Job Search Results

872 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/01/21 Sunday 10:49AM Pacific Time by ContractJobHunter. )

Listings 1 - 872

Go To My Job Tracker

Expand all descriptions

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2128 - STRESS ENGINEER - resume - cv. word doc only

Description:
Preliminary and detailed sizings.

Stress analyses to ensure requirements (strength, fatigue, damage tolerance, weights, customers) are met.

Validation of engineering drawings and IPDT support.

Preparation of certification reports and support to entry-into-service.


University mechanical or civil or aerospace engineering degree with a minimum of 5 years relevant experience. Your experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Knowledge of CATIA, finite element modeling and analysis is an asset. General computer skills are essential.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Able to read and write in English and have good communication skills. Being completely bilingual (French and English) is an asset.

Excellent knowledge of aircraft structure and system installation technical requirements ( TCCA, FAA & EASA).

Must have Experience of working with new design and must be able to demonstrate understanding of aircraft component load path and functions.

Must have experience using Patran and Nastran.
 
Job Number: 2128
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2150 - CABINET DESIGNER - Word document only please.

Description:
Act as a specialist in a specific system / monument

Define technical specifications, mechanical/electrical interfaces, design, integrate, certify, test and troubleshoot the above described systems.

Organize and attend design reviews taking into consideration industry regulations, Bombardier Aerospace Design Practices and requirements.

Be in direct contact with suppliers and responsible for the delivery of quality engineering documentation that meets Bombardier Standards.

Research, design and evaluate new technical concepts or emerging technologies. (Trade Shows, Air Shows, technical exhibitions, etc).

Procure parts and supply instructions drawings to employees to build mock-ups/prototype.

Provide definition engineering in relation with new designs%u2026
Support the creation of Interface Control Drawings (ICD)
Report status, identify and mitigate roadblocks
Point of contact on a technical level for designers
Accountable for engineering deliverables and milestones for a group of monuments

Bachelor's degree in Mechanical Engineering with 5 to 8 year experience.

Knowledgeable in 3D design with CATIA V5

Organized and project oriented.

Good communication skills including good English and French are assets

Customer-oriented with innovative problem solving skills and you are organized.

Autonomous, flexible and oriented toward result via your project management skill.

Experience and have lead a small group of designers or equivalent.

Design experience in cabinet assembly design and/or cabinet installation

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc)
 
Job Number: 2150
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 8+ Mths
Start Date: ASAP
Input Date: 06/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2153 - DESIGN/STRESS SPECIALIST - Word document only please.

Description:
Work in a very dynamic integrated product development team (IPDT) involving all technical and production functions.

Put forward optimal solutions for major aircraft structures suitable for latest manufacturing technologies and processes.

Carry out technical feasibility studies, preliminary concepts, volume management for equipment, interfaces requirement, technical review.

Support to IPDT and Suppliers.

Work on Trade Studies, test plans, Installation and detail drawings.

Support experimental testing and entry into service.

University mechanical or civil or aerospace engineering degree.

Minimum of 15 years of relevant experience.

Must have experience in Primary and Secondary Aircraft Structures.

Must have experience with Mechanical systems and systems installations.

Experience in design and creation of MBD and 2D drawings of detail parts (machined parts, sheet metal), assemblies and installation drawings in CATIA V5.

Must have working knowledge of CATIA V5 (minimum 2000H experience).

Ability to understand complex engineering issues.

Basic knowledge required:
- 3D and MBD creation in CATIA V5
- GD&T and technical drawings
- Certification rules
- Manufacturing requirements

Must be computer literate and familiar with commonly used software (MS Office).

Experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Have the knowledge of CATIA, finite element modeling and analysis is an asset.

Have general computer skills - essential.

Are a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Read and write in English and have good communication skills.
Being bilingual (French and English), is an asset.
 
Job Number: 2153
Job Location: Montreal, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 06/19/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2168 - LIAISON ENGINEER - MRB - resume - word doc. only

Description:
Support daily production, completions and delivery operations in our manufacturing and assembly areas;

Design, analyze and disposition repairs for structural non-conformances in a timely manner to restore design integrity in sub-assembly, final line and preflight areas of Bombardier Aerospace.

Rapidly design repairs based on equivalent strength / stiffness of surrounding structure while in a production schedule-driven environment.

Interpret engineering drawings, specs & provide guidance to employees and Methods & Production.

Adhere to Bombardier Aerospace Materiel Review Board (MRB) and Quality Assurance (QA) procedures.

Maintain a current and up-to-date knowledge of developments in aircraft structures in order to recommend innovations to improve the quality, economy, and effectiveness of company products.

Participate in projects that aim to increase productivity, reduce waste and improve financial performance;

Work in close cooperation with other Engineering disciplines such as Systems, Stress, Materials & Processes,

Propulsion, and Support Groups such as Logistics, Methods & Quality in order to achieve the company's business objectives.

University or a College degree in Aerospace or Mechanical engineering or in a related field.

Minimum of 3 years of Material Review Board (MRB) or airframe design experience in aerospace.

In-depth knowledge of aircraft structures & system installation technical requirements.

Have a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure production environment.

Practical working experience using Catia V4/V5 or AutoCAD.

Must have experience (browser experience) with CATIA and Enovia V5.

NCMS - MRB Software experience is an asset.

Must have prior MRB Experience.

Candidates must have relevant experience in Liaison.

Flexible in schedule as assembly equipment occurs on multiple shifts (day, evening, night and weekend).

Bilingual (French and English) is an asset.
 
Job Number: 2168
Job Location: Mirabel, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 07/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2175 - STRESS ENGINEER - resume - word doc. only

Description:
Stress analysis in support to Non Conformity Reports (NCR) raised during production by working closely with production and liaison engineering.

Preliminary and detailed sizing.

Stress analyses to ensure requirements (static, fatigue, damage tolerance, weights, customers) are met.

Validation of engineering drawings and IPDT support.

Preparation of certification reports and support to entry-into-service.

Have a University mechanical or civil or aerospace engineering degree with a minimum of 5 years relevant experience.

Experience should include at least one of the following skills in the structural integrity qualification (loads, static, fatigue, and damage tolerance) of airplane components.

MRB Structures Stress on Client aircrafts is an asset.

Knowledge of CATIA, finite element modeling/analysis, and Nasgro is an asset. General computer skills are essential.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Must be able to read and write in English and have good communication skills.

Being completely bilingual (French and English) is an asset.
 
Job Number: 2175
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2180 - CABINET DESIGNER - resume word doc only

Description:
Act as a specialist in a specific system / monument

Define technical specifications, mechanical/electrical interfaces, design, integrate, certify, test and troubleshoot the above described systems.

Organize and attend design reviews taking into consideration industry regulations, client's aerospace design practices and requirements.

Be in direct contact with suppliers and responsible for the delivery of quality engineering documentation that meets Bombardier Standards.

Research, design and evaluate new technical concepts or emerging technologies. (Trade Shows, Air Shows, technical exhibitions, etc).

Procure parts and supply instructions drawings to employees to build mock-ups/prototype.

Provide definition engineering in relation with new designs%u2026

Support the creation of Interface Control Drawings (ICD)

Report status, identify and mitigate roadblocks

Point of contact on a technical level for designers

Accountable for engineering deliverables and milestones for a group of monuments

Must have a bachelor's degree in Mechanical Engineering with 5 to 8 year experience

Knowledgeable in 3D design with CATIA V5

Well organized and project oriented.

Team player, working in a multidisciplinary team.

Customer-oriented with innovative problem solving skills and you are organized.

You are autonomous, flexible and oriented toward result via your project management skill.

Experience with and have lead a small group of designers or equivalent.

Design experience in cabinet assembly design and/or cabinet installation

Good communication skills in French and English (written and verbal) are assets
 
Job Number: 2180
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 07/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2182 - LIAISON ENGINEER - resume - word doc only

Description:
Be responsible for providing engineering support to the production operations at the St-Laurent Assembly

Business Unit (Challenger, CRJ, CSeries, Global & Airbus) and interact with various engineering departments in a schedule driven environment.

Design, analyze and disposition repairs for structural non-conformance reports (NCR) in a timely manner to restore design integrity for aircraft in production

University degree in Mechanical Engineering.

You have MRB experience in the Aerospace field.

You possess Catia and MRB (Material Review Board) work experience.

This position requires energetic people with good communication skills, who are willing to accept responsibilities in a team working environment.

You must also be a person with initiative, strong sense of responsibility and good engineering judgment.

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc)

Bilingualism would be an asset.
 
Job Number: 2182
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/22/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2183 - STRESS ENGINEER - resume - cv. word doc only

Description:
Preliminary and detailed sizings.

Stress analyses to ensure requirements (strength, fatigue, damage tolerance, weights, customers) are met.

Validation of engineering drawings and IPDT support.

Preparation of certification reports and support to entry-into-service.

Have a University mechanical or civil or aerospace engineering degree with a minimum of 5 years relevant experience. Your experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Knowledge of CATIA, finite element modeling and analysis is an asset. General computer skills are essential.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Must be able to read and write in English and have good communication skills. Being completely bilingual (French and English) is an asset.

Must have knowledge and experience of structural sizing methodologies.

Must be competent in one of the following and have some knowledge of all other aspects of analysis (Structural stress analysis, FEM, fatigue/DTA and loads).

Must have experience in at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Must have Excellent knowledge of aircraft structure and system installation technical requirements ( TCCA, FAA & EASA).

Must have Experience of working with new design and must be able to demonstrate understanding of aircraft component load path and functions.

Must have experience using Patran and Nastran.

Must have working knowledge of Catia V5, finite element modeling and analysis is an asset.

Must be computer literate and familiar with commonly used software ( MS Office )
 
Job Number: 2183
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2184 - MASS PROPERTIES ENGINEER - resume - word doc only

Description:
Have a degree in Mechanical or Aerospace engineering, with a minimum of 5 years of experience in Mass Properties engineering.

Are familiar with fuel burn sequencing, aircraft center of gravity principles, weighing reports, flight envelope (MZFW, NLG load, MTOW, MRW, MLW, etc.), load sheets, etc.

Have a background in aircraft performance, flight sciences and mechanical structures.

Are familiar with aircraft interior materials, including but not limited to composite panels, metallic structures and plastics.

Are familiar with engineering drawings, drafting principles, change management, and are comfortable reading engineering drawings.

Have strong proficiency in Microsoft Office (especially Excel). Knowledge of Visual Basic is considered an asset.

Must have practical knowledge and experience of CATIA/Enovia V5.

Have the ability to resolve engineering problems in a manufacturing environment and able to manage very complex and critical engineering projects with minimal supervision.

Have strong communication skills both in English (written, spoken) and French (spoken).

Knowledge in Weight tracking in completion is a strong asset.

Must have practical knowledge and experience in aircraft structure and completion components.

Join the Client Completions Centre responsible for the production of the Client aircraft. Our goal is to provide the ultimate customer experience for the world most luxurious business aircraft cabin interiors.

Work in a team of engineers to support operations, aircraft delivery and new product development.

Sign off on packages of engineering drawings ensuring compliance to regulations.

Interact with customers, partners and other engineering teams.

Create and issue engineering reports consistent with aerospace requirements.

Support a flexible work schedule.
 
Job Number: 2184
Job Location: Montreal, Canada
Rate: 50.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 06/19/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2191 - STRUCTURAL STRESS INTEGRATOR - resume word doc only

Description:
Perform sizing and support design activities for major interfaces between Structural Suppliers.

Monitor, support and provide guidance to the work package Structural Suppliers to ensure a quality product and supporting documentation are produced.

Ensure the harmonization of sizing methodologies and guidelines between the Structures work packages.

Review and approve structural substantiation reports from the Structural Suppliers.

Support the development, execution and revision of data for material allowable and sub-component structural testing.

Participate and assist in the coordination of Certification activities that directly pertains to the work package.

Provide clear visibility to management of the status and/or emerging issues related to the supported activities.

Bachelor's degree or a Master's degree in mechanical/aerospace engineering and a minimum of 15 years of relevant experience in the aerospace industry.

Previous experience in Aircraft Structural substantiation analysis.

Knowledge and experience of structural sizing methodologies as well as allowable and sub-component testing for composite material is a definite asset.

This position requires a confident, knowledgeable and energetic person with excellent communication and listening skills that is able to work in a team environment.

Must have experience using Patran and Nastran.

Must have working knowledge of Catia V5.

Previous experience in an integration role or function is required.

Must have excellent troubleshooting and problem solving skills.

Must have excellent communication skills.
 
Job Number: 2191
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 06/19/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2192 - SR&ED TAX CREDITS COORDINATOR

Description:
Coordinate the engineering activities of the SR&ED (Scientific Research & Experimental Development) tax credit program in Client with the Client taxation organization and a network of Business Units specialists.

Advise and provide training to Business Units specialists on the application of SR&ED tax credit eligibility rules in their activities.

Review and approve projects or SR&ED activities submitted internally by the business units

Develop tools and solutions to support the SR&ED tax credit claim.

Act as the point of contact with Business units and Canada Revenue Agency on technical matters under your responsibility.

Prepare and support audits by the Canada Revenue Agency.

Propose and execute continuous improvements linked to your mandates.

Team player; you share common goals with your business partners and put people first.

Have an engineering background, preferably a master in Aerospace, Mechanical, Electrical engineering or similar degree.

Acquainted with the Canada Revenue Agency SR&ED tax credit program, and have a minimum of 5 years' experience applying the program in Aerospace or other industries.

Understand aerospace technical challenges and look forward to further you understanding of innovation processes.

With an analytical mind, rigour and focus are your strengths.

Are able to concurrently execute regular activities and capture ad hoc opportunities

Possess good leadership and communication skills, and are very comfortable dealing with external parties.

Fluency in both English and French, written and oral forms, is required.

Must be proficient with MS Office applications including MS Project, Power Point, Excel and Access.

Canadian or Canadian Perm Residence only.
 
Job Number: 2192
Job Location: Montreal, Canada
Rate: 74.00 Canadian
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 06/19/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2193 - HYDRO-MECHANICAL SYSTEMS ENGINEER - word doc only

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems

Coordinate product development activities between the supplier of the system and the affected work packages

Ensure successful design, validation, certification and delivery of the system

Ensure successful completion of each development phase deliverables (may author, review, approve)

Problem solve the technical issues in a cross functional environment

Be involved in the design and integration of the system

Review the design and documentation of all the aspects related to your system

Check for quality of the Supplier's analyses

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing

Define, prepare and execute qualification and certification tests

Work with supplier in the investigation and resolution of test findings

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years

Background in design, integration, development and certification of Hydro-Mechanical Systems

Knowledgeable of the relevant Airworthiness Regulations and certification process

Good oral and technical writing skills in English (required)

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers

Dynamic person with initiative, a strong sense of responsibility and good judgment

Knowledge of MS Office software (essential)

English - French working knowledge an asset
 
Job Number: 2193
Job Location: Montreal, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 07/18/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2196 - RM&S ENGINEER - resume word doc only please.

Description:
Be part of the Client R,M&S team, for the Client aircraft, and the primary tasks are to conduct aircraft safety and/or system safety activities, and to support all design activities.

Be responsible for RM&S deliverables specific to the assigned systems.

Participate in the, system functional hazard analysis, aircraft and system fault tree analysis, system safety assessment, failure mode and effect analysis and the final R,M&S certification report.

The duties will also require certification activities. This will involve co-ordination of technical issues and resolutions across all Client, Partner/Supplier, Regulatory and Customer parties.

University graduate in electrical/mechanical engineering with at least 15 years R,M&S experience.

Have a strong electro-mechanical background and has an excellent understanding of aircraft performance characteristics, aircraft systems definition, integration, interfaces, component qualification, reliability and safety requirements and certification process of flight controls systems.

Preferably have been directly involved in the aircraft definition and certification.

Must be very cognizant of the relevant Airworthiness Regulations and certification process.

Have the ability to communicate sound technical proposals and work status to senior management, be a team player, a self-motivated person and be able to work under pressure.

Possess a strong sense of responsibility and integrity.

Have good oral and technical writing skills in English are required (French is an asset).

Possess basic knowledge of MS Office.

Knowledge of creating Failure Mode Effect Analysis (FMEA), Fault Tree Analysis (FTA) and Safety Analysis is required.

Aircraft Level System Safety, preferably in Hydro-Mechanical but could also be Electrical Avionics.

