Job Search Results

603 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/01/18 Friday 04:32AM Pacific Time by ContractJobHunter. )

Listings 1 - 603

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2409 - DESIGNER - INTERIORS - cv, word doc only

Description:
Produce Regional Aircraft interface and installation drawings of interior components (cabin shell items, lavatories, galleys, wardrobes, electrical connections, piping, storage modules and structural provisions) while interacting with other groups like stress, systems design, methods, production, interior suppliers and customer design engineering.

Integrate partners to the program

Perform review of designs with interpretation of industry regulatory requirements and design practices.

Prepare and review certification reports associated to new interior certification requirements.

Support suppliers and production personnel's

Technical or Engineering degree in Aeronautical or Mechanical Engineering

Ffive (5) to seven (7) years of related experience

Knowledge of CATIA V5, Enovia is required

Knowledge of CATIA V4 is an asset

Bilingualism (English and French) is an asset
 
Job Number: 2409
Job Location: Mirabel, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 10/30/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2419 - AVIONICS SYSTEMS INTEGRATOR - cv, word only

Description:
Be responsible, as an Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Client aircrafts.

Be responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate in the Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Client Flight Test Center in development and certification tests: witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Client program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.

University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent.

At least five (5) years of relevant experience with the design, development, integration and certification of Avionics systems.

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Have a good knowledge of RTCA documents DO-178 and DO-160.

Familiar with part FAR25/525 certification process and with the ARP4754 standard.

Experience with civil aircraft and airworthiness authorities.

Are proficient with the use of Microsoft Office software tools to produce presentation and reports.

Have the ability to work well in a team environment.

Have strong communication skills (written and spoken).
 
Job Number: 2419
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/04/2019
Last Updated: 01/17/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2469 - AVIONICS/ELECTRICAL SYS. - AFTERNOON, MIDNIGHT & WEEKEND SHIFT

Description:
Provide Avionics Engineering support to the Client Final Line Assembly during afternoon, midnight and weekend shift.

Witness system functional testing and conduct technical investigations on Electrical and Avionic systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests.

Track and ensure successful implementation of systems installations and modifications.

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes.

Develop good working relationships with various departments within BA and with all suppliers.

Bachelor of Engineering Degree and eligibility for Professional Engineer registration.

AME license is an asset.

Experience in providing engineering support to a Final Line/ Production.

15 years' experience in aircraft electrical systems and or avionics systems (Electrical Generation, Distribution, Lighting, Navigation, Communication, Displays, EICAS, Data Concentration System, AFCS, Stall System, OMS, FDR, CVR etc).

Conversant with design, qualification and certification test requirements of Aircraft Electrical and or Avionic systems.

Have flexibility to travel.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Familiar with Microsoft Office software tools.

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Regular work day, some flexibility required:

Afternoon Shift (3:30 to 12:00) ;

Midnight Shift = (11:00 PM to 6:30 AM);

Weekend Shift = Friday, Saturday, Sunday and Monday.
Friday (3:30 PM -12:00 (midnight)),
Saturday (6:00 AM to 6:00 PM),
Sunday (6:00 AM to 6:00 PM)
Monday (8:00 AM 8 to 4:30 PM)
 
Job Number: 2469
Job Location: Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/04/2019
Last Updated: 01/17/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2494 - SYSTEMS INTEGRATION - INTERIORS - cv, word doc only

Description:
Act as an engineering integrator for the definition, specification and interfaces, design, analysis, interface with suppliers, development, test and certification for Client Inflight Entertainment, Connectivity and In Seat Power Supply System.

Support other interior systems such as:
Cabin Management System
Water and Waste System, Oxygen System
Interior Lighting System
Electrical provisioning for Galley appliances
Flight Deck Remote Access and Flight Deck Door Surveillance System

Review, assess and approve engineering documentation and drawings.

Interface with other specialist work packages, such as installations, stress, EMI, e.t.c to ensure your assigned systems optimization on Aircraft.

Bachelor Degree or equivalent in Mechanical or Electrical Engineering

Minimum of 10 years of engineering experience dealing with Aircraft systems, preference will be for previous experience with above mentioned prime responsibility systems.

Experience with MS Office; CATIA and Enovia skills will be a definite asset.

Familiar with the specification, design, integration, certification and acceptance of Aircraft systems equipment. (knowledge on DO-160 regulation will be an asset)

Have good oral and written skills in English; French will be a definite asset.

Have the ability to work with minimum supervision and you are a team player

Have initiative, a strong sense of responsibilities and good technical judgment.

Have strong leadership to conduct a team in successful achievement of milestone in multidisciplinary technical team.

Must have good knowledge of electrics and avionics.
 
Job Number: 2494
Job Location: Mirabel, Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 09/12/2018
Last Updated: 10/30/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2500 - ELECTROMAGNETIC COMPATIBILITY (EMC) ENGINEER - cv, word doc only

Description:
Responsible at the aircraft and system level for Electromagnetic Compatibility (EMI)/High Intensity Radiated Fields (HIRF)/Lightning Strike/ Electrostatic Discharge technical requirements.

Knowledge of relevant industry standards (RTCA/DO-160, SAE ARP) and high level of familiarity with airworthiness (TCCA, FAA, EASA) Regulations and Advisory Materials pertaining to EMI, HIRF, Lightning and Electrostatic Discharge.

Execute intermediate to complex engineering assignments related to EMI, HIRF, and Lightning and Electrostatic Discharge requirements.

Analyze new systems designs, assess technical impacts, propose EMC compliance approaches, review/approve technical documents, test plans, test procedures and test reports, and check compliance with certification regulations.

Define scope of work for EMC effort of technical/engineering projects, estimate the time required, plan, highlights technical risks and execute according to priorities.

Define technical requirements, test requirements and perform detailed analysis to ensure aircraft and systems compliance to EMC certification regulations.

Prepare EMI, HIRF, Lightning and Electrostatic Discharge test procedures, execute tests in laboratories and on aircraft and generate results and analysis test reports.

Support and witness EMC tests in Canada, United States and Europe as needed.

Master degree in Electrical or EMC Engineering, or alternatively a Bachelor's degree in Electrical or Physics Engineering with a minimum of eight (5) years of experience in aircraft EMC/HIRF/Lightning/Electrostatic Discharge (FAR 25.981 is an asset).

8 years of experience or more in an aerospace manufacturing company.

Have EMC bench and/or aircraft testing experience.

Have a minimum of five (5) years working experience with systems qualification/certification.

Knowledge of harness design, aircraft design principles including familiarity with aircraft regulatory requirements.

Proficient with the use of PC including Microsoft Office software tools.

Energetic person with strong written and oral communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Must be familiar with DO160, STD ARP, MIL STD, FAA regulations, as well as other applicable airworthiness regulations.

Must be able to analyze modifications at aircraft level and check compliance with certification regulations.

Must be able to support and witness EMC tests in Canada, United States and Europe as needed.
 
Job Number: 2500
Job Location: Montreal, Canada
Rate: 52.00
Per Diem: Paid 3 Months only
Overtime: Paid NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 01/04/2019
Last Updated: 01/17/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2504 - LIAISON ENGINEER (MRB)-2504 - cv, word doc only

Description:
Disposition documentation to resolve fit, form or functional issues on A/C components.

Support to Production, Design Engineering, Procurement & Quality in coordinating resolutions to issues.

Review & trouble shooting of A/C Systems in conjunction with design Engineering as required.

Review & disposition of A/C Wiring & Electrical issues in conjunction with Design Engineering as required.

Corrective Action requests involving Engineering as required.

Obtain & Interface with Design Engineering experts on appropriate issue resolution.

Interpret engineering drawings, specs & provide guidance to junior employees.

Provide status, updates & keep current on information regarding manufacturing changes & problems.

Job is located in Toronto and is for weekend afternoon shift coverage

Bachelor or Masters degree in Aeronautical or Mechanical Engineering from an accredited University.

Minimum of ten years MRB experience or design experience in Aerospace

Possess good knowledge of aircraft structure & system installation technical requirements, aircraft materials and hardware, standards and specifications

Electrical & Systems experience as this would be considered an asset

Person with excellent communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment

Have previous CATIA, Design and MRB experience including support to production would be considered an asset.

Have previous experience as a Mentor and Coach in either Liaison team environment or working with problem solving teams is an asset

Are flexible with work schedule as this position requires weekend work on a rotating schedule and some travel and short-term relocation assignments, and it work day is Weekend-Afternoon Shift .
 
Job Number: 2504
Job Location: Toronto, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/28/2018
Last Updated: 12/05/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
We have an urgent need for contract Aerospace Mechanics here in Moses Lake, WA. This is a very high paying position. The position also has opportunities to become full time.

Job Duties and Responsibilities

Service, repair, troubleshoot and modify aircraft and aircraft engines.
Repair, replace and rebuild aircraft structures, system and functional components.
Assemble and install electrical, plumbing, mechanical, hydraulic, structural components and accessories using hand tools and power tools.
Adjust, align and calibrate aircraft systems using hand tools, gauges and test equipment, machines and equipment such as shears, sheet metal brakes, welding equipment, pneumatic tools.
Research and understand FAA technical data relevant to assigned tasks.
Maintain the premises in a clean and organized manner.
Remove and/or install aircraft components, test IAW MM, and troubleshoot aircraft systems.


Requirements
Knowledge/Skills/Abilities

Strong knowledge in FAA regulations, Aviation Rules (FOD’s, Safety, Quality, Hazardous Materials, Aircraft Marshalling), aerodynamics, aircraft electrical systems, materials science, aircraft maintenance, electrical testing, instrumentation, gas turbine and piston power plants.
Good leadership (individual contributor) presence:
Able to lead by example and live/work by company values.
Ability to successfully contribute to a positive and productive work environment.
Able to instill a sense of urgency in team members.
Able to be patient and objective in difficult situations with different types of people.
Good customer service tool box:
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong follow-through, quick thinking and resourceful.
Ability to remain calm, cool and collected in stressful situations.
Strong sense of urgency to address and solve important issues.
Good organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Ability to work in a progressive, fast-paced environment (work well under pressure).
Good analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Good communication skills (oral, written) with customers.
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Good interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office, including Word, Excel, Outlook, and PowerPoint.
Education

Associate’s Degree (or Technical School equivalent) in Aircraft Maintenance or related field from an FAA accredited school.
A&P Certificate.
Japanese Bilingual preferred.
Experience

Three (3) plus years of aircraft mechanical experience preferred.
 
Job Location: Moses Lake, WA
Input Date: 10/29/2018
Last Updated: 12/13/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

AIRFRAME & POWERPLANT TECHNICIAN

Description:
Johnson Service Group is currently seeking a Airframe & Power Plant Technician to work for our client.

Adjusts, aligns, and calibrates aircraft systems, using hand tools, gauges, and test equipment.
Examines and inspects engines or other components for cracks, breaks or leaks.
Disassembles and inspects parts for wear, warping, or other defects.
Assembles and installs electrical, plumbing, mechanical, hydraulic and structural components and accessories using hand tools and power tools.
Services and maintains aircraft systems by performing tasks, such as flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.
Repairs, replaces and rebuilds aircraft structures, functional components, and parts, such as wings and fuselage, rigging and hydraulic units.
Reads and interprets manufacturers and airline’s maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components
Tests engine operating, using testing equipment to locate source of malfunction.
Minimum Education, Licensure, or Certification (or Substitute Experience) Required:

Airframe and Power plant License Required, high school diploma or equivalent required.
Basic knowledge of operating a personal computer or laptop.
Knowledge of job-specific machines and tools, including their designs, uses, repair, and maintenance.
Capable of repairing machines or systems using the needed tools
Ability to determine the kind of tools and equipment needed to do a job
Able to perform routine maintenance on equipment and determine when and what kind of maintenance is needed.
Capable of determining causes of operating errors and deciding what to do about it.
Able to perform tests and inspections of products, services or processes to evaluate quality or performance.
Able to install equipment, machines, wiring, or programs to meet specifications
Ability to control operations of equipment or systems
Ability to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Able to monitor gauges, dials or other indicators to make sure a machine is working properly.
Minimum Experience Required:

Minimum 1-2 years’ experience performing scheduled and unscheduled maintenance to include: 12/24/36/72 month inspections on charter and/or corporate mid-size jets.
Gulfstream model experience preferred.
 
Job Number: 368921
Job Location: Van Nuys, CA.
Per Diem: If Qualified
Overtime: Possible
Duration: Temp-Direct
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 01/17/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

Aeronautical Engineer

Description:
Location: Palmdale, CA
Rate: $69.80/HR
Duration: 1 year W2 contract
Shift: 9/80-A
Per Diem Split: Yes (if eligible)
Overtime: Possible

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '


Required Skills:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****
- Catia V5 experience is required.
- Airframe experience is required.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.

Education:
- BS+9-15 YRS or MS+7-13 YRS required.
 
Job Number: 9610
Job Location: Palmdale, CA
Rate: $69.80/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 01/14/2019
Last Updated: 01/15/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Aeronautical Engineer / Catia V5 airframe design composites Fibersim - Clearance CA

Description:
1090-1 Aeronautical Engineer / Catia V5

Work Location: Palmdale, CA
Status: Open

Qty: 4
Desired Start Date: 8/13/2018
End Date: 8/30/2019

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe experience is required.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS

Experience
Areas of Expertise CATIA 4 - 6 Years
Areas of Expertise Composites and Materials 2 - 4 Years
Work Schedule: 9/80-A

2+ (4,000 hrs) CATIA V5 Experience Highly desired
Will accept qualified experience in lieu of degree.
 
Job Number: JE-1090-1S5
Job Location: Palmdale, CA
Rate: 70/hr DOE
Per Diem: no
Duration: 12 months
Input Date: 01/17/2019
Last Updated: 01/17/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aerospace Engineer - Air Systems

Description:
  1. Support Flight Testing Activities, including but not limited to:
    1. Discuss and review test plans and preparation activities.
    2. Help determine test specifications (based upon system architecture).
    3. Attend Ground/Flight Test briefing and debriefings
    4. Participate in Test Readiness Reviews and ensure on-time Engineering deliverables.
    5. Generate developmental engineering drawings and instrumentation change requests as required.
    6. Monitor live flight data, typically via telemetry, during flight test on aircraft.
    7. Create and review Aircraft Restrictions
    8. Create and review Aircraft Troubleshootings
    9. Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
    10. Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
    11. Process, analyze, and draw conclusions from post flight data.
    12. Identify non-conformances, quality escapes, etc. to create rejection tags.
    13. Make assessments to ensure safety of flight determination.
    14. Document flight test design problems for long term fix.
    15. Generate and review appropriate limitations documentation.
    16. Write flight test results reports.

  2. Complete special projects and tasks assigned by Group Lead.

  • Level Requirements (Minimum):
    Education
     
  • Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation). 
    • Other Engineering fields may be considered.

  • Experience
     
  • Four (4) years aerospace engineering experience in air systems, including experience in aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.



Knowledge/Skills/Abilities:
 
  • Strong knowledge of flight test operations and flight certification, including knowledge of aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.
  • Good leadership presence as well as people management skills: 
    • Future-oriented in thinking and operation.
    • Able to lead by example and live/work by company values.
    • Ability to successfully contribute to a positive and productive work environment.
    • Able to instill a sense of urgency in team members.
    • Able to be patient and objective in difficult situations with different types of people.

  • Strong skill set for: 
    • Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
    • Strong follow-through, quick thinking and resourceful.
    • Ability to remain calm, cool and collected in stressful situations.
    • Strong sense of urgency to resolve the issue.

  • Strong organizational, time management and prioritization skills:
    • Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
    • Able to be flexible with attention and priority.
    • Ability to work in a progressive, fast-paced environment (work well under pressure).

  • Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
  • Strong communication skills (oral, written, presentation) with both external and internal team.
    • Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
    • Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
    • Excels at communicating clearly and effectively verbally. Strong proficiency in writing summaries, documents, reports, and presentations.
    • Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
    • Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
    • Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems. 
    • Proven track record of improving the efficiency of assigned processes or procedures.
       
       


 
Job Number: 1810087672
Job Location: Seattle, WA
Duration: 6 months
Input Date: 06/27/2018
Last Updated: 01/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mYpuAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer - Avionics

Description:
The Aerospace Engineer, Avionics position located here in Moses Lake, WA is responsible for supporting for the focal avionic systems engineer in developing, testing and certifying systems for a project. This role requires the significant exercise of independent discretion and judgment in matters of significance.


Job Duties and Responsibilities:

Review and support Avionics Certification Activities.
Create and review Certification Plans.
Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Reports.
Review qualification by similarity and/or analysis reports.
Review system safety documents (PSSA, SFHA, ADHA, SSA and Particular Risk Analysis).
Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
Perform Component Drawing Reviews.
Complete aircraft assembly and installation drawing reviews.
Participate in System Design Reviews.
Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
Coordinate with certification authorities to seek clarification on requirements.
Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.
Create, review and approve interface control documents and any sub level writing interface documents.
Support Avionics Flight Testing Activities, including but not limited to:
Discuss, write and review test plans and preparation activities with flight test team.
Help prepare and review pre and post flight briefing.
Monitor live flight data, typically via telemetry, during flight test on aircraft.
Process, analyze, and draw conclusions from post flight data.
Make assessments to ensure safety pf flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate limitations documentation.
Complete special projects and tasks assigned by Group Lead.



Requirements
Knowledge/Skills/Abilities

Knowledge of system development activities and flight certification activities, including knowledge, skills and competency with avionic systems utilized in vehicle design (Comm/Nav/Surveillance/FMS/Displays/Recorders/CPDLC/CAS/antenna installations/VHF).
Good leadership presence as well as people management skills:
Future-oriented in thinking and operation.
Able to lead by example and live/work by company values.
Ability to successfully contribute to a positive and productive work environment.
Able to in still a sense of urgency in team members.
Able to be patient and objective in difficult situations with different types of people.
Strong customer service tool box:
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong follow-through, quick thinking and resourceful.
Ability to remain calm, cool and collected in stressful situations.
Strong sense of urgency to resolve customer needs.
Strong organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Ability to work in a progressive, fast-paced environment (work well under pressure).
Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Strong communication skills (oral, written, presentation) with both external and internal customers.
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
Excels at communicating clearly an effectively verbally, Strong proficiency in writing summaries, documents, reports, and presentations.
Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all level of the organization.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems.
Proven track record of improving the efficiency of assigned processes or procedures.
Education

Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Other Engineering fields may be considered.
Experience

Aerospace engineering experience in Electrical Systems, including experience in the electrical aspects of the various systems and components and/or controllers on the airplane (Comm/Nav/Surveillance/FMS/Displays/Recorders/CPDLC/CAS/antenna installations/VHF)
 
Job Location: Moses Lake, WA
Input Date: 07/17/2018
Last Updated: 12/13/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer - Electrical Systems

Description:
Role Description

The Aerospace Engineer, Electrical Systems position located here in Moses Lake, WA is responsible for supporting for the development, testing and certification of the electrical aspects of the various systems and components and/or controllers on the airplane (e.g. ECS, fuel, hydraulics, engines, fire protections, anti-ice, lights, electrical power, wiring, etc.). The role requires the significant exercise of independent discretion and judgment in matters of significance.



Job Duties and Responsibilities:

Review and support Certification Activities.
Create and review Certification Plans.
Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Plans.
Review qualification by similarity and/or analysis repots.
Review system safety documents (PSSA, SFHA, ADHA, SSA and Particular Risk Analysis).
Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
Perform Component Drawing Reviews.
Complete aircraft assembly and installation drawing reviews.
Participate in System Design Reviews.
Coordinate with suppliers.
Coordinate with certification authorities.
Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.
Support Flight Testing Activities, including but not limited to:
Help determine test specification definition.
Discuss, write and review test plans and preparation activities with flight test team.
Help prepare and review pre and post flight briefing.
Monitor live flight data, typically via telemetry, during flight test on aircraft.
Process, analyze, and draw conclusions from post flight data.
Identify non-conformances, quality escapes, etc. to crate rejection tags.
Make assessments to ensure safety pf flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate limitations documentation.
Write flight test result reports.
Electrical Systems.
Creating instrumentation definitions for the electrical systems (locations of instrumentation, sample rates, unit definitions, etc.)
Release of engineering documentation for component changes and new installation, ensuring appropriate configuration control
Complete special projects and tasks assigned by Group Lead.


