Job Search Results

194 listings were found that matched your search words: Keywords: CAD ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2017/12/17 Sunday 07:58AM Pacific Time by ContractJobHunter. )

Listings 1 - 194

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Design Engineers - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring Aerospace Design Engineers for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• To design tooling, fixtures or equipment per customer specifications to meet the intended need
• Develop advanced planning on tooling concepts
• Support manufacturing during build phases and resolve any non-conformances in a timely manner
• Utilize CAD software to perform FEA analysis on designs, write FEA reports and provide design feedback to design engineers
• To support and provide feedback on customer RFQ’s
• Assume other accountabilities and duties as assigned by the Leadership

Qualifications:

• Strong CAD (Catia, NX, etc.) design abilities including 3D modeling and complex assemblies
• Experience with and/or knowledge of Tooling Design and Manufacturing, Controls knowledge a plus
• Experience with and/or knowledge of Automated Production Systems a plus
• Ability to effectively prioritize and execute tasks in a high-pressure environment including following on tools during the fabrication, build installation and commissioning phases of the project
• Ability and willingness to travel to any of the customer and Company’s work locations in North America, Europe and Asia, as required by Management
• Must be willing to work extended hours, when necessary, including overtime, weekends and holidays and on night shift, as project and customer demands dictate
• Excellent interpersonal, written and verbal communication skills
• Ability to work with others, including peers and personnel in other departments
• Eligibility for clearance under the Canadian Controlled Goods and the American ITAR requirements
• At minimum a Bachelor of Science in Mechanical or Aerospace Engineering, Masters of Science in an engineering discipline preferred
• PE license preferred, must show ability to attain license
• Minimum 5 years’ experience performing stress analysis utilizing FEA software (Abaqus, Algor, NASTRAN/PASTRAN, etc.) and performing hand calculations

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39985
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
A leading Aerospace company, located in Canoga Park, CA, is seeking a Principal Engineer - Avionics, for a 8+ month contract role.

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

-Support Electro-Mechanical Packaging of complex electrical/electronic assemblies required.
-Extensive experience in Creo design required.
-Candidate must have strong GD&T and tolerance analysis skills required.
-Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.
-Experience in design of cables and harnesses for applications for Aerospace products.
-Proficiency in use of Creo PDM/Link and Windchill.
-Proficiency in generating drawings is required.

Skills:
-Electronic-Mechanical Packaging Design a must.
-ProE/Creo CAD design a must.
-GD&T a must.
-Electronic packaging design for harsh environments.
-Design of cables and harnesses.
-Drawing Generation.
-Tolerance Stack-up analysis.
-Creo PDM/Link and Windchill.

Education:
-BSME with 10 years of experience or 15 + years of equivalent experience.
 
Job Number: 12241
Job Location: Canoga Park, CA
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 8 Months+
Start Date: October
Input Date: 10/30/2017
Firm Name: LOGIN CONSULTING SERVICES
Attention: Tali Lerea
Address: 300 CONTINENTAL BLVD STE 530
City, State: EL SEGUNDO, CA 90245-5067
Phone: 310/607-9091
Fax Phone: 310/607-9818
Website: www.loginconsult.com

CAD Designer

Description:
PDS Tech, Inc. is seeking a candidate for CAD Designer in Plymouth​, MI. 

• Collaborate and work with cross-functional teams including Application Engineering, Product Engineering, Core Technologies, Manufacturing and Supply Base to ensure a robust design. Tier 1 automotive and commercial vehicle supplier working directly with customers on engine package study to define a turbocharger to fit in their engine environment. 
• Manage turbocharger assembly and BOM in the CAD. 
• Focus on part re-use and standardization. 
• Create design layouts with stack up studies to confirm form, fit and function of the product. Cast/machine and rotating component design. 
• Create final 3D models and drawings respecting HTT design standards. 
• Participate and lead meetings with internal teams and customers. 
• Supplier interface 
• Partner with the Global Design Engineering team to leverage the required resources to meet the design objectives and program timing. 
• Use of manufacturing best practice to optimize components costs. 
• Partner with the Global Design Engineering team to leverage the required resources to meet the design objectives and program timing. 
Basic Qualifications: 
• Bachelor’s Degree in Mechanical Engineering and 3 years minimum experience of CAD design in CATIA. 
• 1+ year experience internal combustion engines and turbochargers preferable 
• 3+ years experience in automotive engine packaging design preferable 
•3+ years experience Geometric Dimensioning & Tolerancing ASME Y14.5-1994 Knowledge preferable 

Additional Qualifications: 
• Experience with SmarTeam and Enovia/MatrixOne or other PLM systems. 
• Experience in casting and machine process preferred. 
 
Job Number: 1710067709
Job Location: Plymouth, MI
Duration: 7 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Israel Ireneo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000012YSNAA2&URLSource=cjhunter

CAD Openings

Description:
Hiring in multiple locations

Email your resume or apply online

Benefits Available
- long term contracts
- top per diem rates
- direct deposit
- referral bonuses
- 401(k) program
 
Input Date: 05/09/2017
Firm Name: NESC STAFFING
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
800 Phone: 800/562-3463
Email: lokeefe@nesc.com
Website: www.nesc.com

CAD Systems Administrator or CAD Technical Support

Description:

 
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: kpotter@advancedtechno.com
Website: www.advancedtechno.com

CAD/Nesting Operator – Level 1

Description:
Our client is seeking AutoCad/Nesting Operator to start ASAP.

In this role desired candidate will use standard CAD (Computer Aided Design) digitizing techniques and skills. Utilizes AutoCAD 2D in conjunction with TruNest nesting software to generate sheet metal flat pattern arrays. Make basic computations in coordination with specifications. Executes simple mathematical calculations. Leverages off existing rules and best practices to ensure developed sheet metal nests meet efficiency and effectiveness requirements.   


  • Must be proficient AutoCAD 2D user –This is a hard Requirement
  • Must be proficient Microsoft Office user –This is a hard Requirement
  • Experience with CNC machining is desired.


  • Utilizes AutoCad 2D in conjunction with TruNest nesting software to generate sheetmetal flat pattern arrays.
  • Leverages off existing rules and best practices to ensure developed sheet metal nests need efficiency and effectiveness requirements.
  • Ability to perform routine, repetitive and basic tasks where precedent, methods and processes are well established.


 
Job Number: 1710073335
Job Location: Pinellas Park, FL
Per Diem: No
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023G9aAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Manufacturing Engineer 2nd Shift - Aerospace

Description:
Description:

Manufacturing Engineer 2nd Shift - Aerospace and Defense

Ingenium Technologies - San Diego, CA

A Manufacturing Engineer 2nd Shift is needed for a proven and reliable world leader in Aviation Air-to-Ground Communications, Aircraft Systems and Tactical Reconnaissance Radars, as well as advanced high-resolution Surveillance Systems.


Responsibilities:

Perform detailed review of composite part CAD model and lamination drawing (solid and honeycomb panel designs)

Generate surface geometry representing tool and honeycomb core layers, generate boundary curve geometry for individual plies from the applicable CAD models and drawings

Utilize Siemens NX and FiberSIM PLM software package to produce a composite manufacturing solution for complex parts that adheres to engineering process specifications

Generate Flat Pattern and Laser Projection files using FiberSIM

Create Powerpoint PlyBook files from Flat Patterns, for use by the Manufacturing Engineering group in lamination work instructions

Provide support to manufacturing engineering on shop floor when needed



Software Requirements:

Experience with CAD, Siemens NX (Unigraphics)/FiberSIM, PLM is required


Required Experience:

5 to 15 Years experience in aerospace composite manufacturing, processing and materials knowledge.
Proficient with CAD (Creo and/or Pro E) and Siemens NX/FiberSIM PLM software
Working knowledge of composite part design and fabrication methods
Experience working in commercial and/or military aircraft manufacturing environments
Familiar with composite lamination drawings and process specifications
Previous hand layup experience with prepreg material is a plus


Required Education: Bachelor's degree preferred. Associate's degree in a related discipline and three or more years progressive experience in a technical field. May substitute equivalent professional experience in lieu of education/training.


Position: 2nd Shift, Contract to Hire, 6mos or longer

Location: San Diego, CA


Employment Criteria : This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Citizen, who does not work for a foreign company/foreign government/foreign governmental agency or organization, and is in compliance with International Traffic in Arms Regulations.


Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 95012
Job Location: San Diego, CA
Rate: $45.00
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: Now
Input Date: 09/13/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: David Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer (6 openings)

Description:
Composite Structural Design Engineer (6 openings)
Location: Mojave, CA
Duration: 12+ months
Hourly rate: Open, DOE
Desired Skills: MICROSOFT OFFICE;CATIA; Structural design of primary and secondary composite aircraft structure.
Composite Structural Design Engineer Job Description
Perform preliminary and detail design of metallic and composite structure, including initial sizing of joints, structure layout and design for manufacturability.
Create 3D/2D definition of parts, assemblies and installations.
CATIA V5, Composites workbench is a plus.
Establish manufacturing tolerances for production of structural components using GD&T.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements
Works with Industrial Design team to develop conceptual designs for cabin interior
Develops rapid prototypes for evaluation throughout design development process
Develops 3D CAD models and 2D engineering definition for detail parts, assemblies, and installations inside the pressurized cabin
Establishes manufacturing tolerances for production of structural components
Develops and documents system requirements and interface constraints for components
Coordinates with Analysis and Testing departments to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes .
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)
Educational Requirements
Bachelor's degree from an accredited institution, with a concentration in Aeronautical and Astronautical, Aerospace, or Mechanical Engineering..
Composite Structural Design Engineer requirements:
3 years or more experience design engineering for aerospace composite fabrication and assembly processes.
Proficient with CATIA V5
Required Workbenches: Part Design, Assembly Design, Sketcher, Drafting, Wireframe and Surface Design
Desired Workbenches: Generative Shape Design (GSD), Composites (CPD) Experience using GD&T and ASME Y14.5M-1994 drafting standards
Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
Experience designing for aerospace environments
D_ _esired Experience in the development of human spaceflight hardware desired
Experience with Product Lifecycle Management (PLM) software and configuration management processes
Excellent analytical and decision-making skills Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.
Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook
Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
Composite Structural Design Engineer
The Structures Company, LLC is an AA/EOE.
 
Job Location: Mojave, CA
Rate: "open"
Per Diem: yes
Overtime: possible
Duration: 12+ month
Start Date: asap
Input Date: 09/19/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Design Checker

Description:
1. Review 3D engineering data for conformance to requirements as directed.
2. Check parts for fit, form and function to the extent that information is available.
3. Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
1. Accuracy and completeness of engineering product definition data, including CAD and PDM data.
2. Proper application and compliance with all Engineering and customer drawing requirements.
3. Use and understanding of GD & T a must.
4. Dimensioning and tolerancing including familiarity with ASME Y14.5.
5. Application of best drafting and design practices and procedures.
6. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
7. Advise Design personnel regarding company drawing and design practices and procedures.
8. Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
9. Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
10. Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
11. Knowledge of company parts list & PdocM, a plus.
12. Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
1. Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
2. Ensures designs meet customer criteria, quality standards and FAA requirements.
3. Adheres to budget and project schedules.
4. Provides design guidance and feedback to other engineering personnel.
5. Other duties as assigned.
6. Knowledge of industry design and documentation standards.
7. Experience with mechanical assemblies and manufacturing technique design.
8. Ability to work independently and cross-functionally.
9. Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills.
10. Knowledge of Excel, Share Point software, Microsoft Office a plus

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-191
Job Location: Savannah, GA
Rate: $50.00 - $55.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 12/12/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Electrical

Description:
ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Research aircraft systems and components as necessary to perform assignments.
• Design and develop engineering solutions in support of innovative concepts, and the replication and modification of existing electrical and electromechanical designs.
• Develop, analyze, and substantiate low to high complex repair solutions for mitigating all kinds of electrical issues.
• Provide design and repair engineering assistance in support of mechanical and composite projects when assigned.
• Create technical documents for certification, maintenance and operation of various types of projects.
• Produce structural, technical and sometimes market analysis for which FAA approval can be obtained to ensure compliance with all appropriate regulatory, customer, OEM, production and management requirements.
• Create various types of engineering drawings using common CAD software such as AutoCAD and SolidWorks.
• Perform mechanical and electrical assembly when assigned.
• Ensure all applicable customer, OEM, FAA, and maintenance requirements are met.
• Approve engineering documents within authorized signatory level.
• Train and assist other engineers in performance of their assigned tasks.
• Participate in the development of work statements and hour estimates in support of project proposals.
• Represent company on engineering technical matters with OEM’s, customers, operators and regulatory authorities.
• Interact in a professional manner with members of internal and external organizations.
• Independently evaluate, select, and adapt to situations. Modify techniques, procedures and criteria to solve problems encountered.
• Monitor and approve engineering use of Customer, OEM, and other technical data to ensure compliance with all appropriate regulations and requirements.
• Ensure projects are accomplished within a reasonable time frame as defined by a Project Lead or Engineering Management.
 
