Job Search Results

885 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/09/24 Monday 02:58PM Pacific Time by ContractJobHunter. )

Listings 1 - 885

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2240 - REAL TIME SOFTWARE DEVELOPER - AEROSPACE

Description:
Engineering support with the necessary skills to develop, track and troubleshoot real time data collection systems on aero engines.

Candidate must have at least 5 years of relevant experience and have some familiarity/experience with DO-178 and DO-254 standards.

Critical Skills:

Experience troubleshooting and debugging airborne diagnostic systems.

Ability to perform investigations into issues that may span across several different platforms and technologies.

Experience with C/C++

Experience with Embedded Linux Operating System and Linux system administration background.

Experience with Real-time Embedded Systems.

Experience with Wireless GSM.

Ability to come to the correct conclusion during investigation and support it with facts.

Self-Motivated.

Strong Problem solving abilities.

Due to security/clearance factors, candidate must be a US citizen.
 
Job Number: 2240
Job Location: Boston, MA
Rate: 100.00
Per Diem: TBD
Overtime: TBD
Duration: 12+ Mths
Start Date: ASAP
Input Date: 07/27/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Administrative Assistant

Description:
We are looking for an Administrative Assistant to work in our Recruiting / Sales Office in Lakeville, MA. This is a full-time position Monday thru Friday from 9:00 – 5:00. In addition to the general duties listed below, the Administrative Assistant will be asked to be the liaison to our Payroll and Finance Department located at our Corporate Office in Portland, ME.

Responsibilities:

The Administrative Assistant will manage the administrative day-to-day activities including, but not limited to:
* Answers, screens, and directs incoming telephone calls.
* Responds to routine and non-routine inquiries as appropriate.
* Schedules appointments, assists with travel plans, arranges meetings, and prepares required materials. May attend meetings and record and report on proceedings if necessary.
* Provide support to Salesman and Recruiters, as requested, and handle office issues as required. This also includes daily communication with Corporate Payroll and Finance Departments.
* Prepare and maintain reports, spreadsheets, data bases, and/or other software files and information.
* Organizes and maintains office and client files
* Opens, reviews and distributes incoming mail; also may prepare and ship outgoing mail or documents
* Perform all other position related duties as assigned or requested.

Experience / Skills:

* 1-3+ years’ experience of related work experience
* HS Diploma a must
* Must have a reliable vehicle for transportation
* Strong MS Word, Excel and general internet skills
* Strong attention to detail; excellent data entry and organizational skills
* Strong written and verbal communication skills
* Ability to work independently with minimum supervision

Preferred:

* Experience in a Recruiting / Sales environment within the Administrative Assistant field
* Experience recording and calculating commissions via Excel
* Associate’s / Bachelor’s degree in Human Resources or a related field


Mark A Ludwig
Vice President of Sales
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 - 6180
Toll Free: (800) 510 - 8050 x123
Fax: (508) 923 - 0005
www.globalamericanstaffing.com
 
Job Number: Admin
Job Location: Lakeville, MA
Rate: Open
Per Diem: N/A
Overtime: N/A
Duration: Perm Hire
Start Date: Feb 13 - Mar 13
Input Date: 01/18/2017
Last Updated: 09/14/2017
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerodynamicist

Description:
Aerodynamicist with Performance and Handling Qualities (P&HQ)
- Aerospace experience mandatory
Location: Mojave, CA
Duration: Contract 12-24 months
Hourly Rate: up to $85/hr
Overtime Potential
Per Diem if you qualify
Holiday, annual bonus, sick pay, 401k
8+ years of experience in Stability and Control: vehicle stability, dynamic stability, controllability; Performance experience is a plus but majority should come from S&C and flight dynamics.
Transonic vehicle experience required; Supersonic vehicle experience a plus
Experience in reversible flight controls
Experience with SIDPAC toolset a plus
Job Title: Aerodynamicist with Performance & Handling Qualities (P&HQ) expertise. Main Purpose of the Role is seeking an experienced cross-disciplinary engineer with experiences in aerodynamics and computational fluid dynamics. The candidate will build on an intimate knowledge of all aircraft systems and have the ability to support and develop new project initiatives.
Responsibilities:
• Support event simulation model development and validation of performance, handling qualities, stability, and control criteria for suborbital space missions
• Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
• Works with other engineering groups to ensure proper application of design and P&HQ requirements
• Supports entry into commercial service by ensuring that regulatory and internal company requirements related to loads are met
• Develop standardized analysis and reporting tools
• Perform model updates from data collected during vehicle or component testing and data created with analytical tools
• Develop and maintain P&HQ databases for use in analysis of WK2 and SS2 during all flight phases
• Develop and substantiate rational P&HQ criteria and requirements for unique vehicles with unconventional configurations
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Anticipates and resolves issues by developing standards and guidelines
• Ability to problem solve with a balance of technical product, cost, and schedule
Qualifications:
Professional Requirements
• Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 8 years of experience in aerodynamics development
• Experiences in wind-tunnel and flight test aerodynamic model validation
• Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
• Test plan development and data analysis experience a strong plus
• Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
• Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
• Advanced skills with Linux, Python, Simulink, MATLAB, Fortran, C, C++, and software development best practices.
• CATIA V5 experience preferred
• Air Data Experience preferred
• Experience with FUN3D, NSU3D, Pointwise, and/or similar RANS and gridding methods
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
The Structures Company is an AA/EOE.
Job Type: Contract
 
Job Location: Mojave, CA
Rate: up to 85/hr
Per Diem: yes
Overtime: possible
Duration: 12-24 months
Start Date: asap
Input Date: 10/17/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerodynamicist (CFD)

Description:
Aerodynamicist - CFD
Location: Mojave, CA
Duration: 9+ months
Rate: DOE

Aerospace

Aerodynamicist with P&HQ. Main Purpose of the Role is experienced cross-disciplinary engineer with experiences in aerodynamics, computational fluid dynamics, and thermal analysis.  The candidate will build on an intimate knowledge of all aircraft systems and have the ability to support and develop new project initiatives.
 
Responsibilities:
•             Support loads event simulation model development and validation of aerodynamic criteria for suborbital space missions
•             Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
•             Works with other engineering groups to ensure proper application of design and requirements
•             Supports entry into commercial service by ensuring that regulatory and internal company requirements related to loads are met
•             Develop standardized analysis and reporting tools
•             Perform model updates from data collected during vehicle or component testing and data created with analytical tools
•             Develop and maintain aerodynamic databases for use in analysis during all flight phases
•             Develop and substantiate rational P&HQ criteria and requirements for unique vehicles with unconventional configurations
•             Air Data Experience
 
 
Qualifications:
Professional Requirements
•             Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 5 years of experience in aerodynamics development
•             Experiences in wind-tunnel and flight test aerodynamic model validation
•             Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
•             Test plan development and data analysis experience a strong plus
•             Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
•             Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
•             Advanced skills with Linux, Python, Simulink, MATLAB, Fortran, C, C++, and software development best practices.
•             CATIA V5 experience preferred
•             Experience with FUN3D, NSU3D, Pointwise, and/or similar RANS and gridding methods
•             Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
 The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Per Diem: yes
Overtime: possible
Duration: 9+ months
Start Date: asap
Input Date: 10/17/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Design Engineers - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring Aerospace Design Engineers for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• To design tooling, fixtures or equipment per customer specifications to meet the intended need
• Develop advanced planning on tooling concepts
• Support manufacturing during build phases and resolve any non-conformances in a timely manner
• Utilize CAD software to perform FEA analysis on designs, write FEA reports and provide design feedback to design engineers
• To support and provide feedback on customer RFQ’s
• Assume other accountabilities and duties as assigned by the Leadership

Qualifications:

• Strong CAD (Catia, NX, etc.) design abilities including 3D modeling and complex assemblies
• Experience with and/or knowledge of Tooling Design and Manufacturing, Controls knowledge a plus
• Experience with and/or knowledge of Automated Production Systems a plus
• Ability to effectively prioritize and execute tasks in a high-pressure environment including following on tools during the fabrication, build installation and commissioning phases of the project
• Ability and willingness to travel to any of the customer and Company’s work locations in North America, Europe and Asia, as required by Management
• Must be willing to work extended hours, when necessary, including overtime, weekends and holidays and on night shift, as project and customer demands dictate
• Excellent interpersonal, written and verbal communication skills
• Ability to work with others, including peers and personnel in other departments
• Eligibility for clearance under the Canadian Controlled Goods and the American ITAR requirements
• At minimum a Bachelor of Science in Mechanical or Aerospace Engineering, Masters of Science in an engineering discipline preferred
• PE license preferred, must show ability to attain license
• Minimum 5 years’ experience performing stress analysis utilizing FEA software (Abaqus, Algor, NASTRAN/PASTRAN, etc.) and performing hand calculations

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39985
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Software Engineer (java)

Description:
Role: Aerospace Software Engineer (java)

Location: Cedar Rapids, Iowa.

Duration:6 months+

Qualifications
Must Have Requirements:

• Bachelor's degree in a Science, Technology, Engineering or Math (STEM) discipline
• Candidate must hold a current U.S. DoD SECRET Security Clearance or be eligible to obtain a U.S. DoD SECRET Security Clearance.
• Enterprise software development experience (Java, XML suite) (2 years)
• Enterprise networking experience (2 years)
• Linux development experience (2 years)
• Experience following a well defined software development process (2 years)
• Adaptable to change, enjoys learning new technologies, and contributes to a positive work environment
• Solid written and verbal communications skills and the ability to work well with others in a professional team environment
• Strong organizational skills and the ability to manage multiple tasks while balancing priorities and schedules
• Motivated self-starter with strong analytical skills
• Configuration management tools and processes experience
 
Job Number: 52234
Job Location: Cedar Rapids, IA
Duration: 6 years+
Input Date: 09/01/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bala
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interior Design Engineer

Description:
Interior Design Engineer:
Location: Southeast USA
Duration: long term contract

The Interior Design Engineer will perform design engineering for cabin & cockpit structures, components, and trim for aircraft. The individual will also support tasks associated with interior Installations.

Duties and Responsibilities:
1. Creates conceptual designs for interiors of the aircraft through 3D modeling software, drawings, and/or drafting application.
2. Develops designs for form/fit/function to meet customer and design criteria.
3. Provides designs for the fabrication process including sheet metal, extrusions and inject molding
4. Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
5. Makes recommendations to engineering lead/management.
6. Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.
7. Ensures adherence to program schedule.
8. Performs other duties as assigned.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors’ degree in Mechanical, Aerospace or Civil Engineering from a four year college or university is required. (In lieu of degree, management may elect to consider individuals with a equivalent years of combined experience and training.)
2. Masters’ degree in Engineering preferred.
3. 8+ years of engineering experience with at least three years of design engineering experience directly related to mechanical/interior design for commercial aircraft.

Knowledge, Skills and Abilities:
1. Working knowledge of conceptual design development of aircraft interiors.
2. Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
3. In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
4. Familiarity with 14CFR Part 23/25.
5. Proficiency in CATIA V5 workbenches or equivalent 3D modeling tools (i.e. - Solidworks, Unigraphics, etc).
6. Proficiency in Teamcenter (or equivalent PLM tool).
7. Ability to work independently or within a team environment.
8. Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
9. Ability to work cross functionally with Quality and Production to resolve issues on the production line.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Southeast US
Rate: DOE
Per Diem: Yes
Overtime: Possible
Duration: 9+ months
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Stability & Control Analyst (Performance & Handling Qualities)

Description:
US Persons ONLY -
• 8+ years of experience in Stability and Control: vehicle stability, dynamic stability, controlability; Performance experience is a plus but majority should come from S&C and flight dynamics.
• Transonic vehicle experience required; Supersonic vehicle experience a plus
• Experience in reversible flight controls
• Experience with SIDPAC toolset a plus


Job Title: Aerodynamicist with Performance & Handling Qualities (P&HQ) expertise. Seeking an experienced cross-disciplinary engineer with experiences in aerodynamics and computational fluid dynamics. The candidate will build on an intimate knowledge of all aircraft systems and have the ability to support and develop new project initiatives.

Responsibilities:
• Support event simulation model development and validation of performance, handling qualities, stability, and control criteria for suborbital space missions
• Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
• Works with other engineering groups to ensure proper application of design and P&HQ requirements
• Supports entry into commercial service by ensuring that regulatory and internal company requirements related to loads are met
• Develop standardized analysis and reporting tools
• Perform model updates from data collected during vehicle or component testing and data created with analytical tools
• Develop and maintain P&HQ databases for use in analysis during all flight phases
• Develop and substantiate rational P&HQ criteria and requirements for unique vehicles with unconventional configurations
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Anticipates and resolves issues by developing standards and guidelines
• Ability to problem solve with a balance of technical product, cost, and schedule


Qualifications:
Professional Requirements
• Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 8 years of experience in aerodynamics development
• Experiences in wind-tunnel and flight test aerodynamic model validation
• Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
• Test plan development and data analysis experience a strong plus
• Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
• Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
• Advanced skills with Linux, Python, Simulink, MATLAB, Fortran, C, C++, and software development best practices.
• CATIA V5 experience preferred
• Air Data Experience preferred
• Experience with FUN3D, NSU3D, Pointwise, and/or similar RANS and gridding methods
• Applicants must be U.S. persons


The Structures Company, LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Analog Design Engineer

Description:
Job Summary:

Lead the development of science instruments for space flight missions; work with scientists and engineers across technical boundaries to develop instrument concept; spearhead new technology development of detectors and electronics in laboratory vacuum systems; travel to the facilities of other instrument team members to participate in design meetings; oversee the process of writing requirement and specification documents; lead the design of flight electronics to meet high-reliability requirements that are necessary for NASA missions; direct the development of prototype experiments in the laboratory; review procedures and oversee comprehensive hardware verification tests; organize and deliver presentations to NASA representatives in formal design reviews; provide support for instrument qualification tests and calibration, including field tests at customer facilities (NASA centers, government labs); participate in commissioning and operation of science instrument after it has been launched into space.

Education/Experience:
Requires a BS degree in Electrical Engineering
Advanced degree (MSEE or equivalent) is desirable/preferred.
Requires 10-15 years of related experience to include strong analog design and analysis skills, a digital design background, and hardware/software troubleshooting.
Must possess the ability to lead and mentor less experienced engineering staff, lead/direct the development of prototype experiments, scientific instruments and spearhead new technology developments; experience with scientific instruments associated electronics and detector systems preferred with the ability to write requirement and specification documents, procedures and conduct comprehensive hardware verification tests; must possess strong communication and presentation skills to deliver presentations to internal as well as external customers (NASA, ESA, commercial). A valid/clear driver's license is required.
This position requires passing the test.

Special Considerations:
Must be a U.S. citizen or Permanent Resident due to ITAR work in section
 
Job Location: San Antonio, TX
Rate: Open
Per Diem: Yes, Split
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 09/13/2017
Firm Name: AMERICAN CONTRACT GROUP
Address: 50 HIGH ST STE 46
City, State: NORTH ANDOVER, MA 01845
Phone: 978/984-5581
800 Phone: 877/723-9087
Fax Phone: 978/208-8246
Website: www.americancontractgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Applications Engineer - Level 3

Description:
Applications Engineer - Level 3

Location: Lexington, KY
Pay Rate: DOE ($55/hr - $65/hr)
Duration: 1 year contract
Shift: First, 5/40, exempt
**MUST be eligible to obtain a DoD SECRET CLEARANCE**
**MUST be a U.S. CITIZEN**

Description
-This is an early to mid career position (5 to 10 years experience) for a Product Lifecycle Management (PLM) software administrator.
-The PLM Admin will be responsible for managing the daily operations and milestone events (e.g. upgrades) for the PLM software (Teamcenter) at the Special Operations Forces Support Activity (SOFSA) contract in Lexington, Kentucky.
-She / he will be part of the IT department and will work with the user community (primarily production engineering) to ensure the software meets the needs of the contract.
-This includes, but is not limited to, configuration settings, and workflow / report design and support.
-Gathers information concerning the capabilities of company products;
-Investigates the technical capabilities of company products and competing equipment;
-Stays abreast of developments in hardware and software;
-Analyzes customer problems; assists in designing systems to satisfy customer needs.
-Prepares equipment analysis to instruct sales force and customers in equipment capabilities.
-May prepare and present sales proposals.

Skill/Experience/Education (MANDATORY):
-PLM Experience: (4-5 years required)
-Application Administration (Server Side): (4-5 years required)
-CompTIA Security+ certification (required)

Desired:
-Teamcenter (Engineering or Unified)
-PLM data modeling experience
-Experience working with a Linux interface
-Experience writing custom handlers or extension rules
-Customer service experience working directly with users to answer questions and troubleshoot issues

Applicant Questions:
1) How many years of PLM Administration do you have?
2) What PLM software have you worked with?
 
Job Number: 7480
Job Location: Lexington, KY
Rate: 55-65
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 05/31/2017
Last Updated: 10/26/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Automation Software Developers

Description:
OOP-object oriented programming, high speed
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: ccastro@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Cargo Care Representatives - Dallas, TX

Description:
STS AeroStaff Services is hiring Aviation Cargo Care Representatives for open positions in Dallas, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Assist Customers with all cargo inquiries received through the Cargo Customer Care Center
• Support the objectives of Cargo Management, Ground Operations
• Follows the Basic Principles of Leadership and leads by example in all management practices
• Entertain and qualify all calls to the Cargo Customer Care Center (CCCC), answering Customer inquiries on cargo policies and procedures
• Process booking requests for human remains shipments
• Process and respond to cargo claims and refund requests, both verbal and written
• Assist Customers and Cargo Agents with tracing cargo shipments
• Process new cargo account applications
• Support and assist Cargo Management with operational projects
• Provide support to the Area Managers with sales/marketing projects and Customer Relations as needed

Qualifications:

• High School diploma or equivalency required
• College course work or degree would be an asset
• Experience Experience handling inbound telephone Customer Service and/or sales preferred
• Knowledge of air cargo policies and procedures would be an asset
• Ability to perform physical activities such as lifting, standing, sitting, driving, pulling, pushing, squatting, hearing, climbing, walking, kneeling, reaching, crawling writing, and speaking
• Ability to type and/or use a computer keyboard with sufficient speed and accuracy to meet demands of job
• Must be aware of hazardous situations and be able to handle emergencies as needed
• Must be able to comply with Company attendance standards as described in established guidelines
• Possess excellent organizational skills; including file maintenance and reporting
• Ability to solve problems by asking fact finding questions and utilizing multiple data sources
• Must be able to handle multiple situations simultaneously and difficult/demanding Customer Service issues
• Must communicate effectively by telephone
• Strong written communications skills
• Written communication (including email) must be professional in tone and audience appropriate
• Must be proficient in the use of current software, i.e. Microsoft Office (e.g., Outlook, Excel, Word, Access, and PowerPoint), Cargo point of sale system, Salesforce, etc.
• Must be able to utilize multiple applications simultaneously
• Must meet confidentiality expectations as to confidential, proprietary and sensitive Company information
• Must be available to work a variety of shifts
• Must be able to travel occasionally and work extended hours on an as needed basis
• Must maintain a well-groomed appearance
• Must be a U.S. citizen or have authorization to work in the United States as described by the Immigration Reform act of 1986

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39984
Job Location: Dallas, TX
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Bleed Air Designer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-024
Job Location: Greensboro, NC
Rate: Up to $60/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/17/2018
Last Updated: 09/24/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer IV

Description:
CNC Programmer IV

Location: Canoga Park, CA
Rate: DOE
Duration: 1 year contract
Shift: 1st Shift

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Phone AND In-Person interviews are required. Candidates must be able to attend an in-person interview at their own expense **

Duties:
Must show this experience on resume:
** Siemens NX9-NX11 NC Programming experience is required **
** DMU Mori with Siemens 840D Experience; Specifically DMU80 FD and DMU65 **
** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

50% - The NC Programmer is responsible for writing new CNC programs, setup instructions, estimating and making changes to existing CNC programs. Will develop, write and maintain NC programs for complex aerospace components using engineering models, drawings and specifications to support a zero defects machining operations environment. Selects program routines for the most efficient machining methods for each part. Will be involved in the prove out of new technology, first article inspection, fixture design, and day to day programming using Siemens NX9-NX11 CAM.
10% - Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.
5% - Make proper cutting tool selections, taking into consideration such factors as materials, speeds, type of cutters, feeds and control system imitations.
10% - Use machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and 100% defect-free FTT machining processes.
10% - Modify existing parts programs for engineering changes or program improvements.
5% - Work closely with Machinists, Quality, Engineering, Management and other team members.
5% - Develop, write and maintain type II probe and logic macros to perform on machine touch probe measuring, fixture updates, cutter offset updates, and part feature data collection.
5% - Participate in knowledge sharing and cross training activity within the NC programming group.

Skills:
** Siemens NX9-NX11 NC Programming experience is required **
** DMU Mori with Siemens 840D Experience; Specifically DMU80 FD and DMU65 **
** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

Preferred Requirements:
-NX Post Builder expertise
-NX Machine tool Configurator expertise
-Vericut Machine Builder expertise
-Fanuc custom macro programming expertise
-Siemens 840D macro programming expertise

Education:
- Bachelors degree or equivalent experience.
 
Job Number: 7811
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 01/04/2018
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer IV / MUST have Current and Strong NX Programming / local only CA

Description:
160187/7332297

Job Title: CNC Programmer IV
Keywords:
Number of Positions: 1
Remaining Positions: 1
Duties: ** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Required (Please screen for these three items and make sure the experience is accurately reflected on resumes):
** Siemens NX9-NX11 NC Programming experience is required **
** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **
** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

** Candidates above the maximum bill rate will be considered. Please make sure that they are submitted at rates commensurate with their qualificaitons **

** Phone AND In-Person interviews are required. Candidates must be able to attend an in-person interview at their own expense **


• 50% - The NC Programmer is responsible for writing new CNC programs, setup instructions, estimating and making changes to existing CNC programs. Will develop, write and maintain NC programs for complex aerospace components using engineering models, drawings and specifications to support a zero defects machining operations environment. Selects program routines for the most efficient machining methods for each part. Will be involved in the prove out of new technology, first article inspection, fixture design, and day to day programming using Siemens NX9-NX11 CAM.
• 10% - Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.
• 5% - Make proper cutting tool selections, taking into consideration such factors as materials, speeds, type of cutters, feeds and control system imitations.
• 10% - Use machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and 100% defect-free FTT machining processes.
• 10% - Modify existing parts programs for engineering changes or program improvements.
• 5% - Work closely with Machinists, Quality, Engineering, Management and other team members.
• 5% - Develop, write and maintain type II probe and logic macros to perform on machine touch probe measuring, fixture updates, cutter offset updates, and part feature data collection.
• 5% - Participate in knowledge sharing and cross training activity within the NC programming group.