Requirements
Knowledge/Skills/Abilities

Knowledge of flight test operations and flight certification, including knowledge of electrical aspects of the various systems and components and/or controllers on the airplane.
Good leadership presence as well as people management skills:
Future-oriented in thinking and operation.
Able to lead by example and live/work by company values.
Ability to successfully contribute to a positive and productive work environment.
Able to instill a sense of urgency in team members.
Able to be patient and objective in difficult situations with different types of people/
Strong customer service tool box:
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong follow-through, quick thinking and resourceful.
Ability to remain calm, cool and collected in stressful situations.
Strong sense of urgency to resolve customer needs.
Strong organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Ability to work in a progressive, fast-paced environment (work well under pressure).
Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Strong communication skills (oral, written, presentation) with both external and internal customers.
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
Excels at communicating clearly an effectively verbally, Strong proficiency in writing summaries, documents, reports, and presentations.
Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all level of the organization.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems.
Proven track record of improving the efficiency of assigned processes or procedures.
Education

Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Other Engineering fields may be considered.
Experience

Aerospace engineering experience in Electrical Systems, including experience in the electrical aspects of the various systems and components and/or controllers on the airplane (e.g. ECS, Fuel, hydraulics, engines, fire protections, anti-ice, lights, electrical power, writing, etc.).
 
Job Location: Moses Lake, WA
Input Date: 07/17/2018
Last Updated: 12/13/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Aircraft Assembly Technician

Description:
PDS Tech is seeking an Aircraft Assembly Technician for an open position in Mesa, AZ.
In your role, you will:

  • Assemble, disassemble, install, test and troubleshoot mechanical and electrical assemblies and subassemblies on aircraft systems.

    Follow computer based and other specific processes and systems, including manufacturing planning, wiring diagrams, system schematics, process specifications, engineering sketches, and other forms of written and oral instructions. Follow specific tool control, FOD control and safety guidelines and policies.

High School Diploma or GED
At least 2 – 3 years recent experience with mechanical, electrical/avionics, sheet metal or composites on aircraft systems. Need experience and proficiency in any or all of the following: Flight Control systems (build, install and rig), Fuel system installations, Avionics, aircraft wire installation, Engine (build and install), Canopies and Doors. Rotorcraft experience preferred. A & P License preferred.
 
Job Number: 1810088233
Job Location: Mesa, AZ
Duration: 12 months
Input Date: 09/06/2018
Last Updated: 01/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mindy Moore
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mb79AAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Electrical Design Engineers

Description:
*Must have Degree
*Electrical Subsystems & Aircraft Background
*Video Display
*I/O Systems
- Develop and document the electronic and electrical system requirements and designs.
- Perform system tests to verify operational and functional requirements.
- Support the resolution of product integration issues and production anomalies

Email resumes to: mmccarthy@pdstech.com
 
Job Number: Bo-Electric
Job Location: St. Louis, MO
Rate: $70.00-$75.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 10/02/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Aircraft Mechanics

Description:
Role Description
  1.  Service, repair, troubleshoot and modify aircraft and aircraft engines.
  2. Repair, replace and rebuild aircraft structures, system and functional components.
  3. Assemble and install electrical, plumbing, mechanical, hydraulic, structural components and accessories using hand tools and power tools.
  4. Adjust, align and calibrate aircraft systems using hand tools, gauges and test equipment, machines and equipment such as shears, sheet metal brakes, welding equipment, pneumatic tools.
  5. Research and understand FAA technical data relevant to assigned tasks.
  6. Maintain the premises in a clean and organized manner.
  7. Remove and/or install aircraft components, test IAW MM, and troubleshoot aircraft systems.

Knowledge/Skills/Abilities:
 
  • Strong knowledge in FAA regulations, Aviation Rules (FOD’s, Safety, Quality, Hazardous Materials, Aircraft Marshalling), aerodynamics, aircraft electrical systems, materials science, aircraft maintenance, electrical testing, instrumentation, gas turbine and piston power plants.


  • Good leadership (individual contributor) presence:

    • Able to lead by example and live/work by company values. 
    • Ability to successfully contribute to a positive and productive work environment.
    • Able to instill a sense of urgency in team members. 
    • Able to be patient and objective in difficult situations with different types of people.



  • Good customer service tool box:

    • Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
    • Strong follow-through, quick thinking and resourceful.
    • Ability to remain calm, cool and collected in stressful situations.
    • Strong sense of urgency to address and solve important issues.

  • Good organizational, time management and prioritization skills:
    • Able to multi-task, maintain focus on several different projects at one time and hit deadlines. 
    • Able to be flexible with attention and priority.
    • Ability to work in a progressive, fast-paced environment (work well under pressure).

  • Good analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
  • Good communication skills (oral, written) with customers.  
    • Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.

  • Good interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization. 
  • Good project management skills, including the ability to take ownership for accomplishing assigned tasks.  Results-oriented planner who ensures that goals are met.  Able to set priorities and keep to projected schedules.
  • Computer Skills:  Comfortable and effective working in Microsoft Office, including Word, Excel, Outlook, and PowerPoint.

 
Education
 
  • Associate’s Degree (or Technical School equivalent) in Aircraft Maintenance or related field from an FAA accredited school   
  • A&P Certificate
  • Japanese Bilingual preferred

 
Experience
 
  • Three (3) plus years of aircraft mechanical experience preferred

 
Job Number: 1810089104
Job Location: Moses Lake, WA
Duration: 6 months
Input Date: 07/31/2018
Last Updated: 01/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mf2gAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr.

Description:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
• Responsible for all quality control inspections on aircraft/components in the Repair Station.
• Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
• Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting.
• Keeps accurate, neat and legible records of the work performed on aircraft/components.
• Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
• Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
• Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.
• Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status.
• Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
• Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example.
• Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures.
• Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft.
• May perform ODA functions as assigned.
• In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.

Other Requirements:
• Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
• Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required.
• Familiar with FAA certification approval processes.
• Strong written and verbal communication skills. Must be able to effectively prioritize tasks.
• Strong computer skills. Proficient with Microsoft Word.
• Minimum 20 WPM typing speed.

Education and Experience Requirements:
• High School graduate/GED. Airframe and Powerplant License required.
• Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.
 
Job Number: 24-288
Job Location: Long Beach, CA
Rate: $38 - $42
Per Diem: Yes
Overtime: Yes
Duration: 1yr +
Start Date: ASAP
Input Date: 09/17/2018
Last Updated: 10/26/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Assembly & Test Technician - Level 3

Description:
PDS Tech Inc. is seeking an Assembly & Test Technician, in Northford, CT.

Summary:
Must have experience in electronic repairs, troubleshooting printed circuit boards 
Low Voltage Knowledge 

Responsibilities of the Test Technician will include:
  • Adhere to Test Technician standardized work. Work from schematics, diagrams, work instructions, prints, and test specifications to test, evaluate, inspect and troubleshoot products.
  • Analysis of test failures and trouble-shooting of products to component level using multi-meters, oscilloscopes, various other diagnostic equipments. 

     

Required Skills and Knowledge: 

• Knowledge of schematics, diagrams, work instructions, prints, and test specifications to test, evaluate, inspect and troubleshoot products. 

• Understanding of electronic circuits to include amplifiers, comparators, switching power supplies, A/D converters, microprocessors, filters, and oscillators. 

• Understanding of safe practices for working with electrical circuits. 

• Familiarity with surface mount and through-hole electronic components. 

• Ability to troubleshoot analog and digital circuits to the component level. 

• Understanding and application of ICT and functional testing of subassemblies. 





Qualification: 

• Associates Degree in Electronics Engineering or equivalent 

• Must possess effective written and verbal communication skill. 

• Must adapt well to a changing environment.  

• Experience using variable power supplies, multi-meters, oscilloscopes, and PCs. 

• Experience troubleshooting electronic circuits. 
 
 
Job Number: 1810090928
Job Location: Northford, CT
Duration: 6 months
Input Date: 08/23/2018
Last Updated: 01/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Betsy Murphy
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002exuhAAA&URLSource=cjhunter

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 02/27/2017
Last Updated: 01/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

Avionics & Electrical Design Engineers

Description:
SolidWorks aircraft electrical and avionics upgrades

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 06/12/2018
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Electrical Systems Engineer

Description:
Avionics Electrical Systems Engineer assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.

Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/04/2018
Last Updated: 12/28/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Avionics Engineer

Description:
JOB SUMMARY:
Principal responsibilities include design and integration of aircraft avionics and electrical systems for modifications.
JOB RESPONSIBILITIES:
• Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD, Mentor Graphics and/or IAI HarnesSys)
• Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft
• Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents
• Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc.
• Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.
• Assist with the development, design, testing and certification documentation for new or modified printed circuit board modules for aircraft
EDUCATION/ EXPERIENCE:
• At least 2 years of related experience
• Bachelor’s Degree (or equivalent industry experience) in: Electrical Engineering, Computer Engineering or Electrical/Electronic Engineering Technology, or related technical degree.
• Electronic drafting experience with CATIA-CADAM Drafting (CCD), Mentor Graphics and/or IAI HarnesSys desired.
• C/C++ and assembly programming experience or coursework desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus.
• Experience with avionics and electrical system design to the requirements of CFR 14 Parts 23 & 25 is desired.
• Experience with 3D modeling and drafting using CATIA V5 file based/Enovia and/or CATIA V6/Enovia is beneficial.
 
Job Number: 87958
Job Location: multiple
Rate: open
Per Diem: possible
Overtime: possible
Duration: Long Term
Start Date: ASAP
Input Date: 07/25/2018
Last Updated: 01/17/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/ Electrical Engineering Design

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services. Successful candidate will work in a small team environment as part of one of our Avionics/ Electrical Engineering design teams.

Unique Skills:
• Tasks include preparation of wiring diagrams and system interface drawings for various entertainment, communication, and cabin systems.
• Excellent communication skills & ability to work with operations technicians on the shop floor is required.
• Must be familiar with electrical circuit design and interpreting electrical schematics and wire diagrams. AutoCAD experience required. SmarTeam experience preferred.
• Must have good basic 2D drafting skills.
• Strong written and verbal communication skills required.

Principle Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Performs other duties as assigned

Education and Experience Requirements:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
 
Job Number: 24-283
Job Location: Long Beach, CA
Rate: DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 08/23/2018
Last Updated: 10/26/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Design Engineer

Description:
Avionics/Electrical Design Engineer

Location: Long Beach, CA
Rate: $51.09 - $56.76/HR
Duration: Long Term W2 Contract
Shift: 1st Shift
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****
****Local candidates highly preferred. An In-Person interview will be required****

Required Skills:
Successful candidate will work in a small team environment as part of one of our Avionics/ Electrical Engineering design teams. Tasks include:
- Preparation of wiring diagrams and system interface drawings for various entertainment, communication, and cabin systems.
- Excellent communication skills and ability to work with operations technicians on the shop floor is required.
- Must be familiar with electrical circuit design and interpreting electrical schematics and wire diagrams.
- AutoCAD experience required.
- SmarTeam experience preferred.
- Must have good basic 2D drafting skills.
- Strong written and verbal communication skills required.

Education and Experience Requirements:
Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 9701
Job Location: Long Beach, CA
Rate: $51.09 - $56.76/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/23/2018
Last Updated: 10/31/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Engineers - Many Needed

Description:
• Experience creating engineering wiring diagrams for avionics and electrical systems using computer based drafting tools such as (Mentor Graphics, CATIA/CCD and/or IAI HarnesSys).
• Experience writing technical descriptions, requirements documents, test requirements, functional tests, and certification documentation including certification plans, ground and flight test plans and certification reports.
• Experience with 14 CFR Part 23 is desired.
• Experience with function hazard assessments and system safety assessments a plus.
• Experience using electronic test equipment for system troubleshooting or verification.
• A professional demeanor, excellent verbal and written communication skills required.

Email resume to: mmccarthy@pdstech.com
 
Job Number: Avio/Ele - Tex
Job Location: Wichita, KS
Rate: $65.00-$70.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 Months+
Start Date: ASAP
Input Date: 10/02/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist

Description:
CNC Machinist applies advanced skills in administration and use of procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. 2. Independently perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. 3. Set up and operate necessary test equipment in accordance with required documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. 4. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required maintenance data to ensure conformity requirements are met. 5. Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. 6. Demonstrate expertise and efficiency in repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. 7. Demonstrate expertise in use, maintenance, and calibration requirements of precision measuring and inspection tools such as, but not limited to, micrometers, calipers, bore gauges, multimeters, watt meters, spectrum analyzers, and borescopes. 8. Demonstrate expertise in the flow of materials and work order processes within the repair station. 9. Maintain and utilize all required paperwork in accordance with FAA Repair Station requirements. 10. Maintain a clean and orderly work area. 11. Comply with all company and legislative environmental health and safety regulations. Must be proficient in the setup and operation of 3-5 axis CNC Mills. Must be able to setup and operate conventional mills and lathes and use related precision measuring tools to inspect machined detail components to blueprints / 3D models.


CNC Machinist Lay-out, remove, fabricate and/or install major and minor repairs to flight controls and other secondary structure components using honeycomb core sandwich construction techniques, composite repair techniques, test bench procedures, hydraulic press procedures, and servicing carts. 2. Fabricate and repair sheet metal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. 3. Remove & install APUs and perform all required APU maintenance for all aircraft models 4. Perform repairs to electronic assemblies and subassemblies by removing and replacing circuit components, either through hole or surface mount, using acceptable soldering and circuit repair techniques. 5. Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. 6. Assist with training and instructing of other Acft Compo Repair I and II Techs. 7. Perform other duties as assigned.
HS diploma or GED. A&P license, FCC license, or NCATT cert preferred. Able to read/interpret blueprints, engrg docs and use/read precision measuring tools. Proficient in the operation of all tools & equip in the dept. Basic understanding of shop math. 4 yrs. experience in one of the following or other related expr: Sheetmetal, hydraulic overhaul, avionics/elect compo repair. Accredited schooling in electronics and elect sys may offset some experience reqmts. APU removal, install, service.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/04/2018
Last Updated: 12/28/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Component Product Engineer (Electric Propulsion) - WA - OM

Description:
Chipton-Ross is seeking a Component Product Engineer (Electric Propulsion) for an opening in Redmond, WA.

RESPONSIBILITIES:
60% - Lead technical activities on major programs. Perform tasks, delegate tasks and make decisions required to design, analyze, build and test electrical propulsion thrusters and thruster systems. Verify Aerojet Rocketdyne's products are in compliance with customer requirements. Demonstrate to our customers that Aerojet Rocketdyne is the best value supplier for their propulsion needs.
15% - Lead investigations or technical studies to closure rapidly and rigorously, applying appropriate resources and personnel in a cost-effective manner. Accumulate, prepare and present the documentation that is required to close an effort, including reports, Test Procedures and Work Instructions.
15% - Support proposal activities and manage internal research and development efforts as assigned.
10% - Active mentoring of less experienced personnel. Cultivate an existing knowledge base and build on it to serve as a resource to Aerojet Rocketyne and our customers for design, test and implementation of thrusters and propulsion systems.


REQUIRED EXPERIENCE:
Strong verbal, written, presentation and team-working skills a must. Proficiency in Microsoft Office products (Word, Excel, and PowerPoint) expected.

PREFERRED EXPERIENCE:
Priority will be given to candidates with demonstrated engineering leadership experience in a production environment developing and improving products and manufacturing processes.

EDUCATION:
Bachelor's degree in a related engineering discipline and 9 years of experience, preferably in electric propulsion, plasma devices or mission-critical technology. A Master's degree or higher in an Engineering discipline or Physics is preferred.

WORK HOURS:
9/80
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 174437
Job Location: Redmond, WA
Rate: $DOE
Duration: Direct
Input Date: 10/10/2018
Last Updated: 01/17/2019
Firm Name: CHIPTON ROSS
Attention: Lucas Medina
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmedina@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer - Level 2

Description:
Location: Dallas (Grand Prairie, TX)
Rate: $50.00/HR
Duration: 9 month contract
Shift: 1st Shift
Per Diem Split: Yes (if eligible)

****MUST BE ABLE TO OBTAIN A SECRET CLEARANCE****
****MUST BE A U.S. CITIZEN****

Description
- Seeking an Electrical, Electronic and Electro-mechanical (EEE) Components Engineer for a position in Grand Prairie, TX.
- The EEE Components Engineer should also have a working knowledge of component selection, screening, parts qualification and derating of Electrical, Electronic, and Electromechanical components used in military applications.
- The selected Candidate should be a self-starter, capable of handling several tasks at once.
- The selected candidate must be able to work without supervision.
- Candidate must be able to interface with Government customers (both in meetings and through presentation preparation), handle document issues relating to new component releases and qualification, handle component related failures, handle component noncompliance issues, handle program prohibited items such as pure-tin and able to handle counterfeit part detection.


Skill/Experience/Education
Mandatory:
- Must have or must be able to obtain a security clearance.
- Must be proficient with computer tools such as MS Excel and Access.
- Candidate should have experience in electrical component manufacturing process and physical property analysis.
- Parts Management - Working with designers to select components for use in designs.
- Obsolescence - Work with component lists and industry tools to evaluate part availability and determining path forward when issues are identified.
- This position requires periodic travel to both the customer and supplier locations.


Desired:
- The ideal candidate is a Material Science Engineer with electrical component experience or an Electrical Engineer with 5 years or more experience in Component Engineering.
- Experience in Components Engineering with broad knowledge of electronic components and devices.
- The ideal candidate has experience working electrical components on a Production Program.
- Experience in the disposition of Q-Notes.
- Experience with parts release process, and with formal Configuration Board support.
- Experience working with Global Supply Chain, Quality and Manufacturing groups.
 
Job Number: 9793
Job Location: Grand Prairie, TX
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 09/14/2018
Last Updated: 10/22/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cybersecurity / IA Architect

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Cybersecurity / IA Architect
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-7080

Join a dynamic group of software engineers responsible for the architectural design, development and cybersecurity of embedded software solutions for the world’s premier land-based combat vehicle producer.

Responsibilities:
• Work with project leads and customer to identify cybersecurity risks and vulnerabilities
• Lead a team of engineers in the assessment, documentation and categorization of risks
• Document existing cyber risks and vulnerabilities
• Actively participate as the point person in a cybersecurity working group
• Become fluent in the current software architecture and analyze it for points of cyber risk / vulnerability
• Audit existing embedded software and architecture against the RDAC risk matrix
• Work with systems software/hardware designers to create designs that are cyber resilient
• Work with outside cyber auditors to facilitate cyber assessment exercises
• Support systems level requirements allocation and testing
• Prepare and submit status reports to management and support design/code reviews
• Ensure all work conforms to software development process improvement and CMMI Level 5 initiatives
• Limited travel (training/seminars/meetings); 10% travel time

Qualifications:
• Required – able to obtain Secret clearance; active Secret clearance or higher preferred.
• Strong, proven domain expertise in Software Information Assurance / Cybersecurity
• Working knowledge of Department of Defense (DoD) Information Assurance Certification and Accreditation Process (DIACAP)
• Working knowledge of DODI8500.2 and AR25-2 and National Security Agency (NSA) Cross Domain Solutions (CDS) Secret and Below Interoperability (SABI) process.
• Working knowledge of National Security Agency (NSA) Risk Decision Authority Criteria (RDAC) methodology
• Software / Cyber / IA architecture background required
• Previous experience with military vehicle software preferred
• Excellent leadership, customer service, and writing skills required
• Security certifications preferred
• Experience with Secure Real Time Operating System technologies as well as Embedded Systems Development
• Occasional overtime, weekend, and off-hours
• Experience in using Microsoft software products (Word, Excel, PowerPoint, etc.)
• Experience in single board computer embedded microprocessor software design and development
• Experience with high level Programming Languages such as C and C++
• Experience with UML
• Familiar with Rational SW Development tools: DOORs, Rhapsody, ClearCase, ClearQuest
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelors of Science in Electrical Engineering, Software Engineering, Computer Science or related.
• Other technical degrees will be considered with related experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7080
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 10/10/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Theo Hawthorne
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Electrical Brackets & Installation

Description:
General Summary:
The Electrical Brackets & Installation Design Engineer is responsible for the development, planning and coordination of electrical brackets and installation designs.