Job Location: Everett, WA
Input Date: 09/07/2017
Firm Name: APA SERVICES
Attention: Kami M Muehlberger
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

Designer 3 - VA

Description:
RESPONSIBILITIES:
Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA. Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications.
Leveling Factors:
Knowledge
Considerable Full knowledge of the job. Substantial acquaintance with and understanding of general aspects of the job with a broad understanding of the detailed aspects of the job.
Supervision Given and Received
Direct General supervision and instructions given for routine work and detailed instructions given for new activities or special assignments.
Typical Duties and Tasks
Duties & tasks are varied but standardized. Performs some more advanced functions. Resolves routine questions and problems, and refers more complex questions to higher levels.
Consequence of Errors
Errors may be detected and corrected but may cause moderate loss of time or customer/user dissatisfaction.
Contacts
Contacts are typically with individuals within own department and occasionally with contacts outside own organization. Contacts involve obtaining or providing information or data requiring some explanation or interpretation.
Hours given as first shift, 7:30 a.m. - 4:00 p.m. Location: Newport News, VA 23607.

REQUIRED EXPERIENCE:
Requires at least 1 year of relevant experience.
Requires prior experience in 3D product model and piping drawings.
Not looking for candidates who predominantly perform drafting assignments.

EDUCATION:
Requires an AA or other 2 year technical degree in related discipline from an accredited institution.
 
Job Number: 159258
Job Location: Newport News, VA
Rate: $23.2 to $31.15 DOE
Duration: 6 Months
Input Date: 12/11/2017
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

Designer 4 - MS

Description:
Chipton-Ross is seeking a Designer 4 for an opening in Pascagoula, MS

RESPONSIBILITIES:
Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or AutoCAD. Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications. Exclude classifications in which incumbents predominantly perform drafting assignments.

Successful candidate will possess an extensive knowledge in specialized functions and a wide and comprehensive acquaintance with, and understanding of, both general and specific aspects of the job and their practical application to complex problems and situations ordinarily encountered.

Successful candidate will be able to work with minimal supervision. Work may be done without established procedures. May assist in orienting, training, assigning and checking the work of lower level employees and will often be designated as lead worker.

Typical duties and tasks are varied and complex. Serves as a resource to others in the resolution of problems and issues. Contacts are frequent with individuals representing outside organizations, and/or individuals of significant importance within the company. Contacts involve planning and preparation of the communications, require skill, tact, persuasion and/or negotiation to accomplish the objectives of the communication.

Specific duties for Fleet Sustainment Engineering include but are not limited to the development and implementation of Ship Change Documents (SCDs), initiation, development, and review of technical drawings, processing of change paper, supporting technical analyses of mechanical systems, supporting preparation of special studies, and cognizance of specific marine systems and ship alterations.

REQUIRED EXPERIENCE:
High School diploma or equivalent and six (6) years of related design experience or associates degree and three (3) years of related design experience.

EDUCATION:
HS/ GED


 
Job Number: 155940
Job Location: Pascagoula, MS
Rate: $40 to $46.00 DOE
Duration: 1 year
Input Date: 12/11/2017
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafter 4 / Catia V5 V6 Teamcenter CA

Description:
160178/1609
Drafter 4 (Job Number: 17018411)

Number of Openings: 2

Location(s): United States-California-San Diego


Shift: 1st Shift

Target Start Date: Oct 2, 2017

Title: Drafter 4

Rate: $30 - $40/hour

Location: San Diego, CA

Positions: 2 Total

Duration: 6 Months

Shift: 1st Shift - 9/80

Position Summary / Responsibilities
Plans, lays outs, draws, and revises detailed part, assembly, and installation engineering drawings from basic layouts, established references, and standard data in a field of specialization such as structures, devices, mechanics, electrical, or electronics. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA. Completes details of major layout drawings prepared by others in accordance with standard engineering drafting practices. Determines scaling; inserts necessary reference planes, centering and dimension lines, hidden line interpolations, and sectioning; prepares specifications for parts, assemblies, and installations; prepares complete production detail drawings; contributes design modifications to improve quality of product or facilitate manufacturing operations.


Basic Qualifications:

•Experience with Drawing Releases
•Experience with Product Lifecycle Management
•TeamCenter
•AA or other 2 year technical degree in related discipline and 6 years related experience.

Preferred Qualifications:

•CATIA V5/6
•Experience with NG Products (Triton)
•Experience with Commercial Electronics
•19 in. standard rack mounting and computer specification experience
 
Job Number: MB-17018411
Job Location: San Diego, CA
Rate: 30-40 DOE
Duration: 6 month contract
Input Date: 09/28/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafter – CAD/Manufacturing Engineering

Description:
Seeking a Drafter – CAD/Manufacturing Engineering for an opening in Anaheim, CA.

RESPONSIBILITIES:
1. Create 2D Autodesk Inventor views for assembly using the 3D Autodesk Inventor model.
2. Draft 2D Drawings in Inventor and apply GD&T.
3. Develop assembly instructions in Excel and Paint using the 2D Inventor views.
4. Generate Engineering drawings, schematics, wire lists and Bill of Materials of electro-mechanical assemblies.
5. Generate Engineering Change Requests (ECR) in Agile system.
6. Create routers and Kit by Operation in Make-To-Order system (MTO).
-To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

REQUIRED EXPERIENCE:
1. Knowledge of Mil-Specifications.
2. Familiar with military and commercial standards pertaining to hardware, material and processes.
3. Capable of handling multiple projects simultaneously.
4. Knowledge of machine shop practices.
5. Practical Drafting experience required.

-Must have one-year experience in AutoCAD and Autodesk Inventor.
-Must have one-year experience in 2D drafting using GD&T.
-Must have one-year experience in using Excel and Paint.

MATHEMATICAL SKILLS
Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The noise level in the work environment is usually moderate.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80, Full-Time
 
Job Number: 165116
Job Location: Anaheim, CA
Rate: $33.00
Duration: 6 Months
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

Electrical CAD Designer/Drafter

Description:
Overview:
  • Develop system designs and create construction documents for electrical projects using AutoCAD/AutoCAD Electrical.
  • MicroStation would be a plus
  • Work may include single line diagrams, schematics, interconnect diagrams, panel layouts, bill of materials, conduit and cable tray layouts/schedules/fill calculations, and cable and wire interconnection reports.
  • Create drawings for electrical enclosures, equipment, instruments, and installations details.    
  • Complete electrical drawings package under direction from electrical engineering group.

  • Must have strong knowledge and skill with AutoCAD Electrical software.
  • Minimum 3 years AutoCAD drafting experience.
  • MicroStation would be a plus
  • Clear understanding of electrical engineering terminology, codes, and drafting techniques.
  • Familiar with construction processes.
  • Associates Degree in engineering drafting/design or related field.
  • Ability to analyze problems and develop solutions.
  • Ability to clearly communicate technical/non-technical aspects of engineering and construction projects.

 
Job Number: 1710064163
Job Location: Green Bay, WI
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Sue Van Pay
Address: 110 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 920/499-9943
800 Phone: 800/333-1389
Fax Phone: 920/499-9067
Email: cecjgreenbay@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GLU5AAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Must be able to interview in person.

The EE in this position will be responsible for the design, implementation and testing of electrical/electronic systems for new unmanned vehicles. The ideal candidate will participate in requirements and design reviews, translate requirements into electrical designs. The candidate must work well with customers, contractors, and mechanical engineers to effect implementation of system requirements. The EE reports to the Chief Engineering, Program Manager and Technical Director.
Required Skills and Responsibilities:
• Perform studies, trades, and analysis as required to support system requirements and their evolution.
• Electrical circuit design, experience with modifying existing designs or create new designs
• Proficient in electrical CAD tools for schematic capture and PCB layout.
• Knowledge of wire harness design, including selection of connectors, wires and cables.
• Work with designer to lay the cable runs into the CAD model of the airframe.
• Document systems design, systems analysis, system interface design, and systems integration.
• Familiar with embedded board systems design
• Embedded systems and microcontroller implementation and programming
• Knowledge of common data bus standards and implementations.
• Interact with customers regarding new capability implementation and integration into an existing network infrastructure.
• Interface effectively with users, customers, management, and other engineering personnel
• Proven teamwork and interpersonal skills with the ability to act in a mentor role and be an advocate for positive change.
• Possess strong verbal and written communications skills.
• Ability to create and follow standard processes and clearly document results.
• Knowledge of aircraft electrical systems.

Preferred Qualifications:
• Familiar with the Microchip PIC family embedded systems
• Altium Schematic and Board Layout
• UAV/Aircraft Integration and Testing
• Accustomed to working with SAE or DoD standards for aircraft electrical systems.
• Knowledge of power generation and conversion systems.
• Knowledge of airborne communications hardware (standard interfaces and protocols, networking, SATCOM, data links, cellular, etc…

Typical Education/Experience Level 2/3 - Degree and typical experience in engineering classification: 5-9 Years with Bachelors of Science (engineering degree preferred); 3-5 Years with Masters; 10-13 years of experience may be considered in lieu of degree.
 
Job Number: D115
Job Location: Irvine, CA
Rate: $50 - $55
Per Diem: No
Duration: 12 mos
Input Date: 08/30/2017
Firm Name: 804 TECHNOLOGY
Attention: Dwayne Crecelius
Address: 5381 HIGHWAY N STE 201
City, State: COTTLEVILLE, MO 63304
Phone: 636/928-0330
Fax Phone: 636/530-3693
Website: www.804technology.com

Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Duration: 1 year contract
Pay Rate: DOE ($50/hr - $55/hr)
Location: Grand Prairie, TX
Shift: First, 9/80
*The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years)*

Job Description:
-Analog engineer is required to design a power voltage card to convert voltages between mature subsystems.
-The power voltage card will need to fit within an existing space.
-This effort will require part selection, design review, and design release.
-The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-The engineer must be proficient in Cadence; have good communication skills.

Mandatory Skills:
-Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-Bachelors degree in Electrical Engineering with five or more years of experience.
-Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
-Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting.
-Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes.
-Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills.
-Proficiency with electronic analyzers and other trouble shooting tools is required.
-Ability to develop system and subsystem performance requirements.
-Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis.

REQUIRED Skill Matrix:
-Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. : (9-10 years)
 
Job Number: 7065
Job Location: Grand Prairie, TX
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 12/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Electrical Engineer 3 - WA

Description:
Chipton-Ross is seeking an Electrical Engineer 3 located in Bingen, WA

RESPONSIBILITIES:
Client is a leading high-tech autonomous systems company driven by a culture of agility and systematic improvement. Since 1994 Client has led in the design, development and production of small autonomous aircraft for Unmanned Aircraft Systems (UAS). We currently produce and sell an ever growing fleet of Unmanned Aircraft Systems that are low-cost, long-endurance, and have low personnel requirements. These UASs provide a no-runway launch, unprecedented stabilized day and night video for ISR, robotic flight control, and a no-nets capture.
As we continue our rapid growth in the UAS/UAV market we are looking for experienced talent to help us achieve our goal of maintaining the agile and innovative problem-solving capabilities in all the products we offer.

Analyzes, interprets and develops electrical system/subsystem requirements and specifications. Allocates requirements across module-level design elements and conducts trade studies. Performs risk assessments and generates risk mitigation plans and strategies. Decomposes system requirements. Creates electrical system architectures and develops detailed electrical hardware and firmware designs. Establishes electronic hardware interface controls and de-conflicts interface violations. Develops and releases electronic hardware documentation packages. Develops andperforms verification and validation procedures against operational and functional requirements. Conducts testing/analysis of avionics/electrical components, equipment, and systems. Establishes technical performance metrics. Diagnoses operational anomalies and makes design improvements and/or modifications. Participates in Project Design Reviews

REQUIRED EXPERIENCE:
Familiar with Analog, Digital, Power Distribution and EMI/EMC fundamentals-concepts
within circuit design. Familiarity with Rigid PCB technologies (IPC Standards, PCB
fabrication, PCBA Assembly processes and documentation standards, AS9100
standards), Ethernet, RS232 and VeriLog. Familiarization with Flex and Rigid-Flex
Technologies a plus

Specific Experience Required
CAD Tools: Preferred experience with Mentor Graphics DxDesigner, Mentor Graphics
Hyperlinx - Signal Integrity simulation, Power Integrity simulation and Circuit Analysis tools (E.g. LTSpice).
Test and Debug: Mixed Signal Ocilliscope, Spectrum Analyzer, Digital Multi-meter, Programable Load and other test tools.
Other requirements: Proficiency in Word, Excel, PowerPoint, Outlook and Visio.
Programming skills (added bonus): FPGA SOC/microcontroller, Verilog, Embedded-C

EDUCATION:
Accredited BS in Electrical Engineering with a minimum of 10 years of experience or MS in
Electrical engineering with 5 years of experience in electronics hardware design

WORK HOURS:
Full-Time
9/80 work week

 
Job Number: 163959
Job Location: Bingen, WA
Rate: $DOE
Duration: 6-9 MONTHS
Input Date: 12/11/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: daubert@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer II

Description:
PDS Tech is seeking an Electrical Engineer II for an open position in Arlington, TX

In your role, you will:


The Electrical Engineer 2 is responsible for designing and developing the electrical system components on a variety of flight simulator programs. Design responsibilities include creating system wiring diagrams, circuit breaker panels, interface diagrams, power distribution, and other items using CAD tools. The position will work closely with senior level electrical engineers.
 
Duties:
• Provide electrical design and development support on a variety of simulator programs.
• Coordination of design activities with fellow electrical team members, mechanical engineering counterpart, and systems engineering to ensure that designs meet program requirements.
• Support peer reviews for electrical designs.
• Perform and document electrical load analysis.
• Support development of Interface Control Documents (ICD)s.
• Ability to work with a variety of I/O systems.
• Knowledge of both analog and digital component design.
• Support development of hardware subcontractor specifications.