Skills: Required (Please screen for these three items and make sure the experience is accurately reflected on resumes):

** Siemens NX9-NX11 NC Programming experience is required **

** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **

** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

Preferred Requirements:
-NX Post Builder expertise
-NX Machine tool Configurator expertise
-Vericut Machine Builder expertise
-Fanuc custom macro programming expertise
-Siemens 840D macro programming expertise

Education: Bachelors degree or equivalant experience.


Skills: Required
• SIEMENS
• NC PROGRAMMING
• LATHE


Work Performed
Onsite:
State/Province: California
City/Town: Canoga Park
Address: 8900 Desoto Ave


Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 09/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7332297
Job Location: Canoga Park, CA
Rate: 44.29/hr
Duration: 12 month contract
Input Date: 08/28/2017
Last Updated: 09/21/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Project Spec II - Special Missions

Description:
UNIQUE SKILLS
This position provides technical and project oversight of projects for TC design changes and STCs to clients' certified aircraft. The chosen candidate will serve as a liaison between the company and FAA/ODA, engineering focal and other Civil Aviation Authorities. Qualified Candidates: - must be detail oriented and thorough - must demonstrate strong technical writing skills of certification documentation - must be experienced in establishing Certification project plans and leading projects to closure - have ability to handle multiple cert projects simultaneously - be a good team player - Certification projects experience in Special Missions projects and STCs is highly desirable

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree Engineering, Business or related field or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years supporting engineering certification projects and/or activities.

POSITION PURPOSE
Under minimum supervision, performs a variety of engineering tasks to support MRA (Major Repairs and Alterations), STC (Supplemental Type Certificate), TC (Type Certificate) and/or other regulatory approval project processes including review of data packages, identification of procedural and certification issues, and providing guidance to engineering on procedures and regulations.

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Reviews STC/TC/MRA data packages prior to submission to the FAA (Federal Aviation Administration) for completeness and adherence to the established requirements. Makes decisions and recommendations that are recognized as authoritative to ensure STC/TC/MRA documentation is prepared and processed in accordance with approved procedures.
2. Assists department manager/ODA Program/Project Administrator in providing training and guidance concerning ODA procedures. 3. Demonstrates creativity, foresight, and mature engineering judgment in anticipating and solving procedural issues that may impact the schedule of STC/TC/MRA issuance.
4. Interfaces with local and foreign authorities on issues related to STC/TC/MRA projects.
5. Actively works to improve the department processes and ensures all work meets customer requirements and expectations.
6. Maintains a current and up-to-date knowledge in the field in order to recommend process changes or innovations that will improve the quality, economy, and effectiveness of the company products.

ADDITIONAL FUNCTIONS
1. Familiar with working regulatory issues and coordinating closure of Issue Papers and other certification issues.
2. Develops department training material.
3. Assumes responsibility for assigned projects, tasks, or processes.
4. Assists department manager/ODA Program/Project Administrator in resolving standardization issues.
5. Keeps abreast of changes to regulatory requirements and guidance material.
6. Minimum travel required. Perform other duties as assigned.

OTHER REQUIREMENTS
1. Must be proficient in working with MS Office software.
2. Strong background with Federal Aviation Administration (FAA) certification processes.
3. Strong background with Federal Regulations (14 CFR Part 21, 23, 25, 43, 91, 135 and 183) and associated guidance material.
4. Must be very experienced in working with regulatory requirements.
5. Must possess excellent attention to detail and display the ability to effectively adjust to changing engineering practices and procedures.
6. Must have excellent organizational and planning skills.
 
Job Number: 17-773-110241
Job Location: Southeast
Rate: $40.00 to $45.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Project Spec II - Special Missions

Description:
Certification Project Spec II - Special Missions

Location: Savannah, GA
Pay Rate: $40/hr - $45/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-This position provides technical and project oversight of projects for TC design changes and STCs to Company's certified aircraft.
-The chosen candidate will serve as a liaison between the company and FAA/ODA, engineering focal and other Civil Aviation Authorities.

Qualified Candidates:
- must be detail oriented and thorough
- must demonstrate strong technical writing skills of certification documentation
- must be experienced in establishing Certification project plans and leading projects to closure
- have ability to handle multiple cert projects simultaneously
- be a good team player
- Certification projects experience in Special Missions projects and STCs is highly desirable

Education and Experience Requirements:
Bachelor's Degree Engineering, Business or related field or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years supporting engineering certification projects and/or activities.

Position Purpose:
Under minimum supervision, performs a variety of engineering tasks to support MRA (Major Repairs and Alterations), STC (Supplemental Type Certificate), TC (Type Certificate) and/or other regulatory approval project processes including review of data packages, identification of procedural and certification issues, and providing guidance to engineering on procedures and regulations.

Principle Duties and Responsibilities/Essential Functions:
1. Reviews STC/TC/MRA data packages prior to submission to the FAA (Federal Aviation Administration) for completeness and adherence to the established requirements. Makes decisions and recommendations that are recognized as authoritative to ensure STC/TC/MRA documentation is prepared and processed in accordance with approved procedures.
2. Assists department manager/ODA Program/Project Administrator in providing training and guidance concerning ODA procedures.
3. Demonstrates creativity, foresight, and mature engineering judgment in anticipating and solving procedural issues that may impact the schedule of STC/TC/MRA issuance.
4. Interfaces with local and foreign authorities on issues related to STC/TC/MRA projects.
5. Actively works to improve the department processes and ensures all work meets customer requirements and expectations.
6. Maintains a current and up-to-date knowledge in the field in order to recommend process changes or innovations that will improve the quality, economy, and effectiveness of the company products.

Additional Functions:
1. Familiar with working regulatory issues and coordinating closure of Issue Papers and other certification issues.
2. Develops department training material.
3. Assumes responsibility for assigned projects, tasks, or processes.
4. Assists department manager/ODA Program/Project Administrator in resolving standardization issues.
5. Keeps abreast of changes to regulatory requirements and guidance material. 6. Minimum travel required. Perform other duties as assigned.

Other Requirements:
1. Must be proficient in working with MS Office software.
2. Strong background with Federal Aviation Administration (FAA) certification processes.
3. Strong background with Federal Regulations (14 CFR Part 21, 23, 25, 43, 91, 135 and 183) and associated guidance material.
4. Must be very experienced in working with regulatory requirements.
5. Must possess excellent attention to detail and display the ability to effectively adjust to changing engineering practices and procedures.
6. Must have excellent organizational and planning skills.
 
Job Number: 7733
Job Location: Savannah, GA
Rate: 40-45
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/09/2017
Last Updated: 10/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Engineering Liaison Production - Aerospace

Description:
Engineering Liaison Production - Aerospace and Defense
Contract - Contract to hire.

Ingenium Technologies - San Diego, CA
Must be a US person

An Engineering Liaison Production Temp is needed for a proven and reliable world leader in Aviation Air-to-Ground Communications, Aircraft Systems and Tactical Reconnaissance Radars, as well as advanced high-resolution Surveillance Systems.

Responsibilities will include but not be limited to:
• Under general supervision and with intermittent review, this position supports New Product Introduction (NPI) manufacturing engineering by serving as a liaison between the NPI engineers and operational departments.
• Monitors developmental item progress and expedites critical components most often made by a manufacturing service request.
• Evaluates and resolves periodic production problems related to manufacturing service request items.
• Maintains location awareness and physical control of prototype parts and tools in-work.
• Attend frequent factory control sessions to advocate resource assignments for developmental work and resolve holdups.
• May negotiate work plans with suppliers, shop supervisors and manage schedules for timely delivery.
• Examines pre-production drawings and technical information to translate design intent for prototype products.
• Ability to track down responsible authorities in diverse design groups to resolve uncertainties in a timely manner.
• Monitors and reports progress of manufactured or acquired parts for projects.
• Formulate process models and cost-estimation basis in support of capital investment.
Software Requirements:
• Microsoft Office Products

Required Experience:
• 5 to 15 Years experience in aerospace composite manufacturing, processing and materials knowledge.
• Proficient in composite lamination and assembly process techniques, especially as it pertains to the use of tooling.
• Strong working knowledge of composite tool designs including master molds, lamination molds, assembly fixtures, mill fixtures and other similar composite processing fixtures.
• Working knowledge of common composites materials including prepregs and various bagging materials.

Required Education: Bachelor's degree preferred. May substitute equivalent experience in lieu of education.

Position: Contract to Hire, 1 year or longer

Location: San Diego, CA

Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to verify US Citizenship.

Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation, or any other
 
Job Number: 95015
Job Location: San Diego, CA
Rate: $55.00
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: Now
Input Date: 09/13/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: David Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Manufacturing Engineer 2nd Shift - Aerospace

Description:
Description:

Manufacturing Engineer 2nd Shift - Aerospace and Defense

Ingenium Technologies - San Diego, CA

A Manufacturing Engineer 2nd Shift is needed for a proven and reliable world leader in Aviation Air-to-Ground Communications, Aircraft Systems and Tactical Reconnaissance Radars, as well as advanced high-resolution Surveillance Systems.


Responsibilities:

Perform detailed review of composite part CAD model and lamination drawing (solid and honeycomb panel designs)

Generate surface geometry representing tool and honeycomb core layers, generate boundary curve geometry for individual plies from the applicable CAD models and drawings

Utilize Siemens NX and FiberSIM PLM software package to produce a composite manufacturing solution for complex parts that adheres to engineering process specifications

Generate Flat Pattern and Laser Projection files using FiberSIM

Create Powerpoint PlyBook files from Flat Patterns, for use by the Manufacturing Engineering group in lamination work instructions

Provide support to manufacturing engineering on shop floor when needed



Software Requirements:

Experience with CAD, Siemens NX (Unigraphics)/FiberSIM, PLM is required


Required Experience:

5 to 15 Years experience in aerospace composite manufacturing, processing and materials knowledge.
Proficient with CAD (Creo and/or Pro E) and Siemens NX/FiberSIM PLM software
Working knowledge of composite part design and fabrication methods
Experience working in commercial and/or military aircraft manufacturing environments
Familiar with composite lamination drawings and process specifications
Previous hand layup experience with prepreg material is a plus


Required Education: Bachelor's degree preferred. Associate's degree in a related discipline and three or more years progressive experience in a technical field. May substitute equivalent professional experience in lieu of education/training.


Position: 2nd Shift, Contract to Hire, 6mos or longer

Location: San Diego, CA


Employment Criteria : This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Citizen, who does not work for a foreign company/foreign government/foreign governmental agency or organization, and is in compliance with International Traffic in Arms Regulations.


Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 95012
Job Location: San Diego, CA
Rate: $45.00
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: Now
Input Date: 09/13/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: David Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer (6 openings)

Description:
Composite Structural Design Engineer (6 openings)
Location: Mojave, CA
Duration: 12+ months
Hourly rate: Open, DOE
Desired Skills: MICROSOFT OFFICE;CATIA; Structural design of primary and secondary composite aircraft structure.
Composite Structural Design Engineer Job Description
Perform preliminary and detail design of metallic and composite structure, including initial sizing of joints, structure layout and design for manufacturability.
Create 3D/2D definition of parts, assemblies and installations.
CATIA V5, Composites workbench is a plus.
Establish manufacturing tolerances for production of structural components using GD&T.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements
Works with Industrial Design team to develop conceptual designs for cabin interior
Develops rapid prototypes for evaluation throughout design development process
Develops 3D CAD models and 2D engineering definition for detail parts, assemblies, and installations inside the pressurized cabin
Establishes manufacturing tolerances for production of structural components
Develops and documents system requirements and interface constraints for components
Coordinates with Analysis and Testing departments to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes .
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)
Educational Requirements
Bachelor's degree from an accredited institution, with a concentration in Aeronautical and Astronautical, Aerospace, or Mechanical Engineering..
Composite Structural Design Engineer requirements:
3 years or more experience design engineering for aerospace composite fabrication and assembly processes.
Proficient with CATIA V5
Required Workbenches: Part Design, Assembly Design, Sketcher, Drafting, Wireframe and Surface Design
Desired Workbenches: Generative Shape Design (GSD), Composites (CPD) Experience using GD&T and ASME Y14.5M-1994 drafting standards
Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
Experience designing for aerospace environments
D_ _esired Experience in the development of human spaceflight hardware desired
Experience with Product Lifecycle Management (PLM) software and configuration management processes
Excellent analytical and decision-making skills Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.
Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook
Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
Composite Structural Design Engineer
The Structures Company, LLC is an AA/EOE.
 
Job Location: Mojave, CA
Rate: "open"
Per Diem: yes
Overtime: possible
Duration: 12+ month
Start Date: asap
Input Date: 09/19/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Data Analyst ** Local Candidates Only CA

Description:
160215/7430684

Job Title: Configuration Data Analyst
Max rate: $35/hr

Number of Positions: 1
Remaining Positions: 1
Duties: ** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Local Candidates Only as an in-person interview is required **


Note: Data references are engineering data unless otherwise stated. The main CM Tool (PLM) is Windchill, previous experience is a plus.
1. Need to perform data entry into the PLM system (Windchill)
2. Vaulting documents in PLM system for contract & subcontract data
3. Perform Data Retention and Archive (Iron Mountain)
4. Support in the development of data packages for multiple program’s hardware pedigree reviews
5. Follow up on contract Data submittals
Skills: ** Must have strong MS Office Suite skills and experience. **

-Solid Data Analyst experience required. Preferably with engineering data.
-Understanding and application of Configuration and Data Management principles, concepts, and practices helpful.
-Knowledge of information technology systems, concepts, hardware and software programs helpful.
Education: A Bachelor's degree in an appropriate discipline and two (2) years of directly related experience, or an equivalent combination of education and experience.



Skills: Required
• DATA MANAGEMENT
• DATA ANALYSIS
• DATA ARCHIVING
• DATA ENTRY
• MS OFFICE

State/Province: California
City/Town: Canoga Park


Start Date: 09/04/2017 Hours Per Week: 40.00
Est. End Date: 01/07/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7430684
Job Location: Canoga Park, CA
Rate: 35/hr max
Duration: 4 month contract
Input Date: 09/06/2017
Last Updated: 09/14/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
1. Review 3D engineering data for conformance to requirements as directed.
2. Check parts for fit, form and function to the extent that information is available.
3. Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
1. Accuracy and completeness of engineering product definition data, including CAD and PDM data.
2. Proper application and compliance with all Engineering and customer drawing requirements.
3. Use and understanding of GD & T a must.
4. Dimensioning and tolerancing including familiarity with ASME Y14.5.
5. Application of best drafting and design practices and procedures.
6. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
7. Advise Design personnel regarding company drawing and design practices and procedures.
8. Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
9. Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
10. Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
11. Knowledge of company parts list & PdocM, a plus.
12. Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
1. Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
2. Ensures designs meet customer criteria, quality standards and FAA requirements.
3. Adheres to budget and project schedules.
4. Provides design guidance and feedback to other engineering personnel.
5. Other duties as assigned.
6. Knowledge of industry design and documentation standards.
7. Experience with mechanical assemblies and manufacturing technique design.
8. Ability to work independently and cross-functionally.
9. Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills.
10. Knowledge of Excel, Share Point software, Microsoft Office a plus

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-191
Job Location: Savannah, GA
Rate: $50.00 - $55.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Drafter UG/NX required / Solidworks desired NY

Description:
4924
Job title: Design Drafter
Number of openings: 1
Position location: East Aurora - NY
Employment type: Contract
OT exempt: No


Shift: 1st
Education Requirement: Associate’s Degree

Additional Shift Details:
Driving on company time?: No
Minimum Years of Experience: 8 years
Maximum Hourly Pay Rate: 35-40 max
Start Date: 09/11/2017
Tentative End Date: 09/28/2018

Function:

Reporting to the Supervisor of Drafting and under technical direction from Engineering the Mechanical Design Drafter, assumes the responsibility for layouts, models, and mechanical hardware drawings in support of development and product design. Tasks include organization and planning of the number and types of drawings, part selection, parts lists generation, developing complex design layouts and related packaging support documentation. The incumbent is responsible for performing Tolerance Analysis in conjunction with utilization of GD&T methodologies to meet both design, manufacturing, and inspection requirements. The incumbent must also have a working knowledge of configuration management control of product design.
Ideally experience and in-depth knowledge in utilization of NX Mcad design software is required. Additionally experience using 3D Mcad software package ie: Solidworks is a plus. Experiential knowledge of Teamcenter PLM is desirable as well.

NATURE AND SCOPE OF POSITION:
The incumbent will work closely with Design Engineering, developing their thoughts and sketches into layouts, drawings, and schematics. He / She should be capable of spatial visualization developing conceptual designs leading to the creation of design layouts for exploring possible design approaches. The incumbent will need the judgment to evaluate and present design alternatives, drawing knowledge from previous designs for incorporation into product and manufacturing ideas. The Design Drafter may have the latitude to make design decisions based on the confidence earned from their respective engineer. The incumbent will need to logically weigh these decisions and possess the judgment to know when to seek technical direction from the responsible Engineer.
At times it may be necessary for him/her to contact or participate in meetings with other disciplines to discuss design or fabrication requirements and feasibility. This interface includes but is not limited to Design Engineering, Product Engineering, Manufacturing Engineering, Shop and Lab, and possibly outside vendors. As part of this process, the Design Drafter may be involved as a member of concurrent product development teams. He/She must be aware of design to cost, manufacturability, and feasibility of assembly.

The duties consist of participating in the graphical evolution of new products from layout to drawings including correctness of proportion, arrangement of internal components, necessary dimensional information and material and/or process suggestions. The incumbent produces final drawings developed and dependent on 3D/Solid models working independently or in conjunction with others. The design drafting process requires the incumbent to utilize the Moog’s (MCAD) System(s) (NX Preferably, Solidworks, ) to produce a variety of drawings and layouts to enable better visualization, clearance checks, and also provide manufacturing information for Computer Aided Manufacturing (CAM) operations. Competent capability of the use of Moog’s MCAD and PLM Systems is essential.


Education: Associates degree in a Technical Field

Other Requirements

Perfect candidate will have fluids, actuator, space and defense experience.

Request status: Open
 
Job Number: MB-4924
Job Location: East Aurora, NY
Rate: 35-40/hr max
Duration: 12 month contract
Input Date: 09/28/2017
Last Updated: 10/03/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Electrical

Description:
ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Research aircraft systems and components as necessary to perform assignments.
• Design and develop engineering solutions in support of innovative concepts, and the replication and modification of existing electrical and electromechanical designs.
• Develop, analyze, and substantiate low to high complex repair solutions for mitigating all kinds of electrical issues.
• Provide design and repair engineering assistance in support of mechanical and composite projects when assigned.
• Create technical documents for certification, maintenance and operation of various types of projects.
• Produce structural, technical and sometimes market analysis for which FAA approval can be obtained to ensure compliance with all appropriate regulatory, customer, OEM, production and management requirements.
• Create various types of engineering drawings using common CAD software such as AutoCAD and SolidWorks.
• Perform mechanical and electrical assembly when assigned.
• Ensure all applicable customer, OEM, FAA, and maintenance requirements are met.
• Approve engineering documents within authorized signatory level.
• Train and assist other engineers in performance of their assigned tasks.
• Participate in the development of work statements and hour estimates in support of project proposals.
• Represent company on engineering technical matters with OEM’s, customers, operators and regulatory authorities.
• Interact in a professional manner with members of internal and external organizations.
• Independently evaluate, select, and adapt to situations. Modify techniques, procedures and criteria to solve problems encountered.
• Monitor and approve engineering use of Customer, OEM, and other technical data to ensure compliance with all appropriate regulations and requirements.
• Ensure projects are accomplished within a reasonable time frame as defined by a Project Lead or Engineering Management.
 
Job Location: Everett, WA
Input Date: 09/07/2017
Firm Name: APA SERVICES
Attention: Kami M Muehlberger
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Die Engineering Leads - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring Die Engineering Leads for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Conduct Stamping Simulation, Sheet metal Die Development, Die Compensation, Die Manufacturing, Die trial and Virtual Die Tryout in conjunction with Project Management and Customer Engineering teams
• Perform binder development and draw simulations to ensure safe panels per customer requirements and standards within program timing constraints
• Analyze spring back, surface abnormalities and other non-conformance and recommend compensation or other countermeasures
• Develop trim lines, die faces and break lines per customer standards and product requirements
• Understand GD&T and tolerance stack ups, make recommendations for to ensure feasible product can be released within program timing constraints
• Perform scrap shed analysis and enact countermeasures for non-conformance areas
• Provide feedback to die build source for optimal die processes and die designs
• Interact with customer Product teams and Project Management to ensure feasibility of all details within timing requirements
• Support of cost reduction/value engineering initiatives
• Use of software, including but not limited to Autoform, Dynaform, Omnicad, CATIA V5 R19, UG NX, and LS Dyna 5.7

Qualifications:

• B.S. in Materials Science, Mechanical Engineering, Industrial Systems Engineering, or relevant area of study Graduate degree is preferred
• 2 – 5 years of experience with Autoform, Dynaform, Omnicad, CATIA V5 R19, UG NX, and LS Dyna 5.7
• Understanding of modeling concepts that correlates with actual die construction
• Must be able to collaborate and work in a team environment with a high level of interpersonal skills
• Must be able to create technical reports and have excellent presentation skills
• Must have a basic understanding of sheet metal forming principals
• Keep up to date with latest die processes and tooling trends to maintain industry leading skills
• Extensive understanding of sheet metal forming principals, materials commonly used in today’s applications and be able to recommend material alternatives based on application and product geometry
• High level of analytical ability where problem solving is a must
• Excellent written and verbal communication and presentation skills

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40026
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/07/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Test Engineer

Description:
Electrical Test Engineer: Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns. Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired.

Experience should also include five years working on the testing of complex mechanical systems, testing of electrical systems and components such as motor controllers, actuator controls, & system controllers. Capability of working independently and is self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required. T
 
Job Number: CT38872
Job Location: Windsor Locks, CT, CT
Rate: 67.00
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Input Date: 09/06/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Huntsville, Al, Tucson, Az or McKinney, Tx
Sr. Electrical Engineer I - 39357
Hunstville, AL
Senior Designer or Electrical Engineer with understanding and wide application of technical theories, and concepts in digital design, with general knowledge of other related disciplines. The Senior Designer provides technical solutions to a wide range of difficult problems. This position will function in a multi-disciplined design team. The person will be the Responsible Engineering Authority (REA) for hardware design, fabrication, assembly, test, and integration of a circuit card. Designs include technology of processors, FPGAs, memory, and industry interfaces, such as PCIe, Ethernet, I2C, UART. Candidates can independently determine and develop approach to solutions to contribute to the completion of specific programs and projects.

