Job Search Results

875 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2017/12/17 Sunday 07:52AM Pacific Time by ContractJobHunter. )

Listings 1 - 875

Go To My Job Tracker

Expand all descriptions

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2183 - STRESS ENGINEER - resume - cv. word doc only

Description:
Preliminary and detailed sizings.

Stress analyses to ensure requirements (strength, fatigue, damage tolerance, weights, customers) are met.

Validation of engineering drawings and IPDT support.

Preparation of certification reports and support to entry-into-service.

Have a University mechanical or civil or aerospace engineering degree with a minimum of 5 years relevant experience. Your experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Knowledge of CATIA, finite element modeling and analysis is an asset. General computer skills are essential.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Must be able to read and write in English and have good communication skills. Being completely bilingual (French and English) is an asset.

Must have knowledge and experience of structural sizing methodologies.

Must be competent in one of the following and have some knowledge of all other aspects of analysis (Structural stress analysis, FEM, fatigue/DTA and loads).

Must have experience in at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Must have Excellent knowledge of aircraft structure and system installation technical requirements ( TCCA, FAA & EASA).

Must have Experience of working with new design and must be able to demonstrate understanding of aircraft component load path and functions.

Must have experience using Patran and Nastran.

Must have working knowledge of Catia V5, finite element modeling and analysis is an asset.

Must be computer literate and familiar with commonly used software ( MS Office )
 
Job Number: 2183
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2196 - RM&S ENGINEER - resume word doc only please.

Description:
Be part of the Client R,M&S team, for the Client aircraft, and the primary tasks are to conduct aircraft safety and/or system safety activities, and to support all design activities.

Be responsible for RM&S deliverables specific to the assigned systems.

Participate in the, system functional hazard analysis, aircraft and system fault tree analysis, system safety assessment, failure mode and effect analysis and the final R,M&S certification report.

The duties will also require certification activities. This will involve co-ordination of technical issues and resolutions across all Client, Partner/Supplier, Regulatory and Customer parties.

University graduate in electrical/mechanical engineering with at least 15 years R,M&S experience.

Have a strong electro-mechanical background and has an excellent understanding of aircraft performance characteristics, aircraft systems definition, integration, interfaces, component qualification, reliability and safety requirements and certification process of flight controls systems.

Preferably have been directly involved in the aircraft definition and certification.

Must be very cognizant of the relevant Airworthiness Regulations and certification process.

Have the ability to communicate sound technical proposals and work status to senior management, be a team player, a self-motivated person and be able to work under pressure.

Possess a strong sense of responsibility and integrity.

Have good oral and technical writing skills in English are required (French is an asset).

Possess basic knowledge of MS Office.

Knowledge of creating Failure Mode Effect Analysis (FMEA), Fault Tree Analysis (FTA) and Safety Analysis is required.

Aircraft Level System Safety, preferably in Hydro-Mechanical but could also be Electrical Avionics.

Must have Aircraft Level Knowledge of the following:
In-depth aircraft level understanding FMEA - Failure mode and effects analysis
FTA - Fault Tree Analysis, CMA - Common Mode Assessment
CCMR Process - Candidate Certification Maintenance requirement
25.1309 Regulation
ARP4761 Safety process

Software Skills:
CAFTA required
Must be proficient with Excel
MS Access database development would be asset
Microsoft Office Suite
CATIA would be an asset
 
Job Number: 2196
Job Location: Montreal, Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2205 - STRUCTURAL GROUND. TEST INTEG. - resume word doc only

Description:
Lead multi-functional ground test review meetings.

Coordinate EXP internal activities to meet schedule and budget.

Work in close relationship with EXP Management and Program team.

Provide detail schedule and Status Report.

Execute EXP Test Portfolio following established priorities.

Interact technically with Client Suppliers to achieve Montreal site mandate.

Work in close interaction with Shop and QC (union staff).

Manage budget/operating plan definition and periodic tracking.

Prepare presentations and information for upper management.


Have a Degree in Mechanical engineering or equivalent experience.

Have a minimum of five 5 year experience in the aerospace industry, with close interaction with engineering and production teams.

Have strong communication skills both in English (written, spoken) and French (spoken).

Have good knowledge of MS Project (intermediate or advanced user).

Are a strong team player and can demonstrate superior organizational and leadership skills.

Are driven by results and autonomous.

Previous experience in Project Management is required.

A positive attitude and able to work in a fast-paced, high-pressure environment.

Must have strong communication and negotiation skills.

Must have excellent troubleshooting skills.

Must have Excellent Presentation Skills.
 
Job Number: 2205
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2217 - AIRCRAFT PERFORMANCE ENGINEER - cv word doc only

Description:
Attend flight test brief/debrief for performance flight test points

Provide fast turnaround evaluation of test points (pass/fail) prior to next flight.

Data reduction of test points and creation/substantiation of aircraft performance models

Writing reports that will be used for demonstrating compliance with Airworthiness regulations

Creation of data for use in Aircraft Flight Manual Performance section (takeoff and landing data).

Creation of data for use in the Flight Planning manual (climb, cruise and descent data)

Creation of data for use in the Quick Reference Handbook.

Provide support to the Flight Management System database generation and testing (both certified and non-certified data).

Provide support to various performance studies and analysis as required by the client.


Bachelor's degree in Aeronautical (or Mechanical) engineering as well as a minimum of 5 years of experience in the domain of aircraft performance during the development, certification and/or in-service support of aircraft;

Possess good interpersonal skills in order to work in team and interface with other groups, suppliers and management as well as good written and oral communication skills in English.
Good programming skills (FORTRAN, Visual Basic) and a working knowledge of a UNIX operating system environment;

Work independently and demonstrate initiative to achieve the goals established for you and work well in small, dynamic environment.

English - French working knowledge an asset.

Prior Testing Experience (Flight or Ground) is an asset.

Must be customer-oriented with innovative problem solving skills.

Must have excellent troubleshooting skills.

Must be detail oriented.

Knowledge of certification requirements is an asset.

Must have a positive attitude and able to work in a fast-paced, high-pressure environment.

Must be familiar with Aircraft Flight Manual Data.

Knowledge of French would be an asset;
 
Job Number: 2217
Job Location: Toronto, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2219 - FLIGHT SIMULATION SPECIALIST - resume word doc only

Description:
Develop aircraft simulation models. These models are used in the design and validation process of a new aircraft, in support of in-service aircraft and for incident investigation. The models are also deployed in training simulators used to instruct flight crews throughout the world. Flight simulation engineers support the qualification of these flight crew training simulators with regulatory authorities.

Use data from computational fluid dynamics, empirical aerodynamic estimation methods, wind tunnel tests and derive aerodynamic derivatives from flight test data to conceive and update the simulation models.

Develop and maintain bombardier's pilot-in-the-loop engineering flight simulators and participate in planning and testing of new and existing designs, in collaboration with flight test crews.

Interact closely with the stability and Control, System Simulation, Fly-by-Wire, Loads, Systems Engineering and aircraft/engine performance groups, and flight simulator manufacturers.

Use state of the art software, such as Matlab/Simulink, MAtrixX/SystemBuild, to develop the simulation models. In addition, customization and automation of these tools is achieved through programming in C/C++ and other software packages.


Have a Bachelor's or master's degree in Aeronautical (or Mechanical) engineering as well as a minimum of eight (8) years of relevant experience in the Aerospace industry.

Have good knowledge and experience in simulation model development, real-time simulation, flight dynamics, flight testing, test data analysis and application of North American and European simulator qualification requirements.

Have good programming skills. Knowledge of Windows and UNIX operating system environments, Matrixx/SystemBuild, Matlab/Simulink, MS Word, MS Excel, MS Powerpoint are essential.

Have good written and oral communication skills.

It would be an asset to have good knowledge and some experience in wind tunnel testing, flight testing, test data analysis and the application of the FAA/EASA Part 25 certification requirements, along with PV-WAVE, Frame Maker.

Have a thorough understanding of flight simulation model generation for design, rig and pilot training purposes.
 
Job Number: 2219
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2222 - PROPULSION SYSTEM INTEGRATOR - CV - word doc only

Description:
Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Duties include:

Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports;
Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.


Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Have a background in design, integration, development and certification of Propulsion Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English and French (required).

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).
 
Job Number: 2222
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 10/06/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2226 - CABINET INTEGRATOR - resume - word doc only

Description:
Act as a specialist in aircraft interior cabinets.

Search for information related to project assignment to the interior and exterior of the aircraft.

Manage customer requests related to customizations of interior options.

Establish technical requirements, mechanical and electrical interfaces and design, integrate, certify, test and troubleshoot the systems described above.

Assume responsibility for Definition engineering deliverables and milestones that the department must meet.

Must be challenge-driven, results-oriented and problem-solving oriented.

Excellent knowledge in design and development of concepts using graphic design software.


Bachelor's Degree in Mechanical or Equivalent Engineering or college with a minimum 5 years of relevant experience.

Familiar with the CATIA V5 3D design tool.

Must have experience in the design or installation of cabinets to be assembled.

You are well organized and focused on projects.

Must have good oral and written communication skills in English and French.

Able to work in a multidisciplinary teams, you adapt easily to changes, and customer satisfaction is your number one priority.

Customer focused, problem-solving and innovative focus as well.

Autonomous, flexible and results-oriented through project management skills.
 
Job Number: 2226
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 10/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2236 - INTERIORS INTEGRATOR - cv - word doc only

Description:
Perform engineering integration of cabin systems.

Create engineering requirements to integrate as part of the Functional Tests Engineering Requirements (FTER) and certification documentation related to cabin systems.

Review and approve new cabin systems concepts and prepare related Aircraft integration documentation.

Create required documentation such as technical white papers, functional diagrams, Technical requirement Documents (TRD) and statement of Work (SOW).

Supplier coordination and follow-up.

Provide production support and answer promptly to raised issues according to their assigned priority level.

Perform troubleshooting when required, to minimize issues
impact on customer and/or in production.

Bachelor in Electrical Engineering or equivalent and accumulated at least five (5) years of experience with aircraft mechanical systems.

Experienced with project and Supplier management.

Bilingual (French - English) written and spoken.

Ability to work with minimum supervision, within a multi-disciplinary team.

Proven record of leadership and technical problem solver.

Must be proficient in 3D design with CATIA V5.

Must be customer-oriented with innovative problem solving skills.

Relevant technical experience in interior completion is required.

Knowledge of certification requirements is an asset.

Understanding of interiors products integration in Business (preferred).

Must have design experience in cabinet assembly design and/or cabinet installation.

Experience in interiors completion Design is an asset.

Must be capable of obtaining Design Authority status.
 
Job Number: 2236
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2239 - CABINET DESIGNER - cv. word doc only

Description:
Act as a specialist in a specific system/monument.

Define technical specifications, mechanical/electrical interfaces, design, integrate, certify, test and troubleshoot the above described systems.

Organize and attend design reviews taking into consideration industry regulations, Client Design Practices and requirements.

Be in direct contact with suppliers and responsible for the delivery of quality engineering documentation that meets Client Standards.

Research, design and evaluate new technical concepts or emerging technologies. (Trade Shows, Air Shows, technical exhibitions, etc).

Procure parts and supply instructions drawings to employees to build mock-ups/prototype.

Provide definition engineering in relation with new designs.

Support the creation of Interface Control Drawings (ICD).

Report status, identify and mitigate roadblocks.

Point of contact on a technical level for designers.

Accountable for engineering deliverables and milestones for a group of monuments.

Bachelor's degree in Mechanical Engineering with 5 to 8 year experience.

Knowledgeable in 3D design with CATIA V5.

Organized and project oriented.

Must be bilingual and have good communication skills including good English and French writing and verbal skills.

Are a team player, working in a multidisciplinary team.

Customer-oriented with innovative problem solving skills and you are organized.

Autonomous, flexible and oriented toward result via your project management skill.

Experience and have lead a small group of designers or equivalent.

Have design experience in cabinet assembly design and/or cabinet installation.
 
Job Number: 2239
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 10/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2243 - PNEUMATICS SPECIALIST - cv. word doc only

Description:
Influence the definition of New Aircraft Development Projects within Product Development Engineering as well as supporting Sustaining Programs.

Provide Technical expertise to the Engineering teams, including Strategic Technology and Advanced Design.

Provide direction about Industry trends and identify company needs within the discipline.

Lead or support the Pneumatics Knowledge domain roll-out and knowledge capture & sharing.

Identify, develop and execute development opportunities for discipline members .

Lead or support Systems integration aspects in product development.

Have a Bachelor degree in Mechanical/Aerospace engineering.

Have more than 15 years of engineering experience in the field of Aerospace Pneumatic Systems.

Demonstrate good working knowledge of FAA, EASA, TCCA certification requirements (regulatory Authority delegation is an asset).

Are recognized within the industry for your expertise in Pneumatics.

Have proven leadership skills, work collaboratively in a team environment and possess excellent interpersonal and problem solving skills.

Possess good written and oral communication skills in English. (Knowledge of French is an asset).

Are available to travel on short term assignments as required.

Are proficient with most-used office programs, e.g. MS Word, Excel and Powerpoint.
 
Job Number: 2243
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2244 - FLIGHT DYNAMICS ENGINEER - cv. word doc only

Description:
Conduct aircraft Stability & Control analyses using in-house software.

Support the development and modifications to dynamic flight simulation models.

Perform analyses and write reports that demonstrate aircraft compliance to airworthiness regulations.

Keep abreast of advances in the state of the art and in Regulatory Requirements.

Interface with other internal disciplines and external partners/suppliers to ensure efficient data-flow and decision-making.

Prepare Technical Reports, Test Plans, Requirements Documents, Work Statements and Cost Estimates.

Involve data- and information-exchange with in-house disciplines such as Weights, Flight Controls, Customer Engineering, Airworthiness, Systems, Testing, Production and In-Service Support.

Participate in the planning and execution of flight tests.

Participate in the planning and execution of wind tunnel tests.

Develop, use and maintain in-house software and methods.

Provide support to production and production flight-test for aerodynamic and aircraft handling related issues and non-conformances.

Have a Bachelor%u2019s or Master%u2019s degree in Aerospace or Mechanical Engineering from an accredited university.

Have at least two to five (2-5) years of specialization in aircraft flight dynamics, aerodynamics, stability and control, aircraft handling, and flight simulation.

Have experience with dynamic flight simulations using commercial codes such as MATLAB/Simulink or MatrixX.

Have previous experience with FORTRAN and/or C and/or C++ programming, and the UNIX operating system is an asset.

Have a basic understanding of aerodynamics, aeroelasticity, and aircraft design.

Have a basic understanding of aircraft structures/systems and familiarity with airworthiness regulations.

Proficiency in preparing technical reports and presentations via office-software is a pre-requisite.

This position is a intermediate level in Flight Characteristics.
 
Job Number: 2244
Job Location: Toronto, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2254- RM & SAFETY ENGINEER - cv. word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Client aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers.

Responsible for reviewing Partner's/Supplier's reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Will be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare & present risk assessments for continued airworthiness queries.

Bachelor's degree in engineering, with at least fifteen (15) years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.)
 
Job Number: 2254
Job Location: Toronto, Canada
Rate: 63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/22/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2256 - STRESS ENGINEER - COMPLETION - cv in word doc please

Description:
First point of contact for Client and Supplier Integration team

Prepares Kickoff package needed for Outsource supplier to be able to start design work.

Assists Supplier in technical solutions.

Has an Overview and general understanding of the monument including sub systems.

Coaches and Assist Supplier in understanding and following Client processes and best practices.

Highlights opportunities to improve the product/process (ex: weight reduction, DDP strategy, etc)

Reviews engineering packages to ensure that nothing is missed.

Participates in scheduling of deliverables and works with Project team to ensure that deliverable dates are meet.

Communicates Milestone readiness (3DDR model freeze, CDR exits etc).

Support Weekly Quality Meetings presenting Quality KPI to calibrate Quality

Attends IPDT weekly Meetings.

Participates and supports in Design RFCs raised by HCL and Production RFCs raised by Liaison

Must have a bachelor's degree in Mechanical Engineering or a DEC in Aeronautics or Mechanical Engineering with at least fifteen (15) years of relevant Stress experience.

Knowledge of Catia V5 is required with a minimum of five (5) to seven (7) years of Catia design experience.

Must have a minimum of 5 years MRB experience.

Relevant technical experience in interior completion is required.

Have relevant technical experience in interior completion on Client Platform and knowledge of certification requirements, Aircraft systems and interiors.

Must have experience in stress analysis and FEM and experience in at least one of the following skills in the structural integrity qualification (loads, fatigue and damage tolerance) of airplane primary structural components.

Must have a good command of various softwares (MS Suite, Outlook, Acrobat, etc.).

Must have practical knowledge and experience of Nastran/Patran.

Must have excellent knowledge of aircraft structure and system installation technical requirements.

Must have practical knowledge and experience of CATIA/Enovia V5.

Have good communication skills including good English writing skills, and good English verbal skills. Knowledge of French is an asset.

Are a team player, you have the ability to work with minimal supervision, and are able to make decisions.

Are customer-oriented and innovative in problem solving.
 
Job Number: 2256
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 10/25/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2263 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv - word doc only

Description:
Support the Client Final Line Assembly by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Hydro-Mechanical related issues (FBW & Control Surfaces, Wing High Lift, Hydraulics, Landing Gear, Brakes), analyze and develop solutions/recommendations and reports. Disposition RFCs and RNCs as required.

Work with the product development team to assists with technical proposal activities, including preparation of written material and presentations. Recommend and approve design changes.

Support flight test activities including the development and approval of Test Definition Sheets, trouble-shooting FTV issues, Problem Report Resolution, Test Witnessing, Test reports review and approval.

Support all development, Safety of Flight and Certification Testing on suppliers test rigs, systems and structures test rigs

Interface with the Design Approval Delegate (DADs and CDADs) to ensure all design activities and decisions meet regulatory requirement to achieve flawless certification.

Develop good working relationships with various departments within Company and with all suppliers.


Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset.

Experience in providing engineering support to the Final Line/ Production.

5-10 years'experience in aircraft Hydro-Mechanical systems (FBW, Flt Ctrl, Hydraulic, Landing Gear).

Conversant with design, qualification and certification test requirements of Aircraft Electrical systems.

Knowledge of control systems including system controllers%u2019 integration and design and Software/Hardware certification (DO-160, DO-178, etc).

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Familiar with Microsoft Office software tools.

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Must have previous experience with fly by wire, wing high-lift or hydraulic systems on Commercial or Business Aircraft.

Must have experience in the definition and certification of at least one complex aircraft control system. Flight Controls/FBW experience would be an asset.

Must have a good understanding of all facets of system definition, integration, and certification and have a good knowledge of aircraft systems and interfaces (e.g., electrical, Hydraulic , Avionics, Auto-Flight, Flight Controls) integration, testing and installation.

Have a good knowledge of data buses, input signal management including monitoring, redundancy management and mode logic, and failure modes and effects.
 
Job Number: 2263
Job Location: Toronto, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/22/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2nd Shift Maintenance Technician

Description:
Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

For consideration to this position, please contact Eric Khassanov at ekhassanov@pdstech.com or 843-277-6611.
 
 


 
Job Number: 1610057656
Job Location: KS City, MO
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FgpWAAS&URLSource=cjhunter

A&P Mechanic

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a mid-size but rapidly growing company in Seattle, WA that was founded in 2001. They have a new flight test facility in Moses Lake WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Primary Role: Performing routine and periodic maintenance throughout all phases of flight testing; maintaining quality and safety standards; keeping records; maintaining equipment and supplies.

Secondary Role: Support flight test engineers and ground operations personnel as necessary by helping to install test instrumentation, wiring, and custom manufactured hardware.


Job Duties and Responsibilities:
Perform daily pre and post flight inspections.
Perform routine servicing of aircraft systems.
Perform aircraft systems checks and calibration as required.
Trouble shoot and repair pre and post flight squawks in a timely manner.
Assist in the installation and removal of essential flight test instrumentation hardware and wiring.
Routine removal of panels to route and access flight test instrumentation wires and hardware.
Maintain safe operations and workspace.
Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.
Knowledge/Skills/Abilities:

Experience in maintenance support related to flight test is desired but not required.
Experience with or willing to learn working in a flight test environment.
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong organizational, time management and prioritization skills:

Education
High School Diploma
Formal training in Aviation Maintenance Technologies or other related field
A & P Certificate or equivalent Certificate
1-5 years minimum experience maintaining commercial and/or regional aircraft
 
Job Location: Moses Lake, WA
Rate: open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: Now
Input Date: 12/07/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: smcglinsey@velocity-cs.com
Website: www.velocity-cs.com

A&P Mechanic - Licensed

Description:
Our client in Greensboro is looking for 5 licensed A&P mechanics for both day and night shift positions.

FAA Part 145 Repair Station.  Work on private/corporate aircraft.  Ideal candidates have experience with heavy/light checks, remove and replace, certs, troubleshooting and typical inspection experience.
Exp and requirements:
•    A&P Lic is required
•    FAR 145 experience/Maintenance Repair & Overhaul MRO
•    3-5 years of Corporate/General aviation experience.
 
TOOLS:
•    Must have own full set of tools
•    Must be etched and shadowed



PDS Tech, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status
 
 
Job Number: 1710071683
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Richard Escobar
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000238gjAAA&URLSource=cjhunter

A&P Mechanic- 2nd shift

Description:





PDS TECH is currently looking for many A&P Mechanics for our client in Long Beach, CA



Education and Experience Requirements:


High school diploma/GED. Valid Drivers License required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience, or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large-size aircraft required.

Position Purpose:



Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures. 

Principal Duties and Responsibilities:

Essential Functions:
1. Communicate as required to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision.
2. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers.
3. Ensure that all work accomplished meets quality standards and specifications.
4. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
5. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.)
6. Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas.
7. Provide training to less experienced technicians.
8. Protect customer property (PTP). 

Additional Functions:
1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. 2. Implement and apply Lean/continuous improvement processes to all areas of responsibility.
3. Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use.
4. Comply with safety rules and procedures. Use protective equipment as required and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk.
5. Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders.
6. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
7. Perform other duties as assigned. 

Other Requirements:
1. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.




