Job Search Results

791 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/01/23 Wednesday 12:11AM Pacific Time by ContractJobHunter. )

Listings 1 - 791

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2321 - PROPULSION SYSTEMS ENGINEER - cv. word doc only

Description:
Design and integration of the system;

Review of the design and documentation of all the aspects related to your system;

Checking for quality of the Supplier's analyses;

Validation and verification of system requirements;

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing;

Definition, preparation and execution of qualification and certification tests;

Working with supplier in the investigation and resolution of test findings;

Preparation or review of qualification or certification reports;

Working with suppliers to establish complete system requirements and system interfaces;

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments;

Provide support to business units in Propulsion Control requirement definition, verification and validation, following ARP4754

Identify issues and obstacles, follow-up and communicate progress;

Prepare reports or presentations.

Bachelor degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of eight (8) years.

Possess very good knowledge in Propulsion Control Systems and their integration on the aircraft.

Background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Familiarity with Part 25 Regulations and certification requirements.

Flight testing/testing experience is an asset.

Have good oral and technical writing skills in English and French knowledge is an asset.

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers.

Dynamic person with initiative, a strong sense of responsibility and good judgment

Have knowledge of MS Office software (essential).

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc).

Must be able to travel to USA (Wichita) to support Flight testing and supplier reviews (if required).
 
Job Number: 2321
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/11/2018
Last Updated: 05/18/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2377 - MECHANICAL DESIGNER - CABINETS - cv, word doc only

Description:
Act as a specialist in aircraft interior cabinets.

Search for information related to project assignment to the interior and exterior of the aircraft.

Manage customer requests related to customizations of interior options.

Establish technical requirements, mechanical and electrical interfaces and design, integrate, certify, test and troubleshoot the systems described above.

Assume responsibility for Definition engineering deliverables and milestones that the department must meet.

Act as the technical focal point for the engineering external suppliers.

Manage and conduct quality, productivity and cost governance with the engineering external suppliers.

You must be challenge-driven, results-oriented and problem-solving oriented.

Excellent knowledge in design and development of concepts using graphic design software.

Bachelor's Degree in Mechanical or Equivalent Engineering or college.

Familiar with the CATIA V5 3D design tool.

Are well organized and focused on projects.

Good oral and written communication skills in English and French.

Collaborate in a multidisciplinary team, you adapt easily to changes, and customer satisfaction is your number one priority.

Are customer focused, problem-solving and innovative focus as well.

Are autonomous, flexible and results-oriented through project management skills.

Have experience in the design or installation of cabinets to be assembled.
 
Job Number: 2377
Job Location: Montreal, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/03/2018
Last Updated: 06/04/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2378 - 3D WIRING DESIGNER - cv, word doc only

Description:
Develop the routing new Aircraft Interiors Harnesses using CATIA V5.

Follow established guidelines for design such as BM, BAPS and RAE documents.

Optimize design through analysis of weight, cost and productivity.

Conduct and/or participate in trade-studies to enhance the product definition throughout its lifecycle.

Incorporate change management authorities (RFC, PCR) into 3D models.

Contribute to the team effort by meeting the team%u2019s objectives for productivity and quality KPI%u2019s.

Contribute to other relevant tasks based on program needs and demonstrate flexibility to adapt.

University degree in mechanical Engineering of equivalent work experience in harness routing.

Have over 10 years of CATIA V5 Experience in harness routing.

Have experience with harness manufacturing or methods (formboards).

Have minimum of 5 years of relevant working experience in Aerospace or Transportation.

Have harness installation experience and you are familiar with ECAD tools & processes, BM%u2019s and BAPS.

Have experience reading wiring diagrams & ESSD (an asset).

Have a strong sense of responsibility and have good organizational skills and initiative.

Are innovative and open to new ideas.

Have the ability to resolve problems and conflicts.

Are comfortable working with the MS Office suite.

Basic knowledge required :

3D and MBD creation in CATIA V5
GD&T and technical drawings
Certification rules
Manufacturing requirements
 
Job Number: 2378
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/06/2018
Last Updated: 05/18/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2379 - HYDRO-MECH. SYS. INTEGRATOR - cv, word doc only

Description:
Support the Client Mod-line in Montreal by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Hydro-Mechanical systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests

Track and ensure successful implementation of systems installations and modifications

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes

Develop good working relationships with various departments within BA and with all suppliers

Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset.

Experience in providing engineering support to a Final Line/ Production.

Have 10-15 years' experience in aircraft Hydro-Mechanical systems (Fly-By-Wire & Control Surfaces, Wing High Lift, Hydraulics, Landing Gear, Brakes, etc).

Conversant with design, qualification and certification test requirements of Hydro-Mechanical systems.

Have flexibility to travel.

Are Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Are familiar with Microsoft Office software tools.

Have Strong communication skills, ability to work well in a multi-disciplinary team environment.
 
Job Number: 2379
Job Location: Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/06/2018
Last Updated: 06/04/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2384 - CABINET DESIGNER - cv, word doc only

Description:
Produce interior cabinet datasets (detail, assembly and installation), 3D models and 2D drawings.

Communicate closely with supporting functions such as Methods, Operations, Customer Support, Interior Design, Stress, Materials and Processes, and Weight and Balance.

Support requests for modifications during cabinets manufacturing.

Support integrators during conceptual phase.

Bachelor's Degree or college degree in Mechanical/Aeronautical.

Solid experience working with Enovia/VPM Nav and Catia V5 (more than five (5) years).

Are well organized and focused on projects.

Bilingual - have good oral and written communication skills in French and English.

Like to collaborate in a multidisciplinary team, you adapt easily to changes.

Have the ability to understand complex engineering issues and are innovative in problem solving.

Must be a team worker, able to work under pressure and under a minimum of supervision.

Have relevant technical experience in interior completion.

Must have design experience in cabinet assembly design and/or cabinet installation.
 
Job Number: 2384
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/06/2018
Last Updated: 05/29/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2386 - MECHANICAL STRESS ENGINEER - cv, word doc only

Description:
Checking technical drawings.

Stress Analyzing and write stress rapport for mechanical tools and equipment.

Sign and seal design drawings for mechanical tools and equipment (lifting devices, staging, etc.).

Communicate with other departments: methods, planning, production, etc.

Mechanical Engineering degree.

Experience between 5-10 years.

Member of OIQ.

Must have knowledge and experience of mechanical systems.
Experience in welding and CWB group.

Knowledge of design STD (CSA, ANSI, ISO, ASME, etc)

Experience in at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Knowledge of aircraft structure and system installation technical requirements ( TCCA, FAA & EASA ) is an asset.

Must have Experience of working with new design and must be able to demonstrate understanding of aircraft component load path and functions.

Must have experience using Patran and Nastran.

Must have working knowledge of Catia V5, finite element modeling and analysis.

Must have excellent communication skills.

Bilingual - French and English, spoken and written.

Must be computer literate and familiar with commonly used software ( MS Office ).
 
Job Number: 2386
Job Location: Mirabel, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/11/2018
Last Updated: 06/04/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2388 - ENGINEERING TECHNOLOGIST - STRUCTURES - cv, word doc

Description:
Provide technical support related to Client aircraft to external and internal customers for issues related to structures and surface finish (paint, primer, varnish on completion parts, etc).

Issuing and supporting engineering change requests for in-service issues and supporting Engineering through the change request process.

Monitoring the fleet for reliability, technical issues and identifying root cause and corrective actions.

College degree in Aircraft maintenance or a University degree in Mechanical Engineering.

Have five (5) years%u2019 experience in aviation.

Have good knowledge of aircraft systems and structure. Challenger experience is an asset.

Are computer literate, familiar with Lotus Notes & MS Office.

Are a team player, capable of working well with colleagues and customers, have a winning, can-do attitude, and results oriented.

Bilingual - have very good communication skills, both written and spoken, in French and English.

Knowledge of ground support equipment is an asset.

Knowledge of aircraft operation, engineering and maintenance is an asset.
 
Job Number: 2388
Job Location: Montreal, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 05/03/2018
Last Updated: 07/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2402 - CABINET INTEGRATOR - cv, word doc only

Description:
Act as a specialist in aircraft interior cabinets;

Search for information related to project assignment to the interior and exterior of the aircraft;

Manage customer requests related to customizations of interior options;

Establish technical requirements, mechanical and electrical interfaces and design, integrate, certify, test and troubleshoot the systems described above;

Assume responsibility for Definition engineering deliverables and milestones that the department must meet;

Must be challenge-driven, results-oriented and problem-solving oriented;

Excellent knowledge in design and development of concepts using graphic design software.

Bachelor's Degree in Mechanical or Equivalent Engineering or college

Familiar with the CATIA V5 3D design tool;

Good oral and written communication skills in English and French;

Collaborate in a multidisciplinary team, you adapt easily to changes, and customer satisfaction is your number one priority;

You are customer focused, problem-solving and innovative focus as well;

You are autonomous, flexible and results-oriented through project management skills;

Experience in the design or installation of cabinets to be assembled.
 
Job Number: 2402
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 05/17/2018
Last Updated: 07/06/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2403 - MECHANICAL DESIGNER - SURFACES - cv, word doc only

Description:
Integrate all foam and upholstery build-up and installation on the seat and divan frame

Produce datasets (detail, assembly and Installation), 3D and 2D

Produce and maintain engineering drawings that define the interfaces, details and installations

Supports the W/P integrators in the design.

Produce deliverables such as PCD (procurement control drawing), AMOs (advanced material order) etc

Develop/Design with the Program's design intent and vision.

Closely communicate with supporting functions, Methods, operations, Customer support, design lead, Industrial Design, Weight and M&P.

Design for manufacturing and assembly.

Provide engineering support to Manufacturing for the installation.

Integrate all foam and upholstery build-up and installation on the seat and divan frame.

Highlight and mitigate risks to be able to meet commitments

Respect and follow guidelines BES / BAPS / BM / PDJ / standards/practices, processes and lessons learned.

Ensure design rules are respected and participate to populate the design guide lines.

Ensure the work (dataset & deliverables) are met on time with quality

Ensure customer and production standards are met.

Lead design activities with methods, production, logistics before entry in production.

Maintain an updated detailed product structure of their product, ( IDL, 3D product structure, Options matrix, etc)

Manage priorities to meet assigned deadlines.

Have a college or University mechanical or aerospace engineering degree or equivalent with a minimum of five (5) to eight (8) years of relevant experience and technical advisor experience would be an asset.

Have relevant technical experience in interior completion.
Experience on Client Platform, Seating Design or Integration is an asset, as well as, configuration and spec%u2019ing experience.

Have solid experience working with Enovia/VPM Nav and Catia V5 (two (2) to five (5) years).

Have the understanding of product structure and relational modeling.

Have the ability to understand complex engineering issues and are innovative in problem solving.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Have strong verbal and written English communication skills including verbal French.

Also demonstrate an excellent track record of meeting your commitments with success.

Bilingualism (French and English) is an asset.
 
Job Number: 2403
Job Location: Montreal, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/18/2018
Last Updated: 07/06/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2405 - DESIGN STRUCTURE ENGINEER - cv, word doc only

Description:
Produce layout.

Make the concept of installation and details of cell structures and systems installations.

Provide estimates and statements of work for design related activities.

Participate in design review presentations and technical investigations.

Must have a Bachelor Degree degree in aeronautical or mechanical engineering with 5 years of related experience.

Knowledge of CATIA V5, 2D and 3D modeling.

Bilingual - have a good level of written and speaking French and English.

Have a good integration skills when dealing with multidiscipline groups and partners.

Experience in Aircraft Structures is required.

Experience in System Installation is required.

Knowledge of Client terminology is required.

Ability to create kit drawings and option drawings.

Ability to understand and resolve complexes technical issues.

Knowledge of design standards, configuration management and change management is an asset.

Must have the ability to understand complex engineering issues.

Basic knowledge required :
- 3D and MBD creation in CATIA V5 and 2D drawing.
-Knowledge of Enovia is required.
-GD&T and technical drawings
-Manufacturing requirements
 
Job Number: 2405
Job Location: Montreal/Mirabel, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/17/2018
Last Updated: 07/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
AVIONICS SYSTEMS ENGINEER

Description:
ENEA Software & Services, in partner with an Aerospace client, are looking to fill an immediate opening:

AVIONICS SYSTEMS ENGINEER
To work on a 6-9 month contract in Gig Harbor, WA
Responsibilities:
• Write requirements for the Systems Requirement Document (SYRD) and Mechanical Engineering Requirements Document (MERD).
• Write and execute tests (SBC based) for performing operational and functional tests and outputting pass/fail/data.
• Use of DOORS for requirements tracking and tracing.
• Produce FAA certification reports
• Participate in FAA Systems and Software (SR and SOI) reviews

Experience Requirements:
• Superior technical communication and writing skills with experience using requirement management tools, such as DOORS, Reqtify or equivalent.
• Bachelor’s degree in Engineering
• 7+ years of experience in requirements and/or testing.
• Embedded C/C++ Proficiency
• Individual must have a passion for aviation hardware and thrive in a fast paced environment
• Pilot background familiar with autopilots and other avionics for rotorcraft and fixed wing desired.
• FAA flight test engineering and data processing/analysis experience desired
• Hardware, Altium, DO-178B/C, ARP4754A, ARM Processor, I2C, RS-232/485, ARINC 429 familiarity desired.
 
Job Number: WW040718SYSHEL
Job Location: Gig Harbor, WA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 9 MONTHS
Start Date: April 23, 2018
Input Date: 05/02/2018
Last Updated: 05/18/2018
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Level 3

Description:
Location: Lexington, KY
Rate: $38.00 - $65.00/HR
Duration: 6 month contract
Shift: 1st Shift
Per Diem Split: Possible
Overtime: Possible

****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or have had one within the last 2 years****

Job Description:
Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests. The team is focused mainly on modifying existing aircraft and integrating modified components into various platforms based on customer specifications.

Responsibilities include:
- Your job, as a lead analyst, will be to analyze and write substantiation documentation based on customer requirements using applicable military specifications, internal structural manuals and texts similar to “Analysis and Design of Flight Vehicle Structures” by E. F. Bruhn
- The primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM). MATHCAD and MATLAB are also used for 'hand' calculations
- You will work with mechanical design teams to develop working models for integration of these components.
- Upon design completion, you will be expected to support the installation / integration of your analysis by providing support to the mechanic workforce as required

Skill/Experience/Education
Mandatory:
- 5+ years of stress analysis experience with a Finite Elementary Modeling (FEM) creation using ANSYS, NASTRAN or similar programs
- Bachelor of Science degree in Mechanical Engineering, Aerospace Engineering or Engineering Mechanics from an accredited University with five years of professional experience with a related Bachelor’s degree; or three years of professional experience with a related Master's degree.
- Considered career, or journey, level position

Desired:
- Experience with Microsoft Office Suite (Word, Excel, PowerPoint)
- Demonstrated previous success working in a team based environment to meet objectives
- Government report or thesis writing experience
 
Job Number: 8859
Job Location: Lexington, KY
Rate: $38.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 04/16/2018
Last Updated: 07/10/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Assembler

Description:
PDS Tech, Inc. is seeking Assemblers in Lincolnshire, IL.  
Please reach out to Tiffany Armour tarmour@pdstech.com or call her at 480-351-2945

In this role, you will make utility safety equipment used in commercial, industrial, and residential settings.

What you will do:
  • Assemble fabricated parts at floor stations.
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications.
  • Use hand tools and power tool to assemble units according to product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.

What you will get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training in the area of specialty
  • Opportunity to work with a team making products used in facilities worldwide
  • A fair and consistent pay check

Education Required:
  • High school diploma or GED

Qualifications:

  • Ability to read blueprints
  • mechanical assembly experience


Must provide own safety shoes.

Schedules/Shifts Available:


  • 6:30 am - 3:00 pm

 
Job Number: 1810081754
Job Location: Lincolnshire, IL
Duration: 4 months
Input Date: 05/08/2018
Last Updated: 01/22/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Tiffany Armour
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dxB4AAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembly & Warehouse Associate

Description:
From the Hiring Manager:

~ Looking for someone with a mechanical aptitude who’s interested in gaining experience within the Manufacturing / Production Industry.
~ Looking for a highly motivated individual who’s able to get a task and drive it to completion.
~ Someone with either aviation or automotive parts painting experience would be ideal but not necessary

Summary

The Assembly and Warehouse Associate person will split their time between Mechanical Assembly and Inventory Control (Warehouse Clerk). This position will require a person with a diversified skill set who is flexible and able to prioritize workloads in a rapidly changing manufacturing environment. A typical day can vary greatly and the person can be asked to do assembly work in the production area or inventory control duties in the warehouse / inventory cage.

Duties / Responsibilities:

> The assembly work would entail entry level skills with an aptitude for mechanical assembly.
> Connect / complete small wiring terminations as needed during mechanical assembly
> The warehouse duties would involve inventory control by part allocation to work orders and the stocking of newly received inventory.
> Perform cycle counts and assist with shipping & receiving duties
> Complete production and/or quality related documentation
> The split of these duties will depend on the day-to-day needs in each area but will typically be 50% Mechanical Assembly and 50% Inventory Control.
> Keep work area clean and organized as to present a professional work environment

Job Requirements / Experience:

> 3+ years of production / manufacturing experience or Inventory Control experience
> High School Diploma and U.S. Citizenship is a MUST
> Experience with hand tools (Wrenches, Screwdrivers, Torque tools, Small power tools)
> Forklift experience
> Working knowledge of SAP preferred
> Able to read and interpret instructions, directions, engineering drawings and schematics
> Must be able to lift up to 50 lbs repeatedly
> Able / willing to work with large vehicle & equipment that will require climbing / crawling around, on and under.
 