Required Skills:
• A minimum of 4 years’ experience in Digital Design
• Proven ability to take a design concept from the block diagram or requirements level and develop a complete hardware design
• Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution.
• Experience with embedded test techniques, design for test, design margin analysis and circuit design for production • A strong advocate for process improvement
• A self-motivated and effective communicator • Experience in managing schedule and resources to meet assigned milestones • Ability to obtain and retain security clearance

Desired Skills:
• Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES)
• Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)
• Six Sigma specialist


Required Education (including Major):
Bachelor’s Degree in Electrical Engineering (MS preferred) or similar degree and meets the experience requirements
 
Job Number: 39357
Job Location: Huntsville, Al
Duration: 18 months
Start Date: ASAP
Input Date: 08/30/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1700 WELLS RD STE 1
City, State: ORANGE PARK, FL 32073-2373
Phone: 904/562-3215
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Duration: 1 year contract
Pay Rate: DOE ($50/hr - $55/hr)
Location: Grand Prairie, TX
Shift: First, 9/80
*The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years)*

Job Description:
-Analog engineer is required to design a power voltage card to convert voltages between mature subsystems.
-The power voltage card will need to fit within an existing space.
-This effort will require part selection, design review, and design release.
-The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-The engineer must be proficient in Cadence; have good communication skills.

Mandatory Skills:
-Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-Bachelors degree in Electrical Engineering with five or more years of experience.
-Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
-Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting.
-Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes.
-Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills.
-Proficiency with electronic analyzers and other trouble shooting tools is required.
-Ability to develop system and subsystem performance requirements.
-Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis.

REQUIRED Skill Matrix:
-Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. : (9-10 years)
 
Job Number: 7065
Job Location: Grand Prairie, TX
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 02/14/2017
Last Updated: 12/26/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power System Engineer

Description:
• System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing
• Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings
• Software Certification: Experience reviewing PSAC, CIA, SAS.
• Experience in software V&V.

Required Experience in the following:
• Electrical Power Generation, control and indicating
• Secondary Power Distribution, control and indicating
• Solid State Electrical Power.

Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Project Management

Skills/Experience:
• Configuration change management
 
Job Number: 24-174
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer

Description:
Role: Electrical Test Engineer

Location: Windsor Locks CT 06096

Duration:1 year+
•Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired.
•Experience should also include five years working on the testing of complex mechanical systems, testing of electrical systems and components such as motor controllers, actuator controls, & system controllers.
•Capability of working independently and is self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

Education Bachelors
 
Job Number: 52328
Job Location: Windsor Locks, CT
Input Date: 09/13/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bala
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronic Engineer

Description:
DESCRIPTION
We are currently seeking an Electrical Engineer with laboratory/R&D experience to work within design teams in Product and Lifecycle Management (PLCM) Business Line focused on products that save lives and maintain operational readiness for the military. This position is located in Columbus, OH.

A successful candidate in this position would assist in the design, assembly, and troubleshooting of products utilizing electromechanical systems. The candidate will contribute significantly to advancing current systems as well as the research and development of future systems. The responsibilities of the position are expected to grow rapidly as we have received significant interest from numerous clients. The candidate must appreciate a fast pace environment, have a desire to take immediate ownership of large portions of system development, and be effective in a small team or individual tasking.

The following are a list of probable tasks:
• Designing, fabricating, testing, installing, operating and maintaining complex electromechanical systems and subsystems for government programs including firmware and microcontrollers
• Develops, upgrades, tests, debugs, and implements systems
• Developing system architectures and circuit designs for product integration
• Identifies functional needs and requirements
• Performs systems design and analysis based upon requirements
• Prepares detailed specifications from which software will be written or electromechanical designs implemented
• Provides technical support and trains end users on assigned application systems, including on-call or in-field support as required.
• Ability to manage a small team to complete projects and tasks within time and budget
• Interfacing effectively in written and oral communications with other engineers, scientists, and customers. Occasional domestic travel is anticipated.

PLCM believes a background or interest in the following is beneficial for these positions:

• The candidate should be a well-rounded individual with the ability to switch between hands-on tasks and office based efforts. The development of many of our products are completed by small teams, thus the candidate must be comfortable working the entire life cycle of a R&D phase.
• Design of electromechanical systems utilizing firmware and microcontrollers.
• Experience with circuit design of embedded digital electronics
• Experience designing complex systems for medium scale production
• Familiarity with modifying current systems to quickly and cost effectively meet the needs of a client.
• Ability to quickly troubleshoot failure and knowledge and ability to communicate possible changes in procedures to address failures.

THE FOLLOWING REQUIREMENTS MUST BE MET TO BE CONSIDERED FOR THIS POSITION:
• Bachelor or Master's degree in Electrical Engineering or equivalent
• GPA of 3.0 or above.
• 3-5 years of experience in the laboratory focused in hands-on design and assembly of electromechanical systems.
• More than 2 years leading teams
• US Citizenship.
 
Job Number: 17-39004
Job Location: Columbus, OH
Rate: $50.00
Per Diem: SPLIT
Overtime: POSSIBLE
Duration: LT
Start Date: ASAP
Input Date: 08/31/2017
Firm Name: NESCO RESOURCE
Attention: Paul Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ElectroMechanical Engineer - Level III

Description:
ElectroMechanical Engineer - Level III

Orlando, FL
$53.00/Hr
1 Year Contract

MUST HAVE AN ACTIVE SECRET CLEARANCE

1st Shift


Description

Hardware ElectroMechanical packaging design engineer will be responsible for the hardware development for missile and/or fire control electronics: specifically printed wiring board (PWB) and circuit card assembly (CCA) design as well as general packaging support. Activity will require cross functional coordination to complete PWB/CCA hardware design and integration for the designated weapon system. General qualifications: Researches, develops, and designs component, equipment, and networks for military applications. Candidate must have experience CCA and PWB design as well as the associated components and connectors.


Skill/Experience/Education

Mandatory:

Candidate must have a Bachelors degree from an accredited college in a related discipline, Proficient with Pro-E and/or Creo or Catia software.

Desired:

CREO,
 
Job Number: 7719
Job Location: Orlando, FL
Rate: 53.00/Hr
Per Diem: Possible Split
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 10/23/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ElectroMechanical Engr - Level 3 / PWB / CREO / Catia / active secret FL

Description:
160067
Requirement #MFC-REQ-1452
Work Location Orlando, FL
Work Week 9/80-A
Needed Date 08/14/2017
End Date 08/13/2018
Number of Resources 4
Active Secret Clearance required

Title: ElectroMechanical Engr - Level 3

Description
Hardware ElectroMechanical packaging design engineer will be responsible for the hardware development for missile and/or fire control electronics: specifically printed wiring board (PWB) and circuit card assembly (CCA) design as well as general packaging support. Activity will require cross functional coordination to complete PWB/CCA hardware design and integration for the designated weapon system. General qualifications: Researches, develops, and designs component, equipment, and networks for military applications. Candidate must have experience CCA and PWB design as well as the associated components and connectors.

Skill/Experience/Education
Mandatory:

Candidate must have a Bachelors degree from an accredited college in a related discipline, Proficient with Pro-E and/or Creo or Catia software, Must have security clearance

Desired:

CREO

Max Pay Rate 53.00 USD

Shift 1st Shift
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
 
Job Number: JE-1452
Job Location: Orlando, FL
Rate: 53/hr max
Duration: 12 month contract
Input Date: 09/18/2017
Last Updated: 10/05/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Manufacturing Engineer - Aerospace

Description:
Electronic Manufacturing Engineer - Aerospace and Defense

Ingenium Technologies - San Diego, CA
Contract- Contract to Hire

Must be a US Person.

A Manufacturing Engineer - Contract - is needed for a proven and reliable world leader in Aviation Air-to-Ground Communications, Aircraft Systems and Tactical Reconnaissance Radars, as well as advanced high-resolution Surveillance Systems.

Responsibilities:

Support the design, first article, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all platforms. Assemblies will include surface mount as well as through hole technology and mechanical assembly

Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.

Specify and implement automation equipment and processes.

Identify and assist in addressing safety issues on the manufacturing floor.

Support manufacturing production planning and coordination, execution and operations process development.

Provide production support to assemblers and leads.

Document manufacturing processes and assembly work instructions in conjunction with T&O Planning.

Design shop aids and tooling to assist production.

Disposition non-conforming parts, identify root cause, and implement corrective and/or preventive action to reduce scrap and rework.

Collaborate with Design Engineering during prototype, development and first article manufacturing.

Clearly and effectively communicate both verbally and in written form to both technical and non-technical audiences, especially regarding manufacturing processes, engineering issues and proposed changes, and quality issues and dispositions.


Software Requirements:

Experience with SAP, Microsoft Office Project and Visio
Database knowledge in Oracle and FileMaker


Required Experience:

5 to 15 Years experience in aerospace composite manufacturing, processing and materials knowledge.
Experience with IPC & MIL standards, including: IPC/WHMA-A-610 and 620 , J-STD-001
Knowledge of the requirements for Soldered Electrical and Electronic Assemblies, MIL-STD-1553 %u2013 Digital Time Division Command/Response Multiplex Data Bus, MIL-STD-1760 %u2013 Aircraft Electrical Interconnection System, SAE-AS39029 (MIL-C-39029)
Experience implementing capital equipment in factory environment.
Experience with MRP systems, eg SAP or MTO/WDS. Experience with Microsoft Office Project and Visio.
Experience with programming and databases, e.g. Oracle and FileMaker. Knowledge of SQL.
Experience with process mapping and demand flow technology
Strong background in electro-mechanical assemblies.
Six Sigma Green Belt preferred


Required Education: Bachelor's degree is required.

Position: Contract to Hire, 6mos or longer


Location: San Diego, CA


Employment Criteria : This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Citizen, who does not work for a foreign company/foreign government/foreign governmental agency or organization, and is in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 95014
Job Location: San Diego, CA
Rate: $55.00
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: Now
Input Date: 09/13/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: David Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Level 2 with active secret TX

Description:
159734/1412
Title: Embedded S/W Engineer - Level 2
Grand Prairie, TX
80/hr max
Active secret required to start

Description
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Must have Secret clearance in place prior to submittal of resume. Resume must have status of clearance stated.

Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, Linux (Red Hat), and Embedded SW Engineering
Desired:

Razor (CM Control), Domain Knowledge of Air and Missile Defense, Seeker Programming and/or Integration, Hardware-in-the-Loop (HWIL) - Unit Under Test Experience, Embedded SW Engineering


US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Razor (CM Control) 0-3 Years No
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years No
Seeker Programming and/or Integration 4-5 Years No
Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years No
Embedded SW Engineering 4-5 Years Yes


Interview Required Yes
Max Pay Rate 80/hr
Shift 1st Shift
OT Allowed No
Travel Yes (Various)
Travel Description Travel to customer locations (as required)
Exempt
 
Job Number: JE-1412
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 07/21/2017
Last Updated: 09/25/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Contract to Hire

Seeking an embedded software engineer to support development, maintenance, integration and lab/flight testing of software for the Multispectral Targeting System (MTS) family of programs.
The software engineer will work with program engineers of multiple disciplines to help achieve program goals under the direction of SW project and technical leads.

Requirements:
Requires 15+ years of embedded software experience in C/C++ or Ada.
Requires excellent teaming and communications skills.
Must be willing to work in lab environments and support software, firmware, and hardware integration and testing.

Preferred:
Prior experience working for a defense contractor is desired.
Current or prior DOD clearance is a plus.
Experience on an Agile/Scrum team is helpful.
 
Job Number: TX39443
Job Location: McKinney, TX
Input Date: 09/08/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Gina Smith
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80, no OT
Travel: Yes, to customer locations as required

** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-US DOD Secret Clearance Required (4-5 years experience)
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
-C/C++ (4-5 years experience)
-Linux (Red Hat) (4-5 years experience)
-Embedded SW Engineering (4-5 years experience)

Desired:
-Razor (CM Control)
-Domain Knowledge of Air and Missile Defense (4-5 years desired)
-Seeker Programming and/or Integration (4-5 years desired)
-Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT) - (4-5 years desired)
 
Job Number: 7561
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 06/21/2017
Last Updated: 10/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-US DOD Secret Clearance Required (4-5 years experience)
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
-C/C++ (4-5 years experience)
-Linux (Red Hat) (4-5 years experience)
-Embedded SW Engineering (4-5 years experience)

Desired:
-Razor (CM Control)
-Domain Knowledge of Air and Missile Defense
-Seeker Programming and/or Integration
-Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT)
 
Job Number: 7295
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 04/11/2017
Last Updated: 10/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 3

Description:
Embedded Software Engineer - Level 3

Location: Grand Prairie, TX
Pay Rate: $70/hr - $80/hr (DOE)
Duration: 6+ Month Contract
Shift: First, 9/80
*Active SECRET Clearance is required*

Description
As a Patriot Missile (PAC-3) Hardware In The Loop (HWIL) Software Engineer, the ideal candidate will have experience with real time systems, experience with real time embedded operating systems and software, Unit Under Test (UUT) programming & integration, open architecture software development, past integration of disparate systems, and Missile Seeker integration experience. Understanding of hardware interfaces and familiarity with missile subsystems is a plus. Candidates must be able to apply the appropriate standards, processes, procedures, and tools throughout the development life cycle.

Skill/Experience/Education
Mandatory: (must meet all requirements)
The candidate should be a self-starter and possess all of the following skills:
• Secret Clearance Required: 4+ years of experience
• BS in Computer Science, Software Engineering, or Related Field: 4+ years of experience
• C/C++: 4+ years of experience
• ADA: 4+ years of experience
• Linux (Red Hat): 4+ years of experience
• Domain Knowledge of Air and Missile Defense: 4+ years of experience
• Seeker Programming and/or Integration: 4+ years of experience
• Hardware-in-the-Loop (HWIL) – Unit Under Test (UUT) Experience: 4+ years of experience

Desired:
• Razor (CM Control): 0-3 years of experience
 
Job Number: 7137
Job Location: Grand Prairie, TX
Rate: 70-80
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 03/02/2017
Last Updated: 10/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine Control Logic Analyst

Description:
Engine Control Logic Analyst

Jupiter, FL
1 year Contract
Pay Rate: $60.00-70.00/Hr

1st Shift

Duties:
Engine Control Logic Analyst to support Hypersonics program.



** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage, Sterling or Talentwise. See attachment for specific background check onboarding requirements **



Keywords:

-Hypersonics

-Control Systems

-Requirements

-Programming

-Embedded Software

-Logic

Skills:
Required:

Familiarity with industry standards for engine control software design (P&W SEPG-0-000, NASA NPR 7150.2A, ISO 12207, DO-178C or other industry standard).
Good technical writing skills.
Project/schedule management skills.
Requirements generation skills.
Ability to translate engine operation requirements into engine control logic flow diagrams.
Proficiency with MS Office: Word, EXCEL and Powerpoint.
Desired:

Experience/proficiency with the following tools and computing platforms is desired: Windows, Alpha/VMS, C Programming, Pictures-to-Code, Matlab/Simulink, Unigraph.
Experience with linear model generation and control loop gain sizing and stability analysis.
Familiarity with Aerojet Rocketdyne procedures (AR ENG-P-4.03.04)


Education:
B.S. or M.S. in Mechanical or Aerospace Engineering
 
Job Number: 7883
Job Location: Jupiter, FL
Rate: 50-70
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/12/2017
Last Updated: 11/27/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine Control Logic Analyst

Description:
Keywords:
-Hypersonics -Control Systems -Requirements -Programming -Embedded Software -Logic

Skill Required:
Familiarity with industry standards for engine control software design (P&W SEPG-0-000, NASA NPR 7150.2A, ISO 12207, DO-178C or other industry standard).
Good technical writing skills.
Project/schedule management skills.
Requirements generation skills.
Ability to translate engine operation requirements into engine control logic flow diagrams.
Proficiency with MS Office: Word, EXCEL and Powerpoint.

Desired:
Experience/proficiency with the following tools and computing platforms is desired: Windows, Alpha/VMS, C Programming, Pictures-to-Code, Matlab/Simulink, Unigraph.
Experience with linear model generation and control loop gain sizing and stability analysis.
Familiarity with Aerojet Rocketdyne procedures (AR ENG-P-4.03.04)

Education:
B.S. or M.S. in Mechanical or Aerospace Engineering
 
Job Number: SH375839
Job Location: Jupiter, FL
Rate: 70
Duration: 2 months
Start Date: ASAP
Input Date: 09/12/2017
Firm Name: CDI CORPORATION
Attention: Stephen Harwan
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine Control Logic Analyst with active secret URGENT FL

Description:
160331/7443403

Job Title: Engine Control Logic Analyst
Keywords:
Number of Positions: 3

Remaining Positions: 3

Duties:
Engine Control Logic Analyst to support Hypersonics program.



** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage, Sterling or Talentwise. See attachment for specific background check onboarding requirements **



Keywords:

-Hypersonics

-Control Systems

-Requirements

-Programming

-Embedded Software

-Logic

Skills:
Required:

Familiarity with industry standards for engine control software design (P&W SEPG-0-000, NASA NPR 7150.2A, ISO 12207, DO-178C or other industry standard).
Good technical writing skills.
Project/schedule management skills.
Requirements generation skills.
Ability to translate engine operation requirements into engine control logic flow diagrams.
Proficiency with MS Office: Word, EXCEL and Powerpoint.
Desired:

Experience/proficiency with the following tools and computing platforms is desired: Windows, Alpha/VMS, C Programming, Pictures-to-Code, Matlab/Simulink, Unigraph.
Experience with linear model generation and control loop gain sizing and stability analysis.
Familiarity with Aerojet Rocketdyne procedures (AR ENG-P-4.03.04)


Education:
B.S. or M.S. in Mechanical or Aerospace Engineering


Skills:
Required

ENGINE CONTROLSCONTROL SYSTEMSREQUIREMENTS ANALYSISEMBEDDED SOFTWAREAEROSPACE


State/Province: Florida
City/Town: Jupiter

Start Date: 10/02/2017 Hours Per Week: 40.00
Est. End Date: 12/31/2017 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7443403
Job Location: Jupiter, FL
Rate: 70/hr max
Duration: 12 month contract
Input Date: 09/25/2017
Last Updated: 10/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine/APU, ECS, Fuel Systems Engineer

Description:
Engine/APU, ECS, Fuel Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Required Experience in the following:
• System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing
• Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings
• Software Certification: Experience reviewing PSAC, CIA, SAS. Experience in software V&V Required Experience in the following:
• Engine Systems (FADEC)
• Environmental Control Systems
• APU systems
• Fuel systems (Distribution and Indication)

Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Exposure to Part 33 certification
• Project Management Skills/Experience:
• Configuration change management
 
Job Number: 7519
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Software - 4 with secret clearance to start FL

Description:
1607
Engineer Software - 4 (Job Number: 17015771)

Number of Openings: 1

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Jul 31, 2017

Title: Engineer Software - 4 (5)

Pay Rate: $57.00- $62.00/hr

Location: Melbourne, Fl.

Work Schedule: 9/80

Duration: 6 months

Clearance: Requires Interim Secret clearance to start

Designs, develops, documents, tests and debugs applications software and systems that contain logical and mathematical solutions. Conducts multidisciplinary research and collaborates with equipment designers and/or hardware engineers in the planning, design, development, and utilization of electronic data processing systems for product and commercial software. Determines computer user needs; analyzes system capabilities to resolve problems on program intent, output requirements, input data acquisition, programming techniques and controls; prepares operating instructions; designs and develops compilers and assemblers, utility programs, and operating systems. Ensures software standards are met

Duties include:

* Requirements analysis and decomposition (DOORS)
* Software Test Description (STD) Development
* Ada 95, C, C++, Python, Bash, Java, and other scripting language use may be required
* Use of secure coding principles
* Security+ Certification preferred


Basic Qualifications:
Bachelor STEM degree
9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.
5 years experience in Ada 95 software development 3 years experience in C++ software development
Experience in Requirements Analysis and decomposition (DOORs)
Use of secure coding principles


Preferred Qualifications:
Master STEM degree
Expert in Ada 95 software development
Expert in C++ software development
3+ years experience in Requirements Analysis
3+ years of using secure coding
Security + Certified
 
Job Number: MB-17015771
Job Location: Melbourne, FL
Rate: 62/hr max
Duration: 6 month contract
Input Date: 08/02/2017
Last Updated: 09/25/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Contractor/Checker

Description:
Engineering Contractor/Checker

Location: Savannah, GA
Pay Rate: $50/hr - $55/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Review 3D engineering data for conformance to Company requirements as directed.
-Check parts for fit, form and function to the extent that information is available.
-Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed.
-Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding Company drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of Company parts list & PdocM, a plus.
• Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.
• Knowledge of Excel, Share Point software, Microsoft Office a plus

Job Description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 7680
Job Location: Savannah, GA
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/25/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Specialist / Control Systems – Level III

Description:
Location: Huntsville, AL
Rate: $40.00 - $47.00/HR
Duration: 1 year contract


** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Job Overview:
Without appreciable direction, performs control system engineering assignments requiring a broad understanding of controls engineering principles and a working knowledge of other related disciplines to analyze rocket propulsion system and component performance.

Responsibilities:
60% - Use system simulation software tools including custom software applications in Matlab/Simulink and C++ computer language to evaluate control system performance. Apply advanced techniques and extension of theories, precepts, and closed loop control theory and related sciences to predict system stability and transient/steady state performance of rocket propulsion systems. Support material review boards to develop exoneration paths for non-conforming hardware used in flight systems. Plans, conducts, and directs development of software applications and a wide range of math models using several programming languages (Fortran, C/C++, VisualBasic, etc.) and other software, using advanced techniques in controls engineering to optimize propulsion systems.

30% - Support solid rocket motor development and verification testing through test setup, conduct, and data reduction. Assesses feasibility of proposed products, testing and analyses and reviews results of other team members for technical accuracy.

10% - Documents work in reports and presentations, and presents results to large diverse audiences that include customer and industry technical experts. Reviews work of peers and less experienced engineers.

Skills:
-Rocket propulsion industry technical experience preferred, especially with control systems.
-Experience with Matlab/Simulink.

Education:
-Bachelor's Degree in Electrical or Mechanical Engineering or appropriate controls related discipline/science and nine years of directly related industry experience required (or equivalent combination of education and experience).
-Advanced degree preferred.
-Coursework and experience in propulsion systems and linear/digital controls required.
 
Job Number: 7753
Job Location: Huntsville, AL
Rate: $40.00 - $47.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 08/25/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Specialist / Control Systems – Level III

Description:
Location: Sacramento, CA
Rate: $40.00 - $47.00/HR
Duration: 1 year contract


** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Job Overview:
Without appreciable direction, performs control system engineering assignments requiring a broad understanding of controls engineering principles and a working knowledge of other related disciplines to analyze rocket propulsion system and component performance.