 



 






 





 
Job Number: 1710072948
Job Location: Long Beach, CA
Per Diem: No
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023EbiAAE&URLSource=cjhunter

A&P Mechanic-Intermediate

Description:
PDS Tech is seeking a Senior A&P Mechanic for an open position in Indianapolis, IN.
In your role, you will:

  • Repair and maintain components used for aircraft airframe and power plant.
  • Inspect aircraft engines, landing gear, instruments, pressurized sections, accessories – brakes, valves, pumps, and air-conditioning systems.
  • Maintain records related to the maintenance performed on the aircraft.
  • Conduct inspections following a schedule based on the number of hours the aircraft has flown, calendar days since the last inspection, cycles of operation, or a combination of these factors.
  • Repair or replace worn or defective parts.
  • May also repair sheet metal or composite surfaces. Mechanics rely on the pilot’s description of a problem to find and fix faulty equipment. Some mechanics work on one or many different types of aircraft, such as jets, propeller-driven airplanes.
  • Perform routine inspections and troubleshooting, including airframe structures, engines, and aircraft system.
  • Perform all airframe, power plant and propeller repairs and modifications required to meet company and FAA requirements.
  • Removal and disassembly of defective parts; assembly and installation of replacement parts; and testing aircraft system.
  • Operate all power tools and equipment necessary to accomplish job assignment.
  • Complete all required maintenance records.
  • Accurately record time worked on a work order.
  • Present a clean and neat work area to our customers.
  • Interpret technical manuals, drawings and blueprints.
  • Tow and park aircraft.
  • Perform other aircraft maintenance work as may be required.
  • Perform varied additional duties as assigned.


For Additional Information on this Opening Please Contact
Kellye Roberts: 
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com



PDS Tech, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status


 

o High school education or equivalent
o A&P license
o Use of arithmetic, blueprints, and specifications plus knowledge of jet an piston airframe and engine principles
o Minimum of 2 years experience as a licensed A&P Mechanic. One year required on Cessna, Hawker, or Beechcraft aircraft performing inspections and repair of aircraft.
 
For Additional Information on this Opening Please Contact
Kellye Roberts: 
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com



PDS Tech, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status

 
Job Number: 1710065657
Job Location: INpolis, IN
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Kellye Roberts
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021YtmAAE&URLSource=cjhunter

Acceptance Technician - Secret Clearance

Description:
PDS Tech, Inc is seeking a candidate for the Acceptance Technician Secret Clearance position located in Dallas, TX.  
Performs a wide variety of technical tasks in support of processes, engineering, quality control, calibration, laboratories, production/test environment, line maintenance and/or chemical handling.
Tests, troubleshoots, repairs, maintains and installs a variety of electronic, electromechanical, and mechanical, computer, laboratory and scientific systems and/or equipment.
May assist in the development of procedures. Selects, sets up and operates engineering and scientific equipment.
Observes, analyzes and reports test data; and when appropriate makes necessary repairs to equipment.
Utilizes various engineering and scientific drawings, manuals and other related documentation in the performance of their tasks.
May include configuration/data management.
Checks for work correctness.
May assist in directing work, assigning and outlining tasks.
Candidate will also be responsible for training/mentoring junior test technicians. 
 
Required Skills:
• Candidate must have 4 years experience in electronics industry or equivalent military electronics experience
• Ability to work directly from approved procedures, schematics, and verbal instructions
• Ability to troubleshoot electronic circuits to component level and effectively identify failure trends
• Ability to isolate problems between the test environment (test station, interface adapter, test cables, etc.) and the units under test and resolve as necessary
• Select appropriate test equipment and configure it based on test specification
• Able to communicate technical issues by generating comprehensive failure entries which correlate failure modes back to the associated test specification(s)
• Ability to interpret test data (plots, graphs, tabulated parameters, etc.) to determine pass/fail condition and determine when further analysis is needed
• Must work well in a team environment
• Candidate must be experienced in the use of computers and software applications (both desktop and technical).
Must be well versed in computer architectures and data protocols in order to facilitate networking/interfacing with other test equipment
• Lifting up to 25lbs, walking, and could involve stair/ladder climbing at the test range(s)
• Candidate must be willing to work second or third shift
• Candidate must have an active Secret Clearance

Desired Skills:
• Radar or Electronic Warfare (EW) systems knowledge
• Direct experience with Radar System and subsystem (Transmitter, Receiver, Antenna, Signal/Data Processor, Power Supply, etc.) evaluation
• Ability to work in a fast-paced manufacturing/production test environment.

Required Education:
Associates Degree in Electronics Science, Military Electronics training or direct experience in testing and troubleshooting of Radar systems
 
Job Number: 1710072910
Job Location: Dallas, TX
Duration: 18 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Jason Andrzejewski
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023EXqAAM&URLSource=cjhunter

Aero Thermal Fluids Analyst

Description:
Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
Duration: 1 year contract
Shift: 1st Shift

**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.

Skills:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
- B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: 7854
Job Location: Savannah, GA
Rate: $60.00 - $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 12/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Aero Thermal Fluids Analyst (3) - FL - C

Description:
Chipton-Ross is seeking an Aero Thermal Fluids Analyst (3) for an opening in Jupiter, FL.

RESPONSIBILITIES:
-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.

REQUIRED EXPERIENCE:
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.
-English: Read, Write, and Speak

EDUCATION:
B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering Skills and Experience

WORK HOURS:
5/40, Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 165071
Job Location: Jupiter, FL
Rate: $DOE
Duration: 12 Months
Input Date: 12/11/2017
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Aero Thermal Fluids Analyst with active secret / ANSYS heat transfer CFD aerothermodynamics liquid rocket engine systems turbomachinery combustion devices URGENT FL

Description:
160246/7337135

Job Title: Aero Thermal Fluids Analyst
62.86/hr


Number of Positions: 3
Remaining Positions: 3
Duties: ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage or Sterling / Talentwise. See attachment for specific background check onboarding requirements **


-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.
Skills: -Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education: B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering


Skills: Required
• ANSYS
• ACTIVE SECRET CLEARANCE

State/Province: Florida
City/Town: Jupiter
Address: 17900 Beeline Hwy


Start Date: 09/18/2017 Hours Per Week: 40.00
Est. End Date: 09/18/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7337135
Job Location: Jupiter, FL
Rate: 62.86/hr max
Duration: 12 month contract
Input Date: 12/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Design Engineers - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring Aerospace Design Engineers for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• To design tooling, fixtures or equipment per customer specifications to meet the intended need
• Develop advanced planning on tooling concepts
• Support manufacturing during build phases and resolve any non-conformances in a timely manner
• Utilize CAD software to perform FEA analysis on designs, write FEA reports and provide design feedback to design engineers
• To support and provide feedback on customer RFQ’s
• Assume other accountabilities and duties as assigned by the Leadership

Qualifications:

• Strong CAD (Catia, NX, etc.) design abilities including 3D modeling and complex assemblies
• Experience with and/or knowledge of Tooling Design and Manufacturing, Controls knowledge a plus
• Experience with and/or knowledge of Automated Production Systems a plus
• Ability to effectively prioritize and execute tasks in a high-pressure environment including following on tools during the fabrication, build installation and commissioning phases of the project
• Ability and willingness to travel to any of the customer and Company’s work locations in North America, Europe and Asia, as required by Management
• Must be willing to work extended hours, when necessary, including overtime, weekends and holidays and on night shift, as project and customer demands dictate
• Excellent interpersonal, written and verbal communication skills
• Ability to work with others, including peers and personnel in other departments
• Eligibility for clearance under the Canadian Controlled Goods and the American ITAR requirements
• At minimum a Bachelor of Science in Mechanical or Aerospace Engineering, Masters of Science in an engineering discipline preferred
• PE license preferred, must show ability to attain license
• Minimum 5 years’ experience performing stress analysis utilizing FEA software (Abaqus, Algor, NASTRAN/PASTRAN, etc.) and performing hand calculations

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39985
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Instrumentation Technician

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.The strategic purpose of the Test and Evaluation Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

Responsibilities:

Reading and creating wire diagrams.
Selecting or auditing appropriate sensors given engineering requirements.
Working with customers and engineers to define appropriate instrumentation requirements.
Designing instrument installations and creating installation instructions.
Instrumentation installation.
Evaluating instrumentation installations for function and safety.
Troubleshooting instrumentation problems.
Data acquisition system operation.
Documenting data system practices and procedures.
Generating instructions and operation manuals.
Developing sensor calibration and functional test procedures.
Maintaining calibration records.
Domestic and international travel may be required.
Desired Qualifications:

3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to work interdependently, and lead small groups.
CATIA V experience beneficial.
Experience with data processing and analysis beneficial.
Computer programming experience beneficial.
Proficient in working with Microsoft Office applications including Word and Excel.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Instrumentation Technicians-Flight Test

Description:
Interested in candidates with aerospace or automotive backgrounds.

Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

Responsibilities:
� Reading and creating wire diagrams.
� Selecting or auditing appropriate sensors given engineering requirements.
� Working with customers and engineers to define appropriate instrumentation requirements.
� Designing instrument installations and creating installation instructions.
� Instrumentation installation.
� Evaluating instrumentation installations for function and safety.
� Troubleshooting instrumentation problems.
� Data acquisition system operation.
� Documenting data system practices and procedures.
� Generating instructions and operation manuals.
� Developing sensor calibration and functional test procedures.
� Maintaining calibration records.
� Domestic and international travel may be required.

Desired Qualifications:

� 3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to work interdependently, and lead small groups.
� CATIA V experience beneficial.
� Experience with data processing and analysis beneficial.
� Computer programming experience beneficial.
� Proficient in working with Microsoft Office applications including Word and Excel.
 
Job Location: Moses Lake, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 2-3 year contract or Direct
Start Date: Now
Input Date: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Air Systems Engineer-Lead

Description:
Primary Responsibilities:
Candidate will be responsible for leading projects, defining scope and responsibilities, leading a team of engineers/designers.
Will be required to thoroughly check drawings for design intent and check Bill of Materials.
Must ensure drawings and deliverables meet the scope and client expectations.
Support procurement activities, including coordination with vendors and vendor drawings review.
Support contractor reviews, and installation planning activities.
Individual will travel globally for machine installation, check out and start up
Candidate will plan the work, and track and report work in progress.
Will lead a design team for projects, and work with other disciplines to assure the project design is complete and accurate.
 
BS or MS in Mechanical or Chemical Engineering required.
10 to 12 years’ of related experience in the consumer products industry or any related industry is required. Experience with an engineering consulting firm is a plus.
Candidate should possess good experience on air systems, which include high vacuum systems, low vacuum systems, forced air systems, dust collection equipment like bag filters, RACF (reverse air flow cleaning filters), cartridge filters, trim collectors etc., vacuum material handling and vacuum conveying system concepts.
Knowledge of spark suppression and explosion suppression systems is preferred.
Experience on installation and duct traverse flow data collection would be added advantage.
Candidate must be able to calculate air balance, mass balance, line sizing, duct sizing, process vacuum requirements based on functions, and system pressure drop calculations.
Knowledge of international standards such as AMCA, ASHRAE , SMANCA ACGIL are required.
Should be able to select and size the fans, duct, and other air system elements like cyclones, filters etc.
Candidate must possess good communication skills and be able to successfully interact with clients on global projects.
Microsoft Office experience is required.
AutoCAD and SolidWorks experience is preferred.
Domestic and international travel will be required.
 
 
Job Number: 1610057845
Job Location: Green Bay, WI
Duration: 4 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Sue Van Pay
Address: 110 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 920/499-9943
800 Phone: 800/333-1389
Fax Phone: 920/499-9067
Email: cecjgreenbay@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FhdvAAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interior Design Engineer

Description:
Interior Design Engineer:
Location: Southeast USA
Duration: long term contract

The Interior Design Engineer will perform design engineering for cabin & cockpit structures, components, and trim for aircraft. The individual will also support tasks associated with interior Installations.

Duties and Responsibilities:
1. Creates conceptual designs for interiors of the aircraft through 3D modeling software, drawings, and/or drafting application.
2. Develops designs for form/fit/function to meet customer and design criteria.
3. Provides designs for the fabrication process including sheet metal, extrusions and inject molding
4. Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
5. Makes recommendations to engineering lead/management.
6. Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.
7. Ensures adherence to program schedule.
8. Performs other duties as assigned.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors’ degree in Mechanical, Aerospace or Civil Engineering from a four year college or university is required. (In lieu of degree, management may elect to consider individuals with a equivalent years of combined experience and training.)
2. Masters’ degree in Engineering preferred.
3. 8+ years of engineering experience with at least three years of design engineering experience directly related to mechanical/interior design for commercial aircraft.

Knowledge, Skills and Abilities:
1. Working knowledge of conceptual design development of aircraft interiors.
2. Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
3. In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
4. Familiarity with 14CFR Part 23/25.
5. Proficiency in CATIA V5 workbenches or equivalent 3D modeling tools (i.e. - Solidworks, Unigraphics, etc).
6. Proficiency in Teamcenter (or equivalent PLM tool).
7. Ability to work independently or within a team environment.
8. Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
9. Ability to work cross functionally with Quality and Production to resolve issues on the production line.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Southeast US
Rate: DOE
Per Diem: Yes
Overtime: Possible
Duration: 9+ months
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft System Integration Engineer TSI

Description:
UNIQUE SKILLS
1. CATIA Knowledgeware and SmarTeam experience desirable.
2. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
3. Experienced in engineering review of 3D models and PLM data for integration criteria including, but not limited to, system separation, clash analysis, kinematics and standard part usage is desirable.
4. Experience with mechanical assemblies and manufacturing technique design.
5. Excellent communication skills, written and verbal. Ability to lead daily sign off meetings.
6. Use and understanding of Dimensioning and Tolerancing including familiarity with ASME Y14.5 a must.
7. Use of Microsoft Word, Excel and Power Point for creation of reports.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-751-98281
Job Location: Southeast
Rate: $50.00 to $55.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Airworthiness Inspector Sr

Description:
PDS is seeking a  Airworthiness Inspector Sr  for an open position in Savannah, GA.

The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. 

Essential Functions:
  1. 1. Responsible for all quality control inspections on aircraft/components in the Repair Station.
  2. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
  3. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting.
  4. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components.
  5. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
  6. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
  7. 7. Ensures aircraft/components are airworthy prior to any flight activities.
  8. 8. Mentors technicians on effective documentation. 


Additional Functions:

  • Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, airworthiness Directive status, and Service Bulletin status.
  • Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
  • Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example.
  • Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures.
  • Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft.
  • May perform ODA functions as assigned.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
  • Performs other duties as assigned. 


For Additional Information on this Opening Please Contact
Kellye Roberts
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com

Education and Experience Requirements:



  • High School graduate/GED. Airframe and Powerplant License required.
  • Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.

Other Requirements:

  • Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
  • Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required.
  • Familiar with FAA certification approval processes.
  • Strong written and verbal communication skills. Must be able to effectively prioritize tasks.
  • Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.


Unique Skills:



  • Must be able to support AAP on extended or alternate shifts and weekends.


For Additional Information on this Opening Please Contact
Kellye Roberts
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com

 
Job Number: 1710067773
Job Location: Savannah, GA
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Kellye Roberts
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000012Yk7AAE&URLSource=cjhunter

Apprentice Avionics Harness Technician - (6) - CA

Description:
Chipton-Ross is seeking a Apprentice Avionics Harness Technician for an opening in Hawthorne, CA.

RESPONSIBILITIES:
As an Avionics Harness Technician you will be responsible for fabricating and assembling high quality/high reliability wire harnesses and electro-mechanical assemblies under the instruction of a seasoned Technician. This is a great opportunity to learn more about Avionics for individuals with a strong mechanical aptitude and a passion for working with their hands.
Read, interpret and work from drawings, controlled documentation and processes. Self-monitor work progress against area benchmarks to achieve on time product delivery. Record work performed on shop floor management system (ERP). Perform verification of flight hardware and document results in a clear, precise and complete manner. Assist with area efficiency improvement projects.


REQUIRED EXPERIENCE:
High School Diploma or Equivalent. At least 5 years experience using basic mechanical and/or electronics hand tools. Associates Degree or Technical Certification. Experience working and collaborating in a team environment. Experience preferred in fast-paced production environment with flight quality hardware. Excellent communication (written and verbal) and teamwork skills. Excellent concentration and attention to detail with outstanding work efficiency and accuracy. Participation in STEM (Science, Technology, Engineering and Mathematics) related activities, clubs or groups. Computer literate.
Must be willing to work 1st shift, 7:00 AM 5:30 PM. Must be willing to work overtime and weekends as needed. Must be able to lift and carry up to 40 pounds. Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching are generally required to perform the functions of this position.

EDUCATION:
High School Diploma

WORK HOURS:
-5/50, 1st Shift: 7:00AM - 5:00PM
 
Job Number: 161967
Job Location: Hawthorne, CA
Rate: $DOE
Duration: 3 Months
Input Date: 12/11/2017
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

Assembler

Description:
PDS Tech is seeking Assemblers for open positions in Redmond, WA.
  • Assembles fabricated parts at floor stations.
  • Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
  • Uses hand tools and power tools to assemble units according to product specifications. Specific tools used will be tweezers, vacuum wands and torque drivers.
  • Identifies units that fail tests or tolerance levels and repairs as necessary.

This is an opportunity for contract to hire based on individual work performance, attendance/dependability and Client's business needs.



 
As our ideal candidate, you will meet the following requirements:
  • High school diploma or its equivalent.
  • ***candidates must have computer skills and be familiar of how to use a computer***
  • May require 1 year of experience
  • Experience working with microscope; working with microscopic components
  • Must be comfortable with microscope work
  • Soldering skills/experience required
  • Must be able to us tweezers, vacuum wands and torque drivers.
  • Must be able to follow direction, documentation and listening to instruction.
  • Understanding and awareness of chemicals in the work area
  • Must be comfortable working in a hood and a Clean Room gown all day

Special Considerations:

  • Lifting is generally in the 10 to 15 Lbs. range with minimal repetitions.
  • Exposure to machinery, chemical, biological, and physical risks is minimal.

Work Schedule:
1st shift
Mon-Fri 6:30am - 3pm
2nd shift
3pm-11:30pm


 
 
Job Number: 1610061196
Job Location: Redmond, WA
Per Diem: No
Duration: 6 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: 12720 GATEWAY DR S STE 102
City, State: TUKWILA, WA 98168-3333
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G12TAAS&URLSource=cjhunter

Assembler - Level 1

Description:
PDS Tech, Inc. is seeking a candidate for Assembler- Level 1 position located in Lincolnshire, IL.
  • This position will consist of light duty assembly, use of hand tools, and mechanical assembly.
  • It is preferred that candidates have ability to read blueprints, mechanical assembly experience, and ability to follow directions.

  • PPE: Candidates must provide their own safety shoes
  • High school diploma or GED required
  • Must have reliable transportation to site.

 
Job Number: 1710068879
Job Location: Lincolnshire, IL
Duration: 6 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Lea Salmo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JsZMAA0&URLSource=cjhunter

Assembler - Level 1

Description:
PDS Tech, Inc. is seeking a candidate for Assembler- Level 1 in Redmond, WA.
  • Assembles fabricated parts at floor stations.
  • Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
  • Uses hand tools and power tools to assemble units according to product specifications.
  • Identifies units that fail tests or tolerance levels and repairs as necessary. 
  • Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
  • Relies on instructions and pre-established guidelines to perform the functions of the job.
  • Works under immediate supervision. Primary job functions do not typically require exercising independent judgment.
  • Typically reports to a supervisor or manager. Special Considerations: Lifting is generally in the 10 to 15 Lbs. range with minimal repetitions.
  • Exposure to machinery, chemical, biological, and physical risks is minimal. 
  • Position will require regular use of a microscope.


 
  • Operators are required to read and follow work instructions, which requires English comprehension and communication abilities.
  • Position will be in Reeds Fabrication. Machine printing and chemical etching experience preferred.
  • Candidates must have computer skills and be familiar of how to use a computer.
  • Experience working with microscope; working with microscopic components.
  •  

 
Job Number: 1710066215
Job Location: Redmond, WA
Duration: 6 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: 12720 GATEWAY DR S STE 102
City, State: TUKWILA, WA 98168-3333
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021cEBAAY&URLSource=cjhunter

Assembler - Level 1

Description:
PDS is seeking an Assembler for an open position in Redmond, WA.
In your role, you will:

  • Assemble fabricated parts at floor stations.
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications.
  • Use hand tools and power tools to assemble units according to product specifications.
  • Identify units that fail tests or tolerance levels and repairs as necessary.


 
As our ideal candidate, you will meet the following requirements:
  • High school diploma or its equivalent.
  • May be required to complete an apprenticeship and/or formal training in area of specialty.
  • Requires at least 1 year of experience in the field or in a related area. 

Special Considerations:

  • Lifting is generally in the 10 to 15 Lbs. range with minimal repetitions.
  • Exposure to machinery, chemical, biological, and physical risks is minimal.


 
Job Number: 1710064054
Job Location: Redmond, WA
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Luke Polansky
Address: 12720 GATEWAY DR S STE 102
City, State: TUKWILA, WA 98168-3333
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKjVAAW&URLSource=cjhunter

Assembler - Level 2

Description:
PDS Tech is seeking an Assembler for an open position in Muncie, IN

Assembles fabricated parts at floor stations. Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
Uses hand tools and power tools to assemble units according to product specifications.
Identifies units that fail tests or tolerance levels and repairs as necessary. 

 May be required to complete an apprenticeship and/or formal training in area of specialty. May require 2-4 years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. 
 
 
Job Number: 1710066072
Job Location: Muncie, IN
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Lea Salmo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021bIkAAI&URLSource=cjhunter

Assembler - Level 3

Description:
PDS Tech is seeking an Assembler for an open position in Acton, MA

In your role, you will:

    • Ability to accept various assignments in a non-structured, erratic production environment. 

    • Will be reporting to the Production Manager. 

    • Assembles fabricated parts at floor stations. 

    • Tests and calibrates parts and mechanisms to meet tolerances and product specifications. 

    • Uses hand tools and power tools to assemble units according to product specifications. 

    • Identifies units that fail tests or tolerance levels and repairs as necessary. 
    • HS Diploma or GED required 

    • Steel toed shoes required 



    Basic Qualifications: 

    • 1 year of experience in electro-mechanical assembly. 



    Additional Qualifications: 

    • Ability to function as part of a team and contribute to its overall success. 

    • High energy effort to complete tasks, flexibility and capability of working in a constantly changing department. 

    • Basic understanding of analog and digital PCB’s. 

    • Familiar with personal computers and their basic operation. 
     
