Job Search Results

410 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/02/19 Tuesday 10:22AM Pacific Time by ContractJobHunter. )

Listings 1 - 410
Go To My Job Tracker

Expand all descriptions

2419 - AVIONICS SYSTEMS INTEGRATOR - cv, word only

Description:
Be responsible, as an Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Client aircrafts.

Be responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate in the Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Client Flight Test Center in development and certification tests: witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Client program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.

University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent.

At least five (5) years of relevant experience with the design, development, integration and certification of Avionics systems.

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Have a good knowledge of RTCA documents DO-178 and DO-160.

Familiar with part FAR25/525 certification process and with the ARP4754 standard.

Experience with civil aircraft and airworthiness authorities.

Are proficient with the use of Microsoft Office software tools to produce presentation and reports.

Have the ability to work well in a team environment.

Have strong communication skills (written and spoken).
 
Job Number: 2419
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/04/2019
Last Updated: 02/14/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Quality Inspectors

Description:
STS Technical Services is hiring Aerospace Quality Inspectors in Hawthorne, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Job Summary:

To ensure the repair stations operations are conducted in accordance with the pertinent FAA Regulations, CHEP’s Quality Manual/Procedures, Customer Air Carrier Requirements and is designated with final airworthiness determination.

Major/Key Accountabilities:

The Chief Inspector will have the final airworthiness authority for the release, as airworthy, of the units the repair station is rated to repair and maintain
Responsible for ensuring all articles delivered to and maintained by the repair station are properly recorded and staged from receipt to delivery in their airworthy/serviceable condition
Managing and delegating to the repair stations inspection staff ensuring the quality and production needs are maintained
Perform, and have oversight of inspection personnel/activity, including Preliminary, Hidden Damage, In-Progress and Final inspections/RTS of aircraft articles processed by the Repair Station and assuring proper recording of results
Ensure compliance with pertinent FAA regulations, manufacturer’s technical data/approved supplements, RSM/QCM and customer requirements
Report all quality related issues to the QA Manager as soon as the Facility Manager is advised and ensure corrective actions are implemented
Confirm that all equipment being maintained by the repair station is on the Capabilities List, the proper data is available and in use, the staff is properly trained and all records of work/release are complete/accurate
Perform duties delegated by Quality Assurance Manager
Directly responsible for the compliance with the FAA Approved training program manual; including indoctrination, initial, recurrent, ongoing, semi-annual, and specialized training
Ensure any applicable Airworthiness Directive are posted and are being used and verify compliance with all other supplements, approvals, requirements
Submit reports of defect or un-airworthy condition to the “Service Difficulty Reports”
Assume all duties and responsibilities detailed in the RSQCM to include; calibration program, shelf life program, internal auditing, BER/scrap, work turn over, suspected unapproved parts, salvage parts program and incoming goods
Performing semi-annual internal audit of the repair station and any approved contractors
Coordinate with station manager inspection requirements
Ensure and assist in all areas of the Safety Program and Zero Harm Program to ensure that they are fully enforced and by all CHEP employees
Provide feedback/suggestion to improve customer satisfaction
Communicate with customers and regulatory agencies during audits or visits
Ensure system security of our FAA approved electronic recordkeeping system regarding their area/s of responsibility
Maintain safe and clean work environment

Measures:

Overseeing the quality of products in accordance with monthly budgeted production goals
Maintaining quality standard in accordance with the regulations, customer requirements and internal procedure
Establishing a quality and compliance system which will result in no major audit finding
Equipment rejection rates shall be at 98% or higher
Maintaining positive MTTR
Contributing to positive MOP by controlling wastes
Enforcing the CHEP Zero Harm Culture and goals
Authority/ Decision Making:
According to the company matrix

Qualifications:

Appropriately certificated under Part 65 (A&P or FAA Repairman)
A&P License REQUIRED
Ability to work in a high activity/fast paced environment while managing associated stress
Possesses excellent organizational skills and ability to work independently
Organize responsibilities of the inspection staff and delegate duties to properly qualified inspection personnel
Effectively execute training in accordance with the Approved Training Program and internal requirements
Ability to make quality decisions and effectively solve problems
Strong verbal and written communication skills, including the ability to facilitate meetings and effectively lead groups
Ability to build and maintain effective working relationships with all levels of management and staff
Ability to lift, pull, and push in excess of 65 lbs
Must be able to read, write and understand the English language
Confident personality with the ability to interface/communicate with the authorities and customers
Experience in performing Audits
Strong knowledge of FAA regulations and Part 145 requirements
Competent in reading and interpreting manuals, drawings, policies
Good communication and punctuation skills
Computer literacy and familiar with Microsoft office
Ability to learn new software programs and systems

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 43601
Job Location: Hawthorne, CA
Duration: Contract
Input Date: 11/08/2018
Last Updated: 11/15/2018
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Data Entry Operators

Description:
STS Technical Services is currently hiring Aircraft Data Entry Operators for open positions in Denver, Colorado.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Job Summary:

The Aircraft Data Entry Operators will oversee all aspects of Records retention, maintaining accurate records for each aircraft and components. Audit online records and approved maintenance record database daily, ensuring all maintenance entries are accounted for and accurate. Organizes and reviews all aircraft data relating to the TCI, aircraft flight times, aircraft log pages, and maintenance activities that have been performed on the aircraft to ensure proper airworthiness in accordance with CFRs.

Job Duties:

Ensure the accuracy and completeness of all records; update databases for lease return and induction activities; Scan or upload all documentation to the ERRP.
Read & interpret technical data, to be input in the maintenance database, as required.
Ensure all maintenance records received into Aircraft Records are entered into approved maintenance record database daily.
Scan, Audit, and index all documents into the ERRP to comply with the FARs.
Audit the documentation for accuracy and completion as outlined in the GMM & FARs.
Accurately track all serialized components on the aircraft.
Record hours/cycles daily; correct aircraft hours and cycles on parts tags, EOs, ADs, FCDs, and A-Checks for accurate data input into the Maintenance database.
Enter component removal and replacement in the maintenance database; ensure that part numbers and serial numbers are accurate.
Perform other duties as required or directed from supervisor of the department.

Qualifications:

High school diploma or GED & the ability to interpret technical data.
Four years of aircraft related work & familiarity with Aviation terminology.
Effective oral and written communication skills.
Must demonstrate behavior that portrays the company core values of Safety, Respect, Trust, Collaboration, Value, and Passion while communicating with personnel and acting on behalf of the company.
Preferred - Experience with aircraft MRO systems & Experience with electronic records management systems.
Preferred - Previous aircraft records experience.

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 35489
Job Location: Denver, CO
Duration: Contract
Input Date: 11/08/2018
Last Updated: 11/15/2018
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Structure Mechanic (25) - OK

Description:
Chipton-Ross is seeking 25 Aircraft Structure Mechanics for an opening in Tulsa, OK.

RESPONSIBILITIES:
Perform structural assembly and fastener installation of components and assemblies, sealing in confined spaces. Assure quality conformance to company/customer requirements and specifications. Responsible for assuring final quality acceptance of installations, structures, components and controls.


-Perform a variety of fastener installation and structural assemble operations. -Apply sealing compounds, mixes, resins, protective coatings and touch-up paint. -Operate automated riveting machines. - Clean tanks and other surfaces by removing oils grease, litter, and other contaminants. -Perform fitting and rework operations. - Make minor adjustments to equipment such as changing sets, punches, shims and dies. -Prepare and maintain necessary documentation and records. -Adhere to all applicable safety and operational procedures and directives. -Assist and instruct other assemblers. -Bring to the attention of supervision all malfunctions, defects and damages of equipment, material and product. -Keep work area clean and orderly. -May be required to perform other duties as required.

REQUIREMENTS:
-Must have a minimum of 5 years' experience in Aircraft Structural Assembly in an Aircraft Manufacturing environment. - Must be able to work accurately from engineering drawings, blueprints, specifications, quality procedures and other written and oral work instructions. -Must be able to use hand tools, power tools, precision measuring instruments, and basic shop equipment. -Must be able to lift, climb, grasp, hold, stand, bend, and stoop. Preferred candidates will also be able to perform basic administrative skills needed to prepare and maintain documentation, records and specifications and use computers to access electronic work instructions and enter data to document completion of work. Must be willing to work any shift.

EDUCATION:
Equivalent to four (4) years High School plus vocational or similar training, including shop math to interpret and work from engineering drawings, manufacturing specifications and procedures, work orders and verbal instructions.



 
Job Number: 169641
Job Location: Tulsa, OK
Rate: Up to $30.00 DOE
Duration: Until April 2019
Input Date: 08/22/2018
Last Updated: 02/19/2019
Firm Name: CHIPTON ROSS
Attention: Chris Conaway
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cconaway@chiptonross.com
Website: www.chiptonross.com

Avionics Engineer

Description:
JOB SUMMARY:
Principal responsibilities include design and integration of aircraft avionics and electrical systems for modifications.
JOB RESPONSIBILITIES:
• Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD, Mentor Graphics and/or IAI HarnesSys)
• Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft
• Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents
• Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc.
• Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.
• Assist with the development, design, testing and certification documentation for new or modified printed circuit board modules for aircraft
EDUCATION/ EXPERIENCE:
• At least 2 years of related experience
• Bachelor’s Degree (or equivalent industry experience) in: Electrical Engineering, Computer Engineering or Electrical/Electronic Engineering Technology, or related technical degree.
• Electronic drafting experience with CATIA-CADAM Drafting (CCD), Mentor Graphics and/or IAI HarnesSys desired.
• C/C++ and assembly programming experience or coursework desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus.
• Experience with avionics and electrical system design to the requirements of CFR 14 Parts 23 & 25 is desired.
• Experience with 3D modeling and drafting using CATIA V5 file based/Enovia and/or CATIA V6/Enovia is beneficial.
 
Job Number: 87958
Job Location: multiple
Rate: open
Per Diem: possible
Overtime: possible
Duration: Long Term
Start Date: ASAP
Input Date: 07/25/2018
Last Updated: 02/19/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
C4I and Cybersecurity Engineering Specialist

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

C4I and Cybersecurity Engineering Specialist
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-7285

Responsibilities:
• Analyze requirements for system, subsystem, and LRU-level electronics in C4I/EW and related systems, with a focus on cybersecurity
• Develop subsystem-level hardware and software functional design and interfaces
• Write system/subsystem specifications for vehicle electronics
• Develop and document verification plans and procedures
• Perform/support integration/verification of C4I/EW subsystems in the laboratory and on combat vehicles
• Analyze, produce, and compile artifacts for Risk Management Framework (RMF) and/or cross-domain approval
• Analyze, produce, and compile artifacts for program protection
• Provide periodic reports to management
• Participate in proposal development and project technical planning

Qualifications:
• Required – able to obtain and maintain a Secret clearance; current clearance preferred
• CISSP desired, preferably with a concentration in ISSEP
• Experience with C4I and Cybersecurity engineering including one or more of the following:
o Designing secure, tactical systems/networks
o DIACAP/RMF preferred
o Ethical hacking, penetration testing, and data fuzzing tools
o Program protection, system security engineering, and critical function analysis
o Systems engineering with military vehicle electronics
o Military radios, intercoms, mission command software, navigation, and electronic warfare
o Radio frequency (RF) and computer/communications networking analysis/design
o Network centric warfare / operations
o Network & RF modeling and simulation (e.g., OPNET Modeler, STK, EMIT, Savant)
o Configuring network switches and routers
• Familiarity with Microsoft Office software (Word, Excel, PowerPoint, Visio) required
• Proficiency with laboratory and test/analysis equipment preferred
• Able to travel (mostly domestic, some international) up to 15%
• Must satisfy Anthropometric Size Restrictions for access to military vehicles and be able to climb on vehicles and pass through hatches
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor of Science in Computer Engineering or Electrical Engineering required, Master’s desirable; degrees in Mathematics, Computer Science, or Cybersecurity will be considered with relevant engineering experience
• Minimum of at least 10 years’ experience preferred.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7285
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 11/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Kinleney Riley
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
C4I/EW Senior Systems Engineer

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

C4I/EW Senior Systems Engineer
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-7286

Responsibilities:
• Perform requirements analysis for system, subsystem, and LRU-level electronics in C4I/EW and related systems
• Develop subsystem-level hardware and software functional design and interfaces
• Write system/subsystem specifications for vehicle electronics
• Develop and document verification plans and procedures
• Perform/support integration/verification of military electronics in the laboratory and on combat vehicles
• Provide periodic reports to management
• Participate in proposal development and project technical planning

Qualifications:
• Required – able to obtain and maintain Secret clearance; current clearance preferred
• Experience in C4I/EW Systems Engineering including one or more of the following:
o Military radios and intercoms
o Radio frequency (RF) and computer/communications networking analysis/design
o Mission Command software
o GPS and navigation devices
o Electronic warfare systems / components
o Intelligence (SIGINT, ELINT, COMINT, etc.)
o Military vehicle electronics
• Familiarity with Microsoft Office software (Word, Excel, PowerPoint, Visio) required
• Proficiency with laboratory and test/analysis equipment preferred
• Able to travel (mostly domestic, some international) up to 15%
• Must satisfy Anthropometric Size Restrictions for access to military vehicles and be able to climb on vehicles and pass through hatches
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor of Science in Computer Engineering or Electrical Engineering required, Master’s desirable; degrees in Computer Science, Mathematics, or other Engineering will be considered with relevant engineering experience
• Minimum of 5 years’ experience preferred

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7286
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 11/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Kinleney Riley
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Operator

Description:
Must be proficient in AutoCAD (version 2014 or higher). Must be proficient using Windows based software and MS office 2000 or higher (Excel, Word, PowerPoint, etc.). Must have strong organizational skills. Someone with a little bit of experience in the construction field



PREFERRED.

  • More along with electrical or mechanical construction, not electronic board layouts.

  • Willing to look at candidates recently graduated from school but has some business experience as a CAD person.

  • High school or equivalent education required.

  • Resumes need to be well constructed, accurate, spell checked, etc. which shows attention to detail with the desire to do a good job. It shows that the candidates care about what they put their name on.

  • Receive project assignments from Design Team member.

  • Under supervision, prepare construction drawings required to support the installation of electronic special systems (fire alarm, security, access control, and other low voltage specialty systems)

  • Electronic systems drawings will typically consist of items such as floor plan layouts, riser diagrams, electrical interconnections drawings and installation terminations.

  • ¿Prepare submittal documentation (i.e.,. data sheets, battery calculations) Maintain project drawing files, and associated records and documentation tracking & maintaining as-built drawings Perform other duties as assigned.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 18-43362
Job Location: Irving, TX
Rate: 22.46USD/Hour
Per Diem: --
Overtime: --
Duration: 2018-08-05 00:00:00.0
Start Date: 2018-06-25 00:00:00.0
Input Date: 10/11/2018
Last Updated: 11/29/2018
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist

Description:
CNC Machinist applies advanced skills in administration and use of procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. 2. Independently perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. 3. Set up and operate necessary test equipment in accordance with required documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. 4. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required maintenance data to ensure conformity requirements are met. 5. Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. 6. Demonstrate expertise and efficiency in repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. 7. Demonstrate expertise in use, maintenance, and calibration requirements of precision measuring and inspection tools such as, but not limited to, micrometers, calipers, bore gauges, multimeters, watt meters, spectrum analyzers, and borescopes. 8. Demonstrate expertise in the flow of materials and work order processes within the repair station. 9. Maintain and utilize all required paperwork in accordance with FAA Repair Station requirements. 10. Maintain a clean and orderly work area. 11. Comply with all company and legislative environmental health and safety regulations. Must be proficient in the setup and operation of 3-5 axis CNC Mills. Must be able to setup and operate conventional mills and lathes and use related precision measuring tools to inspect machined detail components to blueprints / 3D models.


CNC Machinist Lay-out, remove, fabricate and/or install major and minor repairs to flight controls and other secondary structure components using honeycomb core sandwich construction techniques, composite repair techniques, test bench procedures, hydraulic press procedures, and servicing carts. 2. Fabricate and repair sheet metal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. 3. Remove & install APUs and perform all required APU maintenance for all aircraft models 4. Perform repairs to electronic assemblies and subassemblies by removing and replacing circuit components, either through hole or surface mount, using acceptable soldering and circuit repair techniques. 5. Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. 6. Assist with training and instructing of other Acft Compo Repair I and II Techs. 7. Perform other duties as assigned.
HS diploma or GED. A&P license, FCC license, or NCATT cert preferred. Able to read/interpret blueprints, engrg docs and use/read precision measuring tools. Proficient in the operation of all tools & equip in the dept. Basic understanding of shop math. 4 yrs. experience in one of the following or other related expr: Sheetmetal, hydraulic overhaul, avionics/elect compo repair. Accredited schooling in electronics and elect sys may offset some experience reqmts. APU removal, install, service.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/04/2018
Last Updated: 12/28/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chief Aviation Inspectors

Description:
STS Technical Services is Hiring Chief Aviation Inspectors in Inwood, New York.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Job Purpose:
To ensure the repair stations operations are conducted in accordance with the pertinent FAA Regulations, client’s Quality Manual/Procedures, Customer Air Carrier Requirements and is designated with final airworthiness determination.

Job Duties:
The Chief Inspector will have the final airworthiness authority for the release, as airworthy, of the units the repair station is rated to repair and maintain
Responsible for ensuring all articles delivered to and maintained by the repair station are properly recorded and staged from receipt to delivery in their airworthy/serviceable condition
Managing and delegating to the repair stations inspection staff ensuring the quality and production needs are maintained
Perform, and have oversight of inspection personnel/activity, including Preliminary, Hidden Damage, In-Progress and Final inspections/RTS of aircraft articles processed by the Repair Station and assuring proper recording of results
Ensure compliance with pertinent FAA regulations, manufacturer’s technical data/approved supplements, RSM/QCM and customer requirements
Report all quality related issues to the QA Manager as soon as the Facility Manager is advised and ensure corrective actions are implemented
Confirm that all equipment being maintained by the repair station is on the Capabilities List, the proper data is available and in use, the staff is properly trained and all records of work/release are complete/accurate
Perform duties delegated by Quality Assurance Manager
Directly responsible for the compliance with the FAA Approved training program manual; including indoctrination, initial, recurrent, ongoing, semi-annual, and specialized training
Ensure any applicable Airworthiness Directive are posted and are being used and verify compliance with all other supplements, approvals, requirements
Submit reports of defect or un-airworthy condition to the “Service Difficulty Reports”
Assume all duties and responsibilities detailed in the RSQCM to include; calibration program, shelf life program, internal auditing, BER/scrap, work turn over, suspected unapproved parts, salvage parts program and incoming goods
Performing semi-annual internal audit of the repair station and any approved contractors
Coordinate with station manager inspection requirements
Ensure and assist in all areas of the Safety Program and Zero Harm Program to ensure that they are fully enforced and by all client employees
Provide feedback/suggestion to improve customer satisfaction
Communicate with customers and regulatory agencies during audits or visits
Ensure system security of our FAA approved electronic recordkeeping system regarding their area/s of responsibility
Maintain safe and clean work environment
Overseeing the quality of products in accordance with monthly budgeted production goals
Maintaining quality standard in accordance with the regulations, customer requirements and internal procedure
Establishing a quality and compliance system which will result in no major audit finding;
Equipment rejection rates shall be at 98% or higher
Maintaining positive MTTR
Contributing to positive MOP by controlling wastes
Enforcing the client Zero Harm Culture and goals

Qualifications:
2+ years’ experience as a lead inspector or manager in related aviation field
5 years’ aviation related industry experience
Confident personality with the ability to interface/communicate with the authorities and customers
Experience in performing Audits
Strong knowledge of FAA regulations and Part 145 requirements
Competent in reading and interpreting manuals, drawings, policies
Good communication and punctuation skills
Computer literacy and familiar with Microsoft office
Ability to learn new software programs and systems
Appropriately certificated under Part 65 (A&P or FAA Repairman)
Ability to work in a high activity/fast paced environment while managing associated stress
Possesses excellent organizational skills and ability to work independently
Organize responsibilities of the inspection staff and delegate duties to properly qualified inspection personnel
Effectively execute training in accordance with the Approved Training Program and internal requirements
Ability to make quality decisions and effectively solve problems
Strong verbal and written communication skills, including the ability to facilitate meetings and effectively lead groups
Ability to build and maintain effective working relationships with all levels of management and staff
Ability to lift, pull, and push in excess of 65 lbs
Must be able to read, write and understand the English language
Part 65 A&P or Repairman Certificate

Benefits:
STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 44529
Job Location: Inwood, NY
Duration: Contract
Input Date: 11/08/2018
Last Updated: 11/15/2018
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Circuit Board Designer - Cadence Allegro (320)

Description:
*This is a full time, 1 year contract position, located in Hudson, NH*



We are looking for an Electronic Designer that has the ability to create 5+ layer layouts of printed electronic circuit boards using Cadence Allegro and Cadence Concept.



Candidate will create complete deliverable fabrication package and fabricate both the bare board and assembly, enter design rules into Cadence constraint manager, prepare layouts using IPC-2221, modify and create new to schematic diagrams with Schematic Capture, Cadence Concept HDL5, working with ECOs and Oracle PDM tools to direct draftspeople to make changes into drawings.



Required:
*15+ years’ experience in Printed Circuit Board layout, most of which, using Cadence Allegro 17.2 (16.6 may also be acceptable)
*Good knowledge of Cadence Constraint Manager and Concept HDL 5.
*Familiar with IAW IPC-2221 standards, ECOs, BOMs, and PDM tools
*Knowledge of Signal Integrity and Designs
*AS degree in engineering technology, drafting or equivalent.
Pluses:
*BSEE or BSME
 
Job Number: 320
Job Location: Hudson, NH
Input Date: 01/10/2019
Last Updated: 01/22/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Complaint Investigation Engineer - IN

Description:
Chipton Ross is seeking a Complaint Investigation Engineer in Batesville, IN.

Job Summary:
Analyze design related complaints, evaluate product (component) returns, complete root cause analysis on returns, assess risk documentation, and write a technical investigation report.