Responsibilities:
60% - Use system simulation software tools including custom software applications in Matlab/Simulink and C++ computer language to evaluate control system performance. Apply advanced techniques and extension of theories, precepts, and closed loop control theory and related sciences to predict system stability and transient/steady state performance of rocket propulsion systems. Support material review boards to develop exoneration paths for non-conforming hardware used in flight systems. Plans, conducts, and directs development of software applications and a wide range of math models using several programming languages (Fortran, C/C++, VisualBasic, etc.) and other software, using advanced techniques in controls engineering to optimize propulsion systems.

30% - Support solid rocket motor development and verification testing through test setup, conduct, and data reduction. Assesses feasibility of proposed products, testing and analyses and reviews results of other team members for technical accuracy.

10% - Documents work in reports and presentations, and presents results to large diverse audiences that include customer and industry technical experts. Reviews work of peers and less experienced engineers.

Skills:
-Rocket propulsion industry technical experience preferred, especially with control systems.
-Experience with Matlab/Simulink.

Education:
-Bachelor's Degree in Electrical or Mechanical Engineering or appropriate controls related discipline/science and nine years of directly related industry experience required (or equivalent combination of education and experience).
-Advanced degree preferred.
-Coursework and experience in propulsion systems and linear/digital controls required.
 
Job Number: 7752
Job Location: Sacramento, CA
Rate: $40.00 - $47.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 08/25/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician 4 Computer Aided Metrology

Description:
Work Schedule: 4/10 - (2nd shift)

Engineering Technician 4 Computer Aided Metrology.

We are looking for highly motivated individuals that are willing to work in a fast paced manufacturing environment covering multiple programs. Candidate will be required to use highly sophisticated computer aided metrology equipment that will require knowledge of multiple software applications. Candidate will have responsibility for overseeing lesser skilled employees assisting them with their training and development in the computer aided metrology field.

Basic Qualifications:

High School Diploma/GED plus 10 years of experience.

Position requires Assembly Tooling and or composite tooling background with assorted Computer-Aided Measurement Systems (C.A.M.S.) and an emphasis on (FARO-LEICA-API) Laser Tracking Interferometer or non-Interferometer Systems (minimum 10 years). Experience in data collection for the Validation/Verification of Tooling and Engineering. This position requires experience working with Manufacturing Engineering developing solutions to highly complex mechanical problems. Also working with Engineering for dispositions and best methodology to make repairs. Analyze and advise on data results. Must be proficient in Microsoft suite. Ability to work on high ladders and portable platforms, heavy lifting as well as standing for long periods of time. Candidate may be required to work any shift as well as overtime as necessary. High school diploma or equivalent required. Working knowledge of Photogrammetric laser radar systems and laser scanning systems and articulating arms. Theodolite systems are also required. Computer aided graphic interfaces such as Verisurf X, SA and Maya matrix Build!IT and Polyworks.

Preferred Qualifications:

Familiar with multiple computer aided metrology systems such as laser trackers, articulated arms, scanners, projection lasers etc. Experience and background in design of tools and assemblies is also very much desired. Experience in 3D modeling systems such as Catia UG is a plus. Preferred experience and the ability to analyze collected data to computer models using CATIA V5 R22 or later. Assist in the assignment of personnel to support all Aerospace Systems computer aided measurement tasks. Advise and Train personnel in the usage of C.A.M.S. with O.J.T in addition to classroom time and assist in the certification testing. Implement Lean Thinking in the operations and documentation of C.A.M.S. Experience in reverse engineering and model building from collected data.
 
Job Number: 1614
Job Location: Palmdale, CA
Rate: DOE
Duration: 12 Months
Input Date: 08/21/2017
Last Updated: 09/25/2017
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 3

Description:
Equipment & Tool Engineer 3

Location: Ridley Park, PA
Duration: 6 months

Description:
Develops moderately complex specifications, conceptual and final designs, cost estimates and provides maintenance support for the procurement or modification of equipment systems (e.g., ovens, autoclaves, furnaces, tank lines, etc.). Reviews specifications and/or designs to assess compliance with customer requirements, codes and applicable regulations by applying knowledge of process engineering, practices, and materials. Communicates problems and issues to others for resolution. Integrates the activities of multiple engineering disciplines, outside consultants and government agencies. Performs moderately complex conceptual analysis to determine the cause of asset failures and reduction in asset capacity by using reliability tools and methods (e.g., life cycle analysis, condition based maintenance, root cause failure methodology, mean time between failures, fault tree analysis, etc.). Performs studies and make recommendation for disposition of assets. Creates cost estimates for the acquisition and/or installation or modification of equipment to support customer budget and business planning activities for current and future year requirements. Creates and reviews equipment designs through the application of engineering methodologies for the acquisition, creation, or modification of equipment.

Education / Experience:
Degree required per Supplier guidelines for Engineering.
Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, ABET is the preferred, although not required, accreditation standard.

Skills:
Category Name Required Level
Software Skills AutoCad Yes Intermediate
Software Skills Maximo Yes Intermediate
Software Skills MS-Office Products Yes Intermediate

Skill Code:
66U-Designer Engineer
 
Job Number: 17-15401
Job Location: Ridley Park, PA
Per Diem: Split
Overtime: possible
Duration: 6 mos
Start Date: 9/29/17
Input Date: 09/01/2017
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment and Tool Engineer

Description:
Develops moderately complex specifications, conceptual and final designs, cost estimates and provides maintenance support for the procurement or modification of equipment systems (e.g., ovens, autoclaves, furnaces, tank lines, etc.). Reviews specifications and/or designs to assess compliance with customer requirements, codes and applicable regulations by applying knowledge of process engineering, practices, and materials. Communicates problems and issues to others for resolution. Integrates the activities of multiple engineering disciplines, outside consultants and government agencies. Performs moderately complex conceptual analysis to determine the cause of asset failures and reduction in asset capacity by using reliability tools and methods (e.g., life cycle analysis, condition based maintenance, root cause failure methodology, mean time between failures, fault tree analysis, etc.). Performs studies and make recommendation for disposition of assets. Creates cost estimates for the acquisition and/or installation or modification of equipment to support customer budget and business planning activities for current and future year requirements. Creates and reviews equipment designs through the application of engineering methodologies for the acquisition, creation, or modification of equipment.

Candidate must state level of proficiency (beginner, intermediate or advanced) in the following required skills:
Category Name Required Level
Software Skills AutoCad Yes Intermediate
Software Skills Maximo Yes Intermediate
Software Skills MS-Office Products Yes Intermediate

Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, ABET is the preferred, although not required, accreditation standard.

Must be US Person for purposes of Export Compliance.
 
Job Number: 39374
Job Location: PA
Rate: 49/hour
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: asap
Input Date: 09/05/2017
Last Updated: 09/11/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FMS engineers (Systems and/or Software Engineers)(URGENT)

Description:
About Enea

Enea is a global supplier of network software platforms and world class services, with a vision of helping customers develop amazing functions in a connected society. We are committed to working together with customers and leading hardware vendors as a key contributor in the open source community, developing and hardening optimal software solutions. Every day, more than three billion people around the globe rely on our technologies in a wide range of applications in multiple verticals – from Telecom and Automotive, to Medical and Avionics. We have offices in Europe, North America and Asia, and are listed on Nasdaq Stockholm. Discover more at www.enea.com and start a conversation at info@enea.com.

FMS engineers (Systems and/or Software Engineers)

Job Requirements:

Significant Avionics FMS or Flight Controls software experience is required

Software experience that can also write Low and Higher Level Requirements and associated tests. Debugging Software on target hardware to obtain root cause is also a plus

Undergraduate or Graduate degree in Computer Science, Computer Engineering, Electrical Engineering, or related scientific discipline

Working knowledge of high-order programming languages (C, Ada, C++, Matlab/Simulink, etc.)

Demonstrated teamwork and leadership abilities

Strong communication and presentation skills

Strong object oriented language (C++, C#, Python, etc.) and software development methodologies (Waterfall, Agile, etc.)

Strong background with GUI a plus!

Embedded software experience is required

Knowledge of DO-178 Development Standards
 
Job Number: WW082417RC
Job Location: Cedar Rapids, IA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 6 MONTHS
Start Date: ASAP
Input Date: 09/28/2017
Last Updated: 10/04/2017
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Controls -

Description:
Johnson Service Group is seeking a Flight Test Controls for a 15 month contract in West Palm Beach, FL!

The applicant will need to work in West Palm Beach, FL for the first four to six months of the assignment in order to become familiar with the aircraft and the test requirements. The applicant will then likely be expected to move to Patuxent River, MD as the program shifts testing to be conducted from there.

Description:

Plan, conduct, manage and report flight control systems and handling qualities flight tests.
Test planning function involves determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
These details are written into published test plans. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
Large volumes of gathered flight data are processed, analyzed, and reported. These results are written into published test reports.
Work closely with the handling qualities and flight controls design engineers to become familiar with the flight control system hardware components and software, specifically control law design. Quickly identify problems on the test aircraft, troubleshoot the issue, and work with design engineering to implement a solution.
Utilize Mat lab to analyze flight test data and work with control laws.
Fly on board experimental aircraft to conduct test flights, modify software flight test variables, and collect data.
Experience:

Minimum of a Bachelor's degree in Aerospace Engineering, Mechanical or Electrical Engineering. Master’s degree a plus.
Minimum of 4 years of fixed/rotary wing flight control systems and handling qualities flight test engineering experience.
Fly-By-Wire experience preferred. Analytical thinking, troubleshooting, problem solving, and communication--written and oral. Technical writing.
Matlab/Simulink, Microsoft Office applications. General aviation knowledge; pilot license is preferred.


Additional Notes

The job involves significant teamwork and coordination with flight test co-workers in a variety of disciplines (pilots, mechanics, inspectors, instrumentation and data technicians), qualification or certification authority representatives and subject matter expert design engineers. The applicant will also team with design engineering by participating in simulation testing. Good interpersonal skills are imperative. Personal flexibility is required to occasionally support unusual working hours.
 
Job Number: 356488
Job Location: West Palm Beach, FL
Rate: $39hr
Per Diem: yes
Overtime: possible
Duration: 15 months
Start Date: asap
Input Date: 08/04/2017
Last Updated: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

Essential Functions:
Coordinate test and certification requirements.
Author flight test and ground test plans including test hazard analysis.
Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
Support instrumentation installation as required.
Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
Support flight and ground test conduct and data collection.
Analyze test data and evaluate compliance with regulations.
Prepare certification test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 11/30/2017
Last Updated: 12/07/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Software Engineer

Description:
DUTIES:Simi Valley, California 93065

• Develop System Test Plans, execute simulator and system flight tests, and document test results. This includes determining, communicating, and documenting flight test objectives, and developing test cards accordingly.

• Participate in flight readiness reviews, test event briefs, and post-test debriefs with UAV Operators and Observers.

• Coordinate the use of test ranges with UAV Operators and Observers.

• Ensure test assets are prepared to support testing, including checking that product hardware and software are properly configured, test cards and procedures are written, equipment is operational, batteries are charged, etc.

• Participate in test activities, fill in test data sheets, and transfer telemetry files to the network.

• Debrief engineering and management team on results of flight and simulator tests.

• Capture test failure details in defect reports, using an issue tracking system, like Bugzilla or JIRA.

• Position may require up to 25% travel.



QUALIFICATIONS:

• Bachelor’s Degree (strongly preferred) from an accredited University in Electrical Engineering, Software Engineering, Aerospace Engineering, or a related discipline.

• 7+ years of experience in multiple engineering projects including research and development efforts, with a focus on unmanned aircraft systems, simulation, integration, and test. Demonstrated ability to successfully contribute to successful short term projects (3 – 9 months).

• Familiarity with unmanned aircraft systems, including avionics, power, and Ground Control Stations (GCS’s).

• Minimum 3 years of experience conducting system tests or flight tests.

• Ability to develop ad hoc tests to troubleshoot test failures.

• Ability to analyze test data using software tools like MATLAB or Excel.

• Desired hands on lab experience in test engineering, including use of test and measurement equipment.

• Strong computer skills including Microsoft Office, engineering analysis tools (e.g., MATLAB, Simulink), and software development environments (e.g., Visual Studio).
 
Job Number: WW081817AERO
Job Location: Simi Valley, CA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 YEAR
Start Date: ASAP
Input Date: 08/18/2017
Last Updated: 10/04/2017
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Front End Developer

Description:
Front End Developer
Location: Centennial, CO
Pay Rate: DOE
Duration: 3+ months (6-12 months possible)
**MUST be a U.S. CITIZEN**
Summary:
As a Front End Developer, the ideal candidate will be responsible for the client side of our application. Your primary focus will be to implement responsive UI components, with a focus on performance. Your main duties will include creating Wireframes and Prototypes and modules and components and coupling them together into a functional app. You will work in a team with back-end developers, and communicate with the REST API using standard methods.
The initial project is to design, create and deliver a working wireframe to prototype to obtain customer acceptance. This effort will take 3-4 months. If the prototype is successful, the project will continue towards complete automation, which is estimated to be another 6-9 months.
Responsibilities Include:
• Work with Scrum Master, Product Owner and key stakeholders to identify the solutions that meet their needs
• Collaborate with business users and technology partners at all levels
• Provide direction for testing of new functionality
• Assist in user story grooming with product owner, business analyst to obtain story sign-off
• Ability to take user stories that can be created into quick interactive prototypes
• Concept, storyboard, wireframe and prototype user experiences on web app
• Provide valuable insight into front end development best practices, trends and techniques
REQUIREMENTS:
• Bachelor's degree in Information Science/Information Technology, Computer Science, Engineering or related experience.
• 5+ year’s software development experience.
• Deep knowledge of AngularJS practices and commonly used modules based on extensive work experience.
• Concept, storyboard, wireframe and prototype user experiences on web apps.
• Proficiency with testing tools (Karma, Jasmine).
• Creating custom, general use modules and components which extend the elements and modules of core AngularJS.
• Experienced in Agile methods using Scrum.
• JIRA experience or knowledge of preferred
 
Job Number: 7801
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 3+ mos
Start Date: ASAP
Input Date: 08/22/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware Systems Test Automation Engineer

Description:
About Enea
Enea is a global supplier of network software platforms and world class services, with a vision of helping customers develop amazing functions in a connected society. We are committed to working together with customers and leading hardware vendors as a key contributor in the open source community, developing and hardening optimal software solutions. Every day, more than three billion people around the globe rely on our technologies in a wide range of applications in multiple verticals – from Telecom and Automotive, to Medical and Avionics. We have offices in Europe, North America and Asia, and are listed on Nasdaq Stockholm. Discover more at www.enea.com and start a conversation at info@enea.com.

Do you want to help change the world? If so, read on…
We are currently seeking a Hardware Reliability Test and Automation Engineer who can really shine! This important role supports the test automation/hardware reliability verification effort and will contribute to the business goal of ensuring the most efficient, and reliable microinverter systems, by establishing the most effective test practices.

What you can look forward to:
Automating data collection and analysis to achieve optimal results
Working with cross functional teams to resolve issues in a timely manner
Applying reliability testing principles and practices towards completion of goals
Developing detailed understanding of product design and implementation
Applying product knowledge and reliability testing principles towards the development of test software for data collection and analysis in a very large reliability test environment
Performing unit test of own code, conduct code review and support existing test software
Facilitating the efficient collection of test data and report test outcomes by collecting, analyzing, interpreting, summarizing and displaying data
What you will need to do it well:
BS/MS in Electronic Engineering, Computer Science or equivalent
5+ years recent experience in a senior role in the area of product verification or manufacturing test development
Experience with Design of Experiments (DOE) and Reliability testing preferred. HALT/HASS, Relex or Reliasoft knowledge is a plus (+)
Experience with Python, C++/C# or other object-oriented programming language is required. Python is preferred. Test automation experience is a plus (+)
Some experience with power supplies, inverters or solar power is strongly desired
Background in Hardware Debugging and Hardware Quality Assurance Process
Extreme attention to detail
Good working knowledge of process improvement
 
Job Number: WW090717ENP
Job Location: Petaluma, CA
Per Diem: YES
Overtime: YES
Duration: 1 YEAR
Start Date: ASAP
Input Date: 12/04/2017
Last Updated: 12/07/2017
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Image Processing Algorithm Engineer

Description:
MAJOR PURPOSE
Image Processing, Image Science, Algorithm, Computer Vision, Infrared, Sensor, Target, Signal Processing
Military infrared imaging technology is advancing rapidly. This is enabling the use of novel image processing algorithms to provide new benefits to the warfighter. The Client is the industry leader in state-of-the art long range infrared sensor systems. We are seeking a motivated and talented engineer to participate with and contribute to a development team that working on advanced image processing and computer vision algorithms and implements them in real-time military and space systems. The successful candidate will combine knowledge of image processing / computer vision algorithms and real-time coding architectures to propose and develop solutions for next generation military systems. These algorithms and solutions will be used across multiple Client Technologies companies. The candidate must be a self-starter and able to handle multiple tasks in parallel, collaborating with other engineering teams across multiple Client Technologies divisions.

MAJOR FUNCTIONS
Responsibilities will include
• Research and develop advanced image processing and computer vision algorithms, such as image restoration, scene segmentation, target detection, and data fusion.
• Utilize an expertise and training in real-time coding methods, architectures and languages to implement advanced algorithms as highly optimized code in real-time processors.
• Participate in development teams that design and implement real-time image processing for military systems. Teams may span multiple Client Communications companies.
• Assist in designing image processing system architectures and evaluating image processing algorithms.
• Identify cutting-edge image processing or computer vision algorithms that can enhance new or existing imaging systems

EDUCATION/EXPERIENCE/LICENSES
Education:
• MS in Electrical Engineering / Computer Engineering / Computer Science / Physics or Mathematics with 3 years experience.
Required Experience
• Minimum 3 years industry and/or research experience developing algorithms for image/video processing, pattern recognition and computer vision applications.
• Expertise in machine learning, object detection and estimation, video fusion, image restoration and scene segmentation algorithms.
• Experience in system or computer vision modeling, simulations and algorithm performance evaluation.
• Algorithm prototyping and performance evaluation in Matlab and/or Python.
• Algorithm implementation in a high level language (C/C++/Java).
Desirable Experience
• An understanding of imaging sensors in any domain – Visible, IR, UV, X-ray, CT, Ultrasound etc.
• Experience in real-time programming, parallel and distributed computing, CUDA and VHDL.
• Experience in Visual Studio and Qt on Windows and Linux platforms.
• Experience with Altera or Xilinx development tools.
• Experience in software/firmware development life cycles.
 
Job Number: 17-782-8746
Job Location: Midwest
Rate: $70.00 to $90.00/per hour
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Level II Engineer

Description:
* This position will be a little bit of everything (programming, networking, hardware, software, troubleshooting, design/redesign, etc.)

Summary:

This position is responsible for providing professional systems engineering service and technical support to the Maintenance & Operation Department for the re-design, modification, re-engineering and retro-fitting of level 2 equipment and systems to improve quality and productivity under the direction of the L2 Supervisor

Job Description:

> Analyzes and defines level 2 equipment problems to improve quality and productivity, repair damaged equipment, improve systems performance, and improve production line up-time under the direction of the Level 2 Supervisor.
> Re-designs and re-engineers Level 2 systems that need upgrading, poorly designed or is incorrectly used in order to improve quality and productivity following the instructions of the Level 2 Supervisor.
> Investigates and analyzes Level 2 systems problems, defines and scopes projects, writes engineering reports, makes cost estimates, obtains bids, obtains approval to purchase necessary equipment materials, and works with Maintenance, Operations and plant personnel to retro-fit and install under the direction of the Level 2 Supervisor.
> Regularly monitors process systems data collection and archiving to ensure data integrity.
> Remains abreast of the latest process systems technologies, including: hardware, software, analysis, and design.
> Helps maintain adequate spare parts for critical process systems hardware and peripherals.
> Writes, modifies, tests and documents application programs to meet programming specifications following Level 2 Supervisor instructions.
> Other duties as assigned.
> Participation in continuous improvement programs.

Education / Experience:

> 2 – 5+ years’ experience with a Bachelor’s or Master’s Degree from approved University/College (BS/BA)
> Must be US Citizen (No Greencard, H-1B, etc)
> Programming Languages:
~ C, C++, .NET
~ XML, XSLT, SOAP, Javascript
~ HTML, PHP, ASP, ASP.NET
~ Familiar with COM and .NET Framework
~ Strong Object Oriented Programming background
~ Familiar with Client/Server application development
> Database Platforms:
~ SQL Server
~ Oracle
> Operation Systems:
~ Windows (all server and workstation versions)
~ Linux/Unix experience preferred

Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
www.globalamericanstaffing.com
 
Job Number: 033_2017
Job Location: Louisville, KY
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: Temp-to-Perm
Start Date: ASAP
Input Date: 07/19/2017
Last Updated: 09/14/2017
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Role: Manufacturing Engineer
Location: Cincinnati, OH 45242
Duration: 4 - 6+ months contract

Job Description:
Performs a variety of engineering work in planning, design and modification of fixtures, tools, and manufacturing processes. Resolves production problems and completes documentation on assigned parts. Interfaces with customers as needed. Generally, operates with appreciable latitude for non-reviewed action or decision-making. Has average to above-average knowledge and understanding of Electro-Chemical Machining (ECM) technologies and processes.
• Determines the sequence of operations in the manufacture of parts.
• Prepares and updates routers and operation sheets.
• Researches new manufacturing methods.
• Establishes manufacturing standards.
• Determines and troubleshoots manufacturing processes at all levels of complexity.
• Engineers tools, fixture and gauging modifications.
• Gives technical direction to CAD/CAM, production and inspection personnel as needed.
• Coordinates part inspection procedures with Quality Engineers.
• Addresses and documents cause and corrective action issues to prevent future problem occurrences.
• Interfaces with customers concerning design problems, part prints, etc.
• Performs other duties as assigned by management.

Requirements
• Bachelor’s Degree in mechanical engineering, manufacturing engineering, or equivalent experience and training.
• Minimum of 3 years’ experience (4-7 is preferred) as a Manufacturing Engineer II or the equivalent engineering experience in jet engine manufacturing processes, materials, and designs.
• Thorough knowledge of aerospace manufacturing and quality requirements.
• Average to above-average knowledge and understanding of ECM technologies and processes.
• Demonstrated ability to set up and operate ECM equipment.
• Proficient in the use of word processing, spreadsheet, and data base computer software (i.e. Word, Excel).
• Good interpersonal and communication skills.
 
