Job Search Results

649 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/12/13 Thursday 08:23AM Pacific Time by ContractJobHunter. )

Listings 1 - 649

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
*******Propulsion Engineer - Part 23/25 *****

Description:
- Design, development, and certification in the area of systems
for new and existing 14 CFR Part 23/25 Aviation aircraft.
- Certification documentation of aircraft hydraulic systems.
- Using computer based drafting tools (CATIA V5 or V6).
- Plus: Experience integrating PT6 turboprop engine.
 
Job Number: 56984712
Job Location: Mid-West
Rate: 60/hr W2
Per Diem: yes
Overtime: Highly probable
Duration: 12 month plus/contract
Start Date: 2 weeks
Input Date: 11/07/2018
Last Updated: 12/13/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

15 Stress Analyst Engineers

Description:
Overview:
Lead and coordinate the stress analysis activities within an assigned aircraft project, establishing and communicating clear task expectations, defining engineering criteria and analysis methods to ensure consistency, and reviewing analysis and reports for accuracy and conformance with requirements.

Skills:
• Education: BS degree.
• 10+ years of aircraft stress/structural analysis experience.
• Experience with aircraft primary and secondary structure.
• Experience with composite and metallic structure.
• Experience with FEA analysis tools such as FEMAP, Nastran, Patran, etc.
• Background working with either commercial aircraft, light aircraft, executive aircraft, UAV’s, rotorcraft, or sport aircraft is acceptable.
• Citizenship: US Citizen, Green Card Holder or Permanent Residence Status

The Structures Company is an AA/EOE.
 
Job Number: 243
Rate: $70-$90/HR. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 12/05/2018
Last Updated: 12/12/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

2 Aircraft Stress Engineers with Composites

Description:
2 Aircraft Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $75-85/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2018
Last Updated: 12/12/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2483 - M&P ENGINEER - cv word doc only

Description:
Support the Engineering, Production and Quality organizations;

Assess various metallic, composite and completion finishing materials (Wood Veneer, Fabric, Leather, etc.);

Engage in engineering development work;

Sign engineering drawings and documentations;

Prepare and approve Test Plans and Test Reports (including flammability);

Perform Trade and Design Studies;

Support various research and development projects;

Create, improve and adapt technical and functional processes;

Take on strategic projects management;

Plan, execute audits, prepare reports and follow up on corrective actions;

Analyze process and systems changes.

University degree in metallurgical, chemical or materials engineering with at least 8 years of pertinent experience (relevant experience in aerospace field is an asset).

Familiar with the materials used in aerospace industry and the manufacturing and application procedures.

Familiar with the typical aerospace and military standards or the aerospace industry standards (e.g.: MIL, SAE specifications, FAA requirements, etc).

Knowledge of the aluminum, composite and aircraft completion finishing materials characteristics as well as their treatment.

You are familiar with flammability certification requirements as per FAR 25.

Practical knowledge and experience of Catia/Enovia V5.

Work under minimum supervision to perform a wide range of technical functions.

Practical knowledge and experience in aircraft structure and completion components.

Customer-oriented with innovative problem solving skills and you are organized.

Strong communication skills both in English (written, spoken) and French (spoken).

Are a team player, working in a multidisciplinary team.
 
Job Number: 2483
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/28/2018
Last Updated: 12/05/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2419 - AVIONICS SYSTEMS INTEGRATOR - cv, word only

Description:
Be responsible, as an Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Client aircrafts.

Be responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate in the Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Client Flight Test Center in development and certification tests: witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Client program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.

University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent.

At least five (5) years of relevant experience with the design, development, integration and certification of Avionics systems.

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Have a good knowledge of RTCA documents DO-178 and DO-160.

Familiar with part FAR25/525 certification process and with the ARP4754 standard.

Experience with civil aircraft and airworthiness authorities.

Are proficient with the use of Microsoft Office software tools to produce presentation and reports.

Have the ability to work well in a team environment.

Have strong communication skills (written and spoken).
 
Job Number: 2419
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/28/2018
Last Updated: 12/05/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2469 - AVIONICS/ELECTRICAL SYS. - AFTERNOON, MIDNIGHT & WEEKEND SHIFT

Description:
Provide Avionics Engineering support to the Client Final Line Assembly during afternoon, midnight and weekend shift.

Witness system functional testing and conduct technical investigations on Electrical and Avionic systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests.

Track and ensure successful implementation of systems installations and modifications.

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes.

Develop good working relationships with various departments within BA and with all suppliers.

Bachelor of Engineering Degree and eligibility for Professional Engineer registration.

AME license is an asset.

Experience in providing engineering support to a Final Line/ Production.

15 years' experience in aircraft electrical systems and or avionics systems (Electrical Generation, Distribution, Lighting, Navigation, Communication, Displays, EICAS, Data Concentration System, AFCS, Stall System, OMS, FDR, CVR etc).

Conversant with design, qualification and certification test requirements of Aircraft Electrical and or Avionic systems.

Have flexibility to travel.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Familiar with Microsoft Office software tools.

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Regular work day, some flexibility required:

Afternoon Shift (3:30 to 12:00) ;

Midnight Shift = (11:00 PM to 6:30 AM);

Weekend Shift = Friday, Saturday, Sunday and Monday.
Friday (3:30 PM -12:00 (midnight)),
Saturday (6:00 AM to 6:00 PM),
Sunday (6:00 AM to 6:00 PM)
Monday (8:00 AM 8 to 4:30 PM)
 
Job Number: 2469
Job Location: Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/28/2018
Last Updated: 12/05/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2471 - PROPULSION/PNEUMATIC SYSTEMS - AFTERNOON SHIFT

Description:
Provide Propulsion/Pneumatic Engineering support to the Client Final Line Assembly during afternoon shift.

Witness system functional testing and conduct technical investigations on Propulsion and Pneumatic systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests

Track and ensure successful implementation of systems installations and modifications

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes

Develop good working relationships with various departments within BA and with all suppliers

Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset

Experience in providing engineering support to a Final Line/ Production

15 years' experience in aircraft Propulsion and/or Pneumatic systems (High and Low Pressure Ducting, Environmental Control System, Avionics Cooling, Oxygen System, Power plant, Fuel systems, etc)

Conversant with design, qualification and certification test requirements of Propulsion and/or Pneumatic systems

Have flexibility to travel.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration

Familiar with Microsoft Office software tools

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Regular work day, some flexibility required:

Regular Shift = Afternoon Shift (3:30 to 12:00) ;
 
Job Number: 2471
Job Location: Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/28/2018
Last Updated: 12/05/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2500 - ELECTROMAGNETIC COMPATIBILITY (EMC) ENGINEER - cv, word doc only

Description:
Responsible at the aircraft and system level for Electromagnetic Compatibility (EMI)/High Intensity Radiated Fields (HIRF)/Lightning Strike/ Electrostatic Discharge technical requirements.

Knowledge of relevant industry standards (RTCA/DO-160, SAE ARP) and high level of familiarity with airworthiness (TCCA, FAA, EASA) Regulations and Advisory Materials pertaining to EMI, HIRF, Lightning and Electrostatic Discharge.

Execute intermediate to complex engineering assignments related to EMI, HIRF, and Lightning and Electrostatic Discharge requirements.

Analyze new systems designs, assess technical impacts, propose EMC compliance approaches, review/approve technical documents, test plans, test procedures and test reports, and check compliance with certification regulations.

Define scope of work for EMC effort of technical/engineering projects, estimate the time required, plan, highlights technical risks and execute according to priorities.

Define technical requirements, test requirements and perform detailed analysis to ensure aircraft and systems compliance to EMC certification regulations.

Prepare EMI, HIRF, Lightning and Electrostatic Discharge test procedures, execute tests in laboratories and on aircraft and generate results and analysis test reports.

Support and witness EMC tests in Canada, United States and Europe as needed.

Master degree in Electrical or EMC Engineering, or alternatively a Bachelor's degree in Electrical or Physics Engineering with a minimum of eight (5) years of experience in aircraft EMC/HIRF/Lightning/Electrostatic Discharge (FAR 25.981 is an asset).

8 years of experience or more in an aerospace manufacturing company.

Have EMC bench and/or aircraft testing experience.

Have a minimum of five (5) years working experience with systems qualification/certification.

Knowledge of harness design, aircraft design principles including familiarity with aircraft regulatory requirements.

Proficient with the use of PC including Microsoft Office software tools.

Energetic person with strong written and oral communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Must be familiar with DO160, STD ARP, MIL STD, FAA regulations, as well as other applicable airworthiness regulations.

Must be able to analyze modifications at aircraft level and check compliance with certification regulations.

Must be able to support and witness EMC tests in Canada, United States and Europe as needed.
 
Job Number: 2500
Job Location: Montreal, Canada
Rate: 52.00
Per Diem: Paid 3 Months only
Overtime: Paid NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 11/28/2018
Last Updated: 12/05/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2504 - LIAISON ENGINEER (MRB)-2504 - cv, word doc only

Description:
Disposition documentation to resolve fit, form or functional issues on A/C components.

Support to Production, Design Engineering, Procurement & Quality in coordinating resolutions to issues.

Review & trouble shooting of A/C Systems in conjunction with design Engineering as required.

Review & disposition of A/C Wiring & Electrical issues in conjunction with Design Engineering as required.

Corrective Action requests involving Engineering as required.

Obtain & Interface with Design Engineering experts on appropriate issue resolution.

Interpret engineering drawings, specs & provide guidance to junior employees.

Provide status, updates & keep current on information regarding manufacturing changes & problems.

Job is located in Toronto and is for weekend afternoon shift coverage

Bachelor or Masters degree in Aeronautical or Mechanical Engineering from an accredited University.

Minimum of ten years MRB experience or design experience in Aerospace

Possess good knowledge of aircraft structure & system installation technical requirements, aircraft materials and hardware, standards and specifications

Electrical & Systems experience as this would be considered an asset

Person with excellent communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment

Have previous CATIA, Design and MRB experience including support to production would be considered an asset.

Have previous experience as a Mentor and Coach in either Liaison team environment or working with problem solving teams is an asset

Are flexible with work schedule as this position requires weekend work on a rotating schedule and some travel and short-term relocation assignments, and it work day is Weekend-Afternoon Shift .
 
Job Number: 2504
Job Location: Toronto, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/28/2018
Last Updated: 12/05/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2505 - SENIOR PROJECT ENGINEER - STRUCTURES - cv, word doc only

Description:
Lead Integrated Product Development Team (IPDT) weekly meetings for your respective systems

Develop, harmonize, maintain and update Schedules for each phase of the Program or for each proposed change post-cert, with the Suppliers and CSALP

Interface with the Project Management group and the Work Package leads, you will be responsible for managing the integration of the work package schedule and ensure that it is harmonized with the overall program schedule and across other work packages

Identify and report Issues and Risks with mitigation plans

Ensure effective delivery, review and approval of all deliverables and datasets in line with the program needs and aircraft deliveries

Ensure compliance to all governing documents and processes

Participate in the problem solving and recovery plans when required to maintain key deliverables' timeline

Bachelor Degree or relevant experience in Project Management in an aerospace environment.

Many years of relevant experience in project management or equivalent.

Ideally have experience in aerospace.

Demonstrate excellent oral and written communication skills.

Have superior skills in MS Office including MS Project, PowerPoint and Excel.

Are a team player with strong communication skills who interfaces well with the many business partners involved.

Must have excellent organisational skills and able to work toward aggressive deadlines.

Must have extensive experience in project management activities (planning, schedule follow up and budget management).

Must have knowledge on implementation of change management activities.
 
Job Number: 2505
Job Location: Mirabel, QC, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 12/05/2018
Last Updated: 12/05/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

3 Aircraft Stress Engineers - Composites

Description:
Aircraft composite stress engineering contractors needed.
MUST BE US PERSONS.
Ability to work in a fast paced environment.
MUST have a good Composites Primary Airframe Structures background.
FAR 23 experience is a huge plus.
Classical hand analysis, Nastran, FEMAP a plus
US PERSONS REQUIRED

Position Responsibilities
This is a Senior Level Contract Stress Analyst position.
General Minimum Requirements:
• Education: MS with 8+ years, or BS with 1O+ years of relevant experience
• Create engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
• Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
• Select appropriate material systems for structures applications and identify all material testing requirements.
• Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
• Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
• Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.

Must be a US Citizen, or Greencard holder.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Manassas, VA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: 12-months+
Start Date: ASAP
Input Date: 11/14/2018
Last Updated: 12/12/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

30 Structural Design Engineers

Description:
Overview:
Must have strong background with aircraft primary and secondary detail design utilizing Catia V5. A composite background with experience working with Catia V5 and CPD is ok, but only if there is experience with metallic structural design.

Position Responsibilities
Under the direction of project design engineering, serve as a member of a design team providing structural layout and detail design for commercial light/general aviation aircraft. The main product line will require design-to-build activities for a commercial (Far 23) aircraft composed of primary/secondary metallic structure (some composite).

Minimum Requirements
·US Citizen, Green Card Holder or Permanent Residence Status
·A degreed candidate is highly desired
·10 years of experience in Aerospace design is a minimum
·6000+ hours experience with CATIA v5 (R25/R26 preferred)
·3D CAD Design using Model Based Definition (MBD)
· Experience with ENOVIA\SmarTeam
· Experience with FAR 23 aircraft much preferred
· Experience with Structural layouts, conceptual/preliminary design phase experience needed.

The Structures Company is an AA/EOE.
 
Job Number: 242
Rate: $60-$80/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: JANUARY 2019
Input Date: 11/26/2018
Last Updated: 12/12/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

6 Structural Design Engineers

Description:
Skill set:
Primary and secondary structural design of light aircraft (FAR 23). First wave will need to have a strong background doing primary airframe structural layout utilizing Catia V5. Later in the program, the focus will be on aircraft primary and secondary detail design utilizing Catia V5. A composite background with experience working with Catia V5 and CPD is ok, but only if there is also experience with metallic structural design.

Position Responsibilities:
Under the direction of project design engineering, serve as a member of a design team providing structural layout and detail design for commercial light/general aviation aircraft. The main product line will require design-to-build activities for a commercial (Far 23) aircraft composed of primary/secondary metallic structure (some composite).

Required:
· 10 years of experience in Aerospace design is a minimum
· 6000+ hours experience with CATIA v5 (R25/R26 preferred)
· Entirely 3D CAD Design using Model Based Definition (MBD)
· Experience with ENOVIA\SmarTeam
· Experience with FAR 23 aircraft much preferred
· Experience with Structural layouts, conceptual/preliminary design phase experience needed.
· US Citizen, Green Card Holder or Permanent Residence Status
· A degreed candidate is highly desired

The Structures Company is an AA/EOE.
 
Job Number: 238
Job Location: VA
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 1-year+
Start Date: October
Input Date: 11/21/2018
Last Updated: 12/12/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

A&P Mechanic

Description:
PDS Tech Inc. is seeking an Aircraft Mechanic, in Saint Augustine, FL.

Summary:
  • Performs a combination of responsibilities consisting of complex mechanical duties in all fields of specialization for the flight line, including power plant, run-in plumbing, hydraulics, rigging, and controls, and structures and surfaces on the complete airplane. 
  • Performs mechanical and operational duties for pre-flight and post-flight service and inspection and/or in preparation of customer acceptance of completed airplanes. 
  • Performs operations such as disassembling, repairing, replacing, rechecking, testing, re-rigging, servicing, and re-installing as necessary. 
  • Operates aircraft power plants and ground equipment during acceptance checks, trouble shooting and routine maintenance of aircraft. 
  • May troubleshoot malfunctions/defects and schedule/modify maintenance procedures. 
  • Maintain practical knowledge of certified aircraft and ground support systems such as controls, fuel, hydraulic, pneumatic, electronic, fire control and armament components.

Basic Qualifications: 
  • High School Diploma/GED plus 4 years of Aircraft Mechanic 3 experience.

Preferred Qualifications: 

  • E2C or E2D aircraft experience.


POC: Clyde (813) 426-9917 or ccallwood@pdstech.com
 
Job Number: 1810090415
Job Location: Saint Augustine, FL
Duration: 0 months
Input Date: 10/23/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mk7pAAA&URLSource=cjhunter

A&P Mechanic

Description:
PDS Tech is seeking A&P Mechanics in Newburgh, NY.
In your role, you will:

  • Performs assembly, disassembly and repairs required in the completion of airframe overhaul, repair or modifications, including but not limited to removal, replacement and repair of parts of engines, airframes and systems.
  • Responsible for helping licensed mechanics set up and tear down the equipment, tools and supplies used during the repair of the aircraft.
  • Required to tow and move aircraft during the performance of maintenance duties.
  • Assists in the cleaning of parts and components during the repair and assembly of aircraft.
  • Performs other tasks and duties associated with the aircraft operation


 

 

 


As our ideal candidate, you will meet the following requirements:
  • Requires high school or equivalent.
  • A&P License with 3-5 years experience.





 

 

 
Job Number: 1810093150
Job Location: Newburgh, NY
Duration: 12 months
Input Date: 10/03/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f6WnAAI&URLSource=cjhunter

A&P Mechanic

Description:
The ideal candidates will perform Depot, Intermediate, and Organizational repairs, upgrades and Modifications to Aircraft product lines and their components. 

Duties to include:

  • Component overhaul and repair
  • Crash damage repair
  • Aircraft and component teardown and evaluation
  • Incorporating ECP's
  • Technical directives, ASAM's ASB's and CSN's
  • Validating and verifying retrofit kit upgrades
  • Administering training to customers

 Must be experienced in:

  • Must have 7-10 years of experience on UH-60 aircraft and an A&P license.
  • Maintenance of flight control systems
  • Fuel
  • Drivetrain
  • Rotor Systems
  • Blueprint Reading and Interpretation

Under a minimal of supervision be able to perform a variety of moderately complex tasks. 
 
 
Job Number: 1810092570
Job Location: Huntsville, AL
Duration: 18 months
Input Date: 09/17/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Sherrita Davis
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f3lsAAA&URLSource=cjhunter

A&P Mechanics

Description:
We have an urgent need for contract Aerospace Mechanics here in Moses Lake, WA. This is a very high paying position. The position also has opportunities to become full time.

Job Duties and Responsibilities

Service, repair, troubleshoot and modify aircraft and aircraft engines.
Repair, replace and rebuild aircraft structures, system and functional components.
Assemble and install electrical, plumbing, mechanical, hydraulic, structural components and accessories using hand tools and power tools.
Adjust, align and calibrate aircraft systems using hand tools, gauges and test equipment, machines and equipment such as shears, sheet metal brakes, welding equipment, pneumatic tools.
Research and understand FAA technical data relevant to assigned tasks.
Maintain the premises in a clean and organized manner.
Remove and/or install aircraft components, test IAW MM, and troubleshoot aircraft systems.


