Job Search Results

875 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/09/24 Monday 03:00PM Pacific Time by ContractJobHunter. )

Listings 1 - 875

Go To My Job Tracker

Expand all descriptions

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 12/19/2016
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2239 - CABINET DESIGNER - cv. word doc only

Description:
Act as a specialist in a specific system/monument.

Define technical specifications, mechanical/electrical interfaces, design, integrate, certify, test and troubleshoot the above described systems.

Organize and attend design reviews taking into consideration industry regulations, Client Design Practices and requirements.

Be in direct contact with suppliers and responsible for the delivery of quality engineering documentation that meets Client Standards.

Research, design and evaluate new technical concepts or emerging technologies. (Trade Shows, Air Shows, technical exhibitions, etc).

Procure parts and supply instructions drawings to employees to build mock-ups/prototype.

Provide definition engineering in relation with new designs.

Support the creation of Interface Control Drawings (ICD).

Report status, identify and mitigate roadblocks.

Point of contact on a technical level for designers.

Accountable for engineering deliverables and milestones for a group of monuments.

Bachelor's degree in Mechanical Engineering with 5 to 8 year experience.

Knowledgeable in 3D design with CATIA V5.

Organized and project oriented.

Must be bilingual and have good communication skills including good English and French writing and verbal skills.

Are a team player, working in a multidisciplinary team.

Customer-oriented with innovative problem solving skills and you are organized.

Autonomous, flexible and oriented toward result via your project management skill.

Experience and have lead a small group of designers or equivalent.

Have design experience in cabinet assembly design and/or cabinet installation.
 
Job Number: 2239
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 07/27/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanic

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a mid-size but rapidly growing company in Seattle, WA that was founded in 2001. They have a new flight test facility in Moses Lake WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Primary Role: Performing routine and periodic maintenance throughout all phases of flight testing; maintaining quality and safety standards; keeping records; maintaining equipment and supplies.

Secondary Role: Support flight test engineers and ground operations personnel as necessary by helping to install test instrumentation, wiring, and custom manufactured hardware.


Job Duties and Responsibilities:
Perform daily pre and post flight inspections.
Perform routine servicing of aircraft systems.
Perform aircraft systems checks and calibration as required.
Trouble shoot and repair pre and post flight squawks in a timely manner.
Assist in the installation and removal of essential flight test instrumentation hardware and wiring.
Routine removal of panels to route and access flight test instrumentation wires and hardware.
Maintain safe operations and workspace.
Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.
Knowledge/Skills/Abilities:

Experience in maintenance support related to flight test is desired but not required.
Experience with or willing to learn working in a flight test environment.
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong organizational, time management and prioritization skills:

Education
High School Diploma
Formal training in Aviation Maintenance Technologies or other related field
A & P Certificate or equivalent Certificate
1-5 years minimum experience maintaining commercial and/or regional aircraft
 
Job Location: Moses Lake, WA
Rate: open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: Now
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst

Description:
Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
Duration: 1 year contract
Shift: 1st Shift

**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.

Skills:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
- B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: 7854
Job Location: Savannah, GA
Rate: $60.00 - $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/23/2017
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst with active secret / ANSYS heat transfer CFD aerothermodynamics liquid rocket engine systems turbomachinery combustion devices URGENT FL

Description:
160246/7337135

Job Title: Aero Thermal Fluids Analyst
62.86/hr


Number of Positions: 3
Remaining Positions: 3
Duties: ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage or Sterling / Talentwise. See attachment for specific background check onboarding requirements **


-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.
Skills: -Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education: B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering


Skills: Required
• ANSYS
• ACTIVE SECRET CLEARANCE

State/Province: Florida
City/Town: Jupiter
Address: 17900 Beeline Hwy


Start Date: 09/18/2017 Hours Per Week: 40.00
Est. End Date: 09/18/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7337135
Job Location: Jupiter, FL
Rate: 62.86/hr max
Duration: 12 month contract
Input Date: 02/22/2018
Last Updated: 02/27/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Design Engineers - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring Aerospace Design Engineers for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• To design tooling, fixtures or equipment per customer specifications to meet the intended need
• Develop advanced planning on tooling concepts
• Support manufacturing during build phases and resolve any non-conformances in a timely manner
• Utilize CAD software to perform FEA analysis on designs, write FEA reports and provide design feedback to design engineers
• To support and provide feedback on customer RFQ’s
• Assume other accountabilities and duties as assigned by the Leadership

Qualifications:

• Strong CAD (Catia, NX, etc.) design abilities including 3D modeling and complex assemblies
• Experience with and/or knowledge of Tooling Design and Manufacturing, Controls knowledge a plus
• Experience with and/or knowledge of Automated Production Systems a plus
• Ability to effectively prioritize and execute tasks in a high-pressure environment including following on tools during the fabrication, build installation and commissioning phases of the project
• Ability and willingness to travel to any of the customer and Company’s work locations in North America, Europe and Asia, as required by Management
• Must be willing to work extended hours, when necessary, including overtime, weekends and holidays and on night shift, as project and customer demands dictate
• Excellent interpersonal, written and verbal communication skills
• Ability to work with others, including peers and personnel in other departments
• Eligibility for clearance under the Canadian Controlled Goods and the American ITAR requirements
• At minimum a Bachelor of Science in Mechanical or Aerospace Engineering, Masters of Science in an engineering discipline preferred
• PE license preferred, must show ability to attain license
• Minimum 5 years’ experience performing stress analysis utilizing FEA software (Abaqus, Algor, NASTRAN/PASTRAN, etc.) and performing hand calculations

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39985
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Instrumentation Technician

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.The strategic purpose of the Test and Evaluation Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

Responsibilities:

Reading and creating wire diagrams.
Selecting or auditing appropriate sensors given engineering requirements.
Working with customers and engineers to define appropriate instrumentation requirements.
Designing instrument installations and creating installation instructions.
Instrumentation installation.
Evaluating instrumentation installations for function and safety.
Troubleshooting instrumentation problems.
Data acquisition system operation.
Documenting data system practices and procedures.
Generating instructions and operation manuals.
Developing sensor calibration and functional test procedures.
Maintaining calibration records.
Domestic and international travel may be required.
Desired Qualifications:

3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to work interdependently, and lead small groups.
CATIA V experience beneficial.
Experience with data processing and analysis beneficial.
Computer programming experience beneficial.
Proficient in working with Microsoft Office applications including Word and Excel.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 09/09/2017
Last Updated: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Instrumentation Technicians-Flight Test

Description:
Interested in candidates with aerospace or automotive backgrounds.

Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

Responsibilities:
� Reading and creating wire diagrams.
� Selecting or auditing appropriate sensors given engineering requirements.
� Working with customers and engineers to define appropriate instrumentation requirements.
� Designing instrument installations and creating installation instructions.
� Instrumentation installation.
� Evaluating instrumentation installations for function and safety.
� Troubleshooting instrumentation problems.
� Data acquisition system operation.
� Documenting data system practices and procedures.
� Generating instructions and operation manuals.
� Developing sensor calibration and functional test procedures.
� Maintaining calibration records.
� Domestic and international travel may be required.

Desired Qualifications:

� 3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to work interdependently, and lead small groups.
� CATIA V experience beneficial.
� Experience with data processing and analysis beneficial.
� Computer programming experience beneficial.
� Proficient in working with Microsoft Office applications including Word and Excel.
 
Job Location: Moses Lake, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 2-3 year contract or Direct
Start Date: Now
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interior Design Engineer

Description:
Interior Design Engineer:
Location: Southeast USA
Duration: long term contract

The Interior Design Engineer will perform design engineering for cabin & cockpit structures, components, and trim for aircraft. The individual will also support tasks associated with interior Installations.

Duties and Responsibilities:
1. Creates conceptual designs for interiors of the aircraft through 3D modeling software, drawings, and/or drafting application.
2. Develops designs for form/fit/function to meet customer and design criteria.
3. Provides designs for the fabrication process including sheet metal, extrusions and inject molding
4. Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
5. Makes recommendations to engineering lead/management.
6. Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.
7. Ensures adherence to program schedule.
8. Performs other duties as assigned.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors’ degree in Mechanical, Aerospace or Civil Engineering from a four year college or university is required. (In lieu of degree, management may elect to consider individuals with a equivalent years of combined experience and training.)
2. Masters’ degree in Engineering preferred.
3. 8+ years of engineering experience with at least three years of design engineering experience directly related to mechanical/interior design for commercial aircraft.

Knowledge, Skills and Abilities:
1. Working knowledge of conceptual design development of aircraft interiors.
2. Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
3. In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
4. Familiarity with 14CFR Part 23/25.
5. Proficiency in CATIA V5 workbenches or equivalent 3D modeling tools (i.e. - Solidworks, Unigraphics, etc).
6. Proficiency in Teamcenter (or equivalent PLM tool).
7. Ability to work independently or within a team environment.
8. Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
9. Ability to work cross functionally with Quality and Production to resolve issues on the production line.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Southeast US
Rate: DOE
Per Diem: Yes
Overtime: Possible
Duration: 9+ months
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft System Integration Engineer TSI

Description:
UNIQUE SKILLS
1. CATIA Knowledgeware and SmarTeam experience desirable.
2. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
3. Experienced in engineering review of 3D models and PLM data for integration criteria including, but not limited to, system separation, clash analysis, kinematics and standard part usage is desirable.
4. Experience with mechanical assemblies and manufacturing technique design.
5. Excellent communication skills, written and verbal. Ability to lead daily sign off meetings.
6. Use and understanding of Dimensioning and Tolerancing including familiarity with ASME Y14.5 a must.
7. Use of Microsoft Word, Excel and Power Point for creation of reports.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-751-98281
Job Location: Southeast
Rate: $50.00 to $55.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Assembler - Level 1

Description:
PDS Tech, Inc. is seeking a candidate for Assembler- Level 1 in Redmond, WA.
Various shifts available. 

  • Assembles fabricated parts at floor stations.
  • Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
  • Uses hand tools and power tools to assemble units according to product specifications.
  • Identifies units that fail tests or tolerance levels and repairs as necessary. 
  • Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
  • Relies on instructions and pre-established guidelines to perform the functions of the job.
  • Works under immediate supervision. Primary job functions do not typically require exercising independent judgment.
  • Typically reports to a supervisor or manager.

Special Considerations:
Lifting is generally in the 10 to 15 Lbs. range with minimal repetitions.
Exposure to machinery, chemical, biological, and physical risks is minimal. 
Position will require regular use of a microscope.

Additional qualifications and considerations: 
Experience using and comfortable with a microscope for assembly and inspection of parts. 
Experience working in a class 1000 cleanroom. 
Comfortable working with chemicals and using personal protective equipment. 

 

  • The minimum level of education required for ISC assignments is High School diploma/GED.
  • Suppliers should obtain a copy of the candidates highest level of education (HSD/GED or degree) to avoid delays in onboarding.

 
Job Number: 1710069437
Job Location: Redmond, WA
Duration: 6 months
Input Date: 06/14/2017
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002K46JAAS&URLSource=cjhunter

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 02/27/2017
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

Bleed Air Designer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-024
Job Location: Greensboro, NC
Rate: Up to $60/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/17/2018
Last Updated: 09/24/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Calibration Technician -

Description:
JSG is looking for a Calibration Technician for a 15 Month Contract Opportunity with our client in Coatesville, PA


ASSIGNED DUTIES:

Recall calibrated tooling periodically in accordance with company's master calibration schedule.
Send complex calibrated tooling out to a calibration vendor for periodic inspection/maintenance.
Perform simple calibrations in-house in accordance with Sikorsky and NIST (National Institute of Standards and Technology) procedures.
Maintain certification documentation for each piece of Sikorsky PA’s calibrated tooling.
Follow broad instructions and general methods to work from metrology procedures and standards, tool designs, engineering drawings, etc., to perform inspection and calibration duties.
Set up and operate a variety of precision gages and instruments, and perform complex layouts, to inspect and calibrate tools to metrological standards.
Repair, adjust micrometers, height gages, vernier calipers
Maintain close liaison with other departments to resolve metrology problems.
Troubleshoot/repair testing equipment; have a working knowledge of electricity, circuitry, and mechanical components.
Demonstrate knowledge of the technical standards for establishing calibration set out by the American Society of Testing and Materials.
Skills Required:

Candidate must demonstrate excellent math skills (emphasis on trigonometry and geometry) and be able to analyze numerical data
Candidate must demonstrate computer literacy; with emphasis on Microsoft Access and Excel for data management.
Experience Required:

Minimum High School Diploma or Equivalent Required
Formal education in Calibration Technology; or American Society for Quality (ASQ) Certified Calibration Technician certification Required
Demonstrated aerospace metrology experience or Military calibration experience required
 
Job Number: 358918
Job Location: Coatesville, PA
Rate: $21.50hr
Per Diem: no
Overtime: Yes
Duration: 15 months
Start Date: asap
Input Date: 08/04/2017
Last Updated: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia V5 Design Checker

Description:
1. CATIA Knowledgeware and SmarTeam experience desirable.
2. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
3. Experienced in engineering review of 3D models and PLM data for integration criteria including, but not limited to, system separation, clash analysis, kinematics and standard part usage is desirable.
4. Experience with mechanical assemblies and manufacturing technique design.
5. Excellent communication skills, written and verbal. Ability to lead daily sign off meetings.
6. Use and understanding of Dimensioning and Tolerancing including familiarity with ASME Y14.5 a must.
7. Use of Microsoft Word, Excel and Power Point for creation of reports.
 
Job Number: 24-171
Job Location: Savannah, GA
Rate: $50-$55/hr
Per Diem: YES
Overtime: YES
Duration: 1 yr+
Start Date: ASAP
Input Date: 04/12/2017
Last Updated: 09/01/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
• Design Engineer/Mechanical Engineering for Final Phase Completions.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
• Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.
• Other preferred skills: Excel, Word and Power Point.

Experience/Education Required:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
 
Job Number: 24-236
Job Location: Savannah, GA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 04/02/2018
Last Updated: 05/03/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Design Engineer in East Aurora, NY #4916AS

Description:
Recruiter to Contact: Adam Salazar
Job Title: Design Engineer
Job Number: 4916
Location: East Aurora, NY
Compensation: DOE
Assignment Length: 12 Month
2 openings

GENERAL FUNCTION:

This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components and systems that will become the new products of Moog, Inc. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.

DIMENSIONS:

Expected annual production sales from projects: $4M to $10M

NATURE AND SCOPE:

A variety of technical functions exist within the Design/Development Engineering Department. Reporting to the division's Chief Engineer typically are Associate Engineers, Development Engineers, Design and Project Engineers, Senior Design and Senior Project Engineers, Senior Staff Engineers, and Principal Engineers, as well as Engineering Managers, Section Heads or Group Leaders. The Design Engineer typically reports to an Engineering Manager, Section Head or Group Leader within the department and on demanding projects he/she might work under the leadership of a Senior Design Engineer. The incumbent receives instructions on specific assignment objectives, complex features, and possible solutions. He/She is expected to make independent and unreviewed decisions on routine technical matters. However, assistance is furnished on unusual problems and work is periodically reviewed for application of sound professional judgment.

The Design Engineer is a key contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. The products of Moog generally are unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The Design Engineer generally will operate as part of a design/development team, which includes other Department engineers with his/her primary concern being component design. The incumbent must effectively coordinate the work of drafters, technicians, and others who assist in specific assignments.

In the early stages of a new program, the project team will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations. Under the technical direction of the Engineering Manager, Section Head or the team's lead engineer, the Design Engineer will then guide the evolution of the conceptual design, technical project planning, detail design, and development testing. This requires some travel and the participation in presentations to customers.

The Design Engineer will apply creative skills to generate designs that fulfill the conflicting requirements of meeting performance goals, robustness over extreme conditions, minimum weight, awkward envelopes, and cost effectiveness. Successful mechanical designs require judicious material selection, effective use of stress analysis, and sometimes design of unique kinematic mechanisms. Successful electrical designs require intelligent component selection and effective use of thermal stress analysis. Circuit designs must be reliable and make optimal use of available space.