 
As our ideal candidate, you will meet the following requirements:

Qualifications:
• B/S in Electrical Engineering.
• 4+ years of electrical engineering technical experience.
• Experience with CAD software, preference to AutoCAD.
• Systems integration experience.
• Knowledge of FIO, Racktangle, & VMIC I/O is a plus.
• Good computer skills including working knowledge of Microsoft Office.
• Strong communication skills and good team work.
Be able to obtain a DOD security clearance.

Additional requirements: 
Aerospace experience is required.
 
At a minimum resumes should reflect experience with the following within the aerospace industry.
 
•             Design and develop electrical systems on aircraft
•             Produce wiring diagrams using computer aided design
•             Experience with electrical load analysis

 
 
Job Number: 1610060907
Job Location: Arlington, TX
Per Diem: No
Duration: 6 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FyJFAA0&URLSource=cjhunter

Electrical Engineer Level - 3 Secret

Description:
PDS Tech, Inc. is seeking a Electrical Engineer - Level 3 for an open position in Grand Prairie, TX.
Job Description: 

  • Analog engineer is required to design a power voltage card to convert voltages between mature subsystems.
  • The power voltage card will need to fit within an existing space.
  • This effort will require part selection, design review, and design release.
  • The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
  • The engineer must be proficient in Cadence; have good communication skills. 

Mandatory Skills:
  • Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
  • Bachelors degree in Electrical Engineering with five or more years of experience.
  • Circuit Design  Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. 
  • Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
  • Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting.
  • Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes.
  • Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills.
  • Proficiency with electronic analyzers and other trouble shooting tools is required.
  • Ability to develop system and subsystem performance requirements.
  • Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis. 

 
Job Number: 1710063599
Job Location: Grand Prairie, TX
Per Diem: No
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GBUFAA4&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineers - Irvine, CA

Description:
STS AeroStaff Services is hiring Electrical Engineers for open positions in Irvine, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The EE in this position will be responsible for the design, implementation and testing of electrical/electronic systems for new unmanned vehicles. The ideal candidate will participate in requirements and design reviews, translate requirements into electrical designs. The candidate must work well with customers, contractors, and mechanical engineers to effect implementation of system requirements. The EE reports to the Chief Engineering, Program Manager and Technical Director.

Job Duties:

• Perform studies, trades, and analysis as required to support system requirements and their evolution
• Electrical circuit design, experience with modifying existing designs or create new designs
• Proficient in electrical CAD tools for schematic capture and PCB layout
• Knowledge of wire harness design, including selection of connectors, wires and cables
• Work with designer to lay the cable runs into the CAD model of the airframe
• Document systems design, systems analysis, system interface design, and systems integration
• Familiar with embedded board systems design
• Embedded systems and microcontroller implementation and programming
• Knowledge of common data bus standards and implementations
• Interact with customers regarding new capability implementation and integration into an existing network infrastructure
• Interface effectively with users, customers, management, and other engineering personnel
• Proven teamwork and interpersonal skills with the ability to act in a mentor role and be an advocate for positive change
• Possess strong verbal and written communications skills
• Ability to create and follow standard processes and clearly document results
• Knowledge of aircraft electrical systems

Basic Qualifications:

• 5-9 years’ with Bachelors of Science (engineering degree preferred); 3-5 years’ with Masters; 10-13 years’ of experience may be considered in lieu of degree

Preferred Qualifications:

• Familiar with the Microchip PIC family embedded systems
• Altium Schematic and Board Layout
• UAV/Aircraft Integration and Testing
• Accustomed to working with SAE or DoD standards for aircraft electrical systems
• Knowledge of power generation and conversion systems
• Knowledge of airborne communications hardware (standard interfaces and protocols, networking, SATCOM, data links, cellular, etc.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39974
Job Location: Irvine, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Los Angeles area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065207
Job Location: Los Angeles, CA
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJcAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Jose area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065206
Job Location: San Jose, CA
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJXAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Phoenix area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065209
Job Location: Phoenix, AZ
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: David Goodman
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJmAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Diego area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065205
Job Location: San Diego, CA
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJIAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Houston area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065208
Job Location: Houston, TX
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: David Goodman
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJhAAM&URLSource=cjhunter

ElectroMechanical Engr - Level 3 - TX - C

Description:
Chipton-Ross is seeking an ElectroMechanical Engr - Level 3 for an opening in Grand Prairie, TX.

RESPONSIBILITIES:
Client is seeking a Hardware Electro-Mechanical Packaging Design Engineer for a position in Grand Prairie, TX who will be responsible for missile harness design and 3D routing and general packaging support. Activity will require: Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. Research, development and design of components, equipment and networks for military applications. The engineer will be responsible for interfacing with electrical engineers in interpreting system interconnect diagram(s), harness schematics, and providing guidance for improving the layout based on best physical routing practices. The engineer will also be responsible for harness piece-part/component selection to meet interfacing hardware and environmental requirements.

REQUIRED EXPERIENCE:
- Requires 5 or more years of electro-mechanical design experience of airborne avionics, missile and/or ground-based equipment. Design experience should include electrical cable and/or network design and general electro-mechanical design. - Candidate must have experience with cabling / harness design. - The engineer must be proficient with the Pro/Cable module in Creo, have good communication skills, and be able to work with internal and external customers. The ability to work with minimal oversight.

ADDITIONAL EXPERIENCE:
Knowledge of client MFC (Dallas) procedures in CAD modeling and working knowledge of military and / or industry hardware specifications.

EDUCATION:
Bachelors Degree

WORK HOURS:
9/80, 1st Shift, Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.


 
Job Number: 164385
Job Location: Grand Prairie, TX
Rate: Up to $65.00 DOE
Duration: 11 Months
Input Date: 12/11/2017
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ElectroMechanical Engr - Level 3 with active secret TX

Description:
159948
Requirement# MFC-REQ-1432
Work Location GRAND PRAIRIE, TX
Work Week 9/80-A Priority
Needed Date 08/22/2016
End Date 07/05/2018
Number of Resources 1
Security Clearance Secret

Type of Service: Engineering
Title: ElectroMechanical Engr - Level 3

Description
Lockheed Martin is seeking a Hardware Electro-Mechanical Packaging Design Engineer for a position in Grand Prairie, TX who will be responsible for missile harness design and 3D routing and general packaging support. Activity will require: Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. Research, development and design of components, equipment and networks for military applications. The engineer will be responsible for interfacing with electrical engineers in interpreting system interconnect diagram(s), harness schematics, and providing guidance for improving the layout based on best physical routing practices. The engineer will also be responsible for harness piece-part/component selection to meet interfacing hardware and environmental requirements. Clearance status required on resume.
Skill/Experience/Education
Mandatory:

- Requires 5 or more years of electro-mechanical design experience of airborne avionics, missile and/or ground-based equipment. Design experience should include electrical cable and/or network design and general electro-mechanical design. - Candidate must have experience with cabling / harness design. - The engineer must be proficient with the Pro/Cable module in Creo, have good communication skills, and be able to work with internal and external customers. The ability to work with minimal oversight.
Desired:

Knowledge of Lockheed Martin MFC (Dallas) procedures in CAD modeling and working knowledge of military and / or industry hardware specifications.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Electronic Package Design Modeling and Drafting 4-5 Years Yes
Harness Design Pro/Cable (Creo) 4-5 Years Yes



Interview Required Yes
Max Pay Rate 65.00 USD
Shift 1st Shift
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
 
Job Number: JE-1432
Job Location: Grand Prairie, TX
Rate: 65/hr max
Duration: 12 month contract
Input Date: 09/18/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Engineer Logistics - 3

Description:
PDS Tech, Inc. is seeking an Engineer Logistics in Grand Sky, ND.  
  • This individual will perform duties as a Logistics Support Analysis Engineer in the Unmanned Systems portfolio in Emerado, North Dakota.
  • The candidate will identify LSA candidates and maintain the LSA database. 
  • It is expected that the candidate will have knowledge of Relational Databases and an understanding of maintenance in order to integrate the LSA products into the various Logistics disciplines and a firm understanding of the technical principles, theories and concepts of logistics engineering and aircraft design.
  • The candidate will develop and implement technical solutions to logistics problems and maintain an integrated logistics database for cross-functional teams utilizing EAGLE
  • Candidate may assist with coordinating subcontractor and customer interface meetings and the development of IPT deliverables which include but not limited to Maintenance Plans, Task Analysis, and SERDs to satisfy contractual requirements and identify user’s logistic needs.
  • Coordinate, collaborate, and support Product Support IPT activities. 
  • Well versed in integrated databases, spreadsheets, and engineering data capture.
  • Some more advanced responsibilities will include acting in a consultative role to other programs on the development of logistic data sets and supporting proposal development requests across the business area.
  • The ideal candidate will be well versed in integrated databases, spreadsheets, and engineering data capture.
  • Solid presentation building and briefing skills will be expected in order to interact with other Integrated Product Teams and customers.
  • Excellent written and oral communication skills will be needed to develop and defend white papers to describe problem areas with recommended solutions.

Basic Qualifications:


5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.
Relational Database experience using Mil Std 1388.
Must be able to obtain a Secret clearance post start. 

 
Preferred Qualifications:
Prior military aircraft maintenance experience is highly desired, experience with CAD programs such as CATIA and with an LSA database tool such as EAGLE/SLICWave/MIL-STD-1388 and GEIA 0007 STD.
 
Job Number: 1710072503
Job Location: Grand Forks AFB, ND
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023B52AAE&URLSource=cjhunter

Engineer Logistics 3

Description:
PDS Tech, Inc. is seeking a candidate for the  Engineer Logistics-3 position located in in Grand Sky, ND. 
This individual will perform duties as a Logistics Support Analysis Engineer in the Unmanned Systems portfolio in Emerado, North Dakota.
The candidate will identify LSA candidates and maintain the LSA database. 
It is expected that the candidate will have knowledge of Relational Databases and an understanding of maintenance in order to integrate the LSA products into the various Logistics disciplines and a firm understanding of the technical principles, theories and concepts of logistics engineering and aircraft design.
The candidate will develop and implement technical solutions to logistics problems and maintain an integrated logistics database for cross-functional teams utilizing EAGLE

Candidate may assist with coordinating subcontractor and customer interface meetings and the development of IPT deliverables which include but not limited to Maintenance Plans, Task Analysis, and SERDs to satisfy contractual requirements and identify user’s logistic needs.  
Coordinate, collaborate, and support Product Support IPT activities. 
Well versed in integrated databases, spreadsheets, and engineering data capture.
Some more advanced responsibilities will include acting in a consultative role to other programs on the development of logistic data sets and supporting proposal development requests across the business area.
The ideal candidate will be well versed in integrated databases, spreadsheets, and engineering data capture.

 
Solid presentation building and briefing skills will be expected in order to interact with other Integrated Product Teams and customers.
Excellent written and oral communication skills will be needed to develop and defend white papers to describe problem areas with recommended solutions.

Basic Qualifications:


5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.
Relational Database experience using Mil Std 1388.
 
Preferred Qualifications:
Prior military aircraft maintenance experience is highly desired, experience with CAD programs such as CATIA and with an LSA database tool such as EAGLE/SLICWave/MIL-STD-1388 and GEIA 0007 STD.

Preferred Qualifications: Experience with Eagle and working International DOD Programs.
 
Job Number: 1710072504
Job Location: Emerado, ND
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023B57AAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer SolidWorks

Description:
We're seeking a Mechanical Engineer that knows how to use SolidWorks in developing Mirrors, Horns and possibly some interior plastic components too.

Our client is seeking for some immediate help for a few months with a possible extension depending on project load and up coming programs. This position is working on a new program and have an immediate need for a SolidWorks CAD/Design person that is well versed in SolidWorks and have experience in FEA analysis, bills of material, project timing and design of mechanical parts.
 
Job Number: 3475
Job Location: Grandville, MI
Rate: DOE
Per Diem: Possible
Duration: 2+ months
Start Date: ASAP
Input Date: 08/30/2017
Firm Name: OLSA RESOURCES INC
Attention: Dina
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Contractor/Checker

Description:
Engineering Contractor/Checker

Location: Savannah, GA
Pay Rate: $50/hr - $55/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Review 3D engineering data for conformance to Company requirements as directed.
-Check parts for fit, form and function to the extent that information is available.
-Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed.
-Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding Company drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of Company parts list & PdocM, a plus.
• Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.
• Knowledge of Excel, Share Point software, Microsoft Office a plus

Job Description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 7680
Job Location: Savannah, GA
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Engineering Design 1/2 (3) - FL - C

Description:
RESPONSIBILTIES:
Designs major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations. Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal. Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost. Coordinates with other organizations affected by design development. Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures. Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning. Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers.
Design Engineer: Work will involve aerospace mechanical, pneumatic, hydraulic, and electrical subsystem test equipment design.

REQUIRED EXPERIENCE:
Strong CAD skills, proficient in MS Office, must be willing to relocate to Palmdale in approx. 1-2 years.
Level 1 (2 positions): 0 Years with Bachelors in Science Mechanical Engineering
Level 2 (1 Position): 2 Years with Bachelors in Science Mechanical Engineering; 0 Years with Masters Mechanical Engineering.
Preferred Qualifications:
Knowledge of test equipment design a plus, knowledge of aerospace subsystems a plus.

