize User Acceptance Testing and track progress on testing
• Excellent communication and active listening skills
• Ability to quickly learn new concepts, rules, and systems
• General PM – scoping management, risk management, communication management, change management, cost management, quality management
• Implementation of vendor IT systems
• Ability to fill dual roles on project BA and PM for multiple projects
• Organized

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39840
Job Location: Seattle, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/01/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Airworthiness Inspector Sr

Description:
PDS is seeking a  Airworthiness Inspector Sr  for an open position in Savannah, GA.

The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. 

Essential Functions:
  1. 1. Responsible for all quality control inspections on aircraft/components in the Repair Station.
  2. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
  3. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting.
  4. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components.
  5. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
  6. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
  7. 7. Ensures aircraft/components are airworthy prior to any flight activities.
  8. 8. Mentors technicians on effective documentation. 


Additional Functions:

  • Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, airworthiness Directive status, and Service Bulletin status.
  • Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
  • Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example.
  • Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures.
  • Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft.
  • May perform ODA functions as assigned.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
  • Performs other duties as assigned. 


For Additional Information on this Opening Please Contact
Kellye Roberts
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com

Education and Experience Requirements:



  • High School graduate/GED. Airframe and Powerplant License required.
  • Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.

Other Requirements:

  • Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
  • Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required.
  • Familiar with FAA certification approval processes.
  • Strong written and verbal communication skills. Must be able to effectively prioritize tasks.
  • Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.


Unique Skills:



  • Must be able to support AAP on extended or alternate shifts and weekends.


For Additional Information on this Opening Please Contact
Kellye Roberts
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com

 
Job Number: 1710067773
Job Location: Savannah, GA
Duration: 6 months
Input Date: 10/18/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Kellye Roberts
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: [

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Analog Design Engineer

Description:
Job Summary:

Lead the development of science instruments for space flight missions; work with scientists and engineers across technical boundaries to develop instrument concept; spearhead new technology development of detectors and electronics in laboratory vacuum systems; travel to the facilities of other instrument team members to participate in design meetings; oversee the process of writing requirement and specification documents; lead the design of flight electronics to meet high-reliability requirements that are necessary for NASA missions; direct the development of prototype experiments in the laboratory; review procedures and oversee comprehensive hardware verification tests; organize and deliver presentations to NASA representatives in formal design reviews; provide support for instrument qualification tests and calibration, including field tests at customer facilities (NASA centers, government labs); participate in commissioning and operation of science instrument after it has been launched into space.

Education/Experience:
Requires a BS degree in Electrical Engineering
Advanced degree (MSEE or equivalent) is desirable/preferred.
Requires 10-15 years of related experience to include strong analog design and analysis skills, a digital design background, and hardware/software troubleshooting.
Must possess the ability to lead and mentor less experienced engineering staff, lead/direct the development of prototype experiments, scientific instruments and spearhead new technology developments; experience with scientific instruments associated electronics and detector systems preferred with the ability to write requirement and specification documents, procedures and conduct comprehensive hardware verification tests; must possess strong communication and presentation skills to deliver presentations to internal as well as external customers (NASA, ESA, commercial). A valid/clear driver's license is required.
This position requires passing the test.

Special Considerations:
Must be a U.S. citizen or Permanent Resident due to ITAR work in section
 
Job Location: San Antonio, TX
Rate: Open
Per Diem: Yes, Split
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 09/13/2017
Firm Name: AMERICAN CONTRACT GROUP
Address: 50 HIGH ST STE 46
City, State: NORTH ANDOVER, MA 01845
Phone: 978/984-5581
800 Phone: 877/723-9087
Fax Phone: 978/208-8246
Website: www.americancontractgroup.com

Apprentice Avionics Harness Technician - (6) - CA

Description:
Chipton-Ross is seeking a Apprentice Avionics Harness Technician for an opening in Hawthorne, CA.

RESPONSIBILITIES:
As an Avionics Harness Technician you will be responsible for fabricating and assembling high quality/high reliability wire harnesses and electro-mechanical assemblies under the instruction of a seasoned Technician. This is a great opportunity to learn more about Avionics for individuals with a strong mechanical aptitude and a passion for working with their hands.
Read, interpret and work from drawings, controlled documentation and processes. Self-monitor work progress against area benchmarks to achieve on time product delivery. Record work performed on shop floor management system (ERP). Perform verification of flight hardware and document results in a clear, precise and complete manner. Assist with area efficiency improvement projects.


REQUIRED EXPERIENCE:
High School Diploma or Equivalent. At least 5 years experience using basic mechanical and/or electronics hand tools. Associates Degree or Technical Certification. Experience working and collaborating in a team environment. Experience preferred in fast-paced production environment with flight quality hardware. Excellent communication (written and verbal) and teamwork skills. Excellent concentration and attention to detail with outstanding work efficiency and accuracy. Participation in STEM (Science, Technology, Engineering and Mathematics) related activities, clubs or groups. Computer literate.
Must be willing to work 1st shift, 7:00 AM 5:30 PM. Must be willing to work overtime and weekends as needed. Must be able to lift and carry up to 40 pounds. Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching are generally required to perform the functions of this position.

EDUCATION:
High School Diploma

WORK HOURS:
-5/50, 1st Shift: 7:00AM - 5:00PM
 
Job Number: 161967
Job Location: Hawthorne, CA
Rate: $DOE
Duration: 3 Months
Input Date: 10/17/2017
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

Assembler - Level 3

Description:
PDS Tech is seeking an Assembler for an open position in Acton, MA

In your role, you will:

    • Ability to accept various assignments in a non-structured, erratic production environment. 

    • Will be reporting to the Production Manager. 

    • Assembles fabricated parts at floor stations. 

    • Tests and calibrates parts and mechanisms to meet tolerances and product specifications. 

    • Uses hand tools and power tools to assemble units according to product specifications. 

    • Identifies units that fail tests or tolerance levels and repairs as necessary. 
    • HS Diploma or GED required 

    • Steel toed shoes required 



    Basic Qualifications: 

    • 1 year of experience in electro-mechanical assembly. 



    Additional Qualifications: 

    • Ability to function as part of a team and contribute to its overall success. 

    • High energy effort to complete tasks, flexibility and capability of working in a constantly changing department. 

    • Basic understanding of analog and digital PCB’s. 

    • Familiar with personal computers and their basic operation. 
     
    Job Number: 1610061012
    Job Location: Acton, MA
    Duration: 6 months
    Input Date: 10/18/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Lea Salmo
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: [

    Assembler - Level 4

    Description:
    PDS Tech is seeking an Assembler for an open position in Clearwater, FL 

    In your role, you will:

      The Assembler / Wire personnel must perform duties to ensure effective wiring and assembly of standard and non standard products
      As our ideal candidate, you will meet the following requirements: 
      • Basic Qualifications: 

        - Due to government regulations, must be a US Citizen 

        - High School Diploma or GED 

        - 5-7 years of Assembler experience (i.e. soldering, wiring & electronics).
        •   Wire harness soldering experience with extensive use under microscope. 

      • IPC-7711/7721 IPC Certification Training 

        IPC/WHMA-A-620 Certification Training 



        Additional Qualifications: 

        - Working knowledge of computers strongly desired 

        - Ability to work with “fine pitch” components & detail chassis wiring. 

        - Position requires the completion of 40hr solder & ESD training certification class. 

        - Experience in Space & Defense manufacturing environment. 

        - Individual is expected to have good verbal and written communications skills. 

        - Candidate must be able to work in a self directed, teaming & continuous improvement environment. 

        - Self-directed teaming skills 

        - Good written & verbal communication skills 

        - Continuous Improvement skills (6-Sigma); greenbelt is a plus 

        - Good Team Player 



       
       
      Job Number: 1610059883
      Job Location: Clearwater, FL
      Duration: 8 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Lea Salmo
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: [

      Assembler - 2nd shift

      Description:
      PDS Tech, Inc. is seeking an Electro-Mechanical Assembler for an open position in Lincolnton, NC.
       

       
      Job Number: 1710064335
      Job Location: Lincolnton, NC
      Duration: 6 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Roger Greco
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: [

      Assembler - Level 3 (2) - AR

      Description:
      Chipton-Ross is seeking an Assembler - Level 3 (2) for an opening in Camden, AR.

      RESPONSIBILITIES:
      Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions. Must have CRC test results attached to the resume,

      REQUIRED EXPERIENCE:
      CRC-Silver, High School Diploma and 1 year manufacturing / production experience

      EDUCATION:
      Accredited High School Diploma/GED

      WORK HOURS:
      4/10, 1st Shift, Full-Time


       
      Job Number: 165137
      Job Location: Camden, AR
      Rate: Up to $12.00 DOE
      Duration: 3 Months
      Input Date: 10/17/2017
      Firm Name: CHIPTON ROSS
      Attention: Kristie Hardage
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: knguyen@chiptonross.com
      Website: www.chiptonross.com

      Assembler Level - 1

      Description:
      PDS Tech, Inc. is seeking a candidate for the Assembler Level -1 for an open position located in Niagara Falls NY.
      Job Description: 
      • Performs a variety of operations to assemble precision electromechanical products such as accelerometers, gyros.
      • Performs tasks such as drilling, reaming, burnishing, and tapping; uses precision measuring instruments to ensure conformance to specified tolerances; disassembles precision assemblies and corrects malfunctions.
      • May assemble and modifies pre-production precision units for engineering personnel as directed.
      • May monitor and verify quality in accordance with statistical process or other control procedures

      Mandatory:
      • High school degree or equivalent
      • Two (2) years experience in using a Microscope to assemble miniature part and or assemblies.
      • Experience working in an ISO/clean room/instrument or medical device manufacturing environment.
      • High level of manual dexterity and attention to detail a must
      • Ability to follow procedures, drawings, manufacturing instructions and specifications, documenting work, controlled documents.
      • Ability to identify product issues.
      • IPC-A-610 and/or IPC J-STD-001 certification is desireable.
      • Previous experience in miniature precision devices is desirable.
      • Quality control experience desirable.
      • Good oral communication skills and ability to work in a team environment. 
      • Electro-Mechanical Assembler = Accelerometer Assembler  


      Desired:

      • High school degree or equivalent, and Two (2) years experience in miniature part (microscope) assembly
      • Experience working in an ISO/clean room/instrument or medical device manufacturing environment.
      • High level of manual dexterity and attention to detail a must.
      • Ability to follow procedures, drawings, manufacturing instructions and specifications, documenting work, controlled documents.
      • Ability to identify product issues
      • IPC-A-610 and/or IPC J-STD-001 certification is desireable.
      • Previous experience in miniature precision devices is desirable.
      • Quality control experience desirable.
      • Good oral communication skills and ability to work in a team environment.

       
      Job Number: 1710066563
      Job Location: Niagara Falls, NY
      Duration: 12 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Earl Sawyer
      Address: 2154 N CENTER ST STE 405D
      City, State: NORTH CHARLESTON, SC 29406
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: [

      Assembler Sr

      Description:
      PDS Tech, Inc. is seeking a candidate for the Assembler Sr. position located in Marion, MA.
      Job Description: 
      • Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
      • Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
      • Makes continuity checks on work in process and completed.
      • May conduct quality inspections on processing line in accordance with quality specifications.
      • May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions. 



       
      Mandatory Skills:
      Requirements:

      • Must have thorough understanding of IPC-A-610 Acceptability of Electronic Assemblies, and J-STD-001 Soldering Standard.
      • Perform assemby/soldering operations under a microscope on circuit card assemblies to IPC-A-610 and J-Std-001 standards as well as customer documentation.
      • Perform soldering of small gauge wires to circuit boards.
      • Requires ability to work in fast paced environment.
      • Ability to read and interpret production documents and drawings
      • Good communication skills - communicate with lead operator and other members of the assembly team.
      • Basic computer skills.
      • Soldering  =  Soldering of small gauge wires (30 awg) to printed circuit boards.



      Desired Skills:

      • Certification to or the ability to be certified to IPC-A-610 and J-STD-001 guidelines. 



       
       
      Job Number: 1710072624
      Job Location: Marion, MA
      Duration: 15 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Earl Sawyer
      Address: 2154 N CENTER ST STE 405D
      City, State: NORTH CHARLESTON, SC 29406
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: [

      Assembler Sr-MA

      Description:
      Chipton-Ross is seeking an Assembler Sr in Marion, MA.

      Description
      Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

      Skill/Experience/Education
      Mandatory:
      Requirements: Must have thorough understanding of IPC-A-610 Acceptability of Electronic Assemblies, and J-STD-001 Soldering Standard. Perform assemby/soldering operations under a microscope on circuit card assemblies to IPC-A-610 and J-Std-001 standards as well as customer documentation. Perform soldering of small gauge wires to circuit boards. Requires ability to work in fast paced environment. Ability to read and interpret production documents and drawings Good communication skills - communicate with lead operator and other members of the assembly team. Basic computer skills.

      Desired:
      Certification to or the ability to be certified to IPC-A-610 and J-STD-001 guidelines.
       
      Job Number: 164911
      Job Location: Marion, MA
      Rate: $15 to $17.00 DOE
      Duration: 3 months
      Input Date: 10/17/2017
      Firm Name: CHIPTON ROSS
      Attention: Kristie Hardage
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: knguyen@chiptonross.com
      Website: www.chiptonross.com

      Assembler: Electrical

      Description:
      PDS Tech, Inc is seeking a candidate for the Assembler- Electrical position located in Ponoma, CA.
      ESSENTIAL FUNCTIONS 

      • Operates tools and equipment common to the mechanical trade (e.g. hand & power tools). 
      • Processes work orders (with the use of computers, scanning devices, etc.) in adherence to the production schedule or expedited orders. 
      • Scans in and out of work orders (with the use of computers, scanning devices, etc.) in adherence to the production schedule or expedited orders. 
      • Reads and interprets documents associated with the completion of mechanical assembly assignments (e.g. blue prints, bill of materials, one line diagrams, etc.). 
      • Gathers parts and accessories required in the assembly process. 
      • Assembles fabricated parts to create unit assemblies (Switchboards & Lighting Panels) or subassemblies. 
      • Fastens component parts on cubicles or frames, subassemblies, or unit assemblies. 
      • Connects cables and basic wires. 
      • Verifies that units meet specifications, tolerances, and customer order requirements. 
      • Disassembles units to adjust or replace parts. 
      • Marks unit assemblies with identifying information and/or attaches identifying tags. 
      • Reports non-conforming items (e.g. parts, schematics, blue prints, etc.) 
      • Prepares finished units for shipping (e.g. packing, sealing, labeling, etc.) 
      • Cleans and maintains equipment and work area to ensure proper functioning and safe working conditions. 
      • Accesses and utilizes various documents, with the use of computers, associated with the manufacture of products in assembly (e.g. Quality and Safety Documents, Operating Instructions, etc.) 
      • Performs other work as directed by Supervision. 
      JOB SPECIFICATIONS 

      • Working Conditions: Job involves typically working indoors, being assigned to any of the different shifts, occasionally lifting heavy materials, wearing common safety equipment (e.g. cut resistant gloves and sleeves, safety shoes, safety glasses, ear plugs, etc.) being exposed to loud noises and the possibility of bumps, cuts, scrapes, and strains. 