Duties and Responsibilities:
1. Develops and maintains electrical brackets and installation designs.
2. Documents processes, specifications and procedures that support the design and manufacture of electrical commodities.
3. Develops statements of work, schedules and budgets.
4. Analyzes functional and physical input to assure development of complete integrated design architecture.
5. Provides specialized technical assistance to team members outside of the assigned group.
Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
6. Determines and develops own approach to solutions within schedule and cost objectives.
Actively works to improve daily processes and ensures all work meets customer requirements.
Maintains a current knowledge of developments in the field of specialty and/or other related
aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors' degree in Electrical Engineering, Computer Engineering or related field of study.
2. 8+ years of design engineering experience within aircraft structures is required.
3. Previous designing brackets for electrical harnesses and equipment installation is preferred.

Knowledge, Skills and Abilities:
1. Working knowledge of CATIA VS 3D solid modeling workbench or equivalent (i.e. - Solidworks, Unigraphics).
2. Familiarity with tolerance study (GD&T).
3. Proficiency in Microsoft Office Products (Word, Excel, PowerPoint) and Lotus Notes.
4. Ability to explain and present analysis and assumptions in a rational manner.
5. Ability to communicate effectively through all level throughout the organization.
6. Ability to work independently or within a team oriented environment.


The Structures Company is an AA/EOE.
 
Job Number: 222
Job Location: NC
Rate: $60.00 - DOE
Per Diem: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 10/25/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 4

Description:
Design and Analysis Engineer 4

Location: Mesa, AZ
Duration: 12 Months

Job Description:
Extensive and specialized knowledge and ability to design, analyze and validate electrical power systems including generation, storage, distribution, load management, conversion, stability, current return networks, high-voltage corona effects, power filter and fault mitigation, etc.

Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 622-Electrical Systems Design


Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 18-14747
Job Location: Mesa,, AZ
Per Diem: Available
Input Date: 09/06/2018
Last Updated: 10/01/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

Designer III

Description:

BASIC FUNCTION:
Conducts complex design assignments for the Engineering Department and functions as a technical specialist, formulating and developing advanced design concepts.
ESSENTIAL JOB DUTIES/RESPONSIBILITIES:
• Develops I&E Engineering Standards.
• Defines Projects by determining project objectives, selecting technical strategies and providing technical assistance to the business unit(s)
• Plans Projects by writing work scopes, developing schedules.
• Follow construction of Electrical / Instrumentation Projects (with Engineering approval)
• Implements Projects by monitoring performance, taking corrective actions, providing feedback to project.
• Solves technical problems related to projects and troubleshoots and updates report data for business unit(s)
• Ensures the maintenance and integrity of business unit(s) data
• Conducts research to support engineering in the development of electrical distribution and process controls
• Designs and plans layouts necessary for the installation of electrical and instrumentation as directed by engineering.
• Determines most effective arrangement of Electrical, Instrumentation & Controls; such as Burner Management, Safety Instrumented Systems, and Power Distribution Equipment
• Investigates and resolves work-in-process problems
• Special assignments or tasks assigned to the employee by their supervisor, as determined from time to time in their sole and complete discretion.
• Develop one line diagrams with emphasis on high voltage consistent with NFPA 70E (arc flash)
• Experience working with ETAP or similar programs for managing Arc Flash data.



EXPERIENCE:
A minimum of eight years of progressive work experience in electrical, instrumentation & controls is required. Emphasis on controls engineering and power distribution is required. With a minimum of 1 year developing medium and high voltage systems with record keeping consistent with arc flash.
PREFERRED EXPERIENCE:
Refinery or petrochemical industry experience is preferred.

EDUCATIONAL LEVEL:
A minimum of a Bachelor’s Degree in a technical discipline or equivalent amount of experience is required.
REQUIRED SKILLS:
Ability to manage a project is essential. Working knowledge of commonly used engineering concepts and ability to apply this knowledge analytically. Ability to stay abreast of new technology developments and processes is essential. Technical experience in medium and high voltage systems development. Ability to effectively communicate with others, both written and verbal communication. Advanced reading and writing skills, with the ability to perform complex mathematical calculations. Experience with the record keeping requirements of arc flash and the systems used to maintain the data.
PREFERRED SKILLS:
Working knowledge of Microsoft products and experience with engineering software is preferred.
The program we use to manage the requirements of NFPA 70E is ETAP, experience using this or similar programs used to manage arc flash analysis desired.


 
Job Number: 1810092390
Job Location: Tulsa, OK
Duration: 6 months
Input Date: 09/17/2018
Last Updated: 01/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f3DBAAY&URLSource=cjhunter

Digital Design Engineer

Description:
Job Description:


  • Client is seeking an individual with specialized skills in digital design tools with a firm background in computer operating systems and processes necessary to develop Client and unique digital circuit blocks and apply advanced algorithms in next generation silicon processes.

  • Primary job functions will include system administration, installation, and maintenance of an advanced circuit design environment consisting of commercial- and government- developed electronic design software.

  • Other duties may include supporting analog and RF design, developing standard cell libraries, and testing fabricated chipsets.

  • The selected candidate will represent our Client and DoD customers in outside discussions and technical forums.

  • This position will require some travel and require a security clearance.




Required Skills & Experience


  • A BS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required.

  • The applicant must be familiar with the Red Hat enterprise operating system or comparable Linux distributions, installation, maintenance, port security, backup, and shell scripting.

  • Familiarity with installation and maintenance of the advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is required.

  • The applicant must be capable of debugging and troubleshooting electronic design tool installation/maintenance and interaction with 3rd party tools and process design kits.

  • Experience in deriving verification test benches from detailed specifications is required.

  • Familiarity with at least one (1) commercial scripting programming language such as

  • PERL or Python is required.




Desired Skills and Experience

Additional experience in digital circuit design is desired, including: Verilog/VHDL behavioral modeling, Digital IC design for manufacturing (JTAG insertion, test vector generation, Built-In Self-Test), an understanding of physical design issues including layout, familiarity with memory compilers, Cadence Skill code development, and fundamentals of Process Design Kits (PDKs).



Special Requirements/ Certifications:

Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs
 
Job Number: 18-12267
Job Location: Dayton, OH
Rate: 0.0USD/Hour
Per Diem: SPLIT
Overtime: Possible
Duration: 2018-08-10 00:00:00.0
Start Date: 2018-05-13 00:00:00.0
Input Date: 03/27/2018
Last Updated: 01/17/2019
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drawing Checker

Description:
Our client in Florida is looking for a seasoned Drawing Checker to work in Oklahoma. Submit your resume if you meet the qualifications!

The ideal candidate for this position will perform the following tasks:
* Checking mechanical and electrical design drawings and models for compliance to established standards, at predetermined levels of depth, as well as the development and maintenance of 3D models and detailed drawings. Applications include cockpits and instruments for flight simulators, maritime trainers and other platforms.

Mandatory Qualifications and Experience:
* Minimum of 4 years as Document / Drawing Checker
* Minimum of 6 years experience developing 3D models and detailed drawings
* Minimum of 4 years recent experience using SolidWorks and AutoCAD
* Ability to work in a collaborative environment to develop innovative solutions
* Working knowledge of ASME drafting standards including Geometric Dimensioning and Tolerancing (GD&T) Example: Y14.100, Y14.24, etc.
* Minimum of 4 years experience with GD&T
* Assist with program deliverables: Design, Modeling and Drafting
* Must be a US citizen
* Ability to obtain a security clearance; must have active secret clearance walking in the door

Desired Qualifications and Experience:
* Design/drawing checking experience
* Associates Degree in Engineering or equivalent training
* Advanced SolidWorks training
* Experience using SolidWorks Enterprise Product Data Management (EPDM)
* Familiarity with aircraft cockpit systems and maritime platforms
* Existing security clearance

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 128777
Job Location: Broken Arrow, OK
Duration: 6 mos
Start Date: ASAP
Input Date: 10/11/2018
Last Updated: 10/30/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EDD / Electrical Engineer - Clearance

Description:
' ' 'Senior Electrical Engineer - Antenna and Radar Theory and Design
We have an opportunity for an electrical engineer who is seeking to utilize his/her strong academic background and experience in antenna and radar system theory and design, including architectures and RF/Microwave components, subsystems and Active Electronically Steered Antennas (AESA). The successful candidate will employ their working knowledge of electromagnetic theory and radar systems, and their analytical skills in radar, antenna, and microwave systems. Responsibilities will include hands-on testing of microwave components and antennas. Provide technical support for proposal activities. Team leadership skills including cost and schedule management experience are desired.

Required Skills and Education:
•Bachelor's Degree in Electrical Engineering plus minimum of 4 years direct experience OR
•MS degree in Electrical Engineering plus minimum of 2 years experience OR PhD

Experience should be in the following:
•Antenna or radar analysis and hardware design and test
•Hands-on experience with electromagnetic simulation tools such as HFSS, ADS, CST and analytical tools such as MatLab.

Desired Skills:
•Candidates should have a propensity for learning through self-study, and be comfortable in a multi-tasking environment.
•Excellent written and oral communication skills
•Strong academic background that includes courses in: Microwave Engineering, Electromagnetic Theory, Antenna Theory, and Radar Systems
•Hands on experience with antenna testing techniques, including near field range, far field range or compact range testing
•Strong measurement capability, including Vector Network Analyzers, and antenna measurements
•Experience in technical writing, proposal writing, and oral presentations
•Experience in cost estimating, budget and schedule management
•Experience leading technical teams in antenna, RF/microwave, or radar developments
•Existing Secret clearance or ability to obtain a secret clearance with interim clearance prior to start date
 
Job Number: 9
Job Location: Tewksbury, MA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Start Date: ASAP
Input Date: 10/10/2018
Firm Name: INTELLISWIFT SOFTWARE INC
Attention: Sandeep Kumar
Address: 39600 BALENTINE DR STE 200
City, State: NEWARK, CA 94560
Phone: 510/370-2600
Website: www.intelliswift.com

EHI Engineers

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, system, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
 
Job Location: Savannah, GA
Input Date: 07/07/2014
Firm Name: INCONEN CORPORATION
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: cathy@inconen.com
Website: www.inconen.com

ELECTRONICS DESIGN ENGINEER

Description:
JSG is seeking an Electronics Design Engineer for our Aerospace Client in Glendale, CA.
LOCAL CANDIDATES ONLY - Direct Hire

Work as part of a world-class, multi-disciplinary team to develop ruggedized electronic products incorporating embedded microprocessors, and transition them into production for aerospace, military, sub-sea, and other harsh-environment applications.

Job Description:

Work from Marketing Requirements to develop electronic hardware designs incorporating embedded microprocessors responsive to the requirements, including
Product design architecture
parts and vendor selection
detailed hardware design and schematic generation and capture in PADS
preliminary parts layout for fit checks
work with PCB layout design team and PCBA vendors
work with mechanical design team
develop firmware/scripts/applications to test hardware
Debug and troubleshoot new designs
Execute functional verification of electrical subsystems
Support manufacturing for all designs including microprocessors, including
Work with Test Engineering to develop appropriate acceptance test stations in production
Troubleshoot problems in production and at customer sites
Work with Product Marketing and Business Development to prepare responses to customer Requests for Proposals
Customer specification review
Preliminary design concepts
Estimate engineering effort to execute designs and firmware/software
Preliminary bill of materials and costing
Basic Qualifications

Bachelor’s degree in Electrical Engineering, Computer Science, related filed or equivalent experience
10+ years overall experience in hardware design
High level of expertise in embedded microprocessor design and programming (C/C++, etc.)
Experience with Ethernet product design (10/100/1000BASE-T interfaces, PHYs, unmanaged switches.) 10GBASE-T interface experience a plus.
Skilled in the design and use of common I/O protocols (I2C, USB, JTAG, Ethernet).
High level of experience with hands-on troubleshooting and turn-on of new circuitry, including test bench equipment such as multi meters, DAQs, spectrum analyzers, JTAG and ICE probes, software, oscilloscopes, etc.
Experience in qualifying embedded systems to MIL-STD-810 MIL-STD-461 or IEC equivalents
Experience in failure analysis and troubleshooting skills in a production and R&D environment
Experience with prototyping solutions and bench testing methodology
Experience with test automation with background in scripting
Excellent technical writing skills and experience writing hardware, software, and interface requirements along with qualification test plans and procedures.
Able to handle ITAR data. Must be US Person or have Green Card.

Preferred Qualifications

Experience with military systems with battery charging, embedded protocol transceivers, microprocessor and FPGA-based systems
Experience with Ethernet product design and testing (Ethernet switch ICs, fiber-optic media converters, etc.)
Experience with digital video systems testing
HD-SDI, 3G-SDI, HDMI, DVI, DisplayPort
 
Job Number: 368920
Job Location: Glendale, CA.
Per Diem: No
Overtime: possible
Duration: Direct
Start Date: ASAP
Input Date: 10/03/2018
Last Updated: 01/17/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

EPS Engineer

Description:

The Engineer shall work and coordinate design, development and tests for electrical systems and components. This includes interfacing with all other aircraft functions and engineering teams to coordinate and obtain approval of any task assigned contributing to the aircraft and Electrical Power System development and Certification.

Scope of Work:



(1) will work as a team member of Electrical Power System Team, Electrical Power and Lighting System Design Group.



(2) Basic work scope is to develop and finalize the designs of electrical power switching equipment, power distribution equipment, and power conversion equipment such as inverters in order to structure Electrical Power Systems.



(3) This scope of activity involves:



(a) Evaluating the current aircraft design, with respect to compliance to the Electrical Power System related airworthiness regulations of JCAB, FAA and EASA,



(b) Coordinating integration of design change activities originated from Electrical Power Supply System or when requested by a system that interfaces with the electrical power system.



(c) Presenting and discussing the Electrical Power Supply System compliance with the Certification Authorities.



(d) Leading verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.



(4) All tasks required to perform above activities is considered within work scope; initiating/ reviewing related documents, technical calculation, interface discussion with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners/suppliers.



(5) Coach and mentor members about professional knowledge on the Electrical Power System.



(6) Manage/discuss the technical contract requirements with applicable Electrical Power System suppliers and other interfacing suppliers as appropriate.



(7) Provide expertise to assist in resolving the Electrical Power System performance during any rig testing or Flight testing.


Requirements
More than 10 years of experience in aerospace EPS
Good English verbal, writing skills
Motivated to work in Japan
 
 
Job Number: 1810086448
Job Location: Nagoya,
Duration: 24 months
Input Date: 07/18/2018
Last Updated: 01/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mTnNAAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS Engineer

Description:
Role Description


This position is for an engineer that will perform EWIS design and integration tasks associated with the Electrical Systems used on Engineering Flight Simulator (EFS) and its simulation host equipment. The aircraft simulator is a static SIM with a representative cockpit environment, avionics & flight controls integrated systems, visual system and simulation host computers running the performance and aero models from an Aircraft. This position is located in Moses Lake, WA.



Job Duties and Responsibilities

Perform as a technical authority in Electrical Wiring Interconnect System (EWIS) design applied to an Engineering Flight Simulator (EFS);
Modify, Rework and Fabricate wire harness assemblies for EFS.
Assist as the cognizant engineer responsible for all aspects of an EWIS design;
Modify and maintain wiring diagrams, installation drawings, cable/wire assembly drawings, harness fabrication drawings by translating from aircraft electrical system schematics;
Select qualified electrical components such as Connectors, Backshells, shield coverage, strain reliefs, over-braid, and other parts.
Provide on-site engineering support and coordinate integration of EFS design change activities originated from EWIS requirements;
Investigate EWIS component/assembly failures and assist in resolving EWIS issues during any EFS testing;
Generate reports detailing the aircraft EWIS design/modifications/testing;
Complete special projects and tasks assigned by Group Lead.


Requirements
Knowledge/Skills/Abilities

Familiarity with industry specifications and standards associated with EWIS, including but not limited to electrical design for different aircraft systems, wiring diagram requirement definition, ESSDs, electrical assemblies and overall system development methodologies.
Experience with translating from existing aircraft system schematics and wiring diagrams;
Familiar with selection of components used in aerospace wire harness construction and installation;
Experience using dedicated tooling associated with wire harness manufacturing/assembly;
Capable of resolving technical issues relating to EWIS.
Experience with ENOVIA / CATIA V5/V6 Wiring Workbench or VISIO is preferred.
Proficient at prototyping new designs and performing rework.
Experience with surface mount components is preferred.
Represent Electrical Group in packaging meetings related to wiring harnesses;
Excellent oral and written communication skills;
Fluency with MS Office/SharePoint applications.
Education

Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Other Engineering fields may be considered.
Experience

Aerospace Experience is required (5-7 years preferred) in aircraft Electrical Wiring Interconnect System (EWIS) design
 
Job Location: Moses Lake, WA
Input Date: 07/24/2018
Last Updated: 10/02/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

EWIS Expert

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for EWIS Expert for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

As a global engineering expert in aircraft Electrical Wiring Interconnection Systems, you will coordinate with contracted suppliers, interface with all other aircraft functions and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft System development and Certification;
 
Scope of Work:
         Work as Global engineering expert as part of the EWIS team
         Basic work scope is to participate in the development and finalization of the aircraft T/C design, compliant to all applicable requirements.
         This activity includes:



  • Evaluating the current aircraft design, with respect to compliance to the EWIS related airworthiness regulations of JCAB, FAA and EASA,
  • Coordinate activities related to defining the ESSDs required to generate wiring diagrams
  • Support verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.
  • Coordinating integration of design change activities originated from EWIS requirements when required, run unit base and manage aircraft level changes for EWIS group
  • Responsible for tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, technical calculation, interface discussions with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
  • Coaching and Education of company members about professional knowledge in the EWIS domain.
  • Interface with other suppliers as appropriate.
  • Provide technical expertise and assist in resolving the EWIS issues during any rig testing or flight testing.
     


 



 
Job Number: 1710075244
Job Location: Nagoya,
Duration: 12 months
Input Date: 03/16/2018
Last Updated: 01/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023L1VAAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
DUTIES
Responsible for coordination of all technical activities on assigned projects, as it pertains to IFE/Electrical or Actuation systems. Plans, schedules, conducts, and coordinates assigned electrical engineering work; monitors work for compliance to applicable Airframe requirements, IFE supplier requirements, customer requirements, accepted engineering practices.

EDUCATION/EXPERIENCE
Bachelor�s Degree required in a relevant Engineering field with 2-5 year�s related experience and/or training; or equivalent combination of education and experience.

TECHNICAL SKILLS
� Experience in the design and certification of Electrical Components installed in Aircraft interiors is desired.
� Knowledge about aircraft documentation systems for after sales (CMM, SB) and aircraft configuration control systems is desired.

COMPUTER SKILLS
� Minimum of 5 years� of experience in CATIA V5 is required.
 
Job Number: 16-576
Job Location: TX
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/27/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Systems Design & Analysis Engineer IV & V - (OK)

Description:
Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in electrical engineering.

Qualification:
─ Electrical Power System >8 years (Required)

Experience:
─ Ability to develop work packages and design concept from statement of work and system requirements.
─ One line, three line AC & DC power architecture and power distributions.
─ Power system load flows, AC 1ph/3ph, and DC load analysis.
─ Equipment proper breaker sizing and wire sizing/voltage drop analysis.

Knowledge:
─ Electrical equipment such as integrate drive generator, auxiliary power unit, generator control unit, current transformer, generator breaker/relays, frequency 400Hz/60Hz converter, voltage AC/DC converters, and other protective devices.
─ Mil-Std-704; DO-160 power quality and FAR 25 FAA Generating Power System.
─ Hand-on test equipment is preferred.
─ Capability to provide leadership, guidance to less experienced engineer team members.
 