Job Number: 021_2018
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: Long-Term
Start Date: ASAP
Input Date: 04/11/2018
Last Updated: 06/11/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Electrical Engineers - Wichita, KS

Description:
STS AeroStaff Services is hiring Aviation Electrical Engineers in Wichita, Kansas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Responsible for providing engineering design support to Cessna Citation Service Centers in support of complex aircraft alterations. Manage small to large scale certification projects with responsibilities to include establishing systems design requirements, developing and presenting systems architecture concepts, completing systems design, and obtaining certification for the project.

Job Duties:

• Responsible for developing and completing complex engineering designs
• Ensures designs meet or exceed customers’ expectations and Cessna Quality and Safety standards
• Position requires a strong avionics/electrical systems background and the ability to conduct avionics and electrical systems testing both on and off the aircraft
• Works with Service Center personnel in reviewing customer requests for aircraft installations
• Evaluates feasibility of the requested alterations and provides alternate solutions if necessary
• Monitors and researches new technologies and FAA mandates for potential project opportunities to support the aftermarket
• Guides and directs activities to ensure timely and efficient completion of assigned projects
• Development of program schedules outlining key deliverables and establishing time lines for completion of tasks
• Responsible for identifying FAR’s (Federal Aviation Regulations) applicable to any given project and establishing a means of compliance for those regulations

Qualifications:

• Bachelor of Science in Engineering (Electrical/Mechanical) or related field
• An ability to develop wiring diagrams utilizing company electronic drawing tools is preferred

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 42332
Job Location: Wichita, KS
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 05/08/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Buyer/Procurement Analyst

Description:
Description:
At Client Rotary and Mission Systems, we are driven by innovation and integrity. We believe that by applying the highest standards of business ethics and visionary thinking, everything is within our reach – and yours as a client employee. Client values your skills, training and education. Come and experience your future! Candidate will also be responsible for general purchasing of low to medium complexity Mechanical and Electrical commodities and sub-assemblies in support multiple Client’s programs. Candidate will engage with cross-functional teams to ensure supplier deliveries meet program performance, schedule and cost requirements. Adheres to policies, procedures, programs, systems and assure timely and economical procurement of all material, parts, assemblies, equipment and service.

Skill/Experience/Education:
Mandatory:
Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 3 years of professional experience; or 1 year of professional experience with a related Masters degree. Considered experienced, but still a learner.
 
Job Number: 08064
Job Location: Moorestown, NJ
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 08/24/2018
Firm Name: ICONMA LLC
Attention: Pritam Prince
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CATIA V5 - Structures / Mechanical

Description:
Completions Design / Aircraft Structures Cabin Interiors. -Design responsibilities of interior furnishings and amenities as part of outfitting new aircraft. Engineering design work includes the creation of drawings/models using either CATIA V5.
 
Job Number: 18-12793
Job Location: TX
Per Diem: Split
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 07/11/2018
Last Updated: 08/13/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist

Description:
CNC Machinist applies advanced skills in administration and use of procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. 2. Independently perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. 3. Set up and operate necessary test equipment in accordance with required documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. 4. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required maintenance data to ensure conformity requirements are met. 5. Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. 6. Demonstrate expertise and efficiency in repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. 7. Demonstrate expertise in use, maintenance, and calibration requirements of precision measuring and inspection tools such as, but not limited to, micrometers, calipers, bore gauges, multimeters, watt meters, spectrum analyzers, and borescopes. 8. Demonstrate expertise in the flow of materials and work order processes within the repair station. 9. Maintain and utilize all required paperwork in accordance with FAA Repair Station requirements. 10. Maintain a clean and orderly work area. 11. Comply with all company and legislative environmental health and safety regulations. Must be proficient in the setup and operation of 3-5 axis CNC Mills. Must be able to setup and operate conventional mills and lathes and use related precision measuring tools to inspect machined detail components to blueprints / 3D models.


CNC Machinist Lay-out, remove, fabricate and/or install major and minor repairs to flight controls and other secondary structure components using honeycomb core sandwich construction techniques, composite repair techniques, test bench procedures, hydraulic press procedures, and servicing carts. 2. Fabricate and repair sheet metal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. 3. Remove & install APUs and perform all required APU maintenance for all aircraft models 4. Perform repairs to electronic assemblies and subassemblies by removing and replacing circuit components, either through hole or surface mount, using acceptable soldering and circuit repair techniques. 5. Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. 6. Assist with training and instructing of other Acft Compo Repair I and II Techs. 7. Perform other duties as assigned.
HS diploma or GED. A&P license, FCC license, or NCATT cert preferred. Able to read/interpret blueprints, engrg docs and use/read precision measuring tools. Proficient in the operation of all tools & equip in the dept. Basic understanding of shop math. 4 yrs. experience in one of the following or other related expr: Sheetmetal, hydraulic overhaul, avionics/elect compo repair. Accredited schooling in electronics and elect sys may offset some experience reqmts. APU removal, install, service.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/04/2018
Last Updated: 12/28/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer

Description:
We are recruiting for a motivated CNC Programmer for this Aerospace Company to set-up, and operate manual and CNC machines to produce tight tolerance components and tooling while reducing run times.

The ideal candidates must be motivated in the programming and setup of CNC machines in a high-mix, low-volume environment requiring quick turnaround manufacturing runs and on-the-job problem solving to ensure machine spindles are operating most of the shift.

Successful candidates will bring a broad array of skills to help grow the company and the position itself.

RESPONSIBILITIES
Model Parts in Solidworks
Program Parts in Mastercam
Defines Manufacturing Plans
Designs Tooling
Generates Set-Up Sheets
1st Run Set-Up and Part Part Validation
Assistance with First Article Inspections
Reports to the General Manager (Dotted-line to Sr. Programmer or Manufacturing Manager)
Completes Projects Accurately by Deadline
Understands the Material properties of hard and soft alloys

REQUIREMENTS
Min. 3 Years Experience with CAD (Solidworks) and CAM (Mastercam)
High Print to Part Aptitude (in understanding the complete manufacturing process, from Programming to Final Part Inspection)
Min. 3 Years Experience Operating Multi-Axis CNC and Manual Mills (Horizontal Preferred)
Productive, Turns New Programs Quickly
Fast and Efficient in Demanding Customer Environment
Ability to lift over 25 lbs
Excellent mechanical skills and aptitude
Positive, Collaborative, Industrious
Expert in Speed/Feed/Material Properties
 
Job Location: Kent, WA
Input Date: 04/27/2018
Last Updated: 06/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Product Definition & Verification (Checking) Designer III/IV

Description:
Creo Product Definition & Verification Checker III/IV

Location: Canoga Park, CA
Rate: $55-$60/hr DOE
Duration: 6 Month W2 Contract
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**Candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** 10 years as a drawing and model checker for Aerospace mechanical hardware**
** Strong proficiency using GD&T per ASME Y14.5 **
** 5-10 years Creo and Windchill PLM System **

Under limited general direction and following established procedures in accordance with contractual requirements and Company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

30% - Performs design calculations to validate any phase of design requirements.

20% - Estimation of resources and schedule required to complete a design activity and training to staff.

10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
-10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
 
Job Number: 8889
Job Location: Canoga Park, CA
Rate: 55-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 04/09/2018
Last Updated: 05/23/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Stress Engineer

Description:
Plan, organize and prioritize work contents based on project deliverables.

Perform detailed stress analysis of aircraft cabin or cargo components, by classical hand analysis as well as Finite Element methods, to support the structural design efforts of new and modified components from the conceptual phase to development and certification.

Generate stress substantiation reports.

Develop or review structural qualification plans in accordance with company standards and regulatory requirements.

Review and approve vendor drawings, stress reports, and test reports when delegated.

Coordinate with design engineers, team lead, suppliers and technical management personnel to assure that the design meets or exceeds the project deliverables and complies with the regulatory requirements.

Coordinate stress activities with internal clients as well as Suppliers

Participate in regularly scheduled design reviews and is responsible to present stress findings and challenge design solutions.

Develop research plans and participate in industry committees at company's request. Maintains a current knowledge of developments in the field of Structural Mechanics in order to recommend innovations to improve the quality, performance, cost of the company product.

Compile and generate progress reports to convey deliverable objectives.

Provide guidance to junior level stress engineers with regards to analysis methods, process or tools.

Demonstrate a strong work ethic and sense of urgency for completing work assignments.

Experience / Skills / Training:

Position requires in-depth knowledge of Engineering Mechanics and Strength of Materials.

Good leadership and communication skills.

Minimum of 5 years in cabin or cargo compartment stress analysis.

Experience in static (FE and free-body), fatigue and transient analysis, Nastran, Patran, MathCad.

Familiar with FAA/EASA Aircraft regulatory requirements.

Able to utilize Microsoft Excel, Word, PowerPoint and Project PC tools

Education / Special Qualifications: Bachelor's Degree (B.S) in Mechanical, Aerospace, or Civil Engineering
 
Job Number: 792585
Job Location: Mobile, AL
Rate: 60-75 hourly
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 05/08/2018
Last Updated: 05/17/2018
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: 2501 E PIEDMONT RD STE 103
City, State: MARIETTA, GA 30062-7753
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

Cabinet Finisher II

Description:
PDS is seeking a Cabinet Finisher II  for an open position in Savannah, GA.

Under general supervision, prepares and applies finishes to aircraft furniture using aircraft specifications, designs and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship. 

Principal Duties and Responsibilities: 

Essential Functions: 1. Works under general supervision to prepare furniture for finish and disassembly using blueprints, aircraft specifications and design/engineering drawings. 2. Performs high quality repairs to various finished surfaces in the shop and aboard aircraft. Cleans and polishes blemishes as needed to prepare the aircraft for delivery. Applies finish to furniture using spray equipment and other manual/mechanical methods. 3. Uses various types of sandpapers, polishes, adhesives, masking mediums, solvents, finish materials, hand tools and various power tools to disassemble and finish furniture. 4. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior (PTP). 5. Uses the material tracking system to create parts demand, track squawks and to sign-off work. 

Additional Functions: 1. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques. 2. Performs other duties as required. 

Please contact our Altanta or Savannah offices:  Atlanta@pdstech.com Office: 877-272-0088 and SavannahBranch@pdstech.com Office: 912-480-4706
 

Education and Experience Requirements:

High school diploma/GED. Two (2) years experience in wood finishing. Experience in aerospace industry preferred. Basic knowledge of cabinet finishing processes and products.

 



Unique Skills:



Knowledge of Solumina preferred but not required.

Other Requirements: 1. Possess a working knowledge of inspection and process specifications. 2. The ability to read, write, speak, and understand the English language. 3. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 4. Must be computer literate.


 
Job Number: 1810082578
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/25/2018
Last Updated: 01/22/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e0N6AAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chief Design Engineers (Aircraft Engines) - China

Description:
Leading Chinese civil aerospace engine development organization are seeking Chief Design Engineers specializing within the technical areas of Engine Compression Systems OR Low Emission Combustion Systems. Responsibilities include:

* Formulate technology development of civil aircraft engine turbine (for Compression role this includes fan, booster and high pressure compressor)
* Play key role in defining design and systems design processes and defining test & verification platform for engine test/approval
* Provide high-level technical consultancy in field of compression systems OR low emission systems for aircraft engine design
* Mentoring and training of staff and building development teams

For these roles you will have at least 10 years within the field of aircraft turbofan engine development and have an in-depth knowledge of some of the following: turbine aerodynamics, cooling, mechanical and structure theory; compression systems design theory; and aircraft engine test/validation. In addition experience in project and team management would be preferred.

Ideally the client is looking to hire someone on a fixed-term employment basis working directly for the Chinese client in Shanghai, with initial durations of between 2 and 5 years available (renewable). In addition to a generous salary the remuneration package includes accommodation (or allowances), home leave and local travel allowances, healthcare provision and other benefits.


Consideration will also be given to those who are looking to work on an hourly/daily paid consultancy basis and the client can be flexible on the hours of work in China when operating on this basis.
 
Job Number: JO000000008
Job Location: China
Rate: Negotiable
Duration: 2-5 years
Input Date: 10/09/2018
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) - Level 2 / Level 3 FL

Description:
161797/7804089
Job Title: Component Product Engineer (Project Engineer) - Level 2 / Level 3

Number of Positions: 2

Remaining Positions: 2

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



Position is for a staff engineer for the development of rocket engine systems hardware and engine hot-fire test planning. This position requires knowledge and experience with rocket engine combustion devices hardware design and development, manufacturing processes, and vendor integration. Tasks include development of trade studies, design concepts, systems integration and component- and engine-level test plans. Hardware includes injectors, combustion chambers, nozzles, igniters.



Under general direction, the Engineer determines approaches to objectives demonstrating a complete understanding and application of engineering principles, concepts, and practices.



40%: Development and production fabrication support of Combustion Devices rocket engine components (injectors, thrust chambers, nozzles). Translates engineering and scientific concepts from preliminary ideas through entire product life cycle.



10%: Test support for combustion devices components



20%: Supplier integration with external vendors



20%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.



10%: Develops trade studies, design concepts, systems integration and component-level test plans.

Skills:
-Experience with liquid rocket propulsion systems desired.

-Experience working an equivalent engineering design/development environment is desired.





-General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering

-Ability to read and interpret blueprints, technical drawings and specifications

-Ability to communicate clearly and concisely;May require the use of engineering test equipment, CAD, and/or various computer systems.

-Ability to operate effectively in a team environment.



Education:
-BS Degree in Mechanical Engineering, Aerospace Engineering or related field w/10+ years experience required (or equivalent).

Skills:
Required
PROJECT ENGINEERAEROSPACE

State/Province: Florida
City/Town: Jupiter

Start Date: 03/26/2018 Hours Per Week: 40.00
Est. End Date: 09/23/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible.
 
Job Number: MB-7804089
Job Location: Jupiter, FL
Rate: 55/hr max
Duration: 6 months
Input Date: 04/30/2018
Last Updated: 06/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III / local preferred URGENT CA

Description:
160209/7333281

8 open positions

48/hr max

Manager is currently interviewing.

Job Title: Component Product Engineer (Project Engineer) II/III



Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **



* Candidates should have 2 to 8 years of related work experience. No recent college graduates please *



Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.

Skills:
25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.
10%: Supplier integration with external vendors
10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
A Bachelor's degree in Mechanical or Aerospace Engineering.

Skills:
Required

PROJECT ENGINEER COMPONENT ENGINEERING

State/Province: California
City/Town: Canoga Park

Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 03/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7333281
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 04/03/2018
Last Updated: 05/18/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II (Project Engineer) – Electric Thrusters

Description:
Location: Redmond, WA
Rate: $50.00 - $53.00/HR
Duration: 6 month contract
Shift: 9/80 Schedule, OT possible

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
- Seeking a motivated aerospace engineer to support our electric propulsion thrusters.
- The selected candidate will help assure the success of space missions through development, qualification, and production of Hall, Arcjet, Ion, or other EP thrusters.
- The candidate will demonstrate attention to detail and the highest standards of quality assurance for the production of mission critical hardware.
- The candidate will also be a key resource in the design, development and testing of new electric propulsion products.
- Typical duties will include assisting the program manager in manufacturing and delivering flight hardware, guiding integrated product development teams, and leading product proposals.
- Additional duties will include performing technical analyses, conceptualizing new product designs, establishing system requirements and specifications, planning and conducting test and product verification activities, analyzing test data, developing new business relationships, and generating customer presentations.


Skills:
Required:
- 2 years of experience in propulsion, plasma devices, or mission-critical technology is required.
- Must be proficient with Microsoft Office products (Word, Excel, and PowerPoint).

Desired:
- Priority will be given to candidates with experience in electric propulsion including cathodes, plasma thrusters, Hall thrusters, ion thrusters and arcjets.
- Priority will also be given to candidates with experience in a production environment developing and improving products and manufacturing processes.
- Candidates should have strong technical writing and presentation skills, and should have experience working in teams.

Education:
- A Bachelor's degree in Aerospace Engineering, Aeronautical Engineering, Astronautics, Mechanical Engineering or Physics is required.
- A Master's degree or higher in an engineering discipline or physics is preferred.
 
Job Number: 8872
Job Location: Redmond, WA
Rate: $50.00 - $53.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 05/07/2018
Last Updated: 06/26/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II (Project Engineer) – Electric Thrusters ** Candidates must have Electric Propulsion or Plasma Physics education or experience ** WA

Description:
161793/8205016
Job Title: Component Product Engineer II (Project Engineer) – Electric Thrusters

Number of Positions: 1

Remaining Positions: 1

Additional Information: More resumes needed! Candidates must have Electric Propulsion or Plasma Physics education or experience.

** Candidates must have Electric Propulsion or Plasma Physics education or experience **


Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Seeking a motivated aerospace engineer to support our electric propulsion thrusters.
The selected candidate will help assure the success of space missions through development, qualification, and production of Hall, Arcjet, Ion, or other EP thrusters.
The candidate will demonstrate attention to detail and the highest standards of quality assurance for the production of mission critical hardware.
The candidate will also be a key resource in the design, development and testing of new electric propulsion products.

Typical duties will include assisting the program manager in manufacturing and delivering flight hardware, guiding integrated product development teams, and leading product proposals.
Additional duties will include performing technical analyses, conceptualizing new product designs, establishing system requirements and specifications, planning and conducting test and product verification activities, analyzing test data, developing new business relationships, and generating customer presentations.
Skills:
Required:

2 years of experience in propulsion, plasma devices, or mission-critical technology is required.
Must be proficient with Microsoft Office products (Word, Excel, and PowerPoint).
Desired:

Priority will be given to candidates with experience in electric propulsion including cathodes, plasma thrusters, Hall thrusters, ion thrusters and arcjets.
Priority will also be given to candidates with experience in a production environment developing and improving products and manufacturing processes.
Candidates should have strong technical writing and presentation skills, and should have experience working in teams.
Education:
A Bachelor's degree in Aerospace Engineering, Aeronautical Engineering, Astronautics, Mechanical Engineering or Physics is required.
A Master's degree or higher in an engineering discipline or physics is preferred.