EDUCATION:
Bachelors in Science Mechanical Engineering, or Master's degree.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

HOURS:
9/80 workweek

 
Job Number: 162898
Job Location: Melbourne, FL
Rate: $28 to $40.00 DOE
Duration: 9-12 months
Input Date: 12/17/2017
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Design Checker - Level 2 with Active Secret / Catia FL

Description:
160024
Requirement #MFC-REQ-1450
Work Location Orlando, FL
Work Week 9/80-A
Priority High
Needed Date 09/11/2017
End Date 09/07/2018
Number of Resources 3
Security Clearance Active Secret

Title: Engineering Design Checker - Level 2

Description
Examines engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation. Work with Mechanical Engineering Lead to assist in the mechanical design, engineering documentation, trade studies, and drawing release for the System. Verify tolerance analysis on system components has been performed. Work with designers to ensure the design meets all requirements, including Safety of Flight.

Skill/Experience/Education
Mandatory:

BS degree in Mechanical Engineering, or equivalent related education and experience. Experience with all aspects of mechanical design, including layout, documentation and checking per IAW ASME Y14.24 and be familiar with MIL-T-3100 and MIL-STD-100. 5 to 10 years’ experience of creating Pro-E / CATIA drawings and drawing release. Proficiency with said CAD skills is required. Knowledge of LMC drawing release procedures is desired. Previous LMC experience is a plus.



Max Pay Rate 65.00 USD

Shift 1st Shift
OT Allowed No
Travel No
Non-Exempt
 
Job Number: JE-1450
Job Location: Orlando, FL
Rate: 65/hr max
Duration: 12 month contract
Input Date: 10/03/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Flight Controls Engineer

Description:
PDS Tech is seeking a Flight Controls Engineer for an open position in Nagoya, Japan.

 
  •  
  • B.S. degree in Aerospace Engineering, Mechanical Engineering or related technical degree.
  • Applicable coursework or coop/intern experience to this position desired.
  • Working knowledge of generic CAD design tool processes is desired.
  • Experience with CATIA V6/Enovia – or ability to learn it quickly from V5
  • Experience with Kinematics in CATIA
  • Flight Controls Systems design experience a plus
  • Must have excellent verbal communication and presentation skills.
  • Proficient with Microsoft Office applications including Word and Excel.
  • Professional demeanor, troubleshooting and organizational skills are necessary.
  • International experience desirable. 
  • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

 
Job Number: 1610045561
Job Location: Nagoya,
Duration: 36 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000003BKTAA2&URLSource=cjhunter

GIS/CAD Technician

Description:
PDS Tech, Inc is seeking a candidate for the GIS/CAD Technician position located in Austin, TX.  

If you are interested please email Jill your resume to jmaasberg@pdstech.com. 


Responsible for content analysis, validation, cleansing, collection and reporting.
Analyze and validate data content and assemble new content from various sources, including databases, files/spreadsheets, and websites.
Follow written instructions and data specifications.
Respond to data inquiries from managers. 
Create and publish regularly scheduled and/or ad hoc reports as needed. 
Key Qualifications 
• One to two years experience using GIS software for spatial analysis 
• Background and related coursework in Urban Planning, Architecture, Geography or GIS 
• Database experience with SQL, scripting experience with Python 
• Internet research skills and experience 
Education 
BS/BA or MS/MA in Geography, GIS, Architecture, Urban Planning, Interior Design or Engineering. 
Additional Qualifications 
• Experience with CAD/BIM applications with an emphasis on AutoCAD 
• Good report writing and communication skills 
 
Job Number: 1710072537
Job Location: Austin, TX
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Jill Maasberg
Address: 12708 RIATA VISTA CIR STE A-108
City, State: AUSTIN, TX 78727
Phone: 512/343-0303
800 Phone: 800/917-2841
Email: cecjaustin@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023B8zAAE&URLSource=cjhunter

Industrial & Process Engineers

Description:
CAD, CAM, ERP
 
Job Number: 39385/6
Job Location: Florida
Duration: direct
Input Date: 11/27/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Address: 1700 WELLS RD STE 1
City, State: ORANGE PARK, FL 32073-2373
800 Phone: 866/277-3343
Email: jacksonville@apollopros.com
Website: www.apollopros.com

Industrial Engineer

Description:
General Summary:
The Industrial Engineer leads process optimization efforts to address specific business requirements and to eliminate waste from Assy process, reducing costs, improving quality, and improving customer satisfaction. This position provides technical support for the Production Engineering Group working in areas such as manufacturing, design, development, and testing.
 
Duties and Responsibilities:
  1. Leads process optimization efforts to address specific business requirements and to eliminate waste from Assy processes.
  2. Provides time studies, capacity analysis (manpower, tooling, capital, and facilities), line balancing, and crew loading, work sampling, and PC computer data analysis.
  3. Collects and analyzes data and metrics and presents the information to large audiences.
  4. Establishes manpower requirements, line and sub-assembly balancing data, and expectancy time performances, headcount planning, and budgeting concepts.
  5. Recommends improvements to manufacturing methods and processes including utilization of personnel, material, and utilities.
  6. Provides productivity planning with accompanying future strategies for improvement.
  7. Develops and maintains engineered time standards.
  8. Applies statistical methods and performs mathematical calculations to determine manufacturing assembly processes, labor requirements, and production standards.
  9. Develops and maintains plant standards.
  10. Creates and maintains valve stream maps.
  11. Plans, schedules, and prioritizes work to meet established deadlines.
  12. Drafts and designs layout of equipment, materials, and work centers to optimize material flow, labor efficiency, safety, quality, productivity, and ergonomics.
  13. Determines and improves processes to meet production levels.
  14. Schedules and sequences job plans (with ME approval) to support effective work flow.
  15. Supports work specific to detail parts manufacturing and assembly operations of composite and metallic aerospace hardware within a manufacturing environment.
  16. Develops documentation and procedures to ensure compliance specific to customer and regulatory production requirements and specifications.

Education, Work Experience, Certification and/or Licensure:
  1. Bachelor’s Degree (Manufacturing, Manufacturing Engineering, Industrial Engineering, Aerospace Engineering, Industrial Technology, or equivalent technical major).
  2. 5+ years experience in aerospace industry in aerospace manufacturing.

Knowledge, Skills and Abilities:

  1. Strong analytical and innovative skills.
  2. Strong work ethic.
  3. Ability to multitask.
  4. Ability to work under minimal supervision.
  5. Detail oriented.
  6. Excellent problem solving skills.
  7. Ability to read and interpret engineering drawing and/or specification requirements.
  8. Excellent communication skills, both verbal and written.
  9. Excellent presentation skills.
  10. Strong working knowledge of Microsoft Office Suites (Word, Excel, PowerPoint, and Lotus Notes).
  11. Basic experience utilizing tools such as CATIA, SAP, CAD CAM, and Microsoft Office Suite.
  12. Knowledgeable of various manufacturing principles, engineering practices, mathematics, materials, and physical sciences to review detailed designs and drawings.

Physical Requirements:

  1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  2. Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  4. Read, hear, speak, and see with no restrictions, as required by job duties.
  5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  6. Effectively communicate in Business English language.
  7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.  

 
Job Number: 1710071796
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002390MAAQ&URLSource=cjhunter

Logistic Support Analyst (LSA)

Description:
PDS Tech, Inc. is seeking a candidate for Logistic Support Analyst position located in Shelton, CT.

Responsibilities will consist of the following: 

  • Analyzing engineering source data for impact to O and D level maintenance. 
  • Identifying components to be repaired (Candidate list) including the scheduled and unscheduled tasking. 
  • Performing Level Of Repair Analysis (LORA) and assigning SM&R codes. 
  • Demonstrating high level of interpersonal skills and the ability to communicate professionally with all internal and external customers. 

***This position is strictly for parts coding, the analyst will be assigning SMR codes, MRR1, CBD/CAD, NRTS, ORR and EC codes for an O to D program.*** 
 
  • The Logistic Support Analysis position requires technical knowledge of rotorcraft with experience involving a broad knowledge of Helicopter/Aircraft mechanics, electrical/electronics maintenance and support functions including Data Analysis and Modeling.
  • Familiarity with engineering drawing interpretation, maintainability and reliability principles, assembly and disassembly methods and manufacturing and inspection methods is required.
  • Familiarity with GEIA-0007 data elements and table relationship is desired. 
  • USAF HH-60G Crew Chief or AF technician preferred 
  • Experience in using the IETM preferred 
  • 5+ years H-60 LSA logistician preferred 
  • Proficient working in SAMS or other LMI database such as Eagle, SLICwave or PowerLog 
  • Proficient working in Microsoft excel and word 
  • 5+ years H-60 technical experience preferred 
  • Highly motivated/self-starter 
  • Communication skills (both written and oral) required 
  • Strong organizational skills required 
  • Able to think and operate independently as well as work in a group dynamic


 
 
Job Number: 1710068240
Job Location: Shelton, CT
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Ryan Bushey
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000012bIgAAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Role: Manufacturing Engineer
Location: Cincinnati, OH 45242
Duration: 4 - 6+ months contract

Job Description:
Performs a variety of engineering work in planning, design and modification of fixtures, tools, and manufacturing processes. Resolves production problems and completes documentation on assigned parts. Interfaces with customers as needed. Generally, operates with appreciable latitude for non-reviewed action or decision-making. Has average to above-average knowledge and understanding of Electro-Chemical Machining (ECM) technologies and processes.
• Determines the sequence of operations in the manufacture of parts.
• Prepares and updates routers and operation sheets.
• Researches new manufacturing methods.
• Establishes manufacturing standards.
• Determines and troubleshoots manufacturing processes at all levels of complexity.
• Engineers tools, fixture and gauging modifications.
• Gives technical direction to CAD/CAM, production and inspection personnel as needed.
• Coordinates part inspection procedures with Quality Engineers.
• Addresses and documents cause and corrective action issues to prevent future problem occurrences.
• Interfaces with customers concerning design problems, part prints, etc.
• Performs other duties as assigned by management.

Requirements
• Bachelor’s Degree in mechanical engineering, manufacturing engineering, or equivalent experience and training.
• Minimum of 3 years’ experience (4-7 is preferred) as a Manufacturing Engineer II or the equivalent engineering experience in jet engine manufacturing processes, materials, and designs.
• Thorough knowledge of aerospace manufacturing and quality requirements.
• Average to above-average knowledge and understanding of ECM technologies and processes.
• Demonstrated ability to set up and operate ECM equipment.
• Proficient in the use of word processing, spreadsheet, and data base computer software (i.e. Word, Excel).
• Good interpersonal and communication skills.
 
Job Number: 52291
Job Location: Cincinnati, OH
Rate: open
Per Diem: Yes
Overtime: NO
Duration: 6+ months
Start Date: ASAP
Input Date: 09/11/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Arun
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Hello, my name is Brian Smith and I work for a company called 804 Technology. We are currently looking for 2 Manufacturing Engineers for a 4-6 month contract job opportunity available in Cincinnati OH. The Manufacturing Engineer will performs a variety of engineering work in planning, design and modification of fixtures, tools, and manufacturing processes. Resolves production problems and completes documentation on assigned parts. Interfaces with customers as needed. Generally, operates with appreciable latitude for non-reviewed action or decision-making. Has average to above-average knowledge and understanding of Electro-Chemical Machining (ECM) technologies and processes. If you are interested or know of anyone looking please respond be sending me a resume and your availability. Thank you in advance for your time.

Rate is $50/hour

Brian Smith
636-928-0330
bsmith@804technology.com


2 Manufacturing Engineers
Contract start date asap
4-6 months
Bachelor’s Degree in mechanical engineering, manufacturing engineering, or equivalent experience and training.

Minimum of 3 years’ experience (4-7 is preferred) as a Manufacturing Engineer II or the equivalent engineering experience in jet engine manufacturing processes, materials, and designs.

Thorough knowledge of aerospace manufacturing and quality requirements.
• Average to above-average knowledge and understanding of ECM technologies and processes.
• Demonstrated ability to set up and operate ECM equipment.
• Proficient in the use of word processing, spreadsheet, and data base computer software (i.e. Word, Excel).
• Good interpersonal and communication skills.
2 ME’s with 4-7 years’ experience they will be working with Rolls Royce to implement a new process for parts by the end of the year. Strong customer interaction required. These locations support Engines the lathes and disks. They support Rolls Royce (this project is supporting RR) P&W and GE engines. Mostly commercial with some military exposure, so US Citizen or Green Card holder required.

Performs a variety of engineering work in planning, design and modification of fixtures, tools, and manufacturing processes. Resolves production problems and completes documentation on assigned parts. Interfaces with customers as needed. Generally, operates with appreciable latitude for non-reviewed action or decision-making. Has average to above-average knowledge and understanding of Electro-Chemical Machining (ECM) technologies and processes.

• Determines the sequence of operations in the manufacture of parts.
• Prepares and updates routers and operation sheets. Researches new manufacturing methods.
• Establishes manufacturing standards.
• Determines and troubleshoots manufacturing processes at all levels of complexity.
• Engineers tools, fixture and gauging modifications.
• Gives technical direction to CAD/CAM, production and inspection personnel as needed.
• Coordinates part inspection procedures with Quality Engineers.
• Addresses and documents cause and corrective action issues to prevent future problem occurrences.
• Interfaces with customers concerning design problems, part prints, etc.
• Performs other duties as assigned by management.



Brian Smith
804 Technology
Recruiting Director
O. 636-928-0330
F. 636-928-0348
C. 314-753-5299
bsmith@804technology.com
www.804technology.com

804 Technology is an equal opportunity employer.
All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, disability or national origin.
 