Must have Aircraft Level Knowledge of the following:
In-depth aircraft level understanding FMEA - Failure mode and effects analysis
FTA - Fault Tree Analysis, CMA - Common Mode Assessment
CCMR Process - Candidate Certification Maintenance requirement
25.1309 Regulation
ARP4761 Safety process

Software Skills:
CAFTA required
Must be proficient with Excel
MS Access database development would be asset
Microsoft Office Suite
CATIA would be an asset
 
Job Number: 2196
Job Location: Montreal, Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2205 - STRUCTURAL GROUND. TEST INTEG. - resume word doc only

Description:
Lead multi-functional ground test review meetings.

Coordinate EXP internal activities to meet schedule and budget.

Work in close relationship with EXP Management and Program team.

Provide detail schedule and Status Report.

Execute EXP Test Portfolio following established priorities.

Interact technically with Client Suppliers to achieve Montreal site mandate.

Work in close interaction with Shop and QC (union staff).

Manage budget/operating plan definition and periodic tracking.

Prepare presentations and information for upper management.


Have a Degree in Mechanical engineering or equivalent experience.

Have a minimum of five 5 year experience in the aerospace industry, with close interaction with engineering and production teams.

Have strong communication skills both in English (written, spoken) and French (spoken).

Have good knowledge of MS Project (intermediate or advanced user).

Are a strong team player and can demonstrate superior organizational and leadership skills.

Are driven by results and autonomous.

Previous experience in Project Management is required.

A positive attitude and able to work in a fast-paced, high-pressure environment.

Must have strong communication and negotiation skills.

Must have excellent troubleshooting skills.

Must have Excellent Presentation Skills.
 
Job Number: 2205
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2215 - DESIGNER & STRESS ANALYST - cv - word doc only

Description:
Preliminary and detailed sizings.

Stress analyses to ensure requirements (strength, fatigue, damage tolerance, weights, customers) are met.

Validation of engineering drawings and IPDT support.

Preparation of certification reports and support to entry-into-service.


University mechanical or civil or aerospace engineering degree with a minimum of 5 years relevant experience.

Your experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Knowledge of CATIA, finite element modeling and analysis is an asset. General computer skills are essential.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Must be able to read and write in English and have good communication skills. Being completely bilingual (French and English) is an asset.

Must have experience in Primary and Secondary Aircraft Structures.

Must have experience with Mechanical systems and systems installations.

Must have experience in design and creation of MBD and 2D drawings of detail parts (machined parts, sheet metal), assemblies and installation drawings in CATIA V5.

Must have working knowledge of CATIA V5 (minimum 2000H experience).

Must have the ability to understand complex engineering issues.

Basic knowledge required :
- 3D and MBD creation in CATIA V5
-GD&T and technical drawings
-Certification rules
-Manufacturing requirements

Must be computer literate and familiar with commonly used software ( MS Office )
 
Job Number: 2215
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/30/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2217 - AIRCRAFT PERFORMANCE ENGINEER - cv word doc only

Description:
Attend flight test brief/debrief for performance flight test points

Provide fast turnaround evaluation of test points (pass/fail) prior to next flight.

Data reduction of test points and creation/substantiation of aircraft performance models

Writing reports that will be used for demonstrating compliance with Airworthiness regulations

Creation of data for use in Aircraft Flight Manual Performance section (takeoff and landing data).

Creation of data for use in the Flight Planning manual (climb, cruise and descent data)

Creation of data for use in the Quick Reference Handbook.

Provide support to the Flight Management System database generation and testing (both certified and non-certified data).

Provide support to various performance studies and analysis as required by the client.


Bachelor's degree in Aeronautical (or Mechanical) engineering as well as a minimum of 5 years of experience in the domain of aircraft performance during the development, certification and/or in-service support of aircraft;

Possess good interpersonal skills in order to work in team and interface with other groups, suppliers and management as well as good written and oral communication skills in English.
Good programming skills (FORTRAN, Visual Basic) and a working knowledge of a UNIX operating system environment;

Work independently and demonstrate initiative to achieve the goals established for you and work well in small, dynamic environment.

English - French working knowledge an asset.

Prior Testing Experience (Flight or Ground) is an asset.

Must be customer-oriented with innovative problem solving skills.

Must have excellent troubleshooting skills.

Must be detail oriented.

Knowledge of certification requirements is an asset.

Must have a positive attitude and able to work in a fast-paced, high-pressure environment.

Must be familiar with Aircraft Flight Manual Data.

Knowledge of French would be an asset;
 
Job Number: 2217
Job Location: Toronto, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2nd Shift Maintenance Technician

Description:
Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

For consideration to this position, please contact Eric Khassanov at ekhassanov@pdstech.com or 843-277-6611.
 
 


 
Job Number: 1610057656
Job Location: KS City, MO
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FgpWAAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
9 Mechanical Systems Design - Active Sceret Clearance

Description:
Active Secret Clearance Required (background investigation has to have been completed or updated within the last 5 years).
Experience with all type of aircraft systems design including, flight controls, ECS, fuel systems, wire routing, etc.  Must also have experience with UG (NX+), as well as Catia V5.  Apply knowledge of engineering principles and techniques to the design and development of mechanical or electrical operating systems. Ability to evaluate designs and perform trade studies for performance, functional adequacy, cost effectiveness, and regulatory compliance. Ability to develop specifications and oversee supplier hardware development, test, and certification programs. Knowledge of thermal analysis, stress analysis, material selection, packaging methods, routings and installation in aircraft environments. Knowledge of drafting and dimensioning fundamentals. Knowledge of three dimensional CAD software for development of details, assemblies, and installation drawings. Areas of expertise may include design of hydraulics, pneumatics, miscellaneous fluid systems, mechanisms, wire harness, and electrical equipment installation.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Wichita, KS
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 07/11/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

A&P Mechanic

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a mid-size but rapidly growing company in Seattle, WA that was founded in 2001. They have a new flight test facility in Moses Lake WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Primary Role: Performing routine and periodic maintenance throughout all phases of flight testing; maintaining quality and safety standards; keeping records; maintaining equipment and supplies.

Secondary Role: Support flight test engineers and ground operations personnel as necessary by helping to install test instrumentation, wiring, and custom manufactured hardware.


Job Duties and Responsibilities:
Perform daily pre and post flight inspections.
Perform routine servicing of aircraft systems.
Perform aircraft systems checks and calibration as required.
Trouble shoot and repair pre and post flight squawks in a timely manner.
Assist in the installation and removal of essential flight test instrumentation hardware and wiring.
Routine removal of panels to route and access flight test instrumentation wires and hardware.
Maintain safe operations and workspace.
Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.
Knowledge/Skills/Abilities:

Experience in maintenance support related to flight test is desired but not required.
Experience with or willing to learn working in a flight test environment.
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong organizational, time management and prioritization skills:

Education
High School Diploma
Formal training in Aviation Maintenance Technologies or other related field
A & P Certificate or equivalent Certificate
1-5 years minimum experience maintaining commercial and/or regional aircraft
 
Job Location: Moses Lake, WA
Rate: open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: Now
Input Date: 01/16/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: smcglinsey@velocity-cs.com
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst

Description:
** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years. They must be able to obtain and maintain a U.S. Security Clearance at the appropriate level **
** Candidates must be U.S. Citizens **
** Must be able to satisfy federal government requirements for access to government information. Permanent residents are not eligible for this role. Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible **

Description:
-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.
 
Job Number: 7118872
Job Location: jupiter, fl
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/16/2017
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst

Description:
Aero Thermal Fluids Analyst

Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
Duration: 1 year contract

** Candidates must have an Active Secret clearance or have had a Secret clearance in the last two years**
** Candidates must be U.S. Citizens **
** Must be able to satisfy federal government requirements for access to government information. Permanent residents are not eligible for this role. Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible **


Duties:
-Conduct aerothermodynamics and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.

Skills:
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education:
- B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: 7488
Job Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 07/31/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst with active secret / ANSYS heat transfer CFD aerothermodynamics liquid rocket engine systems turbomachinery combustion devices FL URGENT

Description:
159855/7118872
Job Title: Aero Thermal Fluids Analyst
Jupiter FL
62/hr max
12 months
Active Secret Clearance required



Remaining Positions: 3

Duties:
** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years. They must be able to obtain and maintain a U.S. Security Clearance at the appropriate level **



** Candidates must be U.S. Citizens **



** Must be able to satisfy federal government requirements for access to government information. Permanent residents are not eligible for this role. Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage or Sterling / Talentwise. See attachment for specific background check onboarding requirements **





-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.

-Develop thermal models to design and analyze cooled and un-cooled engine components.

-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.

-Design, test and analyze data from component rigs to supplement or validate analytical models.

-Support planning and testing of engines (ground and flight) and analyze the test data.

-Document work performed in the form of reports and briefings.

Skills:
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.

-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education:
B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: MB-7118872
Job Location: Jupiter, FL
Rate: 62/hr max
Duration: 12 month contract
Input Date: 08/02/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace CMM Inspectors - Hawthorne, CA

Description:
STS AeroStaff Services is currently hiring Aerospace CMM Inspectors for open positions in Hawthorne, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Surface plate work/inspection
• Inspect supplied product according to the applicable drawing and or work order specifications to verify that it conforms to all design requirements
• Perform repetitive inspection following standardized methods
• Perform receiving inspections, first article inspections, and production inspections
• In-Process Inspection: Visual and/or dimensional inspection of precision machined and sheet metal parts
• Interact proactively with other departments to improve products and reduce cost
• Communicate help resolve quality related issues as they relate to the shops production and Document production non-conformances in accordance with prescribed procedures and processes as required
• Support Quality Management System policies and procedure documentation, assess compliance to company and industry standards, initiate and lead continual improvement and Lean Manufacturing initiatives
• Work in a cross functional environment utilizing PC-DMIS programming skills as applied to an Articulating Romer ARM and CMMs
• Create, maintain and verify CMM programs used for the measurements of manufactured and supplied parts
• Performs documentation review and verification of certifications, specifications, and conformance to design and specification requirements

Basic Qualifications:

• Must be a U.S. Citizen
• High school diploma or GED is required
• Must be knowledgeable of sheet metal fabrication process
• Experienced with the inspection of sheet metal parts
• Able to read and interpret various mechanical drawings and blueprints
• Ability to utilize hand tools for inspection, i.e. micrometers, calipers, scales, gauges and height gauges
• Clear understanding of document control processes
• Ability to relate and interact with staff at all levels of the organization
• Works independently and is self-directed
• Experience with GD&T is desired
• Able to multi-task between production checks and FAIs
• Minimum of 3 years’ of precision mechanical inspection experience required
• Minimum of 3 years of CMM or ROMER/Faro Arm experience required
• At least 3 years’ of practical experience in a launch vehicle/spacecraft hardware integration environment
• Must be able to read and interpret design drawings and CAD models

Preferred Skills and Experience:

• Aerospace precision inspection experience
• ISO 9001 / AS9100 experience
• CMM experience with PC-DMIS software experience
• NC inspection experience with PC-DMIS NC/ CAPPS NC
• Romer Arm experience with Verisurf/ PCDMIS software
• Solid computer skills in Microsoft Word, Outlook and Excel
• DCC (Direct Computer Control) experience
• Statistical process controls experience a plus
• Ability to detect design and drawing flaws
• Ability to read and interpret engineering drawings and specification using ASME Y14.5
• GD&T and skillful use of metrology tools and gauges
• Example: Thread gauge, profilometer, height gauge, calipers, micrometers, etc.

Additional Requirements:

• Must be able to lift up to 25lbs. unassisted
• Must be able to work either 1st Shift (5:00am-3:30pm) or 2nd shift hours (3:30pm-2:00am) based on staffing needs, and overtime as needed
• Must be able to stand for extended periods – 8 hours min
• Must be able to work all shift hours, able to work overtime and weekend as needed

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38989
Job Location: Hawthorne, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 06/13/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Design Engineer

Description:
Role:Aerospace Design Engineer

Location:Colorado Springs, CO

Duartion:6 months+

BS or MS Aerospace, Mechanical, or Metallurgical Engineering Degree, Minimum 3.0/4.0 GPA

A minimum of 4 years of engineering experience in designing mechanical products (preferably aerospace).
•Knowledge of FAA/ aerospace requirements
•Strong interpersonal skills and skills facilitating working in a teamwork environment
•3D CAD experience with high end CAD software (preferably Unigraphics NX)
•Strong experience in using Excel based tools for weight or other analysis.
•Experience in working with PLM systems (preferably Teamcenter)
•Experience in developing/ using weight management tools/ systems preferred.
 
Job Number: 51829
Job Location: Colorado Springs, CO
Input Date: 06/13/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bala
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Quality Assurance Inspectors (Composites Production) - Hawthorne, CA

Description:
STS AeroStaff Services is currently hiring Aerospace Quality Assurance Inspectors (Composites Production) for open positions in Hawthorne, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

As a quality inspector you will be responsible for being the last line of defense in assuring mission success. You will perform in-process inspections and verify that all key performance and design characteristics are met or exceeded during test preparation and Acceptance Testing. You will be working hands on with the most cutting edge rocket technology currently available and will be part of history.

Job Duties:

• Perform receiving, in process, and final inspection on Structures and Propulsion major subassemblies, including mechanical, electrical, electro-mechanical, pneumatic and hydraulic parts, components, and sub-assemblies
• Inspect, verify, and proactively support Structures and Propulsion development and acceptance testing; assuring adherence to design, specification, and testing requirements
• Document production and test anomalies in accordance with prescribed procedures and process as required
• Assist with the specification, purchase, and maintenance of calibrated measuring and test equipment
• Communicate and help resolve quality related issues as they relate to the site and other client locations i.e. Launch Site, Production, and Manufacturing.
• Process non-conforming product
• Routinely observe technical operations and offer guidance and/or serve as an additional technical resource
• Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment

Basic Qualifications:

• Associate’s degree in relevant field required
• Minimum of 3 years’ of experience in an aerospace environment required

Preferred Skills and Experience:

• Airframe and Powerplant License
• Knowledge of Quality Assurance principles, methods, and processes
• Knowledge of Avionics and electrical systems is preferred
• Knowledge of Aerospace Propulsion and Principles is preferred
• Knowledge of Aerospace Structures is a plus
• Knowledge of GSE Systems and general associated equipment is a plus
• Preference will be given to qualified local candidates
• Strong knowledge and experience in Aerospace Standards and its general practices
• Intermediate skill level with Windows operating systems
• Intermediate skill level with Microsoft Office (Excel, PowerPoint, Word, Outlook)

Additional Requirements:

• Ability to work at elevated heights
• Physical effort including standing, lifting and carrying moderately heavy materials or equipment (15 to 50 lbs.)
• Typically exposed to work in extreme outdoor environments – heat, cold, rain
• Work occasionally performed in an environment requiring exposure to fumes, odors, and noise
• Typically 50 hour work weeks, schedule varies depending on site operational needs, flexibility required

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38948
Job Location: Hawthorne, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 06/12/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Test Engineer - California

Description:
Leading aircraft company are seeking an experienced Aerospace Test Engineer to support the development, integration and testing of an ejectable flight data recorder project. This is in the early stages of the project and the role will support all phases of system development including design and analysis, requirements compliance methods, certification (verification / validation) test preparation, and integration into large scale commercial aircraft environments.

Responsibilities include:

* Identify testing required for verification and validation using industry standards & regulations
* Prepare system and component functional and performance certification test procedures, manufacturing test methods and procedures, in accordance with input from other team members.
* Review and evaluate identified program functional and performance requirements for applicability to program goals and objectives.
* Establish testing protocols and test requirements based upon test specifications, drawings, as well as manufacturing and process specifications.
* Identify industry standard test equipment and resources
* Conduct and/or witness mechanical and environmental tests for FAA certification. .
* Test and certification will include subcomponent and component system qualification, for both mechanical and electrical requirements
* Position will require interfacing with the FAA or designated engineering representative, preparation of technical status presentations and leading detailed test reviews.

You will have considerable experience in aerospace structural and electrical testing and must be familiar with aerospace test standards MIL-STD-810 and DO-160, with DO-178 and DO-254 knowledge preferred. A working knowledge of CATIA V5 and DOORS requirements management tool would also be useful.

Experience must include a strong background in the aerospace engineering requirements and verification process and the ability to understand mechanical and electrical aerospace drawings, environmental requirements, test requirements, and various aerospace test methods.

This is an initial 12 month contract, working on a long-term project, so work is likely to extend for at least 2 years, with the possibility of the position becoming a staff role.
 