Skills:
Required
PROJECT ENGINEERAEROSPACE ELECTRICAL

State/Province: Washington
City/Town: Redmond

Start Date: 04/30/2018 Hours Per Week: 40.00
Est. End Date: 10/28/2018 Hours Per Day: 8.00
Schedule Notes: 9/80 schedule. OT possible. Days Per Week: 5.00
 
Job Number: MB-8205016
Job Location: Redmond, WA
Rate: 53/hr max
Per Diem: no
Duration: 6 months
Input Date: 05/24/2018
Last Updated: 05/31/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II / Valves & Actuators

Description:
Location: Jupiter, FL
Rate: $35.00 - $39.00/HR
Duration: 6 month contract
Shift: 1st Shift – Regular 40 hour week. OT possible

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** Component Product Engineers are also known as Project Engineers **
** Bachelors degree required **

25%: Development and fabrication support of rocket engine valve and actuator components. Translates engineering and scientific concepts from preliminary ideas through product life cycle.
25%: Supplier integration with external suppliers ensuing requirements are achieved on time and within budget
20%: Interfaces with other members of project or program teams, management, and technical staff to provide coordination of technical, schedule and cost solutions to team objectives.
20%: Analyzes and verifies valve & actuator design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
10%: Develops trade studies, design concepts, systems integration and component-level test plans..

Skills:
-Experience with liquid rocket propulsion systems desired.
-Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.
-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.
-Demonstrated leadership skills are highly desirable.

Education:
-BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 3 years experience in related field.
-MSME/AE degree is highly desirable.
 
Job Number: 8664
Job Location: Jupiter, FL
Rate: $35.00 - $39.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 06/18/2018
Last Updated: 07/02/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II / Valves & Actuators FL

Description:
7671367
Job Title: Component Product Engineer II / Valves & Actuators

Number of Positions: 2

Remaining Positions: 1

** Candidates should have 3 to 5 years of experience **

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Component Product Engineers are also know as Project Engineers **



** Bachelors degree required **



25%: Development and fabrication support of rocket engine valve and actuator components. Translates engineering and scientific concepts from preliminary ideas through product life cycle.



25%: Supplier integration with external suppliers ensuing requirements are achieved on time and within budget



20%: Interfaces with other members of project or program teams, management, and technical staff to provide coordination of technical, schedule and cost solutions to team objectives.



20%: Analyzes and verifies valve & actuator design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.



10%: Develops trade studies, design concepts, systems integration and component-level test plans..

Skills:
-Experience with liquid rocket propulsion systems desired.

-Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.

-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.

-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.

-May require the use of engineering test equipment, CAD, and/or various computer systems.

-Ability to operate effectively in a team environment.

-Demonstrated leadership skills are highly desireable.

Education:
-BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 3 years experience in related field.

-MSME/AE degree is highly desireable.



Skills:
Required
PROJECT ENGINEERAEROSPACEAEROSPACE ENGINEERING

State/Province: Florida
City/Town: Jupiter

Start Date: 03/05/2018 Hours Per Week: 40.00
Est. End Date: 09/02/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7671367
Job Location: Jupiter, FL
Per Diem: no
Duration: 6 months
Input Date: 04/25/2018
Last Updated: 05/25/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Design Engineer

Description:
Position Summary:
The Composite Design Engineer will be responsible for much of the structural design and documentation required as part of the development of an entire line of FAA TSO certified composite floats. This position provides a unique opportunity to be an integral member of a team dedicated to the creation of a new manufacturing initiative.
Position Responsibilities:
1. Conceptual design and related design studies of composite structure, including: outer mold line lofting, structural layout, part break definition, bonded joint configuration, assembly methodology, design for manufacturability, and tooling approach
2. Detail structural design using CATIA CPD, including ply layout, splicing, and darting information
3. Creation of design documentation, including drawings and prototype manufacturing planning
4. Creation of technical documentation related to design. This may include reports, presentations, and analyses which document lessons learned, design decisions made, results of tests conducted, etc.
5. Assist the tooling group with design of tooling, fixtures, and jigs for composite structure
6. Work with the manufacturing team to produce prototype and production composite parts and assemblies in accordance with approved specifications
7. Other engineering tasks central to the creation of a composite float such as: loads calculations, ply shape modification and nesting, providing design support to other departments, etc.
Experience and Skills
Qualifications:
· Bachelor of Science Degree in Engineering (Aerospace, Mechanical, etc.) with experience in all stages and facets of composite structural design. New product development experience preferred
· Proficiency with CATIA V5. Autodesk Inventor experience a plus
· Experience with composite part and assembly definition. Experience with CATIA CPD strongly preferred
· Experience with composite drafting and documentation practices, including familiarity with GD&T
· Experience with design data control and product lifecycle management practices. Familiarity with Autodesk Vault a plus
· A strong understanding of the theory and practical application of composite structures in the aerospace industry
· Strong intuitive understanding of practical composite fabrication methods and material behavior
· Understanding of metallic part design and integration into composite structure
· Excellent interpersonal, presentation, and written communication skills
· Hands-on experience with composite part and bonded assembly fabrication

The Structures Company is an AA/EOE.
 
Job Number: 205
Job Location: ST Paul, MN
Duration: Permanent/Contract
Start Date: ASAP
Input Date: 10/02/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Manufacturing Engineer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Support manufacturing of composite aerospace components.


Work closely with operations personnel to develop manufacturing solutions and solve production issues in hand layup, secondary bonding, autoclave cure, machining, NDI, assembly, and final inspection processes.


Learn and understand requirements to determine product impacts and recommend disposition of the parts.


Work in a cross functional team to develop and implement process improvements.


 


Requirements & Qualifications:


Bachelor’s Degree in Aerospace, Mechanical, Manufacturing, Chemical Engineering or related and 10 years of applicable experience


Experience in working with aerospace specifications and drawings


Experience designing / supporting an aerospace manufacturing process with the necessary materials, tooling, and equipment


Knowledge of root cause / corrective action processes and techniques


Functional knowledge of Process Failure Modes and Effects Analysis (PFMEA)


Functional knowledge of production control systems (SAP/Visual Mfg/etc)


Experience authoring, modifying and auditing procedures


Experience estimating, planning, and streamlining manufacturing processes


Experience using SPC to monitor and improve processes


Experience addressing manufacturing discrepancies through a formal MRB process


 


Preferred Skills and Experience:


Composites hand layup, fiber placement, bonding, cure, assembly, and machining experience


Experience in the use of NX 10


 
Job Number: O8092956
Job Location: Clearfield, UT
Rate: 75-85
Per Diem: Yes, Split
Overtime: Yes, 20+ hours/week
Duration: 1 year+
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Project Manager - E E Background (OK)

Description:
Basic Purpose/Accountabilities:
Accountable for project management activities, including front end loading, detailed design, and construction support for electrical projects at the Client Refinery Technical Services.

Accountable for small and mid-sized projects up to $30MM.

Primary Functions/Responsibilities:
Safety
• Manage electrical projects resulting in all work being conducted safely, environmentally friendly, and technically sound. All compliance requirements will be met.
• Complete all required safety training and adhere to applicable safe work practices and procedures.
Integrity
• Accountable and deliver on commitments
Responsibility
• Provide single point of accountability for project management and project expertise.
• Manage project costs, project schedule, personal resources, technical competency, environmental requirements and safety.
• Interact with Process, Instrument/Electrical Engineers, and Mechanical Engineers to coordinate project activities and coordination of assigned resources for completion of projects to meet project timeframes.
• Taking a lead role in electrical capital projects
Innovation
• Participate in and support the use of the Front End Loading and other demonstrated best practices in the execution of projects.
Teamwork
• Partner with customers to develop project charters, secure funding, engineer projects, support construction and provide assistance through the startup of projects.

Critical Skills:
• BS degree in Electrical Engineering
• Able to interact with Contractors

Leadership Criteria:
• Strong leadership skills
• Communicate clear and specific strategies
• Use technical/project expertise to contribute to success
• Establish priorities and develops critical tasks
• Engender trust
• Create free flow of information
• Encourage creativity, innovation and continuous improvement
• Drive company values and values of all people
• Strong business focus to ensure value adding activities are captured and implemented
• Excellent customer focus
• Ability to utilize functional knowledge and expertise to contribute to the success of the business

Experience with:
• Electrical design, technical expertise and engineering support related to refinery electrical equipment and power distribution systems.
• Project management including developing capital estimates, preparing funding, detail design, scheduling, construction and execution plans.

Other:
• Minimum of 5 years refinery project experience

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-50118OKPCR
Job Location: Ponca City, OK
Rate: $ BOE/HR
Per Diem: PD Split Possible
Overtime: Possible
Duration: 11 mos or longer
Start Date: ASAP
Input Date: 06/25/2018
Last Updated: 06/29/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification Checker III/IV URGENT CA

Description:
161675/8206731 (7812987)
Job Title: Creo Product Definition & Verification Checker III/IV

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **





** 10 years as a drawing and model checker for Aerospace mechanical hardware**



** Strong proficiency using GD&T per ASME Y14.5 **



** 5-10 years Creo and Windchill PLM System **





Under limited general direction and following established procedures in accordance with contractual requirements and Aerojet Rocketdyne policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.



40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.



30% - Performs design calculations to validate any phase of design requirements.



20% - Estimation of resources and schedule required to complete a design activity and training to staff.



10% - Provide technical guidance to less senior CAD designers and to design support personnel.



Skills:
-10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).

-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.

-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).

-ASME Certification in GD&T is a plus.

-Ability to read and interpret product definition and related specifications.

-Electronic markup tools and the ability to work paperless is required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.


Skills:
Required
GEOMETRIC DIMENSIONINGCREOGEOMETRIC TOLERANCINGWINDCHILLAEROSPACE
Additional
PACKAGING ENGINEERINGHARNESS CABLING

State/Province: California
City/Town: Canoga Park

Start Date: 04/30/2018 Hours Per Week: 40.00
Est. End Date: 10/28/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-8206731
Job Location: Canoga Park, CA
Rate: 60/hr max
Per Diem: no
Duration: 6 months
Input Date: 04/25/2018
Last Updated: 05/23/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Design/Data Integrity Engineer position in Structural/Mechanical Engineering for Completions Engineering. Responsibilities primarily involve engineering design, modeling, drafting, and checking of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation. At times this position may also be asked to review design work created using either AutoCAD or CATIA V5 and ensure design standards are consistent with company standards and accepted design methods. Engineering design work includes the creation of drawings/models using either AutoCAD or CATIA V5. Design engineer will employ design standards consistent with company standards and accepted design methods. Design assignments are executed under the direction of a Lead engineer or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head. Experience as Design Checker/Data Integrity a plus.
 
Job Number: 18-135545
Job Location: WI
Per Diem: Yes
Overtime: Possible
Start Date: ASAP
Input Date: 05/02/2018
Last Updated: 05/10/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Review Engineering Design Documentation consisting of Drawing, Engineering Order and Parts List for consistency with company standards, drawing quality and drafting requirements. Also review 3D dataset to ensure correct design representation in the Digital Aircraft model.

Duties and Responsibilities:
• Check Drawing, Engineering Order and Parts List for adherence to company standards.
• Check 3D dataset in CATIA V5 and PLM System.
• Participate to design reviews and provide guidance to design team regarding drafting rules and dimension & tolerance requirements.
• Collaborate with Design and Integrated Product Teams to solve issues identified during the reviews; Document and communicate issues found during reviews; Consult with design team and other checkers for interpretation or drafting rules; Act as a Subject Matter Expert regarding interpretation and application of drafting rules; Provide inputs to management on major issues being identified and help develop alternatives for solutions.

Education, Work Experience, Certification and/or Licensure:
• Minimum of 10 years to a maximum of 25 years’ experience designing mechanical and / or structural parts, assemblies or installations for aircraft
• At least 7 years of experience with CATIA and PLM Systems (preferably Teamcenter)
• 5 years of experience working with GD&T
• 5 years of experience checking Aerospace Drawings.
• Detail oriented;
• BS Mechanical or Aerospace Engineering or equivalent;
• Experience with composite materials is a plus.

Knowledge, Skills and Abilities:
• Very familiar with aircraft production and assembly methods.
• Ability to address issues identified in a direct but respectful way.
• Ability to consistently apply defined criteria.
• Able to work with people with diverse corporate / design culture background;
 
Job Number: 28-021
Job Location: Greensboro, NC
Rate: up to $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 04/30/2018
Last Updated: 06/15/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Drafter

Description:
Creo 5 years minimum Mechanical Design 5 years minimum

Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes computer-aided design equipment and/or graphic tools such as, CAD. Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications
 
Job Number: 42204
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 05/17/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4

Description:
Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.

** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **

** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **

Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

- Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
- Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
- Applies theories of heat and energy transfer to create practical solutions to technical problems
- Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
- Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.


Skills:
- Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
- Winchill experience strongly preferred.
- Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
- Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
- Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
- Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- Must be able to prepare and make presentations at both internal and customer design reviews.


Education:
- BS degree in an Engineering field or equivalent field. MS degree is desired.
 
Job Number: 8574
Job Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 03/12/2018
Last Updated: 06/26/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4 / Bachelors degree is REQUIRED / GD&T / 10 years Design Engineer in rocket propulsion hardware and 10 years Designer using ProE / Creo URGENT CA

Description:
161251/7561968
(8122965)

Job Title: Design Engineer - Level 4

Number of Positions: 3

UPDATE 3-5-18: Manager is requesting candidates with really strong GD&T (Geometric Dimensioning and Tolerencing) experience. Please provide summaries of GD&T experience on your resume.


Must have a Bachelors degree. It is a requirement for this group.


Duties:




** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.



** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **





Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
Winchill experience strongly preferred.
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.
Education:
BS degree in an Engineering field or equivalent field. MS degree is desired.

Skills:
Required
AEROSPACE DESIGNCREOGEOMETRIC DIMENSIONINGGEOMETRIC TOLERANCINGWINDCHILL

State/Province: California
City/Town: Canoga Park

Start Date: 02/12/2018 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A7561968
Job Location: Canoga Park, CA
Rate: 60/hr max
Per Diem: no
Duration: 7 month contract
Input Date: 07/24/2018
Last Updated: 08/06/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design/Mechanical Engineer-Cabin Interiors

Description:
Design/Mechanical Engineer-Cabin Interiors
Savannah, GA
Rate: $55.00/HR

Unique Skills:

Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
 
Job Number: 8982
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/24/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer

Description:
* Looking for someone with SolidWorks Composer software exp (it’s a CAD Model animation software package)
* Although the emphasis is Mechanical Design, the ideal candidate should have some exposure to electrical design drawings as well.

Summary

The Designer will prepare rough sketches, with a focus on Mechanical Design and Drafting, by studying customer specifications and creating a picture of the system, components and/or parts to support sales and marketing.

Duties / Responsibilities:
> Applies standard design practices through the use of welding, machining, manufacturing and assembly drawing symbols, descriptions and call outs.
> Prepares final drawings by studying engineering sketches, specifications and supporting documents.
> Develops layouts of the system, sub-systems, and parts; identifying dimensions, angles, curvatures, tolerances and materials
> Maintains engineering data base by entering data and completing backups.
> Mechanical design of enclosures, test fixtures and detailed electronics packages utilizing SolidWorks modeling software; design components for various fabrication processes including milling, turning, injection molding and sheet metal forming.
> Creates designs with appropriate dimensions, tolerances and part finishes while considering manufacturing technology; generates fabrication/assembly drawings of components & assemblies using ASME Y14.5 standards
> Reverse engineer complex components and assemblies; contributes to team effort by accomplishing related tasks as needed.
> Develop / design of fabrication & assembly drawings of system components/assemblies
> Resolve discrepancies by collecting and analyzing information, conferring with engineers, vendors, technicians and clients
> Identify & verify specifications by examining engineering docs & performing calculations

Job Requirements / Experience:
> 7+ years’ work experience in computer aided drafting with an Associate’s Degree in Mechanical Design or equivalent technical school training; U.S. Citizen is required
> 3-D modeling, SolidWorks (preferred)
> Experience in mechanical design and layout preferably in specialized packaging solutions
> Must have good mathematical background to handle common calculations
> Experience with machine processes, mechanical fabrication, materials and assembly processes a plus
 
Job Number: 023_2018
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: Long-Term / Temp-to-Perm
Start Date: ASAP
Input Date: 10/15/2018
Last Updated: 10/16/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer/Drafter

Description:
Location: Santa Fe Springs, CA
Rate: $29.25/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen or Permanent Resident****

Description:
Designer/Drafter your roles and responsibilities will include the following:
- Develop and maintain all Facility drawing packages.
- Develop and maintain system and sub-system drawing packages.
- Develop and maintain engineering manufacturing drawings associated with site.
- Incorporate redlines into existing drawings in multiple CAD systems.
- Must work with minimal supervision after initial orientation.
- Creates and revises site layouts, detailed parts, assemblies, and manufacturing engineering drawings from existing basic layouts, external references, and standard data residing in-house and in public databases to develop final drawings of site, devices, mechanical and piping (P&ID’s) utilizing computer-aided design (CAD).
- Completes new and revision detailing of model designs into layout drawings possibly prepared by others in accordance with standard engineering drafting practices on site.
- Determines scaling; inserts necessary reference planes, centering and dimension lines, hidden line interpolations, and sectioning for parts, assemblies; prepares complete production detail drawings.
- Contributes design modifications to improve quality of product or facilitate manufacturing operations.


Qualifications:
Required:
- High School Diploma with a minimum of 3 years Design/Drafting experience
- 2 years Design/Drafting experience using Inventor 2015 version or higher
- 2 years Design/Drafting experience using Autocad 2015 version or higher
- Working knowledge of NX 8.5.3 or higher
- Familiar with basic parametric modeling
- Proficient in Office 2010 version or higher (Excel, Work, Outlook, Power Point)
- Good understanding of Basic GD&T, version ASME Y14.5M-1994.