Job Number: 804TechMFG
Job Location: Cincinnati, OH
Rate: $50/hour
Per Diem: Split
Overtime: Possible
Duration: 4-6mos
Start Date: asap
Input Date: 09/07/2017
Firm Name: 804 TECHNOLOGY
Attention: Brian Smith
Address: 5381 HIGHWAY N STE 201
City, State: COTTLEVILLE, MO 63304
Phone: 636/928-0330
Fax Phone: 636/530-3693
Website: www.804technology.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Aerospace

Description:
A Leading Aerospace company, located in Canoga Park, CA, is seeking a Manufacturing Engineer III for a 6+ month contract role.

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Both a phone interview and in-person interview will be required for the selected candidate. Candidates must be able to attend an in-person interview at their own expense **


The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required:

-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.

-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

-5 years of experience required.

Desired:

-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing).
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.

-Project management skills and MS Office applications (Word, Excel).

-Experience with Maestro; Delmia and Windchill.

Keywords:
-Manufacturing Engineer
-Propulsion components

Education:
-BS degree in Manufacturing /Industrial Technology or Engineering required.
 
Job Number: 12287
Job Location: Canoga Park, CA
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 6 Months+
Start Date: October
Input Date: 10/02/2017
Firm Name: LOGIN CONSULTING SERVICES
Attention: Tali Lerea
Address: 300 CONTINENTAL BLVD STE 530
City, State: EL SEGUNDO, CA 90245-5067
Phone: 310/607-9091
Fax Phone: 310/607-9818
Website: www.loginconsult.com

Manufacturing Engineer - Planning

Description:
The Manufacturing Engineer position is responsible for the creation of planning, sequencing and designing.
 
Duties and Responsibilities:
  1. Supports work specific to detail parts manufacturing and assembly operations within a manufacturing environment.
  2. Develops documentation and procedures to ensure compliance specific to customer, and regulatory production requirements and specifications.
  3. Develops solutions for production problems relating to materials, manufacturing processes and/or the right tooling.
  4. Interprets engineering drawings to determine requirements meet objectives. Acts as liaison between design engineering, tooling department, machine shop, metal bond shop, composites and plastics shop, tube shop, manufacturing graphics department, quality and the production floor. 
  5. Analyzes statistical data including process capability studies, tests capability studies, and through-put rates.
  6. Provides technical support and assistance with the development and improvement of methods, quality product design, cost, and technical issues of a complex manner as required.
  7. Plans and documents various installation processes, tooling, equipment and quality control methods to optimize the manufacturing operation.
  8. Ensures completed tasks have been performed and inspected in accordance with company standards.  Identifies and corrects all production and manufacturing issues.
  9. Prepares assembly data sheet and updates planning data sheets.  Assist with BOM identification and control.  Prepares and monitors tool orders and first article inspection sheets.
  10. Details and assembles methods planning and tool manufacturing planning.

 
Education, Experience, Certification and/or Licensure:
  1. Bachelors' degree in Manufacturing Engineer or other related field strongly preferred.
  2. In lieu of education one year of direct aircraft experience potentially may be substituted for each year of college.
  3. 5+ years experience in aerospace industry in aerospace manufacturing.
  4. Six Sigma Training (Minimum Green Belt Certification – highly preferred).

 
Knowledge, Skills and Abilities:

  1. Strong analytical skills.
  2. Ability to read and interpret engineering drawings and/or specifications requirements.
  3. Excellent oral and written communication skills.
  4. Excellent problem solving skills.
  5. Ability to work in a diverse environment.
  6. Excellent communication and presentation skills. 
  7. Some experience utilizing tools such as SAP, CAD CAM, CATIA, Microsoft Office Suites (Word, Excel, PowerPoint, Project and Lotus Notes).
  8. Ability to multitask.
  9. Strong organizational skills.
  10. Working knowledge of aircraft assembly, sequencing and manufacturing flow.
  11. Working knowledge of or exposure to Lean Manufacturing tools.

 
Physical Requirements:

  1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  2. Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  4. Read, hear, speak, and see with no restrictions, as required by job duties.
  5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  6. Effectively communicate in Business English language.
  7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.  

 
Job Number: 1710070393
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000233zFAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 4x10


Unique Skills:
Catia / SAP / SOLUMINA / SmarTeam

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months (18) Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). 2. Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 3. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 4. Author DRDI/DMT rework instructions to support effective corrective actions. 5. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 6. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 7. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 8. Investigate and assist in preparing justification for equipment and facility requests. 9. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. 10. Participate in Design for Manufacturing assessments with Engineering. 11. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 12. Perform audit of co-workers output based on defined requirements and procedures. 13. Must demonstrate knowledge of ME policies and procedures. 14. Incorporate Lean Manufacturing Methodology into existing and future processes. 15. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 16. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 17. Support all Safety, Sustainability and Ergonomic Initiatives. 18. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7886
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 12/04/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
UNIQUE SKILLS
Solumina, CATIA and SAP preferred. Prefer prior experience on live aircraft and/or in environment of aircraft reconfiguration.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


POSITION PURPOSE
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. Author DRDI/DMT rework instructions to support effective corrective actions. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
8. Incorporate Lean Manufacturing Methodology into existing and future processes.
9. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
10. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
11. Support all Safety, Sustainability and Ergonomic Initiatives.
12. Aid in development and maintenance of Business Continuity Plan.

ADDITIONAL FUNCTIONS
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

OTHER REQUIREMENTS
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 17-752-105442
Job Location: Southeast
Rate: $50.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/30/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 4x10


Unique Skills:
SAP - SOLUMINA - CATIA REQUIRED


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7774
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 12/04/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Manufacturing Engineer II

Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 4x10


Unique Skills:
Required: SAP - Catia - Solumina

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7515
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 12/04/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Manufacturing Engineer II

Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
- Solumina, CATIA and SAP preferred. Prefer prior experience on live aircraft and/or in environment of aircraft reconfiguration.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7511
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 12/04/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Engineer II

Description:
PDS Tech is seeking a Manufacturing Engineer II for an open position in Savannah, GA.

Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning). 

Principal Duties and Responsibilities:

Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
8. Incorporate Lean Manufacturing Methodology into existing and future processes.
9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
12. Support all Safety, Sustainability and Ergonomic Initiatives.
13. Aid in development and maintenance of Business Continuity Plan. 

Additional Functions:
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required.
3. Perform other duties as assigned. 

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

 


Education and Experience Requirements:
Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.



Unique Skills:



Must have experience as a floor liaison Mfg. Engineer at an Aerospace OEM. Proficiency in Solumina, Catua, SAP, and Microsoft Office software highly preferred.




PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.


 
Job Number: 1610051893
Job Location: Savannah, GA
Duration: 6 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001siRgAAI&URLSource=cjhunter

Manufacturing Engineer II - 372739

Description:
Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
8. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
12. Support all Safety, Sustainability and Ergonomic Initiatives.
13. Aid in development and maintenance of Business Continuity Plan.
14. Author DRDI/DMT rework instructions to support effective corrective actions.
15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

Additional Functions:
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
Unique Skills:
Solumina, CATIA and SAP preferred. Prefer prior experience on live aircraft and/or in environment of aircraft reconfiguration.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 372739
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 12/16/2017
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Mechanical 2D and 3D Engineering Checker

Description:
Mechanical 2D and 3D Engineering Checker
Savannah, GA
Rate: $55-$63

Unique Skills:

Required Check 2D engineering data and 3D models for conformance to Company requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of GAC parts list & PdocM, a plus. Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Other duties as assigned.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7821
Job Location: Savannah, GA
Rate: $55-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Mechanical Design Engineer - Level 2 - Interim Secret

Description:
PDS Tech, Inc. is seeking a Mechanical Design Engineer - Level 2  for an open position in Orlando, FL.
Job Description: 

  • Selected candidate will perform all Liaison duties for the program.
  • Candidate will closely interact with the Engineering team to ensure all required data is available for new drawing release and document revisions, interact with other functions like manufacturing, and subcontracts to process change requests, set up the Liaison process, track open items via page and line.
  • Selected individual must be proficient in the use of Windchill, Creo and Catia, have excellent verbal, presentation and written skills and be able to work with a diverse team of internal and external customers/suppliers.
  • Must be able to obtain a security clearance.

Mandatory Skills:
  • BS degree in Mechanical Engineering, or equivalent related education and experience.
  • CAD expertise per job description.
  • Knowledge of LMC drawing practices is desired, and previous experience is a plus.
  • Must have Interim Clearence.




 
 
Job Number: 1710072968
Job Location: Orlando, FL
Per Diem: No
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Dale Hightower
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023EfFAAU&URLSource=cjhunter

Mechanical Engineer - Level 2

Description:
Location: Orlando, FL
Rate: $50.00 - $60.00/HR
Duration: 1 year contract
Shift: 1st Shift

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or have had one within the last 2 years**

Job Description:
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- Selected candidate will perform all Liaison duties for the program.
- Candidate will closely interact with the Engineering team to ensure all required data is available for new drawing release and document revisions, interact with other functions like manufacturing, and subcontracts to process change requests, set up the Liaison process, track open items via page and line. - Selected individual must be proficient in the use of Windchill, Creo and Catia, have excellent verbal, presentation and written skills and be able to work with a diverse team of internal and external customers/suppliers.

Skill/Experience/Education
Mandatory:
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- BS degree in Mechanical Engineering, or equivalent related education and experience.
- CAD expertise per job description (Windchill, CREO and Catia).
- Knowledge of LMC drawing practices is desired, and previous LMC experience is a plus.
 
Job Number: 7844
Job Location: Orlando, FL
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 12/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Mechanical Engineer - Level 2 - FL - C

Description:
Chipton-Ross is seeking a Mechanical Engineer - Level 2 for an opening in Orlando, FL.

RESPONSIBILITIES:
Selected candidate will perform all Liaison duties for the program. Candidate will closely interact with the Engineering team to ensure all required data is available for new drawing release and document revisions, interact with other functions like manufacturing, and subcontracts to process change requests, set up the Liaison process, track open items via page and line. Selected individual must be proficient in the use of Windchill, Creo and Catia, have excellent verbal, presentation and written skills and be able to work with a diverse team of internal and external customers/suppliers.

REQUIRED EXPERIENCE:
CAD expertise per job description.

PREFERRED EXPERIENCE:
Knowledge of LMC drawing practices is desired, and previous LMC experience is a plus.

EDUCATION:
BS degree in Mechanical Engineering, or equivalent related education and experience.

WORK HOURS:
9/80, 1st Shift, Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 165044
Job Location: Orlando, FL
Rate: Up to $60.00 DOE
Duration: 12 Months
Input Date: 12/11/2017
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Level 2 with active secret / Windchill Creo and Catia FL

Description:
160232
Requirement #MFC-REQ-1478
Work Location Orlando, FL
Work Week 9/80
Needed Date 10/02/2017
End Date 10/02/2018
Number of Resources 1
Security Clearance Secret

Title:Mechanical Engineer - Level 2

Description
Selected candidate will perform all Liaison duties for the program. Candidate will closely interact with the Engineering team to ensure all required data is available for new drawing release and document revisions, interact with other functions like manufacturing, and subcontracts to process change requests, set up the Liaison process, track open items via page and line. Selected individual must be proficient in the use of Windchill, Creo and Catia, have excellent verbal, presentation and written skills and be able to work with a diverse team of internal and external customers/suppliers. Must be able to obtain a security clearance.

Skill/Experience/Education
Mandatory:

BS degree in Mechanical Engineering, or equivalent related education and experience. CAD expertise per job description. Knowledge of LMC drawing practices is desired, and previous LMC experience is a plus. Must have a security clearance.



Max Pay Rate 60.00 USD

Shift 1st Shift
OT Allowed No
Travel No
Non-Exempt
 
Job Number: JE-1478
Job Location: Orlando, FL
Rate: 60/hr max
Duration: 12 month contract
Input Date: 10/03/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mfg Eng II

Description:
Unique Skills:
Catia / SAP / SOLUMINA / SmarTeam preferred

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 116584
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 09/27/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: SUITE 200
5051 PEACHTREE CORNERS CIR

City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mfg Eng II 

Description:
Unique Skills:
SAP - SOLUMINA - CATIA REQUIRED

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 113869
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 09/15/2017
Firm Name: INTERGEN GROUP
Attention: Kim mason
Address: SUITE 200
5051 PEACHTREE CORNERS CIR

City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX 3D Wire Harness Routing

Description:
Job Title: NX 3D Wire Harness Routing
Location: Portland, OR 97217
Duration: 12+ Months

JOB FUNCTIONS
• Design and develop vehicle components and systems using Siemens NX CAD..
• Coordinate and execute the packaging development and documentation for all Mechatronics owned electrical /electronic devices and their mounting systems.
• Create and maintain detailed part and assembly drawings.
• Assist with selection of proper materials, tolerances, finishes, fasteners and production methods.
• Analyze and provide creative, technically sound solutions to problems encountered in validation and production.
• Apply Client and industry drafting and design standards, including GD&T.

BASIC QUALIFICATIONS
• Mechanical or Electrical Engineering degree or related engineering degree preferred but not required.
• Siemens NX CAD experience preferred.
• CHS Capital Harness experience preferred.
• Previous electrical and electronics packaging experience preferred.
• A general knowledge of automotive systems preferred.
• Excellent verbal and written communication skills, as well as personal computer office automation skills are required.
 