      • Capabilities: The following are behaviors essential to being successful in this job. 

       Safety Advocacy: Ability to promote and ensure a safe work environment; identifies, communicates, and eliminates hazards encountered during regular course of work. 

       Quality Orientation: Focused on meeting or exceeding the level of excellence of products, services, and work activities–measured against pre-set standards; able to identify flaws and take corrective action. 

       Cooperation: Willingly assists others by offering guidance, sharing knowledge, teaching skills, or directly performing a task in order to help out. Puts team objectives ahead of personal interests. 

       Adaptability: Willingly accepts organizational changes and responds to changes with appropriate urgency and actions. Reacts to anger, frustration, and disappointment constructively (i.e. finding humor in situations; finding solutions to problems, using relaxation techniques; etc.). 

       Analytical Thinking: The ability to tackle a problem or task using a logical and systematic approach. 

       Spatial Reasoning: Ability to think in three dimensions; being able to mentally generate, rotate, and transform visual images.

      MINIMUM QUALIFICATIONS 

      • Education: High School diploma or equivalent. 
      • Experience: None 
      • Specialized Training: None 
      • Knowledge: None 
      • Skills: Basic computer skills, and use of basic mechanical/measuring tools. 
      • Abilities: 
       Must be able to speak, read, write, and comprehend the English language 
       Must be able to reach, grasp, lift 50 lbs , and push/pull/slide heavy material 
       Must be able to make coordinated movements of the hands and arms to grasp and move objects. 
       Must be able to stoop, bend, squat, crawl, and climb 
      • Other: Must be at least 18 years of age. 
       
      Job Number: 1710072838
      Job Location: Pomona, CA
      Duration: 3 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Israel Ireneo
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: [

      Assembler/Integrator

      Description:
      PDS Tech is seeking a candidate for the Assembler/Integrator position located in Madison, AL.  
      The successful candidate will be required to perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies.
      Additional duties will include printing labels required for unit identification, serialization, revision level, and cage code information.
      Experience with Bartender label printing software (or similar), Intermec and Rayjet laser printers desired.
      Some knowledge of Microsoft Office Suite programs. 
      May conduct quality inspections on the production line in accordance with quality specifications.
      May disassemble, modify, rework, reassemble, and test production or prototype assemblies and subassemblies according to specifications including bills of material and work instructions. Experience working from drawings and diagrams. 

      Basic Requirements:
      • Must be a team player
      • Strong interpersonal skills.
      • Must be able to work in a fast paced environment.
      • Must have strong communication skills 

      *# of Years Experience 2 years additional education and/or experience 
        
      *Educational Requirements:  High School 
        
      *Please specify any Other Details/Requirements for this position: US CITIZENSHIP IS REQUIRED 
       
      Job Number: 1710067532
      Job Location: Madison, AL
      Duration: 12 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Enrique Perez
      Address: 3201 CHERRY RIDGE DR STE A103
      City, State: SAN ANTONIO, TX 78230-4824
      Phone: 210/524-1496
      800 Phone: 866/570-1503
      Email: cecjsanantonio@pdstech.com
      Website: [

      Assembler/Tester - Camarillo, CA

      Description:
      PDS TECH, INC is currently looking for an Assembly/Tester for our client in Camarillo, CA.

      Job Description:
      Accurately and efficiently assembles/tests a variety of moderate to semi-complex products to achieve customer quality and on-time delivery schedules. May perform lockwiring and final detailing functions. Works on products that contain mostly mechanical and some electrical components, single and some dual hydraulic systems, and multiple part families. Actively contributes to lean initiatives to increase productivity and reduce costs. Receives limited supervisory guidance.Should have a good knowledge of hydraulic systems and components. Aviation or Aerospace background/experience is highly preferred.

      Job Duties:
      1. Five or more years direct industry related experience in assembly/test in a high-technology manufacturing environment.
      2. Demonstrate understanding of semi-complex products involving electronics, dual systems, and multiple part families.
      3. Demonstrate product and process knowledge by applying it to newly learned techniques.
      4. Able to research problems and develop solutions, incorporating multiple variables, to successfully repair product to serviceable condition.
      5. Able to work with limited supervisory guidance. Familiar with and able to set up most test fixtures.
      6. Able to adapt to procedures, techniques, and/or processes to meet special needs on varied assignments.
      7. Proficient in reading and understanding blueprints, route sheets, and test specifications. Perform semi-complex mathematical calculations, as well as demonstrate effective verbal, written, and basic computer skills.
      8. Strong mechanical reasoning, as well as hydraulic and/or electrical background required. Measurement conversion and fluids theory knowledge required for test applications. Leakage, flow, friction, and pressure knowledge required.
      9. Able to implement and effectively apply lean initiatives.
      10. Serve as a resource to other team members and assist in training efforts. Possess effective interpersonal communication skills, as well as the abilityh to work in a team environment on research and solution development.
      11. Able to interpret reports and use standard business software applications. Able to use employee self-service to access on-line information and use specialized automated systems (i.e. PMR, TORS, e-mail).
      12. May require specialized certification specific to division requirements (i.e. certified operator, FAA repair license, soldering certification).
      13. May require specialized certification specific to division requirements (i.e. certified operator, FAA repair license, soldering certification).
      14. Ability to effectively demonstrate team member competencies and participate in goal setting, performance feedback, and self-development activities.
      PDS Tech, Inc. is proud to bean Equal Opportunity Employer -Minorities/Female/Disabled/Veteran (EOE M/F/D/V)Founded in 1977, PDS Tech, Inc. is one of the nation's premier specialty staffing firms with 31 offices nationwide.We offer a full range of benefits including:- Health insurance- Paid holidays- Weekly payroll- Immediate 401(k) eligibility- Completion bonuses- Training Please note availability of benefits may vary by position. PDS specializes in Engineering and IT arenas including Aerospace, Defense, Electronics, Telecommunications, Automotive, and Energy just to name a few. Our reputation, track record, and years of continuous growth reflect the commitment to quality that our employees and clients experience first-hand. For more information about PDS, please check our website, www.pdstech.com $$$ PDS pays for referrals! $$$We pay thousands each month in referral bonuses!Contact a recruiter for details.To find a branch near you, look at our Branch Locator This position may require you to submit to and pass a drug test and/or background check. If this is a hands-on position, you may also be required to pass a safety and productivity examination. PDS Tech, Inc. will comply with all applicable federal and state laws governing the use of such background checks and drug tests.
       
      Job Number: 1710068895
      Job Location: Camarillo, CA
      Duration: 0 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Karla Pelonis
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: [

      Assembler/Tester A - FL

      Description:
      Chipton-Ross is seeking an Assembler/Test A for an opening in Jacksonville, Fl.

      RESPONSIBILITIES:
      1. Performs moderately complex assembly/test functions utilizing mechanical skills, hand and power tools, mechanical/electronic tools, test equipment, assembly fixtures, and inspection measurement equipment in a manufacturing environment.
      2. Records test results on data forms using moderately complex electrical equipment and flow measurement devices. May use X-Y recorders, oscilloscopes, transducers, and other related equipment.
      3. Identifies malfunctions disclosed by test data and reworks as instructed.
      4. Interprets blueprints, engineering orders, assembly routes, test specifications, service bulletins, customer requirements, and quality directives.
      5. Produces and inspects assemblies that conform to product specifications. Assembles, tests, and/or solders to customer and/or industry standards.
      6. Performs touch-up or full surface painting of parts with finishing materials such as paint, lacquer, glaze, etc. Mixes paint and cleans parts.
      7. Actively participates in lean initiatives by identifying and providing suggestions on areas for improvement.
      8. May assist in training less experienced team members.
      9. Observes all safety rules and maintains a foreign object damage (FOD) free work area.
      10. Ensures all equipment is calibrated in accordance with calibration schedule.
      11. May perform other related responsibilities.

      REQUIRED EXPERIENCE:
      To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.
      Two or more years industry related experience in assembly/test in a manufacturing environment.
      Demonstrate product and process knowledge by applying it to newly learned techniques.
      Able to select appropriate procedures, techniques, tools, and equipment.
      Proficient in reading and understanding blueprints, route sheets, and test specifications. Perform basic mathematical calculations, as well as demonstrate effective verbal, written, and basic computer skills.
      Possess strong mechanical reasoning.
      Able to implement and effectively apply lean initiatives.
      Possess effective interpersonal communication skills, as well as the ability to work in a team environment.
      Able to interpret reports and use standard business software applications. Able to use employee self-service to access on-line information and use specialized automated systems (i.e. PMR, TORS, e-mail).
      May require soldering certification per customer requirements.
      Ability to effectively demonstrate team member competencies and participate in goal setting, performance feedback, and
      self-development activities.

      EDUCATION:
      Accredited High School Diploma/GED

      WORK HOURS:
      2nd Shift, Full-Time
       
      Job Number: 165173
      Job Location: Jacksonville, FL
      Rate: $13.75 to $15.44 DOE
      Duration: 4 Months
      Input Date: 10/17/2017
      Firm Name: CHIPTON ROSS
      Attention: Nate Karlin
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: nkarlin@chiptonross.com
      Website: www.chiptonross.com

      Assembler- MA

      Description:
      Chipton Ross is seeking an Assembler in Marion, MA

      Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

      Mandatory:
      Ability to read/comprehend MEIs, PWIs and manufacturing prints supplied and assemble various products meeting IPC 610 standards and customer requirements.

      Desired:
      Soldering experience, Ability to read/comprehend documentation written in English Good communication skills. Ability to learn and follow written instructions.
       
      Job Number: 160418
      Job Location: Marion, MA
      Rate: $15 to $17.00 DOE
      Duration: 1 year
      Input Date: 10/17/2017
      Firm Name: CHIPTON ROSS
      Attention: Johnnie Barrientos
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: jbarrientos@chiptonross.com
      Website: www.chiptonross.com

      Assembly Tech - Entry Level Aerospace

      Description:
      Our client in Orangeburg, SC is seeking Assembly Techs:
      In this role you will follow general instructions, 

      Preferred Skills:

      •    Aerospace assembly, 
      •   Manufacturing assembly or similar functions
      •    Automotive / repair mechanics
      •    Military 
      •    Carpenter 
      •    Construction: Electrician, welders, plumbers

      •    Proven longevity in the work environment
      •    Integrity and honesty
      •    Self motivated
      •    Wants the team to achieve and progress, and progress themselves as an individual
      •    Team work
      •    Ability to follow instructions given by Team-Lead and Supervisor
      •    Ability to follow (sometimes complex) written work instructions
      •    Discipline to follow established processes and procedures
      •    Timely, punctual
      •    Good verbal communication

      •    High performing work team based
      •    Manufacturing/Production environment where performance is measured
      •    Had accountability for personal performance
      •    Adapt quickly to changes 
      •    Customer focused and goal driven

       
      Qualifications / Experience / Skills 

      The following skills are required: demonstrated ability to read and follow written and verbal work instructions; capable of performing a wide range of physical activities, some requiring fine manual dexterity; demonstrated ability to recognize discrepancies in materials or processes required. Ability to work from sketches and use simple measuring instruments, such as tape measures or micrometers, required. Position requires knowledge of basic shop math, including addition, subtraction, decimals and fractions. Must be willing to work in a repetitive production environment with concern for meeting cost, quality and schedule requirements. Must be willing to work both as a team player and independently. 


       
       
      Job Number: 1710068663
      Job Location: Orangeburg, SC
      Duration: 12 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Earl Sawyer
      Address: 2154 N CENTER ST STE 405D
      City, State: NORTH CHARLESTON, SC 29406
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: [

      Assembly Tech II

      Description:
      PDS Tech is currently needing Assembly Technicians swing shift in Chandler, AZ.  Please reach out to Jonas Lindner at:  480.212.0845 or jlindner@pdstech.com

      Performs a wide variety of electronic or electro-mechanical assembly operations on assemblies or sub-assemblies.  Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering and cable harnessing on assembly units.  Makes setups and adjustments holding tolerances to blueprint specs.
      Performs specific back-end semiconductor mfg. functions in the production of semiconductor devices.  Operates various equipment in performing functions such as wafer scribe and break, die sort, die attach, lead bonding and seal, test, or mark and pack.
      • Build mechanical assemblies and sub-assembles
      • Must be able to read pneumatic and electrical schematics
      • Responsible for helium leak testing, cabling, module and sub-assembly testing
      • Operates hand and power tools to complete assemblies
      • Reads and interprets work instructions to ensure accuracy of work performed.
      • Interacts with mgmt. and team members to encourage effective communications on production floor
      • Performs standard testing and minor troubleshooting
      • Ensures quality standards are met throughout all steps of the assembly process
      • Attendance is essential
      • Knowledge of operating hand tools, portable power tools and bench tools
      • Strong attention to detail, quality focused and willing to learn
      • Excellent communication skills
      • Basic computer skills and the ability to operate computer terminals
      • 3 plus years experience in mfg./cleanroom environment
      • Performs other duties as required.


       

       
      Job Number: 1710069740
      Job Location: Chandler, AZ
      Duration: 6 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Jonas Lindner
      Address: 1839 S ALMA SCHOOL RD STE 250
      City, State: MESA, AZ 85210
      Phone: 480/929-9922
      800 Phone: 800/657-0997
      Fax Phone: 480/929-9779
      Email: cecjphoenix@pdstech.com
      Website: [

      AutoCAD Electric Module Designer

      Description:
      Immediate needs, call our national recruiters
       
      Input Date: 05/15/2017
      Firm Name: ADDITIONAL CONTRACT SERVICES
      Attention: Adam, Sean, Brendan, or Jennifer
      Address: 85 RANGEWAY RD BLDG 1 STE 2
      City, State: NORTH BILLERICA, MA 01862
      800 Phone: 800/661-8272
      Email: acs@acsnatl.com
      Website: www.acsnatl.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Aviation Cargo Care Representatives - Dallas, TX

      Description:
      STS AeroStaff Services is hiring Aviation Cargo Care Representatives for open positions in Dallas, Texas.

      Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

      Job Duties:

      • Assist Customers with all cargo inquiries received through the Cargo Customer Care Center
      • Support the objectives of Cargo Management, Ground Operations
      • Follows the Basic Principles of Leadership and leads by example in all management practices
      • Entertain and qualify all calls to the Cargo Customer Care Center (CCCC), answering Customer inquiries on cargo policies and procedures
      • Process booking requests for human remains shipments
      • Process and respond to cargo claims and refund requests, both verbal and written
      • Assist Customers and Cargo Agents with tracing cargo shipments
      • Process new cargo account applications
      • Support and assist Cargo Management with operational projects
      • Provide support to the Area Managers with sales/marketing projects and Customer Relations as needed

      Qualifications:

      • High School diploma or equivalency required
      • College course work or degree would be an asset
      • Experience Experience handling inbound telephone Customer Service and/or sales preferred
      • Knowledge of air cargo policies and procedures would be an asset
      • Ability to perform physical activities such as lifting, standing, sitting, driving, pulling, pushing, squatting, hearing, climbing, walking, kneeling, reaching, crawling writing, and speaking
      • Ability to type and/or use a computer keyboard with sufficient speed and accuracy to meet demands of job
      • Must be aware of hazardous situations and be able to handle emergencies as needed
      • Must be able to comply with Company attendance standards as described in established guidelines
      • Possess excellent organizational skills; including file maintenance and reporting
      • Ability to solve problems by asking fact finding questions and utilizing multiple data sources
      • Must be able to handle multiple situations simultaneously and difficult/demanding Customer Service issues
      • Must communicate effectively by telephone
      • Strong written communications skills
      • Written communication (including email) must be professional in tone and audience appropriate
      • Must be proficient in the use of current software, i.e. Microsoft Office (e.g., Outlook, Excel, Word, Access, and PowerPoint), Cargo point of sale system, Salesforce, etc.
      • Must be able to utilize multiple applications simultaneously
      • Must meet confidentiality expectations as to confidential, proprietary and sensitive Company information
      • Must be available to work a variety of shifts
      • Must be able to travel occasionally and work extended hours on an as needed basis
      • Must maintain a well-groomed appearance
      • Must be a U.S. citizen or have authorization to work in the United States as described by the Immigration Reform act of 1986

      Benefits:

      STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

      We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

      Thanks for taking the time, and we look forward to hearing from you soon.
       
      Job Number: 39984
      Job Location: Dallas, TX
      Rate: DOE
      Per Diem: No
      Overtime: Possible
      Duration: Temp
      Start Date: ASAP
      Input Date: 09/06/2017
      Firm Name: STS AEROSTAFF SERVICES
      Attention: STS AeroStaff Services
      Address: 2000 NE JENSEN BEACH BLVD
      City, State: JENSEN BEACH, FL 34957
      800 Phone: 877/707-5767
      Fax Phone: 877/707-5767
      Website: www.stsaviationgroup.com

      Aviation Mechanics - Clearance

      Description:
      Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

      Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
      Several Openings For:
      • General Mechanic
      • Electrical
      • Structures
      • Avionics Tech
      • Quality Inspection
      • Supply Chain Specialist


      Great Opportunity for Ex-military/Exiting Military/ and Veterans
      Previous military experience a plus!


       
      Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
      Required- Minimum of 5 years' experience working on 747 platform.
      Tools: no tools required
      Location: San Antonio, Texas

      ***Current Security Top Secret Clearance required
      US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

      **submittal must reference Job ID number 1710063637

      Camille Zunker- czunker@pdstech.com
       
      Job Number: 1710063637
      Job Location: San Antonio, TX
      Duration: 12 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Camille Zunker
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: [

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Aviation Program Managers - Elk Grove Village, IL

      Description:
      STS AeroStaff Services is hiring Aviation Program Managers for open positions in Elk Grove Village, Illinois.

      Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

      Qualifications:

      • A new graduate with an engineering or program management degree is highly preferred; however, a candidate with no degree is acceptable as long as they have 5-10 years’ of program management experience
      • Aviation experience is preferred, but is not necessary
      • Automotive or customer service experience is also a plus

      Benefits:

      STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

      We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

      Thanks for taking the time, and we look forward to hearing from you soon.
       
      Job Number: 39962
      Job Location: Elk Grove Village, IL
      Rate: DOE
      Per Diem: No
      Overtime: Possible
      Duration: Temp
      Start Date: ASAP
      Input Date: 09/01/2017
      Firm Name: STS AEROSTAFF SERVICES
      Attention: STS AeroStaff Services
      Address: 2000 NE JENSEN BEACH BLVD
      City, State: JENSEN BEACH, FL 34957
      800 Phone: 877/707-5767
      Fax Phone: 877/707-5767
      Website: www.stsaviationgroup.com

      Avionics / Elec Techs

      Description:

       PDS TECH INC is currently looking for 4 Avionics Techs for our Long Beach customer.
      2 on 1st shift and 2 on 2nd shift

      If you are interested and available, please call 1-800-234-8644 x 20210
      Send resume to: KPelonis@pdstech.com


      Education and Experience Requirements:


      High School graduate/GED. A & P license, FCC license or NCATT certification preferred.
      Four (4) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.


      Position Purpose:



      Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements. 

      Principal Duties and Responsibilities:

      Essential Functions:
      1. Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
      2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
      3. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
      4. Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
      5. Performs and complies with engineering changes and modifications as required.
      6. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
      7. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
      8. Tests and maintains test equipment, electronic systems, and components.
      9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
      10. Adapt to sudden schedule changes. 

      Additional Functions:
      1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
      2. Performs other duties as assigned. 

      Other Requirements:
      1. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
      2. Ability to read and interpret basic blueprints and schematic diagrams.
      3. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
      4. Must be able to climb stairs and ladders, work in confined areas and lift up to 80 pounds.




       



       



       
      Job Number: 1710067142
      Job Location: Long Beach, CA
      Per Diem: No
      Duration: 6 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Karla Pelonis
      Address: 3130 S HARBOR BLVD STE 100
      City, State: SANTA ANA, CA 92704
      Phone: 714/540-7900
      800 Phone: 800/234-8644
      Fax Phone: 714/540-8092
      Email: cecjcostamesa@pdstech.com
      Website: [

      Avionics Electrical Engineer - Custom Engineering

      Description:
      Avionics Electrical Engineering Consultant- Custom Engineering

      Location: Savannah, GA
      Rate: $61.00 - $68.00/HR
      Duration: Long Term contract
      Shift: First

      Unique Skills:
      -Must be able to substantiate experience at creating engineering design/compliance data that's complaint to FAA/Company ODA requirements.
      - Looking for a seasoned/experienced electrical engineer/designer/integrator with Company experience on GIV, GV, G450, G550 and if possible G650.
      - Having GII and GIII and MidCabin experience is a bonus.
      - The person needs to be proficient in AutoCad and as a bonus either CATIA and or SmarTeam.
      - Mainly AutoCad and of course experience using Microsoft Word/Excel.
      - Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing.
      - Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

      Education:
      Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

      Position Purpose:
      Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services.

      Principal Duties and Responsibilities: Essential Functions:
      1. Contributes to planning, developing and coordinating of important engineering projects
      2. Provides specialized technical assistance to team members
      3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
      4. Determines and develops own approach to solutions within schedule and cost objectives
      5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
      6. Acts as liaison with representatives outside of the assigned group/area

      Additional Functions:
      1. Actively works to improve daily processes and ensures all work meets customer requirements
      2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
      3. Performs other duties as assigned
      Other Requirements:
      1. Advanced degree in engineering related field preferred
      2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
       
      Job Number: 7314
      Job Location: Savannah, GA
      Rate: 61-68
      Per Diem: Yes
      Overtime: Possible
      Duration: LT
      Start Date: ASAP
      Input Date: 10/12/2017
      Firm Name: INCONEN CORPORATION
      Attention: Rex Calkins
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Email: rex@inconen.com
      Website: www.inconen.com

      Avionics Electrical Engineers

      Description:
      Jets experience a plus
       
      Job Location: Midwest
      Input Date: 01/14/2015
      Firm Name: ADVANCED TECHNOLOGY
      Address: 15 KENNETH MINER DR
      City, State: WRENTHAM, MA 02093
      800 Phone: 877/334-7700
      Fax Phone: 877/335-7700
      Email: jmac@advancedtechno.com
      Website: www.advancedtechno.com

      Avionics Electrical Engineers

      Description:
      Jets experience a plus
       
      Job Location: Southeast
      Input Date: 01/14/2015
      Firm Name: ADVANCED TECHNOLOGY
      Address: 15 KENNETH MINER DR
      City, State: WRENTHAM, MA 02093
      800 Phone: 877/334-7700
      Fax Phone: 877/335-7700
      Email: jmac@advancedtechno.com
      Website: www.advancedtechno.com

      Avionics Engineer

      Description:
      A leading Aerospace company, located in Canoga Park, CA, is seeking a Principal Engineer - Avionics, for a 8+ month contract role.

      ** Candidates must be U.S. Citizens **
      ** Permanent residents are NOT eligible for this role **
      ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

      -Support Electro-Mechanical Packaging of complex electrical/electronic assemblies required.
      -Extensive experience in Creo design required.
      -Candidate must have strong GD&T and tolerance analysis skills required.
      -Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.
      -Experience in design of cables and harnesses for applications for Aerospace products.
      -Proficiency in use of Creo PDM/Link and Windchill.
      -Proficiency in generating drawings is required.

      Skills:
      -Electronic-Mechanical Packaging Design a must.
      -ProE/Creo CAD design a must.
      -GD&T a must.
      -Electronic packaging design for harsh environments.
      -Design of cables and harnesses.
      -Drawing Generation.
      -Tolerance Stack-up analysis.
      -Creo PDM/Link and Windchill.

      Education:
      -BSME with 10 years of experience or 15 + years of equivalent experience.
       
      Job Number: 12241
      Job Location: Canoga Park, CA
      Rate: Open
      Per Diem: Yes
      Overtime: Possible
      Duration: 8 Months+
      Start Date: October
      Input Date: 10/11/2017
      Firm Name: LOGIN CONSULTING SERVICES
      Attention: Tali Lerea
      Address: 300 CONTINENTAL BLVD STE 530
      City, State: EL SEGUNDO, CA 90245-5067
      Phone: 310/607-9091
      Fax Phone: 310/607-9818
      Email: tali.lerea@loginconsult.com
      Website: www.loginconsult.com

      Avionics Installer

      Description:
      Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems.
       
      Essential Functions:
      1. Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings.
      2. Maintains required logs and records.
      3. Completes tasks within allotted time frame.
      4. Ensures that work accomplished meets applicable regulatory requirements and customer specifications.
      5. Checks all work and ensures a defective free assembly prior to final inspection.
      6. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
      7. Maintains a neat and orderly work area.
       
      Additional Functions:
      1. Properly care for and maintain shop equipment and tools as assigned by Supervisor.
      2. Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.)
      3. Performs other duties as assigned.
       
      Education and Experience Requirements:
      High School diploma/GED. Knowledge of applicable regulatory requirements and customer specifications.
      Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience.
      Ability to read and interpret basic blueprints and schematic diagrams.
      2nd Shift
       
       
      Job Number: 1710073184
      Job Location: Westfield, MA
      Duration: 12 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Tyler Belisle
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: [

      Avionics Installer- 1st shift

      Description:





      PDS TECH INC is currently looking for Avionics Installers for our customer in Long Beach

      If you are interested and available, please call Karla Pelonis (800) 234-8644 x 20210 and forwarded your updated resume to kpelonis@pdstech.com

       



      Avionics installation or maintenance history required. Computer literate required. 



      Education and Experience Requirements:



      High School diploma/GED. Knowledge of applicable regulatory requirements and customer specifications. Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience. Ability to read and interpret basic blueprints and schematic diagrams.


      Position Purpose:



      Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems. 

      Principal Duties and Responsibilities:

      Essential Functions:
      1. Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. 2. Maintains required logs and records.
      3. Completes tasks within allotted time frame.
      4. Ensures that work accomplished meets applicable regulatory requirements and customer specifications.
      5. Checks all work and ensures a defective free assembly prior to final inspection.
      6. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
      7. Maintains a neat and orderly work area. 

      Additional Functions:
      1. Properly care for and maintain shop equipment and tools as assigned by Supervisor.
      2. Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.)
      3. Performs other duties as assigned. 

      Other Requirements:
      1. Strong written and verbal skills required.
      2. Computer skills and general software knowledge necessary.





       





       
      Job Number: 1710072938
      Job Location: Long Beach, CA
      Per Diem: Yes
      Duration: 12 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Karla Pelonis
      Address: 3130 S HARBOR BLVD STE 100
      City, State: SANTA ANA, CA 92704
      Phone: 714/540-7900
      800 Phone: 800/234-8644
      Fax Phone: 714/540-8092
      Email: cecjcostamesa@pdstech.com
      Website: [

      Avionics Installer- 1st shift

      Description:





      PDS TECH INC is currently looking for Avionics Installers for our customer in Long Beach

      If you are interested and available, please call Karla Pelonis (800) 234-8644 x 20210 and forwarded your updated resume to kpelonis@pdstech.com

       



      Avionics installation or maintenance history required. Computer literate required. 



      Education and Experience Requirements:



      High School diploma/GED. Knowledge of applicable regulatory requirements and customer specifications. Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience. Ability to read and interpret basic blueprints and schematic diagrams.


      Position Purpose:



      Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems. 

      Principal Duties and Responsibilities:

      Essential Functions:
      1. Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. 2. Maintains required logs and records.
      3. Completes tasks within allotted time frame.
      4. Ensures that work accomplished meets applicable regulatory requirements and customer specifications.
      5. Checks all work and ensures a defective free assembly prior to final inspection.
      6. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
      7. Maintains a neat and orderly work area. 

      Additional Functions:
      1. Properly care for and maintain shop equipment and tools as assigned by Supervisor.
      2. Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.)
      3. Performs other duties as assigned. 

      Other Requirements:
      1. Strong written and verbal skills required.
      2. Computer skills and general software knowledge necessary.





       





       
      Job Number: 1710072940
      Job Location: Long Beach, CA
      Per Diem: Yes
      Duration: 12 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Karla Pelonis
      Address: 3130 S HARBOR BLVD STE 100
      City, State: SANTA ANA, CA 92704
      Phone: 714/540-7900
      800 Phone: 800/234-8644
      Fax Phone: 714/540-8092
      Email: cecjcostamesa@pdstech.com
      Website: [

      Avionics Installer- 2nd shift

      Description:





      PDS TECH INC is currently looking for Avionics Installers for our customer in Long Beach

      If you are interested and available, please call Karla Pelonis (800) 234-8644 x 20210 and forwarded your updated resume to kpelonis@pdstech.com

       



      Avionics installation or maintenance history required. Computer literate required. 



      Education and Experience Requirements:



      High School diploma/GED. Knowledge of applicable regulatory requirements and customer specifications. Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience. Ability to read and interpret basic blueprints and schematic diagrams.


      Position Purpose:



      Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems. 

      Principal Duties and Responsibilities:

      Essential Functions:
      1. Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. 2. Maintains required logs and records.
      3. Completes tasks within allotted time frame.
      4. Ensures that work accomplished meets applicable regulatory requirements and customer specifications.
      5. Checks all work and ensures a defective free assembly prior to final inspection.
      6. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
      7. Maintains a neat and orderly work area. 

      Additional Functions:
      1. Properly care for and maintain shop equipment and tools as assigned by Supervisor.
      2. Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.)
      3. Performs other duties as assigned. 

      Other Requirements:
      1. Strong written and verbal skills required.
      2. Computer skills and general software knowledge necessary.





       





       
      Job Number: 1710073124
      Job Location: Long Beach, CA
      Per Diem: Yes
      Duration: 12 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Karla Pelonis
      Address: 3130 S HARBOR BLVD STE 100
      City, State: SANTA ANA, CA 92704
      Phone: 714/540-7900
      800 Phone: 800/234-8644
      Fax Phone: 714/540-8092
      Email: cecjcostamesa@pdstech.com
      Website: [

      Avionics System Engineer

      Description:
      PDS Tech, Inc. is seeking a Avionics System Engineer for an open position in Huntsville, AL.
      ​Job Description
      • Seeking candidates to support Combat Helicopter Program in the area of advanced navigation systems and their integration into the avionics architecture.
      • Tasks include all aspects of avionics integration, including requirements analysis and allocation, supplier technical management, system/subsystem design, integration, and verification.