Job Number: JO0000000012
Job Location: Newport Beach, CA
Rate: to $75/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/06/2017
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerothermodynamic Analyst - Secret Clearance

Description:
Title: Aerothermodynamic Analyst
Location: Jupiter, FL
Duration: 1 year contract
Pay Rate: $62.00 per hour

Active Secret Clearance required.

Job Duties
Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
Develop thermal models to design and analyze cooled and un-cooled engine components.
Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
Design, test and analyze data from component rigs to supplement or validate analytical models.
Support planning and testing of engines (ground and flight) and analyze the test data.
Document work performed in the form of reports and briefings.

Education:
B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: JG370587
Job Location: Jupiter, FL
Rate: $62.00
Duration: 1 year
Start Date: ASAP
Input Date: 06/12/2017
Firm Name: CDI CORPORATION
Attention: Jason Greer
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Stress Engineers - Active Secret Clearance

Description:
Composite Structural Analysts
Role description & Responsibilities:
Highly motivated structural analysis engineer with composite structures and assemblies for military and/or commercial aircraft. The candidate should also have experience with the characterization of composite materials with ASTM standard tests. Responsibilities will include but are not limited to the analysis of laminates, sandwich structures, bonded and bolted assemblies, and leading composite material characterization activities including: authoring test plans and test reports, data reduction and calculation of material allowables.
Experience Requirements:
� MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE
� BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 7 years related experience in design engineering function
� Minimum of 4 years of experience with Abaqus and/or Nastran
� Static structural and structural/thermal analysis
� Buckling, stability, and modal analysis
� Loads definition
� Material characterization testing
� Knowledge of composite materials and manufacturing processes
� Oral and written communication skills
� Ability to work in a fast paced dynamic environment as part of a multi-discipline team

Experience Preferred:
� Proficiency with NX, Catia V5, Fibersim, MSC Marc, Altair Hyperworks/Optistruct, and Hypersizer are also desirable
� Definition of layups and ply patterns with Fibersim to generate finite element models
� Script writing, workflow automation
� Constitutive Model Development and implementation
� Requirements definition and verification
� Previous experience in aerospace manufacturing facility
Skills & Qualifications:
� Strong interpersonal skills with the ability to work with a team
� Excellent communication skills are required.
� Ability to make sound decisions
� Ability to multi-task
� Ability to prioritize and manage time effectively
Education/Certifications:
� BS degree in Civil, Mechanical, Aerospace Engineering, or related

The Structures Company is an AA/EOE.
 
Job Location: UT
Rate: $75-95/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 06/09/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft System Integration

Description:
Aircraft System Integration

Location: Savannah, GA
Pay Rate: $50/hr - $55/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
1. CATIA Knowledgeware and SmarTeam experience desirable.
2. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
3. Experienced in engineering review of 3D models and PLM data for integration criteria including, but not limited to, system separation, clash analysis, kinematics and standard part usage is desirable.
4. Experience with mechanical assemblies and manufacturing technique design.
5. Excellent communication skills, written and verbal. Ability to lead daily sign off meetings.
6. Use and understanding of Dimensioning and Tolerancing including familiarity w/ ASME Y14.5 required
7. Use of Microsoft Word, Excel and Power Point for creation of reports.

Education and Experience Requirements:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 yrs in specific technical discipline or 10 yrs broad eng exp in several technical disciplines w/ Bachelors.
-Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7302
Job Location: Savannah, GA
Rate: 50.00-55.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/20/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr

Description:
Airworthiness Inspector Sr
Long Beach, CA
Long Term Contract
$30.00-39.10/Hr

Unique Skills:
Proven ability to work as part of a team

Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.

Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:

Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.
 
Job Number: 6875
Job Location: Long Beach, CA
Rate: 30.00-39.10
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/11/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Assembler - Level 1

Description:
PDS Tech, Inc. is seeking a candidate for Assembler- Level 1 in Redmond, WA.
Various shifts available. 

  • Assembles fabricated parts at floor stations.
  • Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
  • Uses hand tools and power tools to assemble units according to product specifications.
  • Identifies units that fail tests or tolerance levels and repairs as necessary. 
  • Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
  • Relies on instructions and pre-established guidelines to perform the functions of the job.
  • Works under immediate supervision. Primary job functions do not typically require exercising independent judgment.
  • Typically reports to a supervisor or manager.

Special Considerations:
Lifting is generally in the 10 to 15 Lbs. range with minimal repetitions.
Exposure to machinery, chemical, biological, and physical risks is minimal. 
Position will require regular use of a microscope.

Additional qualifications and considerations: 
Experience using and comfortable with a microscope for assembly and inspection of parts. 
Experience working in a class 1000 cleanroom. 
Comfortable working with chemicals and using personal protective equipment. 

 

  • The minimum level of education required for ISC assignments is High School diploma/GED.
  • Suppliers should obtain a copy of the candidates highest level of education (HSD/GED or degree) to avoid delays in onboarding.

 
Job Number: 1710069437
Job Location: Redmond, WA
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: 12720 GATEWAY DR S STE 102
City, State: TUKWILA, WA 98168-3333
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002K46JAAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembly Mechanic

Description:
 Looking for a candidate that has more of a “mechanical” background. This truly is targeting an entry level candidate with a mechanical aptitude (i.e. recently finished, or in process of finishing, trade school. Perhaps high school graduate with mechanical interest).
 There should also be a general understanding of blueprints

Summary

To perform moderately complex assembly of electronic and mechanical parts and assemblies in accordance with engineering drawings and specifications.

Responsibilities:

> Sets up and fabricates moderately complex electronic and mechanical assemblies utilizing various forms of written and oral instructions, automatic and semi-automatic machines and hand tools.
> Specific duties vary by workload and cover a range of assembly techniques including harness and cable fabrication, electro-mechanical assembly.
> Performs administrative tasks associated with assembly operations which include Manufacturing Order documentation, production problem transmittal generation, and shelf life maintenance.
> Resolves manufacturing problems.
> Maintains good housekeeping, safety standards, and calibration requirements.
> May set up production equipment.
> Practices Total Quality principles and concepts.

Qualifications:

> Entry level position with little or no experience required. High school diploma, or equivalent education or experience to demonstrate the ability to successfully perform the job duties.
> Specialized and extensive experience in mechanical assembly techniques.
> Military and commercial quality specifications.
> Manufacturing policies and procedures.
> Ability to read and interpret complex instructions, procedures, and engineering drawings/specifications.
> Ability to use measuring instruments, set-up/operate fabrication equipment in work area(s) & plan and organize work.
> Ability to concentrate while discriminating colors & small details, good hand/eye coordination & Finger/hand dexterity.
> Knowledge of shop math and ability to apply math skills.
> Electrostatic discharge procedures and methods.
> Ability to work well with others employing team principles.
> Must be able to work in small confined areas, be flexible in work hours and be able to lift up to 20 to 30 pounds
> All requirements are subject to possible modification to reasonably accommodate individuals with disabilities.
> Applicants selected will be subject to a government security investigation and must meet eligibility requirements, including US Citizenship, for access to classified information.


Mark A Ludwig
Vice President / Sr. Account Executive
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
www.globalamericanstaffing.com
 
Job Number: 014_2017
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 07/21/2017
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Automotive Overhead Systems Engineer

Description:
If Interested then please send resume at ravi@iconma.com or call me back at 804-915-6529.

This is an overhead systems engineer position for current product MDX, Pilot, Ridgeline and Mercedes programs in the Honda Business Unit reporting directly to the project engineering manager/chief engineer. The engineer will be responsible for the design, development, and integration of overhead system in support of customer requirements. This includes supporting the overhead systems design and directly interfacing with the customer and providing engineering direction during design reviews with Manufacturing, Purchasing, and Quality divisions within company, customer, and suppliers. The overhead systems engineer will oversee integration of design development including all support groups, analyze requirements, and develop resolutions.

Job Qualifications:
- Willingness to travel to customer facility (Mid-Ohio) and suppliers and JIT plant (Alabama)
- Understanding of overhead systems design integration of fabric plastics, structures, wiring, etc.
- Mechanical aptitude for problem solving using tools such as KT, A3, FTA, 8D, etc
- Basic computer skills (Windows, MS Office, etc.) and ability to learn/apply Adient-specific software (eg, PLM, EPIC, GLIMS, etc.)
- Understanding of basic GD&T and ability to facilitate/develop and implement on drawings
- Ability to conduct statistical analysis of data (performance/supplier dimensional data) and interpret data to understand trends.
- Catia V5 2D drawing and layout creation & 3D design
- Strong verbal and written communication skills with the ability to effectively, visually, and succinctly summarize and deliver information to the appropriate groups - Ability to plan and prioritize workload effectively – create personal tactical timing plans and manage internal/external workload accordingly
- Possess ability to engage and interact with a diverse team across cultures in a global environment
- Ability to develop and maintain positive and productive professional relationships with Internal (ex: BU Eng, Mfg., etc.) and External (OEM) customers.

Experience Required:
- 3+ years in overhead systems design engineering. Previous experience working with or supporting
Honda R&D and Mercedes strongly desired.
- Bachelor's degree in engineering required.
- 3-5 years of experience in Overhead systems designing.
 
Job Number: 17-08552
Job Location: Plymouth, MI
Duration: 6 months
Start Date: ASAP
Input Date: 06/19/2017
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

BFTC A/C Configuration Controller -WIC04059

Description:
PDS is looking for a BFTC A/C Configuration Controller:












In your role, you will:



  • Ensure (through discussion with Engineering and the Flight Crew) that proposed aircraft configuration changes, will not adversely affect upcoming ground or flight tests
  • Ensure that detailed aircraft configuration requirements (FTE Set-up Sheets) are met
  • Prepare, coordinate and authorize work to be performed on the aircraft, including development of the nightly work package
  • Act as the primary point of contact to authorize all work performed on the flight test aircraft
  • Prepare Pre-flight/Pre-Test Aircraft Configuration Briefing report and conduct briefings
  • Attend Post-flight/Post-Test debrief meetings and perform follow up coordination activities for discrepancies reported during testing
  • In coordination with Quality Assurance, plan and coordinate the timely execution of all Airworthiness Maintenance requirements, and maintain the tracking and timing of inspections, time life items and special maintenance items
  • Work closely with the Flight Crew and is familiar with the aircraft test schedule
  • Assist Lead Flight Test Engineer with the development of the short-term flight test schedule by providing input for upcoming maintenance, inspection and down time requirements.
  • Attend daily meetings associated with aircraft support issues and status briefings
  • Support offsite testing as required
  • Manage deferred maintenance items and coordinate resolution
  • Assist Project and Ground Operations with the development of downtime planning activities

























Qualifications












As our ideal candidate,



  • You must have 5-7 years of experience in the aircraft maintenance field as a Mechanic, Technician, or Inspector.
  • You must have 3-5 years of flight test experience
  • You must have the conflict resolution skills necessary to resolve daily issues in a professional manner
  • You must have a willingness to work weekend days and nights
  • You must have a willingness to work overtime
  • You must have a willingness to travel
  • You must be able to obtain a Canadian Work Permit


























 
Job Number: 1710068929
Job Location: Wichita, KS
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JtHNAA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia V5 Design Checker

Description:
1. CATIA Knowledgeware and SmarTeam experience desirable.
2. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
3. Experienced in engineering review of 3D models and PLM data for integration criteria including, but not limited to, system separation, clash analysis, kinematics and standard part usage is desirable.
4. Experience with mechanical assemblies and manufacturing technique design.
5. Excellent communication skills, written and verbal. Ability to lead daily sign off meetings.
6. Use and understanding of Dimensioning and Tolerancing including familiarity with ASME Y14.5 a must.
7. Use of Microsoft Word, Excel and Power Point for creation of reports.
 
Job Number: 24-171
Job Location: Savannah, GA
Rate: $50-$55/hr
Per Diem: YES
Overtime: YES
Duration: 1 yr+
Start Date: ASAP
Input Date: 09/01/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Checker

Description:
Ideal Candidates will have mechanical engineering and 2D/3D checking experience with Aircraft Cabin Interiors and Systems to include but not limited to:
• Seats
• Galley
• Lavs
• LRU installations
• Liners
• Water & Waste System
• Mechanism design and validation
• Prototype development

Education:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job
 
Job Number: 24-181
Job Location: Savannah, GA
Rate: $58 to $63
Per Diem: Yes
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 06/27/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Final Phase Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation.Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area.
 
Job Number: 24-179
Job Location: Savannah, GA
Rate: $58.00 - $63.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/01/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Mechanical Engineer

Description:
Completions Mechanical Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
- CATIA V5 and SmarTeam experience required
- Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavatories, liners, PSU's etc)
- Company Aircraft experience preferred

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Education:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7299
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/21/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Door Engineer

Description:
Composites Door Engineer guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions: 1. selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative CATIA V5 Experience Required Mechanical Systems Experience Required Composite Door Experience Desired Supplier Management Experience Desired


Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in the specific technical discipline or 15 yrs. broad engineering experience in several technical disciplines with Bachelors, or 8 yrs. in the specific technical discipline with Masters, or 6 yrs. in the specific technical discipline with PhD.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Door/Mechanical Engineer

Description:
Composite Door/Mechanical Engineer

Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
- CATIA V5 Experience Required
- Mechanical Systems Experience Required
- Composite Door Experience Desired
- Supplier Management Experience Desired


Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7450
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 06/29/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Door/Mechanical Engineering Contractor (TSII)

Description:
Unique Skills:

CATIA V5 Experience Required Mechanical Systems Experience Required Composite Door Experience Desired Supplier Management

Experience Desired

Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in the specific technical discipline or 15 yrs. broad engineering experience in several technical disciplines with Bachelors, or 8 yrs. in the specific technical discipline with Masters, or 6 yrs. in the specific technical discipline with PhD.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 103021
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 06/06/2017
Firm Name: INTERGEN GROUP
Attention: cort hayes
Address: SUITE 200
5051 PEACHTREE CORNERS CIR

City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Doors Design Engineer

Description:
• CATIA V5 Experience Required
• Mechanical Systems Experience Required
• Composite Door Experience Required
• Supplier Management Experience Desired

Education and Experience Requirements:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

Position Purpose:
• Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-184
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 08/08/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Aircraft System Intergration Engineer (TSI)

Description:
Unique Skills:

1. CATIA Knowledgeware and SmarTeam experience desirable. 2. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams. 3. Experienced in engineering review of 3D models and PLM data for integration criteria including, but not limited to, system separation, clash analysis, kinematics and standard part usage is desirable. 4. Experience with mechanical assemblies and manufacturing technique design. 5. Excellent communication skills, written and verbal. Ability to lead daily sign off meetings. 6. Use and understanding of Dimensioning and Tolerancing including familiarity with ASME Y14.5 a must. 7. Use of Microsoft Word, Excel and Power Point for creation of reports.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 98281
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 06/09/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: SUITE 200
5051 PEACHTREE CORNERS CIR

City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Mechanical Engineer - Tech Spec II

Description:
Unique Skills:
Must be proficient in V4 and V5 Catia with Smarteam experience. Must have experience with design and Electrical Equipment Installations or Aircraft Mechanical Systems design. Previous Aircraft STC modification experience is desired. Previous Experience preferred. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 68862
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 06/09/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: SUITE 200
5051 PEACHTREE CORNERS CIR

City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Structures MRB Engineer - Weekend Flight Test

Description:
Unique Skills:

- Bachelors degree in aerospace or mechanical engineering. - Minimum 10 yrs dedicated structures MRB Engineering experience at a recognized airframe manufacturer. - Experience should include creation of engineering dispositions for nonconformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, empennage). - Experience should be in an aircraft Production, Flight Test and/or schedule-driven environment. - Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in schedule driven environment. - Strong written/verbal communication and interpersonal skills. - Must be computer literate (such as Catia V5, Smarteam, Solumina, Word, Excel).
 
Job Number: 105661
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 06/14/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: SUITE 200
5051 PEACHTREE CORNERS CIR

City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Senior / Design Engineer

Description:
RESPONSIBILITIES
Creates basic designs of aircraft interiors, structures and mechanical systems for Fit, Form and Function to meet customer criteria, quality standards, FAA requirements, budget and project schedules using Computer Aided Drafting/Design tools.
• Designs and checks aircraft interior furnishing and/or structures.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.