    Job Number: 1610061012
    Job Location: Acton, MA
    Duration: 6 months
    Input Date: 12/15/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Lea Salmo
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FypSAAS&URLSource=cjhunter

    Assembler - Level 4

    Description:
    PDS Tech is seeking an Assembler for an open position in Houston, TX
    In your role, you will:

      The Assembler / Wire personnel must perform duties to ensure effective wiring and assembly of standard and non standard products

      • Wiring personnel will perform point-to- point marshalling wiring within termination racks, consoles and junction boxes.
      • Will work from wiring database, wire list or engineering drawings

      As our ideal candidate, you will meet the following requirements:
      • Must have knowledge of standard wiring procedures; which includes proper wire routing, stripping, crimping of lugs, torque terminal blocks per specification & proper wire termination.
      • Assemblers must have the ability to assemble products ranging from simple standard sub-assemblies to moderately complex standard systems.
      • Must have the ability to use hand tools, power tools, and other common factory equipment Ingenuity, speed, accuracy, aesthetics, cleanliness and diligence in mounting unistrut, panduit, terminal blocks, channels, switches, relays, mounting brackets, drilling/tapping holes and mounting miscellaneous equipment are the aspects looked at when evaluating mechanical assembly.

       
      Job Number: 1610059797
      Job Location: Houston, TX
      Duration: 6 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Janelie Pizzetulla
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FrfiAAC&URLSource=cjhunter

      Assembler - 2nd shift

      Description:
      PDS Tech, Inc. is seeking an Electro-Mechanical Assembler for an open position in Lincolnton, NC.
       

       
      Job Number: 1710064335
      Job Location: Lincolnton, NC
      Duration: 6 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Roger Greco
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GMAeAAO&URLSource=cjhunter

      Assembler - Level 1

      Description:
      PDS Tech, Inc. is seeking a candidate for Assembler- Level 1 in Redmond, WA.
      Various shifts available. 

      • Assembles fabricated parts at floor stations.
      • Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
      • Uses hand tools and power tools to assemble units according to product specifications.
      • Identifies units that fail tests or tolerance levels and repairs as necessary. 
      • Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
      • Relies on instructions and pre-established guidelines to perform the functions of the job.
      • Works under immediate supervision. Primary job functions do not typically require exercising independent judgment.
      • Typically reports to a supervisor or manager.

      Special Considerations:
      Lifting is generally in the 10 to 15 Lbs. range with minimal repetitions.
      Exposure to machinery, chemical, biological, and physical risks is minimal. 
      Position will require regular use of a microscope.

      Additional qualifications and considerations: 
      Experience using and comfortable with a microscope for assembly and inspection of parts. 
      Experience working in a class 1000 cleanroom. 
      Comfortable working with chemicals and using personal protective equipment. 

       

      • The minimum level of education required for ISC assignments is High School diploma/GED.
      • Suppliers should obtain a copy of the candidates highest level of education (HSD/GED or degree) to avoid delays in onboarding.

       
      Job Number: 1710069437
      Job Location: Redmond, WA
      Duration: 6 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: John Blackmore
      Address: 12720 GATEWAY DR S STE 102
      City, State: TUKWILA, WA 98168-3333
      Phone: 206/763-2840
      800 Phone: 800/678-8644
      Fax Phone: 206/763-3283
      Email: cecjseattle@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002K46JAAS&URLSource=cjhunter

      Assembler - Level 2

      Description:
      PDS Tech, Inc. is seeking a candidate for Assembler - Level 2 in Muncie, IN.
      • Assembles fabricated parts at floor stations.
      • Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
      • Uses hand tools and power tools to assemble units according to product specifications.
      • Identifies units that fail tests or tolerance levels and repairs as necessary.  

      • Requires a high school diploma or its equivalent.
      • May be required to complete an apprenticeship and/or formal training in area of specialty.
      • May require 2-4 years of experience in the field or in a related area.
      • Has knowledge of commonly-used concepts, practices, and procedures within a particular field. 
      •  Assembly and Material Handling experience.


      Special Considerations:
      Lifting will exceed 30 Lbs. and/or repetitions of this or lesser weights will be significant.
      Exposure to substantial machine, chemical, biological or other physical risks are anticipated.
       
      Job Number: 1710068344
      Job Location: Muncie, IN
      Duration: 6 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Lea Salmo
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000012brAAAQ&URLSource=cjhunter

      Assembler - Level 2

      Description:
      PDS Tech, Inc. is seeking a candidate for Assembler - Level 2 in Muncie, IN.
      • Assembles fabricated parts at floor stations.
      • Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
      • Uses hand tools and power tools to assemble units according to product specifications.
      • Identifies units that fail tests or tolerance levels and repairs as necessary.  


       
      • Requires a high school diploma or its equivalent.
      • May be required to complete an apprenticeship and/or formal training in area of specialty.
      • May require 2-4 years of experience in the field or in a related area.
      • Has knowledge of commonly-used concepts, practices, and procedures within a particular field. 
      •  Assembly and Material Handling experience.


      Special Considerations:
      Lifting will exceed 30 Lbs. and/or repetitions of this or lesser weights will be significant.
      Exposure to substantial machine, chemical, biological or other physical risks are anticipated.
       
      Job Number: 1710067002
      Job Location: Muncie, IN
      Duration: 7 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Janelie Pizzetulla
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000021lzHAAQ&URLSource=cjhunter

      Assembler - Level 2

      Description:
      PDS Tech, Inc. is seeking a candidate for Assembler - Level 2 in Muncie, IN.
      • Assembles fabricated parts at floor stations.
      • Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
      • Uses hand tools and power tools to assemble units according to product specifications.
      • Identifies units that fail tests or tolerance levels and repairs as necessary.  

      • Requires a high school diploma or its equivalent.
      • May be required to complete an apprenticeship and/or formal training in area of specialty.
      • May require 2-4 years of experience in the field or in a related area.
      • Has knowledge of commonly-used concepts, practices, and procedures within a particular field. 
      •  Assembly and Material Handling experience.


      Special Considerations:
      Lifting will exceed 30 Lbs. and/or repetitions of this or lesser weights will be significant.
      Exposure to substantial machine, chemical, biological or other physical risks are anticipated.
       
      Job Number: 1710067003
      Job Location: Muncie, IN
      Duration: 7 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Lea Salmo
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000021lzMAAQ&URLSource=cjhunter

      Assembler - Level 3

      Description:
      PDS Tech, Inc. is seeking a candidate for Assembler - Level 3 position located in Owings Mills, MD.

      Responsibilities: 
      • Interpret and work from detailed drawings, assembly drawings, sketches, and verbal instructions as needed 
      • Maintain a well organized, neat, and safe work area 
      • Other duties as assigned by management 
      • Bench-top assembly of material handling equipment for pre-production and production builds.
      • Assembles fabricated parts at floor stations.
      • Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
      • Uses hand tools and power tools to assemble units according to product specifications.
      • Identifies units that fail tests or tolerance levels and repairs as necessary.

      Requires a high school diploma or its equivalent.
      May be required to complete an apprenticeship and/or formal training in area of specialty.
      May require 4-6 years of experience in the field or in a related area.
      Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
      Relies on instructions and pre-established guidelines to perform the functions of the job.
      Works under immediate supervision.
      Primary job functions do not typically require exercising independent judgment.
      Typically reports to a supervisor or manager. 

      Experience in the following: 
      • Read and interpret assembly drawings, schematics, and blueprints 
      • Proper use of basic hand tools as required by application 
      • Skills required to complete tasks as assigned 
      • Basic pneumatics system knowledge 

      Personal characteristics: 
      • Self-motivated 
      • Minimal supervision required 
      • Team player 
      • Flexible 
      • Detail oriented 
      • Timely 
      • Reliable

      Special Considerations:
      Lifting is generally at or below 30Lbs. without significant repetitions.Moderate exposure to machinery. 
       
       
      Job Number: 1710068178
      Job Location: Owings Mills, MD
      Duration: 3 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Lea Salmo
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000012aukAAA&URLSource=cjhunter

      Assembler Level - 1

      Description:
      PDS Tech, Inc. is seeking a candidate for the Assembler Level -1 for an open position located in Niagara Falls NY.
      Job Description: 
      • Performs a variety of operations to assemble precision electromechanical products such as accelerometers, gyros.
      • Performs tasks such as drilling, reaming, burnishing, and tapping; uses precision measuring instruments to ensure conformance to specified tolerances; disassembles precision assemblies and corrects malfunctions.
      • May assemble and modifies pre-production precision units for engineering personnel as directed.
      • May monitor and verify quality in accordance with statistical process or other control procedures

      Mandatory:
      • High school degree or equivalent
      • Two (2) years experience in using a Microscope to assemble miniature part and or assemblies.
      • Experience working in an ISO/clean room/instrument or medical device manufacturing environment.
      • High level of manual dexterity and attention to detail a must
      • Ability to follow procedures, drawings, manufacturing instructions and specifications, documenting work, controlled documents.
      • Ability to identify product issues.
      • IPC-A-610 and/or IPC J-STD-001 certification is desireable.
      • Previous experience in miniature precision devices is desirable.
      • Quality control experience desirable.
      • Good oral communication skills and ability to work in a team environment. 
      • Electro-Mechanical Assembler = Accelerometer Assembler  


      Desired:

      • High school degree or equivalent, and Two (2) years experience in miniature part (microscope) assembly
      • Experience working in an ISO/clean room/instrument or medical device manufacturing environment.
      • High level of manual dexterity and attention to detail a must.
      • Ability to follow procedures, drawings, manufacturing instructions and specifications, documenting work, controlled documents.
      • Ability to identify product issues
      • IPC-A-610 and/or IPC J-STD-001 certification is desireable.
      • Previous experience in miniature precision devices is desirable.
      • Quality control experience desirable.
      • Good oral communication skills and ability to work in a team environment.

       
      Job Number: 1710066563
      Job Location: Niagara Falls, NY
      Duration: 12 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Earl Sawyer
      Address: 2154 N CENTER ST STE 405D
      City, State: NORTH CHARLESTON, SC 29406
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000021jbIAAQ&URLSource=cjhunter

      Assembler Level 3

      Description:
      PDS Tech is seeking an Assembler for an open position in St Louis, MO


      Assembles fabricated parts at floor stations. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Uses hand tools and power tools to assemble units according to product specifications. Identifies units that fail tests or tolerance levels and repairs as necessary. 
      Requires a high school diploma or its equivalent. May be required to complete an apprenticeship and/or formal training in area of specialty. May require 4-6 years of experience in the field or in a related area. Has knowledge of commonly-use
       
      Job Number: 1710066086
      Job Location: Saint Louis, MO
      Duration: 3 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Israel Ireneo
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000021bOEAAY&URLSource=cjhunter

      Assembler Level 3

      Description:
      PDS Tech is seeking a candidate for Assembler- Level 3 in Torrance CA.

      Assembles fabricated parts at floor stations.
      Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
      Uses hand tools and power tools to assemble units according to product specifications.
      Identifies units that fail tests or tolerance levels and repairs as necessary.
      Special Considerations: Lifting is generally at or below 30Lbs. without significant repetitions.
      Moderate exposure to machinery, chemical, biological, and physical risks is anticipated.
      Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures. 
      Requires a high school diploma or its equivalent.
      May be required to complete an apprenticeship and/or formal training in area of specialty.
      May require 4-6 years of experience in the field or in a related area.
       
      Job Number: 1710066129
      Job Location: Torrance, CA
      Duration: 6 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Israel Ireneo
      Address: 1839 S ALMA SCHOOL RD STE 250
      City, State: MESA, AZ 85210
      Phone: 480/929-9922
      800 Phone: 800/657-0997
      Fax Phone: 480/929-9779
      Email: cecjphoenix@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000021bdPAAQ&URLSource=cjhunter

      Assembler Level 3

      Description:
      PDS Tech is seeking a candidate for Assembler- Level 3 in Torrance CA.

      Assembles fabricated parts at floor stations.
      Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
      Uses hand tools and power tools to assemble units according to product specifications.
      Identifies units that fail tests or tolerance levels and repairs as necessary.
      Special Considerations: Lifting is generally at or below 30Lbs. without significant repetitions.
      Moderate exposure to machinery, chemical, biological, and physical risks is anticipated.
      Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures. 
      Requires a high school diploma or its equivalent.
      May be required to complete an apprenticeship and/or formal training in area of specialty.
      May require 4-6 years of experience in the field or in a related area.
       
      Job Number: 1710066126
      Job Location: Torrance, CA
      Duration: 6 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Israel Ireneo
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000021bd5AAA&URLSource=cjhunter

      Assembler Level 3

      Description:
      PDS is seeking an Assembler for an open position in Plymouth, MN.  

      Assembles fabricated parts at floor stations. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Uses hand tools and power tools to assemble units according to product specifications. Identifies units that fail tests or tolerance levels and repairs as necessary. 
      Requires a high school diploma or its equivalent. May be required to complete an apprenticeship and/or formal training in area of specialty. May require 4-6 years of experience in the field or in a related area. 
       
      Job Number: 1710065423
      Job Location: Minneapolis, MN
      Duration: 5 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Janelie Pizzetulla
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000021XCLAA2&URLSource=cjhunter

      Assembler/Integrator

      Description:
      PDS Tech is seeking a candidate for the Assembler/Integrator position located in Madison, AL.  
      The successful candidate will be required to perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies.
      Additional duties will include printing labels required for unit identification, serialization, revision level, and cage code information.
      Experience with Bartender label printing software (or similar), Intermec and Rayjet laser printers desired.
      Some knowledge of Microsoft Office Suite programs. 
      May conduct quality inspections on the production line in accordance with quality specifications.
      May disassemble, modify, rework, reassemble, and test production or prototype assemblies and subassemblies according to specifications including bills of material and work instructions. Experience working from drawings and diagrams. 

      Basic Requirements:
      • Must be a team player
      • Strong interpersonal skills.
      • Must be able to work in a fast paced environment.
      • Must have strong communication skills 

      *# of Years Experience 2 years additional education and/or experience 
        
      *Educational Requirements:  High School 
        
      *Please specify any Other Details/Requirements for this position: US CITIZENSHIP IS REQUIRED 
       
      Job Number: 1710067532
      Job Location: Madison, AL
      Duration: 12 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Enrique Perez
      Address: 3201 CHERRY RIDGE DR STE A103
      City, State: SAN ANTONIO, TX 78230-4824
      Phone: 210/524-1496
      800 Phone: 866/570-1503
      Email: cecjsanantonio@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000012RlqAAE&URLSource=cjhunter

      Assembler- MA

      Description:
      Chipton Ross is seeking an Assembler in Marion, MA

      Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

      Mandatory:
      Ability to read/comprehend MEIs, PWIs and manufacturing prints supplied and assemble various products meeting IPC 610 standards and customer requirements.

      Desired:
      Soldering experience, Ability to read/comprehend documentation written in English Good communication skills. Ability to learn and follow written instructions.
       
      Job Number: 160418
      Job Location: Marion, MA
      Rate: $15 to $17.00 DOE
      Duration: 1 year
      Input Date: 12/11/2017
      Firm Name: CHIPTON ROSS
      Attention: Johnnie Barrientos
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: jbarrientos@chiptonross.com
      Website: www.chiptonross.com

      Assembly Mechanic - Level 2

      Description:
      PDS Tech is seeking an Assembly Mechanic for an open position in Garden Grove, CA

      Job Responsibilities: * Operating a Resistance Soldering Unit using Sn96 solder, soldering of ridge and flexible satellite waveguide components. * Sets up and maintains solder equipment ensuring good working condition. * Apply Sn96 solder utilizing capillary soldering application. * Take dimensional measurements, compare to manufacturing drawings/specifications and make manual adjustments to waveguide units to bring into compliance. * Complete and maintain production documentation on travelers. Minimum Requirements:
      Must have a High School Diploma or equivalent. Solder certificate or vocational training desired. * Solder certification (DoD 1866) is strongly desired. * Minimum of 5+ years experience soldering. * Prior aerospace, machining, automotive or sweat joint soldering experience desired. * Ability to read and understand drawings, schematics, blue prints, and work instructions. * Experience working in an environment of continuous process improvement. AS9100 experience desired. * Good interpersonal skills and ability to work effectively with others. * Excellent communication skills, both oral and written. English proficiency is required. * Needs to be self-motivated and work independently on assignments with minimal oversight or direction. * Ability to interact effectively with supervision, management and customer representatives. * High attention to detail and data accuracy. * Demonstrated knowledge of workplace Health & Safety requirements.
       
      Job Number: 1610059585
      Job Location: Garden Grove, CA
      Duration: 6 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Janelie Pizzetulla
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FqRKAA0&URLSource=cjhunter

      Assembly Mechanic - Level 1

      Description:
      PDS Tech, Inc. is seeking a candidate for Assembly Mechanic - Level 1 position located in Memphis, TN.

      In your role, you will:

      • Constructs, maintains, and tests mechanical equipment, machinery, and components.
      • Identifies parts for replacement and machines that need new parts and places orders as necessary.


      Special Considerations:

      • Lifting is generally at or below 30Lbs. without significant repetitions.
      • Moderate exposure to machinery, chemical, biological, and physical risks is anticipated.
      • Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures. 

      • Requires a high school diploma or its equivalent.
      • May be required to complete an apprenticeship and/or formal training in area of specialty.
      • May require 0-2 years of experience in the field or in a related area.
      • Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
      • Relies on instructions and pre-established guidelines to perform the functions of the job.
      • Works under immediate supervision. 

       
      Job Number: 1710067388
      Job Location: Memphis, TN
      Duration: 7 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Shannon White
      Address: P O BOX 619820
      City, State: DALLAS, TX 75261-9820
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9636
      Email: cecjnrt@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000012QiKAAU&URLSource=cjhunter

      Assembly Tech II

      Description:
      PDS Tech is currently needing Assembly Technicians swing shift in Chandler, AZ.  Please reach out to Jonas Lindner at:  480.212.0845 or jlindner@pdstech.com

      Performs a wide variety of electronic or electro-mechanical assembly operations on assemblies or sub-assemblies.  Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering and cable harnessing on assembly units.  Makes setups and adjustments holding tolerances to blueprint specs.
      Performs specific back-end semiconductor mfg. functions in the production of semiconductor devices.  Operates various equipment in performing functions such as wafer scribe and break, die sort, die attach, lead bonding and seal, test, or mark and pack.
      • Build mechanical assemblies and sub-assembles
      • Must be able to read pneumatic and electrical schematics
      • Responsible for helium leak testing, cabling, module and sub-assembly testing
      • Operates hand and power tools to complete assemblies
      • Reads and interprets work instructions to ensure accuracy of work performed.
      • Interacts with mgmt. and team members to encourage effective communications on production floor
      • Performs standard testing and minor troubleshooting
      • Ensures quality standards are met throughout all steps of the assembly process
      • Attendance is essential
      • Knowledge of operating hand tools, portable power tools and bench tools
      • Strong attention to detail, quality focused and willing to learn
      • Excellent communication skills
      • Basic computer skills and the ability to operate computer terminals
      • 3 plus years experience in mfg./cleanroom environment
      • Performs other duties as required.


       

       
      Job Number: 1710069740
      Job Location: Chandler, AZ
      Duration: 6 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Jonas Lindner
      Address: 1839 S ALMA SCHOOL RD STE 250
      City, State: MESA, AZ 85210
      Phone: 480/929-9922
      800 Phone: 800/657-0997
      Fax Phone: 480/929-9779
      Email: cecjphoenix@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CnlhAAC&URLSource=cjhunter

      Aviation Mechanics - Clearance

      Description:
      Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

      Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
      Several Openings For:
      • General Mechanic
      • Electrical
      • Structures
      • Avionics Tech
      • Quality Inspection
      • Supply Chain Specialist


      Great Opportunity for Ex-military/Exiting Military/ and Veterans
      Previous military experience a plus!


       
      Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
      Required- Minimum of 5 years' experience working on 747 platform.
      Tools: no tools required
      Location: San Antonio, Texas

      ***Current Security Top Secret Clearance required
      US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

      **submittal must reference Job ID number 1710063637

      Camille Zunker- czunker@pdstech.com
       
      Job Number: 1710063637
      Job Location: San Antonio, TX
      Duration: 12 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Camille Zunker
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Avionics Engineer

      Description:
      A leading Aerospace company, located in Canoga Park, CA, is seeking a Principal Engineer - Avionics, for a 8+ month contract role.

      ** Candidates must be U.S. Citizens **
      ** Permanent residents are NOT eligible for this role **
      ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

      -Support Electro-Mechanical Packaging of complex electrical/electronic assemblies required.
      -Extensive experience in Creo design required.
      -Candidate must have strong GD&T and tolerance analysis skills required.
      -Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.
      -Experience in design of cables and harnesses for applications for Aerospace products.
      -Proficiency in use of Creo PDM/Link and Windchill.
      -Proficiency in generating drawings is required.

      Skills:
      -Electronic-Mechanical Packaging Design a must.
      -ProE/Creo CAD design a must.
      -GD&T a must.
      -Electronic packaging design for harsh environments.
      -Design of cables and harnesses.
      -Drawing Generation.
      -Tolerance Stack-up analysis.
      -Creo PDM/Link and Windchill.

      Education:
      -BSME with 10 years of experience or 15 + years of equivalent experience.
       