      Education / Certifications
      • BS in Electrical or Computer Engineering or equivalent

      Experience / Qualifications

      • Familiarity with modern navigation/avionics architectures, components, algorithm’s and system engineering processes is required.
      • DOORS and MS Office proficiency required.
      • Strong communication and presentation skills are a plus.

       
      Job Number: 1710063269
      Job Location: Huntsville, AL
      Per Diem: No
      Duration: 22 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Ryan Bushey
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: [

      Avionics Systems Integration - 10+

      Description:
      PDS Tech, Inc. is seeking a candidate for the Avionics Systems Integration - 10+ position located in Shelton, CT. 

      Purpose:

      Seeking an Avionics Engineer for System Integration Test activities, in CT. 

      Responsibilities will include: 
      1. System Integration and Test of new cockpit with legacy components on a Blackhawk platform. 
      2. Develop engineering test procedures in a DOORs environment and generate reports for test activates. 
      3. Primary technical responsibilities will be development of detailed test plans and reports of avionics systems including controls and displays, communication systems, navigation systems, and mission avionics systems for S-70i aircraft. 
       
      Experience/Qualifications: 
      • BS in Aeronautical, Electrical Engineering with 6 to 10 years’ Avionics experience. 
      • Should be familiar with Avionic 1553 bus architecture and test equipment and troubleshooting of system level problems. 
      • Knowledge of Mil Standards, Digital Busses architecture (ARINC, 1553) 
      • Previous experience with of Avionics and Electrical Ground Flight Test Activities a plus. 
      • Working expertise in the design, analysis, development and operation of aircraft systems and avionics sub-systems. 
      • Knowledge of Test Methods and Lab Procedures 

      Skills Required:
      • Strong verbal and written communication skills essential. 
      • Strong Computer skills: Word, Excel, Powerpoint, Visio, DOORS 
      • Must be effective working in highly collaborative team environment to accomplish program objectives.
       
      Job Number: 1710071924
      Job Location: Shelton, CT
      Duration: 12 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Ryan Bushey
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: [

      Avionics/Electrical Technician

      Description:
      Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.

      Essential Functions:
      1. Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
      2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
      3. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
      4. Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
      5. Performs and complies with engineering changes and modifications as required.
      6. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
      7. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
      8. Tests and maintains test equipment, electronic systems, and components.
      9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
      10. Adapt to sudden schedule changes.
       
      Education and Experience Requirements:
      High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Four (4) year’s experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.
       
      1. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
      2. Ability to read and interpret basic blueprints and schematic diagrams.
      3. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
      4. Must be able to climb stairs and ladders, work in confined areas and lift up to 80 pounds.
       
       
      Job Number: 1710073185
      Job Location: Westfield, MA
      Duration: 12 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Tyler Belisle
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: [

      Avionics/Electrical Technician

      Description:
      Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.

      Essential Functions:
      1. Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
      2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
      3. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
      4. Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
      5. Performs and complies with engineering changes and modifications as required.
      6. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
      7. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
      8. Tests and maintains test equipment, electronic systems, and components.
      9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
      10. Adapt to sudden schedule changes.
       
      Education and Experience Requirements:
      High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Four (4) year’s experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.
       
      1. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
      2. Ability to read and interpret basic blueprints and schematic diagrams.
      3. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
      4. Must be able to climb stairs and ladders, work in confined areas and lift up to 80 pounds.
       
       
      Job Number: 1710073186
      Job Location: Westfield, MA
      Duration: 12 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Tyler Belisle
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: [

      Avionics/Electrical Engineer

      Description:
      Unique Skills:
      Looking for a seasoned/experienced electrical engineer/designer/integrator. The person needs to be proficient in AutoCAD and as a bonus either CATIA and or SmarTeam. Mainly AutoCad and of course experience using Microsoft Word/Excel. Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing. Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

      Education/Experience:
      Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

      Principal Duties and Responsibilities:
      1. Contributes to planning, developing and coordinating of important engineering projects
      2. Provides specialized technical assistance to team members
      3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
      4. Determines and develops own approach to solutions within schedule and cost objectives
      5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
      6. Acts as liaison with representatives outside of the assigned group/area
       
      Job Number: 24-168
      Job Location: Savannah, GA
      Rate: $61-$68/hr.
      Per Diem: YES
      Overtime: YES
      Duration: 1 YR+
      Start Date: ASAP
      Input Date: 10/16/2017
      Firm Name: PRECISION PERSONNEL INC
      Attention: Matt
      Address: 600 CLEVELAND ST STE 700
      City, State: CLEARWATER, FL 33755
      Phone: 727/449-0600
      800 Phone: 877/600-2333
      Fax Phone: 727/449-0627
      Email: matt@precisionpersonnel.com
      Website: www.precisionpersonnel.com

      Avionics/Electrical Engineer

      Description:
      -Holiday Pay
      -Longevity Pay
      -Medical/Dental Insurance
      -Weekly Pay
      -Identity Theft Protection
      -401(k) Immediate Enrollment
      -Direct Deposit

      PDS is an equal opportunity employer
      EOE M/F/D/V (minorities, female, disabled, veterans)
       
      Job Location: Savannah, GA
      Input Date: 09/26/2017
      Firm Name: PDS TECHNICAL SERVICES
      Address: 3922 COCONUT PALM DR STE 100
      City, State: TAMPA, FL 33601
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: www.pdstech.com

      Buyer - FL

      Description:
      Chipton-Ross is seeking a Buyer for an opening in Naples, FL.

      RESPONSIBILITIES:
      Obtains the best quality, service, and value for products and services through effective bidding, negotiation, and supplier management. Identifies manufacturing needs, identifies and selects suppliers, initiates purchase orders, and arranges for delivery. Provides parts, equipment, services, and materials of limited scope and complexity.

      REQUIRED EXPERIENCE:
      2. May have limited prior industry experience or worked with direction in student internship programs. 3. Certificate in Purchasing Management (CPM) preferred.4. Knowledge of key purchasing and negotiating methods, principles and concepts and general business operations. 5. General knowledge of legal and regulatory requirements related to procurement. 6. Basic understanding of continuous improvement techniques and methods. 7. Ability to use standard business application software and specialized purchasing and/or materials systems (e.g. electronic data interface (EDI) or manufacturing resource planning (MRP) systems). 8. Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, and percentages. 9. Ability to research and analyze data and develop recommendations or resolve problems by drawing on internal information and referring to prior decisions. 10. Ability to work with only general work direction and instructions regarding the scope of assignments and determine priority and order of assignments. 11. Ability to read, analyze, and interpret financial reports. 11. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. 12. Ability to define problems, collect data, establish facts, and draw valid conclusions. 13. Ability to negotiate effectively to obtain the best price and terms. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.

      EDUCATION:
      Bachelors degree (BA) in Business Administration or related field (MUST), Professional entry level position.

      WORK HOURS:
      1st Shift, Full-Time

       
      Job Number: 165172
      Job Location: Naples, FL
      Rate: $20.42 to $27.81 DOE
      Duration: 5 Months
      Input Date: 10/17/2017
      Firm Name: CHIPTON ROSS
      Attention: Silmese Graves
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: sgraves@chiptonross.com
      Website: www.chiptonross.com

      Buyer - NH

      Description:
      Chipton-Ross is seeking a Buyer II for an opening in Londonderry, NH.

      RESPONSIBILITIES:
      Issue requests for quotes/proposals (RFQ/RFP) and select best source consistent with cost, quality and delivery requirements for electronic, mechanical, optical and/or electro-mechanical components.
      Able to evaluate bid responses, negotiate price, terms and conditions, delivery schedules, and place purchase orders in accordance with division policies, procedures and government regulations.
      Monitor MRP action and exception messages daily, place orders, and align supply and demand daily.
      Track material status to production need date. Follow through on action items to align schedule and provide clear and open communication with planners and materials managers.
      Analyze atypical material requirements versus inventory and order status, determine criticality, coordinate with suppliers to develop plans, and make recommendations to management
      Work with suppliers on rejected material and claims resulting from purchase order changes or terminations.
      Act as liaison between suppliers and involved departments to resolve procurement related problems.
      Monitor supplier performance and take corrective action as necessary.
      Maintain accurate and consistent master data
      Support bids and proposals and NPI processes by target pricing initiatives
      Verifies and approves payment of invoices for orders received as required with accounts payable driving resolution of issues.
      Deliver cost savings, payment channel compliance and supplier optimization
      Assess change needs, impacts, and stakeholder management activities and support change management integration activities
      Interacts with senior internal and external personnel on significant matters often requiring coordination between organizations.
      Develop and maintain supplier profiles.
      Investigate and Develop negotiation plans
      Develop alternate sources while reducing overall vendor base.
      Compiles information to keep informed on price trends and manufacturing processes.
      Studies market trends and interviews suppliers. Make recommendations to management of suppliers to be placed on the approved vendor list
      Conduct Supply risk mitigation analysis and develop contingency plans
      Always perform Procurement activities with the highest ethical standards consistent with company policies and requirements.
      Ensures small business program is utilized and guidelines followed
      Ensure complete flow-down of customer contractual requirements

      REQUIRED EXPERIENCE:
      A minimum 5-7 years relevant procurement experience,
      Strong working knowledge of procurement, planning and scheduling fundamentals.
      Must have good working knowledge of MRPII system. ERP experience in Materials/Procurement modules
      Above average knowledge of Microsoft Office software.
      Experience purchasing electronic, mechanical, optical and electro-mechanical components.
      Experience with developing RFQ/RFP, negotiations, contracts, preparing financial analysis, material acquisition, expediting and coordination of shipping arrangements.
      Experience with managing multiple commodity areas and tasks effectively in a fast paced work environment.
      Knowledge of ITAR restrictions, and FAR/DFAR requirements a plus
      Scope information:

      PREFERRED EXPERIENCE:
      CPM or APICS certification preferred


      EDUCATION:
      BA or BS in Materials Management, Procurement, Business Administration, Operations Planning or a related field, preferred.

      WORK HOURS:
      9/80, 1st Shift, Full-Time
       
      Job Number: 164665
      Job Location: Londonderry, NH
      Rate: $25 to $35.00 DOE
      Duration: 4 Months
      Input Date: 10/17/2017
      Firm Name: CHIPTON ROSS
      Attention: LaVada Pulley
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: lpulley@chiptonross.com
      Website: www.chiptonross.com

      C++ Software Engineer 2- Secret, Melborune FL 32901

      Description:
      PDS Tech, Inc. is seeking an Engineer Software 2- Secret  in Melbourne, FL 32901.  Contact Elisabeth Laspe for details. 314-669-8020 elaspe@pdstech.com
      9 month contract with possible extensions.  Must have an Active Secret Clearance to qualify. 
      Position Summary / Responsibilities

      • Design/implement/test/integrate Test Software Simulation Systems. 
      • Analyze and interpret formal and informal customer requirements and generate corresponding lower level requirements that acknowledge technical, schedule, and cost constraints

      Active DoD Secret Security Clearance is required to start. Secret Clearance must have been established or reviewed within the last 6 years. Contingent upon the ability to obtain access to Special Programs is required
      • Experience using  C++ across multiple platforms (Windows, Linux).
      • Active Secret Clearance required.
      • Must have experience programming one or more of the following HW interfaces: 429, 1553, 1394, Ethernet, RS-485.
      • Experience programming one of the following communication protocols: DDS, UDP, TCP/IP, DIS, ActiveMQ
      • Level 2: 2 Years with Bachelors in Science Electrical Engineering, Physics, Math or Computer Engineering. 0 Years with Masters

      All positions require an active DoD Secret clearance

      Languages: Python Experience with Hardware-in-the-loop testing, design of complex systems. Requirements development
       
      Job Number: 1710070793
      Job Location: Melbourne, FL
      Duration: 9 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Elisabeth Laspe
      Address: 1215 FERN RIDGE PKWY STE 231
      City, State: ST LOUIS, MO 63141
      Phone: 314/628-9143
      800 Phone: 800/472-3737
      Fax Phone: 314/628-9485
      Email: cecjstlouis@pdstech.com
      Website: [

      C14 Junior EE Firmware Engineer

      Description:
      PDS Tech is seeking a candidate for the C14 Junior EE Firmware Engineer position located in McClellan, CA.  
      The chosen candidate will be responsible for developing, implementing, analyzing, and testing of certain aspects of electrical components and systems.
      He/she will be familiar with standard concepts, practices, and procedures within the engineering field, rely on experience and guidance from senior staff to plan and accomplish goals, support existing products, and develop a range of new products.
      This position may require some business related travel. 
      Responsibilities: 
      • Provide engineering support for product development and current production. 
      • Assist with circuit card assembly (CCA) schematics, block diagrams, parts lists, and testing of complex multilayer printed circuit boards (PCB). 
      • Perform testing of products using high-speed oscilloscopes, signal generators, signal analyzers, Matlab, FPGA debugging tools, and “home grown” test sets. 
      • Perform FPGA coding and documentation.  FPGA product families utilized are Xilinx Kintex7, Virtex7, Zynq, and Altera Stratix. 
      • Release engineering and manufacturing documentation in order to support projects. 
      • Support production and manufacturing activities, including planning and materials procurement.
      Required Qualifications: 
      • Bachelor of Science degree in Electrical Engineering with 1-5 years of experience. 
      • Knowledge of schematic capture tool(s). 
      • Knowledge of FPGA development, simulation, and verification tool(s) including MATLab, Simulink. 
      • Knowledge of Microprocessors, Programmable Logic, Real-Time Systems, and Analog and Digital Designs. 
      • Proficiency in Microsoft Office. 
      • Demonstrated problem solving skills. 
      • Excellent communication skills, both oral and written. 
        
      Preferred Qualifications: 
      • Masters degree in Electrical Engineering 
      • Knowledge of Mentor Graphics circuit card development tools. Expedition Enterprise a plus. 
      • Knowledge of Xilinx FPGA development tools. Vivado a plus. 
      • Knowledge of digital signal processing and software defined radios a plus. 
      • Low-level software experience to facilitate hardware/software integration of FPGA designs. 
      • Experience in defense systems designs a plus. 
      • Currently active security clearance a plus. 
       
      Job Number: 1710061827
      Job Location: Mcclellan, CA
      Duration: 12 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Jason Andrzejewski
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: [

      CATIA Instructor

      Description:
      PDS is seeking an CATIA Instructor for an open position in Savannah, GA

      In your role, you will:


      Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of the Client's products and services 

      Essential Functions:
      1. Formal Classroom instruction experience required for CATIA and PDM.
      2. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
      3. Is consulted extensively by associates and others as a recognized authority within the field
      4. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
      5. Approach to problem solving balances technical product, cost and schedule
      6. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
      7. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative 


      Additional Functions:

      • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
      • Performs other duties as assigned 


      Education and Experience Requirements:


      Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

      Other Requirements:

      • Formal Classroom instruction experience required for CATIA and PDM.
      • Advanced degree in engineering, or related curriculum preferred
      • The level of technical skill and abilities appropriate for this grade will be established by each discipline


      Unique Skills:



      CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.