Preferred:
- Associates Degree with a minimum of 5 years Design/Drafting experience
- 5 years drafting experience using Inventor 2015 version or higher
- 5 years drafting experience using Autocad 2015 version or higher
- Full understanding of GD&T, version ASME Y14.5M-1994.
- Experience with CADKEY 1999
- Experience with NX 8.5.3 or higher
- Experience with TeamCenter PLM system
 
Job Number: 10003
Job Location: Santa Fe Springs, CA
Rate: $29.25/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 10/23/2018
Last Updated: 10/31/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafting/CAD Technician III

Description:
75% travel. Locations include: TX to Mexico, Minnesota.

Working Hours: Monday - Firday; 8am - 5pm

OT: Case by Case basis



Summary:


  • Will work with Project Managers, Project Engineers/Leaders to manage and create all drafted documentation associated with project.

  • The documentation will primarily be created using Solidworks, PRO E or AutoCAD and the scope of the job will span all elements of the project life cycle inclusive of gathering project requirements, preliminary and final design, procurement and As-Builts of equipment and materials, project monitoring and control.

  • Work will also include updating management of documentation for existing equipment systems.


Responsibilities:

CAD Operation/Design


  • Prepare design drawings, details and sketches from sketches, concepts or mark-ups provided by engineering or project management staff. Draw and plot drawings to scale, as required.

  • Work under the direction of the Project Manager to design complex drawings, such as P&ID, construction documents, routine design layouts, detailed drawings, equipment skid and piping.

  • Prepare complex drawings (e.g., PFDs, P&IDs, scaled equipment layouts and equipment details).

  • Prepare and work with bills of material (BOMs) and other construction documents.

  • Develop equipment/material schedules and material takeoffs from drawings or sketches. Support preparation of requests for bids for subcontractors and material vendors, as directed.


Additional Responsibilities:


  • Assist engineering and project management staff with day to day project functions, including researching product specifications, contacting vendors and other support functions as needed.

  • Maintain utilization by assisting with non-drafting project activities such as component assembly and hands-on work in the plant as appropriate.

  • Work as part of a collaborative team to balance workloads and ensure quality deliverables are produced on time.

  • Adhere to Corning practices, policies and procedures for document revision control.


Qualifications:



Education Required:


  • AutoCAD training (2yr Associates degree in Drafting Technology or Equivalent degree)


Skills/Aptitudes:


  • Customer focused, results-oriented professional and strong team player

  • Self-starter that demonstrates initiative, able to work with minimal supervision

  • Ability to take direction and act independently

  • Strong communications and organization skills

  • Ability to manage multiple priorities and stay organized


Level of Supervision:


  • Report to Engineering Manager or Project Leader

  • Manger will work with project management staff to set work priorities

  • Work independently based on instructions, directions or requests received from Supervisor and/or Sr. Project staff.


Experience: 10+ Years



Safety Equipment: Will reimburse for safety shoes under the Corning contract.



Manager Must Haves:


  • 10+ years CAD experience

  • Proficiency in SolidWorks/PRO E

  • Strong understanding of mechanical design fundamentals and practices

  • Strong written and verbal communication skills

  • Strong computer skills (Microsoft Word, Excel, PowerPoint)


Top Candidates will be shortlisted on 4/18
 
Job Number: 18-14766
Job Location: Corning, NY
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-05-31 00:00:00.0
Start Date: 2018-06-04 00:00:00.0
Input Date: 04/13/2018
Last Updated: 06/01/2018
Firm Name: NESCO RESOURCE
Attention: Anthony Kees
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS Design Engineer/Integration

Description:
Hello, my name is Brian Smith and I work for a company called 804 Technology. We are currently looking for an ECS Design Engineer (CATIA) for a long term contract job opportunity located in Fort Worth TX. The Design Engineer will be conducting design and analysis of the ECS and integrating the ECS into the aircraft in coordination with interfacing systems and system design. We are looking for an engineer to act as the ECS lead engineer with experience in developing system architecture, system requirements development, system sizing analysis, system performance analysis and a knowledge of system component suppliers. My contact information is listed below. If you are interested please respond be sending me your resume and your availability. Thank you in advance for your time. Rate is based on experience.
Brian Smith - 636-928-0330
The ECS Engineer is responsible for:
• Developing ECS requirements and architecture, including aircraft heating, cooling, defog, air filtration, and oxygen requirements
• Conducting design and analysis of the ECS and integrating the ECS into the aircraft in coordination with interfacing systems
• Managing supplier development and qualification efforts
• System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test, and aircraft/system qualification and certification
Qualifications
Education Requirements:
- Bachelor of Science Degree in Mechanical Engineering (or closely related technical field) is required.
- Master of Science Degree is preferred.
Position Requirements:
• Experience at all levels will be considered with a minimum of 2 years specific experience with ECS integration, development, and testing. At least 5 years experience is preferred.
• Familiarity with model based systems engineering
• Familiarity with RTCA DO-160, MIL-STD-810, and military and industry standards for ECS design
• Experience with creation of system specifications, requirements traceability, and verification. Preferred experience with Enovia and DOORS.
• Generation of Qualification and Test plans.
• Experience with ECS development and testing
• Experience with aircraft installation, functional testing, and troubleshooting
• Candidates must be eligible to obtain Secret Security Clearance
 
Job Number: 804-ECS/Design
Job Location: Fort Worth, TX
Rate: 65/hour
Per Diem: Split
Overtime: Yes
Duration: 6mos
Start Date: ASAP
Input Date: 05/14/2018
Firm Name: 804 TECHNOLOGY
Attention: Brian Smith
Address: 5381 HIGHWAY N STE 201
City, State: COTTLEVILLE, MO 63304
Phone: 636/928-0330
Fax Phone: 636/530-3693
Website: www.804technology.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer/Electrical Wire Designer III - (PA)

Description:
Supports the EDI Wiring Process & Tools teams to instantiate the necessary improvements driving quality and efficiency across BDS. Coordinate design teams across BDS enabling commonality at all levels of design. Coordinate a multi-disciplined and international team to achieve the EDI Deployment and Sustainment of the Capital Logic Component Library and Symbol Library. Primary duties include:

Enter and update parts in library as appropriate
Enable commonality of EDI Design and Standards across BDS
Execute BDS Library change control board decisions (both for components and symbology)
Develop necessary configuration control mechanisms and process documentation to enable a common library system that can support rapid design additions as well as multi-program derivations
Coordinate and support reduction of the backlog of parts and symbol entry needed for each program deployment. Support Deployment Specialists to keep program need dates up to date and hold program accountable to provide specification sheets when required for part entry
Coordinate the efforts of the distributed team of core librarians entering parts and symbols into the tool
Responsible for the overall quality of each component and symbol in the Capital Tools Suite Library
Provide guidance and query responses to core librarians
Coordinate and attend international calls to destinations such as India at reasonable hours for both parties.

Works under general direction.

Baseline description: Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers. Works under general direction.


Additional Experience Requirements:
Familiarity in wire design, wire installation
Experience in harness design.
Knowledge of Electrical System Design and best practices.
Knowledge of part standards.
Experience in Computer Aided Design and drafting standards.
Familiarity with Configuration and Data Management.
1 -2 to years of experience with the Mentor Graphics Capital tools suite (including Logic, HarnessXC, and Library)
Familiarity with CAD Tools, such as CEEDS, as well as EXCEL spreadsheets

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: EETechDesPA
Job Location: Ri, PA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 04/09/2018
Last Updated: 05/25/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ELECTRICAL ENGINEER - Midwest, OK

Description:
This position will support our Air Traffic Control and Landing Systems (ATCALS), B-1 and B-52 customers, by solving electrical sustainment issues. The sustainment projects address obsolete components in multiple instrumentation, control, power, electronic, electro-mechanical interface systems. The engineer will:
• Provide technical solutions
• Diagnose malfunctions in existing components and make improvements or modification to produce the desired results
• Develop technical documentation and publications relating to users, systems, processes, work flows, operations, products, and services.
• Create new electrical schematics
• Ensure proper system artwork generation
• Implement design changes of existing components
• Write engineering change orders
REQUIREMENTS
This position requires a Bachelors in Electrical Engineering. The candidate must have good oral and written communication skills. The candidate must have the ability to obtain a security clearance.
PREFERRED SKILLS
Aerospace, DOD or ATCALS experience are definite pluses. The ideal candidate will have experience with circuit design, signal/power analysis, instrumentation, EMI/radar and programming skills. Skills in SolidWorks Electrical and NI Circuit Design Pro are also preferred.
 
Job Number: KM0012
Job Location: Midwest, OK
Rate: OPEN
Input Date: 05/03/2018
Last Updated: 05/18/2018
Firm Name: MIDCOM CORPORATION
Attention: Kristine M.
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ELECTRICAL ENGINEER III - ELECTRONIC DESIGN

Description:
Johnson Service Group is currently looking for an Electrical Design Engineer for a Temporary position with our Customer in Warrendale, PA. through 2018

The Electrical Design Engineer will be responsible for design, layout, testing, and evaluation of electrical and electromechanical devices and systems. They will work as part of a multi-disciplinary product development team to assess customer needs, generate and analyze concepts, create requirements and specifications, and perform formal risk assessments. They will design parts and sub-assemblies, participate in cross-functional design reviews, and support the transition of projects from development to manufacturing and field service. They will create schematics, wiring diagrams, system diagrams and PCB layouts as well as check drawings to ensure they meet specification and follow best industry practices. Most importantly, the EE exhibits the desire and ability to collaborate, and excels in teamwork and communication. Our Customer is all about continuous improvement, and this professional thrives in such an environment.



Essential Functions:

Responsible for the design, and analysis of complex level electrical systems, equipment and PCB assemblies.
Conduct feasibility studies of new and modified designs exercising judgment within broadly defined practices and policies in selecting methods, techniques, and evaluation criteria.
Work on complex multi-product level problems where analysis of situations or data requires an in-depth evaluation of various factors.
Direct support personnel in the preparation of prototype fabrication.
Participate in multi-disciplinary technical teams to research, develop, test and evaluate solutions.
Evaluate issues and failures to determine root cause and potential solutions
Work on intermediate level component and subassembly problems where analysis of situations or data requires an in-depth evaluation of various factors.
Collaborate with software, mechanical, testing and other cross functional teams to perform FMEAs and risk assessments.
Mentoring and coordination of other engineers.
Direct support of customers, to include travel to off-site locations as necessary to evaluate field issues.
Educational Requirements:

BS degree in Electrical Engineering or equivalent
Required Knowledge and Skills:

4+ years of Electrical Engineering experience
Experience the electrical and cross functional aspects of a formal product development environment including schematic capture, PCB development, Bill of Materials, MRP systems and associated tools (including Orcad or Altium).
Demonstrated experience designing electrical and robotic subassemblies and systems
Understanding of architectural design concepts of machine controls and I/O systems
Able to effectively solve problems, work independently on system level designs and multi-task as required.
Good interpersonal and communication skills
Self-starter, capable of working independently as well as building strong cross functional collaborative relationships.
Must be able to work in a team environment and assist cross functional teams with the debugging of complex issues.
The candidate must be highly motivated to work in a fast-paced environment.
Strong written and verbal communication skills.
Proficient with the Microsoft Office Suite of Products.
Must be legally authorized to work in United States
Preferred Knowledge and Skills:

Familiarity with PCB development including footprint generation and PCB layout a plus.
Familiarity with motion controllers, servo- and stepper- motors, and networked I/O systems a plus.
Experience with Product Lifecycle Management (PLM) tools and ECR, ECO processes.
Experience in LabView
Working experience with FDA regulated, ISO13485, or other highly regulated environments.
Work Conditions:

Office Environment
 
Job Number: 364448
Job Location: Warrendale, PA
Per Diem: Possible
Overtime: Possible
Duration: 12/2018 +
Start Date: ASAP
Input Date: 04/04/2018
Last Updated: 05/21/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS 3-D Wire Router

Description:
EWIS 3-D Wire Router - Cabin Development

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
Ideal Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to:
- 3D wire routing
- EWIS
- Cabin Management System
- Cabin Entertainment System
- Cabin Lighting
- Cabin Switch Controls
- Telephone System
- Satellite communications
- Water System
- Waste System
- Cabin interior monuments
- Seats

Education and Experience Requirements:
High School Diploma/GED required
 
Job Number: 9081
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/04/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS 3-D Wire Router - Cabin Development

Description:
• In Cabin Development, we design, engineer and certify the next generation of cabin interiors.

Education/Skills
• Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to:
3D wire routing, EWIS, Cabin Management System, Cabin Entertainment System, Cabin Lighting, Cabin Switch Controls, Telephone System, Satellite communications, Water System, Waste System, Cabin interior monuments, Seats

Software experience preferred:
• Catia V5
• SmarTeam
• Capital Logic (Mentor Graphics)
• Office Suite (Word, Excel, Power Point, Outlook)
 
Job Number: 24-247
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 05/04/2018
Last Updated: 08/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Avionics Engineer

Description:
JOB SUMMARY:
Principal responsibilities include design and integration of aircraft avionics and electrical systems for modifications.
JOB RESPONSIBILITIES:
• Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD, Mentor Graphics and/or IAI HarnesSys)
• Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft
• Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents
• Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc.
• Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.
• Assist with the development, design, testing and certification documentation for new or modified printed circuit board modules for aircraft
EDUCATION/ EXPERIENCE:
• At least 2 years of related experience
• Bachelor’s Degree (or equivalent industry experience) in: Electrical Engineering, Computer Engineering or Electrical/Electronic Engineering Technology, or related technical degree.
• Electronic drafting experience with CATIA-CADAM Drafting (CCD), Mentor Graphics and/or IAI HarnesSys desired.
• C/C++ and assembly programming experience or coursework desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus.
• Experience with avionics and electrical system design to the requirements of CFR 14 Parts 23 & 25 is desired.
• Experience with 3D modeling and drafting using CATIA V5 file based/Enovia and/or CATIA V6/Enovia is beneficial.
 
Job Number: 87958
Job Location: multiple
Rate: open
Per Diem: possible
Overtime: possible
Duration: Long Term
Start Date: ASAP
Input Date: 07/25/2018
Last Updated: 01/22/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Performs design and drafting of both electrical and mechanical aspects of electronic equipment. Lays out printed circuit boards; designs wiring harnesses; performs layout drawing and checking of schematic diagrams as supplied in rough form by electrical engineering; makes wiring diagrams from schematic diagrams (vice-versa). Performs overall chassis and housing design/drafting, including overall system packaging. Designs front panels, chassis, brackets, card cages. Assists in selection of components such as connectors, terminals strips, switches. Produces schematic diagrams and/or CAD drawings for submission to customers, plant, operations or outside vendors to produce the specified wiring harnesses, printed circuit cards, mechanical support to batteries, LRU and generating elements specified to assemble a complete electronic device. Output must be able to be entered directly into data management configuration control.
 
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 05/08/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Designer

Description:
Prefer design experience with relevant applications in a defense environment. Ability to create and interpret electrical and mechanical drawings. Ability to apply EE concepts and formulas at the subsystem level. Ability to independently design, test, integrate, and document designs to a simple subsystem level based on provided requirements. Ability to independently create PCB layouts and complete the design of boards of medium complexity. Ability to test and troubleshoot existing released vehicle subsystems. Ability to independently support customers (manufacturing and field) with vehicle and box level problems. Expert knowledge of CAD drafting/modeling and design techniques. Good planning, time management and organization skills. Good communication and interpersonal skills. Ability to explain concepts to personnel unacquainted with the field of expertise. Good presentation and report writing skills. Ability to work as part of a team. Ability to make presentations to department managers and staff. Ability to train less experienced staff.
 
Job Location: MN
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 05/08/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/31/2017
Last Updated: 01/22/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Assembler

Description:
Under limited supervision performs a wide variety of tasks through verbal or detailed instructions in support of a manufacturing/production environment with no instructions needed on routine work, and general instructions given on new lines of work or special assignments.
Duties include assembly, disassembly, re-assembly, fabrication, minor repair and/or minor rework of surface mount and/or through hole printed circuit card assemblies, sub-assemblies, and/or electro-mechanical assemblies.
RF experience is a plus. Duties include (but not limited to) board and/or component preparation, touch up, manually soldering components.
Performs modifications or upgrades or removal of and/or replacement of standard electro-mechanical, surface mount, through hole components.
May perform in-process self checks on items prior to submitting to formal inspection and/or test personnel. Works with electronic/electrical hand tools using drawings, wire lists and technical repair standards.

Hourly Rate: $17
 
Job Number: KM0010
Job Location: Chesapeake, VA
Input Date: 04/27/2018
Last Updated: 05/18/2018
Firm Name: MIDCOM CORPORATION
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Design Engineer

Description:
Location: Orlando, FL
Rate: $50.00 - $55.00/HR
Duration: 6 month contract position
Schedule: 9/80

**Candidates must be U.S. Citizens**

Duties:
- An Electromechanical Design Engineer is responsible for the design, documentation and production floor support of hardware (missile electronics, missile electrical cabling, airborne support equipment, ground support equipment and test sets.
- Additional duties include investigation of discrepant hardware and test anomalies.

Skills:
Required:
- Design experience with electrical cables, test sets, breakout boxes, 19” support equipment rack design
- Proficiency with Creo Parametric 2.0 Cabling and Intralink.
- Proficiency with ASME Y14.5M-1994 and generating detailed engineering drawings.
- Proficiency with reading schematics for electrical cable assemblies in order to define and select connectors, backshells, splices, wiring, etc.
- Basic computer skills and a working knowledge of Microsoft Office products (Word and Excel)
- Compliance to quality and safety policies at all times!
- Must be a US Citizen
- Physical Requirements – This work requires delicate handling, reaching, light lifting and may require a combination of sitting and standing as well as walking between test locations and occasional use of small step-ladders.

Desired:
- Experience with design of flexible and semi-rigid RF cables

Education:
- Must have at minimum a Bachelor of Science degree in an Engineering related discipline.
 