Requirements
Knowledge/Skills/Abilities

Strong knowledge in FAA regulations, Aviation Rules (FOD’s, Safety, Quality, Hazardous Materials, Aircraft Marshalling), aerodynamics, aircraft electrical systems, materials science, aircraft maintenance, electrical testing, instrumentation, gas turbine and piston power plants.
Good leadership (individual contributor) presence:
Able to lead by example and live/work by company values.
Ability to successfully contribute to a positive and productive work environment.
Able to instill a sense of urgency in team members.
Able to be patient and objective in difficult situations with different types of people.
Good customer service tool box:
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong follow-through, quick thinking and resourceful.
Ability to remain calm, cool and collected in stressful situations.
Strong sense of urgency to address and solve important issues.
Good organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Ability to work in a progressive, fast-paced environment (work well under pressure).
Good analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Good communication skills (oral, written) with customers.
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Good interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office, including Word, Excel, Outlook, and PowerPoint.
Education

Associate’s Degree (or Technical School equivalent) in Aircraft Maintenance or related field from an FAA accredited school.
A&P Certificate.
Japanese Bilingual preferred.
Experience

Three (3) plus years of aircraft mechanical experience preferred.
 
Job Location: Moses Lake, WA
Input Date: 10/29/2018
Last Updated: 12/04/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: mcalderon@velocity-cs.com
Website: www.velocity-cs.com

AIRFRAME & POWERPLANT TECHNICIAN

Description:
Johnson Service Group is currently seeking a Airframe & Power Plant Technician to work for our client.

Adjusts, aligns, and calibrates aircraft systems, using hand tools, gauges, and test equipment.
Examines and inspects engines or other components for cracks, breaks or leaks.
Disassembles and inspects parts for wear, warping, or other defects.
Assembles and installs electrical, plumbing, mechanical, hydraulic and structural components and accessories using hand tools and power tools.
Services and maintains aircraft systems by performing tasks, such as flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.
Repairs, replaces and rebuilds aircraft structures, functional components, and parts, such as wings and fuselage, rigging and hydraulic units.
Reads and interprets manufacturers and airline’s maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components
Tests engine operating, using testing equipment to locate source of malfunction.
Minimum Education, Licensure, or Certification (or Substitute Experience) Required:

Airframe and Power plant License Required, high school diploma or equivalent required.
Basic knowledge of operating a personal computer or laptop.
Knowledge of job-specific machines and tools, including their designs, uses, repair, and maintenance.
Capable of repairing machines or systems using the needed tools
Ability to determine the kind of tools and equipment needed to do a job
Able to perform routine maintenance on equipment and determine when and what kind of maintenance is needed.
Capable of determining causes of operating errors and deciding what to do about it.
Able to perform tests and inspections of products, services or processes to evaluate quality or performance.
Able to install equipment, machines, wiring, or programs to meet specifications
Ability to control operations of equipment or systems
Ability to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Able to monitor gauges, dials or other indicators to make sure a machine is working properly.
Minimum Experience Required:

Minimum 1-2 years’ experience performing scheduled and unscheduled maintenance to include: 12/24/36/72 month inspections on charter and/or corporate mid-size jets.
Gulfstream model experience preferred.
 
Job Number: 368921
Job Location: Van Nuys, CA.
Per Diem: If Qualified
Overtime: Possible
Duration: Temp-Direct
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 12/09/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

Acft Painter I

Description:
PDS Tech is seeking a RS Acft Painter I  for an open position in Savannah, GA.

The Aircraft Painter I prepares the aircraft for paint related operations by performing tasks safely within schedule while meeting quality expectations. 

Principal Duties and Responsibilities 

Essential Functions: 1. Mask, sand, and prepare aircraft for paint application. 2. Apply glazing and sealing compounds in preparation for final painting. 3. Operate and maintain all types of preparation and priming equipment. Mix paints and primers. 4. Perform leading edge sealant work in final detail. 5. Comply with all safety, 5S, and housekeeping policies. Use personal protective equipment and ensure aircraft interior is protected (PTP). 

Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned. 2. Comply with Paint shop standard practices. 3. Perform other duties as required. 

Other Requirements: 1. Ability to read, write, speak, and understand the English language. 2. Ability to read and interpret blueprints and engineering documentation. 3. Able to pass Pulmonary Function Test to obtain respirator certification. 4. Ability to use tools, equipment, and materials in the aircraft painting process. Able to climb ladders and stairs, perform close tolerance work, work in small spaces lift up to 40 pounds and work any shift. 5. Must be computer literate.
 


 

Education and Experience Requirements: 



  • High school diploma/GED.
  • One (1) year of painting experience.
  • A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics).
  • Must be able to work any shift when required and to work well with a team


Unique Skills:



Must be able to work well with a team and able to work any shift.



 


 

 
Job Number: 1810094669
Job Location: Savannah, GA
Duration: 6 months
Input Date: 10/26/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qxswQAA&URLSource=cjhunter

Administrative Assistant - Flight Maintenance Group

Description:
Job Description

We are searching for a dedicated and passionate Administrative Assistant to work with the Flight Maintenance Group on a new exciting aircraft project in Moses Lake, WA.


Role Description

Translate and interpret between English and Japanese for work instruction documentation and attending meetings.
Assist in the management (Ordering, inventory, etc.) of office supplies and work tools.
Establishes, develops, maintains and updates filling system for management.


Requirements
Japanese Language skills are required.
Data input to Microsoft office excel, word document by PC (General skill).
 
Job Location: Moses Lake, WA
Input Date: 08/15/2018
Last Updated: 12/04/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: smclignsey@velocity-cs.com
Website: www.velocity-cs.com

Adv Compos Tech II

Description:

PDS is seeking an Advanced Composite Tech II for an open position in Tulsa, OK

Position Purpose:



Under minimal supervision, perform one or more of the following composite part manufacturing functions: complex lay-up, cutting, bagging, autoclave, trimming, and/or complex repairs, in a production environment. Provide specialized technical assistance and interact with team members to resolve manufacturing issues.

Essential Functions:
1. Manufacture a wide variety of composite aircraft parts to meet manufacturing specifications, in a team oriented work environment. 2. Demonstrate the ability to meet the requirements of the Manufacturing Competencies at the appropriate level in the Employee Effectiveness Review. 3. Proficient at reading work orders, blueprints, specifications, lofts, sketches and operation sheets to determine sequence of operations. 4. Must be skilled in the use of special tools and equipment to include precision measuring devices such as 6" scale, 1" micrometer, 6" dial caliper. 5. Check all work and ensure a defect free assembly prior to inspection. 6. Maintain and use all logs and records. Example: MIR sheets, DMTs, Crabs, PCOs, DR/DI, etc. 7. Maintain a neat and orderly work area, support the company FOD and 5S programs, and comply with all safety regulations. 8. Support Lean activities. 


Additional Functions: 1. Perform other duties as assigned. 


Education and Experience Requirements:


High School graduate or GED. Basic computer skills.
TWO (2) years of related composite experience.
Ability to work with composite resins and materials.
Requires ability to read and interpret blueprints.
Must be able to use mathematical formulas to solve dimensional problems using fractions and decimals.



Other Requirements: 1. Must be able to meet the physical requirements of the position. 2. Must be able to work any shift.
 
 
Job Number: 1810092573
Job Location: Tulsa, OK
Per Diem: No
Duration: 0 months
Input Date: 09/27/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f3m7AAA&URLSource=cjhunter

Adv Compos Tech III

Description:

PDS is seeking an Advanced Composite Tech III for an open position in Tulsa, OK

Position Purpose:



Under minimal supervision, perform one or more of the following composite part manufacturing functions: complex lay-up, cutting, bagging, autoclave, trimming, and/or complex repairs, in a production environment. Provide specialized technical assistance and interact with team members to resolve manufacturing issues.

Essential Functions:
1. Manufacture a wide variety of composite aircraft parts to meet manufacturing specifications, in a team oriented work environment. 2. Demonstrate the ability to meet the requirements of the Manufacturing Competencies at the appropriate level in the Employee Effectiveness Review. 3. Proficient at reading work orders, blueprints, specifications, lofts, sketches and operation sheets to determine sequence of operations. 4. Must be skilled in the use of special tools and equipment to include precision measuring devices such as 6" scale, 1" micrometer, 6" dial caliper. 5. Check all work and ensure a defect free assembly prior to inspection. 6. Maintain and use all logs and records. Example: MIR sheets, DMTs, Crabs, PCOs, DR/DI, etc. 7. Maintain a neat and orderly work area, support the company FOD and 5S programs, and comply with all safety regulations. 8. Support Lean activities. 


Additional Functions: 1. Perform other duties as assigned. 


Education and Experience Requirements:


High School graduate or GED. Basic computer skills.
Three (3) years of related composite experience.
Ability to work with composite resins and materials.
Requires ability to read and interpret blueprints.
Must be able to use mathematical formulas to solve dimensional problems using fractions and decimals.



Other Requirements: 1. Must be able to meet the physical requirements of the position. 2. Must be able to work any shift.
 
 
Job Number: 1810092566
Job Location: Tulsa, OK
Per Diem: No
Duration: 0 months
Input Date: 09/28/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f3lEAAQ&URLSource=cjhunter

Aeronautical Engineer

Description:
Our client is looking for an Aeronautical Engineer in Palmdale, California! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Development, test, and validation of new and modified subsystem designs.
* Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
* Creation and or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
* Coordination with suppliers, internal and external integrated product teams, management and the customer.
* Technical engineering support for manufacturing, installation and testing at Lockheed Martin, external supplier facilities and the customer’s operating locations.
* May function in a project leadership role where they manage system performance, budget and schedule.
* Apply technical principles, theories and concepts to integrate systems that may include: avionics, fuel, hydraulics, secondary power and environmental control for advanced air vehicles.
* Coordinate efforts across a wide range of functional organizations, such as Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Mandatory Qualifications and Experience:
* Secret Security Clearance with re-investigation date within the last 5 years
* 6+ years of CATIA experience
* 6+ years of Geometric Dimensioning and Tolerancing (GD&T) experience

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129294
Job Location: Palmdale, CA
Duration: 1 year
Start Date: ASAP
Input Date: 11/27/2018
Last Updated: 12/04/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Email: resumes@teamglobal.com
Website: www.teamglobal.com

Aeronautical Engineer

Description:
Location: Palmdale, CA
Rate: DOE
Duration: 1 year W2 contract
Shift: 9/80-A
Per Diem Split: Yes (if eligible)
Overtime: Possible

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '


Required Skills:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****
- Catia V5 experience is required.
- Airframe experience is required.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.

Education:
- BS+9-15 YRS or MS+7-13 YRS required.
 
Job Number: 9610
Job Location: Palmdale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 12/04/2018
Last Updated: 12/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Aeronautical Engineer - Clearance / Catia V5 airframe design composites Fibersim CA

Description:
1090-1 Aeronautical Engineer / Catia V5

Work Location: Palmdale, CA
Status: Open

Qty: 4
Desired Start Date: 8/13/2018
End Date: 8/30/2019

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe experience is required.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS

Experience
Areas of Expertise CATIA 4 - 6 Years
Areas of Expertise Composites and Materials 2 - 4 Years
Work Schedule: 9/80-A

2+ (4,000 hrs) CATIA V5 Experience Highly desired
Will accept qualified experience in lieu of degree.
 
Job Number: JE-1090-1S5
Job Location: Palmdale, CA
Rate: 70/hr DOE
Per Diem: no
Duration: 12 months
Input Date: 11/27/2018
Last Updated: 12/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aerospace Buyer and Procurement Specialist

Description:
We are searching for a dedicated and passionate aerospace buying and procurement specialist to work on a new exciting aircraft project in Moses Lake, WA.


Role Description
Coordinate with Vendors, purchasing goods, receiving goods, accounting goods.
Develop and analyze procurement data.
Resolve material discrepancy with internal customers and suppliers.
Resolve invoice discrepancies.
Place inventory replenishment/purchase orders and trace, to proactively meet customer requirements, follow-up and expedite as required.
Analyze company & customer inventory for procurements and recommendations; control and plan inventory to maximize customer service and achieve turn targets.


Requirements
Qualifications
Must have formal purchasing/supply chain management training at a recognized institution or equivalent experience in an aerospace purchasing/supply chain environment
Needs to be able to work with Japanese expats.
Ability to analyze inventory requirements using company computer systems.
Ability to research and analyze procurement data and develop alternate sources.
Must have strong verbal and written communication skills including a professional telephone manner.
Must be a self-directed team player and be able to carry out the duties of the position with minimum supervision in a team environment.
Must have good organizational, analytical and negotiation skills.
An understanding of accounting principles and accounts payable would be an asset.
 
Job Location: Moses Lake, WA
Input Date: 08/15/2018
Last Updated: 12/04/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: mcalderon@velocity-cs.com
Website: www.velocity-cs.com

Aerospace Engineer - Air Systems

Description:
  1. Support Flight Testing Activities, including but not limited to:
    1. Discuss and review test plans and preparation activities.
    2. Help determine test specifications (based upon system architecture).
    3. Attend Ground/Flight Test briefing and debriefings
    4. Participate in Test Readiness Reviews and ensure on-time Engineering deliverables.
    5. Generate developmental engineering drawings and instrumentation change requests as required.
    6. Monitor live flight data, typically via telemetry, during flight test on aircraft.
    7. Create and review Aircraft Restrictions
    8. Create and review Aircraft Troubleshootings
    9. Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
    10. Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
    11. Process, analyze, and draw conclusions from post flight data.
    12. Identify non-conformances, quality escapes, etc. to create rejection tags.
    13. Make assessments to ensure safety of flight determination.
    14. Document flight test design problems for long term fix.
    15. Generate and review appropriate limitations documentation.
    16. Write flight test results reports.

  2. Complete special projects and tasks assigned by Group Lead.

  • Level Requirements (Minimum):
    Education
     
  • Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation). 
    • Other Engineering fields may be considered.

  • Experience
     
  • Four (4) years aerospace engineering experience in air systems, including experience in aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.



Knowledge/Skills/Abilities:
 
  • Strong knowledge of flight test operations and flight certification, including knowledge of aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.
  • Good leadership presence as well as people management skills: 
    • Future-oriented in thinking and operation.
    • Able to lead by example and live/work by company values.
    • Ability to successfully contribute to a positive and productive work environment.
    • Able to instill a sense of urgency in team members.
    • Able to be patient and objective in difficult situations with different types of people.

  • Strong skill set for: 
    • Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
    • Strong follow-through, quick thinking and resourceful.
    • Ability to remain calm, cool and collected in stressful situations.
    • Strong sense of urgency to resolve the issue.

  • Strong organizational, time management and prioritization skills:
    • Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
    • Able to be flexible with attention and priority.
    • Ability to work in a progressive, fast-paced environment (work well under pressure).

  • Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
  • Strong communication skills (oral, written, presentation) with both external and internal team.
    • Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
    • Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
    • Excels at communicating clearly and effectively verbally. Strong proficiency in writing summaries, documents, reports, and presentations.
    • Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
    • Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
    • Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems. 
    • Proven track record of improving the efficiency of assigned processes or procedures.
       
       


 
Job Number: 1810087672
Job Location: Seattle, WA
Duration: 6 months
Input Date: 06/27/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mYpuAAE&URLSource=cjhunter

Aerospace Engineer - Avionics

Description:
The Aerospace Engineer, Avionics position located here in Moses Lake, WA is responsible for supporting for the focal avionic systems engineer in developing, testing and certifying systems for a project. This role requires the significant exercise of independent discretion and judgment in matters of significance.


Job Duties and Responsibilities:

Review and support Avionics Certification Activities.
Create and review Certification Plans.
Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Reports.
Review qualification by similarity and/or analysis reports.
Review system safety documents (PSSA, SFHA, ADHA, SSA and Particular Risk Analysis).
Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
Perform Component Drawing Reviews.
Complete aircraft assembly and installation drawing reviews.
Participate in System Design Reviews.
Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
Coordinate with certification authorities to seek clarification on requirements.
Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.
Create, review and approve interface control documents and any sub level writing interface documents.
Support Avionics Flight Testing Activities, including but not limited to:
Discuss, write and review test plans and preparation activities with flight test team.
Help prepare and review pre and post flight briefing.
Monitor live flight data, typically via telemetry, during flight test on aircraft.
Process, analyze, and draw conclusions from post flight data.
Make assessments to ensure safety pf flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate limitations documentation.
Complete special projects and tasks assigned by Group Lead.



Requirements
Knowledge/Skills/Abilities

Knowledge of system development activities and flight certification activities, including knowledge, skills and competency with avionic systems utilized in vehicle design (Comm/Nav/Surveillance/FMS/Displays/Recorders/CPDLC/CAS/antenna installations/VHF).
Good leadership presence as well as people management skills:
Future-oriented in thinking and operation.
Able to lead by example and live/work by company values.
Ability to successfully contribute to a positive and productive work environment.
Able to in still a sense of urgency in team members.
Able to be patient and objective in difficult situations with different types of people.
Strong customer service tool box:
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong follow-through, quick thinking and resourceful.
Ability to remain calm, cool and collected in stressful situations.
Strong sense of urgency to resolve customer needs.
Strong organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Ability to work in a progressive, fast-paced environment (work well under pressure).
Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Strong communication skills (oral, written, presentation) with both external and internal customers.
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
Excels at communicating clearly an effectively verbally, Strong proficiency in writing summaries, documents, reports, and presentations.
Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all level of the organization.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems.
Proven track record of improving the efficiency of assigned processes or procedures.
Education

Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Other Engineering fields may be considered.
Experience

Aerospace engineering experience in Electrical Systems, including experience in the electrical aspects of the various systems and components and/or controllers on the airplane (Comm/Nav/Surveillance/FMS/Displays/Recorders/CPDLC/CAS/antenna installations/VHF)
 
Job Location: Moses Lake, WA
Input Date: 07/17/2018
Last Updated: 12/04/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: mcalderon@velocity-cs.com
Website: www.velocity-cs.com

Aerospace Engineer - Electrical Systems

Description:
Role Description

The Aerospace Engineer, Electrical Systems position located here in Moses Lake, WA is responsible for supporting for the development, testing and certification of the electrical aspects of the various systems and components and/or controllers on the airplane (e.g. ECS, fuel, hydraulics, engines, fire protections, anti-ice, lights, electrical power, wiring, etc.). The role requires the significant exercise of independent discretion and judgment in matters of significance.



Job Duties and Responsibilities:

Review and support Certification Activities.
Create and review Certification Plans.
Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Plans.
Review qualification by similarity and/or analysis repots.
Review system safety documents (PSSA, SFHA, ADHA, SSA and Particular Risk Analysis).
Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
Perform Component Drawing Reviews.
Complete aircraft assembly and installation drawing reviews.
Participate in System Design Reviews.
Coordinate with suppliers.
Coordinate with certification authorities.
Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.
Support Flight Testing Activities, including but not limited to:
Help determine test specification definition.
Discuss, write and review test plans and preparation activities with flight test team.
Help prepare and review pre and post flight briefing.
Monitor live flight data, typically via telemetry, during flight test on aircraft.
Process, analyze, and draw conclusions from post flight data.
Identify non-conformances, quality escapes, etc. to crate rejection tags.
Make assessments to ensure safety pf flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate limitations documentation.
Write flight test result reports.
Electrical Systems.
Creating instrumentation definitions for the electrical systems (locations of instrumentation, sample rates, unit definitions, etc.)
Release of engineering documentation for component changes and new installation, ensuring appropriate configuration control
Complete special projects and tasks assigned by Group Lead.


