Job Search Results

921 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/01/20 Saturday 02:46PM Pacific Time by ContractJobHunter. )

Listings 1 - 921

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2146 - AVIONICS SYSTEM ENGINEER - resume word doc. only

Description:
Perform technical integration activities associated with all Client Avionic systems.

Generate requirements, analyze, review and approve system designs, oversee system integration, coordinate with various Integrated Product Teams/Suppliers, work with all departments for design validation and verification, testing and certification and provide support to certification authorities as required.

Review and approve the suppliers design through participation in the supplier's development, design, manufacture, integration, and verification process.

Assist in functional, integration, qualification, and ground/flight testing of all the Client avionics systems.

Perform ground and/or flight testing activities for Client avionics systems on dedicated specialist test rigs.

Develop testing procedures, perform test preparation and undertake test vehicle validation.

Participate in troubleshooting and develop/implement resolution plans when testing anomalies occur.

Be asked to work on various avionics systems including but not limited to: Auto-flight: Flight guidance, Auto-throttle, Autoland;
Flight Displays: EFIS, EICAS, HUD;
Flight Management Systems (FMS): Navigation, RNP etc.
FANS/LINK 2000
Communications including VHF, CPDLC, HF, SATCOM etc.
Digital Integration: Integrated Modular Avionics, Data-buses ARINC 429, AFDX, TTP etc).
CVR/FDR, Inertial Reference System and other Client secondary Avionics Systems.


University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent.

Must have 15 or more years of relevant aerospace systems experience.

Have a good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Have a good knowledge of RTCA documents DO-178 and DO-160.

Are familiar with part FAR25 / 525 certification process and with the ARP4754 standard.

Have an experience with civil aircraft in a production or maintenance environment (asset).

Have strong communication skills (written and spoken).

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc). Weekend, night and evening shift may be expected.

Occasional business trips to Wichita, KS may occur.
 
Job Number: 2146
Job Location: Mirabel, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2153 - DESIGN/STRESS SPECIALIST - Word document only please.

Description:
Work in a very dynamic integrated product development team (IPDT) involving all technical and production functions.

Put forward optimal solutions for major aircraft structures suitable for latest manufacturing technologies and processes.

Carry out technical feasibility studies, preliminary concepts, volume management for equipment, interfaces requirement, technical review.

Support to IPDT and Suppliers.

Work on Trade Studies, test plans, Installation and detail drawings.

Support experimental testing and entry into service.

University mechanical or civil or aerospace engineering degree.

Minimum of 15 years of relevant experience.

Must have experience in Primary and Secondary Aircraft Structures.

Must have experience with Mechanical systems and systems installations.

Experience in design and creation of MBD and 2D drawings of detail parts (machined parts, sheet metal), assemblies and installation drawings in CATIA V5.

Must have working knowledge of CATIA V5 (minimum 2000H experience).

Ability to understand complex engineering issues.

Basic knowledge required:
- 3D and MBD creation in CATIA V5
- GD&T and technical drawings
- Certification rules
- Manufacturing requirements

Must be computer literate and familiar with commonly used software (MS Office).

Experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Have the knowledge of CATIA, finite element modeling and analysis is an asset.

Have general computer skills - essential.

Are a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Read and write in English and have good communication skills.
Being bilingual (French and English), is an asset.
 
Job Number: 2153
Job Location: Montreal, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 06/19/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2168 - LIAISON ENGINEER - MRB - resume - word doc. only

Description:
Support daily production, completions and delivery operations in our manufacturing and assembly areas;

Design, analyze and disposition repairs for structural non-conformances in a timely manner to restore design integrity in sub-assembly, final line and preflight areas of Bombardier Aerospace.

Rapidly design repairs based on equivalent strength / stiffness of surrounding structure while in a production schedule-driven environment.

Interpret engineering drawings, specs & provide guidance to employees and Methods & Production.

Adhere to Bombardier Aerospace Materiel Review Board (MRB) and Quality Assurance (QA) procedures.

Maintain a current and up-to-date knowledge of developments in aircraft structures in order to recommend innovations to improve the quality, economy, and effectiveness of company products.

Participate in projects that aim to increase productivity, reduce waste and improve financial performance;

Work in close cooperation with other Engineering disciplines such as Systems, Stress, Materials & Processes,

Propulsion, and Support Groups such as Logistics, Methods & Quality in order to achieve the company's business objectives.

University or a College degree in Aerospace or Mechanical engineering or in a related field.

Minimum of 3 years of Material Review Board (MRB) or airframe design experience in aerospace.

In-depth knowledge of aircraft structures & system installation technical requirements.

Have a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure production environment.

Practical working experience using Catia V4/V5 or AutoCAD.

Must have experience (browser experience) with CATIA and Enovia V5.

NCMS - MRB Software experience is an asset.

Must have prior MRB Experience.

Candidates must have relevant experience in Liaison.

Flexible in schedule as assembly equipment occurs on multiple shifts (day, evening, night and weekend).

Bilingual (French and English) is an asset.
 
Job Number: 2168
Job Location: Mirabel, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 07/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2183 - STRESS ENGINEER - resume - cv. word doc only

Description:
Preliminary and detailed sizings.

Stress analyses to ensure requirements (strength, fatigue, damage tolerance, weights, customers) are met.

Validation of engineering drawings and IPDT support.

Preparation of certification reports and support to entry-into-service.

Have a University mechanical or civil or aerospace engineering degree with a minimum of 5 years relevant experience. Your experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Knowledge of CATIA, finite element modeling and analysis is an asset. General computer skills are essential.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Must be able to read and write in English and have good communication skills. Being completely bilingual (French and English) is an asset.

Must have knowledge and experience of structural sizing methodologies.

Must be competent in one of the following and have some knowledge of all other aspects of analysis (Structural stress analysis, FEM, fatigue/DTA and loads).

Must have experience in at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Must have Excellent knowledge of aircraft structure and system installation technical requirements ( TCCA, FAA & EASA).

Must have Experience of working with new design and must be able to demonstrate understanding of aircraft component load path and functions.

Must have experience using Patran and Nastran.

Must have working knowledge of Catia V5, finite element modeling and analysis is an asset.

Must be computer literate and familiar with commonly used software ( MS Office )
 
Job Number: 2183
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2193 - HYDRO-MECHANICAL SYSTEMS ENGINEER - word doc only

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems

Coordinate product development activities between the supplier of the system and the affected work packages

Ensure successful design, validation, certification and delivery of the system

Ensure successful completion of each development phase deliverables (may author, review, approve)

Problem solve the technical issues in a cross functional environment

Be involved in the design and integration of the system

Review the design and documentation of all the aspects related to your system

Check for quality of the Supplier's analyses

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing

Define, prepare and execute qualification and certification tests

Work with supplier in the investigation and resolution of test findings

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years

Background in design, integration, development and certification of Hydro-Mechanical Systems

Knowledgeable of the relevant Airworthiness Regulations and certification process

Good oral and technical writing skills in English (required)

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers

Dynamic person with initiative, a strong sense of responsibility and good judgment

Knowledge of MS Office software (essential)

English - French working knowledge an asset
 
Job Number: 2193
Job Location: Montreal, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 07/18/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2196 - RM&S ENGINEER - resume word doc only please.

Description:
Be part of the Client R,M&S team, for the Client aircraft, and the primary tasks are to conduct aircraft safety and/or system safety activities, and to support all design activities.

Be responsible for RM&S deliverables specific to the assigned systems.

Participate in the, system functional hazard analysis, aircraft and system fault tree analysis, system safety assessment, failure mode and effect analysis and the final R,M&S certification report.

The duties will also require certification activities. This will involve co-ordination of technical issues and resolutions across all Client, Partner/Supplier, Regulatory and Customer parties.

University graduate in electrical/mechanical engineering with at least 15 years R,M&S experience.

Have a strong electro-mechanical background and has an excellent understanding of aircraft performance characteristics, aircraft systems definition, integration, interfaces, component qualification, reliability and safety requirements and certification process of flight controls systems.

Preferably have been directly involved in the aircraft definition and certification.

Must be very cognizant of the relevant Airworthiness Regulations and certification process.

Have the ability to communicate sound technical proposals and work status to senior management, be a team player, a self-motivated person and be able to work under pressure.

Possess a strong sense of responsibility and integrity.

Have good oral and technical writing skills in English are required (French is an asset).

Possess basic knowledge of MS Office.

Knowledge of creating Failure Mode Effect Analysis (FMEA), Fault Tree Analysis (FTA) and Safety Analysis is required.

Aircraft Level System Safety, preferably in Hydro-Mechanical but could also be Electrical Avionics.

Must have Aircraft Level Knowledge of the following:
In-depth aircraft level understanding FMEA - Failure mode and effects analysis
FTA - Fault Tree Analysis, CMA - Common Mode Assessment
CCMR Process - Candidate Certification Maintenance requirement
25.1309 Regulation
ARP4761 Safety process

Software Skills:
CAFTA required
Must be proficient with Excel
MS Access database development would be asset
Microsoft Office Suite
CATIA would be an asset
 
Job Number: 2196
Job Location: Montreal, Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2212 - MANUFACTURING ENGINEER - word doc only

Description:
Administer and manage the budget estimates, schedules, planning, coordination and communication on all project stages

Prepare and lead workshops with multidisciplinary team

Write tenders and identify selected suppliers for the award of contract

Coordinate multidisciplinary resources involved in the project

Maintain and communicate effective project visibility through governance

Ensure compliance with deliverables (costs, deadlines and quality)

Identify, manage risks and assist in solving problems and obstacles associated to the project

Document success and opportunities

Provide feedback (post-mortem) on the project to main stakeholders

Participate in the improvement of the existing processes


Engineering degree or technical degree

Five to ten (5 - 10) years of experience in project management.

You master Catia V5 & MS Project Systems

Good knowledge manufacturing processes utilized in the aerospace industry

Organizational, leadership, teamwork and mobilization skills

Experience in project management

Good command of the software used for project management

Able to work under pressure and meet deadlines

Bilingual with good abilities for oral and written communication

Work under minimum supervision

Logical mindset, resourcefulness, detail oriented, rigor and discipline

Have analytical skills and ability to see the overall picture

French - English working knowledge an asset
 
Job Number: 2212
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 07/24/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2215 - DESIGNER & STRESS ANALYST - cv - word doc only

Description:
Preliminary and detailed sizings.

Stress analyses to ensure requirements (strength, fatigue, damage tolerance, weights, customers) are met.

Validation of engineering drawings and IPDT support.

Preparation of certification reports and support to entry-into-service.


University mechanical or civil or aerospace engineering degree with a minimum of 5 years relevant experience.

Your experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Knowledge of CATIA, finite element modeling and analysis is an asset. General computer skills are essential.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Must be able to read and write in English and have good communication skills. Being completely bilingual (French and English) is an asset.

Must have experience in Primary and Secondary Aircraft Structures.

Must have experience with Mechanical systems and systems installations.

Must have experience in design and creation of MBD and 2D drawings of detail parts (machined parts, sheet metal), assemblies and installation drawings in CATIA V5.

Must have working knowledge of CATIA V5 (minimum 2000H experience).

Must have the ability to understand complex engineering issues.

Basic knowledge required :
- 3D and MBD creation in CATIA V5
-GD&T and technical drawings
-Certification rules
-Manufacturing requirements

Must be computer literate and familiar with commonly used software ( MS Office )
 
Job Number: 2215
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/30/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
9 Mechanical Systems Design - Active Sceret Clearance

Description:
Active Secret Clearance Required (background investigation has to have been completed or updated within the last 5 years).
Experience with all type of aircraft systems design including, flight controls, ECS, fuel systems, wire routing, etc.  Must also have experience with UG (NX+), as well as Catia V5.  Apply knowledge of engineering principles and techniques to the design and development of mechanical or electrical operating systems. Ability to evaluate designs and perform trade studies for performance, functional adequacy, cost effectiveness, and regulatory compliance. Ability to develop specifications and oversee supplier hardware development, test, and certification programs. Knowledge of thermal analysis, stress analysis, material selection, packaging methods, routings and installation in aircraft environments. Knowledge of drafting and dimensioning fundamentals. Knowledge of three dimensional CAD software for development of details, assemblies, and installation drawings. Areas of expertise may include design of hydraulics, pneumatics, miscellaneous fluid systems, mechanisms, wire harness, and electrical equipment installation.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Wichita, KS
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 07/11/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Administrative Assistant

Description:
We are looking for an Administrative Assistant to work in our Recruiting / Sales Office in Lakeville, MA. This is a full-time position Monday thru Friday from 9:00 – 5:00. In addition to the general duties listed below, the Administrative Assistant will be asked to be the liaison to our Payroll and Finance Department located at our Corporate Office in Portland, ME.

Responsibilities:

The Administrative Assistant will manage the administrative day-to-day activities including, but not limited to:
* Answers, screens, and directs incoming telephone calls.
* Responds to routine and non-routine inquiries as appropriate.
* Schedules appointments, assists with travel plans, arranges meetings, and prepares required materials. May attend meetings and record and report on proceedings if necessary.
* Provide support to Salesman and Recruiters, as requested, and handle office issues as required. This also includes daily communication with Corporate Payroll and Finance Departments.
* Prepare and maintain reports, spreadsheets, data bases, and/or other software files and information.
* Organizes and maintains office and client files
* Opens, reviews and distributes incoming mail; also may prepare and ship outgoing mail or documents
* Perform all other position related duties as assigned or requested.

Experience / Skills:

* 1-3+ years’ experience of related work experience
* HS Diploma a must
* Must have a reliable vehicle for transportation
* Strong MS Word, Excel and general internet skills
* Strong attention to detail; excellent data entry and organizational skills
* Strong written and verbal communication skills
* Ability to work independently with minimum supervision

Preferred:

* Experience in a Recruiting / Sales environment within the Administrative Assistant field
* Experience recording and calculating commissions via Excel
* Associate’s / Bachelor’s degree in Human Resources or a related field


Mark A Ludwig
Vice President of Sales
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 - 6180
Toll Free: (800) 510 - 8050 x123
Fax: (508) 923 - 0005
www.globalamericanstaffing.com
 
Job Number: Admin
Job Location: Lakeville, MA
Rate: Open
Per Diem: N/A
Overtime: N/A
Duration: Perm Hire
Start Date: Feb 13 - Mar 13
Input Date: 09/14/2017
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Administrative Assistants - San Antonio, TX

Description:
STS AeroStaff Services is currently hiring Administrative Assistants for open positions in San Antonio, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.
Job Duties:
• Provides friendly service to and maintains positive relationships with all internal and external Customers
• Works in a cooperative spirit to ensure the success of our Company
• Performs secretarial and administrative duties for Leadership and staff under minimal supervision
• Answers calls, relays and takes messages, transfers calls, provides assistance to callers, screens calls and places calls for management
• Maintains department personnel files and paperwork
• Organizes and maintains payroll file room and coordination of timely rotation of files to off-site storage facility
• Orders supplies using established Company vendors and ordering methods
• Opens, sorts, screens and responds to incoming mail
• Composes, types and edits correspondence
• Compiles data and prepares special reports; gathers and summarizes data
• Makes arrangements for meetings and luncheons as directed by the department Leadership Team
• Maintains appointment calendars for management
• Arranges travel and accommodations for management and staff
• Establishes meeting times, secures location and contacts attendees
• Establishes and maintains files and other information for reference and control purposes
• Prepares confidential paperwork regarding performance appraisals, promotions and other people-related issues for management
• Maintains invoice and budget files and assists in the compilation of variance reports
• Operates computer equipment utilizing word processing, spreadsheet, data base management and presentation software
• Some data entry may be required
• Operates copy machine, FAX equipment and other standard office equipment
• May perform other job duties as directed by Leadership
• Must be able to meet any physical ability requirements listed on this description
• May perform other job duties as directed by Employee's Leaders
Qualifications:
• High School diploma or equivalency required
• Previous analytical/technical experience preferred
• Must provide friendly service to and maintains positive relationships with all internal and external Customers
• Operation of multi-line telephone with courtesy and sufficient speed
• Ability to operation copy machine, FAX machine and other standard office equipment
• Open, sort and screen incoming mail
• Must master computer software applications such as Outlook, Quickbase, Microsoft Word, Excel, PowerPoint and Access
• Must have sufficient ability to handle and resolve office administration tasks
• Must be able to perform mathematical computations
• Must possess excellent organization skills including establishing and maintaining files for reference and control purposes
• Must work under tight time constraints including meeting unforeseen deadlines to accomplish assignments and projects
• Must be able to effectively communicate verbally, by telephone and face to face
• Must have ability to keyboard with sufficient speed and accuracy to meet the demands of the job
• Must be able to read documents, follow instructions, learn and understand office procedures
• Must compile data and prepare special reports
• Responsible for making arrangements for meetings and luncheons and handle travel arrangements as necessary
• Responsible for the payroll records for the entire Department, including Incentive Passes
• Must have ability or must gain ability to use SWEEP for ordering department supplies
• Must be able to work varying schedules and work weekends as required
• Must be able to work occasional overtime, as necessary
• Must be able to comply with Company attendance standards as described in established guidelines
• Must meet confidentiality expectations as to confidential, proprietary and sensitive Company information
• Must maintain a well-groomed appearance per Company appearance standards as described in established guidelines
• Must be a U.S. citizen or have authorization to work in the United States as defined by the Immigration Reform Act of 1986
Benefits:
STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.
We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.
Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38673
Job Location: San Antonio, TX
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 06/12/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace CMM Inspectors - Hawthorne, CA

Description:
STS AeroStaff Services is currently hiring Aerospace CMM Inspectors for open positions in Hawthorne, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Surface plate work/inspection
• Inspect supplied product according to the applicable drawing and or work order specifications to verify that it conforms to all design requirements
• Perform repetitive inspection following standardized methods
• Perform receiving inspections, first article inspections, and production inspections
• In-Process Inspection: Visual and/or dimensional inspection of precision machined and sheet metal parts
• Interact proactively with other departments to improve products and reduce cost
• Communicate help resolve quality related issues as they relate to the shops production and Document production non-conformances in accordance with prescribed procedures and processes as required
• Support Quality Management System policies and procedure documentation, assess compliance to company and industry standards, initiate and lead continual improvement and Lean Manufacturing initiatives
• Work in a cross functional environment utilizing PC-DMIS programming skills as applied to an Articulating Romer ARM and CMMs
• Create, maintain and verify CMM programs used for the measurements of manufactured and supplied parts
• Performs documentation review and verification of certifications, specifications, and conformance to design and specification requirements

Basic Qualifications:

• Must be a U.S. Citizen
• High school diploma or GED is required
• Must be knowledgeable of sheet metal fabrication process
• Experienced with the inspection of sheet metal parts
• Able to read and interpret various mechanical drawings and blueprints
• Ability to utilize hand tools for inspection, i.e. micrometers, calipers, scales, gauges and height gauges
• Clear understanding of document control processes
• Ability to relate and interact with staff at all levels of the organization
• Works independently and is self-directed
• Experience with GD&T is desired
• Able to multi-task between production checks and FAIs
• Minimum of 3 years’ of precision mechanical inspection experience required
• Minimum of 3 years of CMM or ROMER/Faro Arm experience required
• At least 3 years’ of practical experience in a launch vehicle/spacecraft hardware integration environment
• Must be able to read and interpret design drawings and CAD models

Preferred Skills and Experience:

• Aerospace precision inspection experience
• ISO 9001 / AS9100 experience
• CMM experience with PC-DMIS software experience
• NC inspection experience with PC-DMIS NC/ CAPPS NC
• Romer Arm experience with Verisurf/ PCDMIS software
• Solid computer skills in Microsoft Word, Outlook and Excel
• DCC (Direct Computer Control) experience
• Statistical process controls experience a plus
• Ability to detect design and drawing flaws
• Ability to read and interpret engineering drawings and specification using ASME Y14.5
• GD&T and skillful use of metrology tools and gauges
• Example: Thread gauge, profilometer, height gauge, calipers, micrometers, etc.

Additional Requirements:

• Must be able to lift up to 25lbs. unassisted
• Must be able to work either 1st Shift (5:00am-3:30pm) or 2nd shift hours (3:30pm-2:00am) based on staffing needs, and overtime as needed
• Must be able to stand for extended periods – 8 hours min
• Must be able to work all shift hours, able to work overtime and weekend as needed

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38989
Job Location: Hawthorne, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 06/13/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Design Engineer

Description:
Role:Aerospace Design Engineer

Location:Colorado Springs, CO

Duartion:6 months+

BS or MS Aerospace, Mechanical, or Metallurgical Engineering Degree, Minimum 3.0/4.0 GPA

A minimum of 4 years of engineering experience in designing mechanical products (preferably aerospace).
•Knowledge of FAA/ aerospace requirements
•Strong interpersonal skills and skills facilitating working in a teamwork environment
•3D CAD experience with high end CAD software (preferably Unigraphics NX)
•Strong experience in using Excel based tools for weight or other analysis.
•Experience in working with PLM systems (preferably Teamcenter)
•Experience in developing/ using weight management tools/ systems preferred.
 
Job Number: 51829
Job Location: Colorado Springs, CO
Input Date: 06/13/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bala
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer

Description:
Perform spacecraft attitude control systems analysis, test, design and/or development. Run detailed spacecraft simulations using in house simulations. Design spacecraft attitude and orbit determination and control loops using MATLAB. Design various Guidance, Navigation and control algorithms using various tools, including MATLAB and C/C++ compilers. Develop subsystem specifications, develop GNC Flight software, test GNC FSW. Develop and test operations scripts. Enhance or extend simulator capabilities. Document results and create presentation materials.

Qualifications: Top Secret/SCI Clearance REQUIRED UP FRONT.
A Bachelors Degree (BA/BS) in Computer Science, Engineering, Math, Physics.
Four years of related experience is required. Experience designing and/or analyzing spacecraft Guidance Navigation & Control subsystems.
Expertise with using MATLAB.
Experience with coding in C or C++.
MS is preferred with 2-3 years spacecraft attitude control design experience.
 
Job Number: 57448364 AG
Job Location: Dulles, VA
Rate: 51/hr DOE
Per Diem: Split
Overtime: Maybe
Duration: 6-12 months
Start Date: ASAP
Input Date: 06/07/2017
Firm Name: ENTEGEE ENGINEERING TECHNICAL GROUP
Attention: Andy
Address: 5620 INTERNATIONAL PKWY
City, State: NEW HOPE, MN 55428-3047
Phone: 763/577-9000
Fax Phone: 763/577-9010
Website: www.entegee.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Applications Engineer - Level 3

Description:
Applications Engineer - Level 3

Location: Lexington, KY
Pay Rate: DOE ($55/hr - $65/hr)
Duration: 1 year contract
Shift: First, 5/40, exempt
**MUST be eligible to obtain a DoD SECRET CLEARANCE**
**MUST be a U.S. CITIZEN**

Description
-This is an early to mid career position (5 to 10 years experience) for a Product Lifecycle Management (PLM) software administrator.
-The PLM Admin will be responsible for managing the daily operations and milestone events (e.g. upgrades) for the PLM software (Teamcenter) at the Special Operations Forces Support Activity (SOFSA) contract in Lexington, Kentucky.
-She / he will be part of the IT department and will work with the user community (primarily production engineering) to ensure the software meets the needs of the contract.
-This includes, but is not limited to, configuration settings, and workflow / report design and support.
-Gathers information concerning the capabilities of company products;
-Investigates the technical capabilities of company products and competing equipment;
-Stays abreast of developments in hardware and software;
-Analyzes customer problems; assists in designing systems to satisfy customer needs.
-Prepares equipment analysis to instruct sales force and customers in equipment capabilities.
-May prepare and present sales proposals.