Job Number: 52291
Job Location: Cincinnati, OH
Rate: open
Per Diem: Yes
Overtime: NO
Duration: 6+ months
Start Date: ASAP
Input Date: 09/11/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Arun
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (Level 3 and 4)- Multiple locations

Description:
Manufacturing Engineer 3 and 4

Location: Ridley Park, PA
Duration: 6+ months

Description:
Develops and implements production and tooling methodologies. Participates on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines. Develops, identifies and implements conceptual designs and maintains the program architecture for build. Leads and implements manufacturing plans. Conducts producibility and variation analyses to ensure that manufacturing process capability matches requirements. Assists in providing producibility information for inclusion in project plans and helps document producibility best practices. Analyzes design/build concepts to evaluate producible design/build definitions. Resolves technical problems of significant impact to performance, cost or schedule. Coordinates and implements new engineering principles, theories, advanced technologies and concepts. Validates and ensures production readiness of solutions to complex problems. Implements lean principles and technologies.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Additional Comments:
The following skills are preferred and the level is intermediate.
MES - (SAP Complex Assy Solutions), Teamcenter (Siemens PLM Software), Assy and Integration, Composite Fabrication, Metal Bond, Model Based Instructions (MBI) Authoring, Tooling & Indexing, Wire & Equipment Installation, Sheet Metal/Flat Pattern

Skill Code: 66R-Assembly and Installation
 
Job Number: 17-12923
Job Location: Ridley Park, PA
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 11/28/2017
Last Updated: 01/24/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer 3

Description:
Manufacturing Engineer 3

Location: Ridley Park, PA
Duration: 6 months

Description:
Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Additionally Mandatory Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skills:
The following skills are preferred for this assignment. The level is intermediate
MES - (SAP Complex Assy Solutions), Teamcenter (Siemens PLM Software), Model Based Instructions (MBI) Authoring, Wire & Equipment Installation, Assy and Integration and Aerospace.

Skill Code:
66T-Electrical/Electronics.
 
Job Number: 17-15711
Job Location: Ridley Park, PA
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: 9/29/17
Input Date: 09/06/2017
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III & IV - (Ridley Park)

Description:
Lead Integrated Product Teams (IPTs) in analyzing product development, complex producibility studies and production/tooling philosophies. Refines, validates, coordinates and implements conceptual designs and manages the program architecture for build. Develops manufacturing plans and oversees plan optimization. Conducts complex producibility and variation analyses to ensure that manufacturing process capability matches requirements. Resolves complex technical problems. Serves as a project manager to ensure that contract requirements, specifications, design criteria and schedule performance are integrated and maintained. Leads advanced design solutions and supports research of new product or business opportunities. Deploys company Lean Enterprise analysis methods. Documents and communicates producibility best practices. Provides guidance to others through structured mentoring.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

MES - (SAP Complex Assy Solutions), Teamcenter (Siemens PLM Software), Assy and Integration, Composite Fabrication, Metal Bond, Model Based Instructions (MBI) Authoring, Tooling & Indexing, Wire & Equipment Installation, Sheet Metal/Flat Pattern
 
Job Number: MFGEpa
Job Location: Ridley Park, PA
Rate: up to $60/hour
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 10/15/2017
Last Updated: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III - (PA) - Electrical/Electronics

Description:
Develops and implements production and tooling methodologies. Participates on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines. Develops, identifies and implements conceptual designs and maintains the program architecture for build. Leads and implements manufacturing plans. Conducts producibility and variation analyses to ensure that manufacturing process capability matches requirements. Assists in providing producibility information for inclusion in project plans and helps document producibility best practices. Analyzes design/build concepts to evaluate producible design/build definitions. Resolves technical problems of significant impact to performance, cost or schedule. Coordinates and implements new engineering principles, theories, advanced technologies and concepts. Validates and ensures production readiness of solutions to complex problems. Implements lean principles and technologies.

achelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

MES - (SAP Complex Assy Solutions), Teamcenter (Siemens PLM Software), Model Based Instructions (MBI) Authoring, Wire & Equipment Installation, Assy and Integration and Aerospace.
 
Job Number: MFGEeePA
Job Location: Ridley Park, PA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 10/15/2017
Last Updated: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner

Description:
Manufacturing Planner

Location: Ridley Park, PA
Duration: 6 Months

Description:
Plans and leads department/organization processes for developing, implementing and maintaining various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops and plans manufacturing concepts and strategies to support business objectives. Prepares build analyses and cost estimate reports. Leads integration of complex suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Participates in source selection to ensure manufacturing requirements are met. Develops complex tooling requirements based on manufacturing and engineering requirements. Manages tooling from initial design to end of use disposition. Leads investigation and resolution of complex or systemic manufacturing related issues. Leads teams performing producibility assessments of design concepts. Supports enterprise level benchmarking to incorporate best practices. Leads development of complex work statements and sequencing of events to support delivery commitments. Develops scheduling templates for use by others. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Develops and documents new job practices, techniques and standards. Works under minimal direction.

Education / Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.
Additionally... Mandatory

Additional Comments:
AA degree is mandatory
The following skills are preferred and the level is advanced.
MES - (SAP Complex Assy Solutions), Teamcenter (Siemens PLM Software), Assy and Integration, Composite Fabrication, Metal Bond, Model Based Instructions (MBI) Authoring, Tooling & Indexing, Wire & Equipment Installation, Sheet Metal/Flat Pattern
ME Nonrecurring SOW.

Skill Code:
67E-Structures
 
Job Number: 17-12922
Job Location: Ridley Park, PA
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: 9/15/17
Input Date: 09/01/2017
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner IV - (Ridley Park)

Description:
Plans and leads department/organization processes for developing, implementing and maintaining various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops and plans manufacturing concepts and strategies to support business objectives. Prepares build analyses and cost estimate reports. Leads integration of complex suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Participates in source selection to ensure manufacturing requirements are met. Develops complex tooling requirements based on manufacturing and engineering requirements. Manages tooling from initial design to end of use disposition. Leads investigation and resolution of complex or systemic manufacturing related issues. Leads teams performing producibility assessments of design concepts. Supports enterprise level benchmarking to incorporate best practices. Leads development of complex work statements and sequencing of events to support delivery commitments. Develops scheduling templates for use by others. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Develops and documents new job practices, techniques and standards.

AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

MES - (SAP Complex Assy Solutions), Teamcenter (Siemens PLM Software), Assy and Integration, Composite Fabrication, Metal Bond, Model Based Instructions (MBI) Authoring, Tooling & Indexing, Wire & Equipment Installation, Sheet Metal/Flat Pattern
 
Job Number: MFGPpa
Job Location: Ridley Park, PA
Rate: up to $45/hour
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 10/15/2017
Last Updated: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Planning Analyst IV

Description:
Location: Sacramento, CA
Rate: $35.00 - $39.00/HR
Duration: 6 month contract

**MUST be a U.S. Citizen**


Duties:
- General Production Support
- Track shelf life sensitive materials and floor stock inv to ensure production support
- Replenish inventory via electronic orders (Oracle)
- Release jobs/work orders to the production floor (via Oracle)
- Release planning (work instructions) to shop floor in conjunction with job release referenced above
- Release purchase requisitions (via Oracle) to procurement and ensure PO placement within lead time
- Perform various general transactions within ERP System (Oracle)
- Manage, analyze and execute to a material plan within ERP system (Oracle)
- Manage the supply and demand (MBOM requirements) to support program schedule
- Attend and represent material planning in program meetings
- Delegate work to individuals as required

Skills:
- Software skills:
1. Ability to learn and execute within Oracle ERP system (transactions, queries, reports, etc..)
2. Basic knowledge and execution of and within standard Microsoft office suite
- Ability to manage inventory needs to support production
- Operate in a Team Environment
- Effective communication
- Organizational skills
- Analytical skills
- Presentation skills
- Leadership
- Delegation
- APICS knowledge or certification preferable

Education:
- A Bachelor’s degree in an appropriate discipline and ten (10) years of experience in a directly related field, or an equivalent combination of education and experience.
 
Job Number: 7803
Job Location: Sacramento, CA
Rate: $35.00 - $39.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 08/22/2017
Last Updated: 10/23/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Planning Analyst IV CA

Description:
160216/7331048

Job Title: Material Planning Analyst IV
Max rate: $39/hr
Number of Positions: 1
Remaining Positions: 1

Duties: - General Production Support
- Track shelf life sensitive materials and floor stock inv to ensure production support
- Replenish inventory via electronic orders (Oracle)
- Release jobs/work orders to the production floor (via Oracle)
- Release planning (work instructions) to shop floor in conjunction with job release referenced above
- Release purchase requisitions (via Oracle) to procurement and ensure PO placement within lead time
- Perform various general transactions within ERP System (Oracle)
- Manage, analyze and execute to a material plan within ERP system (Oracle)
- Manage the supply and demand (mbom requirements) to support program schedule
- Attend and represent material planning in program meetings
- Delegate work to individuals as required
Skills: - Software skills
• Ability to learn and execute within Oracle ERP system (transactions, queries, reports, etc..)
• Basic knowledge and execution of and within standard Microsoft office suite
- Ability to manage inventory needs to support production
- Operate in a Team Environment
- Effective communication
- Organizational skills
- Analytical skills
- Presentation skills
- Leadership
- Delegation
- APICS knowledge or certification preferable
Education: A Bachelor’s degree in an appropriate discipline and ten (10) years of experience in a directly related field, or an equivalent combination of education and experience.


Skills: Required
• MATERIAL PLANNING
• MATERIAL ANALYSIS

State/Province: California
City/Town: Sacramento
Address: Hwy 50 and Aerojet Rd., 95670

Start Date: 08/28/2017
Hours Per Week: 40.00
Est. End Date: 03/09/2018
Hours Per Day: 8.00
Days Per Week: 5.00
 
Job Number: MB-7331048
Job Location: Sacramento, CA
Rate: 39/hr max
Duration: 7 month contract
Input Date: 09/29/2017
Last Updated: 10/09/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Seeking a Mechanical Design Engineer - Level 2 for an opening in Dallax, TX.

RESPONSIBILITIES:
Mechanical Design Engineer to support the Tactical Missiles Advanced Programs (TMAP) area design effort. The candidate will to work to define an operational system (OS) booster and warhead concept for a new missile system. The candidate will work with Solid Rocket Motor (SRM) suppliers to evaluate designs, perform detailed design of the Control Section Assembly, Booster Separation System, Booster to Glider Separation System, and vehicle to launcher rack interface. The engineer must be proficient in Pro-E/CREO; have good communication skills, and be able to work with internal and external customers. Tasks assigned may include generation of Interface Control Drawings (ICD), generation of Instructional Engineering Release (IER), creation of solid models and drawings, and performing tolerance analyses. Tasks will include conceptual and detail design of missile integration concept components, systems, and subsystems, and creation of 3D solid models and 2D drawings. Effort will require coordination of design(s) with other mechanical / electrical disciplines, and familiarity with missile to aircraft integration concepts.

REQUIRED EXPERIENCE:
Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, knowledge of Geometric Dimensioning and Tolerancing, and experience with manufacturing engineering and fabrication processes.

PREFERRED EXPERIENCE:
Familiarity with Microsoft Office applications is desired.

EDUCATION:
Candidate should have a Bachelors of Science degree in Mechanical Engineering, or 10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer / CREO 3.

WORK HOURS:
9/80, 1st Shift, Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 164789
Job Location: Dallas, TX
Duration: 11 Months
Start Date: ASAP
Input Date: 08/31/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

Mechanical Engineer

Description:

PDS Tech, Inc. is seeking a Mechanical Engineer for a position located in Kansas City, MO. 
Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

The Client's organization has several open opportunities for Mechanical Engineers.  We are seeking engineers who are interested in supporting one or more of the following areas:  product engineering, process engineering, purchased product engineering, systems engineering and mechanical testing.  Job title will be commiserate with level of experience. 

 
  • Completes assignments and provides detailed instructions in the design and/or project management of new and current projects, products, programs, components, tools and acceptance equipment under technical guidance of higher level engineers or departmental management
  • Participates in establishing operating procedures on new products and components
  • Assists in the development of test procedures and performance of routine to moderately complex engineering evaluation tests, product and process capability studies, quality audits, product or project data reviews, and other engineering evaluation work
  • Evaluates opportunities for defect prevention based on standard or accepted solutions
  • Prepares evaluation reports, analyzes discrepancies, and makes recommendations for product, test equipment, procedures and manufacturing or operating processes that improve productivity and quality and reduce flowtime
  • Assists in the preparation of product or project definitions, manufacturing drawings and specifications, and test equipment designs
  • Defines and acquires tooling, gaging and other equipment necessary to manufacture parts and to assure product quality
  • Interacts with design agencies, suppliers and/or internal organizations such as the Integrated Supply Chain to assist in resolving design, development, production and acceptance issues
  • Provides technical assistance in appropriate assigned field
  • Evaluates and makes recommendations regarding technological advances that improve productivity and quality,reduce flowtime, and enhance operational surety
  • May perform other duties as required
  • Conducts activities in a safe and healthy manner and works in accordance with established ES&H requirements to ensure the protection of associates, the public, and the environment. Takes actions necessary to stop work when an unsafe condition or action is identified. Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

Basic Qualifications: 
  • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
  • Bachelor of Science degree in Mechanical Engineering from an ABET accredited program or an equivalent ABET accredited engineering degree.
  • Minimum three (3) years of professional technical experience.
  • Proficiency in Microsoft Excel, Word and PowerPoint required

Additional Qualifications: 

  • Hands-on experience with 3D design software like Creo or SolidWorks
  • Effective verbal, written and presentation skills
  • Knowledge of continuous improvement methodologies including Six Sigma
  • Previous experience in a manufacturing environment
  • Experience in engineering related administrative activities such as configuration management, financial reporting, product testing procedures & data entry preferred
  • Proven ability in decision making and organization, planning and problem solving skills
  • Ability to work under minimal supervision, with latitude for independent action and decision making.
  • Good people skills, ability to motivate teams to produce on-target and timely results.
  • Demonstrate project/program management via multiple priorities/projects
  • Ability to plan and organize, demonstrate excellent time management and support several projects at once
  • Willingness to travel on occasion

 
Job Number: 1710068729
Job Location: KS City, MO
Duration: 6 months
Input Date: 05/26/2017
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tanya James
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002JrH0AAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Test Engineer

Description:
This assignment specifically requires US Citizenship**

Mechanical Test Engineer:

Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department.

Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.

Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met. Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns. Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators.

Applicant must have the capability of working independently and be self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

This is a 'safety-sensitive' position as prescribed by NASA. Special drug testing/training needed, and inclusion in the random drug/alcohol program required.

Education: Bachelor's Degree
 
Job Number: CT 38958
Job Location: Hartford, CT
Per Diem: possible
Overtime: possible
Duration: 12 mos.
Start Date: asap
Input Date: 09/13/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Carolyn
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6336
800 Phone: 866/277-3343
Fax Phone: 860/623-8228
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Model Based Systems Engineering (MBSE) Technical Specialist URGENT CA

Description:
160120/7326500
Canoga Park, CA
70/hr max
6 months

Model Based Systems Engineering (MBSE) Technical Specialist

Remaining Positions: 1

Duties: ** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

-The successful candidate will have experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
-Knowledge of Jazz Team Server (JTS) enterprise management is useful.
-An intermediate level of practice as a SysML Model User and Builder is desired.
-Understanding of how these applications are deployed and used in the aerospace industry is preferred.
-Rocket engine or propulsion system domain knowledge is desirable.
-The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.
Skills: Required:
-Experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
-An intermediate level of practice as a SysML Model User and Builder is desired.
-The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.

Desired:
-Knowledge of Jazz Team Server (JTS) enterprise management is useful.
-Understanding of how these applications are deployed and used in the aerospace industry is preferred.
-Rocket engine or propulsion system domain knowledge is desirable.
Education: -BS or MS in Engineering, Computer Science or related field is required.

-MS in Systems Engineering is desirable.



Skills: Required
• MBSE
• IBM RATIONAL SOFTWARE
• DOORS SOFTWARE

State/Province: California
City/Town: Canoga Park

Start Date: 09/04/2017 Hours Per Week: 40.00
Est. End Date: 03/04/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7326500
Job Location: Canoga Park, CA
Rate: 70/hr max
Duration: 6 month contract
Input Date: 10/11/2017
Last Updated: 11/29/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Embedded Software Engineer

Description:
Principal Embedded Software Engineer (C/C++)
6 month contract
Cedar Rapids, IA

Description:

The candidate will be a participant in the full software development life cycle on a software development team with the responsibility of developing embedded software from design through software unit test. The candidate will interpret software requirements and translate these artifacts into well formed software design. The candidate will lead and mentor software team members creating the software design utilizing both written descriptions and Unified Modeling Language diagrams. The candidate will be expected to make design trade-offs, defend design decisions, and ensure the production of high quality code within budget and schedule. The candidate will ensure fulfillment of requirements via adherence to a well defined software process and by following stringent coding standards.

Qualifications:
• Bachelor's degree in a Science, Technology, Engineering or Math (STEM) discipline
• US CITIZEN
• Embedded systems C/C++ software development experience (8+ years)
• TCP/IP network applications development experience (8+ years)
• Linux OR with Green Hills Integrity development experience (8+ years)
• Experience following a well defined software development process (8+ years)
• Strong written and verbal communications skills and the ability to work well with others in a professional team environment
• Strong organizational skills and the ability to manage multiple tasks while balancing priorities and schedules
• Motivated self-starter with strong analytical skills
• Configuration management tools and processes experience


Desired requirements:
• UML experience (2+ years)
• Enterprise Architect experience (1+ years)
• FACE (Future Airborne Capability Environment) experience
• Experience in developing products for military applications meeting government security or safety standards
• Bid and proposal experience
• OOA/D architectures and design patterns experience
• Multi-threaded real-time embedded applications experience
• Experience investigating problems to the root cause and then championing the creation and implementation of corrective actions
• Background and/or knowledge of range test and training systems
• Knowledge and cognizance of Live Virtual Constructive concepts
• Agile development methodology experience
 
Job Number: 52226
Job Location: Cedar Rapids, IA
Rate: DOE
Per Diem: Yes
Overtime: Possible
Duration: 6 months
Start Date: 9/5/17
Input Date: 08/25/2017
Last Updated: 09/11/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Engineer - 6897131

Description:
The candidate will be involved with full-lifecycle software engineering and development of Specialized Test Equipment (STE) software for various RF systems and sensors. This includes planning, requirements development, design, CUT, integration, and testing of application-level and embedded STE software.

Required Skills: • 8+ years of technical experience in software engineering development. • Experience with Real-time operating systems such as VxWorks and/or INTEGRITY • Experience with low-level embedded device drivers and/or board support packages (BSP) • Strong ability to debug software and troubleshoot hardware issues. • Strong C/C++ experience. • Experience with one or more scripting languages; such as Python or Perl. • Experience with NI LabWindows CVI and/or NI TestStand. • Experience with Matlab. • Experience with GPIB, VISA, SCPI, 1553, VME, and/or VXI. • Experience with test equipment such as DMM, network analyzer, signal generator, power supply, power meter, spectrum analyzer, etc. • Ability to communicate and work effectively in a team environment. • Ability to operate with limited supervision, with extensive latitude for independent judgment. • Experience with Software Development Lifecycle methodologies such as Waterfall and Agile. Desired Skills: • Understanding of RF communication concepts and IQ data processing. • Ability to read timing diagrams • Ability to read schematics • Experience with GUI programming. • Experience with ATEasy. • Experience in ClearCase, ClearQuest, DOORS. • Familiarity with Coverity. • Experience or desire to lead a small team of 1-4 engineers. Required Education: • BS/BA in Computer Engineering, Electrical Engineering, Computer Science, or equivalent degree
 
Job Number: 6897131
Job Location: El Segundo, CA
Rate: OPEN
Duration: 12 Month CTH
Input Date: 08/28/2017
Last Updated: 10/03/2017
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Systems Engineer

Description:
Principal systems engineer supporting design, development, test, and verification of projects supporting Surveillance and Targeting Systems (STS) programs. The successful candidate will serve as a systems engineer on an integrated product team (IPT) for the Space and Airborne Systems (SAS) business unit. The position consists of engineering development on a large, complex, airborne Electro Optic (EO) system. Specific duties include:
• Hands on requirements analysis, definition, and derivation to ensure EOIR system will meet all customer requirements
• Integrating system parameters and design solutions, and conducting functional and performance analysis
• Interacting with engineers from other disciplines, such as Software and Electrical Engineering, to obtain pertinent information required to accomplish tasks
• Developing design verification and system qualification test requirements, plans, and procedures.
• Providing systems engineering support to hardware and software design teams, and to production personnel.
• Assisting with system integration and troubleshooting.

*Required Skills:

• 8+ years of engineering development, integration, test, and qualification experience on airborne electro-optical & infrared (EO/IR) systems.
• Proven written and oral communication skills
• Must be able to interface with design engineers, customers, and end users
• Must be willing to travel for business as needed
• Prior experience developing proposals, bids, and white papers

Desired Skills:

• Broad EO/IR engineering skill base, from among: electrical, systems, software, mechanical, and reliability engineering
• Experience as a Product Owner on an Agile development program
• Experience with production and sustainment of airborne EO/IR systems
• Experience with Technical Supplier Management
• Prior experience as Technical Volume Lead or Proposal Lead on a competitive pursuit
• Strong Risk Assessment & Opportunity skills related to the identification, management, and mitigation of technical risk
 
Job Number: 7225612
Job Location: McKinney, TX
Rate: DOE
Duration: 9 Months
Input Date: 09/19/2017
Last Updated: 09/19/2017
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Procurement Engineer - Level 3

Description:
Procurement Engineer - Level 3

Location: Tampa, FL
Pay Rate: DOE ($25/hr - $45/hr)
Duration: 6 month contract
Shift: First, 5/40
Travel: Yes; Lackland AFB San Antonio, TX
***MUST have an ACTIVE SECRET CLEARANCE***

Description
-Coordinates with Subcontract Management Team, Procurement Engineering Management, Systems Engineering, the Suppliers (CAE USA) and Industry experts to facilitate the design, production, test and qualification of aerospace and defense products.
-Analyzes technical data, designs, preliminary specifications, manufacturing limitations, supplier facilities, and parts/equipment availability.
-Investigates and recommends potential suppliers based on assessments of response to specifications, costs, inspection of facilities, and historical performance.
-Facilitate technical trade-offs and standardization that may lead to more economical procurement.
-Recommends design changes or process improvement to mitigate production issues.
-Leads teams of Supplier and internal staff in collaboratively solving problems in Producibility, Quality, Inspection, Cost, Mistake-Proofing, Test, Reliability and Affordability while based in supplier facility and customer site.
-Provides technical solutions to a wide range of difficult problems.
-Solutions are imaginative, thorough, and practicable, and consistent with organization objectives.
-Works under general direction only and independently determines and develops approach to solutions.
-Work is reviewed upon completion for adequacy in meeting objectives.
-Reports directly to the Lead Procurement Engineer on the C-5 program.
-Provides surveillance and Quality Assurance direction to supplier while supporting the program needs.
-Experience with requirements management and flowdown to supplier.
-Reviews and approves Supplier Statements of Work (SSOW), technical specification, and supplier deliverables (SDRLs).
-Onsite Quality Assurance representative on program assuring data trend analysis, lean practices, process improvement, operating procedure compliance, quality control, supplier surveillance, containment activity, supporting TKOs/RBATs/PACs, continuous improvement, configuration management, and root cause analysis following AS9100, ISO9001, ASQ, and CMMI.