Requirements
Knowledge/Skills/Abilities

Knowledge of flight test operations and flight certification, including knowledge of electrical aspects of the various systems and components and/or controllers on the airplane.
Good leadership presence as well as people management skills:
Future-oriented in thinking and operation.
Able to lead by example and live/work by company values.
Ability to successfully contribute to a positive and productive work environment.
Able to instill a sense of urgency in team members.
Able to be patient and objective in difficult situations with different types of people/
Strong customer service tool box:
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong follow-through, quick thinking and resourceful.
Ability to remain calm, cool and collected in stressful situations.
Strong sense of urgency to resolve customer needs.
Strong organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Ability to work in a progressive, fast-paced environment (work well under pressure).
Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Strong communication skills (oral, written, presentation) with both external and internal customers.
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
Excels at communicating clearly an effectively verbally, Strong proficiency in writing summaries, documents, reports, and presentations.
Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all level of the organization.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems.
Proven track record of improving the efficiency of assigned processes or procedures.
Education

Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Other Engineering fields may be considered.
Experience

Aerospace engineering experience in Electrical Systems, including experience in the electrical aspects of the various systems and components and/or controllers on the airplane (e.g. ECS, Fuel, hydraulics, engines, fire protections, anti-ice, lights, electrical power, writing, etc.).
 
Job Location: Moses Lake, WA
Input Date: 07/17/2018
Last Updated: 12/04/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: mcalderon@velocity-cs.com
Website: www.velocity-cs.com

Aerospace Engineer, Powerplant & FIFA

Description:
The Aerospace Engineer, Powerplant & FIFA position is responsible for supporting the development and TC test pertaining to the Propulsion System including the Nacelle and Engine Build-up (EBU), Auxiliary Power Unit (APU), and the Aircraft Fuel System. 
 
Job Duties and Responsibilities:

Support Flight Testing Activities, including but not limited to:
  1. Discuss and review test plans and preparation activities.
  2. Help determine test specifications (based upon system architecture).
  3. Attend Ground/Flight Test briefing and debriefings
  4. Participate in Test Readiness Reviews and ensure on-time Engineering deliverables.
  5. Generate developmental engineering drawings and instrumentation change requests as required.
  6. Monitor live flight data, typically via telemetry, during flight test on aircraft.
  7. Create and review Aircraft Restrictions
  8. Create and review Aircraft Troubleshootings
  9. Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
  10. Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
  11. Process, analyze, and draw conclusions from post flight data.
  12. Identify non-conformances, quality escapes, etc. to create rejection tags.
  13. Make assessments to ensure safety of flight determination.
  14. Document flight test design problems for long term fix.
  15. Generate and review appropriate limitations documentation.
  16. Write flight test results reports.

Complete special projects and tasks assigned by Group Lead.
Knowledge/Skills/Abilities:
  • Strong Knowledge of flight test operations and flight certification, including:
    • Propulsion System Integration and Certification.
    • APU and Tailcone Integration and Certification.
    • Compliance to requirements for; Powerplant / APU Installation, Engine Oil and Fuel System, FADEC, Engine Operating Characteristics, Negative G, Rotorlock Screening, In-flight Restarts, Engine Performance, Cooling and Ventilation, Drainage, Engine / APU Inlet Distortion, Water Ingestion, Fireworthiness, and Thrust Reverser Endurance.
    • Aircraft Fuel Systems Design, Integration and Certification.
    • Experience with; Fuel Vent System, Negative G, Cold Soak / Cold Weather Operation, Ullage and Sump Volume, Fuel System Performance, and Fuel Icing Rig.
    • Well versed with 14 CFR Part 25 and EASA CS-25 certification process.

  • Good leadership presence as well as people management skills: 
    • Future-oriented in thinking and operation.
    • Able to lead by example and live/work by company values.
    • Ability to successfully contribute to a positive and productive work environment.
    • Able to instill a sense of urgency in team members.
    • Able to be patient and objective in difficult situations with different types of people.

  • Strong skill set for:
    • Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
    • Strong follow-through, quick thinking and resourceful.
    • Ability to remain calm, cool and collected in stressful situations.
    • Strong sense of urgency to resolve the issue.

  • Strong organizational, time management and prioritization skills:
    • Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
    • Able to be flexible with attention and priority.
    • Ability to work in a progressive, fast-paced environment (work well under pressure).

  • Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
  • Strong communication skills (oral, written, presentation) with both external and internal team.
    • Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
    • Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
    • Excels at communicating clearly and effectively verbally. Strong proficiency in writing summaries, documents, reports, and presentations.

  • Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
  • Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
  • Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems. 
  • Proven track record of improving the efficiency of assigned processes or procedures.

 
Level Requirements (Minimum):
Education


  • Four (4) year degree in Engineering (Aerospace or Mechanical). 

    • Other Engineering fields may be considered.


Experience

  • Four (4) years aerospace Relevant aerospace engineering experience in propulsion systems including the Nacelle and Engine Build-up (EBU), Auxiliary Power Unit (APU), and the Aircraft Fuel System.

 
Travel (flying and driving) to various domestic and international worksites and client offices are required.  Frequent travel required to the Moses Lake Facility for extended periods of time during scheduled flight test operations.
 
 
Job Number: 1810088065
Job Location: Moses Lake, WA
Duration: 24 months
Input Date: 07/04/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002maMWAAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Quality Inspectors

Description:
STS Technical Services is hiring Aerospace Quality Inspectors in Hawthorne, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Job Summary:

To ensure the repair stations operations are conducted in accordance with the pertinent FAA Regulations, CHEP’s Quality Manual/Procedures, Customer Air Carrier Requirements and is designated with final airworthiness determination.

Major/Key Accountabilities:

The Chief Inspector will have the final airworthiness authority for the release, as airworthy, of the units the repair station is rated to repair and maintain
Responsible for ensuring all articles delivered to and maintained by the repair station are properly recorded and staged from receipt to delivery in their airworthy/serviceable condition
Managing and delegating to the repair stations inspection staff ensuring the quality and production needs are maintained
Perform, and have oversight of inspection personnel/activity, including Preliminary, Hidden Damage, In-Progress and Final inspections/RTS of aircraft articles processed by the Repair Station and assuring proper recording of results
Ensure compliance with pertinent FAA regulations, manufacturer’s technical data/approved supplements, RSM/QCM and customer requirements
Report all quality related issues to the QA Manager as soon as the Facility Manager is advised and ensure corrective actions are implemented
Confirm that all equipment being maintained by the repair station is on the Capabilities List, the proper data is available and in use, the staff is properly trained and all records of work/release are complete/accurate
Perform duties delegated by Quality Assurance Manager
Directly responsible for the compliance with the FAA Approved training program manual; including indoctrination, initial, recurrent, ongoing, semi-annual, and specialized training
Ensure any applicable Airworthiness Directive are posted and are being used and verify compliance with all other supplements, approvals, requirements
Submit reports of defect or un-airworthy condition to the “Service Difficulty Reports”
Assume all duties and responsibilities detailed in the RSQCM to include; calibration program, shelf life program, internal auditing, BER/scrap, work turn over, suspected unapproved parts, salvage parts program and incoming goods
Performing semi-annual internal audit of the repair station and any approved contractors
Coordinate with station manager inspection requirements
Ensure and assist in all areas of the Safety Program and Zero Harm Program to ensure that they are fully enforced and by all CHEP employees
Provide feedback/suggestion to improve customer satisfaction
Communicate with customers and regulatory agencies during audits or visits
Ensure system security of our FAA approved electronic recordkeeping system regarding their area/s of responsibility
Maintain safe and clean work environment

Measures:

Overseeing the quality of products in accordance with monthly budgeted production goals
Maintaining quality standard in accordance with the regulations, customer requirements and internal procedure
Establishing a quality and compliance system which will result in no major audit finding
Equipment rejection rates shall be at 98% or higher
Maintaining positive MTTR
Contributing to positive MOP by controlling wastes
Enforcing the CHEP Zero Harm Culture and goals
Authority/ Decision Making:
According to the company matrix

Qualifications:

Appropriately certificated under Part 65 (A&P or FAA Repairman)
A&P License REQUIRED
Ability to work in a high activity/fast paced environment while managing associated stress
Possesses excellent organizational skills and ability to work independently
Organize responsibilities of the inspection staff and delegate duties to properly qualified inspection personnel
Effectively execute training in accordance with the Approved Training Program and internal requirements
Ability to make quality decisions and effectively solve problems
Strong verbal and written communication skills, including the ability to facilitate meetings and effectively lead groups
Ability to build and maintain effective working relationships with all levels of management and staff
Ability to lift, pull, and push in excess of 65 lbs
Must be able to read, write and understand the English language
Confident personality with the ability to interface/communicate with the authorities and customers
Experience in performing Audits
Strong knowledge of FAA regulations and Part 145 requirements
Competent in reading and interpreting manuals, drawings, policies
Good communication and punctuation skills
Computer literacy and familiar with Microsoft office
Ability to learn new software programs and systems

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 43601
Job Location: Hawthorne, CA
Duration: Contract
Input Date: 11/08/2018
Last Updated: 11/15/2018
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Stress Analyst Secret Cleared (549)

Description:
*This is a 1 year or more contract position located in Orlando*
*Must have an Active Secret Clearance in order to start position*



We are seeking a contract stress analyst or structures engineer who will be working on flight vehicle (fixed or rotary wing) on aircraft and/or missiles applying knowledge to dynamics and stress of flight of different materials upon vehicles. Models will be put into simulations, and need top pass physical as well as environmental conditions analysis, using linear/non-linear methods.



Candidate will be testing, analyzing, and modifying existing aircraft and integrating modified components into airborne vehicles. The applicant will be a lead analyst, and as such, in addition to normal stress analysis duties, will also will analyze and write documentation using military specifications, internal structural manuals, developing working models, etc.



Required:
*Current Active Secret Clearance
*5+ years’ experience in stress/structural analysis of aircraft using MSC or Nastran
*Good FEA, FEMAP, IDEAS (or NX/ANSA) skills.
*Knowledge of hand analysis.
*4 year Mechanical Engineering degree
 
Job Number: 549
Job Location: Orlando, FL
Input Date: 12/03/2018
Last Updated: 12/12/2018
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Tooling Design Engineers III

Description:
STS Technical Services is now Hiring Aerospace Tooling Design Engineers III in Savannah, Georgia!

Position Summary:
Performs engineering work related to the design of complex tools and equipment used in the manufacture and support of company aircraft.

Essential Duties & Responsibilities:
Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of company aircraft
Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures
Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers
Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures
Write complex procedures on use of tools
May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives
Additional Functions:
Actively works to improve daily processes, and ensures all work meets customer requirements
Assist Tool shop as needed, during Periodic and Conformity Inspections
Assist in formulating Tool Design policies, procedures, and specifications as required
Perform other duties as assigned

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering (a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job)
Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment
Tool Design experience required

Benefits:
STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 44493
Job Location: Savannah, GA
Duration: Contract
Input Date: 11/08/2018
Last Updated: 11/15/2018
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Assembly Technician

Description:
PDS Tech is seeking an Aircraft Assembly Technician for an open position in Mesa, AZ.
In your role, you will:

  • Assemble, disassemble, install, test and troubleshoot mechanical and electrical assemblies and subassemblies on aircraft systems.

    Follow computer based and other specific processes and systems, including manufacturing planning, wiring diagrams, system schematics, process specifications, engineering sketches, and other forms of written and oral instructions. Follow specific tool control, FOD control and safety guidelines and policies.

High School Diploma or GED
At least 2 – 3 years recent experience with mechanical, electrical/avionics, sheet metal or composites on aircraft systems. Need experience and proficiency in any or all of the following: Flight Control systems (build, install and rig), Fuel system installations, Avionics, aircraft wire installation, Engine (build and install), Canopies and Doors. Rotorcraft experience preferred. A & P License preferred.
 
Job Number: 1810088233
Job Location: Mesa, AZ
Duration: 12 months
Input Date: 09/06/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mindy Moore
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mb79AAA&URLSource=cjhunter

Aircraft Controller

Description:
We are searching for a dedicated Aircraft Controller for a position located in Moses Lake, WA.

Report to Flight Test Team (FTT) Manager and Aircraft Controller Group Lead.
Maintain and facilitate Flight and Ground Testing Schedules.
Ensure scheduled and unscheduled maintenance is assigned in Work Packages and accomplished within calendar, flight-hour and flight cycle limits as specified in AMOS Program.
Review all Work Steps in Work Orders are finalized before assigning to Work Packages.
Review all Completed Work Orders are properly dispositioned before Aircraft Release.
Collect appropriate signatures for Flight Release once all active Work Orders and Work Packages are Completed and Closed.
Review all deferred Work Orders before de-assigning from Work Packages with proper disposition statements.
Provide appropriate Work Tasks to Partnering Companies.
Track outstanding Work Orders and pursue on dispositioning the Open Work Orders.
Ensure any Trouble Reports are being materialized and dispositioned in a timely manner.
Coordinate with FTT and Deputy Managers on upcoming Aircraft activities and assign to the Down Time Modification Work Packages.
Coordinate with affiliated groups to schedule Down Time Work Package through Maintenance Readiness Review (MRR) Meetings.
Create Briefing Materials to provide to Flight Operation Group (FOG) prior to Briefing Meeting.
Coordinate and communicate with all affiliated groups to schedule and obtain proper Work Order disposition on a timely manner.
Attend the following Daily Meetings: Daily Morning Meeting (DMM), Maintenance Hand Over Meeting, MRR, Briefing and Debriefing.
Travel with Aircraft to support Flight Test.


Requirements
Follow FAA and JCAB Regulations.
Can adapt in Flight Test environment.
Can adapt in using AMOS Program and Company Programs.
Proficient in Microsoft Office Programs (Word, Excel, Power Point, Outlook, etc.).
Familiar with Aircraft Maintenance, Engineering Orders, Quality Assurance and Airport Operations.
Travel domestically and internationally on short term notice.
Flexible working hours.
Maintain confidentiality of sensitive information.
 
Job Location: Moses Lake, WA
Input Date: 07/31/2018
Last Updated: 12/04/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: smclignsey@velocity-cs.com
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Data Entry Operators

Description:
STS Technical Services is currently hiring Aircraft Data Entry Operators for open positions in Denver, Colorado.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Job Summary:

The Aircraft Data Entry Operators will oversee all aspects of Records retention, maintaining accurate records for each aircraft and components. Audit online records and approved maintenance record database daily, ensuring all maintenance entries are accounted for and accurate. Organizes and reviews all aircraft data relating to the TCI, aircraft flight times, aircraft log pages, and maintenance activities that have been performed on the aircraft to ensure proper airworthiness in accordance with CFRs.

Job Duties:

Ensure the accuracy and completeness of all records; update databases for lease return and induction activities; Scan or upload all documentation to the ERRP.
Read & interpret technical data, to be input in the maintenance database, as required.
Ensure all maintenance records received into Aircraft Records are entered into approved maintenance record database daily.
Scan, Audit, and index all documents into the ERRP to comply with the FARs.
Audit the documentation for accuracy and completion as outlined in the GMM & FARs.
Accurately track all serialized components on the aircraft.
Record hours/cycles daily; correct aircraft hours and cycles on parts tags, EOs, ADs, FCDs, and A-Checks for accurate data input into the Maintenance database.
Enter component removal and replacement in the maintenance database; ensure that part numbers and serial numbers are accurate.
Perform other duties as required or directed from supervisor of the department.

Qualifications:

High school diploma or GED & the ability to interpret technical data.
Four years of aircraft related work & familiarity with Aviation terminology.
Effective oral and written communication skills.
Must demonstrate behavior that portrays the company core values of Safety, Respect, Trust, Collaboration, Value, and Passion while communicating with personnel and acting on behalf of the company.
Preferred - Experience with aircraft MRO systems & Experience with electronic records management systems.
Preferred - Previous aircraft records experience.

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 35489
Job Location: Denver, CO
Duration: Contract
Input Date: 11/08/2018
Last Updated: 11/15/2018
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Door Design Engineer

Description:
General Summary:
Engineer, Doors Design is responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with a minimum of 10 years directly related experience designing aviation systems; experience can be substituted for the lack of an appropriate degree
2. Some Travel may be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.


The Structures Company is an AA/EOE.
 
Job Number: 217
Job Location: Greensboro, NC
Rate: $50-$60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 10/05/2018
Last Updated: 11/14/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interior Design Engineer

Description:
General Summary:

The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. This includes requirements definition for the entire interior including liners, monuments, and seats. Familiarity with FAA certification requirements pertaining to aircraft interiors and human factors is desired. The individual will also support production aircraft completions and supply chain as needed to clarify requirements and provide dispositions to engineering deviations. Most important is the desire to work as a key contributor to the overall engineering organization and provide our customers with the world’s most advance aircraft.

Duties and Responsibilities:
• Creates conceptual designs for interiors of the aircraft through 3D modeling software (CATIA), drawings, and/or drafting application
• Develops designs for form/fit/function to meet customer and design criteria
• Provides designs for the fabrication process including sheet metal, extrusions and inject molding
• Familiarity with structural analysis methods, load paths, and material properties
• Validates engineering designs per engineering core principles, design standards, processes and industry best practices
• Makes recommendations to engineering lead/management
• Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes
• Ensures adherence to program schedule

• Education, Work Experience, Certification and/or Licensure:
• Bachelors’ degree in an engineering field of study from a four year college or university is required. (In lieu of degree, management may elect to consider individuals with a equivalent years of combined experience and training)
• Masters’ degree in Engineering preferred
• Minimum of 15 years engineering design experience directly related to mechanical/interior design required.

The Structures Company is an AA/EOE.
 
Job Number: 248
Job Location: NC
Rate: $55/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: November
Input Date: 10/29/2018
Last Updated: 12/01/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Loads Engineer

Description:
General Summary:

Responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.

Duties and Responsibilities:
Applicant must be able to define and validate aircraft flight and ground loads through simulation/calculation using established theory and methods


Qualifications
Education, Work Experience, Certification and/or Licensure:
BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
Applicant shall possess a minimum of 6 years’ experience in aircraft external Loads analysis; 10 years’ experience is preferred
Excellent communication skills both written and verbal
Experience and demonstrated proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required. Python experience and/or proficiency is desirable

Knowledge, Skills and Abilities:
Knowledge of static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements. Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable
Knowledge of, and experience with, FAA FAR 23 and EASA CS 23 Loads regulatory requirements and means of compliance is required, and experience with FAA FAR 25 and EASA CS 25 Loads regulatory requirements and means of compliance is desirable
Organize, schedule and effectively coordinate work packages / phases, and lead less experienced team members in loads analysis tasks
Must be proficient in generating documentation to support certification efforts related to external loads
Knowledge of, and experience with, aeroelastic principles and concepts, including but not limited to static aeroelastic analysis including divergence and control reversal, is required
Knowledge of, and experience with, dynamic aeroelastic analysis is desirable. Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable
Strong knowledge of CFD principles and CFD-based modeling, along with wind tunnel test data usage for Loads analysis, is required. Applicant must be able to communicate aerodynamic, structures and systems discipline input needs to ensure accurate load set development and conveyance.
Good fundamental knowledge of mass properties principles as they relate to loads analysis
Knowledge and experience with cable-driven / mass-balanced flight control systems required including limited-authority servo systems, and knowledge of, and experience with, advanced flight control architectures including full-authority actuator systems, is desirable
Strong knowledge of flight test data analysis related to structural design loads substantiation, as well as a demonstrated ability or experience with development of computational methods relating to loads analysis

The Structures Company is an AA/EOE.
 