Skill/Experience/Education (MANDATORY):
-PLM Experience: (4-5 years required)
-Application Administration (Server Side): (4-5 years required)
-CompTIA Security+ certification (required)

Desired:
-Teamcenter (Engineering or Unified)
-PLM data modeling experience
-Experience working with a Linux interface
-Experience writing custom handlers or extension rules
-Customer service experience working directly with users to answer questions and troubleshoot issues

Applicant Questions:
1) How many years of PLM Administration do you have?
2) What PLM software have you worked with?
 
Job Number: 7480
Job Location: Lexington, KY
Rate: 55-65
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/26/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Assistant-Network - II

Description:
PDS Tech is seeking a candidate for the Assistant Network II position located in Westlake, TX.  
Assistant Network is responsible for providing support to the network New Build Real Estate Site Acquisition team.
All of the job functions support new build site acquisition team, the specific tasks include receiving invoices for payment for site acquisition services for new build real estate sites, creating purchase orders, maintaining records for new build cell sites, maintaining site list and contact numbers for work groups, and providing updates as required.
May also be responsible for providing the highest possible quality and reliability in both clerical and technical areas, including interfacing with various departments such as: Legal, Environmental, Accounts Payable, Purchasing, IT etc.
Minimum AA degree or equivalent.
Must be highly proficient utilizing Microsoft Windows, Excel, Word, PowerPoint, related Windows-based software and Siterra and/or Site Tracker data bases a plus.
Must be able to work as part of a support staff in a technical office environment.
Must have the ability to support a group of 20 plus.
Knowledge of PeopleSoft (Purchasing System) i.e., creation of purchase orders.
Ability to multitask and prioritize the assignments as and when required.
5 to 7 years of experience.

 
Job Number: 1710066653
Job Location: Roanoke, TX
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jan Manalaysay
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021k0cAAA&URLSource=cjhunter

Automation Software Developers

Description:
OOP-object oriented programming, high speed
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: ccastro@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Automotive Overhead Systems Engineer

Description:
If Interested then please send resume at ravi@iconma.com or call me back at 804-915-6529.

This is an overhead systems engineer position for current product MDX, Pilot, Ridgeline and Mercedes programs in the Honda Business Unit reporting directly to the project engineering manager/chief engineer. The engineer will be responsible for the design, development, and integration of overhead system in support of customer requirements. This includes supporting the overhead systems design and directly interfacing with the customer and providing engineering direction during design reviews with Manufacturing, Purchasing, and Quality divisions within company, customer, and suppliers. The overhead systems engineer will oversee integration of design development including all support groups, analyze requirements, and develop resolutions.

Job Qualifications:
- Willingness to travel to customer facility (Mid-Ohio) and suppliers and JIT plant (Alabama)
- Understanding of overhead systems design integration of fabric plastics, structures, wiring, etc.
- Mechanical aptitude for problem solving using tools such as KT, A3, FTA, 8D, etc
- Basic computer skills (Windows, MS Office, etc.) and ability to learn/apply Adient-specific software (eg, PLM, EPIC, GLIMS, etc.)
- Understanding of basic GD&T and ability to facilitate/develop and implement on drawings
- Ability to conduct statistical analysis of data (performance/supplier dimensional data) and interpret data to understand trends.
- Catia V5 2D drawing and layout creation & 3D design
- Strong verbal and written communication skills with the ability to effectively, visually, and succinctly summarize and deliver information to the appropriate groups - Ability to plan and prioritize workload effectively – create personal tactical timing plans and manage internal/external workload accordingly
- Possess ability to engage and interact with a diverse team across cultures in a global environment
- Ability to develop and maintain positive and productive professional relationships with Internal (ex: BU Eng, Mfg., etc.) and External (OEM) customers.

Experience Required:
- 3+ years in overhead systems design engineering. Previous experience working with or supporting
Honda R&D and Mercedes strongly desired.
- Bachelor's degree in engineering required.
- 3-5 years of experience in Overhead systems designing.
 
Job Number: 17-08552
Job Location: Plymouth, MI
Duration: 6 months
Start Date: ASAP
Input Date: 06/19/2017
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Parts Purchasers - Addison, TX

Description:
STS AeroStaff Services is currently hiring Aviation Parts Purchasers for open positions in Addison, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Source and select suppliers, negotiate pricing, award contracts for purchase of aviation parts
• Ensure all paperwork is completed accurately and efficiently, and all order statuses are updated daily
• Prepare purchase order / sales order packets for Purchasing Manager
• Inspect and correctly identify incoming parts, ensuring correct certification accompanies parts being received
• Ensure proper identification and organization of inventories, keeping inventories at acceptable levels to support fleet
• Ensure materials are properly issued to specific aircraft for work in progress and to shop for component rebuilds
• Approve/Authorize payment of invoices for parts
• Maintain storage areas in a clean and orderly manner; recommending improvements to make areas safer
• Verifies all packing slips against purchase orders and forward to A/P
• Interfaces directly with A/P where price discrepancies exist between the purchase order and invoice
• Reports all major or consistent price discrepancies to the Warehouse Manager
• Assists Warehouse Manager with solicitation of bids, review of pertinent data and negotiations
• Interfaces directly with department managers in relation to procurement to establish needs
• Communicates with all departments in relation to requisitions and orders that are in progress
• Perform other related duties and assignments as required

Skills & Qualifications:

• Minimum 3 years’ of experience in purchasing
• Experience in an aviation purchasing is preferred
• 2+ years’ processing inventory
• 2+ years’ with current software packages such as Microsoft Word and Excel
• Excellent attention to detail, must maintain discretion when working with confidential information, and have the ability to recognize errors and make corrections

Education & Experience:

• A&P License
• 3+ years’ experience in heavy line maintenance of transport category aircraft, preferably DC-9/MD-80 series
• Familiarity with FAA 121/145 regulations

Physical Requirements/Working Conditions:

• Prolonged sitting at personal computer
• Prolonged exposure to outdoor environment: heat, humidity, cold, damp
• Prolonged use of telephone
• Frequent bending, twisting, stooping, pushing and pulling equipment and/or parts
• Prolonged standing and kneeling in awkward positions
• Ability to lift up to 70 pounds overhead
• Flexible, irregular schedule
• Travel as necessary (about 20% of time)

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38904
Job Location: Addison, TX
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 06/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Software Integration Engineer

Description:
Job Description
Design/develop simulation software and test scripts from software requirements to support testing of air monitoring software for space applications. The software will use communication interfaces such as RS-232, RS-422, MIL-STD-1553B, and Ethernet.
Support software verification and validation testing including developing and/or running qualification test procedures

Experience developing software in a Windows environment using Microsoft Visual Studio C/C++ or C# I/O board experience. Experience with a scripting language such a Python or Perl . Experience using MS Office for documentation (Word, Excel, PowerPoint) BS or MS in Computer Science or related discipline. Excellent verbal and written communication skills
 
Job Number: CA7725
Job Location: Pomona, CA
Rate: 53.00
Per Diem: Possible
Overtime: Possible
Duration: 9 months
Input Date: 06/07/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist

Description:
CNC Machinists/Programmers - 5 Axis
Wheeling, IL

Contract to Hire

Must be familiar with Fanuc controls. Seeking Aerospace Industry experience.

MUST be willing and able to work this shift: 6PM-6AM (4 days on, 3 days off, 3 days on, 4 days off)

Our client is looking for operators, machinists and programmers available for basic setup through complete processing of advanced components for CNC turning/CNC milling machines - utilizing metal machining knowledge to set-up and develop machine processes as well as operate a variety of CNC machines to produce high-precision machined parts.


Positions involve:

Accurate record keeping.
Able to read and interpret drawings and work instructions.
Proper inspection of first-run and in-process parts.
Safe operation of CNC machinery.
Ability to set-up and machine components.
Ability to create and edit programs on Mastercam and Unigraphics NX software.
Ability to keep a safe and clean working environment.

Requirements:

2.5-5 years experience in programming, editing, set-ups and operating of CNC machines for precision parts.
Read and understand GCode/measuring equipment.
Interpret drawings with complex GD&T symbols.
Manual agility.
Experience with:
CNC mills - 3 to 5 axis.
CNC lathes with live tooling.
Fanuc and/or Heidenhain controls.
For Programmers:
Mastercam programming and/or Unigraphics NX software experience.
Experience with limited dimension drawings and solid models
 
Job Number: 51271
Job Location: Wheeling, IL
Duration: LT
Start Date: ASAP
Input Date: 06/09/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer with Lathes experience

Description:
PDS Tech, Inc. is seeking a Numerical Control Programmer 3 for an open position in Portland, OR.
In your role, you will: Provides numerical control, machining and programming technical experience. Establishes technical requirements for manufacturing and producibility.
Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for a complete spectrum of numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction.
 
Job Number: 1710069315
Job Location: Portland, ORE
Rate: TBD
Per Diem: Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 06/19/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Recruiter
Address: 12720 GATEWAY DR S STE 102
City, State: TUKWILA, WA 98168-3333
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cert Project Specialist I

Description:
Unique Skills:

Previous experience supporting FAA/Gulfstream ODA certification projects. (For example STC/MRA/TC projects)

Position Purpose:

Under general supervision, performs a variety of engineering tasks associated with ODA (Organization Delegation Authorization), FAA (Federal Aviation Administration), EASA (European Aviation Safety Agency) and/or other FCAA (Foreign Civil Aviation Authorities) certification projects. Primary responsibilities include the gathering, organizing, generating, reviewing and processing of engineering documentation associated with MRA (Major Repairs and Alterations), STC (Supplemental Type Certificate), Type Certificate (TC) and/or other regulatory approvals projects.

Principal Duties and Responsibilities:

Essential Functions: 1. Reviews STC/TC/MRA data packages prior to submission to the FAA for completeness and adherence to the established requirements. Makes recommendations to ensure STC/TC/MRA documentation is prepared in accordance with approved procedures. 2. Gathers, organizes, and processes engineering documentation related to STC/TC/MRA projects. 3. Exercises creativity and initiative in processing, handling, and distributing engineering documentation to both internal and external organizations. 4. Participates on work teams to achieve department goals, complete milestones and improve processes. 5. Tracks STC/TC/MRA projects to ensure completion within the required timeframe. 6. Assists FAA Designees in STC/TC/MRA project development, as described by Gulfstream ODA Operations Manual procedures. 7. Develops and broadens skills for competency enhancement and career progression.

Additional Functions: 1. Performs other duties as assigned. 2. Minimum travel required.

Other Requirements: 1. Good working knowledge of MS Office software. 2. Must be familiar with Federal Aviation Administration (FAA) certification processes. 3. Must be familiar with Federal Aviation Regulations (14 CFR Part 21, 23, 25, 43, 91, 135 and 183) and associated guidance material. 4. Must possess excellent attention to detail and display the ability to effectively adjust to changing engineering practices and procedures. 5. Must have excellent organizational and planning skills.
 
Job Number: 17-680-100081
Job Location: Southeast
Rate: $61.00 to $68.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/13/2017
Firm Name: AGENTE TECHNICAL
Attention: Alrxa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chief Aviation Inspectors - Elk Grove Village, IL

Description:
STS AeroStaff Services is currently hiring Chief Aviation Inspectors for open positions in Elk Grove Village, Illinois.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Purpose:

To ensure the repair stations operations are conducted in accordance with the pertinent FAA Regulations, client’s Quality Manual/Procedures, Customer Air Carrier Requirements and is designated with final airworthiness determination.

Job Duties:

• The Chief Inspector will have the final airworthiness authority for the release, as airworthy, of the units the repair station is rated to repair and maintain
• Responsible for ensuring all articles delivered to and maintained by the repair station are properly recorded and staged from receipt to delivery in their airworthy/serviceable condition
• Managing and delegating to the repair stations inspection staff ensuring the quality and production needs are maintained
• Perform, and have oversight of inspection personnel/activity, including Preliminary, Hidden Damage, In-Progress and Final inspections/RTS of aircraft articles processed by the Repair Station and assuring proper recording of results
• Ensure compliance with pertinent FAA regulations, manufacturer’s technical data/approved supplements, RSM/QCM and customer requirements
• Report all quality related issues to the QA Manager as soon as the Facility Manager is advised and ensure corrective actions are implemented
• Confirm that all equipment being maintained by the repair station is on the Capabilities List, the proper data is available and in use, the staff is properly trained and all records of work/release are complete/accurate
• Perform duties delegated by Quality Assurance Manager
• Directly responsible for the compliance with the FAA Approved training program manual; including indoctrination, initial, recurrent, ongoing, semi-annual, and specialized training
• Ensure any applicable Airworthiness Directive are posted and are being used and verify compliance with all other supplements, approvals, requirements
• Submit reports of defect or un-airworthy condition to the “Service Difficulty Reports”
• Assume all duties and responsibilities detailed in the RSQCM to include; calibration program, shelf life program, internal auditing, BER/scrap, work turn over, suspected unapproved parts, salvage parts program and incoming goods
• Performing semi-annual internal audit of the repair station and any approved contractors
• Coordinate with station manager inspection requirements
• Ensure and assist in all areas of the Safety Program and Zero Harm Program to ensure that they are fully enforced and by all client employees
• Provide feedback/suggestion to improve customer satisfaction
• Communicate with customers and regulatory agencies during audits or visits
• Ensure system security of our FAA approved electronic recordkeeping system regarding their area/s of responsibility
• Maintain safe and clean work environment
• Overseeing the quality of products in accordance with monthly budgeted production goals
• Maintaining quality standard in accordance with the regulations, customer requirements and internal procedure
• Establishing a quality and compliance system which will result in no major audit finding;
• Equipment rejection rates shall be at 98% or higher
• Maintaining positive MTTR
• Contributing to positive MOP by controlling wastes
• Enforcing the client Zero Harm Culture and goals

Qualifications:

• 2+ years’ experience as a lead inspector or manager in related aviation field
• 5 years’ aviation related industry experience
• Confident personality with the ability to interface/communicate with the authorities and customers
• Experience in performing Audits
• Strong knowledge of FAA regulations and Part 145 requirements
• Competent in reading and interpreting manuals, drawings, policies
• Good communication and punctuation skills
• Computer literacy and familiar with Microsoft office
• Ability to learn new software programs and systems
• Appropriately certificated under Part 65 (A&P or FAA Repairman)
• Ability to work in a high activity/fast paced environment while managing associated stress
• Possesses excellent organizational skills and ability to work independently
• Organize responsibilities of the inspection staff and delegate duties to properly qualified inspection personnel
• Effectively execute training in accordance with the Approved Training Program and internal requirements
• Ability to make quality decisions and effectively solve problems
• Strong verbal and written communication skills, including the ability to facilitate meetings and effectively lead groups
• Ability to build and maintain effective working relationships with all levels of management and staff
• Ability to lift, pull, and push in excess of 65 lbs
• Must be able to read, write and understand the English language
• Part 65 A&P or Repairman Certificate

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38651
Job Location: Elk Grove Village, IL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 06/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Computer Software Engineers

Description:
Hiring in multiple locations

Email your resume or apply online

Benefits Available
- long term contracts
- top per diem rates
- direct deposit
- referral bonuses
- 401(k) program
 
Input Date: 05/09/2017
Firm Name: NESC STAFFING
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
800 Phone: 800/562-3463
Email: lokeefe@nesc.com
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Engine/APU, ECS, Fuel Systems Engineer

Description:
Unique Skills:

Required Experience in the following: • System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing • Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings • Software Certification: Experience reviewing PSAC, CIA, SAS. Experience in software V&V Required Experience in the following: • Engine Systems (FADEC) • Environmental Control Systems • APU systems • Fuel systems (Distribution and Indication) Desired Experience in the following: • Working Knowledge ARP4754 and CFR 25 • Exposure to Part 33 certification • Project Management Skills/Experience: • Configuration change management
 
Job Number: 98102
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 06/09/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: SUITE 200
5051 PEACHTREE CORNERS CIR

City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Simulation & Software Engineering Contractor

Description:
Unique Skills:
1. Matlab/Simulink experience modeling real time aircraft systems 2. Aerospace background with avionics lab testing experience 3. Ability to understand aircraft electrical wiring diagrams as it relates to HIL simulation 4. Experience with high level programming or scripting language such as C/C++, Python 5. Knowledge of data protocols used in aerospace 6. Experience modeling aircraft systems in real time on industry standard simulation platforms (eg NI, Speedgoat, Dspace,ADI) 7. Flight and/or aircraft system lab HIL simulation experience 8. Ability to work independently and self-govern priorities in accordance with lab customer needs ob Description Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 92762
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 06/09/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: SUITE 200
5051 PEACHTREE CORNERS CIR

City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Engineer

Description:
Duties involve contributing to machine concepts, design of control software, integration of software with electrical and mechanical systems, process development and machine installation at customer sites worldwide. Programming and integration assignments involve leading-edge technologies and processes utilizing PLC’s, PC’s, robotics, motion controllers, vision systems, laser and other controllers.

Responsibilities

Design, program and debug control systems for assembly and test equipment

Modify/retrofit existing systems

Communicate and interact with customers and suppliers

Manage projects within cost and time constraints

Communicate to Lead CE

Requirements

Minimum 4 years’ experience with machine controls

Strong knowledge of PLC’s (AB a must, prefer a combination of AB & Siemens)

Knowledge of Robotics and motion control a plus

Experience with HMI’s

Experience with AutoCAD preferred
 
Job Location: Chicago, IL
Rate: Open
Per Diem: Possible
Overtime: Yes
Duration: 3-12 mos.
Start Date: ASAP
Input Date: 06/12/2017
Firm Name: STERLING ENGINEERING
Attention: Gina McDermott
Address: 2 WESTBROOK CORP CTR STE 300
City, State: WESTCHESTER, IL 60154-5721
Phone: 630/993-3433
800 Phone: 866/478-3754
Fax Phone: 630/516-1192
Website: www.sterling-engineering.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Customer Relations Specialist

Description:
Customer Relations Specialist

Location: Ridley Park, PA
Duration: 3 Months

Description:
The Global Sales & Marketing Customer Engagement (CE) function is responsible for delivering unparalleled customer experiences that strengthen relationships, enhance business growth and advance the global brand of The client Company.
As a member of the BDS Customer Engagement team, you will provide leadership and support in strategic event planning and marketing support to various BDS programs, both domestic and international. The position is focused on providing support to the client Military Aircraft (BMA) and Vertical Lift business units of BDS as well as to research-and-development programs and site, community, local government, and supplier activities.

Candidate will report to the Manager-Customer Engagement for client Defense, Space, and Security located in St. Louis, MO. The role requires the planning, coordination and execution of complex customer visits, special events, conferences, product demonstrations, site tours, and sponsored functions for U.S. Department of Defense and international customers, as well as senior client and industry partner executives.

Candidate will be required to lead or assist with customer engagements, manage vendors, prepare and deliver executive event briefs, and assess event effectiveness at the local client site and other venues. The job entails the use of event planning and project management skills, marketing tactics, clear understanding of customer requirements, a substantial working knowledge of U.S. and foreign government regulations, familiarity with international cultures and customs, and strict adherence to company guidelines, policies, and procedures. You will continuously collect, integrate and disseminate information to all stakeholders to ensure execution to the plan. In addition, you will utilize event management tools and data to capture and closeout event reports.

Demonstrated leadership, event project management, strategy, marketing, communications and teambuilding skills are key to this role. Other essential skills and competencies are business knowledge, flexibility, attention to detail, decisiveness, forward thinking and a positive approach to change and innovation. The role requires the ability to manage multiple projects simultaneously with minimal supervision, meet deadlines and event budget targets, create and maintain effective working relationships and customer partnerships.

Education / Experience:
Bachelor's and typically 6 or more years' related work experience, a Master's degree and typically 4 or more years' related work experience or an equivalent combination of education and experience.

Skill Code:
K03-Customer Relations Mgt
Category Name Required

Areas of Expertise Project Management Yes


Soft Skills Oral and Written Communication Skills Yes


Software Skills MS Office Yes
 
Job Number: 17-10132
Job Location: Ridley Park, PA
Per Diem: possible
Overtime: possible
Duration: 3-6 mos
Start Date: 6/23/17
Input Date: 06/15/2017
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

Electrical CAD Designer/Drafter

Description:
Overview:
  • Develop system designs and create construction documents for electrical projects using AutoCAD/AutoCAD Electrical.
  • MicroStation would be a plus
  • Work may include single line diagrams, schematics, interconnect diagrams, panel layouts, bill of materials, conduit and cable tray layouts/schedules/fill calculations, and cable and wire interconnection reports.
  • Create drawings for electrical enclosures, equipment, instruments, and installations details.    
  • Complete electrical drawings package under direction from electrical engineering group.

  • Must have strong knowledge and skill with AutoCAD Electrical software.
  • Minimum 3 years AutoCAD drafting experience.
  • MicroStation would be a plus
  • Clear understanding of electrical engineering terminology, codes, and drafting techniques.
  • Familiar with construction processes.
  • Associates Degree in engineering drafting/design or related field.
  • Ability to analyze problems and develop solutions.
  • Ability to clearly communicate technical/non-technical aspects of engineering and construction projects.

 
Job Number: 1710064163
Job Location: Green Bay, WI
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Sue Van Pay
Address: 110 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 920/499-9943
800 Phone: 800/333-1389
Fax Phone: 920/499-9067
Email: cecjgreenbay@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GLU5AAO&URLSource=cjhunter

Electrical Engineer

Description:

PDS Tech, Inc. is seeking an Electrical Engineer for a position located in Kansas City, MO. 
Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

The Client's organization has several open opportunities for Electrical Engineers.  We are seeking engineers who are interested in supporting one or more of the following areas:  electrical and/or electronic components and major assemblies; discrete and custom devices; complex cables; RF/radar/antenna devices and components; test equipment hardware and/or software; test & controls; purchased and COTS products; control account management.