Job Number: EEok
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 09/06/2018
Last Updated: 11/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Electrical Applications Engineers

Description:
Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. Mentor L-Cable
 
Job Location: Savannah, GA
Input Date: 07/07/2014
Firm Name: INCONEN CORPORATION
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: cathy@inconen.com
Website: www.inconen.com

Electrical Building Designer -- Mid-Level

Description:

 
Job Location: Braintree, MA
Input Date: 06/12/2018
Firm Name: NESC STAFFING
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
800 Phone: 800/562-3463
Email: lokeefe@nesc.com
Website: www.nesc.com

Electrical Design & Analysis Engineer

Description:
High-speed ADCs/DACs - top secret clearance

New Satellite Development Program
Direct Hire or Contract
High Compensation
Top Pay in Industry
Direct Hire Sign-on Bonuses up to $25K
Comprehensive Benefit Package
Direct Hire Relocation


Paperless hiring
Paperless weekly pay
Direct deposit
Holiday & longevity pay
Customizable benefits
Identity theft protection
401K immediate enrollment
 
Job Location: El Segundo, CA
Input Date: 08/06/2018
Firm Name: PDS TECHNICAL SERVICES
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Email: alieberman@pdstech.com
Website: www.pdstech.com

Electrical Design Engineer 4

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Unique Skills:
•AutoCAD required, Catia V5and CHS preferred
•Experience with power distribution, lighting, switching, sizing and routing.
•Familiarity in mechanical system design
•Familiarity with aircraft STC procedures preferred. 9GV,GVI, and GVII electrical system design experience preferred.
•14 CFR 25 Subpart H - EWIS experience preferred
•Part 25 Certification Experience for Cabin Interiors preferred
•Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
•Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
•Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
•Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
•Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
•Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
•Is consulted extensively by associates and others as a recognized authority within the field
•Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
•Approach to problem solving balances technical product, cost and schedule
•Works without appreciable direction; work is reviewed from a long-range perspective for desired results
•Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-288
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 01/03/2019
Last Updated: 01/14/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1) AutoCad required, Catia V5and CHS preferred
2) GV,GVI, and GVII electrical system design experience preferred.
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design
8) Familiarity with aircraft STC procedures preferred.
9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 9857
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/24/2018
Last Updated: 01/11/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Design Engineer

Description:
Are you looking for an exciting career opportunity as an Electrical Design Engineer?  Please reach out to Pam at:  pzack@pdstech.com or call her at 480.212.0849

Description:  
Analog Design Engineer
 
Experienced Electronics Engineer to provide technical expertise and project planning support to develop new product lines and to support existing group product lines with design engineering related functions.
 
This position requires experience interacting with customers and working in a team environment. 
 
Key Responsibilities:



  • Provide Analog Design and Analysis expertise utilizing Cadence Simulation tools. 
  • Provide leadership in and conduct activities associated with new product development as it pertains to design, documentation, engineering analysis, product design, drawing preparation, and Design Reviews as well as support of business development (marketing) activities.  
  • Provide leadership in and conduct activities associated with support of existing product manufacturing efforts as it pertains to design, documentation, and general support of inspection processes, manufacturing processes and test processes and cost reduction activities to include engineering analysis, product design, drawing preparation, cost estimation, and product planning.  
  • Provide technical support and guidance (mentoring) to junior engineers, to include review and critique of design documentation, development plans, test plans, and test results. 
  • Provide leadership of failure investigation activities through application of rigorous root cause analysis. 
  • Provide project design support of Internal Research and Development (IRAD) activities, as well as providing engineering leadership and conducting design engineering tasks related to those activities. 
  • Assist in design and development of manufacturing tooling and test equipment. 
  • Prepare reports and presentations related to design and development activities, including technical proposal submittals, test plans and reports. 
  • Support kaizen-related process improvement activities.

 
Qualifications:

  • Bachelor of Science Degree in Electronics Engineering; Advanced degree a plus. 
  • Minimum of five years of experience in design-related engineering position. 
  • Experience developing and integrating electronic assemblies into product designs preferred.  This includes leveraging the entire value chain from supplier through final factory manufacturing operations. 
  • Experience with EMI/EMC compliance. 
  • Experience with DOE, FMEA, PFMEA, Six sigma or similar analysis tools. 
  • Experience with government specifications and industry standards related to safety critical electronics a plus. 
  • Advanced skill level in Microsoft Office (Word, Excel, Access, and PowerPoint). 
  • Intermediate skill level in Microsoft Project and Visio preferred. 
  • Advanced skill level in Analog Simulation, preferably with Cadence PSPICE. 
  • Strong Analog background with High Power, High Voltage experience a plus. 
  • Experience performing Stress Analysis and Thermal Analysis.
  • Demonstrated ability to apply mathematics, science, and technology in product design and complex problem solving 
  • Superior written and oral communication skills.

 
 This is a Direct Hire position with opportunity for growth! 




 
Qualifications:  
  • Bachelor’s Degree- Mechanical, Aerospace or Electrical Mechanical.  Advanced degree a plus
  • 5 years’ experience in design; preferably in related field.
  • Design experience- plan to production is a must. 
  • 2 years participation in cross functional team while developing products is preferred.
  • Presentation skills are required. 

 
Job Number: 1810089190
Job Location: Hollister, CA
Duration: 0 months
Input Date: 08/01/2018
Last Updated: 01/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mfR8AAI&URLSource=cjhunter

Electrical Design and Analysis Engineer 4 at Huntington Beach, CA

Description:
Design and Analysis Engineer 4

Location: Huntington Beach, CA
Duration: 6+ months

Description:
Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for Automatic Test Equipment (ATE). Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

Required Skills:
Knowledge of ATE design to meet unit under test (UUT) electrical, interface, and communication protocol requirements. Experience with ATE Engineering, knowledge of test instruments device driver wrappers and self-test software development.

Preferred Additional Skills:
Experience in software development using C, C++, C# and/or ATLAS. Experience in software development using LabWindows/CVI. Knowledge of the following aircraft communication protocols: 1553, ARINC 429, RS-232, RS-422, and Ethernet.

Education / Experience:
Bachelor's and 9 or more years' experience, master’s with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code:
664-Electronic Sys Design & Analy
 
Job Location: Huntington Beach, CA
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 09/13/2018
Last Updated: 01/17/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: mzoheb@iconma.com
Website: iconma.com

Electrical EWIS Engineer

Description:
Electrical EWIS Engineer Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative 

Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required





Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job. 
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/04/2018
Last Updated: 01/11/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
• Experience developing electrical subsystem architectures
• Experience with developing requirements for electrical power generation, conversion, and distribution hardware.
• Experience with either Capital, Mentor Graphics, or Harness design tool.
• Experience performing electrical loads analysis.
• Experience generating System Checkout Procedures and providing support during design verification tasks.
• Experience incorporating subsystem hardware into a System Integration Lab (SIL) and troubleshooting Integration issues.
• Experience trouble shooting electrical systems.
• Experience with overseeing hardware suppliers
• Good oral and written communication skills.


The Structures Company is an AA/EOE.
 
Job Number: 246
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: 10-12 Months
Start Date: November
Input Date: 10/24/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
The role will support the entire design life cycle from project planning efforts to entry into service and production transition support. Requirements definition using DOORS, detailed design, validation of requirements and verification of implementation. Also includes managing Problem reports for hardware that has already been delivered.
The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and works well in a team environment. As a Staff Electrical Engineer, this role will lead and mentor other electrical engineers throughout the entire design life cycle and support project planning efforts and ensure execution to schedule and budget.
Education
BS degree in Electrical engineering, with 6+ years of experience, a Master's degree preferred.
Basic Qualifications
• Design responsibilities include architecture, development and analysis of: high speed digital systems comprised of microprocessors, microcontrollers, DSPs, FPGAs and high speed communication links.

• Create documentation including hardware design plans, technical requirements, functional specifications, design specifications, qualification test plans and reports.

• Support current production designs including quality improvements, cost reduction, component obsolescence and failure analysis.

• Evaluate and approve electronic components to meet requirements for availability, performance and cost.

• Support project planning efforts and ensure execution to schedule and budget.

• Evaluate failures to determine root cause and corrective actions.

• Interface and support validation, verification and manufacturing engineers and technicians with product and manufacturing testing.

• Apply knowledge of DOE, FMEA, tolerance analysis, simulation and statistical methods to improve robustness and quality of electronic designs.

Basic Qualifications
• It is desirable that the candidate has experience with the activities listed below for Highly Complex COTS components operating in the GHz bus frequency range.
a. Digest vendor SOC documentation (data sheets, user manuals, app notes, errata, …) to develop constraints and requirements for H/W implementation
b. Effectively work with the software team to develop configuration register settings
c. Perform shared resource analysis
d. Perform configuration settings and failure analysis e. Knowledge of accommodation/mitigation techniques for undocumented features, vendor micro code, configuration fault anomalies
e. Perform programmable logic requirements definition
f. Knowledge on component selection and trade studies
g. Capable of programming code on development boards for design and initial board functional checkout
h. Perform power sequencing analysis Experience with the full DO-254 aerospace hardware development and certification lifecycle including: electrical architecture design, requirements analysis & development, electrical design, development & integration, and qualification testing (DO-160, MIL-STD-461, MIL-STD-810).
 
Job Number: 259
Job Location: Phoenix, AZ
Rate: $69.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: 10/22/2018
Input Date: 10/09/2018
Firm Name: UNIVERSAL STAFFING SERVICES
Attention: Nancy Boyce
Address: 628 HEBRON AVE
City, State: GLASTONBURY, CT 06033
Phone: 860/527-8135
Website: www.ussjobs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Clearance required prior to start - Interim Secret Final Clearance Required - Secret

Technical experience in avionic systems, flight termination systems, flight telemetry systems, instrumentation or computer-based ground support equipment.

Responsible for supporting the design and overall system development of the operational (tactical) electrical subsystems for the PDV and the booster. Knowledge of flight avionics is desired. Engineer will also be responsible for support of systems engineering (compatibility analysis, FFMEA generation, specification development).

Experience and working knowledge/background of Missiles, Re-entry Vehicles or spacecraft. Technical experience in avionic systems, flight termination systems, flight telemetry systems, instrumentation or computer-based ground support equipment.
 
Job Number: 100
Job Location: AL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 10/02/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Electrical Engineer

Description:
Electrical Engineer reports to the Engineering Supervisor, the Electrical Engineer will be responsible for the planning, design and oversight of the installation, operation and maintenance of electrical components, equipment and systems.  They will perform standard engineering assignments usually representing a significant portion of a larger project and will select engineering techniques to solve problems and make design recommendations.





Electrical Engineer participates as a team member in a specific phase of a broad engineering assignment.
Directs preparation of appropriate documentation for assigned projects.
Provides technical leadership to a small group of temporarily assigned engineers and technicians.
Ensures successful completion of the assigned project phase within the budgeted time and cost constraints.
Participates in defining engineering approaches, and in planning and scheduling work.
Cover the capacity gaps in documentation for delivery milestones.






Bachelor’s Degree from a four-year college or university and a minimum of five (5) years’ experience 




Aircraft electrical design experience
Experience with Catia
 
Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/02/2018
Last Updated: 01/11/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

Electrical Engineer

Description:
PDS TECH INC. is seeking  Electrical Engineer in Tewksbury, MA
 
The primary responsibilities will be the development and implementation of test capabilities leveraging a strong working knowledge of test equipment hardware and software technologies. This is an excellent position for a test equipment engineer who has a background in digital test, analog test, RF test, or power supply test and a desire to apply those skills to combined hardware/software test solutions.You will be joining a diverse project team for the design and development of test equipment and test solutions for testing radar, sonar, communication, missile, combat control systems, subsystems and components for various programs within IDS. These products can contain Analog, RF, Microwave, Acoustic, High Power, and Digital Electronic technology and can also have Software (embedded, firmware, Signal Processing, VHDL, etc.). Test Development Engineers are involved from the beginning of product design as a concurrent engineering effort, continuing into supporting engineering design verification testing, production test and final system level verification and sell-off; includes in-plant or field testing. Typical test solutions include simulation, stimulation and data acquisition capability to provide stimulus and response test environments for verifying functional performance. Typical test systems encompass Hardware In the Loop Stimulators, Custom Automatic Test Equipment, Commercial Automatic Test Equipment, High Power, Mixed-Signal, Digital and Environmental Stress Screening systems, mechanical holding fixtures, adapters, and interface cabling and harnessing. .

Basic Qualifications: B.S. in Electrical Engineering or Computer Engineering or B.S. in Electronic Engineering Technology8+ years’ experience in engineering design and development environment with 4+ years direct exposure to Test Equipment  Design and Development tasks U.S. Citizenship is required Desired Qualifications: Digital, and/or Analog, and/or RF, and/or power supply test hardware design experienceUse of Commercial Test and Measurement EquipmentVXI/VME/MXI/PXI/CompactPCI Application DevelopmentCMMI and 6 Sigma ExperienceStrong interpersonal and communication skillsGood decision-making and problem-solving skillsExperience with VHDL a plusSoftware applications / programming skills a plusAbility to obtain a security clearanceKeywords: Test Equipment Design and Development, Digital, Analog, RF, power supply test, hardware design, clearance 
 
 
Job Number: 1810089990
Job Location: Tewksbury, MA
Duration: 12 months
Input Date: 09/04/2018
Last Updated: 01/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Michael Accunzo
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002miceAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer reports to the Engineering Supervisor, the Electrical Engineer will be responsible for the planning, design and oversight of the installation, operation and maintenance of electrical components, equipment and systems.  They will perform standard engineering assignments usually representing a significant portion of a larger project and will select engineering techniques to solve problems and make design recommendations.





Electrical Engineer participates as a team member in a specific phase of a broad engineering assignment.
Directs preparation of appropriate documentation for assigned projects.
Provides technical leadership to a small group of temporarily assigned engineers and technicians.
Ensures successful completion of the assigned project phase within the budgeted time and cost constraints.
Participates in defining engineering approaches, and in planning and scheduling work.
Cover the capacity gaps in documentation for delivery milestones.






Bachelor’s Degree from a four-year college or university and a minimum of five (5) years’ experience 




Aircraft electrical design experience
Experience with Catia
 
Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/03/2018
Last Updated: 10/12/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Palmdale, CA
Rate: $61.16/HR
Duration: 1 year contract
Shift: 9/80-A
Per Diem Split: Yes (if eligible)
Overtime: Possible

****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
- Researches, develops, designs, and tests electrical components, equipment, systems, and networks.
- Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
- The applicant will be focused on the electrical wiring and harness assembly diagram design and development.
- Duties include creating wiring diagrams and harness assembly diagrams, resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised C-5 manufacturing wiring documents (Wire Routing Documents (WRDs), Termination Aids (TAs) and Wire Harness Master (WHM) sketches).
- Candidate will be part of a team effort to develop C-5 wiring from design to installation, to include liaisoning between C-5 Avionics Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance to Company Specifications.
- Engineer is required to support air vehicle electrical harness component and installation design and fabrication.
- Associated tasks include the development of air vehicle electrical drawings and drawing revisions, and coordination with production operation personnel support of air vehicle assembly (aircraft shop support).

An ideal candidate will possess experience in the following:
- Working knowledge of CATIA and the CATIA Harness function
- Familiarity with electrical and electrical schematics (CAPITAL, connectors, back-shells, aircraft wire types)
- Mechanical knowledge of aircraft hardware (aircraft structure, miscellaneous small parts)
- General drawing and drawing revision practices


Education:
- BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10005
Job Location: Palmdale, CA
Rate: $61.16/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 10/23/2018
Last Updated: 10/26/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Responsibilities:

> Identify customer requirements
> Design electrical systems / products and develop/generate electrical schematics, design specifications & technical drawings
> Specify components, wire and connector sizing, and interfaces; validate schematics and circuit diagrams
> Process electrical Engineering Change Proposals (ECPs)
> Create Bill of Materials (BOM); research suitable solutions while estimating costs & schedule
> Create models and/or prototypes of products
> Work with others on design, product management & production teams, as well as with clients and contractors
> Design test plans and conduct tests; record, analyze, and interpret test data
> Propose modifications and retesting products as required for product compliance to specifications
> Qualify the final product and/or system while adhering to Quality Management processes and policies
> Prepare product documentation, write reports, and give presentations for design and other engineering reviews
> Resolve process problems, provide recommendations to improve processes & monitor products to improve on future design; service and maintain equipment as necessary
> Work within the National Electrical Code to ensure safety and compliance

Requirements:

> 5+ years of engineering experience with a Bachelor’s degree in Electrical Engineering or equivalent
> Strong electrical experience in AC/DC and with generators, chargers, battery systems, etc.
> Experience in electro-mechanical system design & networking systems (wireless, Ethernet, serial communications, etc.)
> Experience with soldering, crimping, MIL spec connectors and harness design
> Proficiency with Microsoft Office to include Excel, Word, PowerPoint, and Project
> Experience with general office software tools; ability to utilize the Internet for research and resource gathering; ability to manage communications and calendars through email.

Preferred:

> Experience in designing electrical components, assemblies, and subassemblies
> Servo Motor Design and Control
> PLC design experience is a plus
> 2D and 3D drawing experience (SolidWorks Routing a plus)
> Experience with IPC & MIL standards for government customers
 
Job Number: 041_2018
Job Location: Baltimore, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes / Possible
Duration: 6 - 12+ Months
Start Date: ASAP
Input Date: 07/25/2018
Last Updated: 10/16/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Clearance

Description:
Job Description:

The selected candidate will provide Electrical Engineering support as a member of a multi-disciplined team composed of various engineering disciplines (Electrical, Software, Mechanical, Firmware/Configurable Logic, etc). The team will be responsible for performing design, development and integration of RMS test products within the Test Systems Solution Center (TSSC).

The candidate will be responsible for any one or all of the following for a given test system:

•Assisting in defining and documenting test requirements.
•Defining system architecture (block diagrams, design concepts, etc).
•Developing detailed designs and drawings (including interconnects, cables, circuit card assemblies, rack mounted electrical enclosures, etc).
•Trade-studies and selection of commercial off the shelf (COTS) components and equipment.
•Working with drafters to document and release drawings.
•Supporting design reviews with customers and management at various phases of the design process.
•Providing oversight to technicians during hardware assembly and installation
•Testing/verification of completed designs.
•Design, development, integrate, test, and/or maintain test application software for TSSC.
Other tasks may include updating or adding to existing Test Systems, or providing support to maintain operation of existing Test Systems (diagnosing failures, updates based on improved technology or requirements changes, etc). All efforts by the candidate will be performed while managing the technical, budget, and schedule considerations for their assigned projects. The qualified candidate will also be expected to conform to a process driven environment following procedures and practices established to guide an engineer through the different phases of test equipment implementation including design, fabrication, documentation, and support.

Required Skills:

•Requires a Bachelor of Science degree in Science, Technology, Engineering or Mathematics (STEM)
•This position requires the eligibility to obtain a security clearance. Except in rare circumstances, only U.S. citizens are eligible for a security clearance.
•A minimum of 2 years professional electrical engineering design experience is required; must have experience with circuit design, analysis, test.
•Must have experience with developing and implementing programming languages.
•Must be familiar with common electrical engineering tools for schematic capture and simulation (e.g. Orcad, PSpice, Mentor Graphics, Workbench, Multisim, Altium).
•Must have experience utilizing integrated development environments and debugging tools to troubleshoot software.
•Must have experience with troubleshooting and root-cause analysis.
•Must have experience with commonly used test equipment (Oscilloscopes, DMMs, Network Analyzers, Power Meters, etc).
•Must have experience performing analog, digital, and/or RF design.
 
Job Number: 2
Job Location: Tucson, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 months+
Start Date: ASAP
Input Date: 10/10/2018
Firm Name: INTELLISWIFT SOFTWARE INC
Attention: Sandeep Kumar
Address: 39600 BALENTINE DR STE 200
City, State: NEWARK, CA 94560
Phone: 510/370-2600
Website: www.intelliswift.com

Electrical Engineer - Clearance

Description:
PDS Tech is seeking an Electrical Engineer in Tewksbury, MA

The RESP Department is the focal point for receiver, exciter, beam steering, and signal processing technology and is responsible for the design, development, integration, support to production builds, and lifecycle support of IDS products. Hardware Engineers in this position will be responsible for providing design engineering support to the procurement, build, test, integration, and sustainment of IDS products with an emphasis on Radar receiver and exciter subsystems. The technical tasks associated with this position will expose candidates to numerous design disciplines making this position a good growth opportunity for engineers who want to broaden their skillset. Successful candidates are expected to be able to support the resolution of supplier build and test issues, resolve production build, test, and integration problems related to the design of the hardware, and support legacy systems with upgrades and obsolescence redesigns
Required Skills: 4+ years of experience in the field of engineering or related technical disciplines Ability to obtain a Department of Defense Security Clearance within one year of start date Experience in the test and troubleshoot of RF, analog, or mixed signal circuits and systems in both a factory and lab setting Experience working in cross functional teams that include Engineering , Integrated Supply Chain, Operations, and Quality team members Required: This position requires the eligibility to obtain a security clearance. Except in rare circumstances, only U.S. citizens are eligible for a security clearance.
 