      Job Number: 12241
      Job Location: Canoga Park, CA
      Rate: Open
      Per Diem: Yes
      Overtime: Possible
      Duration: 8 Months+
      Start Date: October
      Input Date: 10/30/2017
      Firm Name: LOGIN CONSULTING SERVICES
      Attention: Tali Lerea
      Address: 300 CONTINENTAL BLVD STE 530
      City, State: EL SEGUNDO, CA 90245-5067
      Phone: 310/607-9091
      Fax Phone: 310/607-9818
      Website: www.loginconsult.com

      BFTC A/C Configuration Controller -WIC04059

      Description:
      PDS is looking for a BFTC A/C Configuration Controller:












      In your role, you will:



      • Ensure (through discussion with Engineering and the Flight Crew) that proposed aircraft configuration changes, will not adversely affect upcoming ground or flight tests
      • Ensure that detailed aircraft configuration requirements (FTE Set-up Sheets) are met
      • Prepare, coordinate and authorize work to be performed on the aircraft, including development of the nightly work package
      • Act as the primary point of contact to authorize all work performed on the flight test aircraft
      • Prepare Pre-flight/Pre-Test Aircraft Configuration Briefing report and conduct briefings
      • Attend Post-flight/Post-Test debrief meetings and perform follow up coordination activities for discrepancies reported during testing
      • In coordination with Quality Assurance, plan and coordinate the timely execution of all Airworthiness Maintenance requirements, and maintain the tracking and timing of inspections, time life items and special maintenance items
      • Work closely with the Flight Crew and is familiar with the aircraft test schedule
      • Assist Lead Flight Test Engineer with the development of the short-term flight test schedule by providing input for upcoming maintenance, inspection and down time requirements.
      • Attend daily meetings associated with aircraft support issues and status briefings
      • Support offsite testing as required
      • Manage deferred maintenance items and coordinate resolution
      • Assist Project and Ground Operations with the development of downtime planning activities

























      Qualifications












      As our ideal candidate,



      • You must have 5-7 years of experience in the aircraft maintenance field as a Mechanic, Technician, or Inspector.
      • You must have 3-5 years of flight test experience
      • You must have the conflict resolution skills necessary to resolve daily issues in a professional manner
      • You must have a willingness to work weekend days and nights
      • You must have a willingness to work overtime
      • You must have a willingness to travel
      • You must be able to obtain a Canadian Work Permit


























       
      Job Number: 1710068929
      Job Location: Wichita, KS
      Duration: 12 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Marjorie Santiago-Marquez
      Address: 11828 W CENTRAL STE 100
      City, State: WICHITA, KS 67212-5129
      Phone: 316/729-1800
      800 Phone: 800/333-8644
      Fax Phone: 316/729-1857
      Email: cecjwichita@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JtHNAA0&URLSource=cjhunter

      Bleed Air Designer (7 needed)

      Description:
      The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

      Duties and Responsibilities:
      1. Prepare 3D layout models of the BAS and VCS.
      2. Prepare 3D installation and detail models of the BAS and VCS.
      3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

      Education, Work Experience, Certification and/or Licensure:
      1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year
      college or university program
      2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.
      3. Minimum 3+ years’ experience utilizing Catia V5 3D modeling software

      Knowledge, Skills and Abilities:
      1. Ability to create 3D models utilizing CATIA V5.
      2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
      3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
       
      Job Number: 28-011
      Job Location: Greensboro, NC
      Rate: $50 - 60/hr May pay more DOE
      Per Diem: Yes
      Overtime: Yes
      Duration: 1 Year plus
      Start Date: ASAP
      Input Date: 12/12/2017
      Firm Name: PRECISION PERSONNEL INC
      Attention: Matt
      Address: 600 CLEVELAND ST STE 700
      City, State: CLEARWATER, FL 33755
      Phone: 727/449-0600
      800 Phone: 877/600-2333
      Fax Phone: 727/449-0627
      Email: matt@precisionpersonnel.com
      Website: www.precisionpersonnel.com

      Bleed Air System & Vapor Cycle System Design Engineer

      Description:
      General Summary: 
      The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.
       
      Duties and Responsibilities:

      • Prepare 3D layout models of the BAS and VCS
      • Prepare 3D installation and detail models of the BAS and VCS
      • Prepare 2D installation, assembly and detail drawings of the BAS and VCS
      • Work in a team environment supporting liaison engineering to research root cause and address production discrepancies

      Qualifications:
       
      Education, Work Experience, Certification and/or Licensure:



      • Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
      • 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS


       
      Knowledge, Skills and Abilities:

      1.        Experience using CATIA V5 to prepare 3D parametric models and 2D drawings; minimum of 5 years of experience
      2.        Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia)
      3.        Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS
       


       
      Job Number: 1710069638
      Job Location: Greensboro, NC
      Duration: 12 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Lucinda Contreras
      Address: 900 CIRCLE 75 PKWY SE STE 600
      City, State: ATLANTA, GA 30339
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CnEQAA0&URLSource=cjhunter

      CAD Designer

      Description:
      PDS Tech, Inc. is seeking a candidate for CAD Designer in Plymouth​, MI. 

      • Collaborate and work with cross-functional teams including Application Engineering, Product Engineering, Core Technologies, Manufacturing and Supply Base to ensure a robust design. Tier 1 automotive and commercial vehicle supplier working directly with customers on engine package study to define a turbocharger to fit in their engine environment. 
      • Manage turbocharger assembly and BOM in the CAD. 
      • Focus on part re-use and standardization. 
      • Create design layouts with stack up studies to confirm form, fit and function of the product. Cast/machine and rotating component design. 
      • Create final 3D models and drawings respecting HTT design standards. 
      • Participate and lead meetings with internal teams and customers. 
      • Supplier interface 
      • Partner with the Global Design Engineering team to leverage the required resources to meet the design objectives and program timing. 
      • Use of manufacturing best practice to optimize components costs. 
      • Partner with the Global Design Engineering team to leverage the required resources to meet the design objectives and program timing. 
      Basic Qualifications: 
      • Bachelor’s Degree in Mechanical Engineering and 3 years minimum experience of CAD design in CATIA. 
      • 1+ year experience internal combustion engines and turbochargers preferable 
      • 3+ years experience in automotive engine packaging design preferable 
      •3+ years experience Geometric Dimensioning & Tolerancing ASME Y14.5-1994 Knowledge preferable 

      Additional Qualifications: 
      • Experience with SmarTeam and Enovia/MatrixOne or other PLM systems. 
      • Experience in casting and machine process preferred. 
       
      Job Number: 1710067709
      Job Location: Plymouth, MI
      Duration: 7 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Israel Ireneo
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000012YSNAA2&URLSource=cjhunter

      CNC Machinist - 4/5 Axis Mill - 3rd shift

      Description:

      PDS TECH INC is currently looking for a CNC Machinist - 4/5 Mil - 3rd shift for our client in Torrance.

      Must be able to set up and operate manual and CNC Mills. Capable of holding tight tolerances associated with the machining of precision parts. Must be able to read blueprints and interrupt written work instructions. Prior experience 4 and 5 multi-axis Mills

      Employee will work in a machine cell where he/she will be responsible for the operation of 1 or more machnies at a time, depending on production needs. Employee must be comfortable multi-tasking in a fast paced environment.

      Candidate must possess 3 years of Machinist experience (NOT SIMPLY MACHINE OPERATION). Must be comfortable setting-up and troubleshooting mechanical issues with CNC Machines. Must also be comfortable using various measuring equipment such as Micrometers, Calipers, and Dial Bore Gauges. 
      **Gear and/or grind experience a plus**

      High School diploma or GED required. 
      Machining trade a plus.
      Required skills:-Experience in aerospace systems and/or high performance control systems preferred
      -A Minimum of 3 years of manufacturing engineering experience – preferably with at least 1 year managing projects.
      -Training and Experience in LEAN
      Scope:Primary responsibilities will be on developing and creating operations flow documentation, performing prove-out processes, assisting in driving quality processes internally and from suppliers, and performing standard work in manufacturing engineering. You will also support project-oriented work such as investigating new capital expenditures for equipment, developing new or improved processes for parts, in-sourcing or out-sourcing activities, and continuous improvement projects.
      Education:-Bachelor of Science or Masters of Science Degree in a Technical Field – preferably Mechanical, Manufacturing, or Industrial Engineering.

       
      Job Number: 1710072085
      Job Location: Torrance, CA
      Duration: 6 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Karla Pelonis
      Address: 370 N WESTLAKE BLVD STE 120
      City, State: WESTLAKE VILLAGE, CA 91362
      Phone: 805/418-9862
      800 Phone: 866/458-4322
      Fax Phone: 805/418-9866
      Email: cecjwestlake@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i5000000239vYAAQ&URLSource=cjhunter

      Cabinet Finisher

      Description:
      Under general supervision, prepares and applies finishes to aircraft furniture using aircraft specifications, designs and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship.
       
      Principal Duties and Responsibilities:
      Works under general supervision to prepare furniture for finish and disassembly using blueprints, aircraft specifications and design/engineering drawings.
      Performs high quality repairs to various finished surfaces in the shop and aboard aircraft. Cleans and polishes blemishes as needed to prepare the aircraft for delivery.
      Applies finish to furniture using spray equipment and other manual/mechanical methods.
      Uses various types of sandpapers, polishes, adhesives, masking mediums, solvents, finish materials, hand tools and various power tools to disassemble and finish furniture.
      Complies with all safety, 5S, and housekeeping policies.
      Uses personal protective equipment to protect aircraft interior (PTP).
      Uses the material tracking system to create parts demand, track squawks and to sign-off work.
      High school diploma/GED.Two (2) years experience in wood finishing. Experience in aerospace industry preferred. Basic knowledge of cabinet finishing processes and products.
      Autobody work or wood finishing experience a plus.
      Mon-Fri Days
       
      Job Number: 1710070034
      Job Location: Appleton, WI
      Duration: 12 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Tyler Belisle
      Address: 11828 W CENTRAL STE 100
      City, State: WICHITA, KS 67212-5129
      Phone: 316/729-1800
      800 Phone: 800/333-8644
      Fax Phone: 316/729-1857
      Email: cecjwichita@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CpIEAA0&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Calibration Technician -

      Description:
      JSG is looking for a Calibration Technician for a 15 Month Contract Opportunity with our client in Coatesville, PA


      ASSIGNED DUTIES:

      Recall calibrated tooling periodically in accordance with company's master calibration schedule.
      Send complex calibrated tooling out to a calibration vendor for periodic inspection/maintenance.
      Perform simple calibrations in-house in accordance with Sikorsky and NIST (National Institute of Standards and Technology) procedures.
      Maintain certification documentation for each piece of Sikorsky PA’s calibrated tooling.
      Follow broad instructions and general methods to work from metrology procedures and standards, tool designs, engineering drawings, etc., to perform inspection and calibration duties.
      Set up and operate a variety of precision gages and instruments, and perform complex layouts, to inspect and calibrate tools to metrological standards.
      Repair, adjust micrometers, height gages, vernier calipers
      Maintain close liaison with other departments to resolve metrology problems.
      Troubleshoot/repair testing equipment; have a working knowledge of electricity, circuitry, and mechanical components.
      Demonstrate knowledge of the technical standards for establishing calibration set out by the American Society of Testing and Materials.
      Skills Required:

      Candidate must demonstrate excellent math skills (emphasis on trigonometry and geometry) and be able to analyze numerical data
      Candidate must demonstrate computer literacy; with emphasis on Microsoft Access and Excel for data management.
      Experience Required:

      Minimum High School Diploma or Equivalent Required
      Formal education in Calibration Technology; or American Society for Quality (ASQ) Certified Calibration Technician certification Required
      Demonstrated aerospace metrology experience or Military calibration experience required
       
      Job Number: 358918
      Job Location: Coatesville, PA
      Rate: $21.50hr
      Per Diem: no
      Overtime: Yes
      Duration: 15 months
      Start Date: asap
      Input Date: 10/19/2017
      Firm Name: JOHNSON SERVICE GROUP
      Attention: Rich Martinsen
      Address: 950 S BASCOM AVE STE 2122
      City, State: SAN JOSE, CA 95128
      Phone: 408/728-9510
      800 Phone: 866/656-0539
      Fax Phone: 408/271-2701
      Website: www.jsginc.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Catia V5 Design Checker

      Description:
      1. CATIA Knowledgeware and SmarTeam experience desirable.
      2. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
      3. Experienced in engineering review of 3D models and PLM data for integration criteria including, but not limited to, system separation, clash analysis, kinematics and standard part usage is desirable.
      4. Experience with mechanical assemblies and manufacturing technique design.
      5. Excellent communication skills, written and verbal. Ability to lead daily sign off meetings.
      6. Use and understanding of Dimensioning and Tolerancing including familiarity with ASME Y14.5 a must.
      7. Use of Microsoft Word, Excel and Power Point for creation of reports.
       
      Job Number: 24-171
      Job Location: Savannah, GA
      Rate: $50-$55/hr
      Per Diem: YES
      Overtime: YES
      Duration: 1 yr+
      Start Date: ASAP
      Input Date: 09/01/2017
      Firm Name: PRECISION PERSONNEL INC
      Attention: Matt
      Address: 600 CLEVELAND ST STE 700
      City, State: CLEARWATER, FL 33755
      Phone: 727/449-0600
      800 Phone: 877/600-2333
      Fax Phone: 727/449-0627
      Website: www.precisionpersonnel.com

      Certification Expert - Fire Protection

      Description:
      This position is located in Nagoya, Japan.

      PDS Tech is seeking a Certification Expert for the Mechanical System Design Group/ Fire Protection System Team, Regional Jet Development Project.

      The Engineer will work and lead activities of Fire Protection System (FPS) Team reporting to the CM in this role.
      Within the airworthiness tasks, the demonstration of compliance process includes the Independent Checking of the Demonstration of Compliance of documents produced by the Design Organization, which need airworthiness release. The independent checking is performed by the Compliance Verification Engineer (CVE).
      • Proven ability to work to challenging deadlines.
      • New Product Introduction is desirable.
      • 10+ years engineering experience 
      • Experience leading multidisciplinary Teams
      • Certification knowledge.
      • Bachelors Degree in Engineering
      • International experience desirable. 
      • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

       
      Job Number: 1610053086
      Job Location: Nagoya,
      Duration: 36 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: John Blackmore
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000001tTiiAAE&URLSource=cjhunter

      Circuit Card Assembly Specialist

      Description:
      PDS Tech Inc. is seeking Circuit Card Assembly Specialists for an expanding program in Huntsville, AL.
      • Performs all Circuit Card production assembly operations on electronic/electrical assemblies and subassemblies.
      • Performs simple rework and modification to circuit card parts and assemblies.
      • Provides maintenance on machines and tooling and machine set up tasks to prepare machines for production activity following the machine inspection checklists.
      • Documents results in accordance with applicable procedures.
      • Collects and inputs data for statistical process control analysis.

      Work related skills equivalent to 3 years of circuit card related technical experience
      Associates (2-year) degree in electronics, mechanical or other technical discipline 

      Basic Manufacturing Skills

      Basic Electricity

      Circuit Card Assembly (CCA) experience

      J-standard soldering certified

       
       
      Job Number: 1710072262
      Job Location: Huntsville, AL
      Duration: 12 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Enrique Perez
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000023APlAAM&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Completions Design Engineer

      Description:
      Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Final Phase Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation.Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area.
       
      Job Number: 24-179
      Job Location: Savannah, GA
      Rate: $58.00 - $63.00
      Per Diem: Yes
      Overtime: Yes
      Duration: 1 Year plus
      Start Date: ASAP
      Input Date: 09/01/2017
      Firm Name: PRECISION PERSONNEL INC
      Attention: Matt
      Address: 600 CLEVELAND ST STE 700
      City, State: CLEARWATER, FL 33755
      Phone: 727/449-0600
      800 Phone: 877/600-2333
      Fax Phone: 727/449-0627
      Website: www.precisionpersonnel.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Component Design Engineer in East Aurora, NY #4916AS

      Description:
      Recruiter to Contact: Adam Salazar
      Job Title: Design Engineer
      Job Number: 4916
      Location: East Aurora, NY
      Compensation: DOE
      Assignment Length: 12 Month
      2 openings

      GENERAL FUNCTION:

      This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components and systems that will become the new products of Moog, Inc. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.

      DIMENSIONS:

      Expected annual production sales from projects: $4M to $10M

      NATURE AND SCOPE:

      A variety of technical functions exist within the Design/Development Engineering Department. Reporting to the division's Chief Engineer typically are Associate Engineers, Development Engineers, Design and Project Engineers, Senior Design and Senior Project Engineers, Senior Staff Engineers, and Principal Engineers, as well as Engineering Managers, Section Heads or Group Leaders. The Design Engineer typically reports to an Engineering Manager, Section Head or Group Leader within the department and on demanding projects he/she might work under the leadership of a Senior Design Engineer. The incumbent receives instructions on specific assignment objectives, complex features, and possible solutions. He/She is expected to make independent and unreviewed decisions on routine technical matters. However, assistance is furnished on unusual problems and work is periodically reviewed for application of sound professional judgment.

      The Design Engineer is a key contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. The products of Moog generally are unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The Design Engineer generally will operate as part of a design/development team, which includes other Department engineers with his/her primary concern being component design. The incumbent must effectively coordinate the work of drafters, technicians, and others who assist in specific assignments.

      In the early stages of a new program, the project team will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations. Under the technical direction of the Engineering Manager, Section Head or the team's lead engineer, the Design Engineer will then guide the evolution of the conceptual design, technical project planning, detail design, and development testing. This requires some travel and the participation in presentations to customers.

      The Design Engineer will apply creative skills to generate designs that fulfill the conflicting requirements of meeting performance goals, robustness over extreme conditions, minimum weight, awkward envelopes, and cost effectiveness. Successful mechanical designs require judicious material selection, effective use of stress analysis, and sometimes design of unique kinematic mechanisms. Successful electrical designs require intelligent component selection and effective use of thermal stress analysis. Circuit designs must be reliable and make optimal use of available space.

      To be considered for the position of Design Engineer, a candidate should have a minimum of an MS Degree, preferably in Mechanical, Aeronautical or Electrical Engineering plus three years of design/development engineering experience. As an alternative, the candidate would have a BS Degree plus six years minimum of design/development engineering experience. To fulfill the demands of design and development of new products the individual must have self-starting instincts and strong analytical skills. A Mechanical Design Engineer should have a good sense of three dimensional spatial orientation and seasoned knowledge of mechanical hardware design. An Electrical Design Engineer should have solid knowledge of circuit design and a wide range of electrical components.

      Basic knowledge of closed loop control systems and good communication skills is also necessary.

      ACCOUNTABILITIES:

      1. Contribute to the development of new product requirements through consulting with customers and sales personnel.

      2. Validate conceptual problem solutions by performing trade studies and analyses.

      3. Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.

      4. Operate as a key element in a team of creative, independent individuals.

      5. Represent Moog in a manner consistent with its technical reputation.

      6. Create reliable designs through a comprehensive experimental development test program.

      7. Document designs, analyses, and test results with accurate and concise repo
       
      Job Number: #4916AS
      Job Location: East Aurora, Ny
      Rate: 50/hr W2 Ceiling rate
      Per Diem: N/A
      Duration: 12 Months+
      Start Date: ASAP
      Input Date: 09/22/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Adam Salazar
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Website: www.midcom.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Component Product Engineer

      Description:
      A leading Aerospace company, located in Canoga Park, CA, is seeking a Project Engineer / Component Product Engineer III - IV (Valves & Actuators) for a 6+ month contract role.

      ** Candidates must be U.S. Citizens **
      ** Permanent residents are NOT eligible for this role **
      ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


      ** This is NOT a Designer role. Please make sure that all candidates with a Designer background or expectation are aware of this **
      ** Manager only wants to see local candidates at this time **

      Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.

      Skills:

      25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
      25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
      20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
      10%: Develops trade studies, design concepts, systems integration and component-level test plans.
      10%: Supplier integration with external vendors
      10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

      Education:
      -Bachelor's degree in Mechanical or Aerospace Engineering.
       
      Job Number: 12465
      Job Location: Canoga Park, CA
      Rate: Open
      Per Diem: Yes
      Overtime: Possible
      Duration: 6 Months+
      Start Date: September
      Input Date: 09/21/2017
      Firm Name: LOGIN CONSULTING SERVICES
      Attention: Tali Lerea
      Address: 300 CONTINENTAL BLVD STE 530
      City, State: EL SEGUNDO, CA 90245-5067
      Phone: 310/607-9091
      Fax Phone: 310/607-9818
      Website: www.loginconsult.com

      Component Product Engineer (Project Engineer) II/III (8) - CA

      Description:
      Chipton-Ross is seeking a Component Product Engineer (Project Engineer) II/III (8) for an opening in Canoga Park, CA.

      RESPONSIBILITIES:
      25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
      25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
      20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
      10%: Develops trade studies, design concepts, systems integration and component-level test plans.
      10%: Supplier integration with external vendors
      10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

      REQUIRED EXPERIENCE:
      -Project Engineer
      -Component Engineering
      -Languages: English - Read, Write, and Speak

      EDUCATION:
      A Bachelor's degree in Mechanical or Aerospace Engineering.

      WORK HOURS:
      5/40, Full-Time
       
      Job Number: 164956
      Job Location: Canoga Park, CA
      Rate: $DOE
      Duration: 6 Months
      Input Date: 12/17/2017
      Firm Name: CHIPTON ROSS
      Attention: Debbie Aubert
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: daubert@chiptonross.com
      Website: www.chiptonross.com

      Component Product Engineer (Project Engineer) II/III

      Description:
      Location: Canoga Park, CA
      Rate: $35.00 - $48.00/HR
      Duration: 6 month contract


      ** Candidates must be U.S. Citizens **
      ** Permanent residents are NOT eligible for this role **
      ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


      Duties:
      **This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **
      **Candidates should have 2 to 8 years of related work experience. No recent college graduates please**
      **Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware**


      Skills:
      - 25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
      - 25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
      - 20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
      - 10%: Develops trade studies, design concepts, systems integration and component-level test plans.
      - 10%: Supplier integration with external vendors
      - 10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.


      Education:
      - A Bachelor's degree in Mechanical or Aerospace Engineering.
      - Candidates should have 2 to 8 years of related work experience. No recent college graduates please.
       
      Job Number: 7819
      Job Location: Canoga Park, CA
      Rate: $35.00 - $48.00/HR
      Per Diem: Split Possible
      Overtime: Possible
      Duration: 6 mos
      Input Date: 12/12/2017
      Firm Name: INCONEN CORPORATION
      Attention: Patrick O'Neil
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Email: patrick@inconen.com
      Website: www.inconen.com

      Component Product Engineer (Project Engineer) II/III / local preferred URGENT CA

      Description:
      160209/7333281

      8 open positions

      48/hr max

      Manager is currently interviewing.

      Job Title: Component Product Engineer (Project Engineer) II/III



      Duties:
      ** Candidates must be U.S. Citizens **

      ** Permanent residents are NOT eligible for this role **

      ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



      ** This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **



      * Candidates should have 2 to 8 years of related work experience. No recent college graduates please *



      Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.

      Skills:
      25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
      25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
      20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
      10%: Develops trade studies, design concepts, systems integration and component-level test plans.
      10%: Supplier integration with external vendors
      10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

      Education:
      A Bachelor's degree in Mechanical or Aerospace Engineering.