  • Performs project planning and manages project resources, including multiple individuals and disciplines, to achieve quality, delivery, and cost objectives.
  • Conducts research and development experiments to resolve complex engineering and quality problems involving highly technical, scientific methods.
  • Writes technical reports on results and conclusions drawn from experiments conducted and incorporates findings in formal specifications.
  • Translates design agency concepts into production items by coordinating the activities of engineering, quality, manufacturing, and related organizations.
  • Estimates set-up times, flow times, costs of production and acceptance equipment, and compiles cost estimates and delivery quotations, monitors performance, and prepares reports, statistics, and recommendations for management review.
  • Contributes to business growth through the pursuit of new technology; participates in establishing operating procedures on new products and components.
  • Defines and recommends new designs, design changes, and alternate designs of instruments, and test equipment, and orders tooling, gaging, and equipment necessary to assure product quality.
  • Plans and performs engineering testing and development programs and uses advanced statistical and scientific methods to address and resolve critical engineering and production problems to assure product manufacturability.
  • Originates, refines, and releases complex manufacturing or inspection work directions.
  • Determines acceptability of processes and materials in conjunction with customers, design agency, quality, and other affected organizations.
  • Interacts with customers, design agency and/or supplier counterparts to resolve moderate to complex design, development, production and acceptance issues.
  • Based on research, applies, develops and recommends innovative methodologies and technologies which are equal to the industry's state of the art to resolve processing and design problems.
  • Provides technical consultation to management and others, and leads technical project teams. 
  • Responsible for work that may involve longer range and/or complex business objectives in field of expertise.
  • Evaluates and implements innovations and technological advances that improve quality, reduce flowtime, improve productivity, and enhance operational surety.
  • Performs highly complex calibration and measurement services, recommends changes in calibration procedures to improve services, and solves special measurement problems.
  • May perform other duties as required.
  • Conducts activities in a safe and healthy manner and works in accordance with established HS&E requirements to ensure the protection of employees, the public, and the environment.  Takes actions necessary to "stop" work when an unsafe condition or action is identified.  Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

Basic Qualifications: 
  • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
  • Bachelor of Science degree in Electrical Engineering from an ABET accredited program or an equivalent ABET accredited engineering degree.
  • Minimum two (2) years directly applied engineering experience.


Additional Qualifications: 

  • Five (5) or more years directly applied engineering experience in a technology and/or manufacturing environment preferred.
  • Advanced degree in an engineering, physics or business discipline is advantageous.
  • Six Sigma certification (black belt; green belt) preferred.
  • Experience/history reflective of executing continuous improvement toward products and/or processes.
  • Technical project management experience.
  • Experience/familiarity with enterprise resource planning and/or earned value management systems.
  • Experience presenting technical material to varied levels of audiences.
  • Willingness to travel up to 25% of time.

 
Job Number: 1710068676
Job Location: KS City, MO
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tanya James
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Jr0WAAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Duration: 1 year contract
Pay Rate: DOE ($50/hr - $55/hr)
Location: Grand Prairie, TX
Shift: First, 9/80
*The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years)*

Job Description:
-Analog engineer is required to design a power voltage card to convert voltages between mature subsystems.
-The power voltage card will need to fit within an existing space.
-This effort will require part selection, design review, and design release.
-The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-The engineer must be proficient in Cadence; have good communication skills.

Mandatory Skills:
-Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-Bachelors degree in Electrical Engineering with five or more years of experience.
-Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
-Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting.
-Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes.
-Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills.
-Proficiency with electronic analyzers and other trouble shooting tools is required.
-Ability to develop system and subsystem performance requirements.
-Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis.

REQUIRED Skill Matrix:
-Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. : (9-10 years)
 
Job Number: 7065
Job Location: Grand Prairie, TX
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 12/26/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3 with active secret TX

Description:
158440/1251
Electrical Engineer - Level 3
Grand Prairie TX
60/hr
Active Secret
12 months

Description
Analog engineer is required to design a power voltage card to convert voltages between mature subsystems. The power voltage card will need to fit within an existing space. This effort will require part selection, design review, and design release. The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years). The engineer must be proficient in Cadence; have good communication skills.
Skill/Experience/Education
Mandatory:

Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years). Bachelors degree in Electrical Engineering with five or more years of experience. Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting. Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes. Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills. Proficiency with electronic analyzers and other trouble shooting tools is required. Ability to develop system and subsystem performance requirements. Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Circuit Design Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. 9-10 Years Yes
 
Job Number: JE-1251
Job Location: Grand Prairie, TX
Rate: 60/hr max
Duration: 12 month contract
Input Date: 08/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer with active secret CA

Description:
Job Title: Electrical Engineer
Job Number: 159158/0498
Location: Palmdale, CA
Compensation: 65-75/hr
Assignment Length: 12 month contract
Security Clearance Secret

Description:


Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, products, and systems for commercial, industrial, and domestic purposes. The applicant will be focused on the electrical wiring and harness assembly diagram design and development for an ADP program. Duties include creating electrical architectures/schematics and creating electrical harness drawings. Also includes resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised manufacturing wiring documents. .
Skill/Experience/Education
Mandatory:

Experience creating electrical architectures/schematics and electrical harness design. Experience using electrical harness design tools such as Mentor Graphics Capital Harness or HarnesSyS.
Secret Clearance.
Desired:

Experience performing electrical load analysis and electrical power system integration
Experience with CATIA V5 Experience generating System Check Procedures and providing support Experience incorporating subsystem hardware into a Software Integration Lab (SIL) and troubleshooting integration issues.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Wiring Harness Design Design aircraft electrical wiring harnesses, preferably using Mentor Graphics Capital Harness. 6-8 Years Yes
Electrical architecture/schematic design Evaluate system requirements to generate electrical architectures and schematics. 6-8 Years Yes
Electrical Power System Design Evaluate electrical load requirements and design electrical power and distribution systems. 6-8 Years No
 
Job Number: DW-0498
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 06/23/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineers (Level 3) - Atlanta, GA

Description:
STS AeroStaff Services is currently hiring Electrical Engineers (Level 3) for open positions in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Evaluate reliability metrics and develop plans to improve
• Understand LRU failures and participate in supplier RCA’s and countermeasure implementation
• Review supplier Service Bulletins and issue client paperwork for fleet implementation; including Software and Hardware changes
• Review supplier Manual changes and issue client paperwork for incorporation into client Tech Pubs
• Support IFE/IFC Reliability Team (206) and participate in Daily Ops meeting

Basic Qualifications:

• 8+ years’ related experience
• Bachelor’s Degree in Electrical Engineering
• Previous IFE or IFC experience
• Advanced troubleshooting skills (i.e. SixSigma, FMEA, etc.)

Preferred Skills/Certifications:

• Software Safety (i.e. DO-178B)
• Operational Experience

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38901
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 06/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Electrical Power System Engineer

Description:
• System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing
• Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings
• Software Certification: Experience reviewing PSAC, CIA, SAS.
• Experience in software V&V.

Required Experience in the following:
• Electrical Power Generation, control and indicating
• Secondary Power Distribution, control and indicating
• Solid State Electrical Power.

Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Project Management

Skills/Experience:
• Configuration change management
 
Job Number: 24-174
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Level 3 with active secret TX

Description:
Embedded S/W Engineer - Level 3
Description
Lockheed Martin Missiles & Fire Control is seeking a qualified Software Engineer to work in the Grand Prairie, TX office. As a Patriot Missile (PAC-3) Hardware In The Loop (HWIL) Software Engineer, the ideal candidate will have experience with real time systems, experience with real time embedded operating systems and software, Unit Under Test (UUT) programming & integration, open architecture software development, past integration of disparate systems, and Missile Seeker integration experience. Understanding of hardware interfaces and familiarity with missile subsystems is a plus.
Candidates must be able to apply the appropriate standards, processes, procedures, and tools throughout the development life cycle. Active SECRET Clearance is required. Will need clearance status on resume. Needs clearance from the start.
Skill/Experience/Education
Mandatory:

The candidate should be a self-starter and possess the following skills:
• Secret Clearance Required
• BS in Computer Science, Software Engineering, or Related Field
• C/C++
• Razor (CM Control)
• ADA
• Linux (Red Hat)
• Domain Knowledge of Air and Missile Defense
• Seeker Programming and/or Integration
• Seeker Programming and/or Integration
Hardware-in-the-Loop (HWIL) Unit Under Test (UUT)

Desired:

Desired Skills:
• Razor (CM Control)

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Secret Clearance Required 4-5 Years Yes
BS in Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Razor (CM Control) 0-3 Years No
ADA 4-5 Years Yes
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years Yes
Seeker Programming and/or Integration 4-5 Years Yes
Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years Yes

Special Needs
There is No Special Needs For this Requirement
 
Job Number: JE-1270
Job Location: Grand Prairie, TX
Rate: 65/hr max
Duration: 12 month contract
Input Date: 08/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Developer - RM

Description:
Embedded Software Developer - 15+ month contract opportunity!

Description:

Embedded Software developer for Flight Management Systems. Familiarity with Ada 95 computer programming language, VxWorks Operating System are a plus.
Candidate must demonstrate ability to develop source code, work in a team environment and be familiar with working within the guidelines of software development lifecycle and DO-178B or DO-178C standards/guidelines.
The work encompasses obtaining requirements, implementing software changes and documentation changes to an existing baseline, software debug and checkout in a lab environment using DataSims, WireShark and other software development and test tools.
Additional support to the independent test team may also be required.
Location: Stratford, CT
 
Job Number: 356464
Job Location: Stratford, CT
Rate: $49hr
Per Diem: yes
Overtime: Yes
Duration: 15 months
Start Date: asap
Input Date: 06/16/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Mardinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Active Secret Clearance.

Real time embedded Software Engineer with experience in Aviation, GPS or Missile Systems
 
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 06/09/2017
Firm Name: PANTHER GROUP
Attention: Bill
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-DOD Secret Clearance Required (Must have active/transferable Secret Clearance) (4-5 Years experience)
-BS in Computer/Software Engineering, Computer Science, or Related Field (4-5 Years experience)
-C/C++ (4-5 Years experience)
-COTS SBC (0-3 Years experience)
-Linux (Red Hat) (4-5 Years experience)
-VxWorks (4-5 Years experience)
-Git (4-5 Years experience)
-J1939 or CANBus experience (4-5 Years experience)
-Eclipse (4-5 Years experience)
-Embedded SW Engineering (4-5 Years experience)
-Ground Vehicles and Autonomy Experience (4-5 Years experience)

Desired:
-Driver Development (0-3 Years experience)
-Python (0-3 Years experience)
-ROS (0-3 Years experience)
-CODESYS (0-3 Years experience)
 
Job Number: 7297
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 07/19/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-US DOD Secret Clearance Required (4-5 years experience)
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
-C/C++ (4-5 years experience)
-Linux (Red Hat) (4-5 years experience)
-Embedded SW Engineering (4-5 years experience)

Desired:
-Razor (CM Control)
-Domain Knowledge of Air and Missile Defense
-Seeker Programming and/or Integration
-Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT)
 
Job Number: 7295
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-DOD Secret Clearance Required (Must have active/transferable Secret Clearance) (4-5 Years experience)
-BS in Computer/Software Engineering, Computer Science, or Related Field (4-5 Years experience)
-Modern C/C++ (4-5 Years experience)
-Agile Product Development (4-5 Years experience)
-Linux (Red Hat) (4-5 Years experience)
-Boost Libraries (4-5 Years experience)
-Web Services (SOAP/REST) (4-5 Years experience)
-Jenkins (4-5 Years experience)
-Continuous Integration (4-5 Years experience)
-Qt Application Framework (0-3 Years experience)

Desired:
-Domain Knowledge of Air and Missile Defense (0-3 years experience)
 
Job Number: 7298
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 09/07/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 3

Description:
Embedded Software Engineer - Level 3

Location: Grand Prairie, TX
Pay Rate: $70/hr - $80/hr (DOE)
Duration: 6+ Month Contract
Shift: First, 9/80
*Active SECRET Clearance is required*

Description
As a Patriot Missile (PAC-3) Hardware In The Loop (HWIL) Software Engineer, the ideal candidate will have experience with real time systems, experience with real time embedded operating systems and software, Unit Under Test (UUT) programming & integration, open architecture software development, past integration of disparate systems, and Missile Seeker integration experience. Understanding of hardware interfaces and familiarity with missile subsystems is a plus. Candidates must be able to apply the appropriate standards, processes, procedures, and tools throughout the development life cycle.

Skill/Experience/Education
Mandatory: (must meet all requirements)
The candidate should be a self-starter and possess all of the following skills:
• Secret Clearance Required: 4+ years of experience
• BS in Computer Science, Software Engineering, or Related Field: 4+ years of experience
• C/C++: 4+ years of experience
• ADA: 4+ years of experience
• Linux (Red Hat): 4+ years of experience
• Domain Knowledge of Air and Missile Defense: 4+ years of experience
• Seeker Programming and/or Integration: 4+ years of experience
• Hardware-in-the-Loop (HWIL) – Unit Under Test (UUT) Experience: 4+ years of experience

Desired:
• Razor (CM Control): 0-3 years of experience
 
Job Number: 7137
Job Location: Grand Prairie, TX
Rate: 70-80
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer Level 2 with active secret TX

Description:
Lockheed Martin MFC 1368
Recruiter to Contact:
Job Title: Embedded Software Engineer Level 2
Job Number: 159149/1368
Location: Grand Prairie, TX
Compensation: 80/hr
Assignment Length: 12 month contract
Security Clearance Active Secret
Exempt

Description:


Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.

Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel.

Must have active / transferable Secret Clearance prior to submittal and shown on resume.

Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, Modern C/C++, Agile Product Development, Linux (Red Hat), Boost Libraries, Web Services (SOAP/REST),Jenkins , Continuous Integration, Qt Application Framework

Desired:

Domain Knowledge of Air and Missile Defense


Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
Modern C/C++ 4-5 Years Yes
Agile Product Development 4-5 Years Yes
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years No
Boost Libraries 4-5 Years Yes
Web Services (SOAP/REST) 4-5 Years Yes
Jenkins 4-5 Years Yes
Continuous Integration 4-5 Years Yes
Qt Application Framework 0-3 Years Yes
 
Job Number: DW-0368
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 06/23/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine-APU, ECS, Fuel Systems Engineer

Description:
UNIQUE SKILLS
Required Experience in the following: • System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing • Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings • Software Certification: Experience reviewing PSAC, CIA, SAS. Experience in software V&V Required Experience in the following: • Engine Systems (FADEC) • Environmental Control Systems • APU systems • Fuel systems (Distribution and Indication) Desired Experience in the following: • Working Knowledge ARP4754 and CFR 25 • Exposure to Part 33 certification • Project Management Skills/Experience: • Configuration change management
 
Job Number: 17-739-98102
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/13/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Engine/APU, ECS, Fuel Systems Engineer

Description:
Engine/APU, ECS, Fuel Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Required Experience in the following:
• System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing
• Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings
• Software Certification: Experience reviewing PSAC, CIA, SAS. Experience in software V&V Required Experience in the following:
• Engine Systems (FADEC)
• Environmental Control Systems
• APU systems
• Fuel systems (Distribution and Indication)

Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Exposure to Part 33 certification
• Project Management Skills/Experience:
• Configuration change management
 
Job Number: 7519
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Engineer - Software I

Description:
PDS Tech, Inc. is seeking a candidate for the Engineer - Software I position located in Arlington, Tx.
 

Our customer is looking for entry level software engineering talent who will design, develop, document, test and debug applications for real-time aircraft simulation products.

•This is a hands on software engineering position
•The successful candidate will support integration and configuration of computational system architecture and software for real-time simulation applications
•Entry level engineers will support functional requirements implementation for software systems
•Create new simulation models using established and new modeling techniques
•Design, develop, code, integrate and test simulation software to meet requirements
•Troubleshoot and maintain existing simulation models
•Apply software engineering principles to complete assigned tasks and schedule commitments
•Complete work with a reasonable amount of direction
•Must possess the ability to work within and positively contribute to a team environment
•Apply sound engineering principles, develop innovative solutions and participate in design reviews
•Prepare, check and coordinate release of support documentation to appropriate program and company standards
•Communicate status/issues along with solutions/recommendations to lead engineers

Required experience:
•Intermediate level of C#, C++ or JAVA
•Ability to navigate and develop basic scripts in LINUX
•Version control over code
•Debugging

Preferred experience:
•Graphics programming
•Physics Engine
•Artificial Intelligence
•Networking
•Must be able to obtain a DOD security clearance.

Education:
•BS in Computer Science or Computer Engineering or equivalent required

 
Job Number: 1710069348
Job Location: Arlington, TX
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002K3RcAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Enterprise Architect (Data Modeler) Level 5 (KS)

Description:
Designs, defines and engineers system architecture for new or existing complex computer systems within a defined business process. Determines and defines systems specifications, input/output processes, context, interface, integration, and working parameters for hardware/software compatibility and maintenance of system security. Coordinates design of subsystems and their integration into the total system. Uses knowledge of systems engineering, software improvement frameworks, network architecture, system performance analysis, and information system security to identify, analyze, and resolve program deficiencies. Develops and recommends corrective actions, as well as identifies risks and gaps associated with current system constraints. May provide technical guidance for database administrators and software developers.

Requirements:
Duration: Hiring Manager is wanting to hire direct. Candidates must know this position could end earlier than 90 days if Client finds direct hires. Hiring Manger would be interested in contract to direct placement.

Shift: 1st

Little to no OT

No traveling involved

No Per Diem

Must have a Bachelor's degree or better.

Desired Skills:

· Knowledge of IT architecture of multi-sites and enterprise-wide IT solutions

· Understanding of Lean, Six Sigma principles

· Knowledge and understanding of business requirement analysis and design including: documentation of data and system architectures

· Ability to synthesize complex analytical findings into executive level communications

· Knowledge and understanding of data governance challenges and approaches: metadata, data quality, and data stewardship

· Ability to articulate a complex problem, design, or build strategy

· Familiar with The Open Group Architecture Framework and the Process Classification Framework

· Experience with SAP HANA Enterprise in Information Modeling, Database design, Data Provisioning, SAP HANA SQLScript, HANA Live and PAL

Qualifications:

· Bachelor or Master Degree: Engineering, Computer Science or other technical discipline

· Excellent verbal, written, and interpersonal communication skills

· 5+ years’ experience in data design, data architecture and data modeling (both transactional and analytic), Relational or Dimensional data design and modeling, DDL development and database design

Experience with data modeling tools
FOSTER DESIGN'S BENEFITS:
• Working for a 53-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-500225KS
Job Location: Wichita, KS
Rate: $BOE/HR
Per Diem: No
Overtime: No much, if any
Duration: 6 months
Start Date: 07/07/2017
Input Date: 08/02/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Enterprise Architect (Enterprise Data Architect) Level 5 (KS)

Description:
Designs, defines and engineers system architecture for new or existing complex computer systems within a defined business process. Determines and defines systems specifications, input/output processes, context, interface, integration, and working parameters for hardware/software compatibility and maintenance of system security. Coordinates design of subsystems and their integration into the total system. Uses knowledge of systems engineering, software improvement frameworks, network architecture, system performance analysis, and information system security to identify, analyze, and resolve program deficiencies. Develops and recommends corrective actions, as well as identifies risks and gaps associated with current system constraints. May provide technical guidance for database administrators and software developers.
Requirements:

Duration: Hiring Manager is wanting to hire direct. Hiring Manger would be interested in contract to direct placement.

Shift: 1st

Little to no OT

No traveling involved

No Per Diem

Must have a Bachelor's degree or better.

Desired Skills:

· Knowledge of IT architecture of multi-sites and enterprise-wide IT solutions

· Understanding of Lean, Six Sigma principles

· Knowledge and understanding of business requirement analysis and design including: documentation of data and system architectures

· Ability to synthesize complex analytical findings into executive level communications

· Knowledge and understanding of data governance challenges and approaches: metadata, data quality, and data stewardship

· Ability to articulate a complex problem, design, or build strategy

· Familiar with The Open Group Architecture Framework and the Process Classification Framework

· Experience with SAP HANA Enterprise in Information Modeling, Database design, Data Provisioning, SAP HANA SQLScript, HANA Live and PAL



Qualifications:

· Bachelor or Master Degree: Engineering, Computer Science or other technical discipline

· Experience with Power Designer Data Modeling tool

· 5-10 years of overall Enterprise Data Architecture experience

Excellent verbal, written, and interpersonal communication skills

FOSTER DESIGN'S BENEFITS:
• Working for a 53-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-501562KS
Job Location: Wichita, KS
Rate: $BOE/HR
Per Diem: No
Overtime: No much, if any
Duration: 6 months
Start Date: 07/07/2017
Input Date: 08/02/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Enterprise Architect (MES Solution Architect) Level 5 (KS)

Description:
esigns, defines and engineers system architecture for new or existing complex computer systems within a defined business process. Determines and defines systems specifications, input/output processes, context, interface, integration, and working parameters for hardware/software compatibility and maintenance of system security. Coordinates design of subsystems and their integration into the total system. Uses knowledge of systems engineering, software improvement frameworks, network architecture, system performance analysis, and information system security to identify, analyze, and resolve program deficiencies. Develops and recommends corrective actions, as well as identifies risks and gaps associated with current system constraints. May provide technical guidance for database administrators and software developers.
Requirements:
Duration: Hiring Manager is wanting to hire direct. Candidates must know this position could end earlier than 90 days if Client finds direct hires. Hiring Manger would be interested in contract to direct placement.

Shift: 1st

Little to no OT

No traveling involved

No Per Diem

Must have a Bachelor's degree or better.

Desired Skills:

· Excellent presentation and facilitation skills

· Able to work independently and efficiently to meet deadlines

· Able to multi-task multiple priorities in a fast-paced environment

· Self motivated, detail-oriented and excellent organizational and time management skills

· Team player with a ‘can-do’ positive attitude

· Able to coordinate deployments at multiple work sites – including international

Qualifications:

· Bachelor or Master Degree: Engineering, Computer Science or other technical discipline

· Experience with Apriso MES/MOM technology in the solution architecture space

· 5-10 years of overall MES experience, out of which minimum 4 years should be on Apriso Flexnet

· Knowledge of IT architecture of multi-sites and enterprise-wide IT solutions

· Understanding of Lean, Six Sigma, and supply chain principles

Familiar with SQL data architectures

FOSTER DESIGN'S BENEFITS:
• Working for a 53-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-501558KS
Job Location: Wichita, KS
Rate: $BOE/HR
Per Diem: No
Overtime: No much, if any
Duration: 3 months
Start Date: 07/07/2017
Input Date: 08/02/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Enterprise Architect (Mobile Solution Architect) Level 5 (KS)

Description:
Designs, defines and engineers system architecture for new or existing complex computer systems within a defined business process. Determines and defines systems specifications, input/output processes, context, interface, integration, and working parameters for hardware/software compatibility and maintenance of system security. Coordinates design of subsystems and their integration into the total system. Uses knowledge of systems engineering, software improvement frameworks, network architecture, system performance analysis, and information system security to identify, analyze, and resolve program deficiencies. Develops and recommends corrective actions, as well as identifies risks and gaps associated with current system constraints. May provide technical guidance for database administrators and software developers.

Requirements:
Duration: Hiring Manager is wanting to hire direct. Candidates must know this position could end earlier than 90 days if Client finds direct hires. Hiring Manger would be interested in contract to direct placement.

Shift: 1st
Little to no OT
No traveling involved
No Per Diem

Must have a Bachelor's degree or better.