 
Job Number: 1810090144
Job Location: Tewksbury, MA
Duration: 12 months
Input Date: 09/05/2018
Last Updated: 01/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Terry Brooke
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mitBAAQ&URLSource=cjhunter

Electrical Engineer - Clearance

Description:
PDS Tech is seeking an Electrical Engineer in Marlborough, MA
Must have active Secret Clearance
The Power and Electronic Systems Department is responsible for design engineering including the following areas:• Power System Design - Power System Noise, System Simulation and Modeling, Solid State Transmitters, Tube Transmitters, High Voltage Design, Power Sources, Generators• Power Conversion - AC/DC, DC/DC and DC/AC, Linear and Switching Supplies, Power Factor Correction (PFC), Zero Voltage Switching (ZVS), Resonant Circuits, Synchronization, Noise Controls• Power Distribution - Ground, Air, Shipboard, and Space, Power Generation, Line Voltage, High Current, Low Voltage, Micro-Power, DC, AC, Multi-Phase Power Control, Fault Reporting, Isolation, Protection Circuits, Redundant Systems• Power Sub-System Design - Filters, Harmonic Control, EMI, Circuit Simulation, Magnetics, Protective Relay Systems, Short Circuit and Stress Analyses• Control Systems – Servo Control Systems, Motor/Power/Process Control, Digital Feedback Systems, Command Generation, Inertial Stabilization, Navigation Algorithms
 
Required Skills:• BS in Electrical Engineering or equivalent• 6+ years of related experience• Modeling and simulation using PSPICE, MATLAB/Simulink, or similar computer based tools• Excellent written and verbal communication• Required: This position requires active Secret Clearance.
 
Job Number: 1810090154
Job Location: Marlborough, MA
Duration: 12 months
Input Date: 09/04/2018
Last Updated: 01/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Michael Accunzo
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mitzAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Clearance URGENT critical fill CA

Description:
163107
Engineering - Electrical Engineer
Qty: 1
Desired Start Date: 9/5/2018
End Date: 8/2/2019

Job Description:

Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes. The applicant will be focused on the electrical wiring and harness assembly diagram design and development. Duties include creating wiring diagrams and harness assembly diagrams, resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised C-5 manufacturing wiring documents (Wire Routing Documents (WRDs), Termination Aids (TAs) and Wire Harness Master (WHM) sketches). Candidate will be part of a team effort to develop C-5 wiring from design to installation, to include liaison between C-5 Avionics Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance to Specifications.

Engineer required to support air vehicle electrical harness component and installation design and fabrication. Associated tasks include the development of air vehicle electrical drawings and drawing revisions, and coordination with production operation personnel support of air vehicle assembly (aircraft shop support).

An ideal candidate will possess experience in the following:

• Working knowledge of CATIA and the CATIA Harness function
• Familiarity with electrical and electrical schematics (CAPITAL, connectors, back-shells, aircraft wire types)
• Mechanical knowledge of aircraft hardware (aircraft structure, miscellaneous small parts)
• General drawing and drawing revision practices

CNE Work Location: Palmdale, CA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $34.23 - $68.00 Hourly OT

Areas of Expertise CATIA No 8 4 - 6 Years
 
Job Number: JE-1149-1S5
Job Location: Palmdale, CA
Rate: open
Per Diem: no
Duration: 11 months
Input Date: 10/24/2018
Last Updated: 10/30/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Power (OK)

Description:
POSITION OVERVIEW- KEY JOB ELEMENTS:
This position is for the power electrical engineer position. This candidate will provide technical expertise, project management, as well as, project development for the client's electrical system in this plant facility. This engineer will handle all aspects of this plant's electrical system and provide electrical engineering for capital improvement projects (refinery). There will be occasion where support will be needed in the instrumentation area. BSEE REQUIRED.

Key Job Duties and Job Responsibilities:
These key job elements are included but not limited to the Electrical Engineer position:

This candidate will be required to oversee power requirements and coordinate with other projects in progress. Conduct system analysis studies (load flow, voltage drop, short circuit, etc.) for capital improvement projects. Prepare electrical equipment specifications and obtain and review all vendor quotes for electrical equipment. Must interface with other engineering personnel, construction contractors, and vendors during the project. Ensure during planning all work is completed within corporate safety guidelines and promote same throughout the project to completion.

Additional job responsibilities required for this position are as follows:
Review and approve electrical drawings for projects pertaining to equipment location, one-line diagrams, electrical area classification and schematics. Prepare cost estimates (both budgetary and definitive) for current and future electrical projects. Must support multidisciplinary projects by providing electrical expertise and additional recommendations.

Must be able to participate in the development of work scope for electrical equipment related to turnaround and capital projects. Develop projects to meet the reliability division's objectives including reliability, capacity, growth, maintainability and expendability.

Inspections: will be required to perform safety inspections and initial startup safety reviews.

Cost Estimates: will be required to manage electrical projects, such as cost and scheduling, safety, and other miscellaneous from conceptual studies, design, construction and safe start-up. Will be required to perform preliminary engineering studies by preparing project objectives letter, milestone schedule and cost estimate for current projects and future projects.

Standards and Safety: Must adhere to company standards in electrical design, equipment specifications, construction and testing. Must have the ability to apply and interprete the National Electric Code and other applicable codes and standards (e.g. NFPA, API, UL, API, and other). Must adhre to the county and city regulations including special equipment approvals (UL) and building permits.

Additional skills/requirements:
1. Develop one-line diagrams that will accomplish the needs of a project and the reliability of the refinery.
a. How implementation will show how to control cost on a project while allowing expansion in the future
b. Show protective relaying schemes.
1. Develop options and develop Substation layouts that will accomplish the need of a project and the reliability of the refinery.
a. How implement enough to control cost on a project while allowing expansion in the future
b. Show equipment layout using appropriate working space requirements.
1. Brainstorm options and develop Medium Voltage and low voltage feeder routing using either cable tray or conduit in classified areas.
a. Use proper grounding.
b. Structural steel to run the tray on.
c. Interface between multiple engineering disciplines required to get the steel done.
1. Conduct and evaluate power studies (with ETAP) of electrical systems to verify that the new electrical equipment will work for:
a. Load Flow
b. Voltage Drop
c. Incident Energy (Arc Flash)
d. Short Circuit Current Analysis (Bracing)
1. Medium Voltage Switchgear experience in design
a. Writing specifications
b. Approve vendor (shop) drawings
c. Incorporating protective relaying schemes using Schweitzer relays
d. Familiar with Client Powervac switchgear and Client's new Entelliguard system
1. Medium Voltage MCC's (Specific to Allen Bradley)
a. Writing specifications
b. Approve vendor (shop) drawings
c. Brainstorm electrical schematics used to install the MCCs
d. Incorporating protective relaying schemes using Schweitzer relays
1. Medium Voltage Bus Duct
a. Writing specifications
b. Approve vendor (shop) drawings
1. Unit substation Medium & Low Voltage transformers
1. Writing specifications
2. Approve vendor (shop) drawings
3. Incorporating protective relaying schemes using Schweitzer relays
1. Low Voltage Switchgear (Schweitzer relaying and Client's new Entelliguard)
a. Writing specifications
b. Approve vendor (shop) drawings
c. Incorporating protective relaying schemes using Schweitzer relays
d. Familiar with Client Powervac switchgear and Client's new Entelliguard system
1. Low Voltage Bus Duct
a. Writing specifications
b. Approve vendor (shop) drawings
1. Low Voltage MCCs
a. Writing specifications
b. Approve vendor (shop) drawings
c. Brainstorm electrical schematics used to install the MCCs

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-100218OKPCR
Job Location: Ponca City, OK
Rate: $ BOE/HR
Per Diem: Possible Split
Overtime: Possible
Duration: 11 Months
Start Date: 10/01/2018
Input Date: 10/03/2018
Last Updated: 10/04/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer 1-4 - SECRET CLEARANCE REQUIRED

Description:
Multi-position from Associated to Staff level open for Direct Hire Only
All must have an ACTIVE SECRET CLEARANCE
Candidate will be responsible for supporting the design and overall system development of the operational (tactical) electrical subsystems for the PDV and the booster. Knowledge of flight avionics is desired. Engineer will also be responsible for support of systems engineering (compatibility analysis, FFMEA generation, specification development).

FOR MORE DETAILS ON EACH POSITION GO TO www.hi-tecsolutions.com/jobs
 
Job Number: 256-258
Job Location: multi-locations, AL/CO/PA
Rate: 107K - 226K
Per Diem: no
Overtime: possible
Duration: Direct Hire
Start Date: ASAP
Input Date: 10/31/2018
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: 2501 E PIEDMONT RD STE 103
City, State: MARIETTA, GA 30062-7753
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

Electrical Engineer 2 - O/M - LA

Description:
Chipton-Ross is seeking a Electrical Engineer 2 for an opening in Avondale, LA.

RESPONSIBILITIES:
Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned shipboard systems. Candidate will perform the following: Research, development, and design of electrical components, equipment, systems, and networks in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve vendor proposals; review, comment on, adjudicate and approve vendor furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testing; develop drawings and other documents IAW Mil-Specs and contract drawings; interface with other disciplines and departments to ensure a seamless integration of assigned systems into the shipboard environment; address and resolve technical issues, and make decisions on problems in his/her area of responsibility; support shipbuilding production department as required.

REQUIRED EXPERIENCE:
Bachelor's of Electrical Engineering with two years of engineering experience or Master's of Electrical Engineering with no prior experience, or similar degree background. . Previous shipbuilding experience is highly desired. A qualified candidate should be proficient in Microsoft Office applications and AutoCAD 2014.

ADDITIONAL EXPERIENCE:
It is preferred that the candidate be familiar with shipboard Interior Communications systems such as Switchboards, Telephone systems, Announcing, TV and Audio, Alarms, Indicating, etc. and have an understanding of the typical shipboard interfaces, interconnections, and integration requirements. Familiarity with electrical power distribution systems, control systems, and C4ISR systems is a plus. Current clearance is also a plus.

EDUCATION:
Bachelor's of Electrical Engineering

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 155942
Job Location: Avondale, LA
Rate: $42 to $46.00 DOE
Duration: 1 year
Input Date: 06/03/2016
Last Updated: 01/17/2019
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer III ( New Church, VA ) 8027260

Description:
Electrical Engineer III ( New Church, VA ) 8027260
12 Month Contract

Pay rate: $50/hr w2 , maybe more for the right candidate.


Integration & Test Electrical Engineer will support the Antares Spacelift Program. The Antares Program launches spacelift vehicles out of Wallops, VA, to delivery supplies and scientific equipment to the Space Station. The Integration & Test Engineer will manage assembly, integration, and test of space launch vehicle flight hardware at the Wallops launch site. Specific duties include hands-on electrical integration of flight hardware, developing/maintaining processes and procedures for vehicle assembly and vehicle testing, hands-on electrical testing of flight hardware, and documenting and pursuing root cause of discrepancies found with hardware.
• Bachelors Degree (BS) in Electrical Engineering • 10 years of electrical hands-on integration & test or related experience is required • Experience with rocket systems is required

JOB DESCRIPTION:
• Need a strong Integration & Test Electrical Engineer with rocket systems experience. 10 years of hands-on integration & test experience in a fast paced environment.
Top three skills:
• Hands-on Electrical integration of flight hardware & testing of flight hardware
• Bachelors Degree (BS) in Electrical Engineering
• Developing processes and procedure
 
Job Number: 8027260
Job Location: New Church, VA
Rate: 50
Per Diem: yes
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 12/26/2018
Last Updated: 01/08/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Email: timmahaney@talentproconsulting.com
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer – RS3

Description:
Electrical Engineer – RS3
(U.S. Citizenship Required*)
Centennial, CO
2018-7001

Responsibilities:
• Ground Engineer for Cyber Security
• Focal point for network security monitoring, compliance and audit validation for these command and control systems.
• Research, develop, design, and test electrical components, equipment, systems, and networks.
• Design electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
• Architecture, design, and maintenance for a large distributed command, control, and communication systems with a focus on local area and wide area networks and Cyber security for the overall system.
• Technical support for the operation and administration of network infrastructure, including layer 2/3 switches, firewalls, sniffers, and cable plants.

Qualification:
• Certifications or ability to acquire certification in SEC+, CISA (Certified Information System Auditor), CISSP (Certified Information Systems Security Professional) and CEH (Certified Ethical Hacker) desired
• Knowledge of configuration management, network security and risk management, device and system troubleshooting, network monitoring & diagnostics; hardware and software upgrades, technology review & evaluation, and an in-depth understanding of the OSI model.
• An understanding of switch configuration, multicast, spanning tree, and PAN firewall configuration and policy is desired.
• Proficiency in the development and maintenance of requirements implementation, design implementation and validation of the control systems to meet cyber security requirements that include IS0 27001, CNSSI 1253 and NIST 800-53.
• Teamwork and ability to work with multiple organizations including corporate IT and operational organizations
• A self-starter and internally motivated individual
• Maintain latest cyber security techniques and proficiencies
• System engineering skills and experience with requirements and verification of requirements
• Large complex electrical control system development and start up experience
• Experience working with government agencies including the Air Force and DOD audit agencies
• Demonstrable communication skills (verbal and written; including presentations).
• Excellent verbal and written communications skills as well as organizational skill
• Must be able to obtain, and maintain security clearance
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Requires a bachelor’s degree and 4 -8 years of experience
• BS in Electrical Engineering, Computer Information Systems/Technology, Cyber Security, Math, Physics

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7001
Job Location: Centennial, CO
Rate: Based on experience
Duration: 9 Months
Input Date: 09/27/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Gregory Schaal
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineering Test Specialist

Description:
Notes from the Hiring Manager:

* Testing background with electrical work experiences; ability to read blueprints, engineering drawings
* Networking and circuitry exp with above average computer knowledge (Linux, VMWare, Redhat, etc.)
* Awareness/knowledge of electrical safety and power requirements

Summary:

To perform Configuration and Acceptance Testing of Complex Electronic Systems / Assemblies. Performs a variety of complex technical functions related to the support of manufacturing and engineering activities such as set-up, operation, testing or calibration of systems, circuitry, networking, software, and specialized equipment within a production setting.

Job Description:

> Knowledge of analog and digital symbol identification
> Knowledge of test practices and procedures.
> Personal computer skills required to configure and load SW.
> Ability to read/interpret schematics, assembly drawings, parts lists and wire data lists.
> Ability to operate test equipment such as: ohmmeters, digital voltmeters, generators, counters, oscilloscopes, and personal computers.
> LINUX Operating System experience able to run detailed procedures to configure Firmware and load Software, Test and Troubleshoot, RF Experience, and run Acceptance Test Procedures.

Knowledge, Skills, And Abilities Required:

> 5+ years of experience with an Associate’s Degree (highly preferred) or technical training in a related field
> Must be a US Citizen (applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information).
> State of the art knowledge of electronics - both digital logic and analog basics.
> Knowledge of Linux, VMWare, Redhat & other software packages used in virtual machines.
> Ability to operate test equipment and build test tooling in fully integrated electronic system.
> Knowledge of test practices and procedures, specifically trouble shooting methodology.
> Ability to read/interpret schematics, assembly drawings, parts lists and wire data lists.
> Ability to understand component specifications.
 
Job Number: 028_2018
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 12 +/- Months
Start Date: ASAP
Input Date: 06/06/2018
Last Updated: 10/16/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

Electrical Engineers

Description:
Vehicle systems integration
 
Job Location: OH/MI/IN
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power Systems Engineer (Aerospace) - China

Description:
Leading aerospace company are seeking an Electrical Power Systems Engineer for the design and modelling of aircraft electrical systems. This will be working on a range of commercial aircraft development projects, based at their modern facility in Shanghai. Duties and responsibilities will include:-

* Planning and building electrical system simulation platform

* Develop and promote design standards for electrical system

* Define the design specification of electrical systems and equipment

* Simulation model design review

* Responsible for electrical power system architecture, communication interface design, power quality definition

The client is seeking an Senior Electrical Systems Engineer with extensive experience in the simulation, analysis and design of electrical power systems for commercial aircraft (e.g. APUs, power generation systems etc.) This will include a good knowledge and use of simulation and design tools, including Matlab/Simulink, Saber etc.

These positions will be on a fixed-term contract basis of 2-3 years initially, with a strong likelihood of further work beyond this. They come with an attractive salary package which includes allowances for accommodation, home leave (typically 4 times a year), local transport, healthcare etc
 
Job Number: JO01000000155
Job Location: China
Rate: Negotiable
Duration: 2-3 years
Start Date: Sept 18 onwards
Input Date: 10/09/2018
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical R&D Engineer ~ AW

Description:
JOB DESCRIPTION
Responsible for design level work to mitigate EMC Issues including EMC Pre-compliance.

Candidate Qualifications:
1. BS in Electrical Engineering, Electronics Engineering, Engineering Technology, or equivalent Technical Degree
2. 7 plus yrs of Electrical Engineering Experience
a. Medical Devices Directive (MDD)
b. Analog and Digital Circuit Design
c. Altium to Document and Capture Electronic Schematics
d. Electronic Proto-typing, Troubleshooting, and Root-Cause Analysis
3. EMC
a. EMC Standards
b. EMC Testing including EMC Test Protocol for pre-compliance testing
c. EMC Compatibility and Compliance

Preferred Qualifications
1. Strong Microprocessor-controlled Hardware Development
2. Low Power design for portable electronic devices
3. Embedded SWE Development for Medical Devices
4. Assembly-level and C Code development, Real Time Signal Processing, and I/O control
5. Wireless Communication (Bluetooth, ZigBee, WIFI [IEEE 802.11, 802.15])
6. ISO 13485, FDA Design Controls, IEC 6061
7. Experimental Methods: DOE, Hypothesis Testing, and Scenario Analysis
 
Job Location: Plymouth, MN
Rate: 50-64/hr
Per Diem: Split
Overtime: Yes
Duration: 6-12 Mos
Start Date: ASAP
Input Date: 09/27/2018
Firm Name: ENTEGEE ENGINEERING TECHNICAL GROUP
Attention: Alan Wilson
Address: 5620 INTERNATIONAL PKWY
City, State: NEW HOPE, MN 55428-3047
Phone: 763/577-9000
Fax Phone: 763/577-9010
Website: www.entegee.com

Electrical Systems Design Engineer 4 - 373544

Description:
**Requires the ability to obtain Secret Clearance**

Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
Qualification:
─ Electrical Power System >8 years (Required)

Experience:
─ Ability to develop work packages and design concept from statement of work and system requirements.
─ One line, three line AC & DC power architecture and power distributions.
─ Power system load flows, AC 1ph/3ph, and DC load analysis.
─ Equipment proper breaker sizing and wire sizing/voltage drop analysis.

Knowledge:
─ Electrical equipment such as integrate drive generator, auxiliary power unit, generator control unit, current transformer, generator breaker/relays, frequency 400Hz/60Hz converter, voltage AC/DC converters, and other protective devices.
─ Mil-Std-704; DO-160 power quality and FAR 25 FAA Generating Power System.
─ Hand-on test equipment is preferred.
─ Capability to provide leadership, guidance to less experienced engineer team members.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in electrical engineering.
 
Job Number: 373544
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 09/05/2018
Last Updated: 01/17/2019
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Electrical Systems position is responsible for supporting for the development, testing and certification of the electrical aspects of the various systems and components and/or controllers on the airplane (e.g. ECS, fuel, hydraulics, engines, fire protections, anti-ice, lights, electrical power, wiring, etc.).
 
Job Number: 10-15-18-1
Job Location: Moses Lake, WA
Rate: open/neg
Per Diem: no
Duration: Direct hire
Start Date: ASAP
Input Date: 10/09/2018
Firm Name: TECH RESOURCES LLC
Address: 537 WARREN AVE
City, State: ST LOUIS, MO 63130
Phone: 314/862-2090

Electrical Systems and Equipment (DER)

Description:
Electrical Systems and Equipment Designated Engineering Representative (DER) or Engineering Authorized Representative (EAR) within an Organization Designation Authorization (ODA Unit-member). This person, if not already an EAR within companies ODA will be expected to be qualified to make application to be added to companies Enterprise ODA as an Engineering AR upon being hired into the company. Should be qualified to review engineering data, review and approve test plans and reports, system test witnessing and review/approval of electrical load analysis. Additionally, Major Repair and Alteration approvals will be required of this position under the ODA. Fault Hazard assessment and System Safety assessments are a plus, but not necessarily required. Candidate should aspire to have these added to their list of authorities if not already present.
Electrical Systems and Equipment (DER) works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development Responsible for an entire engineering project of major complexity within established scope 2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge 4. Leads the development of innovative principles and ideas 5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements 6. Works under consultative direction; uses independent judgment to accomplish objectives 7. Develops standards and guides for diverse engineering activities 8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum applicable to the respective job position required. 13 yrs. specific technical discipline or 15 yrs. broad end experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Appleton, WI
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/20/2018
Last Updated: 01/11/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/31/2017
Last Updated: 01/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

Electrical Technician Level 2 - CA

Description:
Chipton-Ross is seeking an Electrical Technician Level 2 for an opening in Santa Barbara, CA.