Job Number: 239
Job Location: NC
Rate: Up to $75/Hr. *DOE*
Per Diem: Yes
Duration: 9+ Month
Start Date: October
Input Date: 09/17/2018
Last Updated: 11/14/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Aircraft Mechanics

Description:
Role Description
  1.  Service, repair, troubleshoot and modify aircraft and aircraft engines.
  2. Repair, replace and rebuild aircraft structures, system and functional components.
  3. Assemble and install electrical, plumbing, mechanical, hydraulic, structural components and accessories using hand tools and power tools.
  4. Adjust, align and calibrate aircraft systems using hand tools, gauges and test equipment, machines and equipment such as shears, sheet metal brakes, welding equipment, pneumatic tools.
  5. Research and understand FAA technical data relevant to assigned tasks.
  6. Maintain the premises in a clean and organized manner.
  7. Remove and/or install aircraft components, test IAW MM, and troubleshoot aircraft systems.

Knowledge/Skills/Abilities:
 
  • Strong knowledge in FAA regulations, Aviation Rules (FOD’s, Safety, Quality, Hazardous Materials, Aircraft Marshalling), aerodynamics, aircraft electrical systems, materials science, aircraft maintenance, electrical testing, instrumentation, gas turbine and piston power plants.


  • Good leadership (individual contributor) presence:

    • Able to lead by example and live/work by company values. 
    • Ability to successfully contribute to a positive and productive work environment.
    • Able to instill a sense of urgency in team members. 
    • Able to be patient and objective in difficult situations with different types of people.



  • Good customer service tool box:

    • Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
    • Strong follow-through, quick thinking and resourceful.
    • Ability to remain calm, cool and collected in stressful situations.
    • Strong sense of urgency to address and solve important issues.

  • Good organizational, time management and prioritization skills:
    • Able to multi-task, maintain focus on several different projects at one time and hit deadlines. 
    • Able to be flexible with attention and priority.
    • Ability to work in a progressive, fast-paced environment (work well under pressure).

  • Good analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
  • Good communication skills (oral, written) with customers.  
    • Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.

  • Good interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization. 
  • Good project management skills, including the ability to take ownership for accomplishing assigned tasks.  Results-oriented planner who ensures that goals are met.  Able to set priorities and keep to projected schedules.
  • Computer Skills:  Comfortable and effective working in Microsoft Office, including Word, Excel, Outlook, and PowerPoint.

 
Education
 
  • Associate’s Degree (or Technical School equivalent) in Aircraft Maintenance or related field from an FAA accredited school   
  • A&P Certificate
  • Japanese Bilingual preferred

 
Experience
 
  • Three (3) plus years of aircraft mechanical experience preferred

 
Job Number: 1810089104
Job Location: Moses Lake, WA
Duration: 6 months
Input Date: 07/31/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mf2gAAA&URLSource=cjhunter

Aircraft Operations Analyst

Description:
PDS Tech is seeking a top performer for a key role within the Sales & Marketing Team. You are a marketing specialist and an experienced industry expert, expected to provide world-class solutions for our teams, our customers and prospects in support of marketing the Company's family of aircraft against competitor types.  You understand industry and customer needs in order to support all objectives of the Marketing team.

In this role, you are the subject matter expert (SME) for aircraft performance analysis and the aircraft performance analysis tool used by marketing, in order to help promote the operational advantages of the Company's family of aircraft.  You will also manage, maintain and administer the performance analysis tool used by marketing.

Responsibilities include:
 
  • Analyze complex problems in the areas of aircraft performance and aircraft operations and possess initiative and judgment to recognize implications of results in supporting marketing and sales strategies.
  • Propose solutions to unusual problems and make recommendations that are generally accepted as accurate and feasible.
  • Support both structured and ad hoc training requirements to develop the subject matter discipline within the Marketing team.
  • Act as focal and SME for Marketing’s aircraft performance analysis tool and provide input and guidance into the tool’s maintenance and development.
  • Liaison with Engineering and assist in managing relationships with 3rd party suppliers.

  • Degree in Mathematics, Sciences, Engineering, Transportation Planning and Management or similar preferred.
  • A minimum of three (3) years of experience in Aircraft Performance Engineering. 
  • A good working knowledge of the various worldwide certification requirements (FAR, TC, EASA) and in particular FAR 25 and FAR Part 121.
  • Airline Dispatch and/or Airline Flight Operations experience an asset.
  • You are familiar with the basic features of many regional aircraft type.
  • Good presentation and communication skills combined with exceptional analytical capability and attention to detail.
  • Strong computing skills that include programming experience and software development, along with expert level proficiency in Excel and Powerpoint.
  • Strong written and verbal English skills; other languages are considered an asset.
  • Pilot’s license is considered an asset.

 
Job Number: 1810092773
Job Location: Nagoya,
Duration: 12 months
Input Date: 10/02/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f54DAAQ&URLSource=cjhunter

Aircraft Painter 1

Description:
PDS TECH INC. is seeking Aircraft Painter 1 located in El Segundo,CA.

 

Position Summary / Responsibilities



Paints aircraft interior, exterior and piece parts. Prepares for painting by masking, stripping, washing aircraft sections and



components. Blends and mixes paints, inks, and coatings to proper spraying consistency. Performs detail and touch-ups.



Sets-up and coordinates processes for painting production parts.


 

 


Qualifications
 

Basic Qualifications:



- High School diploma or equivalent and 0 months of experience.



- Experience Painting and preparing surfaces or parts for paint.



- Must have the ability to pass Special Medical/respiratory exam.



- Must have the ability to be certified for half as well as full face respirator.



- Must be able to perform repetitive physical activity such as: bending, stooping, kneeling, lifting, and working overhead.



 



Preferred Qualifications:



- Previous F-35 experience preferred.



- At least six (6) months of aircraft painting experience preferred.


 
 
Job Number: 1810086114
Job Location: El Segundo, CA
Duration: 0 months
Input Date: 09/11/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Ramon Quintana
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mSzbAAE&URLSource=cjhunter

Aircraft Painter 3

Description:
PDS Tech, Inc. is seeking a candidate for the Aircraft Painter 3 position located in El Segundo,CA.

Position Summary:

Paints aircraft interior, exterior and piece parts. Prepares for painting by masking, stripping, washing aircraft sections and components.
Blends and mixes paints, inks, and coatings to proper spraying consistency.
Performs detail and touch-ups. Sets-up and coordinates processes for painting production parts.

 
Basic Qualifications:
  • High School diploma or equivalent and 6 months of experience.
  • Experience Painting and preparing aircraft surfaces or parts for paint. 
  • Must have the ability to pass Special Medical/respiratory exam. 
  • Must have the ability to be certified for half as well as full face respirator.
  • Must be able to perform repetitive physical activity such as: bending, stooping, kneeling, lifting, and working overhead.     


Preferred Qualifications:

  •  Previous F-35 experience preferred. 

 

 
Job Number: 1810082558
Job Location: El Segundo, CA
Duration: 0 months
Input Date: 09/11/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jonas Lindner
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e0GmAAI&URLSource=cjhunter

Aircraft Painter I

Description:
PDS is seeking an RS Aircraft Painter for an open position in Savannah, GA.

The Aircraft Painter I prepares the aircraft for paint related operations by performing tasks safely within schedule while meeting quality expectations. 

Principal Duties and Responsibilities 

Essential Functions: 1. Mask, sand, and prepare aircraft for paint application. 2. Apply glazing and sealing compounds in preparation for final painting. 3. Operate and maintain all types of preparation and priming equipment. Mix paints and primers. 4. Perform leading edge sealant work in final detail. 5. Comply with all safety, 5S, and housekeeping policies. Use personal protective equipment and ensure aircraft interior is protected (PTP). 

Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned. 2. Comply with Paint shop standard practices. 3. Perform other duties as required. 
 
 


 

Education and Experience Requirements: 
High school diploma/GED. One (1) year of painting experience. A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics).

Other Requirements: 1. Ability to read, write, speak, and understand the English language. 2. Ability to read and interpret blueprints and engineering documentation. 3. Able to pass Pulmonary Function Test to obtain respirator certification. 4. Ability to use tools, equipment, and materials in the aircraft painting process. Able to climb ladders and stairs, perform close tolerance work, work in small spaces lift up to 40 pounds and work any shift. 5. Must be computer literate.

Unique Skills:



Must be able to work any shift when required and work well with the team.



 


 

 
Job Number: 1810094173
Job Location: Savannah, GA
Duration: 6 months
Input Date: 10/17/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qw54QAA&URLSource=cjhunter

Aircraft Painter II

Description:
PDS Tech is seeking an  RS Acft Painter II for an open position in Savannah, GA.


The Aircraft Painter II works under minimum supervision to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures. 

Principal Duties and Responsibilities:

Essential Functions:
1. Safely perform aircraft preparation, painting, and detailing of aircraft under minimal supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. 2. Follow standard operating procedures when using tools and equipment such as dual action sanders, hydraulic lift platforms and paint sprayers. Properly care for and maintain shop equipment and tools. 3. Follow standard operating procedures when using sealants, paint strippers and corrosion-preventive chemicals and use protective equipment as required. 4. Comply with safety rules and procedures and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. 5. Use the material tracking system to create parts demand, track squawks and to sign-off work. 6. Assist with aircraft movement in hangars. 7. Offer continuous improvement ideas/participate in continuous improvement activities. 

Education and Experience Requirements: High school diploma/GED. Valid Drivers License required. Two (2) years experience in related paint processes. Aircraft industry experience preferred. A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics) is necessary.

Other Requirements: 1. Ability to read, write, speak, and understand the English language. 2. Able to use tools and equipment associated with the aircraft painting process. 3. Ability to read and interpret blueprints and engineering documentation. 4. Able to pass Pulmonary Function Test to obtain respirator certification. 5. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 6. Must be computer literate.

Unique Skills: Aircraft Painting Skills

POC:  Clyde (813) 426-9917 or ccallwood@pdstech.com 


 
Job Number: 1710072520
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/23/2017
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023B6tAAE&URLSource=cjhunter

Aircraft Prep Trainee

Description:
PDS Tech is seeking a Aircraft Prep Trainee for an open position in Savannah, GA.
In your role, you will:

The A/C Prep Trainee works along side higher level employees to assist with the preparation and painting of aircraft. 

Principal Duties and Responsibilities: 

Essential Functions: 1. Assists in the preparation of the exterior surfaces of aircraft for application of primer and topcoat. Use various masking materials to protect windows, external probes, antennas, and other required areas. Sand and wash the aircraft surface as directed. 2. Assist with and applies corrosion preventative materials to the aircraft. 3. Apply primer and sanding surfacer to aircraft. 4. Uses tools to sand primer and sanding surfacer in preparation for base coat. 5. Comply with all safety, 5S, and housekeeping policies. Use personal protective equipment as required. Use (PTP) to ensure aircraft interior is protected. 

Additional Functions: 1. Properly care for shop equipment and tools as assigned. 2. Comply with Paint shop standard practices. 3. Perform other duties as required. 
 

As our ideal candidate, you will meet the following requirements:

A high school diploma or GED. Paint experience in a technical environment or trade school preferred. See Other Requirements in Job Description.

Other Requirements:
1. Ability to read, write, speak, and understand the English language. 2. Ability to read and interpret blueprints and engineering documentation. 3. Able to pass Pulmonary Function Test to obtain respirator certification. 4. Ability to use tools, equipment, and materials in the aircraft painting process. 5. Able to climb ladders and stairs, perform close tolerance work, work in small spaces, and able to lift up to 40 pounds. 6. Experience may be offset by completion of Technical Certificate in paint and refinishing and/or successful completion in current year youth apprenticeship program, in area of expertise.


Unique Skills:



Must be able to work any shift when required and must be able to work well with a team.



 

 
Job Number: 1810094189
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 10/19/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qw8xQAA&URLSource=cjhunter

Aircraft Records Coordinator 3 MS

Description:
Aircraft Records Coordinator 3 (Job Number: 18022546)

Number of Openings: 1

Location(s): United States-Mississippi-Moss Point


Shift: 1st Shift

Target Start Date: Nov 26, 2018

Target End Date: Nov 22, 2019

Pay Rate: $23/hr

Work Schedule: 4/10

Duration of Assignment: Up to 1 year

Aircraft Records Coordinator 3

The duties of this position will include, but are not limited to: constructing, updating, and maintaining aircraft and engine logbooks and records, aircraft inventory records (AIR), and weight & balance reports, while ensuring compliance with CNAFINST 4790.2 series and contractual requirements.

Knowledge:

•Thorough knowledge of aircraft logbooks, maintenance records, technical publications and CNAFINST 4790.2 series.
•Knowledge and proficiency in maintenance and material control procedures, aircraft logbooks, Aeronautical Equipment Service Records, Aircraft Inventory Records, Weight and Balance data, and Technical Directive reporting.
•Must be proficient in Microsoft products with a high degree of computer operation/keypunch knowledge.
•Must be able to analyze maintenance and material data and provide statistical reports.

Must be organized and driven to meet all deadlines.


Basic Qualifications:

The chosen applicant will be required to meticulously coordinate the construction of all aircraft and engine logbook forms for delivery to the Navy customer and will have the following qualifications:

•US Navy / US Marine Corps maintenance administration course graduate – (required).
•US Navy / US Marine Corps O-Level CNAFINST 4790.2 series experience: 4 years (required)
•Experience as a US Navy / US Marine Corps Logs and Records Administrator or Supervisor: 4 years (required)

Preferred Qualifications:

•Completion of US Navy Logs and Records course completion (preferred)
•Aircraft Weight and Balance course completion (preferred)
•Familiarity with aircraft DD250 process (preferred)
•Aircraft logbook experience with military rotary aircraft (preferred)
 
Job Number: MB-1691
Job Location: Moss Point, MS
Rate: 23/hr max
Per Diem: no
Duration: 1 year
Input Date: 10/16/2018
Last Updated: 12/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aircraft Seat/Slide Technician

Description:
PDS Tech is seeking Aircraft Seat/Slide  Techs for open positions Atlanta, GA


  • Perform final assembly of interior systems and mechanical assemblies. 
  • Disassembles aircraft interior components.
  • Responsible for proper storage and separation of serviceable parts, i.e. bin or bag.
  • Responsible for proper storage and separation of unserviceable parts, i.e. reject or scrap.
  • Wash serviceable parts.
  • Seat Cleaning.
  • Correct usage of pressure washer.
  • Removal of aircraft seat cushions.
  • Removal of aircraft seat dress.
  • Completes daily paper work for job assignments, indicating material used and amount of time involved.

Basic Qualifications:
  • High School Diploma or GED
  • Mechanical experience required
  • A&P license a plus
  • Knowledge of basic hand tools, i.e.
  • Knowledge of applicable power tools.
  • Completion of seven (7) required safety courses: Respiratory Training, Injury Prevention Program, Emergency Action Plan, Blood borne Pathogens, Hazardous Communication, Lock Out Tag Out, Ergonomics.

 
Job Number: 1810084811
Job Location: Atlanta, GA
Duration: 3 months
Input Date: 04/25/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mNhPAAU&URLSource=cjhunter

Aircraft Stress Engineers

Description:
Nastran, Patran a plus
 
Job Location: GA/WI
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

Aircraft Structure Mechanic (25) - OK

Description:
Chipton-Ross is seeking 25 Aircraft Structure Mechanics for an opening in Tulsa, OK.

RESPONSIBILITIES:
Perform structural assembly and fastener installation of components and assemblies, sealing in confined spaces. Assure quality conformance to company/customer requirements and specifications. Responsible for assuring final quality acceptance of installations, structures, components and controls.


-Perform a variety of fastener installation and structural assemble operations. -Apply sealing compounds, mixes, resins, protective coatings and touch-up paint. -Operate automated riveting machines. - Clean tanks and other surfaces by removing oils grease, litter, and other contaminants. -Perform fitting and rework operations. - Make minor adjustments to equipment such as changing sets, punches, shims and dies. -Prepare and maintain necessary documentation and records. -Adhere to all applicable safety and operational procedures and directives. -Assist and instruct other assemblers. -Bring to the attention of supervision all malfunctions, defects and damages of equipment, material and product. -Keep work area clean and orderly. -May be required to perform other duties as required.

REQUIREMENTS:
-Must have a minimum of 5 years' experience in Aircraft Structural Assembly in an Aircraft Manufacturing environment. - Must be able to work accurately from engineering drawings, blueprints, specifications, quality procedures and other written and oral work instructions. -Must be able to use hand tools, power tools, precision measuring instruments, and basic shop equipment. -Must be able to lift, climb, grasp, hold, stand, bend, and stoop. Preferred candidates will also be able to perform basic administrative skills needed to prepare and maintain documentation, records and specifications and use computers to access electronic work instructions and enter data to document completion of work. Must be willing to work any shift.

EDUCATION:
Equivalent to four (4) years High School plus vocational or similar training, including shop math to interpret and work from engineering drawings, manufacturing specifications and procedures, work orders and verbal instructions.



 
Job Number: 169641
Job Location: Tulsa, OK
Rate: Up to $30.00 DOE
Duration: Until April 2019
Input Date: 08/22/2018
Last Updated: 12/13/2018
Firm Name: CHIPTON ROSS
Attention: Chris Conaway
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cconaway@chiptonross.com
Website: www.chiptonross.com

Aircraft Technician II

Description:
PDS Tech is seeking an RS Acft Tech II for an open position in Brunswick, GA.

Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures. 

Principal Duties and Responsibilities:

Essential Functions:
1. Communicate as required to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision.
2. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers.
3. Ensure that all work accomplished meets quality standards and specifications.
4. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
5. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.)
6. Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas.
7. Provide training to less experienced technicians.
8. Protect customer property (PTP). 

Additional Functions:
1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered.
2. Implement and apply Lean/continuous improvement processes to all areas of responsibility.
3. Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use.
4. Comply with safety rules and procedures. Use protective equipment as required and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk.
5. Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders.
6. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
7. Perform other duties as assigned. 
 

Other Requirements:
1. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.
 

Education and Experience Requirements:




High School Diploma or GED required. 

FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.

Valid Driver’s License required.