      Skills:
      Required

      PROJECT ENGINEER COMPONENT ENGINEERING

      State/Province: California
      City/Town: Canoga Park

      Start Date: 09/11/2017 Hours Per Week: 40.00
      Est. End Date: 03/11/2018 Hours Per Day: 8.00
      Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
       
      Job Number: MB-7333281
      Job Location: Canoga Park, CA
      Rate: 48/hr max
      Duration: 6 month contract
      Input Date: 12/15/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Jeana Edrozo
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Email: jeana@midcom.com
      Website: www.midcom.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Composite Door Engineer

      Description:
      Composites Door Engineer guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

      Principal Duties and Responsibilities:

      Essential Functions: 1. selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative CATIA V5 Experience Required Mechanical Systems Experience Required Composite Door Experience Desired Supplier Management Experience Desired


      Education and Experience Requirements:
      Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in the specific technical discipline or 15 yrs. broad engineering experience in several technical disciplines with Bachelors, or 8 yrs. in the specific technical discipline with Masters, or 6 yrs. in the specific technical discipline with PhD.
       
      Job Location: Savannah, GA
      Rate: Open
      Per Diem: Possible
      Overtime: Possible
      Duration: LT
      Start Date: ASAP
      Input Date: 12/01/2017
      Firm Name: AMERICAN CYBERSYSTEMS
      Attention: Andrew Walbert
      Address: 1750 112TH AVE NE STE C228
      City, State: BELLEVUE, WA 98004
      Phone: 425/605-2321
      Fax Phone: 425/558-0688
      Website: www.acsicorp.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Composite Structural Design Engineer (6 openings)

      Description:
      Composite Structural Design Engineer (6 openings)
      Location: Mojave, CA
      Duration: 12+ months
      Hourly rate: Open, DOE
      Desired Skills: MICROSOFT OFFICE;CATIA; Structural design of primary and secondary composite aircraft structure.
      Composite Structural Design Engineer Job Description
      Perform preliminary and detail design of metallic and composite structure, including initial sizing of joints, structure layout and design for manufacturability.
      Create 3D/2D definition of parts, assemblies and installations.
      CATIA V5, Composites workbench is a plus.
      Establish manufacturing tolerances for production of structural components using GD&T.
      Participate in the Engineering definition review, approval and release process
      Support the review of manufacturing plans and procedures to ensure compliance with design requirements
      Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements
      Works with Industrial Design team to develop conceptual designs for cabin interior
      Develops rapid prototypes for evaluation throughout design development process
      Develops 3D CAD models and 2D engineering definition for detail parts, assemblies, and installations inside the pressurized cabin
      Establishes manufacturing tolerances for production of structural components
      Develops and documents system requirements and interface constraints for components
      Coordinates with Analysis and Testing departments to ensure component performance in flight environments
      Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
      Participates in the review, approval, and release process of engineering definition
      Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes .
      Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
      Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)
      Educational Requirements
      Bachelor's degree from an accredited institution, with a concentration in Aeronautical and Astronautical, Aerospace, or Mechanical Engineering..
      Composite Structural Design Engineer requirements:
      3 years or more experience design engineering for aerospace composite fabrication and assembly processes.
      Proficient with CATIA V5
      Required Workbenches: Part Design, Assembly Design, Sketcher, Drafting, Wireframe and Surface Design
      Desired Workbenches: Generative Shape Design (GSD), Composites (CPD) Experience using GD&T and ASME Y14.5M-1994 drafting standards
      Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
      Experience designing for aerospace environments
      D_ _esired Experience in the development of human spaceflight hardware desired
      Experience with Product Lifecycle Management (PLM) software and configuration management processes
      Excellent analytical and decision-making skills Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.
      Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook
      Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
      Composite Structural Design Engineer
      The Structures Company, LLC is an AA/EOE.
       
      Job Location: Mojave, CA
      Rate: "open"
      Per Diem: yes
      Overtime: possible
      Duration: 12+ month
      Start Date: asap
      Input Date: 09/19/2017
      Firm Name: STRUCTURES COMPANY LLC
      Attention: Mark Sharp
      Address: P O BOX 2278
      City, State: SEAL BEACH, CA 90740
      Phone: 714/823-3000
      Website: www.thestructurescompany.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Contract Senior / Design Engineer

      Description:
      RESPONSIBILITIES
      Creates basic designs of aircraft interiors, structures and mechanical systems for Fit, Form and Function to meet customer criteria, quality standards, FAA requirements, budget and project schedules using Computer Aided Drafting/Design tools.
      • Designs and checks aircraft interior furnishing and/or structures.
      • Ensures designs meet customer criteria, quality standards and FAA requirements.
      • Adheres to budget and project schedules.
      • Provides design guidance and feedback to other engineering personnel.

      TARGET QUALIFICATIONS
      • Bachelor's degree (B.S.) in engineering, minimum of 5 years relevant experience, or equivalent combination of education and experience. Aviation background and aircraft interior experience preferred.
      • Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

      IN-DEPTH KNOWLEDGE, SKILLS, AND ABILITIES
      • Ability to design and check interior engineering drawings for Fit, Form and Function.
      • Strong Computer Aided Drafting/Design skills using AutoCAD and/or Inventor.
      • Three dimensional (3D) design/drafting skills are preferred.
      • Knowledge of industry design and documentation standards.
      • Experience with mechanical assemblies and manufacturing technique design.
      • Ability to work independently and cross-functionally as part of an established and growing team.
       
      Job Number: 17-712
      Job Location: Northwest
      Rate: Open
      Per Diem: Split
      Overtime: Possible
      Duration: 6 mths +
      Start Date: ASAP
      Input Date: 10/17/2017
      Firm Name: AGENTE TECHNICAL
      Attention: Alexa Bui
      Address: 714 CENTERPARK DR STE 140
      City, State: COLLEYVILLE, TX 76034-2852
      Phone: 972/415-4545
      800 Phone: 866/758-2494
      Fax Phone: 866/717-5927
      Website: www.agentetech.com

      Customer Service Call Center Representative

      Description:
      PDS Tech, Inc. is seeking a 2nd shift  Customer Service Call Center Representative for an open position in Farmington, CT
      • 24/7/365 Call Center Customer Service Representative - 1st shift Spanish bilingual (CSR) duties are to receive, document, and process telephone calls from customers, mechanics, ADA phones, elevators with REM and Otis local offices using an ACD phone system and mainframe data terminal.
      • Also ensuring the timely dispatching of service mechanics and may be required to escalate requests to field management.
      • Customer Service Representatives are required to work on other tasks as necessary such as, loading duty rosters, ADA phones programming and ACE (quality management system).

      • Must demonstrate strong familiarity with computers and basic application familiarity.
      • Excellent customer services skills, including professional phone etiquette and the ability to handle difficult customer and trapped passengers.
      • Excellent communication skills, including speaking, listening and writing as well as attention to detail and the ability to follow standard processes and procedures is a requirement.
      • Ability to attain and maintain department performance metrics (such as number of calls per hour, log-in / out times, quality monitoring).
      • Metrics and acceptable performance standards are established by management which reserves the right to modify them at any time.
      • Must be able to adhere to assigned work schedules, including but not limited to assigned shift, hours and days off.
      • Must be able to work weekends and holidays.
      • Regular attendance including the ability to start assigned shift on-time is mandatory.
      • Must posses the ability to type at least 25 wpm with accuracy.
      • CSR's must be able to work well in a call center and team environment and understand shift work and its requirements including willingness to handle evening shifts, weekends and holidays.
      • Position requires candidate to work flexible schedule.
      • **Must be able to speak Spanish fluently**

       
      Job Number: 1710071259
      Job Location: Farmington, CT
      Per Diem: No
      Duration: 6 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chris O\'Connor
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i5000000237CSAAY&URLSource=cjhunter

      Customer Service Call Center Representative

      Description:
      PDS Tech, Inc. is seeking a 2nd Shift Customer Service Call Center Representative (FrenchSpeaking) for an open position in Farmington, CT
      • 24/7/365 Call Center Customer Service Representative - 2nd shift bilingual (CSR) duties are to receive, document, and process telephone calls from customers, mechanics, ADA phones, elevators with REM and Otis local offices using an ACD phone system and mainframe data terminal.
      • Also ensuring the timely dispatching of service mechanics and may be required to escalate requests to field management.
      • Customer Service Representatives are required to work on other tasks as necessary such as, loading duty rosters, ADA phones programming and ACE (quality management system).

      • Must demonstrate strong familiarity with computers and basic application familiarity.
      • Excellent customer services skills, including professional phone etiquette and the ability to handle difficult customer and trapped passengers.
      • Excellent communication skills, including speaking, listening and writing as well as attention to detail and the ability to follow standard processes and procedures is a requirement.
      • Ability to attain and maintain department performance metrics (such as number of calls per hour, log-in / out times, quality monitoring).
      • Metrics and acceptable performance standards are established by management which reserves the right to modify them at any time.
      • Must be able to adhere to assigned work schedules, including but not limited to assigned shift, hours and days off.
      • Must be able to work weekends and holidays.
      • Regular attendance including the ability to start assigned shift on-time is mandatory.
      • Must posses the ability to type at least 25 wpm with accuracy.
      • CSR's must be able to work well in a call center and team environment and understand shift work and its requirements including willingness to handle evening shifts, weekends and holidays.
      • Position requires candidate to work flexible schedule.
      • Hours are 3:30pm - 11:30pm and candidate must be able to speak French fluently.  

       
      Job Number: 1710071251
      Job Location: Farmington, CT
      Per Diem: No
      Duration: 6 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chris O\'Connor
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i5000000237BoAAI&URLSource=cjhunter

      DFC Structures Flight Test Engineer

      Description:
      PDS is seeking a EFCS  Engineer for an open position in West Palm Beach, FL


       


      In your role, you will:


      • Test planning function, conduct and report helicopter flight tests in structures and dynamics
        1. Determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
        2. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
        3. Large volumes of gathered flight data are processed and analyzed.
        4. Certification and/or qualification tests are summarized in reports.
         

      Education and Experience:
      - Bachelor's in Aerospace or Mechanical Engineering as a minimum
      - Candidate must have flight test or aerospace design experience
      - Rotary wing experience preferred.
       

       
      Job Number: 1610052203
      Job Location: West Palm Beach, FL
      Per Diem: No
      Duration: 24 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Ryan Bushey
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000001sjdzAAA&URLSource=cjhunter

      Design Checker

      Description:
      All candidates must have a Bachelor’s degree to apply.

      RESPONSIBILITIES
      • Reviews Engineering design documents consisting of drawing, engineering order and parts list for consistency with company standards, design quality, requirements and its corrective interpretation.
      • Also reviews 3D models used to produce 2D design are properly associated and provide repeatability and correct representation in the Digital Aircraft Model.
      • Constant Interaction with Design teams to review/discuss issues and agree on acceptable solutions

      TASKS
      • Check Drawing, Engineering order and parts list for adherence to company standards.
      • Check 3D information in CATIA and PLM System clearly describe and annotate issues found to designer and engineering design field
      • Work with design team to solve issues identified
      • Consult with design team and other checkers for interpretation provide inputs to management on major issues being identified and help develop alternatives for solutions

      REQUIREMENTS
      • 10 plus years of experience designing mechanical and/ or structural parts, assemblies or installations for aircraft
      • 7 years of experience with CATIA and PLM Systems (preferably Teamcenter)
      • 5 years of experience working with GD&T
      • Very familiar with aircraft production and assembly methods
      • BS Mechanical or Aerospace Engineering
      • Experience with Composite materials a Plus
       
      Job Number: 28-016
      Job Location: Greensbo, NC
      Rate: $48-$60 DOE
      Per Diem: Yes
      Overtime: Yes
      Duration: 1 Year plus
      Start Date: ASAP
      Input Date: 12/12/2017
      Firm Name: PRECISION PERSONNEL INC
      Attention: Matt
      Address: 600 CLEVELAND ST STE 700
      City, State: CLEARWATER, FL 33755
      Phone: 727/449-0600
      800 Phone: 877/600-2333
      Fax Phone: 727/449-0627
      Email: matt@precisionpersonnel.com
      Website: www.precisionpersonnel.com

      Design Checker

      Description:
      1. Review 3D engineering data for conformance to requirements as directed.
      2. Check parts for fit, form and function to the extent that information is available.
      3. Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to requirements as directed.

      Checkers are responsible for determining the acceptability of data in the following areas:
      1. Accuracy and completeness of engineering product definition data, including CAD and PDM data.
      2. Proper application and compliance with all Engineering and customer drawing requirements.
      3. Use and understanding of GD & T a must.
      4. Dimensioning and tolerancing including familiarity with ASME Y14.5.
      5. Application of best drafting and design practices and procedures.
      6. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
      7. Advise Design personnel regarding company drawing and design practices and procedures.
      8. Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
      9. Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
      10. Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
      11. Knowledge of company parts list & PdocM, a plus.
      12. Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

      Essential Duties and Responsibilities
      1. Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
      2. Ensures designs meet customer criteria, quality standards and FAA requirements.
      3. Adheres to budget and project schedules.
      4. Provides design guidance and feedback to other engineering personnel.
      5. Other duties as assigned.
      6. Knowledge of industry design and documentation standards.
      7. Experience with mechanical assemblies and manufacturing technique design.
      8. Ability to work independently and cross-functionally.
      9. Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills.
      10. Knowledge of Excel, Share Point software, Microsoft Office a plus

      Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
       
      Job Number: 24-191
      Job Location: Savannah, GA
      Rate: $50.00 - $55.00
      Per Diem: Yes
      Overtime: Yes
      Duration: 1 Year plus
      Start Date: ASAP
      Input Date: 12/12/2017
      Firm Name: PRECISION PERSONNEL INC
      Attention: Matt
      Address: 600 CLEVELAND ST STE 700
      City, State: CLEARWATER, FL 33755
      Phone: 727/449-0600
      800 Phone: 877/600-2333
      Fax Phone: 727/449-0627
      Email: matt@precisionpersonnel.com
      Website: www.precisionpersonnel.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Design Drafter UG/NX required / Solidworks desired NY

      Description:
      4924
      Job title: Design Drafter
      Number of openings: 1
      Position location: East Aurora - NY
      Employment type: Contract
      OT exempt: No


      Shift: 1st
      Education Requirement: Associate’s Degree

      Additional Shift Details:
      Driving on company time?: No
      Minimum Years of Experience: 8 years
      Maximum Hourly Pay Rate: 35-40 max
      Start Date: 09/11/2017
      Tentative End Date: 09/28/2018

      Function:

      Reporting to the Supervisor of Drafting and under technical direction from Engineering the Mechanical Design Drafter, assumes the responsibility for layouts, models, and mechanical hardware drawings in support of development and product design. Tasks include organization and planning of the number and types of drawings, part selection, parts lists generation, developing complex design layouts and related packaging support documentation. The incumbent is responsible for performing Tolerance Analysis in conjunction with utilization of GD&T methodologies to meet both design, manufacturing, and inspection requirements. The incumbent must also have a working knowledge of configuration management control of product design.
      Ideally experience and in-depth knowledge in utilization of NX Mcad design software is required. Additionally experience using 3D Mcad software package ie: Solidworks is a plus. Experiential knowledge of Teamcenter PLM is desirable as well.

      NATURE AND SCOPE OF POSITION:
      The incumbent will work closely with Design Engineering, developing their thoughts and sketches into layouts, drawings, and schematics. He / She should be capable of spatial visualization developing conceptual designs leading to the creation of design layouts for exploring possible design approaches. The incumbent will need the judgment to evaluate and present design alternatives, drawing knowledge from previous designs for incorporation into product and manufacturing ideas. The Design Drafter may have the latitude to make design decisions based on the confidence earned from their respective engineer. The incumbent will need to logically weigh these decisions and possess the judgment to know when to seek technical direction from the responsible Engineer.
      At times it may be necessary for him/her to contact or participate in meetings with other disciplines to discuss design or fabrication requirements and feasibility. This interface includes but is not limited to Design Engineering, Product Engineering, Manufacturing Engineering, Shop and Lab, and possibly outside vendors. As part of this process, the Design Drafter may be involved as a member of concurrent product development teams. He/She must be aware of design to cost, manufacturability, and feasibility of assembly.

      The duties consist of participating in the graphical evolution of new products from layout to drawings including correctness of proportion, arrangement of internal components, necessary dimensional information and material and/or process suggestions. The incumbent produces final drawings developed and dependent on 3D/Solid models working independently or in conjunction with others. The design drafting process requires the incumbent to utilize the Moog’s (MCAD) System(s) (NX Preferably, Solidworks, ) to produce a variety of drawings and layouts to enable better visualization, clearance checks, and also provide manufacturing information for Computer Aided Manufacturing (CAM) operations. Competent capability of the use of Moog’s MCAD and PLM Systems is essential.


      Education: Associates degree in a Technical Field

      Other Requirements

      Perfect candidate will have fluids, actuator, space and defense experience.

      Request status: Open
       
      Job Number: MB-4924
      Job Location: East Aurora, NY
      Rate: 35-40/hr max
      Duration: 12 month contract
      Input Date: 10/03/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Jeana Edrozo
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Website: www.midcom.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Design Engineer

      Description:
      Position requires expertise and experience in design of rotating equipment including bearing analysis (A.B.Jones), spur and bevel gear design and analysis (AGMA), aluminum castings and lubrication and cooling systems. Minimum of 2000 hours experience with Pro/E\Creo (Pro/E\Creo preferred) or CATIA is necessary. Working knowledge of Geometric Dimensioning and Tolerancing is a requirement. Experience in mechanical system integration and development. Analytical knowledge of Reliability, FEA, Nastran and Six Sigma are desirable. Familiarity with formal Qualification Standards such as DO160, MIL-STD-810 or EUROCAE ED-14 is desirable. Job function requires timely preparation of all associated engineering documentation including but not limited to Project Plans, Test Plans and Engineering Changes.

      Benefits:
      Relocatopm Bonus
      Immediate Health Benefits
      401k
      Tuition Reimbursement
      Stock Purchase
       
      Job Location: Park City, UT
      Input Date: 10/25/2017
      Firm Name: APA SERVICES
      Attention: Kami Muehlberger
      Address: 4150 INTERNATIONAL PLZ STE 510
      City, State: FORT WORTH, TX 76109
      800 Phone: 888/272-7868
      Fax Phone: 800/285-8805
      Website: www.apaservices.net

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Design Engineer

      Description:
      Must have a secret clearance

      Experience with all aspects of mechanical design, including layout, documentation and checking (per IAW ASME Y14.24) and be familiar with MIL-T-3100 and MIL-STD-100. Five to ten years experience of creating Pro-E / CATIA drawing and drawing release. Proficiency with Pro-E / Windchill is required.
       
      Job Number: 40587
      Job Location: FL
      Rate: Open
      Per Diem: Split
      Overtime: Possible
      Duration: 12 mos +
      Start Date: ASAP
      Input Date: 08/30/2017
      Firm Name: PANTHER GROUP
      Attention: Marques
      Address: 5 MILL AND MAIN PL STE 430
      City, State: MAYNARD, MA 01754
      Phone: 781/790-7900
      800 Phone: 800/776-0562
      Fax Phone: 781/672-2570
      Website: www.thepanthergrp.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Design Engineer

      Description:
      Design Engineer
      East Aurora, NY
      12+ month contract

      This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components and systems. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.


      NATURE AND SCOPE:

      The Design Engineer typically reports to an Engineering Manager, Section Head or Group Leader within the department and on demanding projects he/she might work under the leadership of a Senior Design Engineer. The incumbent receives instructions on specific assignment objectives, complex features, and possible solutions. He/She is expected to make independent and unreviewed decisions on routine technical matters.

      The Design Engineer is a key contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. The Design Engineer generally will operate as part of a design/development team, which includes other Department engineers with his/her primary concern being component design.

      Successful mechanical designs require judicious material selection, effective use of stress analysis, and sometimes design of unique kinematic mechanisms. Successful electrical designs require intelligent component selection and effective use of thermal stress analysis. Circuit designs must be reliable and make optimal use of available space.

      Required:

      MS Degree preferred in Mechanical, Aeronautical, or Electrical Engineering plus 3 years of design experience

      Alternatively, BS Degree plus 6 years of design experience

      Self-starting instincts

      Strong analytical skills

      3D spatial orientation

      Mechanical hardware design.

      Circuit design and a wide range of electrical components.

      Basic knowledge of closed loop control systems

      Good communication skills
       
      Job Number: 52252
      Job Location: East Aurora, NY
      Rate: DOE
      Per Diem: Possible
      Overtime: Possible
      Duration: 12 months
      Start Date: 9/5/17
      Input Date: 09/21/2017
      Firm Name: BUTLER AEROSPACE & DEFENSE
      Attention: Laura Leszek
      Address: SHELTON POINTE STE 204
      2 TRAP FALLS ROAD

      City, State: SHELTON, CT 06484
      Phone: 203/926-2705
      Fax Phone: 203/926-0082
      Website: www.butler.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Design Engineer - Electrical

      Description:
      ESSENTIAL DUTIES AND RESPONSIBILITIES:
      • Research aircraft systems and components as necessary to perform assignments.
      • Design and develop engineering solutions in support of innovative concepts, and the replication and modification of existing electrical and electromechanical designs.
      • Develop, analyze, and substantiate low to high complex repair solutions for mitigating all kinds of electrical issues.
      • Provide design and repair engineering assistance in support of mechanical and composite projects when assigned.
      • Create technical documents for certification, maintenance and operation of various types of projects.
      • Produce structural, technical and sometimes market analysis for which FAA approval can be obtained to ensure compliance with all appropriate regulatory, customer, OEM, production and management requirements.
      • Create various types of engineering drawings using common CAD software such as AutoCAD and SolidWorks.
      • Perform mechanical and electrical assembly when assigned.
      • Ensure all applicable customer, OEM, FAA, and maintenance requirements are met.
      • Approve engineering documents within authorized signatory level.
      • Train and assist other engineers in performance of their assigned tasks.
      • Participate in the development of work statements and hour estimates in support of project proposals.
      • Represent company on engineering technical matters with OEM’s, customers, operators and regulatory authorities.
      • Interact in a professional manner with members of internal and external organizations.
      • Independently evaluate, select, and adapt to situations. Modify techniques, procedures and criteria to solve problems encountered.
      • Monitor and approve engineering use of Customer, OEM, and other technical data to ensure compliance with all appropriate regulations and requirements.
      • Ensure projects are accomplished within a reasonable time frame as defined by a Project Lead or Engineering Management.
       