TARGET QUALIFICATIONS
• Bachelor's degree (B.S.) in engineering, minimum of 5 years relevant experience, or equivalent combination of education and experience. Aviation background and aircraft interior experience preferred.
• Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

IN-DEPTH KNOWLEDGE, SKILLS, AND ABILITIES
• Ability to design and check interior engineering drawings for Fit, Form and Function.
• Strong Computer Aided Drafting/Design skills using AutoCAD and/or Inventor.
• Three dimensional (3D) design/drafting skills are preferred.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally as part of an established and growing team.
 
Job Number: 17-712
Job Location: Northwest
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Engineer

Description:
Duties involve contributing to machine concepts, design of control software, integration of software with electrical and mechanical systems, process development and machine installation at customer sites worldwide. Programming and integration assignments involve leading-edge technologies and processes utilizing PLC’s, PC’s, robotics, motion controllers, vision systems, laser and other controllers.

Responsibilities

Design, program and debug control systems for assembly and test equipment

Modify/retrofit existing systems

Communicate and interact with customers and suppliers

Manage projects within cost and time constraints

Communicate to Lead CE

Requirements

Minimum 4 years’ experience with machine controls

Strong knowledge of PLC’s (AB a must, prefer a combination of AB & Siemens)

Knowledge of Robotics and motion control a plus

Experience with HMI’s

Experience with AutoCAD preferred
 
Job Location: Chicago, IL
Rate: Open
Per Diem: Possible
Overtime: Yes
Duration: 3-12 mos.
Start Date: ASAP
Input Date: 06/12/2017
Firm Name: STERLING ENGINEERING
Attention: Gina McDermott
Address: 2 WESTBROOK CORP CTR STE 300
City, State: WESTCHESTER, IL 60154-5721
Phone: 630/993-3433
800 Phone: 866/478-3754
Fax Phone: 630/516-1192
Website: www.sterling-engineering.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer: Mechanical Systems

Description:
Design Engineer - Mechanical Systems
Mojave, CA
Long term contract: 12+ months
Pay rate: up to 65/hr

Desired Skills
CATIA;Mechanical system design and integration.
Job Description Rich
 
Perform  preliminary and detail design of aircraft mechanical systems, including flight controls, hydraulic systems and ECS systems.
Create 3D/2D definition.
CATIA V5 is a plus.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements.
Notes
6 paid holidays
Annual bonus
Sick pay
Per diem if qualify
401k
MUST be US Persons



The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: up to 65/hr
Per Diem: yes
Overtime: possible
Duration: 12+ months
Start Date: asap
Input Date: 10/17/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Design Engineers

Description:
CATIA V5, aircraft interiors, galleys, lavatories, secondary structures, mechanical

-Holiday Pay
-Medical
-Dental
-Vision
-Short-Term Disability
-Direct Deposit
-401(k) Immediate Enrollment
-Annual Bonus
-Referrals
-Personal Communications
 
Input Date: 01/23/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545, 817/354-5555
800 Phone: 866/758-2494
Email: resumes@agentetech.com
Website: www.agentetech.com

Design Quality Engineer 2/3-Secret Clearance

Description:
PDS Tech is seeking a candidate for the Design Quality Engineer 2/3-Secret Clearance position located in Melbourne, FL.  
Position Summary / Responsibilities
 
Develops, modifies, applies and maintains quality evaluation and control systems and protocols for processing materials into partially finished or finished materials product.
Collaborates with engineering and manufacturing functions to ensure quality standards are in place.
Devises and implements methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment.
Designs and analyzes inspection and testing processes, mechanisms and equipment; conducts quality assurance tests; and performs statistical analysis to assess the cost of and determine the responsibility for, products or materials that do not meet required standards and specifications.
Audits quality systems for deficiency identification and correction.
Ensures that corrective measures meet acceptable reliability standards and that documentation is compliant with requirements.
May specialize in the areas of design, incoming material, production control, product evaluation and reliability, inventory control and/or research and development as they apply to product or process quality.
May be certified in lean and six-sigma quality engineering methodologies.

(3 Positions) - Design Quality 



  • Design Quality Engineers will complement the current Design Assurance staff to provide more surge capability to stakeholder reviews of PDPs as the design process ramps up. 
  • Level 2: 2 Years with Bachelors in Science; 0 Years with Masters
  • Level 3: 5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.
  • Current DoD Secret Clearance

 
Job Number: 1710066863
Job Location: Melbourne, FL
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021kwUAAQ&URLSource=cjhunter

Director, Training & Flight Operations

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for Director, Training & Flight Operations, Customer Support Division for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

In this role, you will be responsible for the development and delivery of Regional Jet Customer training, flight manuals and flight operations engineering support. 



  • Training services include the development of courseware, training devices, training manuals and delivery of initial and recurrent training for Pilots, Technical/Mechanics, Cabin Crews, Ground Servicing Crews, and Dispatchers within an airline. In addition, this person must manage the relationship and performance of CAE, the Company's selected training service provider. 
  • Development, verification/validation and certification of flight operations manuals
  • Flight Operations Engineering support to Company's customers


Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team and team structure, implementing governance and communication processes, and evaluating the performance of the group.


Work Location
The Primary Work Location will be Nagoya, Japan.  Travel to USA or other country will be required.

Scope of Work
Specific Training responsibilities include:

  • Overall management of the relationship with and performance of CAE, Company’s training services provider, ensuring training devices and services are high quality at market prices
  • Development and maintenance of training curriculum and courseware for pilots, technicians/mechanics, flight attendants, and flight planning engineers, and ground handling services
  • Development and maintenance of training documentation for each course offered
  • Ensure there are sufficient qualified training instructors located at training delivery sites for the life of the aircraft
  • Ensure training devices (e.g., Full Flight Simulators (FFS), Integrated Procedures Trainers (IPT), Virtual Maintenance Trainers (VMT), Computer Based Training (CBT), Door Trainer and Cabin Trainers) & training facilities meet training objectives and are certified (where applicable) by regulators
  • Obtain regulator certifications such as OSD, FSB, etc.
  • Commitment of training services (both proforma and for fee) to customers as part of the airplane sales process
  • Scheduling customer training at a location that minimizes customer travel costs, meets customer requirements for timing (schedule), and fits within the Company's Training Program strategy.

 
Specific Flight Operations Support responsibilities include:

  • Define the process interfaces with Flight Test organization, Pilot organization and Flight operation engineering organization. 
  • Development, verification/validation, maintenance and delivery of all technical and administrative documents in support of customer’s flight operations.
    • Airplane Flight Manual (AFM)
    • Flight Crew Operating Manual (FCOM)
    • Quick Reference Handbook (QRH)
    • Weight & Balance Manual (WBM)
    • Master Minimum Equipment List (MMEL)
    • Dispatch Deviation Guide (DDG)
    • Flight Crew Training Manual (FCTM)
    • Cabin Crew Operating Manual (CCOM)
    • Aircraft Characteristics for Airport Planning (AC)



  • Ensure documents meet industry standards for content and format by participating in and influencing industry standards board that define flight operations documentation requirements
  • Create airplane performance databases and may provide specialized training courses to customers to assist them in their understanding and use of the airplane and documents listed above.  Such courses may include:
    • Performance Engineers course
    • Weight & Balance course

  • Review and approve requests from airlines for non-normal operations such as flight with missing secondary structure
  • Respond to Flight Operations related Customer Service Requests.  Utilize the Safety Process for emergent Flight Operations related Safety issues.
  • Prepare and Release Flight Operations Bulletins.  MITAC must define both a Routine bulletin type as well as an Alert bulletin type to correspond to the Maintenance related Service Bulletins
  • Define a change process that addresses Flight Operations related changes that may impact the certification basis of the airplane (e.g. Airplane Flight Manual)

Expected Education/Experience and Skills:



  1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
  2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in managerial positions providing Training and/or Flight Operations management functions to commercial airline customers.
  3. Commercial pilots license preferred.
  4. Candidates must have skills and experience managing Partners and Suppliers.

 
Job Number: 1710068573
Job Location: Nagoya,
Duration: 36 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JqSMAA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Doors Design Engineer

Description:
General Summary:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
  • Generates Engineering Models and Drawings utilizing CATIA Version 5
  • Performs trade studies to identify optimal engineering solution
  • Collaborates with the Integrated Product Team to resolve cross functional issues
  • Reviews work performed by others and ensure work is to the highest standard
  • Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
  • Have the ability to understand and apply certification requirements
  • Implement design solutions optimized for cost and weight
  • Manages task execution to ensure on-time and on-target completion.
  • Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality
  • Searches for problem root cause and develop corrective action plans and solutions
  • Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones
  • Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience

    Education, Work Experience, Certification and/or Licensure:
    BS in Mechanical Engineering with 10-15 years directly related experience
  • OR MS / MBA with 8-13 years of experience
  • OR 18-23 years directly related experience
  • Some Travel may be required

    Knowledge, Skills and Abilities:
  • Proficient in use of CATIA Version 5
  • Advanced knowledge of drafting rules
  • Advanced knowledge of Geometrical Dimensioning and Tolerancing
  • Proficient in Microsoft Office Products
  • Use of Team Center
  • Familiar with FAR Part 23 or Part 25
  • Functional knowledge of SAP
     
  • Job Number: 28-010
    Job Location: Greensboro, NC
    Rate: $50 - $65/hr.
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 06/14/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    Electric System Component Outfitting Interface Engineer

    Description:
    This position is located in Nagoya, Japan.

    Electric system component outfitting interface engineer
    • Mechanical/ structural interface engineering expertise
    • Willing to be a leading engineer rather than just a manager or an advisor

    • 10+ years experience 
    • Bachelors Degree in Engineering
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610044922
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ryan Bushey
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i5000000037FjAAI&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Engineer

    Description:
    Electrical Design Engineer
    JOB SUMMARY:
    The Electrical Design Engineer Reports to the Engineering Manager, The Electrical Design Engineer performs complex assignments often requiring development of new or improved products/processes/techniques. Assesses feasibility and soundness of proposed engineering tests/products/equipment. The position requires an ability to interpret, on a broad basis, the principles, theories, and concepts of an engineering specialty.
    PRIMARY DUTIES & RESPONSIBILITIES:
    • Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements
    • Reviews project-related documentation to ensure its accuracy
    • Coordinates project activities with other operating or engineering units to facilitate participation of appropriate staff in project completion
    • Defining the installation requirements of electrical systems and components
    • Creating wiring diagrams for interior monument cabin furnished equipment
    • Creating and designing interior cabin furnished monument Electrical drawings and 3D models
    • Performing electrical load analysis for interior monuments
    • Ensuring compliance of design to latest customer and airworthiness requirements
    • Checking of engineering data produced by peers
    • Participating in design reviews of electrical installations for interior monuments
    • The selection and application of materials and processes appropriate to each design element
    • Ensuring the successful integration of each design element with the product as a whole
    • Supporting Mechanical Design Engineers within the group with guidance on electrical issues
    • Supporting problem solving during manufacturing build process and through aftermarket queries
    • Customer support
    • Assisting in definition and supplier selection for components and equipment
    • Ensuring technical, commercial and weight targets are maintained
    • Communicating effectively and professionally with peers, suppliers and customers
    • Development and introduction of product improvements
    MINIMUM REQUIREMENTS:
    • Bachelor’s degree (BA/BS) from a four-year college or university. Minimum of five years related experience and/or training; or equivalent combination of education and experience.
    PREFERRED QUALIFICATIONS:
    • Competent user of the incumbent CAD and data management systems – Team center and NX
    Aircraft interiors experience.
     
    Job Location: Everett, WA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 08/14/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Systems Engineer (DER preferred)

    Description:
    Electrical Systems Engineer
    Location: Idaho
    Duration: 6 months +
    Rate: Open

    Job Summary
    Electrical Engineer (DER Preferred)
    Desired Skills
    Radio and Avionic installation and integration.
    Job Description:
    Electrical Systems Engineer
    We are seeking an Electrical Engineer. This position will report to the Type Design Engineering Manager and will
    be responsible for developing processes, solving problems, and making improvements across various systems (Electrical, Avionics,
    Environmental Controls, Flight Controls, Mechanical Systems, etc).
    Essential Duties and Responsibilities (other duties may be assigned):
     Design and develop products, tools and or systems.
     Research and implement solutions for design improvements and part obsolescence.
     Perform testing to validate designs.
     Complete design and drawing changes with engineering substantiations.
     Prepare requirements, specifications, and assist with the development of processes.
     Prepare certification documentation, reports, procedures and tests.
     Develop, document, and integrate engineering principles, lean manufacturing techniques, and standard operating
    procedure into the engineering culture.
     Develop designs using Design for Manufacturing (DFM) and Lean Manufacturing principles.
     Plan, schedule, conduct, or coordinate detailed phases of engineering projects in a part of a major project or in a total
    project of moderate scope.
     Perform work which involves conventional engineering practice but may include a variety of complex features such as
    conflicting design requirements, unsuitability of standard materials, and difficult coordination requirements.
     Provides technical solutions to a wide range of difficult problems. Solutions are imaginative, thorough, practicable, and
    consistent with organizational objectives.
    Position Requirements:
     Bachelor's degree and 5 to 7 years engineering experience in the aerospace industry.
     The ability to work independently as well as lead a small team of peers.
     CAD and MS Office Suite proficiency.
     NX experience preferred.
     Experience in bench and the flight testing environments preferred.
     Familiarity with 14 CFR Part 23 regulations required.
    The Structures Company is an AA/EOE.
     
    Job Location: Idaho, ID
    Per Diem: yes
    Overtime: possible
    Duration: 6 mos +
    Start Date: asap
    Input Date: 06/16/2017
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Mark Sharp
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    Electrical Technician

    Description:
    One year in length
    Maximum Hourly pay rate $18.00
    Tests and troubleshoots electronic products using standard and specialized test equipment. 

    1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
    2. Sets up test equipment and tests electronic products using established test procedures and schematics
    3. Provides technical guidance to assemblers and re-work assemblers 
    4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

    5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
    6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
    7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
    8. Recommends and/or proposes process improvements 
    8. Ensures that all relevant quality information/feedback is provided 
    10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
    11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
    12. Keeps workstation, tools and equipment in a neat and orderly manner 
    13. Understands and complies with all Company, safety rules and regulations

    Requirements/Knowledge: 

    v Education Required:
    o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

    v Experience 
    o 1-3 years of electronics related experience

    v Skill Level Required: 
    o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

    o Should have a high level of electrical and mechanical aptitude and analytical skills
    o Ability to interpret drawing and specifications
    o Basic computer skills
    o Knowledge of manufacturing processes and how to effectively troubleshoot problems
    o Should possess dexterity skills, good hand & eye coordination 
    o Willing and able to take and pass basic electronics test 

    Desired Qualifications:

    v Past experience in a manufacturing environment
    v Past experience in a self-directed teaming environment
    v Lean manufacturing knowledge
    v Understanding of IPC-A-610 standards
     

     
    Job Number: 1710063131
    Job Location: Bohemia, NY
    Duration: 12 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Eric Khassanov
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical/Mechanical Engineering Contractor

    Description:
    UNIQUE SKILLS
    Ideal Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to: - 3D wire routing - EWIS - Cabin Management System - Cabin Entertainment System - Cabin Lighting - Cabin Switch Controls - Telephone System - Satellite communications - Water System - Waste System - Cabin interior monuments - Seats Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.

    ESSENTIAL FUNCTIONS
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area.

    OTHER REQUIREMENTS
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 17-725-102177
    Job Location: Southeast
    Rate: $58.00 to $63.00/per hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 10/17/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    Electro-Mechanical Assembler

    Description:

    Job Description
    Perform hand and/ or machine assembly which may include one or more of the following:
    • Operating automated machinery
    • Presses
    • Component identification
    • Soldering
    • Testing and Packaging using small tools and equipment in a teamwork environment
       

    Essential Duties and Responsibilities include the following. Other duties may be assigned.

    • Assemble in compliance with IPC standards including basic soldering (through hole, point to point) .
    • Internal / external customer satisfaction .
    • Operate test equipment and analyze test data .
    • Component identification .
    • Operating small tools/equipment .
    • Verify correct documentation (process sheets, drawings, etc.) .
    • 5S
    • Safety and housekeeping.
    • Overtime as required .
    • Training as required for the position and
    • Assist with the training of new associates in standard manufacturing practices.

     
    Qualifications
    The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

    • Strong communications skills .
    • Reading comprehension .
    • Basic math and computer skills .
    • Manual dexterity .
    • Ability to support / lead within a team environment .
    • May be required to properly lift up to 35 pounds maximum.
    • If an employee needs to lift over 35 pounds, it needs to be done with two employees lifting or needs to be reported to EHS to determine what can be done for a lifting aid.