RESPONSIBILITIES:
Provides engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors

REQUIRED EXPERIENCE:
Experienced integrated circuit technician to help advance the state of the art in infrared and visible imager readout integrated circuits (ROICs). Significant experience with physical layout of mixed signal VLSI CMOS transistor level designs is required. The selected candidate will perform silicon layout of analog and digital submicron transistor level designs in support of advanced infrared cameras and imagers. Designs include ultralow noise analog circuit blocks, low power analog to digital conversion, high speed multi GHz data transmission and serializers. MUST HAVE CMOS integrated circuit layout experience

PREFERRED EXPERIENCE:
Schematic capture, design verification and simulation.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
4/10, Monday-Thursday 3:00 pm - 01:30 am
Full-Time


 
Job Number: 173751
Job Location: Santa Barbara, CA
Rate: Up to $45.00 DOE
Duration: 12 Months
Input Date: 09/07/2018
Last Updated: 01/17/2019
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Avionics Engineer

Description:
Provide SME level support for the research, design, development, implementation and troubleshooting of integrated aircraft systems.
Develop analysis methodologies for fault isolation of helicopter mechanical and dynamic systems/components. Report to the Sr. Director of Engineering.
Required:
Master's in Electrical Engineering. 3 to 6 years OR Bachelors and 5 to 8 years directly related experience supporting design, system integration, and installation, testing and troubleshooting of Avionics/Electrical Systems. At least 6 months of this experience must have taken place within the prior year. A published author on topics including a minimum of 2 of the following: system architecture design, analog/digital controls, topics that include: methods of detecting/mitigating or designing robust system protection for EMI/EMC, GPS signal acquisition/transmission, glass cockpits and/or Heads Up Displays (strongly preferred).
Intermediate to Advanced knowledge of DO-178, DO-160 required
Proficiency with product line of helicopters strongly preferred
Autocad (preferred)
CATIA V5 (preferred)
 
Job Number: 888592
Job Location: Grand Prairie, TX
Rate: 65-76 hourly
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 10/04/2018
Last Updated: 10/11/2018
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: 2501 E PIEDMONT RD STE 103
City, State: MARIETTA, GA 30062-7753
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

Electro/Mechanical Design Engineer

Description:
-Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
-Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
-Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
-Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T
 
Job Number: 0878
Job Location: Multiple
Rate: 50-80/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months plus
Start Date: 2/3 wks
Input Date: 05/29/2018
Last Updated: 01/17/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Circuit Designer - 4 / OrCAD PSpice PCB LRU CA

Description:
Electronic Circuit Designer - 4 (Job Number: 18018662)

Number of Openings: 1

Location(s): United States-California-San Diego


Shift: 1st Shift

Target Start Date: Oct 8, 2018

Target End Date: Mar 8, 2019

Pay Rate: $62 to $64/hr

Work Schedule: 9/80A

Duration of Assignment: 3-8-19

Job Description

Qualified applicant to support electronics modernization effort. The SOW include performing detail electrical circuit design, circuit level analysis, support qualification testing, preparing ATP and QTP and support electrical circuit and LRU manufacturing.


Basic Qualifications:

9+ years experience with Electrical Engineering Bachelor’s Degree or an equivalency of 17 years plus High School Diploma.

Experience with OrCAD/pspice

•Experience with PCB troubleshooting
•Experience with PCB layout and routing
•Strong verbal and written communications


Preferred Qualifications:


Working knowledge of engineering practices/procedures regarding electronic components

•Experience with Altium Designer
•Experience with NGC circuit design process
•Experience with TeamCenter
 
Job Number: MB-1680
Job Location: San Diego, CA
Rate: 64/hr max
Per Diem: no
Duration: 5 months
Input Date: 10/04/2018
Last Updated: 12/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electronic Component Engineer (177)

Description:
*This is a full time, 9 month, contract position located in Grand Prairie, TX*



We are seeking an electronics component engineer who will be working on DoD/military component analysis, selection, screening, parts qualification and de-rating of electronic components. Duties will include component material selection, new component release/qualification, handle component related failures, handle component noncompliance issues, able to identify pure-tin and counterfeit part detection.



Required:
*2 years’ experience working as an engineer within the electronics components field.
*Electrical component manufacturing process and physical property analysis experience
*Able to get a security clearance after starting, which requires applicants be US Citizens.
*Engineering degree in material science or equivalent



Pluses:
*Experience in the disposition of Q-Notes.
*Familiar with parts release processes, and formal configuration boards.
 
Job Number: 177
Job Location: Grand Prairie, TX
Input Date: 01/10/2019
Last Updated: 01/15/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Email: tom@cssstaffing.com
Website: www.cssstaffing.com

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 04/07/2017
Last Updated: 01/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Engineer

Description:
NOW HIRING: Electronics Engineers in Huntsville, Alabama! Send a resume to our GCP Recruiting team to be contacted about more information for these positions!

The ideal candidate for this position will perform the following tasks:
* Will be responsible for supporting the design and overall system development of the operational (tactical) electrical subsystems for the PDV and the booster.
* Knowledge of flight avionics is desired. Engineer will also be responsible for support of systems engineering (compatibility analysis, FFMEA generation, specification development).

Mandatory Qualifications and Experience:
* Bachelor's degree or higher in Electrical/Electronic Engineering other related program degree from an accredited college/university.
* Experience and working knowledge/background of Missiles, Re-entry Vehicles or spacecraft.
* Technical experience in avionic systems, flight termination systems, flight telemetry systems, instrumentation or computer-based ground support equipment.
* Experience with Microsoft Office suite (Word, PowerPoint, Excel).
* Must have an active INTERIM or higher to be considered for this role.
* Must be U.S. Citizen.
* Experience with Test and Measurement Equipment.
* Occasional travel to US locations may be required.

The ideal candidate for this position will possess the following skills and characteristics:
* Oral and written communication skills and analytical skills.
* Needs to have the ability to convey technical data and concepts in concise messages and presentations.
* Ability to learn or have electronic troubleshooting skills.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 128988
Job Location: Huntsville, AL
Duration: 2 years
Start Date: 12/03/2018
Input Date: 10/02/2018
Last Updated: 10/17/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Engineer 2

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

Electronics Engineer 2
(U.S. Citizenship Required*)
Huntsville AL
2018-7030
Responsibilities:
• Support design and overall system development of the operational (tactical) electrical subsystems for the PDV and the booster.
• Support systems engineering (compatibility analysis, FFMEA generation, specification development).

Qualification:
• Required – active Secret clearance. Candidates without active clearance will not be considered.
• Technical experience in avionic systems, flight termination systems, flight telemetry systems, instrumentation or computer-based ground support equipment.
• Experience and working knowledge/background of Missiles, Re-entry Vehicles or spacecraft.
• Technical experience in avionic systems, flight termination systems, flight telemetry systems, instrumentation or computer-based ground support equipment.
• Experience with Microsoft Office suite (Word, PowerPoint, Excel).
Preferred:
• Oral and written communication skills and analytical skills. Needs to have the ability to convey technical data and concepts in concise messages and presentations. Ability to learn or have electronic troubleshooting skills. Experience with Test and Measurement Equipment. Occasional travel to US locations may be required.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree or higher in Electrical/Electronic Engineering other related program degree from an accredited college/university.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7030
Job Location: Huntsville, AL
Rate: Based on experience
Duration: 15 Months
Input Date: 10/03/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Sallye Smith
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Engineer Sr 3

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

Electronics Engineer Sr 3
(U.S. Citizenship Required*)
Huntsville, AL
2018-7031
Responsibilities:
• Support design of the telemetry and instrumentation systems for the PDV and booster.
• Support development of applicable hardware for hardware in the loop (HWIL) and verification test bed (VTB) development.
• Occasional travel to US locations may be required.

Qualification:
• Required – active Secret clearance. Candidates without active clearance will not be considered.
• Technical experience in avionic systems, flight termination systems, flight telemetry systems, instrumentation or computer-based ground support equipment.
• Experience and working knowledge/background of Missiles, Re-entry Vehicles or spacecraft.
• Experience with Microsoft Office suite (Word, PowerPoint, Excel).
Preferred:
• Excellent oral and written communication skills and analytical skills.
• Ability to convey technical data and concepts in concise messages and presentations.
• Proven Electrical/Electronic troubleshooting skills.
• Experience with and Measurement Equipment.
• Experience with Root Cause/Corrective Action techniques.
• Experience with CPE process and familiar with the Material Review Board process is a plus.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree or higher in Electrical/Electronic Engineering other related program degree from an accredited college/university.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7031
Job Location: Huntsville, AL
Rate: Based on experience
Duration: 15 Months
Input Date: 10/03/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Sallye Smith
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Engineer Stf 4

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

Electronics Engineer Stf 4
(U.S. Citizenship Required*)
Huntsville, AL
2018-7032
Responsibilities:
• Support design of telemetry and instrumentation systems for the PDV and booster.
• Support development of applicable hardware for hardware in the loop (HWIL) and verification test bed (VTB) development.
• Occasional travel to US locations may be required.

Qualification:
• Required – active Secret clearance. Candidates without active clearance will not be considered.
• Experience and knowledge of telemetry avionics is required. This includes avionics such as multiplexer encoders, encryptors, GPS receivers, RF subsystems (antennas, transmitters, couplers), and instrumentation (vibration transducers, thermocouples, pressure transducers). In addition, experience with avionics testing, telemetry documents, and range tracking (RCC-324) is desired.
• Experience and working knowledge/background of Missiles, Re-entry Vehicles or spacecraft. Technical experience in avionic systems, flight termination systems, flight telemetry systems, instrumentation or computer-based ground support equipment.
• Experience with Microsoft Office suite (Word, PowerPoint, Excel).
Preferred:
• Excellent oral and written communication skills and analytical skills.
• Able to convey technical data and concepts in concise messages and presentations.
• Proven Electrical/Electronic troubleshooting skills. Experience with Test and Measurement Equipment.
• Experience with Root Cause/Corrective Action techniques.
• Able to interface with Program scheduling personnel and Cost Account Manager (CAM) is a plus.
• Experience with the CPE process and familiar with the Material Review Board process is a plus.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree or higher in Electrical/Electronic Engineering other related program degree from an accredited college/university.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7032
Job Location: Huntsville, AL
Rate: Based on experience
Duration: 15 Months
Input Date: 10/03/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Sallye Smith
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician

Description:
Location: Fort Worth, TX
Rate: $33.91/HR
Duration: 1 year contract (Long-term potential for the right candidate)
Per Diem Split: Yes (if eligible)
Overtime: Possible

****MUST be a U.S. Citizen****

Job Description:
- Consist of engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility.
- Some climbing on ladders may be required as well as lifting up to 25lbs.
- These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings.
- Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

Requirements:
- An AA in Electrical or Electronics Engineering is highly preferred.
- High School Diploma or GED is required.
- 3+ years of Hand Soldering experience is mandatory.
- Experience with fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings required.
- Previous military experience highly desired but not required.
 
Job Number: 9766
Job Location: Fort Worth, TX
Rate: $33.91/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 10/03/2018
Last Updated: 10/31/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrophysics Engr/Scien 4

Description:
Electrophysics Engr/Scien 4

Location: Oklahoma City, OK
Duration: 6 Months

Job Description:
Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate complex systems and components into higher level systems and platforms. Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts critical tests of various kinds to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Generates major sections of proposals to support development of new business. Works under minimal direction.

Work electromagnetic effects including EMC, HIRF, Lightning, TEMPEST, EMP, RF Co-Site, P-Static for Commercial Derivative and/or Organic Military programs.

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in electrical engineering. ABET is the preferred, although not required, accreditation standard.

Experience performing or overseeing MIL-STD-461 or DO-160 testing, aircraft level EMC testing, TEMPEST, Nuclear Hardening for EMP, FAA Certification for EME including EMC, P-Static, HIRF, Lightning. FAA Unit Member or AR Tickets in EME a plus.

Skill Code: 62Q-Electromagnetic Compatibility

Please share updated resume at ravi@iconma.com if interested
 
Job Number: 18-15157
Job Location: Oklahoma City,, OK
Input Date: 09/07/2018
Last Updated: 10/01/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Applies technical expertise in the development of C software for embedded multi-processor systems. Develops complete software solutions and influences the successful completion of supported programs and projects. Reviews software products for soundness of technical correctness and adequacy. Produces documentation related to the design and release of software artifacts. Understands and utilizes Agile software development methods (including Scrum), automation, and continuous integration. Displays initiative and can work well as a member of a team. Follows organizational/program/project processes and procedures. Interacts with senior software personnel through both written and verbal communication.

Roles and Responsibilities

Qualifications and Education Requirements

Required Skills/Experience: • Minimum of 5 years of experience developing real-time embedded software in C; • Experience with bare metal system and device driver development & debugging; • Experience with unit & integration test development and execution for real-time embedded software; • Experience with hardware/software integration for real-time embedded software; • Experience with and knowledge of Windows computing environments; • Experience with all phases of software development including requirements analysis, design, implementation, unit test, integration, and maintenance; • Bachelor’s or Master’s Degree in Computer Science, Computer Engineering, Mathematics, Electrical Engineering, or a related field

Preferred Skills

Desired Skill/Experience: • Experience developing software using an Agile Software methodology with the Scrum Framework; working well in a dynamic team environment; • Excellent written and verbal communication skills; • Ability to work in an integration lab environment (computer in the loop / hardware in the loop) executing software/hardware integration activities; • Proficiency utilizing software debugging tools to troubleshoot software implementation and ensure integrity of the software products; • Understanding of embedded computer architecture and computer hardware optimization techniques; • Optimization/performance of algorithms in embedded code on target hardware; • Working knowledge in the build automation tool Make on Windows platforms; • Working knowledge and experience with configuration management tools, in particular Rational Synergy; • Experience with C# for Windows application development; • Experience with Xilinx SDK with softcore processor; • Experience with Microsemi SmartFusion devices; • Experience with Eclipse/CDT integrated development environment

Job Type: Contract
 
Job Number: JT-4504
Job Location: Tucson, AZ
Rate: $90 & up
Per Diem: no
Overtime: possible
Duration: 24 mos
Start Date: ASAP
Input Date: 10/11/2018
Last Updated: 10/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Justin Taylor
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer (GEU ECP) - Clearance

Description:
Description/Comment: Applies technical expertise in the development of C software for embedded multi-processor systems. Develops complete software solutions and influences the successful completion of supported programs and projects. Reviews software products for soundness of technical correctness and adequacy. Produces documentation related to the design and release of software artifacts. Understands and utilizes Agile software development methods (including Scrum), automation, and continuous integration. Displays initiative and can work well as a member of a team. Follows organizational/program/project processes and procedures. Interacts with senior software personnel through both written and verbal communication. ********************************************
Required Skills/Experience: • Minimum of 5 years of experience developing real-time embedded software in C; • Experience with bare metal system and device driver development & debugging; • Experience with unit & integration test development and execution for real-time embedded software; • Experience with hardware/software integration for real-time embedded software; • Experience with and knowledge of Windows computing environments; • Experience with all phases of software development including requirements analysis, design, implementation, unit test, integration, and maintenance; • Bachelor's or Master's Degree in Computer Science, Computer Engineering, Mathematics, Electrical Engineering, or a related field; • Active DoD Secret (or higher) clearance ********************************************
Desired Skill/Experience: • Experience developing software using an Agile Software methodology with the Scrum Framework; working well in a dynamic team environment; • Excellent written and verbal communication skills; • Ability to work in an integration lab environment (computer in the loop / hardware in the loop) executing software/hardware integration activities; • Proficiency utilizing software debugging tools to troubleshoot software implementation and ensure integrity of the software products; • Understanding of embedded computer architecture and computer hardware optimization techniques; • Optimization/performance of algorithms in embedded code on target hardware; • Working knowledge in the build automation tool Make on Windows platforms; • Working knowledge and experience with configuration management tools, in particular Rational Synergy; • Experience with C# for Windows application development; • Experience with Xilinx SDK with softcore processor; • Experience with Microsemi SmartFusion devices; • Experience with Eclipse/CDT integrated development environment
 
Job Number: 6
Job Location: Tucson, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Start Date: ASAP
Input Date: 10/10/2018
Firm Name: INTELLISWIFT SOFTWARE INC
Attention: Sandeep Kumar
Address: 39600 BALENTINE DR STE 200
City, State: NEWARK, CA 94560
Phone: 510/370-2600
Website: www.intelliswift.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer (GEU ECP) - Clearance AZ

Description:
163121 Embedded Software Engineer (GEU ECP)


Work Site Address : Tucson AZ
Job Number: (8500997)
Max Pay Rate: open
Start Date: ASAP
End Date: 24 Months
Position Type: Contract



Applies technical expertise in the development of C software for embedded multi-processor systems. Develops complete software solutions and influences the successful completion of supported programs and projects. Reviews software products for soundness of technical correctness and adequacy. Produces documentation related to the design and release of software artifacts. Understands and utilizes Agile software development methods (including Scrum), automation, and continuous integration. Displays initiative and can work well as a member of a team. Follows organizational/program/project processes and procedures. Interacts with senior software personnel through both written and verbal communication.


Qualifications and Education Requirements
Required Skills/Experience: • Minimum of 5 years of experience developing real-time embedded software in C; • Experience with bare metal system and device driver development & debugging; • Experience with unit & integration test development and execution for real-time embedded software; • Experience with hardware/software integration for real-time embedded software; • Experience with and knowledge of Windows computing environments; • Experience with all phases of software development including requirements analysis, design, implementation, unit test, integration, and maintenance; • Bachelor’s or Master’s Degree in Computer Science, Computer Engineering, Mathematics, Electrical Engineering, or a related field

Preferred Skills
Desired Skill/Experience: • Experience developing software using an Agile Software methodology with the Scrum Framework; working well in a dynamic team environment; • Excellent written and verbal communication skills; • Ability to work in an integration lab environment (computer in the loop / hardware in the loop) executing software/hardware integration activities; • Proficiency utilizing software debugging tools to troubleshoot software implementation and ensure integrity of the software products; • Understanding of embedded computer architecture and computer hardware optimization techniques; • Optimization/performance of algorithms in embedded code on target hardware; • Working knowledge in the build automation tool Make on Windows platforms; • Working knowledge and experience with configuration management tools, in particular Rational Synergy; • Experience with C# for Windows application development; • Experience with Xilinx SDK with softcore processor; • Experience with Microsemi SmartFusion devices; • Experience with Eclipse/CDT integrated development environment
 
Job Number: MB-R8500997S
Job Location: Tucson, AZ
Rate: open
Per Diem: no
Duration: 24 months
Input Date: 11/01/2018
Last Updated: 12/04/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software/Hardware Test Engineer (743)

Description:
CSS Staffing is seeking a Embedded Software/Hardware Test Engineer who will be responsible for integration and testing of embedded software and hardware components in the lab and in military vehicles. As an extension to this work, the candidate may be asked to develop and maintain software tools and simulations necessary to support the system, diagnose software/hardware defects, validate software fixes, and determine the root cause of a system failure. Design and implement simulations/emulations in Matlab/Simulink and National Instruments VeriStand/LabVIEW to run on an NI PXI controller. Support low level software integration activities as well as higher level systems integration and build-up of the actual prototype vehicles. Design and implement tools to support activities across all levels of integration. Review system requirements and use cases, performance specifications, and interface design documents. Support test case design and implementation in National Instruments TestStand.



Required Skills

*2+ years” experience with embedded software and hardware development or testing

*Development experience using C++ and/or Java

*Experience with Linux/Unix Operating System

*Experience with scripting languages (i.e. Bash, Perl, Python)

*Experience with configuration management tools (i.e. Git, SVN, ClearCase, etc.)