      Job Location: Everett, WA
      Input Date: 09/07/2017
      Firm Name: APA SERVICES
      Attention: Kami M Muehlberger
      Address: 4150 INTERNATIONAL PLZ STE 510
      City, State: FORT WORTH, TX 76109
      800 Phone: 888/272-7868
      Fax Phone: 800/285-8805
      Website: www.apaservices.net

      Design Engineer - Level 2 - KY - C

      Description:
      Chipton-Ross is seeking a Design Engineer - Level 2 for an opening in Lexington, KY.

      RESPONSIBILITIES:
      Designs major components, or major portions of a functional system, or technically advanced protoype, promotional or specific products. Develop or improve products and facilitate manufacturing operations. Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal. Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost. Coordinates with other organizations affected by design development. Makes layouts of assemblies and details parts of devices, mechanisms, structures, and products. Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning. Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers.

      REQUIRED EXPERIENCE:
      CATIA
      Solidworks

      PREFERRED EXPERIENCE:
      CREO
      TeamCenter Engineering

      EDUCATION:
      Accredited High School Diploma/GED

      WORK HOURS:
      5/40, Full-Time

      MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

       
      Job Number: 164858
      Job Location: Lexington, KY
      Rate: $25 to $35.00 DOE
      Duration: 9 Months
      Input Date: 12/11/2017
      Firm Name: CHIPTON ROSS
      Attention: Kevin Suk
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: ksuk@chiptonross.com
      Website: www.chiptonross.com

      Design Engineer - Level 2- Secret

      Description:
      PDS Tech, Inc. is seeking a Mechanical Design Engineer - Level 2  for an open position in Lexington, KY.
      Job Description: 

      • Designs major components, or major portions of a functional system, or technically advanced protoype, promotional or specific products.
      • Develop or improve products and facilitate manufacturing operations.
      • Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal. Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost.
      • Coordinates with other organizations affected by design development.
      • Makes layouts of assemblies and details parts of devices, mechanisms, structures, and products.
      • Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning.
      • Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers.

      Mandatory Skills:
      • CATIA
      • Solidworks 



      Desired Skills:

      • CREO
      • TeamCenter Engineering 


       
       
      Job Number: 1710072470
      Job Location: Lexington, KY
      Per Diem: No
      Duration: 9 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Earl Sawyer
      Address: 2154 N CENTER ST STE 405D
      City, State: NORTH CHARLESTON, SC 29406
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000023AykAAE&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Design Engineer - Mechanical

      Description:
      SKILLS AND KNOWLEDGE:
      • Ability to solve practical problems and deal with variables in an environment where limited standardization exists.
      • Must be adaptable and flexible at all times and apply knowledge and skills to develop creative solutions to a wide variety of unique design, modification, and repair problems encountered.
      • Strong PC skills will include e-mail, word processing, spreadsheet, communications, operating systems, and advanced computer drafting skills.
      • Ability to accomplish basic stress analysis and substantiation for complex repairs or modifications using standard accepted industry practices and other structural design methodologies.
      • Ability to understand regulatory requirements for airworthiness, for the FAA and various foreign authorities (JAA, JAR, CAA, DGAC, CAAC, etc.) and include in engineering documents, drawings and designs.
      • Ability to understand and promote the policies / procedures of company and company Engineering.
      • Ability to understand and apply the policies / procedures of all customer(s).
      • Ability to understand and apply information from Structural Repair Manuals (SRMs), Aircraft Maintenance Manuals (MMs), Illustrated Parts Catalogs (IPCs), Service Bulletins (SBs) and other aircraft reference materials.
      • Ability to interpret and use aircraft manufacturing, assembly, and installation drawings.
      • Assertive communication skills are required.
       
      Job Location: Everett, WA
      Input Date: 10/03/2017
      Firm Name: APA SERVICES
      Attention: Kami M Muehlberger
      Address: 4150 INTERNATIONAL PLZ STE 510
      City, State: FORT WORTH, TX 76109
      800 Phone: 888/272-7868
      Fax Phone: 800/285-8805
      Website: www.apaservices.net

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Design Engineer / development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components NY

      Description:
      Request number: 4916
      Date created: 08/28/2017
      Job title: Design Engineer
      Number of openings: 2

      Position location: East Aurora - NY
      Employment type: Contract
      OT exempt: No

      Shift: 1st
      Education Requirement: MS/MA
      Driving on company time?: No

      Maximum Hourly Pay Rate: 50
      Start Date: 09/05/2017
      Tentative End Date: 08/31/2018

      Job Description
      Function: GENERAL FUNCTION:

      This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components and systems that will become the new products of Moog, Inc. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.

      DIMENSIONS:

      Expected annual production sales from projects: $4M to $10M

      NATURE AND SCOPE:

      A variety of technical functions exist within the Design/Development Engineering Department. Reporting to the division's Chief Engineer typically are Associate Engineers, Development Engineers, Design and Project Engineers, Senior Design and Senior Project Engineers, Senior Staff Engineers, and Principal Engineers, as well as Engineering Managers, Section Heads or Group Leaders. The Design Engineer typically reports to an Engineering Manager, Section Head or Group Leader within the department and on demanding projects he/she might work under the leadership of a Senior Design Engineer. The incumbent receives instructions on specific assignment objectives, complex features, and possible solutions. He/She is expected to make independent and unreviewed decisions on routine technical matters. However, assistance is furnished on unusual problems and work is periodically reviewed for application of sound professional judgment.

      The Design Engineer is a key contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. The products of Moog generally are unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The Design Engineer generally will operate as part of a design/development team, which includes other Department engineers with his/her primary concern being component design. The incumbent must effectively coordinate the work of drafters, technicians, and others who assist in specific assignments.

      In the early stages of a new program, the project team will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations. Under the technical direction of the Engineering Manager, Section Head or the team's lead engineer, the Design Engineer will then guide the evolution of the conceptual design, technical project planning, detail design, and development testing. This requires some travel and the participation in presentations to customers.

      The Design Engineer will apply creative skills to generate designs that fulfill the conflicting requirements of meeting performance goals, robustness over extreme conditions, minimum weight, awkward envelopes, and cost effectiveness. Successful mechanical designs require judicious material selection, effective use of stress analysis, and sometimes design of unique kinematic mechanisms. Successful electrical designs require intelligent component selection and effective use of thermal stress analysis. Circuit designs must be reliable and make optimal use of available space.

      To be considered for the position of Design Engineer, a candidate should have a minimum of an MS Degree, preferably in Mechanical, Aeronautical or Electrical Engineering plus three years of design/development engineering experience. As an alternative, the candidate would have a BS Degree plus six years minimum of design/development engineering experience. To fulfill the demands of design and development of new products the individual must have self starting instincts and strong analytical skills. A Mechanical Design Engineer should have a good sense of three dimensional spatial orientation and seasoned knowledge of mechanical hardware design. An Electrical Design Engineer should have solid knowledge of circuit design and a wide range of electrical components.

      Basic knowledge of closed loop control systems and good communication skills is also necessary.

      ACCOUNTABILITIES:

      1. Contribute to the development of new product requirements through consulting with customers and sales personnel.

      2. Validate conceptual problem solutions by performing trade studies and analyses.

      3. Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.

      4. Operate as a key element in a team of creative, independent individuals.

      5. Represent Moog in a manner consistent with its technical reputation.

      6. Create reliable designs through a comprehensive experimental development test program.

      7. Document designs, analyses, and test results with accurate and concise repo
      Essential job functions: manufacturing and procurement as well as mechanical assembly and testing will be required.

      Request status: Open
       
      Job Number: JE-4916
      Job Location: East Aurora, NY
      Rate: 50/hr max
      Duration: 12 month contract
      Input Date: 09/28/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Jeana Edrozo
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Website: www.midcom.com

      Design Engineers

      Description:
      CATIA V5, aircraft interiors, galleys, lavatories, secondary structures, mechanical

      -Holiday Pay
      -Medical
      -Dental
      -Vision
      -Short-Term Disability
      -Direct Deposit
      -401(k) Immediate Enrollment
      -Annual Bonus
      -Referrals
      -Personal Communications
       
      Input Date: 01/23/2017
      Firm Name: AGENTE TECHNICAL
      Attention: Alexa Bui
      Address: 714 CENTERPARK DR STE 140
      City, State: COLLEYVILLE, TX 76034-2852
      Phone: 972/415-4545, 817/354-5555
      800 Phone: 866/758-2494
      Email: resumes@agentetech.com
      Website: www.agentetech.com

      Design Quality Engineer 2/3-Secret Clearance

      Description:
      PDS Tech is seeking a candidate for the Design Quality Engineer 2/3-Secret Clearance position located in Melbourne, FL.  
      Position Summary / Responsibilities
       
      Develops, modifies, applies and maintains quality evaluation and control systems and protocols for processing materials into partially finished or finished materials product.
      Collaborates with engineering and manufacturing functions to ensure quality standards are in place.
      Devises and implements methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment.
      Designs and analyzes inspection and testing processes, mechanisms and equipment; conducts quality assurance tests; and performs statistical analysis to assess the cost of and determine the responsibility for, products or materials that do not meet required standards and specifications.
      Audits quality systems for deficiency identification and correction.
      Ensures that corrective measures meet acceptable reliability standards and that documentation is compliant with requirements.
      May specialize in the areas of design, incoming material, production control, product evaluation and reliability, inventory control and/or research and development as they apply to product or process quality.
      May be certified in lean and six-sigma quality engineering methodologies.

      (3 Positions) - Design Quality 



      • Design Quality Engineers will complement the current Design Assurance staff to provide more surge capability to stakeholder reviews of PDPs as the design process ramps up. 
      • Level 2: 2 Years with Bachelors in Science; 0 Years with Masters
      • Level 3: 5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.
      • Current DoD Secret Clearance

       
      Job Number: 1710066863
      Job Location: Melbourne, FL
      Duration: 12 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Enrique Perez
      Address: 3201 CHERRY RIDGE DR STE A103
      City, State: SAN ANTONIO, TX 78230-4824
      Phone: 210/524-1496
      800 Phone: 866/570-1503
      Email: cecjsanantonio@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000021kwUAAQ&URLSource=cjhunter

      Designer 4 - MS

      Description:
      Chipton-Ross is seeking a Designer 4 for an opening in Pascagoula, MS

      RESPONSIBILITIES:
      Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or AutoCAD. Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications. Exclude classifications in which incumbents predominantly perform drafting assignments.

      Successful candidate will possess an extensive knowledge in specialized functions and a wide and comprehensive acquaintance with, and understanding of, both general and specific aspects of the job and their practical application to complex problems and situations ordinarily encountered.

      Successful candidate will be able to work with minimal supervision. Work may be done without established procedures. May assist in orienting, training, assigning and checking the work of lower level employees and will often be designated as lead worker.

      Typical duties and tasks are varied and complex. Serves as a resource to others in the resolution of problems and issues. Contacts are frequent with individuals representing outside organizations, and/or individuals of significant importance within the company. Contacts involve planning and preparation of the communications, require skill, tact, persuasion and/or negotiation to accomplish the objectives of the communication.

      Specific duties for Fleet Sustainment Engineering include but are not limited to the development and implementation of Ship Change Documents (SCDs), initiation, development, and review of technical drawings, processing of change paper, supporting technical analyses of mechanical systems, supporting preparation of special studies, and cognizance of specific marine systems and ship alterations.

      REQUIRED EXPERIENCE:
      High School diploma or equivalent and six (6) years of related design experience or associates degree and three (3) years of related design experience.

      EDUCATION:
      HS/ GED


       
      Job Number: 155940
      Job Location: Pascagoula, MS
      Rate: $40 to $46.00 DOE
      Duration: 1 year
      Input Date: 12/11/2017
      Firm Name: CHIPTON ROSS
      Attention: Terry Jones
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: tjones@chiptonross.com
      Website: www.chiptonross.com

      Designer/Drafter 3

      Description:
      PDS Tech, Inc. is seeking a Designer/Drafter for an open position in NSacaramento, CA.
      In your role you will:

      • Completes complex drawings to suit engineering changes and initiates engineering changes.
      • Completes the creation of complex design layout and detail drawings of complex products.
      • Performs compilation of materials and specification sheets.
      • Performs dimensions/specification determination necessary on complex drawings for effective manufacturing.
      • Performs the designs of cost-effective complex products with adherence to applicable industry and customer standards/specifications.
      • Completes complex investigations related to product design and maintenance.
      • Performs review of complex engineering drawings and supporting documents for adherence to drafting standards.
      • Completes planning test programs.
      • Selects material based on application; may coordinate procurement. 


       
      Skills and requirements: 
      • PTC CREO Elements/Pro 5.0 
      • Pro Sheetmetal, Piping, Cabling, Surfacing 
      • Autocad 2010 
      • Experience designing sheet metal parts, structural weldments, Electro-Mechanical packaging, large and small welded and/or bolted assemblies, fiberglass and plastic parts 
      • Experience with corrosion protection (ie. Paint, Powder Coat, anodizing, zinc plating) 
      • Experience creating bill of materials, Engineering change procedure, technical writing skills, and creating work instructions 
      • Experience working in a manufacturing environment, interfacing with factory workers, purchasing, communication with suppliers and customers, and interdepartmental interaction 


      Education and Work Experience

      • Bachelor's degree in related field with 2 years experience 
      • Associate Degree in related field with 3 years experience 
      • High School Diploma with 5 years experience 


       
       
      Job Number: 1610055971
      Job Location: Sacramento, CA
      Per Diem: No
      Duration: 6 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Lea Salmo
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FXkOAAW&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Die Engineering Leads - Auburn Hills, MI

      Description:
      STS AeroStaff Services is hiring Die Engineering Leads for open positions in Auburn Hills, Michigan.

      Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

      Job Duties:

      • Conduct Stamping Simulation, Sheet metal Die Development, Die Compensation, Die Manufacturing, Die trial and Virtual Die Tryout in conjunction with Project Management and Customer Engineering teams
      • Perform binder development and draw simulations to ensure safe panels per customer requirements and standards within program timing constraints
      • Analyze spring back, surface abnormalities and other non-conformance and recommend compensation or other countermeasures
      • Develop trim lines, die faces and break lines per customer standards and product requirements
      • Understand GD&T and tolerance stack ups, make recommendations for to ensure feasible product can be released within program timing constraints
      • Perform scrap shed analysis and enact countermeasures for non-conformance areas
      • Provide feedback to die build source for optimal die processes and die designs
      • Interact with customer Product teams and Project Management to ensure feasibility of all details within timing requirements
      • Support of cost reduction/value engineering initiatives
      • Use of software, including but not limited to Autoform, Dynaform, Omnicad, CATIA V5 R19, UG NX, and LS Dyna 5.7

      Qualifications:

      • B.S. in Materials Science, Mechanical Engineering, Industrial Systems Engineering, or relevant area of study Graduate degree is preferred
      • 2 – 5 years of experience with Autoform, Dynaform, Omnicad, CATIA V5 R19, UG NX, and LS Dyna 5.7
      • Understanding of modeling concepts that correlates with actual die construction
      • Must be able to collaborate and work in a team environment with a high level of interpersonal skills
      • Must be able to create technical reports and have excellent presentation skills
      • Must have a basic understanding of sheet metal forming principals
      • Keep up to date with latest die processes and tooling trends to maintain industry leading skills
      • Extensive understanding of sheet metal forming principals, materials commonly used in today’s applications and be able to recommend material alternatives based on application and product geometry
      • High level of analytical ability where problem solving is a must
      • Excellent written and verbal communication and presentation skills

      Benefits:

      STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

      We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

      Thanks for taking the time, and we look forward to hearing from you soon.
       
      Job Number: 40026
      Job Location: Auburn Hills, MI
      Rate: DOE
      Per Diem: No
      Overtime: Possible
      Duration: Temp
      Start Date: ASAP
      Input Date: 09/07/2017
      Firm Name: STS AEROSTAFF SERVICES
      Attention: STS AeroStaff Services
      Address: 2000 NE JENSEN BEACH BLVD
      City, State: JENSEN BEACH, FL 34957
      800 Phone: 877/707-5767
      Fax Phone: 877/707-5767
      Website: www.stsaviationgroup.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Diesel Technician - Vehicle Product Validation and Testing

      Description:
      Job Title: Diesel Technician - Vehicle Product Validation and Testing
      Location: Portland, OR 97217
      Duration: 1 2 Months
      Job Details
      • This is a great vehicle diesel technician position that gets you involved in validating of new prototype test vehicles for a major truck manufacture located in Portland, Oregon.
      • Diesel Technicians will work in the vehicles validation and testing department of new up and coming vehicles that are not yet released to be sold. The Validation group responsibilities is to install one off or several prototype mechanical or electrical components for testing and product improvements purposes. You’ll also be doing engine diagnostics of electrical and mechanical components and repairing or replace any component failures on engine, transmission, suspensions, exhaust and other areas of the vehicle when products fail.
      • As a validation diesel technician, you’ll be writing up engineering reports of the vehicle component failures in detail for the engineering validation team to review. You’ll work closely with the mechanical and electrical engineers that are responsible for the components. Verify and go over and validate any component failures or improvements with team members.
      • You’ll also keep current fleet maintained and running well by doing normal scheduled maintenance work such as oil and air filter changes, brake replacements, tire rotations and other normal scheduled maintenance during the validation and testing period of the test fleet.

      Education:
      • Diesel Technician Technical School (or) Associates Degree in Diesel Technician

      Requirements:
      • Must have 2+ years of diesel technician experience
      • Must have your own tools
      • Be a quick leaner
      • Have good communication skills
      • Work well with others.
       
      Job Number: 3410
      Job Location: Portland, ORE
      Rate: DOE
      Per Diem: Possible
      Overtime: Possible
      Duration: 12 Months
      Start Date: ASAP
      Input Date: 09/05/2017
      Firm Name: OLSA RESOURCES INC
      Attention: Sarabjit Saxena
      Address: 3836 N BALLAST ST
      City, State: PORTLAND, OR 97217
      Phone: 503/608-7895
      Fax Phone: 503/608-7896
      Website: www.olsaresources.com

      Digital Surface Technician

      Description:
      PDS Tech, Inc. is seeking a candidate for Digital Surface Technician position located in Dallas, Tx.

      Position Summary:

      The primary focus of this position is to rotate into all areas of the digital surfacing department, creating the power of the lenses according to the Doctor specification. 

      Duties​:
      Taping and blocking the lenses, generating, polishing, lens washing, Foco vision, and laser engraving. Supervision ranges from close to general. 
      Surface Blocker: Select proper blocking ring and utilize the blocking machine to accurately secure a block to all lenses.
      20% Surface Polisher: Operate the equipment used to polish all lenses going through the digital surface department.
      20% Letter/Tape: Verify lenses picked and identify orders which need to be engraved on the laser.
      Mark appropriate letter on lenses and sort by material type.
      Operate taping equipment to apply protective tape to the front of the lenses.
      Select appropriate block for lenses and place in tray.
      20% Foco Vision: Utilize Foco to check lenses for power, prism, axis, and thickness.
      15% Lens Washer: Hand wash and dry lenses followed by a brief cosmetic inspection of the lenses.
      Utilize tool to strike against the block on the lenses to remove block from lenses.
      Remove tape from lenses.
      10% Laser: Utilize laser to engrave lenses based on material type and special instructions.
      10% Generator Operator: Operate and troubleshoot the generator machine. 
      5% Other Duties: Remove swarf bag and place in proper area as needed.
      Make adjustments to the lenses to correct issues such as sharp edges by grasping the lens and using a bevel wheel to remove the sharp edge.
      Perform other duties within the digital surfacing department or other areas as assigned.
      Maintain a clean and organized work environment.
      Observe all company policies, rules, and safety practices.

      Physical Demands:
      The tasks of this position generally requires duties to be performed by: Frequently lift and move up to 20 lbs to waist height unaccompanied.
      Occasionally lift and move up to 15 lb above shoulder height unaccompanied and 35 lbs to waist height unaccompanied.
      Regularly stand/walk for the duration of shift.
      Occasionally required to sit, stoop, climb, or balance.
      Coordinated use of hands and fingers to grasp, feel objects, transfer small items from one hand to another, fine manipulation, and bilateral reach with arms.
      Use of close vision, color vision, depth perception and ability to adjust focus.

      Work Environment:
      Fast paced, production environment.
      Regularly work with others.
      The noise level in the laboratory is generally moderate.
      Regularly required to work with or around chemicals.
      Work area may be wet/dirty.
      Regularly works near moving mechanical parts.

      Safety and Ergonomic Requirements:
      Must practice safe work practices at all times and report any unsafe conditions immediately.
      Required to wear the appropriate PPE while in the laboratory, including but not limited to safety eyewear and enclosed shoes.
      Attend and participate in all required safety trainings.
      Follow all Lock Out/Tag Out procedures as required for both authorized and affected users.
      Participate in daily ergonomic stretches and follow all ergonomic requirements of the position.
       
      Qualification Requirements:
      To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
      The requirements listed below are representative of the knowledge, skill, and/or ability required.
      Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
      Education/Experience High School education or equivalent preferred.
      2-5 years previous related experience and/or training helpful.
      Language Ability Ability to read and comprehend simple instructions, short correspondence, and memos.
      Ability to write short correspondence.
      Ability to communicate effectively in a team environment.
      Math Ability Basic ability to add and subtract.
      Understand decimal numerical sequencing.
      Ability to multi-task and prioritize.
      Demonstrate good judgement and decision making skills.
      Computer Skills Basic computer skills.
      Certificates and Licenses None required.
       
      Job Number: 1710068320
      Job Location: Dallas, TX
      Duration: 12 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Shannon White
      Address: P O BOX 619820
      City, State: DALLAS, TX 75261-9820
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9636
      Email: cecjnrt@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000012bj3AAA&URLSource=cjhunter

      Digital Surface Technician

      Description:
      PDS Tech, Inc. is seeking a candidate for Digital Surface Technician position located in Dallas, Tx.

      Position Summary: 

      The primary focus of this position is to rotate into all areas of the digital surfacing department, creating the power of the lenses according to the Doctor specification. 