 
Job Number: 1810092419
Job Location: Brunswick, GA
Duration: 6 months
Input Date: 09/26/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f3JoAAI&URLSource=cjhunter

Airframe Design Engineer

Description:
PDS Tech Inc is seeking a Airframe Design Engineer in Wichita, KS

Candidates will assist with developing, planning, organizing and conducting complex design assignments on Textron Aviation aircraft. The candidate will perform duties as either an airframe design engineer or a systems design engineer. Airframe design engineers will take responsibility for planning, optimizing, and executing complex aircraft structural design assignments. This will include the support of new product and sustaining designs and require coordination with multiple technical stakeholders.Initiate designs or incorporate design improvements utilizing CATIA software with an emphasis on modeling and drafting, 3D model development in support of detail, assembly and installation layouts. Communicate and coordinate with technical disciplines, such as Manufacturing, Tooling, Structural Integrity, Aerosciences and Utility Systems .Peer drawing checking and the release of engineering documents, as well as day-to-day collaboration to resolve design conflicts and interferences. Support of Space Reviews (i.e. CATIA V6 Model Management/Interference Checks). Support prototype aircraft assembly, which includes coordination with Experimental Engineering to support design interpretation and occasionally investigate and respond to problems in manufacturability. Build prototypes of systems components for testing; set up and run laboratory simulations. Assist in the creation of test procedures and coordination of testing. Create presentations to convey test results, design issues, or trade study recommendations. Support the investigation and response to customer field service issues
• Required: 

o CATIA V5—Part Design & Sketcher, Assy Design, Wireframe & Surface, & Drafting workbenches 

o Experience with monolithic, sheet metal, and composite structure 

o Preferred: V6 and Enovia 

o Preferred: Aerospace Sheet Metal Workbench 

o Preferred: Experience with reduced dimension drawings
 
Job Number: 1810090585
Job Location: Wichita, KS
Duration: 12 months
Input Date: 10/26/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mkbcAAA&URLSource=cjhunter

Airline Marketing Analyst

Description:
PDS Tech is seeking a top performer for a key role within the Sales & Marketing Team. You will need demonstrated business acumen, strategic thinking capabilities and possess problem solving, creative, analytical, and research skills. You are able to create engaging presentation material and express ideas and present data in a concise manner. 
 
Typical responsibilities include:
 
  • Conducting standard route performance analysis, economic analysis, traffic analysis, fleet planning, financial analysis and competitor evaluations using established processes
  • Identifying market opportunities and prepare business cases demonstrating the value of the Company’s family of aircraft
  • Developing models that accurately reflect an airline’s business environment and allowing for multiple scenarios to be evaluated
  • Developing and executing the marketing strategies for assigned accounts to support the sale of the Company’s family of aircraft
  • Providing insightful analysis, creating and delivering presentations to potential airline customers, external industry stakeholders and internal senior management
  • Taking responsibility for selected accounts and managing relationships with airline contacts
  • Managing multiple deliverables, deadlines and priorities subject to weekly review with management
  • Traveling to visit customers, usually with a team representing the Company, or independently where relationships have been established

  • Minimum Education is University degree with preference given to a Masters level
  • 2 to 4 years related aviation experience required in any combination of the following areas:
    • airline industry, aircraft operations, aircraft performance engineering, fleet planning, marketing and/or financial analysis

  • English language required, other languages are assets
  • Willing to travel on company business
  • Presentable, excellent customer interaction skills
  • Demonstrated analytical and computer skills required
  • Proficient in Microsoft Office (Word, PowerPoint, Excel)

 
Job Number: 1810092771
Job Location: Nagoya,
Duration: 12 months
Input Date: 10/04/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f53ZAAQ&URLSource=cjhunter

Autoflight or Flight Deck test engineer

Description:
Experienced Autoflight or Flight Deck test engineer for large military and/or commercial aircraft. Ability to lead the development of test plan scope, procedures and schedule at the program level. Strong systems engineering experience managing/mapping verification requirements (i.e. DOORS) and certification regulation methods of compliance. Applies lessons learned to the improvement of test procedures. Guides others in the design of test hardware, software and systems to achieve test requirements. Works well as a member of the test team. Leads the analysis, processing and formatting of data to customer requirements. Approves test data prior to delivery to customer. Formulates expectations for test data based on historical data. Performs functions as required to ensure calibration system readiness and data validity. Trains others. Works under minimal direction.
 
Job Number: 130524
Job Location: Tukwila, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 09/21/2018
Last Updated: 12/07/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Shailendra Mishra
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: shailendra.mishra@acsicorp.com
Website: www.acsicorp.com

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 02/27/2017
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Systems Engineers – Contract – China

Description:
Avionic Systems Engineers – Contract – China

Our Client in China requires Avionic Systems Engineers with experience of modern civil aircraft avionics : Modern Displays, Integrated Modular Avionics, Flight Management System, On Board Maintenance System and other subsystems. You will be engaged in Avionic Systems Design, Verification, Subsystems Requirement Analysis and Systems Configuration Design. Senior Experience and / or Team Lead Experience. You must be available to live and work in China for these roles. Our Client requires continuity on their programs.

Good packages available.

Please quote ref: JO0000000068 when applying
 
Job Number: JO0000000068
Job Location: China
Duration: 3 - 5 years
Start Date: 20/1/2019
Input Date: 12/04/2018
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Avionics & Electrical Design Engineers

Description:
SolidWorks aircraft electrical and avionics upgrades

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 06/12/2018
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

Avionics Electrical Systems Engineer

Description:
Avionics Electrical Systems Engineer assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.

Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/04/2018
Last Updated: 12/07/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

Avionics Engineer

Description:


PDS Tech is currently recruiting for an Avionics Engineer in Greensboro, NC.
 


Duties and Responsibilities:


  • Define, plan, and develop complex systems level requirements to support the avionic systems.


  • Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems


  • Interface with suppliers to ensure technical requirements are met to support aircraft development need dates


  • Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution


  • Perform system evaluation and analysis to verify the system design compliance with functional requirements


  • Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule


  • Develop targeted system level enhancements to address customer feedback and product improvement initiatives


  • Conduct system lab testing and aircraft functional testing


  • Prepare presentations on avionics system design/development status


  • Support system analyses for avionic systems





 



 











Qualifications


 Education, Work Experience, Certification and/or Licensure: 


  • Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronics Engineering or Aerospace Engineering  


  • Minimum of 6 years to a maximum of 20 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test 


 
Knowledge, Skills and Abilities:  


  • Working knowledge of design requirements of 14CFRPart 23 


  • Proficiency in writing technical documentation and reports involving test data and analysis 


  • Familiarity with avionics/electrical test laboratories and lab equipment 


  • Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware 


  • Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required) 


  • Proficiency in requirements management tools such as DOORS 


  • Proficiency in PLM Tools such as TeamCenter and SAP 


  • Ability to handle complex work assignments 


  • Ability to work independently and within a multi-functional team environment 






 




 






 
Job Number: 1810094748
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 10/29/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qy0lQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
General Summary:
The Avionics System Engineer will be responsible for the design, development, and integration of the assigned avionics systems for the aircraft.
Duties and Responsibilities:
Define, plan, and develop complex systems level requirements to support the avionic systems for the aircraft
Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
Interface with suppliers to ensure technical requirements are met to support aircraft development need dates
Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution
Perform system evaluation and analysis to verify the system design compliance with functional requirements
Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule
Develop targeted system level enhancements to address customer feedback and product improvement initiatives
Conduct system lab testing and aircraft functional testing
Prepare presentations on avionics system design/development status
Support system analyses for avionic systems



The Structures Company is an AA/EOE.
 
Job Number: 234
Job Location: NC
Rate: $60/Hr.
Per Diem: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 11/14/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Avionics Engineer

Description:
JOB SUMMARY:
Principal responsibilities include design and integration of aircraft avionics and electrical systems for modifications.
JOB RESPONSIBILITIES:
• Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD, Mentor Graphics and/or IAI HarnesSys)
• Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft
• Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents
• Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc.
• Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.
• Assist with the development, design, testing and certification documentation for new or modified printed circuit board modules for aircraft
EDUCATION/ EXPERIENCE:
• At least 2 years of related experience
• Bachelor’s Degree (or equivalent industry experience) in: Electrical Engineering, Computer Engineering or Electrical/Electronic Engineering Technology, or related technical degree.
• Electronic drafting experience with CATIA-CADAM Drafting (CCD), Mentor Graphics and/or IAI HarnesSys desired.
• C/C++ and assembly programming experience or coursework desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus.
• Experience with avionics and electrical system design to the requirements of CFR 14 Parts 23 & 25 is desired.
• Experience with 3D modeling and drafting using CATIA V5 file based/Enovia and/or CATIA V6/Enovia is beneficial.
 
Job Number: 87958
Job Location: multiple
Rate: open
Per Diem: possible
Overtime: possible
Duration: Long Term
Start Date: ASAP
Input Date: 07/25/2018
Last Updated: 12/13/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Avionics Subsystem Lead Engineer

Description:
seeking an Avionics Subsystem Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the primary avionics, secondary avionics, pitot statics, navigation, synthetic vision, enhanced vision, communications, antennae, radar, data acquisition, safety systems, health monitoring & reporting and integrated modular avionics. The successful candidate will manage the various avionics systems design and system’s suppliers, as well as all design and certification activity required. The Avionics Subsystem Lead Engineer will work out of our Reno, NV, headquarters and report to the Director of Cockpit IPT.

Duties include, but are not limited to:
• Develop avionics systems design, architecture and product plan, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of avionics systems
• Define requirements for the avionics systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of avionics systems requirements
• Perform avionics systems tests and certification, and provide system and certification documentation
• Interface directly with avionics systems suppliers
• Manage the avionics scheduling, budget and resources
• Report subsystem status to ensure milestones are met in support of the overall program schedule

Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position
• Minimum of a Bachelor’s Degree in Aerospace, Electrical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in Avionics systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing avionics systems from concept through certification strongly desired
 
Job Number: 42-005
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 12/03/2018
Last Updated: 12/10/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: Matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Avionics Tech

Description:
PDS Tech is seeking an Avionics/Install Technician for an open position in Tampa, FL.
In your role, you will:

  • To identify malfunctions, remove, repair and install a limited variety of aircraft communication, navigation, avionics, and electrical components. Perform analysis of routine electrical and avionics malfunctions according to standard shop practices using some equipment such as voltmeters, ohmmeters and continuity lights. Perform minor repair such as replacing wires and connectors on standard electrical components, removing, repairing, and re-installing avioncis equipement. Under guidance of supervisor, assist with analysis of more complicated malfunctions and repair of standard avionincs and electrical components. Install electrical, avionics and electronic components as directed



 
2-3 years experience as an Avionics Tech.
DOT Test Required?Yes

 
Job Number: 1810094015
Job Location: Tampa, FL
Duration: 9 months
Input Date: 10/23/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Kelly McCoy
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qvdKQAQ&URLSource=cjhunter

Avionics Technician

Description:
The ideal candidates will:

  • Determine routing of wires and location and best methods of installing.
  • Install, tests, repair, troubleshoot and performs maintenance and repair of conventional electronic controls, devices and systems.
  • Perform mechanical operations necessary to the dismantling, disassembly, repair, assembly, and installation of electrical units.
  • May be required to operate electronic data entry, storage, processing.
  • Perform installation, maintenance, and repairs on aircraft.
  • Locate and diagnose failures, replaces defective components and performs basic troubleshooting using standard electronic equipment.  

8 years’ experience on H-60 Aircraft is required.
 
 
Job Number: 1810092572
Job Location: Huntsville, AL
Duration: 18 months
Input Date: 09/27/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Sherrita Davis
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f3m2AAA&URLSource=cjhunter

Avionics Technician 2

Description:
PDS TECH INC. is seeking Avionics Technician 2 located in Rancho Bernardo,CA.


Summary:

Performs a variety of duties in the electronic, mechanical, or electromechanical areas.
Constructs, troubleshoots, calibrates, adjusts, tests, and maintains equipment, components, devices, or systems.
Works from engineering drawings and written or verbal instructions.
Operates related equipment; conducts tests and reports data in prescribed format.
Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

 
Basic Qualifications:
*High School Diploma/GED and a min of 2 year of experience fabricating and testing aircraft electrical wire harnesses.
*Experience reading and working to wiring schematics, blueprints, parts lists, and other engineering documentation.
*Knowledge of Electro-Static Discharge (ESD) and Foreign Object Elimination (FOE) principles and experience working in an ESD and FOE sensitive environment.


Preferred Qualifications:
*Previous certifications for fabricating and testing electrical harnesses per IPC/WHMA-A-620.
*Previous certifications and experience soldering electrical and electronic assemblies per joint industry standard IPC J-STD-001.
*Previous experience with 5S practices and working in a lean manufacturing environment.
* AA Degree preferred.
 
 
Job Number: 1810085210
Job Location: San Diego, CA
Duration: 12 months
Input Date: 04/24/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mPTtAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Bleed Air Designer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-024
Job Location: Greensboro, NC
Rate: Up to $60/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/17/2018
Last Updated: 11/14/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Bleed Air Systems Designer

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.

Physical Requirements:
1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.

The Structures Company is an AA/EOE.
 
Job Number: 240
Job Location: NC
Rate: $55/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: October
Input Date: 10/04/2018
Last Updated: 12/12/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

C++ Real Time Software Engineers

Description:
Software Engineers
Positions can be located at multiple sites:
Oklahoma City, OK 73145 / 73150 / 73135
El Segundo, CA 90245

Secret, TOP Secret AND non-cleared positions, at various skill levels

Tasks may include:
  • Lead, Develop and Maintain Code and integrate software components into a fully functional software system.
  • Develop, document, and maintain architectures, requirements, algorithms, interfaces and designs for software systems.
  • Requirements analysis, design, development, test, documentation, licensing, troubleshooting, and user support; custom operating system development; tool design and maintenance; research and development projects; trade studies; risk assessments; and support to software testing.
  • Execution of systems and software testing to verify operational and functional requirements. Assists with test procedures and documenting test results to ensure software system requirements are met.
  • Support software project management and software supplier management functions.
  • Select, tailor and deploy processes and tools; establish metrics.
  • Design, develop, implement, test and document software for surveillance aircraft platforms that enable air superiority by detecting, identifying, and tracking airborne threats and providing operators intuitive battle management controls.
  • Serve as a subject matter expert for software domains, system-specific issues, processes and regulations.
  • Positions include Leads as well as team members in the avionics software organization working closely with other software engineers, systems engineers, other disciplines, customers, suppliers and field service representatives.

 Bachelor's degree in an engineering classification.
 
Experience with any of the following:
  • C, C++, C#, Java, ADA, DXL, Chef, Puppet, Ansible
  • Java Script, Python, shell, Perl Scripting languages
  • Rhapsody, Rational, TFS, ClearCase, ClearQuest, Team Concert, Jenkins, Coverity, Eclipse
  • Real Time, Embedded, ROTS, Doors, Agile
  • Unix, Linux Windows
     

Contact Elisabeth Laspe at 314-482-3991 or elaspe@pdstech.com to discuss these opportunities.
 
Job Number: 1810088612
Job Location: Lexington Park, MD
Duration: 12 months
Input Date: 09/11/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mcb7AAA&URLSource=cjhunter

C++ Real Time Software Engineers

Description:
Software Engineers
Positions can be located at multiple sites:
Oklahoma City, OK 73145 / 73150 / 73135
El Segundo, CA 90245

Secret, TOP Secret AND non-cleared positions, at various skill levels

Tasks may include:
  • Lead, Develop and Maintain Code and integrate software components into a fully functional software system.
  • Develop, document, and maintain architectures, requirements, algorithms, interfaces and designs for software systems.
  • Requirements analysis, design, development, test, documentation, licensing, troubleshooting, and user support; custom operating system development; tool design and maintenance; research and development projects; trade studies; risk assessments; and support to software testing.
  • Execution of systems and software testing to verify operational and functional requirements. Assists with test procedures and documenting test results to ensure software system requirements are met.
  • Support software project management and software supplier management functions.
  • Select, tailor and deploy processes and tools; establish metrics.
  • Design, develop, implement, test and document software for surveillance aircraft platforms that enable air superiority by detecting, identifying, and tracking airborne threats and providing operators intuitive battle management controls.
  • Serve as a subject matter expert for software domains, system-specific issues, processes and regulations.
  • Positions include Leads as well as team members in the avionics software organization working closely with other software engineers, systems engineers, other disciplines, customers, suppliers and field service representatives.

 Bachelor's degree in an engineering classification.
 
Experience with any of the following:
  • C, C++, C#, Java, ADA, DXL, Chef, Puppet, Ansible
  • Java Script, Python, shell, Perl Scripting languages
  • Rhapsody, Rational, TFS, ClearCase, ClearQuest, Team Concert, Jenkins, Coverity, Eclipse
  • Real Time, Embedded, ROTS, Doors, Agile
  • Unix, Linux Windows
     

Contact Elisabeth Laspe at 314-482-3991 or elaspe@pdstech.com to discuss these opportunities.
 
Job Number: 1810088609
Job Location: Palmdale, CA
Duration: 12 months
Input Date: 07/18/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mcanAAA&URLSource=cjhunter

CNC Machinist

Description:
CNC Machinist applies advanced skills in administration and use of procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. 2. Independently perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. 3. Set up and operate necessary test equipment in accordance with required documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. 4. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required maintenance data to ensure conformity requirements are met. 5. Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. 6. Demonstrate expertise and efficiency in repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. 7. Demonstrate expertise in use, maintenance, and calibration requirements of precision measuring and inspection tools such as, but not limited to, micrometers, calipers, bore gauges, multimeters, watt meters, spectrum analyzers, and borescopes. 8. Demonstrate expertise in the flow of materials and work order processes within the repair station. 9. Maintain and utilize all required paperwork in accordance with FAA Repair Station requirements. 10. Maintain a clean and orderly work area. 11. Comply with all company and legislative environmental health and safety regulations. Must be proficient in the setup and operation of 3-5 axis CNC Mills. Must be able to setup and operate conventional mills and lathes and use related precision measuring tools to inspect machined detail components to blueprints / 3D models.


CNC Machinist Lay-out, remove, fabricate and/or install major and minor repairs to flight controls and other secondary structure components using honeycomb core sandwich construction techniques, composite repair techniques, test bench procedures, hydraulic press procedures, and servicing carts. 2. Fabricate and repair sheet metal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. 3. Remove & install APUs and perform all required APU maintenance for all aircraft models 4. Perform repairs to electronic assemblies and subassemblies by removing and replacing circuit components, either through hole or surface mount, using acceptable soldering and circuit repair techniques. 5. Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. 6. Assist with training and instructing of other Acft Compo Repair I and II Techs. 7. Perform other duties as assigned.
HS diploma or GED. A&P license, FCC license, or NCATT cert preferred. Able to read/interpret blueprints, engrg docs and use/read precision measuring tools. Proficient in the operation of all tools & equip in the dept. Basic understanding of shop math. 4 yrs. experience in one of the following or other related expr: Sheetmetal, hydraulic overhaul, avionics/elect compo repair. Accredited schooling in electronics and elect sys may offset some experience reqmts. APU removal, install, service.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/04/2018
Last Updated: 12/07/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

Cabinet Finisher II

Description:
PDS is seeking a Cabinet Finisher II  for an open position in Savannah, GA.

Under general supervision, prepares and applies finishes to aircraft furniture using aircraft specifications, designs and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship. 