     
    Desired Characteristics The following skills may be required depending on the MFG Assembly Operations work location within the plant.
     
    • Soldering
    • Desoldering and
    • Repair of visual errors

     
    Education and/or Experience

    • High School Diploma or
    • General Education Degree (GED).

     
     
    First and Second Shifts available
     

     
    Job Number: 1710067030
    Job Location: Lincolnton, NC
    Duration: 6 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chris O\'Connor
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021mFuAAI&URLSource=cjhunter

    Electro-Mechanical Design Engineer

    Description:
    Electro-Mechanical Design Engineer
    PDS is looking for experienced Electro-Mechanical Engineers in the Los Angeles area
    Duties
    Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

    Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

    Research, development and design of components, equipment and networks for military applications.

    Basic Qualifications

    - Must be able to obtain a security clearance 
    - Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
    - 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

    Desired skills

    - Working knowledge of harness design and development.
    - Working knowledge of printed wiring board and surface mount technologies is desired.
    - Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
    - Working knowledge of military hardware specifications is desired.
    - Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

     

     



     
    Job Number: 1710065207
    Job Location: Los Angeles, CA
    Duration: 12 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Karla Pelonis
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJcAAM&URLSource=cjhunter

    Electro-Mechanical Design Engineer

    Description:
    Electro-Mechanical Design Engineer
    PDS is looking for experienced Electro-Mechanical Engineers in the Phoenix area
    Duties
    Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

    Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

    Research, development and design of components, equipment and networks for military applications.

    Basic Qualifications

    - Must be able to obtain a security clearance 
    - Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
    - 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

    Desired skills

    - Working knowledge of harness design and development.
    - Working knowledge of printed wiring board and surface mount technologies is desired.
    - Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
    - Working knowledge of military hardware specifications is desired.
    - Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

     

     



     
    Job Number: 1710065209
    Job Location: Phoenix, AZ
    Duration: 12 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: David Goodman
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJmAAM&URLSource=cjhunter

    Electro-Mechanical Design Engineer

    Description:
    Electro-Mechanical Design Engineer
    PDS is looking for experienced Electro-Mechanical Engineers in the Houston area
    Duties
    Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

    Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

    Research, development and design of components, equipment and networks for military applications.

    Basic Qualifications

    - Must be able to obtain a security clearance 
    - Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
    - 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

    Desired skills

    - Working knowledge of harness design and development.
    - Working knowledge of printed wiring board and surface mount technologies is desired.
    - Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
    - Working knowledge of military hardware specifications is desired.
    - Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

     

     



     
    Job Number: 1710065208
    Job Location: Houston, TX
    Duration: 12 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: David Goodman
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJhAAM&URLSource=cjhunter

    Electro-Mechanical Design Engineer

    Description:
    Electro-Mechanical Design Engineer
    PDS is looking for experienced Electro-Mechanical Engineers in the San Jose area
    Duties
    Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

    Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

    Research, development and design of components, equipment and networks for military applications.

    Basic Qualifications

    - Must be able to obtain a security clearance 
    - Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
    - 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

    Desired skills

    - Working knowledge of harness design and development.
    - Working knowledge of printed wiring board and surface mount technologies is desired.
    - Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
    - Working knowledge of military hardware specifications is desired.
    - Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

     

     



     
    Job Number: 1710065206
    Job Location: San Jose, CA
    Duration: 12 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Karla Pelonis
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJXAA2&URLSource=cjhunter

    Electro-Mechanical Design Engineer

    Description:
    Electro-Mechanical Design Engineer
    PDS is looking for experienced Electro-Mechanical Engineers in the San Diego area
    Duties
    Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

    Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

    Research, development and design of components, equipment and networks for military applications.

    Basic Qualifications

    - Must be able to obtain a security clearance 
    - Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
    - 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

    Desired skills

    - Working knowledge of harness design and development.
    - Working knowledge of printed wiring board and surface mount technologies is desired.
    - Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
    - Working knowledge of military hardware specifications is desired.
    - Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

     

     



     
    Job Number: 1710065205
    Job Location: San Diego, CA
    Duration: 12 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Karla Pelonis
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJIAA2&URLSource=cjhunter

    Electronic Assemblers Needed in Redmond, WA

    Description:
    PDS Tech has an immediate need to fill several Electronic Assembler positions in Redmond, WA.  If you are skilled at electronic assembly, please apply today. 
     
    Some of your responsibilities as an Assembler will include:
    • Assemble fabricated parts at floor stations. 
    • Test and calibrate parts and mechanisms to meet tolerances and product specifications. 
    • Use hand tools and power tools to assemble units according to product specifications.
    • Identify units that fail tests or tolerance levels and repair as necessary.
    • Specific tools used will be tweezers, vacuum wands and torque drivers.


    These positions are contract to hire, based on individual work performance, attendance/dependability, and business needs.

    All shifts are available.

      


     
    Requirements:
    • Experience working with microscope and microscopic components.
    • Soldering skills and experience.
    • Basic computer skills.
    • High school diploma or its equivalent.
    • US citizen or permanent resident.
    • English language comprehension and communication abilities.

     
    Job Number: 1510015749
    Job Location: Redmond, WA
    Duration: 6 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000007iU8AAI&URLSource=cjhunter

    Electronic Troubleshooter

    Description:
    Tests and troubleshoots electronic products using standard and specialized test equipment. 

    1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
    2. Sets up test equipment and tests electronic products using established test procedures and schematics
    3. Provides technical guidance to assemblers and re-work assemblers 
    4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

    5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
    6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
    7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
    8. Recommends and/or proposes process improvements 
    8. Ensures that all relevant quality information/feedback is provided 
    10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
    11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
    12. Keeps workstation, tools and equipment in a neat and orderly manner 
    13. Understands and complies with all Company, safety rules and regulations

    Requirements/Knowledge: 

    v Education Required:
    o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

    v Experience 
    o 1-3 years of electronics related experience

    v Skill Level Required: 
    o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

    o Should have a high level of electrical and mechanical aptitude and analytical skills
    o Ability to interpret drawing and specifications
    o Basic computer skills
    o Knowledge of manufacturing processes and how to effectively troubleshoot problems
    o Should possess dexterity skills, good hand & eye coordination 
    o Willing and able to take and pass basic electronics test 

    Desired Qualifications:

    v Past experience in a manufacturing environment
    v Past experience in a self-directed teaming environment
    v Lean manufacturing knowledge
    v Understanding of IPC-A-610 standards
     
    Tests and troubleshoots electronic products using standard and specialized test equipment. 

    1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
    2. Sets up test equipment and tests electronic products using established test procedures and schematics
    3. Provides technical guidance to assemblers and re-work assemblers 
    4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

    5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
    6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
    7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
    8. Recommends and/or proposes process improvements 
    8. Ensures that all relevant quality information/feedback is provided 
    10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
    11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
    12. Keeps workstation, tools and equipment in a neat and orderly manner 
    13. Understands and complies with all Company, safety rules and regulations

    Requirements/Knowledge: 

    v Education Required:
    o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

    v Experience 
    o 1-3 years of electronics related experience

    v Skill Level Required: 
    o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

    o Should have a high level of electrical and mechanical aptitude and analytical skills
    o Ability to interpret drawing and specifications
    o Basic computer skills
    o Knowledge of manufacturing processes and how to effectively troubleshoot problems
    o Should possess dexterity skills, good hand & eye coordination 
    o Willing and able to take and pass basic electronics test 

    Desired Qualifications:

    v Past experience in a manufacturing environment
    v Past experience in a self-directed teaming environment
    v Lean manufacturing knowledge
    v Understanding of IPC-A-610 standards
     
     
    Job Number: 1710066458
    Job Location: Bohemia, NY
    Duration: 12 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Eric Khassanov
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded Software Engineer - Level 2

    Description:
    Embedded Software Engineer - Level 2

    Location: Grand Prairie, TX
    Pay Rate: DOE ($65/hr - $80.73/hr)
    Duration: 1 year contract
    Shift: First, 9/80
    Travel: Yes, to customer locations as required
    ** MUST have an ACTIVE SECRET CLEARANCE **

    Description
    -Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
    -Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
    -Interfaces with customers, suppliers, application users, and other technical and support personnel.
    -Must have Secret clearance.

    Skill/Experience/Education (Mandatory):
    -DOD Secret Clearance Required (Must have active/transferable Secret Clearance) (4-5 Years experience)
    -BS in Computer/Software Engineering, Computer Science, or Related Field (4-5 Years experience)
    -C/C++ (4-5 Years experience)
    -COTS SBC (0-3 Years experience)
    -Linux (Red Hat) (4-5 Years experience)
    -VxWorks (4-5 Years experience)
    -Git (4-5 Years experience)
    -J1939 or CANBus experience (4-5 Years experience)
    -Eclipse (4-5 Years experience)
    -Embedded SW Engineering (4-5 Years experience)
    -Ground Vehicles and Autonomy Experience (4-5 Years experience)

    Desired:
    -Driver Development (0-3 Years experience)
    -Python (0-3 Years experience)
    -ROS (0-3 Years experience)
    -CODESYS (0-3 Years experience)
     
    Job Number: 7297
    Job Location: Grand Prairie, TX
    Rate: 65.00-80.73
    Per Diem: Split Possible
    Overtime: No
    Duration: 1 year
    Start Date: ASAP
    Input Date: 07/19/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded Software Engineer - Level 2

    Description:
    Embedded Software Engineer - Level 2

    Location: Grand Prairie, TX
    Pay Rate: DOE ($65/hr - $80.73/hr)
    Duration: 1 year contract
    Shift: First, 9/80
    Travel: Yes, to customer locations as required
    ** MUST have an ACTIVE SECRET CLEARANCE **

    Description
    -Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
    -Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
    -Interfaces with customers, suppliers, application users, and other technical and support personnel.
    -Must have Secret clearance.

    Skill/Experience/Education (Mandatory):
    -US DOD Secret Clearance Required (4-5 years experience)
    -BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
    -C/C++ (4-5 years experience)
    -Linux (Red Hat) (4-5 years experience)
    -Embedded SW Engineering (4-5 years experience)

    Desired:
    -Razor (CM Control)
    -Domain Knowledge of Air and Missile Defense
    -Seeker Programming and/or Integration
    -Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT)
     
    Job Number: 7295
    Job Location: Grand Prairie, TX
    Rate: 65.00-80.73
    Per Diem: Split Possible
    Overtime: No
    Duration: 1 year
    Start Date: ASAP
    Input Date: 10/12/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded Software Engineer - Level 2

    Description:
    Embedded Software Engineer - Level 2

    Location: Grand Prairie, TX
    Pay Rate: DOE ($65/hr - $80.73/hr)
    Duration: 1 year contract
    Shift: First, 9/80
    Travel: Yes, to customer locations as required
    ** MUST have an ACTIVE SECRET CLEARANCE **

    Description
    -Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
    -Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
    -Interfaces with customers, suppliers, application users, and other technical and support personnel.
    -Must have Secret clearance.

    Skill/Experience/Education (Mandatory):
    -DOD Secret Clearance Required (Must have active/transferable Secret Clearance) (4-5 Years experience)
    -BS in Computer/Software Engineering, Computer Science, or Related Field (4-5 Years experience)
    -Modern C/C++ (4-5 Years experience)
    -Agile Product Development (4-5 Years experience)
    -Linux (Red Hat) (4-5 Years experience)
    -Boost Libraries (4-5 Years experience)
    -Web Services (SOAP/REST) (4-5 Years experience)
    -Jenkins (4-5 Years experience)
    -Continuous Integration (4-5 Years experience)
    -Qt Application Framework (0-3 Years experience)

    Desired:
    -Domain Knowledge of Air and Missile Defense (0-3 years experience)
     
    Job Number: 7298
    Job Location: Grand Prairie, TX
    Rate: 65.00-80.73
    Per Diem: Split Possible
    Overtime: No
    Duration: 1 year
    Start Date: ASAP
    Input Date: 09/07/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded Software Engineer Level 2 with active secret TX

    Description:
    Lockheed Martin MFC 1368
    Recruiter to Contact:
    Job Title: Embedded Software Engineer Level 2
    Job Number: 159149/1368
    Location: Grand Prairie, TX
    Compensation: 80/hr
    Assignment Length: 12 month contract
    Security Clearance Active Secret
    Exempt

    Description:


    Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.

    Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel.

    Must have active / transferable Secret Clearance prior to submittal and shown on resume.

    Skill/Experience/Education
    Mandatory:

    US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, Modern C/C++, Agile Product Development, Linux (Red Hat), Boost Libraries, Web Services (SOAP/REST),Jenkins , Continuous Integration, Qt Application Framework

    Desired:

    Domain Knowledge of Air and Missile Defense


    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    US DOD Secret Clearance Required 4-5 Years Yes
    BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
    Modern C/C++ 4-5 Years Yes
    Agile Product Development 4-5 Years Yes
    Linux (Red Hat) 4-5 Years Yes
    Domain Knowledge of Air and Missile Defense 4-5 Years No
    Boost Libraries 4-5 Years Yes
    Web Services (SOAP/REST) 4-5 Years Yes
    Jenkins 4-5 Years Yes
    Continuous Integration 4-5 Years Yes
    Qt Application Framework 0-3 Years Yes
     
    Job Number: DW-0368
    Job Location: Grand Prairie, TX
    Rate: 80/hr max
    Duration: 12 month contract
    Input Date: 06/23/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Emergency Electric Power Generation Integration Engineer

    Description:
    This position is located in Nagoya, Japan.

    Emergency electric power generation integration engineer
    • RAT hardware interface with aircraft expertise
    • Mechanical/ structural interface engineering expertise
    • Hydraulic system knowledge
    • Capability to review stress analysis by supplier/ partner
    • Willing to be a leading engineer rather than just a manager or an advisor

    • 10+ years experience 
    • Bachelors Degree in Engineering
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610044923
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i5000000037FoAAI&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer Mechanical Design - 5 with active secret / NX FL

    Description:
    1582
    Engineer Mechanical - 5 (Job Number: 17007853)

    Number of Openings: 1

    Location(s): United States-Florida-Melbourne

    Shift: 1st Shift

    Target Start Date: Jun 5, 2017

    Subsystem Design Engineer -5 (multiple openings)

    Rate: $70/hr.

    Work Week: 9/80

    Duration: 1 year

    Active Secret clearance required to start


    The candidate must have a DoD Secret Clearance that has been established or renewed within the last 6 years. Final offers are contingent upon SAP award.

    Utilizing Siemens NX 10, the candidate will be responsible for designing detail parts, assemblies and installations associated with fixed-wing aircraft ECS, Fuel, Fire protection, Secondary Power, Electrical subsystems, mechanisms and Hydraulics subsystems.

    Responsible for the development and integration of various aircraft ECS components including ducts, manifolds, plenums.

    Responsible for the development and integration of aircraft fuel and hydraulic system components including valves, filters, reservoirs, mechanical lines, machined and sheetmetal detail parts.


    Basic Qualifications:

    14 Years with Bachelors in Science; 12 Years with Masters; 9 Years with PhD or equivalent years of experience and education.


    Preferred Qualifications:

    Siemens NX or Teamcenter experience.
     
    Job Number: MB-17007853
    Job Location: Melbourne, FL
    Rate: 70/hr max
    Duration: 12 month contract
    Input Date: 07/12/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Contractor Design Engineer

    Description:
    UNIQUE SKILLS
    Design Engineer/Mechanical Engineer for Aircraft Cabin Interiors in Completions • Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft. • Examples of experiences should include, but are not limited to: -Custom Cabinetry (galleys, lavatories, vanities, closets, storage compartments) -Interior peripheries (cabin liners, window panels, passenger service units (PSUs), dado panels, and side ledges) -Electrical installations & equipment (wire routings, lighting, passenger entertainment equipment, galley service units) -Miscellaneous (water/waste systems, oxygen systems, seating) • The design engineer will design and build models and prints demonstrating a complete understanding of construction methodologies required for component parts and assemblies to an end item level. • The design engineer must understand and demonstrate knowledge of the product development process from concept to production and through sustaining. • The design engineer will design installations for the aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight and Center of Gravity Analysis. • Experience with Part 25 aircraft and some familiarity with Part 135 requirements. • Engineering design work includes the creation of drawings/models using either CATIA V5 or AutoCAD interconnected with SmarTeam. • The design engineer will be required to liaison with Operations, Suppliers, Procurement, Quality, and other departments engineering issues relating to design and validation through prototyping and reliability testing. • The design engineer's assignments will include assembly/installation, similarity, mounting, and functionality analysis with each configuration developed along with any other requirements necessary to product development. • The design engineer will employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements. • The design engineer will be proficient in creating and maintaining a project schedule for each assigned project. • Additional responsibilities are outlined in the job description and as assigned. • Other preferred skills: Microsoft Word, Excel, MS Project, and Power Point.