Job Number: 8769
Job Location: Orlando, FL
Rate: $50.00 - $55.00/HR
Per Diem: Per Diem Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 03/15/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 04/07/2017
Last Updated: 01/22/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Specialist

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Electronics Specialist
(U.S. Citizenship Required*)
Tallahassee, FL
2018-5914

Responsibilities:
• Perform troubleshooting of production hardware including but not limited to circuit cards, harnesses, electrical boxes and vehicle harnesses.
• Perform routine testing of production hardware at the box and circuit card level using automated, semi-automated bench top equipment.
• Perform troubleshooting of production electro-mechanical production hardware
• Support Test Engineering and Manufacturing Engineering in the identification and resolution of production yield issues and customer returns/complaints.
• Adequately record results in troubleshooting, testing and investigations to ensure all aspects of our Quality and Manufacturing systems are fulfilled.
• Performing hand-check testing on certain hardware using appropriate meters.
• Work with Test Engineering to trouble-shoot test station issues and write documents for items not working properly.
• Write up test equipment issues

Qualifications:
• Must be familiar with the use and operation of various types of test and measurement equipment to include; oscilloscopes, digital multi-meters, power supplies, logic analyzers, bus analyzers etc.
• Must be computer literate and familiar with standard computer applications like MS Word & Excel, email, etc
• Able to learn our systems at an accelerated pace.
• Familiarity with DITMCO and VXI a plus.
• Able to read, interpret, and use drawings and schematics for troubleshooting of production hardware.
• Must be a US citizen capable of obtaining a Security Clearance.
• Able and willing to work overtime during the week and weekends.
• Must be able to wear PPE including protective shoes and glasses.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Associated Degree in Electrical or Electronics Engineering Technology (ASEET) or equivalent (additional experience or military training will be considered in lieu of degree)
• 2-5 yrs related work experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5914
Job Location: Tallahassee, FL
Rate: Based on experience
Input Date: 05/03/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Jeremy Israel
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer

Description:
Per Client 'US Citizenship Required'

The engineer in this position will apply knowledge of Mechanical design principles to assess and resolve product/process issues through the product lifecycle. Analyze requirements, design systems and structures, participate in formal design reviews, and release associated drawing through the company release process. Apply engineering principles to research technical, operational and quality issues and design interim and engineering solutions. Identify documents, analyze and communicate design; recommend resolutions. Support Integrated Product Teams (IPT) and actively organize and participate in design review.


Skills Required:
• Strong understanding of mechanical engineering principles, materials, mechanics and heat transfer.
• Strong verbal and written communication skills.
• Highly motivated
Experience Required:
• 3+ years Creo.
• 5+ years design and drafting.
• BS Mechanical Engineering.
Skills Preferred:
• MS Mechanical Engineering.
• ProE.
• GD & T - 1+ years circuit board / electronics design and drafting
TEMP TO HIRE POSITION
 
Job Number: 27938
Job Location: Manassas, VA
Rate: 38.00
Per Diem: No
Overtime: Possible
Duration: Temp to Hire
Input Date: 05/08/2018
Firm Name: TAD PGS INC
Attention: Terry Bentley
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 714/622-3967
800 Phone: 800/261-3779
Fax Phone: 714/897-8455
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Electromechanical - 3 / active secret preferred / CREO / electronic packaging CA

Description:
1631
Engineer Electromechanical - 3 (Job Number: 18002041)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Mar 19, 2018

Target End Date: Mar 15, 2019

Pay Rate: $58/hr. - $60/hr.

Work Week: 9/80

Location: Redondo Beach, CA

Duration: 1 year

The responsibilities include mechanical design & analysis using computer-aided design (CAD), conducting packaging trades, tolerance and interference analyses, generating drawing packages & associated electronic data, and supporting the fabrication, assembly and test of the hardware.


Basic Qualifications:

•5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.
•A Bachelor of Science degree in a STEM (Science, Technology, Engineering or Math) discipline
•Electronic packaging, CAD, or mechanical design experience in an aerospace environment
•Demonstrated technical skills with experience supporting a multi-disciplined team
•Experience working with different partners across organizations and programs
•Proficient in performing tolerance and interference analyses
•Experience in generating and releasing product detail and assembly drawings
•Experience with PTC Creo / Intralink software applications



Preferred Qualifications:

•A Master’s Degree in Mechanical or Aerospace Engineering and 4+ years of engineering experience in an aerospace environment
•Experience with electronic packaging / mechanical design for airborne & space applications
•Electronics design development and sustaining experience spanning cradle to grave
•Experience with Enovia PLM software application
•Proficiency with electrical design, electronics manufacturing processes and qualification activities
•Familiarity with research and development of advanced packaging technologies
•Active DoD Secret or Top Secret, and/or SCI clearance
 
Job Number: MB-1631
Job Location: Redondo Beach, CA
Rate: 58-60/hr
Per Diem: no
Duration: 12 month contract
Input Date: 06/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer III MUST HAVE DO-178B / EXPERT-LEVEL in ANSI C and ASSEMBLY / LOW LEVEL SW & device drivers CA

Description:
Job Title: Engineer III
Work Site: Irvine, CA
Job Number: 5493

Start Date: ASAP
End Date: 12/31/18
Position Type: Contract
60/hr max
6 months +

Job Summary

Can work remotely.
MUST HAVE DO-178B / EXPERT-LEVEL in ANSI C and ASSEMBLY / LOW LEVEL SW & device drivers

Proficiency with RTCA/DO-178B development and verification; expert-level fluency in ANSI C and assembly, expertise with low-level software including device drivers, interrupt service routines, etc.

Job Description

Roles and Responsibilities
Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.).


Qualifications and Education Requirements

· Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.
· Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience.
· Has thorough knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies.
· Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.
· Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.
· Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.
· Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.
 
Job Number: JK-5493
Job Location: Irvine, CA
Rate: 60/hr max
Per Diem: no
Duration: 6 months
Input Date: 05/14/2018
Last Updated: 06/04/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Specialist - Mechanical Systems

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Engineer Specialist - Mechanical Systems
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-5915

A Structure and Survivability Design Engineer is needed to lead the design and development of ground combat vehicle structures, armor and spall liner.

Responsibilities:
• Design of weld joints for steel and aluminum structures
• Develop engineering design concepts via CAD software
• Design of structures, appendages, armor and spall liner for various military vehicle platforms
• Work with design services (drafting) to create detailed drawings
• Provide technical support to other engineering organizations
• Address manufacturing, procurement and field problem reports
• Present design concepts and program status to functional and program management

Qualifications:
• Self-starter, highly motivated individual
• Knowledge of welding and metal fab desired
• Extensive knowledge of model and drawing creation required
• Knowledge of GD&T required
• Experience using Pro/e, Unigraphics or other 3-D CAD software required
• Knowledge of ballistic threats and basic principles of armor design desired
• Must be Proficient in Microsoft Office (Word, Excel, and PowerPoint)
• Occasional travel may be necessary
• Excellent interpersonal and communication skills required
• Must be able to obtain a security clearance
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Required B.S. in Mechanical Engineering and 10+ years of experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5915
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 05/03/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Jeff Prukop
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Contractor - Interiors Design

Description:
Mechanical Engineer required for Completions Design / Aircraft Cabin Interiors. -Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues. -Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
 
Job Number: 18-130761
Job Location: Southeast
Rate: Open
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 05/25/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Manager

Description:
Engineering Manager (Mechanical Systems) needed for an immediate full time opportunity with our client in the Burlington MA area. This position will manage a team of cross functional Mechanical Engineers. For further information and immediate consideration please apply below and call me today.



James St. Pierre - Branch Manager - Nesco Resource, LLC - 603.417.3001 - jstpierre@nescoresource.com



Key Responsibilities and Activities


  • Lead a team of mechanical engineers in the delivery of product and projects

  • Act as a liaison between your team and the Director of Mechanical Engineering

  • Work with program management to clearly outline alternatives, pros/cons, and risk mitigations to different projects

  • Implement engineering best practices and programs that motivate the engineering team to excel within the product development process

    • Ensure that these practices are in place and followed



  • Provide support to the engineering team, when needed

  • Provide technical advice on any problems, when appropriate

  • Maintain a positive work environment and address any safety concerns

  • Anticipate any upcoming obstacles and deadlines;

    • Ensure the team stays on task and is moving towards the goal




Required Skills and Experience


  • Bachelor\'s degree or higher in Mechanical Engineering or a related engineering discipline with 5+ years of experience

  • Minimum of 2 years supervisory experience

  • Excellent written and verbal communication skills, as well as presentation skills, including the ability to express ideas concisely and clearly cross-functionally and at all levels within the company


Desired Skills and Experience


  • Experience in low volume automotive environment

  • Experience in a manufacturing environment




 
Job Number: 18-13437
Job Location: Woburn, MA
Rate: 130000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-23 00:00:00.0
Input Date: 04/04/2018
Last Updated: 05/18/2018
Firm Name: NESCO RESOURCE
Attention: James St Pierre
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer IV (Seal Beach, CA)

Description:
Supports the computer-aided design (CAD) development and documentation of mechanical, hydraulic , propulsion and flight controls Maintenance Ground Operations Systems (MGOS) ground support equipment (GSE) tooling design. Supports the development, testing and/or modification of GSE systems, components and installation designs/drawings to provide design documentation to downstream groups. Profficient with Geometric Tolerancing and Drawing Release (PDM / ENOVIA).Generates GSE CAD 3-D models (in CATIA V5) and documents analyses to validate and verify GSE and components meet requirements and specifications. Produces First Pass Quality (FPQ) GSE designs and drawings per MGOS standards, processes and Desk Instructions. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EquipToolEngSB
Job Location: Seal Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 05/11/2018
Last Updated: 06/01/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Equipment & Tool Engineer 4
(U.S. Citizenship Required*)
Seal Beach, CA
2018-5982

Responsibilities:
• Support computer-aided design (CAD) development and documentation of mechanical, hydraulic, propulsion and flight controls Maintenance Ground Operations Systems (MGOS) ground support equipment (GSE) tooling design.
• Support development, testing and/or modification of GSE systems, components and installation designs/drawings to provide design documentation to downstream groups.
• Proficient with Geometric Tolerancing and Drawing Release (PDM / ENOVIA).
• Generate GSE CAD 3-D models (in CATIA V5) and documents analyses to validate and verify GSE and components meet requirements and specifications.
• Produce First Pass Quality (FPQ) GSE designs and drawings per MGOS standards, processes and Desk Instructions.
• Contribute to supplier development, test and production activities and direct supplier to optimize integration and achieve program goals.
• Support system components' designs/proposals standards to provide installation and detail documentation.
• Train others. Work under general direction.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience.
• Degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5982
Job Location: Seal Beach, CA
Rate: Based on experience
Duration: 9 Months
Input Date: 05/11/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Gregory Schaal
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer (US Citizen)

Description:
Design, implement and maintain test processes for Space Systems hardware using lean philosophies and techniques.
Take a leadership role in driving action in the development, planning and implementation of timely and effective corrective actions for problems during product manufacturing and testing.
This can involve testing, data analysis and interfacing with all aspects of the Engineering Department.
Responsible for the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
Will have daily interface with Program, Manufacturing, Quality and Engineering organizations, to ensure that customer committed hardware and data deliveries are consistently met.
Support laboratory testing of Space Station hardware.
Develop and validate tooling concepts.
Author and maintain operation/test procedures.
Preparation of standardized operation/test sheets.
Define test rig and facility requirements.
Participation on program Integrated Product Development teams.
Review drawings and concepts and resolve producibility concerns.
Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW is desired.
Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans and accumulators.
The applicant must have the capability of working independently and be motivated. Excellent communication skills, written and verbal are required.
The ability to proficiently operate common Microsoft Office applications (Word, Excel, Access, Outlook Power Point etc) software products is required.
This is a 'safety-sensitive' position as prescribed by NASA. Special drug testing/training needed and inclusion in the random drug/alcohol program is required.
This position may include off-shift work hours, as needed.
 
Job Number: 42352
Job Location: Windsor Locks, CT
Per Diem: yes
Overtime: possibly
Duration: 12 months
Start Date: asap
Input Date: 05/04/2018
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Jane Rochford
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6336
800 Phone: 866/277-3343
Fax Phone: 860/623-8228
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrument Engineer

Description:
Flight Test Instrument Engineer

Location: Windsor Locks, CT
Pay Rate: $67/hr
Duration: 12 Month W2 Contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met. Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns.

Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators. Applicant must have the capability of working independently and be self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

This position may include off-shift work hours as required.

Education:
-Bachelors or higher required
-6+ years of directly related experience
 
Job Number: 9072
Job Location: Windsor Locks, CT
Rate: 67.00/Hr
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 05/08/2018
Last Updated: 06/04/2018
Firm Name: INCONEN CORPORATION
Attention: Rex
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineer

Description:
Job Description
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met. Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns.

Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators. Applicant must have the capability of working independently and be self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.
 
Job Number: CT0169
Job Location: Windsor Locks, CT
Rate: 65.00
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Input Date: 05/03/2018
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
GROUND TEST AND AIRCRAFT INSTRUMENTATION TECHNICIAN

Description:
Ground Test and Aircraft Instrumentation Technician

15+ Months Contract Opportunity

Stratford, CT

Work from Engineering Requests, Procedures and Drawings with limited guidance; to Fabricate, Install, Check-out, Diagnose, and Trouble-Shoot Instrumentation Data Acquisition Systems/Sensors in support of Ground and Flight Test Programs.

Requires planning, building and terminating the various cable harnesses required in the Instrumentation System.
Assist in performing System and sensor calibrations.
Working environment consist of the Structural Test Lab, Remote Test Stands ( Engineering & Quality Assurance ) as well as Offsite support to include Aircraft Instrumentation .
Requires a good working knowledge of Instrumentation Sensors, slip rings, and data acquisition systems.

Must possess a strong Mechanical and Electrical background and familiarity with Strain Gages and their circuitry, linear displacement and vibration transducers, measurement systems, instrumentation wiring and documentation.
Ability to perform strain gage installations preferred.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
 
Job Number: 365889
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 05/10/2018
Last Updated: 05/21/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

Hydraulic Systems Specialist

Description:
PDS Tech is seeking a Hydraulic Systems Specialist for the Flight Control System Design Group, Regional Jet Development Project.

This position is located in Nagoya, Japan.  You may be requested to relocate to Seattle or Moses Lake (Washington State, USA) where aircraft flight testing is performed. It may also be requested to travel to systems supplier sites to manage the Hydraulics Gear technical contract.

SUMMARY of Responsibility
* Leading the development and finalization of the airplane’s design, being compliant to all applicable requirements,
* Responsible for leading activities of the Hydraulics System. This will include interfacing with all other aircraft functions and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft Landing Gear System,
* Work as a team member in a multi-cultural and international working environment in Japan Headquarters. Japanese Language skill is not required.
 
Responsibilities include but are not limited to:
(1) Develop and finalize the company’s airplane’s design, compliant to all applicable Landing Gear Structural and Mechanical System Requirements,
This activity includes;
(a) Evaluate the current aircraft design, with respect to compliance to the Landing Gear related airworthiness regulations of JCAB, FAA and EASA,
(b) Coordinate integration of design change activities originated from Landing Gear requirements when required,
(c) Present and Discuss the Hydraulic System compliance with the Transport Authorities,
(d) Lead verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.,
(2) Initiate/review related documents, technical calculation, interface discussion with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
(3) Manage the technical contract requirements with applicable Hydraulic System suppliers and other interfacing suppliers as appropriate,
(4) Provide expertize to assist in resolving the Hydraulic System performance during any rig testing or Flight testing,
 (5) Performs other duties as may be assigned.
 


Educational Requirements:
* BS Degree in Engineering; Mechanical or Aerospace/Avionics preferred  
Professional Requirements:
* 4 years of testing experience in Environmental or Mechanical (i.e., hydraulic, flow, static load, and dynamic/shock/vibration)
* Experience with developing project time estimates, costing and quoting
* Design/Fabrication experience with test setups
* Landing Gear Structural and Mechanical design experience is preferred
* A strong working knowledge of Military, Aerospace, Telecom, and Commercial Specifications is highly desired.
Other Requirements:
* Must have excellent written and verbal communication skills in English
* Knowledge of customer service principles, techniques, systems and standards
* Needs the ability to develop, plan and implement short and long term goal.
* Ability to foster a cooperative work environment
 
Job Number: 1710076138
Job Location: Nagoya,
Duration: 12 months
Input Date: 04/06/2018
Last Updated: 01/22/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023MntAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulics and Landing Gear DER

Description:
Position Purpose:
Responsible for the design, research and development of advanced new applications resulting in new product/business for the company.

Unique Skills:
• Current Mechanical Systems Hydraulic DER
• This position will need the following delegations on Chart C1, Systems and Equipment (Mechanical Equipment): B1, B2, B7, F1, F2, F7, G1, G2 and G7.

Education and Experience Requirements:
• Bachelor's Degree in engineering, a related curriculum required or equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job.
• Fifteen (15) + year’s progressively responsible engineering exp in specific tech discipline with Bachelors. Exp credit considered for related adv degrees limited to 2 yrs Masters, 4 yrs PhD in fields applicable to this job. Requires approval of Eng PRB include bus justification.

Principle Duties and Responsibilities:
• Plans R&D programs and recommends technological application programs to meet corporate objectives
• Proactively promotes process initiatives that improve the balance of technical product, cost and schedule
• Applies cutting edge theories and technologies by exhibiting an exceptional degree of ingenuity, creativity and resourcefulness
• Champions and develops innovative principles and ideas
• Often acts independently and exercises wide latitude in determining objectives and approaches to critical assignments
• As a recognized expert in the field, provides consultative services to senior/executive leaders both within the company and the industry Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-229
Job Location: Savannah, GA
Rate: $135.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 07/20/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Inspector

Description:
Notes from the Hiring Manager:

<> The Inspector should have experience inspecting cables and mechanical parts within a manufacturing environment , preferably with a mechanical background instead of electrical
<> They will receive multiple parts, which will be a mixture of cables and mechanical parts but vary from day-to-day; they should be able to see the part and know how to proceed with inspection, or at least be able to read the engineering drawings.
<> Experience with inspection tools such as Calipers, Measuring Devices / Equipment, Tape Measure, Feeler Gauge, etc
<> IPC 610 or 620 Certification is a plus


Summary:

To perform checks, tests, gauging, and instrument inspections of materials, goods in process, and finished goods.