Job Number: 3312
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 09/05/2017
Firm Name: OLSA RESOURCES INC
Attention: Sarabjit Saxena
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX CAD Designers - Studio Prototype Concept Vehicle Development

Description:
Job Title: NX CAD Designers - Studio Prototype Concept Vehicle Development
Location: Portland, OR 97217
Duration: 1 – 2 Years

JOB DETAILS
• Candidates must know how to design and develop conceptual body panels and components using NX 9 or higher. This position is working with the conceptual development group for a heavy truck manufacturer. Must have knowledge how to create prototype parts such as; body panels, fairing, hoods, grilles and so on, that will be mounted onto the body, chassis etc. by the use of sheet metal brackets that may be bounded or riveted onto the concept panels then mounted onto the vehicle and be able to hold up during drive test.
• Must have experience creating press brake brackets, fiberglass layup. Have good packaging skills. Create concept and feasibility studies on how to mount these conceptual parts onto the vehicle. This is an awesome position developing conceptual vehicles with the latest vehicle technology to be introduced at shows and clients around the united states. Be a part of this awesome team.

AREAS OF DESIGN
• Body-in-White
• Fairings
• Grilles
• Exterior Components

QUALIFICATIONS:
• Minimum of 2 years of experience in Studio Prototype Design Engineering
• Create concept body panels and other exterior components
• Have knowledge of fiberglass layout and other rapid prototype processes
• Experience in mechanical design
• Create ways to mount these conceptual prototype parts onto the body and frame.
• Have good oral and written communication skills
• Strong interpersonal and leadership skills
• Understanding of prototype processes to make components
• PDM. Product Data Management system experience. Team Center etc.

EDUCATION:
• Bachelor’s degree and 2+ years’ experience with studio prototype concept builds
• Associates degree and 4+ years’ experience with studio prototype concept builds
• Certifications 5+ years’ experience with studio prototype concept builds
 
Job Number: 3340
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 1-2 Years
Start Date: ASAP
Input Date: 09/05/2017
Firm Name: OLSA RESOURCES INC
Attention: Sarabjit Saxena
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PCB Designer

Description:
PCB Designer

Location: York, PA
Duration: 18 months with possible Contract to hire

Description:
The PCB (Printed Circuit Board) Designer position performs schematic capture, layout and implementation of design rules on PCBs of varying complexity. The proper PCB tools are applied to ensure that the board functions as expected with reference to specific requirements.

Responsibilities:
- Develop electronic PCB component library figures.
- Understand electronic symbols and how they interconnect to each other.
- Prepare layouts and component placement based on design rules and processes.
- Prepare assembly drawings and BOMs.
- Be able to gain a quick understanding of documentation structure and applicable processes.
- Demonstrate basic knowledge of PCB manufacturing processes.
- Work with PCB manufacturing and engineering to develop/revise PCB processes to ensure quality.
- Provide direction and training to and check work of less experienced PCB tool users.
- Possess enough knowledge of Pro-E to provide 3-D conversion from PCB layout tool.

Qualifications:
- Should have at least 8 years of Printed Circuit Board (PCB) schematic capture/Layout experience in Mentor (DX Designer, Expedition and Hyperlinx) and/or P-CAD, preferably in the area of embedded systems.
- Should possess a two year technical or associate degree in a related field.
- Experience in the use of Theda is desirable.
- Requires a self-assertive individual that will take the initiative to quickly gain product knowledge and be able to apply that knowledge with minimal direction.
- Self-motivated, team oriented individual who can work independently and can multiplex several tasks.
- Maintain focus on project schedules and follow through to meet them.
- Proficient in the use of Microsoft tools such as Excel, Word, etc.

If interested then please send updated resume at ravi@iconma.com
 
Job Number: 17-15986
Job Location: York,, PA
Input Date: 09/28/2017
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Pneumatics Design Engineer

Description:
We're looking for candidates with 2-5 years of experience.

Duties and Responsibilities may include, but are not limited to:

Conceptual design, structural layout, sizing, and detail design
System analysis including flow, thermal expansion, and pressurization effects
Stress analysis
System attach / interface to the aircraft
Supporting ground and flight test planning, test execution, and aircraft modifications
Required:

A strong understanding of the theory and practical application of mechanical systems, structure, and performance
An understanding of the basics of composite construction and assembly
Strong problem solving, organizational, and communication skills
Proficiency in 3D CAD
Ability to work in multiple engineering disciplines on an aggressive schedule
A minimum of three years of directly related work experience
Bachelor of Science in a relevant engineering discipline from an accredited institution
Desired:

Proficiency in Catia V5 or Solidworks
Rapid prototyping experience
Aircraft homebuilding experience or other hands-on design or build experience
Additional degrees or additional relevant work experience
Essential job functions:

Occasionally required to stand, walk and sit for prolonged periods of time
Manual dexterity and coordination are required (e.g., to operate computer keyboard)
Requires mobility (e.g., climb stairs, balance, stoop, kneel, crouch or crawl)
Requires the ability to bend and reach
Occasionally lift and/or move up to 25 pounds
Vision at close distances and the ability to adjust focus
 
Job Number: 52170
Job Location: Mojave, CA
Per Diem: Yes
Duration: 12 months plus
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Principal Web Developer

Description:
PDS Tech is seeking a Principal Web Developer in Melville, NY

Work with the engineering team members to identify the technical requirements for the product and create technical user stories 

Implement defect free, highly scalable code and corresponding unit tests 

Be part of an Agile team to deliver software to the production environment on a sprint cadence 
Basic Qualifications: 



Bachelor degree in Computer Science or related field of Engineering 

1+ years of hands on experience with any public cloud including Microsoft Azure, Amazon Elastic Cloud, AWS, Cloud Foundry, GE Predix, Ayla IoT platform, IBM bluemix or other relevant IoT cloud 

3+ years experience designing and developing software for the web/cloud 

5+ years experience in web based software development with any relational/non-relational database. 



Preferred Qualifications: 

Strong skills in designing and implementing SOA based software. 

Strong understanding of REST and SOAP standards. 

Strong understanding of ASP.NET framework 3.5 and above, C# and data interchange standards including XML, JSON. 

Strong background in OOD Architectural software programming, general network communication protocols like TCP/IP, file systems and database access. 

Good experience with Microsoft Visual Studio 2010 or 2012 with Microsoft Entity Framework, or Microsoft NuGets. 

Hands on experience with powershell, Azure Resource Manager (or equivalent technology) and Octopus automated deployment 

Hands on Experience with Azure microservices including Cloud services, Worker roles, IoT Hub and Service Fabric clusters 

Understanding of No SQL databases and its trade-offs 

Strong understanding of writing secure applications using security solutions like Active Directory, OAuth.
 
Job Number: 1610059320
Job Location: Melville, NY
Duration: 5 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FosTAAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principle Mechanical Engineer

Description:
US Citizen

Structural Design and Analysis Subsea
Electro-optic Fabrication and Packaging
Thermal, Vibration and Shock analysis of Electronic Packages
Engineering Drawing and CAD/CAE Skills
Corrosion Engineering / Prevention Systems
 
Job Number: 40591
Job Location: NJ
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 08/31/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SW Engineer Software Embedded systems

Description:
Programming Languages: C, C++, and C# CM Tools: Perforce, GIT, Accurev, Source Integrity Compilers: VxWorks, Unix, Lynx.OS, Visual Studio IDEs: Workbench, Eclipse, Visual Studio Technical Degree - Electrical, Computer Engineer or Computer Science

Work as a Lead of a Radar System Software development team to develop Command and Control Interfaces, Real-time system control code, Radar Subsystem development, Range Control System and Graphics Package development. Candidate will develop code and unit tests to a documented design. In addition to the above activities the candidate will assist in other basic Software Engineering activities such as code reviews, and Software configuration management. This requisition will be specific to working on Radar Signal Processor Development. The candidate should have move real-time symmetrical multi-processing experience with VWorks.
 
Job Number: 2361
Job Location: Multiple locations
Rate: Open
Per Diem: Yes/Split
Duration: 6-12 Months
Start Date: TBA
Input Date: 10/13/2017
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

Project Engineer / Component Product Engineer II - III (Valves & Actuators) CA

Description:
160214/7333750
Job Title: Project Engineer / Component Product Engineer II - III (Valves & Actuators)

Number of Positions: 2

5 to 10 years of experience

Duties: ** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** This is NOT a Designer role. Please make sure that all candidates with a Designer background or expectation are aware of this **

** Manager likes to see college GPA's on resumes **


-Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.

Skills: -Experience with liquid rocket propulsion systems desired.
-Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.
-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.
-Demonstrated leadership skills are highly desireable.
Education: BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 3 years experience in related field. MSME/AE degree is highly desireable.



Skills: Required
• PROJECT ENGINEER
• COMPONENT ENGINEERING

State/Province: California
City/Town: Canoga Park



Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 03/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7333750
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 6 month contract
Input Date: 12/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Project Engineer II/III

Description:
Location: Canoga Park, CA
Rate: $40.00 - $55.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
- Position is for a development engineer in support of development of rocket engine combustion devices hardware (injectors, combustion chambers, nozzles, igniters).
- Responsibilities include design support, trade studies, hardware development, specification preparation and release, fabrication support; test planning, vendor/supplier integration and coordination.
- Supports combustion devices hardware through the entire product life cycle.
- Analyzes and verifies product design and performance for adequacy and reliability.
- Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
- Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.


Skills:
- General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering.
- Ability to read and interpret blueprints, technical drawings and specifications;
- Ability to communicate clearly and concisely;
- May require the use of engineering test equipment, CAD, and/or various computer systems.
- Ability to operate effectively in a team environment.


Education:
- Bachelor’s degree in an appropriate discipline/science and two (2) years directly related experience as an associate engineer or equivalent combination of education and experience.
 
Job Number: 7818
Job Location: Canoga Park, CA
Rate: $40.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 12/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Project Engineer II/III / engineering degree required CA

Description:
160212/7333291

Job Title: Project Engineer II/III
Need degreed engineer
55/hr max

6 openings

Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Position is for a development engineer in support of development of rocket engine combustion devices hardware (injectors, combustion chambers, nozzles, ignitors).
Responsibilities include design support, trade studies, hardware development, specification preparation and release, fabrication support, test planning, vendor/supplier integration and coordination.
Supports combustion devices hardware through the entire product life cycle.
Analyzes and verifies product design and performance for adequacy and reliability.
Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.


Skills:
General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering.
Ability to read and interpret blueprints, technical drawings and specifications; Ability to communicate clearly and concisely; May require the use of engineering test equipment, CAD, and/or various computer systems.
Ability to operate effectively in a team environment.

Keywords:
Education:
Bachelor's degree in an appropriate discipline/science and two years directly related experience as an associate engineer or equivalent combination of education and experience.

Skills and Experience:
Required Skills:
PROJECT ENGINEER
COMPONENT ENGINEERING

# of Positions: 1

Location:
Canoga Park, CA

Schedule:
Start Date: 09/11/2017
Estimated End Date: 03/11/2018
Hours Per Week: 40.00
Hours Per Day: 8.00
Standard Schedule:
Schedule Notes: Regular 40 hour week. OT possible.
 
Job Number: MB-7333291
Job Location: Canoga Park, CA
Rate: 55//hr max
Duration: 6 month contract
Input Date: 12/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Project Engineer/Component Product Engineer II-III (Valves & Acutators

Description:
Location: Canoga Park, CA
Rate: $35.00 - $45.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** This is NOT a Designer role**
-Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.


Skills:
-Experience with liquid rocket propulsion systems desired.
-Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.
-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.
-Demonstrated leadership skills are highly desireable.

Education:
BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 5 - 10 years experience in related field. MSME/AE degree is highly desireable.
 
Job Number: 7823
Job Location: Canoga Park, CA
Rate: $35.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 12/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Mechanical Designers - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring Senior Mechanical Designers for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

To develop engineered solutions using an established CAD system from concept through 3-D design and 2-D detailing of tooling for the manufacturing sector in automotive (body-in-white and powertrain), aerospace, construction and forestry industries. To coordinate design and engineering communications and closely work with proposal and estimating, project management, purchasing, manufacturing operations, quality, field service, aftermarket sales and documentation departments.