Responsibilities:
- Analyze design related complaint codes (read the complaint codes and evaluate, research and combine like items)
- Complete engineering evaluation and root cause analysis on failed parts
- Complete engineering investigations, including risk management
- Write a technical report for the investigation
- Applies technical competencies in somewhat difficult situations
- Identifies technical problems and provides root cause analysis
- Shares technical knowledge with others in the team
- Generates detailed, high quality technical documentation
- Completes assigned tasks on time with minimal supervision
- Uses existing tools and best practices to report and track process metrics
- Ability to effectively communicate and interact with customers, team members, and various technical disciplines
o Informs others proactively about developments or issues that affect their work, and their ability to meet commitments
o Uses collaborative communication style to negotiate win-win outcomes
o Tends to be seen as original and value-added in brainstorming sessions
o Understand detail design drawings, schematics, specifications and bills of material (BOM's)
- This role does not have supervisory responsibility

Requirements:
- BS Degree in Engineering
- 2+ years of engineering experience, or comparable experience
- Basic knowledge of metals/plastics/welding/electronics/assembly
- Strong organizational and communication skills
- Proficient problem-solving skills
- Strong interpersonal skills with the ability to work collaboratively with others in a team environment
- Working knowledge of Microsoft Office (excel, word, databases)
- Experience in the medical device industry is preferred
- Experience working in cross functional teams consisting of discipline specific engineers, or comparable experience

Education:
- BS Degree in Engineering

Schedule:
- Full time

 
Job Number: 174040
Job Location: Batesville, IN
Rate: $29.41 to $44.12 DOE
Duration: 10 months
Input Date: 09/21/2018
Last Updated: 02/19/2019
Firm Name: CHIPTON ROSS
Attention: Billy James
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bjames@chiptonross.com
Website: www.chiptonross.com

Cost Analyst

Description:
PDS TECH INC. is seeking Cost Analyst located in Menlo Park,CA.
 

Summary:
We are looking for a Cost Analyst with knowledge in supply chain, operations, finance and accounting to support the Operations team for timely and accurate review of all aspects of product cost analysis, including material cost, spending and production performance data. The role is expected to support the team in the following functions:



  • Collect cost information from each manufacturing partner, organize them in a systematical way and drive business insight.
  • Analyze the cost information from our manufacturing partners as well as general market information for better cost management strategy.
  • Facilitate potential business transactions including rebate, buy/sell and consignment.
  • Track spending at each partner and other key performance metrics.

Qualification



  • 3 or more years of experience in supply chain management, finance or accounting in consumer electronics industry
  • Solid/ Advanced knowledge of MS office, especially Excel and PowerPoint
  • Experience in Agile or other PLM system is preferred
  • Well organized and attention to detail
  • Excellent communication skills and ability to work with multiple internal teams





  • BS/ BA in Finance, Accounting or Operations

Languages:
English Read Write Speak

Attachments: 


p
p
spacer


p
ppcollapse Skills and Experience
pp
p

Skills:

Required



  • FINANCE
  • MS OFFICE
  • POWERPOINT
  • COST MANAGEMENT
  • OPERATIONS


Additional



  • SUPPLY CHAIN
  • SUPPLY CHAIN MANAGEMENT
  • CONTRACT MANUFACTURING
  • MANUFACTURING OPERATIONS
  • MICROSOFT EXCEL
  • MICROSOFT OFFICE
  • MICROSOFT POWERPOINT
  • OUTSOURCED MANUFACTURING

Languages:English( Speak, Read, Write )
Minimum Degree Required:Bachelor's Degree



 
Job Number: 1810084822
Job Location: Menlo Park, CA
Duration: 6 months
Input Date: 04/25/2018
Last Updated: 02/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Eren Polanco
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mNjaAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer 3
(U.S. Citizenship Required*)
Everett, WA
2018-7191

Responsibilities:
• Work with customers to develop and document complex electronic & electrical system requirements.
• Analyze and translate requirements into system, hardware & software designs and interface specifications.
• Test and validate to ensure system designs meet operational and functional requirements.
• Monitor supplier performance to ensure system integration and compliance with requirements.
• Solve problems concerning, and provide other support of, fielded hardware & software over the entire product lifecycle.
• Research specific technology advances for potential application to company business needs.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
• Degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7191
Job Location: Everett, WA
Rate: Based on experience
Duration: 6 Months
Input Date: 11/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Gregory Schaal
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer 3
(U.S. Citizenship Required*)
Seattle, WA
2018-7190

Responsibilities:
• Work with customers to develop and document complex electronic & electrical system requirements.
• Analyze and translate requirements into system, hardware & software designs and interface specifications.
• Test and validate to ensure system designs meet operational and functional requirements.
• Monitor supplier performance to ensure system integration and compliance with requirements.
• Solve problems concerning, and provide other support of, fielded hardware & software over the entire product lifecycle.
• Research specific technology advances for potential application to company business needs.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
• Degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7190
Job Location: Seattle, WA
Rate: Based on experience
Duration: 6 Months
Input Date: 11/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Gregory Schaal
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Design and Analysis Engineer 4 - (10) - OK - C

Description:
Chipton-Ross is seeking 10 Design and Analysis Engineer 4 located in Oklahoma City, OK

RESPONSIBILITIES:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

WORK HOURS:
Full-Time/First Shift
8 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 174543
Job Location: OK City, OK
Rate: $DOE
Duration: 6 MONTHS
Input Date: 10/16/2018
Last Updated: 02/19/2019
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 5 (3) - OK - O/M

Description:
Chipton-Ross is seeking3 Design & Analysis Engineer 5's located in Oklahoma City, OK

RESPONSIBILITIES:
Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

EDUCATION:
Accredited Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 174544
Job Location: OK City, OK
Rate: $DOE
Duration: 6 Months
Input Date: 10/16/2018
Last Updated: 02/19/2019
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

Digital Design Engineer

Description:
Job Description:


  • Client is seeking an individual with specialized skills in digital design tools with a firm background in computer operating systems and processes necessary to develop Client and unique digital circuit blocks and apply advanced algorithms in next generation silicon processes.

  • Primary job functions will include system administration, installation, and maintenance of an advanced circuit design environment consisting of commercial- and government- developed electronic design software.

  • Other duties may include supporting analog and RF design, developing standard cell libraries, and testing fabricated chipsets.

  • The selected candidate will represent our Client and DoD customers in outside discussions and technical forums.

  • This position will require some travel and require a security clearance.




Required Skills & Experience


  • A BS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required.

  • The applicant must be familiar with the Red Hat enterprise operating system or comparable Linux distributions, installation, maintenance, port security, backup, and shell scripting.

  • Familiarity with installation and maintenance of the advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is required.

  • The applicant must be capable of debugging and troubleshooting electronic design tool installation/maintenance and interaction with 3rd party tools and process design kits.

  • Experience in deriving verification test benches from detailed specifications is required.

  • Familiarity with at least one (1) commercial scripting programming language such as

  • PERL or Python is required.




Desired Skills and Experience

Additional experience in digital circuit design is desired, including: Verilog/VHDL behavioral modeling, Digital IC design for manufacturing (JTAG insertion, test vector generation, Built-In Self-Test), an understanding of physical design issues including layout, familiarity with memory compilers, Cadence Skill code development, and fundamentals of Process Design Kits (PDKs).



Special Requirements/ Certifications:

Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs
 
Job Number: 18-12267
Job Location: Dayton, OH
Rate: 0.0USD/Hour
Per Diem: SPLIT
Overtime: Possible
Duration: 2018-08-10 00:00:00.0
Start Date: 2018-05-13 00:00:00.0
Input Date: 03/27/2018
Last Updated: 02/19/2019
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

ELECTRONICS DESIGN ENGINEER

Description:
JSG is seeking an Electronics Design Engineer for our Aerospace Client in Glendale, CA.
LOCAL CANDIDATES ONLY - Direct Hire

Work as part of a world-class, multi-disciplinary team to develop ruggedized electronic products incorporating embedded microprocessors, and transition them into production for aerospace, military, sub-sea, and other harsh-environment applications.

Job Description:

Work from Marketing Requirements to develop electronic hardware designs incorporating embedded microprocessors responsive to the requirements, including
Product design architecture
parts and vendor selection
detailed hardware design and schematic generation and capture in PADS
preliminary parts layout for fit checks
work with PCB layout design team and PCBA vendors
work with mechanical design team
develop firmware/scripts/applications to test hardware
Debug and troubleshoot new designs
Execute functional verification of electrical subsystems
Support manufacturing for all designs including microprocessors, including
Work with Test Engineering to develop appropriate acceptance test stations in production
Troubleshoot problems in production and at customer sites
Work with Product Marketing and Business Development to prepare responses to customer Requests for Proposals
Customer specification review
Preliminary design concepts
Estimate engineering effort to execute designs and firmware/software
Preliminary bill of materials and costing
Basic Qualifications

Bachelor’s degree in Electrical Engineering, Computer Science, related filed or equivalent experience
10+ years overall experience in hardware design
High level of expertise in embedded microprocessor design and programming (C/C++, etc.)
Experience with Ethernet product design (10/100/1000BASE-T interfaces, PHYs, unmanaged switches.) 10GBASE-T interface experience a plus.
Skilled in the design and use of common I/O protocols (I2C, USB, JTAG, Ethernet).
High level of experience with hands-on troubleshooting and turn-on of new circuitry, including test bench equipment such as multi meters, DAQs, spectrum analyzers, JTAG and ICE probes, software, oscilloscopes, etc.
Experience in qualifying embedded systems to MIL-STD-810 MIL-STD-461 or IEC equivalents
Experience in failure analysis and troubleshooting skills in a production and R&D environment
Experience with prototyping solutions and bench testing methodology
Experience with test automation with background in scripting
Excellent technical writing skills and experience writing hardware, software, and interface requirements along with qualification test plans and procedures.
Able to handle ITAR data. Must be US Person or have Green Card.

Preferred Qualifications

Experience with military systems with battery charging, embedded protocol transceivers, microprocessor and FPGA-based systems
Experience with Ethernet product design and testing (Ethernet switch ICs, fiber-optic media converters, etc.)
Experience with digital video systems testing
HD-SDI, 3G-SDI, HDMI, DVI, DisplayPort
 
Job Number: 368920
Job Location: Glendale, CA.
Per Diem: No
Overtime: possible
Duration: Direct
Start Date: ASAP
Input Date: 10/03/2018
Last Updated: 02/15/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

Electrical / Electronic Systems Design & Analysis Engineer III - (Everett & Seattle)

Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: EEWA
Job Location: Seattle, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 02/12/2019
Last Updated: 02/18/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: vibhas.sadhu@acsicorp.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Systems Design & Analysis Engineer IV & V - (OK)

Description:
Several openings in Oklahoma City, OK.

Active Secret Clearance, NOT required to start.

Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 10/16/2018
Last Updated: 01/25/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Systems Design & Analysis Engineer IV & V - (OK)

Description:
Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in electrical engineering.

Qualification:
─ Electrical Power System >8 years (Required)

Experience:
─ Ability to develop work packages and design concept from statement of work and system requirements.
─ One line, three line AC & DC power architecture and power distributions.
─ Power system load flows, AC 1ph/3ph, and DC load analysis.
─ Equipment proper breaker sizing and wire sizing/voltage drop analysis.

Knowledge:
─ Electrical equipment such as integrate drive generator, auxiliary power unit, generator control unit, current transformer, generator breaker/relays, frequency 400Hz/60Hz converter, voltage AC/DC converters, and other protective devices.
─ Mil-Std-704; DO-160 power quality and FAR 25 FAA Generating Power System.
─ Hand-on test equipment is preferred.
─ Capability to provide leadership, guidance to less experienced engineer team members.
 
Job Number: EEok
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 09/06/2018
Last Updated: 11/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Electrical Design Engineer
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-7199

Responsibilities:
• Design, develop, and support circuit design, component selection, procurement, and prototype hardware debug and builds
• Construct and design new control solution(s), familiarity of design concepts and approaches to motion control and fire control applications
• Design and develop Electrical Components, LRUs and subsystems for processor, I/O, and display products
• Support concept to production delivery including design, debug, test, and qualification of design articles
• Review and develop H/W and S/W requirement documents and test plans
• Perform system, subsystem, & LRU-level requirements analysis as relates to weapon motion control, identifying interfaces & required functionality
• Perform error budget analyses expertise to support fire control integration
• Understand and develop vehicle & subsystem-level integration and test plans
• About 5% travel time

Qualifications:
• Broad based knowledge of electrical systems, system/subsystem, hardware, and software requirements
• Demonstrated experience with integrating electrical / electronic components and associated software/hardware into ground combat vehicles
• Experience with network-based vehicle (combat or automotive) architectures
• Experience troubleshooting Vetronics systems required
• Experience with link-based (e.g., CAN) diagnostic systems required
• Experience with J1939 CAN protocol
• Experience with SIL and vehicle-based Vetronics testing
• Familiar with TCP/IP and UDP protocol
• Able to use engineering development and test tools
• Strong interpersonal skills and ability to work with interdisciplinary teams
• Strong multi-tasking skills
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s in Electrical Engineering or related engineering field and 10+ years of experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7199
Job Location: Sterling Heights, MI
Rate: Based on experience
Duration: 12 Months
Input Date: 11/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Peggy Holcombe
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Electrical Design Engineer

Description:
Are you looking for an exciting career opportunity as an Electrical Design Engineer?  Please reach out to Pam at:  pzack@pdstech.com or call her at 480.212.0849

Description:  
Analog Design Engineer
 
Experienced Electronics Engineer to provide technical expertise and project planning support to develop new product lines and to support existing group product lines with design engineering related functions.
 
This position requires experience interacting with customers and working in a team environment. 
 
Key Responsibilities:



  • Provide Analog Design and Analysis expertise utilizing Cadence Simulation tools. 
  • Provide leadership in and conduct activities associated with new product development as it pertains to design, documentation, engineering analysis, product design, drawing preparation, and Design Reviews as well as support of business development (marketing) activities.  
  • Provide leadership in and conduct activities associated with support of existing product manufacturing efforts as it pertains to design, documentation, and general support of inspection processes, manufacturing processes and test processes and cost reduction activities to include engineering analysis, product design, drawing preparation, cost estimation, and product planning.  
  • Provide technical support and guidance (mentoring) to junior engineers, to include review and critique of design documentation, development plans, test plans, and test results. 
  • Provide leadership of failure investigation activities through application of rigorous root cause analysis. 
  • Provide project design support of Internal Research and Development (IRAD) activities, as well as providing engineering leadership and conducting design engineering tasks related to those activities. 
  • Assist in design and development of manufacturing tooling and test equipment. 
  • Prepare reports and presentations related to design and development activities, including technical proposal submittals, test plans and reports. 
  • Support kaizen-related process improvement activities.

 
Qualifications:

  • Bachelor of Science Degree in Electronics Engineering; Advanced degree a plus. 
  • Minimum of five years of experience in design-related engineering position. 
  • Experience developing and integrating electronic assemblies into product designs preferred.  This includes leveraging the entire value chain from supplier through final factory manufacturing operations. 
  • Experience with EMI/EMC compliance. 
  • Experience with DOE, FMEA, PFMEA, Six sigma or similar analysis tools. 
  • Experience with government specifications and industry standards related to safety critical electronics a plus. 
  • Advanced skill level in Microsoft Office (Word, Excel, Access, and PowerPoint). 
  • Intermediate skill level in Microsoft Project and Visio preferred. 
  • Advanced skill level in Analog Simulation, preferably with Cadence PSPICE. 
  • Strong Analog background with High Power, High Voltage experience a plus. 
  • Experience performing Stress Analysis and Thermal Analysis.
  • Demonstrated ability to apply mathematics, science, and technology in product design and complex problem solving 
  • Superior written and oral communication skills.

 
 This is a Direct Hire position with opportunity for growth! 



 
Qualifications:  
  • Bachelor’s Degree- Mechanical, Aerospace or Electrical Mechanical.  Advanced degree a plus
  • 5 years’ experience in design; preferably in related field.
  • Design experience- plan to production is a must. 
  • 2 years participation in cross functional team while developing products is preferred.
  • Presentation skills are required. 

 
Job Number: 1810089190
Job Location: Hollister, CA
Duration: 0 months
Input Date: 08/01/2018
Last Updated: 02/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mfR8AAI&URLSource=cjhunter

Electrical Design and Analysis Engineer 4 at Huntington Beach, CA

Description:
Design and Analysis Engineer 4

Location: Huntington Beach, CA
Duration: 6+ months

Description:
Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for Automatic Test Equipment (ATE). Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

Required Skills:
Knowledge of ATE design to meet unit under test (UUT) electrical, interface, and communication protocol requirements. Experience with ATE Engineering, knowledge of test instruments device driver wrappers and self-test software development.

Preferred Additional Skills:
Experience in software development using C, C++, C# and/or ATLAS. Experience in software development using LabWindows/CVI. Knowledge of the following aircraft communication protocols: 1553, ARINC 429, RS-232, RS-422, and Ethernet.

Education / Experience:
Bachelor's and 9 or more years' experience, master’s with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code:
664-Electronic Sys Design & Analy
 
Job Location: Huntington Beach, CA
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 09/13/2018
Last Updated: 02/14/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: mzoheb@iconma.com
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Must Be Eligible for a Clearance

Proven and demonstrated experience with integration of electrical / electronic components and associated software/hardware into ground combat vehicles

Experience with network-based vehicle (combat or automotive) architectures

Experience trouble shooting Vetronics systems required

Experience with link-based (e.g., CAN) diagnostic systems required

- Experience with J1939 CAN protocol

- Experience with SIL and vehicle-based Vetronics testing

- Familiarity with TCP/IP and UDP protocol
 
Job Number: 45414
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 01/09/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Seeking an Electrical Engineer. The selected individual will support multiple aspects of the project including:
• Design and build of electronics hardware and circuits for power, control, and diagnostic systems associated with experimental plasma physics hardware and
• Design and interface with facility engineering team on the design and build of specialized lab facilities and their interface with experimental plasma physics hardware. Tasking significantly involves high voltage/power systems with stringent emission requirements. Tasking includes circuit/PCB design, electrical power system and distribution design, energy storage system design, electrical wiring and controls design, and support to EMI/shielding analysis and design.

• Will work with other engineers and physicists on daily basis on this tasking in office and lab environment (hands on build and test of hardware is required).
• Will write and conduct component installation, checkout, and troubleshooting procedures.
• Will support laboratory operations and testing.
• Must be able to wear radiation sensor in laboratory environment.

Basic Qualifications:
• Bachelor’s degree OR above in electrical engineering or related field.
• Experience with electrical system hardware (laboratory or other environment).
• Experience in electrical system definition.
• Experience creating electrical schematics.

Desired skills:
• Experience with High Voltage electrical power architectures and system hardware (generation, distribution, storage).
• Experience with facility electrical and grounding design and hardware interface.
• Experience with electrical system shielding and noise reduction.
• Experience with schematic capture and PCB design using Eagle and Altium.
• Experience with PCB fabrication and test.
• Experience with connector selection and cable harness fabrication.
• Experience trouble shooting electrical systems.
• Experience in laboratory environment (high vacuum plasma physics preferred).
• Experience with laboratory diagnostic test equipment, DAQ, and PLC systems.
• Experience with Matlab and Labview software packages.
• Experience with 3D CAD tools - CATIA V5.
• Experience with PSpice and Simulink circuit design and analysis tools.
• Experience with MS Office software tools.
• Good oral and written communication skills.

The Structures Company is an AA/EOE.
 
Job Number: 249
Job Location: CA
Rate: OPEN - ***DOE***
Per Diem: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 12/03/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Electrical Engineer

Description:
PDS TECH INC. is seeking  Electrical Engineer in Tewksbury, MA
 
The primary responsibilities will be the development and implementation of test capabilities leveraging a strong working knowledge of test equipment hardware and software technologies. This is an excellent position for a test equipment engineer who has a background in digital test, analog test, RF test, or power supply test and a desire to apply those skills to combined hardware/software test solutions.You will be joining a diverse project team for the design and development of test equipment and test solutions for testing radar, sonar, communication, missile, combat control systems, subsystems and components for various programs within IDS. These products can contain Analog, RF, Microwave, Acoustic, High Power, and Digital Electronic technology and can also have Software (embedded, firmware, Signal Processing, VHDL, etc.). Test Development Engineers are involved from the beginning of product design as a concurrent engineering effort, continuing into supporting engineering design verification testing, production test and final system level verification and sell-off; includes in-plant or field testing. Typical test solutions include simulation, stimulation and data acquisition capability to provide stimulus and response test environments for verifying functional performance. Typical test systems encompass Hardware In the Loop Stimulators, Custom Automatic Test Equipment, Commercial Automatic Test Equipment, High Power, Mixed-Signal, Digital and Environmental Stress Screening systems, mechanical holding fixtures, adapters, and interface cabling and harnessing. .

Basic Qualifications: B.S. in Electrical Engineering or Computer Engineering or B.S. in Electronic Engineering Technology8+ years’ experience in engineering design and development environment with 4+ years direct exposure to Test Equipment  Design and Development tasks U.S. Citizenship is required Desired Qualifications: Digital, and/or Analog, and/or RF, and/or power supply test hardware design experienceUse of Commercial Test and Measurement EquipmentVXI/VME/MXI/PXI/CompactPCI Application DevelopmentCMMI and 6 Sigma ExperienceStrong interpersonal and communication skillsGood decision-making and problem-solving skillsExperience with VHDL a plusSoftware applications / programming skills a plusAbility to obtain a security clearanceKeywords: Test Equipment Design and Development, Digital, Analog, RF, power supply test, hardware design, clearance 
 
 
Job Number: 1810089990
Job Location: Tewksbury, MA
Duration: 12 months
Input Date: 09/04/2018
Last Updated: 02/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Michael Accunzo
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002miceAAA&URLSource=cjhunter

Electrical Engineer - Clearance

Description:
PDS Tech is seeking an Electrical Engineer in Marlborough, MA
Must have active Secret Clearance
The Power and Electronic Systems Department is responsible for design engineering including the following areas:• Power System Design - Power System Noise, System Simulation and Modeling, Solid State Transmitters, Tube Transmitters, High Voltage Design, Power Sources, Generators• Power Conversion - AC/DC, DC/DC and DC/AC, Linear and Switching Supplies, Power Factor Correction (PFC), Zero Voltage Switching (ZVS), Resonant Circuits, Synchronization, Noise Controls• Power Distribution - Ground, Air, Shipboard, and Space, Power Generation, Line Voltage, High Current, Low Voltage, Micro-Power, DC, AC, Multi-Phase Power Control, Fault Reporting, Isolation, Protection Circuits, Redundant Systems• Power Sub-System Design - Filters, Harmonic Control, EMI, Circuit Simulation, Magnetics, Protective Relay Systems, Short Circuit and Stress Analyses• Control Systems – Servo Control Systems, Motor/Power/Process Control, Digital Feedback Systems, Command Generation, Inertial Stabilization, Navigation Algorithms
 
Required Skills:• BS in Electrical Engineering or equivalent• 6+ years of related experience• Modeling and simulation using PSPICE, MATLAB/Simulink, or similar computer based tools• Excellent written and verbal communication• Required: This position requires active Secret Clearance.
 