Desired Skills:

· Excellent presentation and facilitation skills

· Able to work independently and efficiently to meet deadlines

· Able to multi-task multiple priorities in a fast-paced environment

· Self motivated, detail-oriented and excellent organizational and time management skills

· Team player with a ‘can-do’ positive attitude

· Able to coordinate deployments at multiple work sites – including international

· Strong knowledge of enterprise IT architectures, web services, and web protocols

· Ability to create robust and scalable high volume mobile applications, developing prototypes quickly.

· Citrix XenApp, XenDeskop, and XenMobile for application delivery, virtualization, and containerization

· Citrix Netscaler or comparable load balancing and micro-VPN infrastructure

· Familiarity with industry security requirements such as FIPS, NIST, and EAR/ITAR

· Familiarity with mobile communication apps and methods, including Exchange, Outlook, Skype for Business

· Popular mobile platforms, including iOS, Android, ChromeOS

Qualifications:

· Bachelor or Master Degree: Engineering, Computer Science or other technical discipline

· 5-10 years of overall mobile architecture experience

· Knowledge of IT architecture of multi-sites and enterprise-wide IT solutions

Understanding of Lean, Six Sigma, and supply chain principles
FOSTER DESIGN'S BENEFITS:
• Working for a 53-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-501560KS
Job Location: Wichita, KS
Rate: $BOE/HR
Per Diem: No
Overtime: No much, if any
Duration: 6 months
Start Date: 07/07/2017
Input Date: 08/02/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Firmware Engineer

Description:
• A minimum of 3 years experience as a Hardware / Firmware Engineer that includes the following:
 Source code repository (Git, Subversion, etc.)
 Bug tracking tool suites
 Source code peer review processes
 Automated build environments
 Strong troubleshooting mentality
 Team-oriented and task-focused
 Software or firmware design principles
 Operate spectrum analyzers and oscilloscope
 Analog and digital hardware design experience
 Strong electrical engineering fundamentals
 Sets the highest ethical standards for self and others
• A minimum of a Bachelor’s Degree

Required: Non-Negotiable -
• Resume must reflect FPGA design experience (Xilinx Vivado preferred)
• Resume must reflect VHDL or Verilog proficiency
• Resume must reflect HDL simulation tools
• Resume must reflect Tcl scripting familiarity
Preferred but not required -
• DoD secret security clearance
 
Job Number: APFIRM8690
Job Location: Waco, TX
Rate: OPEN
Per Diem: No
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 06/19/2017
Firm Name: YOH SERVICES
Attention: Jessalyn McKeown
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/275-1218
800 Phone: 800/298-0666
Website: jobs.yoh.com

Firmware Engineer- DOD secret security clearance

Description:
PDS Tech, Inc. is seeking a candidate for the Firmware Engineer- DOD secret security clearance position located in Waco, TX.

 
Qualifications:
• A minimum of 3 years experience as a Hardware / Firmware Engineer that includes the following:
 Source code repository (Git, Subversion, etc.)
 Bug tracking tool suites
 Source code peer review processes
 Automated build environments
 Strong troubleshooting mentality
 Team-oriented and task-focused
 Software or firmware design principles
 Operate spectrum analyzers and oscilloscope
 Analog and digital hardware design experience
 Strong electrical engineering fundamentals
 Sets the highest ethical standards for self and others
• A minimum of a Bachelor’s Degree


Non-Negotiable:
• Resume must reflect FPGA design experience (Xilinx Vivado preferred)
• Resume must reflect VHDL or Verilog proficiency
• Resume must reflect HDL simulation tools
• Resume must reflect Tcl scripting familiarity


Preferred but not required:
• DoD secret security clearance

 
Job Number: 1710069518
Job Location: Waco, TX
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Cm2tAAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

Essential Functions:
Coordinate test and certification requirements.
Author flight test and ground test plans including test hazard analysis.
Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
Support instrumentation installation as required.
Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
Support flight and ground test conduct and data collection.
Analyze test data and evaluate compliance with regulations.
Prepare certification test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 12/07/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineer

Description:
Flight Test Instrumentation Engineer

Location: Savannah, GA
Pay Rate: $70/hr - $77/hr
Duration: Long Term Contract
Shift: First
Travel: Yes, approximately 20%

Unique Skills:
-Experience with RF Telemetry systems supporting Flight Test activities.
-Full working knowledge of IADS, TTC DAS, and network equipment configuration and installations.

Education and Experience Requirements:
Bachelor's Degree in related field required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Master's Degree preferred. 5 years of progressively responsible HR experience.

Position Purpose:
-The Instructional Design Consultant is responsible for leading the creation and maintenance of all formal and informal training solutions across the enterprise.
-Develops, enhances and updates the curriculum for all Company training in order to achieve enterprise wide training solutions.
-Responsibilities include planning, coordinating and developing strategic training initiatives for the enterprise.

Principle Duties and Responsibilities/Essential Functions:
1. Operates as an organizational leader and internal consultant to management in the identification, development, and implementation of training solutions.
2. Demonstrates and utilizes effective needs analysis, project management, course development, and evaluation skills in all areas of the business.
3. Evaluates business needs to determine the appropriate learning strategies needed to meet organizational goals.
4. Collaborates with internal customers and subject matter experts to obtain knowledge of subject areas and develop targeted training curriculum that meets the identified needs of the business. Serves as internal consultant and project leader for instructional design/training related initiatives.
5. Works with other members of the training department to design training programs that are in alignment with adult learning principles and instructional design best practices.
6. Responsible for coordinating the design, development and editing of training assets with internal resources for both audio and visual communication.
7. Conduct needs assessment to understand the needs of the business. Based on the analysis of multiple sources of information, design, develop and revise training and development programs to achieve business objectives and improve on-the-job performance.
8. Analyzes training needs, develops and administers training plans and programs. Expert in the use and ability to develop others to use a wide range of media and design tools used to design and distribute course materials to all company locations.
9. Reviews external training materials for effectiveness, and recommends acquisition of materials that meet the company’s standards.
10. Advises and develops staff members in techniques and methods of developing and evaluating specialized materials and curriculum.
11. Evaluate course effectiveness, recommend and implement modifications based on quantitative and qualitative feedback. Evaluate the success of training effectiveness and return on investment.
12. Apply Kirkpatrick's Four-Level Training Evaluation Model to objectively analyze the effectiveness and impact of training.
13. Build and maintain a comprehensive knowledge of all company processes, procedures related to manufacturing and repair station.

Additional Functions:
1. Travel required. Approximately 20 percent. Perform other duties as assigned.

Other Requirements:
1. Consulting and project management skills, familiarity with a wide variety of training media and a strong foundation in needs assessment, adult learning principles, behavior modeling and competency assessment required.
2. Expert level knowledge of Word Processing software; Adobe Suite Software; Spreadsheet software; Design software and Project Management software.
3. Analytical skills and high-level of attention to detail.
4. Ability to multitask in a fast-paced work environment.
5. High-degree of flexibility and adaptability.
 
Job Number: 7325
Job Location: Savannah, GA
Rate: 70-77
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/03/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineering Consultant

Description:
Unique Skills:
Experience with RF Telemetry systems supporting Flight Test activities. Full working knowledge of IADS, TTC DAS, and network equipment configuration and installations.

Education and Experience Requirements:
Bachelor's Degree in related field required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Master's Degree preferred. 5 years of progressively responsible HR experience.

Position Purpose:
The Instructional Design Consultant is responsible for leading the creation and maintenance of all formal and informal training solutions across the enterprise. Develops, enhances and updates the curriculum for all Gulfstream training in order to achieve enterprise wide training solutions. Responsibilities include planning, coordinating and developing strategic training initiatives for the enterprise.

Principle Duties and Responsibilities:
Essential Functions:
1. Operates as an organizational leader and internal consultant to management in the identification, development, and implementation of training solutions.
2. Demonstrates and utilizes effective needs analysis, project management, course development, and evaluation skills in all areas of the business.
3. Evaluates business needs to determine the appropriate learning strategies needed to meet organizational goals.
4. Collaborates with internal customers and subject matter experts to obtain knowledge of subject areas and develop targeted training curriculum that meets the identified needs of the business. Serves as internal consultant and project leader for instructional design/training related initiatives.
5. Works with other members of the training department to design training programs that are in alignment with adult learning principles and instructional design best practices.
6. Responsible for coordinating the design, development and editing of training assets with internal resources for both audio and visual communication.
7. Conduct needs assessment to understand the needs of the business. Based on the analysis of multiple sources of information, design, develop and revise training and development programs to achieve business objectives and improve on-the-job performance. 8. Analyzes training needs, develops and administers training plans and programs. Expert in the use and ability to develop others to use a wide range of media and design tools used to design and distribute course materials to all GAC locations.
9. Reviews external training materials for effectiveness, and recommends acquisition of materials that meet the company’s standards.
10. Advises and develops staff members in techniques and methods of developing and evaluating specialized materials and curriculum.
11. Evaluate course effectiveness, recommend and implement modifications based on quantitative and qualitative feedback. Evaluate the success of training effectiveness and return on investment.
12. Apply Kirkpatrick's Four-Level Training Evaluation Model to objectively analyze the effectiveness and impact of training.
13. Build and maintain a comprehensive knowledge of all Gulfstream processes, procedures related to manufacturing and repair station.

Additional Functions:
1. Travel required. Approximately 20 percent. Perform other duties as assigned.

Other Requirements:
1. Consulting and project management skills, familiarity with a wide variety of training media and a strong foundation in needs assessment, adult learning principles, behavior modeling and competency assessment required.
2. Expert level knowledge of Word Processing software; Adobe Suite Software; Spreadsheet software; Design software and Project Management software.
3. Analytical skills and high-level of attention to detail.
4. Ability to multitask in a fast-paced work environment.
5. High-degree of flexibility and adaptability.
 
Job Number: 17-689-99983
Job Location: Southeast
Rate: $70.00 to $77.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 08/08/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Graphic Designer 4

Description:
PDS is seeking a  Graphic Designer for an open position in Huntington Beach, CA.

    Responsibilities:

    • Create and execute integrated campaigns across platforms that include digital, print, mobile, event and retail

    • Consistently apply established best practices and brand standards

    • Deliver compelling creative work that supports business objectives, within budget and on schedule

    • Digital file management and archiving
    As our ideal candidate, you will meet the following requirements:
    • Skills:

      • Demonstrated knowledge of design principles including layout, typography, color, composition, and current design trends

      • Ability to take direction, execute with acute attention to detail and respond quickly to changing priorities in a dynamic, deadline-driven environment

      • Experience and technical mastery of current Adobe Creative Suite and Microsoft software applications
    • Qualifications:

      • A Bachelor’s degree in Design, Fine Arts or a related field

      • Along with resume, submit link to digital portfolio highlighting previous work

     
    Job Number: 1710066565
    Job Location: Huntington Beach, CA
    Per Diem: No
    Duration: 12 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: 12720 GATEWAY DR S STE 102
    City, State: TUKWILA, WA 98168-3333
    Phone: 206/763-2840
    800 Phone: 800/678-8644
    Fax Phone: 206/763-3283
    Email: cecjseattle@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021jcGAAQ&URLSource=cjhunter

    Guidance, Navigation, and Control Engineer

    Description:
    Guidance, Navigation and Control Engineer
     
    PDS Tech is hiring experienced GNC Engineers for current and recurring positions in the Los Angeles area.
     
    Roles and Responsibilities (including some or all of the following):
    • System design, analysis, modeling, and simulation
    • Flight system performance analysis including nonlinear modeling, digital control, and system effectiveness analysis
    • Navigation system error analysis
    • Simulation - to include evaluation under nominal, off-nominal, and Monte Carlo flight modes
    • Develop, modify, and maintain hazards assessment tools to evaluate instantaneous impact points (IIP) and probability of impact
    • Develop, modify, and maintain GPS and telemetry processing tools for the reduction and analysis of flight test to determine Best Estimate of Trajectory (BET)
    • Prepare presentations, reports, research, and other contract deliverables related to analyses performed
    • Defining, analyzing, and reviewing results from model simulations
    • Using results of modeling and simulations to predict performance
    • Updating of models based on designs, test results, and other data
    • Statistical analysis to quantify effect of individual errors on system accuracy

    Required Qualifications:
    To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:

    • BS in engineering or physics with 3+ years or MS in engineering or physics with 5+ years engineering experience with complex systems engineering
    • 3+ years' experience with system simulation and software engineering processes (e.g., requirements development for new subsystem, requirements analysis and management, design development and review, configuration management, interface control)
    • 3+ years system simulation and/or data analysis of airborne flight systems or equivalent
    • Experience with statistical analysis of test and simulation results using tools such as MATLAB
    • Experience in at least one of the following: control systems engineering, dynamic six degree of freedom modeling and simulation, launch vehicle analysis, navigation systems. Preference given to multiple skills
    • Must have demonstrated presentation skills and experience interfacing with customer
    • Position requires a proactive, self-starting, independent, flexible engineer with excellent interpersonal skills
    • Must have a current Secret security clearance or able to obtain clearance

    Desired Qualifications:
    Candidates with these desired skills will be given preferential consideration:

    • BS, MS or PhD in engineering or physics
    • Understanding of engineering disciplines including aerodynamics and structural dynamics
    • Experience in one or more of the following: Kalman Filtering, software development, Linux scripting, makefiles, Python, revision control systems

     

     



     
    Job Number: 1710065200
    Job Location: Los Angeles, CA
    Duration: 12 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Karla Pelonis
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WIeAAM&URLSource=cjhunter

    Guidance, Navigation, and Control Engineer

    Description:
    Guidance, Navigation and Control Engineer
     
    PDS Tech is hiring experienced GNC Engineers for current and recurring positions in the Tuscon area.
     
    Roles and Responsibilities (including some or all of the following):
    • System design, analysis, modeling, and simulation
    • Flight system performance analysis including nonlinear modeling, digital control, and system effectiveness analysis
    • Navigation system error analysis
    • Simulation - to include evaluation under nominal, off-nominal, and Monte Carlo flight modes
    • Develop, modify, and maintain hazards assessment tools to evaluate instantaneous impact points (IIP) and probability of impact
    • Develop, modify, and maintain GPS and telemetry processing tools for the reduction and analysis of flight test to determine Best Estimate of Trajectory (BET)
    • Prepare presentations, reports, research, and other contract deliverables related to analyses performed
    • Defining, analyzing, and reviewing results from model simulations
    • Using results of modeling and simulations to predict performance
    • Updating of models based on designs, test results, and other data
    • Statistical analysis to quantify effect of individual errors on system accuracy

    Required Qualifications:
    To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:

    • BS in engineering or physics with 3+ years or MS in engineering or physics with 5+ years engineering experience with complex systems engineering
    • 3+ years' experience with system simulation and software engineering processes (e.g., requirements development for new subsystem, requirements analysis and management, design development and review, configuration management, interface control)
    • 3+ years system simulation and/or data analysis of airborne flight systems or equivalent
    • Experience with statistical analysis of test and simulation results using tools such as MATLAB
    • Experience in at least one of the following: control systems engineering, dynamic six degree of freedom modeling and simulation, launch vehicle analysis, navigation systems. Preference given to multiple skills
    • Must have demonstrated presentation skills and experience interfacing with customer
    • Position requires a proactive, self-starting, independent, flexible engineer with excellent interpersonal skills
    • Must have a current Secret security clearance or able to obtain clearance

    Desired Qualifications:
    Candidates with these desired skills will be given preferential consideration:

    • BS, MS or PhD in engineering or physics
    • Understanding of engineering disciplines including aerodynamics and structural dynamics
    • Experience in one or more of the following: Kalman Filtering, software development, Linux scripting, makefiles, Python, revision control systems

     

     



     
    Job Number: 1710065198
    Job Location: Tucson, AZ
    Duration: 12 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: David Goodman
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WIPAA2&URLSource=cjhunter

    Guidance, Navigation, and Control Engineer

    Description:
    Guidance, Navigation and Control Engineer
     
    PDS Tech is hiring experienced GNC Engineers for current and recurring positions in the Minneapolis area.
     
    Roles and Responsibilities (including some or all of the following):
    • System design, analysis, modeling, and simulation
    • Flight system performance analysis including nonlinear modeling, digital control, and system effectiveness analysis
    • Navigation system error analysis
    • Simulation - to include evaluation under nominal, off-nominal, and Monte Carlo flight modes
    • Develop, modify, and maintain hazards assessment tools to evaluate instantaneous impact points (IIP) and probability of impact
    • Develop, modify, and maintain GPS and telemetry processing tools for the reduction and analysis of flight test to determine Best Estimate of Trajectory (BET)
    • Prepare presentations, reports, research, and other contract deliverables related to analyses performed
    • Defining, analyzing, and reviewing results from model simulations
    • Using results of modeling and simulations to predict performance
    • Updating of models based on designs, test results, and other data
    • Statistical analysis to quantify effect of individual errors on system accuracy

    Required Qualifications:
    To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:

    • BS in engineering or physics with 3+ years or MS in engineering or physics with 5+ years engineering experience with complex systems engineering
    • 3+ years' experience with system simulation and software engineering processes (e.g., requirements development for new subsystem, requirements analysis and management, design development and review, configuration management, interface control)
    • 3+ years system simulation and/or data analysis of airborne flight systems or equivalent
    • Experience with statistical analysis of test and simulation results using tools such as MATLAB
    • Experience in at least one of the following: control systems engineering, dynamic six degree of freedom modeling and simulation, launch vehicle analysis, navigation systems. Preference given to multiple skills
    • Must have demonstrated presentation skills and experience interfacing with customer
    • Position requires a proactive, self-starting, independent, flexible engineer with excellent interpersonal skills
    • Must have a current Secret security clearance or able to obtain clearance

    Desired Qualifications:
    Candidates with these desired skills will be given preferential consideration:

    • BS, MS or PhD in engineering or physics
    • Understanding of engineering disciplines including aerodynamics and structural dynamics
    • Experience in one or more of the following: Kalman Filtering, software development, Linux scripting, makefiles, Python, revision control systems

     

     



     
    Job Number: 1710065197
    Job Location: Minneapolis, MN
    Duration: 12 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Roger Greco
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WIKAA2&URLSource=cjhunter

    Guidance, Navigation, and Control Engineer

    Description:
    Guidance, Navigation and Control Engineer
     
    PDS Tech is hiring experienced GNC Engineers for current and recurring positions in the Los Angeles area.
     
    Roles and Responsibilities (including some or all of the following):
    • System design, analysis, modeling, and simulation
    • Flight system performance analysis including nonlinear modeling, digital control, and system effectiveness analysis
    • Navigation system error analysis
    • Simulation - to include evaluation under nominal, off-nominal, and Monte Carlo flight modes
    • Develop, modify, and maintain hazards assessment tools to evaluate instantaneous impact points (IIP) and probability of impact
    • Develop, modify, and maintain GPS and telemetry processing tools for the reduction and analysis of flight test to determine Best Estimate of Trajectory (BET)
    • Prepare presentations, reports, research, and other contract deliverables related to analyses performed
    • Defining, analyzing, and reviewing results from model simulations
    • Using results of modeling and simulations to predict performance
    • Updating of models based on designs, test results, and other data
    • Statistical analysis to quantify effect of individual errors on system accuracy

    Required Qualifications:
    To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:

    • BS in engineering or physics with 3+ years or MS in engineering or physics with 5+ years engineering experience with complex systems engineering
    • 3+ years' experience with system simulation and software engineering processes (e.g., requirements development for new subsystem, requirements analysis and management, design development and review, configuration management, interface control)
    • 3+ years system simulation and/or data analysis of airborne flight systems or equivalent
    • Experience with statistical analysis of test and simulation results using tools such as MATLAB
    • Experience in at least one of the following: control systems engineering, dynamic six degree of freedom modeling and simulation, launch vehicle analysis, navigation systems. Preference given to multiple skills
    • Must have demonstrated presentation skills and experience interfacing with customer
    • Position requires a proactive, self-starting, independent, flexible engineer with excellent interpersonal skills
    • Must have a current Secret security clearance or able to obtain clearance

    Desired Qualifications:
    Candidates with these desired skills will be given preferential consideration:

    • BS, MS or PhD in engineering or physics
    • Understanding of engineering disciplines including aerodynamics and structural dynamics
    • Experience in one or more of the following: Kalman Filtering, software development, Linux scripting, makefiles, Python, revision control systems

     

     



     
    Job Number: 1710065202
    Job Location: Huntsville, AL
    Duration: 12 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Rebecca Burrows
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WIoAAM&URLSource=cjhunter

    Guidance, Navigation, and Control Engineer

    Description:
    Guidance, Navigation and Control Engineer
     
    PDS Tech is hiring experienced GNC Engineers for current and recurring positions in the Tamarac area.
     