      POC:  Clyde (813)426-9917 or ccallwood@pdstech.com 
       


       
      Job Number: 1610056929
      Job Location: Savannah, GA
      Duration: 6 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Clyde Callwood
      Address: 3922 COCONUT PALM DR STE 100
      City, State: TAMPA, FL 33601
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: [

      CNC Machinist / Grinder- 3rd shift

      Description:
      PDS Tech Inc. is looking for a CNC Machinist to work on 3rd shift for our client in Torrance, CA.          

      GENERAL FUNCTION:
      Must be able to set up and operate manual and CNC milling and grinding machines as well as CNC lathes. Capable of holding tight tolerances associated with the machining of precision parts. Must be able to read blueprints and interrupt written work instructions. Prior experience using multi-axis CNC Mills or Lathes required ie.)Okumas. 

      Performs set-ups and all other machinist level functions related to I.D. and O.D. CNC grinding and is expected to run 2 machines simultaneously.
      Responsible for the inspection of all work performed; detecting unusual conditions, defective materials, and deviate parts; and recognizing errors in blueprints and operation sheets. Grind a wide variety of complex parts having either interim grooving, numerous steps, tapers, unusual contours, to extremely close tolerances and/or a high degree of finish on two or more of the following type grinders: cylindrical, internal, or surface.
      Perform own set-ups to include chucking and aligning of parts having irregular shapes.
      Select proper wheels, speeds, reeds, and operating sequence. Dress wheels for form, taper, steps, straight and unusual forms. Inspect own work using sine bars, air gages, diatest, V-blocks, profilometers angle plates, and electronic gaging equipment.

      ESSENTIAL JOB FUNCTIONS:
      Employee will work in a machine cell where he/she will be responsible for the operation of 1 or more machines at a time, depending on production needs.
      Employee must be comfortable multi-tasking in a fast paced environment.
       
      TECHNICAL REQUIREMENTS
      EXPERIENCE:
      • Candidate must possess 3 years of Machinist experience (NOT SIMPLY MACHINE OPERATION).
      • Must be comfortable setting-up and troubleshooting mechanical issues with CNC Machines. Must also be comfortable using various measuring equipment such as Micrometers, Calipers, and Dial Bore Gauges. 
      • **Gear and/or grind experience a plus**

      High School diploma or GED required. 
      Machining trade a plus.
       
      Job Number: 1710068647
      Job Location: Torrance, CA
      Duration: 12 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Karla Pelonis
      Address: 3130 S HARBOR BLVD STE 100
      City, State: SANTA ANA, CA 92704
      Phone: 714/540-7900
      800 Phone: 800/234-8644
      Fax Phone: 714/540-8092
      Email: cecjcostamesa@pdstech.com
      Website: [

      Cabin Realization Engineer

      Description:
      PDS Tech is seeking a Cabin Realization Engineer for an open position in Mobile, AL
       
      • Responsible for engineering development per the aircraft modification project plan.
      • Responsible to generate specific technical solutions to support cabin or cargo compartment upgrades including, but not limited to, cabin or cargo equipment installation, systems and electrical modification.
      • Responsible for generating installation, adaptation or removal instructions to support input for Service Bulletins.
      • Responsible for engineering drawings accuracy and quality.
      • Responsible to determine the parts required for Kit definition.
      • Responsible for documentation support of the certification process.
      • Supports the certification process as required.
      • Supports onsite modification team as required including direct onsite support.
      • Responsible to answer/resolve queries during and after work instruction and kit delivery.
      • Support the Payload Modification leader as required.
      • Create and ensure that the engineering is robust and meets integrated project requirements.
      • Responsible for the delivery of integrated engineering solutions meeting technical, weight, program, and cost targets.
      • Ensure that diversely located teams are supported with the appropriate infrastructure, communication and direction.
      • Manage design changes that guarantee an optimum engineering result.
      • Ensure that the design can be certified and all the necessary data for test and certification is produced.
      • Provide strong liaison with other departments both internally and internationally.
      • Develop and manage program enablers and ensure their timely and high quality delivery.



       
      • Minimum of 5 years in aviation or 3 years in aircraft modification experience, specifically cabin.
      • Must have strong project or program engineering experience.
      • Must have extensive experience with Microsoft PowerPoint and Project.
      • Ability to read and make corrections to engineering drawings.
      • Ability to write reports, technical memorandums, interface agreements, work statements and requirements documents using good technical English.
      • Ability to effectively present information to customers, both internal & external.
      • Ability to develop and present design and program reviews and answer questions thereto.
      • Ability to map and understand complex engineering processes, and to extract information from those processes to include timescales, enablers, deliverables and risk.
      • Ability to inter-relate with and motivate diverse teams.
      • Ability to lead effectively.

       
      Education / Special Qualifications:

      • BS Engineering Degree

       
      Job Number: 1710072161
      Job Location: Mobile, AL
      Duration: 3 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Rick Ingle
      Address: 11828 W CENTRAL STE 100
      City, State: WICHITA, KS 67212-5129
      Phone: 316/729-1800
      800 Phone: 800/333-8644
      Fax Phone: 316/729-1857
      Email: cecjwichita@pdstech.com
      Website: [

      Calibration Technician -

      Description:
      JSG is looking for a Calibration Technician for a 15 Month Contract Opportunity with our client in Coatesville, PA


      ASSIGNED DUTIES:

      Recall calibrated tooling periodically in accordance with company's master calibration schedule.
      Send complex calibrated tooling out to a calibration vendor for periodic inspection/maintenance.
      Perform simple calibrations in-house in accordance with Sikorsky and NIST (National Institute of Standards and Technology) procedures.
      Maintain certification documentation for each piece of Sikorsky PA’s calibrated tooling.
      Follow broad instructions and general methods to work from metrology procedures and standards, tool designs, engineering drawings, etc., to perform inspection and calibration duties.
      Set up and operate a variety of precision gages and instruments, and perform complex layouts, to inspect and calibrate tools to metrological standards.
      Repair, adjust micrometers, height gages, vernier calipers
      Maintain close liaison with other departments to resolve metrology problems.
      Troubleshoot/repair testing equipment; have a working knowledge of electricity, circuitry, and mechanical components.
      Demonstrate knowledge of the technical standards for establishing calibration set out by the American Society of Testing and Materials.
      Skills Required:

      Candidate must demonstrate excellent math skills (emphasis on trigonometry and geometry) and be able to analyze numerical data
      Candidate must demonstrate computer literacy; with emphasis on Microsoft Access and Excel for data management.
      Experience Required:

      Minimum High School Diploma or Equivalent Required
      Formal education in Calibration Technology; or American Society for Quality (ASQ) Certified Calibration Technician certification Required
      Demonstrated aerospace metrology experience or Military calibration experience required
       
      Job Number: 358918
      Job Location: Coatesville, PA
      Rate: $21.50hr
      Per Diem: no
      Overtime: Yes
      Duration: 15 months
      Start Date: asap
      Input Date: 10/10/2017
      Firm Name: JOHNSON SERVICE GROUP
      Attention: Rich Martinsen
      Address: 950 S BASCOM AVE STE 2122
      City, State: SAN JOSE, CA 95128
      Phone: 408/728-9510
      800 Phone: 866/656-0539
      Fax Phone: 408/271-2701
      Email: rmartinsen@jsginc.com
      Website: www.jsginc.com

      Chief Engineers

      Description:
      PDS Tech is seeking an Engineering Aid for an open position in Stratford,CT.

      Perform project management activities for a US Army Blackhawk FMS program in support of the FMS platform team. This position supports the platform Engineering Lead including responsibility for managing all engineering and technical aspects of the projects assigned. Supporting responsibilities include:
      • Co-ordinate engineering activities with lead engineers and multiple engineering groups: systems engineering, configuration management, functional engineering groups (i.e. avionics, electrical, mission equipment, airframe, propulsion, etc) ensuring that root cause and corrective action is implemented as required to bring issues to closure in accordance with cost, schedule, quality and technical performance requirements as agreed to by contract.
      • With support from systems engineering, responsible for the oversight of aircraft attributes, (weight/balance, R&M, dynamics and performance), technical design, and process engineering efforts, including Design to Cost (DTC), Design for Manufacturing (DFM), and Design for Affordability (DFA), compliance to Aviation Regulations and design qualification and the management of field technical and safety issues.
      • Responsible for managing all engineering, qualification requirements, configuration management and other technical aspects of the projects assigned with resource plans, SOW, compliance matrices, CDRLs, cost, schedules and risk management plans.
      • Act as an engineering interface for development, contracting and execution of new business opportunities with Programs and the US Government Business Office (USGBO) Proposal Center.
      • Oversee supplier development of hardware, software, and systems ensuring that contracts are executed within schedule, cost and performance requirements.
      • Develop, review and approve project metrics that measure engineering cost and schedule performance to contract and customer requirements utilizing EVMS (Earned Value Management System).
      • Prepare and present formal presentations to both internal and external customers.  







      EDUCATION:
      Bachelor in Engineering or related technical field, MS Eng/MBA preferred.

      EXPERIENCE:
      10+ years of engineering/manufacturing background and/or project management background. Earned value experience, Process Excellence and aerospace experience with emphasis in electrical and avionics preferred.








       
      Job Number: 1710063712
      Job Location: Stratford, CT
      Per Diem: No
      Duration: 24 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Ryan Bushey
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: [

      Circuit Card Assembly Specialist

      Description:
      PDS Tech Inc. is seeking Circuit Card Assembly Specialists for an expanding program in Huntsville, AL.
      • Performs all Circuit Card production assembly operations on electronic/electrical assemblies and subassemblies.
      • Performs simple rework and modification to circuit card parts and assemblies.
      • Provides maintenance on machines and tooling and machine set up tasks to prepare machines for production activity following the machine inspection checklists.
      • Documents results in accordance with applicable procedures.
      • Collects and inputs data for statistical process control analysis.

      Work related skills equivalent to 3 years of circuit card related technical experience
      Associates (2-year) degree in electronics, mechanical or other technical discipline 

      Basic Manufacturing Skills

      Basic Electricity

      Circuit Card Assembly (CCA) experience

      J-standard soldering certified

       
       
      Job Number: 1710072262
      Job Location: Huntsville, AL
      Duration: 12 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Enrique Perez
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: [

      Circuit Card Assembly Specialist

      Description:
      PDS Tech Inc. is seeking a Circuit Card Assembly Specialist for an open position in Huntsville, AL

      Performs all Circuit Card production assembly operations on electronic/electrical assemblies and subassemblies as an individual or as a member of a cross-functional, high performance work team. Performs simple rework and modification to circuit card parts and assemblies per requirements. Provides maintenance on machines and tooling and machine set up tasks to prepare machines for production activity following the machine inspection checklists. Documents results in accordance with applicable procedures. Collects and inputs data for statistical process control analysis.
      Work related skills equivalent to 3 years of circuit card related technical experience or a 2-year degree in electronics, mechanical or other technical discipline (or a minimum successful completion of all electronic courses contained with a 2-year electronics technical degree curriculum).

      Basic Manufacturing Skills

      Basic Electricity

      Circuit Card Assembly (CCA) experience

      J-standard soldering certified

      Space addendum certified (3 candidates needed)
       
      Job Number: 1710071891
      Job Location: Huntsville, AL
      Duration: 7 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Enrique Perez
      Address: 3201 CHERRY RIDGE DR STE A103
      City, State: SAN ANTONIO, TX 78230-4824
      Phone: 210/524-1496
      800 Phone: 866/570-1503
      Email: cecjsanantonio@pdstech.com
      Website: [

      Commercial Avionics Systems Engineer

      Description:
      PDS Tech, Inc  is seeking a Commercial Avionics Systems Engineer for an open position in Trumbull, CT.
      Seeking a candidate for a Commercial Avionics Systems Engineer to be an integral part of a small and fast-paced team supporting the engineering projects, product development, and test. 

      Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes. 

      Airframes may include, but are not limited to S-76, S-92 and their derivatives, including integration of new technologies into the S-92. 

      Primary Responsibilities 
      1. Development of requirements 
      2. System Integration 
      3. Generation of lab and aircraft test procedures 
      4. Troubleshooting avionics issues on test, production and fielded aircraft 
      5. Support program management reviews 
       
      Beneficial Experience 

      - FAA and foreign certification (preferred) 
      - DO-178B, DO-160 and DO-254 processes (preferred) 
      - Technical project management (preferred) 
      - Supplier technical management (preferred) 
      - Pilot or A&P experience (preferred) 

      Educational Requirements: 
      - BS Engineering in a related field w/7+ years relevant professional experience 
      - Will consider non-degreed candidate's who have equivalent professional experience (11+ years) 
       
      Job Number: 1710064302
      Job Location: Trumbull, CT
      Per Diem: No
      Duration: 24 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Roger Greco
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: [

      Commercial Avionics Systems Engineer -

      Description:
      Johnson Service Group (JSG) is seeking a candidate for a Commercial Avionics Systems Engineer to be an integral part of a small and fast-paced team supporting the engineering projects, product development, and test.

      Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.

      Airframes may include, but are not limited to S-76, S-92 and their derivatives, including integration of new technologies into the S-92.

      Primary Responsibilities

      Development of requirements
      System Integration
      Generation of lab and aircraft test procedures
      Troubleshooting avionics issues on test, production and fielded aircraft
      Support program management reviews
      Beneficial Experience

      FAA and foreign certification (preferred)
      DO-178B, DO-160 and DO-254 processes (preferred)
      Technical project management (preferred)
      Supplier technical management (preferred)
      Pilot or A&P experience (preferred)
      Educational Requirements:

      BS Engineering in a related field w/7+ years relevant professional experience
      Will consider non-degreed candidate's who have equivalent professional experience (11+ years)
       
      Job Number: 356482
      Job Location: Trumbull, CT
      Rate: $56hr
      Per Diem: yes
      Overtime: possible
      Duration: 15 months
      Start Date: asap
      Input Date: 10/10/2017
      Firm Name: JOHNSON SERVICE GROUP
      Attention: Rich Martinsen
      Address: 950 S BASCOM AVE STE 2122
      City, State: SAN JOSE, CA 95128
      Phone: 408/728-9510
      800 Phone: 866/656-0539
      Fax Phone: 408/271-2701
      Email: rmartinsen@jsginc.com
      Website: www.jsginc.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Completions Design Engineer

      Description:
      Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Final Phase Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation.Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area.
       