To be considered for the position of Design Engineer, a candidate should have a minimum of an MS Degree, preferably in Mechanical, Aeronautical or Electrical Engineering plus three years of design/development engineering experience. As an alternative, the candidate would have a BS Degree plus six years minimum of design/development engineering experience. To fulfill the demands of design and development of new products the individual must have self-starting instincts and strong analytical skills. A Mechanical Design Engineer should have a good sense of three dimensional spatial orientation and seasoned knowledge of mechanical hardware design. An Electrical Design Engineer should have solid knowledge of circuit design and a wide range of electrical components.

Basic knowledge of closed loop control systems and good communication skills is also necessary.

ACCOUNTABILITIES:

1. Contribute to the development of new product requirements through consulting with customers and sales personnel.

2. Validate conceptual problem solutions by performing trade studies and analyses.

3. Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.

4. Operate as a key element in a team of creative, independent individuals.

5. Represent Moog in a manner consistent with its technical reputation.

6. Create reliable designs through a comprehensive experimental development test program.

7. Document designs, analyses, and test results with accurate and concise repo
 
Job Number: #4916AS
Job Location: East Aurora, Ny
Rate: 50/hr W2 Ceiling rate
Per Diem: N/A
Duration: 12 Months+
Start Date: ASAP
Input Date: 08/29/2017
Last Updated: 09/22/2017
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III

Description:
Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
**This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **
**Candidates should have 2 to 8 years of related work experience. No recent college graduates please**
**Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware**


Skills:
- 25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
- 25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
- 20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- 10%: Develops trade studies, design concepts, systems integration and component-level test plans.
- 10%: Supplier integration with external vendors
- 10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.


Education:
- A Bachelor's degree in Mechanical or Aerospace Engineering.
- Candidates should have 2 to 8 years of related work experience. No recent college graduates please.
 
Job Number: 7819
Job Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 04/03/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III / local preferred URGENT CA

Description:
160209/7333281

8 open positions

48/hr max

Manager is currently interviewing.

Job Title: Component Product Engineer (Project Engineer) II/III



Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **



* Candidates should have 2 to 8 years of related work experience. No recent college graduates please *



Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.

Skills:
25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.
10%: Supplier integration with external vendors
10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
A Bachelor's degree in Mechanical or Aerospace Engineering.

Skills:
Required

PROJECT ENGINEER COMPONENT ENGINEERING

State/Province: California
City/Town: Canoga Park

Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 03/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7333281
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 04/03/2018
Last Updated: 05/18/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Door Engineer

Description:
Composites Door Engineer guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions: 1. selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative CATIA V5 Experience Required Mechanical Systems Experience Required Composite Door Experience Desired Supplier Management Experience Desired


Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in the specific technical discipline or 15 yrs. broad engineering experience in several technical disciplines with Bachelors, or 8 yrs. in the specific technical discipline with Masters, or 6 yrs. in the specific technical discipline with PhD.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/22/2017
Last Updated: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer (6 openings)

Description:
Composite Structural Design Engineer (6 openings)
Location: Mojave, CA
Duration: 12+ months
Hourly rate: Open, DOE
Desired Skills: MICROSOFT OFFICE;CATIA; Structural design of primary and secondary composite aircraft structure.
Composite Structural Design Engineer Job Description
Perform preliminary and detail design of metallic and composite structure, including initial sizing of joints, structure layout and design for manufacturability.
Create 3D/2D definition of parts, assemblies and installations.
CATIA V5, Composites workbench is a plus.
Establish manufacturing tolerances for production of structural components using GD&T.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements
Works with Industrial Design team to develop conceptual designs for cabin interior
Develops rapid prototypes for evaluation throughout design development process
Develops 3D CAD models and 2D engineering definition for detail parts, assemblies, and installations inside the pressurized cabin
Establishes manufacturing tolerances for production of structural components
Develops and documents system requirements and interface constraints for components
Coordinates with Analysis and Testing departments to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes .
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)
Educational Requirements
Bachelor's degree from an accredited institution, with a concentration in Aeronautical and Astronautical, Aerospace, or Mechanical Engineering..
Composite Structural Design Engineer requirements:
3 years or more experience design engineering for aerospace composite fabrication and assembly processes.
Proficient with CATIA V5
Required Workbenches: Part Design, Assembly Design, Sketcher, Drafting, Wireframe and Surface Design
Desired Workbenches: Generative Shape Design (GSD), Composites (CPD) Experience using GD&T and ASME Y14.5M-1994 drafting standards
Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
Experience designing for aerospace environments
D_ _esired Experience in the development of human spaceflight hardware desired
Experience with Product Lifecycle Management (PLM) software and configuration management processes
Excellent analytical and decision-making skills Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.
Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook
Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
Composite Structural Design Engineer
The Structures Company, LLC is an AA/EOE.
 
Job Location: Mojave, CA
Rate: "open"
Per Diem: yes
Overtime: possible
Duration: 12+ month
Start Date: asap
Input Date: 09/19/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Senior / Design Engineer

Description:
RESPONSIBILITIES
Creates basic designs of aircraft interiors, structures and mechanical systems for Fit, Form and Function to meet customer criteria, quality standards, FAA requirements, budget and project schedules using Computer Aided Drafting/Design tools.
• Designs and checks aircraft interior furnishing and/or structures.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.

TARGET QUALIFICATIONS
• Bachelor's degree (B.S.) in engineering, minimum of 5 years relevant experience, or equivalent combination of education and experience. Aviation background and aircraft interior experience preferred.
• Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

IN-DEPTH KNOWLEDGE, SKILLS, AND ABILITIES
• Ability to design and check interior engineering drawings for Fit, Form and Function.
• Strong Computer Aided Drafting/Design skills using AutoCAD and/or Inventor.
• Three dimensional (3D) design/drafting skills are preferred.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally as part of an established and growing team.
 
Job Number: 17-712
Job Location: Northwest
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
All candidates must have a Bachelor’s degree to apply.

RESPONSIBILITIES
• Reviews Engineering design documents consisting of drawing, engineering order and parts list for consistency with company standards, design quality, requirements and its corrective interpretation.
• Also reviews 3D models used to produce 2D design are properly associated and provide repeatability and correct representation in the Digital Aircraft Model.
• Constant Interaction with Design teams to review/discuss issues and agree on acceptable solutions

TASKS
• Check Drawing, Engineering order and parts list for adherence to company standards.
• Check 3D information in CATIA and PLM System clearly describe and annotate issues found to designer and engineering design field
• Work with design team to solve issues identified
• Consult with design team and other checkers for interpretation provide inputs to management on major issues being identified and help develop alternatives for solutions

REQUIREMENTS
• 10 plus years of experience designing mechanical and/ or structural parts, assemblies or installations for aircraft
• 7 years of experience with CATIA and PLM Systems (preferably Teamcenter)
• 5 years of experience working with GD&T
• Very familiar with aircraft production and assembly methods
• BS Mechanical or Aerospace Engineering
• Experience with Composite materials a Plus
 
Job Number: 28-016
Job Location: Greensbo, NC
Rate: $48-$60 DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/20/2017
Last Updated: 12/18/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
1. Review 3D engineering data for conformance to requirements as directed.
2. Check parts for fit, form and function to the extent that information is available.
3. Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
1. Accuracy and completeness of engineering product definition data, including CAD and PDM data.
2. Proper application and compliance with all Engineering and customer drawing requirements.
3. Use and understanding of GD & T a must.
4. Dimensioning and tolerancing including familiarity with ASME Y14.5.
5. Application of best drafting and design practices and procedures.
6. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
7. Advise Design personnel regarding company drawing and design practices and procedures.
8. Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
9. Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
10. Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
11. Knowledge of company parts list & PdocM, a plus.
12. Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
1. Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
2. Ensures designs meet customer criteria, quality standards and FAA requirements.
3. Adheres to budget and project schedules.
4. Provides design guidance and feedback to other engineering personnel.
5. Other duties as assigned.
6. Knowledge of industry design and documentation standards.
7. Experience with mechanical assemblies and manufacturing technique design.
8. Ability to work independently and cross-functionally.
9. Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills.
10. Knowledge of Excel, Share Point software, Microsoft Office a plus

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-191
Job Location: Savannah, GA
Rate: $50.00 - $55.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Drafter UG/NX required / Solidworks desired NY

Description:
4924
Job title: Design Drafter
Number of openings: 1
Position location: East Aurora - NY
Employment type: Contract
OT exempt: No


Shift: 1st
Education Requirement: Associate’s Degree

Additional Shift Details:
Driving on company time?: No
Minimum Years of Experience: 8 years
Maximum Hourly Pay Rate: 35-40 max
Start Date: 09/11/2017
Tentative End Date: 09/28/2018

Function:

Reporting to the Supervisor of Drafting and under technical direction from Engineering the Mechanical Design Drafter, assumes the responsibility for layouts, models, and mechanical hardware drawings in support of development and product design. Tasks include organization and planning of the number and types of drawings, part selection, parts lists generation, developing complex design layouts and related packaging support documentation. The incumbent is responsible for performing Tolerance Analysis in conjunction with utilization of GD&T methodologies to meet both design, manufacturing, and inspection requirements. The incumbent must also have a working knowledge of configuration management control of product design.
Ideally experience and in-depth knowledge in utilization of NX Mcad design software is required. Additionally experience using 3D Mcad software package ie: Solidworks is a plus. Experiential knowledge of Teamcenter PLM is desirable as well.

NATURE AND SCOPE OF POSITION:
The incumbent will work closely with Design Engineering, developing their thoughts and sketches into layouts, drawings, and schematics. He / She should be capable of spatial visualization developing conceptual designs leading to the creation of design layouts for exploring possible design approaches. The incumbent will need the judgment to evaluate and present design alternatives, drawing knowledge from previous designs for incorporation into product and manufacturing ideas. The Design Drafter may have the latitude to make design decisions based on the confidence earned from their respective engineer. The incumbent will need to logically weigh these decisions and possess the judgment to know when to seek technical direction from the responsible Engineer.
At times it may be necessary for him/her to contact or participate in meetings with other disciplines to discuss design or fabrication requirements and feasibility. This interface includes but is not limited to Design Engineering, Product Engineering, Manufacturing Engineering, Shop and Lab, and possibly outside vendors. As part of this process, the Design Drafter may be involved as a member of concurrent product development teams. He/She must be aware of design to cost, manufacturability, and feasibility of assembly.

The duties consist of participating in the graphical evolution of new products from layout to drawings including correctness of proportion, arrangement of internal components, necessary dimensional information and material and/or process suggestions. The incumbent produces final drawings developed and dependent on 3D/Solid models working independently or in conjunction with others. The design drafting process requires the incumbent to utilize the Moog’s (MCAD) System(s) (NX Preferably, Solidworks, ) to produce a variety of drawings and layouts to enable better visualization, clearance checks, and also provide manufacturing information for Computer Aided Manufacturing (CAM) operations. Competent capability of the use of Moog’s MCAD and PLM Systems is essential.


Education: Associates degree in a Technical Field

Other Requirements

Perfect candidate will have fluids, actuator, space and defense experience.

Request status: Open
 
Job Number: MB-4924
Job Location: East Aurora, NY
Rate: 35-40/hr max
Duration: 12 month contract
Input Date: 09/28/2017
Last Updated: 10/03/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Position requires expertise and experience in design of rotating equipment including bearing analysis (A.B.Jones), spur and bevel gear design and analysis (AGMA), aluminum castings and lubrication and cooling systems. Minimum of 2000 hours experience with Pro/E\Creo (Pro/E\Creo preferred) or CATIA is necessary. Working knowledge of Geometric Dimensioning and Tolerancing is a requirement. Experience in mechanical system integration and development. Analytical knowledge of Reliability, FEA, Nastran and Six Sigma are desirable. Familiarity with formal Qualification Standards such as DO160, MIL-STD-810 or EUROCAE ED-14 is desirable. Job function requires timely preparation of all associated engineering documentation including but not limited to Project Plans, Test Plans and Engineering Changes.

Benefits:
Relocatopm Bonus
Immediate Health Benefits
401k
Tuition Reimbursement
Stock Purchase
 
Job Location: Park City, UT
Input Date: 10/25/2017
Firm Name: APA SERVICES
Attention: Kami Muehlberger
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Must have a secret clearance

Experience with all aspects of mechanical design, including layout, documentation and checking (per IAW ASME Y14.24) and be familiar with MIL-T-3100 and MIL-STD-100. Five to ten years experience of creating Pro-E / CATIA drawing and drawing release. Proficiency with Pro-E / Windchill is required.
 
Job Number: 40587
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 08/30/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Design Engineer
East Aurora, NY
12+ month contract

This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components and systems. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.


NATURE AND SCOPE:

The Design Engineer typically reports to an Engineering Manager, Section Head or Group Leader within the department and on demanding projects he/she might work under the leadership of a Senior Design Engineer. The incumbent receives instructions on specific assignment objectives, complex features, and possible solutions. He/She is expected to make independent and unreviewed decisions on routine technical matters.

The Design Engineer is a key contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. The Design Engineer generally will operate as part of a design/development team, which includes other Department engineers with his/her primary concern being component design.

Successful mechanical designs require judicious material selection, effective use of stress analysis, and sometimes design of unique kinematic mechanisms. Successful electrical designs require intelligent component selection and effective use of thermal stress analysis. Circuit designs must be reliable and make optimal use of available space.

Required:

MS Degree preferred in Mechanical, Aeronautical, or Electrical Engineering plus 3 years of design experience

Alternatively, BS Degree plus 6 years of design experience

Self-starting instincts

Strong analytical skills

3D spatial orientation

Mechanical hardware design.

Circuit design and a wide range of electrical components.

Basic knowledge of closed loop control systems

Good communication skills
 
Job Number: 52252
Job Location: East Aurora, NY
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: 9/5/17
Input Date: 08/29/2017
Last Updated: 09/21/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Electrical

Description:
ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Research aircraft systems and components as necessary to perform assignments.
• Design and develop engineering solutions in support of innovative concepts, and the replication and modification of existing electrical and electromechanical designs.
• Develop, analyze, and substantiate low to high complex repair solutions for mitigating all kinds of electrical issues.
• Provide design and repair engineering assistance in support of mechanical and composite projects when assigned.
• Create technical documents for certification, maintenance and operation of various types of projects.
• Produce structural, technical and sometimes market analysis for which FAA approval can be obtained to ensure compliance with all appropriate regulatory, customer, OEM, production and management requirements.
• Create various types of engineering drawings using common CAD software such as AutoCAD and SolidWorks.
• Perform mechanical and electrical assembly when assigned.
• Ensure all applicable customer, OEM, FAA, and maintenance requirements are met.
• Approve engineering documents within authorized signatory level.
• Train and assist other engineers in performance of their assigned tasks.
• Participate in the development of work statements and hour estimates in support of project proposals.
• Represent company on engineering technical matters with OEM’s, customers, operators and regulatory authorities.
• Interact in a professional manner with members of internal and external organizations.
• Independently evaluate, select, and adapt to situations. Modify techniques, procedures and criteria to solve problems encountered.
• Monitor and approve engineering use of Customer, OEM, and other technical data to ensure compliance with all appropriate regulations and requirements.
• Ensure projects are accomplished within a reasonable time frame as defined by a Project Lead or Engineering Management.
 
Job Location: Everett, WA
Input Date: 09/07/2017
Firm Name: APA SERVICES
Attention: Kami M Muehlberger
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Mechanical

Description:
SKILLS AND KNOWLEDGE:
• Ability to solve practical problems and deal with variables in an environment where limited standardization exists.
• Must be adaptable and flexible at all times and apply knowledge and skills to develop creative solutions to a wide variety of unique design, modification, and repair problems encountered.
• Strong PC skills will include e-mail, word processing, spreadsheet, communications, operating systems, and advanced computer drafting skills.
• Ability to accomplish basic stress analysis and substantiation for complex repairs or modifications using standard accepted industry practices and other structural design methodologies.
• Ability to understand regulatory requirements for airworthiness, for the FAA and various foreign authorities (JAA, JAR, CAA, DGAC, CAAC, etc.) and include in engineering documents, drawings and designs.
• Ability to understand and promote the policies / procedures of company and company Engineering.
• Ability to understand and apply the policies / procedures of all customer(s).
• Ability to understand and apply information from Structural Repair Manuals (SRMs), Aircraft Maintenance Manuals (MMs), Illustrated Parts Catalogs (IPCs), Service Bulletins (SBs) and other aircraft reference materials.
• Ability to interpret and use aircraft manufacturing, assembly, and installation drawings.
• Assertive communication skills are required.
 