Job Number: 1810090154
Job Location: Marlborough, MA
Duration: 12 months
Input Date: 09/04/2018
Last Updated: 02/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Michael Accunzo
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mitzAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design & Analy. Engineers - Many Needed

Description:
Must be degreed & ability to obtain security clearance
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
Level 4 & 5

Excellent sign on bonus****

*Email resume to:mmccarthy@pdstech.com
 
Job Number: BO-OK - 33001-33002
Job Location: Oklahoma City, OK
Rate: $74.00-82.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 12/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Electrical Systems Design Engineer 4 - 373544

Description:
**Requires the ability to obtain Secret Clearance**

Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
Qualification:
─ Electrical Power System >8 years (Required)

Experience:
─ Ability to develop work packages and design concept from statement of work and system requirements.
─ One line, three line AC & DC power architecture and power distributions.
─ Power system load flows, AC 1ph/3ph, and DC load analysis.
─ Equipment proper breaker sizing and wire sizing/voltage drop analysis.

Knowledge:
─ Electrical equipment such as integrate drive generator, auxiliary power unit, generator control unit, current transformer, generator breaker/relays, frequency 400Hz/60Hz converter, voltage AC/DC converters, and other protective devices.
─ Mil-Std-704; DO-160 power quality and FAR 25 FAA Generating Power System.
─ Hand-on test equipment is preferred.
─ Capability to provide leadership, guidance to less experienced engineer team members.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in electrical engineering.
 
Job Number: 373544
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 09/05/2018
Last Updated: 02/19/2019
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrical Systems Design Engineer 4 - 373622

Description:
**Secret Clearance Required to Start**

Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: 373622
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 10/16/2018
Last Updated: 02/19/2019
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrical Systems Design Engineer 5 - 373623

Description:
**Must be Able to Obtain Secret Clearance**

Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: 373623
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 10/16/2018
Last Updated: 02/19/2019
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes
5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 
v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience
v Experience 
o 1-3 years of electronics related experience
v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 
o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:
v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/31/2017
Last Updated: 02/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

Electrical Technician - (63) - AZ

Description:
Chipton-Ross is seeking 63 Electrical Technician located in Mesa, AZ

RESPONSIBILITIES:
Fabricate, assemble, modify, repair, test, and provide shop support to production and prototype wire harnesses and electrical assemblies. Identify nonconforming detail parts, assemblies and processes. Work with engineering to improve manufacturing processes. Constructs wire harnesses and panels by cutting, sorting, color-coding, measuring, stripping, crimping, soldering, and routing various lengths, types, and gauges of wire, heat-shrink, and other related materials. Installs wire harnesses and components in panels and other assemblies. Operates tools and equipment such as wire strippers, crimpers, solder iron, wire identification and cutting machines, heat guns, and associated tools. Locates malfunctions and determines type and amount of rework required to repair each unit. Prepares packages for harness fabrication by cutting, labeling, and kitting. Tests wire harnesses, panels, and aircraft electrical systems for continuity and proper functioning. Follows schematics, drawings, and written or verbal instructions to set up and perform duties. Completes paperwork, hardcopy and electronic version, associated with job assignment. Ensure all assemblies and detail parts are free of Foreign Object Debris (FOD) and nonconformance's issues. Inspect and evaluate materials, components, sub-assemblies, assemblies, tools and product configuration in compliance with requirements, to observe, measure, and record conformity to customer, regulatory and company specifications. Report all non-conformances to manufacturing supervision or corrective action representative. Prepare rejection tags noting deviations from specifications on dimensions, finishes, material, processes, or quality when required. Follow all safety procedures and reports unsafe conditions to safety officials or manufacturing supervision. Reports job status and restraints to coworkers and supervision.
Identifies production inefficiencies and suggests potential improvements to product or process.

Knowledgeable and skilled in electrical (wire harness) materials, fabrication and assembly methods and common shop practices.
Knowledgeable and able to interpret blueprints, sketches and written and verbal instructions.
Knowledgeable and able to apply shop math.
Knowledgeable and able to use computer systems for office and shop applications.
Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
Able to complete and maintain all required training and certifications needed to do your job efficiently.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time/First Shift
6 AM - 2:30 PM

MUST BE ABLE TO WORK 1ST OR 2ND SHIFT.

 
Job Number: 174601
Job Location: Mesa, AZ
Rate: $DOE
Duration: 12 MONTHS
Input Date: 10/17/2018
Last Updated: 02/19/2019
Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

Electrical Technician Level 2 - CA

Description:
Chipton-Ross is seeking an Electrical Technician Level 2 for an opening in Santa Barbara, CA.

RESPONSIBILITIES:
Provides engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors

REQUIRED EXPERIENCE:
Experienced integrated circuit technician to help advance the state of the art in infrared and visible imager readout integrated circuits (ROICs). Significant experience with physical layout of mixed signal VLSI CMOS transistor level designs is required. The selected candidate will perform silicon layout of analog and digital submicron transistor level designs in support of advanced infrared cameras and imagers. Designs include ultralow noise analog circuit blocks, low power analog to digital conversion, high speed multi GHz data transmission and serializers. MUST HAVE CMOS integrated circuit layout experience

PREFERRED EXPERIENCE:
Schematic capture, design verification and simulation.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
4/10, Monday-Thursday 3:00 pm - 01:30 am
Full-Time


 
Job Number: 173751
Job Location: Santa Barbara, CA
Rate: Up to $45.00 DOE
Duration: 12 Months
Input Date: 09/07/2018
Last Updated: 02/19/2019
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Vetronics Design Engineer

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Electrical/Vetronics Design Engineer
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-7229

Join our Engineering team to design and develop Electrical/Vetronic architectures for ground combat vehicles. Your work will entail everything from first concepts, to the development and deployment of these advanced systems. The designs may range from semi-autonomous to fully autonomous capabilities leveraging the latest in industry.

Responsibilities:
• Perform system analysis and derive Electrical/Vetronic Architectures that meet or exceed system requirements
• Concept to production delivery support including design, debug, test, and qualification of design articles
• Design and develop Electrical Components, LRUs and Subsystems for processor, I/O, and display products
• Construct and design new control solution(s), familiarity of design concepts and approaches to motion control and fire control applications
• Perform system, subsystem, & LRU-level requirements analysis as relates to weapon motion control, identifying interfaces & required functionality
• Design, develop, and support circuit design, component selection, procurement, and prototype hardware debug and builds
• Review and develop H/W and S/W requirement documents and test plans

Qualifications:
• Broad based knowledge of electrical systems, system/subsystem, hardware, and software requirements
• Proven and demonstrated experience with integration of electrical / electronic components and associated software/hardware into ground combat vehicles
• Experience with network-based vehicle (combat or automotive) architectures
• Experience trouble shooting Vetronics systems required
• Experience with link-based (e.g., CAN) diagnostic systems required
• Experience with J1939 CAN protocol
• Experience with SIL and vehicle-based Vetronics testing
• Familiarity with TCP/IP and UDP protocol
• Able to use engineering development and test tools
• Strong interpersonal skills and ability to work with interdisciplinary teams
• Strong multi-tasking skills
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s degree in Electrical Engineering or related engineering field and 10+ years of experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7229
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 11/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Sallye Smith
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Technician / no clearance CA

Description:
163555
Electromechanical Technicians (Job Number: 18023262)

Number of Openings: 6

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Nov 12, 2018

Target End Date: Nov 1, 2019

Targets: 6**

Work Week: 9/80

Location: Redondo Beach, CA

Pay rate: $27.00 - $32.00

Duration of Assignment: Up to 1 year

Clearance: None


PRIMARY DUTIES AND RESPONSIBILITIES:
Under close supervision, performs routine technical functions related to the support of development engineering activities such as design, test, checkout, fabrication, modification, and assembly of electronics and Electro-mechanical systems, experimental design circuitry, prototype models or specialized test equipment. Applications may include analog, digital and/or video type circuits and logic systems. Guidance is readily available from superiors. Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform routine testing, checkout, troubleshooting, prototype building, environmental testing, and simple developmental engineering tasks. Performs routine operational tests and fault isolation on development systems and equipment to ensure conformance with design specifications. Diagnoses and isolates malfunctions down to component level. Conducts defined engineering tests and collects data as assigned. Utilizes routine development or diagnostic equipment including oscilloscope, VOM, DVM, signal generators and similar test apparatus. Normally assigned in area such as development, engineering, test equipment design, or the like. Excludes those assigned to production test activities. Entry Level. Excludes trainees with no academic preparation or experience.

EXPERIENCE and TRAINING:
Electronics training equivalent to 2 years technical trade school or military technical school.


Basic Qualifications:

High School diploma or equivalent and 2 years additional education and/or related experience.


Preferred Qualifications:

2 years military or applicable experience is preferred
 
Job Number: MB-1695
Job Location: Redondo Beach, CA
Rate: 32/hr max
Per Diem: no
Duration: 1 year
Input Date: 12/12/2018
Last Updated: 01/21/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Circuit Designer - 4 / OrCAD PSpice PCB LRU CA

Description:
Electronic Circuit Designer - 4 (Job Number: 18018662)

Number of Openings: 1

Location(s): United States-California-San Diego


Shift: 1st Shift

Target Start Date: Oct 8, 2018

Target End Date: Mar 8, 2019

Pay Rate: $62 to $64/hr

Work Schedule: 9/80A

Duration of Assignment: 3-8-19

Job Description

Qualified applicant to support electronics modernization effort. The SOW include performing detail electrical circuit design, circuit level analysis, support qualification testing, preparing ATP and QTP and support electrical circuit and LRU manufacturing.


Basic Qualifications:

9+ years experience with Electrical Engineering Bachelor’s Degree or an equivalency of 17 years plus High School Diploma.

Experience with OrCAD/pspice

•Experience with PCB troubleshooting
•Experience with PCB layout and routing
•Strong verbal and written communications


Preferred Qualifications:


Working knowledge of engineering practices/procedures regarding electronic components

•Experience with Altium Designer
•Experience with NGC circuit design process
•Experience with TeamCenter
 
Job Number: MB-1680
Job Location: San Diego, CA
Rate: 64/hr max
Per Diem: no
Duration: 5 months
Input Date: 10/04/2018
Last Updated: 12/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electronic Component Engineer (177)

Description:
*This is a full time, 9 month, contract position located in Grand Prairie, TX*



We are seeking an electronics component engineer who will be working on DoD/military component analysis, selection, screening, parts qualification and de-rating of electronic components. Duties will include component material selection, new component release/qualification, handle component related failures, handle component noncompliance issues, able to identify pure-tin and counterfeit part detection.



Required:
*2 years’ experience working as an engineer within the electronics components field.
*Electrical component manufacturing process and physical property analysis experience
*Able to get a security clearance after starting, which requires applicants be US Citizens.
*Engineering degree in material science or equivalent



Pluses:
*Experience in the disposition of Q-Notes.
*Familiar with parts release processes, and formal configuration boards.
 
Job Number: 177
Job Location: Grand Prairie, TX
Input Date: 01/10/2019
Last Updated: 02/12/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Email: tom@cssstaffing.com
Website: www.cssstaffing.com

Electronic Design & Analysis Engineers -- Avionics

Description:
Job locations:
Long Beach, Huntington Beach, or El Segundo, CA

ACS Group has been in the aerospace industry for over 30 years - Helping top talent in the aerospace industry find exceptional careers! Positions available now

-Medical
-Dental
-Per Diem
-401(k)
-Life
-Vision

Please email us to see if your background matches any of our job openings
 
Job Location: California
Input Date: 04/25/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner or Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: janice.plattner@acsicorp.com; andrew.walbert@comforce.com
Website: www.acsicorp.com

Electronic Systems Design & Analysis Engineers

Description:
ACS Group has been in the aerospace industry for over 30 years - Helping top talent in the aerospace industry find exceptional careers! Positions available now

-Medical
-Dental
-Per Diem
-401(k)
-Life
-Vision

Please email us to see if your background matches any of our job openings
 
Job Location: Oklahoma City, OK
Input Date: 04/25/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner or Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: janice.plattner@acsicorp.com; andrew.walbert@comforce.com
Website: www.acsicorp.com

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes
5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 
v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience
v Experience 
o 1-3 years of electronics related experience
v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 
o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:
v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes
5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 
v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience
v Experience 
o 1-3 years of electronics related experience
v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 
o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:
v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 04/07/2017
Last Updated: 02/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Packaging Engineer UG/NX NY

Description:
Request number: 5654
Job title: Electronics Packaging Engineer
Number of openings: 1

Position location: East Aurora - NY
Employment type: Contract
OT exempt: No

Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Maximum Hourly Pay Rate: 53
Start Date: 10/22/2018
Tentative End Date: 10/21/2019

Electronics Packaging Engineer

Essential job functions:
This is a mechanical design engineering position within an EE design function. It entails the mechanical packaging of electronic circuits and related hardware.

Specific requirements are as follows:
-Experience with the packaging of electronics systems intended to be used in severe thermal and dynamic environments.
-Knowledge of materials and processes relevant to aerospace electronics.
-Experience with contemporary solid modeling tools such as Unigraphics NX.
-Knowledge of design techniques for high voltage systems
-Experience with FEM thermal and structural analysis tools such as ANSYS Workbench.
-Experience with Thermal Desktop and Icepak (nice to have)
-Knowledge of environmental test of aerospace electronics.

Education:
BS Degree preferably in Mechanical, Aeronautical or Electrical Engineering plus six years minimum of design/development engineering experience.

Masters Degree, preferably in Mechanical, Aeronautical or Electrical Engineering plus three years of design/development engineering experience.
 
Job Number: MB-5654
Job Location: East Aurora, NY
Rate: 53/hr
Per Diem: no
Duration: 12 months
Input Date: 11/05/2018
Last Updated: 11/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electronics Technician

Description:
PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 


In your role, you will:
  • Assemble electrical or electronic systems and support structures.
  • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
  • Hand solder components under a microscope.  Fine pitch soldering experience is required.
  • Use hand tools and work instructions to assemble units according to product specifications.
  • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

Qualifications:
  • Fine pitch soldering experience is required is a plus 
  • 5 years experience in electronics assembly preferred.
  • Must have a High School Diploma or GED
  • Associates degree in Electronics or Engineering Technology desired.

Desired Certifications:

  • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
  • IPC-7711/7721: Rework and Repair of Electronic Assemblies
  • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

Please call Clyde at 813-426-9917 or email ccallwood@pdstech.com for more information
 
 
Job Number: 1610047076
Job Location: Clearwater, FL
Per Diem: No
Duration: 12 months
Input Date: 10/22/2018
Last Updated: 02/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000026C5mAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician / Must have hand soldering experience. Cable harness fabrication and bench work experience preferred TX

Description:
163437
1219-1 Electronics Technician
Work Location: Fort Worth, TX
Status: Open

Qty: 2
Desired Start Date: 1/29/2019
End Date: 7/29/2019

Job Description:
Consist of engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25 lbs. These responsibilities will include fabrication of electronic/electrical chassis and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors. An AA in Electrical or Electronics Engineering is highly preferred. Extensive hand soldering experience mandatory.

**Must have hand soldering experience. Cable harness fabrication and bench work experience preferred.

Region: Fort Worth, TX
Level: Level 2: 3+ YRS
Pay Rate: $33.00 Hourly
 
Job Number: JE-1219-1
Job Location: Fort Worth, TX
Rate: 33/hr max
Per Diem: no
Duration: 6 months
Input Date: 01/15/2019
Last Updated: 01/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrophysics Engineer IV - Electromagnetic Compatibility - (OK)

Description:
Several openings in Oklahoma City, OK.

Active Secret Clearance, NOT required to start.

Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate complex systems and components into higher level systems and platforms. Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts critical tests of various kinds to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Generates major sections of proposals to support development of new business.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: ElectroPhysicsOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 10/16/2018
Last Updated: 01/25/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Electrophysics Engineer/Scientist

Description:
PDS Tech Inc. is seeking an Electorphysics Engineer/Scientist, in Oklahoma City, OK.

Summary:
  • Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components.
  • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
  • Develops architectures to integrate complex systems and components into higher level systems and platforms.
  • Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements.
  • Defines and conducts critical tests of various kinds to validate performance of designs to requirements.
  • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
  • Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues.
  • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
  • Generates major sections of proposals to support development of new business.
  • Works under minimal direction.

Prerequisites:
  • Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
     

 
Job Number: 1810093660
Job Location: OK City, OK
Duration: 6 months
Input Date: 10/17/2018
Last Updated: 02/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Alex Ysassi
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f8BOAAY&URLSource=cjhunter

Electrophysics Engineer/Scientist- Level 3

Description:
PDS Tech Inc. is seeking an Electrophysics Engineer/Scientist, at the Oklahoma City, OK.

Summary:
  • Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components.
  • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
  • Develops architectures to integrate systems and components into higher level systems and platforms.
  • Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements.
  • Defines and conducts tests to validate performance of designs to requirements.
  • Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements.
  • Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested.
  • Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status.
  • Writes appropriate sections of proposals to support development of new business.
  • Works under general direction.
     


 
Prerequisites:
  •  Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

 
Job Number: 1810094690
Job Location: OK City, OK
Duration: 6 months
Input Date: 11/07/2018
Last Updated: 02/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Sheila Hernandez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qxusQAA&URLSource=cjhunter

Electrophysics Engr/Scien 3 - (5) - OK - O/M

Description:
Chipton-Ross is seeking 5 Electrophysics Engineers/Scien 3 located in Oklahoma City, OK

RESPONSIBILITIES:
Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate systems and components into higher level systems and platforms. Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts tests to validate performance of designs to requirements. Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested. Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status. Writes appropriate sections of proposals to support development of new business. Works under general direction.

EDUCATION:
Accredited Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

WORK HOURS:
Full-Time/First Shift
8 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 174946
Job Location: OK City, OK
Rate: $DOE
Duration: 6 MONTHS
Input Date: 11/07/2018
Last Updated: 02/19/2019
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Electrophysics Engr/Scien 5 - OK - O/M

Description:
Chipton-Ross is seeking an Electrophysics Engineer/Scien 5 located in Oklahoma City, OK

RESPONSIBILITIES:
Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate multiple systems into higher level systems and platforms. Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements. Develops new and improved modeling and simulation techniques. Leads development and execution of critical tests to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Creates new tools to improve management of projects. Leads development of major sections of large-scale proposals to support development of new business. Works under consultative direction.

EDUCATION:
Accredited Degree and typical experience in engineering classification: Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard. Experience with Military Programs and/or Commercial Derivative aircraft is highly desired.

WORK HOURS:
Full-Time/First Shift
8 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 174947
Job Location: OK City, OK
Rate: $DOE
Duration: 6 MONTHS
Input Date: 11/07/2018
Last Updated: 02/19/2019
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrophysics Engr/Scien 1

Description:
Electrophysics Engr/Scien 1
 
Location: Huntsville, AL
Duration: 6 months
 
Description:
Assists in developing and documenting requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components. Performs basic analysis to predict component performance to established requirements. Conducts simple tests to validate performance of designs to requirements. Collects data on supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle. Supports project management by gathering project status data. Gathers information to support development of sections of proposals to support development of new business. Works under close supervision.
 
Preferred skills for the Lab Tech:
- Knowledge of Electronics
- Knowledge of PCB Manufacturing
- Knowledge of Soldering
- Knowledge of Additive Manufacturing
- Experience with CAD/CAM
- Knowledge of Electronics Packaging
 
Optional Skills:
- Knowledge of conductive inks
- Knowledge of polymer processes
 
Education / Experience:
Required: Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry.
 
Skill Code:
64Z-Radio Frequency Microwave.

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 18-16333
Job Location: Huntsville,, AL
Per Diem: Available
Input Date: 10/22/2018
Last Updated: 11/01/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

Embedded Engineer - Guidance Nav & Control Engr 3 & 4

Description:
Please let me know if you would be comfortable with the job description and do send me your updated resume asap

Embedded Engineer - Guidance Nav & Control Engr 3 & 4

Location: Long Beach, CA
Duration: 6+ Months

Job Description:
Client is seeking a multi-disciplinary engineer to design, implement, and verify embedded flight electronics software algorithms, working under minimal direction.