*BS Degree in Electrical/Computer Engineering, Computer Science, or related field.



Desired Skills

*Knowledge of vehicle communication busses (Ethernet, CAN, RS-232) and their protocols

*Experience with Ethernet and CANbus troubleshooting

*Experience with National Instruments’ products including Labview, VeriStand, & TestStand

*Experience supporting, implementing, and/or designing high fidelity software simulation models for SIL, HIL, & Real-Time test environments. (Simulink Preferred)

*Experience generating and writing supporting documents such as test system software requirements, user manuals / tools documentation, and software validation documents

*Experience with Matlab and Simulink
 
Job Number: 743
Job Location: San Jose, CA
Input Date: 10/03/2018
Last Updated: 10/12/2018
Firm Name: CSS STAFFING
Attention: Shay Rosen
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer II - (Sylmar, CA)

Description:
- Design solar panels, solar panel components, and associated support tooling in AutoCAD / Inventor Pro Suite. Also
design and update searchlight and high intensity illumination products for solar cell and solar panel test in AutoCAD /
Inventor Pro Suite.
- Work closely with Panel Product Engineers to translate customer schematics and specifications into manufacturing
efficient panel layouts and detailed manufacturing drawings, inclusive of Bill of Materials (BOMs), detail views, wiring
lists, schematics, and notes. Participate in round-table drawing reviews and CAD-check of drawings generated by others.
Generate soft tooling files from AutoCAD model. Learn to generate and check photomask drawings.
- Work with Illuminations Systems Product Engineers to generate and update part and assembly documentation needed
for procurement, manufacturing and assembly, including generation of 3D models, verification of model tolerances, and
model management in VAULT.
Work with Product and Process Engineers to identify and define the manufacturing support tooling necessary to safely
build and test the hardware in conformance with customer requirements. Generate tooling procurement and assembly
drawings and models using AutoCAD/Inventor Pro Suite.
- Support proposal and design trade efforts by providing rapid assessment of potential layout options. Assess
customer ICDs for manufacturability and provide feedback/improvement suggestions to enhance compliance and/or
manufacturability. Participate in LEAN improvement initiatives from both manufacturing and engineering perspective.
Continually advance ideas for streamlining both design/documentation and manufacturing processes by applying DFMAT
principles to all generated and reviewed deliverable hardware and manufacturing/support tool designs.
- Apply GD&T principles to assure manufacturability for internally built assemblies and to help resolve procurement
issues.
- Use Finite Element Analysis to support new design development and Root Cause investigations. Use Inventor CFD tool
to assess thermal and mechanical stress on deliverable hardware and to assess factors of safety for assembly/ground
support tooling.
- Assist Product Engineering in preparation of program SDRL documentation, including parts and material lists, mass
analysis, magnetic moment analysis, and detailed design descriptions for internal and customer review packages. Learn
to perform radiation and power analysis and to generate handling procedures and hardware test reports to backfill as
needed during periods of high volume activity.
Qualifications - Internal
Basic Qualifications
- Proficiency in 2D and 3D CAD modeling using AutoCAD/Inventor Pro Suite 11 (or higher), including:
- Use of block part libraries
- Generation of multilayer drawing packages, detailed assembly views, and schematics
- Familiarity with AutoDesk Vault
- Demonstrated working knowledge of basic GD&T principles
- Working knowledge of Finite Element Analysis techniques, preferably using Inventor Pro Suite Analysis package
(including definition of model, mesh, and boundary conditions and interpretation/presentation of the results)
- Ability to read/generate electrical schematics
- Experience with PCBs or other electronics packaging and wiring design
- Ability to communicate effectively with a diverse group of both internal and external customers and colleague
Preferred Knowledge / Skills
- Familiarity with VBA, SQL, or Labview
- Familiarity with basic physics of solar cells, photolithographic processes, Aerospace materials and assembly techniques,
PCBs and electronics, FEA and FMECA analysis techniques
- Ability to compile and present data using Excel and PowerPoint, and to generate/update procedural documentation using
MS Word
Typical Education / Experience
Degree and typical experience in engineering classification: Bachelor's and 2 or more years' experience or a Master's
degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in
engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required,
accreditation standard.
 
Job Number: EquipToolECA
Job Location: Sylmar, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 11/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer III & IV - (Everett, WA)

Description:
SEVERAL OPENINGS IN THE EVERETT/SEATTLE, AREAS.

Key Skill Needs:
• Experience leading control system design projects for aerospace and/or automotive industries.
• Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
• Experience with Programmable Logic Controllers (PLC’s), numerical control units (NCU’s), and motion control products and/or similar products from other major automation suppliers.
• Experience interfacing PLC’s with complex electrical, pneumatic, and hydraulic equipment.
• Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
• Familiarity with building HMI’s using industrial software design packages and best practices for HMI design and usability.
• Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
• Systems thinking and ability to isolate issues from a variety of interlinked systems.
• Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM’s) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
• Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
• Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
• Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
• Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
• Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.

Preferred Systems Experience/Knowledge
• Siemens TIA Portal
• Siemens Step 7 PLC programming software
• Siemens WinAC RTX
• Siemens SINUMERIK 840 D SL System Maintenance and Programming
Siemens SIMOTION software
• Siemens HT8 and HMI Pro software
• Siemens WinCC Advance and WinCC Flexible HMI programming software
• Siemens SCALANCE industrial network switches X408, X308, X208, etc…
• Siemens Simatic IT software suite
• Sunrise AGV software
• Siemens PROFINET Primary Setup Tool
• SICK Safety Scanner Configuration & Diagnostic Software (CDS)
• Kepware or similar OPC software

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EquipToolEngWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 3+ Months
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 10/12/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Engineer

Description:
FPGA Engineer

Location: Irvine, CA



Job Description:

Our Client, an industry leader in the design and manufacture of advanced infrared imaging components and systems, is looking for a highly motivated individual to join our engineering team.



We have an immediate position for an experienced FPGA/SoC engineer. Image/signal processing is prevalent in these designs. The candidate is expected to design an FPGA or SoC from functional specification. As part of the design staff, the candidate will also have input on system level design. Duties will also include integration and testing of firmware, software and systems, as well as manufacturing support of the product line.



Required Skills include:

Experience with ab initio FPGA design (starting from incomplete preliminary specifications)
HDL coding & verification: VHDL for design and System Verilog for verification.
Experience with Xilinx Vivado. Experience with Microsemi Libero is a plus.
Experience with complex system architectures and signal processing algorithms
Experience with hardware bring up, including use of oscilloscopes and logic analyzers
Experience writing engineering documentation, including specification, system design document and test plan
The ability to work well in a fast-paced team environment
Team leadership


Desired Skills include:

Experience with SoC design and development (e.g. Zynq or SmartFusion2)
Ability to write basic software for SoC devices in C/C++
Experience with self-checking test bench design


Education/Experience:

B.S. Computer Science or Electrical Engineering and 12+ years of experience, or M.S. and 10+ years of experience




Candidate must be a U.S. Citizen or Permanent Resident.







____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55069
Job Location: Irvine, CA
Per Diem: Possible
Start Date: ASAP
Input Date: 10/09/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control System Engineer

Description:
Role Description:



We are searching for a talented person to fill a Flight Control Engineer position located here in Moses Lake, WA. The strategic purpose of the Flight Sciences Group, and the Engineering Services Unit, is to provide engineering consulting services related to aircraft performance.



Job Duties and Responsibilities:

Review and support Certification activities.
Certification Plans.
Component Qualification Test Plans.
Similarity Analysis Reports.
Safety and Particular Risk Analysis.
Design Reviews.
Support flight testing activities.
Test Specification Definition.
Test planning and preparation activities.
Pre and Post Flight Briefing Support.
Live monitoring of flight data, typically via telemetry, exceptionally on aircraft.
Post flight data processing, analysis, and drawing conclusions.
Troubleshooting of aircraft snags, root cause determination and appropriate engineering disposition for way forward.
Appropriate disposition of non-conformances, quality escapes etc.
Safety of Flight determination.
Documentation of design problems for long term fix.
Release of engineering documentation for component changes and new installations, ensuring appropriate configuration control.
Generation and review of appropriate limitations documentation.
Flight Test Report Writing.




Requirements
Knowledge/Skills/Abilities

Intermediate knowledge of flight test operations and flight certification.
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Able to work in a progressive, fast-paced environment (work well under pressure).
Strong analytical and troubleshooting skills as well as decision-making skills.
Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
Strong communication skills (oral, written, presentation) with both external and internal customers:
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Uses people relationship and business management skills to make decisions on what and when to communicate with employees.
Able to publicly represent the organization to people who inquire about our company, our mission and our products (straight-forward, believable).
Strong project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office. Proficiency with Microsoft Project and/or other project planning software. Able to quickly learn new software and systems.
Software programming
Education

Four (4) year degree in Engineering (Electrical, Aerospace, Instrumentation, Avionics).
Experience

3-8 years relevant aerospace engineering experience
 
Job Location: Moses Lake, WA
Input Date: 07/17/2018
Last Updated: 12/13/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Claderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls and Simulation Engineer

Description:
Flight Controls and Simulation Engineer

As a Flight Controls and Simulation Engineer, your role will be to design and implement flight control, estimation, and simulation software for an unconventional autonomous vehicle. You will be involved in all stages of development — from dynamic modeling and sub-scale testing, to designing complex control systems, analyzing their robustness and performance, and validating them in simulation and on full-scale aircraft.
You have a passion for self-piloted aircraft. You have an in-depth understanding of fixed-wing and rotorcraft flight dynamics, and of classical and modern flight control techniques. You have designed, analyzed, implemented, and tested complex — yet elegant — multi-level controller architectures, and successfully deployed them in the real world. You have built high-fidelity 6DOF simulations for software-in-the-loop and hardware-in-the-loop testing.
You have a strong mathematical background, with an emphasis on linear algebra, estimation, and optimization. You have used your talents in applied control theory to contribute meaningfully to the design, analysis, and flight testing of one or more operational aircraft. You are familiar with model-based design techniques, and how they are deployed within the constraints of safety-critical embedded systems. You have working familiarity with the principles of software engineering, and have some experience with application level software deployment, testing, and debugging.
As our projects are “out-of-the-box” by design, you will be expected to seek, investigate, and implement creative solutions to challenges and impediments, and skillfully pivot when needed, with minimum loss of momentum. We expect you to do this with equal parts technical intuition and rigorous by-the-book protocol.
To get specific, your responsibilities will be to:
Design and implement flight control, navigation, guidance, estimation, and simulation software for unconventional aircraft
Effectively communicate your designs, analysis, and engineering intent with the rest of the engineering team and partners
Assist the engineering and flight testing team as required

Qualifications:
A Master’s or Doctorate degree in Aeronautical, Mechanical, Electrical, or Software Engineering
At least five years of progressively ambitious experience in the area of vehicle dynamics, controls, and simulation
Expert level knowledge of MATLAB, Simulink, and associated workflows
Experience with C, C++, or another compiled/systems language and Python or another interpreted language
Experience with typical airborne sensors: IMUs, GPS, Air Data, Lidar, etc
A strong mathematical background
Excellent communication skills
An aptitude for working in small teams, with the ability to take a leading role in your area(s) of specialty and readiness to work across disciplines where appropriate


The Structures Company is an AA/EOE.
 
Job Number: 236
Job Location: ORE
Rate: DOE
Per Diem: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 09/06/2018
Last Updated: 12/01/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
GROUND TEST AND AIRCRAFT INSTRUMENTATION TECHNICIAN

Description:
Ground Test and Aircraft Instrumentation Technician

15+ Months Contract Opportunity

Stratford, CT

Work from Engineering Requests, Procedures and Drawings with limited guidance; to Fabricate, Install, Check-out, Diagnose, and Trouble-Shoot Instrumentation Data Acquisition Systems/Sensors in support of Ground and Flight Test Programs.

Requires planning, building and terminating the various cable harnesses required in the Instrumentation System.
Assist in performing System and sensor calibrations.
Working environment consist of the Structural Test Lab, Remote Test Stands ( Engineering & Quality Assurance ) as well as Offsite support to include Aircraft Instrumentation .
Requires a good working knowledge of Instrumentation Sensors, slip rings, and data acquisition systems.
Must possess a strong Mechanical and Electrical background and familiarity with Strain Gages and their circuitry, linear displacement and vibration transducers, measurement systems, instrumentation wiring and documentation.
Ability to perform strain gage installations preferred.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
 
Job Number: 367113
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 08/31/2018
Last Updated: 11/13/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
HVAC Technician

Description:
The HVAC Technician’s primary function is to maintain, install, troubleshoot and repair all types of building equipment and HVAC / Electrical Systems to the customers' satisfaction. Assists other mechanics and technicians occasionally in aspects of building maintenance. Confer with customers to ensure completion of all tasks in a satisfactory manner.

Responsibilities:

> Maintain, install, and troubleshoot electrical equipment and HVAC systems.
> Perform general building and office repairs and office relocation tasks.
> Read and interpret blueprints and building drawings.
> Collect data on various types of equipment.
> Conduct periodic building walk-through to locate problems; perform minor carpentry, drywall and painting.
> Practice good housekeeping and safety standards & Total Quality principles and concepts.

Qualifications:

> 3+ years related experience with a high school diploma and/or related technical education and training.
> Chlorofluorocarbon (CFC) Certification is required
> Ability to troubleshoot and repair electrical systems AND HVAC systems.
> Ability to make general mechanical repairs.
> Good verbal and written communication skills.
> Ability to maintain a valid driver's license.
> Knowledge of HVAC principles and National Electrical Codes (NEC).

Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Office: 508.230.5030 x123
 
Job Number: 018_2018
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 12+/- Months
Start Date: ASAP
Input Date: 09/05/2018
Last Updated: 10/16/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Inspector Aerospace ( Ft Worth , TX ) 8666646

Description:
Inspector Aerospace ( Ft Worth , TX ) 8666646
7 month contract

Pay rate: $20-25/hr W2

• Perform Receiving Inspection of mechanical, electronic assemblies

Minimum Qualifications:
• Ability to interpret mechanical and electrical drawings
• Ability to use measuring tooling such as calipers and tread gauges
• Inspection experience in electronic assemblies
• Inspection experience in requirements and acceptance for cable and wire harness assemblies
• Inspection experience in receiving, in-process, final inspection of mechanical, electronic assemblies.

Preferred Qualification:
• Current IPC-A-610 and/or IPC-A-620 certificates
• FAA Part 145 Repair Station experience
Competencies for success:
• Effective oral and written communication skills
• Ability to work in team environment
• Strong attention to detail work ethic with a task completion mindset
• Team player, hands-on type individual, objective, willing to offer solutions
• Strong time management skills
 
Job Number: 8666646
Job Location: FT Worth, TX
Rate: 25
Per Diem: no
Overtime: yes
Duration: 7 Months
Start Date: ASAP
Input Date: 09/28/2018
Last Updated: 10/12/2018
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Instrument & Controls Engineer

Description:







  • Instrument & controls engineering including front-end planning, I&C quantity and cost estimation, conceptual studies, detailed design, factory acceptance testing (FAT), and construction & commissioning support for EPC projects in Oil & Gas refineries and Chemical industrial facilities. Work in a project team environment under direct supervision of an I&C lead.Burns & McDonnell maintains a strong focus on quality deliverables which are completed on schedule.
    • Prepare instruments and control systems specifications, instruments and instrument valves data sheets, RFQs, technical bid summaries, and purchase recommendations.
    • Conduct review of instrument and control systems vendor drawings and data. Interface with suppliers, clients, other engineering disciplines, and detailers/designers.
    • Participate in the development of P&ID's and equipment/subcontract package specifications.
    • Develop logic diagrams, instrument index, I/O list, cause & effects, and control narratives.
    • Able to support construction and startup & commission activities in the field, when required\
















  • B.Sc. degree in Electrical, Chemical, or Mechanical engineering with Minimum 7 years of I&C related experience
  • EPC project experience is desirable
  • Excellent written & verbal communication and interpersonal skills
  • Ability to lead analysis and resolution of technical problems
  • Must be willing and eligible to obtain or currently hold a valid Transportation Worker Identification Credential (TWIC)
  • This position requires an individual capable of taking variety of project assignments and willing to grow professionally
  • Previous engineering experience within Oil, Gas, Chemical industry is preferred
  • PE license is preferred, ability to get the PE license is required 20% travel is required








 
Job Number: 1810092134
Job Location: KS City, MO
Duration: 6 months
Input Date: 09/11/2018
Last Updated: 01/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f27AAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Intermediate Design Engineer

Description:
Our client, North American’s leading manufacturer of Heavy-Duty Transit buses in the U.S. and Canada, is looking to find the right talent for a new position:

Intermediate Design Engineer
Anniston AL
2018-7022

Join our team as an Intermediate Design Engineer to complete complex design tasks, Bill of Material releases, and projects from concept to implementation in production. This includes all related design activities, calculations, communications, drawings and Engineering Change Notification (ECNs).

Responsibilities:
• Complete design tasks and project assignments which support production activities.
• Coordinate own tasks to ensure schedule and dates are met considering vendor and production lead times. Includes maintaining task status and recording time on each task.
• Create designs that meet customer specifications, Technical Summaries, other contracts documents and ensure designs are within manufacturing abilities.
• Ensure compliance with design criteria and all applicable regulations.
• Complete or initiate controlled testing of components and installations in order to meet contractual obligations, ensure product reliability and verify component fit.
• Complete technical drawings and release documents in accordance with Engineering procedures and ENAs (Notices of Action).
• Provide Engineering support to Production, Quality Assurance, Customer Service Support, and other departments as required.
• Interact with vendors and customers on design related issues. Ensure that, where applicable, there are documents of vendor approval on new installations or applications.
• Check Engineering Documents & ECNs

Qualifications:
• Strong CAD/ Unigraphics, Drafting.
• Strong team work, problem solving and communication skills.
• Able to work independently.

Preferred:
• NX(Unigraphics), Teamcenter, Matlab/Simulink, Solidworks, Fortran, Mathcad, LabVIEW
• Mechanical Design, Experimental Testing/Research,
• Data Processing and/or Analysis

Education and Experience:
• Bachelor’s in Mechanical or Electrical Engineering with 5-10 yrs. experience.
• Or, Master’s degree with 2 or more years of experience.

Moseley Technical Services, Inc. and our client are AA/EEO/Veterans/Disabled Employers.
 
Job Number: 2018-7022
Job Location: Anniston, AL
Rate: Based on experience
Input Date: 10/01/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Aaron Burrows
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Job Opening : Logistics Data/Pub Spec 2 : Ridley Park, PA

Description:
Logistics Data/Pub Spec 2

Location: Ridley Park, PA
Duration: 6+ months

Job Description:
Primary Responsibilities:
Candidate duties as a Logistics Data / Publication Specialist will include (but are not limited to):
- Mechanical, electrical, avionics and support equipment
- Analyze and evaluate engineering source data, vendor data, and customer data in order to design, organize, and develop technical data required to operate and maintain V-22 weapon systems
- Analyze and evaluate impact of engineering changes on technical data
- Develop and implement maintenance tasks, Trouble Shooting Procedures and Maintenance Operational Check (MOC's)
- Read, interpret & analyze engineering data, tool lists, Logistic Support Analysis (LSA) data and supporting databases
- Extensive working knowledge of the Vertical List %u2013 Tiltrotor V-22 systems operation and Navy maintenance concept

Skill Code: GNA-Support Analysis & Tech Pubs
 
Job Number: 18-15600
Job Location: Ridley Park, PA
Per Diem: Yes
Input Date: 10/02/2018
Firm Name: ICONMA LLC
Attention: Sara Rai
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MED / Structural Analyst, Principal / no clearance MA

Description:
Job Title: MED / Structural Analyst, Principal


Work Site Address: Marlborough MA
Job Number: 8689305
Max Pay Rate: 80.00

Start Date: ASAP
End Date: 18 Months
Position Type: Contract


The Structural Analysis Section in the Antenna Systems Department within the Mechanical Engineering Directorate is responsible for performing detailed structural, dynamic, and kinematic analyses on Mechanical Systems and can be called upon to support environmental testing. The candidate will plan and perform structural analysis of mechanical, electronic, and electromechanical systems and interpret structural analysis results. In addition, the candidate may be called upon to plan, witness, and interpret results of structural testing.