      Job Number: 24-179
      Job Location: Savannah, GA
      Rate: $58.00 - $63.00
      Per Diem: Yes
      Overtime: Yes
      Duration: 1 Year plus
      Start Date: ASAP
      Input Date: 09/01/2017
      Firm Name: PRECISION PERSONNEL INC
      Attention: Matt
      Address: 600 CLEVELAND ST STE 700
      City, State: CLEARWATER, FL 33755
      Phone: 727/449-0600
      800 Phone: 877/600-2333
      Fax Phone: 727/449-0627
      Website: www.precisionpersonnel.com

      Completions Electrical Design Engineer

      Description:
      • Experience with Aircraft Cabin Interiors and Systems to include but not limited to: Cabin Management System, Cabin Entertainment System, Cabin Lighting, Cabin Switch Controls, Telephone System, Satellite communications, Water System, Waste System, EWIS, Cabin interior monuments and Seats
      • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
      • 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

      Essential Functions:
      • Contributes to planning, developing and coordinating of important engineering projects
      • Provides specialized technical assistance to team members
      • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
      • Determines and develops own approach to solutions within schedule and cost objectives
      • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
      • Acts as liaison with representatives outside of the assigned group/area.
       
      Job Number: 24-183
      Job Location: Savannah, GA
      Rate: $58 - $63
      Per Diem: Yes
      Overtime: Yes
      Duration: 1 Year plus
      Start Date: ASAP
      Input Date: 10/16/2017
      Firm Name: PRECISION PERSONNEL INC
      Attention: Matt
      Address: 600 CLEVELAND ST STE 700
      City, State: CLEARWATER, FL 33755
      Phone: 727/449-0600
      800 Phone: 877/600-2333
      Fax Phone: 727/449-0627
      Email: matt@precisionpersonnel.com
      Website: www.precisionpersonnel.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Component Design Engineer in East Aurora, NY #4916AS

      Description:
      Recruiter to Contact: Adam Salazar
      Job Title: Design Engineer
      Job Number: 4916
      Location: East Aurora, NY
      Compensation: DOE
      Assignment Length: 12 Month
      2 openings

      GENERAL FUNCTION:

      This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components and systems that will become the new products of Moog, Inc. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.

      DIMENSIONS:

      Expected annual production sales from projects: $4M to $10M

      NATURE AND SCOPE:

      A variety of technical functions exist within the Design/Development Engineering Department. Reporting to the division's Chief Engineer typically are Associate Engineers, Development Engineers, Design and Project Engineers, Senior Design and Senior Project Engineers, Senior Staff Engineers, and Principal Engineers, as well as Engineering Managers, Section Heads or Group Leaders. The Design Engineer typically reports to an Engineering Manager, Section Head or Group Leader within the department and on demanding projects he/she might work under the leadership of a Senior Design Engineer. The incumbent receives instructions on specific assignment objectives, complex features, and possible solutions. He/She is expected to make independent and unreviewed decisions on routine technical matters. However, assistance is furnished on unusual problems and work is periodically reviewed for application of sound professional judgment.

      The Design Engineer is a key contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. The products of Moog generally are unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The Design Engineer generally will operate as part of a design/development team, which includes other Department engineers with his/her primary concern being component design. The incumbent must effectively coordinate the work of drafters, technicians, and others who assist in specific assignments.

      In the early stages of a new program, the project team will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations. Under the technical direction of the Engineering Manager, Section Head or the team's lead engineer, the Design Engineer will then guide the evolution of the conceptual design, technical project planning, detail design, and development testing. This requires some travel and the participation in presentations to customers.

      The Design Engineer will apply creative skills to generate designs that fulfill the conflicting requirements of meeting performance goals, robustness over extreme conditions, minimum weight, awkward envelopes, and cost effectiveness. Successful mechanical designs require judicious material selection, effective use of stress analysis, and sometimes design of unique kinematic mechanisms. Successful electrical designs require intelligent component selection and effective use of thermal stress analysis. Circuit designs must be reliable and make optimal use of available space.

      To be considered for the position of Design Engineer, a candidate should have a minimum of an MS Degree, preferably in Mechanical, Aeronautical or Electrical Engineering plus three years of design/development engineering experience. As an alternative, the candidate would have a BS Degree plus six years minimum of design/development engineering experience. To fulfill the demands of design and development of new products the individual must have self-starting instincts and strong analytical skills. A Mechanical Design Engineer should have a good sense of three dimensional spatial orientation and seasoned knowledge of mechanical hardware design. An Electrical Design Engineer should have solid knowledge of circuit design and a wide range of electrical components.

      Basic knowledge of closed loop control systems and good communication skills is also necessary.

      ACCOUNTABILITIES:

      1. Contribute to the development of new product requirements through consulting with customers and sales personnel.

      2. Validate conceptual problem solutions by performing trade studies and analyses.

      3. Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.

      4. Operate as a key element in a team of creative, independent individuals.

      5. Represent Moog in a manner consistent with its technical reputation.

      6. Create reliable designs through a comprehensive experimental development test program.

      7. Document designs, analyses, and test results with accurate and concise repo
       
      Job Number: #4916AS
      Job Location: East Aurora, Ny
      Rate: 50/hr W2 Ceiling rate
      Per Diem: N/A
      Duration: 12 Months+
      Start Date: ASAP
      Input Date: 09/22/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Adam Salazar
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Website: www.midcom.com

      Component Installation Designer

      Description:
      PDS is seeking a Component Installation Designer for an open position in Trumbull, CT

      The designer will work with a variety of engineering disciplines in a cooperative, Product Development Team format.
      Candidates will be responsible for the design and preparation of detail, assembly and installation drawings as required to define aircraft component and harness installations.
      The candidate will tackle challenging assignments and develop unique solutions to rotorcraft Component Installation Design. Areas of design responsibility
      include electrical power system components, instrument panel and crew station design, antennas,
      lighting, airspeed systems, molded wiring assemblies and wire harness assemblies/installations.
       
      The preferred candidate will possess a four year degree in an engineering discipline, either Mechanical or Electrical, 2000 hours CATIA design experience as  well as 3 to 4 years’ experience in a design/manufacturing environment.
       
       
      Job Number: 1710064090
      Job Location: Trumbull, CT
      Per Diem: No
      Duration: 12 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chris O\'Connor
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: [

      Component Installation Designer

      Description:
      PDS is seeking a Component Installation Designer for an open position in Stratford, CT

      The designer will work with a variety of engineering disciplines in a cooperative, Product Development Team format.
      Candidates will be responsible for the design and preparation of detail, assembly and installation drawings as required to define aircraft component and harness installations.
      The candidate will tackle challenging assignments and develop unique solutions to rotorcraft Component Installation Design. Areas of design responsibility
      include electrical power system components, instrument panel and crew station design, antennas,
      lighting, airspeed systems, molded wiring assemblies and wire harness assemblies/installations.
       
      The preferred candidate will possess a four year degree in an engineering discipline, either Mechanical or Electrical, 2000 hours CATIA design experience as  well as 3 to 4 years’ experience in a design/manufacturing environment.
       
       
      Job Number: 1710064091
      Job Location: Stratford, CT
      Per Diem: No
      Duration: 12 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chris O\'Connor
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: [

      Component Installation Designer

      Description:
      PDS is seeking a Component Installation Designer for an open position in Stratford, CT

      The designer will work with a variety of engineering disciplines in a cooperative, Product Development Team format.
      Candidates will be responsible for the design and preparation of detail, assembly and installation drawings as required to define aircraft component and harness installations.
      The candidate will tackle challenging assignments and develop unique solutions to rotorcraft Component Installation Design. Areas of design responsibility
      include electrical power system components, instrument panel and crew station design, antennas,
      lighting, airspeed systems, molded wiring assemblies and wire harness assemblies/installations.
       
      The preferred candidate will possess a four year degree in an engineering discipline, either Mechanical or Electrical, 2000 hours CATIA design experience as  well as 3 to 4 years’ experience in a design/manufacturing environment.
       
       
      Job Number: 1710063953
      Job Location: Stratford, CT
      Per Diem: No
      Duration: 12 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chris O\'Connor
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: [

      Component Installation Designer

      Description:
      PDS is seeking a Component Installation Designer for an open position in Trumbull, CT

      The designer will work with a variety of engineering disciplines in a cooperative, Product Development Team format.
      Candidates will be responsible for the design and preparation of detail, assembly and installation drawings as required to define aircraft component and harness installations.
      The candidate will tackle challenging assignments and develop unique solutions to rotorcraft Component Installation Design. Areas of design responsibility
      include electrical power system components, instrument panel and crew station design, antennas,
      lighting, airspeed systems, molded wiring assemblies and wire harness assemblies/installations.
       
      The preferred candidate will possess a four year degree in an engineering discipline, either Mechanical or Electrical, 2000 hours CATIA design experience as  well as 3 to 4 years’ experience in a design/manufacturing environment.
       
       
      Job Number: 1710063951
      Job Location: Trumbull, CT
      Per Diem: No
      Duration: 12 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chris O\'Connor
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: [

      Component Integration

      Description:
      PDS Tech is seeking a Avionics System Integration Engineer for an open position in Stratford, CT.-

       
      The particular responsibilities of this position include Component and/or Process Design, Work Instruction Planning, and Manufacturing Support of Electro-Mechanical Aircraft Installations. Candidates will evaluate designs for producibility, develop tooling and manufacturing plans for components, assemblies and installations. 
       


      Qualifications:
      Knowledge of engineering drawings, geometric tolerances and dimensioning, as well as, computer aided drafting skills are required. Data collection and reporting including engineering change tracking are additional responsibilities of the position.  A 4 year engineering degree in a related field.
       


       
      Job Number: 1710065516
      Job Location: Stratford, CT
      Per Diem: No
      Duration: 24 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Ryan Bushey
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: [

      Component Integration

      Description:
      PDS Tech is seeking a Avionics System Integration Engineer for an open position in Stratford, CT.-

      Tasks include:



      - Requirements analysis and allocation



      - Requirements allocation to Component



      - System/subsystem Design



      - System Integration and Verification


      The preferred candidate will hold 5+ years experience in all phases of Electrical M.E. Solid understanding of our Blackhawk International Derivative Programs and how they are structured.
       


       
      Job Number: 1710065224
      Job Location: Stratford, CT
      Per Diem: No
      Duration: 24 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Ryan Bushey
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: [

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Components Engineer - Level 2

      Description:
      Components Engineer - Level 2

      Location: Dallas, TX (Grand Prairie, TX)
      Rate: $65.00 - $75.00/HR
      Duration: 1 year contract
      Shift: 1st Shift

      **MUST be a U.S. Citizen**
      **MUST be able to obtain a Secret security clearance**

      Description:
      - Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements.
      - Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components.
      - Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records.
      - Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.


      Skill/Experience/Education
      Mandatory:
      - Must have parts management experience working with designers to select components for use in designs.
      - Must have obsolescence experience working with component lists and industry tools to evaluate part availability and determining path forward when issues are identified.
      - Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
      - Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages.
      - Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance.
      - The candidate will periodically be required to make presentations to program management and customers.
      - Must have ability to obtain a Secret security clearance.


      Desired:
      - Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies.
      - Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.
       
      Job Number: 7584
      Job Location: Dallas, TX
      Rate: $65.00 - $75.00/HR
      Per Diem: Split Possible
      Overtime: Possible
      Duration: 1 yr
      Input Date: 10/06/2017
      Firm Name: INCONEN CORPORATION
      Attention: Patrick O'Neil
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Website: www.inconen.com

      Components Engineer - Level 2 - TX - C

      Description:
      Chipton-Ross is seeking a Components Engineer - Level 2 for an opening in Dallas, TX.

      RESPONSIBILITIES:
      Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.

      REQUIRED EXPERIENCE:
      Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM's, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers.

      PREFERRED EXPERIENCE:
      Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies. Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.

      EDUCATION:
      Accredited High School Diploma/GED

      WORK HOURS:
      9/80, 1st Shift

      MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.


       
      Job Number: 164049
      Job Location: Dallas, TX
      Rate: Up to $75.00 DOE
      Duration: 12 Months
      Input Date: 10/17/2017
      Firm Name: CHIPTON ROSS
      Attention: Kevin Suk
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: ksuk@chiptonross.com
      Website: www.chiptonross.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Components Engineer - Level 2 / Obsolescence / Parts Management / Must have ability to obtain a Secret security clearance TX

      Description:
      159780
      Requirement# MFC-REQ-1421
      Work location Dallas, TX
      Work Week 9/80
      Priority
      Needed Date 07/05/2017
      End Date 07/05/2018
      Number of Resources 1
      Security Clearance Ability to Obtain Secret
      (Prime Contract:, Can start w/o clearance:Yes, Interim Clearance Sufficient:Yes)

      Type of Service: Engineering
      Title: Components Engineer - Level 2
      Description
      Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.

      Skill/Experience/Education
      Mandatory:

      Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers. Must have ability to obtain a Secret security clearance.
      Desired:

      Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies. Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.

      Skill Matrix

      Parts Management Working with designers to select components for use in designs. 0-3 Years Yes
      Obsolescence Work with component lists and industry tools to evaluate part availability and determining path forward when issues are identified. 0-3 Years Yes



      Interview Required Yes
      Max Pay Rate 75.00 USD
      Shift 1st Shift
      OT Allowed No
      Travel No
      Non-Exempt
       
      Job Number: JE-1421
      Job Location: Dallas, TX
      Rate: 75/hr max
      Duration: 12 month contract
      Input Date: 10/17/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Jeana Edrozo
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Website: www.midcom.com

      Components Engineer - Level 2 Level 2- Interim Secret

      Description:
      PDS Tech, Inc. is seeking a Components Engineer- Level 2 for an open position in Dallas, TX.
      Job Description:
      • Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements.
      • Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components.
      • Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records.
      • Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components. 

      Mandatory Skills:
      • Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
      • Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages.
      • Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance.
      • The candidate will periodically be required to make presentations to program management and customers.
      • Must have ability to obtain a Secret security clearance. 
      • Parts Management=  Working with designers to select components for use in designs. 
      • Obsolescence = Work with component lists and industry tools to evaluate part availability and determining path forward when issues are identified. 
      • Must have Interim Secret Clerance.


      Desired Skills:

      • Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies.
      • Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline. 


       
       
      Job Number: 1710070154
      Job Location: Grand Prairie, TX
      Per Diem: No
      Duration: 12 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Dale Hightower
      Address: 2154 N CENTER ST STE 405D
      City, State: NORTH CHARLESTON, SC 29406
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: [

      Components Engineer - Level 3- Interim Secret

      Description:
      PDS Tech, Inc. is seeking a  Components Engineer - Level 3 for an open position in Orlando, FL
      Job Description: 

      • Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements.
      • Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components.
      • Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.

      Skills:
      • Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
      • Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages.
      • Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance.
      • The candidate will periodically be required to make presentations to program management and customers. 


      Mandatory Skills:

      • Five years or more of experience in Component Engineering.
      • Must be proficient with computer tools such as MS Excel.
      • Should be comfortable working in a team environment and willing to shadow Senior Components Engineer at the start of the assignment to develop the necessary skills for this position.
      • Also must be able to learn task specific tools such as Q-Star, Partminer and web based obsolescence tools.
      • Must have good communication skills and able to effectively work with manufacturers and other external part suppliers.