Responsibilities include:
- Eliciting and defining the software requirements.
- Designing, implementing, and integrating a solution to meet the requirements.
- Planning and executing the validation of the requirements and verification of the solution.
The solution design and implementation are developed using Model-Based Design languages (Simulink, embedded MATLAB, and Stateflow), from which C++ code will be generated.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 62Z-Math & Algorithm Dev Analysis
 
Job Location: Long Beach, CA
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 09/13/2018
Last Updated: 02/14/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: mzoheb@iconma.com
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Electrical

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Engineer Electrical
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-7181

Responsibilities:
• Lead, design and develop specialized test tools and data collection software programs
• Verify and validate functional performance of hardware to meet engineering development, regression testing, government witness testing, and independent software tests in compliance with design requirements.
• Work with a group of lab Design & Development engineers guiding them through procedures on how the test system operates.
• Design other tools to support Power Testing, Real-Time Operational Testing, CAN / 1553 / GbE / UBIM Testing, User friendly LabVIEW application S/W to control VXI, PXI, PCI, and GbE instruments, GO, NO-GO and Failure Area indicators, Electronic Personality Interface Adapters and high density common interfaces for quick change of LRUs on test console.
• Measurement repeatability, matched data storage by part number and serial number, Tests capability for Electronic and Electro-Optical LRUs and subsystems
• Support Abrams and Stryker production test equipment and product validation
• Support and maintain laboratory conventional and computerized test equipment. At a minimum this includes selection, direction for procurement, configuration activities, and periodic / preventative maintenance, repair, and calibration of test assets on and off sites.
• Design electronic circuits, functions, and sub-systems necessary to evaluate and test products at the sub-system and system level. Includes analog and digital circuits, voltage translation, switching functions, interconnect cables, monitor panels, test boxes, and ensure design include proper grounding and shielding principles to minimize test system and interface effect on test samples.
• Provide documentation for designs, processes & procedures.
• Participate in design reviews offering constructive criticism to ensure sound designs are implemented, and placement of documents into configuration management system.
• About 20% travel time

Qualifications:
• Problem solving skills to investigate and expedite corrections to field and production issues
• Capable of operating Test Instrumentation, including Oscilloscopes, DMMs, Function Generators, and DAQs, and interpreting measurements.
• Experience developing software code, such as Visual Basic, C++, LabVIEW Experience developing electronic circuits and cables
• Experience developing electronic schematic drawings Skilled in troubleshooting electronic circuits
• Experience developing test code/scripts to control NI Data Acquisition modules is a plus.
• Must have good computer skills (email, MS-Office, internet)
• Able and willing to travel domestically, and internationally
• Able and willing to work occasional overtime and/or 2nd-shift to meet deadlines
• Good verbal and writing skills in English preferred
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s Degree in Electrical or Electronics Engineering, or Computer Engineering with a minimum of 1-3 years’ experience preferred.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7181
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 11/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Sallye Smith
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer II - FPGA Verification

Description:
Engineer II – FPGA Verification
Location: Westminster, CO
Duration: 6 months contract to hire
Openings for Level II and Principal Engineer
Description:

•Verify designs (including SOC architectures utilizing soft-core processors, digital filters, image processing algorithms, and communication interfaces/protocols), design and implement test benches and test plans for both chip-level and system level environments and create reusable verification environments that can be used across multiple projects.

•Work in System Verilog/UVM environment platform and be responsible for generating FPGA verification plan, verification matrix and coming up with verification environments for test and verification of flight FPGA code/modules.

•Work collaboratively and in tandem with FPGA design engineers and embedded software engineers.

•Span the gap between FPGA system verification and embedded software development.

•Establish and maintain effective working relationships within the department, the Strategic Business Units, Strategic Support Units and the Company. Interact appropriately with others in order to maintain a positive and productive work environment.
Requirements:

•BS degree or higher in Engineering or a related technical field is required plus 5 or more years of related experience.

•Ability to own entire test bench, create environment from scratch, and set up whole simulation environment.

•Proficiency with Modelism/Questa tools sets

•Each higher-level degree, i.e., Master’s Degree or Ph.D., may substitute for two years of experience. Related technical experience may be considered in lieu of education. Degree must be from a university, college, or school which is accredited by an agency recognized by the US Secretary of Education, US Department of Education.

•Strong Verification development methodology and test-benching for FPGAs.

•Strong software engineering skills, experience with System Verilog and OVM/UVM, C/C++, object-oriented design, and familiarity with electronic circuit design and electronic systems.

•A solid understanding of object-oriented concepts and experience designing class-based constrained random testbenches.

•Experience with Xilinx Vivado is a plus.

•Knowledge and experience with Windows, Unix and scripting languages (e.g. Ruby, Python, TCL) is a plus.

•Experience in documentation and verification of high-speed digital electronics, FPGAs, and embedded processor systems is desired.

•Ability to develop specifications, cost, schedule, and resource requirements for FPGA or ASIC verification plans.

•Military experience and/or ability to get a security clearance highly desired, but not required.
 
Job Location: Westminster, CO
Rate: DOE
Per Diem: Possible Split
Overtime: No
Duration: 6 month contract to hire
Start Date: ASAP
Input Date: 10/26/2018
Firm Name: ALLEGIANCE CONSULTING INC
Attention: Paulina Villagomez
Address: 10822 W TOLLER DR STE 250
City, State: LITTLETON, CO 80127
Phone: 720/947-9208
Website: www.acinow.net

Engineer, EEE Parts and Radiation -

Description:
Chipton-Ross is seeking a Senior Engineer, EEE Parts and Radiation for an opening in Redmond, WA.

RESPONSIBILITIES:
In this position, you will play a key role in the component engineering group supporting new andexisting spacecraft propulsion programs. Proficiency in radiation effects, survivability engineeringdesign, and test methods used to assure electronic components are compatible with operation inspace radiation environments expected.
50% - Provide Radiation Analysis expertise. Assess customer radiation requirements and develop derived radiation requirements for EEEparts. Create models to assess radiation risk of EEE parts. Generate and submit radiation risk assessment reports. Support radiation risk mitigation efforts. Evaluate new devices for radiation performance. Develop radiation test plans at the EEE part level and support test execution.25% - Support design teams in the selection, evaluation, and documentation of EEE parts. Create detailed part drawings which meet customer requirements. Review parts lists and ensure selected parts comply with customer requirements. Generate Non-Standard Part Approval Requests (NSPARs).15% - Lead investigations of failed components. Use industry standard failure investigation processes to determine root cause of failures. Generate failure investigation reports and recommend effective corrective actions to preventrecurrence of failure.10% - Mentor junior team members.

REQUIRED EXPERIENCE:
Advanced knowledge of semiconductor physics, radiation effects on semiconductor devices,circuit design, and electronics testing. Knowledge of radiation effects (TID, ELDRS, SEE). Experience with radiation effects simulation software. Advanced knowledge of applicable industry practices and standards in EEE parts and radiationeffects. Experience with formal problem solving and failure analysis tools and techniques. Experience working an equivalent engineering environment is desired.

EDUCATION:
Accredited Bachelor's degree in Electrical Engineering, Physics or related field and 5 years of related experience (or an equivalent combination of education and experience).

WORK HOURS:
9/80
Full-Time

 
Job Number: 174480
Job Location: Redmond, WA
Rate: $DOE
Duration: Direct
Input Date: 10/12/2018
Last Updated: 02/19/2019
Firm Name: CHIPTON ROSS
Attention: Lucas Medina
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmedina@chiptonross.com
Website: www.chiptonross.com

Engineer, EEE Parts and Radiation - CA

Description:
Chipton-Ross is seeking a Senior Engineer, EEE Parts and Radiation for an opening in Canoga Park, CA.

RESPONSIBILITIES:
In this role, you will play a key role in the component engineering group supporting new and existing spacecraft propulsion programs. Proficiency in radiation effects, survivability engineeringdesign, and test methods used to assure electronic components are compatible with operation inspace radiation environments expected.
50% - Provide Radiation Analysis expertise. Assess customer radiation requirements and develop derived radiation requirements for EEEparts. Create models to assess radiation risk of EEE parts. Generate and submit radiation risk assessment reports. Support radiation risk mitigation efforts. Evaluate new devices for radiation performance. Develop radiation test plans at the EEE part level and support test execution.25% - Support design teams in the selection, evaluation, and documentation of EEE parts. Create detailed part drawings which meet customer requirements. Review parts lists and ensure selected parts comply with customer requirements. Generate Non-Standard Part Approval Requests (NSPARs).15% - Lead investigations of failed components. Use industry standard failure investigation processes to determine root cause of failures. Generate failure investigation reports and recommend effective corrective actions to preventrecurrence of failure.10% - Mentor junior team members.

REQUIRED EXPERIENCE:
Advanced knowledge of semiconductor physics, radiation effects on semiconductor devices,circuit design, and electronics testing. Knowledge of radiation effects (TID, ELDRS, SEE). Experience with radiation effects simulation software. Advanced knowledge of applicable industry practices and standards in EEE parts and radiationeffects. Experience with formal problem solving and failure analysis tools and techniques. Experience working an equivalent engineering environment is desired.

EDUCATION:
Accredited Bachelor's degree in Electrical Engineering, Physics or related field and 5 years of related experience (or an equivalent combination of education and experience).

WORK HOURS:
9/80
Full-Time

 
Job Number: 174481
Job Location: Canoga Park, CA
Rate: $DOE
Duration: Direct
Input Date: 10/12/2018
Last Updated: 02/19/2019
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Manager, Systems Software (749)

Description:
**Must be US Citizen to apply for Secret cleared positions**



CSS Staffing is seeking an Engineering Manager, Systems Software, who has proven experience with a strong systems software development and programmatic background who has experience in managing systems, and software development teams – from project estimation to planning, executing, testing, software release management and QA - for development programs and production support activities across a diverse product portfolio in a matrix organization to achieve operational results. This role includes active management of the systems, software engineering functional group as well as management of cross-functional engineering activities on assigned programs.



Required Skills

*BSEE or related degree in software engineering or computer science

*Proven experience leading engineering teams with five (5) years minimum experience as a supervisor/manger.

*Minimum of Five (5) years’ experience with IA technologies and of their interactions to ensure system performance, including:

Mechanical structures, stiffness, inertia, weight trade-offs

System, motion and dynamics, expected pointing accuracy

Electric motors, performance, torque, construction

Position measurement with resolvers, Inductosyn, measuring tools

System performance calculation, simulation –consumption, vibration, temperature…-

Electronics hardware, noise, emissions

Control loops, reaction speed, performance assessment

Software for control, diagnostic, graphical user interface (Linux/RTOS/Python)

Positioner testing, tuning, qualification, field installation

EMI design, test, remediation

MIL/Rugged environment design, qualification test

*Experience with engineering and quality requirements for defense applications

*Ability to obtain and maintain a secret security clearance



Desired Skills

*Masters’ Degree in Engineering or Management

*Twelve (12) years minimum experience in new product development and engineering-to-production transitions

*8 years’ experience developing hardware requirements to meet higher-level system goals

*8 years’ experience with simulation software such as ModelSIM

*8 years’ experience with Altium Designer for schematic entry

*8 years’ experience with Altera’s Quartus Prime IDE

*8 years’ experience generating product cost estimates and writing proposals

*8 years’ experience with code development processes or of LCM and/or Stage-Gate methodology

*Active secret security clearance highly desired
 
Job Number: 749
Job Location: Exeter, NH
Input Date: 01/10/2019
Last Updated: 01/22/2019
Firm Name: CSS STAFFING
Attention: Shay Rosen
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Mechanical Design 3 / Catia V5 CA

Description:
163185
Engineering Mechanical Design 3 (Job Number: 18017716)

Number of Openings: 1

Location(s): United States-California-San Diego


Shift: 1st Shift

Target Start Date: Aug 30, 2018

Target End Date: Jan 25, 2019

Pay Rate: $53/hr

Work Schedule: 9/80



We are looking for a Mechanical Design Engineer for the Global Hawk program for the Equipment Installations Design Team.

This design engineering position will be responsible for the development, drafting, release and support to installation of detail aircraft components, support assemblies and equipment installation package BTPs/Drawings.

This will include both traditional 2D drawings using CATIA V5 drafting in accordance with NGC Design standard practices, fit/tolerance analysis/evaluation, design for manufacturability and coordination with other engineering disciplines of fully compliant hardware.


This designer will also develop and produce equipment installation requirement packages using 3D Model Based Definition and Functional tolerance Analysis in accordance with design standards for both secondary structure and electronic and payload equipment into the USAF Global Hawk UAS.

Basic Qualifications:
•B.S. Degree in Mechanical Engineering, Aerospace Engineering plus 5 years of experience.
•1 years experience with CATIA V5 for mechanical design
•5 years of aircraft mechanical design experience



Preferred Qualifications:
•2 years experience with aircraft equipment installations, secondary structure design and equipment packaging design
•Experience with ANSI Y14.5 GD&T for producible design.
•Experience with designing aircraft components for retrofit modification.
•Experience with military aircraft safe wire installations in accordance with SAE AS 50881
•Experience with design for human factors in accordance with MIL-STD-1472 or similar
•Experience with TeamCenter 2007, TeamCenter Unified/ CPLM
 
Job Number: MB-1684ATO
Job Location: San Diego, CA
Rate: 53/hr
Per Diem: no
Duration: 5 months
Input Date: 12/18/2018
Last Updated: 12/20/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Specialist Tracked Fire Control

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Engineering Specialist Tracked Fire Control
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-7198

Responsibilities:
• Develop NXP microcontroller software using S32K Design Studio IDE to interface with motor drivers, positional sensors, and other sensors using SPI, I2C, SPI like interfaces, EIA-422/485, and other serial interfaces
• Design Control Systems for small motors used to control actuators with positional and/or encoder feedback.
• Develop Graphical User Interfaces (GUIs) using Visual Studio for engineering testing applications and simulations.
• Support circuit card and/or electronic designs including component selection, procurement, and oversight of hardware/software build.
• Support concept to production including architecture analysis, trade studies, requirements analysis, engineering reviews, design, test, and qualification.
• Support circuit board specifications, ICDs, and test plans.
• Review and develop hardware and software requirement documents and test plans.
• Design utilizing high and low speed digital communications standards such as: EIA-422/482, EIA-232, USB, SPI, I2C, CAN, TCP/IP, SPI like interfaces, and other serial interfaces.
• Design, develop, and test electronics, components, and subsystems in support of integration of thermal imaging systems, cameras, lasers, radar, direct view optics, and stabilized control systems.
• Support integration & test of electrical control devices, sights, and sensors on various vehicle platforms.
• Work with other members of the engineering staff to ensure the product meets its requirements.
• Prepare and present written reports, status reports, and presentations as necessary.
• Provide technical support and communication to the company program office, customers, and internal departments.
• About 10% travel

Qualifications:
• More than 5 years of applicable experience programming microcontrollers (NXP preferred)
• Experience with NXP Microcontrollers preferred S32K series
• Experience with NXP S32K Design Studio IDE
• Experience with C & C# programming languages
• Experience with interfacing with EIA-422/482, EIA-232, USB, SPI, I2C, CAN, TCP/IP, SPI like interfaces, and other serial interfaces
• Experience with Control Systems for small motors used to control actuators with positional and/or encoder feedback using a microcontroller
• Experience with analog and digital video circuit design (RS-170, HD-SDI, LVDS, DVI, DisplayPort) preferred
• Experience with video distribution techniques preferred
• Experience with Gigabit/10 Gig Ethernet, GigEVision, and Ethernet AVB preferred
• Experience with Microsoft Office and Microsoft Visual Studio 2013 or later
• Familiarity with Military Standards and test requirements
• Able to use engineering development and Tools
• Capable of Obtaining a Security Clearance preferred
• Occasional overtime, and weekend hours may be required to complete critical tasks
• Strong Interpersonal skills and ability to work with interdisciplinary teams
• Strong Multi-tasking skills
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• More than 10 Years of applicable experience with a Bachelor’s Degree in Electrical Engineering or Computer Engineering. Other technical degrees will be considered with relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7198
Job Location: Sterling Heights, MI
Rate: Based on experience
Duration: 12 Months
Input Date: 11/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Detrom Garrett
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer II - (Sylmar, CA)

Description:
- Design solar panels, solar panel components, and associated support tooling in AutoCAD / Inventor Pro Suite. Also
design and update searchlight and high intensity illumination products for solar cell and solar panel test in AutoCAD /
Inventor Pro Suite.
- Work closely with Panel Product Engineers to translate customer schematics and specifications into manufacturing
efficient panel layouts and detailed manufacturing drawings, inclusive of Bill of Materials (BOMs), detail views, wiring
lists, schematics, and notes. Participate in round-table drawing reviews and CAD-check of drawings generated by others.
Generate soft tooling files from AutoCAD model. Learn to generate and check photomask drawings.
- Work with Illuminations Systems Product Engineers to generate and update part and assembly documentation needed
for procurement, manufacturing and assembly, including generation of 3D models, verification of model tolerances, and
model management in VAULT.
Work with Product and Process Engineers to identify and define the manufacturing support tooling necessary to safely
build and test the hardware in conformance with customer requirements. Generate tooling procurement and assembly
drawings and models using AutoCAD/Inventor Pro Suite.
- Support proposal and design trade efforts by providing rapid assessment of potential layout options. Assess
customer ICDs for manufacturability and provide feedback/improvement suggestions to enhance compliance and/or
manufacturability. Participate in LEAN improvement initiatives from both manufacturing and engineering perspective.
Continually advance ideas for streamlining both design/documentation and manufacturing processes by applying DFMAT
principles to all generated and reviewed deliverable hardware and manufacturing/support tool designs.
- Apply GD&T principles to assure manufacturability for internally built assemblies and to help resolve procurement
issues.
- Use Finite Element Analysis to support new design development and Root Cause investigations. Use Inventor CFD tool
to assess thermal and mechanical stress on deliverable hardware and to assess factors of safety for assembly/ground
support tooling.
- Assist Product Engineering in preparation of program SDRL documentation, including parts and material lists, mass
analysis, magnetic moment analysis, and detailed design descriptions for internal and customer review packages. Learn
to perform radiation and power analysis and to generate handling procedures and hardware test reports to backfill as
needed during periods of high volume activity.
Qualifications - Internal
Basic Qualifications
- Proficiency in 2D and 3D CAD modeling using AutoCAD/Inventor Pro Suite 11 (or higher), including:
- Use of block part libraries
- Generation of multilayer drawing packages, detailed assembly views, and schematics
- Familiarity with AutoDesk Vault
- Demonstrated working knowledge of basic GD&T principles
- Working knowledge of Finite Element Analysis techniques, preferably using Inventor Pro Suite Analysis package
(including definition of model, mesh, and boundary conditions and interpretation/presentation of the results)
- Ability to read/generate electrical schematics
- Experience with PCBs or other electronics packaging and wiring design
- Ability to communicate effectively with a diverse group of both internal and external customers and colleague
Preferred Knowledge / Skills
- Familiarity with VBA, SQL, or Labview
- Familiarity with basic physics of solar cells, photolithographic processes, Aerospace materials and assembly techniques,
PCBs and electronics, FEA and FMECA analysis techniques
- Ability to compile and present data using Excel and PowerPoint, and to generate/update procedural documentation using
MS Word
Typical Education / Experience
Degree and typical experience in engineering classification: Bachelor's and 2 or more years' experience or a Master's
degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in
engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required,
accreditation standard.
 
Job Number: EquipToolECA
Job Location: Sylmar, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 11/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

FPGA / DSP Design Engineer w/ ASIC (584)

Description:
*These are full time, 1 year contract positions, located in Orlando*


We seek a hands-on ASIC FPGA/DSP Design Engineer to design electronic circuits. Will be responsible for component selection, evaluation, test box design, prototype creation and checkout along with digital and analog analysis. Engineer will design and develop evaluation boards and test methodologies/interface hardware required to evaluate the design through systems integration, test and final device design and customer approval.



Required:
*6+ years’ experience for level 3, conducting firmware digital design engineering using FPGA/DSP or 11 years experience for Level 4 job.
*Familiar with video system design, synchronization, image processing operations and display formats.
*Active Secret Clearance

*On site work only, no remote work possible for this position.
*BSEE



Pluses:
*Verilog, C/C++, MathLab/Simulink, System Verilog languages; Synopsis Synplify, Synopsis VCS, NCSim, ChipScope tool sets.
*Familiar with Xilinx, Altera Part family internal FPGA fabric and IP and model based compilers

*Aerospace design experience
 
Job Number: 584
Job Location: Orlando, FL
Input Date: 02/06/2019
Last Updated: 02/12/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Email: tom@cssstaffing.com
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Firmware Design Engineer- FPGA (381)

Description:
*This is a full time, 1 year contract position, located in Orlando*

*Must be able to gain a Secret Clearance in order to apply*



We seek a hands-on FPGA/ASIC Design Engineer to design electronic circuits. Will be responsible for designing the digital communication and BIT (build in test) for an electro-explosive controller (EED) circuit card assembly which uses a FPGA and the associated development tools.

Day to day duties will include conducting trade studies, development and release of design requirement specification for the EED circuit card assembly, parts selection and generation of parts list, schematic capture of design, circuit simulation using Synopsys tools, support EPCAD PWB development and piece part layout, coordinate design with MFC SME and present design through design assurance reviews. Engineer will design and develop evaluation boards and test interface hardware required to evaluate the design through systems integration and test.

Required:
*6+ years’ firmware digital design engineering using FPGA/ASIC for level 3 job or 11 years experience for Level 4 job.
*Experience working with DSP

*Familiar with video system design, synchronization, image processing operations and display formats.
*Must be able to get a Secret Clearance, which requires US Citizenship in order to apply.
*On site work only, no remote work possible for this position.
*BSEE



Pluses:
*Experience with Verilog, C/C++, MathLab/Simulink, System Verilog languages; Synopsis Synplify, Synopsis VCS, NCSim, ChipScope tool sets
*Experience with Xilinx and Altera Part family internal FPGA fabric and IP and model based compilers desired.
*Aerospace design experience
 
Job Number: 381
Job Location: Orlando, FL
Input Date: 11/01/2018
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Flammability Engineer

Description:

PDS Tech is seeking a Flammability Engineer for an open position in Mobile, AL

Position Summary: 



The Flammability Engineer will support Company cabin and cargo engineering team in the review and approval of interior engineering flammability data in support of major and minor changes to aircraft type design



Primary Responsibilities: 



  • Ensure aircraft type design complies with type certification requirements for cabin and cargo material flammability requirements.
  • Generate certification plans and support the creation of compliance statements in support of major projects.
  • Provide solutions to issues arising during certification projects and provide status to Management on these key issues.
  • Coordinate with suppliers during development phase of the equipment to ensure that compliance to Company requirements are satisfied. 
  • Define the certification requirements to support aircraft modification in accordance with customer's request.
  • Review and approve Airbus internal and vendor test plans and reports, including witnessing testing as required.
  • Ensure that the design can be certified and all the necessary data for test and certification is produced.
  • Provide input and feedback on matters pertaining to certification between equipment suppliers, customers and Airbus engineering organizations.
  • Generate reports as required. Reviews and approves suppliers compliance reports.
  • Create and ensure that the engineering is robust and meets integrated project requirements. 
  • Perform other tasks as assigned


Experience / Skills / Training: 



  • Clear and in-depth knowledge of FAA, European and other Foreign National Authority aircraft certification regulations pertaining to Part 23 and 25 cabin interior and flammability requirements.
  • A good understanding of the Part 23 or 25 certification process (TC & STC), regulations, orders, notices and policies.
  • Minimum of 10 years in aviation or 5 years in aircraft compliance experience, specifically cabin and/or passenger to freighter.
  • Ability to write reports and technical memorandums.
  • Strong liaison with other departments both internally and internationally.