Roles and Responsibilities
• 6+ years of experience in structural analysis including finite element modeling working from CAD geometries
• Strong analytical skills in both statics and/or dynamics
• Experience analyzing structures and electronic equipment

Qualifications and Education Requirements
Bachelor of Science Degree in Mechanical Engineering. Coursework in structural analysis, mechanics of materials and numerical methods is preferred

Preferred Skills
• Master of Science in Mechanical Engineering with concentration in structural analysis, mechanics of materials, and numerical methods
• Experience using structural analysis finite element software such as ANSYS or NASTRAN
• Experience analyzing to military standards and requirements
• Experience with CREO (Pro-E) or similar CAD tool
• Strong verbal, written (technical and non-technical) and presentation communication skills
• Effective and team supportive interpersonal communication skills
• Interacts well with team members across various disciplines, including mechanical and electrical engineering, manufacturing, supply chain, and the program office
• Demonstrated task leadership within a team environment
• Ability to effectively work on multiple tasks with changing priorities and interruptions.
• Adept with Microsoft software, such as Word, Excel, Powerpoint
 
Job Number: MB-R8689305
Job Location: Marlborough, MA
Rate: 80/hr max
Per Diem: no
Duration: 18 months
Input Date: 10/11/2018
Last Updated: 10/16/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

MRB Inspector

Description:
PDS is seeking a MRB Inspector for an open position in Greensboro, NC. 

General Summary:

The MRB Inspector will perform inspections and generate discrepancy reports as necessary found to not meet HACI requirements.
 
Duties and Responsibilities:
  1. Perform incoming Inspection utilizing work instruction, marked drawings and electronic worksheets.
  2. Provide visible identification of inspection status.
  3. Maintain inspection records in hard copy QC files and Electronic Databases.
  4. Generate discrepancy reports as necessary for inspection data found to not meet engineering requirements.
  5. Utilize hand measuring instruments, apply inspection methods, and techniques necessary to verify part conformance to engineering requirements including completion of inspection test reports.
  6. Maintain the integrity, identification and security of inspection tools and equipment. Perform periodic calibration in accordance with calibration procedures.
  7. Obtain engineering drawings or marked drawings from engineering needed for inspection.
  8. Repackage and preserve part integrity after inspection.
  9. Maintain Inventory control of rejected materials in MRB Room and bond areas and record material transactions in SAP as necessary to conform with MRB dispositions from the material Review Board
  10. Perform periodic shelf life inspections as specified as may be required.
  11. Assist with 1st article inspection of various aircraft components 

Qualifications
 
Education, Work Experience, Certification and/or Licensure:
1.     Associate Degree (Technical) and/or minimum 4 years quality or manufacturing related experience including mechanical and/or composite, and/or systems assembly.
2.     One year of direct aircraft quality experience potentially may be substituted for each year of college.
 
Knowledge, Skills and Abilities:
1.     Ability to communicate effectively with other personnel.
2.     Strong written and verbal communication skills including presentations.
3.     Proficient in data collection, analysis, and presentation.
4.     Strong computer skills, experienced with MS Outlook, MS Word, and MS Excel, some knowledge of SAP would be helpful. CATIA skills are preferred.
5.     Strong organizational and technical skills.
6.     Basic understanding and use of manufacturing inspection equipment. This includes but not limited to: calipers, micrometers, optical comparators, plug and thread gages and electronic height gages.
7.     Experience in blue print reading including true-positional tolerancing per ANSI/Y-14.5 and interpret ANSI geometric tolerancing.
8.     Familiarity with machining operations including CNC, milling and grinding, etc.
9.     Broad knowledge of quality principles and processes, finishing processes, shop fabrication sequences, structural design and major aircraft components and machining methods and practices. 
10.  Strong knowledge of ISO 9001 and AS9120 standards preferred.
11.  Strong understanding of tooling and production processes preferred.
12.  Experienced in the use, calibration and care of all types of Inspection hand measuring
instruments preferred.
13.  Knowledge of Inspection methods, techniques, and shop practices for the manufacture of castings, sheet metal, machined parts, or fabrications.
14.  Inspection of Electrical harnesses, panel assemblies, or other misc. aircraft components preferred.
15.  Use of material handling equipment and performance safe handling methods. 
 
 
 
Job Number: 1810088371
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 07/09/2018
Last Updated: 01/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Thomas Levitt
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mbeLAAQ&URLSource=cjhunter

Maintenance Mechanic - Level 1 - FL

Description:
Chipton-Ross is seeking a Maintenance Mechanic for an opening in Pinellas Park, FL.

RESPONSIBILITIES
Typical minimums: High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data.
Competently uses computers and other systems to access, maintain and manipulate data.
Interpersonal skills and the ability to interface with all levels, to work in teams or independently and communicate effectively with all co-workers or supervisory staff.
" Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
" Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
" Light janitorial duties expected.
" May perform routine inspections to determine repair and maintenance work necessary.

REQUIREMENTS
" Basic equipment/machines repair (NOT PARTS) and troubleshooting skills, for both electrical and hydraulic systems.
" Carpentry and plumbing experience required.
" Strong troubleshooting/diagnostic skills; proficient with multi-meter
" Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
" Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
" Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
" Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
" Commercial plumbing repairs
" Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)

SHIFT
1st Shift: 6:30am to 5:00pm
4/10 work schedule
 
Job Number: 166611
Job Location: Pinellas Park, FL
Rate: $16 to $22.00 DOE
Duration: 12 Months
Input Date: 03/11/2018
Last Updated: 01/17/2019
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Design Engineer

Description:
The Manufacturing Engineer position is part of the ME Design Engineering team and is responsible for providing Electrical / Avionics technical support in the areas of manufacturing, design, development, and testing.

5 Engineers needed

Duties and Responsibilities:
1. Take complete ownership of assigned A/C area(s).
2. Approve all tooling required for assigned A/C area(s) creating new Tooling Requests, performing Root Cause Analysis on Non-conformances generated by tooling, and identifying work-arounds for tooling deficiencies.
3. Analyzes statistical data including process capability studies, tests capability studies, and through-put rates.
4. Review and approve all Engineering drawings and models for assigned A/C areas, ensuring parts, assemblies, and/ or installations are manufacturable.
5. Manage all Design for Manufacturability Requests for assigned A/C area(s) reviewing/ creating and approving all internal and external submissions.
6. Review and approve all CR’s (Change Requests) to determine positive/ negative impacts to Production coordinating with the various departments within Honda Aircraft Company.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors' degree in Manufacturing Engineer or other related field strongly preferred.
• In lieu of bachelors’ degree, management may elect to consider candidates with a combination of work experience, education, and formal training.
2. 5+ years of directly related work experience within a Manufacturing or Production Engineering design team is required.
3. Previous project engineering and/or project management experience preferred.
4. Six Sigma Certification is a plus.
5. Experience in estimating/ quoting machine/ assembly hours and tooling costs a plus.
6. Experience in supplier selection and management including directing/ addressing supplier concerns from a technical standpoint.

Knowledge, Skills and Abilities:
1. Proven knowledge of wiring harness manufacturing.
2. Proven ability to define standard electrical and avionics methods for installation/testing and the prevention of damage.
3. Proven ability to trouble-shoot defects, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance.
4. Knowledge of AS9102 processes, procedures, and methods a plus.
5. Knowledge of Garmin Avionics Systems a plus.
6. CATIA V5/V6 experience is a plus.
7. Router/ Work Instruction Creation and Maintenance in an advanced ERP/MRP system
• SAP experience is a plus.
• Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s are a plus.
8. 3D Drawing reviews and approvals for Engineering designs and specifications to ensure manufacturability of detail parts, assemblies, and installations.
9. Ability to analyze a variety of engineering data to help determine how to meet company objectives.
 
Job Number: 28-029
Job Location: Greensboro, NC
Rate: Up to $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 06/04/2018
Last Updated: 10/15/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Manufacturing Engineer 4

Description:
PDS Tech, Inc. is seeking a Manufacturing Engineer 4 in Melbourne, FL.
 

Position Summary



We are looking for a Manufacturing Engineer 4 to join our team of qualified, diverse individuals. This position will be located in Melbourne, FL, where technology and teamwork come together. The selected candidate will become part of the Manufacturing Engineering Team at the Melbourne Design Center of Excellence working in a collaborative environment while promoting a positive, proactive and team Environment.



 



Responsibilities



  • Maintains configuration of the aircraft to Engineering requirements
  • Provides guidance to Engineering regarding design concepts and specification requirements to best utilize existing equipment and manufacturing techniques
  • Translates Engineering requirements into a product build package
  • Collaborates with tool design on manufacturing requirements
  • Controls the flow of parts
  • Coordinates make vs. buy part decision
  • Structures Manufacturing Bill of Material (MBOM)
  • Defines sequence of operations and specifies procedures for product build
  • Ensures manufacturing processes and procedures are in compliance with customer requirements
  • Follows manufacturing processes that are applicable to statistical process control and supporting data collection.
  • Uses established manufacturing engineering procedures for the fabrication of tools and equipment used to fabricate products
  • Supports the build and test of product
  • Clears constraints affecting production of aircraft
  • Investigates and initiates corrective actions and improvements in product quality and efficiency
  • Collaborates with tool design to ensure product build is repeatable
  • Oversees the integration of aircraft assembly technologies and processes
  • Provides technical solutions to a wide range of complex and difficult problems
  • Experience integrating products from engineering design to manufacturing floor
  • Provides detailed written instructions that help facilitate product fabrication
  •  Independently determines and develops approach to solutions

Basic Qualifications:



  • 9 Years of Manufacturing Engineering experience with a Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university; 7 years of engineering experience with Master’s Degree in STEM and 4 years of Engineering experience with PHD .
  • 9 years of experience providing technical manufacturing based expertise with a focus on design to cost principles without jeopardizing performance, safety and quality.


 



Preferred Qualifications:



  • Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Systems Engineering, Industrial Engineering, or Electrical Engineering.
  • Experience reviewing and interpreting electrical wire diagrams
  • Experience supporting aircraft hydraulic and/or fuel integration/maintenance
  • Experience supporting enhancement processes that improve production shop floor efficiencies
  • Experience reviewing engineering models during concept design phase to correlate the manufacturing desired final engineering model
  • Good communicator, ability to provide product improvement proposals and present to manufacturing leaders and technical team for approval.
  • Experience providing innovative techniques focused on improving product designs and tooling assemblies or equipment
  • Experience supporting aircraft maintenance and/or flight test operations

 
 
Job Number: 1810088999
Job Location: Melbourne, FL
Duration: 0 months
Input Date: 07/24/2018
Last Updated: 01/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002meFVAAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Manufacturing Planner 3
(U.S. Citizenship Required*)
Mesa, AZ
2018-7074

Join our team to support the Mesa Electrical Center of Excellence by providing electrical (wire harness and electrical panel fabrication) ME planning for both military and commercial platforms.

Responsibilities:
• Develop, implement, and maintain various manufacturing plans, Bills of Materials, work instructions, and illustrations to define and document as-built configuration.
• Develop manufacturing concepts and strategies to support business objectives.
• Develop and integrate suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
• Review and approve supplier data to ensure manufacturing related requirements are met.
• Develop tooling requirements based on manufacturing and engineering requirements.
• Manage tools from initial design to end of use disposition.
• Investigate and resolve manufacturing related issues.
• Perform producibility assessments for part or product designs.
• Provide producibility input to design, manufacturing processes and manufacturing technologies to meet cost and schedules.
• Develop integrated work statements and sequencing of events to support delivery commitments.
• Draft, update, and review processes and procedures to support business and regulatory agency requirements.
• Work under general direction.

Qualification:
• Previous wire harness and electrical panel fabrication is desired.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7074
Job Location: Mesa, AZ
Rate: Based on experience
Duration: 9 Months
Input Date: 10/10/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Andrea Moseley
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner III / Electrical/Wire - (AZ)

Description:
This position will support the Mesa Electrical Center of Excellence and will be responsible for providing electrical (wire harness and electrical panel fabrication) ME planning support for both military and commercial platforms. Previous wire harness and electrical panel fabrication is desired.

Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops manufacturing concepts and strategies to support business objectives. Develops and integrates suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Reviews and approves supplier data to ensure manufacturing related requirements are met. Develops tooling requirements based on manufacturing and engineering requirements. Manages tools from initial design to end of use disposition. Investigates and resolves manufacturing related issues. Performs producibility assessments for part or product designs. Provides producibility input to design, manufacturing processes and manufacturing technologies to meet cost and schedules. Develops integrated work statements and sequencing of events to support delivery commitments. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements.

Prefer an AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: MPaz
Job Location: Mesa, AZ
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 10/10/2018
Last Updated: 12/28/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical / Thermal Engineer - Classified

Description:
Description/Comment: 3 Grade levels see notes to Vendor.

The Test Systems Solutions Center (TSSC) applies a systems approach to provide total test solutions that ensure the quality of Client Missile Systems (RMS) products. The TSSC uses common platforms and processes to design/develop production, depot and engineering test stations. Opportunities include:

•Domestic and international travel
•Innovative rapid prototyping
•Supporting live-fire testing of our products
•Designing, developing or using commercial software for simulation and test equipment environments
•Designing, developing or integrating methods and equipment to effectively test systems.

Job Description:

The candidate will participate on engineering teams performing design, development and integration of RMS test products within the Test Systems Solution Center (TSSC). As such, the candidate will contribute to the development of all stages of test product development for RMS products. The candidate will be responsible for managing mechanical tasks and coordinating with other functional areas to ensure the quality and reliability of TSSC products. Typical work involves the development of both engineering and production test equipment including efforts in the following discipline: Mechanical Engineering.

U.S. Citizenship status is required as this position needs an active U.S. Security Clearance as of day one of employment.

Required Skills:

•Requires a Bachelor of Science degree in Science, Technology, Engineering or Mathematics (STEM)
•This position requires the eligibility to obtain a security clearance. Except in rare circumstances, only U.S. citizens are eligible for a security clearance.
•Technical/engineering experience with emphasis in mechanical design, analysis and integration
•Experience with ProE/CREO
•Working knowledge of and experience with Configuration Management processes, application, and tools (Windchill/cPDM)
•Strong knowledge of geometric dimensioning and tolerance analysis
•Experience in mechanical design, subsystems packaging, thermal and structural analysis
•Ability to apply advanced technical principles
•Multi-discipline design experience in harnessing and CCA packaging


Desired Skills:

•Master of Science degree in Science, Technology, Engineering or Mathematics (STEM)
•ABET is the preferred, although not required, accreditation standard
•Systems engineering experience
•Ability to apply advanced technical principles in the test equipment life cycle
•Customer oriented and driven to meet or exceed expectations
•Excellent communication/presentation skills and the ability to work cohesively in a diverse teaming environment
•Familiar with electrical hardware design tools and methods (DxDesigner and Creo Schematic)
•Ability to lead a small group of engineers
•Experience creating engineering estimates (ROM/BOE)
 
Job Number: 001
Job Location: Tucson, AZ
Rate: open
Per Diem: split
Overtime: possible
Duration: 12 mos +
Start Date: asap
Input Date: 10/10/2018
Firm Name: INTELLISWIFT SOFTWARE INC
Attention: Anna Ashcraft
Address: 39600 BALENTINE DR STE 200
City, State: NEWARK, CA 94560
Phone: 510/370-2600
Website: www.intelliswift.com

Mechanical Assembler

Description:

Description:  



Performs various production assembly operations on components and subassemblies.  Working under limited supervision uses visual aids, lists, and verbal and written instruction to assemble, modify, re-work or re-assemble units.  Assignments are complex.  Receives minimal instruction on routine work and general instructions on new assignments.  May guide work of Assembler I and II.  All work is performed in explosive handling areas or where explosive devices may be present.



  • Follow and meet manufacturing build schedules
  • Manufacture sub-assemblies
  • Knowledge of condition and countability of subassemblies
  • Set-up and operate electrical test equipment
  • Must know and be able to recognize proper tooling for a specific task
  • Must be able to perform mechanical assembly and solder connections
  • Must be able to work from assembly prints, drawings and work orders
  • Train less experienced assemblers as required
  • Other functions as assigned

Qualifications:

  • Three to five years minimum experience as a mechanical assembler
  • Applicants selected will be subject to a government investigation and must meet eligibility requirements for access to classified information.  Process to be initiated immediately after transfer
  • Cross-trained in multiple operations
  • Must be able to read and understand manufacturing procedures
  • Experienced in using a variety of hand tools, measuring devices, microscope
  • General knowledge of calibration systems
  • Must have basic soldering and welding skills
  • Strong interaction skills also required
  • Lift up to 25 lbs.




     
    Job Number: 1810088112
    Job Location: Hollister, CA
    Duration: 3 months
    Input Date: 07/25/2018
    Last Updated: 01/18/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Pam Zack
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mabNAAQ&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer / xDesigner and Creo Schematic - Clearance AZ

    Description:
    163196
    Job Title: Mechanical Engineer

    Work Site Address: Tucson AZ
    Job Number: 8627225

    Start Date: ASAP
    End Date: 6-12 Months
    Position Type: Contract

    The Test Systems Solutions Center (TSSC) applies a systems approach to provide total test solutions that ensure the quality of products. The TSSC uses common platforms and processes to design/develop production, depot and engineering test stations. Opportunities include:

    •Domestic and international travel
    •Innovative rapid prototyping
    •Supporting live-fire testing of our products
    •Designing, developing or using commercial software for simulation and test equipment environments
    •Designing, developing or integrating methods and equipment to effectively test systems.

    The candidate will participate on engineering teams performing design, development and integration of RMS test products within the Test Systems Solution Center (TSSC). As such, the candidate will contribute to the development of all stages of test product development for RMS products. The candidate will be responsible for managing mechanical tasks and coordinating with other functional areas to ensure the quality and reliability of TSSC products. Typical work involves the development of both engineering and production test equipment including efforts in the following discipline: Mechanical Engineering.

    Qualifications and Education Requirements
    •Requires a Bachelor of Science degree in Science, Technology, Engineering or Mathematics (STEM)
    •Technical/engineering experience with emphasis in mechanical design, analysis and integration
    •Experience with ProE/CREO
    •Working knowledge of and experience with Configuration Management processes, application, and tools (Windchill/cPDM)
    •Strong knowledge of geometric dimensioning and tolerance analysis
    •Experience in mechanical design, subsystems packaging, thermal and structural analysis
    •Ability to apply advanced technical principles
    •Multi-discipline design experience in harnessing and CCA packaging

    Preferred Skills
    •Master of Science degree in Science, Technology, Engineering or Mathematics (STEM)
    •ABET is the preferred, although not required, accreditation standard
    •Systems engineering experience
    •Ability to apply advanced technical principles in the test equipment life cycle
    •Customer oriented and driven to meet or exceed expectations
    •Excellent communication/presentation skills and the ability to work cohesively in a diverse teaming environment
    •Familiar with electrical hardware design tools and methods (DxDesigner and Creo Schematic)
    •Ability to lead a small group of engineers
    •Experience creating engineering estimates (ROM/BOE)
     
    Job Number: MB-R8627225S
    Job Location: Tucson, AZ
    Rate: DOE
    Per Diem: no
    Duration: 12 months
    Input Date: 10/16/2018
    Last Updated: 11/12/2018
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer Sr 3

    Description:
    Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

    Mechanical Engineer Sr 3
    (U.S. Citizenship Required*)
    King of Prussia, PA
    2018-7034
    Responsibilities:
    • Perform structural and dynamic design & analysis tasks under supervision of senior engineers within The Hypersonics HCSW Program.
    • Conduct structural analysis of strategic missile systems, hypersonic vehicles, and related components.
    • Specific duties may include performing structural analysis of composite, metallic and electrical components related to missile systems and their related ground equipment.

    Qualification:
    • Required – active Secret clearance. Candidates without active clearance will not be considered.
    • Advanced stress analysis capability using NASTRAN and finite element modeling using NX or equivalent is required.
    • Advanced stress analysis capability using NASTRAN and finite element modeling using NX or equivalent is required.
    • Microsoft Office (Excel, WORD, PowerPoint).
    • Knowledge of and applicable experience with spacecraft or aircraft structural analysis methods, including hand calculation experience for mechanical joints. Excellent verbal and written communication skills are essential.
    Preferred:
    • MATLAB, Fortran, Microsoft Office, AB