Skill/Experience/Education (MANDATORY):

-Quality Assurance (4-5+ years experience)
-Supplier Quality Assurance (4-5+ years experience)
-Hardware Engineering (4-5+ years experience)
-Test Verification/Validation (4-5+ years experience)
-Configuration Management (4-5+ years experience)
-ISO 9001: 2008 training (required)
-AS9100C training (required)
-Lockheed Martin Procure 2 Pay (P2P) training (required)
-Auditor training (required)
-Engineering or Technical 4-year Degree
-Process Improvement
-Purchase Orders
-Physical and Software Configuration Audits
-Source Inspections
-QMS
-Risk Assessment
-ASQ
-Corrective Action and Prevention
-Reliability
-Logistics
-Excel


Desired:
-Subcontracts Management (0-3+ years experience)
-Systems Engineering [aircraft avionics systems] (0-3+ years experience)
-Green Belt/Black Belt Certification
 
Job Number: 7345
Job Location: Tampa, FL
Rate: 25-45
Per Diem: Split Possible
Overtime: Yes
Duration: 6 mos
Start Date: ASAP
Input Date: 04/19/2017
Last Updated: 11/14/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Planning & Scheduling Analyst I

Description:
Program Planning & Scheduling Analyst I
Savannah, GA
Long Term Contract
$30.00/Hr

Unique Skills:
Experienced with Aircraft Maintenance Scheduling: Scheduled Maintenance, Modification Period Scheduling, Flying Schedule, Flying Schedule effectiveness and Time Change component scheduling.

Education and Experience Requirements:
Bachelors Degree in Industrial Engineering, Business Administration, or related curriculum, or an equivalent combination of education and experience to successfully perform the essential functions of the job. Two (2) years formal scheduling experience. Requires proven experience with PC based software such as MS Excel, Project, Access, Word and Power Point. Experience with resource loaded plans desired.

Position Purpose:
Under general supervision gathers given information, organizes and produces schedules, program plans, financial and resource plans, and other duties needed to support assigned programs. Responsible for supporting the team with resource loaded plans and forecast analysis as required.

Principal Duties and Responsibilities:

Essential Functions: 1. Produce resource loaded schedules and/or financial operations of assigned programs with gathered activities, hours, and budget. 2. Produce recovery plans as requested using given information. 3. Utilize tools provided for collecting and maintaining program analysis and detail level data. 4. Prepare status reports and forecasts for assigned programs. 5. Responsible for preparing and maintaining schedules at all levels in support of assigned projects/programs.

Additional Functions: 1. Perform other duties as assigned.
Languages Required (in addition to English): English
 
Job Number: 7074
Job Location: Savannah, GA
Rate: 30.00
Per Diem: $110/Weekly, Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/16/2017
Last Updated: 10/23/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer Composites (active secret clearance)

Description:
Quality Engineer- Composites

Secret Clearance Required: active with 5 year refresh/update
Location: St Louis, MO
Duration: Long term contract
Rate: up to $70/hr


Job Purpose
This position will provide day-to-day focus on the proper execution of actions necessary for the on-time delivery and first time quality of products and services. To provide technical and administrative leadership to ensure that performance and quality of products conform to established company, international and governmental regulatory standards, agency guidelines, and customer requirements by implementing and maintaining quality assurance policies, processes, procedures and controls.
Principal Accountabilities
• Product Quality
• Ensure that Quality Plans are current, and being executed for the programs assigned
• Ensure that Quality Plans and supporting documentation such as Inspection Points, Statistical Process Control Plans, etc are in place and being used to measure and monitor key process/product characteristics and interfaces
• Ensure that issues affecting product quality have effective corrective actions/micro plans in place that will result in resolution or risk mitigation plans are in place that will minimize product quality impact
• Monitor the fidelity of associated inspection procedures to customer requirements and program specific quality plans
• Ensure that plans/processes are in place and executed to minimize or eliminate product escapes
• Ensure that corrective actions have data and data analysis to effectively identify root cause, containment, interim and long term corrective action planning and decisions, as well as quantifiable verification and monitoring exit criteria
• Analyze and provide material review dispositions for non-conforming materials, parts, and equipment.
• Program Quality
• Serve as point of contact with the Quality Manager for program progress and monitoring.
• Support efforts to ensure overall customer satisfaction relative to current project or product and prospective follow-on business.
• Participate in the creation of operational/program plans and/or procedures and coordinate with customer and supplier representatives to ensure satisfactory quality system performance.
• Participate in the administration of program and project activities and processes.
• Identify necessary quality resources to achieve organizational goals and objectives.
• Perform and lead specialized quality functions as contract evaluation and planning; data preparation, analyzes and reporting; development of quality tools, techniques and methods; process improvements; maintenance of accountability and configuration of deliverable products and records; special investigations and audits: material review support; preventive and corrective actions; customer interface, liaison and support; product delivery; and audit of manufacturing and test data for quality system requirements.
• Quality and Mission Success
• Resolve issues at department/program level.
• Test and recommend products, processes, software, equipment and measurement systems.
• Provide technical expertise to company employees, suppliers, customers and regulatory agencies to ensure compliance with contractual, company, and regulatory requirements.
• Facilitate problem solving activities and events
• Provide education and coaching on the company’s quality system to program and process team mates.
• Make recommendations that affect quality, products, processes and costs.

Qualifications
DOD Secret Clearance is required with an investigation within the past 5 years.

Education
• Bachelor’s Degree in Engineering or related discipline required. Combination of education and relevant experience may be considered in lieu of degree.

Experience and Qualifications
• Five years of experience in quality required.
• Will have a fundamental understanding of quality philosophies, principles, systems, methods, tools, standards, organizational and team dynamics, customer expectations and satisfaction, supplier relations and performance, leadership, training, interpersonal relationships, improvement systems and professional ethics.
• Will have a fundamental understanding of a quality system and its development, documentation and implementation to domestic and international standards or requirements.
• Will have a basic understanding of the audit process including types of audits, planning, preparation, execution, reporting results and follow-up.
• Will be able to develop and implement quality programs, including tracking, analyzing, reporting and problem solving.
• Will be able to plan, control and assure product and process quality in accordance with quality principles, which include planning processes, material control, acceptance sampling and measurement systems.
• Will have basic knowledge of reliability, maintainability, and risk management, including key terms and definitions, modeling, systems design, assessment tools and reporting.
• Will have a thorough understanding of problem-solving and quality improvement tools and techniques. This includes knowledge of management and planning tools, quality tools, preventive and corrective actions, and how to overcome barriers to quality improvements.
• Will be able to acquire and analyze data using appropriate standard quantitative methods across a spectrum of business environments to facilitate process analysis and improvements.
• Superb written, communication interpersonal and leadership skills.

• Computer literate in Excel, Word, Access, Project and PowerPoint.

The Structures Company LLC is an AA/EOE.
 
Job Location: St. Louis, MO
Rate: up to $70/hr
Per Diem: yes
Overtime: possible
Duration: 12+ month
Start Date: asap
Input Date: 09/13/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer II

Description:
Required CATIA V5 AND SMARTEAM, SOLUMINA I and 2, Microsoft Office Word (Excel and PowerPoint strongly preferred). Experience with RCCA and Quality Escape Investigations

Education and Experience Requirements:
Bachelors degree in a related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.4 years related technical exp in a manufacturing environment or repair and overhaul working with quality management systems with continually increasing responsibility. 3 years exp specific to the appropriate Quality department work to be performed.

Position Purpose:
Working under general supervision, in a team oriented environment, perform all tasks in area of responsibility in a timely and efficient manner to support the inspection/quality system ensuring all aspects of the delivered/finished article is manufactured in accordance with approved quality system requirements and is certified as compliant to type design requirements or compliant with in service limitations for Repair Station activities.

Essential Functions:
1. Manage the compliance of the quality activities of suppliers or facilities through the application of system, product and process audits to the requirements of the FAA approved data.
2. Certify a supplier or assess a facility quality system, personnel, processes and equipment as required to the applicable quality standards.
3. Perform surveillance, source inspections, and first article inspections at supplier facilities, foreign or domestic and/or monitor the inspection system performance throughout all Operations, Materials and Repair Stations.
4. Coordinate quality assurance program plans, monitor and modify audit schedules, evaluate acceptance test programs, and quality engineering requirements of suppliers or facilities and review to ensure program effectiveness and integrity.
5. Witness and validate acceptance, qualification, interchangeability, configuration and compatibility tests.
6. Provide liaison support regarding supplier or facility performance to established requirements.
7. Coordinate documentation support for FAA Compliance.
Additional Functions:
1. Conduct product, system or process failure investigations, and provide technical assistance in resolution of quality problems.
2. Verify required corrective action implementation for timeliness and effectiveness.
3. Perform trend analysis of audit results to identify quality system deficiencies.
4. Work with other departments as needed to meet quality compliance of parts and processes.
5. Perform other duties as assigned.
Other Requirements:
1. Previous Quality experience relative/complying with Regulatory Standards.
2. Understands and is able to apply and communicate to others: blueprints/specifications; Federal Aviation Regulations; Quality Control System Requirements; knowledge of manufacturing/fabrication techniques and processes
3. Computer literate; capable of working within the various software applications utilized throughout the corporation.
4. ASQ Certification as Quality Engineer or Quality Auditor preferred.
5. A&P license preferred.
 
Job Number: 24-192
Job Location: Savannah, GA
Rate: $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 10/30/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Test Engineer

Description:
Active Secret Clearance Required

Position Description:
Test Engineer to support software change requests on production
Test software which testes the functionality of deliverable hardware.
Test functionality includes Digital I/O and RF (up to 20GHz) test and measurements.
Must have the ability to follow an Engineering process and report progress back to management.

Skills Required:
Proficient with VEEPro also known as Agilent VEE.
Test software management system CLEARCASE.
Ability to interface with Operations management, Hardware and Systems Engineering in the implementation of test specification changes and certification of the software to the Operations factory.
Ability to be self-direct and report status of project in a clear and concise manner.

Skills Preferred:
Proficient in VEEPro also known as Agilent VEE
Must be familiar with Vector Network Analyzers and performing RF test and measurement with the instrument.

Experience Required:
Minimum of 5 years practical experience developing test software using VEEPro which covers Digital , Analog, and RF Signals (up to 20GHz)

Experience Preferred:
Experience with VeePro or Agilent VEE.

Education Required:
Minimum BSEE degree.
 
Job Number: NH38812
Job Location: Nashua, NH
Rate: 75.00
Per Diem: Possible
Overtime: Possible
Duration: 9 months
Input Date: 09/06/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Receptionist / Administrative Assistant

Description:
From Hiring Manager:

<> Normal hours are 8:00 – 5:00 but must be flexible (may start at 7:30 one day a week for morning meetings)
<> Will work in main entrance (central reception), acting as the face of the company; being a Secured Facility, there MUST be someone at this desk at all times during business hours.
<> Need to have great communication skills as they will be dealing with both internal and external persons
<> Prior front desk / receptionist role experience strongly preferred
<> Strong MS office skills, particularly Excel and Office
<> They will be handling interview scheduling and event planning, so strong organization skills as well
<> Reliable transportation is a must (may accompany clients, guests or others offsite as requested)

Summary:

The Receptionist / Administrative Assistant will work at the main entrance and will be the first person people see when entering the building. It is important that someone is physically at the front desk at all times, as this is a secured facility. In addition to the general duties listed below, the Administrative Executive Assistant will be asked to check / process employee and guest badges while acting as an extension of security.

The administrative day-to-day activities including, but not limited to:
 Answers, screens, and directs incoming telephone calls.
 Responds to routine and non-routine inquiries as appropriate.
 Schedules appointments, makes travel plans, arranges meetings, and prepares required materials. May attend meetings and record and report on proceedings if necessary.
 Provide support to department members as requested, and handling office issues as required. This also includes ordering supplies as requested or needed.
 Prepare and maintain work processing, spreadsheets, data bases, and/or other software files and information.
 Organizes and maintains departmental files. Opens, reviews and distributes incoming mail. Prepares and ships outgoing mail.
 Perform all other position related duties as assigned or requested.

Experience / Skills:

 5+ years’ experience of related work experience preferably in a government/military environment
 HS Diploma; prefer Associate’s / Bachelor’s degree in Human Resources or a related field
 Must have a reliable vehicle for transportation
 Strong MS Word, Excel and general internet skills
 Strong attention to detail; excellent data entry and organizational skills; strong written and verbal communication skills and ability to work independently with minimum supervision
 Experience working at a secured facility (badging and security experience)
 Office Management is a plus


Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
 
Job Number: AdminAssist
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes
Duration: Long-Term
Start Date: ASAP
Input Date: 09/01/2017
Last Updated: 09/14/2017
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
Reliability Engineer

Principle Duties and Responsibilities
·Perform detailed analysis and assessment of mechanical and electromechanical designs to identify and document reliability, maintainability and safety considerations.
· Develop reliability program plans, perform reliability analysis, apportion failure rates, generate reliability predictions and reports, analyze production and field data to identify reliability improvement opportunities.
·Utilize the company Failure Reporting, Analysis and Corrective Action System (FRACAS).
·Conduct and document Failure Modes Effects and Criticality Analysis (FMECA/FMEA) and Fault Tree Analysis.
·Support and/or lead Root Cause and Root Cause Failure Analysis.
·Perform systems and subsystems safety hazard analysis, assign hazard rating, develop mitigation strategies, actively track and manage hazards to acceptable risk levels.
·Perform maintainability analysis, identify preventative maintenance activities and cycle times, ensure customer maintenance requirements are met and support customer maintenance demonstrations.
·Generate proposals, RM&S estimates and support Total Cost of Ownership or Life Cycle Cost predictions.
·Participate in Integrated Product Teams for collaborative design and project execution coordination.
·Implement Reliability Growth program to include recommendations and support for Highly Accelerated Life Tests (HALT), Highly Accelerated Stress Screening (HASS), Test Analyze and Fix (TAAF), reliability risk reduction, Environmental Stress Screening (ESS), acceptance testing and qualification testing.
·Make independent judgments regarding technical issues and recommendation to improve company processes.
Required Qualifications:
· Bachelor of Science in Engineering or Engineering Technology discipline.
·8+ years experience as an RM&S engineer or equivalent role.
·Expert in performing reliability, maintainability and safety analysis for defense and commercial aerospace systems.
·Expert in utilizing 217Plus and generating MTBF, MTTR, Failure Rates and Availability predictions.
·Experienced using PTC/Relex Reliability Prediction software.
·Strong technical writing, report preparation and communication skills.

Desired Qualifications:
·Certified Reliability Professional (CRP) or Certified Reliability Engineer (CRE).
· Strong statistical analysis and pragmatic problem solving skills.
· Experience with DO178B, DO254 and 14 CFR Part 25.
· Familiar with Design For Six Sigma (DFSS) and/or Six Sigma methodologies.
 
Job Location: Davenport, IA
Rate: Open
Per Diem: Yes
Overtime: Some
Duration: 6-12
Start Date: ASAP
Input Date: 09/13/2017
Firm Name: AMERICAN CONTRACT GROUP
Attention: Derek Doucette
Address: 50 HIGH ST STE 46
City, State: NORTH ANDOVER, MA 01845
Phone: 978/984-5581
800 Phone: 877/723-9087
Fax Phone: 978/208-8246
Website: www.americancontractgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
Experience conducting Reliability efforts and testing and verification to include experience with performing reliability predictions, and Failure Mode, Effects, and Criticality Analysis (FMECA) - Experience with Windchill Quality Solutions Reliability software tool or equivalent tool - Experience with reliability Failure Reporting, Analysis, and Corrective Action System (FRACAS) - Maintainability and Testability/Built-In-Test (BIT) engineering experience to include BIT Architecture definition and BIT analysis - Strong interpersonal skills and an ability to build effective working relationships - Strong oral and written communication skills, technical writing experience, and an ability to communicate findings to customers and management
 
Job Number: 40635
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 09/07/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer - Level 2

Description:
Reliability Engineer - Level 2

Location: Orlando, FL
Pay Rate: DOE ($40/hr - $60/hr)
Duration: 1 year contract
Shift: First, 9/80, exempt OT
**MUST have an ACTIVE SECRET CLEARANCE**

Description
-Built-In-Test (BIT) Engineer to execute BIT program on DoD System, to include BIT allocations, predictions, modeling, and Failure Modes, Effects and Criticality Analysis (FMECA).
-The engineer will monitor suppliers in the development and implementation of BIT architecture, requirements and implementation.
-Conduct analysis and review of data from system and supplier test events and failures to identify issues and mature the BIT system through corrective action.
-Prepare and present at design and program reviews.
-Develop BIT DRSs and support hardware design activities.
-Support SW Engineers in the implementation of BIT requirements in SRS's.
-Generate and maintain BIT maturity metrics.
-Perform Reliability and BIT testing as necessary.
-Provide Reliability support as required.

Skill/Experience/Education (Mandatory):
- Active Secret security clearance
- Experience conducting Reliability efforts and testing and verification to include experience with performing reliability predictions, and Failure Mode, Effects, and Criticality Analysis (FMECA)
- Experience with Windchill Quality Solutions Reliability software tool or equivalent tool
- Experience with reliability Failure Reporting, Analysis, and Corrective Action System (FRACAS)
- Maintainability and Testability/Built-In-Test (BIT) engineering experience to include BIT Architecture definition and BIT analysis
- Strong interpersonal skills and an ability to build effective working relationships
- Strong oral and written communication skills, technical writing experience, and an ability to communicate findings to customers and management

Desired:
- Electrical Engineering degree.
- Strong electrical background with a good mechanical understanding.
- Diagnostic algorithm development – diagnostic tests/procedures to perform fault detection and fault isolation.
- Software skills – Ability to read code and design requirements for software engineers to write BIT tests.
- Ability to teach others BIT / testability.
- Practical hands on experience with hardware test and troubleshooting.
- Familiarity and ability to model systems with US Army Materiel Systems Analysis Activity (AMSAA) Reliability Growth Planning Models (PM2-Continuous and PM2-Discrete), Reliability Growth Tracking Model (RGTM-C), Reliability Growth Projection Models (ACPM, AMPM, and ADPM), and Reliability Test Planning Tools (IPT-C and IPT-D)
 
Job Number: 7873
Job Location: Orlando, FL
Rate: 40-60
Per Diem: Split Possible
Overtime: Yes, exempt
Duration: 1 year
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer - Level 2 with active secret FL

Description:
160275
Requirement #MFC-REQ-1488
Work Location Orlando, FL
Work Week 9/80-A
Priority High
Needed Date 10/02/2017
End Date 10/01/2018
Number of Resources 1
Security Clearance Secret


Title: Reliability Engineer - Level 2

Description
Built-In-Test (BIT) Engineer to execute BIT program on DoD System, to include BIT allocations, predictions, modeling, and Failure Modes, Effects and Criticality Analysis (FMECA). The engineer will monitor suppliers in the development and implementation of BIT architecture, requirements and implementation. Conduct analysis and review of data from system and supplier test events and failures to identify issues and mature the BIT system through corrective action. Prepare and present at design and program reviews. Develop BIT DRSs and support hardware design activities. Support SW Engineers in the implementation of BIT requirements in SRS's. Generate and maintain BIT maturity metrics. Perform Reliability and BIT testing as necessary. Provide Reliability support as required.
Skill/Experience/Education
Mandatory:

- Active Secret security clearance - Experience conducting Reliability efforts and testing and verification to include experience with performing reliability predictions, and Failure Mode, Effects, and Criticality Analysis (FMECA) - Experience with Windchill Quality Solutions Reliability software tool or equivalent tool - Experience with reliability Failure Reporting, Analysis, and Corrective Action System (FRACAS) - Maintainability and Testability/Built-In-Test (BIT) engineering experience to include BIT Architecture definition and BIT analysis - Strong interpersonal skills and an ability to build effective working relationships - Strong oral and written communication skills, technical writing experience, and an ability to communicate findings to customers and management
Desired:

- Electrical Engineering degree. - Strong electrical background with a good mechanical understanding. - Diagnostic algorithm development – diagnostic tests/procedures to perform fault detection and fault isolation. - Software skills – Ability to read code and design requirements for software engineers to write BIT tests. - Ability to teach others BIT / testability. - Practical hands on experience with hardware test and troubleshooting. - Familiarity and ability to model systems with US Army Materiel Systems Analysis Activity (AMSAA) Reliability Growth Planning Models (PM2-Continuous and PM2-Discrete), Reliability Growth Tracking Model (RGTM-C), Reliability Growth Projection Models (ACPM, AMPM, and ADPM), and Reliability Test Planning Tools (IPT-C and IPT-D)


Interview Required Yes
Max Pay Rate 60.00 USD

Shift1st Shift
OT Allowed Yes (OT Limitation: No)
Travel No
Exempt
 
Job Number: JE-1488
Job Location: Orlando, FL
Rate: 60//hr max
Duration: 12 month contract
Input Date: 10/12/2017
Last Updated: 10/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer - Level 3

Description:
Reliability Engineer - Level 3

Location: Orlando, FL
Pay Rate: DOE ($40/hr - $60/hr)
Duration: 6 month contract
Shift: First, 9/80, OT exempt
**MUST have an ACTIVE SECRET CLEARANCE**

Description
-Develops, coordinates and conducts technical reliability studies and evaluations of engineering design concepts and design of experiments (doe) constructs.
-Recommends design or test methods and statistical process control procedures for achieving required levels of product reliability.
-Compiles and analyzes performance reports and process control statistics; investigates and analyzes relevant variables potentially affecting product and processes.
-Ensures that corrective measures meet acceptable reliability standards.
-Analyzes preliminary plans and develops reliability engineering programs to achieve company, customer and governmental agency reliability objectives.
-May develop mathematical models to identify units, batches or processes posing excessive failure risks.
-As necessary, proposes changes in design or formulation to improve system and/or process reliability.
-May determine units and/or batches requiring environmental testing, and specifies minimum number of samples to obtain statistically valid data.
-Lead execution of reliability, maintainability, testability, and system safety activities.
-Lead and execute reliability tasks including FRACAS, failure review boards/corrective actions, development tasks such as predictions, FMECAs, BIT development and effectively analysis, HALT, and BIT demonstrations.
-Provide status on activities as part of Program reviews and Supplier CABs.
-Will provide Reliability Engineering support to the JAGM Program area
•Develop reliability predictions using Relex and/or approved prediction methodologies for mechanical and electrical designs.
•Perform Failure Mode and Effects, and Criticality Analysis (FMECA). •Implement Built-In-Test (BIT) for new designs including Development and Validation of improvements to existing BIT through lab testing and/or BIT demonstrations
•Develop reliability program growth plans, and conduct of reliability growth analysis.
•Support of design reviews and test activities as required.
•Lead Reliability testing such as Highly Accelerated Life Testing (HALT), Aging and Reliability Qualification Test (RQT).
•Participate in Corrective Action Boards (CAB) and Failure Review Boards (FRB).
•Identify Failure Review and Corrective Action System (FRACAS) trends to identify and prioritize failure modes to investigate for corrective actions.
•Review Engineering Change Proposals (ECP), support Concept Screening Board (CSB) and Configuration Control Board (CCB).