    Roles and Responsibilities (including some or all of the following):
    • System design, analysis, modeling, and simulation
    • Flight system performance analysis including nonlinear modeling, digital control, and system effectiveness analysis
    • Navigation system error analysis
    • Simulation - to include evaluation under nominal, off-nominal, and Monte Carlo flight modes
    • Develop, modify, and maintain hazards assessment tools to evaluate instantaneous impact points (IIP) and probability of impact
    • Develop, modify, and maintain GPS and telemetry processing tools for the reduction and analysis of flight test to determine Best Estimate of Trajectory (BET)
    • Prepare presentations, reports, research, and other contract deliverables related to analyses performed
    • Defining, analyzing, and reviewing results from model simulations
    • Using results of modeling and simulations to predict performance
    • Updating of models based on designs, test results, and other data
    • Statistical analysis to quantify effect of individual errors on system accuracy

    Required Qualifications:
    To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:

    • BS in engineering or physics with 3+ years or MS in engineering or physics with 5+ years engineering experience with complex systems engineering
    • 3+ years' experience with system simulation and software engineering processes (e.g., requirements development for new subsystem, requirements analysis and management, design development and review, configuration management, interface control)
    • 3+ years system simulation and/or data analysis of airborne flight systems or equivalent
    • Experience with statistical analysis of test and simulation results using tools such as MATLAB
    • Experience in at least one of the following: control systems engineering, dynamic six degree of freedom modeling and simulation, launch vehicle analysis, navigation systems. Preference given to multiple skills
    • Must have demonstrated presentation skills and experience interfacing with customer
    • Position requires a proactive, self-starting, independent, flexible engineer with excellent interpersonal skills
    • Must have a current Secret security clearance or able to obtain clearance

    Desired Qualifications:
    Candidates with these desired skills will be given preferential consideration:

    • BS, MS or PhD in engineering or physics
    • Understanding of engineering disciplines including aerodynamics and structural dynamics
    • Experience in one or more of the following: Kalman Filtering, software development, Linux scripting, makefiles, Python, revision control systems

     

     



     
    Job Number: 1710065199
    Job Location: Pompano Beach, FL
    Duration: 12 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Rebecca Burrows
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WIZAA2&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Guidance, Nav & Ctrl Eng - Level 3 with active secret TX

    Description:
    Guidance, Nav & Ctrl Eng - Level 3
    Description
    Responsible for algorithm development tasks for a guided bomb program. The engineer will develop GNC algorithms and perform analyses using a 6-DOF simulation. The engineer will support integration of the algorithms into flight software and integration of the simulation with Hardware-In-The-Loop. Flight test support, system calibration, and hardware/software integration issue resolution will also be required.
    Skill/Experience/Education
    Mandatory:

    Matlab and Simulink simulation experience
    Desired:

    Hardware and software test experience
    C/C++ programming experience
    Familiar with Linux operating system

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    GNC algorithms Design and tune autopilots, guidance laws and navigation filters for guided weapons 4-5 Years Yes
    Hardware/software integration 4-5 Years Yes

    Special Needs
    There is No Special Needs For this Requirement
     
    Job Number: DW-1075
    Job Location: Grand Prairie, TX
    Rate: 94/hr max
    Duration: 6 month contract
    Input Date: 06/28/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Guidance, Nav & Ctrl Eng - Level 3 with active secret TX

    Description:
    Guidance, Nav & Ctrl Eng - Level 3
    Description
    Radar Signal Processing engineer needed for fire control radar development program. Responsibilities will include defining waveforms, performing trade studies, defining radar signal processing requirements, testing signal processing software, supporting hardware and software integration, and interfacing with transmitter and receiver suppliers.
    Skill/Experience/Education
    Mandatory:

    Experience with radar signal processing algorithms, including MTI, PRI selection, acquisition and track logic, and pulse compression

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    RF signal processing algorithms Waveform design and algorithm development 4-5 Years Yes
    Simulation experience Digital simulation of radar system performance including signal processing algorithms 0-3 Years No

    Special Needs
    There is No Special Needs For this Requirement
     
    Job Number: DW-1160
    Job Location: Grand Prairie, TX
    Rate: 79.50/hr max
    Duration: 6 month contract
    Input Date: 06/28/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Hadoop Developer

    Description:
    Job Description:
    Responsible for design, development and delivery of data from operational systems and files into ODSs (operational data stores), downstream Data Marts and files.
    Troubleshoot and develop on Hadoop technologies including HDFS, Hive, Pig, Flume, HBase, Spark, Impala and Hadoop ETL development via tools such as Informatica,
    Translate, load and present disparate data sets in multiple formats and multiple sources including JSON, Avro, text files, Kafka queues, and log data
    Will implement quality logical and physical ETL designs that have been optimized to meet the operational performance requirements for our multiple solutions and products, this will include the implementation of sound architecture, design, and development standards.
    Has the experience to design the optimal performance strategy, and manage the technical metadata across all ETL jobs.
    Responsible for building solutions involving large data sets using SQL methodologies, Data Integration Tools like Informatica in any Database preferably in an MPP platform.
    Has strong Core Java Programming experience to apply in Data Integration.
    Works with BA’s, end users and architects to define and process requirements, build code efficiently and work in collaboration with the rest of the team for effective solutions.
    Deliver projects on-time and to specification with quality.

    Skill Sets Required:
    8 years’ experience in managing data lineage and performing impact analyses.
    5 years’ experience with ETL tool development
    4 years’ experience with Hadoop Eco System
    Experience working in Data Management projects.
    Experience working in Hive or related tools on Hadoop, Performance tuning, File Format, executing designing complex hive HQL’s, data migration conversion.
    Experience working with Spark for data manipulation, preparation, cleansing.
    Experience working with ETL Tools ( Informatica/DS/SSIS) for data Integration
    Experience designing and developing automated analytic software, techniques, and algorithms
    Ability to handle multiple tasks and adapt to a constantly changing environment
    Self-starter with the ability to work independently and take initiative. Ability to translate ideas and business requirements into fully functioning ETL workflows.
    Strong analytical and problem solving skills.
    Excellent written and oral communication skills, with the ability to articulate and document processes and workflows for use by various individuals of varying technical abilities.
    Excellent organizational skills.
    Knowledge of HealthCare a plus.
    Minimum Education:
    MS/BS in Computer Science, Information Systems, or related field preferred and/or equivalent experience
    Ability to apply mastery knowledge in one of the relational data base (DB2, MSSQL, Teradata, Oracle 8i/9i/10g/11i)
    Ability to apply mastery knowledge in one of the Data Integration Tools (Informatica, SSIS.)
    Expert ability and hands on experience in SQL and Core Java a must
    Experience with Unix/Linux and shell scripting.
    Ability to demonstrate experience in distributed UNIX environments
    Ability to work both independently and in a collaborative environment
    Excellent problem solving skills, communication skills and interpersonal skills
    Ability to analyze information and use logic to address work related issues and problems
    Ability to demonstrate proficiency in Microsoft Access, Excel, Word, PowerPoint and Visio.• Ability to present to a group.
    Experience working in Agile, DevOps environment a plus.
    Experience or knowledge of web architecture, (Javascript, SOAP/XML, Weblogic, Tomcat) is a plus
    Experience with an ORM framework, SOA Architecture, Microservices is a plus.
    Experience with Middleware components (ESB, API Gateway) is a plus.


    Job Title: Senior/Lead Hadoop Developer
    Duration: 6 Months
    Location: Irving, TX 75038
     
    Job Number: 3200
    Job Location: Irving, TX
    Rate: $76.92/hr
    Per Diem: Possible
    Overtime: Possible
    Duration: 6+ months
    Start Date: ASAP
    Input Date: 06/06/2017
    Firm Name: OLSA RESOURCES INC
    Attention: Dina Matar
    Address: 3836 N BALLAST ST
    City, State: PORTLAND, OR 97217
    Phone: 503/608-7895
    Fax Phone: 503/608-7896
    Website: www.olsaresources.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Human Resources Support 2

    Description:
    Human Resources Support 2

    Location: Camden, AR
    Pay Rate: DOE ($12/hr - $15.67/hr)
    Duration: 4 month contract
    **MUST be a U.S. CITIZEN**

    Duties:
    •Handle sensitive and confidential information
    •Maintain employee records and prepare reports
    •Provides information and produces simple correspondence as required
    •Utilizes office equipment necessary for the completion of assigned tasks
    •Performs related duties as assigned

    Skills (Required):
    •Familiarity with a variety of concepts, office practices, filing systems, record keeping, policies and procedures associated with functional areas of Human Resources
    •Computer skills/systems and applicable software such as Microsoft Office, including Word, Excel, PowerPoint, etc
    •Filing Skills
    •Human resource administration
    •Employee records

    Desired:
    •Presentation Skills and or experience
    •College degree

    Education:
    -High School Diploma or equivalent and 2 years of related experience
     
    Job Number: 7419
    Job Location: Camden, AR
    Rate: 12-15.67
    Per Diem: No
    Overtime: Possible
    Duration: 4 mos
    Start Date: ASAP
    Input Date: 08/03/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Industrial Engineer II

    Description:
    Industrial Engineer II

    Location: Savannah
    Rate: $35.00 - $38.00/HR
    Duration: Long Term contract
    Shift: 1st Shift


    Unique Skills:
    * Shop floor layout (6S)
    * Maintenance ground support experience.


    Education and Experience Requirements:
    Bachelor’s degree in Industrial, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience. Proven knowledge of Lean and/or Six Sigma principles. Three (3) years Industrial Engineering, Manufacturing Engineering, or related technical experience. Ability to read and interpret blueprints and facility layouts. Ability to operate personal computers, CAD systems, and appropriate software.


    Position Purpose:
    Under minimal supervision, provides Industrial Engineering support through the application of classical and Lean Industrial Engineering principles. Assures assigned projects are accomplished within projected or approved cost.

    Principal Duties and Responsibilities:
    Essential Functions: 1. Perform all activities necessary to support assigned area, providing timely response to all requests. Assure assigned projects are accomplished within projected time and approved costs. 2. Prepare and submit necessary paperwork for equipment, machinery, and facilities acquisition including justifications and economic analysis. 3. Initiate and implement cost reduction programs. 4. Implement plant layout, process flow, and material handling techniques 5. Maintain and submit daily/weekly/monthly activity reports and project status. 6. Investigate, evaluate, and implement facilities expansions, department rearrangements, new technologies and manufacturing techniques, employee suggestions, and make-or-buy proposals. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of IE policies and procedures. 8. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 9. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 10. Support all Safety, Sustainability and Ergonomic initiatives as required.

    Additional Functions: 1. Develop and maintain work place methods and manpower requirements. 2. Assist in the training and development of entry-level industrial engineering personnel. 3. As required, aid in development and maintenance of Business Continuity Plan. 4. Perform other duties as assigned.
     
    Job Number: 7303
    Job Location: Savannah, GA
    Rate: $35.00 - $38.00/HR
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Input Date: 06/19/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Information System Security Officer (ISSO) with active secret FL

    Description:
    159671/7222476
    Job Title: Information System Security Officer (ISSO)
    Keywords:
    Number of Positions: 1
    Remaining Positions: 1
    Duties: ** An active SECRET (or higher) DoD Security Clearance is required **

    ** A current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP) is required **

    ** Candidates must be U.S. Citizens **

    ** Permanent residents are NOT eligible for this role **

    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    -The ISSO is responsible for ensuring the appropriate operational security posture is maintained for an information system (IS) and as such, works in close collaboration with the Information System Security Manager (ISSM).
    -The ISSO shall have the detailed knowledge and expertise required to manage the security aspects of an IS and is assigned responsibility for the day-to-day security operations of a system.
    -Responsibilities also include physical and environmental protection, personnel security, incident handling, and security training and awareness.
    -In close coordination with the ISSM, the ISSO plays an active role in monitoring a system and its environment of operation to include developing and updating the System Security Plan (SSP), managing and controlling changes to the system, and assessing the security impact of those changes.

    Responsibilities of the ISSO include, but are not limited to:
    a. Ensure systems are operated, maintained, and disposed of in accordance with security policies and procedures as outlined in the security authorization package;
    b. Attend technical and security training (e.g., operating system, networking, security management) relative to assigned duties;
    c. Ensure all users have the requisite security clearances, authorization, need-to-know, and are aware of their security responsibilities before granting access to the IS;
    d. Report all security-related incidents to the ISSM;
    e. Conduct periodic reviews of ISs to ensure compliance with the security authorization package;
    f. Serve as member of the CCB, if designated by the ISSM;
    g. Coordinate any changes or modifications to hardware, software, or firmware of a system with the ISSM prior to the change;
    h. Formally notify the ISSM when changes occur that might affect system authorization;
    i. Monitor system recovery processes to ensure security features and procedures are properly restored and functioning correctly;
    j. Ensure all IS security-related documentation is current and accessible to properly authorized individuals;
    k. Ensure audit records are collected and reviewed; and
    l. ISSO shall be adequately trained and possesses technical competence commensurate with the complexity of the ISs.
    Skills: Minimum Qualifications
    - Current SECRET (or higher) DoD Security Clearance
    - Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)
    - Experience with Microsoft Windows and/or Linux system administration (2+ years)
    - Familiarity with configuration control and change management (SCCM)
    - Experience with networking concepts (switches, network security, TACLANE)
    - Experience with security concepts (Data Loss Prevention, Active Directory, and Security Log Analysis)
    - Active and continuous learner - either higher education or Continuing Professional Education

    Required Competencies
    - Strong written and verbal communication skills; ability to present reports to management; motivated to thoroughly investigate, analyze, and document system issues and resolutions
    - Ability to produce quality deliverables and to complete assigned projects on time; provides consistent status updates to ensure IT security projects stay focused
    - Consistent attention to detail - completes tasks per standard operating procedures; reports discovered anomalies and inconsistencies
    - Persistent and creative problem solver - strong troubleshooting skills and determined to find solutions to technical problems; identifies root cause and presents possible solutions to management
    - Strong work ethic and a proven professional - respectful, dependable, takes initiative and follows through, dedicated to excellence and getting the job done

    Preferred Competencies
    - Operating System and networking certifications
    - Knowledge of and experience with compliance to government regulations and standards (NIST Special Publications, NISPOM, Risk Management Framework, etc.)
    - Direct experience with a Department of Defense (DoD) or Defense Industrial Base (DIB) company supporting critical information systems

    Additional Details
    The ideal candidate for this position must be able to:
    - Report to work on time
    - Perform job duties for a specific duration of time or within a given period of time
    - Follow directions based on government requirements and company policies
    - Interact well with co-workers and customers
    - Accept constructive criticism
    - Maintain regular/consistent attendance and a full-time schedule
    - Maintain current status on projects
    - Stay current on training requirements
    - Solve issues and incidents in the field and be willing to work after hours as needed to complete an urgent and important task
    - Effective service depends upon the contractors performing duties to the best of their abilities; frequent absences will disrupt business operations and create additional work for coworkers; prompt and regular attendance is critical to the success of the company's mission.

    Education: - Undergraduate degree in Information Technology or Cyber Security, but candidate with proven experience will not be excluded from consideration
    - Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)


    Skills: Required
    • CYBER SECURITY
    • LINUX
    Additional
    Languages: English( Speak, Read, Write )

    State/Province: Florida
    City/Town: Jupiter


    Start Date: 06/19/2017 Hours Per Week: 40.00
    Est. End Date: 12/30/2017 Hours Per Day: 8.00
    Schedule Notes: Days Per Week: 5.00
     
    Job Number: MB-7222476
    Job Location: Jupiter, FL
    Rate: 52/hr max
    Duration: 6 month contract
    Input Date: 08/02/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Information System Security Officer (ISSO) with active secret VA

    Description:
    159639/7213927

    Job Title: Information System Security Officer (ISSO)

    Number of Positions: 1
    Remaining Positions: 1
    Duties: ** An active SECRET (or higher) DoD Security Clearance is required **

    ** A current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP) is required **

    ** Candidates must be U.S. Citizens **

    ** Permanent residents are NOT eligible for this role **

    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    -The ISSO is responsible for ensuring the appropriate operational security posture is maintained for an information system (IS) and as such, works in close collaboration with the Information System Security Manager (ISSM).
    -The ISSO shall have the detailed knowledge and expertise required to manage the security aspects of an IS and is assigned responsibility for the day-to-day security operations of a system.
    -Responsibilities also include physical and environmental protection, personnel security, incident handling, and security training and awareness.
    -In close coordination with the ISSM, the ISSO plays an active role in monitoring a system and its environment of operation to include developing and updating the System Security Plan (SSP), managing and controlling changes to the system, and assessing the security impact of those changes.

    Responsibilities of the ISSO include, but are not limited to:
    a. Ensure systems are operated, maintained, and disposed of in accordance with security policies and procedures as outlined in the security authorization package;
    b. Attend technical and security training (e.g., operating system, networking, security management) relative to assigned duties;
    c. Ensure all users have the requisite security clearances, authorization, need-to-know, and are aware of their security responsibilities before granting access to the IS;
    d. Report all security-related incidents to the ISSM;
    e. Conduct periodic reviews of ISs to ensure compliance with the security authorization package;
    f. Serve as member of the CCB, if designated by the ISSM;
    g. Coordinate any changes or modifications to hardware, software, or firmware of a system with the ISSM prior to the change;
    h. Formally notify the ISSM when changes occur that might affect system authorization;
    i. Monitor system recovery processes to ensure security features and procedures are properly restored and functioning correctly;
    j. Ensure all IS security-related documentation is current and accessible to properly authorized individuals;
    k. Ensure audit records are collected and reviewed; and
    l. ISSO shall be adequately trained and possesses technical competence commensurate with the complexity of the ISs.
    Skills: Minimum Qualifications
    - Current SECRET (or higher) DoD Security Clearance
    - Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)
    - Experience with Microsoft Windows and/or Linux system administration (2+ years)
    - Familiarity with configuration control and change management (SCCM)
    - Experience with networking concepts (switches, network security, TACLANE)
    - Experience with security concepts (Data Loss Prevention, Active Directory, and Security Log Analysis)
    - Active and continuous learner - either higher education or Continuing Professional Education

    Required Competencies
    - Strong written and verbal communication skills; ability to present reports to management; motivated to thoroughly investigate, analyze, and document system issues and resolutions
    - Ability to produce quality deliverables and to complete assigned projects on time; provides consistent status updates to ensure IT security projects stay focused
    - Consistent attention to detail - completes tasks per standard operating procedures; reports discovered anomalies and inconsistencies
    - Persistent and creative problem solver - strong troubleshooting skills and determined to find solutions to technical problems; identifies root cause and presents possible solutions to management
    - Strong work ethic and a proven professional - respectful, dependable, takes initiative and follows through, dedicated to excellence and getting the job done

    Preferred Competencies
    - Operating System and networking certifications
    - Knowledge of and experience with compliance to government regulations and standards (NIST Special Publications, NISPOM, Risk Management Framework, etc.)
    - Direct experience with a Department of Defense (DoD) or Defense Industrial Base (DIB) company supporting critical information systems

    Additional Details
    The ideal candidate for this position must be able to:
    - Report to work on time
    - Perform job duties for a specific duration of time or within a given period of time
    - Follow directions based on government requirements and company policies
    - Interact well with co-workers and customers
    - Accept constructive criticism
    - Maintain regular/consistent attendance and a full-time schedule
    - Maintain current status on projects
    - Stay current on training requirements
    - Solve issues and incidents in the field and be willing to work after hours as needed to complete an urgent and important task
    - Effective service depends upon the contractors performing duties to the best of their abilities; frequent absences will disrupt business operations and create additional work for coworkers; prompt and regular attendance is critical to the success of the company's mission.

    Education: - Undergraduate degree in Information Technology or Cyber Security, but candidate with proven experience will not be excluded from consideration
    - Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)


    Skills: Required
    • CYBER SECURITY
    Additional
    Languages: English( Speak, Read, Write )

    State/Province: Virginia
    City/Town: Gainesville
    Address: 5731 Wellington Road


    Start Date: 06/05/2017 Hours Per Week: 40.00
    Est. End Date: 06/01/2018 Hours Per Day: 8.00
    Schedule Notes: Days Per Week: 5.00
     
    Job Number: MB-7213927
    Job Location: Gainesville, VA
    Rate: 67.50/hr max
    Duration: 12 month contract
    Input Date: 09/12/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Instrumentation Engineer

    Description:
    Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

    Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns.

    Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex mechanical systems, testing of electrical systems and components such as motor controllers, actuator controls, & system controllers. Capability of working independently and is self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.
     
    Job Number: CT36053
    Job Location: Windsor Locks, CT, CT
    Rate: 67.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 1 year
    Input Date: 06/06/2017
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Bill Carriveau
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Integration and Test Engineer - Level 2

    Description:
    Integration and Test Engineer - Level 2

    Location: Moorestown, NJ
    Rate: $55.00 - $57.00/HR
    6+ month contract
    1st Shift

    **Must have an active SECRET clearance**

    Description:
    - The candidate will perform the unit level test, engineering integration and test, engineering test & evaluation and support system level testing of COTS or custom computing hardware and real-time embedded signal processing firmware/software applications.
    - This engineer will be responsible for performing software/firmware development assignments from requirements through final testing.
    - This engineer will work with domain experts and military documentation to develop test software requirements, procedures, code and execute the tests.
    - This candidate will be responsible for designing and implementing system components using Object Oriented methods in C++.
    - This candidate should have an academic background and experience in: digital signal processing implementation, C/C++ programming, and simulation tools such as MATLAB.
    - The candidate must have excellent organizational skills, interpersonal skills and be able to communicate at both programmatic and technical levels with subordinates, peers, senior management levels and the customer.

    Skill/Experience/Education
    Mandatory:
    - BS Degree in Electrical Engineering or Electrical and Computer Engineering.
    - Minimum of 8 years of professional level experience testing hardware subassemblies, nests, cabinets and systems for functional and performance requirements.
    - Experience in testing digital signal processing hardware and real-time software applications using C++ Object Oriented design and programming.
    - Configuration management and change management experience using ClearCase, ClearQuest and UCM.
    - Must be able to obtain and maintain a DoD Secret level security clearance.

    Desired:
    Simulation tools experience such as Matlab.
     
    Job Number: 7085
    Job Location: Moorestown, NJ
    Rate: $55.00 - $57.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6+ mos
    Input Date: 06/19/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Level 3 NC Programmer

    Description:
    One year contract

    Wichita, KS

    1st shift
    •Provides numerical control, machining, and programming technical expertise to cross-functional engineering and manufacturing teams.
    •Establishes technical requirements for manufacturing and producibility.
    •Plans, creates, verifies, and revises machine control data and documentation that directs the operations for numerically controlled machines and robots required to manufacture and inspect parts, tools and assemblies.
    •Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, and software.
    •Apply knowledge of engineering data, geometric dimensioning and tolerancing, and machine control languages in order to plan, create and revise machine-control data and associated inspection plans.
    •Ability to create and revise measuring machine programs and/or computer generated solid models, statistical process-control graphic aids, in-process inspection graphic aids, and key characteristics media.
    •Ability to create and/or validate machine-control data, inspection point coordinate data and documentation.

    •Education/Requirements

    Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience

    AFP (automated fiber placement)

    CDG experience

    Catia V5

    3/5 axis

    Vericut

    MS Office

    Primary soft/hard metal programming experience

    SAP is helpful but not needed
     
    Job Number: 51722
    Job Location: Wichita, KS
    Duration: 12 months
    Input Date: 06/07/2017
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Becky Norman
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Fax Phone: 203/926-0082
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Material Handler NM

    Description:
    159640/7209393
    Job Title: Material Handler
    Keywords:
    Number of Positions: 1
    Remaining Positions: 1
    Duties: • Transports materials to or from storage to designated area. 60%
    • Counts, weighs, and records number of units of materials moved or handled on material forms. 5%
    • Reads shop order or follows oral instructions to ascertain materials or containers to be moved. 5%
    • Loads and unloads materials onto or from pallets, trays, racks, and shelves. 20%
    • Follows all safety policies and procedures.
    • Maintains the highest level of cleanliness and organization in responsible areas. 10%
    Skills: • Ability to use a computer and to learn business software
    • Ability to convert and accurately use various units of measure (sq. feet to inches, metric to English, etc.)
    • Experience working within an ISO controlled organization
    Physical Demands
    • Very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling and climbing all day
    • Frequently lifts or moves items over 50 pounds
    Required experience:
    • Material Handling: 1 year
    Education: High school diploma or general education degree (GED) preferred


    Skills: Required
    • MATERIAL HANDLERS
    • ISO
    • COMPUTER DATA ENTRY
    Additional
    • MATERIAL HANDLING
    • MATERIAL HANDLER
    Languages: English( Speak, Read, Write )

    State/Province: New Mexico
    City/Town: Socorro


    Start Date: 05/29/2017 Hours Per Week: 40.00
    Est. End Date: 12/29/2017 Hours Per Day: 10.00
    Schedule Notes: Days Per Week: 4.00
     
    Job Number: MB-7209393
    Job Location: Socorro, NM
    Rate: 12.50/hr max
    Duration: 6 month contract
    Input Date: 06/21/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer - Level 2

    Description:
    Mechanical Design Engineer - Level 2

    Location: Dallas, TX
    Rate: $50.00 - $60.00/HR
    6 month contract
    1st Shift

    **Must have a current ACTIVE secret clearance**

    Description
    - Mechanical Design Engineer to support the Tactical Missiles Advanced Programs (TMAP) area design effort.
    - Tasks will include conceptual and detail design of missile components, systems, and subsystems, and creation of 3D solid models and 2D drawings.
    - Effort will require coordination of design(s) with other mechanical / electrical disciplines, familiarity with Solid Rocket Motors (SRMs), SRM suppliers, booster separation systems, and tolerance analysis.
    - Must have Active Secret Clearance at time of submittal, preferably within the last 5 years. Please provide status of clearance on resume.