Job Duties:

• Construct and modify CAD models per customer CAD standards using one or more of the following systems: Catia, Unigrahics, FIDES, AutoCad, Inventor, and Solidworks
• Estimate design hours for tool concept to design and release for original content as well as changes
• Prepare layout and detail drawings of design as required to project timelines
• Develop creative and innovative engineered solutions that meet or exceed customer requirements
• Review and study customer specifications, engineering schematics and other data in order to determine the design procedures needed to generate and release digital and/or hardcopy printouts related to the engineering and manufacturing requirements
• Perform necessary engineering calculations and proper material selection to satisfy the required design functionality
• Coordinate any structural and/or finite element analysis that need to be performed for assessing the functionality of the tools designed
• Coordinate the development of part drawings, including CAD drawings, through other designers, internal or outsourced, to comprehensively manage the complete design of the tools that are assigned
• Meet and review design details and function with customer engineer and designer per Quality Stage Gate requirements as stipulated by customer for design reviews
• Work effectively to project budgets and timelines, with constant awareness to design within the project budget constraints
• Work closely with customer engineer and/or designer on design changes to improve manufacturability, maintainability and serviceability of equipment
• Verify the completeness and the accuracy of the CAD model and data before final release of the drawings for purchasing or fabrication and before final storage of the data for future retrieval, with significant prior expertise and experience in checking detail drawings for the manufacturing tooling industry
• Be knowledgeable of the release systems and procedures, and release all the necessary detail drawings in digital and/or hardcopy formats per established requirements of the internal and external customers (for example release to purchasing for make/buy decision, input for controls design and engineering, and documents to support field installation and service personnel, direct digital transfers to customer systems)
• Possess general awareness of Geometric Dimensioning and Tolerancing (GD&T) concepts and its application in manufacturing and assembly sectors in automotive, aerospace, construction and forestry industries
• Be knowledgeable about the FMEA, 8-D and structural analysis (FEA) performed on the tools and/or the process stations using the tool(s) assigned. Initiate ideas and coordinate efforts for continuous improvement of product/tool and process

Qualifications:

• A Bachelor of Applied Science or Mechanical Engineering degree or equivalent from a recognized University is preferred or an Associate Degree/Engineering Diploma, preferably with a specialization in design and drafting, from a recognized Community College or equivalent experience as assessed by the Hiring Manager
• Specialized training with certifications where applicable from recognized training organizations, in the use of CAD systems and software, such Catia, Unigrahics, FIDES, AutoCad, Inventor, Solidwork
• A minimum of 10 years of direct experience and demonstrated capabilities in concepting, 3-D designing and 2-d detailing by consistently using one or more of the above mentioned CAD systems for the design of manufacturing and assembly tooling, which include geo, respot, end-of-arm tooling, etc.
• Experience in one or more of the following industries is a must – automotive, aerospace, construction and forestry vehicles/equipment manufacturing industries
• In the automotive manufacturing industry, specific experience focused in any one or more of the following areas is highly recommended: body-in-white welding and assembly, closure hanging, powertrain manufacturing and assembly (including machining and assembly automation, material handling systems, component washers, leak-testers, functional testing machines), final assembly, or material handling in manufacturing plants
• Leadership abilities in coordinating design related tasks among peers, Junior Designer inside the Company or from engineering design outsource agencies and holding them accountable to deliver on time per the project timeline and ensuring quality of CAD data
• Ability to effectively prioritize and execute tasks in a high pressure environment including following on tool s during the fabrication, build installation and commissioning phases of the project
• Ability and willingness to travel to any of the customer and Company’s work locations in North America, Europe and Asia, as required by Management
• Must be willing to work extended hours, when necessary, including overtime, weekends and holidays and on night shift, as project and customer demands dictate
• Excellent interpersonal, written and verbal communication skills
• Ability to work with others, including peers and personnel in other departments
• Eligibility for clearance under the Canadian Controlled Goods and the American ITAR requirements

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39986
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Technical Writers - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring Senior Technical Writers for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Prepare written text describing the operation, maintenance, calibration and/or repair of Welding and Assembly systems and related equipment
• Construct and/or edit 2D(line) and 3D(solid) illustrations from native CAD models, ”.jt” files, photographs, and other equipment supplier references
• Prepare Spare Parts Lists from mechanical and controls bills-of-material (BOMs), OEM catalog references, and other published data sources
• Develop, edit and maintain various industrial placards (ECPL, Lubrication, Maintenance, etc.,) single point / one point lessons, work instructions, job aids
• Create illustrations, charts, graphs, slides, etc., using Microsoft PowerPoint to support Sales, Engineering, Estimating and Training proposals and presentations
• Develop project “Buy-Off” manuals: prepare content-specific check sheets, inspection reports, OEM equipment signoff statements and other customer defined templates
• Shoot, enhance and edit digital photographs of equipment and products
• Edit raw digital video files rendering them as 30fps “still frame” animations for use in engineering reports

Qualifications:

• A 4-year degree in English, communication arts, illustration, digital publishing, graphic design, language arts or technical writing is strongly preferred
• Equivalent experience in the practical maintenance of manufacturing equipment and/or industrial controls may be considered. (Minimum of Associate Degree is also required)
• Minimum of 7 years of experience in automotive industry with a focus on tooling and with increasing responsibilities, including leadership roles is required
• 5 years of publication / illustration experience
• Development of Operator and/or Skilled Trades training material
• Proficient in MS Office 2010 applications, Adobe Creative Cloud applications (Photoshop, etc.)Adobe Premiere Elements
• Proficient in the use of AutoCAD (2D)
• Familiarity with manufacturing process of suppliers and customers (welding, riveting, structural joining, etc.) is helpful
• Work with subject matter experts who will provide knowledge transfer to enable appropriate course content and lab scenarios with functional results
• Strong organizational skills, note taking, writing and verbal skills
• Ability to work independently, and handle stress in a fast paced, multi-task oriented atmosphere

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39987
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Project/Design Engineer - WI

Description:
Chipton Ross is seeking a Sr. TCO Engineer in Milwaukee, WI.

Job Description:
As a Senior TCO Engineer, reporting to the FLC Engineering Director, you will lead cross-functional project teams in Mortara to complete design engineering and/or supply chain consolidation projects from planning through implementation. You will also perform mechanical engineering activities related to your projects.

Responsibilities:
o Project Scoping & Planning
o General Project Management (forming project teams, budgeting, assigning & tracking
tasks, identify & mitigating project risks, etc.)
o Update mechanical CAD drawings using Pro-E
o Review of Design Inputs and Outputs
o Evaluating and Applying Regulatory Standards
o Lean and Continuous Improvement Initiatives
o Manage one engineer
o Performs other duties as requested
Requirements:
o 5-10 years of applied project management experience
o Experience as a team lead managing multiple projects and coordinating activities (schedules, resource, budgets, etc.) between multiple project managers, preferred.
o The ability to analyze, modify and create mechanical designs is a plus
o Applied experience with Microsoft Project as well as other Office Suite applications
o Prior SAP experience preferred (including DIRs, BOMs, MMDS, and Engineering Changes)
o Demonstrated ability to communicate and negotiate with a diverse group of cross-functional stakeholders in Marketing, R&D, QA, Regulatory, Sourcing, and Operations.
o Well-versed in Medical Device Design Controls.
o Strong communication skills and attention to details
o Ability to lead and coach other team members in the spirit of cross functionality
Education:
o Bachelor's degree in Engineering\
Schedule:
Must be available to work any shift.

 
Job Number: 164867
Job Location: Milwaukee, WI
Rate: $42.65 to $52.94 DOE
Duration: 6 months
Input Date: 12/17/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: daubert@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Avionic-Mechanical Design Engineer

Description:
TOOLS
Inventor (3D Modeling)

INTAKE NOTES
Looking for Avio Mechanical Design Engineer with heavy mechanical experience and some electrical exposure. Familiar with 3D modeling using Inventor or Solidworks, Catia is ok (not preferred). Must have aircraft hardware experience such as; honeycomb panels, potted inserts (screw into panel), sheet metal design, understanding of aircraft separation design/requirements. We basically need a CAD jockey for 6 months.


JOB DESCRIPTION
Responsible for the design and oversight of the wire installation, operation and maintenance of electrical components, equipment and systems.
· Develops and maintains aircraft electrical equipment installations, concepts and designs.
· Interfaces with engineering leads to resolve design issues, captures changes and closes out designs to meet schedule and budget targets.
· Supports installation of electrical systems via liaison with modification facility, identifies root cause issues, captures redline updates, resolves design issues and updates drawings to meet schedule.
· Prepares and analyzes electrical system layouts and performs design reviews.
· Documents processes, specifications and procedures that support the design and manufacture of electrical commodities.
· Designs the installation of electrical components, equipment and systems with maintenance and operational functionality in mind.
· Utilizes 3D CAD (Inventor) installations of electrical components to meet requirements.
· Bachelor's degree (B.S.) in Aerospace or Electrical engineering desired, minimum of five years relevant aerospace experience or equivalent combination of education and experience. Aircraft interior and/or VIP retro-fit experience preferred.
· Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

IN-DEPTH KNOWLEDGE, SKILLS, AND ABILITIES FOR THIS ROLE INCLUDE:
· Proven proficiency in 3D Inventor for design and development of aircraft wire routing drawings for shipside and monuments to latest FAA design standards to meet customer requirements.
· Understands wire schematics, system block diagrams and topologies.
· Extensive technical knowledge of Boeing aircraft for VIP and/or commercial models.
· Strong working knowledge of My Boeing Fleet for OEM data sets.
· Thorough knowledge of equipment installation.
· Understanding of the certification and electrical design process.
· Ability to trouble-shoot electrical systems.
· Competent user of CAD and data management systems.
· Must be able to provide layouts and program design reviews.
 
Job Number: 17-744
Job Location: Northwest
Rate: Open
Per Diem: SPlit
Overtime: Possible
Duration: 6 mths
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Avionics Systems Design Engineer

Description:
TOOLS
Visual Engineer (V.E.)

INTAKE NOTES
We need an electrical systems engineer with VE background to hit the ground running. Engineer will design wire diagrams/schematics for IFE, power supply, and lighting for aircraft interiors retrofit, not OEM. I am not looking for an OEM person.

JOB DESCRIPTION
Creates advanced designs of avionics to include cabin system components, in-flight entertainment, communication systems, LED cabin lighting, AC/DC power systems and products to meet customer criteria, design quality standards, FAA requirements, budget and project schedules.

ESSENTIAL DUTIES AND RESPONSIBILITIES
• Defines avionics and electrical system architecture requirements, definition, system and sub-system aircraft integration for VIP/VVIP aircraft platforms.
• Develops aircraft integration design solutions utilizing engineering drafting tools for avionics and electrical aircraft interiors, system components and support aircraft installations and testing.
• Interfaces with engineering leads to resolve design issues, captures changes and closes out designs to meet schedule and budget targets.
• Supports installation of systems via liaison with modification facility, identifies root cause issues, captures redline updates, resolves design issues and updates drawings to meet schedule.
• Develops verification and test procedures, ground and flight test procedures and interfaces with FAA designees to incorporate compliance with the latest FAA design guidance requirements.
• Works directly with equipment vendors to capture requirements and ensures operational interface between systems and sub-systems is maintained and validated.
• Maintains close coordination with project engineers to comply with schedule and cost requirements of programs.
• Participates in the project bid process to capture engineering and design requirements for bid estimates and firm price quotes to customers.
• Interfaces with customers (internal and external) during entire project to ensure designs meet customer criteria.
• Reviews completed drawing packages from peers and approves them for release.
• Prepares design check lists as needed.
• Maintains regular attendance including being at work, being on time to work and working full shifts.
• Other duties as assigned.

Bachelor's degree (B.S.) in aerospace or electrical engineering desired; minimum of eight years relevant aerospace experience; or equivalent combination of education and experience. Aircraft interior and/or VIP retro-fit experience preferred.

Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.
REQUIRED KNOWLEDGE, SKILLS & ABILITIES
• Must have Visual Engineering (VE) CAD design experience
• Extensive technical knowledge of Boeing aircraft for VIP and/or commercial models.
• Strong working knowledge of My Boeing Fleet for OEM data sets.
• Thorough knowledge of power distribution.
• Thorough understanding of the certification and electrical design process.
• Must be able to provide complex lay-outs and program design studies.
• Ability to work and make decisions independently with limited supervision.
• Ability to successfully interface with customers on projects.
• Competent use of CAD and data management systems.
• Ability to understand and derive multiple customer standard electrical system requirements.
• Ability to work well independently and cross-functionally across multiple organizations.
• Strong communication, time-management, and problem-solving skills.
 
Job Number: 17-745
Job Location: Northwest
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. TCO Design Engineer

Description:
Seeking a Sr. TCO Engineer in Milwaukee, WI.

Job Description:
As a Senior TCO Engineer, reporting to the FLC Engineering Director, you will lead cross-functional project teams in Mortara to complete design engineering and/or supply chain consolidation projects from planning through implementation. You will also perform mechanical engineering activities related to your projects.

Responsibilities:
o Project Scoping & Planning
o General Project Management (forming project teams, budgeting, assigning & tracking
tasks, identify & mitigating project risks, etc.)
o Update mechanical CAD drawings using Pro-E
o Review of Design Inputs and Outputs
o Evaluating and Applying Regulatory Standards
o Lean and Continuous Improvement Initiatives
o Manage one engineer
o Performs other duties as requested
Requirements:
o 5-10 years of applied project management experience
o Experience as a team lead managing multiple projects and coordinating activities (schedules, resource, budgets, etc.) between multiple project managers, preferred.
o The ability to analyze, modify and create mechanical designs is a plus
o Applied experience with Microsoft Project as well as other Office Suite applications
o Prior SAP experience preferred (including DIRs, BOMs, MMDS, and Engineering Changes)
o Demonstrated ability to communicate and negotiate with a diverse group of cross-functional stakeholders in Marketing, R&D, QA, Regulatory, Sourcing, and Operations.
o Well-versed in Medical Device Design Controls.
o Strong communication skills and attention to details
o Ability to lead and coach other team members in the spirit of cross functionality
Education:
o Bachelor's degree in Engineering\
Schedule:
Must be available to work any shift.
 