Education / Special Qualifications: 



  • Bachelor's Degree (B.S) in Mechanical, Aerospace, or Civil Engineering preferred.

  • Position requires in-depth knowledge of Engineering Mechanics and Strength of Materials.
  • Good leadership and communication skills.
  • Minimum of 5 years in cabin or cargo compartment stress analysis.
  • Experience in static (FE and free-body), fatigue and transient analysis, Nastran, Patran, MathCad.
  • Familiar with FAA/EASA Aircraft regulatory requirements.
  • Able to utilize Microsoft Excel, Word, PowerPoint and Project PC tools


Education / Special Qualifications:
5 years of aircraft certification experience and 3 years flammability certification experience. 
Bachelor’s in Engineering and Part 23 or 25 certification process understanding.
 

 


Travel:



Up to 10% business travel.

 



Essential Functions:   



  • Vision: able to see and utilize computer screens; able to move through office and from point to point to find specific co-workers and in-house experts.
  • Hearing: able to hear in normal conversations and respond to warnings and signals.
  • Speaking:  able to participate in normal business conversations.
  • Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): able to operate standard office equipment and utilize electronic id to enter building
  • Carrying: able to carry up to 20 lbs./9kg. when transporting documents, printer paper and similar items.
  • Lifting:  able to lift up to 20lbs/9kg. on occasion.
  • Pushing / Pulling: able to push/pull office chairs and pieces of equipment
  • Sitting:  able to sit for extended periods of time in front of a computer terminal while writing bulletins or participating in meetings
  • Squatting / Kneeling:  able to occasionally able to squat/kneel to access items stored on low shelving
  • Standing: able to stand for long periods of time in meetings and discussions
  • Travel:  able to travel through office/work complex and occasionally within US for business meetings.
  • Walking (include routine walking such as to a shared printer to retrieve documents):  able to walk through office and production areas sometimes on uneven surfaces to reach meetings, visitors and direct others to meetings.

 
Job Number: 1810087122
Job Location: Mobile, AL
Duration: 6 months
Input Date: 07/19/2018
Last Updated: 02/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mWhoAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
INDUSTRIAL QUALITY ENGINEER & TEST SUPERVISOR

Description:
JSG is looking for a Quality Engineer & Test Supervisor for a direct hire opportunity in Los Angeles, CA!

SUMMARY:

The Industrial Quality Engineer & Test Supervisor is responsible for verifying that Resistance Welding and other equipment designed and assembled by Company meets the requirements defined in our drawings, procedures and checklists. Supervision of the technicians completing the calibration and final test of this equipment is a key responsibility, as well as a key source of data for determining the compliance and reliability of that equipment. This engineer will work closely with the production managers and operators to determine the root cause and resolution of quality issues encountered in our plant. They will also work with the production planning and customer service groups to assure that equipment will be calibrated and tested in time to support the commitments given to our customers.


RESPONSIBILITIES:
The Industrial Quality Engineer and Test Supervisor will be responsible for:

Collecting and analyzing data on non-conforming products, determining root cause of non-conformances, and working with employees in the manufacturing, engineering and purchasing groups to resolve the root causes identified.
Working with the engineering group to maintain and improve the calibration and final inspection procedures and checklists for our products.
Determining the test timing required to meet product shipment commitments and working with planning to assure that equipment is assembled and delivered to the test group to allow sufficient test times prior to an on-time shipment.
Supervising the technicians doing the calibration and final test.
Collaborating with colleagues in the QSS group to share resources as required to accomplish the broader mission of the group.
Training new and veteran employees as required.
Working with the R&D and engineering groups to implement more automated testing and calibration
Providing technical information as required to the test technicians.
Troubleshooting and providing technical analysis of defects in company products
Preparing and presenting reports and information as required including quality metrics and reliability statistics.
Other projects and tasks as requested by supervisor and management

QUALIFICATIONS:
Must have at least 10 years of experience as a Quality Engineer in the Electro-mechanical equipment manufacturing industry. Experience supervising people is required. Strong knowledge of electronics and PCs is required. Experience with lasers is a plus. Demonstrated success in teams developing advanced products with electronic, mechanical and software components is a strong plus.
 
Job Number: 367273
Job Location: LOS ANGELES, CA
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 11/06/2018
Last Updated: 11/23/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

INDUSTRIAL SYSTEMS PROJECT ENGINEERING MANAGER-MACHINE SYSTEMS

Description:
JSG is hiring a Industrial Systems Project Engineering Manager for our client in Los Angeles, CA!

This is not an IT position.
Local candidates only.

Responsibilities

Supervise the project managers, project engineers, and proposal manager in the Industrial Systems organization.
Work with his or her peer, the Industrial Systems Engineering Services Manager, to complete semi-custom and custom automated systems for welding, laser marking, laser processing, and precision laser cutting applications.
The Industrial Systems Project Engineering Department is responsible for successful project completion and will be provided support by the Engineers in the Industrial Systems Engineering Services Department Coordinate department’s activities with the Systems Engineering Services
Manager and Manufacturing Manager as well as coordinate activities with the Company support departments including Purchasing, Product Planning, Customer Service, Finance and Sustaining Engineering
Coach staff toward modern professional performance in the areas of:
Technically robust and advanced equipment
Creative and robust automation solutions
Engineering procedures and disciplines in a commercial environment
Presentation and communication with customers and other departments
Achieve project performance goals on equipment projects, setting and managing customer and Company expectations.
Deliver quality products on time.
Manage development projects that provide new and innovative industrial systems features and capabilities
Oversee and support the quotation activities for systems
Proposal writing and cost estimating
Pre-sale activities include conceptual design, schedule, and cost estimation of semi-automated industrial laser processing workstations.
Conceptual design with assistance from others includes: cycle time estimate, mechanical layout of workstation, tooling concept, block diagram of electronic controls, and flowchart of overall man-machine interaction and machine functions.
Cost estimation includes estimation of NRE, RE, assembly, testing and materials.
Provide administrative management of systems project engineering department, including staffing, performance appraisals, career development,
reporting, and participation in company-wide management and process improvement initiatives
Partner with vendors and other third party concerns to augment systems and execution capacity to match our order demand and to provide added industrial systems features and capabilities

Requirements

Eight years experience in a technical management capacity at an industrial firm.
BS degree in Mechanical or Electrical Engineering
Experience with motion control equipment, industrial machines and automation
Excellent problem solving skills
Good verbal and written communication
Track record of project definition and project completion
Excellent time management skills and follow-though with ability to accomplish day-to-day tasks while continuing to make progress, and bring to completion,longer term projects.
Good verbal and written communication
US Citizen due to customer visit and specification requirements
Ability to occasionally travel domestically and internationally
 
Job Number: 367484
Job Location: LOS ANGELES, CA
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 11/06/2018
Last Updated: 02/15/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda J Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

Industrial Electrician

Description:
Primary Responsibilities:
All areas of electrical work will be performed including bending conduit, pulling wire, control circuitry and reading electrical blue prints.
 
Position Requirements:
High school diploma or equivalent (GED) required.
2-3 years of experience in commercial/industrial work preferred. Medium voltage and electronics experience a plus.
Need to possess a working knowledge of NEC electrical codes, and strong conduit bending skills. Pulling wire and terminating devices such as receptacles, switches, motors and other electrical items are everyday practices.  Experience with Panel boards, Transformers and Distribution equipment helps. State journeymen or Masters license a plus. Work required of applicant mirrors a Commercial/Industrial Construction Electrician.
 
 
Job Number: 1810094540
Job Location: De Pere, WI
Duration: 6 months
Input Date: 11/01/2018
Last Updated: 02/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qxVfQAI&URLSource=cjhunter

Industrial Electrician

Description:
Primary Responsibilities:
All areas of electrical work will be performed including bending conduit, pulling wire, control circuitry and reading electrical blue prints.
 
Position Requirements:
High school diploma or equivalent (GED) required.
2-3 years of experience in commercial/industrial work preferred. Medium voltage and electronics experience a plus.
Need to possess a working knowledge of NEC electrical codes, and strong conduit bending skills. Pulling wire and terminating devices such as receptacles, switches, motors and other electrical items are everyday practices.  Experience with Panel boards, Transformers and Distribution equipment helps. State journeymen or Masters license a plus. Work required of applicant mirrors a Commercial/Industrial Construction Electrician.
 
 
Job Number: 1810094541
Job Location: Manitowoc, WI
Duration: 6 months
Input Date: 10/31/2018
Last Updated: 02/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qxVkQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Inspector 2 (Product Quality) FL

Description:
Inspector 2 (Product Quality) (Job Number: 18023412)

Number of Openings: 1

Location(s): United States-Florida-Saint Augustine


Shift: Multiple

Target Start Date: Dec 17, 2018

Target End Date: Dec 17, 2019

Pay rate: $21 - $25

Work schedule: 4/10

Duration of assignment: Up to 1 year

Clearance: None

Uses predetermined methods, operations, setups and prescribed specifications to visually inspect in-process and completed products such as electronic units and subsystems, precision electromechanical assemblies or mechanical units, subassemblies, structural flaws, internal defects, and missing welds. Uses various measuring devices. Accepts or rejects new or reworked product and/or material, inspecting for defective or malfunctioning units or systems. Works from blueprints, diagrams, dial indicators, micrometers, scales, fixtures, customer specifications, drawing or inspection instructions and checklists. May monitor and verify quality in accordance with statistical process or other control procedures.


Basic Qualifications:

High school diploma/GED.

Military training in aircraft structural or mechanical repair a plus. Minimum four (4) years’ experience in aircraft structural or mechanical

inspections or advanced repair. Knowledgeable and experienced with Inspection techniques and Inspection tools


Preferred Qualifications:

Knowledgeable and familiar with St. Augustine Aircraft Integrated Center of Excellence Manufacturing Center Product Quality processes and procedures. Experienced in documenting and processing product non-conforming material tags, understanding the preliminary review process, and utilizing the Manufacturing Execution System documentation tool. Proficient in navigating and referencing procedural guidance in the Command Media

library, technical data contained within Quest, Northrop Grumman Engineering specifications, MEPS, and NAVAIR

Maintenance Manuals as required. Able to work overtime and temporary assignments to other shifts upon request.
 
Job Number: MB-1700
Job Location: St. Augustine, FL
Rate: 25/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/02/2018
Last Updated: 01/02/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing or Process Engineer (169)

Description:
*This is a full time, 1 year, contract position based in Lexington, MA*



We are hiring for a shop floor manufacturing engineer who has some background in electronics or mechanical assembly.



Candidate will directly work with floor technicians and operators to resolve line issues and develop and improve process instructions, route cards, tooling, methods, and processes necessary to meet our production quality, delivery, and cost objectives.



Typical daily duties may include working with assemblers, testers, and inspectors as well as with design engineering to solve a variety of simple to complex manufacturing problems. Will work on capacity planning, production floor layouts, help with capital equipment requirements forecasting, develop ROI analysis, continuous improvement edicts, root cause analysis, value steam mapping, performance metrics, etc.



Required:
*5 years’ experience working as a manufacturing or process engineer in aerospace or defense manufacturing.
*Experience utilizing Oracle, PDM, TipQA, Shop-floor and similar floor operating systems.
*Understanding of LEAN Manufacturing principals
*Familiar with 7-S and Continuous Improvement (AS9100 or similar)
*Strong electrical test knowledge
*4 year engineering or equivalent degree (BSME or BSEE preferred)
*Able to get a Secret Clearance upon starting, must be a US Citizen (we help with this process)



Preferred:
*Active Secret Clearance
*Bonding experience
*High speed signals, fiber optics, high voltages and energetic device knowledge
 
Job Number: 169
Job Location: Lexington, MA
Input Date: 11/01/2018
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Material Handler I - WA

Description:
Chipton-Ross is seeking a Material Handler I for an opening in Redmond, WA.

RESPONSIBILITIES:
25% - Records information regarding materials received and shipped in the department computer system.
10% - Perform cycle counting activities (performing counts/recounts, researching lost items, completing cycle count records).
20% - Packaging and handling materials within company guidelines.
10% - Counting and/or weighing incoming parts to verify receipt.
25% - Performing picking/kitting activities 10% - Separating and moving materials, equipment and supplies to and from stores, warehouses, person, department, station and manufacturing areas.

REQUIRED EXPERIENCE:
1 year of related experience
Experience operating forklift, pallet jacks, and standard material handling equipment Experience with MS Office, Excel, outlook and using computer ERP/MRP system Ability to operate a 14ft box truck with lift gate A valid Washington State Driver's License Ability to move up to 50 lbs
BOX TRUCK
ERP
EXCEL
FORKLIFT
MATERIAL HANDLER
Additional Skills:
MATERIAL HANDLING
MATERIAL HANDLING EQUIPMENT
MRP
MS OFFICE
OUTLOOK
AEROSPACE
CONVEYOR
ENTERPRISE RESOURCE PLANNING
ESD
KITTING
MICROSOFT EXCEL
MICROSOFT OFFICE
MICROSOFT OUTLOOK
ORACLE
PACKAGING
SHIPPING

PREFERRED EXPERIENCE:
Experience handling ESD sensitive electronic parts Oracle ERP system Strong computer skills Experience handling explosives/energetics Excellent verbal and written communications skills Shipping/transportation experience Experience working in a regulated environment or previous aerospace experience

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80 , 6:00am to 3:30pm Shift
Full-Time

 
Job Number: 170803
Job Location: Redmond, WA
Rate: $DOE
Duration: 12 Months
Input Date: 05/07/2018
Last Updated: 02/19/2019
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer Directorate MA

Description:
163071
Mechanical Engineer Directorate

Work Site Address: Tewksbury MA
Job Number: 8577504

Start Date: ASAP
End Date: 12 Months
Position Type: Contract


We are looking for a Mechanical Engineering Directorate Project Lead in the Platform Integration Department for the Integrated Air and Missile Defense Interconnection Section.

As the Project Lead you will need to lead diverse teams of 5-15 engineers by providing highly skilled Interconnection design services across Integrated Air Missile Defense program phases focused mainly on wiring associated with Electronic Subassemblies, Power Systems, Communications Systems and Facilities.

You will Perform project management activities and provides project leadership for interconnection design teams to include technical and financial oversight of programs, proposal development, and resource allocation.

You will Serve as the day-to-day liaison to the programs concerning design team performance and execution.

Responsibilities also include coordinating program staffing needs and Teaming with the Section Manager in the execution of MED and IDS Engineering goals.

Qualifications and Education Requirements
•8+ years of related experience in wiring design, preferably in design of complex cable and harness assemblies used in applications requiring high reliability and extended life or similar related experience.
•Prior engineering project/program leadership experience

•Excellent written and verbal skills
•Masters of Science in an Engineering discipline
•Familiarity with Engineering Labor Forecasting (ELF)
•Proven multitasking skills
•Demonstrated excellence in past work performance
•Experience with proposal capture process (development of compliant basis of estimates (BOE)
•Experience with cables in military applications and environments
•Familiarity with the Estimate at Complete (EAC) Process
•EVMS Certified
•Demonstrated team player, with excellent collaboration and mentoring skills
•Advocate for process improvement, team builder and able to build strong relationships and effectively partner with internal resources.

Required Education:
•Bachelor's degree in Engineering, Computer Science, Math, Applied Physics or equivalent discipline
 
Job Number: MB-R8577504ATO
Job Location: Tewksbury, MA
Rate: open
Per Diem: no
Duration: 12 months
Input Date: 11/06/2018
Last Updated: 12/04/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Engineer

Description:
NC Engineer under minimal supervision, performs activities related to complex numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes. Strong 5-axis programming background in CATIA V5. Master Cam knowledge preferred. Vericut Knowledge preferred.


NC Engineer conducts a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size. 2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan. 3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates. 4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut. 5. Develop operator set-up sheets for numerical control machines. 6. Develop flat pattern mylars and templates as required. 7. Produce 2-D Catia tool drawings as required. 8. May act as Team Leader as required, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

NC Engineer assist in training and guiding lower level engineers as needed. 2. Assist in formulating Numerical Control policies, procedures, and specifications as required. Perform other duties as assigned. Excellent verbal and written communication skills required. 2. Strong knowledge of various machining and drafting methods, technical writing, and computer use. 3. Ability to read and interpret complex blueprints and engineering drawings. 4. Must be highly proficient with Catia modeling, drafting, and Catia NC Mill function. 5. Must have demonstrated expertise and a proven track record in support of company policies and rules, and consistently meeting objectives.
Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/22/2018
Last Updated: 11/09/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Engineer III

Description:
NC Engineer III
Savannah, GA
Rate: $47.60-$60.00


Unique Skills:

Strong 5-axis programming background in CATIA V5. Master Cam knowledge preferred. Vericut Knowledge preferred.


Education and Experience Requirements:

Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.


Position Purpose:
Under minimal supervision, perform activities related to complex numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Principle Duties and Responsibilities:

Essential Functions: 1. Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size. 2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan. 3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates. 4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut. 5. Develop operator set-up sheets for numerical control machines. 6. Develop flat pattern mylars and templates as required. 7. Produce 2-D Catia tool drawings as required. 8. May act as Team Leader as required, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

Additional Functions: 1. Assist in training and guiding lower level engineers as needed. 2. Assist in formulating Numerical Control policies, procedures, and specifications as required. Perform other duties as assigned.

Other Requirements: 1. Excellent verbal and written communication skills required. 2. Strong knowledge of various machining and drafting methods, technical writing, and computer use. 3. Ability to read and interpret complex blueprints and engineering drawings. 4. Must be highly proficient with Catia modeling, drafting, and Catia NC Mill function. 5. Must have demonstrated expertise and a proven track record in support of company policies and rules, and consistently meeting objectives.
 
Job Number: 9999
Job Location: Savannah, GA
Rate: $47.62-$60.00
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/22/2018
Last Updated: 11/26/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

NC Programmer III

Description:
Under general supervision, perform activities related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Unique Skills:
• Must be proficient NC Programming in CATIA V5. Preferred skill with CATIA V5 Programming Automation using VB/VB.NET.
• Experience NC Programming composite material (honeycomb), hardwood, and Lexan.
• Proficient in NC Programming 5 Axis machines.

Principal Duties and Responsibilities:
• Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
• Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
• Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
• Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
• Develop operator set-up sheets for numerical control machines.
• Develop flat pattern mylars and templates as required.
• Produce 2-D Catia tool drawings as required.

Additional functions:
• May represent department in contacts with other departments, and may be required to coordinate efforts with vendors or customers.
• Assist in formulating Numerical Control policies, procedures, and specifications as required.
• Must be able to read and interpret blueprints.
• Familiarity with various machining methods, technical writing, and computer use.
• Must possess good drafting, math, and geometry skills.
• Must be proficient with Catia modeling, drafting, and Catia NC Mill function.

Experience/Education:
• Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.
 
Job Number: 24-312
Job Location: Savannah, GA
Rate: $60/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 01/09/2019
Last Updated: 02/14/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: Brandon@precisionpersonnel.com
Website: www.precisionpersonnel.com

Office Administrator C - WA

Description:
Chipton-Ross is seeking an Office Administrator C located in Seattle, WA.

RESPONSIBILITIES:
Performs the following tasks for managers on the executive payroll. Coordinates and processes domestic and international business travel arrangements, monitors designated business traveler''s logistics, generates expense reports and assists in reconciling corporate credit card changes to ensure timely and accurate reimbursement and verifies payments to corporate credit cards. Collects and compiles data to provide visibility of status for traveler''s review and/or signature. Creates, edits and maintains electronic and written communication. Tracks and maintains information relative to department and business operations. Verbally communicates a wide variety of information to multiple audiences. Processes incoming and outgoing communication and correspondence to ensure proper dissemination of information. Prioritizes and schedules management-level employee time and availability for efficient use of time. Tracks and maintains designated conference room schedules for availability and efficient use of resources. Coordinates with the appropriate focal(s) to support the acquisition and maintenance of resources. Orders and maintains office supplies. Plans and implements logistics for executive level internal and external events. Provides guidance for less experienced employees. Works under limited supervision.

EDUCATION:
Accredited High school diploma or GED and typically 4 or more years related experience or an equivalent combination of education and experience.High School Diploma/GED

WORK HOURS:
Full-Time/First Shift 7:30 AM - 4:30 PM

 
Job Number: 174882
Job Location: Seattle, WA
Rate: $DOE
Duration: 3 MONTHS
Input Date: 11/02/2018
Last Updated: 02/19/2019
Firm Name: CHIPTON ROSS
Attention: Monica Juarez
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mjuarez@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Operations Technician

Description:
The ideal candidate for this position will perform the following tasks:
* Perform Final Visual Inspection and record keeping. Final Visual review for data collection, recording of 1st Pass Yield data, and maintaining the electronic technician product failure database.
* Services and troubleshoots the select products within assigned product team.
* Solves non-routine problems independently, seeking supervisory assistance when needed.
* Demonstrates ability to handle more advanced assignments.
* Subassembly and final unit testing IAW applicable test specifications.
* Records product movement on the Visual Queue charts as appropriate, maintaining 5S initiatives, Continuous Improvement and Lean Mfg flow initiatives as determined by the department supervisor and management team.
* Maintains 5S initiatives, Continuous Improvement and Lean Mfg flow initiatives as determined by the department supervisor and management team.
* Environmental testing and monitoring of product.
* Perform manual functional test and failure diagnosis to component level.
* Perform assembly and/or repair as needed on through hole, SMT, and hybrid assemblies. Requires the ability to read and interpret assembly blueprints, schematics, inspection criteria documents, etc. in performance of this duty.
* Performs other duties as assigned by the Operations Supervisor to ensure the needs of the team are met; areas may include but not limited to safety, morale, cost control, delivery schedules, problem resolution, and material shortages.
* Certify and retain all appropriate skills training certifications for related product acceptance stamp and/or job duties per SOPs 1811Q and 1211Q and as required by the Director of Quality.
* Responsible for maintaining reasonable and acceptable attendance.
* Responsible for performing job duties in a manner consistent with established L3 Policies & Procedures, Ethics Standards, and Sarbanes-Oxley regulations.
* Responsible for working a manner consistent with established safety rules and regulations and the use and maintenance of required personal protective equipment; including, but not limited to safety glasses, 50 volt exposure protection and area access control when 50 volt exposure is present, etc.