Job Description:

> Performs audits, tests & inspections of materials, goods in process or finished goods within value stream (receiving through final system assembly) assuring quality first by determining compliance to drawings, procedures & specifications
> Applies established inspection procedures & uses simple inspection/testing tools and instruments of a “go/no go” nature.
> Develops and/or uses test and inspection set-ups utilizing mechanical and/or electrical test measurement equipment.
> Inspection methods and limits require good judgment and interpretation.
> Requires interpretation of inspection plans, tests and procedures.
> Recommends changes to procedures, processes, and drawings to improve efficiency and/or quality of the product.
> Identifies and documents nonconforming material in accordance with applicable procedures.
> Assists and trains others in assuring the proper test, measurement, and procedural operations.
> Ensure adherences to policies and procedures accordingly.
> Practices Total Quality principles and concepts.
> Acquire IPC-610/STD 001 and IPC-620 Certifications as applicable

Qualifications:

> 1-2 years related experience with a High School diploma preferred
> Knowledge of manufacturing and quality assurance processes and/or procedures.
> Knowledge of military and commercial quality specifications.
> Knowledge of Statistical Process Control.
> Knowledge of digital and analog circuitry.
> Knowledge of electrical and/or mechanical inspection.
> Knowledge of workmanship standards.
> Knowledge of packaging and preservation requirements.
> Understanding of Total Quality principles and concepts.
> Ability to communicate effectively verbally and in writing.
> Ability to use electrical and mechanical inspection equipment.
> Ability to develop and use simple to complex inspection set-ups.
> Basic algebraic skills.
> Ability to read, analyze and interpret detailed specifications, drawings, procedures, and schematics.
> Ability to work effectively within a team environment
 
Job Number: 024_2018
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 12+/- Months
Start Date: ASAP
Input Date: 04/02/2018
Last Updated: 05/29/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrumentation & Start Up Engineers - Food & Beverage Background

Description:
Plans, conducts, or coordinates Process Engineering functions covering all aspects of material handling and unit process operations as applied in the production of wet and dry pet foods, pet treats, and cat/dog litter. Technical emphasis will be on instrumentation, system functional descriptions, and systems startup of equipment to meet deliverables for production systems, quality/sanitation, and equipment design.
PRIMARY RESPONSIBILITIES:
90% - Provide Process Engineering design and review for capital projects including detailed phases of the process engineering work, related documentation, and field support. Requires coordination of work by outside consultants and suppliers, broad knowledge of precedents in the specialty area, and an understanding of principles and practices in related specialties. Requires strong communications skills and ability to perform well on teams.
10% - Provide process engineering technical assistance to operating facilities. Includes planning/implementing investigation and analysis in problem areas or areas of opportunity for process improvement. Requires ability to collaborate with and contribute to cross functional teams.
BASIC QUALIFICATIONS (Minimum):
Education:
Minimum Bachelor of Science Degree inEngineering – Mechanical, Industrial or Chemical
 
Job Number: Instru-Nest
Job Location: St. Louis, MO
Rate: $70.0/hour+
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 05/10/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Mechanical Design Engineer

Description:
Interior Mechanical Design Engineer

Location: Savannah, GA
Pay Rate: $50.40/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
-Mechanical Engineer required for Completions Design / Aircraft Cabin Interiors.
-Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
-Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
-Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
-Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
-Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues.
-Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items. Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.

Education and Experience Requirements:
Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job. 18 months of related Engineering experience. Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.

Position Purpose:
Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Company
aircraft.

Principle Duties and Responsibilities/Essential Functions:
1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements
Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise
Perform other duties as assigned.

Other Requirements:
1. The level of technical skills and abilities appropriate for this grade will be established by each discipline.
2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.
3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources.
4. Ability to convey technical concepts in both written and verbal formats.
5. Contacts are primarily within the organization, with occasional customer contacts on routine issues.
6. Works under general supervision for routine tasks of minor complexity.
7. With supervision/mentorship, can coordinate the activities for lower level engineering staff.

Send your resume to rex@inconen.com if qualified
 
Job Number: 8795
Job Location: Savannah, GA
Rate: 50.40
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/21/2018
Last Updated: 05/23/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Journeyman Mold Maker

Description:
Work Schedule: M-F 8am to 5pm. Possibility of overtime, especially when travelling.



NON-EXEMPT - (Will spend some time working on engineering level work and some time spent working on technician level work)



Work location with be in Reynosa, MX. Shuttle will travel from McAllen, TX daily to and from the plant at set hours. No overnight stays in MX.





Scope of Position: Support Corning Mold Development Engineering with release of new molds, and development of new injection mold components and fixtures. This includes mold tooling analysis during production and new tooling or fixture release.



Day to Day Responsibilities:

• Tool Maker ability to build new and repair components

• Tool Maker ability to PM mold / dies

• Tool Maker ability to diagnose tooling issues and suggest solutions

• Use of Mastercam to program CNC mills / lathes

• Support tool shop operations through close tolerance machining operations (i.e. high speed, CNC, EDM's, grinding, lathes, mills)

• Reduce set up time and machining time through process improvements

• Inspection of close tolerance mold steel components

• High speed machine electrodes for tight tolerance components

• Design fixtures and components and high speed machine final product

• Improve efficiency, reduce costs, 5S, visual factory and departmental / plant goals and objectives

• Understanding of common tool shop metals, cutters, hardness



The above description covers the most significant duties performed but does not exclude other occasional work assignments not mentioned.



Required Education / Experience:

• Minimum High School/General Education Diploma or equivalent work experience

• Preferred two year associate degree in Tooling Technology, drafting or Equivalent

• Preferred advanced trades mathematics preferred



Required Skills:

• Proficient with Mastercam with 5 plus yrs. experience ( version X8 and up)

• 5 plus yrs. in tool shop experience (i.e. high speed, CNC, EDM's, grinding, lathes, mills)

• Independently program, setup, operate and troubleshoot CNC mills and other shop equipment

• 3-5 years knowledge of injection mold tooling through mold building, repair and design

• Experience with Microsoft office software (word, excel)

• Mechanical Aptitude, strong attention to detail

• Ability to handle multiple tasks and work independently

• Good oral and written communication skills through e-mails, reports, and meetings

• Maintains a safe work environment by adhering to safety procedures and regulations

• Fluent in both spoken and written English; Spanish is a PLUS



• Ability to maintain equipment by completing preventive maintenance requirements; follow manufacturer's instructions; troubleshoot malfunctions; or call for repairs.

• Ability to plan machining activities by reviewing work orders, drawing specifications, and materials.

• Documents and communicates actions, issues, and continuing needs





Desired Skills:

• SolidWorks or Pro-E experience / training

• Experience understanding and troubleshooting common defects of injection molding





Soft Skills:

• Project management skills / classes

• Strong personal and collaborative working skills

• Self-Starter



Working Conditions:

• Standing/walking on your feet for approximately 6-7 hours per day

• Must be able to lift 40 pounds and stand or sit for extended periods of time

• Up to 25% travel may be required to regional and/or international locations for training or project work.

• Working with chemical substances, oils, odors, none disagreeable

• Will require use of PPE, such as ear protection, safety shoes, safety glasses, etc.
 
Job Number: 18-14990
Job Location: McAllen, TX
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-05-20 00:00:00.0
Start Date: 2018-05-21 00:00:00.0
Input Date: 04/13/2018
Last Updated: 06/01/2018
Firm Name: NESCO RESOURCE
Attention: Anthony Kees
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liquid Propulsion Project Engineer - Level 3 / Level 4

Description:
Location: Canoga Park, CA
Rate: DOE
Duration: 6+ month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Candidates must be able to obtain a Secret Clearance **
** Looking for candidates with Liquid Propulsion Project Engineering experience **
** Level 3 candidates will have 3 to 6 years of experience. Level 4 candidates will have 7+ years of experience **


Duties:
This role will work on the development, fabrication and test of liquid propellant propulsion engine systems. The Project Engineer will plan and perform propulsion program tasks in conjunction with program management. Under general direction, you will implement design and analysis tasks, special studies, experiments, and hardware/test requirements. You shall also have the ability to successfully:
- Provide imaginative, thorough, and practicable solutions to a wide range of technical problems involving the conventional utilization of engineering techniques
- Conceive and plan projects involving conventional and the development of new methods to attain program objectives
- Provide direction in problem investigations and resolution across functional areas
- Lead investigation activity if sufficient experience in investigation of tools and procedures has been demonstrated
- Prepare technical and design requirements in support of project goals
- Keep current in relevant technologies and methods in support of project assignments
- May provide technical guidance to less senior project engineers and project support personnel


Skills:
**Candidates must have an active Secret clearance or have had an active Secret clearance within the last two years**
65% - Support Engineering teams working on rocket engine development and production program tasks/problem resolution, etc. Coordinate engineering work; manage technical progress, risk, schedule, and cost as needed. This includes all technical aspects of programs including external suppliers, test, and verification support.
15% - Monitor technical progress and interface with Program Management, company customers, and other company functional organizations to understand and develop resolution to program technical issues.
10% - Provide technical consultation to Program Management and Business Development organizations for business development activities such as writing white papers or preparing and presenting technical briefings to customers.
5% - Support the technical lead on proposals to government customers or prime contractors for propulsion development or technology programs.
5% - Provide inputs to written and verbal status reports to Engineering lead, company Management, and provide input and leadership at product team meetings.


Education:
-Requires a Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related discipline, and five (5) or more years of directly related experience.
-CAD knowledge is desirable.
-Working knowledge of Microsoft Office software is required.
 
Job Number: 8986
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Start Date: ASAP
Input Date: 09/12/2018
Last Updated: 10/01/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liquid Propulsion Project Engineer - Level 3 / Level 4 with active secret CA

Description:
Job Title: Liquid Propulsion Project Engineer - Level 3 / Level 4

Number of Positions: 2

Remaining Positions: 2


Duties:

Additional Information: CANDIDATES NEEDED! Manager is active. Active Secret clearance required or active within last 2 years.

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have an active Secret clearance or have had an active Secret clearance within the last two years **



** Looking for candidates with Liquid Propulsion Project Engineering experience **



** Level 3 candidates will have 3 to 6 years of experience. Level 4 candidates will have 7+ years of experience **





This role will work on the development, fabrication and test of liquid propellant propulsion engine systems. The Project Engineer will plan and perform propulsion program tasks in conjunction with program management. Under general direction, you will implement design and analysis tasks, special studies, experiments, and hardware/test requirements. You shall also have the ability to successfully:



Provide imaginative, thorough, and practicable solutions to a wide range of technical problems involving the conventional utilization of engineering techniques
Conceive and plan projects involving conventional and the development of new methods to attain program objectives
Provide direction in problem investigations and resolution across functional areas
Lead investigation activity if sufficient experience in investigation of tools and procedures has been demonstrated
Prepare technical and design requirements in support of project goals
Keep current in relevant technologies and methods in support of project assignments
May provide technical guidance to less senior project engineers and project support personnel
Skills:
65% - Support Engineering teams working on rocket engine development and production program tasks/problem resolution, etc. Coordinate engineering work; manage technical progress, risk, schedule, and cost as needed. This includes all technical aspects of programs including external suppliers, test, and verification support.



15% - Monitor technical progress and interface with Program Management, Aerojet Rocketdyne customers, and other Aerojet Rocketdyne functional organizations to understand and develop resolution to program technical issues.



10% - Provide technical consultation to Program Management and Business Development organizations for business development activities such as writing white papers or preparing and presenting technical briefings to customers.



5% - Support the technical lead on proposals to government customers or prime contractors for propulsion development or technology programs.



5% - Provide inputs to written and verbal status reports to Engineering lead, Aerojet/Rocketdyne Management, and provide input and leadership at product team meetings.

Education:
-Requires a Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related discipline, and five (5) or more years of directly related experience.

-CAD knowledge is desirable.

-Working knowledge of Microsoft Office software is required.


Skills:
Required
PROJECT ENGINEERAEROSPACEACTIVE SECRET CLEARANCE

State/Province: California
City/Town: Canoga Park

Start Date: 05/14/2018 Hours Per Week: 40.00
Est. End Date: 12/21/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A8120386
Job Location: Canoga Park, CA
Rate: 50-66/hr DOE
Per Diem: no
Duration: 6 months
Input Date: 06/20/2018
Last Updated: 06/25/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Engineer 3 / Ability to obtain Secret Clearance CA

Description:
1642
Logistics Engineer 3 (Job Number: 18006742)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: May 28, 2018

Target End Date: May 24, 2019

Pay Rate: $42/hr

Work Schedule: 9/80

Location: Redondo Beach, Ca

Duration of Assignment: 1 year

Clearance: Ability to obtain Secret


Responsible for the technical coordination, planning, execution, and management of NGAS-derived support and deliverables within the broader F-35 Maintenance, Repair, Overhaul and Upgrade (MRO&U) competency. Position involves significant collaboration with engineering, supply, operations, program office and customer stakeholders to conceptualize, develop, mature and brief/solicit government approvals of comprehensive retrofit projects. Develops corresponding Basis of Estimate documentation conveying technical scope and rationale for NGAS deliverables and labor projections. Support and review modification engineering, Time Compliance Technical Directive (TCTD) manuscripts and provide virtual support for associated verification events. Candidate may be required to routinely work extended hours and weekends to meet program objectives. Lead modification tools and tooling development activities and coordinate for related inspections, fielding and engineering support. Must possess excellent interpersonal, written and oral communication skills and experienced leveraging Microsoft Office suite applications. Position involves a wide range of influence and requires a resourceful, independent self-starter able to analyze and solve complex technical and logistical challenges involving solicitations of and commitments from various stakeholders.


Basic Qualifications:

• Bachelor of Science degree from an accredited college in Aerospace Engineering, Mechanical Engineering, or related field of study is required
• 5 years of experience related to aircraft modification, maintenance and related logistical operations.
• Prior aircraft tooling development, verification and utilization experience.
• Applicant must be proficient in Windows, MS Word, Excel, Access and Power Point
• Verbal, writing, presentation, and leadership skills are essential.
• Ability to obtain a Secret clearance
• US Citizenship

Preferred Qualifications

• Understanding of Project Management fundamentals
• Familiarity with F-35 air vehicles a plus
• Current Active Secret Clearance
 
Job Number: MB-1642
Job Location: Redondo Beach, CA
Rate: 42/hr max
Per Diem: no
Duration: 1 year
Input Date: 06/12/2018
Last Updated: 07/09/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MECHANICAL DESIGN ENGINEER

Description:
Johnson Service Group (JSG) is searching for a Mechanical Design Engineer, responsible for the design of actuation systems for commercial aircraft applications.

Summary of Job Scope:

4-6+ years of related mechanical design engineering experience, in an aerospace/aircraft environment.

UGNX is required and SolidWORKS is a plus.
Windchill (PLM) experience is Required.

Will create detailed designs using 2D and 3D drafting including Feedback Dimensioning and tolerancing.

Knowledge of hydraulic and /or pneumatic systems or similar aircraft systems/components.

Involved in all engineering aspects of several complex and detailed projects, which may include project management as well as engineering tasks.

Solves in-depth engineering problems and communicates solutions to other engineers, sales development and management.

Promotes and implements process improvements.
Independently troubleshoots/analyzes system problems using complex computer modeling and simulations.

May write and execute complex component and system testing.
Will interact with engineers, technicians, drafters, and/or designers on a project level basis.

Evaluate components of a complex systems and provide solutions.
Understanding of component functions and testing requirements, as well as the relationship to system interaction and validation.

Strong understanding of manufacturing processes, drawings and geometric tolerances as well as shop standards and procedures and how they impact design.
Hands-on Finite Element Analysis (FEA) experience is a plus, but not required.

Education:

Bachelor’s Degree in Mechanical Engineering or a similar technical discipline

Duration: 18 - 24 month contract position

Compensation: Excellent compensation

Location: Duarte, CA
 
Job Number: 365645
Job Location: DUARTE, CA.
Per Diem: If qualified
Overtime: Possible
Duration: 18+ Months
Start Date: ASAP
Input Date: 05/15/2018
Last Updated: 05/21/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MECHANICAL DESIGN ENGINEER

Description:
Johnson Service Group is looking for a Mechanical Design Engineer.

Candidate should be a mechanical design engineer with aerospace background or good mechanism experience.
Solidworks experience is required.
Candidate should understand technical requirements, able to develop design concepts that could meet the requirements, use basic calculations or design practices to verify that they are met, model/document the design fully, and assist in the integration and/or testing of the design.
 