Job Number: 164867
Job Location: Milwaukee, WI
Rate: $42.65
Duration: 6 Months
Start Date: ASAP
Input Date: 08/31/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Technical Writer

Description:
Sr. Technical Writer should have extensive experience developing new and making revisions to Instructions for Continued Airworthiness (ICA) procedures. Experience should include, but not limited to, on-aircraft field level maintenance and inspection procedures, wire diagram and/or standard wire practice manual content from supplier and engineering data. Experience with ENOVIA SmarTeam or similar Product Lifecycle Management (PLM) database products strong desire. Familiarization with CATIA three-dimensional (3D) modeling and two-dimensional (2D) CAD standards, format, and 3D/2D software products

Bachelor’s degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology. See Other Requirements in Job Description.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/15/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Stress Engineer

Description:
Experience with metallic honeycomb structures highly desirable

Key Responsibilities
  • Research, develop, analyze, design, and test company products or processes using engineering and scientific principles to implement engineering solutions to meet organizational objectives.
  • Analyze and verify product or process design and product performance to customer requirements.
  • Responsible for ensuring product (including parts, assemblies or tools) are consistent with company and customer quality standards. 
  • Research and develop material and processes that support the translation from abstract concepts to functional products.
  • Apply knowledge of engineering and scientific methods and tools to define and characterize behavior of products and processes. 
  • Integrate technical, cost, value and safety considerations into the product definition to comply with customer, regulatory and company requirements.  Document results in drawings, data sets, reports, specifications and supporting data.
  • Interface with other members of project or program team, management and manufacturing staff to facilitate the implementation of manufacturing process improvement initiatives
  • Develop engineering solutions to a wide range of complex technical problems, requiring ingenuity and innovation.  Exercise broad latitude in determining technical solutions. 
  • Review and approve detail design documentation
    • Resolve product design problems in conjunction with technical customer representatives and assist in implementation of resolutions
    • Participate in MRB activities to assure structural  adequacy of non-conformances
    • Supports and directs the preparation of accurate and complete engineering assessments for new platform technologies

  • Establishes and maintains valid structural analysis methodology to substantiate component design
  • Interfaces daily with various departments at various technical and management levels.
    • Prepare, and present technical engineering reviews to both external and internal customers

  • Makes presentations at a senior level internally and externally demonstrating ability to clearly communicate to the audience

 
Qualifications / Experience

  • Requires a 4-year degree in mechanical/aerospace engineering, or equivalent.
  • 8+ years' experience as a Structural Analyst and/or Stress Engineer required
  • Knowledge of classical analysis methods for static and fatigue analysis required
  • Highly experienced in MSC Patran/Nastran preferred
  • Component design and analytical problem solving experience in an engineering environment.
  • US citizenship required due to U.S. Government/military information access requirements. Applicants selected will be subject to a government security investigation and must meet eligibility requirements. Individuals may also be subject to a background investigation to include but not limited to: criminal history, employment and education verification, drug testing, and credit worthiness. This clearance must be maintained during employment.
  • In-Person Interviews only – at candidate’s expense

 
Skills

  • Must be able to demonstrate an ability to independently do work of a creative nature
  • Capable of taking a strategic view
  • Must possess excellent interpersonal, leadership, organizational, negotiation and communication skills
  • Must display a high level of maturity and sound judgment
  • Identifies opportunities to drive business forward
  • Ability to work on multiple tasks, prioritizing as required
  • Capable of interfacing professionally with customers and suppliers at all levels
  • Use of Unigraphics, & Catia V5 for basic design concepts, and review of technical content

 
Desirable

  • Experience in design using advanced materials, and fabrication technologies
  • Knowledge in the use of Mechanical Computer Aided Design (CAD)
  • Previous experience of R&D and Conceptual Design teams
  • Knowledge of General Dimensioning and Tolerancing (GD&T)


 
Job Number: 1710073453
Job Location: Santa Ana, CA
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023GV4AAM&URLSource=cjhunter

Structural Drafter

Description:
Primary Responsibilities:
Has considerable knowledge of the job. Has good understanding of the general and detailed aspects of the job and their practical applications to problems and situations ordinarily encountered. Performs work of more complex scope. Works under limited supervision; work is reviewed for adequacy on completion and interacts with internal and external personnel on matters of moderate importance.
Performs CAD drafting skills using Revit and AutoCAD software to perform tasks. 
Assisting in the coordination of projects from conception (feasibility) through final plan and detailing preparations. 
Providing support to Lead Designer and or leading smaller projects and staff members as needed.
  • Candidate must have a complete understanding of how to read drawings.  Individual will perform tasks using well-defined standards and procedures. 
  • Tasks require moderate to strong understanding of general and detailed job aspects and develop solutions to problems and situations.
  • Primary tasks include CAD drafting using Revit and AutoCAD software. 
  • Work is focused around the design of new structures and retrofit of existing structures for manufacturing facilities.  Proficiency utilizing other standard computer applications a plus.
  • Coordination with other disciplines may also be required which includes gathering information in person or from drawings.  Positive and committed attitude is essential.

Lines of Business

  • Pulp & Paper
  • Power & Utilities
  • Consumer Products
  • Food & Beverage

Core Work – Industrial Buildings & Structures (Framing & Foundation Design)

  • Building Additions & Renovations
  • Paper Machine Rebuilds
  • Platforms & Mezzanines
  • Monorails, Pick points & Crane runways
  • Pipe Racks, Towers & Access Structures

Training and Experience:
  • Candidate must have graduated in an Architectural or Structural Program curriculum with a structural emphasis.
  • Strong working knowledge of Revit and AutoCad is required with Microstation or other CADD a plus. 
  • Strong communication and organizational skills.
  • Ability to effectively interface with all levels of personnel and management.
  • Ability to work and thrive in a team environment.
  • Strong problem solving skills.
  • Ability to self-motivate and work productively without supervision.
  • Working knowledge of MS Office Applications is required.
  • Excellent oral and written communication skills.
  • Industrial projects preferred.
  • 3-7 years of experience

 
Job Number: 1610060696
Job Location: Green Bay, WI
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Sue Van Pay
Address: 110 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 920/499-9943
800 Phone: 800/333-1389
Fax Phone: 920/499-9067
Email: cecjgreenbay@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FxCzAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer I (FL) - CATIA V5

Description:
Uses 3D Computer Aided Design (CAD) and Manufacturing tools, to develop and maintain mechanical/structural engineering products, environments and trade studies. Prepares design layouts and modifies existing designs to satisfy customer requirements. Assists with the use of 3D laser scanning equipment used for creating as-built and reverse engineering of support equipment and, large structures and facilities. Ability to multitask and to work well within a team environment is a must. Works under close supervision.

AS or BS degree in BS Mechanical Engineering or related field. Experience with metrology, coordinate measurement systems or surveying is highly desired.
 
Job Number: TechDesFL
Job Location: Kennedy Space Center, FL
Rate: up to $38/hour
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 09/15/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer III (OK)

Description:
Uses manual or Computer Aided Design (CAD) tools, to develop and maintain mechanical/structural engineering product definition. Prepares design layouts and modifies existing designs to satisfy customer and production requirements. Assists in the development of product definition based on applicable standards, requirements and design parameters. Develops statements of work, including design requirements, cost and schedule estimates. Coordinates and develops work transfer packages. Contributes to the integration of product definition across internal and external business partners to provide a functional end-product. Investigates and resolves moderately-complex manufacturing process or engineering related issues. Verifies accuracy of non-technical data produced by others. Supports development of new processes by providing input on detailed aspects of the process. Mentors less experienced personnel.

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

CATIA V5
 
Job Number: TechDesOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/03/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer III - FL

Description:
Uses Computer Aided Design (CAD) tools (CATIA, DELMIA, Pro/e, KDDMS), to develop and maintain mechanical/structural engineering products. Prepares design layouts and modifies existing designs to satisfy customer and production requirements. Assists in the development of products based on applicable standards, requirements and design parameters. Develops statements of work, including design requirements, cost and schedule estimates. Works with trackers and laser scanners to as-built and verify modifications to existing infrastructure. Contributes to the integration of product definition across internal and external business partners to provide various scanning products, CAD products and trade studies. Investigates and resolves moderately-complex ground processing and engineering related issues. Verifies accuracy of end products produced by others. Supports development of new processes by providing input on detailed aspects of the process. Mentors less experienced personnel. Works under general direction with little supervision.

AA degree in related discipline and typically 5 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: TechDesFL
Job Location: Kennedy Space Center, FL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 5+ Months
Start Date: ASAP
Input Date: 10/13/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Technical Writer III - KY - C

Description:
Chipton-Ross is seeking a Technical Writer III for an opening in Lexington, KY.

RESPONSIBILITIES:
Writes, rewrites and/or edits technical documents such as technical procedure manuals, user manuals, programming manuals, service manuals, operational specifications, and related technical publications to communicate clearly and effectively technical specifications and instructions to a wide range of audiences. Acquires subject knowledge by interviewing product developers, observing performance of production methods, referring to technical specifications, blueprints, engineering illustrations, and trade journals. Oversees preparation of illustrative materials, selecting drawings, sketches, diagrams and charts. Conducts quality review of materials.

REQUIRED EXPERIENCE:
C130J familiarity, Reading Engineering drawings, Familiarity with aviation TCTO's

ADDITIONAL EXPERIENCE:
Corel software experience, CAD software experience (CATIA, Solidworks, autocad)

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
5/40, 1st Shift

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 163693
Job Location: Lexington, KY
Rate: Up to $37.06 DOE
Duration: 12 Months
Input Date: 12/17/2017
Firm Name: CHIPTON ROSS
Attention: LaVada Pulley
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lpulley@chiptonross.com
Website: www.chiptonross.com

Technical Writer III - Interim SECRET

Description:
PDS Tech, Inc. is seeking a Technical Writer - Level 1 for an open position in Lexington, KY.
Job Description: 

  • Writes, rewrites and/or edits technical documents such as technical procedure manuals, user manuals, programming manuals, service manuals, operational specifications, and related technical publications to communicate clearly and effectively technical specifications and instructions to a wide range of audiences.
  • Acquires subject knowledge by interviewing product developers, observing performance of production methods, referring to technical specifications, blueprints, engineering illustrations, and trade journals. Oversees preparation of illustrative materials, selecting drawings, sketches, diagrams and charts.
  • Conducts quality review of materials. 

Mandatory Skills:
  • C130J familiarity, Reading Engineering drawings, Familiarity with aviation TCTO's 
  • Must have an ACTIVE SECRET CLEARANCE

Desired Skills:

  • Corel software experience, CAD software experience (CATIA, Solidworks, autocad)

 
Job Number: 1710068956
Job Location: Lexington, KY
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JtPlAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer Sr

Description:
Technical Writer Sr.

Location: Savannah, GA
Pay Rate: $34/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
1. Candidate should have extensive experience developing new and making revisions to Instructions for Continued Airworthiness (ICA) procedures. Experience should include, but not limited to, on-aircraft field level maintenance and inspection procedures, wire diagram and/or standard wire practice manual content from supplier and engineering data
2. Experience with ENOVIA SmarTeam or similar Product Lifecycle Management (PLM) database products strong desire
3. Familiarization with CATIA three-dimensional (3D) modeling and two-dimensional (2D) CAD standards, format, and 3D/2D software products
4. 'Hands-on' experience or working knowledge of aircraft inspection programs, aviation regulations, aircraft system content organization and OEM technical manuals development preferred, as a minimum candidate should possess knowledge of the MSG-3 Maintenance Program and ISC Sustaining process
5. Experience with aircraft technical manual content organization and authoring using S1000D spec and SNS, or recent experience of the same using iSpec standards required
6. Familiarization with Electrical Wiring Interconnection System (EWIS) best practices, applicable CFRs and development of related maintenance procedures desired
7. Accustom to a fast paced environment able to work overtime as required to meet deadlines
8. Understanding of and practical experience with Simplified Technical English, Spec ASD-STE100 and use of STE validation software desired
9. Mentor Graphics Capital Harness Systems (CHS) knowledge a plus

Education and Experience Requirements:
Bachelors degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology. See Other Requirements in Job Description.

Other Requirements:
1. At least three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software
2. Strong technical writing and communication skills are required.
3. Ability to read and interpret blueprint and Engineering Orders.
4. Must have a thorough knowledge of aircraft tools, test equipment, vendor coding, parts nomenclature, maintenance procedures, and of aircraft equipment and maintenance.

Position Purpose:
-Responsible (either individually or with other team members) for the writing of major portions of technical publications.
-Supports the complete workflow process to ensure successful completion of each revision cycle and distribution of technical publications.
-Complies with established quality processes to ensure accuracy, ease of use and timely delivery of each revision cycle content.

Principal Duties and Responsibilities/Essential Functions:
1. Write technical publications content as directed.
2. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system.
3. Consult with internal, external customers and Engineering to create/revise technical manuals to support the department/corporate operating priorities.
4. Provide input to management on new processes or technology for integration into the technical publications business model.
5. Assist in developing solutions for overcoming the technology/technical issues introduced by outside suppliers for incorporation into existing manuals.
6. Work with management, other departments, and team members in the development of specific project data.
7. Provide liaison with Completion Center, Technical Operations, Production and/or Completion Engineering, Service Center to obtain the necessary approval for technical information prior to its release to customers.
8. Participate with publications team to ensure all internal department workflows and business processes are followed for issues relating to producing and delivering technical publications and associated Computerized Maintenance Program (CMP) data.
9. Work with internal/external customers in the development of specific project requirements of source data to ensure a seamless incorporation of new data in the publications environment.

Additional Functions:
1. Perform additional duties as assigned.
 
Job Number: 7407
Job Location: Savannah, GA
Rate: 34.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/03/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
C/C++ VxWorks Embedded SWE

Description:
Programming Languages: C, C++, and C# CM Tools: Perforce, GIT, Accurev, Source Integrity Compilers: VxWorks, Unix, Lynx.OS, Visual Studio IDEs: Workbench, Eclipse, Visual Studio Technical
Degree - Electrical, Computer Engineer or Computer Science
Preferred: Experience with VME Bus Programming as well as working with VxWorks board support packages
 
Job Number: 7266799
Job Location: multiple
Rate: Market
Per Diem: Split
Duration: 6-12 months
Start Date: ASAP
Input Date: 10/13/2017
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

Back to Advanced Job Search