Mandatory Qualifications and Experience:
* Electronics Technician Certificate, BSEET or College Associates degree in an Electronics field or the equivalent formal training normally acquired through certified electronics coursework or military provided training, or a combination of education and relevant experience. Course work should include electrical theory, analog power and wave shaping circuitry, digital signal steering and microprocessor control circuitry.
* Troubleshooting to circuit card COMPONENT level is REQUIRED
* Three to five in a technical environment performing assembly/inspection (IAW IPC-A-610B Class 2 and/or Class 3) and test activities.
* Product tests require the knowledge and application skills to test products IAW applicable test specifications; operate and disseminate data associated with Acceptance Test Equipment, environmental equipment such as Temperature Chambers, Rate Calibration Tables, and ESS Thermal Shock Chambers, etc. Thorough knowledge of electrical theory, analog and digital circuitry, will be required to deploy the diagnostic skills necessary to test and troubleshoot circuit card assemblies to a component level.
* Must be able to earn and maintain the Final Test Stamp (FT) to the requirements determined by the director of Quality. This primary quality function reports indirectly to the Director of Quality and is subject to such quality audits as detailed in the Quality Manual.
* Must be able to earn and maintain the Final Visual Inspection rating through proficiency demonstration to the requirements determined by the area supervisor. * This function may require the person be available during periods of high production output, such as month end or to meet a customer delivery date, and thus may necessarily be limited in use of earned time off such as vacation to other times in the month.

The ideal candidate for this position will possess the following skills and characteristics:
* Able to read electrical schematics and analyze faulty circuits to identify, isolate, and repair to component level using ATE, Manual Panel or “lash-up” test equipment.
* Ability to setup and operate a variety of sophisticated electronics testing equipment
and follow procedural steps detailed in test specification documents.
* Good oral and accurate written communication skills. Must possess ability to accurately record detailed test data sheets.
* Good team skills, able to work within team setting and maintain a positive attitude,
and display a proactive team oriented approach to managing product flow through assembly and test, including filling in for absent assembly members when necessary to
maintain daily flow.
* Working knowledge of statistical process control as applied to assembly, inspection, and test processes and programs.
* Sufficient English language skills to be able to read and interpret documents such as safety rules, operating and maintenance instructions, and procedures manuals.
* Ability to write routine reports and complete required production paperwork.
* Ability to communicate effectively and convey ideas/information one-on-one and in group settings.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129041
Job Location: Grand Rapids, MI
Duration: 6 mos
Start Date: 11/05/2018
Input Date: 10/19/2018
Last Updated: 11/02/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

P-8A Non-Acoustic Sensor Operator - MD - C

Description:
Chipton-Ross is seeking a P-8A Non-Acoustic Sensor Operator located in Patuxent River, MD

RESPONSIBILITIES:
Contract to Hire Project Instructions
This is a contract to hire project

Primary Location: US-US-MD-Lexington Park

The P-8A Non-Acoustic Sensor Operator (EWO) will support airborne developmental testing of hardware and software for non-acoustic systems including radar, electro-optical, infrared imaging, electronic support measures, IFF, C4I networks, mission software and tactical common data-links. The selected candidate will perform aircrew duties as a member of the P-8A Integrated Test Team with Air Test and Evaluation Squadron Two Zero (VX-20) at NAS Patuxent River, MD. Candidate will be responsible for a variety of tasks that support P-8A flight testing, including participation in technical meetings, analysis of test requirements, test plan preparation, drafting detailed test procedures, conducting or supervising data collection in flight simulators, aircraft ground and flight environments, writing daily test reports, problem/deficiency reports and tracking. Flexible work hours may be required to support test activities. Most work will be conducted on-site at NAS Patuxent River, MD; however some travel will be required.

Past or current designation as a Non-Acoustic Systems Operator (EWO) in P-3C/P-8A aircraft is required.
Candidate selected must possess a minimum of 1000 hours in P-3C/P-8A or similar aircraft.

Current or former qualification as a P-8A Non-Acoustic Systems Operator (EWO) Instructor is desired. Flight designations current within 12 months of start date of employment desired. The position will allow various combinations of education and experience using a 1 year of education for 1 year of experience substitution.

Knowledge, Skills and Abilities: Applicant must possess extensive knowledge in the operation of airborne maritime environment Non-Acoustic Systems. Candidate must be able to pass the physical and training qualification requirements to provide contract aircrew support, including completion of Navy water survival and aviation physiology training, as well as annual FAA Class II flight physical. Candidate must be able to organize, demonstrate effective oral and written communications, and operate in a dynamic and fast-paced team environment. Candidate must be proficient with the Microsoft Office Suite (Word, Excel, and Power Point) and similar computer-based productivity applications. EOE/Minorities/Females/Vet/Disability Application Instructions For immediate confidential consideration, please apply online by clicking Apply Now to Join Our Team.

EDUCATION:
Accredited High School Diploma/GED and eight (8) years of related experience

A Bachelor's Degree in computer science, mathematics, physical sciences, engineering, or equivalent work related experience in Developmental Test, Operational Test, Fleet Introduction Team or Weapons and Tactics Unit is desired. Two years of systems integration and test experience with P-3C/P-8A Non-Acoustic Systems is desired.

WORK HOURS:
Full-Time/First Shift

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 172151
Job Location: Patuxent River, MD
Rate: $DOE
Duration: 4 MONTHS
Input Date: 06/27/2018
Last Updated: 02/19/2019
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Pricing Analyst

Description:
Be a part of a leading designer, integrator and producer of diagnostic, health management, rugged electronics, and energy management systems for combat vehicles and weapon systems for U.S. ground forces worldwide. Our client develops defense electronics to enhance combat vehicle performance, mobility, readiness, fuel efficiency, stealth capability, electric power and survivability. Enhance your own career by applying for:

Principal Pricing Analyst
Melbourne, FL
2018-7219

Review requests for proposals to identify and assist the proposal team in developing responses. Work with internal organizations to determine anticipated labor and overhead rates, material requirements, equipment costs, and possible bid strategies.

Responsibilities:
• Review RFP, RFQ, IFB or other solicitation requirements
• Participate in proposal meetings
• Analyze customer request focusing on pricing instructions & strategies, fee structure, pricing format, calculations for total evaluated price
• Develop schedule for cost inputs, Basis of Estimates due dates, supplier quote responses, and cost reviews
• Design pricing model(s) based on the solicitation requirements
• Conduct Pricing kick-off event
• Coordinate with technical estimators to ensure Technical Estimating/Scheduling requirements are met
• Ensure all BOEs are adequately supported
• Coordinate with Finance to ensure appropriate direct and indirect rates are utilized
• Consolidate functional estimates
• Conduct cost reviews along with Proposal Manager and Program Manager, ensures WBS is properly interpreted, resource data adequately supported and presents cost rationale to senior management for pricing approval
• Assemble the final cost estimates/pricing recommendations and submits them for final signoff
• Prepare and maintain cost proposal backup file which may include Supplier Quotes, e-mails, catalog information, engineering write ups and ERP historical data
• Assist Contracts Management in fact finding and negotiations with government contracting officers and auditors
• Involved in the development of manufacturing process plans, test requirements, and manufacturing flow, and capacity plans.
• Review detail designs for manufacturability and producibility.
• All other duties as assigned

Qualifications:
• Advanced Excel Skills, such as:
o vlookup
o Index/Match
o Pivot Tables
• Experienced at
o preparing Cost packages in accordance with FAR Part 15/TINA
o supporting DCAA/DCMA Audits
o pricing IDIQ, CPFF, FFP & T&M type proposals
o participating as Key Member of Negotiation Teams
o preparing Cost Volumes
o pricing services
o pricing Bills of Materials
o reviewing and analyzing complex, detailed solicitations
• Proficient in PowerPoint, and Word
• Prefer knowledge in a pricing software such as: Propricer, MPM, etc.
• Must be able to communicate verbally and in writing effectively.

Education and Experience:
• Bachelor’s Degree in Finance
• 8+ years directly related experience, preferably in a government contracting environment

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal, and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an affirmative action and equal opportunity employer.

Join a team that values your experience!
 
Job Number: 2018-7219
Job Location: Melbourne, FL
Rate: Based on experience
Input Date: 11/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Aaron Burrows
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Planner, Sr - Clearance AZ

Description:
Program Planner, Sr - Clearance (8647709)

Seeking a program management/planning professional to join the Program Planning & Scheduling Department within Missile Systems (RMS). The Sr. Program Planner position will be a member of the Program Management Excellence organization, supporting all RMS programs. The successful candidate will be responsible for the development, maintenance and analysis of the, the Integrated Master Schedule (IMS) and have knowledge of the Integrated Master Plan for mid complexity programs. Partners with the program team to ensure the cost, schedule and technical requirements are fully integrated and executed as planned. Provides weekly and monthly planning metrics on schedule status, baseline maintenance, critical path analysis, and schedule variance analysis and network logic validation. Performs Schedule Risk Analysis utilizing statistical software that provides the program team with the probabilities and risk areas in meeting program commitments. Employs Earned Value Management System processes and is an advocate in the discipline of program planning and scheduling. The candidate will be responsible for ensuring compliance with governmental and customer requirements. Duties will include: creating and maintaining compliant Integrated Master Schedules (IMS) that achieves necessary cost and schedule integration. Will perform the integrated planning and budgeting of tasks, to include analyses and reporting that will provide the programs with the visibility to make management decisions to ensure programs meet or exceed schedule commitments. Must be able to identify and recommend insightful mitigation plans, to ensure the IMS is used as a predictive model and as a valued management tool for the program. The candidate will incorporate contractual and programmatic changes into the IMS in order to maintain realistic current contract schedule baselines. The weekly and monthly business rhythms will require communication (electronically and verbally) of schedule status including but not limited to, results of critical path analysis, schedule variance analysis and the results of ‘what if’ exercises to the Program Manager, the customer and potentially to senior management. To be successful in this role the candidate must be able to develop strong relationships with Program Management, Finance, IPTs, CAMs and customer.

Required skills:
• 4+ years of applicable experience that included Program Planning and Scheduling
• Knowledge in the effective integration of schedule and cost in an EVMS environment
• Familiar with conducting Schedule Risk Analysis
• Demonstrated ability to interact professionally at all levels of management
• Strong communication skills, both written and verbal
• Experience using software designed for creating and maintaining industry related schedules. (MS Project, Primavera, Open Plan, or similar scheduling software)
• Act as a mentor (formal and informal) to team members Desired skills:
• Knowledge and experience in assisting IPTs in planning and scheduling
• Proficiency with planning applications
• Experience with Risk and Opportunity Management
• Six Sigma Specialist or similar certification
• Demonstrated ability to deliver customer focused solutions
• Strong communication skills, both verbal and written
• The ability to thrive in a deadline-oriented environment

Required Education: Bachelor’s Degree in Engineering, Accounting, Finance, Business or related field of study

Hours: 8:00am to 5:00pm
Location: Tucson AZ United States

Additional Job Details: This is not a supervisor role. Candidate must be a hands on worker
• Demonstrated ability to interact professionally at all levels of management
• Knowledge in the effective integration of schedule and cost in an EVMS environment
• Experience using software designed for creating and maintaining industry related schedules. MS Project.
• Knowledge and experience completing program IMP/IMS architecture

Contractor Work Week 9/80
Bachelor Degree Required? Yes
 
Job Number: MB-R8647709S
Job Location: Tucson, AZ
Rate: open
Per Diem: no
Duration: 6 months
Input Date: 10/16/2018
Last Updated: 11/29/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Project Control Analyst

Description:
Chipton-Ross is seeking a Project Analyst for a contract position in Rancho Bernardo, CA.

RESPONSIBILITIES:
Work with Project Managers, Control Account Management team (CAMs) and senior technical personnel to ensure uniform application of Earned Value Management procedures.
Assist management in program setup and control; establish and maintain cost/schedule baseline and enforce strict change control.
Assist in the development of Work Breakdown Structures (WBS) and related dictionaries.
Provide program planning support, including scheduling, budgeting, performance monitoring, variance analysis, status reporting, data validation, and resource planning.
Assist in preparation of Contract Performance Reports (CPRs), Estimates At Completion (EACs), and related variance analysis reports for customers and program management.
Track subcontractor status and material receipts, open commitments, and termination liability.
May assist in development of new business proposals.
Monitor and assure budget availability, proper approval authorization and charge accounts.
Provide task leaders and program managers with clear, timely and accurate information and make recommendations with which to make decisions.
Utilizes knowledge of MS Excel programming.
Conducts SQL/Access queries and codes VBA/HTML.
Assist in the development of Program Control procedures and desktop guides.
Utilizes experience with databases for dashboarding and metrics reporting.
Develop standard and ad hoc reports; identify issues, exceptions, and variances; develop solutions to moderately complex issues; follow GA-EMS processes and procedures to support business and regulatory agency requirements.

REQUIREMENTS:
**MUST have Earned Value Management (EVM) experience
- Utilize MS Office Suite and other applications that may include SAP, MPM, winsight, Project Server and SharePoint.
- Must possess two or more years of experience with Earned Value Management.
- Must be proficient in Excel: V-look ups, Pivot tables, etc.
- Prefer strong background in finance or accounting.
- Experience with DoD (DCAA/DCMA) compliance helpful.
- Must have general knowledge of accounting principles, planning and tracking procedures and manufacturing systems in a research or production environment.
- Possess good organizational skills.
- An effective communicator with the ability to write, interpret and explain programmatic issues.
- Knowledgeable and experienced with the following electronic software: word processing, spreadsheet, e-mail, and project management. Able to work extended hours and travel as may be required.

*Possibility for this contract role to transition to direct employment

EDUCATION:
Typically requires education al training equivalent to the completion of a bachelor's degree in business administration or a related discipline, along with three or more years of related experience. May substitute equivalent experience in lieu of education.

MISCELLANEOUS:
Mon-Friday. 5/40 work schedule
 
Job Number: 173697
Job Location: Rancho Bernardo, CA
Rate: $DOE
Duration: 6 mo
Input Date: 09/06/2018
Last Updated: 02/19/2019
Firm Name: CHIPTON ROSS
Attention: Lucas Medina
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmedina@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
We are looking for a Project Engineer in California! Submit your resume if you have the qualifications!

The ideal candidate for this position will perform the following tasks:
* Maintain requirements database tool (DOORS) and create necessary support infrastructure (e.g., scripts, configuration management, views, import/export)
* Maintain traceability between requirements and verification activities throughout product development lifecycle
* Lead efforts for defect tracking and correction, following good problem solving practices
* Project Management
* Manage day to day technical aspects of the project, including cross-functional decision making, task/schedule management, issue resolution/escalation, and communication.
* Manage cross project resource demand and work with functional managers to resolve gaps

Mandatory Qualifications and Experience:
* Bachelor's degree in related Engineering field from four-year college or university.
* 0-3 years of related technical experience and/or training.
* Demonstrated leadership capabilities.
* Strong background in MS Excel and VBA scripting
* Familiarity with DOORS tool and scripting
* Fundamental understanding of the system engineering “V”. Exposure to Electrical Power Conversion Testing and Test experience highly desired.
* Need experience in Agile environment
* Experience with Project Management tools
* Experience with Engineering Change Requests and Engineering Change orders

Desired Qualifications and Experience:
* DOORS is preferred
* Advanced technical degree preferred.
* Specific experience in electronic power conversion equipment development preferred.

The ideal candidate for this position will possess the following skills and characteristics:
* Outstanding written communication skills (e.g., technical document authoring).
* Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents.
* Must have ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community and ability to effectively present information to top management.
* Must have ability to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems.
* Must have ability to deal with nonverbal symbolism (formulas, scientific equations, graphs, etc.) and to deal with a variety of abstract and concrete variables.
* Must have the ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, permutations etc. to electrical/electronic design and analysis.
* Must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129137
Job Location: CA
Duration: 1 year
Start Date: 11/12/2018
Input Date: 10/30/2018
Last Updated: 11/02/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Location: Windsor Locks, CT
Rate: $62.00/HR
Duration: 1 year contract
Shift: 1st Shift
Overtime: Possible
Per Diem Split or Relocation: No


****MUST BE A U.S. CITIZEN****
****MUST HAVE A BACHELOR'S DEGREE****

Job Description:
Integrated Product Development (IPD) team lead, responsible for design, development and certification of space life support equipment. Responsibilities include managing a cross functional team through the design process, holding design reviews, managing documentation including customer data items, tracking schedules and budgets.

The Human Exploration & Launch business within ISR & Space Systems provides Environmental Control and Life Support Systems in deep space, low earth orbit, undersea, and on the ground. Our hardware is paramount to survival in harsh environments, and our passion for our work demands excellence in everything we do, from the talent we recruit to the highly-engineered systems we deliver. We value people, integrity, ideas and performance.

Requirements:
- Project Engineer with a background in Aerospace, Mechanical, Electrical or Chemical Engineering with 7 years minimum of experience in Space, Aerospace or Defense.
- Must have experience leading IPD Teams in the creation of new designs for aerospace, space or military products.
- Must have experience with SAP and understanding or processing hardware in concert with SAP.
- The Project Engineer will work per the direction of the Program Engineering Manager or designees to assist in team execution to plans.
- Skills and working knowledge of Project Management Body of Knowledge required. Facilitate and lead IPD Team with members from all functions.
- Planning, execution, coordination and communication of team activities and commitments
- Coordinate and status all IPD Team activities including requirements generation, development, design (including program planned reviews), procurement, fabrication and test.
- Work with IPD to create hardware development plans, coordinate hardware build effort in both the engineering labs and production labs.
- Ensure targeted goals (schedule and cost) is communicated to the team members
- Identify, assess and manage the team’s risks
- Hold/chair/lead weekly team meetings (or at intervals determined by the Program Engineering Manager (PEM) or Cost Account Manager (CAM)) to ensure holistic team effort within authorized scope. Ensure actions are document and driven to closure commitments.
- Perform Estimates to Complete (ETC) updating them progressively to ensure the team meets budgets and avoids scope growth and overruns.
- Meet design and design-to-cost requirements.
- Assist in administering Standard Work for the IPD Team including input of evidence of closure and status for all functions. Individuals are required to be energetic and lead team.
- Project Engineers shall work to Company Standard Work and Procedures.
- Notifying the PEM immediately of any potential scope or ETC growth before the work is executed.
- Assist in defining preliminary parts lists and coordinate decision making on long lead part procurements.
- Assist Control Account Managers with EVMS planning, performance, schedule and tracking.
- Must be comfortable using MS Project scheduling tools and comfortable with discussing performance to budget and creating cost and schedule recovery options and plans.
- Assist in creating program directives that define Earned Value Plans.
- Status plans and recommends corrective action to the Program Engineering Manager and/or Program Manager Work with operations to fabricate, assemble and test development and qualification and flight hardware.
- Coordinate, track and support development and flight hardware build and test.
- Initiate in scope engineering changes working with all functions to implement approved changes.
- This will include marking drawings, copying prints, creating PDF’s to support UTAS electronic EC processes.
- Document activities and programs worked with time spent on various activities.
- This information will be submitted weekly and summed monthly by person with the monthly invoice.
- Some limited program travel may be required.
- Overtime up to 12 hrs/week may be authorized
 
Job Number: 9416
Job Location: Windsor Locks, CT
Rate: $62.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 08/29/2018
Last Updated: 10/31/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer 1

Description:
The Project Engineer I is responsible for supporting other project engineers and the technical success of the small projects and tasks within the constraints of the allocated budget and schedule. The Project Engineer I role specifically is technical management and coordination of engineering to achieve compliance with customer technical requirements in the field of AC and DC Power Conversion and protection.

RESPONSIBILITIES:
System Engineering
* Maintain requirements database tool (DOORS) and create necessary support infrastructure (e.g., scripts, configuration management, views, import/export)
* Maintain traceability between requirements and verification activities throughout product development lifecycle
Lead efforts for defect tracking and correction, following good problem solving practices

Project Management
* Manage day to day technical aspects of the project, including cross-functional decision making, task/schedule management, issue resolution/escalation, and communication.
* Manage cross project resource demand and work with functional managers to resolve gaps

REQUIRED EXPERIENCE:
1. Strong background in MS Excel and VBA scripting
2. Familiarity with DOORS tool and scripting
3. Fundamental understanding of the system engineering V. Exposure to Electrical Power Conversion Testing and Test experience highly desired.
4. Outstanding written communication skills (e.g., technical document authoring).
0-3 years of related technical experience and/or training.
Demonstrated leadership capabilities.
Specific experience in electronic power conversion equipment development preferred.
- Need experience in Agile enviornment
- Experience with Project Management tools
- Experience with Engineering Change Requests and Engineering Change orders

EDUCATION:
Accredited Bachelor's degree in related Engineering field from four-year college or university.
 
Job Number: 174748
Job Location: Anaheim, CA
Rate: $30-45/hr
Per Diem: No
Overtime: Not specified
Duration: 12 mo
Start Date: ASAP
Input Date: 10/26/2018
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF / MW / Radar Engineer (656)

Description:
*This position is located 35 minute North of Philadelphia*

*Full benefit package and competitive salary are offered*



We are hiring for a full time permanent RF / Systems Engineer whose will be working with Military based Radar Warning/Situational Awareness/Electronic Attack and RF Countermeasure systems in addition to Interferometry/Direction Finding systems and on-/off-board systems. The applicant will need to create designs, perform simulations/generate circuit analysis for all system level requirements as well as RF components that fit into the overall project specifications, schedule, budget, reliability, and manufacturing ability.



Typical duties may include design/develop/simulate/analyze component technologies for transmitters, receivers, and converters applied to radar, communications, and ECM/ECCM sub-systems, generation of RF cascades, decomposing system requirements down to sub-system and component level requirements, generate/review specifications as well as block diagrams, interconnect drawings (ICD) and assembly drawings. Part of the responsibilities will be to conduct work plans, budget/schedule adherence, creation of technical deliverables within Government proposals.



Required:
*3-5 years’ experience as an RF Engineer, with particular experience working with antennas, receivers, transmitters, filters, or other similar hardware; Military or DoD experience a plus
*Experience in modulation techniques; antennas; correlation; or signal processing, particularly DSP.
*4 year engineering degree in a scientific, mathematical or preferably, engineering discipline.
*US Citizens only may apply; as applicants will need to apply and gain a security clearance upon starting.