Job Location: Everett, WA
Input Date: 10/03/2017
Firm Name: APA SERVICES
Attention: Kami M Muehlberger
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer / development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components NY

Description:
Request number: 4916
Date created: 08/28/2017
Job title: Design Engineer
Number of openings: 2

Position location: East Aurora - NY
Employment type: Contract
OT exempt: No

Shift: 1st
Education Requirement: MS/MA
Driving on company time?: No

Maximum Hourly Pay Rate: 50
Start Date: 09/05/2017
Tentative End Date: 08/31/2018

Job Description
Function: GENERAL FUNCTION:

This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components and systems that will become the new products of Moog, Inc. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.

DIMENSIONS:

Expected annual production sales from projects: $4M to $10M

NATURE AND SCOPE:

A variety of technical functions exist within the Design/Development Engineering Department. Reporting to the division's Chief Engineer typically are Associate Engineers, Development Engineers, Design and Project Engineers, Senior Design and Senior Project Engineers, Senior Staff Engineers, and Principal Engineers, as well as Engineering Managers, Section Heads or Group Leaders. The Design Engineer typically reports to an Engineering Manager, Section Head or Group Leader within the department and on demanding projects he/she might work under the leadership of a Senior Design Engineer. The incumbent receives instructions on specific assignment objectives, complex features, and possible solutions. He/She is expected to make independent and unreviewed decisions on routine technical matters. However, assistance is furnished on unusual problems and work is periodically reviewed for application of sound professional judgment.

The Design Engineer is a key contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. The products of Moog generally are unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The Design Engineer generally will operate as part of a design/development team, which includes other Department engineers with his/her primary concern being component design. The incumbent must effectively coordinate the work of drafters, technicians, and others who assist in specific assignments.

In the early stages of a new program, the project team will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations. Under the technical direction of the Engineering Manager, Section Head or the team's lead engineer, the Design Engineer will then guide the evolution of the conceptual design, technical project planning, detail design, and development testing. This requires some travel and the participation in presentations to customers.

The Design Engineer will apply creative skills to generate designs that fulfill the conflicting requirements of meeting performance goals, robustness over extreme conditions, minimum weight, awkward envelopes, and cost effectiveness. Successful mechanical designs require judicious material selection, effective use of stress analysis, and sometimes design of unique kinematic mechanisms. Successful electrical designs require intelligent component selection and effective use of thermal stress analysis. Circuit designs must be reliable and make optimal use of available space.

To be considered for the position of Design Engineer, a candidate should have a minimum of an MS Degree, preferably in Mechanical, Aeronautical or Electrical Engineering plus three years of design/development engineering experience. As an alternative, the candidate would have a BS Degree plus six years minimum of design/development engineering experience. To fulfill the demands of design and development of new products the individual must have self starting instincts and strong analytical skills. A Mechanical Design Engineer should have a good sense of three dimensional spatial orientation and seasoned knowledge of mechanical hardware design. An Electrical Design Engineer should have solid knowledge of circuit design and a wide range of electrical components.

Basic knowledge of closed loop control systems and good communication skills is also necessary.

ACCOUNTABILITIES:

1. Contribute to the development of new product requirements through consulting with customers and sales personnel.

2. Validate conceptual problem solutions by performing trade studies and analyses.

3. Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.

4. Operate as a key element in a team of creative, independent individuals.

5. Represent Moog in a manner consistent with its technical reputation.

6. Create reliable designs through a comprehensive experimental development test program.

7. Document designs, analyses, and test results with accurate and concise repo
Essential job functions: manufacturing and procurement as well as mechanical assembly and testing will be required.

Request status: Open
 
Job Number: JE-4916
Job Location: East Aurora, NY
Rate: 50/hr max
Duration: 12 month contract
Input Date: 09/08/2017
Last Updated: 09/28/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Die Engineering Leads - Auburn Hills, MI

Description:
STS AeroStaff Services is hiring Die Engineering Leads for open positions in Auburn Hills, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Conduct Stamping Simulation, Sheet metal Die Development, Die Compensation, Die Manufacturing, Die trial and Virtual Die Tryout in conjunction with Project Management and Customer Engineering teams
• Perform binder development and draw simulations to ensure safe panels per customer requirements and standards within program timing constraints
• Analyze spring back, surface abnormalities and other non-conformance and recommend compensation or other countermeasures
• Develop trim lines, die faces and break lines per customer standards and product requirements
• Understand GD&T and tolerance stack ups, make recommendations for to ensure feasible product can be released within program timing constraints
• Perform scrap shed analysis and enact countermeasures for non-conformance areas
• Provide feedback to die build source for optimal die processes and die designs
• Interact with customer Product teams and Project Management to ensure feasibility of all details within timing requirements
• Support of cost reduction/value engineering initiatives
• Use of software, including but not limited to Autoform, Dynaform, Omnicad, CATIA V5 R19, UG NX, and LS Dyna 5.7

Qualifications:

• B.S. in Materials Science, Mechanical Engineering, Industrial Systems Engineering, or relevant area of study Graduate degree is preferred
• 2 – 5 years of experience with Autoform, Dynaform, Omnicad, CATIA V5 R19, UG NX, and LS Dyna 5.7
• Understanding of modeling concepts that correlates with actual die construction
• Must be able to collaborate and work in a team environment with a high level of interpersonal skills
• Must be able to create technical reports and have excellent presentation skills
• Must have a basic understanding of sheet metal forming principals
• Keep up to date with latest die processes and tooling trends to maintain industry leading skills
• Extensive understanding of sheet metal forming principals, materials commonly used in today’s applications and be able to recommend material alternatives based on application and product geometry
• High level of analytical ability where problem solving is a must
• Excellent written and verbal communication and presentation skills

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40026
Job Location: Auburn Hills, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/07/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Diesel Technician - Vehicle Product Validation and Testing

Description:
Job Title: Diesel Technician - Vehicle Product Validation and Testing
Location: Portland, OR 97217
Duration: 1 2 Months
Job Details
• This is a great vehicle diesel technician position that gets you involved in validating of new prototype test vehicles for a major truck manufacture located in Portland, Oregon.
• Diesel Technicians will work in the vehicles validation and testing department of new up and coming vehicles that are not yet released to be sold. The Validation group responsibilities is to install one off or several prototype mechanical or electrical components for testing and product improvements purposes. You’ll also be doing engine diagnostics of electrical and mechanical components and repairing or replace any component failures on engine, transmission, suspensions, exhaust and other areas of the vehicle when products fail.
• As a validation diesel technician, you’ll be writing up engineering reports of the vehicle component failures in detail for the engineering validation team to review. You’ll work closely with the mechanical and electrical engineers that are responsible for the components. Verify and go over and validate any component failures or improvements with team members.
• You’ll also keep current fleet maintained and running well by doing normal scheduled maintenance work such as oil and air filter changes, brake replacements, tire rotations and other normal scheduled maintenance during the validation and testing period of the test fleet.

Education:
• Diesel Technician Technical School (or) Associates Degree in Diesel Technician

Requirements:
• Must have 2+ years of diesel technician experience
• Must have your own tools
• Be a quick leaner
• Have good communication skills
• Work well with others.
 
Job Number: 3410
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 Months
Start Date: ASAP
Input Date: 09/05/2017
Firm Name: OLSA RESOURCES INC
Attention: Sarabjit Saxena
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafter 4 / Catia V5 V6 Teamcenter CA

Description:
160178/1609
Drafter 4 (Job Number: 17018411)

Number of Openings: 2

Location(s): United States-California-San Diego


Shift: 1st Shift

Target Start Date: Oct 2, 2017

Title: Drafter 4

Rate: $30 - $40/hour

Location: San Diego, CA

Positions: 2 Total

Duration: 6 Months

Shift: 1st Shift - 9/80

Position Summary / Responsibilities
Plans, lays outs, draws, and revises detailed part, assembly, and installation engineering drawings from basic layouts, established references, and standard data in a field of specialization such as structures, devices, mechanics, electrical, or electronics. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA. Completes details of major layout drawings prepared by others in accordance with standard engineering drafting practices. Determines scaling; inserts necessary reference planes, centering and dimension lines, hidden line interpolations, and sectioning; prepares specifications for parts, assemblies, and installations; prepares complete production detail drawings; contributes design modifications to improve quality of product or facilitate manufacturing operations.


Basic Qualifications:

•Experience with Drawing Releases
•Experience with Product Lifecycle Management
•TeamCenter
•AA or other 2 year technical degree in related discipline and 6 years related experience.

Preferred Qualifications:

•CATIA V5/6
•Experience with NG Products (Triton)
•Experience with Commercial Electronics
•19 in. standard rack mounting and computer specification experience
 
Job Number: MB-17018411
Job Location: San Diego, CA
Rate: 30-40 DOE
Duration: 6 month contract
Input Date: 09/19/2017
Last Updated: 09/28/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafter – CAD/Manufacturing Engineering

Description:
Seeking a Drafter – CAD/Manufacturing Engineering for an opening in Anaheim, CA.

RESPONSIBILITIES:
1. Create 2D Autodesk Inventor views for assembly using the 3D Autodesk Inventor model.
2. Draft 2D Drawings in Inventor and apply GD&T.
3. Develop assembly instructions in Excel and Paint using the 2D Inventor views.
4. Generate Engineering drawings, schematics, wire lists and Bill of Materials of electro-mechanical assemblies.
5. Generate Engineering Change Requests (ECR) in Agile system.
6. Create routers and Kit by Operation in Make-To-Order system (MTO).
-To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

REQUIRED EXPERIENCE:
1. Knowledge of Mil-Specifications.
2. Familiar with military and commercial standards pertaining to hardware, material and processes.
3. Capable of handling multiple projects simultaneously.
4. Knowledge of machine shop practices.
5. Practical Drafting experience required.

-Must have one-year experience in AutoCAD and Autodesk Inventor.
-Must have one-year experience in 2D drafting using GD&T.
-Must have one-year experience in using Excel and Paint.

MATHEMATICAL SKILLS
Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The noise level in the work environment is usually moderate.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80, Full-Time
 
Job Number: 165116
Job Location: Anaheim, CA
Rate: $33.00
Duration: 6 Months
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafting Checker (aerospace)

Description:
Drafting Checker
Greensboro, NC: location
Duration: 9+ months
contract rate: DOE

Job Summary
Design Checker
Desired Skills
ROBOTICS;CATIA;Design Checker
Job Description Rich
 
General Summary: 
Review Engineering Design Documentation consisting of Drawing, Engineering Order and Parts List for consistency with company standards, drawing quality and drafting requirements. Also review 3D dataset to ensure correct design representation in the Digital Aircraft model.
 
Duties and Responsibilities:
1.     Check Drawing, Engineering Order and Parts List for adherence to company standards;
2.     Check 3D dataset in CATIA V5 and PLM System.
3.     Participate to design reviews and provide guidance to design team regarding drafting rules and dimension & tolerance requirements.
4.     Collaborate with Design and Integrated Product Teams to solve issues identified during the reviews.
5.     Document and communicate issues found during reviews.
6.     Consult with design team and other checkers for interpretation or drafting rules.
7.     Act as a Subject Matter Expert regarding interpretation and application of drafting rules.
8.     Provide inputs to management on major issues being identified and help develop alternatives for solutions.
 
Education, Work Experience, Certification and/or Licensure:
1.     10+ years of experience designing mechanical and / or structural parts, assemblies or installations for aircraft.
2.     At least 7 years of experience with CATIA and PLM Systems (preferably Teamcenter).
3.     5 years of experience working with GD&T and 5 years of experience checking Aerospace Drawings.
4.     Candidate must be detail oriented.
5.     BS Mechanical or Aerospace Engineering.  Experience can used in lieu of education.
6.     Experience with composite materials is a plus.
 
Knowledge, Skills and Abilities:
1.     Familiarity with aircraft production and assembly methods.
2.     Ability to address issues identified in a direct but respectful way.
3.     Ability to consistently apply defined criteria.
4.     Able to work with people with diverse corporate / design culture background.
Physical Requirements:
1.     Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2.     Incumbents may be required to sit, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3.     Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
4.     Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
5.     Read, hear, speak, and see with no restrictions, as required by job duties.
6.     Comprehend and adhere to management directions and/or safety instructions with no restrictions.
7.     Effectively communicate in Business English language.
8.     Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
9.     Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.  
 
 
Notes
401K
6 paid holidays
Annual bonus

The Structures Company LLC is an AA/EOE.
 
Job Location: Greensboro, NC
Rate: open
Per Diem: yes
Overtime: possible
Duration: 9_+ months
Start Date: asap
Input Date: 09/29/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS Flammability

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

We are looking for an ECS Engineer with a focus on Flammability

Responsibilities:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Verifying Comportment ventilation and drain from the view point of fire marshal
Engine and APU Compartment Ventilation/Fire extinguisher from the viewpoint of fire marshal
Prepare test reports.
Domestic and occasional international travel is required.
Requirements:

Flammable Fluid Test, Report, Document, Design for company and certification
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 09/09/2017
Last Updated: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Test Engineer

Description:
Electrical Test Engineer: Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns. Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired.

Experience should also include five years working on the testing of complex mechanical systems, testing of electrical systems and components such as motor controllers, actuator controls, & system controllers. Capability of working independently and is self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required. T
 
Job Number: CT38872
Job Location: Windsor Locks, CT, CT
Rate: 67.00
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Input Date: 09/06/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineers - Irvine, CA

Description:
STS AeroStaff Services is hiring Electrical Engineers for open positions in Irvine, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The EE in this position will be responsible for the design, implementation and testing of electrical/electronic systems for new unmanned vehicles. The ideal candidate will participate in requirements and design reviews, translate requirements into electrical designs. The candidate must work well with customers, contractors, and mechanical engineers to effect implementation of system requirements. The EE reports to the Chief Engineering, Program Manager and Technical Director.

Job Duties:

• Perform studies, trades, and analysis as required to support system requirements and their evolution
• Electrical circuit design, experience with modifying existing designs or create new designs
• Proficient in electrical CAD tools for schematic capture and PCB layout
• Knowledge of wire harness design, including selection of connectors, wires and cables
• Work with designer to lay the cable runs into the CAD model of the airframe
• Document systems design, systems analysis, system interface design, and systems integration
• Familiar with embedded board systems design
• Embedded systems and microcontroller implementation and programming
• Knowledge of common data bus standards and implementations
• Interact with customers regarding new capability implementation and integration into an existing network infrastructure
• Interface effectively with users, customers, management, and other engineering personnel
• Proven teamwork and interpersonal skills with the ability to act in a mentor role and be an advocate for positive change
• Possess strong verbal and written communications skills
• Ability to create and follow standard processes and clearly document results
• Knowledge of aircraft electrical systems

Basic Qualifications:

• 5-9 years’ with Bachelors of Science (engineering degree preferred); 3-5 years’ with Masters; 10-13 years’ of experience may be considered in lieu of degree

Preferred Qualifications:

• Familiar with the Microchip PIC family embedded systems
• Altium Schematic and Board Layout
• UAV/Aircraft Integration and Testing
• Accustomed to working with SAE or DoD standards for aircraft electrical systems
• Knowledge of power generation and conversion systems
• Knowledge of airborne communications hardware (standard interfaces and protocols, networking, SATCOM, data links, cellular, etc.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39974
Job Location: Irvine, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/31/2017
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer

Description:
Role: Electrical Test Engineer

Location: Windsor Locks CT 06096

Duration:1 year+
•Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired.
•Experience should also include five years working on the testing of complex mechanical systems, testing of electrical systems and components such as motor controllers, actuator controls, & system controllers.
•Capability of working independently and is self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

Education Bachelors
 
Job Number: 52328
Job Location: Windsor Locks, CT
Input Date: 09/13/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bala
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical. FLT CNTRL/SIM. LABS

Description:
FUNCTION
Assist with the buildup and installation of Flight Control, Avionic, and Simulation laboratory test facilities.