    Skill/Experience/Education
    Mandatory:
    - Candidate should have a Bachelors of Science degree in Mechanical Engineering, or 10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer / CREO 3.
    - Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, knowledge of Geometric Dimensioning and Tolerancing, and experience with manufacturing engineering and fabrication processes.
    - Familiarity with Microsoft Office applications is desired.
     
    Job Number: 6908
    Job Location: Grand Prairie, TX
    Rate: $50.00 - $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Input Date: 07/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Mechanical Engineer

    Description:

    PDS Tech, Inc. is seeking a Mechanical Engineer for a position located in Kansas City, MO. 
    Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

    The Client's organization has several open opportunities for Mechanical Engineers.  We are seeking engineers who are interested in supporting one or more of the following areas:  product engineering, process engineering, purchased product engineering, systems engineering and mechanical testing.  Job title will be commiserate with level of experience. 

     
    • Completes assignments and provides detailed instructions in the design and/or project management of new and current projects, products, programs, components, tools and acceptance equipment under technical guidance of higher level engineers or departmental management
    • Participates in establishing operating procedures on new products and components
    • Assists in the development of test procedures and performance of routine to moderately complex engineering evaluation tests, product and process capability studies, quality audits, product or project data reviews, and other engineering evaluation work
    • Evaluates opportunities for defect prevention based on standard or accepted solutions
    • Prepares evaluation reports, analyzes discrepancies, and makes recommendations for product, test equipment, procedures and manufacturing or operating processes that improve productivity and quality and reduce flowtime
    • Assists in the preparation of product or project definitions, manufacturing drawings and specifications, and test equipment designs
    • Defines and acquires tooling, gaging and other equipment necessary to manufacture parts and to assure product quality
    • Interacts with design agencies, suppliers and/or internal organizations such as the Integrated Supply Chain to assist in resolving design, development, production and acceptance issues
    • Provides technical assistance in appropriate assigned field
    • Evaluates and makes recommendations regarding technological advances that improve productivity and quality,reduce flowtime, and enhance operational surety
    • May perform other duties as required
    • Conducts activities in a safe and healthy manner and works in accordance with established ES&H requirements to ensure the protection of associates, the public, and the environment. Takes actions necessary to stop work when an unsafe condition or action is identified. Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

    Basic Qualifications: 
    • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
    • Bachelor of Science degree in Mechanical Engineering from an ABET accredited program or an equivalent ABET accredited engineering degree.
    • Minimum three (3) years of professional technical experience.
    • Proficiency in Microsoft Excel, Word and PowerPoint required

    Additional Qualifications: 

    • Hands-on experience with 3D design software like Creo or SolidWorks
    • Effective verbal, written and presentation skills
    • Knowledge of continuous improvement methodologies including Six Sigma
    • Previous experience in a manufacturing environment
    • Experience in engineering related administrative activities such as configuration management, financial reporting, product testing procedures & data entry preferred
    • Proven ability in decision making and organization, planning and problem solving skills
    • Ability to work under minimal supervision, with latitude for independent action and decision making.
    • Good people skills, ability to motivate teams to produce on-target and timely results.
    • Demonstrate project/program management via multiple priorities/projects
    • Ability to plan and organize, demonstrate excellent time management and support several projects at once
    • Willingness to travel on occasion

     
    Job Number: 1710068729
    Job Location: KS City, MO
    Duration: 6 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Tanya James
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JrH0AAK&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    N/C Programmer - Numerical Control Programmer (OR)

    Description:
    Provides numerical control, machining and programming technical experience for a Dual Spindle Dual Turret Lathe. Establishes technical requirements for manufacturing and producibility Dual Spindle Dual Turret Lathe. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for DMG Mori or Similar type numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment.

    AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience. Must have Catia V5 Experience. See attached brochure for specifics on type of machine that the candidate must be able to program for.
     
    Job Number: NCor
    Job Location: Portland, ORE
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 6+ Months
    Start Date: ASAP
    Input Date: 08/14/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    NC Programmer

    Description:
    Numerical Control Programmer 3

    Location: Portland, OR
    Duration: 6+ Months

    Job Description:
    Provides numerical control, machining and programming technical experience for a Dual Spindle Dual Turret Lathe. Establishes technical requirements for manufacturing and producibility Dual Spindle Dual Turret Lathe. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for DMG Mori or Similar type numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction.

    Education / Experience:
    - AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
    - Must have Catia V5 Experience.
    - See attached brochure for specifics on type of machine that the candidate must be able to program for.

    - Looking for CNC Programmer familiar with programming for DMG Mori Dual Spindle Dual Turret Lathes or very similar type machine.
    - Ideal candidate will be able to program this type of machine using Catia V5.
     
    Job Number: 17-10488
    Job Location: Portland, ORE
    Per Diem: Yes
    Duration: 6 months
    Start Date: Asap
    Input Date: 08/09/2017
    Firm Name: ICONMA LLC
    Attention: Mohamed Zoheb
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Website: iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    NC Programmer (KS)

    Description:
    Provides numerical control, machining, and programming technical expertise to cross-functional engineering and manufacturing teams. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies, and revises machine control data and documentation that directs the operations for numerically controlled machines and robots required to manufacture and inspect parts, tools and assemblies. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, and software. Apply knowledge of engineering data, geometric dimensioning and tolerancing, and machine control languages in order to plan, create and revise machine-control data and associated inspection plans. Ability to create and revise measuring machine programs and/or computer generated solid models, statistical process-control graphic aids, in-process inspection graphic aids, and key characteristics media. Ability to create and/or validate machine-control data, inspection point coordinate data and documentation.

    Requirements: Level 3

    Education/Experience:
    Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience

    1st Shift
    OT is NOT being worked at this time
    No travel involved
    No Per Diem

    SKILLS NEEDED:
    AFP experience
    CDG experience
    Catia V5
    3/5 axis
    Vericut
    MS Office

    Primary soft/hard metal programming experience
    SAP is helpful, but not needed

    FOSTER DESIGN'S BENEFITS:
    • Working for a 53-year old company
    • Minimum 6 Paid Holidays
    • Blue Cross Blue Shield – Group Medical Insurance Plan
    • MetLife – Long Term Disability Insurance
    • Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
    • Vacation Pay
    • Paid Weekly (Direct Deposit)
     
    Job Number: FD-511929KS
    Job Location: Wichita, KS
    Rate: $ BOE/HR
    Per Diem: No
    Overtime: No
    Duration: 11 Months
    Start Date: 06/09/2017
    Input Date: 06/22/2017
    Firm Name: FOSTER DESIGN INC
    Attention: Recruiter
    Address: 200 W DOUGLAS AVE STE 110
    City, State: WICHITA, KS 67202
    Phone: 316/832-9700
    800 Phone: 800/345-3394
    Fax Phone: 316/832-9357
    Website: www.fosterdes.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    NC Programmer (Catia)

    Description:
    Provides numerical control, machining and programming technical experience for a Dual Spindle Dual Turret Lathe. Establishes technical requirements for manufacturing and producibility Dual Spindle Dual Turret Lathe. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for DMG Mori or Similar type numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction.

    Candidate must state level of proficiency (beginner, intermediate or advanced) in the following required skills:
    Category Name Required Level
    Technical Skills Mill and Lathe Operations Yes Advanced
    Technical Skills Set-up and Operate Lathe and Milling Machine Yes Advanced

    AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience. Must have Catia V5 Experience. Looking for CNC Programmer familiar with programming for DMG Mori Dual Spindle Dual Turret Lathes or very similar type machine. Ideal candidate will be able to program this type of machine using Catia V5. Must be US Person for purposes of Export Compliance.
     
    Job Number: 38445
    Job Location: ORE
    Rate: 60/hour
    Per Diem: split
    Overtime: possible
    Duration: 6 months
    Start Date: asap
    Input Date: 06/09/2017
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Erica Price
    Address: WESTRIDGE OFFICE PARK
    2646 HIGHWAY 109 STE 207

    City, State: WILDWOOD, MO 63040
    Phone: 636/438-0312
    800 Phone: 866/277-3343
    Fax Phone: 636/220-8284
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    NC Programmer - Level 3 (KS)

    Description:
    Provides numerical control, machining, and programming technical expertise to cross-functional engineering and manufacturing teams. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies, and revises machine control data and documentation that directs the operations for numerically controlled machines and robots required to manufacture and inspect parts, tools and assemblies. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, and software. Apply knowledge of engineering data, geometric dimensioning and tolerancing, and machine control languages in order to plan, create and revise machine-control data and associated inspection plans. Ability to create and revise measuring machine programs and/or computer generated solid models, statistical process-control graphic aids, in-process inspection graphic aids, and key characteristics media. Ability to create and/or validate machine-control data, inspection point coordinate data and documentation.

    Education/Experience:
    Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience

    Location: Wichita, KS
    Duration: 6 Months
    1st Shift
    OT is being worked
    Not a lot of travel involved with this position.
    Possible travel to McAlester
    No Per Diem - local Talent Requested

    SKILLS NEEDED:
    Catia V5
    3/5 axis
    Vericut
    MS Office
    Primary soft/hard metal programming experience
    SAP is helpful

    FOSTER DESIGN'S BENEFITS:
    • Working for a 53-year old company
    • Minimum 6 Paid Holidays
    • Blue Cross Blue Shield – Group Medical Insurance Plan
    • MetLife – Long Term Disability Insurance
    • Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
    • Vacation Pay
    • Paid Weekly (Direct Deposit)
     
    Job Number: FD-494796KS
    Job Location: Wichita, KS
    Rate: $50/HR BOE
    Per Diem: possible split
    Overtime: Yes - Possible
    Duration: 6 Months
    Start Date: 7/7/2017
    Input Date: 07/12/2017
    Firm Name: FOSTER DESIGN INC
    Attention: Recruiter
    Address: 200 W DOUGLAS AVE STE 110
    City, State: WICHITA, KS 67202
    Phone: 316/832-9700
    800 Phone: 800/345-3394
    Fax Phone: 316/832-9357
    Website: www.fosterdes.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    NC Programmer - Level 3 (OK)

    Description:
    Provides numerical control, machining, and programming technical expertise to cross-functional engineering and manufacturing teams.

    Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies, and revises machine control data and documentation that directs the operations for numerically controlled machines and robots required to manufacture and inspect parts, tools and assemblies. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, and software. Apply knowledge of engineering data, geometric dimensioning and tolerancing, and machine control languages in order to plan, create and revise machine-control data and associated inspection plans.

    Ability to create and revise measuring machine programs and/or computer generated solid models, statistical process-control graphic aids, in-process inspection graphic aids, and key characteristics media. Ability to create and/or validate machine-control data, inspection point coordinate data and documentation.

    Education/Experience:
    Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience.

    1st Shift
    OT is, as needed
    No Travel associated with this position

    SKILLS NEEDED:
    SmartCam is required
    Strong 3/4 axis experience
    Catia V5 is helpful, but not required
    SAP is helpful, but not required

    FOSTER DESIGN'S BENEFITS:
    • Working for a 53-year old company
    • Minimum 6 Paid Holidays
    • Blue Cross Blue Shield – Group Medical Insurance Plan
    • MetLife LTD – Long Term Disability Insurance
    • Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
    • Vacation Pay
    • Paid Weekly (Direct Deposit)
     
    Job Number: FD-514529OK
    Job Location: McAlester, OK
    Rate: $BOE/HR
    Per Diem: Possible - Plus Possible Split
    Overtime: as needed
    Duration: 6-11 Months or possibly longer
    Start Date: 06/09/2017
    Input Date: 06/21/2017
    Firm Name: FOSTER DESIGN INC
    Attention: Recruiter
    Address: 200 W DOUGLAS AVE STE 110
    City, State: WICHITA, KS 67202
    Phone: 316/832-9700
    800 Phone: 800/345-3394
    Fax Phone: 316/832-9357
    Website: www.fosterdes.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    NC Programmers with DMG Mori Dual Spindle

    Description:
    Provides numerical control, machining and programming technical experience for a Dual Spindle Dual Turret Lathe. Establishes technical requirements for manufacturing and producibility Dual Spindle Dual Turret Lathe. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for DMG Mori or Similar type numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction.
     
    Job Number: BO-OR
    Job Location: Portland, ORE
    Rate: $62.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: 6 Months+
    Start Date: ASAP
    Input Date: 07/10/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    Network Administrator - CA

    Description:
    Strategy & Planning
    Perform network design and capacity planning. Develop, implement and maintain policies, procedures and associated training plans for network resource administration, appropriate use, and disaster recovery. Establish service level agreements with end users.

    Acquisition & Deployment
    Oversee installation, configuration, maintenance, and troubleshooting of campus and data center network infrastructures. Interact and negotiate with vendors, outsourcers, and contractors to secure network products and services. Conduct research on network products, services, protocols, and standards in support of network procurement and development efforts.

    Operational Management
    Work closely with the security team in managing network security solutions, including firewall, anti-virus, and intrusion detection systems. Manage all network hardware and software equipment including but not limited to switches, routers, console, physical and virtual appliances. Practice network asset management, including maintenance of network component inventory and related documentation and technical specifications information. Implement security best practices in managing the whole infrastructure. Monitor and test network performance and provide network performance statistics and reports. Recommend, schedule, and perform network improvements, upgrades, and repairs.

    Requirements
    College diploma or university degree in the field of computer science and/or 5 years equivalent work experience.
    Certifications in the Networking industry (e.g. CCNA, JNCIS).
    Certification in ITIL Foundation V3
    Working technical knowledge of network and PC operating systems, including Linux, BSD and Windows.
    Extensive use of programming knowledge to automate and manage the infrastructure
    Deep application support experience with RADIUS, NAC and Network Performance Monitoring solutions.
    Working technical knowledge of current network hardware, protocols, and standards, including but not limited to Ethernet, IPv4, IPv6 OSPF, BGP, LDP, MPLS, GRE and IPsec.
    Hands-on hardware troubleshooting experience.
    Good understanding of the organization's goals and objectives.
    Knowledge of applicable data privacy practices and laws.
    Managed and designed structured cabling infrastructures
    Working knowledge of IT Service Management practices

    Personal Attribute
    Strong written and oral communication skills.
    Strong interpersonal skills.
    Ability to conduct research into networking issues and products as required.
    Ability to present ideas in user-friendly language and visuals.
    Highly self-motivated and directed.
    Keen attention to detail.
    Proven analytical and problem-solving abilities.
    Ability to effectively prioritize and execute tasks in a high-pressure environment.
    Strong customer service orientation.
    Experience working in a team-oriented, collaborative environment.

    1st Shift

     
    Job Number: 162510
    Job Location: Los Angeles, CA
    Rate: $DOE
    Duration: 6+ months (Possible CTH)
    Input Date: 01/20/2018
    Firm Name: CHIPTON ROSS
    Attention: Max Cameron
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: mcameron@chiptonross.com
    Website: www.chiptonross.com

    On-Call Photographer 2- Secret Clearance

    Description:
    PDS Tech is seeking a candidate for the On-Call Photographer 2 position located in Redondo Beach, CA.  

    Photographer will operate a variety of standard and special-purpose still and/or video cameras in support of customer/company requirements. Coordinates and directs the execution of creative photographic assignments for advertising, news, publicity, and technical use. Serves as photographic representative with customers, news and trade publications, suppliers, and advertising agencies. Innovative professional with extensive knowledge of photographic equipment to support difficult field assignments, including specialty lighting. Ability to coordinate multiple assignments under stringent deadlines. Ability tocommunicate effectively with a diverse group of users; possess excellent customer service skills and demeanor.
    Basic Qualifications:
    • Advanced experience in Adobe PhotoShop and Lightroom.
    • Proficient in Adobe Premiere, graphics software, Acrobat, Microsoft Office, and digital archiving.
    • U.S. Citizenship required.
    • Continued employment contingent on applicant's ability to obtain DoD and SSBI clearances.
    • Travel may be required.
    • Overtime including evening or weekend support may be required.
    • Education: Bachelors in Photography plus 7 years minimum related work experience.


    Preferred Qualifications:

    •        Current Secret or Top Secret and SCI SSBI clearance preferred

     
    Job Number: 1710062336
    Job Location: Redondo Beach, CA
    Duration: 12 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: DJ Englert
    Address: 3130 S HARBOR BLVD STE 100
    City, State: SANTA ANA, CA 92704
    Phone: 714/540-7900
    800 Phone: 800/234-8644
    Fax Phone: 714/540-8092
    Email: cecjcostamesa@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G7IGAA0&URLSource=cjhunter

    On-Call Photographer 2- Secret Clearance

    Description:
    PDS Tech is seeking a candidate for the On-Call Photographer 2 position located in Redondo Beach, CA.  

    Photographer will operate a variety of standard and special-purpose still and/or video cameras in support of customer/company requirements. Coordinates and directs the execution of creative photographic assignments for advertising, news, publicity, and technical use. Serves as photographic representative with customers, news and trade publications, suppliers, and advertising agencies. Innovative professional with extensive knowledge of photographic equipment to support difficult field assignments, including specialty lighting. Ability to coordinate multiple assignments under stringent deadlines. Ability tocommunicate effectively with a diverse group of users; possess excellent customer service skills and demeanor.
    Basic Qualifications:
    • Advanced experience in Adobe PhotoShop and Lightroom.
    • Proficient in Adobe Premiere, graphics software, Acrobat, Microsoft Office, and digital archiving.
    • U.S. Citizenship required.
    • Continued employment contingent on applicant's ability to obtain DoD and SSBI clearances.
    • Travel may be required.
    • Overtime including evening or weekend support may be required.
    • Education: Bachelors in Photography plus 7 years minimum related work experience.


    Preferred Qualifications:

    •        Current Secret or Top Secret and SCI SSBI clearance preferred

     
    Job Number: 1710062333
    Job Location: Redondo Beach, CA
    Duration: 12 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: DJ Englert
    Address: 3130 S HARBOR BLVD STE 100
    City, State: SANTA ANA, CA 92704
    Phone: 714/540-7900
    800 Phone: 800/234-8644
    Fax Phone: 714/540-8092
    Email: cecjcostamesa@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G7I1AAK&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Palo Alto Firewall and/or Blue Coat Proxy Administrator

    Description:
    Active Secret Clearance Required. Serious inquiries only.

    Palo Alto Firewall and/or Blue Coat Proxy Administrator

    Duties:
    - Administer, manage, operate, maintain, install and configure 690 COG AOR network boundary devices and technologies.
    - Working with Communications Squadrons and other base-level authorities to maintain and administer security boundary components at locations IAW DoD and AF standards and guidance, using industry best practices
    - Changing, upgrading, and patching boundary devices requiring two-person compliance through established change management procedures
    - Participating in project management, planning, implementation and installation to ensure configuration and integration conforms to baseline architecture
    - Identifying potential threats
    - Managing resolution of security violations
    - Maintaining and operating Intrusion Prevention Systems (IPS)
    - Troubleshooting and correcting IPS induced service issues
    - Maintaining physical infrastructure to include troubleshooting and operating system patching
    - Granting and restricting administrative access to boundary devices according to authorization rules
    - Working with communication units to maintain and administer security boundary components at locations IAW DoD and AF standards and guidance
    - Identifying potential threats and managing resolution of security violations
    - Monitoring and troubleshooting intrusion prevention boundary devices using Government provided toolsets (such as SCOM, SolarWinds, SMARTS and NETCOP/NETCOOL)
    - Monitoring network boundaries to provide intrusion detection, identification, and internal/external IT threat analysis
    - Preserving, protecting, recovering and reconstituting friendly cyberspace capabilities before, during and after network attacks
    - Making changes/upgrades/patches to boundary devices requiring two-person compliance through established change management procedures
    - Responding to and accomplishing change request actions and documenting changes, upgrades, patches
    - Responding to outages and resolving and documenting priority incident tickets
    - Accomplishing network maintenance during the Government-prescribed maintenance windows
    - Troubleshooting web connectivity problems
    - Granting and restricting administrative access to boundary devices according to authorization rules
    - Installing, configuring, operating, maintaining, monitoring, administering, and troubleshooting of network and network defense technologies (e.g., firewalls, application-based firewalls, intrusion detection systems, web proxy devices and servers, and associated software)
    - Participating in project management, planning, implementation and installation to ensure configuration and integration conforms to baseline architecture
    - Making changes, upgrades, and patches to boundary devices requiring two-person compliance through established change management procedures

    Please Note: Shift work is possible.

    Bachelors Degree in Computer Science or a related technical discipline, or the equivalent combination of education, technical certifications or training, or work experience.

    5-8 years of directly related experience in systems administration and analysis.

    Requirements:
    - Current 8570 IAT II Level Certification (CNA-Security, GICSP, GSEC, Sec+ CE, SSCP) or higher
    - Experience working with Palo Alto Firewalls and/or Blue Coat Proxies

    Desired Experience/Certifications:
    - Blue Coat Certified Professional
    - Certified Infoblox Core Administrator (CICA)
    - Red Hat Certified System Administrator (RHCSA)
    - Blue Coat Certified Administrator
    - CompTIA Linux+
    - Palo Alto Accredited Configuration Engineer (ACE)
    - SolarWinds Certified Professional
    - Wireshark Certified Network Analyst (WCNA)
     
    Job Number: 17-28174
    Job Location: Colorado Springs, CO
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: 6 mos
    Start Date: ASAP
    Input Date: 06/08/2017
    Firm Name: NESCO RESOURCE
    Attention: Kevin
    Address: 101 COMMERCE ST STE 3001
    City, State: LAKE MARY, FL 32746
    Phone: 407/710-8000
    Fax Phone: 407/710-8001
    Website: www.nescoresource.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Process Improvement Analyst / Quality / CMMI Six Sigma SAP Oracle Access Sharepoint CA

    Description:
    Job Title: Process Improvement Analyst
    Job Number: 159266/12198
    Location: San Diego, CA
    Compensation: DOE
    Assignment Length: contract

    Description:


    • General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

    • We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

    • We have an exciting opportunity for a Process Improvement Analyst, specializing in software processes. This person will Support integrated teams to measurably enhance overall business practices including, but not limited to: Lessons Learned, Measurement & Analysis, Business Process Improvement initiatives, Lean Manufacturing concepts and Structured Problem Solving.

    DUTIES AND RESPONSIBILITIES:

    • Design and implement process improvement programs through collaboration with multiple disciplines to improve the company’s technical, cost and schedule performance through continuous improvement.

    • Develop and implement system improvements to maintain process excellence with particular emphasis on software process improvement.

    • Analyze improvement programs and potential results.

    • Establish and maintain performance metrics to measure program success and develop systems to regularly review metrics to improve processes.