Principal Duties and Responsibilities: 

Essential Functions: 1. Works under general supervision to prepare furniture for finish and disassembly using blueprints, aircraft specifications and design/engineering drawings. 2. Performs high quality repairs to various finished surfaces in the shop and aboard aircraft. Cleans and polishes blemishes as needed to prepare the aircraft for delivery. Applies finish to furniture using spray equipment and other manual/mechanical methods. 3. Uses various types of sandpapers, polishes, adhesives, masking mediums, solvents, finish materials, hand tools and various power tools to disassemble and finish furniture. 4. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior (PTP). 5. Uses the material tracking system to create parts demand, track squawks and to sign-off work. 

Additional Functions: 1. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques. 2. Performs other duties as required. 

Please contact our Altanta or Savannah offices:  Atlanta@pdstech.com Office: 877-272-0088 and SavannahBranch@pdstech.com Office: 912-480-4706
 

Education and Experience Requirements:

High school diploma/GED. Two (2) years experience in wood finishing. Experience in aerospace industry preferred. Basic knowledge of cabinet finishing processes and products.

 



Unique Skills:



Knowledge of Solumina preferred but not required.

Other Requirements: 1. Possess a working knowledge of inspection and process specifications. 2. The ability to read, write, speak, and understand the English language. 3. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 4. Must be computer literate.


 
Job Number: 1810082578
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/25/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e0N6AAI&URLSource=cjhunter

Cabinetmaker I

Description:
PDS is seeking a Cabinetmaker I  for an open position in Savannah, GA.
In your role, you will:


Under direct supervision, learns and performs the basic skills and functions related to fabrication of aircraft cabinets and other wood-surfaced subassemblies using design and engineering drawings. 

Principal Duties and Responsibilities:

Essential Functions: 1. Learns entry-level technical skills and knowledge, regulatory requirements and tooling used in aircraft cabinetmaking. Continues to develop technical competency and problem solving abilities to allow progression to the technician level. 2. Using standard safety and operating procedures, design/engineering drawings, tools and other materials (laminates, veneers, cap strips), develops proficiency in the preparation and making of furniture. 3. Utilizes the material tracking system to create parts demand, track squawks and to sign-off completed work. 4. Complies with all safety, 5S, and housekeeping policies, uses personal protective equipment; ensures aircraft interior is protected. Assists in the development and implementation of related initiatives. 


 

Education and Experience Requirements:
High school diploma/GED. Wood working, wood finishing or auto body & painting experience in a technical environment or completion of Technical Certificate in cabinet making preferred and/or completion in current year youth apprenticeship program, in area of expertise.

Other Requirements: 1. The ability to read, write, speak, and understand the English language. 2. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 3. Must be computer literate.



Unique Skills:



Must be able to work any shift and overtime as needed.



 

 
Job Number: 1810087739
Job Location: Savannah, GA
Duration: 6 months
Input Date: 06/22/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mZ1kAAE&URLSource=cjhunter

Certification Manager

Description:

PDS Tech is recruiting for a Certification Manager located in Nagoya, Japan.
Role Description



  • Certification Manager will work as a Certificate Manager of Safety and Development Assurance Group.
  • Basic work scope is to develop and finalize aircraft T/C design, compliant to all applicable requirements:
  • Creating Type Certification Plan for Safety and Development Assurance.
  • Developing Certification Scenarios.
  • Getting agreement from Airworthiness Authorities.
  • Coordinating and approving the Certification Documents agreed within the Certification Plan.
  • Coordinating and approving Development Assurance Documents and Data agreed with aircraft development plan.
  • Evaluating the current aircraft design and development activities, with respect to compliance to the ‘Safety and Development Assurance’-related airworthiness regulations of JCAB, FAA and EASA,
  • Creating compliance scenario and MOC (Method of Compliance) for respective regulation,
  • Making discussion with Authorities, about T/C design, MOC and any other negotiations to be required,
  • Leading showing-compliance activities in Safety and Develop Assurance,
  • Reporting Issues around ‘Safety and Development Assurance’.
  • All tasks required to perform above activities are considered within work scope; overseeing/reviewing related documents, technical analysis, interface discussion within team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
  • Provide expertise to assist in resolving the technical challenges raised from the Safety analysis activities and Development Assurance activities.

Education:
Bachelor's Degree
 
Job Number: 1810085137
Job Location: Nagoya,
Duration: 36 months
Input Date: 05/02/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mPFeAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chief Aviation Inspectors

Description:
STS Technical Services is Hiring Chief Aviation Inspectors in Inwood, New York.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Job Purpose:
To ensure the repair stations operations are conducted in accordance with the pertinent FAA Regulations, client’s Quality Manual/Procedures, Customer Air Carrier Requirements and is designated with final airworthiness determination.

Job Duties:
The Chief Inspector will have the final airworthiness authority for the release, as airworthy, of the units the repair station is rated to repair and maintain
Responsible for ensuring all articles delivered to and maintained by the repair station are properly recorded and staged from receipt to delivery in their airworthy/serviceable condition
Managing and delegating to the repair stations inspection staff ensuring the quality and production needs are maintained
Perform, and have oversight of inspection personnel/activity, including Preliminary, Hidden Damage, In-Progress and Final inspections/RTS of aircraft articles processed by the Repair Station and assuring proper recording of results
Ensure compliance with pertinent FAA regulations, manufacturer’s technical data/approved supplements, RSM/QCM and customer requirements
Report all quality related issues to the QA Manager as soon as the Facility Manager is advised and ensure corrective actions are implemented
Confirm that all equipment being maintained by the repair station is on the Capabilities List, the proper data is available and in use, the staff is properly trained and all records of work/release are complete/accurate
Perform duties delegated by Quality Assurance Manager
Directly responsible for the compliance with the FAA Approved training program manual; including indoctrination, initial, recurrent, ongoing, semi-annual, and specialized training
Ensure any applicable Airworthiness Directive are posted and are being used and verify compliance with all other supplements, approvals, requirements
Submit reports of defect or un-airworthy condition to the “Service Difficulty Reports”
Assume all duties and responsibilities detailed in the RSQCM to include; calibration program, shelf life program, internal auditing, BER/scrap, work turn over, suspected unapproved parts, salvage parts program and incoming goods
Performing semi-annual internal audit of the repair station and any approved contractors
Coordinate with station manager inspection requirements
Ensure and assist in all areas of the Safety Program and Zero Harm Program to ensure that they are fully enforced and by all client employees
Provide feedback/suggestion to improve customer satisfaction
Communicate with customers and regulatory agencies during audits or visits
Ensure system security of our FAA approved electronic recordkeeping system regarding their area/s of responsibility
Maintain safe and clean work environment
Overseeing the quality of products in accordance with monthly budgeted production goals
Maintaining quality standard in accordance with the regulations, customer requirements and internal procedure
Establishing a quality and compliance system which will result in no major audit finding;
Equipment rejection rates shall be at 98% or higher
Maintaining positive MTTR
Contributing to positive MOP by controlling wastes
Enforcing the client Zero Harm Culture and goals

Qualifications:
2+ years’ experience as a lead inspector or manager in related aviation field
5 years’ aviation related industry experience
Confident personality with the ability to interface/communicate with the authorities and customers
Experience in performing Audits
Strong knowledge of FAA regulations and Part 145 requirements
Competent in reading and interpreting manuals, drawings, policies
Good communication and punctuation skills
Computer literacy and familiar with Microsoft office
Ability to learn new software programs and systems
Appropriately certificated under Part 65 (A&P or FAA Repairman)
Ability to work in a high activity/fast paced environment while managing associated stress
Possesses excellent organizational skills and ability to work independently
Organize responsibilities of the inspection staff and delegate duties to properly qualified inspection personnel
Effectively execute training in accordance with the Approved Training Program and internal requirements
Ability to make quality decisions and effectively solve problems
Strong verbal and written communication skills, including the ability to facilitate meetings and effectively lead groups
Ability to build and maintain effective working relationships with all levels of management and staff
Ability to lift, pull, and push in excess of 65 lbs
Must be able to read, write and understand the English language
Part 65 A&P or Repairman Certificate

Benefits:
STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 44529
Job Location: Inwood, NY
Duration: Contract
Input Date: 11/08/2018
Last Updated: 11/15/2018
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Communications Assistant

Description:
Role Description


We are seeking an enthusiastic, Communications Assistant to support communications and public relations initiatives focused on building and maintaining a positive company image. The Communications Assistant will be responsible for providing assistance to the public relations and project management teams, aiding with various PR and communications related tasks, and assisting with facility events and VIP/guest visits. The ability to communicate effectively in written and oral English and Japanese is a must. Top candidates will have superior planning and problem solving skills, as well as a desire to learn. The Communication Assistant will be working on a new and exciting aircraft project in Moses Lake, WA.


Responsibilities

Provide administrative support to the Public Relations Coordinator, PR team, and PMD teams, ensuring members have accurate and timely information regarding the program at MFC
Assist the Public Relations Coordinator with various PR and communications related tasks such as logo/photo use requests, press releases requests, event notification creation, local event and opportunity research, photo/video requests, and company intranet updates.
Assist with event and VIP/guest visit planning and execution.
Assist with translating PR and communications related materials such as newsletters and surveys.
Read, review, and stay up to date on media coverage regarding the company and the company’s PR strategies.
Provide help with ordering, stocking, and inventorying PR related goods .


Requirements
Exceptional communication skills, written, oral, and listening.
A positive attitude and ability to work well with and respect people from diverse backgrounds and multiple cultures.
Excellent planning and critical thinking skills as well as a desire to learn.
Ability to remain organized and composed in a fast-paced environment.
Bachelor’s degree required (Journalism, PR, or Communications studies preferred).
Fluency in written and spoken English.
Proficiency in written and spoken Japanese (Preferred).
Proficiency in MS Office (Microsoft Word, PowerPoint, and Excel).
 
Job Location: Moses Lake, WA
Input Date: 08/15/2018
Last Updated: 12/04/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: smclignsey@velocity-cs.com
Website: www.velocity-cs.com

Composite Technician (5) - CO

Description:
Chipton-Ross is seeking a Composite Technician (5) for an opening in Littleton/Waterton, CO.

RESPONSIBILITIES:
We are looking for talented Composite Technicians that have a strong mechanical aptitude and are eager to learn more about the industry. The technician's will be tasked to layup complex parts, final bag them cure, and process them through a curing vessel. Our technicians are also charged with bonding different types of fittings, inserts, spools, and cups using a multitude of adhesives. Employees will also be asked to complete minor hand machining operations using all types of manufacturing hand tools. Technicians are tasked to preform assembly work using close tolerance fasteners. Additional technician responsibilities also include attention to detail, use of personal protection equipment, ability to work in small teams and to work to established schedules. Employee's should be able to work overtime as required and weekends if needed.

REQUIRED EXPERIENCE:
Must be able to - Receive detailed written instructions from a supervisor, lead technician, or manufacturing engineer - Perform adhesive bonding operations to fabricate parts and/or for repair applications - Selects tooling and materials compatible with the processing techniques identified in the work instructions - Performs pre-preg composite lay-up - Verify work and ensure a defect free part prior to presenting to quality control
1-3 years experience

PREFERRED EXPERIENCE:
Experience in composite hardware layup/assembly. Past experience working in an aerospace manufacturing environment.
- Installation and torqueing of fasteners - Drilling and installing rivets - Measurement and shimming interfaces to close tolerances - Apply aerospace paint, primer and other coatings using spray, brush, swab applications - Surface prep, using grit blast, hand abrade and power abrasion techniques - Vacuum bag processing - Oven/autoclave curing operation - Tooling fabrication from various materials such as aluminum, composites, and wood - Working with small shop power tools (saws, routers, sanders, and grinders) - Machine shop equipment operation (mill, lathe, table saw, band saw, etc) - Assembly of composite structures including setup, bonding, and fastener applications. - Operation of measuring devises such as calipers, height gages, micrometers, and torque wrenches.
Aircraft & Powerplant license or similar professional certifications

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
1st Shift
Full-Time


 
Job Number: 174525
Job Location: Littleton/Waterton, CO
Rate: Up to $27.33 DOE
Duration: 4 Months
Input Date: 10/15/2018
Last Updated: 12/13/2018
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

Configuration Manager

Description:
PDS Tech, Inc. is seeking Configuration Managers in Jupiter, Florida.
 
Ideal candidates will support, perform, and manage varied duties relating to the development, control, and maintenance of new and existing complex systems configurations.


Responsibilities/Job Duties
  • Investigate and analyze project requirements and operating problems and develop recommended solutions to meet company governmental safety and performance standards including Minimum Equipment List (MEL)
  • Evaluate, select, apply, and/or adapt engineering modifications; design or recommend new or modified parts and components;
  • Analyze reparability of parts and components
  • Evaluate operating data on parts, components, and systems to establish causes and to determine remedies for wear, malfunctions, or premature removals
  • Analyze and evaluate aircraft and associated equipment proposals; prepare technical data, procedures, reports, drawings, manuals, and other required publications.

Education & Experience:
  • Appropriate degree from an accredited college or equivalent experience/combined education, with professional experience and specialized training commensurate with assignment.
  • A&P license preferred.
  • Must possess previous aviation and or helicopter flight line experience
  • Previous experience with lean manufacturing principles and processes highly preferred

Skills Required:

  • Requires strong leadership, organizational and interpersonal skills.
  • Candidate should be customer focused and a team player
  • Candidate should be self-motivated and goal oriented
  • Must possess excellent verbal & written communication skills for use at all levels of the organization such as coworkers, management and internal/external customers
  • Must be proficient in Microsoft Products specifically Excel and Project
  • The ability to create aircraft weight & balance sheets preferred

 Other Requirements:

  • Must be a US Person
  • Be able to travel to support offsite testing

 
Job Number: 1810090989
Job Location: Jupiter, FL
Duration: 18 months
Input Date: 09/03/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002ey6OAAQ&URLSource=cjhunter

Control System Engineer

Description:

Legacy Engineering, a division of PDS Tech, is seeking a Control System Engineer - Fire Protection System for the Regional Jet Program.



The primary work location will be in Nagoya, Japan. However, Engineers may be requested to relocate to Seattle or Moses Lake (Washington State, USA) where aircraft flight testing is performed.



The Control System Engineer will work as an Electrical Design Specialist for ATA 26-10 (Fire & Smoke Detection) and ATA 26-20 (Fire extinguishing). This includes all FPS system design aspects and interfaces within the FPS team and all other engineering teams; as well as interfacing with the FPS component suppliers in order to achieve the correctness and completeness necessary for FPS certification in the regional jet program.  



  • Basic work scope is to provide technical assistance to the development and certification of the regional jet program, focusing primarily on FPS performance assessment and optimization.
  • This activity includes:
    1. Prepare and review wiring diagram, electrical interface documents, Perform tests and troubleshooting in the RIG / Aircraft
    2. Support electrical qualification discussions for FPS components.
    3. Have the necessary technical background and competence in the system design as defined in this SOW scope.
    4. As required, conduct interface meetings with the FPS component suppliers.
    5. Prepare FPS design requirement documents, test specifications of type certification tests, test plans and test procedures,
    6. Coordinate with internal members, suppliers and authorities towards executing type certification tests.
    7. Prepare analysis documents, test compliance plans of analysis, and execute tests.
    8. Review supplier TSO and create TSO report
    9. Interface with the flight test team in Nagoya and the Seattle Engineering Office including Moses Lake to follow the FPS system tests conducted. Responsibilities include participating with the FPS team to prepare and/or review responses to flight test problem reports, review of test data and ground and flight test plans and test reports.
    10. Responsible for real-time telemetry monitoring during ground and flight tests, data analysis and documentation.
    11. Perform or assist with inspections and on-aircraft troubleshooting.
    12. Assist with identifying problems, adjusting and repairing systems during the troubleshooting process according to specifications, technical drawings, manuals and established procedures.
    13. Lead resolution of design challenges and any issues relate to aircraft certification.
    14. Act as an interface for the identified FPS ATA with the involved design specialists, FPS system supplier and subcontractors, in particular with the Interior Group.
    15. Be fully involved in supporting the Design Change process and activity.
    16. Perform other related tasks as assigned by the Team Leader.

  • Be prepared to work as a team member in a multi-cultural and international working environment at the Headquarter based in Japan. 
  • The engineer must be able to utilize interpersonal and communication techniques, working in a team environment as well as identifying potential issues with the ability to plan and implement short and long term goals in aircraft development.

  • Work Experience and Skillset:
    1. Each Engineer is mandated to meet the schedule by resolving problems and mitigating risk. Coordinate Interaction with other stakeholders (etc. PMO, SCM, and other engineering teams)
    2. All tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, discussion with relevant parties.
    3. Over 5 years experienced for designated design area.


 
Job Number: 1810094281
Job Location: Nagoya,
Duration: 18 months
Input Date: 10/16/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qwKRQAY&URLSource=cjhunter

Customer Order Specialist

Description:
PDS Tech is seeking a Customer Order Specialist in Peachtree City, GA.  
  • This position will respond to customer inquiries regarding spare parts for company aircraft and availability of parts. 
  • Previous business to business customer service experience in a fast paced environment is desired. 
  • Bi-lingual in English and Spanish or Portuguese is desired. 
  • Strong communications and computer skills are required.


 
Job Number: 1810088886
Job Location: Peachtree City, GA
Duration: 6 months
Input Date: 07/23/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Sheila Hernandez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mdqqAAA&URLSource=cjhunter

Customer Training Specialist 3 - (2) - AZ

Description:
Chipton-Ross is seeking 2 Customer Training Specialist 3 located in Mesa, AZ

RESPONSIBILITIES:
Courseware and training development, training instructor. Qualifications and recent experience required as an AH-64 D or E Romeo (general maintenance specialist). Must have in-depth and proficiency in MS PowerPoint and MS Word. Develops courseware and executes training requirements for the Apache in the classroom, on simulators, and through practical application of task performance on actual Apache training hardware and associated training devices. Training to occur for both maintainers and pilots. Prepare training courses to include development and modification of course materials and technical/training manuals and materials that reflect the customer's actual aircraft configuration. Proficient in the preparation of lesson plans, curriculum outlines and POIs. Proficient in conducting training on technical materials including all major Apache components. Uses current teaching techniques, advanced presentation skills and instructional methods; to include computer based training (CBT) and Instructor Led Training (ILT). Applicant must have strong communicative and presentations skills, and through observation and written evaluations, determine that a student has an understanding of materials covered during conduct of training and is proficient in the performance of relative tasks with or without additional instructional intervention. Assists with proposal development. Assists with analysis of customer technical training needs. Uses specialized software technology to research, configure, maintain, update and develop new and existing media and materials. Must have the ability to read schematics and technical drawings.

REQUIRED EXPERIENCE:
Design/Create Training Material - Required - Intermediate
MS Office - Required - Intermediate

Must have Apache Romeo credentials and qualification.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time/First Shift
7 AM - 4 PM

 
Job Number: 173875
Job Location: Mesa, AZ
Rate: $DOE
Duration: 4-6 MONTHS
Input Date: 09/12/2018
Last Updated: 12/13/2018
Firm Name: CHIPTON ROSS
Attention: Chelsie Goodreau
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cgoodreau@chiptonross.com
Website: www.chiptonross.com

Data Analytics Lead- MD

Description:
Chipton-Ross is seeking a Data Analytics Lead located in Lexington Park, MD.