JOB DUTIES
Assemble required wiring harnesses, test boxes, and laboratory test equipment.

SKILLS/EXPERIENCE
- Experience with electrical and electronic fabrication.
- Must have experience with fabrication of Military style connectors and aircraft wiring harnesses and systems.
- Experience with all the tooling and dies required to terminate mil-spec wires
- Experience terminating EMI harness assemblies
- Experience fabricating wire harnesses
- Experience fabricating test sets
- Experience using hand tools, mechanical and electrical
- Experience with schematics and electrical diagrams
- Evidence of Lockout Tag Out Authorized training

OTHER REQUIREMENTS
- Requires Safety shoes
- Must be able to support extended shift operations, scheduled weekend work, possible shift changes.
 
Job Number: 16-604-1396
Job Location: Northeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Mechanical Engineering Contractor

Description:
UNIQUE SKILLS
Ideal Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to: - 3D wire routing - EWIS - Cabin Management System - Cabin Entertainment System - Cabin Lighting - Cabin Switch Controls - Telephone System - Satellite communications - Water System - Waste System - Cabin interior monuments - Seats Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.

ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-725-102177
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Los Angeles area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065207
Job Location: Los Angeles, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJcAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Diego area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065205
Job Location: San Diego, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJIAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Phoenix area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065209
Job Location: Phoenix, AZ
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Terry Brooke
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJmAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Jose area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065206
Job Location: San Jose, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJXAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ElectroMechanical Engr - Level 3 with active secret TX

Description:
159948
Requirement# MFC-REQ-1432
Work Location GRAND PRAIRIE, TX
Work Week 9/80-A Priority
Needed Date 08/22/2016
End Date 07/05/2018
Number of Resources 1
Security Clearance Secret

Type of Service: Engineering
Title: ElectroMechanical Engr - Level 3

Description
Lockheed Martin is seeking a Hardware Electro-Mechanical Packaging Design Engineer for a position in Grand Prairie, TX who will be responsible for missile harness design and 3D routing and general packaging support. Activity will require: Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. Research, development and design of components, equipment and networks for military applications. The engineer will be responsible for interfacing with electrical engineers in interpreting system interconnect diagram(s), harness schematics, and providing guidance for improving the layout based on best physical routing practices. The engineer will also be responsible for harness piece-part/component selection to meet interfacing hardware and environmental requirements. Clearance status required on resume.
Skill/Experience/Education
Mandatory:

- Requires 5 or more years of electro-mechanical design experience of airborne avionics, missile and/or ground-based equipment. Design experience should include electrical cable and/or network design and general electro-mechanical design. - Candidate must have experience with cabling / harness design. - The engineer must be proficient with the Pro/Cable module in Creo, have good communication skills, and be able to work with internal and external customers. The ability to work with minimal oversight.
Desired:

Knowledge of Lockheed Martin MFC (Dallas) procedures in CAD modeling and working knowledge of military and / or industry hardware specifications.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Electronic Package Design Modeling and Drafting 4-5 Years Yes
Harness Design Pro/Cable (Creo) 4-5 Years Yes



Interview Required Yes
Max Pay Rate 65.00 USD
Shift 1st Shift
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
 
Job Number: JE-1432
Job Location: Grand Prairie, TX
Rate: 65/hr max
Duration: 12 month contract
Input Date: 09/11/2017
Last Updated: 09/18/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electronic Assemblers Needed in Redmond, WA

Description:
PDS Tech has an immediate need to fill several Electronic Assembler positions in Redmond, WA.  If you are skilled at electronic assembly, please apply online today, or respond with your resume to: 
 Seattle_wa@pdstech.com

Some of your responsibilities as an Assembler will include:
  • Assemble fabricated parts at floor stations. 
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications. 
  • Use hand tools and power tools to assemble units according to product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.
  • Specific tools used will be tweezers, vacuum wands and torque drivers.


These positions are contract to hire, based on individual work performance, attendance/dependability, and business needs.

All shifts are available.

  


 
Requirements:
  • Experience working with microscope and microscopic components.
  • Soldering skills and experience.
  • Basic computer skills.
  • High school diploma or its equivalent.
  • US citizen or permanent resident.
  • English language comprehension and communication abilities.

 
Job Number: 1710071348
Job Location: Redmond, WA
Duration: 6 months
Input Date: 07/31/2017
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i5000000237QZAAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Manufacturing Engineer - Aerospace

Description:
Electronic Manufacturing Engineer - Aerospace and Defense

Ingenium Technologies - San Diego, CA
Contract- Contract to Hire

Must be a US Person.

A Manufacturing Engineer - Contract - is needed for a proven and reliable world leader in Aviation Air-to-Ground Communications, Aircraft Systems and Tactical Reconnaissance Radars, as well as advanced high-resolution Surveillance Systems.

Responsibilities:

Support the design, first article, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all platforms. Assemblies will include surface mount as well as through hole technology and mechanical assembly

Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.

Specify and implement automation equipment and processes.

Identify and assist in addressing safety issues on the manufacturing floor.

Support manufacturing production planning and coordination, execution and operations process development.

Provide production support to assemblers and leads.

Document manufacturing processes and assembly work instructions in conjunction with T&O Planning.

Design shop aids and tooling to assist production.

Disposition non-conforming parts, identify root cause, and implement corrective and/or preventive action to reduce scrap and rework.

Collaborate with Design Engineering during prototype, development and first article manufacturing.

Clearly and effectively communicate both verbally and in written form to both technical and non-technical audiences, especially regarding manufacturing processes, engineering issues and proposed changes, and quality issues and dispositions.


Software Requirements:

Experience with SAP, Microsoft Office Project and Visio
Database knowledge in Oracle and FileMaker


Required Experience:

5 to 15 Years experience in aerospace composite manufacturing, processing and materials knowledge.
Experience with IPC & MIL standards, including: IPC/WHMA-A-610 and 620 , J-STD-001
Knowledge of the requirements for Soldered Electrical and Electronic Assemblies, MIL-STD-1553 %u2013 Digital Time Division Command/Response Multiplex Data Bus, MIL-STD-1760 %u2013 Aircraft Electrical Interconnection System, SAE-AS39029 (MIL-C-39029)
Experience implementing capital equipment in factory environment.
Experience with MRP systems, eg SAP or MTO/WDS. Experience with Microsoft Office Project and Visio.
Experience with programming and databases, e.g. Oracle and FileMaker. Knowledge of SQL.
Experience with process mapping and demand flow technology
Strong background in electro-mechanical assemblies.
Six Sigma Green Belt preferred


Required Education: Bachelor's degree is required.

Position: Contract to Hire, 6mos or longer


Location: San Diego, CA


Employment Criteria : This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Citizen, who does not work for a foreign company/foreign government/foreign governmental agency or organization, and is in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 95014
Job Location: San Diego, CA
Rate: $55.00
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: Now
Input Date: 09/13/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: David Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 04/07/2017
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

Electronics Technician

Description:
Chipton-Ross is seeking a Electronics Technician in Santa Barbara, CA.

Description
Provides engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

Skill/Experience/Education
Mandatory:
Integrated Circuit Layout Technician. SBF is seeking an experienced integrated circuit technician to help advance the state of the art in infrared and visible imager readout integrated circuits (ROICs). Significant experience with physical layout of mixed signal VLSI CMOS transistor level designs is required. The selected candidate will perform silicon layout of analog and digital submicron transistor level designs in support of advanced infrared cameras and imagers. Designs include ultralow noise analog circuit blocks, low power analog to digital conversion, high speed multi GHz data transmission and serializers. MUST HAVE CMOS integrated circuit layout experience.

Desired:
Schematic capture, design verification and simulation.
 
Job Number: 165226
Job Location: Santa Barbara, CA
Rate: $DOE
Duration: 12 months
Input Date: 09/13/2017
Last Updated: 09/24/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Level 2 with active secret TX

Description:
159734/1412
Title: Embedded S/W Engineer - Level 2
Grand Prairie, TX
80/hr max
Active secret required to start

Description
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Must have Secret clearance in place prior to submittal of resume. Resume must have status of clearance stated.

Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, Linux (Red Hat), and Embedded SW Engineering
Desired:

Razor (CM Control), Domain Knowledge of Air and Missile Defense, Seeker Programming and/or Integration, Hardware-in-the-Loop (HWIL) - Unit Under Test Experience, Embedded SW Engineering


US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Razor (CM Control) 0-3 Years No
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years No
Seeker Programming and/or Integration 4-5 Years No
Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years No
Embedded SW Engineering 4-5 Years Yes


Interview Required Yes
Max Pay Rate 80/hr
Shift 1st Shift
OT Allowed No
Travel Yes (Various)
Travel Description Travel to customer locations (as required)
Exempt
 
Job Number: JE-1412
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 07/21/2017
Last Updated: 09/25/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80, no OT
Travel: Yes, to customer locations as required

** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-US DOD Secret Clearance Required (4-5 years experience)
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
-C/C++ (4-5 years experience)
-Linux (Red Hat) (4-5 years experience)
-Embedded SW Engineering (4-5 years experience)

Desired:
-Razor (CM Control)
-Domain Knowledge of Air and Missile Defense (4-5 years desired)
-Seeker Programming and/or Integration (4-5 years desired)
-Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT) - (4-5 years desired)
 
Job Number: 7561
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 06/21/2017
Last Updated: 10/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-US DOD Secret Clearance Required (4-5 years experience)
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
-C/C++ (4-5 years experience)
-Linux (Red Hat) (4-5 years experience)
-Embedded SW Engineering (4-5 years experience)

Desired:
-Razor (CM Control)
-Domain Knowledge of Air and Missile Defense
-Seeker Programming and/or Integration
-Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT)
 
Job Number: 7295
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 04/11/2017
Last Updated: 10/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine Control Logic Analyst

Description:
Engine Control Logic Analyst

Jupiter, FL
1 year Contract
Pay Rate: $60.00-70.00/Hr

1st Shift

Duties:
Engine Control Logic Analyst to support Hypersonics program.



** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage, Sterling or Talentwise. See attachment for specific background check onboarding requirements **



Keywords:

-Hypersonics

-Control Systems

-Requirements

-Programming

-Embedded Software

-Logic

Skills:
Required:

Familiarity with industry standards for engine control software design (P&W SEPG-0-000, NASA NPR 7150.2A, ISO 12207, DO-178C or other industry standard).
Good technical writing skills.
Project/schedule management skills.
Requirements generation skills.
Ability to translate engine operation requirements into engine control logic flow diagrams.
Proficiency with MS Office: Word, EXCEL and Powerpoint.
Desired:

Experience/proficiency with the following tools and computing platforms is desired: Windows, Alpha/VMS, C Programming, Pictures-to-Code, Matlab/Simulink, Unigraph.
Experience with linear model generation and control loop gain sizing and stability analysis.
Familiarity with Aerojet Rocketdyne procedures (AR ENG-P-4.03.04)


Education:
B.S. or M.S. in Mechanical or Aerospace Engineering
 
Job Number: 7883
Job Location: Jupiter, FL
Rate: 50-70
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/12/2017
Last Updated: 11/27/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine Control Logic Analyst

Description:
Keywords:
-Hypersonics -Control Systems -Requirements -Programming -Embedded Software -Logic

Skill Required:
Familiarity with industry standards for engine control software design (P&W SEPG-0-000, NASA NPR 7150.2A, ISO 12207, DO-178C or other industry standard).
Good technical writing skills.
Project/schedule management skills.
Requirements generation skills.
Ability to translate engine operation requirements into engine control logic flow diagrams.
Proficiency with MS Office: Word, EXCEL and Powerpoint.

Desired:
Experience/proficiency with the following tools and computing platforms is desired: Windows, Alpha/VMS, C Programming, Pictures-to-Code, Matlab/Simulink, Unigraph.
Experience with linear model generation and control loop gain sizing and stability analysis.
Familiarity with Aerojet Rocketdyne procedures (AR ENG-P-4.03.04)

Education:
B.S. or M.S. in Mechanical or Aerospace Engineering
 
Job Number: SH375839
Job Location: Jupiter, FL
Rate: 70
Duration: 2 months
Start Date: ASAP
Input Date: 09/12/2017
Firm Name: CDI CORPORATION
Attention: Stephen Harwan
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine Control Logic Analyst with active secret URGENT FL

Description:
160331/7443403

Job Title: Engine Control Logic Analyst
Keywords:
Number of Positions: 3

Remaining Positions: 3

Duties:
Engine Control Logic Analyst to support Hypersonics program.



** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage, Sterling or Talentwise. See attachment for specific background check onboarding requirements **



Keywords:

-Hypersonics

-Control Systems

-Requirements

-Programming

-Embedded Software

-Logic

Skills:
Required:

Familiarity with industry standards for engine control software design (P&W SEPG-0-000, NASA NPR 7150.2A, ISO 12207, DO-178C or other industry standard).
Good technical writing skills.
Project/schedule management skills.
Requirements generation skills.
Ability to translate engine operation requirements into engine control logic flow diagrams.
Proficiency with MS Office: Word, EXCEL and Powerpoint.
Desired:

Experience/proficiency with the following tools and computing platforms is desired: Windows, Alpha/VMS, C Programming, Pictures-to-Code, Matlab/Simulink, Unigraph.
Experience with linear model generation and control loop gain sizing and stability analysis.
Familiarity with Aerojet Rocketdyne procedures (AR ENG-P-4.03.04)


Education:
B.S. or M.S. in Mechanical or Aerospace Engineering


Skills:
Required

ENGINE CONTROLSCONTROL SYSTEMSREQUIREMENTS ANALYSISEMBEDDED SOFTWAREAEROSPACE


State/Province: Florida
City/Town: Jupiter

Start Date: 10/02/2017 Hours Per Week: 40.00
Est. End Date: 12/31/2017 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7443403
Job Location: Jupiter, FL
Rate: 70/hr max
Duration: 12 month contract
Input Date: 09/25/2017
Last Updated: 10/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer SolidWorks

Description:
We're seeking a Mechanical Engineer that knows how to use SolidWorks in developing Mirrors, Horns and possibly some interior plastic components too.

Our client is seeking for some immediate help for a few months with a possible extension depending on project load and up coming programs. This position is working on a new program and have an immediate need for a SolidWorks CAD/Design person that is well versed in SolidWorks and have experience in FEA analysis, bills of material, project timing and design of mechanical parts.
 
Job Number: 3475
Job Location: Grandville, MI
Rate: DOE
Per Diem: Possible
Duration: 2+ months
Start Date: ASAP
Input Date: 08/30/2017
Firm Name: OLSA RESOURCES INC
Attention: Dina
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Contractor/Checker

Description:
Engineering Contractor/Checker

Location: Savannah, GA
Pay Rate: $50/hr - $55/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Review 3D engineering data for conformance to Company requirements as directed.
-Check parts for fit, form and function to the extent that information is available.
-Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed.
-Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding Company drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of Company parts list & PdocM, a plus.
• Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.
• Knowledge of Excel, Share Point software, Microsoft Office a plus

Job Description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 7680
Job Location: Savannah, GA
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/25/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Design Checker - Level 2 with Active Secret / Catia FL

Description:
160024
Requirement #MFC-REQ-1450
Work Location Orlando, FL
Work Week 9/80-A
Priority High
Needed Date 09/11/2017
End Date 09/07/2018
Number of Resources 3
Security Clearance Active Secret

Title: Engineering Design Checker - Level 2

Description
Examines engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation. Work with Mechanical Engineering Lead to assist in the mechanical design, engineering documentation, trade studies, and drawing release for the System. Verify tolerance analysis on system components has been performed. Work with designers to ensure the design meets all requirements, including Safety of Flight.

Skill/Experience/Education
Mandatory:

BS degree in Mechanical Engineering, or equivalent related education and experience. Experience with all aspects of mechanical design, including layout, documentation and checking per IAW ASME Y14.24 and be familiar with MIL-T-3100 and MIL-STD-100. 5 to 10 years’ experience of creating Pro-E / CATIA drawings and drawing release. Proficiency with said CAD skills is required. Knowledge of LMC drawing release procedures is desired. Previous LMC experience is a plus.