    EDUCATION AND EXPERIENCE REQUIREMENTS
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.

    POSITION PURPOSE
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    ADDITIONAL FUNCTIONS
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 17-737-104961
    Job Location: Southeast
    Rate: $50.00 to $60.00/per hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 07/13/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    Engineering Design 1/2 (3) - FL - C

    Description:
    RESPONSIBILTIES:
    Designs major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations. Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal. Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost. Coordinates with other organizations affected by design development. Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures. Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning. Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers.
    Design Engineer: Work will involve aerospace mechanical, pneumatic, hydraulic, and electrical subsystem test equipment design.

    REQUIRED EXPERIENCE:
    Strong CAD skills, proficient in MS Office, must be willing to relocate to Palmdale in approx. 1-2 years.
    Level 1 (2 positions): 0 Years with Bachelors in Science Mechanical Engineering
    Level 2 (1 Position): 2 Years with Bachelors in Science Mechanical Engineering; 0 Years with Masters Mechanical Engineering.
    Preferred Qualifications:
    Knowledge of test equipment design a plus, knowledge of aerospace subsystems a plus.

    EDUCATION:
    Bachelors in Science Mechanical Engineering, or Master's degree.

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

    HOURS:
    9/80 workweek

     
    Job Number: 162898
    Job Location: Melbourne, FL
    Rate: $28 to $40.00 DOE
    Duration: 9-12 months
    Input Date: 01/21/2018
    Firm Name: CHIPTON ROSS
    Attention: Melody Mullins
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: mmullins@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

    Description:
    Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

    Location: Orlando, FL
    Duration: 1 year contract
    Pay Rate: $65/hr - $75/hr (DOE)
    Shift: 1st, 9/80
    **Must have an Active Secret Clearance**


    Job Description:
    -Mechanical Structures / Dynamics Engineer: Perform stress analysis for flight structures and ground test support equipment’s.
    -Course work and stress analysis experience must include classical hand analysis as well as finite element analysis methods.
    -Job duties may encompass buckling analysis; linear and non-linear stress analysis; composite analysis and mechanism.
    -Candidate should be highly skilled in finite element modeling and analysis, with expertise in the use of FEM, Nastran, NX or BETACAE preferred.
    -Experience with high velocity impact analysis or flight test random vibration data reduction is a plus.
    -Requires good verbal and written communication skills, and ability to work in a team environment.
    -Candidate will be required to support designers in determining parts with adequate margins of safety, good load paths, low weight, and high producibility.
    -Job duties may also require support to structural test definition, requirements, monitoring, data reduction, and comparison to analysis.


    Mandatory Skills:
    -Bachelor’s degree from and accredited college in a related discipline, or equivalent experience/combined education, with 8 years of professional experience; or 6 years’ experience with a related Master’s degree.


    Desired Skills:
    -Mechanical Engineering degree, FEM, NASTRAN, NX or BETCAE skills
    -PRO E and/or CATIA skills
     
    Job Number: 7019
    Job Location: Orlando, FL
    Rate: 65.00-75.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 12/20/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Finite Element Analysis (FEA) / Finite Element Method (FEM) Mechanical Engineer - Level 3 with active secret FL

    Description:
    1286
    Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3
    Orlando FL
    Active secret required
    75/hr max
    12 month contract

    Description
    Mechanical Structures / Dynamics Engineer: Perform stress analysis for flight structures and ground test support equipment’s. Course work and stress analysis experience must include classical hand analysis as well as finite element analysis methods. Job duties may encompass buckling analysis; linear and non-linear stress analysis; composite analysis and mechanism. Candidate should be highly skilled in finite element modeling and analysis, with expertise in the use of FEM, Nastran, NX or BETACAE preferred. Experience with high velocity impact analysis or flight test random vibration data reduction is a plus. Requires good verbal and written communication skills, and ability to work in a team environment. Candidate will be required to support designers in determining parts with adequate margins of safety, good load paths, low weight, and high producibility. Job duties may also require support to structural test definition, requirements, monitoring, data reduction, and comparison to analysis.

    Skill/Experience/Education

    Mandatory:

    Bachelor’s degree from and accredited college in a related discipline, or equivalent experience/combined education, with 8 years of professional experience; or 6 years’ experience with a related Master’s degree.

    Desired:

    Mechanical Engineering degree, FEM, NASTRAN, NX or BETCAE skills
    PRO E and/or CATIA skills
     
    Job Number: JE-1286
    Job Location: Orlando, FL
    Rate: 75/hr max
    Duration: 12 month contract
    Input Date: 10/17/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Controls Engineer

    Description:
    Position Roles & Responsibilities:
    1. Create Catia V5 hydraulic and mechanical flight control layouts, installations, assemblies, details.
    2. Create, release, revise Catia V5 engineering detail, assembly, installation drawings and bill of materials using Enovia Matrix, LCA.

    3. Work closely with various design groups to coordinate designs and establish aircraft interfaces.
    4. Work closely with aircraft final assembly shop personnel.
    5. Work closely with various suppliers.

    Experience Required:
    - Minimum of a BS in Engineering Design required
    - High level communications skills both written and oral.
    - In-depth knowledge of Catia V5, Enovia Matrix and LCA functionality.
    - Experience with Catia V5 Tubing function.
     
    Job Number: 38503
    Job Location: Stratford, CT
    Duration: 15 months
    Start Date: ASAP
    Input Date: 06/15/2017
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Rick Nussbaum
    Address: 1700 WELLS RD STE 1
    City, State: ORANGE PARK, FL 32073-2373
    Phone: 904/562-3215
    800 Phone: 866/277-3343
    Fax Phone: 904/713-2000
    Website: www.apollopros.com

    Flight Controls Engineer

    Description:
    PDS Tech is seeking a Flight Controls Engineer for an open position in Nagoya, Japan.

     
    •  
    • B.S. degree in Aerospace Engineering, Mechanical Engineering or related technical degree.
    • Applicable coursework or coop/intern experience to this position desired.
    • Working knowledge of generic CAD design tool processes is desired.
    • Experience with CATIA V6/Enovia – or ability to learn it quickly from V5
    • Experience with Kinematics in CATIA
    • Flight Controls Systems design experience a plus
    • Must have excellent verbal communication and presentation skills.
    • Proficient with Microsoft Office applications including Word and Excel.
    • Professional demeanor, troubleshooting and organizational skills are necessary.
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610045561
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chad Dunavant
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000003BKTAA2&URLSource=cjhunter

    Flight Readiness Technician-SECRET

    Description:
    PDS Tech is seeking a Flight Readiness Technician for an open position in Palmdale, CA.

    In your role, you will:

    • Inspector Aircraft, Mechanic Electrical and Electronics, and Mechanic Flight.
    • Perform operational checkout of aircraft prior to and during preflight.
    • Inspect explosive and armament installations.
    • Maintain aircraft historical records.
    • Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft.
    • Inspect and/or perform bench and flight line operational checkout and inspect, trouble-shooting, adjustment and repair of electrical and electronic systems.
    • Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed.
    • Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting,adjustment and repair of any electrical or electronic system.
    • Fabricate, adjust, trouble shoot, repair and modify electronic test equipment.
    • Perform operational checkout of hydraulic systems and mechanical systems.
    • Diagnose and correct hydraulic and mechanical malfunctions.
    • Operate engines during run-ups and troubleshoot when needed.
    • Perform engine buildup as assigned. Install, repair, and replace tanks, power plants, generators, and aircraft engines.
    • Install or replace reservoirs, etc. and repair leaks in same.
    • Install or replace instruments such as fuel quantity, rate of climb and oil pressure indicators.
    • Splice, route, clamp, solder, and string tie wires or wire bundles.
    • Repair, install and hook up bomb, missile and rocket racks and pylons.
    • Install and load ejection seats and guns.
    • Install adjust, repair and replace structural parts and assemblies.
    • Modify parts such as skins, doors, aircraft frames, test panels, clips, brackets, angles and ribs without the aid of jigs and ixtures.
    • Modify aircraft components or aircraft support equipment.
    • Perform composite repairs
    • Must have Secret Clearance with the ability to obtain a Top Secret.

    As our ideal candidate, you will meet the following requirements:
    • Specialized vocational training, or an Associate's degree and 3 to 5 years work related F15 experience or an equivalent combination of education and experience.
    • Knowledgeable and skilled in F15 mechanical, structural, power plant, hydraulic, pneumatic, and electrical systems operation and flightline methods and common shop practices.
    • Knowledgeable and able to interpret and work from USAF technical orders (T.O.s), blueprints, sketches and written and verbal instructions.
    • Knowledgeable and able to use computer systems for office and shop applications.
    • Knowledgeable about and able to work in FOD controlled environments.
    • Knowledgeable and able to apply shop math.
    • Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
    • Able to complete and maintain all required training and certifications needed to do your job efficiently.
    • Able to climb, stand, bend, kneel, reach, crawl, and walk on or around aircraft or work stands and in confined spaces.
    • Must have Secret Clearance with the ability to obtain a Top Secret.

     
    Job Number: 1610061554
    Job Location: Palmdale, CA
    Per Diem: No
    Duration: 12 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Enrique Perez
    Address: 3201 CHERRY RIDGE DR STE A103
    City, State: SAN ANTONIO, TX 78230-4824
    Phone: 210/524-1496
    800 Phone: 866/570-1503
    Email: cecjsanantonio@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G32jAAC&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Sciences Engineer-Stability & Control

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.

    Seeking multiple contract or fulltime Flight Sciences Engineers to join the teams in Seattle and Moses Lake with at least five years’ experience in flight sciences, including:

    Stability & Control
    Aircraft Performance
    6DOF Flight Simulation
    Essential functions:

    Define and validate flight test specifications
    Perform data review and analysis for verification of aircraft level requirements
    Utilize flight simulation models and data
    Support ground and flight test activities
    Prepare flight test reports
    Desired Qualifications:

    Flight Sciences Engineer with experience with FAA Part 25 or Part 23 aircraft certification
    Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    Ability to represent the client professionally and positively during client interactions and meetings.
    Bachelor or advanced degree in Aerospace Engineering.
    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: Yes
    Duration: lt
    Start Date: asap
    Input Date: 07/26/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

    We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

    Essential Functions:
    Coordinate test and certification requirements.
    Author flight test and ground test plans including test hazard analysis.
    Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
    Support instrumentation installation as required.
    Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
    Support flight and ground test conduct and data collection.
    Analyze test data and evaluate compliance with regulations.
    Prepare certification test reports.
    Domestic and occasional international travel is required.
    Desired Qualifications:

    5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
    Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
    Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
    Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
    Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
    Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
     
    Job Location: Moses Lake, WA
    Per Diem: possible
    Overtime: Yes
    Duration: LT
    Start Date: asap
    Input Date: 12/07/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    UNIQUE SKILLS
    Experience either conducting, functioning as an on board flight analyst, or telemetry during experimental fixed wing aircraft flight testing in any of the following fields: Avionics, Powerplant/Mechanical Systems, Performance/Stability & Control. Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan. Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

    ESSENTIAL FUNCTIONS
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    ADDITIONAL FUNCTIONS
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 17-656-89922
    Job Location: Southeast
    Rate: $56.00-$67.00/per hour
    Per Diem: Yes
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 07/13/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Unique Skills:
    Experience either conducting, functioning as an on board flight analyst, or telemetry during experimental fixed wing aircraft flight testing in any of the following fields: Avionics, Powerplant/Mechanical Systems, Performance/Stability & Control. Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan. Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects.
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Education/Experience
    Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 24-156
    Job Location: Savannah, GA
    Rate: $56-$67/hr.
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 11/14/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Flight Test Engineer

    Location: Savannah, GA
    Pay Rate: $56/hr - $67/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    -Experience either conducting, functioning as an on board flight analyst, or telemetry during experimental fixed wing aircraft flight testing in any of the following fields: Avionics, Powerplant/Mechanical Systems, Performance/Stability & Control.
    -Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan.
    -Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    Other Requirements:
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6952
    Job Location: Savannah, CA
    Rate: 56-67
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 10/03/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Mechanical Design Engineer

    Description:
    Flight Test Mechanical Design Engineer (TS II)

    Location: Savannah, GA
    Pay Rate: $56/hr - $67/hr
    Duration: Long Term Contract
    Shift: Weekend 1st shift
    Schedule: 4x10, Friday - Monday

    Unique Skills:
    The Flight Test Mechanical Design Engineer (Tech Spec II) will be responsible for:
    - Reviewing defects, establish root causes and providing dispositions to repair the discrepant condition using engineering best practices.
    - Ensuring the proposed repair is equivalent to the Blueprint design and that it will not affect system functionality.
    - Acting as the single point of contact for Mechanical Design and Flight Test MRB to supports Operations during the weekend shift to maintain aircraft availability.

    Required Qualifications:
    - Strong working knowledge of Flight Test Instrumentation Mechanical Design.
    - Strong working knowledge of Flight Test Aircraft Systems.
    - Working knowledge of CATIA V5, SmarTeam, and Solumina.
    - Must be able to work the weekend shift (4x10 schedule: Friday - Monday).

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services.

    Principle Duties and Responsibilities/Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works under minimal direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 7451
    Job Location: Savannah, GA
    Rate: 56-67
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 07/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Mechanical Design Engineer

    Description:
    The Flight Test Mechanical Design Engineer will be responsible for reviewing defects, establish root causes and providing dispositions to repair the discrepant condition using engineering best practices. - Ensuring that the proposed repair is equivalent to the Blueprint design and that it will not affect system functionality. - Acting as the single point of contact for Mechanical Design and Flight Test MRB to supports Operations during the weekend shift to maintain aircraft availability. The following qualifications are required for this role: - Strong working knowledge of Flight Test Instrumentation Mechanical Design. - Strong working knowledge of Flight Test Aircraft Systems. - Working knowledge of CATIA V5, SmarTeam and Solumina. - Must be able to work the weekend shift (4/10 schedules Friday - Monday).

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 09/15/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Mechanical Design Engineer

    Description:
    Unique Skills:
    Extensive Flight Test mechanical design experience required. Extensive knowledge and experience in CATIA V5

    Education/Experience:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area
     
    Job Number: 24-172
    Job Location: Savannah, GA
    Rate: $56-$67
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 08/28/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Mechanical Design Engineer (TS II)

    Description:
    Unique Skills:
    A Flight Test Mechanical Design Engineer (Tech Spec II). You will be responsible for: - Reviewing defects, establish root causes and providing dispositions to repair the discrepant condition using engineering best practices. - Ensuring that the proposed repair is equivalent to the Blueprint design and that it will not affect system functionality. - Acting as the single point of contact for Mechanical Design and Flight Test MRB to supports Operations during the weekend shift to maintain aircraft availability. The following qualifications are required for this role: - Strong working knowledge of Flight Test Instrumentation Mechanical Design. - Strong working knowledge of Flight Test Aircraft Systems. - Working knowledge of CATIA V5, SmarTeam and Solumina. - Must be able to work the weekend shift (4/10 schedule Friday - Monday).

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv. degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.


    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Principle Duties and Responsibilities:

    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product perform other duties as assigned.
     
    Job Number: 103981
    Job Location: Savannah, GA
    Per Diem: Possible
    Overtime: Possible
    Start Date: ASAP
    Input Date: 06/06/2017
    Firm Name: INTERGEN GROUP
    Attention: cort hayes
    Address: SUITE 200
    5051 PEACHTREE CORNERS CIR

    City, State: PEACHTREE CORNERS, GA 30092
    Phone: 678/318-1816
    Fax Phone: 678/493-1467
    Website: www.intergengroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Generalist Project Management (OK)

    Description:
    Oversees and manages the operational aspects of ongoing projects and serves as liaison between project management and planning, project team, and line management. Reviews status of projects and budgets, manages schedules, and prepares status reports. Assesses project issues and develops resolutions to meet productivity, quality, and client-satisfaction goals and objectives. Develops mechanisms for monitoring project progress and for intervention and problem solving with project managers, line managers, clients and other stakeholders.

    Requirements: Level 3

    Education/Experience:
    Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience.

    Hours: 7:30 am - 4:30 pm with 1 hour for lunch
    Not overtime expected

    Position is based in Tulsa with travel as needed to McAlester (could be weekly)
    Will be managing the transfer of work from Suppliers to McAlester, OK facility. There is a significant on load of new work that requires dedicated attention to manage the project to completion.