Job Number: 365812
Job Location: Pasadena, CA.
Per Diem: If qualified
Overtime: Possible
Duration: 12+months
Start Date: ASAP
Input Date: 05/09/2018
Last Updated: 05/21/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
The primary task of this person will be to review manufacturing non-conformances and establish appropriate dispositions for these parts and assemblies. Competency in first order design and analysis principles is a must. Ability to utilize CATIA V5 is desired. Experience with various composite material systems is desired.
Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
Working knowledge and experience integrating various mechanical systems into a composite aircraft.
Familiarity with composite fabrication processes
Review and provide engineering technical disposition of non-conformance notifications related to metallic and composite parts/assemblies
Skilled in “equivalent strength” principles
Participation in product Corrective Action Board (CAR) reviews

Requirements
B.S. degree in Mechanical, Aerospace, or similar engineering discipline is required
At least 5 years of relevant industry experience
Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
Experience with manufacturing based ERP systems a plus
Strong team player and ability to work independently with excellent organizational and problem-solving skills
Composite and metal design experience preferred
Understanding of MRB requirements & procedures
Extensive working knowledge of engineering drawings / requirements
NDT/Visual non-conformance disposition expertise
Experience with control & segregation requirements for non-conforming material
Familiarization with records accuracy & completeness (including data codes)
Ability to facilitate inadequate cause & corrective action resolutions
Familiarization with rework vs accept disposition risk assessments
Familiarization with final dispositions & re-submit codes
Experience should include creation of engineering dispositions for non-conformances for pressurized and non
pressurized metallic and non-metallic structures (fuselage, wing, empennage)
Experience should be in a production and/or schedule-driven environment
Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
Strong written/verbal communication and interpersonal skills
Typically a 9-10 hour work day, with some scheduled weekend support required

ITAR Requirements
To conform to U.S. Government export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15) or eligible to obtain the required authorizations from the U.S. Department of State.

The Structures Company is an AA/EOE.
 
Job Number: 191
Job Location: Mojave, CA
Rate: $65.00
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 07/13/2018
Last Updated: 09/10/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills
• Bachelor’s Degree in aerospace or mechanical engineering.
• Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer
• Experience should include creation of engineering dispositions for non-conformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, and empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as Catia V5, SmarTeam, Word, Excel)

Experience/Education
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.
 
Job Number: 24-240
Job Location: Long Beach, CA
Rate: DOE but competitve
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 05/11/2018
Last Updated: 05/17/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Maintenance Mechanic - Level 1 - FL

Description:
Chipton-Ross is seeking a Maintenance Mechanic for an opening in Pinellas Park, FL.

RESPONSIBILITIES
Typical minimums: High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data.
Competently uses computers and other systems to access, maintain and manipulate data.
Interpersonal skills and the ability to interface with all levels, to work in teams or independently and communicate effectively with all co-workers or supervisory staff.
" Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
" Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
" Light janitorial duties expected.
" May perform routine inspections to determine repair and maintenance work necessary.

REQUIREMENTS
" Basic equipment/machines repair (NOT PARTS) and troubleshooting skills, for both electrical and hydraulic systems.
" Carpentry and plumbing experience required.
" Strong troubleshooting/diagnostic skills; proficient with multi-meter
" Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
" Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
" Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
" Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
" Commercial plumbing repairs
" Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)

SHIFT
1st Shift: 6:30am to 5:00pm
4/10 work schedule
 
Job Number: 166611
Job Location: Pinellas Park, FL
Rate: $16 to $22.00 DOE
Duration: 12 Months
Input Date: 03/11/2018
Last Updated: 01/22/2019
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
• Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Solumina, SAP, CATIA V5, SmarTeam, Fabrication Process Methods.

Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed)
• Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-255
Job Location: Savannah, GA
Rate: $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 05/15/2018
Last Updated: 08/13/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer
Location: SE Bothell, WA
Duration: 1 year


Description:
This work will include supporting the development of fiber laser systems that are field deployable in military and commercial environments. The Manufacturing Engineer will work in between both development and production. The engineer will perform functions to design, develop, and optimize fabrication processes for fiber lasers. The engineer will evaluate potential new fabrication and production equipment for effectiveness and relevance. The engineer will participate in transition of new designs from development into production, activities will include process development, first article build support, review of assembly and test defect data, answer Corrective Action Requests, etc. to assure technical objectives are met. The engineer will also drive continuous process improvement through utilization of Lean/Six Sigma techniques, current Greenbelt or Blackbelt certification preferred.

Skill/Experience/Education
Mandatory:
5 to 7 years of demonstrated work experience in both a development and production environment of fiber laser systems that are field deployable. Strong organization skills are required. Strong verbal & written communications skills are required. Attention to detail, good interpersonal skills, ability to multitask, good organizational skills, computer literacy, and a demonstrated ability to work well in a team environment. Knowledge of electro-mechanical assembly, industrial processes, technical writing, and teaming. Candidate should have a good understanding and demonstrated application of technical and problem solving skills in the area of manufacturing and production. Candidate should have the ability to clearly communicate instructions, verbally and written, providing clear direction.

Desired:
Experience in laser / optical manufacturing processes Experience in fiber optic fusion splicing


Skill Matrix
Skill Name Description Level (1-5, 5 being the highest) Years Mandatory(Yes/No)
1 2 3 4 5
Manufacturing Engineering Production understanding 4 4-5 Years Yes

Please contact me at (804)915-9602 or rchaudhary@iconma.com
 
Job Number: 18-07806
Job Location: Bothell, WA
Rate: Open
Per Diem: YES
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 05/08/2018
Last Updated: 05/15/2018
Firm Name: ICONMA LLC
Attention: Rohit
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
experience in developing and implementing repair processes specific to aero- and aero-derivative gas turbine engine components.

Duties Include

Under the direction of the RD Engineering Manager, identify and execute the implementation of new and derivative repairs for a wide variety of engine components.
Provide support and consultation services with regard to new technologies and the development of new repairs and processes.
Participate in all phases of product/process development. Provide analytical support, evaluation and calculations for new repair development studies and subsequent initiation including cost benefit analysis, evaluating end-user performance and providing cost and schedule estimates for proposed work packages.
Prepare engineering reports and data packages for repair development substantiation and approval.
Demonstrate the technical expertise and experience necessary to make airworthiness engineering decisions regarding major repair design activities, in accordance with the company design approval organization manual.
Compile and analyze data on repairs; identifies root causes and rectify; develop measures of performance on all repair processes. Use these data to assist with continuous improvement of component repair methods and capabilities.
Support the production development group activity in modifying and refining existing repair schemes to eliminate and/or reduce the number of rejects occurring.
Provide technical training support or mentoring for repair development and metallurgical analysis.
Direct acquisition of equipment as required to meet repair development objectives.
Position Requirements

Minimum 5 years’ experience in a related engineering discipline. Specific turbine engine component repair development experience is mandatory.
4 year degree in materials science, mechanical engineering or metallurgy
Thorough knowledge of gas turbine engine theory and performance
Fully conversant with testing methods and experiment design to meet airworthiness compliance program requirements.
Strong planning, organizational, analytical, leadership, interpersonal, decision making, oral and written communication skills.
Strong project management skills.
Thorough knowledge of aerospace materials and processes.
Ability to read, understand and interpret blueprints.
Working knowledge of PC's
Working knowledge of precision measuring instruments.
Experience working in jurisdictions governed by a regulatory body or with an association that is governed by local legal requirements, registration is required.
Experience in an aerospace engineering environment.
Must be legally able to work in the United States.
 
Job Number: 18-817
Job Location: Midwest and Texas
Duration: 6 months +
Input Date: 04/25/2018
Last Updated: 05/10/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Manufacturing Engineer performs technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform producibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/02/2018
Last Updated: 07/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
• Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Solumina, SAP, CATIA V5, SmarTeam, Fabrication Process Methods.

Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed)
• Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-234
Job Location: Savannah, GA
Rate: $50
Per Diem: Yes
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 03/13/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer performs technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.


Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/13/2018
Last Updated: 05/18/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Manufacturing Engineer 3
(U.S. Citizenship Required*)
Berkeley, MO
2018-5990

Responsibilities:
• Develop and implement production and tooling methodologies.
• Participate on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines.
• Develop, identify, and implement conceptual designs and maintain the program architecture for build.
• Lead and implement manufacturing plans.
• Conduct producibility & variation analyses to ensure that manufacturing process capability matches requirements.
• Assist providing producibility information for inclusion in project plans and help document producibility best practices.
• Analyze design/build concepts to evaluate producible design/build definitions.
• Resolve technical problems of significant impact to performance, cost or schedule.
• Coordinate & implement new engineering principles, theories, advanced technologies and concepts.
• Validate & ensure production readiness of solutions to complex problems.
• Implement lean principles and technologies.
• Drive part demand, procurement orders, and issue fabrication orders (with internal & external suppliers).
• Effort includes mechanical and electrical manufacturing.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5990
Job Location: Berkeley, MO
Rate: Based on experience
Duration: 6 Months
Input Date: 05/14/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Theo Hawthorne
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term Contract
Per Diem Split: Yes (if eligible)
Overtime: Possible

****MUST be a U.S. Citizen or Permanent Resident****


PREFERRED: Solumina, SAP, CATIA V5, SmarTeam, Fabrication Process Methods

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 9169
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/11/2018
Last Updated: 07/30/2018
Firm Name: INCONEN CORPORATION
Attention: Sean O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term contract
Shift: 1st Shift

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Experience with Catia V5, SAP, and Solumina highly preferred. Must be able to work with production and engineering personnel to resolve issues. Must be able to generate build plans and manufacturing bill of materials from 3D data.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7989
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/25/2018
Last Updated: 07/10/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term Contract
Per Diem Split: Yes (if eligible)
Overtime: Possible

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Solumina, SAP, Smarteam, Catia V5

Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 8905
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 04/10/2018
Last Updated: 06/04/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term Contract


Unique Skills:
Solumina and SAP experience preferred

Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 8642
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/11/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Sean O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
Experience writing manufacturing work instructions and creating bill of materials for aircraft manufacturing.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7979
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 03/07/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II/III

Description:
Location: Canoga Park, CA
Rate: Level II = $35.00 - $39.00/HR
Level III = $40.00 - $48.00/HR
Duration: 6 month contract
Shift: Regular 40 hour week. OT Possible
Per Diem Split: Yes (if eligible)


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **


Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required Skills:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- BS degree in Manufacturing /Industrial Technology or Engineering required
 
Job Number: 8010
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/15/2018
Last Updated: 01/02/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II/III URGENT CA

Description:
160456/7347633
Job Title: Manufacturing Engineer II/III
48/hr max

Number of Positions: 10



Duties:


** Looking for go-getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **
Also, Delmia, Maestro and Windchill are preferred, not required.




-There are two (2) Level II openings and two (2) Level III openings.



The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required Skills:

-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.

-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.



Desired Skills:

-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.

-Project management skills and MS Office applications ( Word, Excel).

-Experience with Maestro, Delmia and Windchill are preferred, not required.

-Aerospace experience preferred but not required.



Keywords:

-Manufacturing Engineer

-Propulsion components

Education:
BS degree in Manufacturing /Industrial Technology or Engineering required

Skills:
Required

MANUFACTURING ENGINEER AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 10/23/2017 Hours Per Week: 40.00
Est. End Date: 04/22/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A7347633
Job Location: Canoga Park, CA
Rate: 48/hr max
Per Diem: no
Duration: 6 month contract
Input Date: 08/28/2018
Last Updated: 09/11/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
Location: Brunswick, GA
Rate: $62.00/HR
Duration: Long Term
Shift: 1st Shift

**MUST be a U.S. Citizen or Permanent Resident**

Unique Skills:
Background in BOM and drawing analysis as well as knowledge of CATIA and Corridor preferred.

Other Requirements: 1. Proven knowledge and understanding of Lean and/or Six Sigma principles and processes. 2. Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc. 5. Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable. 6. Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 4 years manufacturing engineering, planning, or related technical experience.

Position Purpose:
Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 19. Author DRDI/DMT rework instructions to support effective corrective actions. 20. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 21. Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 7. Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed. 8. Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc. 9. Keep current on state-of-the-art manufacturing developments. 10. Incorporate Lean Manufacturing Methodology into existing and future processes. 11. Develop business case and present to management for process improvement approval. 12. Assume the duties of the ME Group Head in his/her absence. 13. Assign and review work of subordinate personnel. 14. Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems. 15. Lead/coordinate the implementation of projects between multiple orgs. 16. Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader. 17. Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions: 1. Ensure quality policies are being practiced; make recommendations to improve quality. Perform other duties as assigned.
 
Job Number: 8938
Job Location: Brunswick, GA
Rate: $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/11/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Sean O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer – Level 3

Description:
Location: Bothell, WA
Rate: $40.00 - $45.00/HR
Duration: 1 year contract
Shift: 1st Shift

**MUST be a U.S. Citizen**


Job Description:
- This work will include supporting the development of fiber laser systems that are field deployable in military and commercial environments.
- The Manufacturing Engineer will work in between both development and production.
- The engineer will perform functions to design, develop, and optimize fabrication processes for fiber lasers.
- The engineer will evaluate potential new fabrication and production equipment for effectiveness and relevance.
- The engineer will participate in transition of new designs from development into production, activities will include process development, first article build support, review of assembly and test defect data, answer Corrective Action Requests, etc. to assure technical objectives are met. - The engineer will also drive continuous process improvement through utilization of Lean/Six Sigma techniques, current Greenbelt or Blackbelt certification preferred.


Skill/Experience/Education
Mandatory:
- 5 to 7 years of demonstrated work experience in both a development and production environment of fiber laser systems that are field deployable.
- Strong organization skills are required.
- Strong verbal & written communications skills are required.
- Attention to detail, good interpersonal skills, ability to multitask, good organizational skills, computer literacy, and a demonstrated ability to work well in a team environment.
- Knowledge of electro-mechanical assembly, industrial processes, technical writing, and teaming.
- Candidate should have a good understanding and demonstrated application of technical and problem solving skills in the area of manufacturing and production.
- Candidate should have the ability to clearly communicate instructions, verbally and written, providing clear direction.


Desired:
- Experience in laser / optical manufacturing processes
- Experience in fiber optic fusion splicing
 
Job Number: 9106
Job Location: Bothell, WA
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 05/16/2018
Last Updated: 05/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Research Engineer

Description:
Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.


Seeking an electronic/photonic/manufacturing device engineer or research scientist to provide support to a program focusing on printing techniques for electronic and photonic device fabrication. The selected candidate will use additive manufacturing and conventional cleanroom processing techniques to fabricate and design electronic and RF components for a variety of applications such as basic electronic controls, RF antennas, photonics, etc. Additive manufacturing refers to inkjet printing, aerosol jet printing, extrusion printing (such as Nscrypt), and 3D printing such as polyjet or thermoplastics; conventional cleanroom processing techniques refers to photolithography for electronic device fabrication and its associated characterization. Expertise is not expected in all of these areas, but some familiarity is needed. The selected candidate will complete research tasks with minimum oversight and deliver completed prototypes, produce reports, and process documentation. Duties will include designing experiments to characterize printer performance, identifying appropriate materials to deposit either purchased commercially or manufactured in-house, and some device design and characterization of manufactured devices. Additional responsibilities will include 1) designing and fabricating photonic and electronic devices, 2) becoming an expert at running and maintaining both the aerosol jet and ink jet printers, 3) specifying additional materials and equipment to purchase to support research, 4) contributing to reports and presentations of technical progress, and 5) authoring scientific papers and attending conferences. Education/Experience: The selected candidate must have a PhD in electrical engineering, materials engineering, mechanical engineering, physics, optics or related field with three years of experience. Knowledge, Skills and Abilities: This position will require basic knowledge of CAD or AutoCAD and software design. Familiarity with materials and device characterization is required: electrical, RF, optical, mechanical. Familiarity with RF modeling software (such as Comsol) is desired. Applicant selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.
 
Job Number: KM0011
Job Location: Dayton, OH
Input Date: 04/27/2018
Last Updated: 05/18/2018
Firm Name: MIDCOM CORPORATION
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
Model and calculate mass properties data to support all phases of project development. Translate customer requirements into mass models for development of mission profiles. Analyze mission configurations using 2D drawings and 3D CAD. Generate mass properties distributions for modifications and input to structural loads models. Lead weight reduction tasks.
Articulate mass properties requirements, risks, opportunities, and status at formal design reviews.
Perform weight and balance measurements of components and final products. Coordinate mass properties requirements with multi-disciplinary teams including maintenance, production, logistics support, flight test, flight operations and other disciplines.

Familiarity with SAWE and American Institute for Aeronautics and Astronautics (AIAA) Recommended Practices and Standards, Automated Weight and Balance System (AWBS) and FAA airworthiness regulations.
Knowledge and experience in aircraft operations, familiarity with Microsoft Office, and 3D CAD/CAM tools (CATIA preferred)
Familiarity with aerospace system design and integration, manufacture, and maintainability, including familiarity with best practices in mechanical, electrical, and systems design.
Requires a BS in Related Field.

Update Mass Properties Databases.
-Assist and perform mass property trade studies as necessary.
-Suggest and track weight improvement ideas.
-Assist in Mass Properties measurements from a detail up to a vehicle level.
-Other Mass Properties tasks as needed.

The position will be working detail design on a new composite vehicle. They will primarily be reviewing drawings and incorporating them into our database in support of weight tracking, loads, stress and flutter; working trade studies to support configuration decisions; and tracking and suggesting weight savings ideas to support the program requirements.

The Structures Company is an AA/EOE.
 
Job Number: 104
Job Location: Mojave, CA
Rate: $75/hr. DOE
Per Diem: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 08/01/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
PRIMARY RESPONSIBILITIES INCLUDE:
Provide mass properties engineering in accordance with industry standards and Society of Allied Weight Engineers (SAWE) best practices. Analyze mass properties impacts of internal and external modifications, and impacts to systems and subsystems. Analyze and account for changes in mass properties throughout program lifecycle.
Model and calculate mass properties data to support all phases of project development. Translate customer requirements into mass models for development of mission profiles. Analyze mission configurations using 2D drawings and 3D CAD. Generate mass properties distributions for modifications and integrate with OEM data for input to structural loads models. Manage subcontractor efforts related to mass properties including vendor weight control. Lead weight reduction tasks.
Articulate mass properties requirements, risks, opportunities, and status at formal design reviews to both internal and external customers.
Generate FAA and DoD mass properties documentation meeting requirements of airworthiness certification including weight and balance manuals, supplements, and equipment lists.
Perform weight and balance measurements of components and final products. Coordinate mass properties requirements with multi-disciplinary teams including maintenance, production, logistics support, flight test, flight operations and other disciplines.

EDUCATION, EXPERIENCE AND SKILLS REQUIRED:
Requires a BS in Related Field.