Max Pay Rate 65.00 USD

Shift 1st Shift
OT Allowed No
Travel No
Non-Exempt
 
Job Number: JE-1450
Job Location: Orlando, FL
Rate: 65/hr max
Duration: 12 month contract
Input Date: 09/11/2017
Last Updated: 10/03/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Specialist / Control Systems – Level III

Description:
Location: Huntsville, AL
Rate: $40.00 - $47.00/HR
Duration: 1 year contract


** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Job Overview:
Without appreciable direction, performs control system engineering assignments requiring a broad understanding of controls engineering principles and a working knowledge of other related disciplines to analyze rocket propulsion system and component performance.

Responsibilities:
60% - Use system simulation software tools including custom software applications in Matlab/Simulink and C++ computer language to evaluate control system performance. Apply advanced techniques and extension of theories, precepts, and closed loop control theory and related sciences to predict system stability and transient/steady state performance of rocket propulsion systems. Support material review boards to develop exoneration paths for non-conforming hardware used in flight systems. Plans, conducts, and directs development of software applications and a wide range of math models using several programming languages (Fortran, C/C++, VisualBasic, etc.) and other software, using advanced techniques in controls engineering to optimize propulsion systems.

30% - Support solid rocket motor development and verification testing through test setup, conduct, and data reduction. Assesses feasibility of proposed products, testing and analyses and reviews results of other team members for technical accuracy.

10% - Documents work in reports and presentations, and presents results to large diverse audiences that include customer and industry technical experts. Reviews work of peers and less experienced engineers.

Skills:
-Rocket propulsion industry technical experience preferred, especially with control systems.
-Experience with Matlab/Simulink.

Education:
-Bachelor's Degree in Electrical or Mechanical Engineering or appropriate controls related discipline/science and nine years of directly related industry experience required (or equivalent combination of education and experience).
-Advanced degree preferred.
-Coursework and experience in propulsion systems and linear/digital controls required.
 
Job Number: 7753
Job Location: Huntsville, AL
Rate: $40.00 - $47.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 08/25/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Specialist / Control Systems – Level III

Description:
Location: Sacramento, CA
Rate: $40.00 - $47.00/HR
Duration: 1 year contract


** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Job Overview:
Without appreciable direction, performs control system engineering assignments requiring a broad understanding of controls engineering principles and a working knowledge of other related disciplines to analyze rocket propulsion system and component performance.

Responsibilities:
60% - Use system simulation software tools including custom software applications in Matlab/Simulink and C++ computer language to evaluate control system performance. Apply advanced techniques and extension of theories, precepts, and closed loop control theory and related sciences to predict system stability and transient/steady state performance of rocket propulsion systems. Support material review boards to develop exoneration paths for non-conforming hardware used in flight systems. Plans, conducts, and directs development of software applications and a wide range of math models using several programming languages (Fortran, C/C++, VisualBasic, etc.) and other software, using advanced techniques in controls engineering to optimize propulsion systems.

30% - Support solid rocket motor development and verification testing through test setup, conduct, and data reduction. Assesses feasibility of proposed products, testing and analyses and reviews results of other team members for technical accuracy.

10% - Documents work in reports and presentations, and presents results to large diverse audiences that include customer and industry technical experts. Reviews work of peers and less experienced engineers.

Skills:
-Rocket propulsion industry technical experience preferred, especially with control systems.
-Experience with Matlab/Simulink.

Education:
-Bachelor's Degree in Electrical or Mechanical Engineering or appropriate controls related discipline/science and nine years of directly related industry experience required (or equivalent combination of education and experience).
-Advanced degree preferred.
-Coursework and experience in propulsion systems and linear/digital controls required.
 
Job Number: 7752
Job Location: Sacramento, CA
Rate: $40.00 - $47.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 08/25/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician 4 Computer Aided Metrology

Description:
Work Schedule: 4/10 - (2nd shift)

Engineering Technician 4 Computer Aided Metrology.

We are looking for highly motivated individuals that are willing to work in a fast paced manufacturing environment covering multiple programs. Candidate will be required to use highly sophisticated computer aided metrology equipment that will require knowledge of multiple software applications. Candidate will have responsibility for overseeing lesser skilled employees assisting them with their training and development in the computer aided metrology field.

Basic Qualifications:

High School Diploma/GED plus 10 years of experience.

Position requires Assembly Tooling and or composite tooling background with assorted Computer-Aided Measurement Systems (C.A.M.S.) and an emphasis on (FARO-LEICA-API) Laser Tracking Interferometer or non-Interferometer Systems (minimum 10 years). Experience in data collection for the Validation/Verification of Tooling and Engineering. This position requires experience working with Manufacturing Engineering developing solutions to highly complex mechanical problems. Also working with Engineering for dispositions and best methodology to make repairs. Analyze and advise on data results. Must be proficient in Microsoft suite. Ability to work on high ladders and portable platforms, heavy lifting as well as standing for long periods of time. Candidate may be required to work any shift as well as overtime as necessary. High school diploma or equivalent required. Working knowledge of Photogrammetric laser radar systems and laser scanning systems and articulating arms. Theodolite systems are also required. Computer aided graphic interfaces such as Verisurf X, SA and Maya matrix Build!IT and Polyworks.

Preferred Qualifications:

Familiar with multiple computer aided metrology systems such as laser trackers, articulated arms, scanners, projection lasers etc. Experience and background in design of tools and assemblies is also very much desired. Experience in 3D modeling systems such as Catia UG is a plus. Preferred experience and the ability to analyze collected data to computer models using CATIA V5 R22 or later. Assist in the assignment of personnel to support all Aerospace Systems computer aided measurement tasks. Advise and Train personnel in the usage of C.A.M.S. with O.J.T in addition to classroom time and assist in the certification testing. Implement Lean Thinking in the operations and documentation of C.A.M.S. Experience in reverse engineering and model building from collected data.
 
Job Number: 1614
Job Location: Palmdale, CA
Rate: DOE
Duration: 12 Months
Input Date: 08/21/2017
Last Updated: 09/25/2017
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
External Loads Engineer

Description:
External Loads Engineer
Contract duration: 9+ months
Location: Greensboro, NC
RAte: Open, DOE

Desired Skills
C++;LINUX;UNIX;NASTRAN;PATRAN;FORTRAN;External Loads Engineer

Job Description 
External Loads and Dynamics Engneer
 
General Summary: 
 
Responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.
 
Duties and Responsibilities:
Applicant will define and validate aircraft flight and ground loads through simulation/calculation using established theory and methods.
 
Qualifications
 
Education, Work Experience, Certification and/or Licensure:
BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
Applicant shall possess a minimum of 6 years’ experience in aircraft external Loads analysis with preferably 10 years’ experience, including static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements.  Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable
Knowledge of, and experience with, dynamic aeroelastic analysis is desirable
Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable  
Strong knowledge of CFD principles and CFD-based modeling , along with wind tunnel test data usage for Loads analysis, is required
Proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required
Knowledge of mass properties principles as they relate to loads analysis required.
Knowledge and experience with cable-driven / mass-balanced flight control systems required
Experience with flight test data analysis related to structural design loads substantiation, as well as a demonstrated ability or experience with development of computational methods relating to loads analysis
 
 
 
 
 
 The Structures Company is an AA/EOE.
 
 
Notes
US Citizen, Or Greencard holder.
401K
6 paid holidays
Annual bonus
 
Job Location: Greensboro, NC
Per Diem: yes
Overtime: possible
Duration: 9+ months
Start Date: asap
Input Date: 09/13/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

External Loads Engineer

Description:
Responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.

Duties and Responsibilities:
Applicant must be able to define and validate aircraft flight and ground loads through simulation/calculation using established theory and methods.

Education, Work Experience, Certification and/or Licensure:
1. BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
2. Applicant shall possess a minimum of 6 years’ experience in aircraft external Loads analysis with preferably 10 years’ experience
3. Excellent communication skills both written and verbal
4. Experience and demonstrated proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required. Python experience and/or proficiency is desirable.

Knowledge, Skills and Abilities:
1. Knowledge of static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements. Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable.
2. Knowledge of, and experience with, FAA FAR 23 and EASA CS 23 Loads regulatory requirements and means of compliance is required, and experience with FAA FAR 25 and EASA CS 25 Loads regulatory requirements and means of compliance is desirable.
3. Must be proficient in generating documentation to support certification efforts related to external loads.
4. Knowledge of, and experience with, dynamic aeroelastic analysis is desirable. Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable.
5. Strong knowledge of CFD principles and CFD-based modeling, along with wind tunnel test data usage for Loads analysis, is required. Applicant must be able to communicate aerodynamic, structures and systems discipline input needs to ensure accurate load set development and conveyance.
 
Job Number: 28-031
Job Location: Greensboro, NC
Rate: $70-$75/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 09/19/2018
Last Updated: 09/24/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Final Phase-Mechanical/Interiors Design Engineer

Description:
Final Phase-Mechanical/Interiors Design Engineer
Savannah, GA
Rate: $58-$63
Unique Skills:

Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Final Phase Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -

Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.

Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.

Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.


4X10
 
Job Number: 7675
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/25/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Finite Element Analysis (FEA) / Finite Element Method (FEM) Mechanical Engineer - Level 3 with active secret FL

Description:
1286
Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3
Orlando FL
Active secret required
75/hr max
12 month contract

Description
Mechanical Structures / Dynamics Engineer: Perform stress analysis for flight structures and ground test support equipment’s. Course work and stress analysis experience must include classical hand analysis as well as finite element analysis methods. Job duties may encompass buckling analysis; linear and non-linear stress analysis; composite analysis and mechanism. Candidate should be highly skilled in finite element modeling and analysis, with expertise in the use of FEM, Nastran, NX or BETACAE preferred. Experience with high velocity impact analysis or flight test random vibration data reduction is a plus. Requires good verbal and written communication skills, and ability to work in a team environment. Candidate will be required to support designers in determining parts with adequate margins of safety, good load paths, low weight, and high producibility. Job duties may also require support to structural test definition, requirements, monitoring, data reduction, and comparison to analysis.

Skill/Experience/Education

Mandatory:

Bachelor’s degree from and accredited college in a related discipline, or equivalent experience/combined education, with 8 years of professional experience; or 6 years’ experience with a related Master’s degree.

Desired:

Mechanical Engineering degree, FEM, NASTRAN, NX or BETCAE skills
PRO E and/or CATIA skills
 
Job Number: JE-1286
Job Location: Orlando, FL
Rate: 75/hr max
Duration: 12 month contract
Input Date: 10/17/2017
Last Updated: 10/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

Description:
Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

Location: Orlando, FL
Duration: 1 year contract
Pay Rate: $65/hr - $75/hr (DOE)
Shift: 1st, 9/80
**Must have an Active Secret Clearance**


Job Description:
-Mechanical Structures / Dynamics Engineer: Perform stress analysis for flight structures and ground test support equipment’s.
-Course work and stress analysis experience must include classical hand analysis as well as finite element analysis methods.
-Job duties may encompass buckling analysis; linear and non-linear stress analysis; composite analysis and mechanism.
-Candidate should be highly skilled in finite element modeling and analysis, with expertise in the use of FEM, Nastran, NX or BETACAE preferred.
-Experience with high velocity impact analysis or flight test random vibration data reduction is a plus.
-Requires good verbal and written communication skills, and ability to work in a team environment.
-Candidate will be required to support designers in determining parts with adequate margins of safety, good load paths, low weight, and high producibility.
-Job duties may also require support to structural test definition, requirements, monitoring, data reduction, and comparison to analysis.


Mandatory Skills:
-Bachelor’s degree from and accredited college in a related discipline, or equivalent experience/combined education, with 8 years of professional experience; or 6 years’ experience with a related Master’s degree.


Desired Skills:
-Mechanical Engineering degree, FEM, NASTRAN, NX or BETCAE skills
-PRO E and/or CATIA skills
 
Job Number: 7019
Job Location: Orlando, FL
Rate: 65.00-75.00
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 01/31/2017
Last Updated: 12/20/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls Systems Engineer

Description:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Flight Control Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies for Flight Control Systems to identify optimal engineering solution.
3. Define primary and secondary Flight Control System schematics and architecture
4. Develop component level requirements derived from top level system requirements
5. Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture
6. Perform kinematic studies and system performance analysis for powered and unpowered Flight Control Systems
7. Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
8. Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination, and timely completion of project milestones.

Education, Work Experience, Certification and/or Licensure:
1. BS in Mechanical Engineering with 10-15 years directly related experience
a. OR MS / MBA with 8-13 years of experience
b. OR 18-23 years directly related experience
2. Some Travel will be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Proficient in use of Kinematic function within CATIA Version 5.
3. Advanced knowledge of drafting rules.
4. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
5. Proficient in Microsoft Office Products.
6. Use of Team Center.
 
Job Number: 28-013
Job Location: Greensboro, NC
Rate: $62-75/hr May pay more DOE
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 10/30/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Sciences

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.

Seeking multiple contract or fulltime Flight Sciences Engineers to join the teams in Seattle and Moses Lake with at least five years� experience in flight sciences, including:
- Stability & Control
- Aircraft Performance
- 6DOF Flight Simulation

Essential functions:
� Define and validate flight test specifications
� Perform data review and analysis for verification of aircraft level requirements
� Utilize flight simulation models and data
� Support ground and flight test activities
� Prepare flight test reports

Desired Qualifications:
� Flight Sciences Engineer with experience with FAA Part 25 or Part 23 aircraft certification
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor or advanced degree in Aerospace Engineering.

If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Seattle, WA
Per Diem: possible
Overtime: Yes
Duration: lt
Start Date: asap
Input Date: 09/09/2017
Last Updated: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Controls -

Description:
Johnson Service Group is seeking a Flight Test Controls for a 15 month contract in West Palm Beach, FL!

The applicant will need to work in West Palm Beach, FL for the first four to six months of the assignment in order to become familiar with the aircraft and the test requirements. The applicant will then likely be expected to move to Patuxent River, MD as the program shifts testing to be conducted from there.

Description:

Plan, conduct, manage and report flight control systems and handling qualities flight tests.
Test planning function involves determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
These details are written into published test plans. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
Large volumes of gathered flight data are processed, analyzed, and reported. These results are written into published test reports.
Work closely with the handling qualities and flight controls design engineers to become familiar with the flight control system hardware components and software, specifically control law design. Quickly identify problems on the test aircraft, troubleshoot the issue, and work with design engineering to implement a solution.
Utilize Mat lab to analyze flight test data and work with control laws.
Fly on board experimental aircraft to conduct test flights, modify software flight test variables, and collect data.
Experience:

Minimum of a Bachelor's degree in Aerospace Engineering, Mechanical or Electrical Engineering. Master’s degree a plus.
Minimum of 4 years of fixed/rotary wing flight control systems and handling qualities flight test engineering experience.
Fly-By-Wire experience preferred. Analytical thinking, troubleshooting, problem solving, and communication--written and oral. Technical writing.
Matlab/Simulink, Microsoft Office applications. General aviation knowledge; pilot license is preferred.


Additional Notes

The job involves significant teamwork and coordination with flight test co-workers in a variety of disciplines (pilots, mechanics, inspectors, instrumentation and data technicians), qualification or certification authority representatives and subject matter expert design engineers. The applicant will also team with design engineering by participating in simulation testing. Good interpersonal skills are imperative. Personal flexibility is required to occasionally support unusual working hours.
 
Job Number: 356488
Job Location: West Palm Beach, FL
Rate: $39hr
Per Diem: yes
Overtime: possible
Duration: 15 months
Start Date: asap
Input Date: 08/04/2017
Last Updated: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

Essential Functions:
Coordinate test and certification requirements.
Author flight test and ground test plans including test hazard analysis.
Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
Support instrumentation installation as required.
Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
Support flight and ground test conduct and data collection.
Analyze test data and evaluate compliance with regulations.
Prepare certification test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 11/30/2017
Last Updated: 12/07/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Flight Test Engineer

Location: Savannah, GA
Pay Rate: $56/hr - $67/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Experience either conducting, functioning as an on board flight analyst, or telemetry during experimental fixed wing aircraft flight testing in any of the following fields: Avionics, Powerplant/Mechanical Systems, Performance/Stability & Control.
-Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan.
-Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6952
Job Location: Savannah, CA
Rate: 56-67
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/12/2017
Last Updated: 10/03/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineers

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
This position will be in the Test and Evaluation Support unit, which has four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

The Instrumentation Engineer is responsible for supporting the operational and technical success of the instrumentation group. This person works closely with all other Instrumentation Engineers, Technicians, other T&E Support Staff to meet instrumentation requirements.