Skill/Experience/Education (Mandatory):
•Experience performing BIT analysis.
•Experience performing reliability predictions.
•Experience with reliability FRACAS and data mining.
•Experience with the FMECA process.
•Possess excellent written and oral communication skills, with experience developing and delivering presentations to peers as well as management.
•Proficient with Microsoft Office products.
•Experience with Windchill software tool.
•Must have at least an Interim Secret security clearance prior to start.

Desired:
•Strong electrical background with a good mechanical understanding.
•Practical hands on experience with hardware test and troubleshooting.
•Analytical thinker with a demonstrated ability of solving complex problems which require ingenuity and innovation.
•Candidate should be a self-starter capable of performing assigned tasks with little direction.
• Final Secret security clearance.
 
Job Number: 7875
Job Location: Orlando, FL
Rate: DOE
Per Diem: Split Possible
Overtime: Yes, exempt
Duration: 6 mos
Start Date: ASAP
Input Date: 09/29/2017
Last Updated: 12/20/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer - Level 3 with active secret FL

Description:
Requirement #MFC-REQ-1343
Work Location Orlando, FL
Work Week 9/80-A
Priority High
Needed Date 10/02/2017
End Date 04/02/2018
Number of Resources 1
Security Clearance Secret

Title: Reliability Engineer - Level 3

Description
Develops, coordinates and conducts technical reliability studies and evaluations of engineering design concepts and design of experiments (doe) constructs. Recommends design or test methods and statistical process control procedures for achieving required levels of product reliability. Compiles and analyzes performance reports and process control statistics; investigates and analyzes relevant variables potentially affecting product and processes. Ensures that corrective measures meet acceptable reliability standards. Analyzes preliminary plans and develops reliability engineering programs to achieve company, customer and governmental agency reliability objectives. May develop mathematical models to identify units, batches or processes posing excessive failure risks. As necessary, proposes changes in design or formulation to improve system and/or process reliability. May determine units and/or batches requiring environmental testing, and specifies minimum number of samples to obtain statistically valid data. Lead execution of reliability, maintainability, testability, and system safety activities. Lead and execute reliability tasks including FRACAS, failure review boards/corrective actions, development tasks such as predictions, FMECAs, BIT development and effectively analysis, HALT, and BIT demonstrations. Provide status on activities as part of Program reviews and Supplier CABs. Will provide Reliability Engineering support to the JAGM Program area •Develop reliability predictions using Relex and/or approved prediction methodologies for mechanical and electrical designs. •Perform Failure Mode and Effects, and Criticality Analysis (FMECA). •Implement Built-In-Test (BIT) for new designs including Development and Validation of improvements to existing BIT through lab testing and/or BIT demonstrations •Develop reliability program growth plans, and conduct of reliability growth analysis. •Support of design reviews and test activities as required. •Lead Reliability testing such as Highly Accelerated Life Testing (HALT), Aging and Reliability Qualification Test (RQT). •Participate in Corrective Action Boards (CAB) and Failure Review Boards (FRB). •Identify Failure Review and Corrective Action System (FRACAS) trends to identify and prioritize failure modes to investigate for corrective actions. •Review Engineering Change Proposals (ECP), support Concept Screening Board (CSB) and Configuration Control Board (CCB).

Skill/Experience/Education

Mandatory:

•Experience performing BIT analysis. •Experience performing reliability predictions. •Experience with reliability FRACAS and data mining. •Experience with the FMECA process. •Possess excellent written and oral communication skills, with experience developing and delivering presentations to peers as well as management. •Proficient with Microsoft Office products. •Experience with Winchill software tool. •Must have at least an Interim Secret security clearance prior to start.
Desired:

•Strong electrical background with a good mechanical understanding. •Practical hands on experience with hardware test and troubleshooting. •Analytical thinker with a demonstrated ability of solving complex problems which require ingenuity and innovation. •Candidate should be a self-starter capable of performing assigned tasks with little direction. • Final Secret security clearance.



Interview Required Yes
Max Pay Rate 60.00 USD

Shift1st Shift
OT Allowed Yes (#hours allowed: 10, Pre-Approval Reqd.:Yes)
Travel No
Exempt
 
Job Number: JE-1343
Job Location: Orlando, FL
Rate: 60/hr max
Duration: 6 month contract
Input Date: 09/07/2017
Last Updated: 10/03/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer 4

Description:
REQUIRED EXPERIENCE:
Bachelor's degree in a technical field such as Electrical Engineering, Probability/Statistics, Mathematics, or related disciplines and a minimum of 9 years' relevant experience (7 years with a Master's degree).
Candidate is expected to have an understanding of technical principles, theories, subsystem design, and knowledge of general satellite design.
Ability to perform various reliability related tasks including: providing reliability support to the design team through the performance of design tradeoffs, reliability failure rate/MTBF predictions, de-rating analysis, allocation of reliability requirements, performing failure modes and effects analysis (FMEA) and identify fault modes and responses, identify critical items and document controls, and support to design reviews.
Candidate has a familiarity with functional block diagrams, reliability block diagrams, and ability to interpret schematics.
Candidate must show an understanding of how a unit functions independently as well as interacts with other units.
Candidate must be able to develop technical solutions to potential reliability and availability problems.
Applicant must be able to adapt probability and statistical tools to solve problems involving non-standard configurations and definitions of system success; knowledge of industry tools used to conduct Reliability analysis.
Individual must have the ability to prepare and present briefings to senior leadership and external customers, excellent interpersonal and communication skills and have experience with modeling and simulations, and software analysis tools used in Reliability analysis.
Must be proficient with Microsoft tools.
Preferred Qualifications:
14 Years with Bachelors in Science; 12 Years with Masters; 9 Years with PhD.
Reliability experience in a Space related program.

EDUCATION:
Bachelor's degree in a technical field such as Electrical Engineering, Probability/Statistics, Mathematics, or related disciplines, OR 7 Master's degree is required.

HOURS:
9/80 workweek

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
Candidates responding to this posting must currently possess the eligibility to work in the United States. No third parties please.
 
Job Number: 165215
Job Location: Redondo Beach, CA
Duration: 1 Year
Start Date: ASAP
Input Date: 09/13/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

Reliability Engineer - FL - OM

Description:
Chipton-Ross is seeking a Reliability Engineer in Orlando, FL.

Description
Built-In-Test (BIT) Engineer to execute BIT program on DoD System, to include BIT allocations, predictions, modeling, and Failure Modes, Effects and Criticality Analysis (FMECA). The engineer will monitor suppliers in the development and implementation of BIT architecture, requirements and implementation. Conduct analysis and review of data from system and supplier test events and failures to identify issues and mature the BIT system through corrective action. Prepare and present at design and program reviews. Develop BIT DRSs and support hardware design activities. Support SW Engineers in the implementation of BIT requirements in SRS's. Generate and maintain BIT maturity metrics. Perform Reliability and BIT testing as necessary. Provide Reliability support as required.

Skill/Experience/Education
Mandatory:
- Experience conducting Reliability efforts and testing and verification to include experience with performing reliability predictions, and Failure Mode, Effects, and Criticality Analysis (FMECA) - Experience with Windchill Quality Solutions Reliability software tool or equivalent tool - Experience with reliability Failure Reporting, Analysis, and Corrective Action System (FRACAS) - Maintainability and Testability/Built-In-Test (BIT) engineering experience to include BIT Architecture definition and BIT analysis - Strong interpersonal skills and an ability to build effective working relationships - Strong oral and written communication skills, technical writing experience, and an ability to communicate findings to customers and management

Desired:
- Electrical Engineering degree. - Strong electrical background with a good mechanical understanding. - Diagnostic algorithm development diagnostic tests/procedures to perform fault detection and fault isolation. - Software skills Ability to read code and design requirements for software engineers to write BIT tests. - Ability to teach others BIT / testability. - Practical hands on experience with hardware test and troubleshooting. - Familiarity and ability to model systems with US Army Materiel Systems Analysis Activity (AMSAA) Reliability Growth Planning Models (PM2-Continuous and PM2-Discrete), Reliability Growth Tracking Model (RGTM-C), Reliability Growth Projection Models (ACPM, AMPM, and ADPM), and Reliability Test Planning Tools (IPT-C and IPT-D)

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 165129
Job Location: Orlando, FL
Rate: $DOE
Duration: 12 months
Input Date: 09/07/2017
Last Updated: 09/24/2018
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Repair Station Quality Engineer II

Description:
Repair Station Quality Engineer II
Savannah, GA
Rate: $38-$48


Unique Skills:

Work well in a team environment. Capable of reading and understanding engineering documents and requirements. Self-motivated and minimal supervision required.


Education and Experience Requirements:

Bachelors degree in a related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 4 years related technical exp in a manufacturing environment or repair and overhaul working with quality management systems with continually increasing responsibility. 3 years exp specific to the appropriate Quality department work to be performed.

Position Purpose:

Working under general supervision, in a team oriented environment, perform all tasks in area of responsibility in a timely and efficient manner to support the inspection/quality system ensuring all aspects of the delivered/finished article is manufactured in accordance with approved quality system requirements and is certified as compliant to type design requirements or compliant with in service limitations for Repair Station activities.

Principal Duties and Responsibilities:

Essential Functions: 1. Manage the compliance of the quality activities of suppliers or Company facilities through the application of system, product and process audits to the requirements of the FAA approved data. 2. Certify a supplier or assess a Company facility quality system, personnel, processes and equipment as required to the applicable quality standards. 3. Perform surveillance, source inspections, and first article inspections at supplier facilities, foreign or domestic and/or monitor the inspection system performance throughout all Company Operations, Materials and Repair Stations. 4. Coordinate quality assurance program plans, monitor and modify audit schedules, evaluate acceptance test programs, and quality engineering requirements of Company suppliers or facilities and review to ensure program effectiveness and integrity. 5. Witness and validate acceptance, qualification, interchangeability, configuration and compatibility tests. 6. Provide Gulfstream liaison support regarding supplier or facility performance to established requirements. 7. Coordinate documentation support for FAA Compliance.

Additional Functions: 1. Conduct product, system or process failure investigations, and provide technical assistance in resolution of quality problems. 2. Verify required corrective action implementation for timeliness and effectiveness. 3. Perform trend analysis of audit results to identify quality system deficiencies. 4. Work with other departments as needed to meet quality compliance of parts and processes. 5. Perform other duties as assigned.

Other Requirements: 1. Previous Quality experience relative/complying with Regulatory Standards. 2. Understands and is able to apply and communicate to others: blueprints/specifications; Federal Aviation Regulations; Quality Control System Requirements; knowledge of manufacturing/fabrication techniques and processes 3. Computer literate; capable of working within the various software applications utilized throughout the corporation. 4. ASQ Certification as Quality Engineer or Quality Auditor preferred. 5. A&P license preferred.
 
Job Number: 7816
Job Location: Savannah, GA
Rate: $38-$48
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/25/2017
Last Updated: 09/21/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Advanced Processors - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring Senior Advanced Processors for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• The Advanced Processor shall evaluate processes and configure manufacturing systems to reduce cost, improve sustainability and develop best practices within the production process
• Create complex processes, validate customer processes, write quote letters, contact outside vendors for quotes of their equipment, provide customer and specific deliverables for ALL phases of the quoting process
• Perform all processes in process designer and train colleagues in advanced process designer
• Assist in creating workable libraries and assist in developing the process designer and estimating collaboration

Qualifications:

• Bachelor of Applied Science or graduate degree ( Engineering)
• A minimum of ten (10) years’ of related experience including at least five (5) years’ in an advance processing role and accountability
• Solid experience with expert advanced processing capabilities in all fields (BiW, TCF, Aerospace, logistics and military)
• Champion user of the software process designer

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40024
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/07/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Mechanical Designers - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring Senior Mechanical Designers for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

To develop engineered solutions using an established CAD system from concept through 3-D design and 2-D detailing of tooling for the manufacturing sector in automotive (body-in-white and powertrain), aerospace, construction and forestry industries. To coordinate design and engineering communications and closely work with proposal and estimating, project management, purchasing, manufacturing operations, quality, field service, aftermarket sales and documentation departments.

Job Duties:

• Construct and modify CAD models per customer CAD standards using one or more of the following systems: Catia, Unigrahics, FIDES, AutoCad, Inventor, and Solidworks
• Estimate design hours for tool concept to design and release for original content as well as changes
• Prepare layout and detail drawings of design as required to project timelines
• Develop creative and innovative engineered solutions that meet or exceed customer requirements
• Review and study customer specifications, engineering schematics and other data in order to determine the design procedures needed to generate and release digital and/or hardcopy printouts related to the engineering and manufacturing requirements
• Perform necessary engineering calculations and proper material selection to satisfy the required design functionality
• Coordinate any structural and/or finite element analysis that need to be performed for assessing the functionality of the tools designed
• Coordinate the development of part drawings, including CAD drawings, through other designers, internal or outsourced, to comprehensively manage the complete design of the tools that are assigned
• Meet and review design details and function with customer engineer and designer per Quality Stage Gate requirements as stipulated by customer for design reviews
• Work effectively to project budgets and timelines, with constant awareness to design within the project budget constraints
• Work closely with customer engineer and/or designer on design changes to improve manufacturability, maintainability and serviceability of equipment
• Verify the completeness and the accuracy of the CAD model and data before final release of the drawings for purchasing or fabrication and before final storage of the data for future retrieval, with significant prior expertise and experience in checking detail drawings for the manufacturing tooling industry
• Be knowledgeable of the release systems and procedures, and release all the necessary detail drawings in digital and/or hardcopy formats per established requirements of the internal and external customers (for example release to purchasing for make/buy decision, input for controls design and engineering, and documents to support field installation and service personnel, direct digital transfers to customer systems)
• Possess general awareness of Geometric Dimensioning and Tolerancing (GD&T) concepts and its application in manufacturing and assembly sectors in automotive, aerospace, construction and forestry industries
• Be knowledgeable about the FMEA, 8-D and structural analysis (FEA) performed on the tools and/or the process stations using the tool(s) assigned. Initiate ideas and coordinate efforts for continuous improvement of product/tool and process

Qualifications:

• A Bachelor of Applied Science or Mechanical Engineering degree or equivalent from a recognized University is preferred or an Associate Degree/Engineering Diploma, preferably with a specialization in design and drafting, from a recognized Community College or equivalent experience as assessed by the Hiring Manager
• Specialized training with certifications where applicable from recognized training organizations, in the use of CAD systems and software, such Catia, Unigrahics, FIDES, AutoCad, Inventor, Solidwork
• A minimum of 10 years of direct experience and demonstrated capabilities in concepting, 3-D designing and 2-d detailing by consistently using one or more of the above mentioned CAD systems for the design of manufacturing and assembly tooling, which include geo, respot, end-of-arm tooling, etc.
• Experience in one or more of the following industries is a must – automotive, aerospace, construction and forestry vehicles/equipment manufacturing industries
• In the automotive manufacturing industry, specific experience focused in any one or more of the following areas is highly recommended: body-in-white welding and assembly, closure hanging, powertrain manufacturing and assembly (including machining and assembly automation, material handling systems, component washers, leak-testers, functional testing machines), final assembly, or material handling in manufacturing plants
• Leadership abilities in coordinating design related tasks among peers, Junior Designer inside the Company or from engineering design outsource agencies and holding them accountable to deliver on time per the project timeline and ensuring quality of CAD data
• Ability to effectively prioritize and execute tasks in a high pressure environment including following on tool s during the fabrication, build installation and commissioning phases of the project
• Ability and willingness to travel to any of the customer and Company’s work locations in North America, Europe and Asia, as required by Management
• Must be willing to work extended hours, when necessary, including overtime, weekends and holidays and on night shift, as project and customer demands dictate
• Excellent interpersonal, written and verbal communication skills
• Ability to work with others, including peers and personnel in other departments
• Eligibility for clearance under the Canadian Controlled Goods and the American ITAR requirements

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39986
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Service and Repair(aerospace)

Description:
Role: Service and Repair(aerospace)

Location: salt lake city, UT

Duration:5-6 months+



**Computer Literacy is a must, assembly experience is not required as candidate can be trained on the assembly process**

Required Skills/Qualifications:
• Must show proof of Hepatitis B shots or willing to get shots (company paid)
• Ability to read and understand Device/Work instructions
• Ability to record data on documentation and in computer software
• Ability to understand verbal work instructions from Supervisor
• Ability to lift up to 25 pounds on a repeated basis
• Close vision (clear vision at 20 inches or less) / Color vision (ability to identify and distinguish colors)
• Depth perception (three-dimensional vision, ability to judge distances and spatial relationships)
• Basic knowledge of windows based computer software
• Basic math skills
• Ability to perform these operations using units of American money and weight measurement, volume, and distance
• Ability to carry out tasks through detailed written or oral instructions
• Ability to deal with problems involving a few concrete variables in standardized situations
• Able to succeed in highly regulated compliance oriented environment while still providing service excellence

Preferred Qualifications:
• IPC soldering certification preferred

Education and/or Experience:
High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.
 
Job Number: 52284
Job Location: salt lake city, UT
Overtime: yes
Duration: 5-6 months
Input Date: 09/06/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bala
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation & Software Engineer

Description:
Simulation & Software Engineer
Savannah, GA
Long Term Contract
$58.00-63.00/Hr

Unique Skills:
1. Matlab/Simulink experience modeling real time aircraft systems
2. Aerospace background with avionics lab testing experience
3. Ability to understand aircraft electrical wiring diagrams as it relates to HIL simulation
4. Experience with high level programming or scripting language such as C/C++, Python
5. Knowledge of data protocols used in aerospace
6. Experience modeling aircraft systems in real time on industry standard simulation platforms (eg NI, Speedgoat, Dspace,ADI)
7. Flight and/or aircraft system lab HIL simulation experience
8. Ability to work independently and self-govern priorities in accordance with lab customer needs

Job Description
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7079
Job Location: Savannah, GA
Rate: 58.00-63.00/Hr
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/22/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Software Developer

Description:
OOP, C++, Linux, scripting language, secret clearance
 
Job Location: Denver, CO
Input Date: 04/17/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Michael Geil
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Email: mgeil@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Seeking an embedded software engineer to support development, maintenance, integration and lab/flight testing of software for the Multispectral Targeting System (MTS) family of programs. The software engineer will work with program engineers of multiple disciplines to help achieve program goals under the direction of SW project and technical leads.
Requires 15+ years of embedded software experience in C/C++ or Ada. Requires excellent teaming and communications skills. Must be willing to work in lab environments and support software, firmware, and hardware integration and testing. Prior experience working for a defense contractor is desired. Current or prior DOD clearance is a plus. Experience on an Agile/Scrum team is helpful.
 
Job Number: 1000
Job Location: McKinney, TX
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 09/12/2017
Firm Name: UNIVERSAL STAFFING SERVICES
Attention: Nancy Boyce
Address: 628 HEBRON AVE
City, State: GLASTONBURY, CT 06033
Phone: 860/527-8135
Website: www.ussjobs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
U.S. citizenship is required.

Candidate should have direct experience in imaging processing, preferably real-time processing

Knowledge/experience with Application program interface (API) set of routines, protocols, and tools for building software for image processing is highly desirable
Candidate should be skilled in C/C++, Python, MATLAB, or similar tools
Due to the nature of work performed within our facilities

Bachelor's degree in software engineering or a related technical field, plus a minimum of 8 years of relevant experience; or Master's degree plus a minimum of 6 years of relevant experience.

Agile experience preferred.
 
Job Number: 40604
Job Location: NJ
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 09/01/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Notes from the Hiring Manager:

* Position is for direct hire / perm placement but you'll be working onsite at a client in Gaithersburg, MD
* Needs an active TS/SCI Clearance; may consider inactive TS/SCI Clearance if able to be transferred to active
* Will act as the Subject Matter Expert (SME) & must have outgoing personality & excellent communication skills
* Geographic Scope (GS) Spatial Scientist or Geography/Geographic background preferred

Summary

Seeking a talented and creative Senior Enterprise Web Services Developer to join software team and help design, develop, test and deploy our web-based geospatial software product line. This position will be based out of Gaithersburg, MD, but will also require customer site visits and regular visits to the main office in Sterling, VA. Candidates must possess strong verbal and written communication skills as they will need to participate on the program’s SCRUM teams. Daily responsibilities will include gathering requirements for web-based imagery exploitation tools, enhancing our current imagery exploitation to meet new requirements, integrating solutions into the program’s enterprise architecture, and assisting with deployment to the customer site.

Specific Duties:
> Requirements analysis, design, and development of web services and application software
> Integrating web-based applications and services into larger geospatial exploitation enterprise systems
> Help capture and evolve future requirements and develop best practices for web developers
> Working with onsite development teams to define clean client-server interfaces and quality assurance teams to define testing strategies
> Interacting with government and prime contractor personnel throughout the program lifecycle

Qualifications:
> Applicants must demonstrate proficiency at understanding geospatial software products at a technical level and how these products interoperate with other technologies.
> Applicants must be accomplished web developers experienced in the entire software development lifecycle.
> Successful candidates will have the ability to prioritize and to complete multiple concurrent tasks in a fast-paced, deadline-driven environment.
> Experience with Web Services/SOA/SaaS architectures
> Experience implementing RIA applications using REST/JSON
> Knowledge of modern web technologies: HTML5, CSS3, JavaScript, browser compatibilities, mobile, etc.
> Experience with elastic cloud architectures (AWS, Azure, etc.)
> Experience with AGILE development methodologies
> Educational background or work experience in either imaging or geospatial sciences is a strong plus
> Ability to communicate complex technical concepts to a diverse audience, including upper management and customers
> Ability to work cooperatively in multi-discipline teams is essential

Requirements:
> Bachelor’s degree in Computer Science, Information Systems, Remote Sensing, GIS or a related field.
> 3 - 5+ years of relevant software development experience in a team environment
> An active TS/SCI security clearance (see notes above also)

Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
 
Job Number: 035_2017
Job Location: Gaithersburg, MD
Rate: Open
Per Diem: No
Overtime: Yes
Duration: Direct / Perm Hire
Start Date: ASAP
Input Date: 08/17/2017
Last Updated: 04/02/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Candidates for this position use and apply extensive advanced software quality practices, principles, theories, concepts and techniques associated with the evaluation of supplied and ship board software, firmware and configurable logic developed for embedded and networked multi-processor systems designed to support ship based network and compute services supporting fleet assets. Provides solutions to complex technical software integration problems using established engineering practices. Works as a self starter. Follows and recommends changes to processes and procedures when poor performance is identified. Reviews software products and processes for appropriate performance to contract requirements, software directives and reviews work practices for adequacy. Provides guidance both to project staff and cross business teams as required. Guides the successful completion of program quality assessments and milestone reviews and may function in a software quality guide role for some efforts. Interacts with senior product development and test personnel through both written and verbal communication. Has extensive knowledge of emerging software quality technologies including information assurance and code quality analysis through the use of tools. Conducts and documents supplier and ship board installations of engineering materials related to the design and release of software artifacts. Supports integration lab and on ship integration of advanced software products and services, and influences the successful completion of supported programs and projects. Ultimately you will help to ensure programs meet customer objectives for Mission Assurance by working closely with other Cross Business Teams (CBTs), to affect rapid closure of issues utilizing analytical capabilities and communication skills. You will work in a results based culture with a strong focus on continuous improvement.