      Duties​:
      Taping and blocking the lenses, generating, polishing, lens washing, Foco vision, and laser engraving. Supervision ranges from close to general. 
      Surface Blocker: Select proper blocking ring and utilize the blocking machine to accurately secure a block to all lenses.
      20% Surface Polisher: Operate the equipment used to polish all lenses going through the digital surface department.
      20% Letter/Tape: Verify lenses picked and identify orders which need to be engraved on the laser.
      Mark appropriate letter on lenses and sort by material type.
      Operate taping equipment to apply protective tape to the front of the lenses.
      Select appropriate block for lenses and place in tray.
      20% Foco Vision: Utilize Foco to check lenses for power, prism, axis, and thickness.
      15% Lens Washer: Hand wash and dry lenses followed by a brief cosmetic inspection of the lenses.
      Utilize tool to strike against the block on the lenses to remove block from lenses.
      Remove tape from lenses.
      10% Laser: Utilize laser to engrave lenses based on material type and special instructions.
      10% Generator Operator: Operate and troubleshoot the generator machine. 
      5% Other Duties: Remove swarf bag and place in proper area as needed.
      Make adjustments to the lenses to correct issues such as sharp edges by grasping the lens and using a bevel wheel to remove the sharp edge.
      Perform other duties within the digital surfacing department or other areas as assigned.
      Maintain a clean and organized work environment.
      Observe all company policies, rules, and safety practices.

      Physical Demands:
      The tasks of this position generally requires duties to be performed by: Frequently lift and move up to 20 lbs to waist height unaccompanied.
      Occasionally lift and move up to 15 lb above shoulder height unaccompanied and 35 lbs to waist height unaccompanied.
      Regularly stand/walk for the duration of shift.
      Occasionally required to sit, stoop, climb, or balance.
      Coordinated use of hands and fingers to grasp, feel objects, transfer small items from one hand to another, fine manipulation, and bilateral reach with arms.
      Use of close vision, color vision, depth perception and ability to adjust focus.

      Work Environment:
      Fast paced, production environment.
      Regularly work with others.
      The noise level in the laboratory is generally moderate.
      Regularly required to work with or around chemicals.
      Work area may be wet/dirty.
      Regularly works near moving mechanical parts.

      Safety and Ergonomic Requirements:
      Must practice safe work practices at all times and report any unsafe conditions immediately.
      Required to wear the appropriate PPE while in the laboratory, including but not limited to safety eyewear and enclosed shoes.
      Attend and participate in all required safety trainings.
      Follow all Lock Out/Tag Out procedures as required for both authorized and affected users.
      Participate in daily ergonomic stretches and follow all ergonomic requirements of the position.
      Qualification Requirements:
      To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
      The requirements listed below are representative of the knowledge, skill, and/or ability required.
      Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
      Education/Experience High School education or equivalent preferred.
      2-5 years previous related experience and/or training helpful.
      Language Ability Ability to read and comprehend simple instructions, short correspondence, and memos.
      Ability to write short correspondence.
      Ability to communicate effectively in a team environment.
      Math Ability Basic ability to add and subtract.
      Understand decimal numerical sequencing.
      Ability to multi-task and prioritize.
      Demonstrate good judgement and decision making skills.
      Computer Skills Basic computer skills.
      Certificates and Licenses None required.
       
      Job Number: 1710068322
      Job Location: Dallas, TX
      Duration: 12 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Sheila Hernandez
      Address: 3201 CHERRY RIDGE DR STE A103
      City, State: SAN ANTONIO, TX 78230-4824
      Phone: 210/524-1496
      800 Phone: 866/570-1503
      Email: cecjsanantonio@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000012bjSAAQ&URLSource=cjhunter

      Digital Surface Technician- 3rd Shift

      Description:
      PDS Tech, Inc. is seeking a candidate for Digital Surface Technician position located in Dallas, Tx.

      Position Summary:

      The primary focus of this position is to rotate into all areas of the digital surfacing department, creating the power of the lenses according to the Doctor specification. 

      Duties​:
      Taping and blocking the lenses, generating, polishing, lens washing, Foco vision, and laser engraving. Supervision ranges from close to general. 
      Surface Blocker: Select proper blocking ring and utilize the blocking machine to accurately secure a block to all lenses.
      20% Surface Polisher: Operate the equipment used to polish all lenses going through the digital surface department.
      20% Letter/Tape: Verify lenses picked and identify orders which need to be engraved on the laser.
      Mark appropriate letter on lenses and sort by material type.
      Operate taping equipment to apply protective tape to the front of the lenses.
      Select appropriate block for lenses and place in tray.
      20% Foco Vision: Utilize Foco to check lenses for power, prism, axis, and thickness.
      15% Lens Washer: Hand wash and dry lenses followed by a brief cosmetic inspection of the lenses.
      Utilize tool to strike against the block on the lenses to remove block from lenses.
      Remove tape from lenses.
      10% Laser: Utilize laser to engrave lenses based on material type and special instructions.
      10% Generator Operator: Operate and troubleshoot the generator machine. 
      5% Other Duties: Remove swarf bag and place in proper area as needed.
      Make adjustments to the lenses to correct issues such as sharp edges by grasping the lens and using a bevel wheel to remove the sharp edge.
      Perform other duties within the digital surfacing department or other areas as assigned.
      Maintain a clean and organized work environment.
      Observe all company policies, rules, and safety practices.

      Physical Demands:
      The tasks of this position generally requires duties to be performed by: Frequently lift and move up to 20 lbs to waist height unaccompanied.
      Occasionally lift and move up to 15 lb above shoulder height unaccompanied and 35 lbs to waist height unaccompanied.
      Regularly stand/walk for the duration of shift.
      Occasionally required to sit, stoop, climb, or balance.
      Coordinated use of hands and fingers to grasp, feel objects, transfer small items from one hand to another, fine manipulation, and bilateral reach with arms.
      Use of close vision, color vision, depth perception and ability to adjust focus.

      Work Environment:
      Fast paced, production environment.
      Regularly work with others.
      The noise level in the laboratory is generally moderate.
      Regularly required to work with or around chemicals.
      Work area may be wet/dirty.
      Regularly works near moving mechanical parts.

      Safety and Ergonomic Requirements:
      Must practice safe work practices at all times and report any unsafe conditions immediately.
      Required to wear the appropriate PPE while in the laboratory, including but not limited to safety eyewear and enclosed shoes.
      Attend and participate in all required safety trainings.
      Follow all Lock Out/Tag Out procedures as required for both authorized and affected users.
      Participate in daily ergonomic stretches and follow all ergonomic requirements of the position.
       
      Qualification Requirements:
      To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
      The requirements listed below are representative of the knowledge, skill, and/or ability required.
      Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
      Education/Experience High School education or equivalent preferred.
      2-5 years previous related experience and/or training helpful.
      Language Ability Ability to read and comprehend simple instructions, short correspondence, and memos.
      Ability to write short correspondence.
      Ability to communicate effectively in a team environment.
      Math Ability Basic ability to add and subtract.
      Understand decimal numerical sequencing.
      Ability to multi-task and prioritize.
      Demonstrate good judgement and decision making skills.
      Computer Skills Basic computer skills.
      Certificates and Licenses None required.
       
      Job Number: 1710068321
      Job Location: Dallas, TX
      Duration: 7 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Sheila Hernandez
      Address: 3201 CHERRY RIDGE DR STE A103
      City, State: SAN ANTONIO, TX 78230-4824
      Phone: 210/524-1496
      800 Phone: 866/570-1503
      Email: cecjsanantonio@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000012bjNAAQ&URLSource=cjhunter

      Director, Training & Flight Operations

      Description:
      Legacy Engineering, a division of PDS Tech, is seeking candidates for Director, Training & Flight Operations, Customer Support Division for the Regional Jet Development Program. 
      This position is located in Nagoya, Japan.  

      In this role, you will be responsible for the development and delivery of Regional Jet Customer training, flight manuals and flight operations engineering support. 



      • Training services include the development of courseware, training devices, training manuals and delivery of initial and recurrent training for Pilots, Technical/Mechanics, Cabin Crews, Ground Servicing Crews, and Dispatchers within an airline. In addition, this person must manage the relationship and performance of CAE, the Company's selected training service provider. 
      • Development, verification/validation and certification of flight operations manuals
      • Flight Operations Engineering support to Company's customers


      Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team and team structure, implementing governance and communication processes, and evaluating the performance of the group.


      Work Location
      The Primary Work Location will be Nagoya, Japan.  Travel to USA or other country will be required.

      Scope of Work
      Specific Training responsibilities include:

      • Overall management of the relationship with and performance of CAE, Company’s training services provider, ensuring training devices and services are high quality at market prices
      • Development and maintenance of training curriculum and courseware for pilots, technicians/mechanics, flight attendants, and flight planning engineers, and ground handling services
      • Development and maintenance of training documentation for each course offered
      • Ensure there are sufficient qualified training instructors located at training delivery sites for the life of the aircraft
      • Ensure training devices (e.g., Full Flight Simulators (FFS), Integrated Procedures Trainers (IPT), Virtual Maintenance Trainers (VMT), Computer Based Training (CBT), Door Trainer and Cabin Trainers) & training facilities meet training objectives and are certified (where applicable) by regulators
      • Obtain regulator certifications such as OSD, FSB, etc.
      • Commitment of training services (both proforma and for fee) to customers as part of the airplane sales process
      • Scheduling customer training at a location that minimizes customer travel costs, meets customer requirements for timing (schedule), and fits within the Company's Training Program strategy.

       
      Specific Flight Operations Support responsibilities include:

      • Define the process interfaces with Flight Test organization, Pilot organization and Flight operation engineering organization. 
      • Development, verification/validation, maintenance and delivery of all technical and administrative documents in support of customer’s flight operations.
        • Airplane Flight Manual (AFM)
        • Flight Crew Operating Manual (FCOM)
        • Quick Reference Handbook (QRH)
        • Weight & Balance Manual (WBM)
        • Master Minimum Equipment List (MMEL)
        • Dispatch Deviation Guide (DDG)
        • Flight Crew Training Manual (FCTM)
        • Cabin Crew Operating Manual (CCOM)
        • Aircraft Characteristics for Airport Planning (AC)



      • Ensure documents meet industry standards for content and format by participating in and influencing industry standards board that define flight operations documentation requirements
      • Create airplane performance databases and may provide specialized training courses to customers to assist them in their understanding and use of the airplane and documents listed above.  Such courses may include:
        • Performance Engineers course
        • Weight & Balance course

      • Review and approve requests from airlines for non-normal operations such as flight with missing secondary structure
      • Respond to Flight Operations related Customer Service Requests.  Utilize the Safety Process for emergent Flight Operations related Safety issues.
      • Prepare and Release Flight Operations Bulletins.  MITAC must define both a Routine bulletin type as well as an Alert bulletin type to correspond to the Maintenance related Service Bulletins
      • Define a change process that addresses Flight Operations related changes that may impact the certification basis of the airplane (e.g. Airplane Flight Manual)

      Expected Education/Experience and Skills:



      1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
      2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in managerial positions providing Training and/or Flight Operations management functions to commercial airline customers.
      3. Commercial pilots license preferred.
      4. Candidates must have skills and experience managing Partners and Suppliers.

       
      Job Number: 1710068573
      Job Location: Nagoya,
      Duration: 36 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chad Dunavant
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JqSMAA0&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Drafter 4 / Catia V5 V6 Teamcenter CA

      Description:
      160178/1609
      Drafter 4 (Job Number: 17018411)

      Number of Openings: 2

      Location(s): United States-California-San Diego


      Shift: 1st Shift

      Target Start Date: Oct 2, 2017

      Title: Drafter 4

      Rate: $30 - $40/hour

      Location: San Diego, CA

      Positions: 2 Total

      Duration: 6 Months

      Shift: 1st Shift - 9/80

      Position Summary / Responsibilities
      Plans, lays outs, draws, and revises detailed part, assembly, and installation engineering drawings from basic layouts, established references, and standard data in a field of specialization such as structures, devices, mechanics, electrical, or electronics. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA. Completes details of major layout drawings prepared by others in accordance with standard engineering drafting practices. Determines scaling; inserts necessary reference planes, centering and dimension lines, hidden line interpolations, and sectioning; prepares specifications for parts, assemblies, and installations; prepares complete production detail drawings; contributes design modifications to improve quality of product or facilitate manufacturing operations.


      Basic Qualifications:

      •Experience with Drawing Releases
      •Experience with Product Lifecycle Management
      •TeamCenter
      •AA or other 2 year technical degree in related discipline and 6 years related experience.

      Preferred Qualifications:

      •CATIA V5/6
      •Experience with NG Products (Triton)
      •Experience with Commercial Electronics
      •19 in. standard rack mounting and computer specification experience
       
      Job Number: MB-17018411
      Job Location: San Diego, CA
      Rate: 30-40 DOE
      Duration: 6 month contract
      Input Date: 09/28/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Jeana Edrozo
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Website: www.midcom.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Drafter – CAD/Manufacturing Engineering

      Description:
      Seeking a Drafter – CAD/Manufacturing Engineering for an opening in Anaheim, CA.

      RESPONSIBILITIES:
      1. Create 2D Autodesk Inventor views for assembly using the 3D Autodesk Inventor model.
      2. Draft 2D Drawings in Inventor and apply GD&T.
      3. Develop assembly instructions in Excel and Paint using the 2D Inventor views.
      4. Generate Engineering drawings, schematics, wire lists and Bill of Materials of electro-mechanical assemblies.
      5. Generate Engineering Change Requests (ECR) in Agile system.
      6. Create routers and Kit by Operation in Make-To-Order system (MTO).
      -To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

      REQUIRED EXPERIENCE:
      1. Knowledge of Mil-Specifications.
      2. Familiar with military and commercial standards pertaining to hardware, material and processes.
      3. Capable of handling multiple projects simultaneously.
      4. Knowledge of machine shop practices.
      5. Practical Drafting experience required.

      -Must have one-year experience in AutoCAD and Autodesk Inventor.
      -Must have one-year experience in 2D drafting using GD&T.
      -Must have one-year experience in using Excel and Paint.

      MATHEMATICAL SKILLS
      Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

      WORK ENVIRONMENT
      The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

      The noise level in the work environment is usually moderate.

      EDUCATION:
      Accredited High School Diploma/GED

      WORK HOURS:
      9/80, Full-Time
       
      Job Number: 165116
      Job Location: Anaheim, CA
      Rate: $33.00
      Duration: 6 Months
      Start Date: ASAP
      Input Date: 09/06/2017
      Firm Name: CHIPTON ROSS
      Attention: Debbie Aubert
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Website: www.chiptonross.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Drafting Checker (aerospace)

      Description:
      Drafting Checker
      Greensboro, NC: location
      Duration: 9+ months
      contract rate: DOE

      Job Summary
      Design Checker
      Desired Skills
      ROBOTICS;CATIA;Design Checker
      Job Description Rich
       
      General Summary: 
      Review Engineering Design Documentation consisting of Drawing, Engineering Order and Parts List for consistency with company standards, drawing quality and drafting requirements. Also review 3D dataset to ensure correct design representation in the Digital Aircraft model.
       
      Duties and Responsibilities:
      1.     Check Drawing, Engineering Order and Parts List for adherence to company standards;
      2.     Check 3D dataset in CATIA V5 and PLM System.
      3.     Participate to design reviews and provide guidance to design team regarding drafting rules and dimension & tolerance requirements.
      4.     Collaborate with Design and Integrated Product Teams to solve issues identified during the reviews.
      5.     Document and communicate issues found during reviews.
      6.     Consult with design team and other checkers for interpretation or drafting rules.
      7.     Act as a Subject Matter Expert regarding interpretation and application of drafting rules.
      8.     Provide inputs to management on major issues being identified and help develop alternatives for solutions.
       
      Education, Work Experience, Certification and/or Licensure:
      1.     10+ years of experience designing mechanical and / or structural parts, assemblies or installations for aircraft.
      2.     At least 7 years of experience with CATIA and PLM Systems (preferably Teamcenter).
      3.     5 years of experience working with GD&T and 5 years of experience checking Aerospace Drawings.
      4.     Candidate must be detail oriented.
      5.     BS Mechanical or Aerospace Engineering.  Experience can used in lieu of education.
      6.     Experience with composite materials is a plus.
       
      Knowledge, Skills and Abilities:
      1.     Familiarity with aircraft production and assembly methods.
      2.     Ability to address issues identified in a direct but respectful way.
      3.     Ability to consistently apply defined criteria.
      4.     Able to work with people with diverse corporate / design culture background.
      Physical Requirements:
      1.     Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
      2.     Incumbents may be required to sit, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
      3.     Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
      4.     Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
      5.     Read, hear, speak, and see with no restrictions, as required by job duties.
      6.     Comprehend and adhere to management directions and/or safety instructions with no restrictions.
      7.     Effectively communicate in Business English language.
      8.     Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
      9.     Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.  
       
       
      Notes
      401K
      6 paid holidays
      Annual bonus

      The Structures Company LLC is an AA/EOE.
       
      Job Location: Greensboro, NC
      Rate: open
      Per Diem: yes
      Overtime: possible
      Duration: 9_+ months
      Start Date: asap
      Input Date: 09/29/2017
      Firm Name: STRUCTURES COMPANY LLC
      Attention: Mark Sharp
      Address: P O BOX 2278
      City, State: SEAL BEACH, CA 90740
      Phone: 714/823-3000
      Website: www.thestructurescompany.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      ECS Flammability

      Description:
      Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

      The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

      We are looking for an ECS Engineer with a focus on Flammability

      Responsibilities:

      Coordinate system test and certification requirements.
      Author flight test and ground test specifications.
      Support flight test and ground test activities.
      Analyze test data and evaluate system operation.
      Verifying Comportment ventilation and drain from the view point of fire marshal
      Engine and APU Compartment Ventilation/Fire extinguisher from the viewpoint of fire marshal
      Prepare test reports.
      Domestic and occasional international travel is required.
      Requirements:

      Flammable Fluid Test, Report, Document, Design for company and certification
      Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
      Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
      Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint.
      Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
      If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

      Candidates must have legal authorization to work in the United States, Canada or Mexico
       
      Job Location: Seattle, WA
      Per Diem: Possible
      Overtime: Possible
      Start Date: ASAP
      Input Date: 10/06/2017
      Firm Name: VELOCITY CONSULTING SOLUTIONS
      Attention: Miguel Calderon
      Address: 20306 15TH AVE NE STE A
      City, State: SHORELINE, WA 98155
      Phone: 206/812-1061
      Website: www.velocity-cs.com

      Electric System Component Outfitting Interface Engineer

      Description:
      This position is located in Nagoya, Japan.

      Electric system component outfitting interface engineer
      • Mechanical/ structural interface engineering expertise
      • Willing to be a leading engineer rather than just a manager or an advisor

      • 10+ years experience 
      • Bachelors Degree in Engineering
      • International experience desirable. 
      • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

       
      Job Number: 1610044922
      Job Location: Nagoya,
      Duration: 36 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Ryan Bushey
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i5000000037FjAAI&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Design Test Engineer

      Description:
      Electrical Test Engineer: Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

      Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns. Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired.

      Experience should also include five years working on the testing of complex mechanical systems, testing of electrical systems and components such as motor controllers, actuator controls, & system controllers. Capability of working independently and is self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required. T
       
      Job Number: CT38872
      Job Location: Windsor Locks, CT, CT
      Rate: 67.00
      Per Diem: Possible
      Overtime: Possible
      Duration: 1 year
      Input Date: 09/06/2017
      Firm Name: APOLLO PROFESSIONAL SOLUTIONS
      Attention: Bill Carriveau
      Address: 7310 RITCHIE HWY STE 400
      City, State: GLEN BURNIE, MD 21061-3092
      800 Phone: 866/277-3343
      Website: www.apollopros.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Engineer

      Description:
      Must be able to interview in person.

      The EE in this position will be responsible for the design, implementation and testing of electrical/electronic systems for new unmanned vehicles. The ideal candidate will participate in requirements and design reviews, translate requirements into electrical designs. The candidate must work well with customers, contractors, and mechanical engineers to effect implementation of system requirements. The EE reports to the Chief Engineering, Program Manager and Technical Director.
      Required Skills and Responsibilities:
      • Perform studies, trades, and analysis as required to support system requirements and their evolution.
      • Electrical circuit design, experience with modifying existing designs or create new designs
      • Proficient in electrical CAD tools for schematic capture and PCB layout.
      • Knowledge of wire harness design, including selection of connectors, wires and cables.
      • Work with designer to lay the cable runs into the CAD model of the airframe.
      • Document systems design, systems analysis, system interface design, and systems integration.
      • Familiar with embedded board systems design
      • Embedded systems and microcontroller implementation and programming
      • Knowledge of common data bus standards and implementations.
      • Interact with customers regarding new capability implementation and integration into an existing network infrastructure.
      • Interface effectively with users, customers, management, and other engineering personnel
      • Proven teamwork and interpersonal skills with the ability to act in a mentor role and be an advocate for positive change.
      • Possess strong verbal and written communications skills.
      • Ability to create and follow standard processes and clearly document results.
      • Knowledge of aircraft electrical systems.

      Preferred Qualifications:
      • Familiar with the Microchip PIC family embedded systems
      • Altium Schematic and Board Layout
      • UAV/Aircraft Integration and Testing
      • Accustomed to working with SAE or DoD standards for aircraft electrical systems.
      • Knowledge of power generation and conversion systems.
      • Knowledge of airborne communications hardware (standard interfaces and protocols, networking, SATCOM, data links, cellular, etc…

      Typical Education/Experience Level 2/3 - Degree and typical experience in engineering classification: 5-9 Years with Bachelors of Science (engineering degree preferred); 3-5 Years with Masters; 10-13 years of experience may be considered in lieu of degree.
       
      Job Number: D115
      Job Location: Irvine, CA
      Rate: $50 - $55
      Per Diem: No
      Duration: 12 mos
      Input Date: 08/30/2017
      Firm Name: 804 TECHNOLOGY
      Attention: Dwayne Crecelius
      Address: 5381 HIGHWAY N STE 201
      City, State: COTTLEVILLE, MO 63304
      Phone: 636/928-0330
      Fax Phone: 636/530-3693
      Website: www.804technology.com

      Electrical Engineer - Machine and Automation Control Software

      Description:
      While the selected individual may be responsible for performing all aspects of engineering design throughout the project lifecycle, this position will focus mainly on machine control and automation software.  The individual will generally work within a multi-disciplinary project team.
       