Pluses:
*Familiar with broadband (including Octave to Decade) antennas/amplifiers; RF/MW/Radar integration and validation
*Experience architecting and designing and testing for radar, communication, or Electronic Warfare systems
*Knowledge of MIL STDs, DSP, radar/active electronically scanned arrays (AESAs), or electromagnetic interference mitigation
*Systems modeling with MATLAB or equivalent tools, DOORS requirements management tools, risk management tools
*Active Secret Clearance
 
Job Number: 656
Job Location: Lansdale, PA
Input Date: 01/15/2019
Last Updated: 01/22/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

RS Aircraft Component Repair Technician Sr

Description:

PDS Tech is looking for an RS Aircraft Component Repair Tech Sr. for an open position in St. Louis, MO

Working with a high degree of independence, provide leadership and technical guidance while performing the repair and overhaul of internal and external aircraft assemblies, subassemblies and components in accordance with GAC Repair Station requirements. 

Principal Duties and Responsibilities:



Essential Functions: 1. Mastery of advanced skills, procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. Duties and tasks reflect substantial variety and complexity. 2. Showing superior technical skill and competence, perform, instruct, and oversee repair of mech and elect assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, eng dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. 3. Set up and operate necessary test equipment in accordance with required doc to perform functional and operational tests of mech and elect acft components for return to service or for initial cert for new products. 4. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required maintenance data to ensure conformity requirements are met. 5. Showing superior tech skill, remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. 6. Demonstrate mastery of repair techniques and concepts using acceptable practices including troubleshooting, soldering and application of protective coatings. 7. Demonstrate expertise in use, maintenance, and calibration requirements of precision measuring and inspect tools. 8. Maintain and utilize all required paperwork in accordance with FAA Repair Station requirements. 9. Mastery of shop material and component flow through via work orders in accordance with Repair Station requirements. 10. Comply with all company and legislative environmental health and safety regs. 

Additional Functions: 1. Lay-out, remove, fabricate and/or install major and minor repairs to flight controls and other secondary structure components using honeycomb core sandwich construction techniques, composite repair techniques, test bench procedures, hydraulic press procedures, and servicing carts. 2. Fabricate and repair sheetmetal and associated mech parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mech means. 3. Remove & install APUs and perform all required APU maintenance for ALL GAC acft models. 4. Provide tech support to Customer Support Coordinators and Tech Services. 5. Perform complex troublehshooting and subsequent repairs to electronic assemblies and subassemblies by removing and replacing circuit components, either through hole or surface mount, using acceptable soldering and circuit repair techniques. 6. Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. 7. Perform, in conjunction with QC Reps, mass weight and balance on repaired flight controls using blueprints and required FAA Repair Station forms. 8. Assist with training Acft Component Repair Techs. 9. Performs other duties as assigned.



 



Education and Experience Requirements:




  • HS diploma or GED.
  • A&P license, FCC license, or NCATT cert preferred.
  • Able to read & interpret blueprints, eng docs, CMP data, CBs and ASCs.
  • Proficient in operation of all tools & equip in dept.
  • Basic understanding of shop math.
  • 6 yrs experience in one of the following or related exp: Sheetmetal and/or hydraulic overhaul. Avionics/elect compo repair, accredited schooling in electronics and elec sys may offset some exp reqmts. APU removal, install, and service.
  • Tools required at this facility.


 


 

 

 
Job Number: 1810094675
Job Location: East Saint Louis, IL
Per Diem: No
Duration: 6 months
Input Date: 10/31/2018
Last Updated: 02/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qxtQQAQ&URLSource=cjhunter

RS Avionics/Elec Tech II

Description:
PDS is seeking a Avionics/Electrical Technician II for an open position in Brunswick, GA.

Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:

Essential Functions: 1. Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. 2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. 3. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. 4. Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. 5. Performs and complies with engineering changes and modifications as required. 6. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. 7. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. 8. Tests and maintains test equipment, electronic systems, and components. 9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. 10. Adapt to sudden schedule changes. 

Additional Functions: 1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 2. Performs other duties as assigned. 
 


 

Education and Experience Requirements:

High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Four (4) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.

Unique Skills:



Unique skills: Required Experience with Avionics software loads and aircraft maintenance interfaces.

Other Requirements:
1. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. 2. Ability to read and interpret basic blueprints and schematic diagrams. 3. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. 4. Must be able to climb stairs and ladders, work in confined areas and lift up to 80 pounds.
 


 
Job Number: 1810083669
Job Location: Brunswick, GA
Duration: 6 months
Input Date: 04/03/2018
Last Updated: 02/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mKIRAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer (FRACAS) (501)

Description:
*This is a full time, 1 year contract to hire position, located in York, PA*



We are seeking a contract Reliability and Maintainability (RAM) engineer who will be performing high level math and risk analysis of aerospace models/systems designs that ensure maximum availability and sustainment. Candidate will be using functional Failure Modes Effects and Criticality Analysis (FMECA) and FRACAS to reduce or eliminate risk, using failures modes to assess improvements and update analysis by evaluating test results.



Daily use of block diagrams, Test Incident Reports (TIRs) input into the Failure Reporting Analysis and Corrective Action System (FRACAS) database, working with staff to unearth potential failure modes and mitigate, while tracking modifications to assist in assessing program success. Will use Reliability Enhancement Testing (RET) and reliability demonstration testing.



Required:
*2 years’ experience in Reliability, typically RAM or RM&T, analyzing data sets and identify high drivers.
*Experience performing allocations/predictions, FMECA and FRACAS.
*Familiar with reliability software tools (preferably WQS)
*Understanding of mechanical, electrical, electronic and hydraulic engineering.
*4 year degree in Engineering, Math or other Science



Pluses:
*Knowledge of WQS software
*Familiar with Specialty RAM-T disciplines.
*ASQ Certification
 
Job Number: 501
Job Location: York, PA
Input Date: 01/15/2019
Last Updated: 01/22/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

STRAIN GAGE APPLICATION TECHNICIAN

Description:
JSG is seeking an Instrumentation Specialist Lead for a 15+ months contract opportunity in West Palm Beach, FL!

Description: Strain Gage application Technician:

The successful candidate shall meet the following requirements:- High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 15 Years or more of experience.- Minimum of 10 years’ experience in the field of strain gage application to support test instrumentation -Experience and ability to accomplish required surface preparation, strain gage measurement, layout, alignment and bonding. Experience with measurement systems, instrumentation wiring, documentation, and Wheatstone Bridge wiring of strain gages to measure Torque, Axial Load, Bending and Shear strain.
Experience troubleshooting and repairing strain gage measurements. - Familiarity with electronic tools such as multi-meters, oscilloscopes, logic analyzers, etc.- Solder/de-solder experience required.
Experience reading wiring diagrams and interpreting schematics and engineering drawing.
Manages building and maintenance of instrumentation systems for Flight Test programs to provide measurement data required by the Engineering Department. Apply instructions prepared by aircraft technicians in the form of travelers, Assist in the preparation, installation, check-out and operation of instrumentation systems, follow planned maintenance / calibration, and standard operating procedures for all instrumentation and control equipment in order to maintain accuracy of data and ensure its validity, and operate DAS (data acquisition system) and other recording equipment.
 
Job Number: 367131
Job Location: WEST PALM BEACH, FL
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 08/31/2018
Last Updated: 02/15/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Engineer - FPGA and Digital Design

Description:
Location: Westminster, CO or Boulder, CO
Duration: 6 months contract to hire
Openings for Senior and Principal Engineers
Description:

•Work collaboratively and in tandem with FPGA verification engineers.

•Establish and maintain effective working relationships within the department, the Strategic Business Units, Strategic Support Units and the Company. Interact appropriately with others in order to maintain a positive and productive work environment.

Requirements:

•BS degree or higher in Engineering or a related technical field is required plus 5 or more years of related experience.

•Ability to own entirety of designs and understands radiation affects and FPGA.

•Expertise in VHDL.

•Experience with Xilinx Vivado.

•Experience with Spacewire, microsemi, and Vertex 5.

•Strong preference for Aerospace experience because of the need to follow peer structure, documentation, peer reviews etc.

•Each higher-level degree, i.e., Master’s Degree or Ph.D., may substitute for two years of experience. Related technical experience may be considered in lieu of education. Degree must be from a university, college, or school which is accredited by an agency recognized by the US Secretary of Education, US Department of Education.

•Strong Verification development methodology and test-benching for FPGAs.

•Strong software engineering skills, experience with System Verilog and OVM/UVM, C/C++, object-oriented design, and familiarity with electronic circuit design and electronic systems.

•A solid understanding of object-oriented concepts and experience designing class-based constrained random testbenches.

•Knowledge and experience with Windows, Unix and scripting languages (e.g. Ruby, Python, TCL) is a plus.

•Experience in documentation and verification of high-speed digital electronics, FPGAs, and embedded processor systems is desired.

•Ability to develop specifications, cost, schedule, and resource requirements for FPGA or ASIC verification plans.

•Military experience and/or ability to get a security clearance highly desired, but not required.
 
Job Location: Boulder, CO
Rate: DOE
Per Diem: Possible Split
Overtime: No
Duration: 6 month contract to hire
Start Date: ASAP
Input Date: 10/26/2018
Firm Name: ALLEGIANCE CONSULTING INC
Attention: Scott
Address: 10822 W TOLLER DR STE 250
City, State: LITTLETON, CO 80127
Phone: 720/947-9208
Website: www.acinow.net

Senior Engineer, EEE Parts and Radiation - AL

Description:
Chipton-Ross is seeking a Senior Engineer, EEE Parts and Radiation for an opening in Huntsville, AL.

RESPONSIBILITIES:
In this role, you will play a key role in the component engineering group supporting new andexisting spacecraft propulsion programs. Proficiency in radiation effects, survivability engineeringdesign, and test methods used to assure electronic components are compatible with operation inspace radiation environments expected.
50% - Provide Radiation Analysis expertise. Assess customer radiation requirements and develop derived radiation requirements for EEEparts. Create models to assess radiation risk of EEE parts. Generate and submit radiation risk assessment reports. Support radiation risk mitigation efforts. Evaluate new devices for radiation performance. Develop radiation test plans at the EEE part level and support test execution.25% - Support design teams in the selection, evaluation, and documentation of EEE parts. Create detailed part drawings which meet customer requirements. Review parts lists and ensure selected parts comply with customer requirements. Generate Non-Standard Part Approval Requests (NSPARs).15% - Lead investigations of failed components. Use industry standard failure investigation processes to determine root cause of failures. Generate failure investigation reports and recommend effective corrective actions to preventrecurrence of failure.10% - Mentor junior team members.

REQUIRED EXPERIENCE:
Advanced knowledge of semiconductor physics, radiation effects on semiconductor devices,circuit design, and electronics testing. Knowledge of radiation effects (TID, ELDRS, SEE). Experience with radiation effects simulation software. Advanced knowledge of applicable industry practices and standards in EEE parts and radiationeffects. Experience with formal problem solving and failure analysis tools and techniques. Experience working an equivalent engineering environment is desired.

EDUCATION:
Accredited Bachelor's degree in Electrical Engineering, Physics or related field and 5 years of related experience (or an equivalent combination of education and experience).

WORK HOURS:
9/80
Full-Time

 
Job Number: 174482
Job Location: Huntsville, AL
Rate: $DOE
Duration: Direct
Input Date: 10/12/2018
Last Updated: 02/19/2019
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

Sensor and Systems Technician - MD - C

Description:
Seeking Sensors and Systems Technicians to join its Assembly team within the Manufacturing organization. These positions are located in Linthicum, Maryland.

The Sensors and Systems Technician will perform a variety of simple to complex tasks involving testing, operating, trouble-shooting calibrating, constructing, repairing and assembly over a broad spectrum of technologies, utilizing manual and automatic equipment, Utilize and create repair techniques, assembly techniques and procedures. Other tasks to be performed include: collecting, recording, analyzing and evaluating data and recommending changes in processing operations and equipment as appropriate.

RESPONSIBILITIES:
" Test technician, testing assemblies for radar systems.
" RF testing
" Verifying that the assemblies meet the requirements of the drawings.
" Troubleshooting down to the component level
" Assisting engineering in creating designs and design changes
" Will be involved in test set ups, systems and device repair of faulty areas
" Will be using network analyzers, spectrum analyzers, power meters, signal generators, O-scopes

Requirements:
" Minimum of an associate's degree in electronics. Bachelor's in electronics is acceptable. Must have a minimum of 60 credits.
" If they don't have an AA degree, they can have 6 months of military training in electronics.
" Must submit either academic transcripts or military documents (DD-214, Joint Service Transcript, SMART transcript, or VMET) showing that they meet the education/training requirement.

EDUCATION:
Minimum of an associate's degree in electronics. Bachelor's in electronics is acceptable.
Electrical engineering typically isn't accepted.
" If they don't have an AA degree, they can have 6 months of military training in electronics. Typical occupations in the military that would meet this would be (*** indicates the most ideal):
o Electronics Technicians/ US Navy "A" school or Radar "C" school***
o Avionics Technicians/ Aviation Electronics Techs***
o Fire-controlman
o Sonar Technicians
o Ground Radio Operators/Repairman
o Air traffic control tech


Other info:
" Multiple shifts available-2nd (3:30 PM -Midnight), 3rd (11PM-7:30 AM), 4th (Friday-Sunday 7AM-7PM) and 5th (Friday-Sunday 7PM-7AM). Candidates must be able to work one of these shifts.
" Paid OT, 1.5x Mon-Sat, 2x on Sun.
" Shift differential for working 2nd or 3rd shift.
" Must be comfortable being a part of a union

Test:
" Candidates must pass a technician test prior to interviewing. Candidates should have knowledge of these topics.
" Test is administered at our BWI site in Linthicum, MD where the position is located. It starts at 8 AM and goes until 3 PM. If they pass, they will interview with the hiring manager right after the test.
" For non-local candidates, client will coordinate their travel and cover the expenses.
" Our next test dates are 3/1, 3/15, 3/22, 3/29

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 168820
Job Location: Linthicum, MD
Rate: Up to $30.00 DOE
Duration: Direct
Input Date: 03/06/2018
Last Updated: 02/19/2019
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Software Engineer

Location: Riverside, CA
Pay Rate: $36/hr
Duration: 1 year contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**NO RELOCATION COMPENSATION/NO PER DIEM SPLIT**

Description:
Experienced level Software Engineer Supports multidisciplinary research and collaboration with Milling, Robotics and Laser equipment designers and/or hardware engineers in the design, development, and utilization of electronic data processing systems software.

Additional Job Details:
Basic Qualifications:
-Bachelors degree required
• Fluency in VB Scripting, coding, databases, queries, SQL, or other common programming methods
• Proficient in Microsoft Office: B.I., Access/Excel/Powerpoint, & Python, Java
• Experience in automating adhoc reports from SAP (BEX,WEBI)
• Must be able to work effectively in a team environment
• Must be able to meet time critical deadlines and on rare occasions work weekends
 
Job Number: 10061
Job Location: Riverside, CA
Rate: 36
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/01/2018
Last Updated: 11/13/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance

Description:
Job Description:

The Test Systems Solutions Center (TSSC) applies a systems approach to provide total test solutions that ensure the quality of Client Missile Systems (RMS) products. The TSSC uses common platforms and processes to design/develop production, depot and engineering test stations.

Opportunities include:
•Domestic and international travel
•Innovative rapid prototyping
•Supporting live-fire testing of our products
•Designing, developing or using commercial software for simulation and test equipment environments
•Designing, developing or integrating methods and equipment to effectively test systems.

RMS – Systems Test Directorate is seeking an Engineer for the TSSC.
The selected candidate will participate on multidiscipline engineering teams performing design, development and integration of RMS test products within TSSC. Typical work involves the development of both engineering and production test equipment, environments and systems. As such, the candidate will contribute to the completion of all stages of test product development, and will be responsible for performing technical, cost and schedule management of their assigned projects. They will be expected to act, either as a part of their team or independently, to uncover and resolve issues associated with the development and implementation of test products.
This position is focused on, but not limited to, the design, development, integration, test, and maintenance of software for TSSC. The selected candidate will develop applications, libraries, and instrument drivers using the software style, development language, and integrated development environment specified by TSSC.

Required Experience:
Requires a Bachelor of Science degree in Science, Technology, Engineering or Mathematics (STEM)
This position requires the eligibility to obtain a security clearance. Except in rare circumstances, only U.S. citizens are eligible for a security clearance.
Professional engineering experience developing and implementing high order programming languages (C#, C++, or C is preferred) is required.

Must have a:
•Professional engineering experience utilizing integrated development environments and debugging tools to troubleshoot software implementation and ensure integrity of the software products (experience with Microsoft Visual Studio is preferred).
•Knowledge of developing requirements for software products.
•Experience using model based design and the Unified Modeling Language (UML) to visualize software architecture and design.
•Familiarity with IBM Rhapsody or Cameo Enterprise Architecture is preferred.

Desired Skills:
•Master of Science degree in Science, Technology, Engineering or Mathematics (STEM)
•ABET is the preferred, although not required, accreditation standard
•Working knowledge of computer architecture and computer hardware optimization techniques.
•Experience with the development and integration of software drivers for the operation of computer hardware interfaces.
•Knowledge in common computer hardware interface and data protocols such as TCP/IP, UDP, RS-422 (experience with Microsoft Windows operating systems is preferred).
•Experience developing automated test systems (familiarity with National Instruments (NI) TestStand is preferred).
•Experience with laboratory test instrumentation, electronics and software (experience with NI VISA, NI Measurement and Automation Explorer, or NI Switch Executive is preferred).
•Experience prioritizing and handling multiple tasks in a production environment, developing solutions under only general direction, and demonstrating solid troubleshooting skills.
•Professional engineering experience working within a team environment.
•Strong written and interpersonal communication skills.
•Knowledge of Software Configuration Management principles, environments and tools.
•Knowledge in computer scripting language such as MATLAB/Shell/Perl/Python.
 
Job Number: 001
Job Location: Tucson, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 06
Start Date: ASAP
Input Date: 10/26/2018
Firm Name: INTELLISWIFT SOFTWARE INC
Attention: Sheik Sikkander
Address: 39600 BALENTINE DR STE 200
City, State: NEWARK, CA 94560
Phone: 510/370-2600
Website: www.intelliswift.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Technical Illustrator

Description:
Sr. Technical Illustrator prepare, construct, and revise of Orthographic illustrations, Axonometric projections, Wiring and Schematic diagrams for technical aircraft manuals and other related graphical publications utilizing electronic methodology. Must create and manipulate graphics and using MicroStation and CADAM technical illustrating system. Must be functionally literate with 3-dimensional graphics, surfaces, wiring frames, and solids. Experience with EWIS (Electrical Wiring Interconnection System) best practices, S1000D Technical Publication Specification, STE (Simplified Technical English), and PLM (Product Lifecycle Management) database experience desired


Sr. Technical Illustrator prepares, construct and revise MicroStation data (3-D, and 2-D data). 2. Prepare, construct, and revise orthographic illustrations, axonometric projections, and Wiring/Schematic diagrams on MicroStation. 3. Determine optimum graphic approach; independently prepare master artwork, charts, visual, booklets, and signs, working with all aspects of graphic arts production by utilizing electronic illustrating equipment. 4. Work with engineers, technical writers, customers, vendors, and suppliers to effectively visualize and conceptualize graphic design problems to include technical as well as non-technical graphics, color separations, overlays, and comprehensive type requirements. 5. Ensure illustrations conform to corporate, ATA 100, FAA, and commercial aircraft technical manual specifications and company style requirements. 6. Maintain up-to-date knowledge of artwork techniques, materials, and equipment. 7. Experience working with equipment related to and associated with electronic illustrating tools, including: High-resolution scanners, PCs and related illustration software, printers, general knowledge of electronic publishing systems, related printers and data requirements. Perform other duties as assigned.

 Sr. Technical Illustrator has the ability to read and interpret wiring schematics, blueprints and engineering orders. 2. Background familiarity with CADAM, Catia, and CCD. Mainframe user level operations, networks, and scanners. SmarTeam experience a plus. 3. Knowledge of import/export of data files such as: (.dxf, tiff, .cgm, and iges) and electronic publishing are desirable qualities. 4. Knowledge of 3-D modeling and animation. 5. Working knowledge of Right Hemisphere software. 6. Video, motion or animation graphics experience a plus.

Bachelor's Degree required or equivalent combination of education and experience. 4 years exp in electronic technical illustrating. Ability to operate Micro-Station, Adobe Illustrator and other Adobe illustration software.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/27/2018
Last Updated: 12/28/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Sr. Quality Engineer - OH

Description:
Chipton Ross is seeking a Sr. Quality Engineer for an opening in Brookpark, OH

RESPONSIBILITES:
95% - Coordinate, lead and provide direct oversight in support of both Client customer(s) and suppliers in support of clients Advanced Electric Propulsion (EP) and Power system product area. Interface with process senior peers and program leads on tactical and strategic initiatives to improve schedule and cost execution.

5% - Provide input to clients EP and Power systems programs personnel with initiatives and ideas that can reduce cycle time, improve yield, and reduce QA associated costs.

REQUIREMENTS:
Strong Quality Management System, Quality principle and mission assurance acumen in an aerospace and/or defense environment.
Background, experience and knowledge with AS9100 certifications and have worked with suppliers certified to AS9100
Preferred certification and or knowledge/training to J-Std-001 space addendum
Preferred certification and or knowledge/training to NASA-STD-8739 Knowledge on auditing or performing source inspections
Experience with electrical and electronics design, assembly, inspection, and testing
Experience in leading employees across multiple QA disciplines
Knowledge of statistical process control (SPC) Strong written and communication skills.
Customer savvy and ability to address and drive proactive action when required.

EDUCATION:
Bachelor's degree in electrical engineering, mechanical engineering or physics with 10 -15 years of experience working with NASA Glenn.
Should have a good understanding of Electric Propulsion.