    • Perform statistical analysis to identity issues and root causes and develop solutions to unusually complex problems.

    • Measure activities using different techniques, such as Lean/Six Sigma, etc.

    • Install process excellence supports for program governance, project reviews, communications, training, certifications and awards.

    • Coordinate with related business areas to ensure process improvements are successful across the company.

    • Develop process description documents, instructions and training material. Participate in training of personnel.

    • Serve as a consultant to management on major issues and provide updates on projects, goals, success criteria and results.

    • Work with integrated teams to measurably enhance overall business practices.

    • Provide direction, leadership and training to support staff or less experienced professional and technical staff.

    • Participate in creating a path forward to reaching CMMI level 3.

    • Participate in CMMI appraisals and AS9100 audits.

    • Maintains the strict confidentiality of sensitive information.

    • Performs other duties as assigned.

    • Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company. Expected to work in a safe manner in accordance with established operating procedures and practices.

    Qualifications Essential Qualifications

    • Typically requires a Bachelor's degree in a related field and ten or more years of progressive process improvement and/or quality work experience. Equivalent professional experience may be substituted in lieu of education.

    • Must demonstrate a broad understanding of process improvement practices, quality procedures and system requirements in an engineering and/or manufacturing environment; the ability to identify and interpret complex data; the ability to develop and present detailed statistical reports and documents; excellent interpersonal, verbal and written communication skills to explain complex information effectively with all levels of employees; excellent organization skills to maintain flow of work within the unit; the ability to establish priorities and meet deadline; and strong knowledge of computer operations and applications.

    • Ability to work both independently and lead in a team environment is essential as is the ability to work extended hours as required.

    Additional Qualifications

    •Typically requires a Bachelor’s degree in a related field such as Math, Business or a technical field, and ten or more years of quality systems and/or engineering experience working in a technical industry such as aerospace, semiconductor manufacturing, or communications. Equivalent professional experience may be substituted in lieu of education.

    • Must demonstrate a broad understanding of process improvement practices, quality procedures and system requirements in an engineering environment; the ability to identify and interpret complex data; the ability to develop and present detailed statistical reports and documents.

    • Formal training in CMMI for Dev V1.3 is desired

    • Project Management experience in acquiring a CMMI Level 3 rating for a company, is preferred

    • Knowledge of statistics and structured problem solving methods.

    • Green or Black Belt Six Sigma is desired.

    • Access, SharePoint, SAP and/or Oracle experience is desired.

    • Formal training in 6 Sigma and strong background in measurement and analysis development and reporting. Familiarity with software development, subcontract management, test, project engineering, and program management.

    • Excellent interpersonal, verbal and written communication skills to explain complex information effectively with all levels of employees.

    • Excellent organization skills to maintain flow of work within the unit.

    • The ability to establish priorities and meet deadline; and strong knowledge of computer operations and applications.

    • Ability to work both independently and lead in a team environment is essential as is the ability to work extended hours as required.
     
    Job Number: JE-12198
    Job Location: San Diego, CA
    Duration: 6 month contract
    Input Date: 06/19/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Procurement Engineer - Level 3

    Description:
    Procurement Engineer - Level 3

    Location: Tampa, FL
    Pay Rate: DOE ($25/hr - $45/hr)
    Duration: 6 month contract
    Shift: First, 5/40
    Travel: Yes; Lackland AFB San Antonio, TX
    ***MUST have an ACTIVE SECRET CLEARANCE***

    Description
    -Coordinates with Subcontract Management Team, Procurement Engineering Management, Systems Engineering, the Suppliers (CAE USA) and Industry experts to facilitate the design, production, test and qualification of aerospace and defense products.
    -Analyzes technical data, designs, preliminary specifications, manufacturing limitations, supplier facilities, and parts/equipment availability.
    -Investigates and recommends potential suppliers based on assessments of response to specifications, costs, inspection of facilities, and historical performance.
    -Facilitate technical trade-offs and standardization that may lead to more economical procurement.
    -Recommends design changes or process improvement to mitigate production issues.
    -Leads teams of Supplier and internal staff in collaboratively solving problems in Producibility, Quality, Inspection, Cost, Mistake-Proofing, Test, Reliability and Affordability while based in supplier facility and customer site.
    -Provides technical solutions to a wide range of difficult problems.
    -Solutions are imaginative, thorough, and practicable, and consistent with organization objectives.
    -Works under general direction only and independently determines and develops approach to solutions.
    -Work is reviewed upon completion for adequacy in meeting objectives.
    -Reports directly to the Lead Procurement Engineer on the C-5 program.
    -Provides surveillance and Quality Assurance direction to supplier while supporting the program needs.
    -Experience with requirements management and flowdown to supplier.
    -Reviews and approves Supplier Statements of Work (SSOW), technical specification, and supplier deliverables (SDRLs).
    -Onsite Quality Assurance representative on program assuring data trend analysis, lean practices, process improvement, operating procedure compliance, quality control, supplier surveillance, containment activity, supporting TKOs/RBATs/PACs, continuous improvement, configuration management, and root cause analysis following AS9100, ISO9001, ASQ, and CMMI.

    Skill/Experience/Education (MANDATORY):

    -Quality Assurance (4-5+ years experience)
    -Supplier Quality Assurance (4-5+ years experience)
    -Hardware Engineering (4-5+ years experience)
    -Test Verification/Validation (4-5+ years experience)
    -Configuration Management (4-5+ years experience)
    -ISO 9001: 2008 training (required)
    -AS9100C training (required)
    -Lockheed Martin Procure 2 Pay (P2P) training (required)
    -Auditor training (required)
    -Engineering or Technical 4-year Degree
    -Process Improvement
    -Purchase Orders
    -Physical and Software Configuration Audits
    -Source Inspections
    -QMS
    -Risk Assessment
    -ASQ
    -Corrective Action and Prevention
    -Reliability
    -Logistics
    -Excel


    Desired:
    -Subcontracts Management (0-3+ years experience)
    -Systems Engineering [aircraft avionics systems] (0-3+ years experience)
    -Green Belt/Black Belt Certification
     
    Job Number: 7345
    Job Location: Tampa, FL
    Rate: 25-45
    Per Diem: Split Possible
    Overtime: Yes
    Duration: 6 mos
    Start Date: ASAP
    Input Date: 11/14/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Product Data Management Engineer - SECRET

    Description:
    PDS is seeking a Product Data Management Engineer for an open position in Berkeley MO.  
    A Secret Clearance is required for this position.

    In your role, you will:

    1. Perform baselines using ClearCase and ClearQuest and create media for software installations and deliveries, and will be responsible for maintaining and tracking all media.

    2. Provide Configuration Management CDRL inputs to meet contractual requirements.

    3. Assist with the documentation of Configuration and Data Management standards, processes and tools.

    4. Track and report on Risks and Action Items Status.

    5. Works under general direction.
    Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering, computer science
     
    Job Number: 1710066288
    Job Location: Saint Louis, MO
    Per Diem: No
    Duration: 6 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021caKAAQ&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Product Data Management Engineer II (MO)

    Description:
    Training Systems and Government Services (TSGS) has a need for an experienced Product Lifecycle Management (PLM) engineer who will function in a Program environment in direct support of Product Lifecycle Management (PLM) activities.
    These PLM activities are focused on tasks associated with Configuration Change Board (CCB) facilitation, software and hardware configuration management, and data configuration management. The successful candidate will perform the following tasks.
    She/he will:
    1. Perform baselines using ClearCase and ClearQuest and create media for software installations and deliveries, and will be responsible for maintaining and tracking all media.
    2. Provide Configuration Management CDRL inputs to meet contractual requirements.
    3. Assist with the documentation of Configuration and Data Management standards, processes and tools.
    4. Track and report on Risks and Action Items Status.
    5. Works under general direction.

    Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering
     
    Job Number: ProdDMgmtMO
    Job Location: Berkeley, MO
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 6+ Months
    Start Date: ASAP
    Input Date: 08/14/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    Production Planner

    Description:
    PDS Tech, Inc. is seeking Production Planner in Kilgore, TX. 

     Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling, by performing the following duties:
     
    This job family has 5 qualification levels:
    Engineer-Manufacturing 1
    Engineer-Manufacturing 2
    Engineer-Manufacturing 3
    Engineer-Manufacturing 4
    Engineer-Manufacturing 5

    Essential Duties and Responsibilities include the following. Other duties may be assigned.
    1. Know and follow general company and corporate policies and procedures.
    2. Know, understand, and follow department policies and procedures.
    3. Confers with management, engineering and other staff regarding manufacturing capabilities, production schedules and other considerations to facilitate production processes
    4. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
    5. Estimates production times, staffing requirements, and related costs to provide information for management decisions.
    6. Analyzes and plans work force utilization, space requirements, and workflow, and designs layout of equipment and workspace for maximum efficiency.
    7. Confers with planning staff concerning product tooling to ensure efficient production methods
    8. Confers with vendors to determine product specifications and arrange for purchase of equipment, materials or parts and evaluates products according to specifications and quality standards
    9. Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
    10. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.
    11. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
    12. Consults customer specification documents to develop operations routing for all manufactured products.
    13. Other various duties as needed or as assigned.

    Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
     
    Education and/or Experience
    -High school diploma or general education degree (GED);
    -Six months to one year related experience and/or training; or equivalent combination of education and experience.
     
     
    Computer Skills
    To perform this job successfully, an individual should possess basic computer proficiency and functional knowledge with applications and activities including (but not limited to):
    -MasterCAM
    -Syteline Manufacturing software
    -Microsoft Project Management software
    -Microsoft Excel Spreadsheet software
    -Microsoft Word Processing software
     
    Language Skills
    -Ability to read and write the English language.
    - Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. 
    -Ability to write reports, business correspondence, and procedure manuals. 
    -Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
     
     
    Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

    While performing the duties of this Job, the employee is frequently required to sit.  The employee is occasionally required to stand; walk; use hands to finger, handle, or feel and reach with hands and arms. The employee must occasionally lift and/or move up to 10 pounds. 
     
    Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.   
     
    Work is generally performed in a climate controlled office environment. Occasionally exposed to a climate-controlled manufacturing environment with moderate to high levels of noise.
     
    5+ years experience working in production planning in an Aerospace production environment.
     
    • PRODUCE  MASTER FILES PER CUSTOMER REQUIREMENTS
    • STRONG WORKING KNOWLEDGE OF UNDERSTANDING BLUEPRINT DEFINITIONS
    • ERP KNOWLEDGE AND UNDERSTANDING  ALL AREAS OF THE SYSTEM OF VISUAL
    • USING MICROSOFT PRODUCTS FOR DAILY JOB TASKS
    • KNOWLEDGE IN AIRCRAFT SPECIFICATIONS
    • REVIEW P.O’s  TO BE CORRECT TO QUOTATIONS SUBMITTAL FOR JOB
    • A WORKING KNOWLEDGE OF CATIA SOFTWARE FOR PLANNING PURPOSES
    • INVENTORY AND MATERIAL MANAGEMENT
    • REVIEW SPECIFICATIONS REVISION’S FOR CUSTOMER REQUIREMENTS
    • UPDATE PLANNING AND MASTER FILES
    • REVIEW QUALITY REWORK ISSUES FOR SUB-CONTRACT P.O’s

     
    Job Number: 1710066639
    Job Location: Kilgore, TX
    Duration: 4 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Enrique Perez
    Address: 3201 CHERRY RIDGE DR STE A103
    City, State: SAN ANTONIO, TX 78230-4824
    Phone: 210/524-1496
    800 Phone: 866/570-1503
    Email: cecjsanantonio@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021jyvAAA&URLSource=cjhunter

    Program Manager - Propulsion System

    Description:
    This position is located in Nagoya, Japan.

    Designated Engine and Software Engineering Manager for Propulsion System Team, Aircraft Integration Department, Engineering Division
     
    The responsible Engineer will work and lead activities of the Engine and Software. This will include interfacing with other aircraft functions and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft Engine and FADEC Software. This role requires interface with multiple suppliers and integration of the aforementioned systems to the aircraft;

    Scope of Work:
    1. This Manager will work as a team member of Unit 3 (Propulsion).
    2. Basic work scope is to develop and finalize MRJ-200 (MRJ-90) T/C design, compliant to all applicable Engine and Software activities.
    3. This activity includes;
      1. Evaluating the current aircraft design, with respect to compliance to the Engine and Software related airworthiness regulations of JCAB, FAA and EASA.
      2. Coordinating integration of design change activities originated from Powerplant and Fuel System requirements when required,
      3. Presenting and discussing the Engine and Software compliance with the Transport Authorities.
      4. Leading verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.
      5. Managing aspects of Software verification of FADEC integration
      6. Overseeing integration of 14 CFR Part 33 compliance for meeting of the Aircraft (14 CFR Part 25) certification requirements.
      7. Managing the relationship of the department with the Engine supplier and tracking the activities of the Engine supplier to ensure timely certification and integration into the aircraft.
      8. Oversight of Systems Safety, Avionics, Electrical, Mechanical Systems and other departments’ integration and inputs and outputs for FADEC integration.

    4. All tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, technical calculation, interface discussion with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
    5. Lead and Determine methods of compliance for Engine Integration and Software compliance activities and work with suppliers and unit members to establish the consensus best practice for system final design and certification.
    6. Education of MITAC members about professional knowledge on the Engine Integration and Software.
    7. Manage the technical contract requirements with applicable Engine Integration and Software suppliers and other interfacing suppliers as appropriate.
    8. Provide expertize to assist in resolving the Engine Integration and Software performance during any rig testing or Flight testing.

    • 10+ years experience 
    • Bachelors Degree in Engineering
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610044918
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chad Dunavant
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i5000000037FPAAY&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Program Planner

    Description:
    Program Planner Sr. – This individual prepares, coordinates and maintains plans and schedules for software group using Agile methodologies.

    Individual will follow Agile Earned Value Management (EVM) guidebook to lead software team in building a successful, achievable Agile IMS schedule.

    Individual will communicate schedule impacts and propose corrective actions to applicable stakeholders. Additionally, this individual will formulate and recommend corrective action measures such as schedule revisions, manpower adjustments, fund allocations, and work requirements where necessary.

    This Sr. Program Planner will work to develop an integrated plan bringing Program Planning and Agile planning together into an integrated schedule.

    The following basic qualifications are required: A Bachelor’s degree from an accredited college in a related discipline, or equivalent experience/combined education is required; experience with MS tools suite, including MS Project; experience using Agile management tools in support of Earned Value Management (EVM) or similar system; trained in Agile development techniques; and understands basic concepts of Program Management and ability to interact with peers and management.

    Desired skills are experience with Fast Track, MS tool suite, and Agile management tools such as JIRA or VersionOne software.
     
    Job Location: Littleton, CO
    Input Date: 06/15/2017
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: GCP Recruiter
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Program Planning & Scheduling Analyst I

    Description:
    Program Planning & Scheduling Analyst I
    Savannah, GA
    Long Term Contract
    $30.00/Hr

    Unique Skills:
    Experienced with Aircraft Maintenance Scheduling: Scheduled Maintenance, Modification Period Scheduling, Flying Schedule, Flying Schedule effectiveness and Time Change component scheduling.

    Education and Experience Requirements:
    Bachelors Degree in Industrial Engineering, Business Administration, or related curriculum, or an equivalent combination of education and experience to successfully perform the essential functions of the job. Two (2) years formal scheduling experience. Requires proven experience with PC based software such as MS Excel, Project, Access, Word and Power Point. Experience with resource loaded plans desired.

    Position Purpose:
    Under general supervision gathers given information, organizes and produces schedules, program plans, financial and resource plans, and other duties needed to support assigned programs. Responsible for supporting the team with resource loaded plans and forecast analysis as required.

    Principal Duties and Responsibilities:

    Essential Functions: 1. Produce resource loaded schedules and/or financial operations of assigned programs with gathered activities, hours, and budget. 2. Produce recovery plans as requested using given information. 3. Utilize tools provided for collecting and maintaining program analysis and detail level data. 4. Prepare status reports and forecasts for assigned programs. 5. Responsible for preparing and maintaining schedules at all levels in support of assigned projects/programs.

    Additional Functions: 1. Perform other duties as assigned.
    Languages Required (in addition to English): English
     
    Job Number: 7074
    Job Location: Savannah, GA
    Rate: 30.00
    Per Diem: $110/Weekly, Split
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 10/23/2017
    Firm Name: INCONEN CORPORATION
    Attention: Brad
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Project/Systems Engineer (Weapons)

    Description:
    Job Responsibilities:

    -Perform System Engineering activities for Weapons Integration on Unmanned Aircraft (UA) programs.
    -Develop Interface Control Documents, Software Requirement Specifications, Performance Specifications, presentations and review test plans/procedures.
    -Perform system analysis, generate requirements, and develop system designs.
    -Support the development of test plans and manage the integration, verification and validation of weapons through flight test.
    -Devise new approaches to resolve unusual or complex engineering problems.
    -Troubleshoot conflicting design/development requirements, difficult coordination requirements, and special material requirements.
    -Coordinate and interface with customers, contractors, and engineering groups assigned to projects.
    -Develop program plans, estimates, and schedules.
    -Develop and present technical material to engineering and management groups as well as customers.
    -Support operation of engineering systems and document any issues.
    -Provide support for proposals/white papers.
    -Represent company at technical reviews, meetings and system level integrations.
    -Provide direction to design or technical staff and may lead a team of moderately experienced professional staff.
    -Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals.
    -Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
    -Expected to work in a safe manner in accordance with established operating procedures and practices.
    -Exercise a thorough understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.
    -Develop and communicate new concepts; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems.

    Basic Hiring Criteria:
    -Bachelor’s Degree
    -Active Secret Clearance (or ability to obtain one)

    Desired Qualifications:
    -Experience in one or more of the following areas is highly desired: Data Links, Integration, Weapons Development/Integration, Electronic Warfare, Requirements Development.
    -Experience with Tactical Data Link (TDL) or Net Enabled Weapon (NEW) architecture and design is desired.
    -Experience in Foreign Military Sales (FMS) programs is desired.
    -A Professional Engineering License, original work(s) published in professional engineering journals, and/or invited to present one or more original works to an engineering symposium are desirable.
     
    Job Number: 23620
    Job Location: San Diego, CA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 06/19/2017
    Firm Name: TAD PGS INC
    Attention: Mike Milligan
    Address: 12062 VALLEY VIEW ST STE 108
    City, State: GARDEN GROVE, CA 92845
    Phone: 714/622-3967
    800 Phone: 800/261-3779
    Fax Phone: 714/897-8455
    Website: www.tadpgs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Quality Assurance Engineer III

    Description:
    Quality Assurance Engineer III
    Tulsa, OK
    Rate: $50

    Unique Skills:

    Required:10+ years Quality Engineering shop floor experience in an aviation manufacturing environment; ability to interrogate 3D models using Catia V5. Highly preferred: 5+ years experience in composite manufacturing (hand layup and/or Auto Fiber/Tape Laying equipment) and assembly processes. Position will be located in Tulsa OK.


    Education and Experience Requirements:

    Bachelors degree in Engineering, aviation sciences, quality systems or related field; or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years quality assurance/control, manufacturing operations and/or military operations experience is required.

    Position Purpose:

    Performs Quality Assurance Engineering assignments requiring independent evaluation, selection, and application of standard Quality Engineering techniques, procedures, and criteria using judgment and ingenuity in making adaptations and modifications. Tasks are performed on medium, moderately complex contracts requiring independent execution within a defined set of skills or knowledge area without help or coaching from others. In working with senior level Quality Assurance Engineers, individuals may be exposed to higher level skills that may require help or coaching from others.

    Principal Duties and Responsibilities:

    Essential Functions: 1. Actively identifies and completes process improvement projects related to achieving improved quality or efficiency within their area of responsibility. 2. Monitors workflow and progress and ensures that standards/expectations are met; assist Coordinators in resolving issues. 3. Interprets and executes company policies and procedures; develops new procedures as required. 4. Develops processes to identify, analyze and correct quality trends. 5. Maintains KPIs for the MRB process to demonstrate process effectiveness and improved efficiency. 6. Promotes, encourages and leads employees towards a continuous improvement culture. 7. Serves as QA customer interface for various oversight activities. 8. Performs Quality Engineering activities using defined software tools and applications such as MiniTab. 9. Proficient in the use of inspection tools and techniques. 10. Performs quality planning activities including Quality Plans, QADs and Inspection Plans as required by the assigned project(s). 11. Participates in process improvement activities through monitoring, root cause investigations, auditing, failure analysis, etc. 12. Participates in CDRL development, review and delivery to the customer as required by the assigned project(s). 13. Assists in gauging and calibration activities as necessary. 14. Assists in developing fabrication/build processes and standards. 15. Participates in MRB disposition activities. 16. Performs QA estimating for small to medium, less complex projects.

    Other Requirements: 1. An Airframe & Powerplant (A&P) License may be used in combination with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement. 2. ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred. 3. Advanced degree in engineering or related curriculum preferred. 4. Maintain an up to date knowledge in the areas of Quality Assurance, Regulatory Compliance, Design Controls, Risk Management, and Statistical Techniques. 5. Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5. 6. Ability to define problems, collect data, establish facts, and draw valid conclusions. 7. Aerospace industry experience preferred. 8. Demonstrated experience and knowledge of FAA regulations, CATIA and Solumina preferred. 9. Knowledgeable of manufacturing processes. 10. Lean/Six Sigma certification as a green belt preferred. 11. Excellent communication and interpersonal skills required. 12. Proficient computer skills.
     
    Job Number: 7513
    Job Location: Tulsa, OK
    Rate: $50
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 06/29/2017
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Quality Assurance Engineering III

    Description:
    UNIQUE SKILLS
    Required: 10+ years Quality Engineering shop floor experience in an aviation manufacturing environment; ability to interrogate 3D models using Catia V5. Highly preferred: 5+ years’ experience in composite manufacturing (hand layup and/or Auto Fiber/Tape Laying equipment) and assembly processes. Position will be located in Tulsa OK.

    EDUCATION AND EXPERIENCE REQUIREMENTS
    Bachelor’s degree in Engineering, aviation sciences, quality systems or related field; or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years quality assurance/control, manufacturing operations and/or military operations experience is required.

    POSITION PURPOSE
    Performs Quality Assurance Engineering assignments requiring independent evaluation, selection, and application of standard Quality Engineering techniques, procedures, and criteria using judgment and ingenuity in making adaptations and modifications. Tasks are performed on medium, moderately complex contracts requiring independent execution within a defined set of skills or knowledge area without help or coaching from others. In working with senior level Quality Assurance Engineers, individuals may be exposed to higher level skills that may require help or coaching from others.