    Requires experience in ME Planning and NC Machining processes.
    The planning and programming processes have been implemented.

    Looking for Project Manager to manage the process that has been developed, identify any issues and know the right person to go to for resolution of issues.

    FOSTER DESIGN'S BENEFITS:
    • Working for a 53-year old company
    • Minimum 6 Paid Holidays
    • Blue Cross Blue Shield – Group Medical Insurance Plan
    • MetLife – Long Term Disability Insurance
    • Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
    • Vacation Pay
    • Paid Weekly (Direct Deposit)
     
    Job Number: FD-511478OK
    Job Location: Tulsa, OK
    Rate: $BOE/HR
    Per Diem: Yes Possible-Plus Split
    Overtime: No
    Duration: 11 months or longer
    Start Date: 07/07/2017
    Input Date: 07/12/2017
    Firm Name: FOSTER DESIGN INC
    Attention: Recruiter
    Address: 200 W DOUGLAS AVE STE 110
    City, State: WICHITA, KS 67202
    Phone: 316/832-9700
    800 Phone: 800/345-3394
    Fax Phone: 316/832-9357
    Website: www.fosterdes.com

    Ground Test Engineer

    Description:
    "PDS Tech is seeking a Materials and Process Engineer for an open position in Stratford, CT

    Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems. This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure. Test programs typically involve main and tail rotor whirl tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight. Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft.  A large portion of the job is oversight of supplier performed component qualification efforts.
    Responsible for specific discrete tasks covering all aspects of Ground Testing helicopter components and systems.



     




    Skills Required:
    - Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.
    - Ideal candidate will have a minimum of a Bachelor of Science in Mechanical or Aerospace Engineering and 12+ years of relevant experience.
     

     
    Job Number: 1610052324
    Job Location: Stratford, CT
    Per Diem: No
    Duration: 24 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ryan Bushey
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000001skLkAAI&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Ground Test Engineer - RM

    Description:
    Johnson Service Group (JSG) is seeking a Ground Test Engineer for a 15 month contract opportunity in Stratford, CT!

    Description:

    Ground Test (GT) Engineers are responsible for projects with significant scope and complexity covering the mechanical and structural aspects of Ground Testing helicopter components and systems.
    Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports.
    This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.
    Two large portions of out statement of work involves supplier qualification and fatigue substantiation which correlates laboratory fatigue test strength data with measured flight test loads and the customer's mission spectrum to produce dynamic component retirement times and/or inspection intervals that reduce the chance of catastrophic fatigue fracture to an extremely remote possibility.
    Tasks also include supporting and establishing operating limitations for both flight test programs and fielded aircraft.
    Skills Required:

    Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.
    Ideal candidate will have a minimum of a Bachelor of Science in Mechanical or Aerospace Engineering and 12+ years of relevant experience.
     
    Job Number: 356467
    Job Location: Stratford, CT
    Rate: $64hr
    Per Diem: yes
    Overtime: possible
    Duration: 15 months
    Start Date: asap
    Input Date: 06/16/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Rich Martinsen
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    HVAC/Mechanical Engineer

    Description:

    Primary Responsibilities:



    Candidate will be responsible for leading projects, defining scope and responsibilities, leading a team of engineers/designers



    Must ensure deliverables meet the scope and client expectations 



    Support procurement activities, including coordination with vendors and vendor drawing reviews



    Support contractor reviews, and installation planning activities



    Individual will travel globally for machine installation, check out and start up



    Candidate will plan the work, and track and report work in progress



    Will lead a design team for projects, and work with other disciplines to assure the project design is complete and accurate


    Qualifications:



     



    BS or MS in Mechanical or Chemical Engineering required



    7 to 10 years of related experience is required. Experience with an engineering consulting firm is a plus.



    Candidate should possess good experience on HVAC systems, utilities and fire systems design



    Knowledge of design problems of civil and industrial area of various kinds and, possibly, related to fire protection it would be considered an asset 



    Experience in setting, development, evaluation and implementation of projects for air conditioning systems, generation and distribution utilities in the industrial and civil sectors



    Knowledge of issues related to the pharmaceutical, consumer products, and chemical industry would be an advantage



    Knowledge of boiler systems is preferred



    Candidate must be able to calculate heat balance, air balance, mass balance, line sizing, and duct sizin



    Knowledge of international standards such as ASME, AMCA, ASHRAE , SMACNA ACGIL are required



    Should be able to select and size the boilers, fans, coils, duct, and other HVAC elements



    Candidate must possess good communication skills and be able to successfully interact with clients on global project



    Microsoft Office experience is required



    AutoCAD and SolidWorks experience is preferred



    Domestic and international travel will be required


     
    Job Number: 1610057836
    Job Location: Green Bay, WI
    Duration: 4 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Sue Van Pay
    Address: 110 PACKERLAND DR STE A
    City, State: GREEN BAY, WI 54303
    Phone: 920/499-9943
    800 Phone: 800/333-1389
    Fax Phone: 920/499-9067
    Email: cecjgreenbay@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FhcTAAS&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    HYDRAULIC/MECH. FLT CONTROLS - RM

    Description:
    JSG is looking for a HYDRAULIC/MECH. FLT CONTROLS for our client.

    15 MONTHS CONTRACT. No C2C or H1B sponsorship.

    STRATFORD, CT

    Description:

    Provide administrative support to the Hydraulics and Mechanical Controls team on the 53K program.
    Responsibilities include developing design change notices, supporting engineer change requests, and tracking engineering design changes through the entire release process.
    Responsibilities also include supporting supplier managers and cost account manager utilizing the COMPANY EV system.
     
    Job Number: 358686
    Job Location: Stratford, CT
    Rate: $37hr
    Per Diem: yes
    Overtime: Yes
    Duration: 15 months
    Start Date: asap
    Input Date: 06/16/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Rich Martinsen
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    Heavy Equipment Mechanic -SECRET

    Description:
    PDS Tech is seeking a Heavy Equipment Mechanic for an open position in Washington DC



    This position installs heating, refrigeration equipment, hot and chilled water systems, and air conditioning equipment, and ensures that specific temperatures are maintained during equipment and systems phase-in operations. Additional responsibilities include: 

    • Operates, monitors, tests and documents the performance of assigned equipment, to detect malfunctions or operational problems, and evaluates equipment performance. 

    • Maintains, modifies, and overhauls all applicable plant equipment (HVAC equipment). 

    • Performs routine preventive maintenance tasks. Assesses preventive maintenance procedures and develops improvements. Assures compliance with all safety requirements and performs safety training. 

    • Provides technical direction and training to lower level personnel. 

    • Recommends changes to spare parts inventories. 

    • Prepares technical data and specifications for building and equipment procurement, installation, operation and maintenance.
     

     
    Qualifications 

    • High School Diploma or equivalent and 2 years of related experience 


     
     
    Job Number: 1710065372
    Job Location: WA, DC
    Duration: 6 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ramon Quintana
    Address: 1839 S ALMA SCHOOL RD STE 250
    City, State: MESA, AZ 85210
    Phone: 480/929-9922
    800 Phone: 800/657-0997
    Fax Phone: 480/929-9779
    Email: cecjphoenix@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021X1cAAE&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Hydraulic Design, Electro-Mechanical Systems Engineer/TSII

    Description:
    UNIQUE SKILLS
    Basic understanding of Hydraulics as it applies to aircraft is required. Use of CATIA or similar 3D CAD system is required. Experience with Hydraulic Design preferred. Experience with CATIA tubing work bench is preferred. Experience with designing for compliance to FAR 25.1435 is preferred.

    EDUCATION AND EXPERIENCE REQUIREMENTS
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in the specific technical discipline or 15 yrs. broad engineering experience in several technical disciplines with Bachelors, or 8 yrs. in the specific technical discipline with Masters, or 6 yrs. in the specific technical discipline with PhD.

    POSITION PURPOSE
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    ADDITIONAL FUNCTIONS
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    2. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering, or related curriculum preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 16-629-78841
    Job Location: Southeast
    Rate: $60.00 to $63.00/per hr.
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 07/13/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Hydraulic Design/Electro-Mechanical Systems Engineer

    Description:
    Hydraulic Design/Electro-Mechanical Systems Engineer

    Location: Savannah, GA
    Rate: $60.00 - $63.00/HR
    Long Term contract


    Unique Skills:
    - Basic understanding of Hydraulics as it applies to aircraft is required.
    - Use of CATIA or similar 3D CAD system is required.
    - Experience with Hydraulic Design preferred.
    - Experience with CATIA tubing work bench is preferred.
    - Experience with designing for compliance to FAR 25.1435 is preferred.


    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.


    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6524
    Job Location: Savannah, GA
    Rate: $60-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 07/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Hydromechanical -- Wing High Lift

    Description:
    Hydro-mechanical, Global 7000/8000

    Job location: Toronto, Ontario Canada

    Paid Travel
    Great Hourly Rates
    Direct Deposit
    Per Diem
    Tax Benefits
    Healthcare Options
     
    Job Location: Canada
    Input Date: 03/27/2017
    Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
    Attention: Erika
    Address: 150 RESEARCH BLVD
    City, State: ROCHESTER, NY 14623
    Phone: 585/441-9800 x106
    Email: erika.legrand@noramtecna.com
    Website: www.noramtec.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Instrumentation Engineer

    Description:
    Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

    Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns.

    Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex mechanical systems, testing of electrical systems and components such as motor controllers, actuator controls, & system controllers. Capability of working independently and is self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.
     
    Job Number: CT36053
    Job Location: Windsor Locks, CT, CT
    Rate: 67.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 1 year
    Input Date: 06/06/2017
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Bill Carriveau
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    Integration Specialist Technician

    Description:
    PDS Tech is seeking an Integration Specialist Technician for an open position in Huntsville, AL.
    In your role, you will:

    • Perform assigned duties as an individual or as a member of a crossfunctional High Performance Work Team (to include supplier and customer representatives), during all phases of assembly, integration and test from developmental prototyping to the execution of production integration activities. Meet customer satisfaction requirements for quality, performance and reliability.
    • Perform functional checkouts and system testing of electrical, electronic, mechanical systems and ground support equipment. Troubleshoot, fault isolate and document nonconformances to correct malfunctions, to component level, with minimal technical support. Perform, as required, approved rework, modification, repairs and incorporation of changes per technical documentation and formal direction to electrical, electronic and mechanical systems.
    • Assist in defining, implementing, completing and monitoring the execution of the work scope. Make recommendations for refinement to equipment and integration processes by conducting studies and evaluations that result in product and process improvements.
    • Analyze product, process & test data, and rejection history to identify root cause for problems and assist with developing corrective action.
    • May be required to perform duties in and around ordnance or other hazardous materials while maintaining a safe working environment. May be required to obtain a security clearance, per specified program requirements.
    • Perform all elements of mechanical, electrical and electronic assembly, integration and test from detail fabrication, buildup of assemblies & subassemblies, through final integration.
    • Select correct parts, materials and tools to perform assigned duties. Duties may include the handling of hazardous waste (if qualified). Handle and protect components and assemblies in accordance with proper practice and procedures.Move materials from place to place within the work area.
    • Perform critical handling tasks and operate special electrical, electronic, mechanical and support equipment. Use and operate shop tools and equipment including precision measuring instruments and equipment including optics and lasers. Operate various types of shop equipment such as band saw, drill press, sander, bench grinder, metal bending equipment and other related machinery on a variety of materials.
    • Perform assembly work to complete assignments. Related tasks may include fabrication, installation, adjustment, fit check, fastener alignment, connections, and subassembly integration of parts and materials.
    • Perform chemical cleaning, surface finishing, painting, marking in accordance with specifications and procedures.
    • Use any electrical and electronic test equipment, instruments and tools required to perform assigned work, including precision measuring instruments and equipment. Connect, operate and/or verify support equipment, set up and check out of electrical, electronic and mechanical systems.
    • Troubleshoot, fault isolate and document nonconformances.
    • Perform related rework and approved repair necessary to accomplish assignments
    • Devise, develop and assemble approved shop aides and devices that may be required to adjust, test or maintain electrical and mechanical systems equipment.
    • Perform self examination and inspection as certified and required.
    • Plan, sequence and organize work operations to meet production schedules and expedite special jobs.
    • Coordinate information to advise others of situations or conditions that will delay work progress and suggest corrective action.
    • Assist others in the performance of their assigned work giving technical assistance to specifications and requirements as required.
    • Set up and maintain charts, logs, records and reports.
    • Maintain licenses, permits and certifications required to perform assigned work.
    • Perform other duties as assigned within the general job classification
    • Maintain a safe clean and orderly work area.

    As our ideal candidate, you will meet the following requirements:
    • High School Diploma or GED
    • Possess technical skills necessary to perform work using detail work instructions & other released planning documentation and a variety of other supporting technical documentation as required including but not limited to: technical drawings, 2D & 3D models, schematics, circuit/wiring diagrams, process and equipment specifications, photographs, illustrations and sketches.
    • Must be a U.S. Citizen.





     
     
    Job Number: 1610054052
    Job Location: Huntsville, AL
    Per Diem: No
    Duration: 6 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CGGpAAO&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Lead Systems Engineer

    Description:
    Ability to obtain secret clearance

    •We are seeking an Lead Systems Engineer who will technically contribute to the Consolidated Product line Management .You will be a part of the development of next generation military C2 training environments using Modeling and Simulation.
    •Significant use, understanding and tailoring of systems engineering concepts, principles, and theories
    •Frequently contributes to the development of innovative principles and ideas
    •Hands-On experience in all aspects of design, integration, testing, and simulation communication systems, test equipment and simulation systems
    •Significant proficiency with requirements management, system design & system modeling tools
    •Recognizes various architectural patterns, applies them appropriately, understands strengths/weaknesses within those architectures and develops architectural variations as necessary
    •Familiar with Enterprise Architecture Frameworks
    •Significant written and verbal communications skills
    •Ability to multi-task
    •Significant skills in communicating issues, impacts, and corrective actions
    •Significant ability to clearly report information relevant to sound systems engineering design
    •Significant understanding and ability to apply project leadership principles including SPI/CPI, Earned Value, Cost Account Management (CAM), and Statistical Process Controls
    •Design and analyze systems, and equipment including computational, network and mechanical interfaces Conduct feasibility studies and test new and modified designs
     
    Job Location: FL
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos
    Start Date: ASAP
    Input Date: 06/08/2017
    Firm Name: PANTHER GROUP
    Attention: Bill
    Address: 5 MILL AND MAIN PL STE 430
    City, State: MAYNARD, MA 01754
    Phone: 781/790-7900
    800 Phone: 800/776-0562
    Fax Phone: 781/672-2570
    Website: www.thepanthergrp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer

    Description:
    Manufacturing Engineer under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.


    Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

    Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

    Education and Experience Requirements:
    Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience
     
    Job Location: Savannah, GA
    Rate: Negotiable
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 08/14/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer II

    Description:
    Unique Skills:
    Solumina and SAP experience preferred.

    Education and Experience Requirements:
    Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


    Position Purpose:
    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
    2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
    3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
    4. Investigate and assist in preparing justification for equipment and facility requests.
    5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
    6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
    7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
    8. Incorporate Lean Manufacturing Methodology into existing and future processes.
    10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
    11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
    12. Support all Safety, Sustainability and Ergonomic Initiatives.
    13. Aid in development and maintenance of Business Continuity Plan.

    Additional Functions:
    1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
    2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

    Other Requirements:
    1. Proven knowledge of Lean and/or Six Sigma principles.
    2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
    3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
    4. Lean Six Sigma Greenbelt Certification or higher preferred.
     
    Job Number: 17-685-100343
    Job Location: Southeast
    Rate: $50.00/per hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 07/13/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer II

    Description:
    Manufacturing Engineer II

    Location: Savannah, GA
    Rate: $50.00/HR
    Duration: Long Term contract
    Shift: 1st Shift


    Unique Skills:
    - Solumina, CATIA and SAP preferred. Prefer prior experience on live aircraft and/or in environment of aircraft reconfiguration.