Sr. Mass Properties Engineer with 10+ Years of experience
Familiarity with SAWE and American Institute for Aeronautics and Astronautics (AIAA) Recommended Practices and Standards, Automated Weight and Balance System (AWBS) and FAA airworthiness regulations.
Knowledge and experience in aircraft operations, familiarity with Microsoft Office, and 3D CAD/CAM tools (Solidworks preferred)
Familiarity with aerospace system design and integration, manufacture, and maintainability, including familiarity with best practices in mechanical, electrical, and systems design.
Must be a problem solver capable of working alone or with a technical team in a fast paced environment.

Note: Ability to obtain/maintain a security clearance may is required.

The Structures Company is an AA/EOE.
 
Job Number: 196
Job Location: CO
Rate: $55-$63/Hr., DOE
Per Diem: Yes
Overtime: Yes
Duration: 6+ Months
Start Date: May 2018
Input Date: 05/24/2018
Last Updated: 08/01/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Mechanic Technician II

Description:
PDS Tech is seeking several mechanics for positions in Kansas City.
Must have steel toed shoes/boots; all assignments are one year in length
TWO - 1ST Shift KCR Remanufacturing Techs - Kansas City MO
 
 
 
Work may involve used mechanical parts. Aprons & Coveralls are available to contractors; must have steel toed shoes
  
 Operation of Overhead Cranes is involved in this job
Essential Functions / Responsibilities:*Perform disassembly, clean, requalification, rework and assembly operations on Traction Motor Combo component utilizing manual equipment and automated equipment in accordance with manufacturing and quality procedures. Inspect work completed on components to internal inspection criteria for compliance to quality or engineering requirements. Responsible to perform work in a safe manor in support of lean manufacturing principals such as but not limited to 5s or single piece flow to required takt time. In some cases may have to perform special process such as welding or non-destructive testing which will require special process training or certification. Operation of overhead cranes
Basic Qualifications / Requirements:*• Must have high school diploma or GED at a minimum
Knowledge of EHS procedures and policies
• Knowledge of safe use manual equipment and hand tools for assigned product lines.
• Working knowledge of use of inspection measurement equipment
• Understanding of all manufacturing and quality procedures associating assigned product line in a lean manufacturing environment
• Maintain acceptable defect rates
• Successful completion of training requirements
• Where applicable, trained in special processes such as but not limited to welding or non-destructive testing
Desired Qualifications:*• Demonstrate ability to safely complete job tasks utilizing manual or automated equipment as well as use of gages needed for inspection or testing as required
• Demonstrate ability to document and record inspection results per in-house procedures
• Successful completion of quality audit to internal procedures on assigned product line and/or use of equipment

 

For consideration to this position, please contact Earl Sawyer at esawyer@pdstech.com or 843-277-6616.


 
Job Number: 1710067688
Job Location: KS City, MO
Duration: 12 months
Input Date: 05/03/2017
Last Updated: 01/22/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000012YKOAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical 2D and 3D Engineering Checker

Description:
Mechanical 2D and 3D Engineering Checker
Savannah, GA
Rate: $55-$63

Unique Skills:

Required Check 2D engineering data and 3D models for conformance to Company requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of GAC parts list & PdocM, a plus. Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Other duties as assigned.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7821
Job Location: Savannah, GA
Rate: $55-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Houston, TX
Duration: 1 year contract
Pay Rate: $48.25/HR
Shift: 1st Shift
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST HAVE A STRONG PROFICIENCY IN USING 'PRO-E\CREO'****
****MUST HAVE A DETAILED KNOWLEDGE OF MANUFACTURING AND ASSEMBLY PROCEDURES****

Job Description:
- ***CRITICAL: CANDIDATE MUST HAVE A STRONG PROFICIENCY IN USING 'PRO-E\CREO'***
- Candidate must also have the ability to produce and check drawings conforming to ASME Y14.5 and to support, and verify design with standard hand calculations for form, fit, function, and structural strength.
- ***CRITICAL: DETAILED KNOWLEDGE OF MANUFACTURING AND ASSEMBLY PROCEDURES ARE A MUST***
- Knowledge of the standard design process is a must.
- This engineer should be able to prepare reports of results of analysis and experimentation, and the ability to present design content at various design reviews must be evident.

Requirements/Education:
- Bachelor's Degree
- 5 - 10 years of experience
- Strong analytical and problem solving skills are essential;
- Pro-Engineer/CREO knowledge for model, layout, and drawing creation;
- Finite element analysis tools (ex. ANSYS, Pro-Mechanica, NASTRAN/PATRAN) and able to perform linear stress analysis based on the experience, vibe and shock, fatigue;
- Hands on and Service mentality Design for Manufacturability.
- Good verbal and written communication skills.
- Excellent team skills.
- Ability to prioritize work independently with little direction while staying on task.
 
Job Number: 9134
Job Location: Houston, TX
Rate: $48.25/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 05/21/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer SECRET CLEARANCE needed UTAH

Description:
Active Secret DoD Clearance within 5 ½ years of last investigation
Bachelor’s Degree in Aerospace, Mechanical or Manufacturing
Experience in working with aerospace specifications and drawings
Experience in the use of ANY CAD systems (NX -preferred)
Experience designing / supporting an aerospace manufacturing process with the necessary materials, tooling, and equipment
Knowledge of root cause / corrective action processes and techniques
Functional knowledge of Process Failure Modes and Effects Analysis (PFMEA)
Functional knowledge of production control systems (SAP/Visual Mfg/etc)
Experience authoring, modifying and auditing procedures
Experience estimating, planning, and streamlining manufacturing processes
Experience using SPC to monitor and improve processes
Experience addressing manufacturing discrepancies through a formal MRB process
Good organizational skills and ability to work with minimal direction
Excellent computer skills. Skilled in working with Microsoft Office applications
Strong problem solving skills
Excellent verbal and written communication skills
Preferred Skills and Experience:
Composites hand layup, fiber placement, bonding, cure, assembly, and machining experience
 
Job Number: 2963
Job Location: promontory, UT
Rate: 60-100+ / Hr
Per Diem: YES
Overtime: Possible
Duration: 6 - 12 months
Start Date: 2/3 weeks
Input Date: 04/13/2018
Last Updated: 08/21/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
No Clearance Required

Experience in thermal performance and expansion of materials related to the design, manufacture and performance of a vehicle exhaust system

Able to interact with analysts to perform CFD on the system, experience in acoustics is a plus.

Able to interact with designers to integrate system into the hull.

- Develop sub-system/component level requirements and design concepts.

- Design, select, integrate components

- Source select and interface with suppliers

- Perform engineering analysis to evaluate sub-system/component designs.

- Work with design services to create/release detailed models and drawings.
 
Job Number: 42136
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 06/14/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
•Must have a Secret security clearance to start with the ability to obtain a TOP SECRET/SCI (TS/SCI)

•Air Force and/or DOD background a plus.
•Able to develop overall system power, weight, size, and interface requirements.
•Able to perform Mechanical Load and Stress Analysis, Continuity Tests and Operational Tests and to prepare associated plans and reports IAW Air Force standards
•Experience in preparing mechanical drawings using CAD Software and tools
•DoDAF experience desired
•Experience in preparing 3D models of mechanical systems and supervising the production of 2D assembly
•Experience using SolidWorks analysis tools highly desired.
 
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 05/08/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
From the Hiring Manager:

*** Looking for a Mechanical Engineer who has prior hands-on mechanical design experience along with the working knowledge / understanding of the assembly / fabrication process
*** SolidWorks is a must; should have Production / Manufacturing experience working for government customers (Defense, Military, etc). Not someone with all Aerospace experience

Summary:

The Mechanical Engineer will assist in the creation of proposals for technical solutions to government customer solicitations by researching, brainstorming and developing new mechanical design solutions. The projects will require solutions that ensure functionality, quality, reliability, cost and manufacturing capability for a range of specifications. The Mechanical Engineer will create and maintain the project specifications and develop the design and other aspects of the project plan including schedule, resources and costs.

Responsibilities:

> Design and analyses of technical development projects, mechanical systems with multiple moving parts
> Define project specs and project plans
> Work with manufacturing processes / systems and the ability to translate this knowledge into design direction for new designs and existing product improvements;
> Independently create structural analyses of machinery and small scale architectural assemblies
> Work with structural analysis tools, both manual calculations and automated software approaches (Finite Element Analysis (FEAs))
> Work with weldments and/or welded structures
> Exhibit fluency in parts/assemblies and have an understanding of, and experience with, MIL-STD-810 environmental requirements and resulting design issues
> Product validation and durability testing
> Initiate and lead cross functional team meetings and design reviews to complete mechanical design (concept through launch)
> Apply DFM/DFA principles to the mechanical design and creating multiple concepts, thoroughly evaluating each, and presenting them for design reviews by peers.

Requirements:

> Bachelors/Masters in Mechanical Engineering & 5 – 10+ years in mechanical project engineering experience
> Proficient in Solid Works and ASME Y14.100
> Experience in Research & Development for government customers (preferred)
 
Job Number: 025_2018
Job Location: Elkridge, MD
Rate: DOE
Per Diem: N/A
Overtime: Possible
Duration: Perm Hire
Start Date: ASAP
Input Date: 05/04/2018
Last Updated: 10/16/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
7 plus years' experience, CAD or Solid Works training and experience required, Engineering Change Process experience required, FDA regulated industry is a plus, 6 sigma or Lean training is a plus.
 
Job Number: 18-07324
Job Location: Irving, TX
Rate: Hourly rate
Per Diem: Yes
Overtime: Yes
Duration: 20 Months
Start Date: ASAP
Input Date: 05/03/2018
Last Updated: 05/15/2018
Firm Name: ICONMA LLC
Attention: Pratap Singh
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
  • BS in Mechanical Engineering, MS preferred.
  • Minimum of nine years of experience in developing precision sensor
  • Experience in system level hardware design & development with an emphasis in mechanical and structural analysis and test for space-based environments. 
  • Experience using both finite element modelling (FEM) and CAD tools, such as FEMAP/NASTRAN and Autodesk Inventor.
  • Opto-Mechanical hardware design experience utilizing structured engineering process from requirement definition through design, development, and testing.
  • Expert mechanical analysis background including tolerancing, thermal, structural (modal, stress, deflection).
  • Structure and sensor level testing experience a plus
  • Space mechanism experience a plus
     
  • Job Number: 41-002
    Job Location: Wilmington, MA
    Rate: DOE, but very competitve
    Per Diem: Yes
    Overtime: No
    Duration: 1 Year plus
    Start Date: ASAP
    Input Date: 04/26/2018
    Last Updated: 06/22/2018
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer

    Description:
    Mechanical Engineer reports to the Engineering Manager and a member of a given integrated product team, the Mechanical Engineer will participate in the development of new aircraft system designs, modifications to existing designs, and new customer introductions.


    • Mechanical Engineer is responsible for the design assigned including manufacturability, assembly, and meeting cost and weight targets
    • Responsible for Bills of Material,
    • Responsible for following up/communicating with purchasing, prototyping, testing, and manufacturing to ensure high quality of design.
    • Detail design of mechanical products
    • Design for manufacturability and assembly
    • The design and detail modeling of a variety of suite components in order to meet the program requirements
    • Production detail design and support development
    • Delivery of detail design to BOM
    • Ability to make trade-offs to yield optimum results, achieving cost, weight, functionality and reliability goals
    • Managing and meeting cost and weight targets
    • High attention to details in the design
    • Communicating effectively and professionally with customers and suppliers
    • Participating in Design Reviews throughout each phase of the New Product Introduction process
    • The selection and application of materials and processes appropriate to each design element
    • Ensuring the successful integration of each design element with the product as a whole
    • Following and contributing to the development of the Best Practice guidelines as laid out in Quality documentation
    • Checking engineering packages
    • Generating and/or revising specifications
    • Participating in the validation of the product (using such methods as prototyping, test, DFMEA)
    • Detail design of work packages
    • Coordinate and consolidate mechanical design from various product sites
    • Good communication and leadership skills
    • Travel up to 10% both domestically and internationally
    • Any other reasonable engineering related duties


    • Bachelor's degree in Engineering from a four-year college or university; and three-to-five years related experience and/or training; or equivalent combination of education and experience.
    • MS Word, Excel and Outlook
    • NX 9 (formally Unigraphics) experience
    • Siemens TeamCenter9
    • Master’s degree in Mechanical Engineering or related field
    • Aircraft interior architecture
    • Cabin interior experience
    • Effective application of tolerances and GD&T
    • Awareness of the certification framework within which the work is undertaken
     
    Job Location: Seattle, WA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 03/14/2018
    Last Updated: 06/22/2018
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer - Active Secret Clearance

    Description:
    Major purpose:

    Mechanical design, integration, test and production support of simulation equipment.

    Responsibilities include development of 3D models, detailed drawings and interfacing with manufacturing.



    Additional Job Requirements:

    Must have an existing, active Secret Security Clearance.

    •BS in Mechanical Engineering or equivalent experience in an engineering discipline

    •Prefer 4+ years of directly related experience

    •Experience developing 3D models and detailed drawings

    •Ability to develop innovative solutions

    •Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers



    Desired Qualifications

    •Experience using SolidWorks and AutoCAD

    •Finite Element Analysis application experience

    •Familiarity with aircraft cockpit systems

    •Simulation equipment experience

     
    Job Number: 18-08279
    Job Location: Broken Arrow, OK
    Rate: 34.0USD/Hour
    Per Diem: --
    Overtime: --
    Duration: 2018-09-19 00:00:00.0
    Start Date: 2018-03-19 00:00:00.0
    Input Date: 02/28/2018
    Last Updated: 06/01/2018
    Firm Name: NESCO RESOURCE
    Attention: Anthony Kees
    Address: 101 COMMERCE ST STE 3001
    City, State: LAKE MARY, FL 32746
    Phone: 407/710-8000
    Fax Phone: 407/710-8001
    Website: www.nescoresource.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer II

    Description:
    Location: Savannah, GA
    Rate: $50.00/HR
    Duration: Long Term
    Shift: 1st Shift
    Per Diem Split: Yes (if eligible)
    Overtime: Possible

    **MUST be a U.S. Citizen or Permanent Resident**

    Unique Skills:
    **This candidate will be writing and submitting E.O. (Engineering Orders), changing and developing models, etc. Needs to have experience with design engineer, more so than manufacturing.**
    - Previous employment with Gulfstream a plus.
    - Bachelor's degree in engineering, preferably Mechanical or Aerospace Engineering
    - Familiarity with Spares and Replacements approval processes is a plus
    - Experience with Autocad, CatiaV5, and Smarteam is a plus
    - Familiarity with manufacturing processes and environment
    - Experience with problem solving and root-cause analysis
    - Able to communicate clearly and effectively with all engineering groups

    Education and Experience Requirements:
    Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelors degree. Experience credit will be considered for related advance degrees limited to 2 years for Masters Degree and 4 years for PhD in fields applicable to this job position.

    Position Purpose:
    Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

    Principal Duties and Responsibilities:
    Essential Functions: 1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

    Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements 2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise 3. Performs other duties as assigned

    Other Requirements: 1. The level of technical skills and abilities appropriate for this grade will be established by each discipline 2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures 3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources 4. Ability to convey technical concepts in both written and verbal formats 5. Contacts are primarily within the organization, with occasional customer contacts on routine issues 6. Works under general supervision for routine tasks of minor complexity 7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
     
    Job Number: 8980
    Job Location: Savannah, GA
    Rate: $50.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 05/02/2018
    Last Updated: 05/31/2018
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer II

    Description:
    Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of aircraft.

    Unique Skills:
    • Familiarity with Spares and Replacements approval processes is a plus –
    • writing and submitting E.O.(Engineering Orders), changing and developing models
    • Familiarity with manufacturing processes and environment
    • Experience with problem solving and root-cause analysis
    • Able to communicate clearly and effectively with all engineering groups
    • Needs to have experience with design engineer
    • Experience with Autocad, CatiaV5, and Smarteam is a plus


    Education and Experience Requirements:
    • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 18 months related engineering experience with Bachelors degree.
    • Experience credit will be considered for related advance degrees limited to 2 years for Masters Degree and 4 years for PhD in fields applicable to this job position

    Principle Duties and Responsibilities:
    • This candidate will be writing and submitting E.O. (Engineering Orders), changing and developing models, etc.
    • Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.
    • Solves typical engineering problems within assigned discipline
    • Provides technical assistance to engineering staff and contributes to completion of project milestones
    • Responsible for a complex engineering assignment, or a full project of lesser complexity
    • Follows established schedules while developing plans for engineering assignments
    • Obtains appropriate level of supervisor approvals for work accuracy and adequacy
    • Proficiently applies company/organization policies and procedures
     
    Job Number: 24-245
    Job Location: Savannah, GA
    Rate: 50
    Per Diem: Yes
    Overtime: Yes
    Duration: 1 Year Plus
    Start Date: ASAP
    Input Date: 04/25/2018
    Last Updated: 06/15/2018
    Firm Name: PRECISION PERSONNEL INC
    Attention: Jeff York
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer III

    Description:
    Mechanical Engineer III (Senior Engineer) needed for a contract opportunity with Yoh’s client located in Gloucester, MA

    The Big Picture – Top Skills You Should Possess:
    • MUST HAVE CURRENT PRO/ENGINEER CREO EXPERIENCE TO APPLY.
    • BSME or equivalent with a minimum of 7 years related experience.
    • Experience in 3D Computer-Aided Design using Pro/Engineer Creo, PDM Link
    • Finite Element Modeling/Analysis tools (ANSYS, Auto Desk, Pro/Mechanica, MathCad, etc.)
    • Strong theoretical background in mechanical engineering disciplines – structural, heat transfer, mechanism design, fluid systems, and system-level integration
    • Professional or laboratory “Hands-on” experience in a product manufacturing environment
    • Knowledge of test and verification techniques; including data analysis
    • Ability to work with limited supervision and work wit