Job Duties and Responsibilities (Essential Functions):

� Provide instrumentation services: to include:
o production of instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
o Ensuring that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
o Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
� Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs. Works closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.
� Support Program Teams: Works with OEM & STC program and project managers with technical resources requirements. Fully supports the test planners in regards to their instrumentation needs.


Knowledge/Skills/Abilities:
� Intermediate knowledge skills and competency of Flight Test Instrumentation (FTI) and data equipment for the purpose of recording and monitoring parameters fitted to experimental aircraft including associated of industry processes and practices to include:
o Electrical and avionics design,
o Data Systems Design Principles
o Telemetry
o Air data booms (straight nose and swivel-head)
o Static trailing cones
o Sensitive aircraft instruments
o Cockpit displays
o End-user interface
o Portable test equipment such as hand-held stick force gauges
o High-end GPS receivers and antennas for precise aircraft positioning
o Position transducers - sting potentiometers, rotary potentiometers, LVDTs, RVDTs
o Pressure transducers
o Flowmeters
o Temperature sensors - thermocouple wire/probes/assemblies, RTD probes, thermistors, glass bulb thermometers
o Strain gauges, load cells, force transducers, torque sensors
o Portable weather stations - wind speed/direction, outside air temperature, relative humidity
o Video recording equipment
o Signal conditioners
o Data acquisition systems and data loggers
� Intermediate knowledge of flight test operations and flight certification.

Level Requirements (Minimum):
Education
� Formal Instrumentation Training (Military or Civilian) � Preferred
� BS in Engineering or equivalent experience

Experience
� 5+ years relevant technical experience
� Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.
 
Job Number: #301-Flight Test Instrumentation
Job Location: Moses Lake, WA - Washington
Rate: Open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: ASAP
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Mechanical Design Engineer

Description:
The Flight Test Mechanical Design Engineer will be responsible for reviewing defects, establish root causes and providing dispositions to repair the discrepant condition using engineering best practices. - Ensuring that the proposed repair is equivalent to the Blueprint design and that it will not affect system functionality. - Acting as the single point of contact for Mechanical Design and Flight Test MRB to supports Operations during the weekend shift to maintain aircraft availability. The following qualifications are required for this role: - Strong working knowledge of Flight Test Instrumentation Mechanical Design. - Strong working knowledge of Flight Test Aircraft Systems. - Working knowledge of CATIA V5, SmarTeam and Solumina. - Must be able to work the weekend shift (4/10 schedules Friday - Monday).

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/22/2017
Last Updated: 09/15/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
HYDRAULIC/MECH. FLT CONTROLS -

Description:
HYDRAULIC/MECH. FLT CONTROLS

15 MONTHS CONTRACT

STRATFORD, CT

Description:

Provide administrative support to the Hydraulics and Mechanical Controls team on the 53K program.
Responsibilities include developing design change notices, supporting engineer change requests, and tracking engineering design changes through the entire release process.
Responsibilities also include supporting supplier managers and cost account manager utilizing the COMPANY EV system.
 
Job Number: 358686
Job Location: Stratford, CT
Rate: $37hr
Per Diem: yes
Overtime: possible
Duration: 15 months
Start Date: asap
Input Date: 09/26/2017
Last Updated: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Inspector - Fabrication/Assembly (KS)

Description:
Responsible for a wide range of inspection functions supporting materials, sheet metal, composites, process and assembly operations. Follow programs, documents, drawings, specifications and quality standards to perform inspection functions. Perform audit/surveillance/measurement/inspection of all sheet metal/composite parts/assemblies according to specifications, processes and procedures. Initiate and document any non-conforming materials, parts, assemblies or portions thereof, according to specification, process and procedures.

1. Use and interpret drawings, inspection manuals and specifications, shop mathematics precision measuring instruments, specialized inspection machines, tools and equipment necessary to accomplish work assignments.

2. Experience working with Quality Management System Policies and Procedures.

3. Working knowledge of Company Policies, Procedures and Specifications.

4. Overall working knowledge of production processes.

5. Contact other company organizations or customer representatives, as required to coordinate and accomplish work assignments.

6. Good communication skills – written and verbal.

7. Good computing skills.

8. Operate testing machines, calculate and record results.

9. Maintain certifications as required.

10. Plan own sequence of operations.

11. Follow Inspection (shop) procedures to accept or reject processes/parts/assemblies.

12. Verify that tools are qualified.

13. Prepare and maintain Quality records.

14. Work across equivalent or lower level Inspector job codes as required.

15. Cross-train in equivalent level Assembly, Composite, Metals, Process and Systems/Payload Structures Mechanic classifications
Requirements:Inspectors are needed to complete work that has traveled out of position on the 737 line in Wichita.

Shift: primarily 2nd
OT: Yes
Local talent and not offering a Per Diem at this time
Onsite interviews will be conducted
 
Job Number: FD-538478KS
Job Location: Wichita, KS
Rate: $33.00/HR
Per Diem: No - Local Talent Only
Overtime: Yes
Duration: 3 Months
Start Date: ASAP
Input Date: 10/04/2017
Last Updated: 10/05/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrumentation Lab Technician -

Description:
Instrumentation Lab Technician

Duration: 12 month contract

Location: Stratford, CT



Job Description:

Work from Engineering Requests, Procedures and Drawings with limited guidance; to Fabricate, Install, Check-out, Diagnose, and Trouble-Shoot Instrumentation Data Acquisition Systems and Sensors in support of Ground and Flight Test Programs.
Must be able to accomplish the planning, build up and termination of cable harnesses associated with Instrumentation Systems.
Must be able to assist in performing system calibrations and check outs with the Test Engineer. Must be able to support Sensor calibrations Experienced Instrumentation Technician in both Rotary Wing Structural Ground and Flight Test.
Should possess a strong Mechanical and Electrical background familiar with Strain Gages and their circuitry , thermocouples, linear displacement and vibration transducers, measurement systems, instrumentation wiring and documentation
 
Job Number: 357321
Job Location: Stratford, CT
Rate: $45hr
Per Diem: yes
Overtime: possible
Duration: 12 months
Start Date: asap
Input Date: 09/20/2017
Last Updated: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Mechanics

Description:
Currently hiring Lead Mechanics for on of the TOP MRO facilities located in Kansas City, Missouri.

Lead Roles Open:
Systems Mechanic
Interior
A&P
Composite
Structures

A&P Required for all lead roles. 3- 5 years experience in an MRO facility. Commercial aircraft background.
 
Job Location: Kansas City, MO
Input Date: 10/03/2017
Firm Name: APA SERVICES
Attention: Kami M Muehlberger
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Loads & Dynamics Analysis Support

Description:
Candidate will provide loads and dynamics analysis support for the SLS program launch and space vehicle hardware. Providing expertise on loads and dynamics of launch vehicles and spacecraft, including finite element and hand calculations and the determination of mode shapes, frequencies, stresses and deflections caused by transient loads, thermal conditioning and environments, random vibration and static loading conditions. Translating loads and dynamic criteria to requirement verification closure statements.

Required: B.S. degree and 25 years previous experience on NASA and/or Launch Vehicle design and analysis. M.S degree and 20 years previous experience on NASA and/or Launch Vehicle design and analysis. Minimum of 20 plus years’ experience in aerospace loads and dynamics analysis. Experience in launch vehicle analysis of pre-launch, liftoff and ascent flight mechanics analysis as it relates to loads and dynamic analysis.

NASA and/or Launch Vehicle design and analysis experience REQUIRED.

Desired: SLS experience preferred.
review all current openings at www.hi-tecsolutions.com/jobs
 
Job Number: 213
Job Location: Huntsville, AL
Rate: 75.00
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: asap
Input Date: 09/19/2017
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: 2501 E PIEDMONT RD STE 103
City, State: MARIETTA, GA 30062-7753
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MM-System Engineering DMSMS–Grade 04

Description:
EDUCATION
BS, Electrical/Mechanical Engineering
MS, Electrical/Mechanical Engineering

Experience as design/ component engineer with semiconductor industry, an electrical component engineer with an Avionics OEM (Original Equipment Manufacturer), or as a DMSMS (Diminishing Manufacturing Sources and Material Shortages)/Obsolescence Technical Engineer.

Provide design guidance to engineering/suppliers for use of preferred parts to minimize impact from DMSMS

Review new designs and propose replacement options for both electrical and mechanical component selections based on cost, volume, DMSMS, reliability, quality and availability.
Interface with equipment manufacturers and LRU suppliers to clarify parts support, availability and recommended resolutions.

Manage component lifecycle and Bill of Material grading through DMSMS forecast tool [e.g. Silicon Expert, IHS, Q-Star, etc.] to identify, forecast, and resolve obsolete component issues.
Investigate and close DMSMS issues from engineering, production, and/or fielded parts.
Identify and analyze critical parts and recommend resolutions for proactive monitoring efforts.

Develop processes and lead working group meetings to track status and action items for a given design or manufacturing issues regarding; DMSMS, failure analysis, corrective actions, and root cause analysis.
Measure and track internal metrics to ensure DMSMS processes are being followed and implemented.
 
Job Number: 17-699-1616
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer 3- Multiple Positions & Shifts Times

Description:
MP&P Engineer 3- Multiple Positions & Shift Times

Location: New Orleans, LA
Duration: 12+ months

Position 1st Shift: Saturday, and Sunday (12 hours each day), OR Saturday, Sunday and Monday. (12 hours each day). A 4 X 10 hour schedule may also be considered which spans the weekend. **

Position 2nd Shift: This position is for 2nd Shift Work Schedule, Monday – Friday X 8 Hrs / Day.
Also, Saturday, and Sunday (12 hours each day), OR Saturday, Sunday and Monday. (12 hours each day). A 4 X 10 hour schedule may also be considered which spans the weekend. **

Position 3rd Shift: (Sunday – Thursday) X 8 Hr / Day 3rd shift position


Job Description:
This position is for a Materials, Processes and Physics Engineer Level 3 supporting the SLS program in New Orleans, Louisiana performing engineering and technical activities. The engineer will develop and execute plans to ensure business, technical, and customer requirements are achieved. The team will be responsible for activities including
development and implementation of SLS specific processes, NASA-6016 requirements, review supporting engineering documents, support supplier surveys and technical interchange meetings, provide liaison engineering support, and support material selection for subsystem /end item design concepts, coordination of MUIL/MUA. MRB Experience considered a Plus.

Qualifications Required:
Experience in a Materials, Process & Physics.
Experience in contamination control, mechanical assembly, welding, orbital tube welding, adhesives, sealants, Thermal
Protection Systems, wire harness routing and troubleshooting, metallurgy a plus.
Candidates for this position will require the ability to obtain badging for NASA facility.
This is a sensitive safety position subject to NASA, requiring random drug testing.

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 17-14631
Job Location: New Orleans, LA
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: 12 months
Start Date: Asap
Input Date: 08/18/2017
Last Updated: 09/22/2017
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer IV - (AL) - ACTIVE SECRET CLEARANCE

Description:
ACTIVE SECRET CLEARANCE REQUIRED TO START.

The Strategic Missile & Information Systems Parts Materials & Processes (PM&P) team is a Specialty Engineering function which provides expertise in EEE, mechanical, metallic and non-metallic parts, materials and related processes as well as survivability. The PM&P subject matter experts are responsible for working with program designers, IPTs and subcontractors to select parts, materials and processes that meet program designated PM&P requirements along with supporting part testing, failure analysis and mitigation development as well as performing supplier compliance assessments and development of all required plans. Additionally, the subject matter experts will support all Parts, Materials, & Processes Control Board (PMPCB) related functions including reviewing of Non-Standard Part Approval Requests and relevant data, PMPCB working groups and board meetings and interfacing with both the customer and subcontractors in support of the PMPCB.

Field of expertise must be electrical engineering, materials science and/or engineering, physics or equivalent. Applicants must have prior knowledge of military and industry parts and materials specifications, bills of materials, obsolescence, and have coordinated activities with suppliers.

It is desired that applicants have prior experience working with defense contractors, parts, materials, & processes mission assurance plans. Some working knowledge of ionizing radiation effects and testing is also preferred.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

We also have full Medical/Dental, Life, Vision, and 401k.
 
Job Number: MP&Pal
Job Location: Huntsville, AL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 06/20/2017
Last Updated: 10/13/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintainability Engineer III

Description:
1) Maintainability Predictions in accordance with MIL-HDBK-472, and 2) Maintainability Analysis Reports to include conducting maintenance studies using MIL-HDBK-470A criteria to assess impact to Accessibility, Human Factors, Preventive Maintenance as a result of aircraft modifications. Catia skills highly desirable.

Principal Duties and Responsibilities
1. Coordinate and conduct maintenance program development activities in support of the scheduled maintenance program for existing or future aircraft programs maintenance tasks, maintenance skills, manning and documentation procedures, including off-sight presentations/meetings.
2. Evaluate fleet data to determine the feasibility of incorporating mechanical, materials, and/or procedural advancements that improve aircraft availability or the technicians ability to perform scheduled or corrective maintenance.
3. Evaluate methods that lead to the reduction of expended task man-hours and needed support equipment to affect maximum aircraft availability with minimum maintenance resources.
4. Utilize departmental, company, and industry resources to the maximum in developing maintenance practices for aircraft.
5. Coordinate the evaluation of current maintenance practices or suggestions to determine their feasibility/practicality for application to the fleet. Present Maintenance Program changes to the Customer based boards for review, acceptance and application to fleet inspection schedules.
6. Maintain liaison with maintainability/logistics groups, within the aircraft and aerospace industry, to stay abreast of new developments, component designs, and processes that may be applicable to maintainability functions and directly benefit scheduled maintenance programs.
7. Must independently exercise self-policing practices to ensure timely, effective follow-through and close-out of assigned tasks. Inform cognizant individuals of obstacles that hinder a successful conclusion.
8. Coordinate and lead major project activities. Review work of team members for technical and grammatical accuracy.
9. Perform dispatch reliability and aircraft availability information review and calculations.
10. Represent Maintainability Engineering in dealing with Regulatory bodies and officials.

Other Requirements:
1. Knowledge of aircraft inspection programs, Federal Aviation Regulations, aircraft systems and technical manuals including maintenance record systems required.
2. Proficient knowledge of MSG-3 Maintenance Program Development process.

Experience/Education Required
Bachelors degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience. A&P license preferred.

Seven years of related aircraft maintenance and operational experience required or equivalent aircraft experience.
 
Job Number: 24-186
Job Location: Savannah, GA
Rate: $62 to $67/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 11/07/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Our client seeking a 1st Shift Manufacturing Engineer to work on a contractual basis evaluating products and processes. The successful candidate will interface among designers, process improvement teams, quality control, field engineers, and production personnel.

Principal Duties and Responsibilities:

• Conduct projects and studies involving process or product improvements, process control and the analysis of technical problems with limited supervision and guidance.
• Evaluate the manufacturability of parts and assemblies and suggest improvements.
• Develop and document production and assembly processes and test procedures.
• Provide training and technical support to hourly personnel for new processes.
• Analyze and refine existing processes that do not consistently yield acceptable results.
• Analyze discrepant parts or units as required to determine whether a process problem exists.
• May participate on various teams for design review, configuration control, process improvement, etc., as assigned.
• Estimate production or rework labor for parts or assemblies.
• Performs all operations according to prescribed safety principles.
• All other related duties as assigned.