WORK SCHEDULE;
5/40, 1st Shift

 
Job Number: 174096
Job Location: Brookpark, OH
Rate: $DOE
Duration: 12 months
Input Date: 09/25/2018
Last Updated: 02/19/2019
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Verification Design Engineer / FPGA VHDL NY

Description:
Request number: 5658

Job title: Verification Design Engineer
Number of openings: 1

Position location: East Aurora - NY
Employment type: Contract
OT exempt: No

Shift: 1st
Education Requirement: BS/BA

Driving on company time?: No
Maximum Hourly Pay Rate: 70
Start Date: 10/22/2018
Tentative End Date: 10/21/2019


Function:
As a Senior Design Engineer you’ll need extensive experience in creating successful designs of electro-hydraulic, electro-mechanical, electro-hydrostatic and/or electro-pneumatic servo control systems or similar systems to be successful. Your broad background in digital and analog electronic design, including circuit design and analysis, FPGA and ASIC design and verification, and circuit integration, debug, and control theory is essential. You’ll plan and conduct efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria.

In this position you’ll be expected to:
Develop new product requirements through consulting with customers and sales
Validate conceptual problem solutions by performing trade studies and analyses
Be a key contributor to a design proposal team in preparing a design, estimating costs, and assisting in writing the technical volume

Operate effectively as a key element in a team of creative, independent individuals, soliciting and being sensitive to design feedback

Create reliable designs through a comprehensive experimental development test program
Document designs, analyses, and test results with accurate and concise reports
Consult on new product and market development efforts

Maintain currency with electronic technology, industry design requirements (Military, FAA, NASA, etc.), and modern design implementation and analysis tools
Represent in a manner consistent with its technical reputation

Required skills:
At least a BS degree in engineering (preferably MS degree).

At least 10 years of relevant electrical engineer and FPGA and/or ASIC design experience.
Experience with FPGA/ASIC VHDL design.
Experience with other design or verification languages is a plus.
Experience with VHDL based test benches, code coverage metrics, FPGA constraint generation, and timing closure.
Experience with FPGA/ASIC designs for control loops and fix point integer math.
Experience designing with and interfacing FPGAs/ASICs to ADCs, DACs, LVDTs, temperature sensors, and common standard communication busses.
Experience with configuration control and change management tools and processes.
Experience generating formal design documentation and generating and delivering formal presentations to a customer.
Experience with requirements management and deriving lower level reqts from system specifications. Experience with the DOORs a plus.
Experience performing formal verification of the design to customer requirements.
Experience designing for motion control and motor control applications is a plus.
Experience with FPGA/ASIC design lifecycle processes and coding standards
 
Job Number: MB-5658
Job Location: East Aurora, NY
Rate: 70/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/19/2018
Last Updated: 12/19/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical Engineer (779)

Description:
CSS Staffing is seeking an Electrical Engineer with experience in designing and integrating various electrical/electronic components and vehicle architectures related to power generation, power distribution, cabling, and communication equipment. Candidate should have experience using lab test equipment, such as oscilloscopes, power analyzers, CAN bus diagnostics tools, data acquisition and LabVIEW for test and verification, as well, as electrical schematic captures and simulation tools like SPICE.

Required Skills
*5 years of experience designing and integrating electrical/electronic components in vehicles.
*Experience with electrical cabling, power generation, distribution, energy and fire control to the sub-system level.
*Working knowledge of CAN bus and Ethernet.
*Experience with SPICE simulation tools.
*BS/MS in Electrical Engineering or Computer Engineering
 
Job Number: 779
Job Location: San Jose, CA
Input Date: 12/03/2018
Last Updated: 12/12/2018
Firm Name: CSS STAFFING
Attention: Shay Rosen
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical/Vetronics Design Engineer

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Sr. Electrical/Vetronics Design Engineer
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-7230

Join our Engineering team to design and develop Electrical/Vetronic architecures for ground combat vehicles. Your work will entail everything from first concepts, to the development and deployment of these advanced systems. The designs may range from semi-autonomous to fully autonomous capabilities leveraging the latest in industry.

Responsibilities:
• Perform system analysis and derive Electrical/Vetronic Architectures that meet or exceed system requirements
• Concept to production delivery support including design, debug, test, and qualification of design articles
• Design and develop Electrical Components, LRUs and Subsystems for processor, I/O, and display products
• Construct and design new control solution(s), familiarity of design concepts and approaches to motion control and fire control applications
• Perform system, subsystem, & LRU-level requirements analysis as relates to weapon motion control, identifying interfaces & required functionality
• Design, develop and support circuit design, component selection, procurement, and prototype hardware debug and builds
• Review and develop H/W and S/W requirement documents and test plans

Qualifications:
• Broad based knowledge of electrical systems, system/subsystem, hardware, and software requirements
• Proven and demonstrated experience with integration of electrical / electronic components and associated software/hardware into ground combat vehicles
• Experience with network-based vehicle (combat or automotive) architectures
• Experience trouble shooting Vetronics systems required
• Experience with link-based (e.g., CAN) diagnostic systems required
• Experience with J1939 CAN protocol
• Experience with SIL and vehicle-based Vetronics testing
• Familiarity with TCP/IP and UDP protocol
• Ability to use engineering development and test tools
• Strong interpersonal skills and ability to work with interdisciplinary teams
• Strong multi-tasking skills
• Understanding, familiarity and development of system, subsystem level requirements (SSDD, SRS, Schematics, Vetronics Architectures, ICDs, etc.)
• Understanding and development of vehicle & subsystem-level integration and test plans
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s degree in Electrical Engineering or related engineering field and 6+ years of experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7230
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 11/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Sallye Smith
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Electrical Engineer

Description:
PDS Tech, Inc. is seeking an Staff Electrical Engineer, in Phoenix, AZ.

•The Staff Electrical Engineer will work with a global team of engineers in Phoenix and India, on electronic control units for aerospace applications.
•The role will support the entire design life cycle from project planning efforts to entry into service and production transition support.
•Requirements definition using DOORS, detailed design, validation of requirements and verification of implementation.
•Also includes managing Problem reports for hardware that has already been delivered.
•The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and works well in a team environment.
•As a Staff Electrical Engineer, this role will lead and mentor other electrical engineers throughout the entire design life cycle and support project planning efforts and ensure execution to schedule and budget.

Education
•BS degree in Electrical engineering, with 6+ years of experience, a Master's degree preferred.
•US Citizenship.

Basic Qualifications
•Design responsibilities include architecture, development and analysis of: high speed digital systems comprised of microprocessors, microcontrollers, DSPs, FPGAs and high speed communication links.
•Create documentation including hardware design plans, technical requirements, functional specifications, design specifications, qualification test plans and reports.
•Support current production designs including quality improvements, cost reduction, component obsolescence and failure analysis.
•Evaluate and approve electronic components to meet requirements for availability, performance and cost.
•Support project planning efforts and ensure execution to schedule and budget.
•Evaluate failures to determine root cause and corrective actions.
•Interface and support validation, verification and manufacturing engineers and technicians with product and manufacturing testing.
•Apply knowledge of DOE, FMEA, tolerance analysis, simulation and statistical methods to improve robustness and quality of electronic designs.

Preferred Qualifications
•Experience with high reliability controller electronics and power switching circuitry.
•Strong experience in hardware and firmware developed in accordance with the requirements of DO-254 (DAL A).
•Familiarity with software developed in accordance with the requirements of DO-178B or DO-178C Level A.
•Experience working in Cadence Sigrity.
 
Job Number: 1810093238
Job Location: Phoeniz, AZ
Per Diem: Split
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 11/07/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Electrical Engineer

Description:
Staff Electrical Engineer

Location: Phoenix, AZ
Pay Rate: $68/hr
Duration: 12 month W2 contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**NO RELOCATION COMPENSATION**

-The Staff Electrical Engineer will work with a global team of engineers in Phoenix and India, on electronic control units for aerospace applications.
-The role will support the entire design life cycle from project planning efforts to entry into service and production transition support.
-Requirements definition using DOORS, detailed design, validation of requirements and verification of implementation. Also includes managing Problem reports for hardware that has already been delivered.
-The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and works well in a team environment. As a Staff Electrical Engineer, this role will lead and mentor other electrical engineers throughout the entire design life cycle and support project planning efforts and ensure execution to schedule and budget.
-BS degree in Electrical engineering, with 6+ years of experience, a Master's degree preferred.

Basic Qualifications
• Design responsibilities include architecture, development and analysis of: high speed digital systems comprised of microprocessors, microcontrollers, DSPs, FPGAs and high speed communication links.
• Create documentation including hardware design plans, technical requirements, functional specifications, design specifications, qualification test plans and reports.
• Support current production designs including quality improvements, cost reduction, component obsolescence and failure analysis.
• Evaluate and approve electronic components to meet requirements for availability, performance and cost.
• Support project planning efforts and ensure execution to schedule and budget.
• Evaluate failures to determine root cause and corrective actions.
• Interface and support validation, verification and manufacturing engineers and technicians with product and manufacturing testing.
• Apply knowledge of DOE, FMEA, tolerance analysis, simulation and statistical methods to improve robustness and quality of electronic designs.
• It is desirable that the candidate has experience with the activities listed below for Highly Complex COTS components operating in the GHz bus frequency range.
a. Digest vendor SOC documentation (data sheets, user manuals, app notes, errata, …) to develop constraints and requirements for H/W implementation
b. Effectively work with the software team to develop configuration register settings
c. Perform shared resource analysis
d. Perform configuration settings and failure analysis e. Knowledge of accommodation/mitigation techniques for undocumented features, vendor micro code, configuration fault anomalies
e. Perform programmable logic requirements definition
f. Knowledge on component selection and trade studies
g. Capable of programming code on development boards for design and initial board functional checkout
h. Perform power sequencing analysis Experience with the full DO-254 aerospace hardware development and certification lifecycle including: electrical architecture design, requirements analysis & development, electrical design, development & integration, and qualification testing (DO-160, MIL-STD-461, MIL-STD-810).
 
Job Number: 9946
Job Location: Phoenix, AZ
Rate: 68
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/09/2018
Last Updated: 11/21/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Structures Design Engineer will serve in a design role and be responsible for conceptual design, developing drawings and supporting documents i.e. parts list checklist, EOs. Will support design reviews and PDRs/CDRs. Looking for candidates who want to be part of a core design team as opposed to someone who is only interested in pumping designs.

Successful candidates will have experience creating designs from conception through completion.

7 Engineers needed

Duties and Responsibilities:
• Generates engineering models, drawings, parts list and EO utilizing CATIA V5
• Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
• Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development.
• Familiarity with structural analysis methods, load paths, and material properties
• Manages task execution to ensure on-time and on-target completion
• Perform tolerance and deviation studies. Define detail parts dimensional requirements to meet final design intent.
• Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producability
• Working knowledge of composite aircraft construction including primary and secondary structure
• Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions

Education, Work Experience, Certification and/or Licensure:
1. Minimum of 6 years to a maximum of 14 years aviation experience; 3+ years of experience working with integrated aircraft avionic/electrical systems in the areas of design engineering, system analysis, and system test.
2. Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronic Engineering.
Knowledge, Skills and Abilities:
1. Familiarity of avionics/electrical design requirements of 14CFRPart 23.
2. Proficiency in writing technical documentation and reports involving test data and analysis.
3. Familiarity with avionics/electrical test laboratories and lab equipment.
4. Working knowledge of system qualification requirements including DO-160F/G for environmental, DO-178B for software, and DO-254 for complex electronic hardware.
5. Familiarity with SAE ARP 4754 and ARP4761 desirable.
6. Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required.
7. Proficiency in requirements management tools such as DOORS, PLM tools such as TeamCenter and SAP is preferred.
8. Ability to manage and complete complex work assignments.
9. Ability to work independently and within a multi-functional team environment.
 
Job Number: 28-028
Job Location: Greensboro, NC
Rate: Up to $60
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 09/26/2018
Last Updated: 11/14/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supplier Quality Engineer (760)

Description:
CSS Staffing is seeking an experienced Supplier Quality Engineer to ensure our suppliers produce products which meet all Systems requirements. The successful candidate will investigate, evaluate, and resolve supplier quality problems by conducting audits, analyzing defect trends, and leading continuous improvement projects. The Supplier Quality Engineer will conduct capability assessments that verify supplier qualifications, travel to assigned suppliers, and lead multiple projects to completion. Expected travel is approximately 50%. This will be mostly local day trips with some overnight travel in the region. Additionally, you will: Utilize supplier Scorecards/metrics and analytical tools to quantify performance levels of individual suppliers and work with those suppliers to develop improvement plans to achieve 100% quality performance. Evaluate the impact of nonconforming product and assess suppliers’ corrective actions. Perform Source Inspection of product at supplier locations. Perform and Evaluate First Article Inspections per the requirements of AS9102 as well as train suppliers to meet expectations



Required Skills

*5+ years of relevant work experience in Supplier Quality Engineering

*Experience in an Avionics or Defense Electronics contract environment

*Working knowledge of AS9100 Quality Management System and AS9102B First Article requirements. *Experience with electrical/mechanical inspections, product test, equipment and instrumentation

*Experience with two or more software tools; Autotime, TipQA, PDM, and Excel

*Ability to identify trends from complex data streams.

*BS Degree in Engineering or Technical Field



Preferred Skills

*Lean Six Sigma Green or Black Belt

*Experience executing or coaching suppliers on AS9102 FAIs and PPVs

*Working knowledge of APQP and PPAP techniques

*Implementation of Lean and Six Sigma
 
Job Number: 760
Job Location: Minneapolis, MN
Input Date: 11/01/2018
Firm Name: CSS STAFFING
Attention: Shay Rosen
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Systems Engineer 3 -secret

Description:
PDS Tech is seeking a Systems Engineer for an open position in El Segundo, CA
In your role, you will:
  • Subsystems or Algorithm duties include:

    • Designing and developing next generation RF and digital satellite communication systems

    • Developing and verifying multi-rate, fixed-point signal processing algorithms

    • Conducting performance analysis of signal processing models

    • Performing waveform development and characterization

    • Performing trade studies

    • Supporting integration ant test of our payloads and spacecraft from unit level through in-orbit operations

    • Supporting HDL-level design and verification

    • Performing detailed system design and verification activities


Basic Skills:

- 1+ years of experience with Matlab and/or Simulink.

- 3+ years of experience in digital signal processing or digital communications

- 3+ years of experience in systems engineering concepts (requirements definition, allocation, verification, architecture

design and trade design).



Preferred Skills:

- Proficiency in Matlab/Simulink.

- Experience working with ASICs or FPGAs

- Experience with performance characteristics of analog electronics or data converters (ADCs / DACs)

- Experience with digital/RF lab equipment (oscilloscope, signal generator, spectrum analyzer)
 
Job Number: 1810080052
Job Location: El Segundo, CA
Duration: 12 months
Input Date: 06/14/2018
Last Updated: 02/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023ewaAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Equipment Engineer

Description:
Test Equipment Engineer

Location: Phoenix, AZ
Pay Rate: $60/hr
Duration: 1 year contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**NO RELOCATION COMPENSATION**

Description:
The Electronic Systems Center is seeking a Test Equipment Engineer in Phoenix, AZ. This position requires an innovative, highly motivated technically savvy incumbent with strong leadership skills. Additional responsibilities to include embracing and facilitating design synergy between development, production and customer test stands to maximize reuse, adaptability and efficiency.
The ideal candidate will have the ability to translate high level vision/plans into workable packages and continuous improvement capabilities.
• The Test Equipment Engineer is expected to work as the team lead with Electrical, Mechanical and Software Engineers providing electronic test equipment.
• This role is also responsible for design, fabrication, programming, and validation of multiple test stands.
• Manage a suite of test stands that are supporting the life cycle of the product. Work may be required to adapt/modify stands during software development, hardware/software verification or production testing on the controllers.
• Develop new applications or modifications of existing products.
• Modify the existing test equipment software.
• Design/validate hardware to support new applications or resolve outstanding issues (e.g. harness, board, chassis designs).
• Create/modify CAN configuration files in LabVIEW.
• Create/modify ARINC 429 database in Ballard CoPilot format.
• Create software load utility to simultaneously access and load software to units.

Basic Qualifications
• Bachelors degree required
• Minimum 8 years of experience in the design, fabrication, and validation of industrial test equipment
• Ability to read and interpret engineering drawing and schematics
• Digital and Analog circuit design experience
• Schematic capture experience
• Strong analytical, interpersonal and communication skills. Must be autonomous (self-starter) and be able to problem solve.
• Strong knowledge of National Instrument's LabView and Teststand programming languages.
• An ability to lead a team, decipher and guide others in the creation of complex software architecture.
• Proven ability to master several test equipment components of a project or program simultaneously (can't get lost in the details).
Preferred Qualifications
• VeriStand experience
• Experience leading teams across multiple sites
• Knowledge of PWB layout methodologies
• IBM Rational DOORS
 
Job Number: 9978
Job Location: Phoenix, AZ
Rate: 60
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/17/2018
Last Updated: 10/31/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Equipment Engineer

Description:
Test Equipment Engineer

Pay rate depends on experience (estimated range of $50-60/hour)

The Electronic Systems Center is seeking a Test Equipment Engineer in Phoenix, AZ.

This position requires an innovative, highly motivated technically savvy incumbent with strong leadership skills.

Additional responsibilities to include embracing and facilitating design synergy between development, production and customer test stands to maximize reuse, adaptability and efficiency.

The ideal candidate will have the ability to translate high level vision/plans into workable packages and continuous improvement capabilities.

• The Test Equipment Engineer is expected to work as the team lead with Electrical, Mechanical and Software Engineers providing electronic test equipment.

• This role is also responsible for design, fabrication, programming, and validation of multiple test stands.

• Manage a suite of test stands that are supporting the life cycle of the product. Work may be required to adapt/modify stands during software development, hardware/software verification or production testing on the controllers.

• Develop new applications or modifications of existing products.

• Modify the existing test equipment software.

• Design/validate hardware to support new applications or resolve outstanding issues (e.g. harness, board, chassis designs).


• Create/modify CAN configuration files in LabVIEW.

• Create/modify ARINC 429 database in Ballard CoPilot format.

• Create software load utility to simultaneously access and load software to units.





Basic Qualifications

• Minimum 8 years of experience in the design, fabrication, and validation of industrial test equipment

• Ability to read and interpret engineering drawing and schematics

• Digital and Analog circuit design experience

• Schematic capture experience

• Strong analytical, interpersonal and communication skills. Must be autonomous (self-starter) and be able to problem solve.

• Strong knowledge of National Instrument's LabView and Teststand programming languages

• An ability to lead a team, decipher and guide others in the creation of complex software architecture.

• Proven ability to master several test equipment components of a project or program simultaneously (can't get lost in the details).

Preferred Qualifications

• VeriStand experience

• Experience leading teams across multiple sites

• Knowledge of PWB layout methodologies

• IBM Rational DOORS

Bachelor's Degree
US Citizen



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55192
Job Location: Phoenix, AZ
Rate: DOE
Per Diem: split
Overtime: possible
Duration: 12+ months
Start Date: ASAP
Input Date: 10/17/2018
Last Updated: 11/12/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD
City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Software Engineer / PYTHON / lab experience required CA

Description:
163502
Job Title: Test Software Engineer


Work Site Address: Torrance CA
Job Number: 5692
Max Pay Rate: 50-60HR

Start Date: ASAP
End Date: 6-12 Months
Position Type: Contract


Essential job functions:
1. Responsible for developing Python software to control and test
electro-hydraulic actuation systems and occasionally, electronic boxes.
2. Software: Python language is a must and dSpace (ControlDesk and
AutomationDesk) experience highly desired. C language and LabVIEW experience is a plus.
3. Documentation: Must have good verbal and written skills and
experience following requirements, documenting the software design and verifying the software implementation meets all the imposed requirements.


Required skills:
Candidate must be proficient in software development in a lab environment using Python. C language, dSpace and LabVIEW experience a plus. Must be knowledgeable using Windows applications such as Visio, Word and other Microsoft Office tools. Must be willing to take direction and execute assignments as asked. Must be self-motivated and willing to take ownership of assignments and look for ways to execute on time and on budget. Must be willing to report status to Project leads.

Education:
Bachelor degree in Electrical Engineering and 5 or more years of experience in the areas listed above preferred
 
Job Number: MB-5692
Job Location: Torrance, CA
Rate: 50-60/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/05/2018
Last Updated: 12/04/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

UG Designer

Description:
With electronic packaging
 
Job Location: MI/WI/TX
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jgleason@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wiring Design Engineer

Description:
Electrical wiring and Harness Design
Wiring standards and best practice design
Aircraft zonal requirements and coordination
Power, ground, signals, and databuses
Wire gauge and type consideration
Connector and backshell qualification and selection (EMI, high temperature, high vibration, environmentally sealed/hermetic, connector compatibility, pin selection, ect.)
Misc. electrical harness hardware selection (splices, solder sleeves, grounding blocks, tie wraps, terminal lugs, ect.)
Development of configuration managed, electrical harness design packages
Parts list, bill of materials, parts and standards callout
Fabrication techniques for integrated wiring assemblies
Cost, weight, and schedule trade-offs
Wire Diagram and Harness Drawing Generation
Interpretation of system interface control data to conceptual schematics for point-to-point wiring connections between units
Evolution of conceptual schematics into aircraft wiring information
Coordination of 3D data for implementation into harness drawing packages
Creation and knowledge of drawing part number changes vs. drawing revisions
Use of wiring design tool to generate wire diagrams and harness drawings
System integration as it applies to complex wiring assemblies
Good overall working knowledge of aircraft electrical/electronic system
Implementation of wiring and harness level system separation and segregation to avoid common cause failure modes, including electrical signal and power separation
Databus and digital equipment interface considerations


Qualifications

BSEE or equivalent technical training, and a minimum of 5 years applicable industry related work experience in wire design
Experience with IGE-XAO SEE Electrical Expert is preferred; Mentor Graphics, Autocad, Zuken, or similar smart wiring design tool is required
Good working knowledge with Microsoft Office suite (Word, Excel, and PowerPoint) is required
Good working knowledge with Teamcenter for releasing wire diagrams and harness drawings, or familiarity with other PLM systems (such as SmartTeam, etc.) is desired
Good working knowledge with Electrical Wiring Interconnect System (EWIS) is desired



The Structures Company is an AA/EOE.
 
Job Number: 229
Job Location: NC
Rate: $55-$60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: November
Input Date: 02/12/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
Back to Advanced Job Search