RESPONSIBILITIES:
This is a contract to hire project.
The selected candidate will act as the Technical Lead handling project execution tasks and developing/conducting analytics in support of NAVAIRs Enterprise Services and Infrastructure commodity line.

The selected candidate will apply both project and technical management expertise to designing, implementing, testing, and operating enterprise class applications. The candidate will leverage knowledge of project management, enterprise data management, systems/software engineering, and systems operations and sustainment to bridge the gap between technologists and end users, and to ensure system/software solutions meet stakeholder needs.

Applicant will communicate with ES&I customers to understand requirements and produce outputs aligned with strategic business objectives to evolve predictive analytics capability for military programs. Will analyze and interpret data leading to development and implementation of predictive models / forecasting and decision optimization. Enable proactive identification of impending fleet issues, propose solutions, validate results and monitor success.

Apply experience with multivariate statistical analysis (linear & logistic regression, categorical analysis, cluster analysis, statistical sampling, decision trees, multidimensional scaling, etc.) as technical team lead. Conduct continuous research to identify new analytical products/methods for use within ES&I.
Overseeing the day-to-day execution of projects, facilitating resolution of issues, and reporting status at regular intervals to stakeholders

Developing and maintaining effective methods of communication between project stakeholders

Overseeing the technical aspects of the project throughout the systems development life cycle

Briefing key leadership and coordinating with various stakeholders to gather data and information to inform project tasks

Utilizing strong organizational and good communication skills

Working with stakeholders to define user and data requirements

REQUIRED EXPERIENCE/EDUCATION:
Accredited A Bachelor's Degree in Computer Science, Engineering, Math or Statistics and ten (10) to fifteen (15) years of experience are required.
Experience with designing, building, installing, and testing enterprise class information technology solutions

Experience leading diverse sets of technical teams to develop a cohesive product solution

Experience working with a diverse set of stakeholders including hardware and software Vendors, Engineers, Logisticians, Data Analysts, and Data Center hosting facilities

Strong problem-solving capabilities; ability to devise solutions for complex business problems

Experience using R, Python, SAS or other advanced analytics software

Experience with Red Hat Enterprise Linux, Enterprise Class Server HW, Java development, Hadoop Cluster planning and administration, HiveQL, Pig Scripts, Spark, and other big data related open source software solutions

Experience with multivariate statistical analysis (e.g. linear & logistic regression, categorical analysis, cluster analysis, statistical sampling, decision trees, multidimensional scaling, etc.), machine learning and big data solutions
Strong project management skills

Ability to coordinate team activities with aggressive deadlines

Experience working with interdisciplinary teams and customers to devise and implement solutions

Familiarity with aircraft support/engineering concepts

Excellent organizational, communication and interpersonal skills

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.


WORK HOURS:
Full-Time/First Shift
 
Job Number: 172342
Job Location: Lexington Park MD,
Rate: $DOE
Duration: 3 MONTHS
Input Date: 07/05/2018
Last Updated: 12/13/2018
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

Datalink CEC Project Analyst - MD - C

Description:
Chipton-Ross is seeking a Datalink CEC Project Analyst located in Lexington Park, MD

RESPONSIBILITIES:
We are looking for a professional to provide technical program support to the Networking and Data Links (NDL) team for the Cooperative Engagement Capability (CEC) in the E-2D aircraft.
The selected applicant will:
Interface with various organizations & IPTs internal and external to PMA-231 concerning various technical topics including: interoperability, system upgrades, and technical issues.
Effectively communicate technical related requirements formally and informally to other organizations, peers, and leadership.
Provide expertise in SOW Development, Evaluating Proposals, CDRL tracking/review, and support of System Engineering Technical Review (SETR) events.
Provide Risk & Opportunities Management support, including maintaining configuration control or each risk/issue and/or opportunity by working with the team members to obtain comments.
Provide schedule support including schedule planning, development and tracking.

REQUIRED EXPERIENCE:
Applicant must have experience with networking configurations on aircraft; must be familiar with SOWs and CDRLs in a DOD environment; must be familiar with Cybersecurity/IA concerns in a DOD environment; must have experience in DOD. Strong MS Office skills required are required.

If you don't have a PMA-231 then PMA-234 is ok.

EDUCATION:
Accredited A, BS or BA Degree is required. ALLOWABLE SUBSTITUTION: An AS or AA Degree and an additional four (4) years of experience; OR an additional eight (8) years of experience may be substituted for a BS or BA Degree.
Minimum Experience Requirement: At least four (4) years relevant experience.

WORK HOURS:
Full-Time

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 169039
Job Location: Lexington Park, MD
Rate: $DOE
Duration: 12 MONTHS (CTH)
Input Date: 03/25/2018
Last Updated: 12/13/2018
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
The Design Analyst is responsible for the engineering, designing, and drafting of tools, gages, lifting devices, work platforms, taildocks, and fall restraint systems to support maintenance on our ground support equipment, aircraft fleets, components, and engine types throughout the operation.
 
Job Number: 10-30-1
Job Location: Atlanta, GA
Rate: 39.00
Per Diem: split
Overtime: yes
Duration: 6 mos+
Start Date: ASAP
Input Date: 10/30/2018
Firm Name: TECH RESOURCES LLC
Address: 537 WARREN AVE
City, State: ST LOUIS, MO 63130
Phone: 314/862-2090

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Composite Aircraft Propulsion Structures

Description:
Design Engineer - Composite Aircraft Propulsion Structures
Location: Chula Vista, CA


MIN. EDUCATION: ABET Approved Bachelor Engineering: Aerospace or Mechanical


MIN. EXPERIENCE:

•8 Yrs Aerospace-Structural Designing (6 yrs with w MEng.)
•6,000 Hrs Using CATIA V5
•3 Years Designing Composite Parts with CPD or 3 Years with Fibersim


DURATION: Estimate 1-2 years











Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55265
Job Location: Chula Vista, CA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 10/31/2018
Last Updated: 11/12/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II with PTC CREO

Description:
WHO ARE WE
LMI is a world-class leader in designing, building and manufacturing aerospace structures, systems and components for commercial, business and regional, and military aerospace customers. We employ engineering, manufacturing and testing experts throughout the United States and the rest of the world. Our integrated team approach and full life cycle of capabilities enable our employees to take advantage of a wide range of opportunities for career growth within our organization.

POSITION SUMMARY

We are currently seeking a Design Engineer II with CREO experience. This position will work with the engineering team and will ensure the successful integration of each design element with the product as a whole. This individual will work both independently as well as part of the larger engineering team. Tasks will include the development of aircraft structural layouts and the design of individual components, assemblies, and installations. Engineering materials will include metals, nonmetals, and composite structural materials. Tasking may also include design and integration of aircraft mechanical systems, hydraulic systems, electrical systems, environmental control systems and a variety of other equipment and systems as needed.

ESSENTIAL JOB RESPONSIBILITIES

The Design Engineer II will work with minimal intervention and must rely on experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas:

Applies standard engineering practices and techniques, including innovative methodology, to provide effective solutions to problems involving a wide number of variables.
Able to ensure the selection and application of materials and processes are appropriate to each design element with the ability to generate and/or revise specifications when necessary.
Compose compliance matrix to meet customer specification requirements.
In-depth knowledge of standard concepts, practices, and procedures within a specified engineering field.
Proficiency utilizing CATIA V5 engineering design software.
Works on problems of complex scope where analysis of situation or data requires a review of identifiable factors to determine appropriate action.
Ability to guide, mentor and advise other design engineering staff.
Creativity and latitude is expected.
Participate in a variety of process improvement projects.
Able to support design reviews with timely and relevant information and understanding.
Performs other duties as required.

EDUCATION AND EXPERIENCES

Requires a BSME, BSCE, BSAE, or a Bachelor’s degree in a related engineering field and a minimum of 5-9 years of experience in the Aerospace Industry or in a related field.
Requires proficiency using CATIA V5 and must be highly competent using MS Office products.
Must understand and apply Geometric Dimensioning and Tolerancing.
Must be proficient in PTC CREO Software.

WHY CHOOSE LMI AEROSPACE?

We take care of our people.

401(k) retirement savings plan with a percentage company-match contribution
Competitive wages
Paid holidays
Paid time off
Medical, dental, vision, life, and accidental insurance
Short-term disability
Long-term disability
Employee assistance plan — for access to counseling, consulting and other community resources
Wellness program
Tuition assistance
Subject to eligibility, terms, and conditions

This job description is only a summary of the typical functions of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. The responsibilities, tasks, and duties may differ from those outlined in the job description and other duties, as assigned, may be required. This document does not create an employment contract. Employees of the Company are employed on an “at will” basis and may be terminated at any time.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer


COPY AND PASTE THE FOLLOWING LINK:
https://lmiaerospace.wd1.myworkdayjobs.com/en-US/LMI_Careers/job/Hurst-TX/Design-Engineer-II_R0005454
 
Job Number: R0005454
Job Location: Everett-WA , San Diego-CA, Hurst-TX
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/06/2018
Last Updated: 11/15/2018
Firm Name: LMI AEROSPACE
Attention: Human Resources
Address: 4838 RONSON CT STE R
City, State: SAN DIEGO, CA 92111
800 Phone: 800/677-7868
Website: www.lmiaerospace.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer III

Description:
LMI is a world-class leader in designing, building and manufacturing aerospace structures, systems and components for commercial, business and regional, and military aerospace customers. We employ engineering, manufacturing and testing experts throughout the United States and the rest of the world. Our integrated team approach and full life cycle of capabilities enable our employees to take advantage of a wide range of opportunities for career growth within our organization.

POSITION SUMMARY

We are currently seeking a Design Engineer III in Reno, NV. This position will provide onsite support to the customer and will be the liaison between the customer and offsite Engineering Services project team. This individual will be required to attend customer meetings, answer customer questions, and deliver important information to the offsite team to ensure a successful integration. This individual will work both independently as well as part of the larger engineering team. Tasks will include the development of aircraft sub-systems layouts and the design of individual components, assemblies, and installations. Tasking will include design and integration of aircraft mechanical systems, hydraulic systems, electrical systems, environmental control systems and a variety of other equipment and systems as needed.

ESSENTIAL JOB RESPONSIBILITIES for Design Engineer III in Reno, NV

The Design Engineer III will rely on extensive experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas:

Applies standard engineering practices and techniques, including innovative methodologies, to provide effective solutions to problems involving a wide number of variables.
Review and understand customer’s Statement of Work (SOW), technical specifications, Interface Control Drawings, schedules and budgets.
Create/compile technical documentation that supports evolving/changing designs.
Able to ensure the selection and application of materials and processes are appropriate to each design element with the ability to generate and/or revise specifications when necessary.
Compose compliance matrix to meet customer specification requirements.
Assist in producing engineering quotes to specifications or customer repair demands.
Create Service Bulletins, Repair Schemes and Service Letters that meet the customers’ modifications or repair needs.
Responsible for communicating with customers and suppliers, translating technical information and ensuring compliance to standards and requirements.
In-depth knowledge of standard concepts, practices, and procedures.
Proficiency utilizing CATIA V5 engineering design software.
Works on problems that are complex in scope where analysis of situation or data requires a review of identifiable factors to determine appropriate action.
Ability to guide, mentor and advise other design engineering staff.
Provide direction and serve as expert resource to other department engineers and management team.
Function as an interface to ensure complete understanding of requirements, goals and constraints.
Document issues and communicate to necessary departments, evaluate potential problems and provide risk assessment. Follow-up to ensure that issues have been successfully resolved.
A wide degree of creativity and latitude is expected.
Participate in a variety of process improvement projects.
Will facilitate or lead teams.
Able to support design reviews with preparation and knowledgeable presentation of review material.
Directs work of others and acts as a lead.
Performs other duties as required.
EDUCATION AND EXPERIENCES for Design Engineer III in Reno, NV

Requires a BSME, BSCE, BSAE, or a Bachelor’s degree in a related engineering field and a minimum of 10+ years of experience in the Aerospace Industry or in a related field.
Requires proficiency using CATIA V5 and must be highly competent using MS Office products.
Strong leadership ability and excellent communication skills are necessary.
WHY CHOOSE LMI AEROSPACE?

We take care of our people.

401(k) retirement savings plan with a percentage company-match contribution
Competitive wages
Paid holidays
Paid time off
Medical, dental, vision, life, and accidental insurance
Short-term disability
Long-term disability
Employee assistance plan — for access to counseling, consulting and other community resources
Wellness program
Tuition assistance
Subject to eligibility, terms, and conditions

This job description is only a summary of the typical functions of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. The responsibilities, tasks, and duties may differ from those outlined in the job description and other duties, as assigned, may be required. This document does not create an employment contract. Employees of the Company are employed on an “at will” basis and may be terminated at any time.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer

COPY AND PASTE THE FOLLOWING LINK:
https://lmiaerospace.wd1.myworkdayjobs.com/en-US/LMI_Careers/job/LMI---San-Diego---Remote-California/Design-Engineer-III_R0005438-1
 
Job Number: R0005438
Job Location: Reno, NV
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/06/2018
Last Updated: 11/15/2018
Firm Name: LMI AEROSPACE
Attention: Human Resources
Address: 4838 RONSON CT STE R
City, State: SAN DIEGO, CA 92111
800 Phone: 800/677-7868
Website: www.lmiaerospace.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineers III

Description:
STS Technical Services is Hiring Design Engineers III in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Job Summary:

The Design Analyst is responsible for the engineering, designing, and drafting of tools, gages, lifting devices, work platforms, tail docks, and fall restraint systems to support maintenance on our ground support equipment, aircraft fleets, components, and engine types throughout company operations.

The Design Analyst must have experience in custom design of machinery, tools and prototypes that ensure full adherence to all safety and compliance regulations and standards.

Job Duties & Requirements:

A broad scope of CAD design capabilities are required including:

The generation of 3-D solid models using Autodesk Inventor or Solidworks
These models are utilized for functions including but not limited to Finite Element Analysis, CNC tool paths, 3-D printing and 2-D manufacturing drawings
Additionally, creative problem solving skills are required and are used to resolve complex repair problems in which a solution is undefined
The Design Analyst is a technical representative of company Tooling Services
A qualified applicant must be able to professionally interact with vendors, engineering firms, fabrication and machine shops, and departmental personnel throughout the company
The Design Analyst must have both Mechanical and Structural skills
The Mechanical element includes the designing of jigs, fixtures and gagging
These tools are designed using manufacturer’s part prints, overhaul manual criteria, authorized repair documents, AD Notes and any other applicable information important to the function of the tool
The Structural element includes the design and analysis of maintenance work stands, tail docks and lifting/handling devices
All structural designs must adhere to all applicable standards such as those set forth by AISC (American Institute of Steel Construction), ANSI (American National Standards Institute), AWS D1.1 (Structural Welding Code) and Delta’s SPM (Safety Policy Manual)
The Design Analyst is also responsible for the review and implementation of OEM tool change bulletins

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 44601
Job Location: Atlanta, GA
Duration: Contract
Input Date: 11/08/2018
Last Updated: 11/15/2018
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Design/Data Integrity Engineer

Description:
Design/Data Integrity Engineer in Structural/Mechanical Engineering for Completions Engineering. Responsibilities primarily involve engineering design, modeling, drafting, and checking of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation. At times this position may also be asked to review design work created using either AutoCAD or CATIA V5 and ensure design standards are consistent with company standards and accepted design methods. Engineering design work includes the creation of drawings/models using either AutoCAD or CATIA V5. Design engineer will employ design standards consistent with company standards and accepted design methods. Design assignments are executed under the direction of a Lead engineer or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head. Experience as Design Checker/Data Integrity a plus.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Thirteen (13) yrs. specific technical discipline or fifteen (15) yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Appleton, WI
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/11/2018
Last Updated: 12/07/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

Designer, Bleed Air Systems/Vapor Cycle Systems

Description:
General Summary: 
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.
 
Duties and Responsibilities:

  • Prepare 3D layout models of the BAS and VCS.
  • Prepare 3D installation and detail models of the BAS and VCS.
  • Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
  • Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:

  • Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Education, Work Experience, Certification and/or Licensure:



  • Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

 
Knowledge, Skills and Abilities:


  • Experience using CATIA V5 to prepare 3D parametric models and 2D drawings.  Minimum of 10,000 hours.
  • Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
  • Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.

 
Job Number: 1810094374
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 10/31/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qwfoQAA&URLSource=cjhunter

Designer, Structures - Wing & Fuselage

Description:
PDS Tech is currently recruiting for a long term contract in Greensboro, NC for a Structures Engineer in Wing or Fuselage.
General Summary:

Structures Designer Engineering will serve in a design role and be responsible for conceptual design developing drawings and supporting documents i.e. parts list checklist, E0s. Will support design reviews and PDRs/CDRs.

Duties and Responsibilities:

  • Generates engineering models, drawings, parts list and E0 utilizing CATIA V5
  • Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
  • Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development.
  • Familiarity with structural analysis methods, load paths, and material properties
  • Manages task execution to ensure on-time and on-target completion
  • Perform tolerance and deviation studies. Define detail parts dimensional requirements to meet final design intent.
  • Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producibility
  • Working knowledge of metallic aircraft construction including primary structure, materials processes and tooling.
  • Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions

Education, Work Experience, Certification and/or Licensure:



  • Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
  • Experience in primary and secondary structural design including Wing or Fuselage
  • Must possess a minimum of 2000 hours of experience with CATIA V5 

Knowledge, Skills and Abilities:

  • Knowledge of AMSE Y14.5 dimensioning and tolerancing
  • Possess strong communication skills both verbal and writing skills conducting presentations to internal and external customers
  • Experience with Catia V5
  • Working knowledge of full life cycle drawing approval process including communication with manufacturing, stress, CM, and quality
  • Proficient in Microsoft Office Products

Physical Requirements:

  • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  • Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  • Read, hear, speak, and see with no restrictions, as required by job duties.
  • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  • Effectively communicate in Business English language.
  • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50Ibs or more during the work shift, with the use of Company provided "reach assistance technology" or "movement assist technology" (fork-lifts, pallet jacks, pulleys, dolly's, robotics reach equipment, people movers etc.), as required by job duties.

 
Job Number: 1810086435
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 07/24/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mTmFAAU&URLSource=cjhunter

Designer, Structures - Wing & Fuselage

Description:
General Summary:
Structures Designer Engineering will serve in a design role and be responsible for conceptual design developing drawings and supporting documents i.e. parts list checklist, E0s. Will support design reviews and PDRs/CDRs.  This is a DIRECT position.