      Scope of responsibilities will include:
       
      Develop or modify machine control and automation software for PLC, HMI, Motion Control/Servo, DCS, and VFD technologies.  Development of machine vision and/or product registration applications may be included for candidates with the correct skill set or desire to learn.
      Develop functional descriptions, network riser diagrams, and software testing and validation protocols.
      Adhere to project standards for design and documentation.
      Self execute or direct small teams to complete projects per scope, schedule, and budget expectations.
      Support hardware and/or software designs through lab testing.
      Travel to the customer facility for installation, check-out, and start-up as required. 
      Report status to the discipline lead or project manager in an accurate and concise manner.
      Actively engage in personal and team development/improvement efforts.  
       
      The ideal candidate will possess the following:
       
      A minimum of 5 years of machine control and automation software experience.  Equivalent hardware design experience is desired.
       
      BS or MS in Electrical or Computer Engineering.  Equivalent experience may be considered.
       
      Manufacturing experience and design application knowledge of PLC, HMI, DCS, Servo and VFD hardware, including edit-level software capabilities.  Experience with ControlLogix and Wonderware is preferred.  Experience with Reliance Automax or Siemens is desirable.
       
      Application-based experience and design/configuration knowledge of industrial communication networks including Ethernet, DeviceNet, ControlNet, and SERCOS.
       
      Manufacturing data integration and management, along with SCADA, .NET, SQL, and machine vision application experience.
       
      OEM equipment integration experience and electro-mechanical aptitude.  Pneumatics or instrumentation experience is helpful.
       
      Proven experience maintaining effective and positive relationships with engineering management, project managers, clients, OEMs, and vendors.
       
      Experience in the Pulp/Paper & Tissue, Food & Beverage, or Consumer Products industries.
       
      Other Essential Functions:  
      While travel requirements vary by project and phase of the project, the ability to travel up to 20-30% of the time on average will be required.
       
       
      Job Number: 1710071021
      Job Location: Green Bay, WI
      Duration: 12 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Sue Van Pay
      Address: 110 PACKERLAND DR STE A
      City, State: GREEN BAY, WI 54303
      Phone: 920/499-9943
      800 Phone: 800/333-1389
      Fax Phone: 920/499-9067
      Email: cecjgreenbay@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i5000000236XRAAY&URLSource=cjhunter

      Electrical Engineer II

      Description:
      PDS Tech is seeking an Electrical Engineer II for an open position in Arlington, TX

      In your role, you will:


      The Electrical Engineer 2 is responsible for designing and developing the electrical system components on a variety of flight simulator programs. Design responsibilities include creating system wiring diagrams, circuit breaker panels, interface diagrams, power distribution, and other items using CAD tools. The position will work closely with senior level electrical engineers.
       
      Duties:
      • Provide electrical design and development support on a variety of simulator programs.
      • Coordination of design activities with fellow electrical team members, mechanical engineering counterpart, and systems engineering to ensure that designs meet program requirements.
      • Support peer reviews for electrical designs.
      • Perform and document electrical load analysis.
      • Support development of Interface Control Documents (ICD)s.
      • Ability to work with a variety of I/O systems.
      • Knowledge of both analog and digital component design.
      • Support development of hardware subcontractor specifications.

       
      As our ideal candidate, you will meet the following requirements:

      Qualifications:
      • B/S in Electrical Engineering.
      • 4+ years of electrical engineering technical experience.
      • Experience with CAD software, preference to AutoCAD.
      • Systems integration experience.
      • Knowledge of FIO, Racktangle, & VMIC I/O is a plus.
      • Good computer skills including working knowledge of Microsoft Office.
      • Strong communication skills and good team work.
      Be able to obtain a DOD security clearance.

      Additional requirements: 
      Aerospace experience is required.
       
      At a minimum resumes should reflect experience with the following within the aerospace industry.
       
      •             Design and develop electrical systems on aircraft
      •             Produce wiring diagrams using computer aided design
      •             Experience with electrical load analysis

       
       
      Job Number: 1610060907
      Job Location: Arlington, TX
      Per Diem: No
      Duration: 6 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Rebecca Burrows
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FyJFAA0&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Engineers - Irvine, CA

      Description:
      STS AeroStaff Services is hiring Electrical Engineers for open positions in Irvine, California.

      Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

      Job Summary:

      The EE in this position will be responsible for the design, implementation and testing of electrical/electronic systems for new unmanned vehicles. The ideal candidate will participate in requirements and design reviews, translate requirements into electrical designs. The candidate must work well with customers, contractors, and mechanical engineers to effect implementation of system requirements. The EE reports to the Chief Engineering, Program Manager and Technical Director.

      Job Duties:

      • Perform studies, trades, and analysis as required to support system requirements and their evolution
      • Electrical circuit design, experience with modifying existing designs or create new designs
      • Proficient in electrical CAD tools for schematic capture and PCB layout
      • Knowledge of wire harness design, including selection of connectors, wires and cables
      • Work with designer to lay the cable runs into the CAD model of the airframe
      • Document systems design, systems analysis, system interface design, and systems integration
      • Familiar with embedded board systems design
      • Embedded systems and microcontroller implementation and programming
      • Knowledge of common data bus standards and implementations
      • Interact with customers regarding new capability implementation and integration into an existing network infrastructure
      • Interface effectively with users, customers, management, and other engineering personnel
      • Proven teamwork and interpersonal skills with the ability to act in a mentor role and be an advocate for positive change
      • Possess strong verbal and written communications skills
      • Ability to create and follow standard processes and clearly document results
      • Knowledge of aircraft electrical systems

      Basic Qualifications:

      • 5-9 years’ with Bachelors of Science (engineering degree preferred); 3-5 years’ with Masters; 10-13 years’ of experience may be considered in lieu of degree

      Preferred Qualifications:

      • Familiar with the Microchip PIC family embedded systems
      • Altium Schematic and Board Layout
      • UAV/Aircraft Integration and Testing
      • Accustomed to working with SAE or DoD standards for aircraft electrical systems
      • Knowledge of power generation and conversion systems
      • Knowledge of airborne communications hardware (standard interfaces and protocols, networking, SATCOM, data links, cellular, etc.

      Benefits:

      STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

      We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

      Thanks for taking the time, and we look forward to hearing from you soon.
       
      Job Number: 39974
      Job Location: Irvine, CA
      Rate: DOE
      Per Diem: No
      Overtime: Possible
      Duration: Temp
      Start Date: ASAP
      Input Date: 09/06/2017
      Firm Name: STS AEROSTAFF SERVICES
      Attention: STS AeroStaff Services
      Address: 2000 NE JENSEN BEACH BLVD
      City, State: JENSEN BEACH, FL 34957
      800 Phone: 877/707-5767
      Fax Phone: 877/707-5767
      Website: www.stsaviationgroup.com

      Electrical Fabricator

      Description:
      PDS Tech, Inc.is seeking an ELEC. FLT CNTRL/SIM. LABS for an open position in Stratford, CT
      Responsibilities include:

      • Function: Assist with the buildup and installation of Flight Control, Avionic, and Simulation laboratory test facilities.
      • Job Duties:  Assemble required wiring harnesses, test boxes, and laboratory test equipment.

      Skills/Experience
      • Experience with electrical and electronic fabrication.
      • Must have experience with fabrication of Military style connectors and aircraft wiring harnesses and systems.
      • Experience with all the tooling and dies required to terminate mil-spec wires
      • Experience terminating EMI harness assemblies
      • Experience fabricating wire harnesses
      • Experience fabricating test sets
      • Experience using hand tools, mechanical and electrical
      • Experience with schematics and electrical diagrams
      • Evidence of Lockout Tag Out Authorized training

      Other Requirements:

      • Requires Safety shoes
      • Must be able to support extended shift operations, scheduled weekend work, possible shift changes.

       
      Job Number: 1610054244
      Job Location: Stratford, CT
      Duration: 12 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chris O\'Connor
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CHEnAAO&URLSource=cjhunter

      Electrical PM&P Engineer 4

      Description:
      ** Secret Clearance Required to Start **

      Electrical Parts Materials & Processes (PM&P) Engineer

      The Strategic Missile & Information Systems Parts Materials & Processes (PM&P) team is a Specialty Engineering function which provides expertise in EEE, mechanical, metallic and non-metallic parts, materials and related processes as well as survivability. The PM&P subject matter experts are responsible for working with program designers, IPTs and subcontractors to select parts, materials and processes that meet program designated PM&P requirements along with supporting part testing, failure analysis and mitigation development as well as performing supplier compliance assessments and development of all required plans. Additionally, the subject matter experts will support all Parts, Materials, & Processes Control Board (PMPCB) related functions including reviewing of Non-Standard Part Approval Requests and relevant data, PMPCB working groups and board meetings and interfacing with both the customer and subcontractors in support of the PMPCB.
      - Field of expertise must be electrical engineering, materials science and/or engineering, physics or equivalent. Applicants must have prior knowledge of military and industry parts and materials specifications, bills of materials, obsolescence, and have coordinated activities with suppliers.
      - It is desired that applicants have prior experience working with defense contractors, parts, materials, & processes mission assurance plans. Some working knowledge of ionizing radiation effects and testing is also preferred.

      Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
       
      Job Number: 372767
      Job Location: Huntsville, AL
      Rate: TBD
      Duration: 6 - months
      Start Date: ASAP
      Input Date: 12/16/2017
      Firm Name: CTS INTERNATIONAL
      Address: 11100 NE 8TH ST STE 800
      City, State: BELLEVUE, WA 98004
      Phone: 425/646-2688
      Fax Phone: 425/635-7630
      Email: cjhunter@ctsinternational.com
      Website: www.ctsinternational.com

      Electrical Technician

      Description:
      One year in length
      Maximum Hourly pay rate $18.00
      Tests and troubleshoots electronic products using standard and specialized test equipment. 

      1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
      2. Sets up test equipment and tests electronic products using established test procedures and schematics
      3. Provides technical guidance to assemblers and re-work assemblers 
      4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

      5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
      6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
      7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
      8. Recommends and/or proposes process improvements 
      8. Ensures that all relevant quality information/feedback is provided 
      10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
      11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
      12. Keeps workstation, tools and equipment in a neat and orderly manner 
      13. Understands and complies with all Company, safety rules and regulations

      Requirements/Knowledge: 

      v Education Required:
      o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

      v Experience 
      o 1-3 years of electronics related experience

      v Skill Level Required: 
      o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

      o Should have a high level of electrical and mechanical aptitude and analytical skills
      o Ability to interpret drawing and specifications
      o Basic computer skills
      o Knowledge of manufacturing processes and how to effectively troubleshoot problems
      o Should possess dexterity skills, good hand & eye coordination 
      o Willing and able to take and pass basic electronics test 

      Desired Qualifications:

      v Past experience in a manufacturing environment
      v Past experience in a self-directed teaming environment
      v Lean manufacturing knowledge
      v Understanding of IPC-A-610 standards
       

       
      Job Number: 1710063131
      Job Location: Bohemia, NY
      Duration: 12 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Eric Khassanov
      Address: 2154 N CENTER ST STE 405D
      City, State: NORTH CHARLESTON, SC 29406
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Test Engineer

      Description:
      Role: Electrical Test Engineer

      Location: Windsor Locks CT 06096

      Duration:1 year+
      •Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired.
      •Experience should also include five years working on the testing of complex mechanical systems, testing of electrical systems and components such as motor controllers, actuator controls, & system controllers.
      •Capability of working independently and is self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

      Education Bachelors
       
      Job Number: 52328
      Job Location: Windsor Locks, CT
      Input Date: 09/13/2017
      Firm Name: BUTLER AEROSPACE & DEFENSE
      Attention: Bala
      Address: SHELTON POINTE STE 204
      2 TRAP FALLS ROAD

      City, State: SHELTON, CT 06484
      Phone: 203/926-2705
      Fax Phone: 203/926-0082
      Website: www.butler.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical. FLT CNTRL/SIM. LABS

      Description:
      FUNCTION
      Assist with the buildup and installation of Flight Control, Avionic, and Simulation laboratory test facilities.

      JOB DUTIES
      Assemble required wiring harnesses, test boxes, and laboratory test equipment.

      SKILLS/EXPERIENCE
      - Experience with electrical and electronic fabrication.
      - Must have experience with fabrication of Military style connectors and aircraft wiring harnesses and systems.
      - Experience with all the tooling and dies required to terminate mil-spec wires
      - Experience terminating EMI harness assemblies
      - Experience fabricating wire harnesses
      - Experience fabricating test sets
      - Experience using hand tools, mechanical and electrical
      - Experience with schematics and electrical diagrams
      - Evidence of Lockout Tag Out Authorized training

      OTHER REQUIREMENTS
      - Requires Safety shoes
      - Must be able to support extended shift operations, scheduled weekend work, possible shift changes.
       
      Job Number: 16-604-1396
      Job Location: Northeast
      Rate: OPEN
      Per Diem: Split
      Overtime: Possible
      Duration: 6 mths +
      Start Date: ASAP
      Input Date: 10/17/2017
      Firm Name: AGENTE TECHNICAL
      Attention: Alexa Bui
      Address: 714 CENTERPARK DR STE 140
      City, State: COLLEYVILLE, TX 76034-2852
      Phone: 972/415-4545
      800 Phone: 866/758-2494
      Fax Phone: 866/717-5927
      Website: www.agentetech.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical/Mechanical Engineering Contractor

      Description:
      UNIQUE SKILLS
      Ideal Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to: - 3D wire routing - EWIS - Cabin Management System - Cabin Entertainment System - Cabin Lighting - Cabin Switch Controls - Telephone System - Satellite communications - Water System - Waste System - Cabin interior monuments - Seats Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.

      ESSENTIAL FUNCTIONS
      1. Contributes to planning, developing and coordinating of important engineering projects
      2. Provides specialized technical assistance to team members
      3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
      4. Determines and develops own approach to solutions within schedule and cost objectives
      5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
      6. Acts as liaison with representatives outside of the assigned group/area.

      OTHER REQUIREMENTS
      1. Advanced degree in engineering related field preferred
      2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
       
      Job Number: 17-725-102177
      Job Location: Southeast
      Rate: $58.00 to $63.00/per hour
      Per Diem: Split
      Overtime: Possible
      Duration: 6 mths +
      Start Date: ASAP
      Input Date: 10/17/2017
      Firm Name: AGENTE TECHNICAL
      Attention: Alexa Bui
      Address: 714 CENTERPARK DR STE 140
      City, State: COLLEYVILLE, TX 76034-2852
      Phone: 972/415-4545
      800 Phone: 866/758-2494
      Fax Phone: 866/717-5927
      Website: www.agentetech.com

      Electro Mechanical

      Description:
      PDS Tech, Inc. is seeking an Electro-Mechanical Assembler for an open position in Lincolnton, NC
       

       
      Job Number: 1710072009
      Job Location: Lincolnton, NC
      Duration: 6 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Roger Greco
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i5000000239bcAAA&URLSource=cjhunter

      Electro Mechanical

      Description:
      PDS Tech, Inc. is seeking an Electro-Mechanical Assembler for an open position in Lincolnton, NC.

      SUMMARY:

      Perform hand assembly operations which may include one or more of the following: component identification, soldering, testing and packaging using small tools and equipment in a teamwork environment.  Produce with minimum supervision according to kanban and sales order reports and managing required material.
       
       
      ESSENTIAL DUTIES AND RESPONSIBILITIES:
      • Assemble in compliance with IPC standards
      • Operate test and assembly equipment
      • Operating small tools/equipment
      • Navigate within Oracle's manufacturing reports
      • Component identification
      • 5S and housekeeping
      • Ensure all safety standards are adhered to
      • Find, report and correct EH&S discrepancies on a routine basis
      • Recommend improvements to material, process flow and information flow
      • Material/inventory management - ensure kanban levels are sufficient to maintain production requirements
      • Train new associates in standard manufacturing practices
      • Overtime will be required as the needs of the business dictate
      • Understand ever changing MFG requirements and the means of achieving those metrics
      • Understand internal and external customer requirements.
      • Promotes and supports company policies, lean culture and teamwork environment

      Other duties may be assigned as required to meet business needs
       
      QUALIFICATIONS:
      The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

      • Strong communications skills
      • Ability to support / lead within a team environment
      • Basic computer skills
      • Familiarity with Microsoft Office
      •  
      •  
      • May be required to properly lift up to 30 pounds maximum.  If an employee needs to lift over 30 pounds, it needs to be done with two employees lifting or needs to be reported to EHS to determine what can be done for a lifting aid.
      • Experienced user of Microsoft Office Applications (Word, Excel, PowerPoint)
      • Good verbal and written communication skills
      • Must be able to read and interpret BOM’s

       
       
      DESIRED CHARACTERISTICS
      The following skills may be required depending on the MFG Assembly Operations work location within the plant.

      • Soldering, desoldering and repair of visual errors

       
       
       
      EDUCATION and/or EXPERIENCE
      High school diploma or general education degree (GED).
      Prefer work experience in electronics or circuit board assembly.
      Experience may be obtained through on-site placement by temporary agency.
      WorkKeys preferred.

       

       
      Job Number: 1710064336
      Job Location: Lincolnton, NC
      Duration: 6 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chris O\'Connor
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GMAjAAO&URLSource=cjhunter

      Electro Mechanical

      Description:
      PDS Tech, Inc. is seeking an Electro-Mechanical Assembler for an open position in Phoenix AZ. Please contact Tiffany Armour 480-351-2945 or tarmour@pdstech.com 
      Job Responsibilities 
      Perform various technician functions associated with testing a variety of aerospace applications. Typical duties/tasks include: 
      - Set up & operate a variety of test equipment 
      - Test a variety of electronic units using prescribed test procedures 
      - Configure and or verify regular test equipment to fit special tests 
      - Interpret and record test results 
      - Utilize a variety of diagnostic tools to troubleshoot to component level 
      - Recognize and isolate test equipment failures with assistance; generate Test Support Engineering ticket 
      - Perform high potential testing 
      - Read and interpret assembly and test instructions, engineering prints, and schematics 
      - Utilize computer systems (e.g. work instructions, labor charging, prints, and standards) 
      - Process material requisitions in accordance with established procedures 
      - Generate Non-Conforming Material (NCM) reject tags, Unplanned Work Request, and troubleshoot log form 
      - Recognize and take steps to resolve test/work area issues 
      - Maintain accurate records of all work performed 
      - Train other employees and perform other duties as assigned. 
       
      Education 
      •  Associates Degree in related technical field, or equivalent completed education required 


      Experience/Qualifications 

      • Minimum of 1 year direct experience in electronic test and troubleshoot.
      • Good reading, writing & math skills; good computer skills; knowledge of office software apps; understand theory of electronic circuitry & electrical components; ability to read and interpret assembly / test instructions, engineering standards, engineering prints, and schematics.
      • Ability to read and follow written and verbal instructions, use diagnostic and hand tools, effectively communicate & interact with others at all levels, understand and operate electronic test equipment, and handle multiple tasks at the same time. 

       
      Job Number: 1710070627
      Job Location: Phoenix, AZ
      Duration: 12 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Tiffany Armour
      Address: 1839 S ALMA SCHOOL RD STE 250
      City, State: MESA, AZ 85210
      Phone: 480/929-9922
      800 Phone: 800/657-0997
      Fax Phone: 480/929-9779
      Email: cecjphoenix@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002353CAAQ&URLSource=cjhunter

      Electro Mechanical Advanced

      Description:
      PDS Tech, Inc. is seeking an Electro-Mechanical Assembler for an open position in Bloomfield, CT.
      • Electro-mechanical assembly and wiring.
      • Must have a firm understating of wiring diagrams and mechanical drawings


       
      Job Number: 1710070862
      Job Location: Bloomfield, CT
      Duration: 6 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Roger Greco
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002366fAAA&URLSource=cjhunter

      Electro-Mechanical Assembler

      Description:

      Job Description
      Perform hand and/ or machine assembly which may include one or more of the following:
      • Operating automated machinery
      • Presses
      • Component identification
      • Soldering
      • Testing and Packaging using small tools and equipment in a teamwork environment
         

      Essential Duties and Responsibilities include the following. Other duties may be assigned.

      • Assemble in compliance with IPC standards including basic soldering (through hole, point to point) .
      • Internal / external customer satisfaction .
      • Operate test equipment and analyze test data .
      • Component identification .
      • Operating small tools/equipment .
      • Verify correct documentation (process sheets, drawings, etc.) .
      • 5S
      • Safety and housekeeping.
      • Overtime as required .
      • Training as required for the position and
      • Assist with the training of new associates in standard manufacturing practices.

       
      Qualifications
      The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

      • Strong communications skills .
      • Reading comprehension .
      • Basic math and computer skills .
      • Manual dexterity .
      • Ability to support / lead within a team environment .
      • May be required to properly lift up to 35 pounds maximum.
      • If an employee needs to lift over 35 pounds, it needs to be done with two employees lifting or needs to be reported to EHS to determine what can be done for a lifting aid.

       
      Desired Characteristics The following skills may be required depending on the MFG Assembly Operations work location within the plant.
       
      • Soldering
      • Desoldering and
      • Repair of visual errors

       
      Education and/or Experience

      • High School Diploma or
      • General Education Degree (GED).

       
       
      First and Second Shifts available
       

       
      Job Number: 1710067030
      Job Location: Lincolnton, NC
      Duration: 6 months
      Input Date: 12/15/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chris O\'Connor
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000021mFuAAI&URLSource=cjhunter

      Electro-Mechanical Assembler

      Description:
      PDS Tech is seeking Assemblers for open positions in Redmond, WA.
      • Assembles fabricated parts at floor stations.
      • Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
      • Uses hand tools and power tools to assemble units according to product specifications. Specific tools used will be tweezers, vacuum wands and torque drivers.
      • Identifies units that fail tests or tolerance levels and repairs as necessary.
      • Position may involve microscope work and require the use of a Clean Room gown and hood.


       
      • Must have computer skills and be familiar with how to use a computer
      • Requires a verifiable high school diploma or its equivalent.
      • Experience working with microscope; working with microscopic components
      • Soldering skills/experience required
      • Must be able to use tweezers, vacuum wands and torque drivers.
      • US citizenship is required.


      This is an opportunity for contract to hire based on individual work performance, attendance/dependability and Client's business needs.

       
       
      Job Number: 1710064077
      Job Location: Redmond, WA
      Duration: 8 months
      Input Date: 12/11/2017
      Firm Name: PDS TECHNICAL SERVICES
      Attention: John Blackmore
      Address: 12720 GATEWAY DR S STE 102
      City, State: TUKWILA, WA 98168-3333
      Phone: 206/763