    Education and Experience Requirements:
    Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

    Position Purpose:
    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

    Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

    Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
     
    Job Number: 7511
    Job Location: Savannah, GA
    Rate: $50.00/HR
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Input Date: 12/04/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer II

    Description:
    Manufacturing Engineer II

    Location: Savannah, GA
    Rate: $50.00/HR
    Duration: Long Term contract
    Shift: 4x10


    Unique Skills:
    Required: SAP - Catia - Solumina

    Education and Experience Requirements:
    Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

    Position Purpose:
    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

    Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

    Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
     
    Job Number: 7515
    Job Location: Savannah, GA
    Rate: $50.00/HR
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Input Date: 12/04/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer II

    Description:
    Manufacturing Engineer II

    Location: Savannah, GA
    Rate: $50.00 - $55.00/HR
    Duration: Long Term contract
    Shift: 4x10

    Unique Skills:
    Required Skills: SAP, Solumina, MS Excel, Catia V5, Smarteam

    Education and Experience Requirements:
    Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

    Other Requirements:
    1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.


    Position Purpose:
    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

    Additional Functions:
    1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
     
    Job Number: 7459
    Job Location: Savannah, GA
    Rate: $50.00 - $55.00/HR
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Input Date: 07/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Manufacturing Engineer II - 372741

    Description:
    **Shift is 4x10**

    Position Purpose:
    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

    Essential Functions:
    1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
    2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
    3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
    4. Investigate and assist in preparing justification for equipment and facility requests.
    5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
    6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
    7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
    8. Incorporate Lean Manufacturing Methodology into existing and future processes.
    10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
    11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
    12. Support all Safety, Sustainability and Ergonomic Initiatives.
    13. Aid in development and maintenance of Business Continuity Plan.
    14. Author DRDI/DMT rework instructions to support effective corrective actions.
    15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
    16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

    Additional Functions:
    1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
    2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
    Preferred Skills:
    SAP
    Catia
    Solumina

    Education and Experience Requirements: Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.
     
    Job Number: 372741
    Job Location: Savannah, GA
    Rate: TBD
    Duration: 12 - months
    Start Date: ASAP
    Input Date: 01/20/2018
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/646-2688
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    Manufacturing Mechanic

    Description:

    Please send your resume directly to Joyce Branch jbranch@pdstech.com or call 843-277-6925
     Description:



    • Perform disassembly, clean, requalification, rework and assembly operations on Traction Motor Combo component utilizing manual equipment and automated equipment in accordance with manufacturing and quality procedures. 
    • Inspect work completed on components to internal inspection criteria for compliance to quality or engineering requirements. 
    • Responsible to perform work in a safe manor in support of lean manufacturing principals such as but not limited to 5s or single piece flow to required takt time. 
    • Operation of Overhead cranes. 
    • In some cases may have to perform special process such as welding or non-destructive testing which will require special process training or certification.


    Responsibilities: 



    • Provide manufacturing support for manufacture or remanufacture of UX Traction Motor Combo components for the facility. 
    • Utilize manual and automated production equipment, various hydraulic or pneumatic tools for completion of responsibilities in accordance with in-house manufacturing and quality procedures to ensure all products meet specified requirements. 
    • Inspect work completed on components to internal inspection criteria for compliance to quality or engineering requirements utilizing fixtures, precision measuring devices and or testing protocols. 
    • Sign-off on the process documentation for each of the work steps performed. 
    • Required to process components in compliance with internal processing requirements.  
    • Required to perform work in compliance to all safety and EHS policies and procedures. 


    Qualifications:  ·      



    • Knowledge of EHS procedures and policies
    • Knowledge of safe use manual equipment and hand tools for assigned product lines
    • Working knowledge of use of inspection measurement equipment  
    • Understanding of all manufacturing and quality procedures associating assigned product line in a lean manufacturing environment
    • Maintain acceptable defect rates  
    • Successful completion of training requirements
    • Where applicable, trained in special processes such as but not limited to welding or non-destructive testing


    Training requirements:  ·      



    • Demonstrate ability to safely complete job tasks utilizing manual or automated equipment as well as use of gages needed for inspection or testing as required     ·      
    • Demonstrate ability to document and record inspection results per in-house procedures  
    • Successful completion of quality audit to internal procedures on assigned product line and/or use of equipment

    Please send your resume directly to Joyce Branch jbranch@pdstech.com or call 843-277-6925
     
    PDS Tech, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status.

     
     

     
    Job Number: 1710066311
    Job Location: Las Vegas, NV
    Duration: 12 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Eric Khassanov
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000021ceoAAA&URLSource=cjhunter

    Mechanic

    Description:
    Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
    Will be operating a crane or fork lift.
     
    Responsibilities:
    Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
     
    Qualifications:
    • Knowledge of EHS procedures and policies
    • Knowledge and safe use of production related equipment
    • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
    • Millwright Skills and familiar with Electrical and/or Hydraulic
    • Able to interpret OEM handbooks and/or plant diagrams
    • Understanding of reading building plans and electrical schematics
    • Ability to use trouble-shooting and precision measuring equipment
    • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
    • Vocational or technical training in a maintenance related discipline, strongly preferred

     
    Training requirements:

    • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
    • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
    • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
    • Where applicable, complete safety and maintenance training and or certification

     
     
     
     
     

     
    Job Number: 1610060095
    Job Location: KS City, MO
    Duration: 12 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Eric Khassanov
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FtZOAA0&URLSource=cjhunter

    Mechanic Technician II

    Description:
    PDS Tech is seeking several mechanics for positions in Kansas City.
    Must have steel toed shoes/boots; all assignments are one year in length
    TWO - 1ST Shift KCR Remanufacturing Techs - Kansas City MO
     
     
     
    Work may involve used mechanical parts. Aprons & Coveralls are available to contractors; must have steel toed shoes
      
     Operation of Overhead Cranes is involved in this job
    Essential Functions / Responsibilities:*Perform disassembly, clean, requalification, rework and assembly operations on Traction Motor Combo component utilizing manual equipment and automated equipment in accordance with manufacturing and quality procedures. Inspect work completed on components to internal inspection criteria for compliance to quality or engineering requirements. Responsible to perform work in a safe manor in support of lean manufacturing principals such as but not limited to 5s or single piece flow to required takt time. In some cases may have to perform special process such as welding or non-destructive testing which will require special process training or certification. Operation of overhead cranes
    Basic Qualifications / Requirements:*• Must have high school diploma or GED at a minimum
    Knowledge of EHS procedures and policies
    • Knowledge of safe use manual equipment and hand tools for assigned product lines.
    • Working knowledge of use of inspection measurement equipment
    • Understanding of all manufacturing and quality procedures associating assigned product line in a lean manufacturing environment
    • Maintain acceptable defect rates
    • Successful completion of training requirements
    • Where applicable, trained in special processes such as but not limited to welding or non-destructive testing
    Desired Qualifications:*• Demonstrate ability to safely complete job tasks utilizing manual or automated equipment as well as use of gages needed for inspection or testing as required
    • Demonstrate ability to document and record inspection results per in-house procedures
    • Successful completion of quality audit to internal procedures on assigned product line and/or use of equipment

     

    For consideration to this position, please contact Earl Sawyer at esawyer@pdstech.com or 843-277-6616.


     
    Job Number: 1710067688
    Job Location: KS City, MO
    Duration: 12 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Eric Khassanov
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000012YKOAA2&URLSource=cjhunter

    Mechanic Technician II

    Description:
    PDS Tech is seeking several mechanics for positions in Kansas City.
    Must have steel toed shoes/boots; all assignments are one year in length
    3rd Shift Position
     
     
     
    Work may involve used mechanical parts. Aprons & Coveralls are available to contractors; must have steel toed shoes
      
     Operation of Overhead Cranes is involved in this job
    Essential Functions / Responsibilities:*Perform disassembly, clean, requalification, rework and assembly operations on Traction Motor Combo component utilizing manual equipment and automated equipment in accordance with manufacturing and quality procedures. Inspect work completed on components to internal inspection criteria for compliance to quality or engineering requirements. Responsible to perform work in a safe manor in support of lean manufacturing principals such as but not limited to 5s or single piece flow to required takt time. In some cases may have to perform special process such as welding or non-destructive testing which will require special process training or certification. Operation of overhead cranes
    Basic Qualifications / Requirements:*• Must have high school diploma or GED at a minimum
    Knowledge of EHS procedures and policies
    • Knowledge of safe use manual equipment and hand tools for assigned product lines.
    • Working knowledge of use of inspection measurement equipment
    • Understanding of all manufacturing and quality procedures associating assigned product line in a lean manufacturing environment
    • Maintain acceptable defect rates
    • Successful completion of training requirements
    • Where applicable, trained in special processes such as but not limited to welding or non-destructive testing
    Desired Qualifications:*• Demonstrate ability to safely complete job tasks utilizing manual or automated equipment as well as use of gages needed for inspection or testing as required
    • Demonstrate ability to document and record inspection results per in-house procedures
    • Successful completion of quality audit to internal procedures on assigned product line and/or use of equipment



    For consideration to this position, please contact Eric Khassanov at ekhassanov@pdstech.com or 843-277-6611.
     

     
    Job Number: 1610059718
    Job Location: KS City, MO
    Duration: 12 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Eric Khassanov
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Fr1dAAC&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer - Level 2

    Description:
    Mechanical Design Engineer - Level 2

    Location: Orlando, FL
    Rate: $60.00 - $65.00/HR
    1 year contract
    1st Shift

    **Must have a current ACTIVE secret clearance**

    Description:
    - Work with Mechanical Engineering Lead to assist in the mechanical design, engineering documentation, trade studies, and drawing release for the System.
    - Verify tolerance analysis on system components has been performed.
    - Work with Designer’s to ensure the design meets all requirements including Safety of Flight (SOF).
    - Additionally, the checker will work with the Liaison Engineer to ensure the work flows in PLM are properly maintained.
    - Work closely with Mechanical Engineering to support all program objectives.

    Skill/Experience/Education
    Mandatory:
    - BS degree in Mechanical Engineering, or equivalent related education and experience.
    - Experience with all aspects of mechanical design, including layout, documentation and checking IAW ASME Y14.24 and familiar with MIL-T-3100 and MIL-STD-100.
    - Five (5) to ten (10) year’s experience of creating Pro-E/CATIA drawings and drawing release.
    - Proficiency with Pro-E/Windchill and Intralink is required.
    - Knowledge of LMC drawing release procedures is desired.
    - Good knowledge of all aspects of Mechanical engineering is essential.
    - Previous LMC experience is a plus.
     
    Job Number: 7009
    Job Location: Orlando, FL
    Rate: $60.00 - $65.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 1 yr
    Input Date: 10/20/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer - Level 2

    Description:
    Mechanical Design Engineer - Level 2

    Location: Dallas, TX
    Rate: $50.00 - $60.00/HR
    6 month contract
    1st Shift

    **Must have a current ACTIVE secret clearance**

    Description
    - Mechanical Design Engineer to support the Tactical Missiles Advanced Programs (TMAP) area design effort.
    - Tasks will include conceptual and detail design of missile components, systems, and subsystems, and creation of 3D solid models and 2D drawings.
    - Effort will require coordination of design(s) with other mechanical / electrical disciplines, familiarity with Solid Rocket Motors (SRMs), SRM suppliers, booster separation systems, and tolerance analysis.
    - Must have Active Secret Clearance at time of submittal, preferably within the last 5 years. Please provide status of clearance on resume.


    Skill/Experience/Education
    Mandatory:
    - Candidate should have a Bachelors of Science degree in Mechanical Engineering, or 10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer / CREO 3.
    - Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, knowledge of Geometric Dimensioning and Tolerancing, and experience with manufacturing engineering and fabrication processes.
    - Familiarity with Microsoft Office applications is desired.
     
    Job Number: 6908
    Job Location: Grand Prairie, TX
    Rate: $50.00 - $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Input Date: 07/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer - Level 3

    Description:
    Mechanical Design Engineer - Level 3

    Location: Orlando, FL
    Rate: $55.00/HR
    1 year contract

    **Must have a current ACTIVE secret clearance**

    Description
    - Work with Mechanical Engineering Lead to assist in the mechanical design, engineering documentation, trade studies, and drawing release for the System.
    - Perform weights and tolerance analysis on system components.
    - Work concepts and detail designs to fit Platform Requirements.
    - Designer will work the design layout, and follow-up working with mechanical analyst to ensure the design meets all requirements including Safety of Flight (SOF).
    - Additionally, the designer will work with the supplier during the design and manufacturing process to mitigate and production issues.
    - Work closely with Mechanical Engineering to support all program objectives.


    Skill/Experience/Education
    Mandatory:
    - BS degree in Mechanical Engineering, or equivalent related education and experience.
    - Experience with all aspects of mechanical design, including layout and design documentation.
    - 5 to 10 experience of creating PRO E/CATIA drawings and drawing release.
    - Proficiency with PRO E/CATIA and Intralink is required.
    - Knowledge of LMC drawing release procedures is desire.
    - Good knowledge of all aspects of Mechanical engineering is essential.
    - Ability to obtain a security clearance is mandatory.
    - Previous LMC experience is a plus.
     
    Job Number: 7018
    Job Location: Orlando, FL
    Rate: $55.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 1 yr
    Input Date: 06/20/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer - Level 3 / Pro/e Catia V5 / active secret clearance FL

    Description:
    1288
    Mechanical Design Engineer - Level 3
    Orlando FL
    60-65/hr
    Ability to obtain a security clearance is mandatory. Previous LMC experience is a plus.

    Description
    Work with Mechanical Engineering Lead to assist in the mechanical design, engineering documentation, trade studies, and drawing release for the System. Perform weights and tolerance analysis on system components. Work concepts and detail designs to fit Platform Requirements. Designer will work the design layout, and follow-up working with mechanical analyst to ensure the design meets all requirements including Safety of Flight (SOF). Additionally, the designer will work with the supplier during the design and manufacturing process to mitigate and production issues. Work closely with Mechanical Engineering to support all program objectives.
    Skill/Experience/Education
    Mandatory:

    BS degree in Mechanical Engineering, or equivalent related education and experience. Experience with all aspects of mechanical design, including layout and design documentation. 5 to 10 experience of creating PRO E/CATIA drawings and drawing release. Proficiency with PRO E/CATIA and Intralink is require. Knowledge of LMC drawing release procedures is desire. Good knowledge of all aspects of Mechanical engineering is essential. Ability to obtain a security clearance is mandatory. Previous LMC experience is a plus.
    Desired:

    BS degree in Mechanical Engineering, or equivalent related education and experience. Experience with all aspects of mechanical design, including layout and design documentation. 5 to 10 experience of creating PRO E/CATIA drawings and drawing release. Proficiency with PRO E/CATIA and Intralink is require. Knowledge of LMC drawing release procedures is desire. Good knowledge of all aspects of Mechanical engineering is essential. Active secret required. Previous LMC experience is a plus.
     
    Job Number: DW-1288
    Job Location: Orlando, FL
    Rate: 60-65/hr max
    Duration: 12 month contract
    Input Date: 06/27/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer

    Description:
    Mechanical Engineer - Tech Spec II

    Savannah, GA
    Rate: $60-$63
    Long Term contract

    Unique Skills:

    Must be proficient in V4 and V5 Catia with Smarteam experience. Must have experience with design and Electrical Equipment Installations or Aircraft Mechanical Systems design. Previous Aircraft STC modification experience is desired. Previous Gulfstream Experience preferred. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:

    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 7058
    Job Location: Savannah, GA
    Rate: $60-$63
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Input Date: 10/06/2017
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Mechanical Engineer

    Description:

    PDS Tech, Inc. is seeking a Mechanical Engineer for a position located in Kansas City, MO. 
    Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

    The Client's organization has several open opportunities for Mechanical Engineers.  We are seeking engineers who are interested in supporting one or more of the following areas:  product engineering, process engineering, purchased product engineering, systems engineering and mechanical testing.  Job title will be commiserate with level of experience. 

     
    • Completes assignments and provides detailed instructions in the design and/or project management of new and current projects, products, programs, components, tools and acceptance equipment under technical guidance of higher level engineers or departmental management
    • Participates in establishing operating procedures on new products and components
    • Assists in the development of test procedures and performance of routine to moderately complex engineering evaluation tests, product and process capability studies, quality audits, product or project data reviews, and other engineering evaluation work
    • Evaluates opportunities for defect prevention based on standard or accepted solutions
    • Prepares evaluation reports, analyzes discrepancies, and makes recommendations for product, test equipment, procedures and manufacturing or operating processes that improve productivity and quality and reduce flowtime
    • Assists in the preparation of product or project definitions, manufacturing drawings and specifications, and test equipment designs
    • Defines and acquires tooling, gaging and other equipment necessary to manufacture parts and to assure product quality
    • Interacts with design agencies, suppliers and/or internal org