       
       
      Job Number: 1710071428
      Job Location: Orlando, FL
      Per Diem: No
      Duration: 12 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Dale Hightower
      Address: 2154 N CENTER ST STE 405D
      City, State: NORTH CHARLESTON, SC 29406
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: [

      Components Engineer - Level 3

      Description:
      Location: Orlando, FL
      Rate: $40.00 - $45.00/HR
      Duration: 1 year contract
      Shift: 4x10

      **MUST have an Active Secret Clearance or have had one within the last two (2) years**

      Description
      - Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements.
      - Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components.
      - Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records.
      - Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.

      Skills:
      - Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
      - Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages.
      - Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance.
      - The candidate will periodically be required to make presentations to program management and customers.

      Skill/Experience/Education
      Mandatory:
      - Five years or more of experience in Component Engineering.
      - Must be proficient with computer tools such as MS Excel.
      - Should be comfortable working in a team environment and willing to shadow Senior Components Engineer at the start of the assignment to develop the necessary skills for this position.
      - Also must be able to learn task specific tools such as Q-Star, Partminer and web based obsolescence tools.
      - Must have good communication skills and able to effectively work with manufacturers and other external part suppliers.
       
      Job Number: 7694
      Job Location: Orlando, FL
      Rate: $40.00 - $45.00/HR
      Per Diem: Split Possible
      Overtime: Possible
      Duration: 1 yr
      Input Date: 10/12/2017
      Firm Name: INCONEN CORPORATION
      Attention: Patrick O'Neil
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Email: patrick@inconen.com
      Website: www.inconen.com

      Components Engineer - Level 3 (3) - FL - C

      Description:
      Chipton-Ross is seeking a Components Engineer - Level 3 (3) for an opening in Orlando, FL.

      RESPONSIBILITIES:
      Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components. Skills: Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM's, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers.

      REQUIRED EXPERIENCE:
      Five years or more of experience in Component Engineering. Must be proficient with computer tools such as MS Excel. Should be comfortable working in a team environment and willing to shadow Senior Components Engineer at the start of the assignment to develop the necessary skills for this position. Also must be able to learn task specific tools such as Q-Star, Partminer and web based obsolescence tools. Must have good communication skills and able to effectively work with manufacturers and other external part suppliers.

      EDUCATION:
      Accredited High School Diploma/GED

      WORK HOURS:
      4/10, Full-Time

      MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
       
      Job Number: 164497
      Job Location: Orlando, FL
      Rate: Up to $45.00 DOE
      Duration: 12 Months
      Input Date: 10/17/2017
      Firm Name: CHIPTON ROSS
      Attention: Terry Jones
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: tjones@chiptonross.com
      Website: www.chiptonross.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Components Engineer - Level 3 with active secret FL

      Description:
      160017
      Requirement #MFC-REQ-1448
      Work Location Orlando, FL
      Work Week 4/10-A
      Needed Date 09/11/2017
      End Date 09/03/2018
      Number of Resources 3
      Security Clearance Active Secret

      Title: Components Engineer - Level 3

      Description
      Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components. Skills: Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers.

      Skill/Experience/Education

      Mandatory:

      Five years or more of experience in Component Engineering. Must be proficient with computer tools such as MS Excel. Should be comfortable working in a team environment and willing to shadow Senior Components Engineer at the start of the assignment to develop the necessary skills for this position. Also must be able to learn task specific tools such as Q-Star, Partminer and web based obsolescence tools. Must have good communication skills and able to effectively work with manufacturers and other external part suppliers.


      Interview Required Yes
      Max Pay Rate 45.00 USD


      OT Allowed Yes (#hours allowed: 10, Pre-Approval Reqd.:Yes)

      Exempt
       
      Job Number: JE-1448
      Job Location: Orlando, FL
      Rate: 45/hr max
      Duration: 12 month contract
      Input Date: 10/03/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Jeana Edrozo
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Website: www.midcom.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Contract - Electrical Harness Installation Engineer-Special Missions

      Description:
      Unique Skills:
      Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required. _________________________________________________________________________________________________________________________ Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned
       
      Job Number: 115282
      Job Location: Savannah, GA
      Per Diem: Possible
      Overtime: Possible
      Start Date: ASAP
      Input Date: 09/07/2017
      Firm Name: INTERGEN GROUP
      Attention: Kim mason
      Address: SUITE 200
      5051 PEACHTREE CORNERS CIR

      City, State: PEACHTREE CORNERS, GA 30092
      Phone: 678/318-1816
      Fax Phone: 678/493-1467
      Website: www.intergengroup.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Controls Engineer

      Description:
      -Seeking Controls Engineer with atleast 10 years experience
      -Allen Bradley PLC programming required.
      -Must have electrical design experience using AutoCAD. AutoCAD Electrical would be a strong plus.
      -Must have production machinery background.
      - Contact steve@blacktreetech.com
       
      Job Location: Roanoke area, VA
      Rate: Negotiable
      Per Diem: YES
      Overtime: Possible
      Duration: 11+ Months
      Start Date: ASAP
      Input Date: 09/13/2017
      Firm Name: BLACKTREE TECHNICAL GROUP
      Attention: Steve Lucey
      Address: 300 TRADECENTER STE 1400
      City, State: WOBURN, MA 01801
      Phone: 781/932-3333
      Website: www.blacktreetech.com

      Creo/SolidWorks

      Description:
      EM packaging, electromechanical pkg, aircraft/aerospace, electronics

      Immediate needs, call our national recruiters
       
      Input Date: 05/15/2017
      Firm Name: ADDITIONAL CONTRACT SERVICES
      Attention: Adam, Sean, Brendan, or Jennifer
      Address: 85 RANGEWAY RD BLDG 1 STE 2
      City, State: NORTH BILLERICA, MA 01862
      800 Phone: 800/661-8272
      Email: acs@acsnatl.com
      Website: www.acsnatl.com

      Crew Station Design

      Description:
      PDS Tech is seeking a Crew Station Design for an open position in Shelton, CT.

      Responsibilities to Include:Develop and design menus, logic and display graphics in a multifunction glass cockpit Pilot Vehicle Interface (PVI) or coordinate design activities of suppliers. Assume responsibility for PVI designs and coordinate with people of various disciplines in an Integrated Product Team environment that requires flexibility and diplomacy. Coordinate evaluation of designs in simulation, take ownership of design approval, and produce configuration-managed specification documents for software requirements developers. Support hot bench, ground, and flight testing of finished product. Secondary duties may include design and development of air vehicle Crew Station Geometry and layout of controls and displays to accommodate full anthropometric range of expected users. Evaluate Crew Station Design and layout in physical and/or electronic mockups, simulations and air vehicles
       
      Required:
      - MS/MA in Human Factors, Experimental Psychology, or related degree
      - (BS Industrial Design, Industrial Engineering or equivalent with Human Factors coursework will be considered)
      - Experience with Part Mission or Full Mission simulation of Pilot Vehicle Interface designs
      - Rapid Prototyping tools such as VAPS® or equivalent
      - Basic Office and database management software (word processing, Power Point, Excel, drawing tools, etc)
      - Excellent communication, writing and presentation skills
       
      Desirable:
      - Experience in military aviation (helicopters in particular).
      - Rational ClearCase, or equivalent configuration management tool.
      - Experience with Human Modeling tools such as Jack® or equivalent.
      - Experience with 3D modeling tools such as CATIA®, ProEngineer® or equivalent
       
       
      Job Number: 1610058626
      Job Location: Shelton, CT
      Per Diem: No
      Duration: 24 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Ryan Bushey
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: [

      Design Checker

      Description:
      1. Review 3D engineering data for conformance to requirements as directed.
      2. Check parts for fit, form and function to the extent that information is available.
      3. Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to requirements as directed.

      Checkers are responsible for determining the acceptability of data in the following areas:
      1. Accuracy and completeness of engineering product definition data, including CAD and PDM data.
      2. Proper application and compliance with all Engineering and customer drawing requirements.
      3. Use and understanding of GD & T a must.
      4. Dimensioning and tolerancing including familiarity with ASME Y14.5.
      5. Application of best drafting and design practices and procedures.
      6. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
      7. Advise Design personnel regarding company drawing and design practices and procedures.
      8. Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
      9. Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
      10. Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
      11. Knowledge of company parts list & PdocM, a plus.
      12. Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

      Essential Duties and Responsibilities
      1. Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
      2. Ensures designs meet customer criteria, quality standards and FAA requirements.
      3. Adheres to budget and project schedules.
      4. Provides design guidance and feedback to other engineering personnel.
      5. Other duties as assigned.
      6. Knowledge of industry design and documentation standards.
      7. Experience with mechanical assemblies and manufacturing technique design.
      8. Ability to work independently and cross-functionally.
      9. Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills.
      10. Knowledge of Excel, Share Point software, Microsoft Office a plus

      Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
       
      Job Number: 24-191
      Job Location: Savannah, GA
      Rate: $50.00 - $55.00
      Per Diem: Yes
      Overtime: Yes
      Duration: 1 Year plus
      Start Date: ASAP
      Input Date: 10/16/2017
      Firm Name: PRECISION PERSONNEL INC
      Attention: Matt
      Address: 600 CLEVELAND ST STE 700
      City, State: CLEARWATER, FL 33755
      Phone: 727/449-0600
      800 Phone: 877/600-2333
      Fax Phone: 727/449-0627
      Email: matt@precisionpersonnel.com
      Website: www.precisionpersonnel.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Design Engineer

      Description:
      Design Engineer
      East Aurora, NY
      12+ month contract

      This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components and systems. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.


      NATURE AND SCOPE:

      The Design Engineer typically reports to an Engineering Manager, Section Head or Group Leader within the department and on demanding projects he/she might work under the leadership of a Senior Design Engineer. The incumbent receives instructions on specific assignment objectives, complex features, and possible solutions. He/She is expected to make independent and unreviewed decisions on routine technical matters.

      The Design Engineer is a key contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. The Design Engineer generally will operate as part of a design/development team, which includes other Department engineers with his/her primary concern being component design.

      Successful mechanical designs require judicious material selection, effective use of stress analysis, and sometimes design of unique kinematic mechanisms. Successful electrical designs require intelligent component selection and effective use of thermal stress analysis. Circuit designs must be reliable and make optimal use of available space.

      Required:

      MS Degree preferred in Mechanical, Aeronautical, or Electrical Engineering plus 3 years of design experience

      Alternatively, BS Degree plus 6 years of design experience

      Self-starting instincts

      Strong analytical skills

      3D spatial orientation

      Mechanical hardware design.

      Circuit design and a wide range of electrical components.

      Basic knowledge of closed loop control systems

      Good communication skills
       
      Job Number: 52252
      Job Location: East Aurora, NY
      Rate: DOE
      Per Diem: Possible
      Overtime: Possible
      Duration: 12 months
      Start Date: 9/5/17
      Input Date: 09/21/2017
      Firm Name: BUTLER AEROSPACE & DEFENSE
      Attention: Laura Leszek
      Address: SHELTON POINTE STE 204
      2 TRAP FALLS ROAD

      City, State: SHELTON, CT 06484
      Phone: 203/926-2705
      Fax Phone: 203/926-0082
      Website: www.butler.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Design Engineer - Electrical

      Description:
      ESSENTIAL DUTIES AND RESPONSIBILITIES:
      • Research aircraft systems and components as necessary to perform assignments.
      • Design and develop engineering solutions in support of innovative concepts, and the replication and modification of existing electrical and electromechanical designs.
      • Develop, analyze, and substantiate low to high complex repair solutions for mitigating all kinds of electrical issues.
      • Provide design and repair engineering assistance in support of mechanical and composite projects when assigned.
      • Create technical documents for certification, maintenance and operation of various types of projects.
      • Produce structural, technical and sometimes market analysis for which FAA approval can be obtained to ensure compliance with all appropriate regulatory, customer, OEM, production and management requirements.
      • Create various types of engineering drawings using common CAD software such as AutoCAD and SolidWorks.
      • Perform mechanical and electrical assembly when assigned.
      • Ensure all applicable customer, OEM, FAA, and maintenance requirements are met.
      • Approve engineering documents within authorized signatory level.
      • Train and assist other engineers in performance of their assigned tasks.
      • Participate in the development of work statements and hour estimates in support of project proposals.
      • Represent company on engineering technical matters with OEM’s, customers, operators and regulatory authorities.
      • Interact in a professional manner with members of internal and external organizations.
      • Independently evaluate, select, and adapt to situations. Modify techniques, procedures and criteria to solve problems encountered.
      • Monitor and approve engineering use of Customer, OEM, and other technical data to ensure compliance with all appropriate regulations and requirements.
      • Ensure projects are accomplished within a reasonable time frame as defined by a Project Lead or Engineering Management.
       
      Job Location: Everett, WA
      Input Date: 09/07/2017
      Firm Name: APA SERVICES
      Attention: Kami M Muehlberger
      Address: 4150 INTERNATIONAL PLZ STE 510
      City, State: FORT WORTH, TX 76109
      800 Phone: 888/272-7868
      Fax Phone: 800/285-8805
      Website: www.apaservices.net

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Design Engineer / development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components NY

      Description:
      Request number: 4916
      Date created: 08/28/2017
      Job title: Design Engineer
      Number of openings: 2

      Position location: East Aurora - NY
      Employment type: Contract
      OT exempt: No

      Shift: 1st
      Education Requirement: MS/MA
      Driving on company time?: No

      Maximum Hourly Pay Rate: 50
      Start Date: 09/05/2017
      Tentative End Date: 08/31/2018

      Job Description
      Function: GENERAL FUNCTION:

      This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components and systems that will become the new products of Moog, Inc. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.

      DIMENSIONS:

      Expected annual production sales from projects: $4M to $10M

      NATURE AND SCOPE:

      A variety of technical functions exist within the Design/Development Engineering Department. Reporting to the division's Chief Engineer typically are Associate Engineers, Development Engineers, Design and Project Engineers, Senior Design and Senior Project Engineers, Senior Staff Engineers, and Principal Engineers, as well as Engineering Managers, Section Heads or Group Leaders. The Design Engineer typically reports to an Engineering Manager, Section Head or Group Leader within the department and on demanding projects he/she might work under the leadership of a Senior Design Engineer. The incumbent receives instructions on specific assignment objectives, complex features, and possible solutions. He/She is expected to make independent and unreviewed decisions on routine technical matters. However, assistance is furnished on unusual problems and work is periodically reviewed for application of sound professional judgment.

      The Design Engineer is a key contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. The products of Moog generally are unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The Design Engineer generally will operate as part of a design/development team, which includes other Department engineers with his/her primary concern being component design. The incumbent must effectively coordinate the work of drafters, technicians, and others who assist in specific assignments.

      In the early stages of a new program, the project team will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations. Under the technical direction of the Engineering Manager, Section Head or the team's lead engineer, the Design Engineer will then guide the evolution of the conceptual design, technical project planning, detail design, and development testing. This requires some travel and the participation in presentations to customers.

      The Design Engineer will apply creative skills to generate designs that fulfill the conflicting requirements of meeting performance goals, robustness over extreme conditions, minimum weight, awkward envelopes, and cost effectiveness. Successful mechanical designs require judicious material selection, effective use of stress analysis, and sometimes design of unique kinematic mechanisms. Successful electrical designs require intelligent component selection and effective use of thermal stress analysis. Circuit designs must be reliable and make optimal use of available space.