Required Qualifications:
• Bachelor of Science in Mechanical, Manufacturing, or Aeronautical Engineering, or a related discipline.
• 2+ years’ manufacturing/production engineering experience.
• Ability to conduct root-cause problem analysis and to develop appropriate corrective and preventive action.
• Ability to make independent judgments on technical issues.
• Ability to lift 25 lbs. occasionally, and work in an office, lab, shop floor, and indoor industrial environment.

Desired Qualifications:
• Familiarity with common aerospace sheet-metal fabrication and assembly processes.
• Working knowledge of Geometric Dimensioning & Tolerance.
• Practical experience with blueprint reading.
 
Job Location: Davenport, IA
Rate: Open
Per Diem: Yes, Split
Overtime: Possible
Duration: 6-12 Months
Start Date: ASAP
Input Date: 09/13/2017
Firm Name: AMERICAN CONTRACT GROUP
Attention: Derek Doucette
Address: 50 HIGH ST STE 46
City, State: NORTH ANDOVER, MA 01845
Phone: 978/984-5581
800 Phone: 877/723-9087
Fax Phone: 978/208-8246
Website: www.americancontractgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Location: Decatur, AL
Rate: $35.00 - $50.00/HR (DOE)
Duration: 6 month contract (possible extension)
Overtime: Exempt

Job Description:
- Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.
- Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.
- Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
- Adapts machine or equipment design to factory and production conditions.
- May incorporate inspection and test requirements into the production plan.
- Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.
- Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
- Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
- Ensures processes and procedures are in compliance with regulations.


Basic Requirements:
- Bachelor’s degree in Manufacturing, Mechanical or Aerospace Engineering
- Proficiency with Microsoft Office Applications (Excel, Word, PowerPoint, Project)
- Good oral and written skills


Preferred Qualifications:
- Exposure to CNC machining practices
- Training or experience developing and maintaining a manufacturing bill of materials
- Training or experience designing the arrangement of build fixtures and machines within plant facilities to ensure efficient and productive layout
- Knowledge of tool and equipment fabrication
 
Job Number: 7862
Job Location: Decatur, AL
Rate: $35.00 - $50.00/HR (DOE)
Per Diem: Split Possible
Overtime: No/Exempt
Duration: 6 mos
Input Date: 09/11/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Role: Manufacturing Engineer
Location: Cincinnati, OH 45242
Duration: 4 - 6+ months contract

Job Description:
Performs a variety of engineering work in planning, design and modification of fixtures, tools, and manufacturing processes. Resolves production problems and completes documentation on assigned parts. Interfaces with customers as needed. Generally, operates with appreciable latitude for non-reviewed action or decision-making. Has average to above-average knowledge and understanding of Electro-Chemical Machining (ECM) technologies and processes.
• Determines the sequence of operations in the manufacture of parts.
• Prepares and updates routers and operation sheets.
• Researches new manufacturing methods.
• Establishes manufacturing standards.
• Determines and troubleshoots manufacturing processes at all levels of complexity.
• Engineers tools, fixture and gauging modifications.
• Gives technical direction to CAD/CAM, production and inspection personnel as needed.
• Coordinates part inspection procedures with Quality Engineers.
• Addresses and documents cause and corrective action issues to prevent future problem occurrences.
• Interfaces with customers concerning design problems, part prints, etc.
• Performs other duties as assigned by management.

Requirements
• Bachelor’s Degree in mechanical engineering, manufacturing engineering, or equivalent experience and training.
• Minimum of 3 years’ experience (4-7 is preferred) as a Manufacturing Engineer II or the equivalent engineering experience in jet engine manufacturing processes, materials, and designs.
• Thorough knowledge of aerospace manufacturing and quality requirements.
• Average to above-average knowledge and understanding of ECM technologies and processes.
• Demonstrated ability to set up and operate ECM equipment.
• Proficient in the use of word processing, spreadsheet, and data base computer software (i.e. Word, Excel).
• Good interpersonal and communication skills.
 
Job Number: 52291
Job Location: Cincinnati, OH
Rate: open
Per Diem: Yes
Overtime: NO
Duration: 6+ months
Start Date: ASAP
Input Date: 09/11/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Arun
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 1

Description:
Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Duration: 1 year contract

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or to have had one with the last two (2) years**

Job Description:
- Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.
- Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.
- Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
- Adapts machine or equipment design to factory and production conditions.
- May incorporate inspection and test requirements into the production plan.
- Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.
- Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
- Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
- Ensures processes and procedures are in compliance with regulations.

Skill/Experience/Education
Mandatory:
- Mechanical, Electrical, Aerospace Engineering Degree.
- 1st, 2nd or 3rd shift schedules may be required.
- On-aircraft and off operations.
- In this role, the employee will review mechanical designs for ease of manufacturing and work closely with design engineering for improvements.
- The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions.
- This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists.
- The employee will work with manufacturing on issues and process improvements.
- Active Secret Security Clearance within the last 2 years.

Desired:
- Job scope experience
- Team Center Engineering experience
- Production Engineering experience
- Production Operations experience
- Mechanical Experience
- Electrical Experience
- Lean Six Sigma practices SOF CLSS contract, facility, and customer knowledge
- Ability to read and interpret engineering drawings
- Excellent verbal and written communications skills
 
Job Number: 7709
Job Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 08/02/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 4x10


Unique Skills:
Catia / SAP / SOLUMINA / SmarTeam

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months (18) Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). 2. Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 3. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 4. Author DRDI/DMT rework instructions to support effective corrective actions. 5. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 6. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 7. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 8. Investigate and assist in preparing justification for equipment and facility requests. 9. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. 10. Participate in Design for Manufacturing assessments with Engineering. 11. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 12. Perform audit of co-workers output based on defined requirements and procedures. 13. Must demonstrate knowledge of ME policies and procedures. 14. Incorporate Lean Manufacturing Methodology into existing and future processes. 15. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 16. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 17. Support all Safety, Sustainability and Ergonomic Initiatives. 18. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7886
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 03/07/2018
Last Updated: 03/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
UNIQUE SKILLS
Solumina, CATIA and SAP preferred. Prefer prior experience on live aircraft and/or in environment of aircraft reconfiguration.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


POSITION PURPOSE
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. Author DRDI/DMT rework instructions to support effective corrective actions. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
8. Incorporate Lean Manufacturing Methodology into existing and future processes.
9. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
10. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
11. Support all Safety, Sustainability and Ergonomic Initiatives.
12. Aid in development and maintenance of Business Continuity Plan.

ADDITIONAL FUNCTIONS
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

OTHER REQUIREMENTS
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 17-752-105442
Job Location: Southeast
Rate: $55.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 02/28/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 4x10


Unique Skills:
SAP - SOLUMINA - CATIA REQUIRED


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7774
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 10/26/2017
Last Updated: 12/04/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Manufacturing Engineer II

Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
- Solumina, CATIA and SAP preferred. Prefer prior experience on live aircraft and/or in environment of aircraft reconfiguration.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7511
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 06/08/2017
Last Updated: 12/04/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Manufacturing Engineer II

Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 4x10


Unique Skills:
Required: SAP - Catia - Solumina

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7515
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 03/07/2018
Last Updated: 03/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Mechanic

Description:

Please send your resume directly to Joyce Branch jbranch@pdstech.com or call 843-277-6925
 Description:



  • Perform disassembly, clean, requalification, rework and assembly operations on Traction Motor Combo component utilizing manual equipment and automated equipment in accordance with manufacturing and quality procedures. 
  • Inspect work completed on components to internal inspection criteria for compliance to quality or engineering requirements. 
  • Responsible to perform work in a safe manor in support of lean manufacturing principals such as but not limited to 5s or single piece flow to required takt time. 
  • Operation of Overhead cranes. 
  • In some cases may have to perform special process such as welding or non-destructive testing which will require special process training or certification.


Responsibilities: 



  • Provide manufacturing support for manufacture or remanufacture of UX Traction Motor Combo components for the facility. 
  • Utilize manual and automated production equipment, various hydraulic or pneumatic tools for completion of responsibilities in accordance with in-house manufacturing and quality procedures to ensure all products meet specified requirements. 
  • Inspect work completed on components to internal inspection criteria for compliance to quality or engineering requirements utilizing fixtures, precision measuring devices and or testing protocols. 
  • Sign-off on the process documentation for each of the work steps performed. 
  • Required to process components in compliance with internal processing requirements.  
  • Required to perform work in compliance to all safety and EHS policies and procedures. 


Qualifications:  ·      



  • Knowledge of EHS procedures and policies
  • Knowledge of safe use manual equipment and hand tools for assigned product lines
  • Working knowledge of use of inspection measurement equipment  
  • Understanding of all manufacturing and quality procedures associating assigned product line in a lean manufacturing environment
  • Maintain acceptable defect rates  
  • Successful completion of training requirements
  • Where applicable, trained in special processes such as but not limited to welding or non-destructive testing


Training requirements:  ·      



  • Demonstrate ability to safely complete job tasks utilizing manual or automated equipment as well as use of gages needed for inspection or testing as required     ·      
  • Demonstrate ability to document and record inspection results per in-house procedures  
  • Successful completion of quality audit to internal procedures on assigned product line and/or use of equipment

Please send your resume directly to Joyce Branch jbranch@pdstech.com or call 843-277-6925
 
PDS Tech, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status.

 
 

 
Job Number: 1710066311
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 04/04/2017
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021ceoAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials, Process, and Physics Engineer

Description:
This position is for a Materials, Processes and Physics Engineer Level 3 supporting the SLS program in New Orleans, Louisiana performing engineering and technical activities. The engineer will develop and execute plans to ensure business, technical, and customer requirements are achieved. The team will be responsible for activities including development and implementation of SLS specific processes, NASA-6016 requirements, review supporting engineering documents, support supplier surveys and technical interchange meetings, provide liaison engineering support, and support material selection for subsystem / end item design concepts, coordination of MUIL/MUA. MRB Experience a Plus.

Qualifications Required:
Experience in a Materials, Process & Physics.
Experience in contamination control, mechanical assembly, welding, orbital tube welding, adhesives, sealants, Thermal Protection Systems, wire harness routing and troubleshooting, metallurgy a plus.

Additional information:
Candidates for this position will require the ability to obtain badging for NASA facility.
This is a sensitive safety position subject to NASA, requiring random drug testing.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Must be US Person for purposes of Export Compliance.

The following shifts are available:
1. This is a first shift weekend coverage shift. This position is for an Alternate Work Week Schedule for either Friday, Saturday, and Sunday (12 hours each day), OR Saturday, Sunday and Monday. (12 hours each day). A 4 X 10 hour schedule may also be considered which spans the weekend.
2. Alternate Work Schedule required - This is a second shift weekend coverage shift. This position is for an Alternate Work Week Schedule for either Friday, Saturday, and Sunday (12 hours each night/evening), OR Saturday, Sunday and Monday. (12 hours each night/evening).
3. A 4 X 10 hour schedule may also be considered which spans the weekend.
4. This position is for 2nd Shift Work Schedule, Monday – Friday X 8 Hrs / Day. Overtime may be required.
5. This position is for 3rd shift position (Sunday – Thursday) X 8 Hr / Day. Overtime may be required.
 
Job Number: 39240/39/38/37
Job Location: LA
Rate: open
Per Diem: split
Overtime: possible
Duration: 12 months
Start Date: asap
Input Date: 08/18/2017
Last Updated: 09/11/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

Mechanic

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610060095
Job Location: KS City, MO
Duration: 12 months
Input Date: 01/25/2017
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002FtZOAA0&URLSource=cjhunter

Mechanic Technician II

Description:
PDS Tech is seeking several mechanics for positions in Kansas City.
Must have steel toed shoes/boots; all assignments are one year in length
TWO - 1ST Shift KCR Remanufacturing Techs - Kansas City MO
 
 
 
Work may involve used mechanical parts. Aprons & Coveralls are available to contractors; must have steel toed shoes
  
 Operation of Overhead Cranes is involved in this job
Essential Functions / Responsibilities:*Perform disassembly, clean, requalification, rework and assembly operations on Traction Motor Combo component utilizing manual equipment and automated equipment in accordance with manufacturing and quality procedures. Inspect work completed on components to internal inspection criteria for compliance to quality or engineering requirements. Responsible to perform work in a safe manor in support of lean manufacturing principals such as but not limited to 5s or single piece flow to required takt time. In some cases may have to perform special process such as welding or non-destructive testing which will require special process training or certification. Operation of overhead cranes
Basic Qualifications / Requirements:*• Must have high school diploma or GED at a minimum
Knowledge of EHS procedures and policies
• Knowledge of safe use manual equipment and hand tools for assigned product lines.
• Working knowledge of use of inspection measurement equipment
• Understanding of all manufacturing and quality procedures associating assigned product line in a lean manufacturing environment
• Maintain acceptable defect rates
• Successful completion of training requirements
• Where applicable, trained in special processes such as but not limited to welding or non-destructive testing
Desired Qualifications:*• Demonstrate ability to safely complete job tasks utilizing manual or automated equipment as well as use of gages needed for inspection or testing as required
• Demonstrate ability to document and record inspection results per in-house procedures
• Successful completion of quality audit to internal procedures on assigned product line and/or use of equipment

 

For consideration to this position, please contact Earl Sawyer at esawyer@pdstech.com or 843-277-6616.


 
Job Number: 1710067688
Job Location: KS City, MO
Duration: 12 months
Input Date: 05/03/2017
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000012YKOAA2&URLSource=cjhunter

Mechanic Technician II

Description:
PDS Tech is seeking several mechanics for positions in Kansas City.
Must have steel toed shoes/boots; all assignments are one year in length
3rd Shift Position
 
 
 
Work may involve used mechanical parts. Aprons & Coveralls are available to contractors; must have steel toed shoes
  
 Operation of Overhead Cranes is involved in this job
Essential Functions / Responsibilities:*Perform disassembly, clean, requalification, rework and assembly operations on Traction Motor Combo component utilizing manual equipment and automated equipment in accordance with manufacturing and quality procedures. Inspect work completed on components to internal inspection criteria for compliance to quality or engineering requirements. Responsible to perform work in a safe manor in support of lean manufacturing principals such as but not limited to 5s or single piece flow to required takt time. In some cases may have to perform special process such as welding or non-destructive testing which will require special process training or certification. Operation of overhead cranes
Basic Qualifications / Requirements:*• Must have high school diploma or GED at a minimum
Knowledge of EHS procedures and policies
• Knowledge of safe use manual equipment and hand tools for assigned product lines.
• Working knowledge of use of inspection measurement equipment
• Understanding of all manufacturing and quality procedures associating assigned product line in a lean manufacturing environment
• Maintain acceptable defect rates
• Successful completion of training requirements
• Where applicable, trained in special processes such as but not limited to welding or non-destructive testing
Desired Qualifications:*• Demonstrate ability to safely complete job tasks utilizing manual or automated equipment as well as use of gages needed for inspection or testing as required
• Demonstrate ability to document and record inspection results per in-house procedures
• Successful completion of quality audit to internal procedures on assigned product line and/or use of equipment



For consideration to this position, please contact Eric Khassanov at ekhassanov@pdstech.com or 843-277-6611.
 

 
Job Number: 1610059718
Job Location: KS City, MO
Duration: 12 months
Input Date: 11/07/2016
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002Fr1dAAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical 2D and 3D Engineering Checker

Description:
Mechanical 2D and 3D Engineering Checker
Savannah, GA
Rate: $55-$63

Unique Skills:

Required Check 2D engineering data and 3D models for conformance to Company requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of GAC parts list & PdocM, a plus. Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Other duties as assigned.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7821
Job Location: Savannah, GA
Rate: $55-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Aircraft Interiors Eng Contract Lead

Description:
UNIQUE SKILLS
Ideal Candidates will have experience leading a mechanical engineering team that are developing Aircraft Cabin Interiors and Systems to include but not limited to: - Seats - Galley - Lavs - Closets - Crew rest areas - LRU installations - Liners - Water System - Waste System - Mechanism design and validation - Prototype development Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.

ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-775-112881
Job Location: Southeast
Rate: $70.00 to $77.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/19/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Aircraft Interiors Engineering Contract Lead

Description:
Mechanical Aircraft Interiors Engineering Contract Lead

Location: Savannah, GA
Pay Rate: $70/hr - $77/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Ideal Candidates will have experience leading a mechanical engineering team that are developing Aircraft Cabin Interiors and Systems to include but not limited to:
- Seats
- Galley
- Lavs
- Closets
- Crew rest areas
- LRU installations
- Liners
- Water System
- Waste System
- Mechanism design and validation
- Prototype development

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7735
Job Location: Savannah, GA
Rate: $70-$77
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/10/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Seeking a Mechanical Design Engineer - Level 2 for an opening in Dallax, TX.

RESPONSIBILITIES:
Mechanical Design Engineer to support the Tactical Missiles Advanced Programs (TMAP) area design effort. The candidate will to work to define an operational system (OS) booster and warhead concept for a new missile system. The candidate will work with Solid Rocket Motor (SRM) suppliers to evaluate designs, perform detailed design of the Control Section Assembly, Booster Separation System, Booster to Glider Separation System, and vehicle to launcher rack interface. The engineer must be proficient in Pro-E/CREO; have good communication skills, and be able to work with internal and external customers. Tasks assigned may include generation of Interface Control Drawings (ICD), generation of Instructional Engineering Release (IER), creation of solid models and drawings, and performing tolerance analyses. Tasks will include conceptual and detail design of missile integration concept components, systems, and subsystems, and creation of 3D solid models and 2D drawings. Effort will require coordination of design(s) with other mechanical / electrical disciplines, and familiarity with missile to aircraft integration concepts.

REQUIRED EXPERIENCE:
Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, knowledge of Geometric Dimensioning and Tolerancing, and experience with manufacturing engineering and fabrication processes.

PREFERRED EXPERIENCE:
Familiarity with Microsoft Office applications is desired.

EDUCATION:
Candidate should have a Bachelors of Science degree in Mechanical Engineering, or 10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer / CREO 3.

WORK HOURS:
9/80, 1st Shift, Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 164789
Job Location: Dallas, TX
Duration: 11 Months
Start Date: ASAP
Input Date: 08/31/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 2

Description:
Location: Orlando, FL
Rate: $55.00 - $65.00/HR
Duration: 1 year contract
Shift: 1st Shift

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or have had one within the last 2 years**

Description:
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- Work with Mechanical Engineering Lead to assist in the mechanical design, engineering documentation, trade studies, and drawing release for the selected program.
- Verify tolerance analysis on system components has been performed.
- Work with Designer's to ensure the design meets all requirements including Safety of Flight (SOF).
- Additionally, the checker will work with the Liaison Engineer to ensure the work flows in PLM are properly maintained.
- Work closely with Mechanical Engineering to support all program objectives.

Skill/Experience/Education
Mandatory:
**MUST have an Active Secret Clearance or have had one within the last 2 years**
- BS degree in Mechanical Engineering, or equivalent related education and experience.
- Experience with all aspects of mechanical design, including layout, documentation and checking (per IAW ASME Y14.24) and be familiar with MIL-T-3100 and MIL-STD-100.
- Five (5) to ten (10) years experience of creating Pro-E / CATIA drawing and drawing release.
- Proficiency with Pro-E / Windchill is required.
- Knowledge of LMC drawing release procedures is desired.
- Good knowledge of all aspects of Mechanical engineering is essential.
- Previous LMC experience is a plus.
 
Job Number: 7845
Job Location: Orlando, FL
Rate: $55.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 09/28/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 2

Description:
Mechanical Design Engineer - Level 2

Location: Orlando, FL
Rate: $60.00 - $65.00/HR
1 year contract
1st Shift

**Must have a current ACTIVE secret clearance**

Description:
- Work with Mechanical Engineering Lead to assist in the mechanical design, engineering documentation, trade studies, and drawing release for the System.
- Verify tolerance analysis on system components has been performed.
- Work with Designer’s to ensure the design meets all requirements including Safety of Flight (SOF).
- Additionally, the checker will work with the Liaison Engineer to ensure the work flows in PLM are properly maintained.
- Work closely with Mechanical Engineering to support all program objectives.

Skill/Experience/Education
Mandatory:
- BS degree in Mechanical Engineering, or equivalent related education and experience.
- Experience with all aspects of mechanical design, including layout, documentation and checking IAW ASME Y14.24 and familiar with MIL-T-3100 and MIL-STD-100.
- Five (5) to ten (10) year’s experience of creating Pro-E/CATIA drawings and drawing release.
- Proficiency with Pro-E/Windchill and Intralink is required.
- Knowledge of LMC drawing release procedures is desired.
- Good knowledge of all aspects of Mechanical engineering is essential.
- Previous LMC experience is a plus.
 
Job Number: 7009
Job Location: Orlando, FL
Rate: $60.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 08/29/2017
Last Updated: 10/20/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 2 with active secret / Proficiency with Pro-E / Windchill is required / 4 openings FL

Description:
160231
Requirement #MFC-REQ-1479
Work Location Orlando, FL
Work Week9/80
Priority High
Needed Date 10/02/2017
End Date 10/01/2018
Number of Resources 4
Security Clearance Secret



Title: Mechanical Design Engineer - Level 2

Description
Work with Mechanical Engineering Lead to assist in the mechanical design, engineering documentation, trade studies, and drawing release for the selected program. Verify tolerance analysis on system components has been performed. Work with Designer's to ensure the design meets all requirements including Safety of Flight (SOF). Additionally, the checker will work with the Liaison Engineer to ensure the work flows in PLM are properly maintained. Work closely with Mechanical Engineering to support all program objectives.

Skill/Experience/Education

Mandatory:

BS degree in Mechanical Engineering, or equivalent related education and experience. Experience with all aspects of mechanical design, including layout, documentation and checking (per IAW ASME Y14.24) and be familiar with MIL-T-3100 and MIL-STD-100. Five to ten years experience of creating Pro-E / CATIA drawing and drawing release. Proficiency with Pro-E / Windchill is required. Knowledge of LMC drawing release procedures is desired. Good knowledge of all aspects of Mechanical engineering is essential. Must have a security clearance. Previous LMC experience is a plus.



Max Pay Rate 65.00 USD

Shift 1st Shift
OT Allowed No
Travel No
Non-Exempt
 
Job Number: JE-1479
Job Location: Orlando, FL
Rate: 65/hr max
Duration: 12 month contract
Input Date: 09/01/2017
Last Updated: 10/03/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer

Location: Savannah, GA
Pay Rate: $50/hr - $55/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Mechanical Engineer required for Completions Design / Aircraft Cabin Interiors.
-Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
-Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSUs, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
-Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
-Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
-Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
-Design Engineer will be required to liaison with the shop on engineering issues.
-Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
-Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
 
Job Number: 7648
Job Location: Savannah, GA
Rate: 50.00-55.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/17/2017
Last Updated: 09/21/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer - Tech Spec II

Savannah, GA
Rate: $60-$63
Long Term contract

Unique Skills:

Must be proficient in V4 and V5 Catia with Smarteam experience. Must have experience with design and Electrical Equipment Installations or Aircraft Mechanical Systems design. Previous Aircraft STC modification experience is desired. Previous Gulfstream Experience preferred. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7058
Job Location: Savannah, GA
Rate: $60-$63
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 10/03/2017
Last Updated: 10/06/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Mechanical Engineer

Description:

PDS Tech, Inc. is seeking a Mechanical Engineer for a position located in Kansas City, MO. 
Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

The Client's organization has several open opportunities for Mechanical Engineers.  We are seeking engineers who are interested in supporting one or more of the following areas:  product engineering, process engineering, purchased product engineering, systems engineering and mechanical testing.  Job title will be commiserate with level of experience. 

 
  • Completes assignments and provides detailed instructions in the design and/or project management of new and current projects, products, programs, components, tools and acceptance equipment under technical guidance of higher level engineers or departmental management
  • Participates in establishing operating procedures on new products and components
  • Assists in the development of test procedures and performance of routine to moderately complex engineering evaluation tests, product and process capability studies, quality audits, product or project data reviews, and other engineering evaluation work
  • Evaluates opportunities for defect prevention based on standard or accepted solutions
  • Prepares evaluation reports, analyzes discrepancies, and makes recommendations for product, test equipment, procedures and manufacturing or operating processes that improve productivity and quality and reduce flowtime
  • Assists in the preparation of product or project definitions, manufacturing drawings and specifications, and test equipment designs
  • Defines and acquires tooling, gaging and other equipment necessary to manufacture parts and to assure product quality
  • Interacts with design agencies, suppliers and/or internal organizations such as the Integrated Supply Chain to assist in resolving design, development, production and acceptance issues
  • Provides technical assistance in appropriate assigned field
  • Evaluates and makes recommendations regarding technological advances that improve productivity and quality,reduce flowtime, and enhance operational surety
  • May perform other duties as required
  • Conducts activities in a safe and healthy manner and works in accordance with established ES&H requirements to ensure the protection of associates, the public, and the environment. Takes actions necessary to stop work when an unsafe condition or action is identified. Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

Basic Qualifications: 
  • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
  • Bachelor of Science degree in Mechanical Engineering from an ABET accredited program or an equivalent ABET accredited engineering degree.
  • Minimum three (3) years of professional technical experience.
  • Proficiency in Microsoft Excel, Word and PowerPoint required

Additional Qualifications: 

  • Hands-on experience with 3D design software like Creo or SolidWorks
  • Effective verbal, written and presentation skills
  • Knowledge of continuous improvement methodologies including Six Sigma
  • Previous experience in a manufacturing environment
  • Experience in engineering related administrative activities such as configuration management, financial reporting, product testing procedures & data entry preferred
  • Proven ability in decision making and organization, planning and problem solving skills
  • Ability to work under minimal supervision, with latitude for independent action and decision making.
  • Good people skills, ability to motivate teams to produce on-target and timely results.
  • Demonstrate project/program management via multiple priorities/projects
  • Ability to plan and organize, demonstrate excellent time management and support several projects at once
  • Willingness to travel on occasion

 
Job Number: 1710068729
Job Location: KS City, MO
Duration: 6 months
Input Date: 05/26/2017
Last Updated: 09/24/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tanya James
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002JrH0AAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Level 2

Description:
Location: Orlando, FL
Rate: $50.00 - $60.00/HR
Duration: 1 year contract
Shift: 1st Shift

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or have had one within the last 2 years**

Job Description:
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- Selected candidate will perform all Liaison duties for the program.
- Candidate will closely interact with the Engineering team to ensure all required data is available for new drawing release and document revisions, interact with other functions like manufacturing, and subcontracts to process change requests, set up the Liaison process, track open items via page and line. - Selected individual must be proficient in the use of Windchill, Creo and Catia, have excellent verbal, presentation and written skills and be able to work with a diverse team of internal and external customers/suppliers.

Skill/Experience/Education
Mandatory:
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- BS degree in Mechanical Engineering, or equivalent related education and experience.
- CAD expertise per job description (Windchill, CREO and Catia).
- Knowledge of LMC drawing practices is desired, and previous LMC experience is a plus.
 
Job Number: 7844
Job Location: Orlando, FL
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 09/05/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Level 2

Description:
Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Duration: 3 month contract
Shift: 3rd Shift

**MUST have an Active Secret Clearance or to have had one within the last 2 years**

Job Description:
- Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy.
- Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines.

Skill/Experience/Education
Mandatory:
- Mechanical and or Electrical Engineer. C-Shift.
- On aircraft and off-aircraft operational requirements.
- Schedule In this role, The employee will review designs for ease of manufacturing and work closely with design engineering for improvements.
- The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions.
- This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists.
- The employee will work with manufacturing on issues and process improvements
- Active Secret Security Clearance within the last 2 years.

Desired:
- Job scope experience
- Team Center Engineering experience
- Production Engineering experience
- Production Operations experience
- Mechanical Experience
- Electrical Experience
- Aircraft Experience
- Experience with Lean Six Sigma practices
- SOF CLSS contract, facility, and customer knowledge
- Ability to read and interpret engineering drawings
- Excellent verbal and written communications skills
 
Job Number: 7667
Job Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3 mos
Input Date: 07/24/2017
Last Updated: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Level 2 with active secret / Windchill Creo and Catia FL

Description:
160232
Requirement #MFC-REQ-1478
Work Location Orlando, FL
Work Week 9/80
Needed Date 10/02/2017
End Date 10/02/2018
Number of Resources 1
Security Clearance Secret

Title:Mechanical Engineer - Level 2

Description
Selected candidate will perform all Liaison duties for the program. Candidate will closely interact with the Engineering team to ensure all required data is available for new drawing release and document revisions, interact with other functions like manufacturing, and subcontracts to process change requests, set up the Liaison process, track open items via page and line. Selected individual must be proficient in the use of Windchill, Creo and Catia, have excellent verbal, presentation and written skills and be able to work with a diverse team of internal and external customers/suppliers. Must be able to obtain a security clearance.

Skill/Experience/Education
Mandatory:

BS degree in Mechanical Engineering, or equivalent related education and experience. CAD expertise per job description. Knowledge of LMC drawing practices is desired, and previous LMC experience is a plus. Must have a security clearance.



Max Pay Rate 60.00 USD

Shift 1st Shift
OT Allowed No
Travel No
Non-Exempt
 
Job Number: JE-1478
Job Location: Orlando, FL
Rate: 60/hr max
Duration: 12 month contract
Input Date: 09/06/2017
Last Updated: 10/03/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Mechanical Engineer - Level 3 - FL - C

Description:
Chipton-Ross is seeking a Mechanical Engineer - Level 3 for an opening in Fort Walton Beach, FL.

RESPONSIBILITIES:
The position will require the individual to hold a major contributing role within the overall Engineering organization; as such they will be expected to prepare and present materials for peer reviews, design reviews, DFM discussion, and group discussions on technical aspects of the design. The Engineer will be expected to lead the design effort for system sub-assemblies or potentially for small self-contained systems. The designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards. The individual will be expected to work cross functionally within the Engineering organization as well as across the company.
Ongoing job responsibilities include:
o Designs components and assemblies using commodities including sheet metal & machined components
o Provides technical experience for design and manufacturing related matters
o Mechanical design and associated program deliverables on subassemblies or small self-contained systems
o Design and release drawings to meet internal and external commitments.
o Updates on project progress and roadblocks.
o Provide input to System Engineer for design specifications for components, assembled parts and equipment for design validation.
o Demonstrate manufacturing feasibility and technical justification for selected design approach
o Support product lifecycle management ushering a product from concept through production implementation.

REQUIRED EXPERIENCE:
-CATIA V5
-MS Office Suite expertize

PREFERRED EXPERIENCE:
-TeamCenter Engineering experience
-C130 Familiarity
-JobScope /IT reports experience

EDUCATION:
Bachelor's Degree

WORK HOURS:
5/40, 1st Shift, Full-Time


MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 164393
Job Location: Fort Walton Beach, FL
Rate: $35 to $45.00 DOE
Duration: 12 Months
Input Date: 07/24/2017
Last Updated: 09/24/2018
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer and 2D/3D Checking Engineering Contractor

Description:
UNIQUE SKILLS
Ideal Candidates will have mechanical engineering and 2D/3D checking experience with Aircraft Cabin Interiors and Systems to include but not limited to: - Seats - Galley - Lavs - LRU installations - Liners - Water System - Waste System - Mechanism design and validation - Prototype development Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.

ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-723-102180
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 02/28/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
With sustaining experience
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers BSME -- Pro/E

Description:
2000 hours Pro/E
 
Job Location: CT/IN/FL/OR
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Sustaining Engineer - hydraulic

Description:
Johnson Service Group (JSG) is searching for a Mechanical Sustaining Engineer, capable of providing technical guidance to assure the performance of hydraulic actuation components currently in service on commercial and military aircraft.

Summary of Job Scopes:

3-6+ years of related mechanical sustaining engineering experience, ideally with hydraulic actuators and hydraulic control valves, or similar products for the Aerospace Commercial and and Defense industries.
Requires mechanical engineering expertise with hydraulic control valves and hydraulic actuators.
Working knowledge of gears is a plus.
A qualified candidate will interface with the Quality Assurance and After-Market Organizations to support the investigation of field failures or internal proposed changes.
Responsible for interfacing with design and analysis engineering organizations to implement proposed design changes.
Requires working knowledge and understanding of requi