Additional Job Details: Desired Experience, Knowledge, and/or Skills: The Quality Program Lead - QPL is responsible for supporting the offsite implementation of an effective Systems and Software Quality program designed to minimize development risk and ensure technically correct work products. Responsible tasks include, but not limited to, analysis of software requirements, understanding information assurance requirements, guiding peer review of software and systems engineering artifacts (source code, design artifacts, test plans and procedures), performing independent assessments of supplier software development process goals and objectives and approving supplier software content and services and at times witnessing supplier acceptance testing and at times conducting software supplier configuration audits and verifying associated deliverable documents such as supplier software version description documents (SVDD) or equivalent. Required Skills: • Minimum 8+ years of direct related experience in Software Quality Engineering or Software Engineering • Programming experience in UNIX/LINUX, Windows environments using Java, C, C++, or C# • Knowledgeable of Software Processes; the Software Engineering Institute (SEI), the Capability Maturity Model (CMM) and Capability Maturity Model Integrated (CMMI), the software lifecycle; requirements, design, implementation, and software testing • Experience with the development and analysis of System/Software requirements • Experience in supporting Agile/Scrum software development and Rational Team Concert tools • Proficient computer skills in MS Word, Excel, and PowerPoint • Must be able to effectively express ideas in written and verbal form • Demonstrated problem solving, and organizational, planning, multitasking and interpersonal skills required • Experience in holding a lead role on a project in a quality or engineering discipline • Experience in supporting a product based matrixed organization with multiple programs, in various stages of development and production • Experience in coordinating efforts across multiple programs, managing conflicting schedules and priorities • Experience in supporting multiple SW · Experience in AS9100C, AS9115 and ISO 9001:2008 requirements as well as software development guidance of IEEE/EIA/ISO12207 Standard for Information Technology – Software life cycle processes • Has an active DoD Secret security clearance · Desired Skills: · Working knowledge of a Requirements Management Tool such as DOORS, Rational Team Concert · Understanding of computer technologies, environments, and datacenters and their engineering integration into mission system design. · Ability to manage multiple tasks, positively influence team members, establish and maintain excellent customer relationships and deliver positive results. · Experience with real-time operating systems · Experience with COTS secure products · Knowledge in configuration management and control tools i.e. Rational ClearCase, ClearQuest, PDM, Defect Logger, iTracker • Required Education: • B.S. Degree in Computer Science, Engineering, Science or Mathematics
 
Job Number: 7254769
Job Location: San Diego, CA
Rate: DOE
Duration: 6-9 Months
Input Date: 08/17/2017
Last Updated: 09/25/2017
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Level 3 / no clearance / SAP HANA, Data Services and Business Objects, Tableau TX

Description:
160132
Requirement #EBS-REQ-0834

Work Location FORT WORTH, TX
Work Week 9/80-A
Needed Date 07/31/2017
End Date 01/31/2018
Number of Resources 1
Security Clearance No clearance


Type of Service:Information Technology
Title:Software Engineer - Level 3

Description

Skill/Experience/Education
Mandatory:

HANA, Data Services and Business Objects, Tableau
Desired:

HANAXS

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
SAP HANA 0-3 Years Yes


Interview Required Yes

Shift 1st Shift
OT Allowed No
Travel No
Non-Exempt
 
Job Number: JE-0834
Job Location: Fort Worth, TX
Rate: open rate
Duration: 6 month contract
Input Date: 08/15/2017
Last Updated: 09/14/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Level 3 with active secret FL

Description:
Requirement #MFC-REQ-1439
Work Location Orlando, FL
Work Week 9/80-A

Needed Date 07/31/2017
End Date 07/30/2018
Number of Resources 2
Security Clearance Secret



Type of Service:Engineering
Title:Software Engineer - Level 3
Description
Software engineer to develop software requirements and architecture for Next Gen EODAS using a Linux operating system running on a multi-core Intel processor board. Candidate is responsible for software requirements, design, code, test, and integration activities. Candidate should be proficient using C++ with real-time embedded software development and integration experience. Previous experience with Linux and DDS is highly desirable. Candidate will need to apply appropriate standards, processes, procedures and tools throughout the software life cycle..
Skill/Experience/Education
Mandatory:

• C++, C# development experience
• Real-time embedded software development and integration experience
• Excellent communication and teaming skills
Desired:

• Linux and DDS

Interview Required No
Max Pay Rate 80.00 USD

OT Allowed No
Travel No
Non-Exempt
 
Job Number: JE-1439
Job Location: Orlando, FL
Rate: 70-80/hr max
Duration: 12 month contract
Input Date: 07/31/2017
Last Updated: 09/25/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Level 3 with active secret FL

Description:
159968
Requirement #MFC-REQ-1438
Work Location Orlando, FL
Work Week 9/80-A
Needed Date 07/31/2017
End Date 07/30/2018
Number of Resources 1
Security Clearance Secret


Type of Service:Engineering
Title:Software Engineer - Level 3

Description
Software development of real-time, embedded application for JASSM cruise missile Operational Flight Program (OFP) and associated documentation. Partition and re-host single processor Ada OFP application to dual processor, multi-core architecture. Translate software requirements into design and implement software code in Ada 95 and C programming languages. Perform unit test and software/hardware integration on new architecture. OFP has GPS aided inertial navigation, guidance, autopilot, launch sequence and control, gimbal LOS control, IR seeker image processing, mission data transfer and 1553 interface algorithms. Must have experience in hardware/software integration and full software development lifecycle process including requirements analysis, design, code, integration, test and verification. Perform software builds using Ada cross-compiler for PowerPC target processor hosted on Windows environment and debug using Greenhills Software Multi IDE. Also perform debug in an embedded environment using telemetry, data collection and data reduction tools to acquire and analyze data.
Skill/Experience/Education
Mandatory:

• Ada 95, C development experience
• Experience in hardware/software integration
• Full software development lifecycle process including requirements analysis, design, code, integration, test and verification


Interview Required No
Max Pay Rate 80.00 USD
Shift
OT Allowed No
Travel No
Non-Exempt
 
Job Number: JE-1438
Job Location: Orlando, FL
Rate: 70-80/hr max
Duration: 12 month contract
Input Date: 07/25/2017
Last Updated: 09/25/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer / no clearance / SQL Python Java TX

Description:
160171
Requirement #AERO-REQ-0626
Work Location Fort Worth, TX
Work Week 9/80-A
Priority High
Needed Date 08/21/2017
End Date 12/22/2017
Number of Resources 1
Security Clearance No Clearance


Title: Software Engineer

Description
Designs, develops, troubleshoots, debugs, configures and maintains ETL and Tableau products for internal and external communications for the company and/or for external customers and clients. Designs Tableau layout, graphics, color schemes, and infrastructure to maintain a cohesive message based on the organization's communications strategies and goals. Researches and evaluates new related technologies. ETL Development. Interacting with functional personnel on technical matters and supporting user acceptance testing. Develops, inspects, mines, transforms, and models data to raise productivity, improve decision making, and gain competitive advantage in an engineering setting. Maintains analytical systems, verifies the accuracy of the data, and acts as liaison with business. Works with technical developers and data scientists to define business outcomes and govern capabilities.
Skill/Experience/Education
Mandatory:

Software Development experience. Experience using Tableau to create reports and additional experience using one of the following: Python, SQL, Java
Desired:

SQL Python Java

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Software Engineering
0-3 Years No

OT Allowed Yes (#hours allowed: 10, Pre-Approval Reqd.:Yes)
Travel No
Non-Exempt

0-4 YrsPay Rate: 52.00 USD
5-8 YrsPay Rate: 56.00 USD
9+ YrsPay Rate: 60.00 USD
 
Job Number: JE-0626
Job Location: Fort Worth, TX
Rate: 52-60/hr max
Duration: 4 month contract
Input Date: 09/26/2017
Last Updated: 10/05/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer II/III - (OK)

Description:
US CITIZEN ONLY. SECRET CLEARANCE NOT REQUIRED TO START.

We are seeking a highly qualified Software Engineer to support the Avionics Software product development activities throughout the aircraft modification
lifecycle. The Aircraft Platform Software Team is responsible for the software architecture and design modifications of the following system components:
- Flight Management
- Navigation
- Test Modes, Monitoring and Reporting
- Mission Management
- Operator Controls and Displays
- Sensor Management
- Communication Systems
- Weapon Management

Responsibilities for this position include working with an engineering team to develop software products through all phases (requirements, design, development, and integration/test).

Experience with Rationale DOORs, Clearcase, and Clearquest
- Experience with the software estimating process
- Experience with export controls
- Minimum of 5+ years working on large complex development system/activities
- Experience in technical leadership of complex Software Architectures
- Experience with DO-178B assurance levels and/or Agile Software methods
- Experience with Ada, C, C++, and C# and scripting programming languages
- Experience with Unix and Linux Operating Systems
- Experience with Real-Time POSIX Operating Systems (VxWorks, Integrity, etc.)

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Number: SWOK
Job Location: Tinnker AFB, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 07/19/2017
Last Updated: 09/25/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer Sr with active secret / Ada NY

Description:
160120/1522

Work Location OWEGO, NY
Work Week 9/80-A
Priority Medium
Needed Date 09/11/2017
End Date 03/09/2018
Number of Resources 2
Security Clearance Active Secret to start



Title: Software Engineer Sr

Description
Work in military avionics/aerospace systems/subsystems integration applications. Ada programing language is strongly desired. Additional knowledge of C/C++/C# Language is acceptable. Ada/Ada95, DoD standards and development, familiar with fixed wing/helo systems, embedded applications/dev, Wind River VxWorks RTOS and interface layers, Visual Studio, .net framework, Team Foundation Server. Additional experience with low level graphics and intel/Linux OpenGL experience is desirable. The successful candidate must be flexible, motivated, details-focused, team-oriented and demonstrate a strong work ethic along with the ability to multi-task. Designs, develops, operates, maintains, and documents software and firmware components and computing systems software to be applied to engineering, scientific, and manufacturing requirements. Applies the required standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and environments as aerospace /avionics applications, mission support applications, laboratory simulation/emulation systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, as well as other technical, management and support personnel.
Attachments: Owego Software.docx
Skill/Experience/Education
Mandatory:

Secret clearance. Ada/Ada95.


Desired:

Ada/Ada95, DoD standards and development, familiar with fixed wing/helo systems, embedded applications/dev, Wind River VxWorks RTOS and interface layers, Visual Studio, .net framework, Team Foundation Server.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Ada/Ada 95 4-5 Years Yes


Interview Required Yes
Min Pay Rate 45.00 USD
Max Pay Rate 85.00 USD

Shift 1st Shift
OT Allowed Yes (#hours allowed: 5, Pre-Approval Reqd.:Yes)
Travel No
Exempt
 
Job Number: JE-1522
Job Location: Owego, NY
Rate: 45-85 DOE
Duration: 6 month contract
Input Date: 08/14/2017
Last Updated: 09/25/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret / Matlab Simulink CA

Description:
160101
Requirement #AERO-REQ-0625
Work Location Palmdale, CA
Work WeeK 9/80-A
Priority High
Needed Date 08/29/2017
End Date 05/29/2018
Number of Resources 1
Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)


Title: Software Engineer

Description
Develop, analyze, integrate, and test flight control laws and embedded software for the Advanced Development Programs (ADP, Skunk Works) Flight Control and Vehicle Management Systems Integration team. Contribute to software requirements, design, code, reviews, and test of operational flight programs. Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment. Selected applicant will be subjected to government security investigation and must meet eligibility requirements for access to classified information and special program clearances
Candidate must possess an active SECRET clearance.

Skill/Experience/Education
Mandatory:

Candidate must have Flight Control system experience and Experience with MATLAB, OR Simulink
Candidate must possess an active SECRET clearance.
Desired:

Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0625
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 9 month contract
Input Date: 04/18/2018
Last Updated: 04/19/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer wtih active secret UT

Description:
REQ 0495 – Software Engineer w/ clearance – Ogden UT-
Will update with job description
 
Job Number: JE-0495
Job Location: Ogden, UT
Input Date: 08/28/2017
Last Updated: 09/18/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer – Level 3

Description:
Location: Denver, CO
Rate: DOE
Duration: 1 Year

**MUST be a U.S. Citizen**

Job Description:
- Position is for a HCS FSW Contractor
- Contract labor to support our client, an aerospace company, with INCA and EDS in support of the Commercial Crew Program (CCP) and the Intermediate Cryogenic Propulsive Stage (ICPS) programs.
- Required to perform total embedded software product lifecycle development.
- The software engineer is required to execute requirements analysis, software design and implementation, and perform verification and validation tasks.
- Subcontractor will need to have an aerospace engineering background to be able to understand the physics of the systems (tank pressures, engines, actuators, avionics) being coded and to do the unit test review required to verify that the coding requirements have been satisfied in each test.
- Experience with the real-time embedded systems, Ada programming language, Linux operating system, and the Eclipse development environment is desired.
- This position will perform EDS and ICPS FSW development work scope which is short term in nature, with the primary effort finishing within one year.
-Bachelor's degree or higher required.
 
Job Number: 7664
Job Location: Denver, CO
Rate: DOE
Per Diem: Split Possible
Overtime: No
Duration: 1 yr
Input Date: 07/27/2017
Last Updated: 10/06/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineering Support Representative

Description:
Centennial, CO
1 year contract
Rate: $40.00 - $55.00/HR

Description:

The Business Support Rep will Provide business operations support throughout the entire software development life-cycle. Activities include meeting scheduling and preparations, administration of the issue tracking and configuration management databases, processing of customer data requests and data deliveries. An additional task is data entry into our requirements management tool of all flight software requirements and associated verification plans and results supporting all development programs. Knowledgeable in Microsoft Office suite of tools. This position will perform mission unique work scope which is short term in nature, with the primary effort finishing within one year.
 
Job Number: 7810
Job Location: Centennial, CO
Rate: $40.00 - $55.00/HR
Per Diem: Split Possible
Overtime: No
Duration: 1yr
Input Date: 08/24/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Electrical Engineer II - Clearance / ability to obtain and retain a Secret security Clearance AZ TX AL

Description:
160219/7317190

Sr Electrical Engineer II - Clearance (7317190)
- Huntsville, Tucson or McKinney
Must be able to obtain secret clearance

Senior Designer or Electrical Engineer to contribute
to the design, analysis, simulation, test, and
integration of digital electronic modules and/or CCAs
for Missile applications. The Senior Electrical
Engineer must be experienced in all aspects of circuit
card design from concept through delivery to higher
level assemblies as evidenced by multiple successful
design completions (including hardware designs with
processors, FPGAs, memory, and industry interfaces,such as PCIe, Ethernet, I2C, UART). This position
will function in multi-disciplined design teams across
multiple projects. This person will be the
Responsible Engineering Authority (REA) for
development of one or more complex modules, CCAs
or units and will be expected to apply rigorous and
systematic design processes to ensure total design
compliance. This position will interface with
Integrated Product Team Leads (IPTL) and stake
holders to ensure program objectives are achieved.
The position requires frequent use and application of
technical standards, principles, concepts and
techniques. Candidates will be expected to provide
solutions to a variety of technical problems of
moderate scope and complexity, working under
general supervision. Successful candidate should
expect to be immersed in a fast-paced, team-based,
and challenging technical environment where an
individual with talent and initiative can stand out and thrive.

Required Skills: • U.S Citizenship required The ability to obtain and retain a Secret security Clearance • Minimum of 6 years Engineering design experience, with at least 2 years in a senior position • A self-motivated and effective communicator • Ability to prioritize work of others and handle multiple tasks at a time • Experience in the development and design of electronic circuit designs, multi-assembly system/unit design, processor designs a plus • Proven ability to take a design concept from the block diagram or requirements level and develop a complete hardware design, and verifying via test and integration • Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution. • Experience with embedded test techniques, design for test, design margin analysis and design for production • A strong advocate for process improvement • Experience in managing schedule and resources to meet assigned milestones • Capable of functioning in multi-disciplined design teams across multiple projects Desired Skills: • Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES) • Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB) • Experience with intellectual property generation (patents & publications) • Team and project leadership skills • Knowledge of software and/or FPGA code development • Experience leading a program transition from development to production • Demonstrated ability to manage technical and schedule risks and to identify cost reduction opportunities • Knowledgeable in cost/schedule development and management Required Education (including Major): Bachelor’s Degree in Electrical Engineering (MS preferred) or similar degree and meets the experience
 
Job Number: MB-7317190
Job Location: Huntsville, Tucson or McKinney, AL, AZ, TX
Rate: DOE
Duration: 6-12 month contract
Input Date: 09/18/2017
Last Updated: 09/29/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Software Engineer II / current or prior clearance / C/C++ or Ada TX

Description:
160327
Sr Software Engineer II (7374482)
Raytheon US
6-12 month(s) CTH
TX190 2501 West University McKinney TX United States
75/hr max


Seeking an embedded software engineer to support development, maintenance, integration and lab/flight testing of software for the Multispectral Targeting System (MTS) family of programs. The software engineer will work with program engineers of multiple disciplines to help achieve program goals under the direction of SW project and technical leads.
Requires 15+ years of embedded software experience in C/C++ or Ada. Requires excellent teaming and communications skills. Must be willing to work in lab environments and support software, firmware, and hardware integration and testing. Prior experience working for a defense contractor is desired. Current or prior DOD clearance is a plus. Experience on an Agile/Scrum team is helpful.
 
Job Number: MB-7374482
Job Location: McKinney, TX
Rate: 70-75/hr max
Duration: 6-12 month contract
Input Date: 09/18/2017
Last Updated: 10/04/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Technical Engineer VI

Description:
Essential Duties and Responsibilities:
Reliability Centered Maintenance Analyst (RCM), support FRCSW, NAS North Island, San Diego, CA.
Perform analyses, effectively using NAVAIR software to document (RCM) analyses, drafting reports, papers, and presentations on results of RCM analyses.
Candidate will also be performing basic statistical and cost analyses, and participate in RCM system expert team meetings and interviews.
Performs other duties as required.

Qualifications & Skills Requirements:
5 years of relevant experience
BS or a BA degree. ALLOWABLE SUBSTITUTION: An additional five (5) years of acquisition or operational logistics management experience may be substituted for a BS or BA degree.
Active (current) Secret Clearance is required.
Experience in aviation maintenance with exposure to aircraft, aircraft systems, ground support equipment, trend analysis or reliability analysis is highly desired.
Candidate should have a working knowledge of MRC decks, aircraft maintenance plans, aircraft maintenance and systems.
Familiarity with IRCMS reliability software, and any/all phases of Design Interface Maintenance Planning is highly desired.
Reliability Centered Maintenance (RCM) training is considered a definite plus, but is not required.
Candidate should be able to demonstrate the ability to collect, sort and analyze various qualitative and quantitative data.
Candidate should have a working knowledge of Naval Aviation Maintenance Planning, PMIC’s, MRC decks, CNAF 4790.2, aircraft maintenance plans, aircraft maintenance and systems.
The candidate will be expected to be proficient with the Microsoft Office suite of software tools (Outlook, Word, Excel, and PowerPoint)

Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to stand and/or walk and occasionally lift and/or move up to 10 pounds. Will need to be able to move throughout the office and talk/hear or otherwise communicate with other employees and management. Work will be performed in an office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.

LMI Aerospace Engineering Services is an E-Verify EOE/Minorities/Females/Disability/Vets employer

Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
 

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Technical Writer

Description:
Sr. Technical Writer should have extensive experience developing new and making revisions to Instructions for Continued Airworthiness (ICA) procedures. Experience should include, but not limited to, on-aircraft field level maintenance and inspection procedures, wire diagram and/or standard wire practice manual content from supplier and engineering data. Experience with ENOVIA SmarTeam or similar Product Lifecycle Management (PLM) database products strong desire. Familiarization with CATIA three-dimensional (3D) modeling and two-dimensional (2D) CAD standards, format, and 3D/2D software products

Bachelor’s degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology. See Other Requirements in Job Description.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/31/2017
Last Updated: 09/15/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stock Clerks - Palmdale, CA

Description:
STS AeroStaff Services is hiring Stock Clerks in Palmdale, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Performs a combination of manual and clerical duties to receive, store, and issue equipment, materials, and supplies in a central warehouse
• Examines stock to verify conformance to specifications and invoices
• Stores articles according to identifying factors
• Fills orders or issues supplies from stock
• Requisitions stock to fill incoming orders; and prepares stock use reports
• Determines methods or places for storage considering guidelines for temperature, humidity, weight or height limits, turnover, floor loading capacity, and required space
• Exclude shipping and/or receiving clerks

Basic Qualifications:

• High School Diploma plus 0 years of experience
• Reach Lift and Forklift certified
• Ability to frequently move and position objects weighing up to 40lbs.
• Familiar with Office Suite

Preferred Qualifications:

• Experience with SAP software
• Industry experience

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40077
Job Location: Palmdale, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/27/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Structural Design Engineer

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.

Email resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss. 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • Must have active secret clearance or active within the last 2 years
  • Composite experience 

Email resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss. 
 
Job Number: 1610051299
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 06/07/2017
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydebAAA&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051187
Job Location: Greenville, TX
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLuAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051188
Job Location: Warner Robins, GA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLzAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051180
Job Location: Fort Worth, TX
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLLAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US.
 Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051186
Job Location: CO Springs, CO
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLpAAI&URLSource=cjhunter