      To be considered for the position of Design Engineer, a candidate should have a minimum of an MS Degree, preferably in Mechanical, Aeronautical or Electrical Engineering plus three years of design/development engineering experience. As an alternative, the candidate would have a BS Degree plus six years minimum of design/development engineering experience. To fulfill the demands of design and development of new products the individual must have self starting instincts and strong analytical skills. A Mechanical Design Engineer should have a good sense of three dimensional spatial orientation and seasoned knowledge of mechanical hardware design. An Electrical Design Engineer should have solid knowledge of circuit design and a wide range of electrical components.

      Basic knowledge of closed loop control systems and good communication skills is also necessary.

      ACCOUNTABILITIES:

      1. Contribute to the development of new product requirements through consulting with customers and sales personnel.

      2. Validate conceptual problem solutions by performing trade studies and analyses.

      3. Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.

      4. Operate as a key element in a team of creative, independent individuals.

      5. Represent Moog in a manner consistent with its technical reputation.

      6. Create reliable designs through a comprehensive experimental development test program.

      7. Document designs, analyses, and test results with accurate and concise repo
      Essential job functions: manufacturing and procurement as well as mechanical assembly and testing will be required.

      Request status: Open
       
      Job Number: JE-4916
      Job Location: East Aurora, NY
      Rate: 50/hr max
      Duration: 12 month contract
      Input Date: 09/28/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Jeana Edrozo
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Website: www.midcom.com

      Design Engineer- 3- SECRET

      Description:
      PDS Tech, Inc. is seeking a Design Engineer 3 in Melbourne, FL with an active DOD Secret Clearance. 

      Position Summary / Responsibilities

      The selected candidate will perform design on mechanical and electrical subsystems including ECS, Fuel, Hydraulics, Fire Protection, Mechanisms, Secondary Power, Electro-mechanical Harness Design and Routing.
      • Develop solutions to difficult problems that are thorough, imaginative, practical, and consistent with program objectives.
      • Coordination and clear communication with other disciplines during the development of design solutions.
      • Concise presentation and explanation of design issues/solutions to internal management and customer representatives.
      • Evaluation of engineering products for conformity to standards, procedures, and specifications.
      • Preparation of detail design packages, peer review design solutions for accuracy, clarity, and completeness. 

      Vehicle Subsystems Design  
      • Minimum of 5 years of Aircraft Subsystem Design experience
      • Minimum of a BS in mechanical, aerospace or electrical engineering:  
      • Willingness to relocate or take a domestic assignment to Melbourne, Florida.
      • 5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.

      All positions Require an active DoD Secret clearance

      Active DoD Secret Security Clearance is required to start. Secret Clearance must have been established or reviewed within the last 6 years. Contingent upon the ability to obtain access to Special Programs is required.
       
       
      Job Number: 1710067334
      Job Location: Melbourne, FL
      Duration: 9 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Phil Press
      Address: 370 N WESTLAKE BLVD STE 120
      City, State: WESTLAKE VILLAGE, CA 91362
      Phone: 805/418-9862
      800 Phone: 866/458-4322
      Fax Phone: 805/418-9866
      Email: cecjwestlake@pdstech.com
      Website: [

      Design Support and Training - Instructor - Tech Spec II

      Description:
      UNIQUE SKILLS
      CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.

      EDUCATION AND EXPERIENCE REQUIREMENTS
      Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

      POSITION PURPOSE
      Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

      PRINCIPAL DUTIES AND RESPONSIBILITIES
      ESSENTIAL FUNCTIONS
      1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
      2. Is consulted extensively by associates and others as a recognized authority within the field
      3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
      4. Approach to problem solving balances technical product, cost and schedule
      5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
      6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

      ADDITIONAL FUNCTIONS
      1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
      2. Performs other duties as assigned

      OTHER REQUIREMENTS
      1. Advanced degree in engineering, or related curriculum preferred
      2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
       
      Job Number: 17-758-82041
      Job Location: Southeast
      Rate: $60.00 to $62.00/per hour
      Per Diem: Split
      Overtime: Possible
      Duration: 6 mths +
      Start Date: ASAP
      Input Date: 10/17/2017
      Firm Name: AGENTE TECHNICAL
      Attention: Alexa Bui
      Address: 714 CENTERPARK DR STE 140
      City, State: COLLEYVILLE, TX 76034-2852
      Phone: 972/415-4545
      800 Phone: 866/758-2494
      Fax Phone: 866/717-5927
      Email: abui@agentetech.com
      Website: www.agentetech.com

      Design Support and Training Instructor

      Description:
      Design Support and Training - Instructor - Tech Spec II
      Savannah, GA
      Rate:$60-$62

      Unique Skills:

      CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.


      Education and Experience Requirements:

      Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

      Position Purpose:

      Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

      Principal Duties and Responsibilities:

      Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

      Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

      Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
       
      Job Number: 6620
      Job Location: Savannah, GA
      Rate: $60-$62
      Per Diem: Yes
      Overtime: Possible
      Duration: LT
      Start Date: ASAP
      Input Date: 10/12/2017
      Firm Name: INCONEN CORPORATION
      Attention: Brad
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Email: brad@inconen.com
      Website: www.inconen.com

      Designer/Drafter 3

      Description:
      PDS Tech, Inc. is seeking a Designer/Drafter for an open position in NSacaramento, CA.
      In your role you will:

      • Completes complex drawings to suit engineering changes and initiates engineering changes.
      • Completes the creation of complex design layout and detail drawings of complex products.
      • Performs compilation of materials and specification sheets.
      • Performs dimensions/specification determination necessary on complex drawings for effective manufacturing.
      • Performs the designs of cost-effective complex products with adherence to applicable industry and customer standards/specifications.
      • Completes complex investigations related to product design and maintenance.
      • Performs review of complex engineering drawings and supporting documents for adherence to drafting standards.
      • Completes planning test programs.
      • Selects material based on application; may coordinate procurement. 


       
      Skills and requirements: 
      • PTC CREO Elements/Pro 5.0 
      • Pro Sheetmetal, Piping, Cabling, Surfacing 
      • Autocad 2010 
      • Experience designing sheet metal parts, structural weldments, Electro-Mechanical packaging, large and small welded and/or bolted assemblies, fiberglass and plastic parts 
      • Experience with corrosion protection (ie. Paint, Powder Coat, anodizing, zinc plating) 
      • Experience creating bill of materials, Engineering change procedure, technical writing skills, and creating work instructions 
      • Experience working in a manufacturing environment, interfacing with factory workers, purchasing, communication with suppliers and customers, and interdepartmental interaction 


      Education and Work Experience

      • Bachelor's degree in related field with 2 years experience 
      • Associate Degree in related field with 3 years experience 
      • High School Diploma with 5 years experience 


       
       
      Job Number: 1610055971
      Job Location: Sacramento, CA
      Per Diem: No
      Duration: 6 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Lea Salmo
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: [

      Designer/Drafter 4

      Description:
      PDS Tech is seeking a candidate for the Designer/Drafter 4 position located in Sacramento, CA.

      Requirements: 
      •Prepare schematics using Elcad. Elcad experience is preferred but not mandatory. Electrical circuit design experience and willingness to use Elcad is essential. 
      • Prepare and review electrical design to US and European standards (IEEE, NFPA, DIN etc..) 
      •Prepare, review and submit technical specifications and proposals 
      •Prepare, review and submit light rails, locomotives and coaches electrical concept of low voltage and high voltage 
      •Provide support to customers, vendors, chain management and engineering management 
      •Create, update and manage redlines of Engineering/Manufacturing BOM 
      •Create and release engineering documents (redlines and BOM) via PDMLink, SAP and JDEdwards 
      •Experience working in a manufacturing environment, interfacing with factory workers, purchasing, communication with suppliers and customers, and interdepartmental interaction 
       
      Skills: 
      • The ability to interpret customer specification and design electrical schematics in consistency with US (or defined) standards is a must 
      • Interfacing and interpreting system engineering documents is a key part of the design process 
      • The ability to perform complex and technically demanding work within technical or paraprofessional area will be required 
      •Preempts potential problems and provides effective solutions in reaction to application of concepts, techniques, knowledge, or processes. 
      •Independently seeks complex solutions and unusual problems before contacting others 
      •The role may require providing expert advice, training, and technical assistance to support staff and train lower level employees. 

      Education and Work Experience: 
      •Bachelor's degree in related field with 2 years’ experience 
      •Associate Degree in related field with 3 years’ experience 
      •High School Diploma with 5 years’ experience
       
      Job Number: 1710066630
      Job Location: Sacramento, CA
      Duration: 6 months
      Input Date: 10/18/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Audrei Cortez
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: [

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Die Engineering Leads - Auburn Hills, MI

      Description:
      STS AeroStaff Services is hiring Die Engineering Leads for open positions in Auburn Hills, Michigan.

      Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

      Job Duties:

      • Conduct Stamping Simulation, Sheet metal Die Development, Die Compensation, Die Manufacturing, Die trial and Virtual Die Tryout in conjunction with Project Management and Customer Engineering teams
      • Perform binder development and draw simulations to ensure safe panels per customer requirements and standards within program timing constraints
      • Analyze spring back, surface abnormalities and other non-conformance and recommend compensation or other countermeasures
      • Develop trim lines, die faces and break lines per customer standards and product requirements
      • Understand GD&T and tolerance stack ups, make recommendations for to ensure feasible product can be released within program timing constraints
      • Perform scrap shed analysis and enact countermeasures for non-conformance areas
      • Provide feedback to die build source for optimal die processes and die designs
      • Interact with customer Product teams and Project Management to ensure feasibility of all details within timing requirements
      • Support of cost reduction/value engineering initiatives
      • Use of software, including but not limited to Autoform, Dynaform, Omnicad, CATIA V5 R19, UG NX, and LS Dyna 5.7

      Qualifications:

      • B.S. in Materials Science, Mechanical Engineering, Industrial Systems Engineering, or relevant area of study Graduate degree is preferred
      • 2 – 5 years of experience with Autoform, Dynaform, Omnicad, CATIA V5 R19, UG NX, and LS Dyna 5.7
      • Understanding of modeling concepts that correlates with actual die construction
      • Must be able to collaborate and work in a team environment with a high level of interpersonal skills
      • Must be able to create technical reports and have excellent presentation skills
      • Must have a basic understanding of sheet metal forming principals
      • Keep up to date with latest die processes and tooling trends to maintain industry leading skills
      • Extensive understanding of sheet metal forming principals, materials commonly used in today’s applications and be able to recommend material alternatives based on application and product geometry
      • High level of analytical ability where problem solving is a must
      • Excellent written and verbal communication and presentation skills

      Benefits:

      STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

      We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

      Thanks for taking the time, and we look forward to hearing from you soon.
       
      Job Number: 40026
      Job Location: Auburn Hills, MI
      Rate: DOE
      Per Diem: No
      Overtime: Possible
      Duration: Temp
      Start Date: ASAP
      Input Date: 09/07/2017
      Firm Name: STS AEROSTAFF SERVICES
      Attention: STS AeroStaff Services
      Address: 2000 NE JENSEN BEACH BLVD
      City, State: JENSEN BEACH, FL 34957
      800 Phone: 877/707-5767
      Fax Phone: 877/707-5767
      Website: www.stsaviationgroup.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Diesel Technician - Vehicle Product Validation and Testing

      Description:
      Job Title: Diesel Technician - Vehicle Product Validation and Testing
      Location: Portland, OR 97217
      Duration: 1 2 Months
      Job Details
      • This is a great vehicle diesel technician position that gets you involved in validating of new prototype test vehicles for a major truck manufacture located in Portland, Oregon.
      • Diesel Technicians will work in the vehicles validation and testing department of new up and coming vehicles that are not yet released to be sold. The Validation group responsibilities is to install one off or several prototype mechanical or electrical components for testing and product improvements purposes. You’ll also be doing engine diagnostics of electrical and mechanical components and repairing or replace any component failures on engine, transmission, suspensions, exhaust and other areas of the vehicle when products fail.
      • As a validation diesel technician, you’ll be writing up engineering reports of the vehicle component failures in detail for the engineering validation team to review. You’ll work closely with the mechanical and electrical engineers that are responsible for the components. Verify and go over and validate any component failures or improvements with team members.
      • You’ll also keep current fleet maintained and running well by doing normal scheduled maintenance work such as oil and air filter changes, brake replacements, tire rotations and other normal scheduled maintenance during the validation and testing period of the test fleet.

      Education:
      • Diesel Technician Technical School (or) Associates Degree in Diesel Technician

      Requirements:
      • Must have 2+ years of diesel technician experience
      • Must have your own tools
      • Be a quick leaner
      • Have good communication skills
      • Work well with others.
       
      Job Number: 3410
      Job Location: Portland, ORE
      Rate: DOE
      Per Diem: Possible
      Overtime: Possible
      Duration: 12 Months
      Start Date: ASAP
      Input Date: 09/05/2017
      Firm Name: OLSA RESOURCES INC
      Attention: Sarabjit Saxena
      Address: 3836 N BALLAST ST
      City, State: PORTLAND, OR 97217
      Phone: 503/608-7895
      Fax Phone: 503/608-7896
      Website: www.olsaresources.com

      Digital Design Engineer

      Description:
      The client is an established pioneer in space exploration and military/defense technology. A leader in high technology and engineering services, the client is world renowned for its expertise in the areas of infrared detection and space & missile electronics. As a first-rank engineering and production company, the client is engaged in the design, development, and manufacture of highly-sophisticated electronics equipment that is used in a variety of product areas for government, civil and commercial applications.

      Electrical Engineer to support new product development within the Space Products development team. In this role, you will have the opportunity to be part of a team that designs and implements spacecraft and launch vehicle communication and avionics equipment.

      Responsibilities include digital systems design using VHDL to develop and implement digital wireless receivers, transmitters, transponders, and launch vehicle avionics equipment. Candidates with experience developing algorithms for digital signal processing, forward error correction coding and decoding, encryption/decryption, waveforms and data protocols in FPGAs are desired. System modeling and simulation capabilities utilizing MatLab/ Simulink and ModelSim/Questa tools are preferred.

      The position involves working in teams to generate technical proposals, present at design reviews, perform requirements development, system architecture development, system partitioning, assessing system performance using analysis, simulation, and laboratory testing

      This position requires a BSEE, BSEET, or BSECE degree. We are seeking a candidate with 3 years of demonstrated experience in the specification, design, implementation, simulation, test, verification, validation, and debugging of digital communication systems, avionics systems, and/or control systems. Experience with Actel FPGAs is a plus.
       
      Job Number: 17-779-9286
      Job Location: Midwest
      Rate: $70.00 to $90.00/per hour
      Per Diem: No
      Overtime: Possible
      Duration: 6 mths +
      Start Date: ASAP
      Input Date: 10/17/2017
      Firm Name: AGENTE TECHNICAL
      Attention: Alexa Bui
      Address: 714 CENTERPARK DR STE 140
      City, State: COLLEYVILLE, TX 76034-2852
      Phone: 972/415-4545
      800 Phone: 866/758-2494
      Fax Phone: 866/717-5927
      Email: abui@agentetech.com
      Website: www.agentetech.com