Duties and Responsibilities:

  • Generates engineering models, drawings, parts list and E0 utilizing CATIA V5
  • Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
  • Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development.
  • Familiarity with structural analysis methods, load paths, and material properties
  • Manages task execution to ensure on-time and on-target completion
  • Perform tolerance and deviation studies. Define detail parts dimensional requirements to meet final design intent.
  • Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producibility
  • Working knowledge of metallic aircraft construction including primary structure, materials processes and tooling.
  • Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions

Education, Work Experience, Certification and/or Licensure:



  • Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
  • Experience in primary and secondary structural design including Wing or Fuselage
  • Must possess a minimum of 2000 hours of experience with CATIA V5 

Knowledge, Skills and Abilities:

  • Knowledge of AMSE Y14.5 dimensioning and tolerancing
  • Possess strong communication skills both verbal and writing skills conducting presentations to internal and external customers
  • Experience with Catia V5, TeamCenter
  • Working knowledge of full life cycle drawing approval process including communication with manufacturing, stress, CM, and quality
  • Proficient in Microsoft Office Products

Physical Requirements:

  • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  • Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  • Read, hear, speak, and see with no restrictions, as required by job duties.
  • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  • Effectively communicate in Business English language.
  • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50Ibs or more during the work shift, with the use of Company provided "reach assistance technology" or "movement assist technology" (fork-lifts, pallet jacks, pulleys, dolly's, robotics reach equipment, people movers etc.), as required by job duties.

 
Job Number: 1810087974
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 07/03/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002ma7HAAQ&URLSource=cjhunter

Director, Training & Flight Operations

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for Director, Training & Flight Operations, Customer Support Division for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

In this role, you will be responsible for the development and delivery of Regional Jet Customer training, flight manuals and flight operations engineering support. 



  • Training services include the development of courseware, training devices, training manuals and delivery of initial and recurrent training for Pilots, Technical/Mechanics, Cabin Crews, Ground Servicing Crews, and Dispatchers within an airline. In addition, this person must manage the relationship and performance of CAE, the Company's selected training service provider. 
  • Development, verification/validation and certification of flight operations manuals
  • Flight Operations Engineering support to Company's customers


Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team and team structure, implementing governance and communication processes, and evaluating the performance of the group.


Work Location
The Primary Work Location will be Nagoya, Japan.  Travel to USA or other country will be required.

Scope of Work
Specific Training responsibilities include:

  • Overall management of the relationship with and performance of CAE, Company’s training services provider, ensuring training devices and services are high quality at market prices
  • Development and maintenance of training curriculum and courseware for pilots, technicians/mechanics, flight attendants, and flight planning engineers, and ground handling services
  • Development and maintenance of training documentation for each course offered
  • Ensure there are sufficient qualified training instructors located at training delivery sites for the life of the aircraft
  • Ensure training devices (e.g., Full Flight Simulators (FFS), Integrated Procedures Trainers (IPT), Virtual Maintenance Trainers (VMT), Computer Based Training (CBT), Door Trainer and Cabin Trainers) & training facilities meet training objectives and are certified (where applicable) by regulators
  • Obtain regulator certifications such as OSD, FSB, etc.
  • Commitment of training services (both proforma and for fee) to customers as part of the airplane sales process
  • Scheduling customer training at a location that minimizes customer travel costs, meets customer requirements for timing (schedule), and fits within the Company's Training Program strategy.

 
Specific Flight Operations Support responsibilities include:

  • Define the process interfaces with Flight Test organization, Pilot organization and Flight operation engineering organization. 
  • Development, verification/validation, maintenance and delivery of all technical and administrative documents in support of customer’s flight operations.
    • Airplane Flight Manual (AFM)
    • Flight Crew Operating Manual (FCOM)
    • Quick Reference Handbook (QRH)
    • Weight & Balance Manual (WBM)
    • Master Minimum Equipment List (MMEL)
    • Dispatch Deviation Guide (DDG)
    • Flight Crew Training Manual (FCTM)
    • Cabin Crew Operating Manual (CCOM)
    • Aircraft Characteristics for Airport Planning (AC)



  • Ensure documents meet industry standards for content and format by participating in and influencing industry standards board that define flight operations documentation requirements
  • Create airplane performance databases and may provide specialized training courses to customers to assist them in their understanding and use of the airplane and documents listed above.  Such courses may include:
    • Performance Engineers course
    • Weight & Balance course

  • Review and approve requests from airlines for non-normal operations such as flight with missing secondary structure
  • Respond to Flight Operations related Customer Service Requests.  Utilize the Safety Process for emergent Flight Operations related Safety issues.
  • Prepare and Release Flight Operations Bulletins.  MITAC must define both a Routine bulletin type as well as an Alert bulletin type to correspond to the Maintenance related Service Bulletins
  • Define a change process that addresses Flight Operations related changes that may impact the certification basis of the airplane (e.g. Airplane Flight Manual)

Expected Education/Experience and Skills:



  1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
  2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in managerial positions providing Training and/or Flight Operations management functions to commercial airline customers.
  3. Commercial pilots license preferred.
  4. Candidates must have skills and experience managing Partners and Suppliers.

 
Job Number: 1710068573
Job Location: Nagoya,
Duration: 36 months
Input Date: 09/21/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002JqSMAA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Doors Design Engineer

Description:
Responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.

Education, Work Experience, Certification and/or Licensure:
1. BS in Mechanical Engineering with a minimum of 10 years directly related experience designing aviation systems; experience can be substituted for the lack of an appropriate degree
2. Some Travel may be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.
 
Job Number: 28-027
Job Location: Greensboro, NC
Rate: Up to $60/hr, DOE
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 05/25/2018
Last Updated: 11/14/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

ECS & Ice Protection Design Engineer

Description:
PDS Tech is seeking an Ice Protection Design Engineer in Wichita, KS

Responsible for design, development, and certification in the area of systems for new and existing 14 CFR Part 23/25
Responsible for development and documentation of system architecture, system requirements, system schematics and computer simulations, coordination of system test article fabrication and/or validation of initial design through physical test, and certification documentation of aircraft hydraulic systems.
Prepare certification plans, conformity requests, equipment qualification test plans/results, system safety documents, ground and flight test plans/results and certification reports. Reviews engineering drawings for systems prepared using computer based drafting tools (CATIA/CCD and/or CATIA V5).Supplier coordination and review of supplier engineering documents. Troubleshooting activities in both production and field environments.
Support investigation, root cause analysis, corrective action, and ODA/FAA coordination of aircraft field issues and component failures when warranted for certification concerns.
Required: 

o 3+ years of related experience in the design, development and testing of Environmental Control Systems and/or Ice Protection systems on fixed wing aircraft 

o CATIA fluent for preparation of layouts, trade studies, kinematic models, and engineering drawings 

o Aircraft aluminum structure design; familiar with typical fabrication and assembly processes (forming, machining, fastening, etc.) 

o Aircraft mechanical system design 

o Preferred: CATIA V6 and Enovia experience
 
Job Number: 1810090601
Job Location: Wichita, KS
Duration: 12 months
Input Date: 10/26/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mkd4AAA&URLSource=cjhunter

ECS & Pneumatic Subsystems Engineer

Description:
Seeking an ECS & Pneumatic Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Environmental Control System (ECS), Cabin Pressurization, Oxygen System, Anti-Ice System and Bleed Air Management for a supersonic business jet. The successful candidate will manage the ECS & Pneumatic systems design and system suppliers, as well as all design and certification activity required.

Duties include, but are not limited to:
• Develop ECS & Pneumatic systems design, architecture and product plans, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of ECS & Pneumatic systems
• Define requirements for the ECS & Pneumatic systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of ECS & Pneumatic systems requirements
• Perform ECS & Pneumatic systems tests and certification, and provide system and certification documentation
• Manage the ECS & Pneumatic subsystem scheduling, budget, resources and suppliers
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort.
• She/he will prioritize the allocation of the ECS & Pneumatic resources to meet the milestones of the program schedule, from concept through certification.

Minimum Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure/confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in ECS systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing ECS systems from concept through certification strongly desired
• Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
 
Job Number: 42-001
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 12/03/2018
Last Updated: 12/10/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

EMBEDDED SYSTEM ENGINEER

Description:
JSG is hiring an Embedded System Engineer for a 15+ months contract opportunity in Stratford, CT!

Description:

Ground Test Engineer - Supports, performs, and manages a specific function within a larger mechanical system, often including hardware and mechanical parts.
Responsible for projects with significant scope and complexity covering all aspects of Ground Testing helicopter components and systems.

Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.
Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports.
Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems.

This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.
Test programs typically involve full scale fatigue and static evaluations of dynamic components, main and tail rotor whirl tests, airframe static tests, airframe shake tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight.
Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft, and oversight of supplier performed component qualification efforts.
 
Job Number: 368042
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 08/31/2018
Last Updated: 12/09/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

ENGINEERING GROUND TEST LABORATORY TECHNICIAN

Description:
Engineering Ground Test Laboratory Technician

Stratford, CT

15+ Months Contract Opportunity



Structural lab technician capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.

Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
Must possess skills and aptitude to operate test facilities and data acquisition systems.
 
Job Number: 367128
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 08/31/2018
Last Updated: 12/09/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

ENGINEERING INSTRUMENTATION STRAIN GAGE TECHNICIAN

Description:
Engineering Instrumentation Strain Gage Technician

Stratford, CT

15+ Months Contract Opportunity

Perform strain gage installations required to support ongoing Engineering Flight and Ground test operations.

Must have knowledge of strain gage bridge wiring methodology.
Must be able to apply gages to aircraft and facility components manufactured from of a variety of metals and composites making them Load Measuring Sensors.
Must have experience and ability to accomplish required surface preparation, strain gage measurement, layout, alignment and bonding.
Must have experience with measurement systems, instrumentation wiring, documentation, and Wheatstone Bridge wiring of strain gages to measure Torque, Axial Load, Bending and Shear strain.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
 
Job Number: 367119
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 08/31/2018
Last Updated: 12/09/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

EPS Engineer

Description:

The Engineer shall work and coordinate design, development and tests for electrical systems and components. This includes interfacing with all other aircraft functions and engineering teams to coordinate and obtain approval of any task assigned contributing to the aircraft and Electrical Power System development and Certification.

Scope of Work:



(1) will work as a team member of Electrical Power System Team, Electrical Power and Lighting System Design Group.



(2) Basic work scope is to develop and finalize the designs of electrical power switching equipment, power distribution equipment, and power conversion equipment such as inverters in order to structure Electrical Power Systems.



(3) This scope of activity involves:



(a) Evaluating the current aircraft design, with respect to compliance to the Electrical Power System related airworthiness regulations of JCAB, FAA and EASA,



(b) Coordinating integration of design change activities originated from Electrical Power Supply System or when requested by a system that interfaces with the electrical power system.



(c) Presenting and discussing the Electrical Power Supply System compliance with the Certification Authorities.



(d) Leading verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.



(4) All tasks required to perform above activities is considered within work scope; initiating/ reviewing related documents, technical calculation, interface discussion with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners/suppliers.



(5) Coach and mentor members about professional knowledge on the Electrical Power System.



(6) Manage/discuss the technical contract requirements with applicable Electrical Power System suppliers and other interfacing suppliers as appropriate.



(7) Provide expertise to assist in resolving the Electrical Power System performance during any rig testing or Flight testing.


Requirements
More than 10 years of experience in aerospace EPS
Good English verbal, writing skills
Motivated to work in Japan
 
 
Job Number: 1810086448
Job Location: Nagoya,
Duration: 24 months
Input Date: 07/18/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mTnNAAU&URLSource=cjhunter

EWIS Expert

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for EWIS Expert for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

As a global engineering expert in aircraft Electrical Wiring Interconnection Systems, you will coordinate with contracted suppliers, interface with all other aircraft functions and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft System development and Certification;
 
Scope of Work:
         Work as Global engineering expert as part of the EWIS team
         Basic work scope is to participate in the development and finalization of the aircraft T/C design, compliant to all applicable requirements.
         This activity includes:



  • Evaluating the current aircraft design, with respect to compliance to the EWIS related airworthiness regulations of JCAB, FAA and EASA,
  • Coordinate activities related to defining the ESSDs required to generate wiring diagrams
  • Support verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.
  • Coordinating integration of design change activities originated from EWIS requirements when required, run unit base and manage aircraft level changes for EWIS group
  • Responsible for tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, technical calculation, interface discussions with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
  • Coaching and Education of company members about professional knowledge in the EWIS domain.
  • Interface with other suppliers as appropriate.
  • Provide technical expertise and assist in resolving the EWIS issues during any rig testing or flight testing.
     


 



 
Job Number: 1710075244
Job Location: Nagoya,
Duration: 12 months
Input Date: 03/16/2018
Last Updated: 12/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023L1VAAU&URLSource=cjhunter

Electrical Design Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

1) AutoCAD required, Catia V5and CHS preferred
2) Electrical system design experience preferred
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design
8) Familiarity with aircraft STC procedures preferred.
9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required
 
Job Number: 24-288
Job Location: Savannah, GA
Rate: $68/hr
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 12/03/2018
Last Updated: 12/10/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Electrical Design Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1) AutoCad required, Catia V5and CHS preferred
2) GV,GVI, and GVII electrical system design experience preferred.
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design
8) Familiarity with aircraft STC procedures preferred.
9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 9857
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/24/2018
Last Updated: 12/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Electrical Design and Analysis Engineer 4 at Huntington Beach, CA

Description:
Design and Analysis Engineer 4

Location: Huntington Beach, CA
Duration: 6+ months

Description:
Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for Automatic Test Equipment (ATE). Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

Required Skills:
Knowledge of ATE design to meet unit under test (UUT) electrical, interface, and communication protocol requirements. Experience with ATE Engineering, knowledge of test instruments device driver wrappers and self-test software development.

Preferred Additional Skills:
Experience in software development using C, C++, C# and/or ATLAS. Experience in software development using LabWindows/CVI. Knowledge of the following aircraft communication protocols: 1553, ARINC 429, RS-232, RS-422, and Ethernet.

Education / Experience:
Bachelor's and 9 or more years' experience, master’s with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code:
664-Electronic Sys Design & Analy
 
Job Location: Huntington Beach, CA
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 09/13/2018
Last Updated: 12/13/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: mzoheb@iconma.com
Website: iconma.com

Electrical EWIS Engineer

Description:
Electrical EWIS Engineer Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative 

Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required





Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job. 
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/04/2018
Last Updated: 12/07/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
We are seeking an Electrical Engineer with a strong avionics/electrical systems background for our client in Kansas! Apply today to work with a well-known company within the aviation industry!

The ideal candidate for this position will perform the following tasks:
* Responsible for developing and completing complex engineering designs. Ensures designs meet or exceed customers’ expectations and Cessna Quality and Safety standards.
* Works with Service Center personnel in reviewing customer requests for aircraft installations.
* Evaluates feasibility of the requested alterations and provides alternate solutions if necessary.
* Monitors and researches new technologies and FAA mandates for potential project opportunities to support theaftermarket.
* Guides and directs activities to ensure timely and efficient completion of assigned projects.
* Development of program schedules outlining key deliverables and establishing time lines for completion of tasks,
* Responsible for identifying FAR’s (Federal Aviation Regulations) applicable to any given project and establishing a means of compliance for those regulations.

Qualifications and Experience:
* Bachelor of Science in Engineering (Electrical/Mechanical) or related field
* Requires a strong avionics/electrical systems background

The ideal candidate for this position will possess the following skills and characteristics:
* Ability to conduct avionics and electrical systems testing both on and off the aircraft.
* Ability to develop wiring diagrams utilizing company electronic drawing tools is preferred.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127693
Job Location: Wichita, KS
Duration: 6 mos
Start Date: ASAP
Input Date: 11/09/2018
Last Updated: 11/27/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
AutoCad required, Catia V5and CHS preferred. 14 CFR 25 Subpart H - EWIS experience preferred. Part 25 Certification Experience for Cabin Interiors preferred. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. Experience with power distribution, lighting, switching, sizing and routing. 7) Familiarity in mechanical system design. Familiarity with aircraft STC procedures preferred. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.
 
Job Number: 18-140257
Job Location: Southeast
Per Diem: Split
Overtime: Possible
Duration: Year +
Start Date: ASAP
Input Date: 11/27/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Electrical Engineer

Description:
Electrical Engineer reports to the Engineering Supervisor, the Electrical Engineer will be responsible for the planning, design and oversight of the installation, operation and maintenance of electrical components, equipment and systems.  They will perform standard engineering assignments usually representing a significant portion of a larger project and will select engineering techniques to solve problems and make design recommendations.





Electrical Engineer participates as a team member in a specific phase of a broad engineering assignment.
Directs preparation of appropriate documentation for assigned projects.
Provides technical leadership to a small group of temporarily assigned engineers and technicians.
Ensures successful completion of the assigned project phase within the budgeted time and cost constraints.
Participates in defining engineering approaches, and in planning and scheduling work.
Cover the capacity gaps in documentation for delivery milestones.






Bachelor’s Degree from a four-year college or university and a minimum of five (5) years’ experience 




Aircraft electrical design experience
Experience with Catia
 
Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/02/2018
Last Updated: 12/07/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

Electrical Engineer (Level 2) - SC - OM

Description:
Chipton-Ross is seeking an Electrical Engineer - Level 2 located in Greenville, SC

RESPONSIBILITIES:
The ideal candidate will be responsible for providing electrical engineering avionics designs in support of CNS/ATM upgrade on a C-130H aircraft. This includes development/design of block diagrams, wiring diagrams, and cable assemblies in CADAM for avionics system installations.

REQUIRED EXPERIENCE:
Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.
Experience with aircraft architectures and electrical integration of avionics subsystems is Required.
Ability to understand schematics, generate interconnect diagrams and troubleshoot equipment installation.
Must be experienced with CADAM design software for electrical design.

EDUCATION:
Accredited Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design is Required.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time/First Shift

 
Job Number: 174989
Job Location: Greenville, SC
Rate: $DOE
Duration: 12 MONTHS
Input Date: 11/07/2018
Last Updated: 12/13/2018
Firm Name: CHIPTON ROSS
Attention: Lucas Medina
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmedina@chiptonross.com
Website: www.chiptonross.com

Electrical Power Generation and Distribution Engineer

Description:
• Electrical Power Generation and Distribution Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Electrical Power Generation and Distribution Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Electrical Power Generation and Distribution design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-007
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 12/03/2018
Last Updated: 12/10/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: Matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Electrical Subsystems Lead Engineer

Description:
Seeking an Electrical Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Electrical Power Generation System (EPGS), Electrical Power Distribution System (EPDS), Electrical Wire Interconnection Systems (EWIS) and the Science of Electrical Engineering (G&B, EMC, EMI, HIRF, LSP, etc.). The successful candidate will manage the various electrical systems design and completion partners, as well as all design and certification activity required. The Electrical Subsystem Lead Engineer will report to the Director of Subsystems IPT.

Duties include, but are not limited to:
• Develop electrical systems design, architecture and product plan, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of electrical systems
• Define requirements for the electrical systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of electrical systems requirements
• Perform electrical systems tests and certification, and provide system and certification documentation
• Manage the electrical subsystem scheduling, budget, resources and suppliers
• Report subsystem status to ensure milestones are met in support of the overall program schedule
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort. She/he will prioritize the allocation of the Electrical subsystem resources to meet the milestones of the AS2 program schedule, from concept through certification.

Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12.
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Electrical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in Electrical systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing electrical systems from concept through certification strongly desired
 
Job Number: 42-004
Job Location: Reno, NV
Rate: DOE, but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 12/03/2018
Last Updated: 12/10/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: Matt@precisionpersonnel.com
Website: www.precisionpersonnel.com