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Actively identifies and completes process improvement projects related to achieving improved quality or efficiency within their area of responsibility.
    2. Monitors workflow and progress and ensures that standards/expectations are met; assist Coordinators in resolving issues.
    3. Interprets and executes company policies and procedures; develops new procedures as required.
    4. Develops processes to identify, analyze and correct quality trends.
    5. Maintains KPIs for the MRB process to demonstrate process effectiveness and improved efficiency.
    6. Promotes, encourages and leads employees towards a continuous improvement culture.
    7. Serves as QA customer interface for various oversight activities.
    8. Performs Quality Engineering activities using defined software tools and applications such as MiniTab.
    9. Proficient in the use of inspection tools and techniques.
    10. Performs quality planning activities including Quality Plans, QADs and Inspection Plans as required by the assigned project(s).
    11. Participates in process improvement activities through monitoring, root cause investigations, auditing, failure analysis, etc.
    12. Participates in CDRL development, review and delivery to the customer as required by the assigned project(s).
    13. Assists in gauging and calibration activities as necessary.
    14. Assists in developing fabrication/build processes and standards.
    15. Participates in MRB disposition activities.
    16. Performs QA estimating for small to medium, less complex projects.

    OTHER REQUIREMENTS
    1. An Airframe & Powerplant (A&P) License may be used in combination with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement.
    2. ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred.
    3. Advanced degree in engineering or related curriculum preferred.
    4. Maintain an up to date knowledge in the areas of Quality Assurance, Regulatory Compliance, Design Controls, Risk Management, and Statistical Techniques.
    5. Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5.
    6. Ability to define problems, collect data, establish facts, and draw valid conclusions.
    7. Aerospace industry experience preferred.
    8. Demonstrated experience and knowledge of FAA regulations, CATIA and Solumina preferred.
    9. Knowledgeable of manufacturing processes.
    10. Lean/Six Sigma certification as a green belt preferred.
    11. Excellent communication and interpersonal skills required.
    12. Proficient computer skills.
     
    Job Number: 17-732-101061
    Job Location: Southeast
    Rate: $50.00/per hr.
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 06/23/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    Quality Engineer

    Description:
    PDS Tech, Inc. is seeking a Quality Engineer with composites experience in Hazelwood, MO. 

    Job Purpose


    This position will provide day-to-day focus on the proper execution of actions necessary for the on-time delivery and first time quality of products and services. To provide technical and administrative leadership to ensure that performance and quality of products conform to established company, international and governmental regulatory standards, agency guidelines, and customer requirements by implementing and maintaining quality assurance policies, processes, procedures and controls.

    Principal Accountabilities



    • Product Quality
    • Ensure that Quality Plans are current, and being executed for the programs assigned
    • Ensure that Quality Plans and supporting documentation such as Inspection Points, Statistical Process Control Plans, etc are in place and being used to measure and monitor key process/product characteristics and interfaces
    • Ensure that issues affecting product quality have effective corrective actions/micro plans in place that will result in resolution or risk mitigation plans are in place that will minimize product quality impact
    • Monitor the fidelity of associated inspection procedures to customer requirements and program specific quality plans
    • Ensure that plans/processes are in place and executed to minimize or eliminate product escapes
    • Ensure that corrective actions have data and data analysis to effectively identify root cause, containment, interim and long term corrective action planning and decisions, as well as quantifiable verification and monitoring exit criteria
    • Analyze and provide material review dispositions for non-conforming materials, parts, and equipment.
    • Program Quality
    • Serve as point of contact with the Quality Manager for program progress and monitoring. 
    • Support efforts to ensure overall customer satisfaction relative to current project or product and prospective follow-on business.
    • Participate in the creation of operational/program plans and/or procedures and coordinate with customer and supplier representatives to ensure satisfactory quality system performance.
    • Participate in the administration of program and project activities and processes.
    • Identify necessary quality resources to achieve organizational goals and objectives.
    • Perform and lead specialized quality functions as contract evaluation and planning; data preparation, analyzes and reporting; development of quality tools, techniques and methods; process improvements; maintenance of accountability and configuration of deliverable products and records; special investigations and audits: material review support; preventive and corrective actions; customer interface, liaison and support; product delivery; and audit of manufacturing and test data for quality system requirements.
    • Quality and Mission Success
    • Resolve issues at department/program level.
    • Test and recommend products, processes, software, equipment and measurement systems. 
    • Provide technical expertise to company employees, suppliers, customers and regulatory agencies to ensure compliance with contractual, company, and regulatory requirements.
    • Facilitate problem solving activities and events
    • Provide education and coaching on the company’s quality system to program and process team mates.
    • Make recommendations that affect quality, products, processes and costs.

    DOD Secret Clearance is required with an investigation within the past 5 years.

    Education

    • Bachelor’s Degree in Engineering or related discipline required. Combination of education and relevant experience may be considered in lieu of degree.

     
    Experience and Qualifications

    • Five years of experience in quality required.


    • Will have a fundamental understanding of quality philosophies, principles, systems, methods, tools, standards, organizational and team dynamics, customer expectations and satisfaction, supplier relations and performance, leadership, training, interpersonal relationships, improvement systems and professional ethics.
    • Will have a fundamental understanding of a quality system and its development, documentation and implementation to domestic and international standards or requirements.
    • Will have a basic understanding of the audit process including types of audits, planning, preparation, execution, reporting results and follow-up.
    • Will be able to develop and implement quality programs, including tracking, analyzing, reporting and problem solving.
    • Will be able to plan, control and assure product and process quality in accordance with quality principles, which include planning processes, material control, acceptance sampling and measurement systems.
    • Will have basic knowledge of reliability, maintainability, and risk management, including key terms and definitions, modeling, systems design, assessment tools and reporting.
    • Will have a thorough understanding of problem-solving and quality improvement tools and techniques. This includes knowledge of management and planning tools, quality tools, preventive and corrective actions, and how to overcome barriers to quality improvements.
    • Will be able to acquire and analyze data using appropriate standard quantitative methods across a spectrum of business environments to facilitate process analysis and improvements.
    • Superb written, communication interpersonal and leadership skills.

     

    • Computer literate in Excel, Word, Access, Project and PowerPoint.

     
    Job Number: 1610051112
    Job Location: Hazelwood, MO
    Duration: 12 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Gus Sanchez
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydBuAAI&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    RF Verification Engineer

    Description:
    L3 Cincinnati Electronics is currently looking for an experienced RF Verification Engineer to join our Design Verification team. As a member of this team, you will perform requirements-based verification of RF designs used on Spacecraft and Launch Vehicles.
    The candidate will rely on knowledge of lifecycle verification and test methodologies to plan and drive verification activities across multiple projects.

    Essential Responsibilities:
    • Review and evaluate product requirements for testability
    • Synthesize customer needs and requirements into test plans and procedures
    • Develop creative early-verification solutions (rapid prototyping, simulation, etc.) to burn down technical risk early in development lifecycle
    • Perform formal verification tests and generate formal test reports
    • Plan, implement, test, document and maintain solutions for the integration and test of multiple projects

    Qualifications
    • Bachelors Degree in Electronics / Electrical Engineering or similar field of study
    • 5+ years demonstrated experience designing or testing RF designs (transceivers, transmitters, receivers, power amplifiers, etc.)
    • 2+ years demonstrated experience creating detailed test plans, test procedures, test requirements and/or requirements verification matrices
    • 5+ years of hands-on experience testing and troubleshooting RF designs using spectrum analyzers, power meters, network analyzers, etc.

    Desired qualifications include…
    • Experience using DOORS
    • Experience designing test sets with National Instruments equipment
    • Experience designing or using NI Labview software
    • Experience developing or testing VHDL
     
    Job Number: APRF8753
    Job Location: Mason, OH
    Rate: $40.00 to $60.00
    Per Diem: No
    Overtime: Yes
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 06/19/2017
    Firm Name: YOH SERVICES
    Attention: Jessalyn McKeown
    Address: STE 100
    11960 WESTLINE INDUSTRIAL DR

    City, State: ST LOUIS, MO 63146-3212
    Phone: 314/275-1218
    800 Phone: 800/298-0666
    Website: jobs.yoh.com

    RS Avionics/Elec Tech II

    Description:
    PDS is seeking a Avionics/Electrical Technician II for an open position in Brunswick, GA.

    1. Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
    2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
    3. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
    4. Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
    5. Performs and complies with engineering changes and modifications as required.
    6. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
    7. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
    8. Tests and maintains test equipment, electronic systems, and components.
    9. support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
    10. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
    11. Adapt to sudden schedule changes.

    Unique Skills:



    Experience with Software loading and systems test.



    For Additional Information on this Opening Please Contact
    Kellye Roberts: 
    Direct Number: 912-257-4867
    Email Your Updated Resume to
    kroberts@pdstech.com

     

    Connecting the Right People to the Right Jobs. TM

     


    Education and Experience Requirements:
    High School graduate/GED. A & P license, FCC license or NCATT certification preferred.Four (4) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.

     



    1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 2. Performs other duties as assigned.

    Requirements:
    1. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
    2. Ability to read and interpret basic blueprints and schematic diagrams.
    3. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
    4. Must be able to climb stairs and ladders, work in confined areas and lift up to 80 pounds.

     



    For Additional Information on this Opening Please Contact
    Kellye Roberts: 
    Direct Number: 912-257-4867
    Email Your Updated Resume to
    kroberts@pdstech.com

     

    Connecting the Right People to the Right Jobs. TM

    PDS Tech, Inc. is an Equal Opportunity Employer and will Not discriminate against applicants on the basis of race, color, religion, Sexual orientation, gender identity, national origin, veteran status, or Disability


     
    Job Number: 1710066570
    Job Location: Brunswick, GA
    Duration: 6 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Kellye Roberts
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021je2AAA&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Reliability engineer

    Description:
    MUST HAVE ACTIVE SECRET CLEARANCE TO START.
    Duration: 1 Year
    Rate: $85.00/hr.
    Work week: 9/80
    ACTIVE SECRET clearance required to start.
    Candidate will be responsible for providing technical leadership in the areas of Reliability, Modeling, and Availability analysis efforts for developmental satellite programs. Applicant must have extensive background in probability and statistics used in performing Reliability analysis; extensive hands-on experience in conducting and managing Reliability.
    Candidate will be able to guide / mentor employees performing the following tasks: failure rate/MTBF predictions, Reliability Allocations, modeling and simulations, Probability of Success, and Availability analysis. Candidate will have strong analytical skills, knowledge of wide array of industry tools used to conduct Reliability analysis, ability to prepare and present briefings to senior leadership and external customers, excellent interpersonal and communication skills, excellent skills with Microsoft tools and experience with multiple software analysis tools used in Reliability analysis.
    Qualifications
    Basic Qualifications:
    Bachelor’s degree in a technical field and a minimum of 14 Years with Bachelors in Science; 12 Years with Masters; 9 Years with PhD, in core Probability and Statistics as used in Reliability analysis and activities; capable of obtaining a SCI/SSBI clearance.
    Preferred Qualifications:
    Bachelor’s degree in technical field (Electrical, Aerospace, Mathematical, or Computer Science disciplines) and a minimum of 16 years of Reliability experience 16 years with a Master’s degree; 9 years with PhD, combining hands-on Reliability analysis and modeling skills for satellite hardware and systems. Currently holds an active SCI/SSBI clearance.
     
    Job Number: KMMCDONO
    Job Location: Redondo Beach, CA
    Rate: 80-100p/h
    Per Diem: possible
    Overtime: TBD
    Duration: 1 year
    Start Date: 7/10
    Input Date: 06/13/2017
    Firm Name: TASC TECHNICAL SERVICES
    Attention: Stephen
    Address: 73 NEWTON RD
    P O BOX 1315

    City, State: PLAISTOW, NH 03865
    Phone: 603/382-1114
    Fax Phone: 603/382-2377
    Website: www.tasctech.com

    SECRET -Software Engineer 3, Oklahoma City OK. 73135

    Description:
    PDS Tech is seeking a Software Engineer for an open position in Oklahoma City, OK 73135.  Contact Elisabeth Laspe for details. 314-669-8020 elaspe@pdstech.com

     7 month contract  with possible extensions. Must be a US Citizen and have an Active Secret Clearance.
    • Work will be on the AWACS ground and training systems.
    • The successful candidate develops, documents and maintains architectures, requirements, algorithms, interfaces and designs for software systems. Develops and maintains code and integrates software components into a fully functional software system.
    • Develops software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met.
    • Performs software project management and software supplier management functions.
    • Develops, selects, tailors and deploys software processes, tools and metrics.
    • Executes and documents software research and development projects.
    • Serves as a subject matter expert for software domains, system-specific issues, processes and regulations.
    • Tracks and evaluates software team and supplier performance to ensure product and process conformance to project plans and industry standards.
    • Knowledge of Red Hat Linux, Windows Server and operating system hardening, desired.
    • Develops and maintains code and integrates software components into a fully functional software system.
    • Assists with test procedures and documenting test results to ensure software system requirements are met.
    • Gathers information to support software project management.
    • Documents deployed processes and tools and collect metrics.
    • Supports software research and development projects. Troubleshoots basic software issues. 


     

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

     


     
    Job Number: 1710067269
    Job Location: OK City, OK
    Duration: 7 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Elisabeth Laspe
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021nmBAAQ&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Aerospace Software Engineer - California

    Description:
    Leading aircraft company are seeking an experienced Aerospace Software Engineer to work on the early stage development of an ejectable flight data recorder (EFDR) project, which has been officially established with FAA and EASA. Responsibilities include:

    * Define, analyze and review software requirements to meet defined and anticipated customer needs and system quality and performance standards.
    * Design software architecture and interfaces and implement functionality, typically using a model-based approach.
    * Write test plans and test cases, conduct unit, integration, and system level testing.

    You will be an experienced Software Engineer with considerable knowledge of airborne software development within the aerospace industry. This will include:

    * Model based design and development using Simulink/Stateflow tool chain etc.
    * Software development experience with flight control or avionics systems.
    * Recent experience (within past year) of personally developing production software
    * Familiar with ARP4754/ARP4761 process and DO-178, DO-254 standards.
    * Familiar with DOORS Requirements Management software.

    This is an initial 12 month contract, working on a long-term project, so work is likely to extend for at least 2 years, with the possibility of the position becoming a staff role.
     
    Job Number: JO0000000010
    Job Location: Newport Beach, CA
    Rate: to $85/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: 12 months
    Start Date: ASAP
    Input Date: 11/06/2017
    Firm Name: STRONGFIELD TECHNOLOGIES USA INC
    Attention: Adrian Medhurst
    Address: 5000 BIRCH ST STE 3000
    City, State: NEWPORT BEACH, CA 92660
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Buyer/Planner - Aerospace and Defense

    Description:
    Ingenium Technologies - Los Angeles, CA 91355





    Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/



    A large military aerospace contractor is currently seeking several Senior Buyer/Planners. These individuals would create, review and maintain valid plans of material and manage the supply base in order to meet customer demand.



    Responsibilities will include but not be limited to:

    Plans, schedules, releases and manages purchase, interplant orders and work orders as required.

    Ensures Government Compliance through out the procurement process

    Executes and Manages Non Disclosure Agreements (NDA's)

    Formulates Requests for Quotes based on COE Requirements - ensuring flowdown of contractual requirements

    Source selection and award of direct or indirect material purchase orders for assigned products

    Performs Price analysis for competitive and non-competitive procurements.

    Develops and execute strategies for negotiation of purchase order terms: price, delivery, expedites, etc .

    Conduct post award supplier management with a strong focus on internal customer support (Message Mgt)

    Works with internal and external suppliers to resolve material issues (shortages, emergency customer demands, etc.).

    Quotes deliveries for sales requests.

    Develops and maintains communication channels between various departments and the

    Supply Chain to maintain the flow of materials to support the customer. Reviews, communicates and acts upon anticipated delays.

    Reviews anticipated shortage reports for future demands

    Reviews, analyzes, and makes changes to supply based on the outcome of monthly S&OP meeting

    Maintains and analyzes planning parameters (i.e. Lead times, lot sizes order quantities, safety stock).

    Participates in capacity review meetings with internal and external suppliers.

    Monitor and maintain inventory levels in alignment with business unit goals.

    Participating in CI-/ Lean-projects.



    Required Software: WISE/Cincom/SAP, MS Office applications



    Required Experience:

    5-10 years experience in procurement and planning preferably in the aerospace and defense industry.
    Clear understanding of Nondisclosure Agreement Requirements and Proprietary Data

    Knowledge of ITAR and EAR requirements

    Cost/Price analysis skills required for competitive and non-competitive procurement

    Understanding of Government Contracting; including FAR, DFARS and other government regulations

    Knowledge of sizing, material planning and production scheduling.

    Solid knowledge of WISE/Cincom/SAP, particularly MRP related screens.

    Solid knowledge of Manufacturing Resource Planning (MRPII).

    Solid knowledge of planning functions/roles.


    Required Education:

    Bachelor's degree in a related field preferred or equivalent experience.
    APICS or CPSM/CPM certification preferred.
    Position: Direct Hire, also open to contract/temp



    Travel: 20% domestic and international required



    Compensation: Exempt, Highly Competitive with Benefits



    Location: Los Angeles, CA 91355



    Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee in compliance with International Traffic in Arms Regulations.



    Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.



    Due to the requirements of the Customer, No Visa sponsorship is available.
     
    Job Number: 92088
    Job Location: San Diego, CA
    Rate: 30-45/hr
    Per Diem: no
    Overtime: yes
    Duration: 6 mos to Hire
    Start Date: ASAP
    Input Date: 06/13/2017
    Firm Name: INGENIUM TECHNOLOGIES
    Attention: Alvin Adeva
    Address: 4216 MARAY DR UNIT A1
    City, State: ROCKFORD, IL 61107
    Phone: 815/399-8803 X255
    Fax Phone: 815/399-8804
    Website: www.ingeniumtech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Buyers - Dallas, TX

    Description:
    STS AeroStaff Services is currently hiring Senior Buyers for open positions in Dallas, Texas.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Duties:

    • Demonstrates the highest level of ethics and integrity in all supplier transactions
    • Effectively manages supplier and category performance, including development of policies and procedures for each commodity
    • Leads negotiations with suppliers, utilizing a strong background in fundamental sourcing skills
    • Leads cross-functional Teams for category specific projects delivering significant budgetable savings and efficiencies
    • Participates in development and management of policies and procedures around complex commodities
    • Negotiates and drafts complex contracts
    • Skilled in performing difficult analysis, interpreting results, and providing effective recommendations
    • Determines and implements appropriate levers to achieve best price, balancing cost with operational considerations
    • Creates and implements project or work plans for assigned categories and holds others accountable to plan
    • Researches assigned categories and commodities for new developments
    • Leads improvement initiatives
    • Seeks out challenges and additional responsibilities

    Qualifications:

    • Bachelor's degree in business or equivalent experience required
    • Enterprise level software procurement experience required
    • Strong technology negotiation & contract drafting skills
    • Strong organizational and project management skills (identifies activities, sets deadlines, measures progress)
    • Customer Service driven / strong relationship building skills
    • Displays self-confidence
    • Skilled in the use of MS Office Suite
    • Strong written and verbal communication skills
    • Ability to lead, drive, and adapt to change
    • Strong analytical skills and ability to interpret results / ability to identify process improvement opportunities
    • Demonstrates sound decision making abilities / focuses on the big picture / thinks strategically
    • Takes ownership and accountability
    • Ability to resolve conflicts
    • Strong project, meeting facilitation, and change management skills
    • Positively influences the behavior of others / coaches and mentors others
    • Must be able to manage multiple project opportunities simultaneously
    • Must be able to deliver effective and convincing presentations
    • Develops and manages supplier relationships
    • Works with limited supervision
    • Interfaces with Legal, Tax, Risk Management, Finance, and others as necessary

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 38696
    Job Location: Dallas, TX
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 06/06/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    Simulation & Software Engineer

    Description:
    Simulation & Software Engineer
    Savannah, GA
    Long Term Contract
    $58.00-63.00/Hr

    Unique Skills:
    1. Matlab/Simulink experience modeling real time aircraft systems
    2. Aerospace background with avionics lab testing experience
    3. Ability to understand aircraft electrical wiring diagrams as it relates to HIL simulation
    4. Experience with high level programming or scripting language such as C/C++, Python
    5. Knowledge of data protocols used in aerospace
    6. Experience modeling aircraft systems in real time on industry standard simulation platforms (eg NI, Speedgoat, Dspace,ADI)
    7. Flight and/or aircraft system lab HIL simulation experience
    8. Ability to work independently and self-govern priorities in accordance with lab customer needs

    Job Description
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 7079
    Job Location: Savannah, GA
    Rate: 58.00-63.00/Hr
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/17/2018
    Firm Name: INCONEN CORPORATION
    Attention: Brad
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: brad@inconen.com
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Simulation & Software Engineering Contractor

    Description:
    UNIQUE SKILLS
    1. Matlab/Simulink experience modeling real time aircraft systems
    2. Aerospace background with avionics lab testing experience
    3. Ability to understand aircraft electrical wiring diagrams as it relates to HIL simulation
    4. Experience with high level programming or scripting language such as C/C++, Python
    5. Knowledge of data protocols used in aerospace
    6. Experience modeling aircraft systems in real time on industry standard simulation platforms (eg NI, Speedgoat, Dspace, ADI)
    7. Flight and/or aircraft system lab HIL simulation experience
    8. Ability to work independently and self-govern priorities in accordance with lab customer needs

    JOB DESCRIPTION
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    ADDITIONAL FUNCTIONS
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 17-740-92762
    Job Location: Southeast
    Rate: $58.00 to $63.00/per hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 06/28/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    Simulation and Software Engineer

    Description:
    PDS Tech is seeking an Simulation and Software Engineer for an open position in Savannah, GA.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services.

    Essential Functions:
    • 1. Contributes to planning, developing and coordinating of important engineering projects
    • 2. Provides specialized technical assistance to team members
    • 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • 4. Determines and develops own approach to solutions within schedule and cost objectives
    • 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    • 6. Acts as liaison with representatives outside of the assigned group/area
    •  

    Additional Functions:

    • Actively works to improve daily processes and ensures all work meets customer requirements
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    • Performs other duties as assigned


    For Additional Information on this Opening Please Contact Kellye Roberts: 
    Direct Number: 214-296-2450 
    Email Your Updated Resume to
    kroberts@pdstech.com

     

    Connecting the Right People to the Right Jobs. TM

    PDS Tech, Inc. is an Equal Opportunity Employer and will Not discriminate against applicants on the basis of race, color, religion, Sexual orientation, gender identity, national origin, veteran status, or Disability



    Education/Experience:
    • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Other Requirements

    • Advanced degree in engineering related field preferred
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline

    Unique Skills:

    • 1. Matlab/Simulink experience modeling real time aircraft systems
    • 2. Aerospace background with avionics lab testing experience
    • 3. Ability to understand aircraft electrical wiring diagrams as it relates to HIL simulation
    • 4. Experience with high level programming or scripting language such as C/C++, Python
    • 5. Knowledge of data protocols used in aerospace
    • 6. Experience modeling aircraft systems in real time on industry standard simulation platforms (eg NI, Speedgoat, Dspace,ADI)
    • 7. Flight and/or aircraft system lab HIL simulation experience
    • 8. Ability to work independently and self-govern priorities in accordance with lab customer needs  


     For Additional Information on this Opening Please Contact Kellye Roberts: 
    Direct Number: 214-296-2450 
    Em